atheros: add kernel 2.6.35 preliminary support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21703 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 1596 insertions, 0 deletions

diff --git a/target/linux/atheros/patches-2.6.35/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.35/110-ar2313_ethernet.patch
new file mode 100644
index 0000000000..5c6e5568ed
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.35/110-ar2313_ethernet.patch
@@ -0,0 +1,1596 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -371,6 +371,12 @@ config AX88796_93CX6
+ 	help
+ 	  Select this if your platform comes with an external 93CX6 eeprom.
+ 
++config AR231X_ETHERNET
++	tristate "AR231x Ethernet support"
++	depends on ATHEROS_AR231X
++	help
++	  Support for the AR231x/531x ethernet controller
++
+ config MACE
+ 	tristate "MACE (Power Mac ethernet) support"
+ 	depends on PPC_PMAC && PPC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -221,6 +221,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+ obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
++obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
+ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
+ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
+ obj-$(CONFIG_DECLANCE) += declance.o
+--- /dev/null
++++ b/drivers/net/ar231x.c
+@@ -0,0 +1,1263 @@
++/*
++ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Additional credits:
++ * 	This code is taken from John Taylor's Sibyte driver and then
++ * 	modified for the AR2313.
++ */
++
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/pci.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <linux/highmem.h>
++#include <linux/sockios.h>
++#include <linux/pkt_sched.h>
++#include <linux/mii.h>
++#include <linux/phy.h>
++#include <linux/ethtool.h>
++#include <linux/ctype.h>
++#include <linux/platform_device.h>
++
++#include <net/sock.h>
++#include <net/ip.h>
++
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/byteorder.h>
++#include <asm/uaccess.h>
++#include <asm/bootinfo.h>
++
++#define AR2313_MTU                     1692
++#define AR2313_PRIOS                   1
++#define AR2313_QUEUES                  (2*AR2313_PRIOS)
++#define AR2313_DESCR_ENTRIES           64
++
++
++#ifndef min
++#define min(a,b)	(((a)<(b))?(a):(b))
++#endif
++
++#ifndef SMP_CACHE_BYTES
++#define SMP_CACHE_BYTES	L1_CACHE_BYTES
++#endif
++
++#define AR2313_MBOX_SET_BIT  0x8
++
++#include "ar231x.h"
++
++/*
++ * New interrupt handler strategy:
++ *
++ * An old interrupt handler worked using the traditional method of
++ * replacing an skbuff with a new one when a packet arrives. However
++ * the rx rings do not need to contain a static number of buffer
++ * descriptors, thus it makes sense to move the memory allocation out
++ * of the main interrupt handler and do it in a bottom half handler
++ * and only allocate new buffers when the number of buffers in the
++ * ring is below a certain threshold. In order to avoid starving the
++ * NIC under heavy load it is however necessary to force allocation
++ * when hitting a minimum threshold. The strategy for alloction is as
++ * follows:
++ *
++ *     RX_LOW_BUF_THRES    - allocate buffers in the bottom half
++ *     RX_PANIC_LOW_THRES  - we are very low on buffers, allocate
++ *                           the buffers in the interrupt handler
++ *     RX_RING_THRES       - maximum number of buffers in the rx ring
++ *
++ * One advantagous side effect of this allocation approach is that the
++ * entire rx processing can be done without holding any spin lock
++ * since the rx rings and registers are totally independent of the tx
++ * ring and its registers.  This of course includes the kmalloc's of
++ * new skb's. Thus start_xmit can run in parallel with rx processing
++ * and the memory allocation on SMP systems.
++ *
++ * Note that running the skb reallocation in a bottom half opens up
++ * another can of races which needs to be handled properly. In
++ * particular it can happen that the interrupt handler tries to run
++ * the reallocation while the bottom half is either running on another
++ * CPU or was interrupted on the same CPU. To get around this the
++ * driver uses bitops to prevent the reallocation routines from being
++ * reentered.
++ *
++ * TX handling can also be done without holding any spin lock, wheee
++ * this is fun! since tx_csm is only written to by the interrupt
++ * handler.
++ */
++
++/*
++ * Threshold values for RX buffer allocation - the low water marks for
++ * when to start refilling the rings are set to 75% of the ring
++ * sizes. It seems to make sense to refill the rings entirely from the
++ * intrrupt handler once it gets below the panic threshold, that way
++ * we don't risk that the refilling is moved to another CPU when the
++ * one running the interrupt handler just got the slab code hot in its
++ * cache.
++ */
++#define RX_RING_SIZE		AR2313_DESCR_ENTRIES
++#define RX_PANIC_THRES	        (RX_RING_SIZE/4)
++#define RX_LOW_THRES	        ((3*RX_RING_SIZE)/4)
++#define CRC_LEN                 4
++#define RX_OFFSET               2
++
++#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
++#define VLAN_HDR                4
++#else
++#define VLAN_HDR                0
++#endif
++
++#define AR2313_BUFSIZE		(AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
++
++#ifdef MODULE
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
++MODULE_DESCRIPTION("AR231x Ethernet driver");
++#endif
++
++#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
++
++// prototypes
++static void ar231x_halt(struct net_device *dev);
++static void rx_tasklet_func(unsigned long data);
++static void rx_tasklet_cleanup(struct net_device *dev);
++static void ar231x_multicast_list(struct net_device *dev);
++
++static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
++static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
++static int ar231x_mdiobus_reset(struct mii_bus *bus);
++static int ar231x_mdiobus_probe (struct net_device *dev);
++static void ar231x_adjust_link(struct net_device *dev);
++
++#ifndef ERR
++#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
++#endif
++
++static const struct net_device_ops ar231x_ops = {
++	.ndo_open = ar231x_open,
++	.ndo_stop = ar231x_close,
++	.ndo_start_xmit = ar231x_start_xmit,
++	.ndo_set_multicast_list = ar231x_multicast_list,
++	.ndo_do_ioctl = ar231x_ioctl,
++};
++
++int __init ar231x_probe(struct platform_device *pdev)
++{
++	struct net_device *dev;
++	struct ar231x_private *sp;
++	struct resource *res;
++	unsigned long ar_eth_base;
++	char buf[64];
++
++	dev = alloc_etherdev(sizeof(struct ar231x_private));
++
++	if (dev == NULL) {
++		printk(KERN_ERR
++			   "ar231x: Unable to allocate net_device structure!\n");
++		return -ENOMEM;
++	}
++
++	platform_set_drvdata(pdev, dev);
++
++	sp = netdev_priv(dev);
++	sp->dev = dev;
++	sp->cfg = pdev->dev.platform_data;
++
++	sprintf(buf, "eth%d_membase", pdev->id);
++	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
++	if (!res)
++		return -ENODEV;
++
++	sp->link = 0;
++	ar_eth_base = res->start;
++
++	sprintf(buf, "eth%d_irq", pdev->id);
++	dev->irq = platform_get_irq_byname(pdev, buf);
++
++	spin_lock_init(&sp->lock);
++
++	dev->features |= NETIF_F_HIGHDMA;
++	dev->netdev_ops = &ar231x_ops;
++
++	tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
++	tasklet_disable(&sp->rx_tasklet);
++
++	sp->eth_regs =
++		ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
++	if (!sp->eth_regs) {
++		printk("Can't remap eth registers\n");
++		return (-ENXIO);
++	}
++
++	/*
++	 * When there's only one MAC, PHY regs are typically on ENET0,
++	 * even though the MAC might be on ENET1.
