[package] uboot-kirkwood: update to 2012.04.01

iConnect board tested by:

Tim Fletcher <tim@night-shade.org.uk>
Wojciech Dubowik <wojciech.dubowik@neratec.com>

DockStar board tested by:

Martin Mueller <mm@sig21.net>

RaidSonic ICY BOX NAS6210 board tested by:

Luka Perkov <uboot@lukaperkov.net>

SheevaPlug was not tested but support for SheevaPlug is taken from upstream
uboot and it is not reported to be broken there.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32717 3c298f89-4303-0410-b956-a3cf2f4a3e73

7 files changed, 1477 insertions, 20 deletions

diff --git a/package/uboot-kirkwood/patches/0001-ib62x0.patch b/package/uboot-kirkwood/patches/0001-ib62x0.patch
new file mode 100644
index 0000000000..0a7dc47a59
--- /dev/null
+++ b/package/uboot-kirkwood/patches/0001-ib62x0.patch
@@ -0,0 +1,542 @@
+http://lists.denx.de/pipermail/u-boot/2012-April/122597.html
+http://patchwork.ozlabs.org/patch/153293/
+---
+
+diff --git a/MAINTAINERS b/MAINTAINERS
+index 708ded7..9d2aba7 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -777,6 +777,10 @@ Linus Walleij <linus.walleij@linaro.org>
+ 	integratorap	various
+ 	integratorcp	various
+ 
++Luka Perkov <uboot@lukaperkov.net>
++
++	ib62x0		ARM926EJS
++
+ Dave Peverley <dpeverley@mpc-data.co.uk>
+ 
+ 	omap730p2	ARM926EJS
+diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile
+new file mode 100644
+index 0000000..d450f8d
+--- /dev/null
++++ b/board/raidsonic/ib62x0/Makefile
+@@ -0,0 +1,43 @@
++#
++# (C) Copyright 2009
++# Marvell Semiconductor <www.marvell.com>
++# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program. If not, see <http://www.gnu.org/licenses/>.
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= $(obj)lib$(BOARD).o
++
++COBJS	:= ib62x0.o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
++	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
+new file mode 100644
+index 0000000..65f2c2e
+--- /dev/null
++++ b/board/raidsonic/ib62x0/ib62x0.c
+@@ -0,0 +1,79 @@
++/*
++ * Copyright (C) 2011-2012
++ * Gerald Kerma <dreagle@doukki.net>
++ * Luka Perkov <uboot@lukaperkov.net>
++ * Simon Baatz <gmbnomis@gmail.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <common.h>
++#include <miiphy.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/kirkwood.h>
++#include <asm/arch/mpp.h>
++#include "ib62x0.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++int board_early_init_f(void)
++{
++	/*
++	 * default gpio configuration
++	 * There are maximum 64 gpios controlled through 2 sets of registers
++	 * the below configuration configures mainly initial LED status
++	 */
++	kw_config_gpio(IB62x0_OE_VAL_LOW,
++			IB62x0_OE_VAL_HIGH,
++			IB62x0_OE_LOW, IB62x0_OE_HIGH);
++
++	/* Multi-Purpose Pins Functionality configuration */
++	u32 kwmpp_config[] = {
++		MPP0_NF_IO2,
++		MPP1_NF_IO3,
++		MPP2_NF_IO4,
++		MPP3_NF_IO5,
++		MPP4_NF_IO6,
++		MPP5_NF_IO7,
++		MPP6_SYSRST_OUTn,
++		MPP8_TW_SDA,
++		MPP9_TW_SCK,
++		MPP10_UART0_TXD,
++		MPP11_UART0_RXD,
++		MPP18_NF_IO0,
++		MPP19_NF_IO1,
++		MPP20_SATA1_ACTn,
++		MPP21_SATA0_ACTn,
++		MPP22_GPIO,     /* Power LED red */
++		MPP24_GPIO,     /* Power off device */
++		MPP25_GPIO,     /* Power LED green */
++		MPP27_GPIO,     /* USB transfer LED */
++		MPP28_GPIO,     /* Reset button */
++		MPP29_GPIO,     /* USB Copy button */
++		0
++	};
++	kirkwood_mpp_conf(kwmpp_config);
++	return 0;
++}
++
++int board_init(void)
++{
++	/* adress of boot parameters */
++	gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
++
++	return 0;
++}
+diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h
+new file mode 100644
+index 0000000..0c30690
+--- /dev/null
++++ b/board/raidsonic/ib62x0/ib62x0.h
+@@ -0,0 +1,40 @@
++/*
++ * Copyright (C) 2011-2012
++ * Gerald Kerma <dreagle@doukki.net>
++ * Simon Baatz <gmbnomis@gmail.com>
++ * Luka Perkov <uboot@lukaperkov.net>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef __IB62x0_H
++#define __IB62x0_H
++
++#define IB62x0_OE_LOW		(~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27))
++#define IB62x0_OE_HIGH		(~(0))
++#define IB62x0_OE_VAL_LOW	0
++#define IB62x0_OE_VAL_HIGH	0
++
++/* PHY related */
++#define MV88E1116_LED_FCTRL_REG		10
++#define MV88E1116_CPRSP_CR3_REG		21
++#define MV88E1116_MAC_CTRL_REG		21
++#define MV88E1116_PGADR_REG		22
++#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
++#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
++
++#endif /* __IB62x0_H */
+diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg
+new file mode 100644
+index 0000000..bd594eb
+--- /dev/null
++++ b/board/raidsonic/ib62x0/kwbimage.cfg
+@@ -0,0 +1,169 @@
++#
++# Copyright (C) 2011-2012
++# Gerald Kerma <dreagle@doukki.net>
++# Simon Baatz <gmbnomis@gmail.com>
++# Luka Perkov <uboot@lukaperkov.net>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program. If not, see <http://www.gnu.org/licenses/>.
