packages: sort network related packages into package/network/

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33688 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 1644 insertions, 0 deletions

diff --git a/package/network/services/hostapd/files/hostapd-full.config b/package/network/services/hostapd/files/hostapd-full.config
new file mode 100644
index 0000000000..3a0ce12fc4
--- /dev/null
+++ b/package/network/services/hostapd/files/hostapd-full.config
@@ -0,0 +1,164 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for madwifi driver
+CONFIG_DRIVER_MADWIFI=y
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
+# shipped with your distribution yet. If that is the case, you need to build
+# newer libnl version and point the hostapd build to use it.
+#LIBNL=/usr/src/libnl
+#CFLAGS += -I$(LIBNL)/include
+#LIBS += -L$(LIBNL)/lib
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Integrated EAP server
+CONFIG_EAP=y
+
+# EAP-MD5 for the integrated EAP server
+CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove support for RADIUS accounting
+#CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+#CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+CONFIG_TLS=internal
+CONFIG_INTERNAL_LIBTOMMATH=y
+CONFIG_INTERNAL_AES=y
+NEED_AES_DEC=y
+
+CONFIG_NO_DUMP_STATE=y
+
+CONFIG_WPS=y
+CONFIG_FULL_DYNAMIC_VLAN=y
+
diff --git a/package/network/services/hostapd/files/hostapd-mini.config b/package/network/services/hostapd/files/hostapd-mini.config
new file mode 100644
index 0000000000..3e94a645b5
--- /dev/null
+++ b/package/network/services/hostapd/files/hostapd-mini.config
@@ -0,0 +1,157 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for madwifi driver
+CONFIG_DRIVER_MADWIFI=y
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
+# shipped with your distribution yet. If that is the case, you need to build
+# newer libnl version and point the hostapd build to use it.
+#LIBNL=/usr/src/libnl
+#CFLAGS += -I$(LIBNL)/include
+#LIBS += -L$(LIBNL)/lib
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+# CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Integrated EAP server
+#CONFIG_EAP=y
+
+# EAP-MD5 for the integrated EAP server
+#CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+#CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+#CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+#CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+#CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+#CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove support for RADIUS accounting
+CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+CONFIG_TLS=internal
+
+CONFIG_NO_DUMP_STATE=y
diff --git a/package/network/services/hostapd/files/hostapd.sh b/package/network/services/hostapd/files/hostapd.sh
new file mode 100644
index 0000000000..d60c26f3c6
--- /dev/null
+++ b/package/network/services/hostapd/files/hostapd.sh
@@ -0,0 +1,276 @@
+hostapd_set_bss_options() {
+	local var="$1"
+	local vif="$2"
+	local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible
+
+	config_get enc "$vif" encryption
+	config_get wep_rekey        "$vif" wep_rekey        # 300
+	config_get wpa_group_rekey  "$vif" wpa_group_rekey  # 300
+	config_get wpa_pair_rekey   "$vif" wpa_pair_rekey   # 300
+	config_get wpa_master_rekey "$vif" wpa_master_rekey # 640
+	config_get_bool ap_isolate "$vif" isolate 0
+	config_get_bool disassoc_low_ack "$vif" disassoc_low_ack 1
+	config_get max_num_sta "$vif" max_num_sta 0
+	config_get max_inactivity "$vif" max_inactivity 0
+
+	config_get device "$vif" device
+	config_get hwmode "$device" hwmode
+	config_get phy "$device" phy
+
+	append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N"
+
+	if [ "$ap_isolate" -gt 0 ]; then
+		append "$var" "ap_isolate=$ap_isolate" "$N"
+	fi
+	if [ "$max_num_sta" -gt 0 ]; then
+		append "$var" "max_num_sta=$max_num_sta" "$N"
+	fi
+	if [ "$max_inactivity" -gt 0 ]; then
+		append "$var" "ap_max_inactivity=$max_inactivity" "$N"
+	fi
+	append "$var" "disassoc_low_ack=$disassoc_low_ack" "$N"
+
+	# Examples:
+	# psk-mixed/tkip 	=> WPA1+2 PSK, TKIP
+	# wpa-psk2/tkip+aes	=> WPA2 PSK, CCMP+TKIP
+	# wpa2/tkip+aes 	=> WPA2 RADIUS, CCMP+TKIP
+	# ...
