[mac80211] Update to compat-wireless-2009-03-31

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15083 3c298f89-4303-0410-b956-a3cf2f4a3e73

18 files changed, 864 insertions, 1029 deletions

diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile
index ce24dcacb5..42f3e9a5ff 100644
--- a/package/mac80211/Makefile
+++ b/package/mac80211/Makefile
@@ -17,12 +17,12 @@ ifneq ($(CONFIG_LINUX_2_6_21)$(CONFIG_LINUX_2_6_23)$(CONFIG_LINUX_2_6_24)$(CONFI
   PKG_MD5SUM:=9563ceeed86bca0859ad5f010623277c
   PATCH_DIR:=./patches-old
 else
-  PKG_VERSION:=2009-03-24
+  PKG_VERSION:=2009-03-31
   PKG_RELEASE:=1
   PKG_SOURCE_URL:= \
 	http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/03 \
 	http://wireless.kernel.org/download/compat-wireless-2.6
-  PKG_MD5SUM:=9e0574d123b6d6827c56a7c0042173fb
+  PKG_MD5SUM:=b5b2159081c36dd6c318a28eddf7e646
 endif
 
 PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
diff --git a/package/mac80211/patches/007-remove_unused_stuff.patch b/package/mac80211/patches/007-remove_unused_stuff.patch
index 64be86468a..dc93a7f1d5 100644
--- a/package/mac80211/patches/007-remove_unused_stuff.patch
+++ b/package/mac80211/patches/007-remove_unused_stuff.patch
@@ -163,7 +163,7 @@
  
  # USB Drivers
  ifneq ($(CONFIG_USB),)
-@@ -249,22 +249,22 @@ CONFIG_ZD1211RW=m
+@@ -249,21 +249,21 @@ CONFIG_ZD1211RW=m
  # is only wireless RNDIS chip known to date.
  # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
  # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
@@ -182,19 +182,17 @@
 -CONFIG_AT76C50X_USB=m
 +# CONFIG_AT76C50X_USB=m
  
- # Activate AR9170 support only on kernel >= 2.6.28.
+ # Activate AR9170 support only on kernel >= 2.6.29.
  # The needed USB poison feature was added in this kernel release.
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 28 && echo yes),yes)
--CONFIG_AR9170_COMMON=m
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
 -CONFIG_AR9170_USB=m
 -CONFIG_AR9170_LEDS=y
-+# CONFIG_AR9170_COMMON=m
 +# CONFIG_AR9170_USB=m
 +# CONFIG_AR9170_LEDS=y
  endif
  
  # RT2500USB does not require firmware
-@@ -302,20 +302,20 @@ CONFIG_P54_COMMON=m
+@@ -301,20 +301,20 @@ CONFIG_P54_COMMON=m
  
  
  # Sonics Silicon Backplane
diff --git a/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch b/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch
index 91f5a2ad82..6ef7637b17 100644
--- a/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch
+++ b/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch
@@ -1,7 +1,7 @@
-From 313314263fda19db8eed94a7d7259b595634212e Mon Sep 17 00:00:00 2001
+From 9ed8a41a30916a79529552872e8d1a6175d37398 Mon Sep 17 00:00:00 2001
 From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 14 Mar 2009 20:02:51 +0100
-Subject: [PATCH] rt2x00: Move Move pci_dev specific access to rt2x00pci
+Date: Sat, 28 Mar 2009 20:30:14 +0100
+Subject: [PATCH 1/9] rt2x00: Move Move pci_dev specific access to rt2x00pci
 
 pci_dev->irq and pci_name(pci_dev) access should be limited
 to rt2x00pci only. This is more generic and allows a rt2x00 pci
@@ -16,7 +16,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
  drivers/net/wireless/rt2x00/rt2x00.h    |   18 ++++++++++++++++++
  drivers/net/wireless/rt2x00/rt2x00pci.c |   16 ++++++++++++----
  drivers/net/wireless/rt2x00/rt61pci.c   |    7 +------
- 5 files changed, 33 insertions(+), 12 deletions(-)
+ drivers/net/wireless/rt2x00/rt61pci.h   |    6 ------
+ 6 files changed, 33 insertions(+), 18 deletions(-)
 
