atheros: remove 2.6.28 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17593 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 661 deletions

diff --git a/target/linux/atheros/patches-2.6.28/120-spiflash.patch b/target/linux/atheros/patches-2.6.28/120-spiflash.patch
deleted file mode 100644
index e33733ecfb..0000000000
--- a/target/linux/atheros/patches-2.6.28/120-spiflash.patch
+++ /dev/null
@@ -1,661 +0,0 @@
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ
- 	help
- 	  This option enables FAST_READ access supported by ST M25Pxx.
- 
-+config MTD_AR2315
-+	tristate "Atheros AR2315+ SPI Flash support"
-+	depends on ATHEROS_AR2315
-+
- config MTD_SLRAM
- 	tristate "Uncached system RAM"
- 	help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
- obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
-+obj-$(CONFIG_MTD_AR2315)	+= ar2315.o
---- /dev/null
-+++ b/drivers/mtd/devices/ar2315.c
-@@ -0,0 +1,519 @@
-+
-+/*
-+ * MTD driver for the SPI Flash Memory support on Atheros AR2315
-+ *
-+ * Copyright (c) 2005-2006 Atheros Communications Inc.
-+ * Copyright (C) 2006-2007 FON Technology, SL.
-+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/squashfs_fs.h>
-+#include <linux/root_dev.h>
-+#include <linux/delay.h>
-+#include <asm/delay.h>
-+#include <asm/io.h>
-+
-+#include <ar2315_spiflash.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+
-+
-+#define SPIFLASH "spiflash: "
-+#define busy_wait(_priv, _condition, _wait) do { \
-+	while (_condition) { \
-+		spin_unlock_bh(&_priv->lock); \
-+		if (_wait > 1) \
-+			msleep(_wait); \
-+		else if ((_wait == 1) && need_resched()) \
-+			schedule(); \
-+		else \
-+			udelay(1); \
-+		spin_lock_bh(&_priv->lock); \
-+	} \
-+} while (0)
-+
-+enum {
-+	FLASH_NONE,
-+	FLASH_1MB,
-+	FLASH_2MB,
-+	FLASH_4MB,
-+	FLASH_8MB,
-+	FLASH_16MB,
-+};
-+
-+/* Flash configuration table */
-+struct flashconfig {
-+	u32 byte_cnt;
-+	u32 sector_cnt;
-+	u32 sector_size;
-+};
-+
-+const struct flashconfig flashconfig_tbl[] = {
-+	[FLASH_NONE] = { 0, 0, 0},
-+	[FLASH_1MB]  = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
-+	[FLASH_2MB]  = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
-+	[FLASH_4MB]  = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
-+	[FLASH_8MB]  = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
-+	[FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
-+};
-+
-+/* Mapping of generic opcodes to STM serial flash opcodes */
-+enum {
-+	SPI_WRITE_ENABLE,
-+	SPI_WRITE_DISABLE,
-+	SPI_RD_STATUS,
-+	SPI_WR_STATUS,
-+	SPI_RD_DATA,
-+	SPI_FAST_RD_DATA,
-+	SPI_PAGE_PROGRAM,
-+	SPI_SECTOR_ERASE,
-+	SPI_BULK_ERASE,
-+	SPI_DEEP_PWRDOWN,
-+	SPI_RD_SIG,
-+};
-+
-+struct opcodes {
-+    __u16 code;
-+    __s8 tx_cnt;
-+    __s8 rx_cnt;
-+};
-+const struct opcodes stm_opcodes[] = {
-+	[SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
-+	[SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
-+	[SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
-+	[SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
-+	[SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
-+	[SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
-+	[SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
-+	[SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
-+	[SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
-+	[SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
