[lantiq] adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24526 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 799 insertions, 0 deletions

diff --git a/target/linux/lantiq/patches/200-serial.patch b/target/linux/lantiq/patches/200-serial.patch
new file mode 100644
index 0000000000..a13022786b
--- /dev/null
+++ b/target/linux/lantiq/patches/200-serial.patch
@@ -0,0 +1,799 @@
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1397,6 +1397,14 @@
+ 	help
+ 	  Support for Console on the NWP serial ports.
+ 
++config SERIAL_LANTIQ
++	bool "Lantiq serial driver"
++	depends on LANTIQ
++	select SERIAL_CORE
++	select SERIAL_CORE_CONSOLE
++	help
++	  Driver for the Lantiq SoC ASC hardware
++
+ config SERIAL_QE
+ 	tristate "Freescale QUICC Engine serial port support"
+ 	depends on QUICC_ENGINE
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -84,3 +84,4 @@
+ obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
+ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
+ obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
++obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
+--- /dev/null
++++ b/drivers/serial/lantiq.c
+@@ -0,0 +1,772 @@
++/*
++ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ * Copyright (C) 2004 Infineon IFAP DC COM CPE
++ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2010 Thomas Langer, Lantiq Deutschland
++ */
++
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/ioport.h>
++#include <linux/init.h>
++#include <linux/console.h>
++#include <linux/sysrq.h>
++#include <linux/device.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/serial_core.h>
++#include <linux/serial.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/clk.h>
++
++#define lq_r32(reg)			__raw_readl(reg)
++#define lq_r8(reg)				__raw_readb(reg)
++#define lq_w32(val, reg)			__raw_writel(val, reg)
++#define lq_w8(val, reg)			__raw_writeb(val, reg)
++#define lq_w32_mask(clear, set, reg)	lq_w32((lq_r32(reg) & ~(clear)) | (set), reg)
++
++#define PORT_IFXMIPSASC		111
++#define MAXPORTS		2
++
++#define UART_DUMMY_UER_RX 1
++
++#define DRVNAME "lq_asc"
++
++#ifdef __BIG_ENDIAN
++#define IFXMIPS_ASC_TBUF		(0x0020 + 3)
++#define IFXMIPS_ASC_RBUF		(0x0024 + 3)
++#else
++#define IFXMIPS_ASC_TBUF		0x0020
++#define IFXMIPS_ASC_RBUF		0x0024
++#endif
++
++#define IFXMIPS_ASC_FSTAT		0x0048
++#define IFXMIPS_ASC_WHBSTATE		0x0018
++#define IFXMIPS_ASC_STATE		0x0014
++#define IFXMIPS_ASC_IRNCR		0x00F8
++#define IFXMIPS_ASC_CLC			0x0000
++#define IFXMIPS_ASC_ID			0x0008
++#define IFXMIPS_ASC_PISEL		0x0004
++#define IFXMIPS_ASC_TXFCON		0x0044
++#define IFXMIPS_ASC_RXFCON		0x0040
++#define IFXMIPS_ASC_CON			0x0010
++#define IFXMIPS_ASC_BG			0x0050
++#define IFXMIPS_ASC_IRNREN		0x00F4
++
++#define ASC_IRNREN_TX			0x1
++#define ASC_IRNREN_RX			0x2
++#define ASC_IRNREN_ERR			0x4
++#define ASC_IRNREN_TX_BUF		0x8
++#define ASC_IRNCR_TIR			0x1
++#define ASC_IRNCR_RIR			0x2
++#define ASC_IRNCR_EIR			0x4
++
++#define ASCOPT_CSIZE			0x3
++#define ASCOPT_CS7			0x1
++#define ASCOPT_CS8			0x2
++#define ASCOPT_PARENB			0x4
++#define ASCOPT_STOPB			0x8
++#define ASCOPT_PARODD			0x0
++#define ASCOPT_CREAD			0x20
++#define TXFIFO_FL			1
++#define RXFIFO_FL			1
++#define ASCCLC_DISS			0x2
++#define ASCCLC_RMCMASK			0x0000FF00
++#define ASCCLC_RMCOFFSET		8
++#define ASCCON_M_8ASYNC			0x0
++#define ASCCON_M_7ASYNC			0x2
++#define ASCCON_ODD			0x00000020
