[mcs814x] use the recommended ARM I/O accessors

use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33330 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 39 insertions, 36 deletions

diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/clock.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/clock.c
index 88ecdffbb2..413bfecaa1 100644
--- a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/clock.c
+++ b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/clock.c
@@ -54,13 +54,13 @@ static int clk_local_onoff_enable(struct clk *clk, int enable)
 	if (!clk->enable_reg)
 		return 0;
 
-	tmp = __raw_readl(mcs814x_sysdbg_base + clk->enable_reg);
+	tmp = readl_relaxed(mcs814x_sysdbg_base + clk->enable_reg);
 	if (!enable)
 		tmp &= ~clk->enable_mask;
 	else
 		tmp |= clk->enable_mask;
 
-	__raw_writel(tmp, mcs814x_sysdbg_base + clk->enable_reg);
+	writel_relaxed(tmp, mcs814x_sysdbg_base + clk->enable_reg);
 
 	return 0;
 }
@@ -254,7 +254,7 @@ void __init mcs814x_clk_init(void)
 	clkdev_add_table(mcs814x_chip_clks, ARRAY_SIZE(mcs814x_chip_clks));
 
 	/* read the bootstrap registers to know the exact clocking scheme */
-	bs1 = __raw_readl(mcs814x_sysdbg_base + SYSDBG_BS1);
+	bs1 = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS1);
 	cpu_freq = (bs1 >> CPU_FREQ_SHIFT) & CPU_FREQ_MASK;
 
 	pr_info("CPU frequency: %lu (kHz)\n", cpu_freq_table[cpu_freq]);
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.c
index 53d3521dc6..b679c04429 100644
--- a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.c
+++ b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/common.c
@@ -67,22 +67,22 @@ static void mcs814x_eth_hardware_filter_set(u8 value)
 {
 	u32 reg;
 
-	reg = __raw_readl(MCS814X_VIRT_BASE + MCS814X_DBGLED);
+	reg = readl_relaxed(MCS814X_VIRT_BASE + MCS814X_DBGLED);
 	if (value)
 		reg |= 0x80;
 	else
 		reg &= ~0x80;
-	__raw_writel(reg, MCS814X_VIRT_BASE + MCS814X_DBGLED);
+	writel_relaxed(reg, MCS814X_VIRT_BASE + MCS814X_DBGLED);
 }
 
 static void mcs814x_eth_led_cfg_set(u8 cfg)
 {
 	u32 reg;
 
-	reg = __raw_readl(mcs814x_sysdbg_base + SYSDBG_BS2);
+	reg = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS2);
 	reg &= ~LED_CFG_MASK;
 	reg |= cfg;
-	__raw_writel(reg, mcs814x_sysdbg_base + SYSDBG_BS2);
+	writel_relaxed(reg, mcs814x_sysdbg_base + SYSDBG_BS2);
 }
 
 static void mcs814x_eth_buffer_shifting_set(u8 value)
@@ -134,7 +134,7 @@ void __init mcs814x_init_machine(void)
 	u32 bs2, cpu_mode;
 	int gpio;
 
-	bs2 = __raw_readl(mcs814x_sysdbg_base + SYSDBG_BS2);
+	bs2 = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS2);
 	cpu_mode = (bs2 >> CPU_MODE_SHIFT) & CPU_MODE_MASK;
 
 	pr_info("CPU mode: %s\n", cpu_modes[cpu_mode].name);
@@ -161,5 +161,5 @@ void __init mcs814x_map_io(void)
 
 void mcs814x_restart(char mode, const char *cmd)
 {
-	__raw_writel(~(1 << 31), mcs814x_sysdbg_base);
+	writel_relaxed(~(1 << 31), mcs814x_sysdbg_base);
 }
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/irq.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/irq.c
index e2ce52a69a..c1e48927de 100644
--- a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/irq.c
+++ b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/irq.c
@@ -40,7 +40,7 @@ static void __init mcs814x_alloc_gc(void __iomem *base, unsigned int irq_start,
 		IRQ_NOREQUEST, 0);
 
 	/* Clear all interrupts */
-	__raw_writel(0xffffffff, base + MCS814X_IRQ_ICR);
+	writel_relaxed(0xffffffff, base + MCS814X_IRQ_ICR);
 }
 
 static const struct of_device_id mcs814x_intc_ids[] = {
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/pci.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/pci.c
index a871aa86c3..3606fe84e4 100644
--- a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/pci.c
+++ b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/pci.c
@@ -93,13 +93,13 @@ static int mcs8140_pci_host_status(void)
 {
 	u32 host_status;
 
