diff options
author | kaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-12-27 21:28:02 +0000 |
---|---|---|
committer | kaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-12-27 21:28:02 +0000 |
commit | b281497b69f2ecc02747c8e5d9cdd2b19cf95429 (patch) | |
tree | 180b2c74131eb4d4bd7c855e1de0ca28bda8127c /target/linux/au1000 | |
parent | 259f6426607dfd76f98eb9ffa44cb88554ffeffc (diff) |
switch ixp4xx and ubicom32 to 2.6.30, get rid of 2.6.28 files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18952 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/au1000')
6 files changed, 0 insertions, 474 deletions
diff --git a/target/linux/au1000/patches-2.6.28/001-mtx1_cmdline.patch b/target/linux/au1000/patches-2.6.28/001-mtx1_cmdline.patch deleted file mode 100644 index a45832765c..0000000000 --- a/target/linux/au1000/patches-2.6.28/001-mtx1_cmdline.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/alchemy/mtx-1/init.c -+++ b/arch/mips/alchemy/mtx-1/init.c -@@ -49,7 +49,7 @@ void __init prom_init(void) - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - -- prom_init_cmdline(); -+ strcpy(arcs_cmdline, CONFIG_CMDLINE); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) diff --git a/target/linux/au1000/patches-2.6.28/002-openwrt_rootfs.patch b/target/linux/au1000/patches-2.6.28/002-openwrt_rootfs.patch deleted file mode 100644 index e1056e93d9..0000000000 --- a/target/linux/au1000/patches-2.6.28/002-openwrt_rootfs.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/alchemy/mtx-1/platform.c -+++ b/arch/mips/alchemy/mtx-1/platform.c -@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_ - - static struct mtd_partition mtx1_mtd_partitions[] = { - { -- .name = "filesystem", -+ .name = "rootfs", - .size = 0x01C00000, - .offset = 0, - }, diff --git a/target/linux/au1000/patches-2.6.28/003-au1000_eth_ioctl.patch b/target/linux/au1000/patches-2.6.28/003-au1000_eth_ioctl.patch deleted file mode 100644 index 4b152f3aad..0000000000 --- a/target/linux/au1000/patches-2.6.28/003-au1000_eth_ioctl.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/drivers/net/au1000_eth.c -+++ b/drivers/net/au1000_eth.c -@@ -1293,9 +1293,12 @@ static void set_rx_mode(struct net_devic - } - } - -+#define AU1000_KNOWN_PHY_IOCTLS (SIOCGMIIPHY & 0xfff0) - static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) - { - struct au1000_private *aup = (struct au1000_private *)dev->priv; -+ if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS) -+ return -EINVAL; - - if (!netif_running(dev)) return -EINVAL; - diff --git a/target/linux/au1000/patches-2.6.28/004-state_led_phy_fix.patch b/target/linux/au1000/patches-2.6.28/004-state_led_phy_fix.patch deleted file mode 100644 index e681970c5b..0000000000 --- a/target/linux/au1000/patches-2.6.28/004-state_led_phy_fix.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/net/au1000_eth.c -+++ b/drivers/net/au1000_eth.c -@@ -184,6 +184,15 @@ struct au1000_private *au_macs[NUM_ETH_I - # undef AU1XXX_PHY1_IRQ - #endif - -+#if defined(CONFIG_MIPS_MTX1) -+/* -+ * 4G MeshCube (MTX-1) board -+ * PHY is at address 31 on MAC0 -+ * autodetect fails if not searched for highest address ! -+ */ -+# define AU1XXX_PHY_SEARCH_HIGHEST_ADDR -+#endif -+ - #if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0) - # error MAC0-associated PHY attached 2nd MACs MII bus not supported yet - #endif -@@ -380,6 +389,12 @@ static int mii_probe (struct net_device - aup->old_duplex = -1; - aup->phy_dev = phydev; - -+#ifdef CONFIG_MIPS_MTX1 -+ /* set up ethernet jack LEDs on the 4G MeshCube (MTX-1 board) */ -+ printk(KERN_INFO "MTX-1 PHY: updating LED settings\n"); -+ phy_write(phydev, 0x11, 0xff80); -+#endif -+ - printk(KERN_INFO "%s: attached PHY driver [%s] " - "(mii_bus:phy_addr=%s, irq=%d)\n", - dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq); diff --git a/target/linux/au1000/patches-2.6.28/006-missing_string_header.patch b/target/linux/au1000/patches-2.6.28/006-missing_string_header.patch deleted file mode 100644 index 8aba202521..0000000000 --- a/target/linux/au1000/patches-2.6.28/006-missing_string_header.