summaryrefslogtreecommitdiff
path: root/target/linux/cns3xxx/patches-3.0/052-cns3xxx_spi.patch
diff options
context:
space:
mode:
authorkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2011-07-01 08:15:48 +0000
committerkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2011-07-01 08:15:48 +0000
commit5bdb3e2cb76a8b68f51dd09c7e0c56d517945dac (patch)
treefd238af69db7c682b7c5741b976e83fbb8acdded /target/linux/cns3xxx/patches-3.0/052-cns3xxx_spi.patch
parent7437ee4707cd7e0a8bdcf19e94c5d29ea8b223cd (diff)
[cns3xxx]: preliminary 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27328 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/cns3xxx/patches-3.0/052-cns3xxx_spi.patch')
-rw-r--r--target/linux/cns3xxx/patches-3.0/052-cns3xxx_spi.patch509
1 files changed, 509 insertions, 0 deletions
diff --git a/target/linux/cns3xxx/patches-3.0/052-cns3xxx_spi.patch b/target/linux/cns3xxx/patches-3.0/052-cns3xxx_spi.patch
new file mode 100644
index 0000000000..d8187326bd
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.0/052-cns3xxx_spi.patch
@@ -0,0 +1,509 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -123,6 +123,13 @@ config SPI_BUTTERFLY
+ inexpensive battery powered microcontroller evaluation board.
+ This same cable can be used to flash new firmware.
+
++config SPI_CNS3XXX
++ tristate "CNS3XXX SPI controller"
++ depends on ARCH_CNS3XXX && SPI_MASTER
++ select SPI_BITBANG
++ help
++ This enables using the CNS3XXX SPI controller in master mode.
++
+ config SPI_COLDFIRE_QSPI
+ tristate "Freescale Coldfire QSPI controller"
+ depends on (M520x || M523x || M5249 || M527x || M528x || M532x)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -56,6 +56,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.
+ obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
+ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
+ obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o
++obj-$(CONFIG_SPI_CNS3XXX) += spi_cns3xxx.o
+
+ # special build for s3c24xx spi driver with fiq support
+ spi_s3c24xx_hw-y := spi_s3c24xx.o
+--- /dev/null
++++ b/drivers/spi/spi_cns3xxx.c
+@@ -0,0 +1,449 @@
++/*******************************************************************************
++ *
++ * CNS3XXX SPI controller driver (master mode only)
++ *
++ * Copyright (c) 2008 Cavium Networks
++ * Copyright 2011 Gateworks Corporation
++ * Chris Lang <clang@gateworks.com>
++ *
++ * This file is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License, Version 2, as
++ * published by the Free Software Foundation.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
++ * NONINFRINGEMENT. See the GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this file; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
++ * visit http://www.gnu.org/licenses/.
++ *
++ * This file may also be available under a different license from Cavium.
++ * Contact Cavium Networks for more information
++ *
++ ******************************************************************************/
++
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/errno.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/mtd/partitions.h>
++#include <linux/dma-mapping.h>
++#include <linux/slab.h>
++
++#include <asm/io.h>
++#include <asm/memory.h>
++#include <asm/dma.h>
++#include <asm/delay.h>
++#include <mach/cns3xxx.h>
++#include <linux/module.h>
++#include <mach/pm.h>
++
++/*
++ * define access macros
++ */
++#define SPI_MEM_MAP_VALUE(reg_offset) (*((u32 volatile *)(CNS3XXX_SSP_BASE_VIRT + reg_offset)))
++
++#define SPI_CONFIGURATION_REG SPI_MEM_MAP_VALUE(0x40)