++#define ASCCON_STP			0x00000080
++#define ASCCON_BRS			0x00000100
++#define ASCCON_FDE			0x00000200
++#define ASCCON_R			0x00008000
++#define ASCCON_FEN			0x00020000
++#define ASCCON_ROEN			0x00080000
++#define ASCCON_TOEN			0x00100000
++#define ASCSTATE_PE			0x00010000
++#define ASCSTATE_FE			0x00020000
++#define ASCSTATE_ROE			0x00080000
++#define ASCSTATE_ANY			(ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
++#define ASCWHBSTATE_CLRREN		0x00000001
++#define ASCWHBSTATE_SETREN		0x00000002
++#define ASCWHBSTATE_CLRPE		0x00000004
++#define ASCWHBSTATE_CLRFE		0x00000008
++#define ASCWHBSTATE_CLRROE		0x00000020
++#define ASCTXFCON_TXFEN			0x0001
++#define ASCTXFCON_TXFFLU		0x0002
++#define ASCTXFCON_TXFITLMASK		0x3F00
++#define ASCTXFCON_TXFITLOFF		8
++#define ASCRXFCON_RXFEN			0x0001
++#define ASCRXFCON_RXFFLU		0x0002
++#define ASCRXFCON_RXFITLMASK		0x3F00
++#define ASCRXFCON_RXFITLOFF		8
++#define ASCFSTAT_RXFFLMASK		0x003F
++#define ASCFSTAT_TXFFLMASK		0x3F00
++#define ASCFSTAT_TXFFLOFF		8
++#define ASCFSTAT_RXFREEMASK		0x003F0000
++#define ASCFSTAT_RXFREEOFF		16
++#define ASCFSTAT_TXFREEMASK		0x3F000000
++#define ASCFSTAT_TXFREEOFF		24
++
++static void lqasc_tx_chars(struct uart_port *port);
++extern void prom_printf(const char *fmt, ...);
++static struct lq_uart_port *lqasc_port[2];
++static struct uart_driver lqasc_reg;
++
++struct lq_uart_port {
++	struct uart_port	port;
++	struct clk			*clk;
++	unsigned int		tx_irq;
++	unsigned int		rx_irq;
++	unsigned int		err_irq;
++};
++
++static inline struct
++lq_uart_port *to_lq_uart_port(struct uart_port *port)
++{
++	return container_of(port, struct lq_uart_port, port);
++}
++
++static void
++lqasc_stop_tx(struct uart_port *port)
++{
++	return;
++}
++
++static void
++lqasc_start_tx(struct uart_port *port)
++{
++	unsigned long flags;
++	local_irq_save(flags);
++	lqasc_tx_chars(port);
++	local_irq_restore(flags);
++	return;
++}
++
++static void
++lqasc_stop_rx(struct uart_port *port)
++{
++	lq_w32(ASCWHBSTATE_CLRREN, port->membase + IFXMIPS_ASC_WHBSTATE);
++}
++
++static void
++lqasc_enable_ms(struct uart_port *port)
++{
++}
++
++static void
++lqasc_rx_chars(struct uart_port *port)
++{
++	struct tty_struct *tty = port->state->port.tty;
++	unsigned int ch = 0, rsr = 0, fifocnt;
++
++	fifocnt = lq_r32(port->membase + IFXMIPS_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
++	while (fifocnt--) {
++		u8 flag = TTY_NORMAL;
++		ch = lq_r8(port->membase + IFXMIPS_ASC_RBUF);
++		rsr = (lq_r32(port->membase + IFXMIPS_ASC_STATE)
++			& ASCSTATE_ANY) | UART_DUMMY_UER_RX;
++		tty_flip_buffer_push(tty);
++		port->icount.rx++;
++
++		/*
++		 * Note that the error handling code is
++		 * out of the main execution path
++		 */
++		if (rsr & ASCSTATE_ANY) {
++			if (rsr & ASCSTATE_PE) {
++				port->icount.parity++;
++				lq_w32_mask(0, ASCWHBSTATE_CLRPE,
++					port->membase + IFXMIPS_ASC_WHBSTATE);
++			} else if (rsr & ASCSTATE_FE) {
++				port->icount.frame++;
++				lq_w32_mask(0, ASCWHBSTATE_CLRFE,
++					port->membase + IFXMIPS_ASC_WHBSTATE);
++			}
++			if (rsr & ASCSTATE_ROE) {
++				port->icount.overrun++;
++				lq_w32_mask(0, ASCWHBSTATE_CLRROE,
++					port->membase + IFXMIPS_ASC_WHBSTATE);
++			}
++
++			rsr &= port->read_status_mask;
++
++			if (rsr & ASCSTATE_PE)
++				flag = TTY_PARITY;
++			else if (rsr & ASCSTATE_FE)
++				flag = TTY_FRAME;
++		}
++