++	 * Needto remap PHY regs separately in this case
++	 */
++	if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
++		sp->phy_regs = sp->eth_regs;
++	else {
++		sp->phy_regs =
++			ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
++							sizeof(*sp->phy_regs));
++		if (!sp->phy_regs) {
++			printk("Can't remap phy registers\n");
++			return (-ENXIO);
++		}
++	}
++
++	sp->dma_regs =
++		ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
++						sizeof(*sp->dma_regs));
++	dev->base_addr = (unsigned int) sp->dma_regs;
++	if (!sp->dma_regs) {
++		printk("Can't remap DMA registers\n");
++		return (-ENXIO);
++	}
++
++	sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
++	if (!sp->int_regs) {
++		printk("Can't remap INTERRUPT registers\n");
++		return (-ENXIO);
++	}
++
++	strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
++	sp->name[sizeof(sp->name) - 1] = '\0';
++	memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
++
++	if (ar231x_init(dev)) {
++		/*
++		 * ar231x_init() calls ar231x_init_cleanup() on error.
++		 */
++		kfree(dev);
++		return -ENODEV;
++	}
++
++	if (register_netdev(dev)) {
++		printk("%s: register_netdev failed\n", __func__);
++		return -1;
++	}
++
++	printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
++		   dev->name, sp->name,
++		   dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
++		   dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
++
++	sp->mii_bus = mdiobus_alloc();
++	if (sp->mii_bus == NULL)
++		return -1;
++
++	sp->mii_bus->priv = dev;
++	sp->mii_bus->read = ar231x_mdiobus_read;
++	sp->mii_bus->write = ar231x_mdiobus_write;
++	sp->mii_bus->reset = ar231x_mdiobus_reset;
++	sp->mii_bus->name = "ar231x_eth_mii";
++	snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
++	sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
++	*sp->mii_bus->irq = PHY_POLL;
++
++	mdiobus_register(sp->mii_bus);
++
++	if (ar231x_mdiobus_probe(dev) != 0) {
++		printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
++		rx_tasklet_cleanup(dev);
++		ar231x_init_cleanup(dev);
++		unregister_netdev(dev);
++		kfree(dev);
++		return -ENODEV;
++	}
++
++	/* start link poll timer */
++	ar231x_setup_timer(dev);
++
++	return 0;
++}
++
++
++static void ar231x_multicast_list(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int filter;
++
++	filter = sp->eth_regs->mac_control;
++
++	if (dev->flags & IFF_PROMISC)
++		filter |= MAC_CONTROL_PR;
++	else
++		filter &= ~MAC_CONTROL_PR;
++	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
++		filter |= MAC_CONTROL_PM;
++	else
++		filter &= ~MAC_CONTROL_PM;
++
++	sp->eth_regs->mac_control = filter;
++}
++
++static void rx_tasklet_cleanup(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	/*
++	 * Tasklet may be scheduled. Need to get it removed from the list
++	 * since we're about to free the struct.
++	 */
++
++	sp->unloading = 1;
++	tasklet_enable(&sp->rx_tasklet);
++	tasklet_kill(&sp->rx_tasklet);
++}
++
++static int __devexit ar231x_remove(struct platform_device *pdev)
++{
++	struct net_device *dev = platform_get_drvdata(pdev);
++	struct ar231x_private *sp = netdev_priv(dev);
++	rx_tasklet_cleanup(dev);
++	ar231x_init_cleanup(dev);
++	unregister_netdev(dev);
++	mdiobus_unregister(sp->mii_bus);
++	mdiobus_free(sp->mii_bus);
++	kfree(dev);
++	return 0;
++}
++
++
++/*
++ * Restart the AR2313 ethernet controller.
