[brcm63xx] remove support for 3.6 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35506 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 188 deletions

diff --git a/target/linux/brcm63xx/patches-3.6/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.6/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644
index 34ccc047bd..0000000000
--- a/target/linux/brcm63xx/patches-3.6/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
+++ /dev/null
@@ -1,188 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -34,6 +34,7 @@
- #include <board_bcm963xx.h>
- #include <linux/bcm963xx_tag.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- 
- #define PFX	"board_bcm963xx: "
- 
-@@ -982,9 +983,19 @@ int __init board_register_devices(void)
- 	}
- 
- 	/* register any fixups */
--	for (i = 0; i < board.has_caldata; i++)
--		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--			board.caldata[i].endian_check, board.caldata[i].led_pin);
-+	for (i = 0; i < board.has_caldata; i++) {
-+		switch (board.caldata[i].vendor) {
-+		case PCI_VENDOR_ID_ATHEROS:
-+			pci_enable_ath9k_fixup(board.caldata[i].slot,
-+				board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+				board.caldata[i].led_pin);
-+			break;
-+		case PCI_VENDOR_ID_RALINK:
-+			pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+				board.caldata[i].eeprom);
-+			break;
-+		}
-+	}
- 
- 	return 0;
- }
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -146,7 +146,7 @@ static int __init bcm63xx_detect_flash_t
- 	return 0;
- }
- 
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata)
- {
- 	u32 val;
- 	unsigned int i;
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,8 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o setup.o \
- 		   timer.o dev-dsp.o dev-enet.o dev-flash.o dev-hsspi.o \
- 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-usb-ehci.o \
--		   dev-usb-ohci.o dev-wdt.o pci-ath9k-fixup.o
-+		   dev-usb-ohci.o dev-wdt.o pci-ath9k-fixup.o \
-+		   pci-rt2x00-fixup.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,71 @@
-+/*
-+ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+	unsigned slot;
-+	u8 mac[ETH_ALEN];
-+	struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+	{
-+		.slot = 255,
-+	},
-+	{
-+		.slot = 255,
-+	},
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+	unsigned i;
-+	struct rt2x00_platform_data *pdata = NULL;
-+
-+	for (i = 0; i < rt2x00_num_fixups; i++) {
-+		if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+			continue;
-+
-+		pdata = &rt2x00_fixups[i].pdata;
-+		break;
-+	}
-+
-+	dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+	if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+		return;
-+
-+	rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+	rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+	if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+		return;
-+
-+	rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+	rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -11,6 +11,6 @@ enum {
- 
- extern int bcm63xx_attached_flash;
- 
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);
- 
- #endif /* __BCM63XX_FLASH_H */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -8,6 +8,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- 
- /*
-  * flash mapping
-@@ -15,11 +16,15 @@
- #define BCM963XX_CFE_VERSION_OFFSET	0x570
- #define BCM963XX_NVRAM_OFFSET		0x580
- 
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+	unsigned int	vendor;
- 	unsigned int	slot;
- 	u32		caldata_offset;
-+	/* Atheros */
- 	unsigned int	endian_check:1;
- 	int		led_pin;
-+	/* Ralink */
-+	char*		eeprom;
- };
- 
- /*
-@@ -43,7 +48,7 @@ struct board_info {
- 	unsigned int	has_caldata:2;
- 
- 	/* wifi calibration data config */
--	struct ath9k_caldata caldata[2];
-+	struct bcm63xx_caldata caldata[2];
- 
- 	/* ethernet config */
- 	struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+