[brcm63xx] remove support for 3.6 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35506 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 227 deletions

diff --git a/target/linux/brcm63xx/patches-3.6/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-3.6/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch
deleted file mode 100644
index a3b30e4443..0000000000
--- a/target/linux/brcm63xx/patches-3.6/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From fb6f6f58db9ae9cf27ab01f5f09cfbc5c078a7b8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:36:11 +0200
-Subject: [PATCH 66/80] BCM63XX: add a fixup for ath9k devices
-
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
- 3 files changed, 198 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o setup.o \
- 		   timer.o dev-dsp.o dev-enet.o dev-flash.o dev-hsspi.o \
- 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-usb-ehci.o \
--		   dev-usb-ohci.o dev-wdt.o
-+		   dev-usb-ohci.o dev-wdt.o pci-ath9k-fixup.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -0,0 +1,190 @@
-+/*
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <pci_ath9k_fixup.h>
-+
-+struct ath9k_fixup {
-+	unsigned slot;
-+	u8 mac[ETH_ALEN];
-+	struct ath9k_platform_data pdata;
-+};
-+
-+static int ath9k_num_fixups;
-+static struct ath9k_fixup ath9k_fixups[2] = {
-+	{
-+		.slot = 255,
-+		.pdata = {
-+			.led_pin	= -1,
-+		},
-+	},
-+	{
-+		.slot = 255,
-+		.pdata = {
-+			.led_pin	= -1,
-+		},
-+	},
-+};
-+
-+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
-+{
-+	u32 addr;
-+
-+	if (BCMCPU_IS_6328()) {
-+		addr = 0x18000000;
-+	} else {
-+		addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+		addr &= MPI_CSBASE_BASE_MASK;
-+	}
-+
-+	switch (bcm63xx_attached_flash) {
-+	case BCM63XX_FLASH_TYPE_PARALLEL:
-+		memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+		return eeprom;
-+	case BCM63XX_FLASH_TYPE_SERIAL:
-+		/* the first megabyte is memory mapped */
-+		if (offset < 0x100000) {
-+			memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+			return eeprom;
-+		}
-+
-+		if (BCMCPU_IS_6328()) {
-+			/* we can change the memory mapped megabyte */
-+			bcm_hsspi_writel(offset & 0xf00000, 0x18);
-+			memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+			bcm_hsspi_writel(0, 0x18);
-+			return eeprom;
-+		}
-+		/* can't do anything here without talking to the SPI controller. */
-+	case BCM63XX_FLASH_TYPE_NAND:
-+	default:
-+		return NULL;
-+	}
-+}
-+
-+static void ath9k_pci_fixup(struct pci_dev *dev)
-+{
-+	void __iomem *mem;
-+	struct ath9k_platform_data *pdata = NULL;
-+	u16 *cal_data = NULL;
-+	u16 cmd;
-+	u32 bar0;
-+	u32 val;
-+	unsigned i;
-+
-+	for (i = 0; i < ath9k_num_fixups; i++) {
-+		if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-+			continue;
-+
-+		cal_data = ath9k_fixups[i].pdata.eeprom_data;
-+		pdata = &ath9k_fixups[i].pdata;
-+		break;
-+	}
-+
-+	if (cal_data == NULL)
-+		return;
-+
-+	if (*cal_data != 0xa55a) {
-+		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+		return;
-+	}
-+
-+	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6328_CPU_ID:
-+		val = BCM_PCIE_MEM_BASE_PA;
-+		break;
-+	case BCM6348_CPU_ID:
-+	case BCM6358_CPU_ID:
-+	case BCM6368_CPU_ID:
-+		val = BCM_PCI_MEM_BASE_PA;
-+		break;
-+	default:
-+		BUG();
-+	}
-+
-+	mem = ioremap(val, 0x10000);
-+	if (!mem) {
-+		pr_err("pci %s: ioremap error\n", pci_name(dev));
-+		return;
-+	}
-+
-+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	/* set offset to first reg address */
-+	cal_data += 3;
-+	while(*cal_data != 0xffff) {
-+		u32 reg;
-+		reg = *cal_data++;
-+		val = *cal_data++;
-+		val |= (*cal_data++) << 16;
-+
-+		writel(val, mem + reg);
-+		udelay(100);
-+	}
-+
-+	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+	dev->vendor = val & 0xffff;
-+	dev->device = (val >> 16) & 0xffff;
-+
-+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+	dev->revision = val & 0xff;
-+	dev->class = val >> 8; /* upper 3 bytes */
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+	iounmap(mem);
-+
-+	dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-+
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+{
-+	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-+		return;
-+
-+	ath9k_fixups[ath9k_num_fixups].slot = slot;
-+
-+	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-+		return;
-+
-+	if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
-+		return;
-+
-+	ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
-+	ath9k_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -0,0 +1,7 @@
-+#ifndef _PCI_ATH9K_FIXUP
-+#define _PCI_ATH9K_FIXUP
-+
-+
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+
-+#endif /* _PCI_ATH9K_FIXUP */