Add strongswan (#1330)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6429 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 660 insertions, 0 deletions

diff --git a/package/strongswan/patches/210-updown.patch b/package/strongswan/patches/210-updown.patch
new file mode 100644
index 0000000000..9361f43481
--- /dev/null
+++ b/package/strongswan/patches/210-updown.patch
@@ -0,0 +1,660 @@
+diff -ruN strongswan-2.8.2-orig/programs/_updown/_updown.8 strongswan-2.8.2/programs/_updown/_updown.8
+--- strongswan-2.8.2-orig/programs/_updown/_updown.8	2006-04-17 02:48:49.000000000 -0400
++++ strongswan-2.8.2/programs/_updown/_updown.8	2007-02-05 02:13:05.252612099 -0500
+@@ -8,8 +8,23 @@
+ .I _updown
+ is invoked by pluto when it has brought up a new connection. This script
+ is used to insert the appropriate routing entries for IPsec operation.
+-It can also be used to insert and delete dynamic iptables firewall rules.
+-The interface to the script is documented in the pluto man page.
++It also inserts and deletes dynamic iptables firewall rules. IMPORTANT!
++By default, it will ACCEPT as appropriate on the INPUT, OUTPUT, FORWARD
++tables. Most distributions will want to change that to provide more
++flexibility in their firewall configuration.
++The script looks for the environment variables
++.B IPSEC_UPDOWN_RULE_IN
++for the iptables table it should insert into,
++.B IPSEC_UPDOWN_DEST_IN
++for where the rule should -j jump to,
++.B IPSEC_UPDOWN_RULE_OUT
++.B IPSEC_UPDOWN_DEST_OUT
++for the same on outgoing packets, and
++.B IPSEC_UPDOWN_FWD_RULE_IN
++.B IPSEC_UPDOWN_FWD_DEST_IN
++.B IPSEC_UPDOWN_FWD_RULE_OUT
++.B IPSEC_UPDOWN_FWD_DEST_OUT
++respectively for packets being forwarded to/from the local networks.
+ .SH "SEE ALSO"
+ ipsec(8), ipsec_pluto(8).
+ .SH HISTORY
+diff -ruN strongswan-2.8.2-orig/programs/_updown/_updown.in strongswan-2.8.2/programs/_updown/_updown.in
+--- strongswan-2.8.2-orig/programs/_updown/_updown.in	2006-04-17 11:06:29.000000000 -0400
++++ strongswan-2.8.2/programs/_updown/_updown.in	2007-02-05 02:08:24.969100428 -0500
+@@ -5,6 +5,7 @@
+ # Copyright (C) 2003-2004 Tuomo Soini
+ # Copyright (C) 2002-2004 Michael Richardson
+ # Copyright (C) 2005-2006 Andreas Steffen <andreas.steffen@strongswan.org>
++# Copyright (C) 2007 Kevin Cody Jr <kcody@vegaresearch.com>
+ # 
+ # This program is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by the
+@@ -118,20 +119,61 @@
+ #              restricted on the peer side.
+ #
+ 
+-# uncomment to log VPN connections
+-VPN_LOGGING=1
+-#
++# set to /bin/true to silence log messages
++LOGGER=logger
++
+ # tag put in front of each log entry:
+ TAG=vpn
+-#
++
+ # syslog facility and priority used:
+-FAC_PRIO=local0.notice
+-#
+-# to create a special vpn logging file, put the following line into
+-# the syslog configuration file /etc/syslog.conf:
+-#
+-# local0.notice                   -/var/log/vpn
+-#
++FAC_PRIO=authpriv.info
++
++
++# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY 
++if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ] ; then
++	IPSEC_POLICY_IN=""
++	IPSEC_POLICY_OUT=""
++else
++	IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
++	IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
++	IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
++fi
++
++# are there port numbers?