++		if ((rsr & port->ignore_status_mask) == 0)
++			tty_insert_flip_char(tty, ch, flag);
++
++		if (rsr & ASCSTATE_ROE)
++			/*
++			 * Overrun is special, since it's reported
++			 * immediately, and doesn't affect the current
++			 * character
++			 */
++			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
++	}
++	if (ch != 0)
++		tty_flip_buffer_push(tty);
++	return;
++}
++
++static void
++lqasc_tx_chars(struct uart_port *port)
++{
++	struct circ_buf *xmit = &port->state->xmit;
++	if (uart_tx_stopped(port)) {
++		lqasc_stop_tx(port);
++		return;
++	}
++
++	while (((lq_r32(port->membase + IFXMIPS_ASC_FSTAT) &
++		ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
++		if (port->x_char) {
++			lq_w8(port->x_char, port->membase + IFXMIPS_ASC_TBUF);
++			port->icount.tx++;
++			port->x_char = 0;
++			continue;
++		}
++
++		if (uart_circ_empty(xmit))
++			break;
++
++		lq_w8(port->state->xmit.buf[port->state->xmit.tail],
++			port->membase + IFXMIPS_ASC_TBUF);
++		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++		port->icount.tx++;
++	}
++
++	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++		uart_write_wakeup(port);
++}
++
++static irqreturn_t
++lqasc_tx_int(int irq, void *_port)
++{
++	struct uart_port *port = (struct uart_port *)_port;
++	lq_w32(ASC_IRNCR_TIR, port->membase + IFXMIPS_ASC_IRNCR);
++	lqasc_start_tx(port);
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t
++lqasc_err_int(int irq, void *_port)
++{
++	struct uart_port *port = (struct uart_port *)_port;
++	/* clear any pending interrupts */
++	lq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE | ASCWHBSTATE_CLRROE,
++		port->membase + IFXMIPS_ASC_WHBSTATE);
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t
++lqasc_rx_int(int irq, void *_port)
++{
++	struct uart_port *port = (struct uart_port *)_port;
++	lq_w32(ASC_IRNCR_RIR, port->membase + IFXMIPS_ASC_IRNCR);
++	lqasc_rx_chars(port);
++	return IRQ_HANDLED;
++}
++
++static unsigned int
++lqasc_tx_empty(struct uart_port *port)
++{
++	int status;
++	status = lq_r32(port->membase + IFXMIPS_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
++	return status ? 0 : TIOCSER_TEMT;
++}
++
++static unsigned int
++lqasc_get_mctrl(struct uart_port *port)
++{
++	return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
++}
++
++static void
++lqasc_set_mctrl(struct uart_port *port, u_int mctrl)
++{
++}
++
++static void
++lqasc_break_ctl(struct uart_port *port, int break_state)
++{
++}
++
++static int
++lqasc_startup(struct uart_port *port)
++{
++	struct lq_uart_port *ifx_port = to_lq_uart_port(port);
++	int retval;
++
++	port->uartclk = clk_get_rate(ifx_port->clk);
++
++	lq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
++		port->membase + IFXMIPS_ASC_CLC);
++
++	lq_w32(0, port->membase + IFXMIPS_ASC_PISEL);
++	lq_w32(
++		((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
++		ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
++		port->membase + IFXMIPS_ASC_TXFCON);
++	lq_w32(
++		((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
++		| ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
++		port->membase + IFXMIPS_ASC_RXFCON);
++	/* make sure other settings are written to hardware before setting enable bits */
++	wmb();
++	lq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
++		ASCCON_ROEN, port->membase + IFXMIPS_ASC_CON);
++
++	retval = request_irq(ifx_port->tx_irq, lqasc_tx_int,