++ */
++static int ar231x_restart(struct net_device *dev)
++{
++	/* disable interrupts */
++	disable_irq(dev->irq);
++
++	/* stop mac */
++	ar231x_halt(dev);
++
++	/* initialize */
++	ar231x_init(dev);
++
++	/* enable interrupts */
++	enable_irq(dev->irq);
++
++	return 0;
++}
++
++static struct platform_driver ar231x_driver = {
++	.driver.name = "ar231x-eth",
++	.probe = ar231x_probe,
++	.remove = __devexit_p(ar231x_remove),
++};
++
++int __init ar231x_module_init(void)
++{
++	return platform_driver_register(&ar231x_driver);
++}
++
++void __exit ar231x_module_cleanup(void)
++{
++	platform_driver_unregister(&ar231x_driver);
++}
++
++module_init(ar231x_module_init);
++module_exit(ar231x_module_cleanup);
++
++
++static void ar231x_free_descriptors(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	if (sp->rx_ring != NULL) {
++		kfree((void *) KSEG0ADDR(sp->rx_ring));
++		sp->rx_ring = NULL;
++		sp->tx_ring = NULL;
++	}
++}
++
++
++static int ar231x_allocate_descriptors(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	int size;
++	int j;
++	ar231x_descr_t *space;
++
++	if (sp->rx_ring != NULL) {
++		printk("%s: already done.\n", __FUNCTION__);
++		return 0;
++	}
++
++	size =
++		(sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
++	space = kmalloc(size, GFP_KERNEL);
++	if (space == NULL)
++		return 1;
++
++	/* invalidate caches */
++	dma_cache_inv((unsigned int) space, size);
++
++	/* now convert pointer to KSEG1 */
++	space = (ar231x_descr_t *) KSEG1ADDR(space);
++
++	memset((void *) space, 0, size);
++
++	sp->rx_ring = space;
++	space += AR2313_DESCR_ENTRIES;
++
++	sp->tx_ring = space;
++	space += AR2313_DESCR_ENTRIES;
++
++	/* Initialize the transmit Descriptors */
++	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++		ar231x_descr_t *td = &sp->tx_ring[j];
++		td->status = 0;
++		td->devcs = DMA_TX1_CHAINED;
++		td->addr = 0;
++		td->descr =
++			virt_to_phys(&sp->
++						 tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
++	}
++
++	return 0;
++}
++
++
++/*
++ * Generic cleanup handling data allocated during init. Used when the
++ * module is unloaded or if an error occurs during initialization
++ */
++static void ar231x_init_cleanup(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	struct sk_buff *skb;
++	int j;
++
++	ar231x_free_descriptors(dev);
++
++	if (sp->eth_regs)
++		iounmap((void *) sp->eth_regs);
++	if (sp->dma_regs)
++		iounmap((void *) sp->dma_regs);
++
++	if (sp->rx_skb) {
++		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++			skb = sp->rx_skb[j];
++			if (skb) {
++				sp->rx_skb[j] = NULL;
++				dev_kfree_skb(skb);
++			}
++		}
++		kfree(sp->rx_skb);
++		sp->rx_skb = NULL;
++	}
++
++	if (sp->tx_skb) {
++		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++			skb = sp->tx_skb[j];
++			if (skb) {
++				sp->tx_skb[j] = NULL;
++				dev_kfree_skb(skb);
++			}
++		}
++		kfree(sp->tx_skb);
++		sp->tx_skb = NULL;
++	}
++}
++
++static int ar231x_setup_timer(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	init_timer(&sp->link_timer);
++
++	sp->link_timer.function = ar231x_link_timer_fn;
++	sp->link_timer.data = (int) dev;
++	sp->link_timer.expires = jiffies + HZ;
++
++	add_timer(&sp->link_timer);
++	return 0;
++
++}
++
++static void ar231x_link_timer_fn(unsigned long data)
++{
++	struct net_device *dev = (struct net_device *) data;
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	// see if the link status changed
++	// This was needed to make sure we set the PHY to the
++	// autonegotiated value of half or full duplex.
++	ar231x_check_link(dev);
++
++	// Loop faster when we don't have link.
++	// This was needed to speed up the AP bootstrap time.
++	if (sp->link == 0) {
++		mod_timer(&sp->link_timer, jiffies + HZ / 2);
++	} else {
++		mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
++	}
++}
++
++static void ar231x_check_link(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	u16 phyData;
++
++	phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
++	if (sp->phyData != phyData) {
++		if (phyData & BMSR_LSTATUS) {
++			/* link is present, ready link partner ability to deterine
++			   duplexity */
++			int duplex = 0;
++			u16 reg;
++
++			sp->link = 1;
++			reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
++			if (reg & BMCR_ANENABLE) {
++				/* auto neg enabled */
++				reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
++				duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
++			} else {
++				/* no auto neg, just read duplex config */
++				duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
++			}
++
++			printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
++				   dev->name, (duplex) ? "full" : "half");
++
++			if (duplex) {
++				/* full duplex */
++				sp->eth_regs->mac_control =
++					((sp->eth_regs->
++					  mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
++			} else {
++				/* half duplex */
++				sp->eth_regs->mac_control =
++					((sp->eth_regs->
++					  mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
++			}
++		} else {
++			/* no link */
++			sp->link = 0;
++		}
++		sp->phyData = phyData;
++	}
++}
++
++static int ar231x_reset_reg(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int ethsal, ethsah;
++	unsigned int flags;
++
++	*sp->int_regs |= sp->cfg->reset_mac;
++	mdelay(10);
++	*sp->int_regs &= ~sp->cfg->reset_mac;
++	mdelay(10);
++	*sp->int_regs |= sp->cfg->reset_phy;
++	mdelay(10);
++	*sp->int_regs &= ~sp->cfg->reset_phy;
++	mdelay(10);
++
++	sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
++	mdelay(10);
++	sp->dma_regs->bus_mode =
++		((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
++
++	/* enable interrupts */
++	sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
++							  DMA_STATUS_NIS |
++							  DMA_STATUS_RI |
++							  DMA_STATUS_TI | DMA_STATUS_FBE);
++	sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
++	sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
++	sp->dma_regs->control =
++		(DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
++
++	sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
++	sp->eth_regs->vlan_tag = (0x8100);
++
++	/* Enable Ethernet Interface */
++	flags = (MAC_CONTROL_TE |	/* transmit enable */
++			 MAC_CONTROL_PM |	/* pass mcast */
++			 MAC_CONTROL_F |	/* full duplex */
++			 MAC_CONTROL_HBD);	/* heart beat disabled */
++
++	if (dev->flags & IFF_PROMISC) {	/* set promiscuous mode */
++		flags |= MAC_CONTROL_PR;
++	}
++	sp->eth_regs->mac_control = flags;
++
++	/* Set all Ethernet station address registers to their initial values */
++	ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++			  (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
++
++	ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++			  (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++			  (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++			  (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
++
++	sp->eth_regs->mac_addr[0] = ethsah;
++	sp->eth_regs->mac_addr[1] = ethsal;
++
++	mdelay(10);
++
++	return (0);
++}
++
++
++static int ar231x_init(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	int ecode = 0;
++
++	/*
++	 * Allocate descriptors
++	 */
++	if (ar231x_allocate_descriptors(dev)) {
++		printk("%s: %s: ar231x_allocate_descriptors failed\n",
++			   dev->name, __FUNCTION__);
++		ecode = -EAGAIN;
++		goto init_error;
++	}
++
++	/*
++	 * Get the memory for the skb rings.
