[adm8668] remove the "old" tulip forked driver

We can now use the mainline tulip driver.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34559 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 0 insertions, 1341 deletions

diff --git a/target/linux/adm8668/files/arch/mips/adm8668/net.h b/target/linux/adm8668/files/arch/mips/adm8668/net.h
deleted file mode 100644
index c7aef8cf6e..0000000000
--- a/target/linux/adm8668/files/arch/mips/adm8668/net.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * originally drivers/net/tulip/tulip.h
- *   Copyright 2000,2001  The Linux Kernel Team
- *   Written/copyright 1994-2001 by Donald Becker.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __NET_TULIP_H__
-#define __NET_TULIP_H__
-
-#include <linux/module.h>
-#include <linux/export.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/mii.h>
-#include <linux/crc32.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <asm/unaligned.h>
-#include <asm/uaccess.h>
-
-/* undefine, or define to various debugging levels (>4 == obscene levels) */
-#define TULIP_DEBUG 1
-#define	VALID_INTR	0x0001a451
-#define	ADM8668_WAN_IRQ		8
-#define	ADM8668_LAN_IRQ		7
-#define	ADM8668_WAN_MACADDR	0xb00205ac
-#define	ADM8668_LAN_MACADDR	0xb0020404
-
-/* Offsets to the Command and Status Registers, "CSRs".  All accesses
-   must be longword instructions and quadword aligned. */
-enum tulip_offsets {
-	CSR0 = 0,
-	CSR1 = 0x08,
-	CSR2 = 0x10,
-	CSR3 = 0x18,
-	CSR4 = 0x20,
-	CSR5 = 0x28,
-	CSR6 = 0x30,
-	CSR7 = 0x38,
-	CSR8 = 0x40,
-	CSR9 = 0x48,
-	CSR10 = 0x50,
-	CSR11 = 0x58,
-	CSR12 = 0x60,
-	CSR13 = 0x68,
-	CSR14 = 0x70,
-	CSR15 = 0x78,
-	CSR18 = 0x88,
-	CSR19 = 0x8c,
-	CSR20 = 0x90,
-	CSR27 = 0xAC,
-	CSR28 = 0xB0,
-};
-
-#define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber)
-
-/* The bits in the CSR5 status registers, mostly interrupt sources. */
-enum status_bits {
-	TimerInt = 0x800,
-	SystemError = 0x2000,
-	TPLnkFail = 0x1000,
-	TPLnkPass = 0x10,
-	NormalIntr = 0x10000,
-	AbnormalIntr = 0x8000,
-	RxJabber = 0x200,
-	RxDied = 0x100,
-	RxNoBuf = 0x80,
-	RxIntr = 0x40,
-	TxFIFOUnderflow = 0x20,
-	RxErrIntr = 0x10,
-	TxJabber = 0x08,
-	TxNoBuf = 0x04,
-	TxDied = 0x02,
-	TxIntr = 0x01,
-};
-
-/* bit mask for CSR5 TX/RX process state */
-#define CSR5_TS	0x00700000
-#define CSR5_RS	0x000e0000
-
-enum tulip_mode_bits {
-	TxThreshold		= (1 << 22),
-	FullDuplex		= (1 << 9),
-	TxOn			= 0x2000,
-	AcceptBroadcast		= 0x0100,
-	AcceptAllMulticast	= 0x0080,
-	AcceptAllPhys		= 0x0040,
-	AcceptRunt		= 0x0008,
-	RxOn			= 0x0002,
-	RxTx			= (TxOn | RxOn),
-};
-
-/* The Tulip Rx and Tx buffer descriptors. */
-struct tulip_rx_desc {
-	__le32 status;
-	__le32 length;
-	__le32 buffer1;
-	__le32 buffer2;
-};
-
-struct tulip_tx_desc {
-	__le32 status;
-	__le32 length;
-	__le32 buffer1;
-	__le32 buffer2;		/* We use only buffer 1.  */
-};
-
-enum desc_status_bits {
-	DescOwned    = 0x80000000,
-	DescWholePkt = 0x60000000,
-	DescEndPkt   = 0x40000000,
-	DescStartPkt = 0x20000000,
-	DescEndRing  = 0x02000000,
-	DescUseLink  = 0x01000000,
-
-	/*
-	 * Error summary flag is logical or of 'CRC Error', 'Collision Seen',
-	 * 'Frame Too Long', 'Runt' and 'Descriptor Error' flags generated
-	 * within tulip chip.
-	 */
-	RxDescErrorSummary = 0x8000,
-	RxDescCRCError = 0x0002,
-	RxDescCollisionSeen = 0x0040,
-
-	/*
-	 * 'Frame Too Long' flag is set if packet length including CRC exceeds
-	 * 1518.  However, a full sized VLAN tagged frame is 1522 bytes
-	 * including CRC.
-	 *
-	 * The tulip chip does not block oversized frames, and if this flag is
-	 * set on a receive descriptor it does not indicate the frame has been
-	 * truncated.  The receive descriptor also includes the actual length.
-	 * Therefore we can safety ignore this flag and check the length
-	 * ourselves.
-	 */
-	RxDescFrameTooLong = 0x0080,
-	RxDescRunt = 0x0800,
-	RxDescDescErr = 0x4000,
-	RxWholePkt   = 0x00000300,
-	/*
-	 * Top three bits of 14 bit frame length (status bits 27-29) should
-	 * never be set as that would make frame over 2047 bytes. The Receive
-	 * Watchdog flag (bit 4) may indicate the length is over 2048 and the
-	 * length field is invalid.
-	 */
-	RxLengthOver2047 = 0x38000010
-};
-
-/* Keep the ring sizes a power of two for efficiency.
-   Making the Tx ring too large decreases the effectiveness of channel
-   bonding and packet priority.