-+	[SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
-+};
-+
-+/* Driver private data structure */
-+struct spiflash_priv {
-+	struct mtd_info mtd;
-+	void *readaddr; /* memory mapped data for read  */
-+	void *mmraddr;  /* memory mapped register space */
-+	wait_queue_head_t wq;
-+	spinlock_t lock;
-+	int state;
-+};
-+
-+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
-+
-+enum {
-+	FL_READY,
-+	FL_READING,
-+	FL_ERASING,
-+	FL_WRITING
-+};
-+
-+/***************************************************************************************************/
-+
-+static u32
-+spiflash_read_reg(struct spiflash_priv *priv, int reg)
-+{
-+	return ar231x_read_reg((u32) priv->mmraddr + reg);
-+}
-+
-+static void
-+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
-+{
-+	ar231x_write_reg((u32) priv->mmraddr + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_busy(struct spiflash_priv *priv)
-+{
-+	u32 reg;
-+
-+	busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
-+		SPI_CTL_BUSY, 0);
-+	return reg;
-+}
-+
-+static u32
-+spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
-+{
-+	const struct opcodes *op;
-+	u32 reg, mask;
-+
-+	op = &stm_opcodes[opcode];
-+	reg = spiflash_wait_busy(priv);
-+	spiflash_write_reg(priv, SPI_FLASH_OPCODE,
-+		((u32) op->code) | (addr << 8));
-+
-+	reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+	reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
-+
-+	spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+	spiflash_wait_busy(priv);
-+
-+	if (!op->rx_cnt)
-+		return 0;
-+
-+	reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
-+
-+	switch (op->rx_cnt) {
-+	case 1:
-+		mask = 0x000000ff;
-+		break;
-+	case 2:
-+		mask = 0x0000ffff;
-+		break;
-+	case 3:
-+		mask = 0x00ffffff;
-+		break;
-+	default:
-+		mask = 0xffffffff;
-+		break;
-+	}
-+	reg &= mask;
-+
-+	return reg;
-+}
-+
-+
-+/*
-+ * Probe SPI flash device
-+ * Function returns 0 for failure.
-+ * and flashconfig_tbl array index for success.
-+ */
-+static int
-+spiflash_probe_chip (struct spiflash_priv *priv)
-+{
-+	u32 sig;
-+	int flash_size;
-+
-+	/* Read the signature on the flash device */
-+	spin_lock_bh(&priv->lock);
-+	sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
-+	spin_unlock_bh(&priv->lock);
-+
-+	switch (sig) {
-+	case STM_8MBIT_SIGNATURE:
-+		flash_size = FLASH_1MB;
-+		break;
-+	case STM_16MBIT_SIGNATURE:
-+		flash_size = FLASH_2MB;
-+		break;
-+	case STM_32MBIT_SIGNATURE:
-+		flash_size = FLASH_4MB;
-+		break;
-+	case STM_64MBIT_SIGNATURE:
-+		flash_size = FLASH_8MB;
-+		break;
-+	case STM_128MBIT_SIGNATURE:
-+		flash_size = FLASH_16MB;
-+		break;
-+	default:
-+		printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
-+		return 0;
-+	}
-+
-+	return flash_size;
-+}
-+
-+
-+/* wait until the flash chip is ready and grab a lock */
-+static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
-+{
-+	DECLARE_WAITQUEUE(wait, current);
-+
-+retry:
-+	spin_lock_bh(&priv->lock);
-+	if (priv->state != FL_READY) {
-+		set_current_state(TASK_UNINTERRUPTIBLE);
-+		add_wait_queue(&priv->wq, &wait);
-+		spin_unlock_bh(&priv->lock);
-+		schedule();
-+		remove_wait_queue(&priv->wq, &wait);
-+
-+		if(signal_pending(current))
-+			return 0;
-+
-+		goto retry;
-+	}
-+	priv->state = state;
-+
-+	return 1;
-+}
-+
-+static inline void spiflash_done(struct spiflash_priv *priv)
-+{
-+	priv->state = FL_READY;