 --- a/drivers/net/wireless/rt2x00/rt2400pci.c
 +++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -148,3 +149,18 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
  
  	if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
  	    !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
+--- a/drivers/net/wireless/rt2x00/rt61pci.h
++++ b/drivers/net/wireless/rt2x00/rt61pci.h
+@@ -63,12 +63,6 @@
+  */
+ 
+ /*
+- * PCI Configuration Header
+- */
+-#define PCI_CONFIG_HEADER_VENDOR	0x0000
+-#define PCI_CONFIG_HEADER_DEVICE	0x0002
+-
+-/*
+  * HOST_CMD_CSR: For HOST to interrupt embedded processor
+  */
+ #define HOST_CMD_CSR			0x0008
diff --git a/package/mac80211/patches/301-rt2x00-Fix-Sparse-warning.patch b/package/mac80211/patches/301-rt2x00-Fix-Sparse-warning.patch
new file mode 100644
index 0000000000..caac9a4090
--- /dev/null
+++ b/package/mac80211/patches/301-rt2x00-Fix-Sparse-warning.patch
@@ -0,0 +1,25 @@
+From 0a807e9fbd915d2c0cc30870403a571478a9191b Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 28 Mar 2009 20:31:25 +0100
+Subject: [PATCH 2/9] rt2x00: Fix Sparse warning
+
+rt2x00link_reset_qual() is not declared in a header,
+and is only internally used within rt2x00link.c.
+It should be declared as static.
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2x00link.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2x00link.c
++++ b/drivers/net/wireless/rt2x00/rt2x00link.c
+@@ -387,7 +387,7 @@ void rt2x00link_reset_tuner(struct rt2x0
+ 		rt2x00link_antenna_reset(rt2x00dev);
+ }
+ 
+-void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
++static void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
+ {
+ 	struct link_qual *qual = &rt2x00dev->link.qual;
+ 
diff --git a/package/mac80211/patches/302-rt2x00-Don-t-free-register-information-on-suspend.patch b/package/mac80211/patches/302-rt2x00-Don-t-free-register-information-on-suspend.patch
new file mode 100644
index 0000000000..11ad79d08c
--- /dev/null
+++ b/package/mac80211/patches/302-rt2x00-Don-t-free-register-information-on-suspend.patch
@@ -0,0 +1,95 @@
+From 76b0fa91af8ca33cd68f52f2d02a05c488777f58 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 28 Mar 2009 20:32:07 +0100
+Subject: [PATCH 3/9] rt2x00: Don't free register information on suspend
+
+After suspend & resume the rt2x00 devices won't wakeup
+anymore due to a broken register information setup.
+The most important problem is the release of the EEPROM
+buffer which is completely cleared and never read again
+after the suspend.
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2x00pci.c |   18 +-----------------
+ drivers/net/wireless/rt2x00/rt2x00usb.c |   18 +-----------------
+ 2 files changed, 2 insertions(+), 34 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
++++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
+@@ -377,8 +377,6 @@ int rt2x00pci_suspend(struct pci_dev *pc
+ 	if (retval)
+ 		return retval;
+ 
+-	rt2x00pci_free_reg(rt2x00dev);
+-
+ 	pci_save_state(pci_dev);
+ 	pci_disable_device(pci_dev);
+ 	return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
+@@ -389,7 +387,6 @@ int rt2x00pci_resume(struct pci_dev *pci
+ {
+ 	struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
