[lantiq] drop unmaintained packages

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33723 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 812 deletions

diff --git a/package/uboot-lantiq/files/board/arcadyan/athrs26_phy.c b/package/uboot-lantiq/files/board/arcadyan/athrs26_phy.c
deleted file mode 100644
index 663c4aa201..0000000000
--- a/package/uboot-lantiq/files/board/arcadyan/athrs26_phy.c
+++ /dev/null
@@ -1,812 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
- */
-
-/*
- * Manage the atheros ethernet PHY.
- *
- * All definitions in this file are operating system independent!
- */
-
-#include <config.h>
-#include <linux/types.h>
-#include <common.h>
-#include <miiphy.h>
-//#include "phy.h"
-//#include "ar7100_soc.h"
-#include "athrs26_phy.h"
-
-#define phy_reg_read(base, addr, reg, datap)                    \
-    miiphy_read("lq_cpe_eth", addr, reg, datap);
-#define phy_reg_write(base, addr, reg, data)                   \
-    miiphy_write("lq_cpe_eth", addr, reg, data);
-            
-
-/* PHY selections and access functions */
-
-typedef enum {
-    PHY_SRCPORT_INFO, 
-    PHY_PORTINFO_SIZE,
-} PHY_CAP_TYPE;
-
-typedef enum {
-    PHY_SRCPORT_NONE,
-    PHY_SRCPORT_VLANTAG, 
-    PHY_SRCPORT_TRAILER,
-} PHY_SRCPORT_TYPE;
-
-#ifdef DEBUG
-#define DRV_DEBUG 1
-#endif
-//#define DRV_DEBUG 1
-
-#define DRV_DEBUG_PHYERROR  0x00000001
-#define DRV_DEBUG_PHYCHANGE 0x00000002
-#define DRV_DEBUG_PHYSETUP  0x00000004
-
-#if DRV_DEBUG
-int athrPhyDebug = DRV_DEBUG_PHYERROR|DRV_DEBUG_PHYCHANGE|DRV_DEBUG_PHYSETUP;
-
-#define DRV_LOG(FLG, X0, X1, X2, X3, X4, X5, X6)    \
-{                                                   \
-    if (athrPhyDebug & (FLG)) {                       \
-        logMsg(X0, X1, X2, X3, X4, X5, X6);         \
-    }                                               \
-}
-
-#define DRV_MSG(x,a,b,c,d,e,f)                      \
-    logMsg(x,a,b,c,d,e,f)
-
-#define DRV_PRINT(FLG, X)                           \
-{                                                   \
-    if (athrPhyDebug & (FLG)) {                       \
-        printf X;                                   \
-    }                                               \
-}
-
-#else /* !DRV_DEBUG */
-#define DRV_LOG(DBG_SW, X0, X1, X2, X3, X4, X5, X6)
-#define DRV_MSG(x,a,b,c,d,e,f)
-#define DRV_PRINT(DBG_SW,X)
-#endif
-
-#define ATHR_LAN_PORT_VLAN          1
-#define ATHR_WAN_PORT_VLAN          2
-
-#define ENET_UNIT_LAN 0
-
-#define TRUE    1
-#define FALSE   0
-
-#define ATHR_PHY0_ADDR   0x0
-#define ATHR_PHY1_ADDR   0x1
-#define ATHR_PHY2_ADDR   0x2
-#define ATHR_PHY3_ADDR   0x3
-#define ATHR_PHY4_ADDR   0x4
-
-/*
- * Track per-PHY port information.
- */
-typedef struct {
-    BOOL   isEnetPort;       /* normal enet port */
-    BOOL   isPhyAlive;       /* last known state of link */
-    int    ethUnit;          /* MAC associated with this phy port */
-    uint32_t phyBase;
-    uint32_t phyAddr;          /* PHY registers associated with this phy port */
-    uint32_t VLANTableSetting; /* Value to be written to VLAN table */
-} athrPhyInfo_t;
-
-/*
- * Per-PHY information, indexed by PHY unit number.
