add back the base-files/image code from brcm-2.4 to brcm47xx

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73

12 files changed, 461 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/base-files/etc/diag.sh b/target/linux/brcm47xx/base-files/etc/diag.sh
new file mode 100644
index 0000000000..3b08554c64
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/etc/diag.sh
@@ -0,0 +1,28 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+set_led() {
+	local led="$1"
+	local state="$2"
+	[ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
+}
+
+set_state() {
+	case "$1" in
+		preinit)
+			set_led dmz 1
+			set_led diag 1
+			set_led power 0
+		;;
+		failsafe)
+			set_led diag f
+			set_led power f
+			set_led dmz f
+		;;
+		done)
+			set_led dmz 0
+			set_led diag 0
+			set_led power 1
+		;;
+	esac
+}
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
new file mode 100755
index 0000000000..d7839b6b49
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
@@ -0,0 +1,248 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=05
+
+start() {
+	[ -e /etc/config/network ] && {
+		local batch
+
+		config_cb() {
+			case "$1" in
+			switch)
+				option_cb() {
+					case "$1" in
+					vlan[0-9]|vlan1[0-5])
+						local id="${1#vlan}"
+						local ports="${2%\*}"
+						append batch "delete network.eth0.${1}${N}"
+						append batch "set network.eth0_${id}=switch_vlan${N}"
+						append batch "set network.eth0_${id}.device=eth0${N}"
+						append batch "set network.eth0_${id}.vlan=${id}${N}"
+						append batch "set network.eth0_${id}.ports='${ports}'${N}"
+					;;
+					esac
+				}
+			;;
+			switch_vlan)
+				option_cb() { :; }
+				batch=""
+			;;
+			esac
+		}
+
+		config_load network
+
+		[ -n "$batch" ] && {
+			logger -t netconfig "migrating switch config to new format ..."
+			echo "$batch${N}commit network" | uci batch
+		}
+
+		exit 0
+	}
+
+	mkdir -p /etc/config
+
+	(
+		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
+			# WGT634u
+			echo boardtype=wgt634u
+		else
+			strings "$(find_mtd_part nvram)"
+		fi
+	) | awk '
+	function p(cfgname, name) {
+		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
+	}
+
+	function vlan(id, name) {
+		if (c[name] != "") {
+			print "config switch_vlan eth0_" id
+			print "	option device   \"eth0\""
+			print "	option vlan     " id
+			print "	option ports    \"" c[name] "\""
+			print ""
+		}
+	}
+
+	function macinc(mac, maca, i, result) {
+		split(mac, maca, ":")
+		for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
+		if (++maca[6] > 0xff) {
+			maca[5]++
+			maca[6] = 0
+		}
+		for (i = 1; i <= 6; i++) {
+			if (i != 1) result = result ":"
+			result = result sprintf("%02x", maca[i])
+		}
+		return result
+	}
+
+	BEGIN {
+		FS="="
+		c["lan_ifname"]="eth0.0"
+		c["wan_ifname"]="eth0.1"
+		c["vlan0ports"]="1 2 3 4 5"
+		c["vlan1ports"]="0 5"
+		getline < "/proc/diag/model"
+		model=$0
+		for (i = 0; i < 6; i++) {
+			if (mac_check != "") mac_check = mac_check ":"
+			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
+		}
+	}
+
+	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
+		nvram[$1] = $2
+	}
+
+	END {
+		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
+			c["wan_ifname"] = ""
+			c["lan_ifname"] = "eth1"
+		}
+		if (model == "ASUS WL-330gE") {
+			c["wan_ifname"] = ""
+			c["lan_ifname"] = "eth0"
+			c["vlan0ports"] = ""
+			c["vlan1ports"] = ""
+		}
+		if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
+			c["wan_ifname"] = "eth1"
+			c["lan_ifname"] = "eth0"
+		}
+		if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
+			c["vlan0ports"] = "0 1 2 3 5"
+			c["vlan1ports"] = "4 5"
+		}
+		if (model == "Dell TrueMobile 2300") {
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+		}
+		if (nvram["boardtype"] == "bcm94710r4") {
+			# Toshiba WRC-1000
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+		}
+		if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
+			c["vlan0ports"] = "0 1 2 3 5"
+			c["vlan1ports"] = "4 5"
+		}
+		if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
+			if (nvram["boardnum"] == "45") {
+				# WL-500gP
+				c["vlan0ports"] = "1 2 3 4 5"
+				c["vlan1ports"] = "0 5"
+			} else {
+				# Generic BCM94704
+				c["vlan0ports"] = "0 1 2 3 4 5u"
+				c["vlan1ports"] = ""
+				c["lan_ifname"] = "eth0"
+				c["wan_ifname"] = "eth1"
+
+				# MAC addresses on 4704 tend to be screwed up. Add a workaround here
+				if (nvram["et0macaddr"] ~ mac_check) {
+					c["lan_macaddr"] = nvram["et0macaddr"]
+					c["wan_macaddr"] = macinc(c["lan_macaddr"])
+				}
+			}
+		}
+		# Buffalo WBR-B11 and Buffalo WBR-G54
+		if (nvram["boardtype"] == "bcm94710ap") {
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+		}
+		# generic broadcom 4705/4785 processor with 5397 switch?