+ 	struct rt2x00_dev *rt2x00dev = hw->priv;
+-	int retval;
+ 
+ 	if (pci_set_power_state(pci_dev, PCI_D0) ||
+ 	    pci_enable_device(pci_dev) ||
+@@ -398,20 +395,7 @@ int rt2x00pci_resume(struct pci_dev *pci
+ 		return -EIO;
+ 	}
+ 
+-	retval = rt2x00pci_alloc_reg(rt2x00dev);
+-	if (retval)
+-		return retval;
+-
+-	retval = rt2x00lib_resume(rt2x00dev);
+-	if (retval)
+-		goto exit_free_reg;
+-
+-	return 0;
+-
+-exit_free_reg:
+-	rt2x00pci_free_reg(rt2x00dev);
+-
+-	return retval;
++	return rt2x00lib_resume(rt2x00dev);
+ }
+ EXPORT_SYMBOL_GPL(rt2x00pci_resume);
+ #endif /* CONFIG_PM */
+--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
++++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
+@@ -702,8 +702,6 @@ int rt2x00usb_suspend(struct usb_interfa
+ 	if (retval)
+ 		return retval;
+ 
+-	rt2x00usb_free_reg(rt2x00dev);
+-
+ 	/*
+ 	 * Decrease usbdev refcount.
+ 	 */
+@@ -717,24 +715,10 @@ int rt2x00usb_resume(struct usb_interfac
+ {
+ 	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
+ 	struct rt2x00_dev *rt2x00dev = hw->priv;
+-	int retval;
+ 
+ 	usb_get_dev(interface_to_usbdev(usb_intf));
+ 
+-	retval = rt2x00usb_alloc_reg(rt2x00dev);
+-	if (retval)
+-		return retval;
+-
+-	retval = rt2x00lib_resume(rt2x00dev);
+-	if (retval)
+-		goto exit_free_reg;
+-
+-	return 0;
+-
+-exit_free_reg:
+-	rt2x00usb_free_reg(rt2x00dev);
+-
+-	return retval;
++	return rt2x00lib_resume(rt2x00dev);
+ }
+ EXPORT_SYMBOL_GPL(rt2x00usb_resume);
+ #endif /* CONFIG_PM */
diff --git a/package/mac80211/patches/303-rt2x00-Add-rt73usb-USB-IDs.patch b/package/mac80211/patches/303-rt2x00-Add-rt73usb-USB-IDs.patch
new file mode 100644
index 0000000000..7b66c6c258
--- /dev/null
+++ b/package/mac80211/patches/303-rt2x00-Add-rt73usb-USB-IDs.patch
@@ -0,0 +1,21 @@
+From b587a44d6cf038cac3ce194c49196f501fa4bb48 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 28 Mar 2009 20:32:50 +0100
+Subject: [PATCH 4/9] rt2x00: Add rt73usb USB IDs
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt73usb.c |    2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt73usb.c
++++ b/drivers/net/wireless/rt2x00/rt73usb.c
+@@ -2369,6 +2369,8 @@ static struct usb_device_id rt73usb_devi
+ 	/* Buffalo */
+ 	{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
+ 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
++	{ USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
++	{ USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
+ 	/* CNet */
+ 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
+ 	{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch b/package/mac80211/patches/304-rt2x00-Implement-support-for-802.11n.patch
index 6106789c3f..b1b75751bf 100644
--- a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
+++ b/package/mac80211/patches/304-rt2x00-Implement-support-for-802.11n.patch
@@ -1,7 +1,7 @@
-From 827327792c4b0d4d4909ec27bd56cb3ba8f2b754 Mon Sep 17 00:00:00 2001
+From 0f4396e5a4351ccd48256407b4a606d6c33a94cb Mon Sep 17 00:00:00 2001
 From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 14 Mar 2009 20:06:48 +0100
-Subject: [PATCH] rt2x00: Implement support for 802.11n
+Date: Sat, 28 Mar 2009 20:37:26 +0100
+Subject: [PATCH 5/9] rt2x00: Implement support for 802.11n
 