-	host_status = __raw_readl(mcs8140_pci_master_base + PCI_IF_CONFIG);
+	host_status = readl_relaxed(mcs8140_pci_master_base + PCI_IF_CONFIG);
 	if (host_status & PCI_FATAL_ERROR) {
-		__raw_writel(host_status & 0xfffffff0,
+		writel_relaxed(host_status & 0xfffffff0,
 			mcs8140_pci_master_base + PCI_IF_CONFIG);
 		/* flush write */
 		host_status =
-			__raw_readl(mcs8140_pci_master_base + PCI_IF_CONFIG);
+			readl_relaxed(mcs8140_pci_master_base + PCI_IF_CONFIG);
 		return 1;
 	}
 
@@ -124,7 +124,7 @@ static int mcs8140_pci_read_config(struct pci_bus *bus,
 			break;
 		default:
 			addr &= ~3;
-			v = __raw_readl(addr);
+			v = readl_relaxed(addr);
 			break;
 		}
 	} else
@@ -140,10 +140,10 @@ static int mcs8140_pci_read_config(struct pci_bus *bus,
 
 static void mcs8140_eeprom_emu_init(void)
 {
-	__raw_writel(0x0000000F, mcs8140_eeprom_emu_base + EPRM_SDRAM_FUNC0);
-	__raw_writel(0x08000000, MCS8140_PCI_CFG_VIRT_BASE + 0x10);
+	writel_relaxed(0x0000000F, mcs8140_eeprom_emu_base + EPRM_SDRAM_FUNC0);
+	writel_relaxed(0x08000000, MCS8140_PCI_CFG_VIRT_BASE + 0x10);
 	/* Set the DONE bit of the EEPROM emulator */
-	__raw_writel(0x01, mcs8140_eeprom_emu_base + EPRM_DONE);
+	writel_relaxed(0x01, mcs8140_eeprom_emu_base + EPRM_DONE);
 }
 
 static int mcs8140_pci_write_config(struct pci_bus *bus,
@@ -161,7 +161,7 @@ static int mcs8140_pci_write_config(struct pci_bus *bus,
 			__raw_writew((u16)val, addr);
 			break;
 		case 4:
-			__raw_writel(val, addr);
+			writel_relaxed(val, addr);
 			break;
 		}
 	}
@@ -260,7 +260,7 @@ int __init pci_mcs8140_setup(int nr, struct pci_sys_data *sys)
 		goto out;
 	}
 
-	val = __raw_readl(MCS8140_PCI_CFG_VIRT_BASE);
+	val = readl_relaxed(MCS8140_PCI_CFG_VIRT_BASE);
 	if (val != MCS8140_PCI_DEVICE_ID) {
 		pr_err("cannot find MCS8140 PCI Core: %08x\n", val);
 		ret = -EIO;
@@ -269,11 +269,11 @@ int __init pci_mcs8140_setup(int nr, struct pci_sys_data *sys)
 
 	pr_info("MCS8140 PCI core found\n");
 
-	val = __raw_readl(MCS8140_PCI_CFG_VIRT_BASE + PCI_COMMAND);
+	val = readl_relaxed(MCS8140_PCI_CFG_VIRT_BASE + PCI_COMMAND);
 	/* Added to support wireless cards */
-	__raw_writel(0, MCS8140_PCI_CFG_VIRT_BASE + 0x40);
-	__raw_writel(val | 0x147, MCS8140_PCI_CFG_VIRT_BASE + PCI_COMMAND);
-	val = __raw_readl(MCS8140_PCI_CFG_VIRT_BASE + PCI_COMMAND);
+	writel_relaxed(0, MCS8140_PCI_CFG_VIRT_BASE + 0x40);
+	writel_relaxed(val | 0x147, MCS8140_PCI_CFG_VIRT_BASE + PCI_COMMAND);
+	val = readl_relaxed(MCS8140_PCI_CFG_VIRT_BASE + PCI_COMMAND);
 	ret = 1;
 out:
 	return ret;
@@ -302,14 +302,14 @@ static irqreturn_t mcs8140_pci_abort_interrupt(int irq, void *dummy)
 {
 	u32 word;
 
-	word = __raw_readl(mcs8140_pci_master_base + PCI_IF_CONFIG);
+	word = readl_relaxed(mcs8140_pci_master_base + PCI_IF_CONFIG);
 	if (!(word & (1 << 24)))
 		return IRQ_NONE;
 