++	 */
++	if (sp->rx_skb == NULL) {
++		sp->rx_skb =
++			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++					GFP_KERNEL);
++		if (!(sp->rx_skb)) {
++			printk("%s: %s: rx_skb kmalloc failed\n",
++				   dev->name, __FUNCTION__);
++			ecode = -EAGAIN;
++			goto init_error;
++		}
++	}
++	memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++	if (sp->tx_skb == NULL) {
++		sp->tx_skb =
++			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++					GFP_KERNEL);
++		if (!(sp->tx_skb)) {
++			printk("%s: %s: tx_skb kmalloc failed\n",
++				   dev->name, __FUNCTION__);
++			ecode = -EAGAIN;
++			goto init_error;
++		}
++	}
++	memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++	/*
++	 * Set tx_csm before we start receiving interrupts, otherwise
++	 * the interrupt handler might think it is supposed to process
++	 * tx ints before we are up and running, which may cause a null
++	 * pointer access in the int handler.
++	 */
++	sp->rx_skbprd = 0;
++	sp->cur_rx = 0;
++	sp->tx_prd = 0;
++	sp->tx_csm = 0;
++
++	/*
++	 * Zero the stats before starting the interface
++	 */
++	memset(&dev->stats, 0, sizeof(dev->stats));
++
++	/*
++	 * We load the ring here as there seem to be no way to tell the
++	 * firmware to wipe the ring without re-initializing it.
++	 */
++	ar231x_load_rx_ring(dev, RX_RING_SIZE);
++
++	/*
++	 * Init hardware
++	 */
++	ar231x_reset_reg(dev);
++
++	/*
++	 * Get the IRQ
++	 */
++	ecode =
++		request_irq(dev->irq, &ar231x_interrupt,
++					IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
++					dev->name, dev);
++	if (ecode) {
++		printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
++			   dev->name, __FUNCTION__, dev->irq);
++		goto init_error;
++	}
++
++
++	tasklet_enable(&sp->rx_tasklet);
++
++	return 0;
++
++  init_error:
++	ar231x_init_cleanup(dev);
++	return ecode;
++}
++
++/*
++ * Load the rx ring.
++ *
++ * Loading rings is safe without holding the spin lock since this is
++ * done only before the device is enabled, thus no interrupts are
++ * generated and by the interrupt handler/tasklet handler.
++ */
++static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
++{
++
++	struct ar231x_private *sp = netdev_priv(dev);
++	short i, idx;
++
++	idx = sp->rx_skbprd;
++
++	for (i = 0; i < nr_bufs; i++) {
++		struct sk_buff *skb;
++		ar231x_descr_t *rd;
++
++		if (sp->rx_skb[idx])
++			break;
++
++		skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
++		if (!skb) {
++			printk("\n\n\n\n %s: No memory in system\n\n\n\n",
++				   __FUNCTION__);
++			break;
++		}
++
++		/*
++		 * Make sure IP header starts on a fresh cache line.
++		 */
++		skb->dev = dev;
++		skb_reserve(skb, RX_OFFSET);
++		sp->rx_skb[idx] = skb;
++
++		rd = (ar231x_descr_t *) & sp->rx_ring[idx];
++
++		/* initialize dma descriptor */
++		rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++					 DMA_RX1_CHAINED);
++		rd->addr = virt_to_phys(skb->data);
++		rd->descr =
++			virt_to_phys(&sp->
++						 rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
++		rd->status = DMA_RX_OWN;
++
++		idx = DSC_NEXT(idx);
++	}
++
++	if (i)
++		sp->rx_skbprd = idx;
++
++	return;
++}
++
++#define AR2313_MAX_PKTS_PER_CALL        64
++
++static int ar231x_rx_int(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	struct sk_buff *skb, *skb_new;
++	ar231x_descr_t *rxdesc;
++	unsigned int status;
++	u32 idx;
++	int pkts = 0;
++	int rval;
++
++	idx = sp->cur_rx;
++
++	/* process at most the entire ring and then wait for another interrupt
++	 */
++	while (1) {
++
++		rxdesc = &sp->rx_ring[idx];
++		status = rxdesc->status;
++		if (status & DMA_RX_OWN) {
++			/* SiByte owns descriptor or descr not yet filled in */
++			rval = 0;
++			break;
++		}
++
++		if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
++			rval = 1;
++			break;
++		}
++
++		if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
++			dev->stats.rx_errors++;
++			dev->stats.rx_dropped++;
++
++			/* add statistics counters */
++			if (status & DMA_RX_ERR_CRC)
++				dev->stats.rx_crc_errors++;
++			if (status & DMA_RX_ERR_COL)
++				dev->stats.rx_over_errors++;
++			if (status & DMA_RX_ERR_LENGTH)
++				dev->stats.rx_length_errors++;
++			if (status & DMA_RX_ERR_RUNT)
++				dev->stats.rx_over_errors++;
++			if (status & DMA_RX_ERR_DESC)
++				dev->stats.rx_over_errors++;
++
++		} else {
++			/* alloc new buffer. */
++			skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
++			if (skb_new != NULL) {
++
++				skb = sp->rx_skb[idx];
++				/* set skb */
++				skb_put(skb,
++						((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
++
++				dev->stats.rx_bytes += skb->len;
++				skb->protocol = eth_type_trans(skb, dev);
++				/* pass the packet to upper layers */
++				netif_rx(skb);
++
++				skb_new->dev = dev;
++				/* 16 bit align */
++				skb_reserve(skb_new, RX_OFFSET);
++				/* reset descriptor's curr_addr */
++				rxdesc->addr = virt_to_phys(skb_new->data);
++
++				dev->stats.rx_packets++;
++				sp->rx_skb[idx] = skb_new;
++			} else {
++				dev->stats.rx_dropped++;
++			}
++		}
++
++		rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++						 DMA_RX1_CHAINED);
++		rxdesc->status = DMA_RX_OWN;
++
++		idx = DSC_NEXT(idx);