 Extend rt2x00lib capabilities to support 802.11n,
 it still lacks aggregation support, but that can
diff --git a/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
deleted file mode 100644
index 2bd4eb295b..0000000000
--- a/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 6bdf6a86854bdeab9557f0ce25c3f5401c18f629 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 14 Mar 2009 20:57:27 +0100
-Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt61pci.h |    6 ------
- 1 files changed, 0 insertions(+), 6 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt61pci.h
-+++ b/drivers/net/wireless/rt2x00/rt61pci.h
-@@ -63,12 +63,6 @@
-  */
- 
- /*
-- * PCI Configuration Header
-- */
--#define PCI_CONFIG_HEADER_VENDOR	0x0000
--#define PCI_CONFIG_HEADER_DEVICE	0x0002
--
--/*
-  * HOST_CMD_CSR: For HOST to interrupt embedded processor
-  */
- #define HOST_CMD_CSR			0x0008
diff --git a/package/mac80211/patches/305-rt2x00-Add-rt2x00soc-bus-module.patch b/package/mac80211/patches/305-rt2x00-Add-rt2x00soc-bus-module.patch
new file mode 100644
index 0000000000..b09b0d6392
--- /dev/null
+++ b/package/mac80211/patches/305-rt2x00-Add-rt2x00soc-bus-module.patch
@@ -0,0 +1,247 @@
+From 18b2be31a35dc8bd216e60e3c9d8d8e7b2179aed Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 28 Mar 2009 20:38:40 +0100
+Subject: [PATCH 6/9] rt2x00: Add rt2x00soc bus module
+
+Add new library module for SoC drivers.
+This is needed to fully support the platform
+driver part of rt2800pci.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/Kconfig     |    4 +
+ drivers/net/wireless/rt2x00/Makefile    |    1 +
+ drivers/net/wireless/rt2x00/rt2x00soc.c |  159 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2x00soc.h |   52 ++++++++++
+ 4 files changed, 216 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.c
+ create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.h
+
+--- a/drivers/net/wireless/rt2x00/Makefile
++++ b/drivers/net/wireless/rt2x00/Makefile
+@@ -12,6 +12,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_HT)	+= rt2
+ 
+ obj-$(CONFIG_RT2X00_LIB)		+= rt2x00lib.o
+ obj-$(CONFIG_RT2X00_LIB_PCI)		+= rt2x00pci.o
++obj-$(CONFIG_RT2X00_LIB_SOC)		+= rt2x00soc.o
+ obj-$(CONFIG_RT2X00_LIB_USB)		+= rt2x00usb.o
+ obj-$(CONFIG_RT2400PCI)			+= rt2400pci.o
+ obj-$(CONFIG_RT2500PCI)			+= rt2500pci.o
+--- /dev/null
++++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
+@@ -0,0 +1,159 @@
++/*
++	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
++	<http://rt2x00.serialmonkey.com>
++
++	This program is free software; you can redistribute it and/or modify
++	it under the terms of the GNU General Public License as published by
++	the Free Software Foundation; either version 2 of the License, or
++	(at your option) any later version.
++
++	This program is distributed in the hope that it will be useful,
++	but WITHOUT ANY WARRANTY; without even the implied warranty of
++	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++	GNU General Public License for more details.
++
++	You should have received a copy of the GNU General Public License
++	along with this program; if not, write to the
++	Free Software Foundation, Inc.,
++	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/*
++	Module: rt2x00soc
++	Abstract: rt2x00 generic soc device routines.
++ */
++
++#include <linux/bug.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include "rt2x00.h"