- */
-static athrPhyInfo_t athrPhyInfo[] = {
-    {TRUE,   /* phy port 0 -- LAN port 0 */
-     FALSE,
-     ENET_UNIT_LAN,
-     0,
-     ATHR_PHY0_ADDR,
-     ATHR_LAN_PORT_VLAN
-    },
-
-    {TRUE,   /* phy port 1 -- LAN port 1 */
-     FALSE,
-     ENET_UNIT_LAN,
-     0,
-     ATHR_PHY1_ADDR,
-     ATHR_LAN_PORT_VLAN
-    },
-
-    {TRUE,   /* phy port 2 -- LAN port 2 */
-     FALSE,
-     ENET_UNIT_LAN,
-     0,
-     ATHR_PHY2_ADDR, 
-     ATHR_LAN_PORT_VLAN
-    },
-
-    {TRUE,   /* phy port 3 -- LAN port 3 */
-     FALSE,
-     ENET_UNIT_LAN,
-     0,
-     ATHR_PHY3_ADDR, 
-     ATHR_LAN_PORT_VLAN
-    },
-
-    {TRUE,   /* phy port 4 -- WAN port or LAN port 4 */
-     FALSE,
-     1,
-     0,
-     ATHR_PHY4_ADDR, 
-     ATHR_LAN_PORT_VLAN   /* Send to all ports */
-    },
-
-    {FALSE,  /* phy port 5 -- CPU port (no RJ45 connector) */
-     TRUE,
-     ENET_UNIT_LAN,
-     0,
-     0x00, 
-     ATHR_LAN_PORT_VLAN    /* Send to all ports */
-    },
-};
-
-#ifdef CFG_ATHRHDR_EN
-typedef struct {
-    uint8_t data[ATHRHDR_MAX_DATA];
-    uint8_t len;
-    uint32_t seq;
-} cmd_resp_t;
-
-typedef struct {
- uint16_t reg_addr;
- uint16_t cmd_len;
- uint8_t *reg_data;
-}cmd_write_t;
-
-static cmd_write_t cmd_write,cmd_read;
-static cmd_resp_t cmd_resp;
-static struct eth_device *lan_mac;
-//static atomic_t seqcnt = ATOMIC_INIT(0);
-static int  seqcnt = 0;
-static int cmd = 1;
-//volatile uchar AthrHdrPkt[60];
-#endif
-
-#define ATHR_GLOBALREGBASE    0
-
-//#define ATHR_PHY_MAX (sizeof(athrPhyInfo) / sizeof(athrPhyInfo[0]))
-#define ATHR_PHY_MAX 5
-
-/* Range of valid PHY IDs is [MIN..MAX] */
-#define ATHR_ID_MIN 0
-#define ATHR_ID_MAX (ATHR_PHY_MAX-1)
-
-/* Convenience macros to access myPhyInfo */
-#define ATHR_IS_ENET_PORT(phyUnit) (athrPhyInfo[phyUnit].isEnetPort)
-#define ATHR_IS_PHY_ALIVE(phyUnit) (athrPhyInfo[phyUnit].isPhyAlive)
-#define ATHR_ETHUNIT(phyUnit) (athrPhyInfo[phyUnit].ethUnit)
-#define ATHR_PHYBASE(phyUnit) (athrPhyInfo[phyUnit].phyBase)
-#define ATHR_PHYADDR(phyUnit) (athrPhyInfo[phyUnit].phyAddr)
-#define ATHR_VLAN_TABLE_SETTING(phyUnit) (athrPhyInfo[phyUnit].VLANTableSetting)
-
-
-#define ATHR_IS_ETHUNIT(phyUnit, ethUnit) \
-            (ATHR_IS_ENET_PORT(phyUnit) &&        \
-            ATHR_ETHUNIT(phyUnit) == (ethUnit))
-
-#define ATHR_IS_WAN_PORT(phyUnit) (!(ATHR_ETHUNIT(phyUnit)==ENET_UNIT_LAN))
-            
-/* Forward references */
-BOOL       athrs26_phy_is_link_alive(int phyUnit);
-//static uint32_t athrs26_reg_read(uint16_t reg_addr);
-static void athrs26_reg_write(uint16_t reg_addr, 
-                              uint32_t reg_val);
-
-/******************************************************************************
-*
-* athrs26_phy_is_link_alive - test to see if the specified link is alive
-*
-* RETURNS:
-*    TRUE  --> link is alive
-*    FALSE --> link is down
-*/
-
-void athrs26_reg_init(void)
-{
-
-    athrs26_reg_write(0x200, 0x200);