+		#  EXCEPT Linksys WRT300N V1.1
+		if ((nvram["boardtype"] == "0x478") && \
+		    (model != "Linksys WRT300N V1.1")) {
+			c["vlan0ports"] = "1 2 3 4 8*"
+			c["vlan1ports"] = "0 8"
+		}
+
+		# WAP54G
+		if ((nvram["boardnum"] == "2") || \
+			(nvram["boardnum"] == "1024")) {
+			c["lan_ifname"]="eth0"
+			c["wan_ifname"]=""
+		}
+
+		# Sitecom WL-105b
+		if ((nvram["boardum"] == "2") && \
+			(nvram["GemtekPmonVer"] == "1")) {
+			c["lan_ifname"]="eth0"
+			c["wan_ifname"]=""
+		}
+
+		# ASUS WL-700gE
+		# These are actually same as defaults above. For some reason this script applies
+		# Generic BCM94704 settings instead so we revert to proper settings here.
+		# Hopefully someone will fix this properly soon.
+		if (model == "ASUS WL-700gE") {
+			c["lan_ifname"]="eth0.0"
+			c["wan_ifname"]="eth0.1"
+			c["vlan0ports"]="1 2 3 4 5"
+			c["vlan1ports"]="0 5"
+		}
+
+		if (model == "Motorola WR850G V2/V3") {
+			c["vlan0ports"]="0 1 2 3 5"
+			c["vlan1ports"]="4 5"
+		}
+		if (model == "ASUS WL-500W") {
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+		}
+		if (model == "OvisLink WL-1600GL") {
+			c["lan_ifname"] = "eth0.0"
+			c["wan_ifname"] = "eth0.1"
+			c["vlan0ports"] = "0 1 2 3 5"
+			c["vlan1ports"] = "4 5"
+		}
+
+		if (c["vlan0ports"] || c["vlan1ports"]) {
+			print "#### VLAN configuration "
+			print "config switch eth0"
+			print "	option enable   1"
+			print ""		
+			vlan(0, "vlan0ports")
+			vlan(1, "vlan1ports")
+		}
+		print "#### Loopback configuration"
+		print "config interface loopback"
+		print "	option ifname	\"lo\""
+		print "	option proto	static"
+		print "	option ipaddr	127.0.0.1"
+		print "	option netmask	255.0.0.0"
+		print ""
+		print ""
+		print "#### LAN configuration"
+		print "config interface lan"
+		print "	option type 	bridge"
+		p("ifname", "lan_ifname")
+		p("macaddr", "lan_macaddr")
+		print "	option proto	static"
+		print "	option ipaddr	192.168.1.1"
+		print "	option netmask	255.255.255.0"
+		print ""
+		print ""
+		if (c["wan_ifname"]) {
+			print "#### WAN configuration"
+			print "config interface	wan"
+			p("ifname", "wan_ifname")
+			p("macaddr", "wan_macaddr")
+			print "	option proto	dhcp"
+		} else {
+			print "#### WAN configuration (disabled)"
+			print "#config interface wan"
+			print "#	option proto	dhcp"
+		}
+	}' > /etc/config/network
+}
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup b/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup
new file mode 100755
index 0000000000..ee1b752201
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup
@@ -0,0 +1,33 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2010 OpenWrt.org
+
+START=41
+
+boot() {
+	[ -d /sys/class/ieee80211 ] || exit
+
+	commit=0
+
+	fixup_wmac() {
+		local cfg="$1"
+		local cfmac
+
+		config_get cfmac "$cfg" macaddr
+
+		[ "$cfmac" != "00:90:4c:5f:00:2a" ] || {
+			local nvmac="$(nvram get il0macaddr 2>/dev/null)"
+			[ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && {
+				uci set wireless.$cfg.macaddr="$nvmac"
+				commit=1
+			}
+		}
+	}
+
+	config_load wireless
+	config_foreach fixup_wmac wifi-device
+
+	[ "$commit" = 1 ] && uci commit wireless
+}
+
+start() { :; }
+stop()  { :; }
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm b/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm
new file mode 100644
index 0000000000..b0f4a4efa9
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+init_hotplug_failsafe() {
+	echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
+}
+
+boot_hook_add preinit_main init_hotplug_failsafe
+
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
new file mode 100644
index 0000000000..3cd760e2db
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+set_preinit_iface() {
+	ifname=eth0
+
+	insmod diag
+
+	# hardware specific overrides
+	case "$(cat /proc/diag/model)" in
