ar71xx: add kernel support for dir-825-c1

[juhosg:
 - remove unused GPIO stuff
 - use a separate kernel patch for machine integration]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35401 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 189 insertions, 0 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
new file mode 100644
index 0000000000..4d140bbfc4
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
@@ -0,0 +1,189 @@
+/*
+ *  D-Link DIR-825 rev. C1 board support
+ *
+ *  Copyright (C) 2013 Alexander Stadler
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DIR825C1_GPIO_LED_BLUE_USB		11
+#define DIR825C1_GPIO_LED_ORANGE_POWER		15
+#define DIR825C1_GPIO_LED_BLUE_POWER		14
+#define DIR825C1_GPIO_LED_ORANGE_PLANET		19
+#define DIR825C1_GPIO_LED_BLUE_PLANET		18
+
+#define DIR825C1_GPIO_BTN_RESET			17
+#define DIR825C1_GPIO_BTN_WPS			16
+
+
+#define DIR825C1_KEYS_POLL_INTERVAL	20	/* msecs */
+#define DIR825C1_KEYS_DEBOUNCE_INTERVAL	(3 * DIR825C1_KEYS_POLL_INTERVAL)
+
+#define DIR825C1_MAC0_OFFSET             0x4
+#define DIR825C1_MAC1_OFFSET             0x18
+#define DIR825C1_WMAC_CALDATA_OFFSET     0x1000
+#define DIR825C1_PCIE_CALDATA_OFFSET     0x5000
+
+static struct gpio_led dir825c1_leds_gpio[] __initdata = {
+	{
+		.name		= "d-link:blue:usb",
+		.gpio		= DIR825C1_GPIO_LED_BLUE_USB,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:orange:power",
+		.gpio		= DIR825C1_GPIO_LED_ORANGE_POWER,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:blue:power",
+		.gpio		= DIR825C1_GPIO_LED_BLUE_POWER,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:orange:planet",
+		.gpio		= DIR825C1_GPIO_LED_ORANGE_PLANET,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:blue:planet",
+		.gpio		= DIR825C1_GPIO_LED_BLUE_PLANET,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DIR825C1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DIR825C1_GPIO_BTN_WPS,
+		.active_low	= 1,
+	}
+};
+
+static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = {
+	.mode = AR8327_PAD_MAC_RGMII,
+	.txclk_delay_en = true,
+	.rxclk_delay_en = true,
+	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = {
+	.led_ctrl0 = 0xc737c737,
+	.led_ctrl1 = 0x00000000,
+	.led_ctrl2 = 0x00000000,
+	.led_ctrl3 = 0x0030c300,
+	.open_drain = false,
+};
+
+static struct ar8327_platform_data dir825c1_ar8327_data = {
+	.pad0_cfg = &dir825c1_ar8327_pad0_cfg,
+	.port0_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 1,
+		.rxpause = 1,
+	},
+	.led_cfg = &dir825c1_ar8327_led_cfg,
+};
+
+static struct mdio_board_info dir825c1_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 0,
+		.platform_data = &dir825c1_ar8327_data,
+	},
+};
+
+static void dir825c1_read_ascii_mac(u8 *dest, u8 *src)
+{
+	int ret;
+
+	ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+	             &dest[0], &dest[1], &dest[2],
+	             &dest[3], &dest[4], &dest[5]);
+
+	if (ret != ETH_ALEN)
+		memset(dest, 0, ETH_ALEN);
+}
+
+static void __init dir825c1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+	u8 tmpmac[ETH_ALEN];
+	u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
+
+	dir825c1_read_ascii_mac(mac1, mac + DIR825C1_MAC0_OFFSET);
+	dir825c1_read_ascii_mac(mac2, mac + DIR825C1_MAC1_OFFSET);
+
+	ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB, AR934X_GPIO_OUT_GPIO);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
+				 dir825c1_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(dir825c1_gpio_keys),
+					dir825c1_gpio_keys);
+
+	ap9x_pci_setup_wmac_led_pin(0, 13);
+	ap9x_pci_setup_wmac_led_pin(1, 32);
+
+	ath79_init_mac(tmpmac, mac1, 0);
+	ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, tmpmac);
+
+	ath79_init_mac(tmpmac, mac2, 0);
+	ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, tmpmac);
+
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+	mdiobus_register_board_info(dir825c1_mdio0_info,
+				    ARRAY_SIZE(dir825c1_mdio0_info));
+
+	ath79_register_mdio(0, 0x0);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+
+	/* GMAC0 is connected to an AR8327N switch */
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.phy_mask = BIT(0);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+	ath79_eth0_pll_data.pll_1000 = 0x06000000;
+	ath79_register_eth(0);
+
+	ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1",
+	     "D-Link DIR-825 rev. C1",
+	     dir825c1_setup);