++#
++# Refer docs/README.kwimage for more details about how-to configure
++# and create kirkwood boot image
++#
++
++# Boot Media configurations
++BOOT_FROM	nand	# change from nand to uart if building UART image
++NAND_ECC_MODE	default
++NAND_PAGE_SIZE	0x0800
++
++# SOC registers configuration using bootrom header extension
++# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
++
++# Configure RGMII-0 interface pad voltage to 1.8V
++DATA 0xffd100e0 0x1b1b1b9b
++
++#Dram initalization for SINGLE x16 CL=5 @ 400MHz
++DATA 0xffd01400 0x43000c30	# DDR Configuration register
++# bit13-0:  0xc30, (3120 DDR2 clks refresh rate)
++# bit23-14: 0x0,
++# bit24:    0x1,     enable exit self refresh mode on DDR access
++# bit25:    0x1,     required
++# bit29-26: 0x0,
++# bit31-30: 0x1,
++
++DATA 0xffd01404 0x37543000	# DDR Controller Control Low
++# bit4:     0x0, addr/cmd in smame cycle
++# bit5:     0x0, clk is driven during self refresh, we don't care for APX
++# bit6:     0x0, use recommended falling edge of clk for addr/cmd
++# bit14:    0x0, input buffer always powered up
++# bit18:    0x1, cpu lock transaction enabled
++# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
++# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
++# bit30-28: 0x3, required
++# bit31:    0x0, no additional STARTBURST delay
++
++DATA 0xffd01408 0x22125451	# DDR Timing (Low) (active cycles value +1)
++# bit3-0:   TRAS lsbs
++# bit7-4:   TRCD
++# bit11-8:  TRP
++# bit15-12: TWR
++# bit19-16: TWTR
++# bit20:    TRAS msb
++# bit23-21: 0x0
++# bit27-24: TRRD
++# bit31-28: TRTP
++
++DATA 0xffd0140c 0x00000a33	# DDR Timing (High)
++# bit6-0:   TRFC
++# bit8-7:   TR2R
++# bit10-9:  TR2W
++# bit12-11: TW2W
++# bit31-13: 0x0, required
++
++DATA 0xffd01410 0x0000000c	# DDR Address Control
++# bit1-0:   00,  Cs0width (x8)
++# bit3-2:   11,  Cs0size (1Gb)
++# bit5-4:   00,  Cs1width (x8)
++# bit7-6:   11,  Cs1size (1Gb)
++# bit9-8:   00,  Cs2width (nonexistent
++# bit11-10: 00,  Cs2size  (nonexistent
++# bit13-12: 00,  Cs3width (nonexistent
++# bit15-14: 00,  Cs3size  (nonexistent
++# bit16:    0,   Cs0AddrSel
++# bit17:    0,   Cs1AddrSel
++# bit18:    0,   Cs2AddrSel
++# bit19:    0,   Cs3AddrSel
++# bit31-20: 0x0, required
++
++DATA 0xffd01414 0x00000000	# DDR Open Pages Control
++# bit0:    0,   OpenPage enabled
++# bit31-1: 0x0, required
++
++DATA 0xffd01418 0x00000000	# DDR Operation
++# bit3-0:   0x0, DDR cmd
++# bit31-4:  0x0, required
++
++DATA 0xffd0141c 0x00000c52	# DDR Mode
++# bit2-0:   0x2, BurstLen=2 required
++# bit3:     0x0, BurstType=0 required
++# bit6-4:   0x4, CL=5
++# bit7:     0x0, TestMode=0 normal
++# bit8:     0x0, DLL reset=0 normal
++# bit11-9:  0x6, auto-precharge write recovery ????????????
++# bit12:    0x0, PD must be zero
++# bit31-13: 0x0, required
++
++DATA 0xffd01420 0x00000040	# DDR Extended Mode
++# bit0:     0,   DDR DLL enabled
++# bit1:     0,   DDR drive strenght normal
++# bit2:     1,   DDR ODT control lsd (disabled)
++# bit5-3:   0x0, required
++# bit6:     0,   DDR ODT control msb, (disabled)
++# bit9-7:   0x0, required
++# bit10:    0,   differential DQS enabled
++# bit11:    0,   required
++# bit12:    0,   DDR output buffer enabled
++# bit31-13: 0x0, required
++
++DATA 0xffd01424 0x0000f17f	# DDR Controller Control High
++# bit2-0:   0x7, required
++# bit3:     0x1, MBUS Burst Chop disabled
++# bit6-4:   0x7, required
++# bit7:     0x0,
++# bit8:     0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
++# bit9:     0x0, no half clock cycle addition to dataout
++# bit10:    0x0, 1/4 clock cycle skew enabled for addr/ctl signals
++# bit11:    0x0, 1/4 clock cycle skew disabled for write mesh
++# bit15-12: 0xf, required
++# bit31-16: 0,   required
++
++DATA 0xffd01428 0x00085520	# DDR2 ODT Read Timing (default values)
++DATA 0xffd0147c 0x00008552	# DDR2 ODT Write Timing (default values)
++
++DATA 0xffd01500 0x00000000	# CS[0]n Base address to 0x0
++DATA 0xffd01504 0x0ffffff1	# CS[0]n Size
++# bit0:     0x1,     Window enabled
++# bit1:     0x0,     Write Protect disabled
++# bit3-2:   0x0,     CS0 hit selected
++# bit23-4:  0xfffff, required
++# bit31-24: 0x0f,    Size (i.e. 256MB)
++
++DATA 0xffd01508 0x10000000	# CS[1]n Base address to 256Mb
++DATA 0xffd0150c 0x00000000	# CS[1]n Size, window disabled
++
++DATA 0xffd01514 0x00000000	# CS[2]n Size, window disabled
++DATA 0xffd0151c 0x00000000	# CS[3]n Size, window disabled
++
++DATA 0xffd01494 0x00030000	# DDR ODT Control (Low)
++# bit3-0:     ODT0Rd, MODT[0] asserted during read from DRAM CS1
++# bit7-4:     ODT0Rd, MODT[0] asserted during read from DRAM CS0
++# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
++# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
++
++DATA 0xffd01498 0x00000000	# DDR ODT Control (High)
++# bit1-0:  0x0, ODT0 controlled by ODT Control (low) register above
++# bit3-2:  0x1, ODT1 active NEVER!