-    athrs26_reg_write(0x300, 0x200);
-    athrs26_reg_write(0x400, 0x200);
-    athrs26_reg_write(0x500, 0x200);
-    athrs26_reg_write(0x600, 0x7d);
-
-#ifdef S26_VER_1_0
-    phy_reg_write(0, 0, 29, 41);
-    phy_reg_write(0, 0, 30, 0);
-    phy_reg_write(0, 1, 29, 41);
-    phy_reg_write(0, 1, 30, 0);
-    phy_reg_write(0, 2, 29, 41);
-    phy_reg_write(0, 2, 30, 0);
-    phy_reg_write(0, 3, 29, 41);
-    phy_reg_write(0, 3, 30, 0);
-    phy_reg_write(0, 4, 29, 41);
-    phy_reg_write(0, 4, 30, 0);
-#endif
-
-    athrs26_reg_write(0x38, 0xc000050e);
-
-#ifdef CFG_ATHRHDR_EN
-    athrs26_reg_write(0x104, 0x4804);
-#else
-    athrs26_reg_write(0x104, 0x4004);
-#endif
-
-    athrs26_reg_write(0x60, 0xffffffff);
-    athrs26_reg_write(0x64, 0xaaaaaaaa);
-    athrs26_reg_write(0x68, 0x55555555);
-    athrs26_reg_write(0x6c, 0x0);
-
-    athrs26_reg_write(0x70, 0x41af);
-}
-
-BOOL
-athrs26_phy_is_link_alive(int phyUnit)
-{
-    uint16_t phyHwStatus;
-    uint32_t phyBase;
-    uint32_t phyAddr;
-
-    phyBase = ATHR_PHYBASE(phyUnit);
-    phyAddr = ATHR_PHYADDR(phyUnit);
-
-    phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
-
-    if (phyHwStatus & ATHR_STATUS_LINK_PASS)
-        return TRUE;
-
-    return FALSE;
-}
-
-
-/******************************************************************************
-*
-* athrs26_phy_setup - reset and setup the PHY associated with
-* the specified MAC unit number.
-*
-* Resets the associated PHY port.
-*
-* RETURNS:
-*    TRUE  --> associated PHY is alive
-*    FALSE --> no LINKs on this ethernet unit
-*/
-
-BOOL
-athrs26_phy_setup(int ethUnit)
-{
-    int         phyUnit;
-    uint16_t    phyHwStatus;
-    uint16_t    timeout;
-    int         liveLinks = 0;
-    uint32_t    phyBase = 0;
-    BOOL        foundPhy = FALSE;
-    uint32_t  phyAddr = 0;
-    uint32_t  regVal;
-    
-
-    /* See if there's any configuration data for this enet */
-    /* start auto negogiation on each phy */
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-			continue;
-        }
-
-
-        foundPhy = TRUE;
-        phyBase = ATHR_PHYBASE(phyUnit);
-        phyAddr = ATHR_PHYADDR(phyUnit);
-
-        phy_reg_write(phyBase, phyAddr, ATHR_AUTONEG_ADVERT,
-                      ATHR_ADVERTISE_ALL);
-
-        /* Reset PHYs*/
-        phy_reg_write(phyBase, phyAddr, ATHR_PHY_CONTROL,
-                      ATHR_CTRL_AUTONEGOTIATION_ENABLE
-                      | ATHR_CTRL_SOFTWARE_RESET);
-
-	}
-
-    if (!foundPhy) {
-        return FALSE; /* No PHY's configured for this ethUnit */
-    }
-
-    /*
-     * After the phy is reset, it takes a little while before
-     * it can respond properly.
-     */
-    sysMsDelay(1000);
-    
-    /*
-     * Wait up to .75 seconds for ALL associated PHYs to finish
-     * autonegotiation.  The only way we get out of here sooner is
-     * if ALL PHYs are connected AND finish autonegotiation.