+
+	# TODO: move this parsing function somewhere generic, so that
+	# later it can be reused by drivers that don't use hostapd
+
+	# crypto defaults: WPA2 vs WPA1
+	case "$enc" in
+		wpa2*|*psk2*)
+			wpa=2
+			crypto="CCMP"
+		;;
+		*mixed*)
+			wpa=3
+			crypto="CCMP TKIP"
+		;;
+		*)
+			wpa=1
+			crypto="TKIP"
+		;;
+	esac
+
+	# explicit override for crypto setting
+	case "$enc" in
+		*tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";;
+		*aes|*ccmp) crypto="CCMP";;
+		*tkip) crypto="TKIP";;
+	esac
+
+	# enforce CCMP for 11ng and 11na
+	case "$hwmode:$crypto" in
+		*ng:TKIP|*na:TKIP) crypto="CCMP TKIP";;
+	esac
+
+	# use crypto/auth settings for building the hostapd config
+	case "$enc" in
+		*psk*)
+			config_get psk "$vif" key
+			if [ ${#psk} -eq 64 ]; then
+				append "$var" "wpa_psk=$psk" "$N"
+			else
+				append "$var" "wpa_passphrase=$psk" "$N"
+			fi
+			wps_possible=1
+			[ -n "$wpa_group_rekey"  ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+			[ -n "$wpa_pair_rekey"   ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
+			[ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
+		;;
+		*wpa*)
+			# required fields? formats?
+			# hostapd is particular, maybe a default configuration for failures
+			config_get auth_server "$vif" auth_server
+			[ -z "$auth_server" ] && config_get auth_server "$vif" server
+			append "$var" "auth_server_addr=$auth_server" "$N"
+			config_get auth_port "$vif" auth_port
+			[ -z "$auth_port" ] && config_get auth_port "$vif" port
+			auth_port=${auth_port:-1812}
+			append "$var" "auth_server_port=$auth_port" "$N"
+			config_get auth_secret "$vif" auth_secret
+			[ -z "$auth_secret" ] && config_get auth_secret "$vif" key
+			append "$var" "auth_server_shared_secret=$auth_secret" "$N"
+			config_get_bool auth_cache "$vif" auth_cache 0
+			[ "$auth_cache" -gt 0 ] || append "$var" "disable_pmksa_caching=1" "$N"
+			[ "$auth_cache" -gt 0 ] || append "$var" "okc=0" "$N"
+			config_get acct_server "$vif" acct_server
+			[ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N"
+			config_get acct_port "$vif" acct_port
+			[ -n "$acct_port" ] && acct_port=${acct_port:-1813}
+			[ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N"
+			config_get acct_secret "$vif" acct_secret
+			[ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N"
+			config_get nasid "$vif" nasid
+			append "$var" "nas_identifier=$nasid" "$N"
+			append "$var" "eapol_key_index_workaround=1" "$N"
+			append "$var" "ieee8021x=1" "$N"
+			append "$var" "wpa_key_mgmt=WPA-EAP" "$N"
+			[ -n "$wpa_group_rekey"  ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+			[ -n "$wpa_pair_rekey"   ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
+			[ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
+		;;
+		*wep*)
+			config_get key "$vif" key
+			key="${key:-1}"
+			case "$key" in
+				[1234])
+					for idx in 1 2 3 4; do
+						local zidx
+						zidx=$(($idx - 1))
+						config_get ckey "$vif" "key${idx}"
+						[ -n "$ckey" ] && \
+							append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N"
+					done
+					append "$var" "wep_default_key=$((key - 1))"  "$N"
+				;;
+				*)
+					append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N"
+					append "$var" "wep_default_key=0" "$N"
+					[ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N"
+				;;
+			esac
+			case "$enc" in
+				*shared*)
+					auth_algs=2
+				;;
+				*mixed*)
+					auth_algs=3
+				;;
+			esac
+			wpa=0
+			crypto=
+		;;
+		*)
+			wpa=0
+			crypto=
+		;;
+	esac
+	append "$var" "auth_algs=${auth_algs:-1}" "$N"
+	append "$var" "wpa=$wpa" "$N"
+	[ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N"
+	[ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+
+	config_get ssid "$vif" ssid
+	config_get bridge "$vif" bridge
+	config_get ieee80211d "$vif" ieee80211d
+	config_get iapp_interface "$vif" iapp_interface
+
+	config_get_bool wps_pbc "$vif" wps_pushbutton 0
+	config_get_bool wps_label "$vif" wps_label 0
+
+	config_get config_methods "$vif" wps_config
+	[ "$wps_pbc" -gt 0 ] && append config_methods push_button
+
+	[ -n "$wps_possible" -a -n "$config_methods" ] && {
+		config_get device_type "$vif" wps_device_type "6-0050F204-1"
+		config_get device_name "$vif" wps_device_name "OpenWrt AP"
+		config_get manufacturer "$vif" wps_manufacturer "openwrt.org"
+
+		append "$var" "eap_server=1" "$N"
+		append "$var" "wps_state=2" "$N"
+		append "$var" "ap_setup_locked=1" "$N"
+		append "$var" "device_type=$device_type" "$N"