+		"Linksys WAP54G V1") ifname=eth1;;
+		"ASUS WL-HDD") ifname=eth1;;
+		"ASUS WL-300g") ifname=eth1;;
+		"ASUS (unknown, BCM4702)") ifname=eth1;;
+		"Sitecom WL-105b") ifname=eth1;;
+	esac
+	ifconfig $ifname 0.0.0.0 up
+}
+
+check_module () {
+  module="$1"; shift; params="$*"
+
+  insmod "$module" "$params"
+  sleep 1
+  grep "^$module" /proc/modules
+  return $?
+}
+
+init_iface() {
+	check_module tg3
+	insmod switch-core
+	check_module switch-robo || check_module switch-adm  || { 
+	  check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
+	} || rmmod switch-core
+}
+
+boot_hook_add preinit_main set_preinit_iface
+boot_hook_add preinit_main init_iface
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
new file mode 100644
index 0000000000..a93559f97b
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+failsafe_ip() {
+	[ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
+		ifconfig eth0 0.0.0.0 down
+		echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+	}
+	
+	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+        	ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+        }
+}
+
+boot_hook_add failsafe failsafe_ip
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm
new file mode 100644
index 0000000000..fd5add16a5
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+do_mount_procfs() {
+	mount none /proc -t proc
+}
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
new file mode 100644
index 0000000000..fdc7c71ca7
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+port_net_echo() {
+	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+		if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then 
+			netmsg $pi_broadcast "$1"
+		fi
+	}
+}
+
+preinit_ip_deconfig() {
+	if [ -z "$pi_ifname" ]; then
+		ifconfig $ifname 0.0.0.0 down
+	else
+		grep -q "$pi_ifname" /proc/net/dev && {
+			ifconfig $pi_ifname 0.0.0.0 down
+		}
+	fi
+}
+
+preinit_net_echo() {
+	preinit_ip
+	
+	[ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
+		echo 1 > /proc/switch/eth0/reset
+
+		# this would be easier if we blasted the message across all ports
+		# but we don't want packets leaking across interfaces
+		for port in $(seq 0 4); do {
+			echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+			port_net_echo $1
+		}; done
+		
+		echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+		
+	} || port_net_echo $1
+}
+
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm
new file mode 100644
index 0000000000..f030cb2837
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+indicate_failsafe() {
+	preinit_net_echo() {
+		port_net_echo $1
+	}
+	echo "- failsafe -"
+	preinit_net_echo "Entering Failsafe!\n"
+	indicate_failsafe_led
+}
+
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm
new file mode 100644
index 0000000000..da721b8484
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+. /etc/functions.sh
+
+set_boot_wait() {
+	[ -x "/usr/sbin/nvram" ] && {
+		[ "$(nvram get boot_wait)" != "on" ] && {
+			nvram set boot_wait=on
+			nvram commit
+		}
+	}
+}
+
+boot_hook_add failsafe set_boot_wait
diff --git a/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh b/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..9921cf571a
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,16 @@
+PART_NAME=linux
+
+platform_check_image() {
+	[ "$ARGC" -gt 1 ] && return 1
+
+	case "$(get_magic_word "$1")" in
+		# .trx files
+		4844) return 0;;
+		*)
+			echo "Invalid image type. Please use only .trx files"
+			return 1
+		;;
+	esac
+}
+
+# use default for platform_do_upgrade()
diff --git a/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe b/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe
new file mode 100755
index 0000000000..0544339de8
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe
@@ -0,0 +1,4 @@
+#!/bin/sh
+case "$1" in
+	button) kill -USR1 1;;
+esac