fix Magicbox for .21 and convert to the new structure

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7328 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 296 insertions, 0 deletions

diff --git a/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.c b/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.c
new file mode 100644
index 0000000000..470fbc4e08
--- /dev/null
+++ b/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.c
@@ -0,0 +1,249 @@
+/*
+ * Support for IBM PPC 405EP-based MagicBox board 
+ * Copyright (C) 2006  Karol Lewandowski
+ *
+ * Heavily based on bubinga.c
+ *
+ * Author: SAW (IBM), derived from walnut.c.
+ *         Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/kgdb.h>
+#include <asm/ocp.h>
+#include <asm/ibm_ocp_pci.h>
+
+#include <platforms/4xx/ibm405ep.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern bd_t __res;
+
+/* Some IRQs unique to board
+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
+ */
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	    /*
+	     *      PCI IDSEL/INTPIN->INTLINE
+	     *      A       B       C       D
+	     */
+	{
+		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
+		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
+		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
+		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
+	};
+
+	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+};
+
+
+/* The serial clock for the chip is an internal clock determined by
+ * different clock speeds/dividers.
+ * Calculate the proper input baud rate and setup the serial driver.
+ */
+static void __init
+magicbox_early_serial_map(void)
+{
+	u32 uart_div;
+	int uart_clock;
+	struct uart_port port;
+
+         /* Calculate the serial clock input frequency
+          *
+          * The base baud is the PLL OUTA (provided in the board info
+          * structure) divided by the external UART Divisor, divided
+          * by 16.
+          */
+	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
+	uart_clock = __res.bi_procfreq / uart_div;
+
+	/* Setup serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = (void*)ACTING_UART0_IO_BASE;
+	port.irq = ACTING_UART0_INT;
+	port.uartclk = uart_clock;
+	port.regshift = 0;
+	port.iotype = SERIAL_IO_MEM;
+	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 0 failed\n");
+	}
+
+	port.membase = (void*)ACTING_UART1_IO_BASE;
+	port.irq = ACTING_UART1_INT;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 1 failed\n");
+	}
+}
+
+void __init
+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
+{
+	unsigned int bar_response, bar;
+	/*
+	 * Expected PCI mapping:
+	 *
+	 *  PLB addr             PCI memory addr
+	 *  ---------------------       ---------------------
+	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
+	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
+	 *
+	 *  PLB addr             PCI io addr
+	 *  ---------------------       ---------------------
+	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
+	 *
+	 * The following code is simplified by assuming that the bootrom
+	 * has been well behaved in following this mapping.
+	 */
+
+#ifdef DEBUG
+	int i;
+
+	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
+	printk("PCI bridge regs before fixup \n");
+	for (i = 0; i <= 3; i++) {
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+	}
+	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+
+	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
+
+	/* Disable region first */
+	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
+	/* PLB starting addr, PCI: 0x80000000 */
+	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
+	/* PCI start addr, 0x80000000 */
+	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
+	/* 512MB range of PLB to PCI */
+	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
+	/* Enable no pre-fetch, enable region */
+	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
+						(PPC405_PCI_UPPER_MEM -
+						 PPC405_PCI_MEM_BASE)) | 0x01));
+
+	/* Disable region one */
+	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
+
+	/* Disable region two */
+	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+	out_le32((void *) &(pcip->ptm2la), 0x00000000);
+
+	/* Zero config bars */
+	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+		early_write_config_dword(hose, hose->first_busno,
+					 PCI_FUNC(hose->first_busno), bar,
+					 0x00000000);
+		early_read_config_dword(hose, hose->first_busno,
+					PCI_FUNC(hose->first_busno), bar,
+					&bar_response);
+		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+		    hose->first_busno, PCI_SLOT(hose->first_busno),
+		    PCI_FUNC(hose->first_busno), bar, bar_response);
+	}
+	/* end work arround */
+
+#ifdef DEBUG
+	printk("PCI bridge regs after fixup \n");
+	for (i = 0; i <= 3; i++) {
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+	}
+	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif /* DEBUG */
+}
+
+void __init
+magicbox_setup_arch(void)
+{
+	ppc4xx_setup_arch();
+
+	ibm_ocp_set_emac(0, 1);
+
+	magicbox_early_serial_map();
+
+	/* Identify the system */
+	printk("MagicBox port (C) 2005 Karol Lewandowski <kl@jasmine.eu.org>\n");
+}
+
+void __init
+magicbox_map_io(void)
+{
+	ppc4xx_map_io();
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+	ppc4xx_init(r3, r4, r5, r6, r7);
+
+	ppc_md.setup_arch = magicbox_setup_arch;
+	ppc_md.setup_io_mappings = magicbox_map_io;
+
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = bubinga_early_serial_map;
+#endif
+
+}
diff --git a/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.h b/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.h
new file mode 100644
index 0000000000..6ce1e5b8ce
--- /dev/null
+++ b/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.h
@@ -0,0 +1,47 @@
+/*
+ * Support for IBM PPC 405EP-based MagicBox board
+ *
+ * Heavily based on bubinga.h
+ *
+ *
+ * Author: SAW (IBM), derived from walnut.h.
+ *         Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __MAGICBOX_H__
+#define __MAGICBOX_H__
+
+#include <linux/autoconf.h>
+#include <platforms/4xx/ibm405ep.h>
+#include <asm/ppcboot.h>
+
+/* Memory map for the "MagicBox" 405EP evaluation board -- generic 4xx. */
+
+/* The UART clock is based off an internal clock -
+ * define BASE_BAUD based on the internal clock and divider(s).
+ * Since BASE_BAUD must be a constant, we will initialize it
+ * using clock/divider values which OpenBIOS initializes
+ * for typical configurations at various CPU speeds.
+ * The base baud is calculated as (FWDA / EXT UART DIV / 16)
+ */
+#define BASE_BAUD       0
+
+/* Flash */
+#define PPC40x_FPGA_BASE	0xF0300000
+#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW	0xFFF00000
+#define PPC40x_FLASH_HIGH	0xFFF80000
+#define PPC40x_FLASH_SIZE	0x80000
+
+#define PPC4xx_MACHINE_NAME	"MagicBox"
+
+#endif /* __MAGICBOX_H__ */
+#endif /* __KERNEL__ */