-   There are no ill effects from too-large receive rings. */
-
-#define TX_RING_SIZE	32
-#define RX_RING_SIZE	128
-
-/* The receiver on the DC21143 rev 65 can fail to close the last
- * receive descriptor in certain circumstances (see errata) when
- * using MWI. This can only occur if the receive buffer ends on
- * a cache line boundary, so the "+ 4" below ensures it doesn't.
- */
-#define PKT_BUF_SZ	(1536 + 4)	/* Size of each temporary Rx buffer. */
-
-/* Ring-wrap flag in length field, use for last ring entry.
-	0x01000000 means chain on buffer2 address,
-	0x02000000 means use the ring start address in CSR2/3.
-   Note: Some work-alike chips do not function correctly in chained mode.
-   The ASIX chip works only in chained mode.
-   Thus we indicates ring mode, but always write the 'next' field for
-   chained mode as well.
-*/
-#define DESC_RING_WRAP 0x02000000
-
-struct ring_info {
-	struct sk_buff	*skb;
-	dma_addr_t	mapping;
-};
-
-struct tulip_private {
-	struct tulip_rx_desc *rx_ring;
-	struct tulip_tx_desc *tx_ring;
-	dma_addr_t rx_ring_dma;
-	dma_addr_t tx_ring_dma;
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct ring_info tx_buffers[TX_RING_SIZE];
-	/* The addresses of receive-in-place skbuffs. */
-	struct ring_info rx_buffers[RX_RING_SIZE];
-	struct napi_struct napi;
-	struct net_device_stats stats;
-	struct timer_list oom_timer;    /* Out of memory timer. */
-	u32 mc_filter[2];
-	spinlock_t lock;
-	unsigned int cur_rx, cur_tx;	/* The next free ring entry */
-	unsigned int dirty_rx, dirty_tx;	/* The ring entries to be free()ed. */
-	unsigned int csr0;	/* CSR0 setting. */
-	unsigned int csr6;	/* Current CSR6 control settings. */
-	void (*link_change) (struct net_device * dev, int csr5);
-	struct platform_device *pdev;
-	unsigned long nir;
-	void __iomem *base_addr;
-	int pad0;		/* Used for 8-byte alignment */
-	struct net_device *dev;
-};
-
-
-/* interrupt.c */
-irqreturn_t tulip_interrupt(int irq, void *dev_instance);
-int tulip_refill_rx(struct net_device *dev);
-int tulip_poll(struct napi_struct *napi, int budget);
-
-/* tulip_core.c */
-extern int tulip_debug;
-void oom_timer(unsigned long data);
-
-static inline void tulip_start_rxtx(struct tulip_private *tp)
-{
-	void __iomem *ioaddr = tp->base_addr;
-	iowrite32(tp->csr6 | RxTx, ioaddr + CSR6);
-	barrier();
-	(void) ioread32(ioaddr + CSR6); /* mmio sync */
-}
-
-static inline void tulip_stop_rxtx(struct tulip_private *tp)
-{
-	void __iomem *ioaddr = tp->base_addr;
-	u32 csr6 = ioread32(ioaddr + CSR6);
-
-	if (csr6 & RxTx) {
-		unsigned i=1300/10;
-		iowrite32(csr6 & ~RxTx, ioaddr + CSR6);
-		barrier();
-		/* wait until in-flight frame completes.
-		 * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin)
-		 * Typically expect this loop to end in < 50 us on 100BT.
-		 */
-		while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS)))
-			udelay(10);
-
-		if (!i)
-			printk(KERN_DEBUG "fixme: tulip_stop_rxtx() failed"
-					" (CSR5 0x%x CSR6 0x%x)\n",
-					ioread32(ioaddr + CSR5),
-					ioread32(ioaddr + CSR6));
-	}
-}
-
-static inline void tulip_restart_rxtx(struct tulip_private *tp)
-{
-	tulip_stop_rxtx(tp);
-	udelay(5);
-	tulip_start_rxtx(tp);
-}
-
-static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr)
-{
-	/* Stop and restart the chip's Tx processes. */
-	tulip_restart_rxtx(tp);
-	/* Trigger an immediate transmit demand. */
-	iowrite32(0, ioaddr + CSR1);
-
-	tp->stats.tx_errors++;
-}
-
-#endif /* __NET_TULIP_H__ */
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/net_core.c b/target/linux/adm8668/files/arch/mips/adm8668/net_core.c
deleted file mode 100644
index 3348c224b5..0000000000
--- a/target/linux/adm8668/files/arch/mips/adm8668/net_core.c
+++ /dev/null
@@ -1,618 +0,0 @@
-/*
- * originally drivers/net/tulip_core.c
- *   Copyright 2000,2001  The Linux Kernel Team
- *   Written/copyright 1994-2001 by Donald Becker.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#define DRV_NAME	"tulip"
-#define DRV_VERSION	"1.1.15-NAPI" /* Keep at least for test */
-#define DRV_RELDATE	"Feb 27, 2007"
-
-#include "net.h"
-
-static char version[] __devinitdata =
-	"ADM8668net driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
-
-#define	MAX_UNITS	2
-
-/*
-  Set the bus performance register.
-	Typical: Set 16 longword cache alignment, no burst limit.
-	Cache alignment bits 15:14	     Burst length 13:8
-		0000	No alignment		0x00000000 unlimited	0800 8 longwords
-		4000	8  longwords		0100 1 longword		1000 16 longwords
-		8000	16 longwords		0200 2 longwords	2000 32 longwords
-		C000	32  longwords		0400 4 longwords
-	Warning: many older 486 systems are broken and require setting 0x00A04800
-	   8 longword cache alignment, 8 longword burst.
-	ToDo: Non-Intel setting could be better.
