summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch
diff options
context:
space:
mode:
authorhauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-07-19 20:25:20 +0000
committerhauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-07-19 20:25:20 +0000
commit9fe2a2d5546fe9370eb9c977d0816dc32e31d461 (patch)
treed5497947876a46c2d56f2f702552f5f0b942ce0f /target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch
parent03685da10dba687075810931c495f38abac9ba8c (diff)
brcm47xx: prepare brcm47xx patches for sending to mainline.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22296 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch')
-rw-r--r--target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch95
1 files changed, 95 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch b/target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch
new file mode 100644
index 0000000000..91eadaade4
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch
@@ -0,0 +1,95 @@
+From cb33ffbdd8491c58b35958ec74c39b3a5c7fabe8 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 21:25:03 +0200
+Subject: [PATCH 1/2] USB: Add USB 2.0 to ssb ohci driver
+
+This adds USB 2.0 support to ssb ohci driver.
+This work was done based on Braodcom source code in the OpenWRT project.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/ohci-ssb.c | 55 ++++++++++++++++++++++++++++++++++++++++--
+ 1 files changed, 52 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -92,9 +92,12 @@ static const struct hc_driver ssb_ohci_h
+ static void ssb_ohci_detach(struct ssb_device *dev)
+ {
+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
++ if (hcd->driver->shutdown)
++ hcd->driver->shutdown(hcd);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ ssb_device_disable(dev, 0);
+ }
+@@ -106,10 +109,55 @@ static int ssb_ohci_attach(struct ssb_de
+ int err = -ENOMEM;
+ u32 tmp, flags = 0;
+
+- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
++ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++ return -EOPNOTSUPP;
+
+- ssb_device_enable(dev, flags);
++ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
++ /* Put the device into host-mode. */
++ flags |= SSB_OHCI_TMSLOW_HOSTMODE;
++ ssb_device_enable(dev, flags);
++ } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
++ /*
++ * USB 2.0 special considerations:
++ *
++ * 1. Since the core supports both ehci and EHCI functions, it must
++ * only be reset once.
++ *
++ * 2. In addition to the standard SSB reset sequence, the Host Control
++ * Register must be programmed to bring the USB core and various
++ * phy components out of reset.
++ */
++ ssb_device_enable(dev, 0);
++ ssb_write32(dev, 0x200, 0x7ff);
++
++ /* Change Flush control reg */
++ tmp = ssb_read32(dev, 0x400);
++ tmp &= ~8;
++ ssb_write32(dev, 0x400, tmp);
++ tmp = ssb_read32(dev, 0x400);
++
++ /* Change Shim control reg */
++ tmp = ssb_read32(dev, 0x304);
++ tmp &= ~0x100;
++ ssb_write32(dev, 0x304, tmp);
++ tmp = ssb_read32(dev, 0x304);
++
++ udelay(1);
++
++ /* Work around for 5354 failures */
++ if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
++ /* Change syn01 reg */
++ tmp = 0x00fe00fe;
++ ssb_write32(dev, 0x894, tmp);
++
++ /* Change syn03 reg */
++ tmp = ssb_read32(dev, 0x89c);
++ tmp |= 0x1;
++ ssb_write32(dev, 0x89c, tmp);
++ }
++ } else
++ ssb_device_enable(dev, 0);
+
+ hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+ dev_name(dev->dev));
+@@ -200,6 +248,7 @@ static int ssb_ohci_resume(struct ssb_de
+ static const struct ssb_device_id ssb_ohci_table[] = {
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+ SSB_DEVTABLE_END
+ };
+ MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);