++# bit31-4: 0x0, required
++
++DATA 0xffd0149c 0x0000e803	# CPU ODT Control
++DATA 0xffd01480 0x00000001	# DDR Initialization Control
++# bit0: 0x1, enable DDR init upon this register write
++
++DATA 0xFFD20134 0x66666666      # L2 RAM Timing 0 Register
++DATA 0xFFD20138 0x66666666      # L2 RAM Timing 1 Register
++
++# End of Header extension
++DATA 0x0 0x0
+diff --git a/boards.cfg b/boards.cfg
+index 3cf75c3..23f84e8 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -153,6 +153,7 @@ openrd_client                arm         arm926ejs   openrd              Marvell
+ openrd_ultimate              arm         arm926ejs   openrd              Marvell        kirkwood        openrd:BOARD_IS_OPENRD_ULTIMATE
+ rd6281a                      arm         arm926ejs   -                   Marvell        kirkwood
+ sheevaplug                   arm         arm926ejs   -                   Marvell        kirkwood
++ib62x0                       arm         arm926ejs   ib62x0              raidsonic      kirkwood
+ dockstar                     arm         arm926ejs   -                   Seagate        kirkwood
+ jadecpu                      arm         arm926ejs   jadecpu             syteco         mb86r0x
+ mx25pdk                      arm         arm926ejs   mx25pdk             freescale      mx25		mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg
+diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
+new file mode 100644
+index 0000000..85856f2
+--- /dev/null
++++ b/include/configs/ib62x0.h
+@@ -0,0 +1,150 @@
++/*
++ * Copyright (C) 2011-2012
++ * Gerald Kerma <dreagle@doukki.net>
++ * Luka Perkov <uboot@lukaperkov.net>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef _CONFIG_IB62x0_H
++#define _CONFIG_IB62x0_H
++
++/*
++ * Version number information
++ */
++#define CONFIG_IDENT_STRING	" RaidSonic ICY BOX IB-NAS62x0"
++
++/*
++ * High level configuration options
++ */
++#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
++#define CONFIG_KIRKWOOD			/* SOC Family Name */
++#define CONFIG_KW88F6281		/* SOC Name */
++#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
++
++/*
++ * Machine type
++ */
++#define CONFIG_MACH_TYPE	MACH_TYPE_NAS6210
++
++/*
++ * Compression configuration
++ */
++#define CONFIG_BZIP2
++#define CONFIG_LZMA
++#define CONFIG_LZO
++
++/*
++ * Commands configuration
++ */
++#define CONFIG_SYS_NO_FLASH		/* declare no flash (NOR/SPI) */
++#define CONFIG_SYS_MVFS
++#include <config_cmd_default.h>
++#define CONFIG_CMD_ENV
++#define CONFIG_CMD_IDE
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_PING
++#define CONFIG_CMD_USB
++
++/*
++ * mv-common.h should be defined after CMD configs since it used them
++ * to enable certain macros
++ */
++#include "mv-common.h"
++
++#undef CONFIG_SYS_PROMPT
++#define CONFIG_SYS_PROMPT	"ib62x0 => "
++
++/*
++ * Environment variables configuration
++ */
++#ifdef CONFIG_CMD_NAND
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_SECT_SIZE	0x20000
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++#define CONFIG_ENV_SIZE		0x20000
++#define CONFIG_ENV_OFFSET	0x80000
++
++/*
++ * Default environment variables
++ */
++#define CONFIG_BOOTCOMMAND \
++	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
++	"ubi part rootfs; "						\
++	"ubifsmount rootfs; "						\
++	"ubifsload 0x800000 ${kernel}; "				\
++	"bootm 0x800000"
++
++#define CONFIG_MTDPARTS				\
++	"mtdparts=orion_nand:"			\
++	"0x80000@0x0(uboot),"			\
++	"0x20000@0x80000(uboot_env),"		\
++	"-@0xa0000(rootfs)\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS					\
++	"console=console=ttyS0,115200\0"				\
++	"mtdids=nand0=orion_nand\0"					\
++	"mtdparts="CONFIG_MTDPARTS					\
++	"kernel=/boot/uImage\0"						\
++	"bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
++
++/*
++ * Ethernet driver configuration
++ */
++#ifdef CONFIG_CMD_NET
++#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
++#define CONFIG_PHY_BASE_ADR	0
++#undef CONFIG_RESET_PHY_R
++#endif /* CONFIG_CMD_NET */
++
++/*
++ * SATA driver configuration
++ */
++#ifdef CONFIG_CMD_IDE
++#define __io
++#define CONFIG_IDE_PREINIT
++#define CONFIG_DOS_PARTITION
++#define CONFIG_MVSATA_IDE_USE_PORT0
++#define CONFIG_MVSATA_IDE_USE_PORT1
++#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
++#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
++#endif /* CONFIG_CMD_IDE */
++
++/*
++ * RTC driver configuration
++ */
++#ifdef CONFIG_CMD_DATE
++#define CONFIG_RTC_MV
++#endif /* CONFIG_CMD_DATE */
++
++/*
++ * File system
++ */
++#define CONFIG_CMD_EXT2
++#define CONFIG_CMD_FAT
++#define CONFIG_CMD_JFFS2
++#define CONFIG_CMD_UBI
++#define CONFIG_CMD_UBIFS
++#define CONFIG_RBTREE
++#define CONFIG_MTD_DEVICE
++#define CONFIG_MTD_PARTITIONS
++#define CONFIG_CMD_MTDPARTS
++
++#endif /* _CONFIG_IB62x0_H */
diff --git a/package/uboot-kirkwood/patches/0002-kwboot.patch b/package/uboot-kirkwood/patches/0002-kwboot.patch
new file mode 100644
index 0000000000..091d6a164c
--- /dev/null
+++ b/package/uboot-kirkwood/patches/0002-kwboot.patch
@@ -0,0 +1,873 @@
+http://lists.denx.de/pipermail/u-boot/2012-May/125296.html
+http://patchwork.ozlabs.org/patch/161566/
+---
+
+diff --git a/doc/kwboot.1 b/doc/kwboot.1
+new file mode 100644
+index 0000000..ed08398
+--- /dev/null
++++ b/doc/kwboot.1
+@@ -0,0 +1,84 @@
++.TH KWBOOT 1 "2012-05-19"
++
++.SH NAME
++kwboot \- Boot Marvell Kirkwood SoCs over a serial link.