-*/
-
-//static int csr0 = 0x00200000 | 0x4000;
-static int csr0 = 0;
-
-/* Operational parameters that usually are not changed. */
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT  (4*HZ)
-
-MODULE_AUTHOR("Scott Nicholas <neutronscott@scottn.us>");
-MODULE_DESCRIPTION("ADM8668 new ethernet driver.");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-#ifdef TULIP_DEBUG
-int tulip_debug = TULIP_DEBUG;
-#else
-int tulip_debug = 1;
-#endif
-
-static void tulip_tx_timeout(struct net_device *dev);
-static void tulip_init_ring(struct net_device *dev);
-static void tulip_free_ring(struct net_device *dev);
-static netdev_tx_t tulip_start_xmit(struct sk_buff *skb,
-					  struct net_device *dev);
-static int tulip_open(struct net_device *dev);
-static int tulip_close(struct net_device *dev);
-static void tulip_up(struct net_device *dev);
-static void tulip_down(struct net_device *dev);
-static struct net_device_stats *tulip_get_stats(struct net_device *dev);
-//static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void set_rx_mode(struct net_device *dev);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void poll_tulip(struct net_device *dev);
-#endif
-
-static void tulip_up(struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->base_addr;
-
-	napi_enable(&tp->napi);
-
-	/* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
-	iowrite32(0x00000001, ioaddr + CSR0);
-
-	/* Deassert reset.
-	   Wait the specified 50 PCI cycles after a reset by initializing
-	   Tx and Rx queues and the address filter list. */
-	iowrite32(tp->csr0, ioaddr + CSR0);
-
-	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n",
-		       dev->name, dev->irq);
-
-	iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
-	iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
-	tp->cur_rx = tp->cur_tx = 0;
-	tp->dirty_rx = tp->dirty_tx = 0;
-
-	/* set mac address */
-	iowrite32(get_unaligned_le32(dev->dev_addr), ioaddr + 0xA4);
-	iowrite32(get_unaligned_le16(dev->dev_addr + 4), ioaddr + 0xA8);
-	iowrite32(0, ioaddr + CSR27);
-	iowrite32(0, ioaddr + CSR28);
-
-	tp->csr6 = 0;
-
-	/* Enable automatic Tx underrun recovery. */
-	iowrite32(ioread32(ioaddr + CSR18) | 1, ioaddr + CSR18);
-	tp->csr6 = 0x00040000;
-
-	/* Start the chip's Tx to process setup frame. */
-	tulip_stop_rxtx(tp);
-	barrier();
-	udelay(5);
-	iowrite32(tp->csr6 | TxOn, ioaddr + CSR6);
-
-	/* Enable interrupts by setting the interrupt mask. */
-	iowrite32(VALID_INTR, ioaddr + CSR5);
-	iowrite32(VALID_INTR, ioaddr + CSR7);
-	tulip_start_rxtx(tp);
-	iowrite32(0, ioaddr + CSR2);		/* Rx poll demand */
-
-	if (tulip_debug > 2) {
-		printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
-		       dev->name, ioread32(ioaddr + CSR0),
-		       ioread32(ioaddr + CSR5),
-		       ioread32(ioaddr + CSR6));
-	}
-
-	init_timer(&tp->oom_timer);
-        tp->oom_timer.data = (unsigned long)dev;
-        tp->oom_timer.function = oom_timer;
-}
-
-static int
-tulip_open(struct net_device *dev)
-{
-	int retval;
-
-	tulip_init_ring (dev);
-
-	retval = request_irq(dev->irq, tulip_interrupt, 0, dev->name, dev);
-	if (retval)
-		goto free_ring;
-
-	tulip_up (dev);
-
-	netif_start_queue (dev);
-
-	return 0;
-
-free_ring:
-	tulip_free_ring (dev);
-	return retval;
-}
-
-
-static void tulip_tx_timeout(struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->base_addr;
-	unsigned long flags;
-
-	spin_lock_irqsave (&tp->lock, flags);
-
-	dev_warn(&dev->dev,
-		 "Transmit timed out, status %08x, CSR12 %08x, resetting...\n",
-		 ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
-
-	tulip_tx_timeout_complete(tp, ioaddr);
-
-	spin_unlock_irqrestore (&tp->lock, flags);
-	dev->trans_start = jiffies; /* prevent tx timeout */
-	netif_wake_queue (dev);
-}
-
-
-/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void tulip_init_ring(struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	int i;
-
-	tp->nir = 0;
-
-	for (i = 0; i < RX_RING_SIZE; i++) {
-		tp->rx_ring[i].status = 0x00000000;
-		tp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ);
-		tp->rx_ring[i].buffer2 = cpu_to_le32(tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * (i + 1));
-		tp->rx_buffers[i].skb = NULL;
-		tp->rx_buffers[i].mapping = 0;
-	}
-	/* Mark the last entry as wrapping the ring. */
-	tp->rx_ring[i-1].length = cpu_to_le32(PKT_BUF_SZ | DESC_RING_WRAP);
-	tp->rx_ring[i-1].buffer2 = cpu_to_le32(tp->rx_ring_dma);
-
-	for (i = 0; i < RX_RING_SIZE; i++) {
-		dma_addr_t mapping;
-		/* Note the receive buffer must be longword aligned.