++if [ "$PLUTO_MY_PORT" != 0 ] ; then
++	S_MY_PORT="--sport $PLUTO_MY_PORT"
++	D_MY_PORT="--dport $PLUTO_MY_PORT"
++fi
++
++if [ "$PLUTO_PEER_PORT" != 0 ] ; then
++	S_PEER_PORT="--sport $PLUTO_PEER_PORT"
++	D_PEER_PORT="--dport $PLUTO_PEER_PORT"
++fi
++
++# import firewall behavior
++IPT_RULE_IN=$IPSEC_UPDOWN_RULE_IN
++IPT_DEST_IN=$IPSEC_UPDOWN_DEST_IN
++IPT_RULE_OUT=$IPSEC_UPDOWN_RULE_OUT
++IPT_DEST_OUT=$IPSEC_UPDOWN_DEST_OUT
++
++# import forwarding behavior
++FWD_RULE_IN=$IPSEC_UPDOWN_FWD_RULE_IN
++FWD_DEST_IN=$IPSEC_UPDOWN_FWD_DEST_IN
++FWD_RULE_OUT=$IPSEC_UPDOWN_FWD_RULE_OUT
++FWD_DEST_OUT=$IPSEC_UPDOWN_FWD_DEST_OUT
++
++# default firewall behavior
++[ -z "$IPT_RULE_IN"  ] && IPT_RULE_IN=INPUT
++[ -z "$IPT_DEST_IN"  ] && IPT_DEST_IN=ACCEPT
++[ -z "$IPT_RULE_OUT" ] && IPT_RULE_OUT=OUTPUT
++[ -z "$IPT_DEST_OUT" ] && IPT_DEST_OUT=ACCEPT
++
++# default forwarding behavior
++[ -z "$FWD_RULE_IN"  ] && FWD_RULE_IN=FORWARD
++[ -z "$FWD_DEST_IN"  ] && FWD_DEST_IN=ACCEPT
++[ -z "$FWD_RULE_OUT" ] && FWD_RULE_OUT=FORWARD
++[ -z "$FWD_DEST_OUT" ] && FWD_DEST_OUT=ACCEPT
++
+ 
+ # check interface version
+ case "$PLUTO_VERSION" in
+@@ -150,8 +192,6 @@
+ case "$1:$*" in
+ ':')			# no parameters
+ 	;;
+-iptables:iptables)	# due to (left/right)firewall; for default script only
+-	;;
+ custom:*)		# custom parameters (see above CAUTION comment)
+ 	;;
+ *)	echo "$0: unknown parameters \`$*'" >&2
+@@ -159,345 +199,307 @@
+ 	;;
+ esac
+ 
++
+ # utility functions for route manipulation
+ # Meddling with this stuff should not be necessary and requires great care.
++
+ uproute() {
+ 	doroute add
+ 	ip route flush cache
+ }
++
+ downroute() {
+ 	doroute delete
+ 	ip route flush cache
+ }
+ 
++upfirewall() {
++	in_rule=$1
++	in_dest=$2
++	out_rule=$3
++	out_dest=$4
++
++	[ -n "$in_rule" -a -n "$in_dest" ] &&		\
++	iptables -I $in_rule 1				\
++		-i $PLUTO_INTERFACE			\
++		-p $PLUTO_MY_PROTOCOL			\
++		-s $PLUTO_PEER_CLIENT	$S_PEER_PORT	\
++		-d $PLUTO_MY_CLIENT	$D_MY_PORT	\
++		$IPSEC_POLICY_IN			\
++		-j $in_dest
++
++	[ -n "$out_rule" -a -n "$out_dest" ] &&		\
++	iptables -I $out_rule 1				\
++		-o $PLUTO_INTERFACE			\
++		-p $PLUTO_PEER_PROTOCOL			\
++		-s $PLUTO_MY_CLIENT	$S_MY_PORT	\
++		-d $PLUTO_PEER_CLIENT	$D_PEER_PORT	\
++		$IPSEC_POLICY_OUT			\
++		-j $out_dest
++
++}
++
++downfirewall() {
++	in_rule=$1
++	in_dest=$2
++	out_rule=$3
++	out_dest=$4
++
++	[ -n "$in_rule" -a -n "$in_dest" ] &&		\
++	iptables -D $in_rule				\
++		-i $PLUTO_INTERFACE			\
++		-p $PLUTO_MY_PROTOCOL			\
++		-s $PLUTO_PEER_CLIENT	$S_PEER_PORT	\
++		-d $PLUTO_MY_CLIENT	$D_MY_PORT	\
++		$IPSEC_POLICY_IN			\
++		-j $in_dest
++
++	[ -n "$out_rule" -a -n "$out_dest" ] &&		\
++	iptables -D $out_rule				\
++		-o $PLUTO_INTERFACE			\
++		-p $PLUTO_PEER_PROTOCOL			\
++		-s $PLUTO_MY_CLIENT	$S_MY_PORT	\
++		-d $PLUTO_PEER_CLIENT	$D_PEER_PORT	\
++		$IPSEC_POLICY_OUT			\
++		-j $out_dest
++
++}
++
+ addsource() {
+ 	st=0
+-	if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local
+-	then
++
++	if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local ; then
++
+ 	    it="ip addr add ${PLUTO_MY_SOURCEIP%/*}/32 dev $PLUTO_INTERFACE"
+ 	    oops="`eval $it 2>&1`"
+ 	    st=$?