++.SH SYNOPSIS
++.B kwboot
++.RB [ "-b \fIimage\fP" ]
++.RB [ "-p" ]
++.RB [ "-t" ]
++.RB [ "-B \fIbaudrate\fP" ]
++.RB \fITTY\fP
++.SH "DESCRIPTION"
++
++The \fBmkimage\fP program boots boards based on Marvell's Kirkwood
++platform over their integrated UART. Boot image files will typically
++contain a second stage boot loader, such as U-Boot. The image file
++must conform to Marvell's BootROM firmware image format
++(\fIkwbimage\fP), created using a tool such as \fBmkimage\fP.
++
++Following power-up or a system reset, system BootROM code polls the
++UART for a brief period of time, sensing a handshake message which
++initiates an image upload. This program sends this boot message until
++it receives a positive acknowledgement. The image is transfered using
++Xmodem.
++
++Additionally, this program implements a minimal terminal mode, which
++can be used either standalone, or entered immediately following boot
++image transfer completion. This is often useful to catch early boot
++messages, or to manually interrupt a default boot procedure performed
++by the second-stage loader.
++
++.SH "OPTIONS"
++
++.TP
++.BI "\-b \fIimage\fP"
++Handshake; then upload file \fIimage\fP over \fITTY\fP.
++
++Note that for the encapsulated boot code to be executed, \fIimage\fP
++must be of type "UART boot" (0x69). Boot images of different types,
++such as backup images of vendor firmware downloaded from flash memory
++(type 0x8B), will not work (or not as expected). See \fB-p\fP for a
++workaround.
++
++This mode writes handshake status and upload progress indication to
++stdout.
++
++.TP
++.BI "\-p"
++In combination with \fB-b\fP, patches the header in \fIimage\fP prior
++to upload, to "UART boot" type.
++
++This option attempts on-the-fly conversion of some none-UART image
++types, such as images which were originally formatted to be stored in
++flash memory.
++
++Conversion is performed in memory. The contents of \fIimage\fP will
++not be altered.
++
++.TP
++.BI "\-t"
++Run a terminal program, connecting standard input and output to
++.RB \fITTY\fP.
++
++If used in combination with \fB-b\fP, terminal mode is entered
++immediately following a successful image upload.
++
++If standard I/O streams connect to a console, this mode will terminate
++after receiving 'ctrl-\\' followed by 'c' from console input.
++
++.TP
++.BI "\-B \fIbaudrate\fP"
++Adjust the baud rate on \fITTY\fP. Default rate is 115200.
++
++.SH "SEE ALSO"
++.PP
++\fBmkimage\fP(1)
++
++.SH "AUTHORS"
++
++Daniel Stodden <daniel.stodden@gmail.com>
++.br
++Luka Perkov <uboot@lukaperkov.net>
++.br
++David Purdy <david.c.purdy@gmail.com>
+diff --git a/tools/Makefile b/tools/Makefile
+index 8993fdd..8097d95 100644
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -72,6 +72,7 @@ BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX)
+ BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
+ BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
+ BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
++BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX)
+ 
+ # Source files which exist outside the tools directory
+ EXT_OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += common/env_embedded.o
+@@ -101,6 +102,7 @@ OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
+ NOPED_OBJ_FILES-y += os_support.o
+ OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o
+ NOPED_OBJ_FILES-y += ublimage.o
++OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o
+ 
+ # Don't build by default
+ #ifeq ($(ARCH),ppc)
+@@ -234,6 +236,10 @@ $(obj)ncb$(SFX):	$(obj)ncb.o
+ $(obj)ubsha1$(SFX):	$(obj)os_support.o $(obj)sha1.o $(obj)ubsha1.o
+ 	$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
+ 
++$(obj)kwboot$(SFX): $(obj)kwboot.o
++	$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
++	$(HOSTSTRIP) $@
++
+ # Some of the tool objects need to be accessed from outside the tools directory
+ $(obj)%.o: $(SRCTREE)/common/%.c
+ 	$(HOSTCC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $<
+diff --git a/tools/kwboot.c b/tools/kwboot.c
+new file mode 100644
+index 0000000..e773f01
+--- /dev/null
++++ b/tools/kwboot.c
+@@ -0,0 +1,742 @@
++/*
++ * Boot a Marvell Kirkwood SoC, with Xmodem over UART0.
++ *
++ * (c) 2012 Daniel Stodden <daniel.stodden@gmail.com>
++ *
++ * References: marvell.com, "88F6180, 88F6190, 88F6192, and 88F6281
++ *   Integrated Controller: Functional Specifications" December 2,
++ *   2008. Chapter 24.2 "BootROM Firmware".