-		   dev_alloc_skb() provides 16 byte alignment.  But do *not*
-		   use skb_reserve() to align the IP header! */
-		struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ);
-		tp->rx_buffers[i].skb = skb;
-		if (skb == NULL)
-			break;
-		mapping = dma_map_single(&dev->dev, skb->data,
-				PKT_BUF_SZ, DMA_FROM_DEVICE);
-		tp->rx_buffers[i].mapping = mapping;
-		skb->dev = dev;			/* Mark as being used by this device. */
-		tp->rx_ring[i].status = cpu_to_le32(DescOwned);	/* Owned by Tulip chip */
-		tp->rx_ring[i].buffer1 = cpu_to_le32(mapping);
-	}
-	tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
-
-	/* The Tx buffer descriptor is filled in as needed, but we
-	   do need to clear the ownership bit. */
-	for (i = 0; i < TX_RING_SIZE; i++) {
-		tp->tx_buffers[i].skb = NULL;
-		tp->tx_buffers[i].mapping = 0;
-		tp->tx_ring[i].status = 0x00000000;
-		tp->tx_ring[i].buffer2 = cpu_to_le32(tp->tx_ring_dma + sizeof(struct tulip_tx_desc) * (i + 1));
-	}
-	tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma);
-}
-
-static netdev_tx_t
-tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	int entry;
-	u32 flag;
-	dma_addr_t mapping;
-	unsigned long flags;
-
-	spin_lock_irqsave(&tp->lock, flags);
-
-	/* Calculate the next Tx descriptor entry. */
-	entry = tp->cur_tx % TX_RING_SIZE;
-
-	tp->tx_buffers[entry].skb = skb;
-	mapping = dma_map_single(&tp->pdev->dev, skb->data, skb->len,
-			DMA_TO_DEVICE);
-	tp->tx_buffers[entry].mapping = mapping;
-	tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
-
-	if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
-		flag = 0x60000000; /* No interrupt */
-	} else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) {
-		flag = 0xe0000000; /* Tx-done intr. */
-	} else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) {
-		flag = 0x60000000; /* No Tx-done intr. */
-	} else {		/* Leave room for set_rx_mode() to fill entries. */
-		flag = 0xe0000000; /* Tx-done intr. */
-		netif_stop_queue(dev);
-	}
-	if (entry == TX_RING_SIZE-1)
-		flag = 0xe0000000 | DESC_RING_WRAP;
-
-	tp->tx_ring[entry].length = cpu_to_le32(skb->len | flag);
-	/* if we were using Transmit Automatic Polling, we would need a
-	 * wmb() here. */
-	tp->tx_ring[entry].status = cpu_to_le32(DescOwned);
-	wmb();
-
-	tp->cur_tx++;
-
-	/* Trigger an immediate transmit demand. */
-	iowrite32(0, tp->base_addr + CSR1);
-
-	spin_unlock_irqrestore(&tp->lock, flags);
-
-	return NETDEV_TX_OK;
-}
-
-static void tulip_clean_tx_ring(struct tulip_private *tp)
-{
-	unsigned int dirty_tx;
-
-	for (dirty_tx = tp->dirty_tx ; tp->cur_tx - dirty_tx > 0;
-		dirty_tx++) {
-		int entry = dirty_tx % TX_RING_SIZE;
-		int status = le32_to_cpu(tp->tx_ring[entry].status);
-
-		if (status < 0) {
-			tp->stats.tx_errors++;	/* It wasn't Txed */
-			tp->tx_ring[entry].status = 0;
-		}
-
-		dma_unmap_single(&tp->pdev->dev, tp->tx_buffers[entry].mapping,
-			tp->tx_buffers[entry].skb->len,
-			DMA_TO_DEVICE);
-
-		/* Free the original skb. */
-		dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
-		tp->tx_buffers[entry].skb = NULL;
-		tp->tx_buffers[entry].mapping = 0;
-	}
-}
-
-static void tulip_down (struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->base_addr;
-	unsigned long flags;
-
-	napi_disable(&tp->napi);
-	del_timer_sync (&tp->oom_timer);
-	spin_lock_irqsave (&tp->lock, flags);
-
-	/* Disable interrupts by clearing the interrupt mask. */
-	iowrite32 (0x00000000, ioaddr + CSR7);
-
-	/* Stop the Tx and Rx processes. */
-	tulip_stop_rxtx(tp);
-
-	/* prepare receive buffers */
-	tulip_refill_rx(dev);
-
-	/* release any unconsumed transmit buffers */
-	tulip_clean_tx_ring(tp);
-
-	if (ioread32 (ioaddr + CSR6) != 0xffffffff)
-		tp->stats.rx_missed_errors += ioread32 (ioaddr + CSR8) & 0xffff;
-
-	spin_unlock_irqrestore (&tp->lock, flags);
-}
-
-static void tulip_free_ring (struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	int i;
-
-	/* Free all the skbuffs in the Rx queue. */
-	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb = tp->rx_buffers[i].skb;
-		dma_addr_t mapping = tp->rx_buffers[i].mapping;
-
-		tp->rx_buffers[i].skb = NULL;
-		tp->rx_buffers[i].mapping = 0;
-
-		tp->rx_ring[i].status = 0;	/* Not owned by Tulip chip. */
-		tp->rx_ring[i].length = 0;
-		/* An invalid address. */
-		tp->rx_ring[i].buffer1 = cpu_to_le32(0xBADF00D0);
-		if (skb) {
-			dma_unmap_single(&tp->pdev->dev, mapping, PKT_BUF_SZ,
-				DMA_FROM_DEVICE);
-			dev_kfree_skb (skb);
-		}
-	}
-
-	for (i = 0; i < TX_RING_SIZE; i++) {
-		struct sk_buff *skb = tp->tx_buffers[i].skb;
-
-		if (skb != NULL) {
-			dma_unmap_single(&tp->pdev->dev,
-				tp->tx_buffers[i].mapping, skb->len, DMA_TO_DEVICE);
-			dev_kfree_skb (skb);
-		}
-		tp->tx_buffers[i].skb = NULL;
-		tp->tx_buffers[i].mapping = 0;
-	}
-}
-