++#define SPI_SERVICE_STATUS_REG SPI_MEM_MAP_VALUE(0x44)
++#define SPI_BIT_RATE_CONTROL_REG SPI_MEM_MAP_VALUE(0x48)
++#define SPI_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x4C)
++#define SPI_TRANSMIT_BUFFER_REG SPI_MEM_MAP_VALUE(0x50)
++#define SPI_RECEIVE_CONTROL_REG SPI_MEM_MAP_VALUE(0x54)
++#define SPI_RECEIVE_BUFFER_REG SPI_MEM_MAP_VALUE(0x58)
++#define SPI_FIFO_TRANSMIT_CONFIG_REG SPI_MEM_MAP_VALUE(0x5C)
++#define SPI_FIFO_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x60)
++#define SPI_FIFO_RECEIVE_CONFIG_REG SPI_MEM_MAP_VALUE(0x64)
++#define SPI_INTERRUPT_STATUS_REG SPI_MEM_MAP_VALUE(0x68)
++#define SPI_INTERRUPT_ENABLE_REG SPI_MEM_MAP_VALUE(0x6C)
++
++#define SPI_TRANSMIT_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x50)
++#define SPI_RECEIVE_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x58)
++
++/* Structure for SPI controller of CNS3XXX SOCs */
++struct cns3xxx_spi {
++ /* bitbang has to be first */
++ struct spi_bitbang bitbang;
++ struct completion done;
++ wait_queue_head_t wait;
++
++ int len;
++ int count;
++ int last_in_message_list;
++
++ /* data buffers */
++ const unsigned char *tx;
++ unsigned char *rx;
++
++ struct spi_master *master;
++ struct platform_device *pdev;
++ struct device *dev;
++};
++
++static inline u8 cns3xxx_spi_bus_idle(void)
++{
++ return ((SPI_SERVICE_STATUS_REG & 0x1) ? 0 : 1);
++}
++
++static inline u8 cns3xxx_spi_tx_buffer_empty(void)
++{
++ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 3)) ? 1 : 0);
++}
++
++static inline u8 cns3xxx_spi_rx_buffer_full(void)
++{
++ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 2)) ? 1 : 0);
++}
++
++u8 cns3xxx_spi_tx_rx(u8 tx_channel, u8 tx_eof, u32 tx_data,
++ u32 * rx_data)
++{
++ u8 rx_channel;
++ u8 rx_eof;
++
++ while (!cns3xxx_spi_bus_idle()) ; // do nothing
++
++ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing
++
++ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
++ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2);
++
++ SPI_TRANSMIT_BUFFER_REG = tx_data;
++
++ while (!cns3xxx_spi_rx_buffer_full()) ; // do nothing
++
++ rx_channel = SPI_RECEIVE_CONTROL_REG & 0x3;
++ rx_eof = (SPI_RECEIVE_CONTROL_REG & (0x1 << 2)) ? 1 : 0;
++
++ *rx_data = SPI_RECEIVE_BUFFER_REG;
++
++ if ((tx_channel != rx_channel) || (tx_eof != rx_eof)) {
++ return 0;
++ } else {
++ return 1;
++ }
++}
++
++u8 cns3xxx_spi_tx(u8 tx_channel, u8 tx_eof, u32 tx_data)
++{
++
++ while (!cns3xxx_spi_bus_idle()) ; // do nothing
++
++ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing
++
++ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
++ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2);
++
++ SPI_TRANSMIT_BUFFER_REG = tx_data;
++
++ return 1;
++}
++
++static inline struct cns3xxx_spi *to_hw(struct spi_device *sdev)
++{
++ return spi_master_get_devdata(sdev->master);
++}
++
++static int cns3xxx_spi_setup_transfer(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ return 0;
++}
++
++static void cns3xxx_spi_chipselect(struct spi_device *spi, int value)
++{
++ unsigned int spi_config;
++
++ switch (value) {
++ case BITBANG_CS_INACTIVE:
++ break;
++
++ case BITBANG_CS_ACTIVE:
++ spi_config = SPI_CONFIGURATION_REG;
++
++ if (spi->mode & SPI_CPHA)
++ spi_config |= (0x1 << 13);
++ else
++ spi_config &= ~(0x1 << 13);
++
++ if (spi->mode & SPI_CPOL)
++ spi_config |= (0x1 << 14);
++ else
++ spi_config &= ~(0x1 << 14);
++
++ /* write new configration */
++ SPI_CONFIGURATION_REG = spi_config;
++
++ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
++ SPI_TRANSMIT_CONTROL_REG |= (spi->chip_select & 0x3);
++
++ break;
