diff options
author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2007-06-28 16:08:28 +0000 |
---|---|---|
committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2007-06-28 16:08:28 +0000 |
commit | 8b2c7d0c931af2ea427f3a22d2b7b373f8d6cd1a (patch) | |
tree | 52a0a8dbfa12dc31754a7b54f80ac2f124a18bb5 /target/linux/adm5120-2.6/patches | |
parent | 3444eefb65269101b26abc7ac37068e414421195 (diff) |
[adm5120] update to 2.6.22-rc6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7758 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/adm5120-2.6/patches')
12 files changed, 295 insertions, 119 deletions
diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch index c1b2688d5a..da601b919d 100644 --- a/target/linux/adm5120-2.6/patches/001-adm5120.patch +++ b/target/linux/adm5120-2.6/patches/001-adm5120.patch @@ -1,11 +1,11 @@ -Index: linux-2.6.21.1/arch/mips/Kconfig +Index: linux-2.6.22-rc6/arch/mips/Kconfig =================================================================== ---- linux-2.6.21.1.orig/arch/mips/Kconfig -+++ linux-2.6.21.1/arch/mips/Kconfig -@@ -16,6 +16,17 @@ choice +--- linux-2.6.22-rc6.orig/arch/mips/Kconfig ++++ linux-2.6.22-rc6/arch/mips/Kconfig +@@ -15,6 +15,17 @@ choice prompt "System type" default SGI_IP22 - + +config MIPS_ADM5120 + bool "Support for ADM5120 SoC" + select SYS_HAS_CPU_MIPS32_R1 @@ -17,24 +17,24 @@ Index: linux-2.6.21.1/arch/mips/Kconfig + select SYS_SUPPORTS_32BIT_KERNEL + select GENERIC_GPIO + - config MIPS_MTX1 - bool "4G Systems MTX-1 board" - select DMA_NONCOHERENT -@@ -766,6 +775,7 @@ - + config MACH_ALCHEMY + bool "Alchemy processor based machines" + +@@ -658,6 +669,7 @@ config TOSHIBA_RBTX4938 + endchoice - + +source "arch/mips/adm5120/Kconfig" + source "arch/mips/au1000/Kconfig" source "arch/mips/ddb5xxx/Kconfig" source "arch/mips/gt64120/ev64120/Kconfig" - source "arch/mips/jazz/Kconfig" -Index: linux-2.6.21.1/arch/mips/Makefile +Index: linux-2.6.22-rc6/arch/mips/Makefile =================================================================== ---- linux-2.6.21.1.orig/arch/mips/Makefile -+++ linux-2.6.21.1/arch/mips/Makefile +--- linux-2.6.22-rc6.orig/arch/mips/Makefile ++++ linux-2.6.22-rc6/arch/mips/Makefile @@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 - + # +# ADMtek 5120 +# @@ -47,18 +47,18 @@ Index: linux-2.6.21.1/arch/mips/Makefile # Common Alchemy Au1x00 stuff # core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ -Index: linux-2.6.21.1/include/asm-mips/bootinfo.h +Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h =================================================================== ---- linux-2.6.21.1.orig/include/asm-mips/bootinfo.h -+++ linux-2.6.21.1/include/asm-mips/bootinfo.h +--- linux-2.6.22-rc6.orig/include/asm-mips/bootinfo.h ++++ linux-2.6.22-rc6/include/asm-mips/bootinfo.h @@ -213,6 +213,57 @@ #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ - + +/* + * Valid machtype for group ADMtek ADM5120 + */ -+#define MACH_GROUP_ADM5120 23 ++#define MACH_GROUP_ADM5120 26 +#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */ +#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */ +#define MACH_ADM5120_WP54G 2 /* Compex WP54G */ @@ -107,5 +107,5 @@ Index: linux-2.6.21.1/include/asm-mips/bootinfo.h +#define MACH_ADM5120_BR6104K 47 /* Edimax BR-6104K */ + #define CL_SIZE COMMAND_LINE_SIZE - + const char *get_system_type(void); diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch index c6237c6dd0..355c126c92 100644 --- a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch +++ b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch @@ -1,8 +1,8 @@ -Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig +Index: linux-2.6.22-rc6/drivers/mtd/maps/Kconfig =================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/maps/Kconfig -+++ linux-2.6.21.1/drivers/mtd/maps/Kconfig -@@ -605,5 +605,10 @@ config MTD_PLATRAM +--- linux-2.6.22-rc6.orig/drivers/mtd/maps/Kconfig ++++ linux-2.6.22-rc6/drivers/mtd/maps/Kconfig +@@ -620,5 +620,10 @@ config MTD_PLATRAM This selection automatically selects the map_ram driver. @@ -13,11 +13,11 @@ Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig + endmenu -Index: linux-2.6.21.1/drivers/mtd/maps/Makefile +Index: linux-2.6.22-rc6/drivers/mtd/maps/Makefile =================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/maps/Makefile -+++ linux-2.6.21.1/drivers/mtd/maps/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o +--- linux-2.6.22-rc6.orig/drivers/mtd/maps/Makefile ++++ linux-2.6.22-rc6/drivers/mtd/maps/Makefile +@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch index cbd28b1aa8..9dde782501 100644 --- a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch +++ b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch @@ -1,7 +1,7 @@ -Index: linux-2.6.21.1/drivers/net/Kconfig +Index: linux-2.6.22-rc6/drivers/net/Kconfig =================================================================== ---- linux-2.6.21.1.orig/drivers/net/Kconfig -+++ linux-2.6.21.1/drivers/net/Kconfig +--- linux-2.6.22-rc6.orig/drivers/net/Kconfig ++++ linux-2.6.22-rc6/drivers/net/Kconfig @@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. @@ -13,10 +13,10 @@ Index: linux-2.6.21.1/drivers/net/Kconfig config NET_SB1250_MAC tristate "SB1250 Ethernet support" depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC -Index: linux-2.6.21.1/drivers/net/Makefile +Index: linux-2.6.22-rc6/drivers/net/Makefile =================================================================== ---- linux-2.6.21.1.orig/drivers/net/Makefile -+++ linux-2.6.21.1/drivers/net/Makefile +--- linux-2.6.22-rc6.orig/drivers/net/Makefile ++++ linux-2.6.22-rc6/drivers/net/Makefile @@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o # This is also a 82596 and should probably be merged obj-$(CONFIG_LP486E) += lp486e.o diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch index 8a6d0205e2..eb78e03574 100644 --- a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch +++ b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch @@ -1,7 +1,7 @@ -Index: linux-2.6.21.1/drivers/serial/Makefile +Index: linux-2.6.22-rc6/drivers/serial/Makefile =================================================================== ---- linux-2.6.21.1.orig/drivers/serial/Makefile -+++ linux-2.6.21.1/drivers/serial/Makefile +--- linux-2.6.22-rc6.orig/drivers/serial/Makefile ++++ linux-2.6.22-rc6/drivers/serial/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o @@ -10,25 +10,25 @@ Index: linux-2.6.21.1/drivers/serial/Makefile obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o -Index: linux-2.6.21.1/include/linux/serial_core.h +Index: linux-2.6.22-rc6/include/linux/serial_core.h =================================================================== ---- linux-2.6.21.1.orig/include/linux/serial_core.h -+++ linux-2.6.21.1/include/linux/serial_core.h -@@ -135,6 +135,9 @@ - /* Xilinx uartlite */ - #define PORT_UARTLITE 74 +--- linux-2.6.22-rc6.orig/include/linux/serial_core.h ++++ linux-2.6.22-rc6/include/linux/serial_core.h +@@ -143,6 +143,9 @@ + #define PORT_KS8695 76 + +/* ADMtek ADM5120 SoC */ -+#define PORT_ADM5120 68 ++#define PORT_ADM5120 77 + #ifdef __KERNEL__ #include <linux/compiler.h> -Index: linux-2.6.21.1/drivers/serial/Kconfig +Index: linux-2.6.22-rc6/drivers/serial/Kconfig =================================================================== ---- linux-2.6.21.1.orig/drivers/serial/Kconfig -+++ linux-2.6.21.1/drivers/serial/Kconfig -@@ -256,6 +256,22 @@ config SERIAL_8250_AU1X00 +--- linux-2.6.22-rc6.orig/drivers/serial/Kconfig ++++ linux-2.6.22-rc6/drivers/serial/Kconfig +@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K comment "Non-8250 serial port support" diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch index f48b0f96c3..c862f906e3 100644 --- a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch +++ b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch @@ -1,20 +1,191 @@ -Index: linux-2.6.21.1/drivers/usb/core/hub.c +Index: linux-2.6.22-rc6/drivers/usb/core/hub.c =================================================================== ---- linux-2.6.21.1.orig/drivers/usb/core/hub.c -+++ linux-2.6.21.1/drivers/usb/core/hub.c -@@ -2227,6 +2227,8 @@ hub_port_init (struct usb_hub *hub, stru +--- linux-2.6.22-rc6.orig/drivers/usb/core/hub.c ++++ linux-2.6.22-rc6/drivers/usb/core/hub.c +@@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb + : (USB_ENDPOINT_XFER_BULK << 11); + if (usb_pipein (pipe)) + clear->devinfo |= 1 << 15; +- ++ + /* tell keventd to clear state for this TT */ + spin_lock_irqsave (&tt->lock, flags); + list_add_tail (&clear->clear_list, &tt->clear_list); +@@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub + "%s failed (err = %d)\n", __FUNCTION__, ret); + else { + *status = le16_to_cpu(hub->status->hub.wHubStatus); +- *change = le16_to_cpu(hub->status->hub.wHubChange); ++ *change = le16_to_cpu(hub->status->hub.wHubChange); + ret = 0; + } + mutex_unlock(&hub->status_mutex); +@@ -1424,7 +1424,7 @@ static int hub_port_status(struct usb_hu + ret = -EIO; + } else { + *status = le16_to_cpu(hub->status->port.wPortStatus); +- *change = le16_to_cpu(hub->status->port.wPortChange); ++ *change = le16_to_cpu(hub->status->port.wPortChange); + ret = 0; + } + mutex_unlock(&hub->status_mutex); +@@ -2007,7 +2007,7 @@ static inline int remote_wakeup(struct u + * Between connect detection and reset signaling there must be a delay + * of 100ms at least for debounce and power-settling. The corresponding + * timer shall restart whenever the downstream port detects a disconnect. +- * ++ * + * Apparently there are some bluetooth and irda-dongles and a number of + * low-speed devices for which this debounce period may last over a second. + * Not covered by the spec - but easy to deal with. +@@ -2142,7 +2142,7 @@ hub_port_init (struct usb_hub *hub, stru + goto fail; + } + oldspeed = udev->speed; +- ++ + /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ... + * it's fixed size except for full speed devices. + * For Wireless USB devices, ep0 max packet is always 512 (tho +@@ -2168,7 +2168,7 @@ hub_port_init (struct usb_hub *hub, stru + default: + goto fail; + } +- ++ + type = ""; + switch (udev->speed) { + case USB_SPEED_LOW: speed = "low"; break; +@@ -2194,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, stru + udev->tt = &hub->tt; + udev->ttport = port1; + } +- ++ + /* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way? + * Because device hardware and firmware is sometimes buggy in + * this area, and this is how Linux has done it for ages. +@@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru USB_DT_DEVICE << 8, 0, buf, GET_DESCRIPTOR_BUFSIZE, - (i ? USB_CTRL_GET_TIMEOUT : 1000)); + USB_CTRL_GET_TIMEOUT); +printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0, +buf->bDescriptorType, USB_DT_DEVICE); switch (buf->bMaxPacketSize0) { case 8: case 16: case 32: case 64: case 255: if (buf->bDescriptorType == -Index: linux-2.6.21.1/drivers/usb/host/Kconfig +@@ -2281,7 +2283,7 @@ hub_port_init (struct usb_hub *hub, stru + udev->devnum, retval); + goto fail; + } +- ++ + /* cope with hardware quirkiness: + * - let SET_ADDRESS settle, some device hardware wants it + * - read ep0 maxpacket even for high and low speed, +@@ -2318,7 +2320,7 @@ hub_port_init (struct usb_hub *hub, stru + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i); + ep0_reinit(udev); + } +- ++ + retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE); + if (retval < (signed)sizeof(udev->descriptor)) { + dev_err(&udev->dev, "device descriptor read/%s, error %d\n", +@@ -2416,7 +2418,7 @@ static void hub_port_connect_change(stru + struct device *hub_dev = hub->intfdev; + u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); + int status, i; +- ++ + dev_dbg (hub_dev, + "port %d, status %04x, change %04x, %s\n", + port1, portstatus, portchange, portspeed (portstatus)); +@@ -2425,7 +2427,7 @@ static void hub_port_connect_change(stru + set_port_led(hub, port1, HUB_LED_AUTO); + hub->indicator[port1-1] = INDICATOR_AUTO; + } +- ++ + /* Disconnect any existing devices under this port */ + if (hdev->children[port1-1]) + usb_disconnect(&hdev->children[port1-1]); +@@ -2455,7 +2457,7 @@ static void hub_port_connect_change(stru + if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 + && !