++		IRQF_DISABLED, "asc_tx", port);
++	if (retval) {
++		pr_err("failed to request lqasc_tx_int\n");
++		return retval;
++	}
++
++	retval = request_irq(ifx_port->rx_irq, lqasc_rx_int,
++		IRQF_DISABLED, "asc_rx", port);
++	if (retval) {
++		pr_err("failed to request lqasc_rx_int\n");
++		goto err1;
++	}
++
++	retval = request_irq(ifx_port->err_irq, lqasc_err_int,
++		IRQF_DISABLED, "asc_err", port);
++	if (retval) {
++		pr_err("failed to request lqasc_err_int\n");
++		goto err2;
++	}
++
++	lq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
++		port->membase + IFXMIPS_ASC_IRNREN);
++	return 0;
++
++err2:
++	free_irq(ifx_port->rx_irq, port);
++err1:
++	free_irq(ifx_port->tx_irq, port);
++	return retval;
++}
++
++static void
++lqasc_shutdown(struct uart_port *port)
++{
++	struct lq_uart_port *ifx_port = to_lq_uart_port(port);
++	free_irq(ifx_port->tx_irq, port);
++	free_irq(ifx_port->rx_irq, port);
++	free_irq(ifx_port->err_irq, port);
++
++	lq_w32(0, port->membase + IFXMIPS_ASC_CON);
++	lq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
++		port->membase + IFXMIPS_ASC_RXFCON);
++	lq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
++		port->membase + IFXMIPS_ASC_TXFCON);
++}
++
++static void
++lqasc_set_termios(struct uart_port *port,
++	struct ktermios *new, struct ktermios *old)
++{
++	unsigned int cflag;
++	unsigned int iflag;
++	unsigned int quot;
++	unsigned int baud;
++	unsigned int con = 0;
++	unsigned long flags;
++
++	cflag = new->c_cflag;
++	iflag = new->c_iflag;
++
++	switch (cflag & CSIZE) {
++	case CS7:
++		con = ASCCON_M_7ASYNC;
++		break;
++
++	case CS5:
++	case CS6:
++	default:
++		con = ASCCON_M_8ASYNC;
++		break;
++	}
++
++	if (cflag & CSTOPB)
++		con |= ASCCON_STP;
++
++	if (cflag & PARENB) {
++		if (!(cflag & PARODD))
++			con &= ~ASCCON_ODD;
++		else
++			con |= ASCCON_ODD;
++	}
++
++	port->read_status_mask = ASCSTATE_ROE;
++	if (iflag & INPCK)
++		port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
++
++	port->ignore_status_mask = 0;
++	if (iflag & IGNPAR)
++		port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
++
++	if (iflag & IGNBRK) {
++		/*
++		 * If we're ignoring parity and break indicators,
++		 * ignore overruns too (for real raw support).
++		 */
++		if (iflag & IGNPAR)
++			port->ignore_status_mask |= ASCSTATE_ROE;
++	}
++
++	if ((cflag & CREAD) == 0)
++		port->ignore_status_mask |= UART_DUMMY_UER_RX;
++
++	/* set error signals  - framing, parity  and overrun, enable receiver */
++	con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
++
++	local_irq_save(flags);
++
++	/* set up CON */
++	lq_w32_mask(0, con, port->membase + IFXMIPS_ASC_CON);
++
++	/* Set baud rate - take a divider of 2 into account */
++	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
++	quot = uart_get_divisor(port, baud);
++	quot = quot / 2 - 1;
++
++	/* disable the baudrate generator */
++	lq_w32_mask(ASCCON_R, 0, port->membase + IFXMIPS_ASC_CON);
++
++	/* make sure the fractional divider is off */
++	lq_w32_mask(ASCCON_FDE, 0, port->membase + IFXMIPS_ASC_CON);
++
++	/* set up to use divisor of 2 */
++	lq_w32_mask(ASCCON_BRS, 0, port->membase + IFXMIPS_ASC_CON);
++
++	/* now we can write the new baudrate into the register */
++	lq_w32(quot, port->membase + IFXMIPS_ASC_BG);
++
++	/* turn the baudrate generator back on */
++	lq_w32_mask(0, ASCCON_R, port->membase + IFXMIPS_ASC_CON);
++