+		append "$var" "device_name=$device_name" "$N"
+		append "$var" "manufacturer=$manufacturer" "$N"
+		append "$var" "config_methods=$config_methods" "$N"
+	}
+
+	append "$var" "ssid=$ssid" "$N"
+	[ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N"
+	[ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N"
+	[ -n "$iapp_interface" ] && append "$var" iapp_interface=$(uci_get_state network "$iapp_interface" ifname "$iapp_interface") "$N"
+
+	if [ "$wpa" -ge "2" ]
+	then
+		# RSN -> allow preauthentication
+		config_get_bool rsn_preauth "$vif" rsn_preauth "$auth_cache"
+		if [ -n "$bridge" -a "$rsn_preauth" = 1 ]
+		then
+			append "$var" "rsn_preauth=1" "$N"
+			append "$var" "rsn_preauth_interfaces=$bridge" "$N"
+		fi
+
+		# RSN -> allow management frame protection
+		config_get ieee80211w "$vif" ieee80211w
+		case "$ieee80211w" in
+			[012])
+				append "$var" "ieee80211w=$ieee80211w" "$N"
+				[ "$ieee80211w" -gt "0" ] && {
+					config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout
+					config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout
+					[ -n "$ieee80211w_max_timeout" ] && \
+						append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
+					[ -n "$ieee80211w_retry_timeout" ] && \
+						append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
+				}
+			;;
+		esac
+	fi
+}
+
+hostapd_set_log_options() {
+	local var="$1"
+	local cfg="$2"
+	local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
+
+	config_get log_level "$cfg" log_level 2
+
+	config_get_bool log_80211  "$cfg" log_80211  1
+	config_get_bool log_8021x  "$cfg" log_8021x  1
+	config_get_bool log_radius "$cfg" log_radius 1
+	config_get_bool log_wpa    "$cfg" log_wpa    1
+	config_get_bool log_driver "$cfg" log_driver 1
+	config_get_bool log_iapp   "$cfg" log_iapp   1
+	config_get_bool log_mlme   "$cfg" log_mlme   1
+
+	local log_mask=$((       \
+		($log_80211  << 0) | \
+		($log_8021x  << 1) | \
+		($log_radius << 2) | \
+		($log_wpa    << 3) | \
+		($log_driver << 4) | \
+		($log_iapp   << 5) | \
+		($log_mlme   << 6)   \
+	))
+
+	append "$var" "logger_syslog=$log_mask" "$N"
+	append "$var" "logger_syslog_level=$log_level" "$N"
+	append "$var" "logger_stdout=$log_mask" "$N"
+	append "$var" "logger_stdout_level=$log_level" "$N"
+}
+
+hostapd_setup_vif() {
+	local vif="$1"
+	local driver="$2"
+	local ifname device channel hwmode
+
+	hostapd_cfg=
+
+	config_get ifname "$vif" ifname
+	config_get device "$vif" device
+	config_get channel "$device" channel
+	config_get hwmode "$device" hwmode
+
+	hostapd_set_log_options hostapd_cfg "$device"
+	hostapd_set_bss_options hostapd_cfg "$vif"
+
+	case "$hwmode" in
+		*bg|*gdt|*gst|*fh) hwmode=g;;
+		*adt|*ast) hwmode=a;;
+	esac
+	[ "$channel" = auto ] && channel=
+	[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
+	cat > /var/run/hostapd-$ifname.conf <<EOF
+driver=$driver
+interface=$ifname
+${hwmode:+hw_mode=${hwmode#11}}
+${channel:+channel=$channel}
+$hostapd_cfg
+EOF
+	hostapd -P /var/run/wifi-$ifname.pid -B /var/run/hostapd-$ifname.conf
+}
+
diff --git a/package/network/services/hostapd/files/multicall.c b/package/network/services/hostapd/files/multicall.c
new file mode 100644
index 0000000000..c8e814bb5c
--- /dev/null
+++ b/package/network/services/hostapd/files/multicall.c
@@ -0,0 +1,28 @@
+#include <stdio.h>
+#include <string.h>
+#include <stdbool.h>
+
+extern int hostapd_main(int argc, char **argv);
+extern int wpa_supplicant_main(int argc, char **argv);
+
+int main(int argc, char **argv)
+{
+	bool restart = false;
+	const char *prog = argv[0];
+
+restart:
+	if (strstr(argv[0], "hostapd"))
+		return hostapd_main(argc, argv);
+	else if (strstr(argv[0], "wpa_supplicant"))
+		return wpa_supplicant_main(argc, argv);
+
+	if (!restart && argc > 1) {
+		argv++;
+		argc--;
+		restart = true;
+		goto restart;
+	}
+
+	fprintf(stderr, "Invalid command.\nUsage: %s wpa_supplicant|hostapd [<arguments>]\n", prog);
+	return 255;
+}
diff --git a/package/network/services/hostapd/files/wpa_supplicant-full.config b/package/network/services/hostapd/files/wpa_supplicant-full.config
new file mode 100644
index 0000000000..f5abbad94f
--- /dev/null
+++ b/package/network/services/hostapd/files/wpa_supplicant-full.config
@@ -0,0 +1,408 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+#	-I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Include client MLME (management frame processing) for test driver
+# This can be used to test MLME operations in hostapd with the test interface.