(portstatus & (1 << USB_PORT_FEAT_POWER))) + set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); +- ++ + if (portstatus & USB_PORT_STAT_ENABLE) + goto done; + return; +@@ -2535,7 +2537,7 @@ static void hub_port_connect_change(stru + goto loop_disable; + } + } +- ++ + /* check for devices running slower than they could */ + if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200 + && udev->speed == USB_SPEED_FULL +@@ -2587,7 +2589,7 @@ loop: + if (status == -ENOTCONN) + break; + } +- ++ + done: + hub_port_disable(hub, port1, 1); + } +@@ -2720,7 +2722,7 @@ static void hub_events(void) + * EM interference sometimes causes badly + * shielded USB devices to be shutdown by + * the hub, this hack enables them again. +- * Works at least with mouse driver. ++ * Works at least with mouse driver. + */ + if (!(portstatus & USB_PORT_STAT_ENABLE) + && !connect_change +@@ -2750,7 +2752,7 @@ static void hub_events(void) + "resume on port %d, status %d\n", + i, ret); + } +- ++ + if (portchange & USB_PORT_STAT_C_OVERCURRENT) { + dev_err (hub_dev, + "over-current change on port %d\n", +@@ -2985,7 +2987,7 @@ int usb_reset_device(struct usb_device * + + if (ret < 0) + goto re_enumerate; +- ++ + /* Device might have changed firmware (DFU or similar) */ + if (memcmp(&udev->descriptor, &descriptor, sizeof descriptor) + || config_descriptors_changed (udev)) { +@@ -2993,7 +2995,7 @@ int usb_reset_device(struct usb_device * + udev->descriptor = descriptor; /* for disconnect() calls */ + goto re_enumerate; + } +- ++ + if (!udev->actconfig) + goto done; + +@@ -3031,7 +3033,7 @@ int usb_reset_device(struct usb_device * + + done: + return 0; +- ++ + re_enumerate: + hub_port_logical_disconnect(parent_hub, port1); + return -ENODEV; +Index: linux-2.6.22-rc6/drivers/usb/host/Kconfig =================================================================== ---- linux-2.6.21.1.orig/drivers/usb/host/Kconfig -+++ linux-2.6.21.1/drivers/usb/host/Kconfig +--- linux-2.6.22-rc6.orig/drivers/usb/host/Kconfig ++++ linux-2.6.22-rc6/drivers/usb/host/Kconfig @@ -224,3 +224,6 @@ config USB_SL811_CS To compile this driver as a module, choose M here: the module will be called "sl811_cs". @@ -22,35 +193,38 @@ Index: linux-2.6.21.1/drivers/usb/host/Kconfig +config USB_ADM5120_HCD + tristate "ADM5120 HCD support" + depends on USB && MIPS_ADM5120 -Index: linux-2.6.21.1/drivers/usb/host/Makefile +Index: linux-2.6.22-rc6/drivers/usb/host/Makefile =================================================================== ---- linux-2.6.21.1.orig/drivers/usb/host/Makefile -+++ linux-2.6.21.1/drivers/usb/host/Makefile -@@ -16,3 +16,4 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd - obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o - obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o - obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o +--- linux-2.6.22-rc6.orig/drivers/usb/host/Makefile ++++ linux-2.6.22-rc6/drivers/usb/host/Makefile +@@ -8,6 +8,7 @@ endif + + obj-$(CONFIG_PCI) += pci-quirks.o + +obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o -Index: linux-2.6.21.1/drivers/usb/Kconfig + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o + obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o + obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o +Index: linux-2.6.22-rc6/drivers/usb/Kconfig =================================================================== ---- linux-2.6.21.1.orig/drivers/usb/Kconfig -+++ linux-2.6.21.1/drivers/usb/Kconfig -@@ -91,8 +91,6 @@ source "drivers/usb/image/Kconfig" +--- linux-2.6.22-rc6.orig/drivers/usb/Kconfig ++++ linux-2.6.22-rc6/drivers/usb/Kconfig +@@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig" - source "drivers/usb/net/Kconfig" + source "drivers/usb/image/Kconfig" -source "drivers/usb/mon/Kconfig" - comment "USB port drivers" depends on USB -Index: linux-2.6.21.1/drivers/usb/Makefile +Index: linux-2.6.22-rc6/drivers/usb/Makefile =================================================================== ---- linux-2.6.21.1.orig/drivers/usb/Makefile -+++ linux-2.6.21.1/drivers/usb/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ +--- linux-2.6.22-rc6.orig/drivers/usb/Makefile ++++ linux-2.6.22-rc6/drivers/usb/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ + obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ - obj-$(CONFIG_ETRAX_USB_HOST) += host/ obj-$(CONFIG_USB_OHCI_AT91) += host/ +obj-$(CONFIG_USB_ADM5120_HCD) += host/ diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch b/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch index ac654a017e..91ca638ded 100644 --- a/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch +++ b/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch @@ -1,8 +1,8 @@ -Index: linux-2.6.21.1/drivers/leds/Kconfig +Index: linux-2.6.22-rc6/drivers/leds/Kconfig =================================================================== ---- linux-2.6.21.1.orig/drivers/leds/Kconfig -+++ linux-2.6.21.1/drivers/leds/Kconfig -@@ -19,6 +19,27 @@ config LEDS_CLASS +--- linux-2.6.22-rc6.orig/drivers/leds/Kconfig ++++ linux-2.6.22-rc6/drivers/leds/Kconfig +@@ -20,6 +20,27 @@ config LEDS_CLASS comment "LED drivers" @@ -30,10 +30,10 @@ Index: linux-2.6.21.1/drivers/leds/Kconfig config LEDS_CORGI tristate "LED Support for the Sharp SL-C7x0 series" depends on LEDS_CLASS && PXA_SHARP_C7xx -Index: linux-2.6.21.1/drivers/leds/Makefile +Index: linux-2.6.22-rc6/drivers/leds/Makefile =================================================================== ---- linux-2.6.21.1.orig/drivers/leds/Makefile -+++ linux-2.6.21.1/drivers/leds/Makefile +--- linux-2.6.22-rc6.orig/drivers/leds/Makefile ++++ linux-2.6.22-rc6/drivers/leds/Makefile @@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch index 1098a24ba8..18839cf362 100644 --- a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch +++ b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch @@ -1,17 +1,17 @@ -Index: linux-2.6.21.1/arch/mips/pci/Makefile +Index: linux-2.6.22-rc6/arch/mips/pci/Makefile =================================================================== ---- linux-2.6.21.1.orig/arch/mips/pci/Makefile -+++ linux-2.6.21.1/arch/mips/pci/Makefile -@@ -53,3 +53,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- +--- linux-2.6.22-rc6.orig/arch/mips/pci/Makefile ++++ linux-2.6.22-rc6/arch/mips/pci/Makefile +@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o +obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o -Index: linux-2.6.21.1/include/linux/pci_ids.h +Index: linux-2.6.22-rc6/include/linux/pci_ids.h =================================================================== ---- linux-2.6.21.1.orig/include/linux/pci_ids.h -+++ linux-2.6.21.1/include/linux/pci_ids.h -@@ -1701,6 +1701,9 @@ +--- linux-2.6.22-rc6.orig/include/linux/pci_ids.h ++++ linux-2.6.22-rc6/include/linux/pci_ids.h +@@ -1712,6 +1712,9 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 diff --git a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch index 6b0fe55edf..c0fd645b5d 100644 --- a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch +++ b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch @@ -1,6 +1,8 @@ ---- linux-2.6.19.2/include/asm-mips/byteorder.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/include/asm-mips/byteorder.h 2007-05-16 21:14:47.000000000 +0200 -@@ -58,6 +58,35 @@ +Index: linux-2.6.22-rc6/include/asm-mips/byteorder.h +=================================================================== +--- linux-2.6.22-rc6.orig/include/asm-mips/byteorder.h ++++ linux-2.6.22-rc6/include/asm-mips/byteorder.h +@@ -58,6 +58,35 @@ static __inline__ __attribute_const__ __ #endif /* CONFIG_CPU_MIPSR2 */ diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch index 88b90454a8..2b4381cd98 100644 --- a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch +++ b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch @@ -1,8 +1,8 @@ -Index: linux-2.6.21.1/drivers/mtd/Kconfig +Index: linux-2.6.22-rc6/drivers/mtd/Kconfig =================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/Kconfig -+++ linux-2.6.21.1/drivers/mtd/Kconfig -@@ -157,6 +157,22 @@ config MTD_AFS_PARTS +--- linux-2.6.22-rc6.orig/drivers/mtd/Kconfig ++++ linux-2.6.22-rc6/drivers/mtd/Kconfig +@@ -155,6 +155,22 @@ config MTD_AFS_PARTS