++	/* enable rx */
++	lq_w32(ASCWHBSTATE_SETREN, port->membase + IFXMIPS_ASC_WHBSTATE);
++
++	local_irq_restore(flags);
++}
++
++static const char*
++lqasc_type(struct uart_port *port)
++{
++	if (port->type == PORT_IFXMIPSASC)
++		return DRVNAME;
++	else
++		return NULL;
++}
++
++static void
++lqasc_release_port(struct uart_port *port)
++{
++	if (port->flags & UPF_IOREMAP) {
++		iounmap(port->membase);
++		port->membase = NULL;
++	}
++}
++
++static int
++lqasc_request_port(struct uart_port *port)
++{
++	struct platform_device *pdev = to_platform_device(port->dev);
++	struct resource *mmres;
++	int size;
++
++	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!mmres)
++		return -ENODEV;
++	size = resource_size(mmres);
++
++	if (port->flags & UPF_IOREMAP) {
++		port->membase = ioremap_nocache(port->mapbase, size);
++		if (port->membase == NULL)
++			return -ENOMEM;
++	}
++	return 0;
++}
++
++static void
++lqasc_config_port(struct uart_port *port, int flags)
++{
++	if (flags & UART_CONFIG_TYPE) {
++		port->type = PORT_IFXMIPSASC;
++		lqasc_request_port(port);
++	}
++}
++
++static int
++lqasc_verify_port(struct uart_port *port,
++	struct serial_struct *ser)
++{
++	int ret = 0;
++	if (ser->type != PORT_UNKNOWN && ser->type != PORT_IFXMIPSASC)
++		ret = -EINVAL;
++	if (ser->irq < 0 || ser->irq >= NR_IRQS)
++		ret = -EINVAL;
++	if (ser->baud_base < 9600)
++		ret = -EINVAL;
++	return ret;
++}
++
++static struct uart_ops lqasc_pops = {
++	.tx_empty =	lqasc_tx_empty,
++	.set_mctrl =	lqasc_set_mctrl,
++	.get_mctrl =	lqasc_get_mctrl,
++	.stop_tx =	lqasc_stop_tx,
++	.start_tx =	lqasc_start_tx,
++	.stop_rx =	lqasc_stop_rx,
++	.enable_ms =	lqasc_enable_ms,
++	.break_ctl =	lqasc_break_ctl,
++	.startup =	lqasc_startup,
++	.shutdown =	lqasc_shutdown,
++	.set_termios =	lqasc_set_termios,
++	.type =		lqasc_type,
++	.release_port =	lqasc_release_port,
++	.request_port =	lqasc_request_port,
++	.config_port =	lqasc_config_port,
++	.verify_port =	lqasc_verify_port,
++};
++
++static void
++lqasc_console_putchar(struct uart_port *port, int ch)
++{
++	int fifofree;
++
++	if (!port->membase)
++		return;
++
++	do {
++		fifofree = (lq_r32(port->membase + IFXMIPS_ASC_FSTAT)
++			& ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
++	} while (fifofree == 0);
++	lq_w8(ch, port->membase + IFXMIPS_ASC_TBUF);
++}
++
++
++static void
++lqasc_console_write(struct console *co, const char *s, u_int count)
++{
++	struct lq_uart_port *ifx_port;
++	struct uart_port *port;
++	unsigned long flags;
++
++	if (co->index >= MAXPORTS)
++		return;
++
++	ifx_port = lqasc_port[co->index];
++	if (!ifx_port)
++		return;
++
++	port = &ifx_port->port;
++
++	local_irq_save(flags);
++	uart_console_write(port, s, count, lqasc_console_putchar);
++	local_irq_restore(flags);
++}
++
++static int __init
++lqasc_console_setup(struct console *co, char *options)
++{
++	struct lq_uart_port *ifx_port;
++	struct uart_port *port;
++	int baud = 115200;
++	int bits = 8;
++	int parity = 'n';
++	int flow = 'n';
++
++	if (co->index >= MAXPORTS)
++		return -ENODEV;
++
++	ifx_port = lqasc_port[co->index];
++	if (!ifx_port)
++		return -ENODEV;
++
++	port = &ifx_port->port;
++
++	port->uartclk = clk_get_rate(ifx_port->clk);
++
++	if (options)
++		uart_parse_options(options, &baud, &parity, &bits, &flow);
++	return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++static struct console lqasc_console = {
