diff options
| author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-08-31 20:13:47 +0000 |
|---|---|---|
| committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-08-31 20:13:47 +0000 |
| commit | d1f333874d4c4ff3f4a27ec3eb08d3f7ca6d8e43 (patch) | |
| tree | c66acc497fee281492a4775a34cf0c3c7434a70b /target/linux/ar71xx/patches-2.6.35/153-spi-rb4xx-cpld-driver.patch | |
| parent | c433567bd3abf153f116b01fec22538a3c9d7fe7 (diff) | |
ar71xx: rewrite SPI drivers for the RB4xx boards
* add a new SPI controller driver
* add SPI driver for the CPLD chip
* convert the NAND driver
* enable the mikroSD slot
* enable more LEDs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22863 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ar71xx/patches-2.6.35/153-spi-rb4xx-cpld-driver.patch')
| -rw-r--r-- | target/linux/ar71xx/patches-2.6.35/153-spi-rb4xx-cpld-driver.patch | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/target/linux/ar71xx/patches-2.6.35/153-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-2.6.35/153-spi-rb4xx-cpld-driver.patch new file mode 100644 index 0000000000..435effdfec --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.35/153-spi-rb4xx-cpld-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -401,6 +401,13 @@ config SPI_TLE62X0 + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on AR71XX_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -58,6 +58,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o + obj-$(CONFIG_SPI_SPIDEV) += spidev.o + obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o + # ... add above this line ... |