++ }
++}
++
++static int cns3xxx_spi_setup(struct spi_device *spi)
++{
++ if (!spi->bits_per_word)
++ spi->bits_per_word = 8;
++
++ return 0;
++}
++
++static int cns3xxx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
++{
++ struct cns3xxx_spi *hw = to_hw(spi);
++
++ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf,
++ t->len);
++
++ hw->tx = t->tx_buf;
++ hw->rx = t->rx_buf;
++ hw->len = t->len;
++ hw->count = 0;
++ hw->last_in_message_list = t->last_in_message_list;
++
++ init_completion(&hw->done);
++
++ if (hw->tx) {
++ int i;
++ u32 rx_data;
++ for (i = 0; i < (hw->len - 1); i++) {
++ dev_dbg(&spi->dev,
++ "[SPI_CNS3XXX_DEBUG] hw->tx[%02d]: 0x%02x\n", i,
++ hw->tx[i]);
++ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i],
++ &rx_data);
++ if (hw->rx) {
++ hw->rx[i] = rx_data;
++ dev_dbg(&spi->dev,
++ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
++ i, hw->rx[i]);
++ }
++ }
++
++ if (t->last_in_message_list) {
++ cns3xxx_spi_tx_rx(spi->chip_select, 1, hw->tx[i],
++ &rx_data);
++ if (hw->rx) {
++ hw->rx[i] = rx_data;
++ dev_dbg(&spi->dev,
++ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
++ i, hw->rx[i]);
++ }
++ } else {
++ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i],
++ &rx_data);
++ }
++ goto done;
++ }
++
++ if (hw->rx) {
++ int i;
++ u32 rx_data;
++ for (i = 0; i < (hw->len - 1); i++) {
++ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data);
++ hw->rx[i] = rx_data;
++ dev_dbg(&spi->dev,
++ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", i,
++ hw->rx[i]);
++ }
++
++ if (t->last_in_message_list) {
++ cns3xxx_spi_tx_rx(spi->chip_select, 1, 0xff, &rx_data);
++ } else {
++ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data);
++ }
++ hw->rx[i] = rx_data;
++ dev_dbg(&spi->dev, "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
++ i, hw->rx[i]);
++ }
++done:
++ return hw->len;
++}
++
++static void __init cns3xxx_spi_initial(void)
++{
++ u32 __iomem *gpiob = __io(CNS3XXX_MISC_BASE_VIRT + 0x0018);
++ u32 gpiob_pins = __raw_readl(gpiob);
++
++ /* MMC/SD pins share with GPIOA */
++ gpiob_pins |= 0xf80;
++ __raw_writel(gpiob_pins, gpiob);
++
++ /* share pin config. */
++ //PM_PLL_HM_PD_CTRL_REG &= ~(0x1 << 5);
++ //HAL_MISC_ENABLE_SPI_PINS();
++ cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SPI_PCM_I2C));
++ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SPI_PCM_I2C));
++
++ SPI_CONFIGURATION_REG = (((0x0 & 0x3) << 0) | /* 8bits shift length */
++ (0x0 << 9) | /* SPI mode */
++ (0x0 << 10) | /* disable FIFO */
++ (0x1 << 11) | /* SPI master mode */
++ (0x0 << 12) | /* disable SPI loopback mode */
++ (0x1 << 13) | /* clock phase */
++ (0x1 << 14) | /* clock polarity */
++ (0x0 << 24) | /* disable - SPI data swap */
++ (0x1 << 29) | /* enable - 2IO Read mode */
++ (0x0 << 30) | /* disable - SPI high speed read for system boot up */
++ (0x0 << 31)); /* disable - SPI */
++
++ /* Set SPI bit rate PCLK/2 */
++ SPI_BIT_RATE_CONTROL_REG = 0x1;
++
++ /* Set SPI Tx channel 0 */
++ SPI_TRANSMIT_CONTROL_REG = 0x0;
++
++ /* Set Tx FIFO Threshold, Tx FIFO has 2 words */
++ SPI_FIFO_TRANSMIT_CONFIG_REG &= ~(0x03 << 4);
++ SPI_FIFO_TRANSMIT_CONFIG_REG |= ((0x0 & 0x03) << 4);
++
++ /* Set Rx FIFO Threshold, Rx FIFO has 2 words */
++ SPI_FIFO_RECEIVE_CONFIG_REG &= ~(0x03 << 4);
++ SPI_FIFO_RECEIVE_CONFIG_REG |= ((0x0 & 0x03) << 4);
++
++ /* Disable all interrupt */
++ SPI_INTERRUPT_ENABLE_REG = 0x0;
++
++ /* Clear spurious interrupt sources */
++ SPI_INTERRUPT_STATUS_REG = (0x0F << 4);
++
++ /* Enable SPI */
++ SPI_CONFIGURATION_REG |= (0x1 << 31);
++
++ return;
++}