-static int tulip_close (struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->base_addr;
-
-	netif_stop_queue (dev);
-
-	tulip_down (dev);
-
-	if (tulip_debug > 1)
-		dev_printk(KERN_DEBUG, &dev->dev,
-			   "Shutting down ethercard, status was %02x\n",
-			   ioread32 (ioaddr + CSR5));
-
-	free_irq (dev->irq, dev);
-
-	tulip_free_ring (dev);
-
-	return 0;
-}
-
-static struct net_device_stats *tulip_get_stats(struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->base_addr;
-
-	if (netif_running(dev)) {
-		unsigned long flags;
-
-		spin_lock_irqsave (&tp->lock, flags);
-
-		tp->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
-
-		spin_unlock_irqrestore(&tp->lock, flags);
-	}
-
-	return &tp->stats;
-}
-
-
-static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
-	strcpy(info->driver, DRV_NAME);
-	strcpy(info->version, DRV_VERSION);
-	strcpy(info->bus_info, "mmio");
-}
-
-static const struct ethtool_ops ops = {
-	.get_drvinfo = tulip_get_drvinfo
-};
-
-static void set_rx_mode(struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->base_addr;
-	int csr6;
-
-	csr6 = ioread32(ioaddr + CSR6) & ~0x00D5;
-
-	tp->csr6 &= ~0x00D5;
-	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
-		tp->csr6 |= AcceptAllMulticast | AcceptAllPhys;
-		csr6 |= AcceptAllMulticast | AcceptAllPhys;
-	} else if ((netdev_mc_count(dev) > 1000) ||
-		   (dev->flags & IFF_ALLMULTI)) {
-		/* Too many to filter well -- accept all multicasts. */
-		tp->csr6 |= AcceptAllMulticast;
-		csr6 |= AcceptAllMulticast;
-	} else {
-		/* Some work-alikes have only a 64-entry hash filter table. */
-		/* Should verify correctness on big-endian/__powerpc__ */
-		struct netdev_hw_addr *ha;
-		if (netdev_mc_count(dev) > 64) {
-			/* Arbitrary non-effective limit. */
-			tp->csr6 |= AcceptAllMulticast;
-			csr6 |= AcceptAllMulticast;
-		} else {
-			u32 mc_filter[2] = {0, 0};		 /* Multicast hash filter */
-			int filterbit;
-			netdev_for_each_mc_addr(ha, dev) {
-				filterbit = ether_crc_le(ETH_ALEN, ha->addr);
-				filterbit &= 0x3f;
-				mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
-				if (tulip_debug > 2)
-					dev_info(&dev->dev,
-						 "Added filter for %pM  %08x bit %d\n",
-						 ha->addr,
-						 ether_crc(ETH_ALEN, ha->addr),
-						 filterbit);
-			}
-			if (mc_filter[0] == tp->mc_filter[0]  &&
-				mc_filter[1] == tp->mc_filter[1])
-				;				/* No change. */
-			iowrite32(mc_filter[0], ioaddr + CSR27);
-			iowrite32(mc_filter[1], ioaddr + CSR28);
-			tp->mc_filter[0] = mc_filter[0];
-			tp->mc_filter[1] = mc_filter[1];
-		}
-	}
-
-	if (dev->irq == ADM8668_LAN_IRQ)
-		csr6 |= (1 << 9);	/* force 100Mbps full duplex */
-//	csr6 |= 1;	/* pad 2 bytes. vlan? */
-
-	iowrite32(csr6, ioaddr + CSR6);
-}
-
-static const struct net_device_ops tulip_netdev_ops = {
-	.ndo_open		= tulip_open,
-	.ndo_start_xmit		= tulip_start_xmit,
-	.ndo_tx_timeout		= tulip_tx_timeout,
-	.ndo_stop		= tulip_close,
-	.ndo_get_stats		= tulip_get_stats,
-	.ndo_set_rx_mode	= set_rx_mode,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	 = poll_tulip,
-#endif
-};
-
-static int __devinit adm8668net_probe(struct platform_device *pdev)
-{
-	struct tulip_private *tp;
-	struct net_device *dev;
-	struct resource *res;
-	void __iomem *ioaddr;
-	int irq;
-
-	if (pdev->id < 0 || pdev->id >= MAX_UNITS)
-		return -EINVAL;
-
-	if (!(res = platform_get_resource(pdev, IORESOURCE_IRQ, 0)))
-		return -ENODEV;
-	irq = res->start;
-	if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
-		return -ENODEV;
-	if (!(ioaddr = ioremap(res->start, res->end - res->start)))
-		return -ENODEV;
-	if (!(dev = alloc_etherdev(sizeof (*tp))))
-		return -ENOMEM;
-
-	/* setup net dev */
-	dev->base_addr = (unsigned long)res->start;
-	dev->irq = irq;
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-	/* tulip private struct */
-	tp = netdev_priv(dev);
-	tp->dev = dev;
-	tp->base_addr = ioaddr;
-	tp->csr0 = csr0;
-	tp->pdev = pdev;
-	tp->rx_ring = dma_alloc_coherent(&pdev->dev,
-				sizeof(struct tulip_rx_desc) * RX_RING_SIZE +
-				sizeof(struct tulip_tx_desc) * TX_RING_SIZE,
-				&tp->rx_ring_dma, GFP_KERNEL);
-	if (!tp->rx_ring)
-		return -ENODEV;
-	tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE);
-	tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE;
-
-	spin_lock_init(&tp->lock);
-
-	/* Stop the chip's Tx and Rx processes. */
-	tulip_stop_rxtx(tp);
-
-	/* Clear the missed-packet counter. */
-	ioread32(ioaddr + CSR8);
-
-	/* Addresses are stored in BSP area of NOR flash */
-	if (irq == ADM8668_WAN_IRQ)
-		memcpy(dev->dev_addr, (char *)ADM8668_WAN_MACADDR, 6);
-	else
-		memcpy(dev->dev_addr, (char *)ADM8668_LAN_MACADDR, 6);
-
-	/* The Tulip-specific entries in the device structure. */
-	dev->netdev_ops = &tulip_netdev_ops;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	netif_napi_add(dev, &tp->napi, tulip_poll, 16);
