move platform specific base-files into target/linux/<targetname>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5621 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 98 insertions, 0 deletions

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
new file mode 100755
index 0000000000..fe39f50516
--- /dev/null
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -0,0 +1,98 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=05
+
+start() {
+	[ -e /etc/config/network ] && exit 0
+
+	mkdir -p /etc/config
+
+	(
+		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
+			# WGT634u
+			echo boardtype=wgt634u
+		else
+			strings /dev/mtdblock/3
+		fi
+	) | awk '
+	function p(cfgname, name) {
+		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
+	}
+	
+	BEGIN {
+		FS="="
+		c["lan_ifname"]="eth0.0"
+		c["wan_ifname"]="eth0.1"
+		c["vlan0ports"]="1 2 3 4 5*"
+		c["vlan1ports"]="0 5"
+	}
+	
+	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+		nvram[$1] = $2
+	}
+	
+	END {
+		# v1 hardware
+		if (nvram["boardtype"] == "bcm94710dev") {
+			# Asus WL-500g
+			if (nvram["boardnum"] == "asusX") {
+				c["lan_ifname"]="eth0 eth1" # FIXME
+				c["wan_ifname"]=""
+			}
+		}
+		if (nvram["boardtype"] == "bcm94710r4") {
+			# Toshiba WRC-1000
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+		}
+		if (nvram["boardtype"] == "wgt634u") {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+		}
+		if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+			if (nvram["boardnum"] == "45") {
+				c["vlan0ports"] = "1 2 3 4 5*"
+				c["vlan1ports"] = "0 5"
+			} else {
+				c["vlan0ports"] = "0 1 2 3 5*"
+				c["vlan1ports"] = "4 5"
+			}
+		}
+	
+		# WAP54G
+		if ((nvram["boardnum"] == "2") || \
+			(nvram["boardnum"] == "1024")) {
+			c["lan_ifname"]="eth0"
+			c["wan_ifname"]=""
+		}
+	
+		print "#### VLAN configuration "
+		print "config switch eth0"
+		p("vlan0", "vlan0ports")
+		p("vlan1", "vlan1ports")
+		print ""
+		print ""
+		print "#### Loopback configuration"
+		print "config interface loopback"
+		print "	option ifname	\"lo\""
+		print "	option proto	static"
+		print "	option ipaddr	127.0.0.1"
+		print "	option netmask	255.0.0.0"
+		print ""
+		print ""
+		print "#### LAN configuration"
+		print "config interface lan"
+		print "	option type 	bridge"
+		p("ifname", "lan_ifname")
+		print "	option proto	static"
+		print "	option ipaddr	192.168.1.1"
+		print "	option netmask	255.255.255.0"
+		print ""
+		print ""
+		print "#### WAN configuration"
+		print "config interface	wan"
+		p("ifname", "wan_ifname")
+		print "	option proto	dhcp"
+	}' > /etc/config/network
+}