++#include "rt2x00soc.h"
++
++static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
++{
++	kfree(rt2x00dev->rf);
++	rt2x00dev->rf = NULL;
++
++	kfree(rt2x00dev->eeprom);
++	rt2x00dev->eeprom = NULL;
++}
++
++static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
++{
++	struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENODEV;
++
++	rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start);
++	if (!rt2x00dev->csr.base)
++		goto exit;
++
++	rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
++	if (!rt2x00dev->eeprom)
++		goto exit;
++
++	rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
++	if (!rt2x00dev->rf)
++		goto exit;
++
++	return 0;
++
++exit:
++	ERROR_PROBE("Failed to allocate registers.\n");
++	rt2x00soc_free_reg(rt2x00dev);
++
++	return -ENOMEM;
++}
++
++int rt2x00soc_probe(struct platform_device *pdev,
++		    const unsigned short chipset,
++		    const struct rt2x00_ops *ops)
++{
++	struct ieee80211_hw *hw;
++	struct rt2x00_dev *rt2x00dev;
++	int retval;
++
++	hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
++	if (!hw) {
++		ERROR_PROBE("Failed to allocate hardware.\n");
++		return -ENOMEM;
++	}
++
++	platform_set_drvdata(pdev, hw);
++
++	rt2x00dev = hw->priv;
++	rt2x00dev->dev = &pdev->dev;
++	rt2x00dev->ops = ops;
++	rt2x00dev->hw = hw;
++	rt2x00dev->irq = platform_get_irq(pdev, 0);
++	rt2x00dev->name = pdev->dev.driver->name;
++
++	rt2x00_set_chip_rt(rt2x00dev, chipset);
++
++	retval = rt2x00soc_alloc_reg(rt2x00dev);
++	if (retval)
++		goto exit_free_device;
++
++	retval = rt2x00lib_probe_dev(rt2x00dev);
++	if (retval)
++		goto exit_free_reg;
++
++	return 0;
++
++exit_free_reg:
++	rt2x00soc_free_reg(rt2x00dev);
++
++exit_free_device:
++	ieee80211_free_hw(hw);
++
++	return retval;
++}
++
++int rt2x00soc_remove(struct platform_device *pdev)
++{
++	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
++	struct rt2x00_dev *rt2x00dev = hw->priv;
++
++	/*
++	 * Free all allocated data.
++	 */
++	rt2x00lib_remove_dev(rt2x00dev);
++	rt2x00soc_free_reg(rt2x00dev);
++	ieee80211_free_hw(hw);
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(rt2x00soc_remove);
++
++#ifdef CONFIG_PM
++int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
++	struct rt2x00_dev *rt2x00dev = hw->priv;
++
++	return rt2x00lib_suspend(rt2x00dev, state);
++}
++EXPORT_SYMBOL_GPL(rt2x00soc_suspend);
++
++int rt2x00soc_resume(struct platform_device *pdev)
++{
++	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
++	struct rt2x00_dev *rt2x00dev = hw->priv;
++
++	return rt2x00lib_resume(rt2x00dev);
++}
++EXPORT_SYMBOL_GPL(rt2x00soc_resume);
++#endif /* CONFIG_PM */
++
++/*
++ * rt2x00soc module information.
++ */
++MODULE_AUTHOR(DRV_PROJECT);
++MODULE_VERSION(DRV_VERSION);
++MODULE_DESCRIPTION("rt2x00 soc library");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
+@@ -0,0 +1,52 @@
++/*
++	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
++	<http://rt2x00.serialmonkey.com>
++
++	This program is free software; you can redistribute it and/or modify
++	it under the terms of the GNU General Public License as published by
++	the Free Software Foundation; either version 2 of the License, or
++	(at your option) any later version.
++
++	This program is distributed in the hope that it will be useful,
++	but WITHOUT ANY WARRANTY; without even the implied warranty of
++	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++	GNU General Public License for more details.