-     */
-    for (phyUnit=0; (phyUnit < ATHR_PHY_MAX) /*&& (timeout > 0) */; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        timeout=20;
-        for (;;) {
-			phyHwStatus = 0;
-            phy_reg_read(phyBase, phyAddr, ATHR_PHY_CONTROL, &phyHwStatus);
-
-		if (ATHR_RESET_DONE(phyHwStatus)) {
-                DRV_PRINT(DRV_DEBUG_PHYSETUP,
-                          ("Port %d, Neg Success\n", phyUnit));
-                break;
-            }
-            if (timeout == 0) {
-                DRV_PRINT(DRV_DEBUG_PHYSETUP,
-                          ("Port %d, Negogiation timeout\n", phyUnit));
-                break;
-            }
-            if (--timeout == 0) {
-                DRV_PRINT(DRV_DEBUG_PHYSETUP,
-                          ("Port %d, Negogiation timeout\n", phyUnit));
-                break;
-            }
-
-            sysMsDelay(150);
-        }
-    }
-
-	/*
-     * All PHYs have had adequate time to autonegotiate.
-     * Now initialize software status.
-     *
-     * It's possible that some ports may take a bit longer
-     * to autonegotiate; but we can't wait forever.  They'll
-     * get noticed by mv_phyCheckStatusChange during regular
-     * polling activities.
-     */
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        if (athrs26_phy_is_link_alive(phyUnit)) {
-            liveLinks++;
-            ATHR_IS_PHY_ALIVE(phyUnit) = TRUE;
-        } else {
-            ATHR_IS_PHY_ALIVE(phyUnit) = FALSE;
-        }
-
-        phy_reg_read(ATHR_PHYBASE(phyUnit), ATHR_PHYADDR(phyUnit), 
-                    ATHR_PHY_SPEC_STATUS, &regVal);
-        DRV_PRINT(DRV_DEBUG_PHYSETUP,
-            ("eth%d: Phy Specific Status=%4.4x\n", ethUnit, regVal)); 
-    }
-#if 0
-    /* if using header for register configuration, we have to     */
-    /* configure s26 register after frame transmission is enabled */
-
-    athrs26_reg_write(0x200, 0x200);
-    athrs26_reg_write(0x300, 0x200);
-    athrs26_reg_write(0x400, 0x200);
-    athrs26_reg_write(0x500, 0x200);
-    athrs26_reg_write(0x600, 0x200);
-	athrs26_reg_write(0x38, 0x50e);
-#endif
-#ifndef CFG_ATHRHDR_EN       
-/* if using header for register configuration, we have to     */
-    /* configure s26 register after frame transmission is enabled */
-        athrs26_reg_init();
-#endif
-    
-    return (liveLinks > 0);
-}
-
-/******************************************************************************
-*
-* athrs26_phy_is_fdx - Determines whether the phy ports associated with the
-* specified device are FULL or HALF duplex.
-*
-* RETURNS:
-*    1  --> FULL
-*    0 --> HALF
-*/
-int
-athrs26_phy_is_fdx(int ethUnit)
-{
-    int         phyUnit;
-    uint32_t    phyBase;
-    uint32_t    phyAddr;
-    uint16_t    phyHwStatus;
-    int         ii = 200;
-    
-    if (ethUnit == ENET_UNIT_LAN)
-        return TRUE;
-    
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        if (athrs26_phy_is_link_alive(phyUnit)) {
-
-            phyBase = ATHR_PHYBASE(phyUnit);
-            phyAddr = ATHR_PHYADDR(phyUnit);
-
-            do {
-                phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
-        	    sysMsDelay(10);
-            } while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii);
-
-            if (phyHwStatus & ATHER_STATUS_FULL_DEPLEX)
-                return TRUE;
-        }
-    }
-
-    return FALSE;
-}
-
-
-/******************************************************************************
-*
-* athrs26_phy_speed - Determines the speed of phy ports associated with the
-* specified device.