++ */
++
++#include <stdlib.h>
++#include <stdio.h>
++#include <string.h>
++#include <stdarg.h>
++#include <libgen.h>
++#include <fcntl.h>
++#include <errno.h>
++#include <unistd.h>
++#include <stdint.h>
++#include <termios.h>
++#include <sys/mman.h>
++#include <sys/stat.h>
++
++#include "kwbimage.h"
++
++#ifdef __GNUC__
++#define PACKED __attribute((packed))
++#else
++#define PACKED
++#endif
++
++/*
++ * Marvell BootROM UART Sensing
++ */
++
++static unsigned char kwboot_msg_boot[] = {
++	0xBB, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77
++};
++
++#define KWBOOT_MSG_REQ_DELAY	10 /* ms */
++#define KWBOOT_MSG_RSP_TIMEO	50 /* ms */
++
++/*
++ * Xmodem Transfers
++ */
++
++#define SOH	1	/* sender start of block header */
++#define EOT	4	/* sender end of block transfer */
++#define ACK	6	/* target block ack */
++#define NAK	21	/* target block negative ack */
++#define CAN	24	/* target/sender transfer cancellation */
++
++struct kwboot_block {
++	uint8_t soh;
++	uint8_t pnum;
++	uint8_t _pnum;
++	uint8_t data[128];
++	uint8_t csum;
++} PACKED;
++
++#define KWBOOT_BLK_RSP_TIMEO 1000 /* ms */
++
++static int kwboot_verbose;
++
++static void
++kwboot_printv(const char *fmt, ...)
++{
++	va_list ap;
++
++	if (kwboot_verbose) {
++		va_start(ap, fmt);
++		vprintf(fmt, ap);
++		va_end(ap);
++		fflush(stdout);
++	}
++}
++
++static void
++__spinner(void)
++{
++	const char seq[] = { '-', '\\', '|', '/' };
++	const int div = 8;
++	static int state, bs;
++
++	if (state % div == 0) {
++		fputc(bs, stdout);
++		fputc(seq[state / div % sizeof(seq)], stdout);
++		fflush(stdout);
++	}
++
++	bs = '\b';
++	state++;
++}
++
++static void
++kwboot_spinner(void)
++{
++	if (kwboot_verbose)
++		__spinner();
++}
++
++static void
++__progress(int pct, char c)
++{
++	const int width = 70;
++	static const char *nl = "";
++	static int pos;
++
++	if (pos % width == 0)
++		printf("%s%3d %% [", nl, pct);
++
++	fputc(c, stdout);
++
++	nl = "]\n";
++	pos++;
++
++	if (pct == 100) {
++		while (pos++ < width)
++			fputc(' ', stdout);
++		fputs(nl, stdout);
++	}
++
++	fflush(stdout);
++
++}
++
++static void
++kwboot_progress(int _pct, char c)
++{
++	static int pct;
++
++	if (_pct != -1)
++		pct = _pct;
++
++	if (kwboot_verbose)
++		__progress(pct, c);
++}
++
++static int
++kwboot_tty_recv(int fd, void *buf, size_t len, int timeo)
++{
++	int rc, nfds;
++	fd_set rfds;
++	struct timeval tv;
++	ssize_t n;
++
++	rc = -1;
++
++	FD_ZERO(&rfds);
++	FD_SET(fd, &rfds);
++
++	tv.tv_sec = 0;
++	tv.tv_usec = timeo * 1000;
++	if (tv.tv_usec > 1000000) {
++		tv.tv_sec += tv.tv_usec / 1000000;
++		tv.tv_usec %= 1000000;
++	}
++
++	do {
++		nfds = select(fd + 1, &rfds, NULL, NULL, &tv);
++		if (nfds < 0)
++			goto out;
++		if (!nfds) {
++			errno = ETIMEDOUT;
++			goto out;
++		}
++
++		n = read(fd, buf, len);
++		if (n < 0)
++			goto out;
++
++		buf = (char *)buf + n;
++		len -= n;
++	} while (len > 0);
++
++	rc = 0;
++out:
++	return rc;
++}
++
++static int
++kwboot_tty_send(int fd, const void *buf, size_t len)
++{
++	int rc;
++	ssize_t n;
++
++	rc = -1;
++
++	do {
++		n = write(fd, buf, len);
++		if (n < 0)
++			goto out;
++
++		buf = (char *)buf + n;
++		len -= n;
++	} while (len > 0);
++
++	rc = tcdrain(fd);
++out:
++	return rc;
++}
++
++static int
++kwboot_tty_send_char(int fd, unsigned char c)
++{
++	return kwboot_tty_send(fd, &c, 1);
++}
++
++static speed_t
++kwboot_tty_speed(int baudrate)
++{
++	switch (baudrate) {
++	case 115200:
++		return B115200;
++	case 57600:
++		return B57600;
++	case 38400:
++		return B38400;
++	case 19200:
++		return B19200;
++	case 9600:
++		return B9600;
++	}
++
++	return -1;
++}
++
++static int
++kwboot_open_tty(const char *path, speed_t speed)
++{
++	int rc, fd;
++	struct termios tio;
++
++	rc = -1;
++
++	fd = open(path, O_RDWR|O_NOCTTY|O_NDELAY);
++	if (fd < 0)
++		goto out;
++
++	memset(&tio, 0, sizeof(tio));
++
++	tio.c_iflag = 0;
++	tio.c_cflag = CREAD|CLOCAL|CS8;
++
++	tio.c_cc[VMIN] = 1;
++	tio.c_cc[VTIME] = 10;
++
++	cfsetospeed(&tio, speed);
++	cfsetispeed(&tio, speed);
++
++	rc = tcsetattr(fd, TCSANOW, &tio);
++	if (rc)
++		goto out;
++
++	rc = fd;
++out:
++	if (rc < 0) {
++		if (fd >= 0)
++			close(fd);
++	}
++
++	return rc;
++}
++
++static int
++kwboot_bootmsg(int tty, void *msg)
++{