++
++	You should have received a copy of the GNU General Public License
++	along with this program; if not, write to the
++	Free Software Foundation, Inc.,
++	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/*
++	Module: rt2x00soc
++	Abstract: Data structures for the rt2x00soc module.
++ */
++
++#ifndef RT2X00SOC_H
++#define RT2X00SOC_H
++
++#define KSEG1ADDR(__ptr) __ptr
++
++#define __rt2x00soc_probe(__chipset, __ops) \
++static int __rt2x00soc_probe(struct platform_device *pdev) \
++{ \
++	return rt2x00soc_probe(pdev, (__chipset), (__ops)); \
++}
++
++/*
++ * SoC driver handlers.
++ */
++int rt2x00soc_probe(struct platform_device *pdev,
++		    const unsigned short chipset,
++		    const struct rt2x00_ops *ops);
++int rt2x00soc_remove(struct platform_device *pdev);
++#ifdef CONFIG_PM
++int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state);
++int rt2x00soc_resume(struct platform_device *pdev);
++#else
++#define rt2x00soc_suspend	NULL
++#define rt2x00soc_resume	NULL
++#endif /* CONFIG_PM */
++
++#endif /* RT2X00SOC_H */
diff --git a/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
deleted file mode 100644
index 783a6d609e..0000000000
--- a/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From a3334c89fbed644bb12ee27e2d9c1dc70b1512ab Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 14 Mar 2009 20:58:12 +0100
-Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2 (rt2800pci)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.h |    6 ------
- 1 files changed, 0 insertions(+), 6 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.h
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
-@@ -83,12 +83,6 @@
-  */
- 
- /*
-- * PCI Configuration Header
-- */
--#define PCI_CONFIG_HEADER_VENDOR	0x0000
--#define PCI_CONFIG_HEADER_DEVICE	0x0002
--
--/*
-  * E2PROM_CSR: EEPROM control register.
-  * RELOAD: Write 1 to reload eeprom content.
-  * TYPE: 0: 93c46, 1:93c66.
diff --git a/package/mac80211/patches/306-rt2x00-Add-calibration-fields-to-rt2x00dev-rt2x00h.patch b/package/mac80211/patches/306-rt2x00-Add-calibration-fields-to-rt2x00dev-rt2x00h.patch
new file mode 100644
index 0000000000..533c96c9c6
--- /dev/null
+++ b/package/mac80211/patches/306-rt2x00-Add-calibration-fields-to-rt2x00dev-rt2x00h.patch
@@ -0,0 +1,25 @@
+From 7f759a5e56f64fed24e5eb487003ce455786bc31 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 28 Mar 2009 20:44:18 +0100
+Subject: [PATCH 7/9] rt2x00: Add calibration fields to rt2x00dev (rt2x00ht)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2x00.h |    6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -782,6 +782,12 @@ struct rt2x00_dev {
+ 	u8 freq_offset;
+ 
+ 	/*
++	 * Calibration information (for rt2800usb).
++	 */
++	u8 calibration_bw20;
++	u8 calibration_bw40;
++
++	/*
+ 	 * Low level statistics which will have
+ 	 * to be kept up to date while device is running.
+ 	 */
diff --git a/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch b/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch
deleted file mode 100644
index 4f832939c9..0000000000
--- a/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 14f870b27b836acee5f04809287175016ca16b05 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sun, 15 Mar 2009 15:13:58 +0100
-Subject: [PATCH] rt2x00: Fix module loading in case of error (rt2800pci)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c |    9 +++++++++