++	}
++
++	sp->cur_rx = idx;
++
++	return rval;
++}
++
++
++static void ar231x_tx_int(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	u32 idx;
++	struct sk_buff *skb;
++	ar231x_descr_t *txdesc;
++	unsigned int status = 0;
++
++	idx = sp->tx_csm;
++
++	while (idx != sp->tx_prd) {
++		txdesc = &sp->tx_ring[idx];
++
++		if ((status = txdesc->status) & DMA_TX_OWN) {
++			/* ar231x dma still owns descr */
++			break;
++		}
++		/* done with this descriptor */
++		dma_unmap_single(NULL, txdesc->addr,
++						 txdesc->devcs & DMA_TX1_BSIZE_MASK,
++						 DMA_TO_DEVICE);
++		txdesc->status = 0;
++
++		if (status & DMA_TX_ERROR) {
++			dev->stats.tx_errors++;
++			dev->stats.tx_dropped++;
++			if (status & DMA_TX_ERR_UNDER)
++				dev->stats.tx_fifo_errors++;
++			if (status & DMA_TX_ERR_HB)
++				dev->stats.tx_heartbeat_errors++;
++			if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
++				dev->stats.tx_carrier_errors++;
++			if (status & (DMA_TX_ERR_LATE |
++						  DMA_TX_ERR_COL |
++						  DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
++				dev->stats.tx_aborted_errors++;
++		} else {
++			/* transmit OK */
++			dev->stats.tx_packets++;
++		}
++
++		skb = sp->tx_skb[idx];
++		sp->tx_skb[idx] = NULL;
++		idx = DSC_NEXT(idx);
++		dev->stats.tx_bytes += skb->len;
++		dev_kfree_skb_irq(skb);
++	}
++
++	sp->tx_csm = idx;
++
++	return;
++}
++
++
++static void rx_tasklet_func(unsigned long data)
++{
++	struct net_device *dev = (struct net_device *) data;
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	if (sp->unloading) {
++		return;
++	}
++
++	if (ar231x_rx_int(dev)) {
++		tasklet_hi_schedule(&sp->rx_tasklet);
++	} else {
++		unsigned long flags;
++		spin_lock_irqsave(&sp->lock, flags);
++		sp->dma_regs->intr_ena |= DMA_STATUS_RI;
++		spin_unlock_irqrestore(&sp->lock, flags);
++	}
++}
++
++static void rx_schedule(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
++
++	tasklet_hi_schedule(&sp->rx_tasklet);
++}
++
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
++{
++	struct net_device *dev = (struct net_device *) dev_id;
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int status, enabled;
++
++	/* clear interrupt */
++	/*
++	 * Don't clear RI bit if currently disabled.
++	 */
++	status = sp->dma_regs->status;
++	enabled = sp->dma_regs->intr_ena;
++	sp->dma_regs->status = status & enabled;
++
++	if (status & DMA_STATUS_NIS) {
++		/* normal status */
++		/*
++		 * Don't schedule rx processing if interrupt
++		 * is already disabled.
++		 */
++		if (status & enabled & DMA_STATUS_RI) {
++			/* receive interrupt */
++			rx_schedule(dev);
++		}
++		if (status & DMA_STATUS_TI) {
++			/* transmit interrupt */
++			ar231x_tx_int(dev);
++		}
++	}
++
++	/* abnormal status */
++	if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
++		ar231x_restart(dev);
++	}
++	return IRQ_HANDLED;
++}
++
++
++static int ar231x_open(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int ethsal, ethsah;
++
++	/* reset the hardware, in case the MAC address changed */
++	ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++			  (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
++
++	ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++			  (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++			  (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++			  (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
++
++	sp->eth_regs->mac_addr[0] = ethsah;
++	sp->eth_regs->mac_addr[1] = ethsal;
++
++	mdelay(10);
++
++	dev->mtu = 1500;
++	netif_start_queue(dev);
++
++	sp->eth_regs->mac_control |= MAC_CONTROL_RE;
++
++	return 0;
++}
++
++static void ar231x_halt(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	int j;
++
++	tasklet_disable(&sp->rx_tasklet);
++
++	/* kill the MAC */
++	sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE |	/* disable Receives */
++								   MAC_CONTROL_TE);	/* disable Transmits */
++	/* stop dma */
++	sp->dma_regs->control = 0;
++	sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
++
++	/* place phy and MAC in reset */
++	*sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
++
++	/* free buffers on tx ring */
++	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++		struct sk_buff *skb;
++		ar231x_descr_t *txdesc;
++
++		txdesc = &sp->tx_ring[j];
++		txdesc->descr = 0;
++
++		skb = sp->tx_skb[j];
++		if (skb) {
++			dev_kfree_skb(skb);
++			sp->tx_skb[j] = NULL;
++		}
++	}
++}
++
++/*
++ * close should do nothing. Here's why. It's called when
++ * 'ifconfig bond0 down' is run. If it calls free_irq then
++ * the irq is gone forever ! When bond0 is made 'up' again,
++ * the ar231x_open () does not call request_irq (). Worse,
++ * the call to ar231x_halt() generates a WDOG reset due to
++ * the write to 'sp->int_regs' and the box reboots.
++ * Commenting this out is good since it allows the
++ * system to resume when bond0 is made up again.
++ */
++static int ar231x_close(struct net_device *dev)
++{
++#if 0
++	/*
++	 * Disable interrupts
++	 */
++	disable_irq(dev->irq);
++
++	/*
++	 * Without (or before) releasing irq and stopping hardware, this
++	 * is an absolute non-sense, by the way. It will be reset instantly
++	 * by the first irq.