+-	    if test " $oops" = " " -a " $st" != " 0"
+-	    then
++
++	    if [ " $oops"  = " " -a " $st" != " 0" ] ; then
+ 		oops="silent error, exit status $st"
+ 	    fi
+-	    if test " $oops" != " " -o " $st" != " 0"
+-	    then
++
++	    if [ " $oops" != " " -o " $st" != " 0" ] ; then
+ 		echo "$0: addsource \`$it' failed ($oops)" >&2
+ 	    fi
+ 	fi
++
+ 	return $st
+ }
+ 
+ doroute() {
+ 	st=0
+ 	parms="$PLUTO_PEER_CLIENT"
++	parms2="dev $PLUTO_INTERFACE"
+ 
+-	parms2=
+-	if [ -n "$PLUTO_NEXT_HOP" ]
+-	then
+-	   parms2="via $PLUTO_NEXT_HOP"
+-	fi
+-	parms2="$parms2 dev $PLUTO_INTERFACE"
+-
+-	if [ -z "$PLUTO_MY_SOURCEIP" ]
+-	then
+-	    if [ -f /etc/sysconfig/defaultsource ]
+-	    then
+-		. /etc/sysconfig/defaultsource
+-	    fi
++	if [ -z "$PLUTO_MY_SOURCEIP" ] ; then
+ 
+-	    if [ -f /etc/conf.d/defaultsource ]
+-	    then
+-		. /etc/conf.d/defaultsource
+-	    fi
++		[ -f /etc/sysconfig/defaultsource ] && \
++			. /etc/sysconfig/defaultsource
++
++		[ -f /etc/conf.d/defaultsource ] && \
++			. /etc/conf.d/defaultsource
++
++	    	[ -n "$DEFAULTSOURCE" ]	&& \
++			PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
+ 
+-	    if [ -n "$DEFAULTSOURCE" ]
+-	    then
+-		PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
+-	    fi
+         fi
+ 
+ 	parms3=
+-	if test "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP"
+-	then
++	if [ "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP" ] ; then
+ 	    addsource
+ 	    parms3="$parms3 src ${PLUTO_MY_SOURCEIP%/*}"
+ 	fi
+ 
+-	case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
+-	"0.0.0.0/0.0.0.0")
++	if [ "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" = \
++						"0.0.0.0/0.0.0.0" ] ; then
+ 		# opportunistic encryption work around
+ 		# need to provide route that eclipses default, without 
+ 		# replacing it.
+-		it="ip route $1 0.0.0.0/1 $parms2 $parms3 &&
+-			ip route $1 128.0.0.0/1 $parms2 $parms3"
+-		;;
+-	*)	it="ip route $1 $parms $parms2 $parms3"
+-		;;
+-	esac
++		it="ip route $1   0.0.0.0/1 $parms2 $parms3 &&
++		    ip route $1 128.0.0.0/1 $parms2 $parms3"
++	else
++		it="ip route $1 $parms $parms2 $parms3"
++	fi
++
+ 	oops="`eval $it 2>&1`"
+ 	st=$?
+-	if test " $oops" = " " -a " $st" != " 0"
+-	then
+-	    oops="silent error, exit status $st"
+-	fi
+-	if test " $oops" != " " -o " $st" != " 0"
+-	then
+-	    echo "$0: doroute \`$it' failed ($oops)" >&2
++
++	if [ " $oops" = " " -a " $st" != " 0" ] ; then
++		oops="silent error, exit status $st"
+ 	fi
++
++	if [ " $oops" != " " -o " $st" != " 0" ] ; then
++		echo "$0: doroute \`$it' failed ($oops)" >&2
++	fi
++
+ 	return $st
+ }
+- 
+-# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY 
+-if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ]
+-then
+-	IPSEC_POLICY_IN=""
+-	IPSEC_POLICY_OUT=""
+-else
+-	IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
+-	IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
+-	IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
+-fi
+ 
+-# are there port numbers?