- 1 files changed, 9 insertions(+), 0 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -3014,10 +3014,19 @@ static int __init rt2800pci_init(void)
- 
- #ifdef CONFIG_RT2800PCI_WISOC
- 	ret = platform_driver_register(&rt2800soc_driver);
-+	if (ret)
-+		return ret;
- #endif
- #ifdef CONFIG_RT2800PCI_PCI
- 	ret = pci_register_driver(&rt2800pci_driver);
-+	if (ret) {
-+#ifdef CONFIG_RT2800PCI_WISOC
-+		platform_driver_unregister(&rt2800soc_driver);
-+#endif
-+		return ret;
-+	}
- #endif
-+
- 	return ret;
- }
- 
diff --git a/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch b/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch
deleted file mode 100644
index d08e5fecfd..0000000000
--- a/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From aef81259a944186a120d51e4462a5f974de99fb8 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sun, 15 Mar 2009 15:37:29 +0100
-Subject: [PATCH] rt2x00: Add PM support for SoC (rt2800pci)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c |   52 +++++++++++++++++++++++++++++--
- 1 files changed, 49 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -2934,7 +2934,7 @@ exit:
- 
- static int rt2800soc_probe(struct platform_device *pdev)
- {
--	const struct rt2x00_ops *ops = &rt2800pci_ops;
-+	struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p;
- 	struct ieee80211_hw *hw;
- 	struct rt2x00_dev *rt2x00dev;
- 	int retval;
-@@ -2990,10 +2990,56 @@ static int rt2800soc_remove(struct platf
- 	return 0;
- }
- 
-+#ifdef CONFIG_PM
-+int rt2x00soc_suspend(struct device *dev, pm_message_t state)
-+{
-+	struct ieee80211_hw *hw = dev_get_drvdata(dev);
-+	struct rt2x00_dev *rt2x00dev = hw->priv;
-+	int retval;
-+
-+	retval = rt2x00lib_suspend(rt2x00dev, state);
-+	if (retval)
-+		return retval;
-+
-+	rt2800soc_free_reg(rt2x00dev);
-+
-+	return 0;
-+}
-+
-+int rt2x00soc_resume(struct device *dev)
-+{
-+	struct ieee80211_hw *hw = dev_get_drvdata(dev);
-+	struct rt2x00_dev *rt2x00dev = hw->priv;
-+	int retval;
-+
-+	retval = rt2x00soc_alloc_reg(rt2x00dev);
-+	if (retval)
-+		return retval;
-+
-+	retval = rt2x00lib_resume(rt2x00dev);
-+	if (retval)
-+		goto exit_free_reg;
-+
-+	return 0;
-+
-+exit_free_reg:
-+	rt2x00pci_free_reg(rt2x00dev);
-+
-+	return retval;
-+}
-+#endif /* CONFIG_PM */
-+
- static struct platform_driver rt2800soc_driver = {
--	.driver.name	= "rt2800_wmac",
-+	.driver		= {
-+		.name		= "rt2800_wmac",
-+		.owner		= THIS_MODULE,
-+		.mod_name	= KBUILD_MODNAME,
-+		.p		= &rt2800pci_ops;
-+	}
- 	.probe		= rt2800soc_probe,
--	.remove		= rt2800soc_remove,
-+	.remove		= __devexit_p(rt2800soc_remove),
-+	.suspend	= rt2x00soc_suspend,
-+	.resume		= rt2x00soc_resume,
- };
- #endif /* CONFIG_RT2800PCI_WISOC */
- 
diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/307-rt2x00-Implement-support-for-rt2800pci.patch
index 9cd2289e06..6b66d85236 100644
--- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
+++ b/package/mac80211/patches/307-rt2x00-Implement-support-for-rt2800pci.patch
@@ -1,7 +1,7 @@
-From a34c288f7214637f214ec17fb2b35dd5d20b0634 Mon Sep 17 00:00:00 2001
+From b7dcb460c4c441ce52b3c5ce30d65e1ecfbb30ad Mon Sep 17 00:00:00 2001
 From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 14 Mar 2009 20:41:58 +0100
-Subject: [PATCH] rt2x00: Implement support for rt2800pci
+Date: Sat, 28 Mar 2009 20:46:46 +0100
+Subject: [PATCH 8/9] rt2x00: Implement support for rt2800pci
 