++	 */
++	netif_stop_queue(dev);
++
++	/* stop the MAC and DMA engines */
++	ar231x_halt(dev);
++
++	/* release the interrupt */
++	free_irq(dev->irq, dev);
++
++#endif
++	return 0;
++}
++
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	ar231x_descr_t *td;
++	u32 idx;
++
++	idx = sp->tx_prd;
++	td = &sp->tx_ring[idx];
++
++	if (td->status & DMA_TX_OWN) {
++		/* free skbuf and lie to the caller that we sent it out */
++		dev->stats.tx_dropped++;
++		dev_kfree_skb(skb);
++
++		/* restart transmitter in case locked */
++		sp->dma_regs->xmt_poll = 0;
++		return 0;
++	}
++
++	/* Setup the transmit descriptor. */
++	td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
++				 (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
++	td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++	td->status = DMA_TX_OWN;
++
++	/* kick transmitter last */
++	sp->dma_regs->xmt_poll = 0;
++
++	sp->tx_skb[idx] = skb;
++	idx = DSC_NEXT(idx);
++	sp->tx_prd = idx;
++
++	return 0;
++}
++
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++	struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
++	struct ar231x_private *sp = netdev_priv(dev);
++	int ret;
++
++	switch (cmd) {
++
++	case SIOCETHTOOL:
++		spin_lock_irq(&sp->lock);
++		ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
++		spin_unlock_irq(&sp->lock);
++		return ret;
++
++	case SIOCSIFHWADDR:
++		if (copy_from_user
++			(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
++			return -EFAULT;
++		return 0;
++
++	case SIOCGIFHWADDR:
++		if (copy_to_user
++			(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
++			return -EFAULT;
++		return 0;
++
++	case SIOCGMIIPHY:
++	case SIOCGMIIREG:
++	case SIOCSMIIREG:
++		return phy_mii_ioctl(sp->phy_dev, data, cmd);
++
++	default:
++		break;
++	}
++
++	return -EOPNOTSUPP;
++}
++
++static void ar231x_adjust_link(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int mc;
++
++	if (!sp->phy_dev->link)
++		return;
++
++	if (sp->phy_dev->duplex != sp->oldduplex) {
++		mc = readl(&sp->eth_regs->mac_control);
++		mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
++		if (sp->phy_dev->duplex)
++			mc |= MAC_CONTROL_F;
++		else
++			mc |= MAC_CONTROL_DRO;
++		writel(mc, &sp->eth_regs->mac_control);
++		sp->oldduplex = sp->phy_dev->duplex;
++	}
++}
++
++#define MII_ADDR(phy, reg) \
++	((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
++
++static int
++ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
++{
++	struct net_device *const dev = bus->priv;
++	struct ar231x_private *sp = netdev_priv(dev);
++	volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
++
++	ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
++	while (ethernet->mii_addr & MII_ADDR_BUSY);
++	return (ethernet->mii_data >> MII_DATA_SHIFT);
++}
++
++static int
++ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
++             u16 value)
++{
++	struct net_device *const dev = bus->priv;
++	struct ar231x_private *sp = netdev_priv(dev);
++	volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
++
++	while (ethernet->mii_addr & MII_ADDR_BUSY);
++	ethernet->mii_data = value << MII_DATA_SHIFT;
++	ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
++
++	return 0;
++}
++
++static int ar231x_mdiobus_reset(struct mii_bus *bus)
++{
++	struct net_device *const dev = bus->priv;
++
++	ar231x_reset_reg(dev);
++
++	return 0;
++}
++
++static int ar231x_mdiobus_probe (struct net_device *dev)
++{
++	struct ar231x_private *const sp = netdev_priv(dev);
++	struct phy_device *phydev = NULL;
++	int phy_addr;
++
++	/* find the first (lowest address) PHY on the current MAC's MII bus */
++	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
++		if (sp->mii_bus->phy_map[phy_addr]) {
++			phydev = sp->mii_bus->phy_map[phy_addr];
++			sp->phy = phy_addr;
++			break; /* break out with first one found */
++		}
++
++	if (!phydev) {
++		printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
++		return -1;
++	}
++
++	/* now we are supposed to have a proper phydev, to attach to... */
++	BUG_ON(!phydev);
++	BUG_ON(phydev->attached_dev);
++
++	phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
++		PHY_INTERFACE_MODE_MII);
++
++	if (IS_ERR(phydev)) {
++		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++		return PTR_ERR(phydev);
++	}
++
++	/* mask with MAC supported features */
++	phydev->supported &= (SUPPORTED_10baseT_Half
++		| SUPPORTED_10baseT_Full
++		| SUPPORTED_100baseT_Half
++		| SUPPORTED_100baseT_Full
++		| SUPPORTED_Autoneg
++		/* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
++		| SUPPORTED_MII
++		| SUPPORTED_TP);
++
++	phydev->advertising = phydev->supported;
++
++	sp->oldduplex = -1;
++	sp->phy_dev = phydev;
++
++	printk(KERN_INFO "%s: attached PHY driver [%s] "
++		"(mii_bus:phy_addr=%s)\n",
++		dev->name, phydev->drv->name, dev_name(&phydev->dev));
++
++	return 0;
++}
++
+--- /dev/null
++++ b/drivers/net/ar231x.h
+@@ -0,0 +1,302 @@
++/*
++ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef _AR2313_H_
++#define _AR2313_H_
++
++#include <generated/autoconf.h>
++#include <linux/bitops.h>
++#include <asm/bootinfo.h>
++#include <ar231x_platform.h>
++
++/*
++ * probe link timer - 5 secs
++ */
++#define LINK_TIMER    (5*HZ)
++
++#define IS_DMA_TX_INT(X)   (((X) & (DMA_STATUS_TI)) != 0)
++#define IS_DMA_RX_INT(X)   (((X) & (DMA_STATUS_RI)) != 0)
++#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN))    == 0)