-+	spin_unlock_bh(&priv->lock);
-+	wake_up(&priv->wq);
-+}
-+
-+static void
-+spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
-+{
-+	busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
-+		SPI_STATUS_WIP, timeout);
-+	spiflash_done(priv);
-+}
-+
-+
-+
-+static int
-+spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct spiflash_priv *priv = to_spiflash(mtd);
-+	const struct opcodes *op;
-+	u32 temp, reg;
-+
-+	if (instr->addr + instr->len > mtd->size)
-+		return -EINVAL;
-+
-+	if (!spiflash_wait_ready(priv, FL_ERASING))
-+		return -EINTR;
-+
-+	spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+	reg = spiflash_wait_busy(priv);
-+
-+	op = &stm_opcodes[SPI_SECTOR_ERASE];
-+	temp = ((u32)instr->addr << 8) | (u32)(op->code);
-+	spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
-+
-+	reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+	reg |= op->tx_cnt | SPI_CTL_START;
-+	spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+	spiflash_wait_complete(priv, 20);
-+
-+	instr->state = MTD_ERASE_DONE;
-+	if (instr->callback)
-+		instr->callback(instr);
-+
-+	return 0;
-+}
-+
-+static int
-+spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+	struct spiflash_priv *priv = to_spiflash(mtd);
-+	u8 *read_addr;
-+
-+	if (!len)
-+		return 0;
-+
-+	if (from + len > mtd->size)
-+		return -EINVAL;
-+
-+	*retlen = len;
-+
-+	if (!spiflash_wait_ready(priv, FL_READING))
-+		return -EINTR;
-+
-+	read_addr = (u8 *)(priv->readaddr + from);
-+	memcpy_fromio(buf, read_addr, len);
-+	spiflash_done(priv);
-+
-+	return 0;
-+}
-+
-+static int
-+spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
-+{
-+	struct spiflash_priv *priv = to_spiflash(mtd);
-+	u32 opcode, bytes_left;
-+
-+	*retlen = 0;
-+
-+	if (!len)
-+		return 0;
-+
-+	if (to + len > mtd->size)
-+		return -EINVAL;
-+
-+	bytes_left = len;
-+
-+	do {
-+		u32 read_len, reg, page_offset, spi_data = 0;
-+
-+		read_len = min(bytes_left, sizeof(u32));
-+
-+		/* 32-bit writes cannot span across a page boundary
-+		 * (256 bytes). This types of writes require two page
-+		 * program operations to handle it correctly. The STM part
-+		 * will write the overflow data to the beginning of the
-+		 * current page as opposed to the subsequent page.
-+		 */
-+		page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
-+
-+		if (page_offset > STM_PAGE_SIZE)
-+			read_len -= (page_offset - STM_PAGE_SIZE);
-+
-+		if (!spiflash_wait_ready(priv, FL_WRITING))
-+			return -EINTR;
-+
-+		spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+		spi_data = 0;
-+		switch (read_len) {
-+		case 4:
-+			spi_data |= buf[3] << 24;
-+			/* fall through */
-+		case 3:
-+			spi_data |= buf[2] << 16;
-+			/* fall through */
-+		case 2:
-+			spi_data |= buf[1] << 8;
-+			/* fall through */
-+		case 1:
-+			spi_data |= buf[0] & 0xff;
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
-+		opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
-+			(to & 0x00ffffff) << 8;
-+		spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
-+
-+		reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
-+		reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+		reg |= (read_len + 4) | SPI_CTL_START;
-+		spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+		spiflash_wait_complete(priv, 1);
-+
-+		bytes_left -= read_len;
-+		to += read_len;
-+		buf += read_len;
-+
-+		*retlen += read_len;
-+	} while (bytes_left != 0);
