[ifxmips] cleanup sources and prepare for 2.6.27

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13660 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 152 insertions, 0 deletions

diff --git a/target/linux/ifxmips/patches-2.6.27/110-drivers.patch b/target/linux/ifxmips/patches-2.6.27/110-drivers.patch
new file mode 100644
index 0000000000..9382c8b399
--- /dev/null
+++ b/target/linux/ifxmips/patches-2.6.27/110-drivers.patch
@@ -0,0 +1,152 @@
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -112,6 +112,10 @@ obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
+ obj-$(CONFIG_JS_RTC)		+= js-rtc.o
+ js-rtc-y = rtc.o
+ 
++obj-$(CONFIG_IFXMIPS_SSC)  += ifxmips_ssc.o
++obj-$(CONFIG_IFXMIPS_EEPROM)   += ifxmips_eeprom.o
++obj-$(CONFIG_IFXMIPS_MEI)  += ifxmips_mei_core.o
++
+ # Files generated that shall be removed upon make clean
+ clean-files := consolemap_deftbl.c defkeymap.c
+ 
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -56,6 +56,7 @@ obj-$(CONFIG_MTD_WALNUT)        += walnu
+ obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
+ obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
+ obj-$(CONFIG_MTD_NOR_TOTO)	+= omap-toto-flash.o
++obj-$(CONFIG_MTD_IFXMIPS)	+= ifxmips.o
+ obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
+ obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
+ obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -343,6 +343,12 @@ config MACB
+ 
+ source "drivers/net/arm/Kconfig"
+ 
++config IFXMIPS_MII0
++	tristate "Infineon IFXMips eth0 driver"
++	depends on IFXMIPS
++	help
++	  Support for the MII0 inside the IFXMips SOC
++
+ config AX88796
+ 	tristate "ASIX AX88796 NE2000 clone support"
+ 	depends on ARM || MIPS || SUPERH
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1353,6 +1353,14 @@ config SERIAL_OF_PLATFORM
+ 	  Currently, only 8250 compatible ports are supported, but
+ 	  others can easily be added.
+ 
++config SERIAL_IFXMIPS
++	bool "IFXMips serial driver"
++	depends on IFXMIPS
++	select SERIAL_CORE
++	select SERIAL_CORE_CONSOLE
++	help
++	  Driver for the ifxmipss built in ASC hardware
++
+ config SERIAL_QE
+ 	tristate "Freescale QUICC Engine serial port support"
+ 	depends on QUICC_ENGINE
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -69,3 +69,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
+ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
+ obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
++obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -102,6 +102,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
+ 
+ # PARISC Architecture
+ 
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
+ obj-$(CONFIG_NIU) += niu.o
+ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
+ obj-$(CONFIG_SFC) += sfc/
+-
++obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
+ 	  If you say N, all options in this submenu will be skipped and disabled.
+ 
+ if CRYPTO_HW
++config CRYPTO_DEV_IFXMIPS
++	tristate "Support for IFXMIPS Data Encryption Unit"
++	depends on IFXMIPS
+ 
+ config CRYPTO_DEV_PADLOCK
+ 	tristate "Support for VIA PadLock ACE"
+--- a/drivers/crypto/Makefile
++++ b/drivers/crypto/Makefile
+@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
+ obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
+ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
+ obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
++obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597
+ 	help
+ 	   This driver enables support for the on-chip R8A66597 in the
+ 	   SH7366 and SH7723 processors.
++
++config USB_DWC_HCD
++	tristate "IFXMIPS USB Host Controller Driver"
++	depends on USB && IFXMIPS
++	default y
++	help
++       Danube USB Host Controller
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -169,6 +169,12 @@ config LEDS_PCA955X
+ 	  LED driver chips accessed via the I2C bus.  Supported
+ 	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.
+ 
++config LEDS_IFXMIPS
++	tristate "LED Support for IFXMIPS  LEDs"
++	depends on LEDS_CLASS && IFXMIPS
++	help
++	  This option enables support for the CM-X270 LEDs.
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-c
+ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
+ obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
+ obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
++obj-$(CONFIG_LEDS_IFXMIPS)		+= leds-ifxmips.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -704,6 +704,12 @@ config TXX9_WDT
+ 	help
+ 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+ 
++config IFXMIPS_WDT
++	bool "IFXMips watchdog"
++	depends on IFXMIPS
++	help
++	  Hardware driver for the IFXMIPS Watchdog Timer.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture