avr32: switch to 3.3.2

uClibc-0.9.33 causes segfaults at least in iptables.
The segfaults are present with 2.6.39 as well, so it
makes no sense to stick to that version.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31351 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 112 insertions, 0 deletions

diff --git a/target/linux/avr32/config-3.3 b/target/linux/avr32/config-3.3
new file mode 100644
index 0000000000..4b0833b8b7
--- /dev/null
+++ b/target/linux/avr32/config-3.3
@@ -0,0 +1,112 @@
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_32_BIT_SMC is not set
+# CONFIG_AP700X_8_BIT_SMC is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_AT32AP700X_WDT=m
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_ATMEL_SSC is not set
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_TCLIB=y
+CONFIG_AVR32=y
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BOARD_ATNGW100_ADDON_NONE=y
+CONFIG_BOARD_ATNGW100_COMMON=y
+# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
+CONFIG_BOARD_ATNGW100_MKI=y
+# CONFIG_BOARD_ATNGW100_MKII is not set
+# CONFIG_BOARD_ATNGW100_MRMT is not set
+# CONFIG_BOARD_ATSTK1000 is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_HAMMERHEAD is not set
+# CONFIG_BOARD_MERISC is not set
+# CONFIG_BOARD_MIMC200 is not set
+CONFIG_CPU_AT32AP7000=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DW_DMAC=y
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GPIOLIB=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_ARCH_BOOTMEM is not set
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_FB_ATMEL=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_NET_MACB=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LEDS_GPIO=y
+CONFIG_LOADER_U_BOOT=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_MACB=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MMC=m
+CONFIG_MMC_ATMELMCI=m
+# CONFIG_MMC_ATMELMCI_DMA is not set
+CONFIG_MMC_BLOCK=m
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_NET_DMA is not set
+# CONFIG_NMI_DEBUGGING is not set
+CONFIG_NO_HZ=y
+CONFIG_NR_QUICK=2
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PHYLIB=y
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PLATFORM_AT32AP=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_QUICKLIST=y
+# CONFIG_QUOTACTL is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT32AP700X=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0