-	__raw_writel(word & 0xfffffff0,
+	writel_relaxed(word & 0xfffffff0,
 		mcs8140_pci_master_base + PCI_IF_CONFIG);
 	/* flush write */
-	word = __raw_readl(mcs8140_pci_master_base + PCI_IF_CONFIG);
+	word = readl_relaxed(mcs8140_pci_master_base + PCI_IF_CONFIG);
 
 	return IRQ_HANDLED;
 }
@@ -319,12 +319,12 @@ static int mcs8140_pci_abort_irq_init(int irq)
 	u32 word;
 
 	/* Enable Interrupt in PCI Master Core */
-	word = __raw_readl(mcs8140_pci_master_base + PCI_IF_CONFIG);
+	word = readl_relaxed(mcs8140_pci_master_base + PCI_IF_CONFIG);
 	word |= (1 << 24);
-	__raw_writel(word, mcs8140_pci_master_base + PCI_IF_CONFIG);
+	writel_relaxed(word, mcs8140_pci_master_base + PCI_IF_CONFIG);
 
 	/* flush write */
-	word = __raw_readl(mcs8140_pci_master_base + PCI_IF_CONFIG);
+	word = readl_relaxed(mcs8140_pci_master_base + PCI_IF_CONFIG);
 
 	return request_irq(irq, mcs8140_pci_abort_interrupt, 0,
 			"PCI abort", NULL);
diff --git a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/timer.c b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/timer.c
index e1f3730383..0947fb245f 100644
--- a/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/timer.c
+++ b/target/linux/mcs814x/files-3.3/arch/arm/mach-mcs814x/timer.c
@@ -22,6 +22,8 @@
 /* Timer block registers */
 #define TIMER_VAL	0x00
 #define TIMER_CTL	0x04
+#define  TIMER_CTL_EN	0x01
+#define  TIMER_CTL_DBG	0x02
 
 static u32 last_reload;
 static u32 timer_correct;
@@ -40,7 +42,7 @@ static inline unsigned long ticks2usecs(u32 x)
  */
 static unsigned long mcs814x_gettimeoffset(void)
 {
-	u32 ticks = __raw_readl(mcs814x_timer_base + TIMER_VAL);
+	u32 ticks = readl_relaxed(mcs814x_timer_base + TIMER_VAL);
 
 	if (ticks < last_reload)
 		return ticks2usecs(ticks + (u32)(0xffffffff - last_reload));
@@ -51,7 +53,7 @@ static unsigned long mcs814x_gettimeoffset(void)
 
 static irqreturn_t mcs814x_timer_interrupt(int irq, void *dev_id)
 {
-	u32 count = __raw_readl(mcs814x_timer_base + TIMER_VAL);
+	u32 count = readl_relaxed(mcs814x_timer_base + TIMER_VAL);
 
 	/* take into account delay up to this moment */
 	last_reload = count + timer_correct + timer_reload_value;
@@ -60,9 +62,9 @@ static irqreturn_t mcs814x_timer_interrupt(int irq, void *dev_id)
 		last_reload = timer_reload_value;
 	} else {
 		if (timer_correct == 0)
-			timer_correct = __raw_readl(mcs814x_timer_base + TIMER_VAL) - count;
+			timer_correct = readl_relaxed(mcs814x_timer_base + TIMER_VAL) - count;
 	}
-	__raw_writel(last_reload, mcs814x_timer_base + TIMER_VAL);
+	writel_relaxed(last_reload, mcs814x_timer_base + TIMER_VAL);
 
 	timer_tick();
 
@@ -118,13 +120,14 @@ static void __init mcs814x_timer_init(void)
 	timer_reload_value = 0xffffffff - (clock_rate / HZ);
 
 	/* disable timer */
-	__raw_writel(0, mcs814x_timer_base + TIMER_CTL);
-	__raw_writel(timer_reload_value, mcs814x_timer_base + TIMER_VAL);
+	writel_relaxed(~TIMER_CTL_EN, mcs814x_timer_base + TIMER_CTL);
+	writel_relaxed(timer_reload_value, mcs814x_timer_base + TIMER_VAL);
 	last_reload = timer_reload_value;
 
 	setup_irq(mcs814x_timer_irq.irq, &mcs814x_timer_irq);
 	/* enable timer, stop timer in debug mode */
-	__raw_writel(0x03, mcs814x_timer_base + TIMER_CTL);
+	writel_relaxed(TIMER_CTL_EN | TIMER_CTL_DBG,
+		mcs814x_timer_base + TIMER_CTL);
 }
 
 struct sys_timer mcs814x_timer = {