summaryrefslogtreecommitdiff
path: root/target/linux/linux-2.6/patches
diff options
context:
space:
mode:
authorkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2005-09-21 09:55:03 +0000
committerkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2005-09-21 09:55:03 +0000
commita61fc4957673dc6190d57c8199957ea8746cbf63 (patch)
tree538828bb1ed9148380f0edaa678e69097d6e70d6 /target/linux/linux-2.6/patches
parent41aaf2f0d9f7240f66df7e9542e782dc400197d0 (diff)
move diag module outside of kernel directory
git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@1968 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/linux-2.6/patches')
-rw-r--r--target/linux/linux-2.6/patches/brcm/002-diag_led.patch288
1 files changed, 0 insertions, 288 deletions
diff --git a/target/linux/linux-2.6/patches/brcm/002-diag_led.patch b/target/linux/linux-2.6/patches/brcm/002-diag_led.patch
deleted file mode 100644
index a0f36e669c..0000000000
--- a/target/linux/linux-2.6/patches/brcm/002-diag_led.patch
+++ /dev/null
@@ -1,288 +0,0 @@
-diff -Nur linux-2.6.12.5/drivers/net/Kconfig linux-2.6.12.5-diag/drivers/net/Kconfig
---- linux-2.6.12.5/drivers/net/Kconfig 2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-diag/drivers/net/Kconfig 2005-09-10 23:08:53.209908656 +0200
-@@ -41,6 +41,11 @@
- Instead of 'dummy', the devices will then be called 'dummy0',
- 'dummy1' etc.
-
-+config DIAG_LED
-+ tristate "Led driver for Broadcom BCM97xx"
-+ ---help---
-+ Say m if you like the led to signal status of operation.
-+
- config BONDING
- tristate "Bonding driver support"
- depends on NETDEVICES
-diff -Nur linux-2.6.12.5/drivers/net/Makefile linux-2.6.12.5-diag/drivers/net/Makefile
---- linux-2.6.12.5/drivers/net/Makefile 2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-diag/drivers/net/Makefile 2005-09-08 17:49:02.249278160 +0200
-@@ -1,6 +1,7 @@
- #
- # Makefile for the Linux network (ethercard) device drivers.
- #
-+obj-$(CONFIG_DIAG_LED) += diag/
-
- ifeq ($(CONFIG_ISDN_PPP),y)
- obj-$(CONFIG_ISDN) += slhc.o
-diff -Nur linux-2.6.12.5/drivers/net/diag/Makefile linux-2.6.12.5-diag/drivers/net/diag/Makefile
---- linux-2.6.12.5/drivers/net/diag/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-diag/drivers/net/diag/Makefile 2005-09-10 19:45:26.596290216 +0200
-@@ -0,0 +1,5 @@
-+#$Id$
-+
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
-+
-+obj-$(CONFIG_DIAG_LED) += diag.o
-diff -Nur linux-2.6.12.5/drivers/net/diag/diag.c linux-2.6.12.5-diag/drivers/net/diag/diag.c
---- linux-2.6.12.5/drivers/net/diag/diag.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-diag/drivers/net/diag/diag.c 2005-09-10 18:51:02.727849016 +0200
-@@ -0,0 +1,249 @@
-+/*
-+ * diag_led.c - replacement diag module
-+ *
-+ * Copyright (C) 2004 Mike Baker,
-+ * Imre Kaloz <kaloz@dune.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * $Id$
-+ */
-+
-+/*
-+ * ChangeLog:
-+ * 2004/03/28 initial release
-+ * 2004/08/26 asus & buffalo support added
-+ * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
-+ * 2005/04/13 added licensing informations
-+ * 2005/04/18 base reset polarity off initial readings
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/sysctl.h>
-+#include <asm/io.h>
-+#include <typedefs.h>
-+#include <bcmdevs.h>
-+#include <sbutils.h>
-+
-+extern char * nvram_get(const char *name);
-+static void *sbh;
-+
-+// v2.x - - - - -
-+#define DIAG_GPIO (1<<1)
-+#define DMZ_GPIO (1<<7)
-+
-+/*
-+static void set_gpio(uint32 mask, uint32 value) {
-+ sb_gpiocontrol(sbh,mask,0);
-+ sb_gpioouten(sbh,mask,mask);
-+ sb_gpioout(sbh,mask,value);
-+}
-+
-+static void v2_set_diag(u8 state) {
-+ set_gpio(DIAG_GPIO,state);
-+}
-+static void v2_set_dmz(u8 state) {
-+ set_gpio(DMZ_GPIO,state);
-+}
-+*/
-+
-+/*
-+// v1.x - - - - -
-+#define LED_DIAG 0x13