+-if [ "$PLUTO_MY_PORT" != 0 ]
+-then
+-	S_MY_PORT="--sport $PLUTO_MY_PORT"
+-	D_MY_PORT="--dport $PLUTO_MY_PORT"
+-fi
+-if [ "$PLUTO_PEER_PORT" != 0 ]
+-then
+-	S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+-	D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+-fi
++dologentry() {
++	action=$1
++
++	if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ] ; then
++		rem="$PLUTO_PEER"
++	else
++		rem="$PLUTO_PEER_CLIENT == $PLUTO_PEER"
++	fi
++
++	if [ "$PLUTO_MY_CLIENT" == "$PLUTO_ME/32" ] ; then
++		loc="$PLUTO_ME"
++	else
++		loc="$PLUTO_ME == $PLUTO_MY_CLIENT"
++	fi
++
++	$LOGGER -t $TAG -p $FAC_PRIO "$action $rem -- $loc ($PLUTO_PEER_ID)"
++}
++
+ 
+ # the big choice
++
+ case "$PLUTO_VERB:$1" in
+ prepare-host:*|prepare-client:*)
+ 	# delete possibly-existing route (preliminary to adding a route)
+-	case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
+-	"0.0.0.0/0.0.0.0")
+-		# need to provide route that eclipses default, without 
++
++	if [ "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" = \
++						"0.0.0.0/0.0.0.0" ] ; then
++		# need to remove the route that eclipses default, without 
+ 		# replacing it.
+-		parms1="0.0.0.0/1"
+-		parms2="128.0.0.0/1"
+-		it="ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1"
+-		oops="`ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1`"
+-		;;
+-	*)
+-		parms="$PLUTO_PEER_CLIENT"
+-		it="ip route delete $parms 2>&1"
+-		oops="`ip route delete $parms 2>&1`"
+-		;;
+-	esac
+-	status="$?"
+-	if test " $oops" = " " -a " $status" != " 0"
+-	then
+-		oops="silent error, exit status $status"
++		it="( ip route delete   0.0.0.0/1 ;
++		      ip route delete 128.0.0.0/1 )"
++	else
++		it="ip route delete $PLUTO_PEER_CLIENT"
++	fi
++
++	oops="`$it 2>&1`"
++	st="$?"
++
++	if [ " $oops" = " " -a " $st" != " 0" ] ; then
++		oops="silent error, exit status $st"
+ 	fi
++
+ 	case "$oops" in
+ 	*'RTNETLINK answers: No such process'*)	
+ 		# This is what route (currently -- not documented!) gives
+ 		# for "could not find such a route".
+ 		oops=
+-		status=0
++		st=0
+ 		;;
+ 	esac
+-	if test " $oops" != " " -o " $status" != " 0"
+-	then
++
++	if [ " $oops" != " " -o " $st" != " 0" ] ; then
+ 		echo "$0: \`$it' failed ($oops)" >&2
+ 	fi
+-	exit $status
++
++	exit $st
++
+ 	;;
+ route-host:*|route-client:*)
+ 	# connection to me or my client subnet being routed
++
++	ipsec _showstatus valid
+ 	uproute
++
+ 	;;
+ unroute-host:*|unroute-client:*)
+ 	# connection to me or my client subnet being unrouted
++
++	ipsec _showstatus invalid
+ 	downroute
++
+ 	;;
+-up-host:)
++up-host:*)
+ 	# connection to me coming up
+-	# If you are doing a custom version, firewall commands go here.
++
++	ipsec _showstatus up
++	upfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
++	dologentry "VPN-UP"
++
+ 	;;
+-down-host:)
++down-host:*)
+ 	# connection to me going down
+-	# If you are doing a custom version, firewall commands go here.
+-	;;
+-up-client:)
+-	# connection to my client subnet coming up
+-	# If you are doing a custom version, firewall commands go here.
+-	;;
+-down-client:)
+-	# connection to my client subnet going down
+-	# If you are doing a custom version, firewall commands go here.
++
++	ipsec _showstatus down
++	downfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
++	dologentry "VPN-DN"
++
+ 	;;
+-up-host:iptables)
+-	# connection to me, with (left/right)firewall=yes, coming up
+-	# This is used only by the default updown script, not by your custom
+-	# ones, so do not mess with it; see CAUTION comment up at top.
+-	iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+-	    -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+-	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+-	iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+-	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+-	    -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
+-	#
+-	# log IPsec host connection setup
+-	if [ $VPN_LOGGING ]
+-	then
+-	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
+-	  then
+-	    logger -t $TAG -p $FAC_PRIO \
+-	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
+-	  else
+-	    logger -t $TAG -p $FAC_PRIO \
+-	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+-	  fi
+-	fi	
+-	;;
+-down-host:iptables)
+-	# connection to me, with (left/right)firewall=yes, going down
+-	# This is used only by the default updown script, not by your custom
+-	# ones, so do not mess with it; see CAUTION comment up at top.
+-	iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+-	    -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+-	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+-	iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+-	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+-	    -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
+-	#
+-	# log IPsec host connection teardown
+-	if [ $VPN_LOGGING ]
+-	then
+-	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
+-	  then
+-	    logger -t $TAG -p $FAC_PRIO -- \
+-	      "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
+-	  else
+-	    logger -t $TAG -p $FAC_PRIO -- \
+-	    "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+-	  fi
+-	fi
+-	;;
+-up-client:iptables)
+-	# connection to client subnet, with (left/right)firewall=yes, coming up
+-	# This is used only by the default updown script, not by your custom
+-	# ones, so do not mess with it; see CAUTION comment up at top.