for your particular device. It won't happen automatically. The 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. @@ -23,13 +23,13 @@ Index: linux-2.6.21.1/drivers/mtd/Kconfig + for your particular device. It won't happen automatically. + comment "User Modules And Translation Layers" - depends on MTD -Index: linux-2.6.21.1/drivers/mtd/Makefile + config MTD_CHAR +Index: linux-2.6.22-rc6/drivers/mtd/Makefile =================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/Makefile -+++ linux-2.6.21.1/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o +--- linux-2.6.22-rc6.orig/drivers/mtd/Makefile ++++ linux-2.6.22-rc6/drivers/mtd/Makefile +@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o diff --git a/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch b/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch index 58b6dff1f2..543cb940a4 100644 --- a/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch +++ b/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch @@ -1,7 +1,7 @@ -Index: linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c +Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c =================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/chips/cfi_cmdset_0002.c -+++ linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c +--- linux-2.6.22-rc6.orig/drivers/mtd/chips/cfi_cmdset_0002.c ++++ linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c @@ -47,12 +47,17 @@ #define MANUFACTURER_AMD 0x0001 #define MANUFACTURER_ATMEL 0x001F @@ -66,11 +66,11 @@ Index: linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c { 0, 0, NULL, NULL } }; static struct cfi_fixup jedec_fixup_table[] = { -Index: linux-2.6.21.1/drivers/mtd/chips/Kconfig +Index: linux-2.6.22-rc6/drivers/mtd/chips/Kconfig =================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/chips/Kconfig -+++ linux-2.6.21.1/drivers/mtd/chips/Kconfig -@@ -199,6 +199,14 @@ config MTD_CFI_AMDSTD +--- linux-2.6.22-rc6.orig/drivers/mtd/chips/Kconfig ++++ linux-2.6.22-rc6/drivers/mtd/chips/Kconfig +@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD provides support for one of those command sets, used on chips including the AMD Am29LV320. diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch index d5edc23dce..47378e5a90 100644 --- a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch +++ b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch @@ -1,7 +1,7 @@ -Index: linux-2.6.21.1/arch/mips/kernel/head.S +Index: linux-2.6.22-rc6/arch/mips/kernel/head.S =================================================================== ---- linux-2.6.21.1.orig/arch/mips/kernel/head.S -+++ linux-2.6.21.1/arch/mips/kernel/head.S +--- linux-2.6.22-rc6.orig/arch/mips/kernel/head.S ++++ linux-2.6.22-rc6/arch/mips/kernel/head.S @@ -129,14 +129,19 @@ #endif .endm diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch index 8929a73fbb..fb503c5dcf 100644 --- a/target/linux/adm5120-2.6/patches/500-Nand.patch +++ b/target/linux/adm5120-2.6/patches/500-Nand.patch @@ -1,8 +1,8 @@ -Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig +Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig =================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/nand/Kconfig -+++ linux-2.6.21.1/drivers/mtd/nand/Kconfig -@@ -75,6 +75,12 @@ config MTD_NAND_TS7250 +--- linux-2.6.22-rc6.orig/drivers/mtd/nand/Kconfig ++++ linux-2.6.22-rc6/drivers/mtd/nand/Kconfig +@@ -81,6 +81,12 @@ config MTD_NAND_TS7250 help Support for NAND flash on Technologic Systems TS-7250 platform. @@ -15,10 +15,10 @@ Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig config MTD_NAND_IDS tristate -Index: linux-2.6.21.1/drivers/mtd/nand/Makefile +Index: linux-2.6.22-rc6/drivers/mtd/nand/Makefile =================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/nand/Makefile -+++ linux-2.6.21.1/drivers/mtd/nand/Makefile +--- linux-2.6.22-rc6.orig/drivers/mtd/nand/Makefile ++++ linux-2.6.22-rc6/drivers/mtd/nand/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan obj-$(CONFIG_MTD_NAND_SPIA) += spia.o obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o |