-+
-+	return 0;
-+}
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
-+#endif
-+
-+
-+static int
-+spiflash_probe(struct platform_device *pdev)
-+{
-+	struct spiflash_priv *priv;
-+	struct mtd_partition *parts;
-+	struct mtd_info *mtd;
-+	int index, num_parts;
-+	int result = 0;
-+
-+	priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
-+	spin_lock_init(&priv->lock);
-+	init_waitqueue_head(&priv->wq);
-+	priv->state = FL_READY;
-+	mtd = &priv->mtd;
-+
-+	priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-+	if (!priv->mmraddr) {
-+		printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+		goto error;
-+	}
-+
-+	index = spiflash_probe_chip(priv);
-+	if (!index) {
-+		printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
-+		goto error;
-+	}
-+
-+	priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-+	if (!priv->readaddr) {
-+		printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+		goto error;
-+	}
-+
-+	platform_set_drvdata(pdev, priv);
-+	mtd->name = "spiflash";
-+	mtd->type = MTD_NORFLASH;
-+	mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-+	mtd->size = flashconfig_tbl[index].byte_cnt;
-+	mtd->erasesize = flashconfig_tbl[index].sector_size;
-+	mtd->writesize = 1;
-+	mtd->numeraseregions = 0;
-+	mtd->eraseregions = NULL;
-+	mtd->erase = spiflash_erase;
-+	mtd->read = spiflash_read;
-+	mtd->write = spiflash_write;
-+	mtd->owner = THIS_MODULE;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+	/* parse redboot partitions */
-+	num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
-+	if (!num_parts)
-+		goto error;
-+
-+	result = add_mtd_partitions(mtd, parts, num_parts);
-+#endif
-+
-+	return result;
-+
-+error:
-+	if (priv->mmraddr)
-+		iounmap(priv->mmraddr);
-+	kfree(priv);
-+	return -ENXIO;
-+}
-+
-+static int
-+spiflash_remove (struct platform_device *pdev)
-+{
-+	struct spiflash_priv *priv = platform_get_drvdata(pdev);
-+	struct mtd_info *mtd = &priv->mtd;
-+
-+	del_mtd_partitions(mtd);
-+	iounmap(priv->mmraddr);
-+	iounmap(priv->readaddr);
-+	kfree(priv);
-+
-+	return 0;
-+}
-+
-+struct platform_driver spiflash_driver = {
-+	.driver.name = "spiflash",
-+	.probe = spiflash_probe,
-+	.remove = spiflash_remove,
-+};
-+
-+int __init
-+spiflash_init (void)
-+{
-+	return platform_driver_register(&spiflash_driver);
-+}
-+
-+void __exit
-+spiflash_exit (void)
-+{
-+	return platform_driver_unregister(&spiflash_driver);
-+}
-+
-+module_init (spiflash_init);
-+module_exit (spiflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
-+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
-@@ -0,0 +1,116 @@
-+/*
-+ * SPI Flash Memory support header file.
-+ *
-+ * Copyright (c) 2005, Atheros Communications Inc.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __AR2315_SPIFLASH_H
-+#define __AR2315_SPIFLASH_H
-+
-+#define STM_PAGE_SIZE           256
-+
-+#define SFI_WRITE_BUFFER_SIZE   4
-+#define SFI_FLASH_ADDR_MASK     0x00ffffff
-+
-+#define STM_8MBIT_SIGNATURE     0x13
-+#define STM_M25P80_BYTE_COUNT   1048576
-+#define STM_M25P80_SECTOR_COUNT 16
-+#define STM_M25P80_SECTOR_SIZE  0x10000
-+
-+#define STM_16MBIT_SIGNATURE    0x14
-+#define STM_M25P16_BYTE_COUNT   2097152
-+#define STM_M25P16_SECTOR_COUNT 32
-+#define STM_M25P16_SECTOR_SIZE  0x10000
-+
-+#define STM_32MBIT_SIGNATURE    0x15
-+#define STM_M25P32_BYTE_COUNT   4194304
-+#define STM_M25P32_SECTOR_COUNT 64