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/alchemy/mtx-1/init.c -+++ b/arch/mips/alchemy/mtx-1/init.c -@@ -32,6 +32,7 @@ - #include <linux/init.h> - - #include <asm/bootinfo.h> -+#include <asm/string.h> - - #include <prom.h> - diff --git a/target/linux/au1000/patches-2.6.28/007-gpiolib.patch b/target/linux/au1000/patches-2.6.28/007-gpiolib.patch deleted file mode 100644 index bd4b5635a8..0000000000 --- a/target/linux/au1000/patches-2.6.28/007-gpiolib.patch +++ /dev/null @@ -1,396 +0,0 @@ ---- a/arch/mips/alchemy/Kconfig -+++ b/arch/mips/alchemy/Kconfig -@@ -134,3 +134,4 @@ config SOC_AU1X00 - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_APM_EMULATION -+ select ARCH_REQUIRE_GPIOLIB ---- a/arch/mips/alchemy/common/gpio.c -+++ b/arch/mips/alchemy/common/gpio.c -@@ -1,5 +1,5 @@ - /* -- * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2007-2008, OpenWrt.org, Florian Fainelli <florian@openwrt.org> - * Architecture specific GPIO support - * - * This program is free software; you can redistribute it and/or modify it -@@ -27,122 +27,222 @@ - * others have a second one : GPIO2 - */ - -+#include <linux/kernel.h> - #include <linux/module.h> -+#include <linux/types.h> -+#include <linux/platform_device.h> -+#include <linux/gpio.h> - - #include <asm/mach-au1x00/au1000.h> --#include <asm/gpio.h> -+#include <asm/mach-au1x00/gpio.h> - --#define gpio1 sys --#if !defined(CONFIG_SOC_AU1000) -+struct au1000_gpio_chip { -+ struct gpio_chip chip; -+ void __iomem *regbase; -+}; - --static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE; -+#if !defined(CONFIG_SOC_AU1000) - #define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 - --static int au1xxx_gpio2_read(unsigned gpio) -+/* -+ * Return GPIO bank 2 level -+ */ -+static int au1000_gpio2_get(struct gpio_chip *chip, unsigned offset) - { -- gpio -= AU1XXX_GPIO_BASE; -- return ((gpio2->pinstate >> gpio) & 0x01); -+ u32 mask = 1 << offset; -+ struct au1000_gpio_chip *gpch; -+ -+ gpch = container_of(chip, struct au1000_gpio_chip, chip); -+ return readl(gpch->regbase + AU1000_GPIO2_ST) & mask; - } - --static void au1xxx_gpio2_write(unsigned gpio, int value) -+/* -+ * Set output GPIO bank 2 level -+ */ -+static void au1000_gpio2_set(struct gpio_chip *chip, -+ unsigned offset, int value) - { -- gpio -= AU1XXX_GPIO_BASE; -- -- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); -+ u32 mask = (!!value) << offset; -+ struct au1000_gpio_chip *gpch; -+ unsigned long flags; -+ -+ gpch = container_of(chip, struct au1000_gpio_chip, chip); -+ -+ local_irq_save(flags); -+ writel((GPIO2_OUTPUT_ENABLE_MASK << offset) | mask, -+ gpch->regbase + AU1000_GPIO2_OUT); -+ local_irq_restore(flags); - } - --static int au1xxx_gpio2_direction_input(unsigned gpio) -+/* -+ * Set GPIO bank 2 direction to input -+ */ -+static int au1000_gpio2_direction_input(struct gpio_chip *chip, unsigned offset) - { -- gpio -= AU1XXX_GPIO_BASE; -- gpio2->dir &= ~(0x01 << gpio); -+ unsigned long flags; -+ u32 mask = 1 << offset; -+ u32 value; -+ struct au1000_gpio_chip *gpch; -+ void __iomem *gpdr; -+ -+ gpch = container_of(chip, struct au1000_gpio_chip, chip); -+ gpdr = gpch->regbase + AU1000_GPIO2_DIR; -+ -+ local_irq_save(flags); -+ value = readl(gpdr); -+ value &= ~mask; -+ writel(value, gpdr); -+ local_irq_restore(flags); -+ - return 0; - } - --static int au1xxx_gpio2_direction_output(unsigned gpio, int value) -+/* -+ * Set GPIO bank2 direction to output -+ */ -+static int au1000_gpio2_direction_output(struct gpio_chip *chip, -+ unsigned offset, int value) - { -- gpio -= AU1XXX_GPIO_BASE; -- gpio2->dir |= 0x01 << gpio; -- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); -+ unsigned long flags; -+ u32 mask = 1 << offset; -+ u32 tmp; -+ struct au1000_gpio_chip *gpch; -+ void __iomem *gpdr; -+ -+ gpch = container_of(chip, struct au1000_gpio_chip, chip); -+ gpdr = gpch->regbase + AU1000_GPIO2_DIR; -+ -+ local_irq_save(flags); -+ tmp = readl(gpdr); -+ tmp |= mask; -+ writel(tmp, gpdr); -+ mask = (!!value) << offset; -+ writel((GPIO2_OUTPUT_ENABLE_MASK << offset) | mask, -+ gpch->regbase + AU1000_GPIO2_OUT); -+ local_irq_restore(flags); -+ - return 0; - } -- - #endif /* !defined(CONFIG_SOC_AU1000) */ - --static int au1xxx_gpio1_read(unsigned gpio) -+/* -+ * Return GPIO bank 2 level -+ */ -+static int au1000_gpio1_get(struct gpio_chip *chip, unsigned offset) - { -- return (gpio1->pinstaterd >> gpio) & 0x01; -+ u32 mask = 1 << offset; -+ struct au1000_gpio_chip *gpch; -+ -+ gpch = container_of(chip, struct au1000_gpio_chip, chip); -+ return readl(gpch->regbase + 0x0110) & mask; - } - --static void au1xxx_gpio1_write(unsigned gpio, int value) -+/* -+ * Set GPIO bank 1 level -+ */ -+static void au1000_gpio1_set(struct gpio_chip *chip, -+ unsigned offset, int value) - { -+ unsigned long flags; -+ u32 mask = 1 << offset; -+ struct au1000_gpio_chip *gpch; -+ -+ gpch = container_of(chip, struct au1000_gpio_chip, chip); -+ -+ local_irq_save(flags); - if (value) -- gpio1->outputset = (0x01 << gpio); -+ writel(mask, gpch->regbase + 0x0108); - else -- /* Output a zero */ -- gpio1->outputclr = (0x01 << gpio); -+ writel(mask, gpch->regbase + 0x010C); -+ local_irq_restore(flags); - } - --static int au1xxx_gpio1_direction_input(unsigned gpio) -+/* -+ * Set GPIO bank 1 direction to input -+ */ -+static int au1000_gpio1_direction_input(struct gpio_chip *chip, unsigned offset) - { -- gpio1->pininputen = (0x01 << gpio); -- return 0; --} -+ unsigned long flags; -+ u32 mask = 1 << offset; -+ u32 value; -+ struct au1000_gpio_chip *gpch; -+ void __iomem *gpdr; -+ -+ gpch = container_of(chip, struct au1000_gpio_chip, chip); -+ gpdr = gpch->regbase + 0x0110; -+ -+ local_irq_save(flags); -+ value = readl(gpdr); -+ value |= mask; -+ writel(mask, gpdr); -+ local_irq_restore(flags); - --static int au1xxx_gpio1_direction_output(unsigned gpio, int value) --{ -- gpio1->trioutclr = (0x01 & gpio); -- au1xxx_gpio1_write(gpio, value); - return 0; - } - --int au1xxx_gpio_get_value(unsigned gpio) -+/* -+ * Set GPIO bank 1 direction to output -+ */ -+static int au1000_gpio1_direction_output(struct gpio_chip *chip, -+ unsigned offset, int value) - { -- if (gpio >= AU1XXX_GPIO_BASE) --#if defined(CONFIG_SOC_AU1000) -- return 0; --#else -- return au1xxx_gpio2_read(gpio); --#endif -+ unsigned long flags; -+ u32 mask = 1 << offset; -+ u32 tmp; -+ struct au1000_gpio_chip *gpch; -+ void __iomem *gpdr; -+ -+ gpch = container_of(chip, struct au1000_gpio_chip, chip); -+ gpdr = gpch->regbase + 0x0100; -+ -+ local_irq_save(flags); -+ tmp = readl(gpdr); -+ writel(tmp, gpdr); -+ if (value) -+ writel(mask, gpch->regbase + 0x0108); - else -- return au1xxx_gpio1_read(gpio); --} --EXPORT_SYMBOL(au1xxx_gpio_get_value); -+ writel(mask, gpch->regbase + 0x0108); -+ local_irq_restore(flags); - --void au1xxx_gpio_set_value(unsigned gpio, int value) --{ -- if (gpio >= AU1XXX_GPIO_BASE) --#if defined(CONFIG_SOC_AU1000) -- ; --#else -- au1xxx_gpio2_write(gpio, value); --#endif -- else -- au1xxx_gpio1_write(gpio, value); -+ return 0; - } --EXPORT_SYMBOL(au1xxx_gpio_set_value); - --int au1xxx_gpio_direction_input(unsigned gpio) --{ -- if (gpio >= AU1XXX_GPIO_BASE) --#if defined(CONFIG_SOC_AU1000) -- return -ENODEV; --#else -- return au1xxx_gpio2_direction_input(gpio); -+struct au1000_gpio_chip au1000_gpio_chip[] = { -+ [0] = { -+ .regbase = (void __iomem *)SYS_BASE, -+ .chip = { -+ .label = "au1000-gpio1", -+ .direction_input = au1000_gpio1_direction_input, -+ .direction_output = au1000_gpio1_direction_output, -+ .get = au1000_gpio1_get, -+ .set = au1000_gpio1_set, -+ .base = 0, -+ .ngpio = 32, -+ }, -+ }, -+#if !defined(CONFIG_SOC_AU1000) -+ [1] = { -+ .regbase = (void __iomem *)GPIO2_BASE, -+ .chip = { -+ .label = "au1000-gpio2", -+ .direction_input = au1000_gpio2_direction_input, -+ .direction_output = au1000_gpio2_direction_output, -+ .get = au1000_gpio2_get, -+ .set = au1000_gpio2_set, -+ .base = AU1XXX_GPIO_BASE, -+ .ngpio = 32, -+ }, -+ }, - #endif -+}; - -- return au1xxx_gpio1_direction_input(gpio); --} --EXPORT_SYMBOL(au1xxx_gpio_direction_input); -- --int au1xxx_gpio_direction_output(unsigned gpio, int value) -+int __init au1000_gpio_init(void) - { -- if (gpio >= AU1XXX_GPIO_BASE) --#if defined(CONFIG_SOC_AU1000) -- return -ENODEV; --#else -- return au1xxx_gpio2_direction_output(gpio, value); -+ gpiochip_add(&au1000_gpio_chip[0].chip); -+#if !defined(CONFIG_SOC_AU1000) -+ gpiochip_add(&au1000_gpio_chip[1].chip); - #endif - -- return au1xxx_gpio1_direction_output(gpio, value); -+ return 0; - } --EXPORT_SYMBOL(au1xxx_gpio_direction_output); -+arch_initcall(au1000_gpio_init); ---- a/arch/mips/include/asm/mach-au1x00/gpio.h -+++ b/arch/mips/include/asm/mach-au1x00/gpio.h -@@ -1,69 +1,21 @@ - #ifndef _AU1XXX_GPIO_H_ - #define _AU1XXX_GPIO_H_ - --#include <linux/types.h> -- - #define AU1XXX_GPIO_BASE 200 - --struct au1x00_gpio2 { -- u32 dir; -- u32 reserved; -- u32 output; -- u32 pinstate; -- u32 inten; -- u32 enable; --}; -- --extern int au1xxx_gpio_get_value(unsigned gpio); --extern void au1xxx_gpio_set_value(unsigned gpio, int value); --extern int au1xxx_gpio_direction_input(unsigned gpio); --extern int au1xxx_gpio_direction_output(unsigned gpio, int value); -- -- --/* Wrappers for the arch-neutral GPIO API */ -- --static inline int gpio_request(unsigned gpio, const char *label) --{ -- /* Not yet implemented */ -- return 0; --} -- --static inline void gpio_free(unsigned gpio) --{ -- /* Not yet implemented */ --} -- --static inline int gpio_direction_input(unsigned gpio) --{ -- return au1xxx_gpio_direction_input(gpio); --} -- --static inline int gpio_direction_output(unsigned gpio, int value) --{ -- return au1xxx_gpio_direction_output(gpio, value); --} -- --static inline int gpio_get_value(unsigned gpio) --{ -- return au1xxx_gpio_get_value(gpio); --} -- --static inline void gpio_set_value(unsigned gpio, int value) --{ -- au1xxx_gpio_set_value(gpio, value); --} -- --static inline int gpio_to_irq(unsigned gpio) --{ -- return gpio; --} -- --static inline int irq_to_gpio(unsigned irq) --{ -- return irq; --} -+#define AU1000_GPIO2_DIR 0x00 -+#define AU1000_GPIO2_RSVD 0x04 -+#define AU1000_GPIO2_OUT 0x08 -+#define AU1000_GPIO2_ST 0x0C -+#define AU1000_GPIO2_INT 0x10 -+#define AU1000_GPIO2_EN 0x14 -+ -+#define gpio_get_value __gpio_get_value -+#define gpio_set_value __gpio_set_value -+ -+#define gpio_to_irq(gpio) NULL -+#define irq_to_gpio(irq) NULL - --/* For cansleep */ - #include <asm-generic/gpio.h> - - #endif /* _AU1XXX_GPIO_H_ */ |