++	.name =		"ttyS",
++	.write =	lqasc_console_write,
++	.device =	uart_console_device,
++	.setup =	lqasc_console_setup,
++	.flags =	CON_PRINTBUFFER,
++	.index =	-1,
++	.data =		&lqasc_reg,
++};
++
++static int __init
++lqasc_console_init(void)
++{
++	register_console(&lqasc_console);
++	return 0;
++}
++console_initcall(lqasc_console_init);
++
++static struct uart_driver lqasc_reg = {
++	.owner =	THIS_MODULE,
++	.driver_name =	DRVNAME,
++	.dev_name =	"ttyS",
++	.major =	TTY_MAJOR,
++	.minor =	64,
++	.nr =		MAXPORTS,
++	.cons =		&lqasc_console,
++};
++
++static int __devinit
++lqasc_probe(struct platform_device *pdev)
++{
++	struct lq_uart_port *ifx_port;
++	struct uart_port *port;
++	struct resource *mmres, *irqres;
++	int tx_irq, rx_irq, err_irq;
++	struct clk *clk;
++	int ret;
++
++	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!mmres || !irqres)
++		return -ENODEV;
++
++	if (pdev->id >= MAXPORTS)
++		return -EBUSY;
++
++	if (lqasc_port[pdev->id] != NULL)
++		return -EBUSY;
++
++	clk = clk_get(&pdev->dev, "fpi");
++	if (IS_ERR(clk)) {
++		pr_err("failed to get fpi clk\n");
++		return -ENOENT;
++	}
++
++	tx_irq = platform_get_irq_byname(pdev, "tx");
++	if (tx_irq < 0) {
++		/* without named resources: assume standard irq scheme */
++		tx_irq = irqres->start;
++		rx_irq = irqres->start+2;
++		err_irq = irqres->start+3;
++	} else {
++		/* other irqs must be named also! */
++		rx_irq = platform_get_irq_byname(pdev, "rx");
++		err_irq = platform_get_irq_byname(pdev, "err");
++		if ((rx_irq < 0) | (err_irq < 0))
++			return -ENODEV;
++	}
++
++	ifx_port = kzalloc(sizeof(struct lq_uart_port), GFP_KERNEL);
++	if (!ifx_port)
++		return -ENOMEM;
++
++	port = &ifx_port->port;
++
++	port->iotype	= SERIAL_IO_MEM;
++	port->flags	= ASYNC_BOOT_AUTOCONF | UPF_IOREMAP;
++	port->ops	= &lqasc_pops;
++	port->fifosize	= 16;
++	port->type	= PORT_IFXMIPSASC,
++	port->line	= pdev->id;
++	port->dev	= &pdev->dev;
++
++	port->irq	= tx_irq; /* unused, just to be backward-compatibe */
++	port->mapbase	= mmres->start;
++
++	ifx_port->clk	= clk;
++
++	ifx_port->tx_irq = tx_irq;
++	ifx_port->rx_irq = rx_irq;
++	ifx_port->err_irq = err_irq;
++
++	lqasc_port[pdev->id] = ifx_port;
++	platform_set_drvdata(pdev, ifx_port);
++
++	ret = uart_add_one_port(&lqasc_reg, port);
++
++	return ret;
++}
++
++static int __devexit
++lqasc_remove(struct platform_device *pdev)
++{
++	struct lq_uart_port *ifx_port = platform_get_drvdata(pdev);
++	int ret;
++
++	clk_put(ifx_port->clk);
++	platform_set_drvdata(pdev, NULL);
++	lqasc_port[pdev->id] = NULL;
++	ret = uart_remove_one_port(&lqasc_reg, &ifx_port->port);
++	kfree(ifx_port);
++
++	return 0;
++}
++
++static struct platform_driver lqasc_driver = {
++	.probe		= lqasc_probe,
++	.remove		= __devexit_p(lqasc_remove),
++
++	.driver		= {
++		.name	= DRVNAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int __init
++init_lqasc(void)
++{
++	int ret;
++
++	ret = uart_register_driver(&lqasc_reg);
++	if (ret != 0)
++		return ret;
++
++	ret = platform_driver_register(&lqasc_driver);
++	if (ret != 0)
++		uart_unregister_driver(&lqasc_reg);
++
++	return ret;
++}
++
++void __exit
++exit_lqasc(void)
++{
++	platform_driver_unregister(&lqasc_driver);
++	uart_unregister_driver(&lqasc_reg);
++}
++
++module_init(init_lqasc);
++module_exit(exit_lqasc);
++
++MODULE_DESCRIPTION("Lantiq serial port driver");
++MODULE_LICENSE("GPL");