-+#define LED_DMZ 0x12
-+
-+static void v1_set_diag(u8 state) {
-+ if (!state) {
-+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
-+ } else {
-+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
-+ }
-+}
-+static void v1_set_dmz(u8 state) {
-+ if (!state) {
-+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
-+ } else {
-+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
-+ }
-+}
-+*/
-+
-+// - - - - -
-+static void ignore(u8 ignored) {};
-+
-+// - - - - -
-+#define BIT_DMZ 0x01
-+#define BIT_DIAG 0x04
-+
-+void (*set_diag)(u8 state);
-+void (*set_dmz)(u8 state);
-+
-+static unsigned int diag = 0;
-+
-+static void diag_change()
-+{
-+ set_diag(0xFF); // off
-+ set_dmz(0xFF); // off
-+
-+ if(diag & BIT_DIAG)
-+ set_diag(0x00); // on
-+ if(diag & BIT_DMZ)
-+ set_dmz(0x00); // on
-+}
-+
-+static int proc_diag(ctl_table *table, int write, struct file *filp,
-+ void *buffer, size_t *lenp, loff_t *ppos)
-+{
-+ int r;
-+ r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
-+ if (write && !r) {
-+ diag_change();
-+ }
-+ return r;
-+}
-+
-+// - - - - -
-+static unsigned char reset_gpio = 0;
-+static unsigned char reset_polarity = 0;
-+static unsigned int reset = 0;
-+
-+static int proc_reset(ctl_table *table, int write, struct file *filp,
-+ void *buffer, size_t *lenp, loff_t *ppos)
-+{
-+
-+ if (reset_gpio) {
-+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
-+ sb_gpioouten(sbh,reset_gpio,0);
-+ reset=!(sb_gpioin(sbh)&reset_gpio);
-+
-+ if (reset_polarity) reset=!reset;
-+ } else {
-+ reset=0;
-+ }
-+
-+ return proc_dointvec(table, write, filp, buffer, lenp, ppos);
-+}
-+
-+// - - - - -
-+static struct ctl_table_header *diag_sysctl_header;
-+
-+static ctl_table sys_diag[] = {
-+ {
-+ ctl_name: 2000,
-+ procname: "diag",
-+ data: &diag,
-+ maxlen: sizeof(diag),
-+ mode: 0644,
-+ proc_handler: proc_diag
-+ },
-+ {
-+ ctl_name: 2001,
-+ procname: "reset",
-+ data: &reset,
-+ maxlen: sizeof(reset),
-+ mode: 0444,
-+ proc_handler: proc_reset
-+ },
-+ { 0 }
-+};
-+
-+static int __init diag_init()
-+{
-+ //char *buf;
-+ u32 board_type;
-+ sbh = sb_kattach();
-+ sb_gpiosetcore(sbh);
-+
-+ board_type = sb_boardtype(sbh);
-+ printk(KERN_INFO "diag boardtype: %08x\n",board_type);
-+
-+ set_diag=ignore;
-+ set_dmz=ignore;
-+
-+ /*
-+ buf=nvram_get("boardrev");
-+ if (((board_type & 0xf00) == 0x400) && strcmp(buf,"0x10")) {
-+ buf=nvram_get("boardtype")?:"";
-+ if (!strcmp(buf,"bcm94710dev")) {
-+ buf=nvram_get("boardnum")?:"";
-+ if (!strcmp(buf,"42")) {
-+ // wrt54g v1.x
-+ set_diag=v1_set_diag;
-+ set_dmz=v1_set_dmz;
-+ reset_gpio=(1<<6);
-+ }
-+ if (!strcmp(buf,"asusX")) {
-+ //asus wl-500g
-+ reset_gpio=(1<<6);
-+ }
-+ }
-+ if (!strcmp(buf,"bcm94710ap")) {
-+ buf=nvram_get("boardnum")?:"";
-+ if (!strcmp(buf,"42")) {
-+ // buffalo
-+ set_dmz=v2_set_dmz;
-+ reset_gpio=(1<<4);
-+ }
-+ if (!strcmp(buf,"44")) {
-+ //dell truemobile
-+ set_dmz=v2_set_dmz;
-+ reset_gpio=(1<<0);
-+ }
-+ }
-+ } else {
-+ buf=nvram_get("boardnum")?:"";
-+ if (!strcmp(buf,"42")) {
-+ //linksys
-+ set_diag=v2_set_diag;
-+ set_dmz=v2_set_dmz;
-+ reset_gpio=(1<<6);
-+ }
-+ if (!strcmp(buf,"44")) {
-+ //motorola
-+ reset_gpio=(1<<5);
-+ }
-+ if (!strcmp(buf,"00")) {
-+ //buffalo
-+ reset_gpio=(1<<7);
-+ }
-+ if (!strcmp(buf,"45")) {
-+ //wl-500g deluxe
-+ reset_gpio=(1<<6);
-+ }
-+ }
-+
-+ */
-+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
-+ sb_gpioouten(sbh,reset_gpio,0);
-+ reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
-+
-+ diag_sysctl_header = register_sysctl_table(sys_diag, 0);
-+ diag_change();
-+
-+ return 0;
-+}
-+
-+static void __exit diag_exit()
-+{
-+ unregister_sysctl_table(diag_sysctl_header);
-+}
-+
-+MODULE_AUTHOR("openwrt.org");
-+MODULE_LICENSE("GPL");
-+
-+module_init(diag_init);
-+module_exit(diag_exit);