+-	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+-	then
+-	  iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+-	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
+-	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
+-	         $IPSEC_POLICY_OUT -j ACCEPT
+-	  iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+-	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+-	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
+-	         $IPSEC_POLICY_IN -j ACCEPT
++up-client:*)
++	# connection to client subnet coming up
++
++	ipsec _showstatus up
++
++	if [ "$PLUTO_MY_CLIENT" != "$PLUTO_ME/32" -a \
++	     "$PLUTO_MY_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ] ; then
++		upfirewall $FWD_RULE_IN $FWD_DEST_IN $FWD_RULE_OUT $FWD_DEST_OUT
+ 	fi
+-	#
++
+ 	# a virtual IP requires an INPUT and OUTPUT rule on the host
+ 	# or sometimes host access via the internal IP is needed
+-	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+-	then
+-	  iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+-	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+-	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
+-	         $IPSEC_POLICY_IN -j ACCEPT
+-	  iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+-	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
+-	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
+-	         $IPSEC_POLICY_OUT -j ACCEPT
+-	fi
+-	#
+-	# log IPsec client connection setup
+-	if [ $VPN_LOGGING ]
+-	then
+-	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
+-	  then
+-	    logger -t $TAG -p $FAC_PRIO \
+-	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+-	  else
+-	    logger -t $TAG -p $FAC_PRIO \
+-	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+-	  fi
+-	fi
+-	;;
+-down-client:iptables)
+-	# connection to client subnet, with (left/right)firewall=yes, going down
+-	# This is used only by the default updown script, not by your custom
+-	# ones, so do not mess with it; see CAUTION comment up at top.
+-	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+-	then
+-	  iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+-	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
+-	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
+-	         $IPSEC_POLICY_OUT -j ACCEPT
+-	  iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+-	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+-	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
+-	         $IPSEC_POLICY_IN -j ACCEPT
++	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] ; then
++		upfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
++	fi
++
++	dologentry "VPN-UP"
++
++	;;
++down-client:*)
++	# connection to client subnet going down
++
++	ipsec _showstatus down
++
++	if [ "$PLUTO_MY_CLIENT" != "$PLUTO_ME/32" -a \
++	     "$PLUTO_MY_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ] ; then
++		downfirewall $FWD_RULE_IN $FWD_DEST_IN $FWD_RULE_OUT $FWD_DEST_OUT
+ 	fi
+-	#
++
+ 	# a virtual IP requires an INPUT and OUTPUT rule on the host
+ 	# or sometimes host access via the internal IP is needed
+-	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+-	then
+-	  iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+-	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+-	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
+-	         $IPSEC_POLICY_IN -j ACCEPT
+-	  iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+-	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
+-	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
+-	         $IPSEC_POLICY_OUT -j ACCEPT
+-	fi
+-	#
+-	# log IPsec client connection teardown
+-	if [ $VPN_LOGGING ]
+-	then
+-	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
+-	  then
+-	    logger -t $TAG -p $FAC_PRIO -- \
+-	      "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+-	  else
+-	    logger -t $TAG -p $FAC_PRIO -- \
+-	      "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+-	  fi
++	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] ; then
++		downfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
+ 	fi
++
++	dologentry "VPN-DN"
++
+ 	;;
+-#
+-# IPv6
+-#
+ prepare-host-v6:*|prepare-client-v6:*)
++
+ 	;;
+ route-host-v6:*|route-client-v6:*)
+ 	# connection to me or my client subnet being routed
++
+ 	#uproute_v6
++
+ 	;;
+ unroute-host-v6:*|unroute-client-v6:*)
+ 	# connection to me or my client subnet being unrouted
++
+ 	#downroute_v6
++
+ 	;;
+ up-host-v6:*)
+ 	# connection to me coming up
+ 	# If you are doing a custom version, firewall commands go here.
++
+ 	;;
+ down-host-v6:*)
+ 	# connection to me going down
+ 	# If you are doing a custom version, firewall commands go here.
++
+ 	;;
+ up-client-v6:)
+ 	# connection to my client subnet coming up
+ 	# If you are doing a custom version, firewall commands go here.
++
+ 	;;
+ down-client-v6:)
+ 	# connection to my client subnet going down
+ 	# If you are doing a custom version, firewall commands go here.
++
+ 	;;
+-*)	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
++*)
++	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
+ 	exit 1
++
+ 	;;
+ esac
++