-	SET_ETHTOOL_OPS(dev, &ops);
-
-	if (register_netdev(dev))
-		goto err_out_free_ring;
-
-	dev_info(&dev->dev,
-		 "ADM8668net at MMIO %#lx %pM, IRQ %d\n",
-		 (unsigned long)dev->base_addr, dev->dev_addr, irq);
-
-	platform_set_drvdata(pdev, dev);
-	return 0;
-
-err_out_free_ring:
-	dma_free_coherent(&pdev->dev,
-		     sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
-		     sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
-		     tp->rx_ring, tp->rx_ring_dma);
-	return -ENODEV;
-}
-
-static int __devexit adm8668net_remove(struct platform_device *pdev)
-{
-	struct net_device *dev = platform_get_drvdata (pdev);
-	struct tulip_private *tp;
-
-	if (!dev)
-		return -ENODEV;
-
-	tp = netdev_priv(dev);
-	unregister_netdev(dev);
-	dma_free_coherent(&pdev->dev,
-			     sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
-			     sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
-			     tp->rx_ring, tp->rx_ring_dma);
-	iounmap(tp->base_addr);
-	free_netdev(dev);
-	platform_set_drvdata(pdev, NULL);
-	return 0;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-
-static void poll_tulip (struct net_device *dev)
-{
-	/* disable_irq here is not very nice, but with the lockless
-	   interrupt handler we have no other choice. */
-	disable_irq(dev->irq);
-	tulip_interrupt(dev->irq, dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-static struct platform_driver adm8668net_platform_driver = {
-	.probe = adm8668net_probe,
-	.remove = __devexit_p(adm8668net_remove),
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "adm8668_eth"
-	},
-};
-
-static int __init adm8668net_init(void)
-{
-	pr_info("%s", version);
-	return platform_driver_register(&adm8668net_platform_driver);
-}
-
-static void __exit adm8668net_exit(void)
-{
-	platform_driver_unregister(&adm8668net_platform_driver);
-}
-
-module_init(adm8668net_init);
-module_exit(adm8668net_exit);
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/net_intr.c b/target/linux/adm8668/files/arch/mips/adm8668/net_intr.c
deleted file mode 100644
index 113dbaebd7..0000000000
--- a/target/linux/adm8668/files/arch/mips/adm8668/net_intr.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/*
- * originally drivers/net/tulip/interrupt.c
- *   Copyright 2000,2001  The Linux Kernel Team
- *   Written/copyright 1994-2001 by Donald Becker.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include "net.h"
-
-int tulip_refill_rx(struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	int entry;
-	int refilled = 0;
-
-	/* Refill the Rx ring buffers. */
-	for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) {
-		entry = tp->dirty_rx % RX_RING_SIZE;
-		if (tp->rx_buffers[entry].skb == NULL) {
-			struct sk_buff *skb;
-			dma_addr_t mapping;
-
-			skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ);
-			if (skb == NULL)
-				break;
-
-			mapping = dma_map_single(&dev->dev, skb->data,
-				PKT_BUF_SZ, DMA_FROM_DEVICE);
-			tp->rx_buffers[entry].mapping = mapping;
-
-			skb->dev = dev;			/* Mark as being used by this device. */
-			tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping);
-			refilled++;
-		}
-		tp->rx_ring[entry].status = cpu_to_le32(DescOwned);
-	}
-	return refilled;
-}
-
-void oom_timer(unsigned long data)
-{
-        struct net_device *dev = (struct net_device *)data;
-	struct tulip_private *tp = netdev_priv(dev);
-	napi_schedule(&tp->napi);
-}
-
-int tulip_poll(struct napi_struct *napi, int budget)
-{
-	struct tulip_private *tp = container_of(napi, struct tulip_private, napi);
-	struct net_device *dev = tp->dev;
-	int entry = tp->cur_rx % RX_RING_SIZE;
-	int work_done = 0;
-
-	if (tulip_debug > 4)
-		printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
-		       entry, tp->rx_ring[entry].status);
-
-       do {
-		if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
-			printk(KERN_DEBUG " In tulip_poll(), hardware disappeared\n");
-			break;
-		}
-               /* Acknowledge current RX interrupt sources. */
-               iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5);
-
-
-               /* If we own the next entry, it is a new packet. Send it up. */
-               while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
-                       s32 status = le32_to_cpu(tp->rx_ring[entry].status);
-		       short pkt_len;
-
-                       if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
-                               break;
-
-                       if (tulip_debug > 5)
-                               printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
-                                      dev->name, entry, status);
-
-		       if (++work_done >= budget)
-                               goto not_done;
-
-		       /*
-			* Omit the four octet CRC from the length.
