brcm63xx: add linux 3.10 support

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37481 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 82 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.10/043-MIPS-BCM63XX-Add-SMP-support-to-prom.c.patch b/target/linux/brcm63xx/patches-3.10/043-MIPS-BCM63XX-Add-SMP-support-to-prom.c.patch
new file mode 100644
index 0000000000..23f6d852c8
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/043-MIPS-BCM63XX-Add-SMP-support-to-prom.c.patch
@@ -0,0 +1,82 @@
+From 7c44eabf20cba12049bf9eebfa192afcc2053b2d Mon Sep 17 00:00:00 2001
+From: Kevin Cernekee <cernekee@gmail.com>
+Date: Sat, 9 Jul 2011 12:15:06 -0700
+Subject: [PATCH V2 1/2] MIPS: BCM63XX: Add SMP support to prom.c
+
+This involves two changes to the BSP code:
+
+1) register_smp_ops() for BMIPS SMP
+
+2) The CPU1 boot vector on some of the BCM63xx platforms conflicts with
+the special interrupt vector (IV).  Move it to 0x8000_0380 at boot time,
+to resolve the conflict.
+
+Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
+[jogo@openwrt.org: moved SMP ops registration into ifdef guard,
+ changed ifdef guards to if (IS_ENABLED())]
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+V1 -> V2:
+ * changed ifdef guards to if (IS_ENABLED())
+
+ arch/mips/bcm63xx/prom.c |   41 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 41 insertions(+)
+
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -8,7 +8,11 @@
+ 
+ #include <linux/init.h>
+ #include <linux/bootmem.h>
++#include <linux/smp.h>
+ #include <asm/bootinfo.h>
++#include <asm/bmips.h>
++#include <asm/smp-ops.h>
++#include <asm/mipsregs.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_io.h>
+@@ -54,6 +58,43 @@ void __init prom_init(void)
+ 
+ 	/* do low level board init */
+ 	board_prom_init();
++
++	if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
++		/* set up SMP */
++		register_smp_ops(&bmips_smp_ops);
++
++		/*
++		 * BCM6328 might not have its second CPU enabled, while BCM6358
++		 * needs special handling for its shared TLB, so disable SMP
++		 * for now.
++		 */
++		if (BCMCPU_IS_6328()) {
++			bmips_smp_enabled = 0;
++		} else if (BCMCPU_IS_6358()) {
++			bmips_smp_enabled = 0;
++		}
++
++		if (!bmips_smp_enabled)
++			return;
++
++		/*
++		 * The bootloader has set up the CPU1 reset vector at
++		 * 0xa000_0200.
++		 * This conflicts with the special interrupt vector (IV).
++		 * The bootloader has also set up CPU1 to respond to the wrong
++		 * IPI interrupt.
++		 * Here we will start up CPU1 in the background and ask it to
++		 * reconfigure itself then go back to sleep.
++		 */
++		memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
++		__sync();
++		set_c0_cause(C_SW0);
++		cpumask_set_cpu(1, &bmips_booted_mask);
++
++		/*
++		 * FIXME: we really should have some sort of hazard barrier here
++		 */
++	}
+ }
+ 
+ void __init prom_free_prom_memory(void)