-*
-* RETURNS:
-*               AG7100_PHY_SPEED_10T, AG7100_PHY_SPEED_100TX;
-*               AG7100_PHY_SPEED_1000T;
-*/
-
-BOOL
-athrs26_phy_speed(int ethUnit)
-{
-    int         phyUnit;
-    uint16_t    phyHwStatus;
-    uint32_t    phyBase;
-    uint32_t    phyAddr;
-    int         ii = 200;
-    
-    if (ethUnit == ENET_UNIT_LAN)
-        return _100BASET;
-
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        if (athrs26_phy_is_link_alive(phyUnit)) {
-
-            phyBase = ATHR_PHYBASE(phyUnit);
-            phyAddr = ATHR_PHYADDR(phyUnit);
-            
-            do {
-                phy_reg_read(phyBase, phyAddr, 
-                                           ATHR_PHY_SPEC_STATUS, &phyHwStatus);
-                sysMsDelay(10);
-            }while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii);
-
-            phyHwStatus = ((phyHwStatus & ATHER_STATUS_LINK_MASK) >>
-                           ATHER_STATUS_LINK_SHIFT);
-
-            switch(phyHwStatus) {
-            case 0:
-                return _10BASET;
-            case 1:
-                return _100BASET;
-            case 2:
-                return _1000BASET;
-            default:
-                DRV_PRINT(DRV_DEBUG_PHYERROR, ("Unkown speed read!\n"));
-            }
-        }
-    }
-
-    return _10BASET;
-}
-
-/*****************************************************************************
-*
-* athr_phy_is_up -- checks for significant changes in PHY state.
-*
-* A "significant change" is:
-*     dropped link (e.g. ethernet cable unplugged) OR
-*     autonegotiation completed + link (e.g. ethernet cable plugged in)
-*
-* When a PHY is plugged in, phyLinkGained is called.
-* When a PHY is unplugged, phyLinkLost is called.
-*/
-
-int
-athrs26_phy_is_up(int ethUnit)
-{
-    int             phyUnit;
-    uint16_t        phyHwStatus;
-    athrPhyInfo_t  *lastStatus;
-    int             linkCount   = 0;
-    int             lostLinks   = 0;
-    int             gainedLinks = 0;
-    uint32_t        phyBase;
-    uint32_t        phyAddr;
-#ifdef CFG_ATHRHDR_REG
-    /* if using header to config s26, the link of MAC0 should always be up */
-    if (ethUnit == ENET_UNIT_LAN)
-        return 1;
-#endif
-
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        phyBase = ATHR_PHYBASE(phyUnit);
-        phyAddr = ATHR_PHYADDR(phyUnit);
-
-
-        lastStatus = &athrPhyInfo[phyUnit];
-        phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
-
-        if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */
-            /* See if we've lost link */
-            if (phyHwStatus & ATHR_STATUS_LINK_PASS) {
-                linkCount++;
-            } else {
-                lostLinks++;
-                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d down\n",
-                                               ethUnit, phyUnit));
-                lastStatus->isPhyAlive = FALSE;
-            }
-        } else { /* last known link status was DEAD */
-            /* Check for reset complete */
-            phy_reg_read(phyBase, phyAddr, ATHR_PHY_STATUS, &phyHwStatus);
-            if (!ATHR_RESET_DONE(phyHwStatus))
-                continue;
-
-            /* Check for AutoNegotiation complete */            
-            if (ATHR_AUTONEG_DONE(phyHwStatus)) {