-			* (May not be considered valid until we have
-			* checked status for RxLengthOver2047 bits)
-			*/
-		       pkt_len = ((status >> 16) & 0x7ff) - 4;
-
-#if 0
-			csr6 = ioread32(tp->base_addr + CSR6);
-				if (csr6 & 0x1)
-					pkt_len += 2;
-
-#endif
-		       /*
-			* Maximum pkt_len is 1518 (1514 + vlan header)
-			* Anything higher than this is always invalid
-			* regardless of RxLengthOver2047 bits
-			*/
-
-		       if ((status & (RxLengthOver2047 |
-				      RxDescCRCError |
-				      RxDescCollisionSeen |
-				      RxDescRunt |
-				      RxDescDescErr |
-				      RxWholePkt)) != RxWholePkt ||
-			   pkt_len > 1518) {
-			       if ((status & (RxLengthOver2047 |
-					      RxWholePkt)) != RxWholePkt) {
-                                /* Ingore earlier buffers. */
-                                       if ((status & 0xffff) != 0x7fff) {
-                                               if (tulip_debug > 1)
-                                                       dev_warn(&dev->dev,
-								"Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
-								status);
-                                               tp->stats.rx_length_errors++;
-                                       }
-			       } else {
-                                /* There was a fatal error. */
-                                       if (tulip_debug > 2)
-                                               printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
-                                                      dev->name, status);
-                                       tp->stats.rx_errors++; /* end of a packet.*/
-				       if (pkt_len > 1518 ||
-					   (status & RxDescRunt))
-					       tp->stats.rx_length_errors++;
-
-                                       if (status & 0x0004) tp->stats.rx_frame_errors++;
-                                       if (status & 0x0002) tp->stats.rx_crc_errors++;
-                                       if (status & 0x0001) tp->stats.rx_fifo_errors++;
-                               }
-                       } else {
-                               struct sk_buff *skb = tp->rx_buffers[entry].skb;
-                               char *temp = skb_put(skb, pkt_len);
-
-#if 0
-				if (csr6 & 1)
-					skb_pull(skb, 2);
-#endif
-#ifndef final_version
-                                       if (tp->rx_buffers[entry].mapping !=
-						le32_to_cpu(tp->rx_ring[entry].buffer1)) {
-                                               dev_err(&dev->dev,
-						       "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n",
-						       le32_to_cpu(tp->rx_ring[entry].buffer1),
-						       (unsigned long long)tp->rx_buffers[entry].mapping,
-						       skb->head, temp);
-                                       }
-#endif
-
-                                       tp->rx_buffers[entry].skb = NULL;
-                                       tp->rx_buffers[entry].mapping = 0;
-                               skb->protocol = eth_type_trans(skb, dev);
-
-                               netif_receive_skb(skb);
-
-                               tp->stats.rx_packets++;
-                               tp->stats.rx_bytes += pkt_len;
-                       }
-                       entry = (++tp->cur_rx) % RX_RING_SIZE;
-                       if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
-                               tulip_refill_rx(dev);
-
-                }
-
-               /* New ack strategy... irq does not ack Rx any longer
-                  hopefully this helps */
-
-               /* Really bad things can happen here... If new packet arrives
-                * and an irq arrives (tx or just due to occasionally unset
-                * mask), it will be acked by irq handler, but new thread
-                * is not scheduled. It is major hole in design.
-                * No idea how to fix this if "playing with fire" will fail
-                * tomorrow (night 011029). If it will not fail, we won
-                * finally: amount of IO did not increase at all. */
-       } while ((ioread32(tp->base_addr + CSR5) & RxIntr));
-
-         tulip_refill_rx(dev);
-
-         /* If RX ring is not full we are out of memory. */
-         if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
-		 goto oom;
-
-         /* Remove us from polling list and enable RX intr. */
-         napi_complete(napi);
-         iowrite32(VALID_INTR, tp->base_addr+CSR7);
-
-         /* The last op happens after poll completion. Which means the following:
-          * 1. it can race with disabling irqs in irq handler
-          * 2. it can race with dise/enabling irqs in other poll threads
-          * 3. if an irq raised after beginning loop, it will be immediately
-          *    triggered here.
-          *
-          * Summarizing: the logic results in some redundant irqs both
-          * due to races in masking and due to too late acking of already
-          * processed irqs. But it must not result in losing events.
-          */
-
-         return work_done;
-
- not_done:
-         if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
-             tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
-                 tulip_refill_rx(dev);
-
-         if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
-		 goto oom;
-
-         return work_done;
-
- oom:    /* Executed with RX ints disabled */
-
-         /* Start timer, stop polling, but do not enable rx interrupts. */
-         mod_timer(&tp->oom_timer, jiffies+1);
-
-         /* Think: timer_pending() was an explicit signature of bug.
-          * Timer can be pending now but fired and completed
-          * before we did napi_complete(). See? We would lose it. */
-
-         /* remove ourselves from the polling list */
-         napi_complete(napi);
-
-         return work_done;
-}
-
-/* The interrupt handler does all of the Rx thread work and cleans up
-   after the Tx thread. */
-irqreturn_t tulip_interrupt(int irq, void *dev_instance)
-{
-	struct net_device *dev = (struct net_device *)dev_instance;
-	struct tulip_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->base_addr;
-	int csr5;
-	int missed;
-	int rx = 0;
