bump ifxmips to .30

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17817 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 152 deletions

diff --git a/target/linux/ifxmips/patches-2.6.27/110-drivers.patch b/target/linux/ifxmips/patches-2.6.27/110-drivers.patch
deleted file mode 100644
index 9382c8b399..0000000000
--- a/target/linux/ifxmips/patches-2.6.27/110-drivers.patch
+++ /dev/null
@@ -1,152 +0,0 @@
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -112,6 +112,10 @@ obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
- obj-$(CONFIG_JS_RTC)		+= js-rtc.o
- js-rtc-y = rtc.o
- 
-+obj-$(CONFIG_IFXMIPS_SSC)  += ifxmips_ssc.o
-+obj-$(CONFIG_IFXMIPS_EEPROM)   += ifxmips_eeprom.o
-+obj-$(CONFIG_IFXMIPS_MEI)  += ifxmips_mei_core.o
-+
- # Files generated that shall be removed upon make clean
- clean-files := consolemap_deftbl.c defkeymap.c
- 
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_MTD_WALNUT)        += walnu
- obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
- obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
- obj-$(CONFIG_MTD_NOR_TOTO)	+= omap-toto-flash.o
-+obj-$(CONFIG_MTD_IFXMIPS)	+= ifxmips.o
- obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
- obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
- obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -343,6 +343,12 @@ config MACB
- 
- source "drivers/net/arm/Kconfig"
- 
-+config IFXMIPS_MII0
-+	tristate "Infineon IFXMips eth0 driver"
-+	depends on IFXMIPS
-+	help
-+	  Support for the MII0 inside the IFXMips SOC
-+
- config AX88796
- 	tristate "ASIX AX88796 NE2000 clone support"
- 	depends on ARM || MIPS || SUPERH
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1353,6 +1353,14 @@ config SERIAL_OF_PLATFORM
- 	  Currently, only 8250 compatible ports are supported, but
- 	  others can easily be added.
- 
-+config SERIAL_IFXMIPS
-+	bool "IFXMips serial driver"
-+	depends on IFXMIPS
-+	select SERIAL_CORE
-+	select SERIAL_CORE_CONSOLE
-+	help
-+	  Driver for the ifxmipss built in ASC hardware
-+
- config SERIAL_QE
- 	tristate "Freescale QUICC Engine serial port support"
- 	depends on QUICC_ENGINE
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -69,3 +69,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -102,6 +102,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
- 
- # PARISC Architecture
- 
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
- obj-$(CONFIG_NIU) += niu.o
- obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
--
-+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
- 	  If you say N, all options in this submenu will be skipped and disabled.
- 
- if CRYPTO_HW
-+config CRYPTO_DEV_IFXMIPS
-+	tristate "Support for IFXMIPS Data Encryption Unit"
-+	depends on IFXMIPS
- 
- config CRYPTO_DEV_PADLOCK
- 	tristate "Support for VIA PadLock ACE"
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
- obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
- obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
-+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597
- 	help
- 	   This driver enables support for the on-chip R8A66597 in the
- 	   SH7366 and SH7723 processors.
-+
-+config USB_DWC_HCD
-+	tristate "IFXMIPS USB Host Controller Driver"
-+	depends on USB && IFXMIPS
-+	default y
-+	help
-+       Danube USB Host Controller
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -169,6 +169,12 @@ config LEDS_PCA955X
- 	  LED driver chips accessed via the I2C bus.  Supported
- 	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.
- 
-+config LEDS_IFXMIPS
-+	tristate "LED Support for IFXMIPS  LEDs"
-+	depends on LEDS_CLASS && IFXMIPS
-+	help
-+	  This option enables support for the CM-X270 LEDs.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-c
- obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
- obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
- obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
-+obj-$(CONFIG_LEDS_IFXMIPS)		+= leds-ifxmips.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -704,6 +704,12 @@ config TXX9_WDT
- 	help
- 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
- 
-+config IFXMIPS_WDT
-+	bool "IFXMips watchdog"
-+	depends on IFXMIPS
-+	help
-+	  Hardware driver for the IFXMIPS Watchdog Timer.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture