ar71xx: add support for the WNDR3700v2 board

Based on a patch by Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 83 insertions, 3 deletions

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network
new file mode 100644
index 0000000000..d05fdf3425
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network
@@ -0,0 +1,69 @@
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0.1
+	option type	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+config interface wan
+	option ifname	eth1
+	option proto	dhcp
+
+config switch
+	option name	rtl8366s
+	option reset	1
+	option enable_vlan 1
+	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+	option blinkrate	2
+
+config switch_vlan
+	option device	rtl8366s
+	option vlan 	1
+	option ports	"0 1 2 3 5t"
+
+config switch_port
+	# Port 1 controls the GREEN configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+	# 14: Link (master); 15: separate register
+
+	option device		rtl8366s
+	option port		1
+	option led		6
+
+config switch_port
+	# Port 2 controls the ORANGE configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	
+	option device		rtl8366s
+	option port		2
+	option led		9
+
+config switch_port                                              
+	# Port 5 controls the configuration of the WAN LED and the
+	# section does not correspond to a real switch port.
+	#
+	# To toggle the use of green or orange LEDs for the WAN port,
+	# see the LED setting for wndr3700:green:wan in /etc/config/system.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+
+	option device		rtl8366s
+	option port		5
+	option led		2
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 23370446ab..dd47cf33bb 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -105,7 +105,7 @@ get_status_led() {
 	unifi)
 		status_led="ubnt:green:dome"
 		;;
-	wndr3700)
+	wndr3700 | wndr3700v2)
 		status_led="wndr3700:green:power"
 		;;
 	wnr2000)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 b/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700
index a893a0ec1d..77fd057383 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700
@@ -23,6 +23,6 @@ commit system
 EOF
 }
 
-if [ "${board}" == "wndr3700" ]; then
+if [ "${board}" == "wndr3700" -o "${board}" == "wndr3700v2" ]; then
 	wndr3700_set_wan_led
 fi
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index c08860542e..d390f9fdff 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -130,6 +130,9 @@ ar71xx_board_name() {
 	*WNDR3700)
 		name="wndr3700"
 		;;
+	*WNDR3700v2)
+		name="wndr3700v2"
+		;;
 	*WNR2000)
 		name="wnr2000"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 0b867c0052..067fe033fa 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -64,6 +64,7 @@ platform_do_upgrade_combined() {
 platform_check_image() {
 	local board=$(ar71xx_board_name)
 	local magic="$(get_magic_word "$1")"
+	local magic_long="$(get_magic_long "$1")"
 
 	[ "$ARGC" -gt 1 ] && return 1
 
@@ -83,7 +84,14 @@ platform_check_image() {
 		return 0
 		;;
 	wndr3700)
-		[ "$magic" != "3337" ] && {
+		[ "$magic_long" != "33373030" ] && {
+			echo "Invalid image type."
+			return 1
+		}
+		return 0
+		;;
+	wndr3700v2)
+		[ "$magic_long" != "33373031" ] && {
 			echo "Invalid image type."
 			return 1
 		}