++	int rc;
++	char c;
++
++	kwboot_printv("Sending boot message. Please reboot the target...");
++
++	do {
++		rc = tcflush(tty, TCIOFLUSH);
++		if (rc)
++			break;
++
++		rc = kwboot_tty_send(tty, msg, 8);
++		if (rc) {
++			usleep(KWBOOT_MSG_REQ_DELAY * 1000);
++			continue;
++		}
++
++		rc = kwboot_tty_recv(tty, &c, 1, KWBOOT_MSG_RSP_TIMEO);
++
++		kwboot_spinner();
++
++	} while (rc || c != NAK);
++
++	kwboot_printv("\n");
++
++	return rc;
++}
++
++static int
++kwboot_xm_makeblock(struct kwboot_block *block, const void *data,
++		    size_t size, int pnum)
++{
++	const size_t blksz = sizeof(block->data);
++	size_t n;
++	int i;
++
++	block->pnum = pnum;
++	block->_pnum = ~block->pnum;
++
++	n = size < blksz ? size : blksz;
++	memcpy(&block->data[0], data, n);
++	memset(&block->data[n], 0, blksz - n);
++
++	block->csum = 0;
++	for (i = 0; i < n; i++)
++		block->csum += block->data[i];
++
++	return n;
++}
++
++static int
++kwboot_xm_sendblock(int fd, struct kwboot_block *block)
++{
++	int rc, retries;
++	char c;
++
++	retries = 16;
++	do {
++		rc = kwboot_tty_send(fd, block, sizeof(*block));
++		if (rc)
++			break;
++
++		rc = kwboot_tty_recv(fd, &c, 1, KWBOOT_BLK_RSP_TIMEO);
++		if (rc)
++			break;
++
++		if (c != ACK)
++			kwboot_progress(-1, '+');
++
++	} while (c == NAK && retries-- > 0);
++
++	rc = -1;
++
++	switch (c) {
++	case ACK:
++		rc = 0;
++		break;
++	case NAK:
++		errno = EBADMSG;
++		break;
++	case CAN:
++		errno = ECANCELED;
++		break;
++	default:
++		errno = EPROTO;
++		break;
++	}
++
++	return rc;
++}
++
++static int
++kwboot_xmodem(int tty, const void *_data, size_t size)
++{
++	const uint8_t *data = _data;
++	int rc, pnum, N, err;
++
++	pnum = 1;
++	N = 0;
++
++	kwboot_printv("Sending boot image...\n");
++
++	do {
++		struct kwboot_block block;
++		int n;
++
++		n = kwboot_xm_makeblock(&block,
++					data + N, size - N,
++					pnum++);
++		if (n < 0)
++			goto can;
++
++		if (!n)
++			break;
++
++		rc = kwboot_xm_sendblock(tty, &block);
++		if (rc)
++			goto out;
++
++		N += n;
++		kwboot_progress(N * 100 / size, '.');
++	} while (1);
++
++	rc = kwboot_tty_send_char(tty, EOT);
++
++out:
++	return rc;
++
++can:
++	err = errno;
++	kwboot_tty_send_char(tty, CAN);
++	errno = err;
++	goto out;
++}
++
++static int
++kwboot_term_pipe(int in, int out, char *quit, int *s)
++{
++	ssize_t nin, nout;
++	char _buf[128], *buf = _buf;
++
++	nin = read(in, buf, sizeof(buf));
++	if (nin < 0)
++		return -1;
++
++	if (quit) {
++		int i;
++
++		for (i = 0; i < nin; i++) {
++			if (*buf == quit[*s]) {
++				(*s)++;
++				if (!quit[*s])
++					return 0;
++				buf++;
++				nin--;
++			} else
++				while (*s > 0) {
++					nout = write(out, quit, *s);
++					if (nout <= 0)
++						return -1;
++					(*s) -= nout;
++				}
++		}
++	}
++
++	while (nin > 0) {
++		nout = write(out, buf, nin);
++		if (nout <= 0)
++			return -1;
++		nin -= nout;
++	}
++
++	return 0;
++}
++
++static int
++kwboot_terminal(int tty)
++{
++	int rc, in, s;
++	char *quit = "\34c";
++	struct termios otio, tio;
++
++	rc = -1;
++
++	in = STDIN_FILENO;
++	if (isatty(in)) {
++		rc = tcgetattr(in, &otio);
++		if (!rc) {
++			tio = otio;
++			cfmakeraw(&tio);
++			rc = tcsetattr(in, TCSANOW, &tio);
++		}
++		if (rc) {
++			perror("tcsetattr");
++			goto out;
++		}
++
++		kwboot_printv("[Type Ctrl-%c + %c to quit]\r\n",
++			      quit[0]|0100, quit[1]);
++	} else
++		in = -1;
++
++	rc = 0;
++	s = 0;
++
++	do {
++		fd_set rfds;
++		int nfds = 0;
++
++		FD_SET(tty, &rfds);
++		nfds = nfds < tty ? tty : nfds;
++
++		if (in >= 0) {
++			FD_SET(in, &rfds);
++			nfds = nfds < in ? in : nfds;
++		}
++
++		nfds = select(nfds + 1, &rfds, NULL, NULL, NULL);
++		if (nfds < 0)
++			break;
++
++		if (FD_ISSET(tty, &rfds)) {
++			rc = kwboot_term_pipe(tty, STDOUT_FILENO, NULL, NULL);
++			if (rc)
++				break;
++		}
++
++		if (FD_ISSET(in, &rfds)) {
++			rc = kwboot_term_pipe(in, tty, quit, &s);
++			if (rc)
++				break;
++		}
++	} while (quit[s] != 0);
++
++	tcsetattr(in, TCSANOW, &otio);
++out:
++	return rc;
++}
++
++static void *
++kwboot_mmap_image(const char *path, size_t *size, int prot)
++{
++	int rc, fd, flags;
++	struct stat st;
++	void *img;
++
++	rc = -1;
++	fd = -1;
++	img = NULL;
++
++	fd = open(path, O_RDONLY);
++	if (fd < 0)