-+#define STM_M25P32_SECTOR_SIZE  0x10000
-+
-+#define STM_64MBIT_SIGNATURE    0x16
-+#define STM_M25P64_BYTE_COUNT   8388608
-+#define STM_M25P64_SECTOR_COUNT 128
-+#define STM_M25P64_SECTOR_SIZE  0x10000
-+
-+#define STM_128MBIT_SIGNATURE   0x17
-+#define STM_M25P128_BYTE_COUNT   16777216
-+#define STM_M25P128_SECTOR_COUNT 256
-+#define STM_M25P128_SECTOR_SIZE  0x10000
-+
-+#define STM_1MB_BYTE_COUNT   STM_M25P80_BYTE_COUNT
-+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-+#define STM_1MB_SECTOR_SIZE  STM_M25P80_SECTOR_SIZE
-+#define STM_2MB_BYTE_COUNT   STM_M25P16_BYTE_COUNT
-+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-+#define STM_2MB_SECTOR_SIZE  STM_M25P16_SECTOR_SIZE
-+#define STM_4MB_BYTE_COUNT   STM_M25P32_BYTE_COUNT
-+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-+#define STM_4MB_SECTOR_SIZE  STM_M25P32_SECTOR_SIZE
-+#define STM_8MB_BYTE_COUNT   STM_M25P64_BYTE_COUNT
-+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-+#define STM_8MB_SECTOR_SIZE  STM_M25P64_SECTOR_SIZE
-+#define STM_16MB_BYTE_COUNT   STM_M25P128_BYTE_COUNT
-+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
-+#define STM_16MB_SECTOR_SIZE  STM_M25P128_SECTOR_SIZE
-+
-+/*
-+ * ST Microelectronics Opcodes for Serial Flash
-+ */
-+
-+#define STM_OP_WR_ENABLE       0x06     /* Write Enable */
-+#define STM_OP_WR_DISABLE      0x04     /* Write Disable */
-+#define STM_OP_RD_STATUS       0x05     /* Read Status */
-+#define STM_OP_WR_STATUS       0x01     /* Write Status */
-+#define STM_OP_RD_DATA         0x03     /* Read Data */
-+#define STM_OP_FAST_RD_DATA    0x0b     /* Fast Read Data */
-+#define STM_OP_PAGE_PGRM       0x02     /* Page Program */
-+#define STM_OP_SECTOR_ERASE    0xd8     /* Sector Erase */
-+#define STM_OP_BULK_ERASE      0xc7     /* Bulk Erase */
-+#define STM_OP_DEEP_PWRDOWN    0xb9     /* Deep Power-Down Mode */
-+#define STM_OP_RD_SIG          0xab     /* Read Electronic Signature */
-+
-+#define STM_STATUS_WIP       0x01       /* Write-In-Progress */
-+#define STM_STATUS_WEL       0x02       /* Write Enable Latch */
-+#define STM_STATUS_BP0       0x04       /* Block Protect 0 */
-+#define STM_STATUS_BP1       0x08       /* Block Protect 1 */
-+#define STM_STATUS_BP2       0x10       /* Block Protect 2 */
-+#define STM_STATUS_SRWD      0x80       /* Status Register Write Disable */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+#define AR531XPLUS_SPI_READ     0x08000000
-+#define AR531XPLUS_SPI_MMR      0x11300000
-+#define AR531XPLUS_SPI_MMR_SIZE 12
-+
-+#define AR531XPLUS_SPI_CTL      0x00
-+#define AR531XPLUS_SPI_OPCODE   0x04
-+#define AR531XPLUS_SPI_DATA     0x08
-+
-+#define SPI_FLASH_READ          AR531XPLUS_SPI_READ
-+#define SPI_FLASH_MMR           AR531XPLUS_SPI_MMR
-+#define SPI_FLASH_MMR_SIZE      AR531XPLUS_SPI_MMR_SIZE
-+#define SPI_FLASH_CTL           AR531XPLUS_SPI_CTL
-+#define SPI_FLASH_OPCODE        AR531XPLUS_SPI_OPCODE
-+#define SPI_FLASH_DATA          AR531XPLUS_SPI_DATA
-+
-+#define SPI_CTL_START           0x00000100
-+#define SPI_CTL_BUSY            0x00010000
-+#define SPI_CTL_TXCNT_MASK      0x0000000f
-+#define SPI_CTL_RXCNT_MASK      0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
-+#define SPI_CTL_SIZE_MASK       0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK    0x03000000
-+#define SPI_OPCODE_MASK         0x000000ff
-+
-+#define SPI_STATUS_WIP		STM_STATUS_WIP
-+
-+#endif