-                //printk("autoneg done\n");
-                gainedLinks++;
-                linkCount++;
-                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d up\n",
-                                               ethUnit, phyUnit));
-                lastStatus->isPhyAlive = TRUE;
-            }
-        }
-    }
-
-    return (linkCount);
-
-#if 0
-    if (linkCount == 0) {
-        if (lostLinks) {
-            /* We just lost the last link for this MAC */
-            phyLinkLost(ethUnit);
-        }
-    } else {
-        if (gainedLinks == linkCount) {
-            /* We just gained our first link(s) for this MAC */
-            phyLinkGained(ethUnit);
-        }
-    }
-#endif
-}
-
-#ifdef CFG_ATHRHDR_EN
-void athr_hdr_timeout(void){
-	eth_halt();
-        NetState = NETLOOP_FAIL; 
-}
-
-void athr_hdr_handler(uchar *recv_pkt, unsigned dest, unsigned src, unsigned len){
-	header_receive_pkt(recv_pkt);
-	NetState = NETLOOP_SUCCESS;
-}
-static int
-athrs26_header_config_reg (struct eth_device *dev, uint8_t wr_flag,
-                           uint16_t reg_addr, uint16_t cmd_len,
-                           uint8_t *val)
-{
-    at_header_t at_header;
-    reg_cmd_t reg_cmd;
-    uchar *AthrHdrPkt;
-
-    AthrHdrPkt = NetTxPacket;
-
-    if(AthrHdrPkt == NULL) {
-		printf("Null packet\n");
-		return;
-    }
-    memset(AthrHdrPkt,0,60);
-
-    /*fill at_header*/
-    at_header.reserved0 = 0x10;  //default
-    at_header.priority = 0;
-    at_header.type = 0x5;
-    at_header.broadcast = 0;
-    at_header.from_cpu = 1;
-    at_header.reserved1 = 0x01; //default
-    at_header.port_num = 0;
-
-    AthrHdrPkt[0] = at_header.port_num;
-    AthrHdrPkt[0] |= at_header.reserved1 << 4;
-    AthrHdrPkt[0] |= at_header.from_cpu << 6;
-    AthrHdrPkt[0] |= at_header.broadcast << 7;
-
-    AthrHdrPkt[1] = at_header.type;
-    AthrHdrPkt[1] |= at_header.priority << 4;
-    AthrHdrPkt[1] |= at_header.reserved0 << 6;
-
-
-    /*fill reg cmd*/
-    if(cmd_len > 4)
-        cmd_len = 4;//only support 32bits register r/w
-
-    reg_cmd.reg_addr = reg_addr&0x3FFFC;
-    reg_cmd.cmd_len = cmd_len;
-    reg_cmd.cmd = wr_flag;
-    reg_cmd.reserved2 = 0x5; //default
-    reg_cmd.seq_num = seqcnt;
-
-    AthrHdrPkt[2] = reg_cmd.reg_addr & 0xff;
-    AthrHdrPkt[3] = (reg_cmd.reg_addr & 0xff00) >> 8;
-    AthrHdrPkt[4] = (reg_cmd.reg_addr & 0x30000) >> 16;
-    AthrHdrPkt[4] |= reg_cmd.cmd_len << 4;
-    AthrHdrPkt[5] = reg_cmd.cmd << 4;
-    AthrHdrPkt[5] |= reg_cmd.reserved2 << 5;
-    AthrHdrPkt[6] = (reg_cmd.seq_num & 0x7f) << 1;
-    AthrHdrPkt[7] = (reg_cmd.seq_num & 0x7f80) >> 7;
-    AthrHdrPkt[8] = (reg_cmd.seq_num & 0x7f8000) >> 15;
-    AthrHdrPkt[9] = (reg_cmd.seq_num & 0x7f800000) >> 23;
-
-    /*fill reg data*/
-    if(!wr_flag)//write
-        memcpy((AthrHdrPkt + 10), val, cmd_len);
-    
-    /*start xmit*/
-    if(dev == NULL) {
-	printf("ERROR device not found\n");
-	return -1;
-    }
-    header_xmit(dev, AthrHdrPkt ,60);
-    return 0;
-}
-void athr_hdr_func(void) {
-
-   NetSetTimeout (1 * CFG_HZ,athr_hdr_timeout );
-   NetSetHandler (athr_hdr_handler);
-
-   if(cmd) 
-   	athrs26_header_config_reg(lan_mac, cmd, cmd_read.reg_addr, cmd_read.cmd_len, cmd_read.reg_data);
-   else 