++		goto out;
++
++	rc = fstat(fd, &st);
++	if (rc)
++		goto out;
++
++	flags = (prot & PROT_WRITE) ? MAP_PRIVATE : MAP_SHARED;
++
++	img = mmap(NULL, st.st_size, prot, flags, fd, 0);
++	if (img == MAP_FAILED) {
++		img = NULL;
++		goto out;
++	}
++
++	rc = 0;
++	*size = st.st_size;
++out:
++	if (rc && img) {
++		munmap(img, st.st_size);
++		img = NULL;
++	}
++	if (fd >= 0)
++		close(fd);
++
++	return img;
++}
++
++static uint8_t
++kwboot_img_csum8(void *_data, size_t size)
++{
++	uint8_t *data = _data, csum;
++
++	for (csum = 0; size-- > 0; data++)
++		csum += *data;
++
++	return csum;
++}
++
++static int
++kwboot_img_patch_hdr(void *img, size_t size)
++{
++	int rc;
++	bhr_t *hdr;
++	uint8_t csum;
++	const size_t hdrsz = sizeof(*hdr);
++
++	rc = -1;
++	hdr = img;
++
++	if (size < hdrsz) {
++		errno = EINVAL;
++		goto out;
++	}
++
++	csum = kwboot_img_csum8(hdr, hdrsz) - hdr->checkSum;
++	if (csum != hdr->checkSum) {
++		errno = EINVAL;
++		goto out;
++	}
++
++	if (hdr->blockid == IBR_HDR_UART_ID) {
++		rc = 0;
++		goto out;
++	}
++
++	hdr->blockid = IBR_HDR_UART_ID;
++
++	hdr->nandeccmode = IBR_HDR_ECC_DISABLED;
++	hdr->nandpagesize = 0;
++
++	hdr->srcaddr = hdr->ext
++		? sizeof(struct kwb_header)
++		: sizeof(*hdr);
++
++	hdr->checkSum = kwboot_img_csum8(hdr, hdrsz) - csum;
++
++	rc = 0;
++out:
++	return rc;
++}
++
++static void
++kwboot_usage(FILE *stream, char *progname)
++{
++	fprintf(stream,
++		"Usage: %s -b <image> [ -p ] [ -t ] "
++		"[-B <baud> ] <TTY>\n", progname);
++	fprintf(stream, "\n");
++	fprintf(stream, "  -b <image>: boot <image>\n");
++	fprintf(stream, "  -p: patch <image> to type 0x69 (uart boot)\n");
++	fprintf(stream, "\n");
++	fprintf(stream, "  -t: mini terminal\n");
++	fprintf(stream, "\n");
++	fprintf(stream, "  -B <baud>: set baud rate\n");
++	fprintf(stream, "\n");
++}
++
++int
++main(int argc, char **argv)
++{
++	const char *ttypath, *imgpath;
++	int rv, rc, tty, term, prot, patch;
++	void *bootmsg;
++	void *img;
++	size_t size;
++	speed_t speed;
++
++	rv = 1;
++	tty = -1;
++	bootmsg = NULL;
++	imgpath = NULL;
++	img = NULL;
++	term = 0;
++	patch = 0;
++	size = 0;
++	speed = B115200;
++
++	kwboot_verbose = isatty(STDOUT_FILENO);
++
++	do {
++		int c = getopt(argc, argv, "hb:ptB:");
++		if (c < 0)
++			break;
++
++		switch (c) {
++		case 'b':
++			bootmsg = kwboot_msg_boot;
++			imgpath = optarg;
++			break;
++
++		case 'p':
++			patch = 1;
++			break;
++
++		case 't':
++			term = 1;
++			break;
++
++		case 'B':
++			speed = kwboot_tty_speed(atoi(optarg));
++			if (speed == -1)
++				goto usage;
++			break;
++
++		case 'h':
++			rv = 0;
++		default:
++			goto usage;
++		}
++	} while (1);
++
++	if (!bootmsg && !term)
++		goto usage;
++
++	if (patch && !imgpath)
++		goto usage;
++
++	if (argc - optind < 1)
++		goto usage;
++
++	ttypath = argv[optind++];
++
++	tty = kwboot_open_tty(ttypath, speed);
++	if (tty < 0) {
++		perror(ttypath);
++		goto out;
++	}
++
++	if (imgpath) {
++		prot = PROT_READ | (patch ? PROT_WRITE : 0);
++
++		img = kwboot_mmap_image(imgpath, &size, prot);
++		if (!img) {
++			perror(imgpath);
++			goto out;
++		}
++	}
++
++	if (patch) {
++		rc = kwboot_img_patch_hdr(img, size);
++		if (rc) {
++			fprintf(stderr, "%s: Invalid image.\n", imgpath);
++			goto out;
++		}
++	}
++
++	if (bootmsg) {
++		rc = kwboot_bootmsg(tty, bootmsg);
++		if (rc) {
++			perror("bootmsg");
++			goto out;
++		}
++	}
++
++	if (img) {
++		rc = kwboot_xmodem(tty, img, size);
++		if (rc) {
++			perror("xmodem");
++			goto out;
++		}
++	}
++
++	if (term) {
++		rc = kwboot_terminal(tty);
++		if (rc && !(errno == EINTR)) {
++			perror("terminal");
++			goto out;
++		}
++	}
++
++	rv = 0;
++out:
++	if (tty >= 0)
++		close(tty);
++
++	if (img)
++		munmap(img, size);
++
++	return rv;
++
++usage:
++	kwboot_usage(rv ? stderr : stdout, basename(argv[0]));
++	goto out;
++}
diff --git a/package/uboot-kirkwood/patches/0003-ide_bus.patch b/package/uboot-kirkwood/patches/0003-ide_bus.patch
new file mode 100644
index 0000000000..c94d63da9d
--- /dev/null
+++ b/package/uboot-kirkwood/patches/0003-ide_bus.patch
@@ -0,0 +1,17 @@
+http://lists.denx.de/pipermail/u-boot/2012-April/122594.html
+http://patchwork.ozlabs.org/patch/159129/
+---
+
+diff --git a/include/ide.h b/include/ide.h
