remove 2.6.34 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26229 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 92 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch b/target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch
deleted file mode 100644
index 413558120f..0000000000
--- a/target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From ca00adabb88dd1194891624836d7574aab2d7c05 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Jul 2010 21:25:03 +0200
-Subject: [PATCH 1/2] USB: Add USB 2.0 to ssb ohci driver
-
-This adds USB 2.0 support to ssb ohci driver.
-This patch was used in OpenWRT for a long time now.
-
-CC: Steve Brown <sbrown@cortland.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/ohci-ssb.c |   52 ++++++++++++++++++++++++++++++++++++++++--
- 1 files changed, 49 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -93,8 +93,11 @@ static void ssb_ohci_detach(struct ssb_d
- {
- 	struct usb_hcd *hcd = ssb_get_drvdata(dev);
- 
-+	if (hcd->driver->shutdown)
-+		hcd->driver->shutdown(hcd);
- 	usb_remove_hcd(hcd);
- 	iounmap(hcd->regs);
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- 	usb_put_hcd(hcd);
- 	ssb_device_disable(dev, 0);
- }
-@@ -106,10 +109,52 @@ static int ssb_ohci_attach(struct ssb_de
- 	int err = -ENOMEM;
- 	u32 tmp, flags = 0;
- 
--	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
--		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+		return -EOPNOTSUPP;
- 
--	ssb_device_enable(dev, flags);
-+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
-+		/* Put the device into host-mode. */
-+		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-+		ssb_device_enable(dev, flags);
-+	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+		/*
-+		 * USB 2.0 special considerations:
-+		 *
-+		 * In addition to the standard SSB reset sequence, the Host
-+		 * Control Register must be programmed to bring the USB core
-+		 * and various phy components out of reset.
-+		 */
-+		ssb_device_enable(dev, 0);
-+		ssb_write32(dev, 0x200, 0x7ff);
-+
-+		/* Change Flush control reg */
-+		tmp = ssb_read32(dev, 0x400);
-+		tmp &= ~8;
-+		ssb_write32(dev, 0x400, tmp);
-+		tmp = ssb_read32(dev, 0x400);
-+
-+		/* Change Shim control reg */
-+		tmp = ssb_read32(dev, 0x304);
-+		tmp &= ~0x100;
-+		ssb_write32(dev, 0x304, tmp);
-+		tmp = ssb_read32(dev, 0x304);
-+
-+		udelay(1);
-+
-+		/* Work around for 5354 failures */
-+		if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-+			/* Change syn01 reg */
-+			tmp = 0x00fe00fe;
-+			ssb_write32(dev, 0x894, tmp);
-+
-+			/* Change syn03 reg */
-+			tmp = ssb_read32(dev, 0x89c);
-+			tmp |= 0x1;
-+			ssb_write32(dev, 0x89c, tmp);
-+		}
-+	} else
-+		ssb_device_enable(dev, 0);
- 
- 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
- 			dev_name(dev->dev));
-@@ -200,6 +245,7 @@ static int ssb_ohci_resume(struct ssb_de
- static const struct ssb_device_id ssb_ohci_table[] = {
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
- 	SSB_DEVTABLE_END
- };
- MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);