-	int tx = 0;
-	int oi = 0;
-	int maxrx = RX_RING_SIZE;
-	int maxtx = TX_RING_SIZE;
-	int maxoi = TX_RING_SIZE;
-	int rxd = 0;
-	unsigned int work_count = 25;
-	unsigned int handled = 0;
-
-	/* Let's see whether the interrupt really is for us */
-	csr5 = ioread32(ioaddr + CSR5);
-
-	if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
-		return IRQ_RETVAL(handled);
-
-	tp->nir++;
-
-	do {
-
-		if (!rxd && (csr5 & (RxIntr | RxNoBuf))) {
-			rxd++;
-			/* Mask RX intrs and add the device to poll list. */
-			iowrite32(VALID_INTR&~RxPollInt, ioaddr + CSR7);
-			napi_schedule(&tp->napi);
-
-			if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
-                               break;
-		}
-
-               /* Acknowledge the interrupt sources we handle here ASAP
-                  the poll function does Rx and RxNoBuf acking */
-
-		iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5);
-
-		if (tulip_debug > 4)
-			printk(KERN_DEBUG "%s: interrupt  csr5=%#8.8x new csr5=%#8.8x\n",
-			       dev->name, csr5, ioread32(ioaddr + CSR5));
-
-
-		if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
-			unsigned int dirty_tx;
-
-			spin_lock(&tp->lock);
-
-			for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0;
-				 dirty_tx++) {
-				int entry = dirty_tx % TX_RING_SIZE;
-				int status = le32_to_cpu(tp->tx_ring[entry].status);
-
-				if (status < 0)
-					break;			/* It still has not been Txed */
-
-				if (status & 0x8000) {
-					/* There was an major error, log it. */
-#ifndef final_version
-					if (tulip_debug > 1)
-						printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
-						       dev->name, status);
-#endif
-					tp->stats.tx_errors++;
-					if (status & 0x4104) tp->stats.tx_aborted_errors++;
-					if (status & 0x0C00) tp->stats.tx_carrier_errors++;
-					if (status & 0x0200) tp->stats.tx_window_errors++;
-					if (status & 0x0002) tp->stats.tx_fifo_errors++;
-					if (status & 0x0080) tp->stats.tx_heartbeat_errors++;
-				} else {
-					tp->stats.tx_bytes +=
-						tp->tx_buffers[entry].skb->len;
-					tp->stats.collisions += (status >> 3) & 15;
-					tp->stats.tx_packets++;
-				}
-
-				dma_unmap_single(&tp->pdev->dev, tp->tx_buffers[entry].mapping,
-					tp->tx_buffers[entry].skb->len, DMA_TO_DEVICE);
-				/* Free the original skb. */
-				dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
-				tp->tx_buffers[entry].skb = NULL;
-				tp->tx_buffers[entry].mapping = 0;
-				tx++;
-			}
-
-#ifndef final_version
-			if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
-				dev_err(&dev->dev,
-					"Out-of-sync dirty pointer, %d vs. %d\n",
-					dirty_tx, tp->cur_tx);
-				dirty_tx += TX_RING_SIZE;
-			}
-#endif
-
-			if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2)
-				netif_wake_queue(dev);
-
-			tp->dirty_tx = dirty_tx;
-			if (csr5 & TxDied) {
-				if (tulip_debug > 2)
-					dev_warn(&dev->dev,
-						 "The transmitter stopped.  CSR5 is %x, CSR6 %x, new CSR6 %x\n",
-						 csr5, ioread32(ioaddr + CSR6),
-						 tp->csr6);
-				tulip_restart_rxtx(tp);
-			}
-			spin_unlock(&tp->lock);
-		}
-
-		/* Log errors. */
-		if (csr5 & AbnormalIntr) {	/* Abnormal error summary bit. */
-			if (csr5 == 0xffffffff)
-				break;
-			if (csr5 & TxJabber) tp->stats.tx_errors++;
-			if (csr5 & TxFIFOUnderflow) {
-				if ((tp->csr6 & 0xC000) != 0xC000)
-					tp->csr6 += 0x4000;	/* Bump up the Tx threshold */
-				else
-					tp->csr6 |= 0x00200000;  /* Store-n-forward. */
-				/* Restart the transmit process. */
-				tulip_restart_rxtx(tp);
-				iowrite32(0, ioaddr + CSR1);
-			}
-			if (csr5 & (RxDied | RxNoBuf)) {
-				iowrite32(tp->mc_filter[0], ioaddr + CSR27);
-				iowrite32(tp->mc_filter[1], ioaddr + CSR28);
-			}
-			if (csr5 & RxDied) {		/* Missed a Rx frame. */
-                                tp->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
-				tp->stats.rx_errors++;
-				tulip_start_rxtx(tp);
-			}
-			/*
-			 * NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this
-			 * call is ever done under the spinlock
-			 */
-			if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) {
-				if (tp->link_change)
-					(tp->link_change)(dev, csr5);
-			}
-			if (csr5 & SystemError) {
-				int error = (csr5 >> 23) & 7;
-				/* oops, we hit a PCI error.  The code produced corresponds
-				 * to the reason:
-				 *  0 - parity error
-				 *  1 - master abort
-				 *  2 - target abort
-				 * Note that on parity error, we should do a software reset
-				 * of the chip to get it back into a sane state (according
-				 * to the 21142/3 docs that is).
-				 *   -- rmk
-				 */
-				dev_err(&dev->dev,
-					"(%lu) System Error occurred (%d)\n",
-					tp->nir, error);
-			}
-			/* Clear all error sources, included undocumented ones! */
-			iowrite32(0x0800f7ba, ioaddr + CSR5);
-			oi++;
-		}
-		if (csr5 & TimerInt) {
-
-			if (tulip_debug > 2)
-				dev_err(&dev->dev,
-					"Re-enabling interrupts, %08x\n",
-					csr5);
-			iowrite32(VALID_INTR, ioaddr + CSR7);
-			oi++;
-		}
-		if (tx > maxtx || rx > maxrx || oi > maxoi) {
-			if (tulip_debug > 1)
-				dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n",
-					 csr5, tp->nir, tx, rx, oi);
-
-                       /* Acknowledge all interrupt sources. */
-                        iowrite32(0x8001ffff, ioaddr + CSR5);
-                        /* Mask all interrupting sources, set timer to
-				re-enable. */
-                        iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7);
-                        iowrite32(0x0012, ioaddr + CSR11);
-			break;
-		}
-
-		work_count--;
-		if (work_count == 0)
-			break;
-
-		csr5 = ioread32(ioaddr + CSR5);
-
-		if (rxd)
-			csr5 &= ~RxPollInt;
-	} while ((csr5 & (TxNoBuf |
-			  TxDied |
-			  TxIntr |
-			  TimerInt |
-			  /* Abnormal intr. */
-			  RxDied |
-			  TxFIFOUnderflow |
-			  TxJabber |
-			  TPLnkFail |
-			  SystemError )) != 0);
-
-	if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) {
-		tp->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed;
-	}
-
-	if (tulip_debug > 4)
-		printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#04x\n",
-		       dev->name, ioread32(ioaddr + CSR5));
-
-	return IRQ_HANDLED;
-}