-        athrs26_header_config_reg(lan_mac, cmd, cmd_write.reg_addr, cmd_write.cmd_len, cmd_write.reg_data);
-}
-static int
-athrs26_header_write_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data)
-{
-    int i = 2;
-    cmd_write.reg_addr = reg_addr;
-    cmd_write.cmd_len = cmd_len;
-    cmd_write.reg_data = reg_data;
-    cmd = 0;
-    seqcnt++;
-
-    do {
-	if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */
-	   break;
-    } while (i--);
-
-    return i;
-}
-
-static int
-athrs26_header_read_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data)
-{
-    int i = 2;
-
-    cmd_read.reg_addr = reg_addr;
-    cmd_read.cmd_len = cmd_len;
-    cmd_read.reg_data = reg_data;
-    cmd = 1;
-    seqcnt++;
-
-    do {
-        if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */
-           break;
-    } while (i--);
-
-    if ((i==0) || (seqcnt != cmd_resp.seq) || (cmd_len != cmd_resp.len)) {
-        return -1;
-    }
-    memcpy (cmd_read.reg_data, cmd_resp.data, cmd_len);
-    return 0;
-}
-int header_receive_pkt(uchar *recv_pkt)
-{
-    cmd_resp.len = recv_pkt[4] >> 4;
-    if (cmd_resp.len > 10)
-        goto out;
-
-    cmd_resp.seq = recv_pkt[6] >> 1;
-    cmd_resp.seq |= recv_pkt[7] << 7;
-    cmd_resp.seq |= recv_pkt[8] << 15;
-    cmd_resp.seq |= recv_pkt[9] << 23;
-
-    if (cmd_resp.seq < seqcnt)
-        goto out;
-    memcpy (cmd_resp.data, (recv_pkt + 10), cmd_resp.len);
-out:
-     return 0;
-}
-
-void athrs26_reg_dev(struct eth_device *mac)
-{
-    lan_mac = mac;
-}
-
-#endif
-
-/*static uint32_t
-athrs26_reg_read(uint16_t reg_addr)
-{
-#ifndef CFG_ATHRHDR_REG
-    uint16_t reg_word_addr = reg_addr / 2, phy_val;
-    uint32_t phy_addr;
-    uint8_t phy_reg; 
-    
-    phy_addr = 0x18;
-    phy_reg = 0x0;
-    phy_val = (reg_word_addr >> 8) & 0x1ff;        
-    phy_reg_write (0, phy_addr, phy_reg, phy_val);
-
-    phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); 
-    phy_reg = reg_word_addr & 0x1f;            
-    phy_reg_read(0, phy_addr, phy_reg, &phy_val);
-    
-    return phy_val;
-#else
-    uint8_t reg_data[4];
-
-    memset (reg_data, 0, 4);
-    athrs26_header_read_reg(reg_addr, 4, reg_data);
-    return (reg_data[0] | (reg_data[1] << 8) | (reg_data[2] << 16) | (reg_data[3] << 24));
-#endif
-}
-*/
-static void
-athrs26_reg_write(uint16_t reg_addr, uint32_t reg_val)
-{
-#ifndef CFG_ATHRHDR_REG
-    uint16_t reg_word_addr = reg_addr / 2, phy_val;
-    uint32_t phy_addr;
-    uint8_t phy_reg; 
-
-    /* configure register high address */
-    phy_addr = 0x18;
-    phy_reg = 0x0;
-    phy_val = (reg_word_addr >> 8) & 0x1ff;         /* bit16-8 of reg address*/
-    phy_reg_write (0, phy_addr, phy_reg, phy_val);
-
-    /* read register with low address */
-    phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
-    phy_reg = reg_word_addr & 0x1f;                 /* bit 4-0 of reg address */
-    phy_reg_write (0, phy_addr, phy_reg, reg_val);
-#else
-    uint8_t reg_data[4];
-
-    memset (reg_data, 0, 4);
-    reg_data[0] = (uint8_t)(0x00ff & reg_val);
-    reg_data[1] = (uint8_t)((0xff00 & reg_val) >> 8);
-    reg_data[2] = (uint8_t)((0xff0000 & reg_val) >> 16);
-    reg_data[3] = (uint8_t)((0xff000000 & reg_val) >> 24);
-
-    athrs26_header_write_reg (reg_addr, 4, reg_data);
-#endif
-
-}
-