+# space.
+#CONFIG_CLIENT_MLME=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+#CONFIG_GNUTLS_EXTRA=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+NEED_80211_COMMON=y
+
+CONFIG_IBSS_RSN=y
diff --git a/package/network/services/hostapd/files/wpa_supplicant-mini.config b/package/network/services/hostapd/files/wpa_supplicant-mini.config
new file mode 100644
index 0000000000..772e1d9809
--- /dev/null
+++ b/package/network/services/hostapd/files/wpa_supplicant-mini.config
@@ -0,0 +1,406 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+#	-I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Include client MLME (management frame processing) for test driver
+# This can be used to test MLME operations in hostapd with the test interface.
+# space.
+#CONFIG_CLIENT_MLME=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+# CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+# CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+# CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+# CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+# CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+# CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+# CONFIG_EAP_GTC=y
+
+# EAP-OTP
+# CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+# CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+# CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+# CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+# CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+#CONFIG_GNUTLS_EXTRA=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+NEED_80211_COMMON=y
diff --git a/package/network/services/hostapd/files/wpa_supplicant.sh b/package/network/services/hostapd/files/wpa_supplicant.sh
new file mode 100644
index 0000000000..928243e425
--- /dev/null
+++ b/package/network/services/hostapd/files/wpa_supplicant.sh
@@ -0,0 +1,199 @@
+wpa_supplicant_setup_vif() {
+	local vif="$1"
+	local driver="$2"
+	local key="$key"
+	local options="$3"
+	local freq=""
+	local ht="$5"
+	local ap_scan=""
+	local scan_ssid="1"
+	[ -n "$4" ] && freq="frequency=$4"
+
+	# make sure we have the encryption type and the psk
+	[ -n "$enc" ] || {
+		config_get enc "$vif" encryption
+	}
+	[ -n "$key" ] || {
+		config_get key "$vif" key
+	}
+
+	local net_cfg bridge
+	config_get bridge "$vif" bridge
+	[ -z "$bridge" ] && {
+		net_cfg="$(find_net_config "$vif")"
+		[ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
+		config_set "$vif" bridge "$bridge"
+	}
+
+	local mode ifname wds modestr=""
+	config_get mode "$vif" mode
+	config_get ifname "$vif" ifname
+	config_get_bool wds "$vif" wds 0
+	[ -z "$bridge" ] || [ "$mode" = ap ] || [ "$mode" = sta -a $wds -eq 1 ] || {
+		echo "wpa_supplicant_setup_vif($ifname): Refusing to bridge $mode mode interface"
+		return 1
+	}
+	[ "$mode" = "adhoc" ] && {
+		modestr="mode=1"
+		scan_ssid="0"
+		ap_scan="ap_scan=2"
+	}
+
+	key_mgmt='NONE'
+	case "$enc" in
+		*none*) ;;
+		*wep*)
+			config_get key "$vif" key
+			key="${key:-1}"
+			case "$key" in
+				[1234])
+					for idx in 1 2 3 4; do
+						local zidx
+						zidx=$(($idx - 1))
+						config_get ckey "$vif" "key${idx}"
+						[ -n "$ckey" ] && \
+							append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")"
+					done
+					wep_tx_keyidx="wep_tx_keyidx=$((key - 1))"
+				;;
+				*)
+					wep_key0="wep_key0=$(prepare_key_wep "$key")"
+					wep_tx_keyidx="wep_tx_keyidx=0"
+				;;
+			esac
+		;;
+		*psk*)
+			key_mgmt='WPA-PSK'
+			# if you want to use PSK with a non-nl80211 driver you
+			# have to use WPA-NONE and wext driver for wpa_s