++
++#define AR2313_TX_TIMEOUT (HZ/4)
++
++/*
++ * Rings
++ */
++#define DSC_RING_ENTRIES_SIZE	(AR2313_DESCR_ENTRIES * sizeof(struct desc))
++#define DSC_NEXT(idx)	        ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
++
++#define AR2313_MBGET		2
++#define AR2313_MBSET		3
++#define AR2313_PCI_RECONFIG	4
++#define AR2313_PCI_DUMP		5
++#define AR2313_TEST_PANIC	6
++#define AR2313_TEST_NULLPTR	7
++#define AR2313_READ_DATA	8
++#define AR2313_WRITE_DATA	9
++#define AR2313_GET_VERSION	10
++#define AR2313_TEST_HANG	11
++#define AR2313_SYNC		12
++
++#define DMA_RX_ERR_CRC		BIT(1)
++#define DMA_RX_ERR_DRIB		BIT(2)
++#define DMA_RX_ERR_MII		BIT(3)
++#define DMA_RX_EV2		BIT(5)
++#define DMA_RX_ERR_COL		BIT(6)
++#define DMA_RX_LONG		BIT(7)
++#define DMA_RX_LS		BIT(8)	/* last descriptor */
++#define DMA_RX_FS		BIT(9)	/* first descriptor */
++#define DMA_RX_MF		BIT(10)	/* multicast frame */
++#define DMA_RX_ERR_RUNT		BIT(11)	/* runt frame */
++#define DMA_RX_ERR_LENGTH	BIT(12)	/* length error */
++#define DMA_RX_ERR_DESC		BIT(14)	/* descriptor error */
++#define DMA_RX_ERROR		BIT(15)	/* error summary */
++#define DMA_RX_LEN_MASK		0x3fff0000
++#define DMA_RX_LEN_SHIFT	16
++#define DMA_RX_FILT		BIT(30)
++#define DMA_RX_OWN		BIT(31)	/* desc owned by DMA controller */
++
++#define DMA_RX1_BSIZE_MASK	0x000007ff
++#define DMA_RX1_BSIZE_SHIFT	0
++#define DMA_RX1_CHAINED		BIT(24)
++#define DMA_RX1_RER		BIT(25)
++
++#define DMA_TX_ERR_UNDER	BIT(1)	/* underflow error */
++#define DMA_TX_ERR_DEFER	BIT(2)	/* excessive deferral */
++#define DMA_TX_COL_MASK		0x78
++#define DMA_TX_COL_SHIFT	3
++#define DMA_TX_ERR_HB		BIT(7)	/* hearbeat failure */
++#define DMA_TX_ERR_COL		BIT(8)	/* excessive collisions */
++#define DMA_TX_ERR_LATE		BIT(9)	/* late collision */
++#define DMA_TX_ERR_LINK		BIT(10)	/* no carrier */
++#define DMA_TX_ERR_LOSS		BIT(11)	/* loss of carrier */
++#define DMA_TX_ERR_JABBER	BIT(14)	/* transmit jabber timeout */
++#define DMA_TX_ERROR		BIT(15)	/* frame aborted */
++#define DMA_TX_OWN		BIT(31)	/* descr owned by DMA controller */
++
++#define DMA_TX1_BSIZE_MASK	0x000007ff
++#define DMA_TX1_BSIZE_SHIFT	0
++#define DMA_TX1_CHAINED		BIT(24)	/* chained descriptors */
++#define DMA_TX1_TER		BIT(25)	/* transmit end of ring */
++#define DMA_TX1_FS		BIT(29)	/* first segment */
++#define DMA_TX1_LS		BIT(30)	/* last segment */
++#define DMA_TX1_IC		BIT(31)	/* interrupt on completion */
++
++#define RCVPKT_LENGTH(X)	(X  >> 16)	/* Received pkt Length */
++
++#define MAC_CONTROL_RE		BIT(2)	/* receive enable */
++#define MAC_CONTROL_TE		BIT(3)	/* transmit enable */
++#define MAC_CONTROL_DC		BIT(5)	/* Deferral check */
++#define MAC_CONTROL_ASTP	BIT(8)	/* Auto pad strip */
++#define MAC_CONTROL_DRTY	BIT(10)	/* Disable retry */
++#define MAC_CONTROL_DBF		BIT(11)	/* Disable bcast frames */
++#define MAC_CONTROL_LCC		BIT(12)	/* late collision ctrl */
++#define MAC_CONTROL_HP		BIT(13)	/* Hash Perfect filtering */
++#define MAC_CONTROL_HASH	BIT(14)	/* Unicast hash filtering */
++#define MAC_CONTROL_HO		BIT(15)	/* Hash only filtering */
++#define MAC_CONTROL_PB		BIT(16)	/* Pass Bad frames */
++#define MAC_CONTROL_IF		BIT(17)	/* Inverse filtering */
++#define MAC_CONTROL_PR		BIT(18)	/* promiscuous mode (valid frames only) */
++#define MAC_CONTROL_PM		BIT(19)	/* pass multicast */
++#define MAC_CONTROL_F		BIT(20)	/* full-duplex */
++#define MAC_CONTROL_DRO		BIT(23)	/* Disable Receive Own */
++#define MAC_CONTROL_HBD		BIT(28)	/* heart-beat disabled (MUST BE SET) */
++#define MAC_CONTROL_BLE		BIT(30)	/* big endian mode */
++#define MAC_CONTROL_RA		BIT(31)	/* receive all (valid and invalid frames) */
++
++#define MII_ADDR_BUSY		BIT(0)
++#define MII_ADDR_WRITE		BIT(1)
++#define MII_ADDR_REG_SHIFT	6
++#define MII_ADDR_PHY_SHIFT	11
++#define MII_DATA_SHIFT		0
++
++#define FLOW_CONTROL_FCE	BIT(1)
++
++#define DMA_BUS_MODE_SWR	BIT(0)	/* software reset */
++#define DMA_BUS_MODE_BLE	BIT(7)	/* big endian mode */
++#define DMA_BUS_MODE_PBL_SHIFT	8	/* programmable burst length 32 */
++#define DMA_BUS_MODE_DBO	BIT(20)	/* big-endian descriptors */
++
++#define DMA_STATUS_TI		BIT(0)	/* transmit interrupt */
++#define DMA_STATUS_TPS		BIT(1)	/* transmit process stopped */
++#define DMA_STATUS_TU		BIT(2)	/* transmit buffer unavailable */
++#define DMA_STATUS_TJT		BIT(3)	/* transmit buffer timeout */
++#define DMA_STATUS_UNF		BIT(5)	/* transmit underflow */
++#define DMA_STATUS_RI		BIT(6)	/* receive interrupt */
++#define DMA_STATUS_RU		BIT(7)	/* receive buffer unavailable */
++#define DMA_STATUS_RPS		BIT(8)	/* receive process stopped */
++#define DMA_STATUS_ETI		BIT(10)	/* early transmit interrupt */
++#define DMA_STATUS_FBE		BIT(13)	/* fatal bus interrupt */
++#define DMA_STATUS_ERI		BIT(14)	/* early receive interrupt */
++#define DMA_STATUS_AIS		BIT(15)	/* abnormal interrupt summary */
++#define DMA_STATUS_NIS		BIT(16)	/* normal interrupt summary */
++#define DMA_STATUS_RS_SHIFT	17	/* receive process state */
++#define DMA_STATUS_TS_SHIFT	20	/* transmit process state */
++#define DMA_STATUS_EB_SHIFT	23	/* error bits */
++
++#define DMA_CONTROL_SR		BIT(1)	/* start receive */
++#define DMA_CONTROL_ST		BIT(13)	/* start transmit */
++#define DMA_CONTROL_SF		BIT(21)	/* store and forward */
++
++
++typedef struct {
++	volatile unsigned int status;	// OWN, Device control and status.
