[brcm63xx] remove support for 3.6 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35506 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 71 deletions

diff --git a/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch
deleted file mode 100644
index e0eedad1e7..0000000000
--- a/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -796,6 +796,60 @@
- 		},
- 	},
- };
-+
-+// Actually this board is the very same as the rta770bw,
-+// where the additional 'b' within the name just
-+// just indicates 'Annex B'. The ADSL Modem itself is able
-+// to handle both Annex A as well as Annex B -
-+// the loaded firmware makes the only difference
-+static struct board_info __initdata board_rta770w = {
-+	.name				= "RTA770W",
-+	.expected_cpu_id		= 0x6345,
-+
-+	.has_uart0			= 1,
-+
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "RTA770W:green:usb",
-+			.gpio		= 7,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "RTA770W:green:adsl",
-+			.gpio		= 8,
-+		},
-+		{
-+			.name		= "RTA770W:green:diag",
-+			.gpio		= 10,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "RTA770W:green:wlan",
-+			.gpio		= 11,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 13,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.active_low	= 1,
-+			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
- #endif
- 
- /*
-@@ -3750,6 +3804,7 @@
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
- 	&board_rta770bw,
-+	&board_rta770w,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,