diff options
| author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-01-26 20:35:42 +0000 |
|---|---|---|
| committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-01-26 20:35:42 +0000 |
| commit | 9e07cb05fa87936116d72d4fafe2a27d84e65f37 (patch) | |
| tree | a84f71b2d781bde43062f55eb941c36cd461b02f /target/linux/ar71xx/base-files/etc | |
| parent | 0dbc0d2a8dc1c28cc08238c7ad5a0202ebd87d66 (diff) | |
ar71xx: add support for the WNDR3700v2 board
Based on a patch by Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ar71xx/base-files/etc')
| -rw-r--r-- | target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network | 69 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/diag.sh | 2 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 | 2 |
3 files changed, 71 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network new file mode 100644 index 0000000000..d05fdf3425 --- /dev/null +++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network @@ -0,0 +1,69 @@ +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0.1 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + +config interface wan + option ifname eth1 + option proto dhcp + +config switch + option name rtl8366s + option reset 1 + option enable_vlan 1 + # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms + option blinkrate 2 + +config switch_vlan + option device rtl8366s + option vlan 1 + option ports "0 1 2 3 5t" + +config switch_port + # Port 1 controls the GREEN configuration of LEDs for + # the switch and the section does not correspond to a real + # switch port. + # + # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; + # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; + # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; + # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); + # 14: Link (master); 15: separate register + + option device rtl8366s + option port 1 + option led 6 + +config switch_port + # Port 2 controls the ORANGE configuration of LEDs for + # the switch and the section does not correspond to a real + # switch port. + # + # See the key above for switch port 1 for the meaning of the + # 'led' setting below. + + option device rtl8366s + option port 2 + option led 9 + +config switch_port + # Port 5 controls the configuration of the WAN LED and the + # section does not correspond to a real switch port. + # + # To toggle the use of green or orange LEDs for the WAN port, + # see the LED setting for wndr3700:green:wan in /etc/config/system. + # + # See the key above for switch port 1 for the meaning of the + # 'led' setting below. + + option device rtl8366s + option port 5 + option led 2 diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 23370446ab..dd47cf33bb 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -105,7 +105,7 @@ get_status_led() { unifi) status_led="ubnt:green:dome" ;; - wndr3700) + wndr3700 | wndr3700v2) status_led="wndr3700:green:power" ;; wnr2000) diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 b/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 index a893a0ec1d..77fd057383 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 @@ -23,6 +23,6 @@ commit system EOF } -if [ "${board}" == "wndr3700" ]; then +if [ "${board}" == "wndr3700" -o "${board}" == "wndr3700v2" ]; then wndr3700_set_wan_led fi |