[etrax] dump 2.6.25 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17816 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 88 deletions

diff --git a/target/linux/etrax/patches-2.6.25/201-flashsize.patch b/target/linux/etrax/patches-2.6.25/201-flashsize.patch
deleted file mode 100644
index 4c4fa81d04..0000000000
--- a/target/linux/etrax/patches-2.6.25/201-flashsize.patch
+++ /dev/null
@@ -1,88 +0,0 @@
---- a/arch/cris/arch-v10/lib/hw_settings.S
-+++ b/arch/cris/arch-v10/lib/hw_settings.S
-@@ -60,3 +60,5 @@
- 	.dword R_PORT_PB_SET
- 	.dword PB_SET_VALUE
- 	.dword 0 ; No more register values
-+	.ascii "ACME_PART_MAGIC" 
-+	.dword 0xdeadc0de
---- a/arch/cris/arch-v10/drivers/axisflashmap.c
-+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
-@@ -113,7 +113,7 @@ static struct map_info map_cse1 = {
- 
- /* If no partition-table was found, we use this default-set. */
- #define MAX_PARTITIONS         7
--#define NUM_DEFAULT_PARTITIONS 3
-+#define NUM_DEFAULT_PARTITIONS 2
- 
- /*
-  * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
-@@ -122,19 +122,14 @@ static struct map_info map_cse1 = {
-  */
- static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
- 	{
--		.name = "boot firmware",
--		.size = CONFIG_ETRAX_PTABLE_SECTOR,
--		.offset = 0
--	},
--	{
- 		.name = "kernel",
--		.size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
--		.offset = CONFIG_ETRAX_PTABLE_SECTOR
-+		.size = 0x00,
-+		.offset = 0
- 	},
- 	{
--		.name = "filesystem",
--		.size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
--		.offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
-+		.name = "rootfs",
-+		.size = 0x200000 ,
-+		.offset = 0x200000
- 	}
- };
- 
-@@ -281,6 +276,11 @@ static int __init init_axis_flash(void)
- 	struct partitiontable_entry *ptable;
- 	int use_default_ptable = 1; /* Until proven otherwise. */
- 	const char pmsg[] = "  /dev/flash%d at 0x%08x, size 0x%08x\n";
-+	unsigned int kernel_part_size = 0;
-+	unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR);
-+	unsigned int flash_scan_count = 0;
-+	const char *part_magic = "ACME_PART_MAGIC";
-+	unsigned int magic_len = strlen(part_magic);
- 
- 	if (!(mymtd = flash_probe())) {
- 		/* There's no reason to use this module if no flash chip can
-@@ -292,6 +292,31 @@ static int __init init_axis_flash(void)
- 		       mymtd->name, mymtd->size);
- 		axisflash_mtd = mymtd;
- 	}
-+	/* scan flash to findout where out partition starts */
-+
-+	printk(KERN_INFO "Scanning flash for end of kernel magic\n");
-+	for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++){
-+		if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0)
-+		{
-+			kernel_part_size = flash_mem[flash_scan_count + magic_len ];
-+			kernel_part_size <<= 8;
-+			kernel_part_size += flash_mem[flash_scan_count + magic_len + 2];
-+			kernel_part_size <<= 8;
-+			kernel_part_size += flash_mem[flash_scan_count + magic_len + 1];
-+			kernel_part_size <<= 8;
-+			kernel_part_size += flash_mem[flash_scan_count + magic_len + 3];
-+			printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size);
-+			flash_scan_count = 1100000;
-+		}
-+	}
-+
-+
-+	if(kernel_part_size){
-+		kernel_part_size = (kernel_part_size & 0xffff0000);
-+		axis_default_partitions[0].size = kernel_part_size;
-+		axis_default_partitions[1].size =  mymtd->size - axis_default_partitions[0].size;
-+		axis_default_partitions[1].offset = axis_default_partitions[0].size;
-+	}
- 
- 	if (mymtd) {
- 		mymtd->owner = THIS_MODULE;