++	volatile unsigned int devcs;	// pkt Control bits + Length
++	volatile unsigned int addr;	// Current Address.
++	volatile unsigned int descr;	// Next descriptor in chain.
++} ar231x_descr_t;
++
++
++
++//
++// New Combo structure for Both Eth0 AND eth1
++//
++typedef struct {
++	volatile unsigned int mac_control;	/* 0x00 */
++	volatile unsigned int mac_addr[2];	/* 0x04 - 0x08 */
++	volatile unsigned int mcast_table[2];	/* 0x0c - 0x10 */
++	volatile unsigned int mii_addr;	/* 0x14 */
++	volatile unsigned int mii_data;	/* 0x18 */
++	volatile unsigned int flow_control;	/* 0x1c */
++	volatile unsigned int vlan_tag;	/* 0x20 */
++	volatile unsigned int pad[7];	/* 0x24 - 0x3c */
++	volatile unsigned int ucast_table[8];	/* 0x40-0x5c */
++
++} ETHERNET_STRUCT;
++
++/********************************************************************
++ * Interrupt controller
++ ********************************************************************/
++
++typedef struct {
++	volatile unsigned int wdog_control;	/* 0x08 */
++	volatile unsigned int wdog_timer;	/* 0x0c */
++	volatile unsigned int misc_status;	/* 0x10 */
++	volatile unsigned int misc_mask;	/* 0x14 */
++	volatile unsigned int global_status;	/* 0x18 */
++	volatile unsigned int reserved;	/* 0x1c */
++	volatile unsigned int reset_control;	/* 0x20 */
++} INTERRUPT;
++
++/********************************************************************
++ * DMA controller
++ ********************************************************************/
++typedef struct {
++	volatile unsigned int bus_mode;	/* 0x00 (CSR0) */
++	volatile unsigned int xmt_poll;	/* 0x04 (CSR1) */
++	volatile unsigned int rcv_poll;	/* 0x08 (CSR2) */
++	volatile unsigned int rcv_base;	/* 0x0c (CSR3) */
++	volatile unsigned int xmt_base;	/* 0x10 (CSR4) */
++	volatile unsigned int status;	/* 0x14 (CSR5) */
++	volatile unsigned int control;	/* 0x18 (CSR6) */
++	volatile unsigned int intr_ena;	/* 0x1c (CSR7) */
++	volatile unsigned int rcv_missed;	/* 0x20 (CSR8) */
++	volatile unsigned int reserved[11];	/* 0x24-0x4c (CSR9-19) */
++	volatile unsigned int cur_tx_buf_addr;	/* 0x50 (CSR20) */
++	volatile unsigned int cur_rx_buf_addr;	/* 0x50 (CSR21) */
++} DMA;
++
++/*
++ * Struct private for the Sibyte.
++ *
++ * Elements are grouped so variables used by the tx handling goes
++ * together, and will go into the same cache lines etc. in order to
++ * avoid cache line contention between the rx and tx handling on SMP.
++ *
++ * Frequently accessed variables are put at the beginning of the
++ * struct to help the compiler generate better/shorter code.
++ */
++struct ar231x_private {
++	struct net_device *dev;
++	int version;
++	u32 mb[2];
++
++	volatile ETHERNET_STRUCT *phy_regs;
++	volatile ETHERNET_STRUCT *eth_regs;
++	volatile DMA *dma_regs;
++	volatile u32 *int_regs;
++	struct ar231x_eth *cfg;
++
++	spinlock_t lock;			/* Serialise access to device */
++
++	/*
++	 * RX and TX descriptors, must be adjacent
++	 */
++	ar231x_descr_t *rx_ring;
++	ar231x_descr_t *tx_ring;
++
++
++	struct sk_buff **rx_skb;
++	struct sk_buff **tx_skb;
++
++	/*
++	 * RX elements
++	 */
++	u32 rx_skbprd;
++	u32 cur_rx;
++
++	/*
++	 * TX elements
++	 */
++	u32 tx_prd;
++	u32 tx_csm;
++
++	/*
++	 * Misc elements
++	 */
++	char name[48];
++	struct {
++		u32 address;
++		u32 length;
++		char *mapping;
++	} desc;
++
++
++	struct timer_list link_timer;
++	unsigned short phy;			/* merlot phy = 1, samsung phy = 0x1f */
++	unsigned short mac;
++	unsigned short link;		/* 0 - link down, 1 - link up */
++	u16 phyData;
++
++	struct tasklet_struct rx_tasklet;
++	int unloading;
++
++	struct phy_device *phy_dev;
++	struct mii_bus *mii_bus;
++	int oldduplex;
++};
++
++
++/*
++ * Prototypes
++ */
++static int ar231x_init(struct net_device *dev);
++#ifdef TX_TIMEOUT
++static void ar231x_tx_timeout(struct net_device *dev);
++#endif
++static int ar231x_restart(struct net_device *dev);
++static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
++static int ar231x_open(struct net_device *dev);
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static int ar231x_close(struct net_device *dev);
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
++						int cmd);
++static void ar231x_init_cleanup(struct net_device *dev);
++static int ar231x_setup_timer(struct net_device *dev);
++static void ar231x_link_timer_fn(unsigned long data);
++static void ar231x_check_link(struct net_device *dev);
++#endif							/* _AR2313_H_ */