+index 8ecc9dd..385e909 100644
+--- a/include/ide.h
++++ b/include/ide.h
+@@ -24,7 +24,7 @@
+ #ifndef	_IDE_H
+ #define _IDE_H
+ 
+-#define	IDE_BUS(dev)	(dev >> 1)
++#define IDE_BUS(dev)	(dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS))
+ 
+ #define	ATA_CURR_BASE(dev)	(CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+ 
diff --git a/package/uboot-kirkwood/patches/010-dockstar.patch b/package/uboot-kirkwood/patches/010-dockstar.patch
deleted file mode 100644
index e2d891d578..0000000000
--- a/package/uboot-kirkwood/patches/010-dockstar.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -251,6 +251,7 @@ guruplug	arm	arm926ejs	-		Marvell		kirkw
- mv88f6281gtw_ge	arm	arm926ejs	-		Marvell		kirkwood
- openrd_base	arm	arm926ejs	-		Marvell		kirkwood
- sheevaplug	arm	arm926ejs	-		Marvell		kirkwood
-+dockstar	arm	arm926ejs	-		Marvell		kirkwood
- imx27lite	arm	arm926ejs	imx27lite	logicpd		mx27
- magnesium	arm	arm926ejs	imx27lite	logicpd		mx27
- omap5912osk	arm	arm926ejs	-		ti		omap
diff --git a/package/uboot-kirkwood/patches/020-iconnect.patch b/package/uboot-kirkwood/patches/020-iconnect.patch
deleted file mode 100644
index 525d38544f..0000000000
--- a/package/uboot-kirkwood/patches/020-iconnect.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -252,6 +252,7 @@ mv88f6281gtw_ge	arm	arm926ejs	-		Marvell
- openrd_base	arm	arm926ejs	-		Marvell		kirkwood
- sheevaplug	arm	arm926ejs	-		Marvell		kirkwood
- dockstar	arm	arm926ejs	-		Marvell		kirkwood
-+iconnect	arm	arm926ejs	-		Marvell		kirkwood
- imx27lite	arm	arm926ejs	imx27lite	logicpd		mx27
- magnesium	arm	arm926ejs	imx27lite	logicpd		mx27
- omap5912osk	arm	arm926ejs	-		ti		omap
diff --git a/package/uboot-kirkwood/patches/100-iconnect.patch b/package/uboot-kirkwood/patches/100-iconnect.patch
new file mode 100644
index 0000000000..d2f35ad5a7
--- /dev/null
+++ b/package/uboot-kirkwood/patches/100-iconnect.patch
@@ -0,0 +1,10 @@
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -137,6 +137,7 @@ hawkboard_uart               arm
+ enbw_cmc                     arm         arm926ejs   enbw_cmc            enbw           davinci
+ calimain                     arm         arm926ejs   calimain            omicron        davinci
+ dns325                       arm         arm926ejs   -                   d-link         kirkwood
++iconnect                     arm         arm926ejs   -                   iomega         kirkwood
+ km_kirkwood                  arm         arm926ejs   km_arm              keymile        kirkwood	km_kirkwood:KM_DISABLE_PCI
+ km_kirkwood_pci              arm         arm926ejs   km_arm              keymile        kirkwood	km_kirkwood:KM_RECONFIG_XLX
+ mgcoge3un                    arm         arm926ejs   km_arm              keymile        kirkwood
diff --git a/package/uboot-kirkwood/patches/110-dockstar.patch b/package/uboot-kirkwood/patches/110-dockstar.patch
new file mode 100644
index 0000000000..4ff7e57bbb
--- /dev/null
+++ b/package/uboot-kirkwood/patches/110-dockstar.patch
@@ -0,0 +1,35 @@
+--- a/include/configs/dockstar.h
++++ b/include/configs/dockstar.h
+@@ -83,22 +83,19 @@
+  * Default environment variables
+  */
+ #define CONFIG_BOOTCOMMAND \
+-	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
+-	"ubi part root; " \
+-	"ubifsmount root; " \
+-	"ubifsload 0x800000 ${kernel}; " \
+-	"ubifsload 0x1100000 ${initrd}; " \
+-	"bootm 0x800000 0x1100000"
++	"${x_bootcmd_kernel}; "					\
++	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
++	"${x_bootcmd_usb}; bootm 0x6400000;"
+ 
+-#define CONFIG_MTDPARTS		"mtdparts=orion_nand:1m(uboot),-(root)\0"
++#define CONFIG_MTDPARTS \
++	"orion_nand:1M(u-boot),1M@1M(second_stage_u-boot),"	\
++	"3M@2M(kernel),32M@5M(rootfs),219M@37M(data) rw\0"
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+-	"console=console=ttyS0,115200\0" \
+-	"mtdids=nand0=orion_nand\0" \
+-	"mtdparts="CONFIG_MTDPARTS \
+-	"kernel=/boot/uImage\0" \
+-	"initrd=/boot/uInitrd\0" \
+-	"bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0"
++	"x_bootargs=console=ttyS0,115200 mtdparts="CONFIG_MTDPARTS	\
++	"x_bootcmd_kernel=nand read 0x6400000 0x200000 0x300000\0"	\
++	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"	\
++	"x_bootcmd_usb=usb start\0"
+ 
+ /*
+  * Ethernet Driver configuration