+			[ "$mode" = "adhoc" -a "$driver" != "nl80211" ] && {
+				key_mgmt='WPA-NONE'
+				driver='wext'
+			}
+			if [ ${#key} -eq 64 ]; then
+				passphrase="psk=${key}"
+			else
+				passphrase="psk=\"${key}\""
+			fi
+			case "$enc" in
+				*psk2*)
+					proto='proto=RSN'
+					config_get ieee80211w "$vif" ieee80211w
+				;;
+				*psk*)
+					proto='proto=WPA'
+				;;
+			esac
+		;;
+		*wpa*|*8021x*)
+			proto='proto=WPA2'
+			key_mgmt='WPA-EAP'
+			config_get ieee80211w "$vif" ieee80211w
+			config_get ca_cert "$vif" ca_cert
+			config_get eap_type "$vif" eap_type
+			ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""}
+			case "$eap_type" in
+				tls)
+					pairwise='pairwise=CCMP'
+					group='group=CCMP'
+					config_get identity "$vif" identity
+					config_get client_cert "$vif" client_cert
+					config_get priv_key "$vif" priv_key
+					config_get priv_key_pwd "$vif" priv_key_pwd
+					identity="identity=\"$identity\""
+					client_cert="client_cert=\"$client_cert\""
+					priv_key="private_key=\"$priv_key\""
+					priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
+				;;
+				peap|ttls)
+					config_get auth "$vif" auth
+					config_get identity "$vif" identity
+					config_get password "$vif" password
+					phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
+					identity="identity=\"$identity\""
+					password="password=\"$password\""
+				;;
+			esac
+			eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')"
+		;;
+	esac
+
+	case "$ieee80211w" in
+		[012])
+			ieee80211w="ieee80211w=$ieee80211w"
+		;;
+	esac
+
+	local fixed_freq bssid1 beacon_interval brates mrate
+	config_get ifname "$vif" ifname
+	config_get bridge "$vif" bridge
+	config_get ssid "$vif" ssid
+	config_get bssid "$vif" bssid
+	bssid1=${bssid:+"bssid=$bssid"}
+	beacon_interval=${beacon_int:+"beacon_interval=$beacon_int"}
+
+	local br brval brsub brstr
+	[ -n "$basic_rate_list" ] && {
+		for br in $basic_rate_list; do
+			brval="$(($br / 1000))"
+			brsub="$((($br / 100) % 10))"
+			[ "$brsub" -gt 0 ] && brval="$brval.$brsub"
+			[ -n "$brstr" ] && brstr="$brstr,"
+			brstr="$brstr$brval"
+		done
+		brates=${basic_rate_list:+"rates=$brstr"}
+	}
+
+	local mcval=""
+	[ -n "$mcast_rate" ] && {
+		mcval="$(($mcast_rate / 1000))"
+		mcsub="$(( ($mcast_rate / 100) % 10 ))"
+		[ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
+		mrate=${mcast_rate:+"mcast_rate=$mcval"}
+	}
+
+	local ht_str
+	[ -n "$ht" ] && ht_str="htmode=$ht"
+
+	rm -rf /var/run/wpa_supplicant-$ifname
+	cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
+ctrl_interface=/var/run/wpa_supplicant-$ifname
+$ap_scan
+network={
+	$modestr
+	scan_ssid=$scan_ssid
+	ssid="$ssid"
+	$bssid1
+	key_mgmt=$key_mgmt
+	$proto
+	$freq
+	${fixed:+"fixed_freq=1"}
+	$beacon_interval
+	$brates
+	$mrate
+	$ht_str
+	$ieee80211w
+	$passphrase
+	$pairwise
+	$group
+	$eap_type
+	$ca_cert
+	$client_cert
+	$priv_key
+	$priv_key_pwd
+	$phase2
+	$identity
+	$password
+	$wep_key0
+	$wep_key1
+	$wep_key2
+	$wep_key3
+	$wep_tx_keyidx
+}
+EOF
+	if [ -n "$proto" -o "$key_mgmt" == "NONE" ]; then
+		wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf $options
+	else
+		return 0
+	fi
+}
diff --git a/package/network/services/hostapd/files/wps-hotplug.sh b/package/network/services/hostapd/files/wps-hotplug.sh
new file mode 100644
index 0000000000..b5376cc55b
--- /dev/null
+++ b/package/network/services/hostapd/files/wps-hotplug.sh
@@ -0,0 +1,6 @@
+if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
+	for dir in /var/run/hostapd-*; do
+		[ -d "$dir" ] || continue
+		hostapd_cli -p "$dir" wps_pbc
+	done
+fi