++
++static int __init cns3xxx_spi_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct cns3xxx_spi *hw;
++ int err = 0;
++
++ printk("%s: setup CNS3XXX SPI Controller\n", __FUNCTION__);
++
++ /* Allocate master with space for cns3xxx_spi */
++ master = spi_alloc_master(&pdev->dev, sizeof(struct cns3xxx_spi));
++ if (master == NULL) {
++ dev_err(&pdev->dev, "No memory for spi_master\n");
++ err = -ENOMEM;
++ goto err_nomem;
++ }
++
++ hw = spi_master_get_devdata(master);
++ memset(hw, 0, sizeof(struct cns3xxx_spi));
++
++ hw->master = spi_master_get(master);
++ hw->dev = &pdev->dev;
++
++ platform_set_drvdata(pdev, hw);
++ init_completion(&hw->done);
++
++ /* setup the master state. */
++
++ master->num_chipselect = 4;
++ master->bus_num = 1;
++
++ /* setup the state for the bitbang driver */
++
++ hw->bitbang.master = hw->master;
++ hw->bitbang.setup_transfer = cns3xxx_spi_setup_transfer;
++ hw->bitbang.chipselect = cns3xxx_spi_chipselect;
++ hw->bitbang.txrx_bufs = cns3xxx_spi_txrx;
++ hw->bitbang.master->setup = cns3xxx_spi_setup;
++
++ dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
++
++ /* SPI controller initializations */
++ cns3xxx_spi_initial();
++
++ /* register SPI controller */
++
++ err = spi_bitbang_start(&hw->bitbang);
++ if (err) {
++ dev_err(&pdev->dev, "Failed to register SPI master\n");
++ goto err_register;
++ }
++
++ return 0;
++
++err_register:
++ spi_master_put(hw->master);;
++
++err_nomem:
++ return err;
++}
++
++static int __devexit cns3xxx_spi_remove(struct platform_device *dev)
++{
++ struct cns3xxx_spi *hw = platform_get_drvdata(dev);
++
++ platform_set_drvdata(dev, NULL);
++
++ spi_unregister_master(hw->master);
++
++ spi_master_put(hw->master);
++ return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int cns3xxx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
++{
++ struct cns3xxx_spi *hw = platform_get_drvdata(pdev);
++
++ return 0;
++}
++
++static int cns3xxx_spi_resume(struct platform_device *pdev)
++{
++ struct cns3xxx_spi *hw = platform_get_drvdata(pdev);
++
++ return 0;
++}
++
++#else
++#define cns3xxx_spi_suspend NULL
++#define cns3xxx_spi_resume NULL
++#endif
++
++static struct platform_driver cns3xxx_spi_driver = {
++ .probe = cns3xxx_spi_probe,
++ .remove = __devexit_p(cns3xxx_spi_remove),
++ .suspend = cns3xxx_spi_suspend,
++ .resume = cns3xxx_spi_resume,
++ .driver = {
++ .name = "cns3xxx_spi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init cns3xxx_spi_init(void)
++{
++ return platform_driver_register(&cns3xxx_spi_driver);
++}
++
++static void __exit cns3xxx_spi_exit(void)
++{
++ platform_driver_unregister(&cns3xxx_spi_driver);
++}
++
++module_init(cns3xxx_spi_init);
++module_exit(cns3xxx_spi_exit);
++
++MODULE_AUTHOR("Cavium Networks");
++MODULE_DESCRIPTION("CNS3XXX SPI Controller Driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:cns3xxx_spi");
++
++EXPORT_SYMBOL_GPL(cns3xxx_spi_tx_rx);
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -446,6 +446,13 @@ struct spi_transfer {
+ u32 speed_hz;
+
+ struct list_head transfer_list;
++
++#ifdef CONFIG_ARCH_CNS3XXX
++ unsigned last_in_message_list;
++#ifdef CONFIG_SPI_CNS3XXX_2IOREAD
++ u8 dio_read;
++#endif
++#endif
+ };
+
+ /**
+--- a/drivers/spi/spi_bitbang.c
++++ b/drivers/spi/spi_bitbang.c
+@@ -329,6 +329,12 @@ static void bitbang_work(struct work_str
+ */
+ if (!m->is_dma_mapped)
+ t->rx_dma = t->tx_dma = 0;
++
++ if (t->transfer_list.next == &m->transfers)
++ t->last_in_message_list = 1;
++ else
++ t->last_in_message_list = 0;
++
+ status = bitbang->txrx_bufs(spi, t);
+ }
+ if (status > 0)