 Add support for the rt2800pci chipset.
 
@@ -13,18 +13,18 @@ Signed-off-by: Mark Asselstine <asselsm@gmail.com>
 Signed-off-by: Felix Fietkau <nbd@openwrt.org>
 Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 ---
- drivers/net/wireless/rt2x00/Kconfig     |   15 +
+ drivers/net/wireless/rt2x00/Kconfig     |   26 +
  drivers/net/wireless/rt2x00/Makefile    |    1 +
- drivers/net/wireless/rt2x00/rt2800pci.c | 3035 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800pci.h | 1880 +++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800pci.c | 3244 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800pci.h | 1927 ++++++++++++++++++
  drivers/net/wireless/rt2x00/rt2x00.h    |    6 +
- 5 files changed, 4937 insertions(+), 0 deletions(-)
+ 5 files changed, 5204 insertions(+), 0 deletions(-)
  create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c
  create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h
 
 --- a/drivers/net/wireless/rt2x00/Makefile
 +++ b/drivers/net/wireless/rt2x00/Makefile
-@@ -16,5 +16,6 @@ obj-$(CONFIG_RT2X00_LIB_USB)		+= rt2x00u
+@@ -17,5 +17,6 @@ obj-$(CONFIG_RT2X00_LIB_USB)		+= rt2x00u
  obj-$(CONFIG_RT2400PCI)			+= rt2400pci.o
  obj-$(CONFIG_RT2500PCI)			+= rt2500pci.o
  obj-$(CONFIG_RT61PCI)			+= rt61pci.o
@@ -33,7 +33,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
  obj-$(CONFIG_RT73USB)			+= rt73usb.o
 --- /dev/null
 +++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -0,0 +1,3035 @@
+@@ -0,0 +1,3244 @@
 +/*
 +	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
 +	<http://rt2x00.serialmonkey.com>
@@ -72,13 +72,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +
 +#include "rt2x00.h"
 +#include "rt2x00pci.h"
++#include "rt2x00soc.h"
 +#include "rt2800pci.h"
 +
-+/* FIXME: Make Kconfig dependent */
-+#ifdef CONFIG_PCI
++#ifdef CONFIG_RT2800PCI_PCI_MODULE
 +#define CONFIG_RT2800PCI_PCI
 +#endif
-+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
++
++#ifdef CONFIG_RT2800PCI_WISOC_MODULE
 +#define CONFIG_RT2800PCI_WISOC
 +#endif
 +
@@ -102,6 +103,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 + */
 +#define WAIT_FOR_BBP(__dev, __reg) \
 +	rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RFCSR(__dev, __reg) \
++	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
 +#define WAIT_FOR_RF(__dev, __reg) \
 +	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
 +#define WAIT_FOR_MCU(__dev, __reg) \
@@ -165,6 +168,61 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	mutex_unlock(&rt2x00dev->csr_mutex);
 +}
 +
++static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
++				  const unsigned int word, const u8 value)
++{
++	u32 reg;
++
++	mutex_lock(&rt2x00dev->csr_mutex);
++
++	/*
++	 * Wait until the RFCSR becomes available, afterwards we
++	 * can safely write the new data into the register.
++	 */
++	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++		reg = 0;
++		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
++	}
++
++	mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
++				 const unsigned int word, u8 *value)
++{
++	u32 reg;
++
++	mutex_lock(&rt2x00dev->csr_mutex);
++
++	/*
++	 * Wait until the RFCSR becomes available, afterwards we
++	 * can safely write the read request into the register.
++	 * After the data has been written, we wait until hardware
++	 * returns the correct value, if at any time the register
++	 * doesn't become available in time, reg will be 0xffffffff
++	 * which means we return 0xff to the caller.
++	 */
++	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++		reg = 0;
++		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
++
++		WAIT_FOR_RFCSR(rt2x00dev, &reg);
++	}
++
++	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
++
++	mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
 +static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
 +			       const unsigned int word, const u32 value)
 +{
@@ -196,6 +254,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +{
 +	u32 reg;
 +
++	/*
++	 * RT2880 and RT3052 don't support MCU requests.
++	 */
++	if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
++	    rt2x00_rt(&rt2x00dev->chip, RT3052))
++		return;
++
 +	mutex_lock(&rt2x00dev->csr_mutex);
 +
 +	/*
@@ -765,13 +830,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	rt2x00dev->lna_gain = lna_gain;
 +}
 +
-+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
-+				     struct ieee80211_conf *conf,
-+				     struct rf_channel *rf,
-+				     struct channel_info *info)
++static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
++					  struct ieee80211_conf *conf,
++					  struct rf_channel *rf,
++					  struct channel_info *info)
 +{
-+	u32 reg;
-+	unsigned int tx_pin;
 +	u16 eeprom;
 +
 +	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
@@ -781,9 +844,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	 */
 +	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
 +
-+	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
++	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
 +		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-+	}
 +
 +	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
 +		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
@@ -842,6 +904,62 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
 +	rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 +	rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
++}
++
++static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
++					  struct ieee80211_conf *conf,
++					  struct rf_channel *rf,
++					  struct channel_info *info)
++{
++	u8 rfcsr;
++
++	rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
++	rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
++
++	rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
++	rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
++
++	rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
++			  TXPOWER_G_TO_DEV(info->tx_power1));
++	rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
++
++	rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
++	rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
++
++	if (conf_is_ht40(conf))
++		rt2800pci_rfcsr_write(rt2x00dev, 24,
++				      rt2x00dev->calibration_bw40);
++	else
++		rt2800pci_rfcsr_write(rt2x00dev, 24,
++				      rt2x00dev->calibration_bw20);
++
++	rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
++	rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
++}
++
++static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
++				     struct ieee80211_conf *conf,
++				     struct rf_channel *rf,
++				     struct channel_info *info)
++{
++	u32 reg;
++	unsigned int tx_pin;
++	u16 eeprom;
++	u8 bbp;
++
++	/*
++	 * Determine antenna settings from EEPROM
++	 */
++	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
++
++	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++		rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
++	else
++		rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
 +
 +	/*
 +	 * Change BBP settings
@@ -897,6 +1015,26 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +
 +	rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
 +
++	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
++	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++	rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
++	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
++	rt2800pci_bbp_write(rt2x00dev, 3, bbp);
++
++	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
++		if (conf_is_ht40(conf)) {
++			rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
++			rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
++			rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
++		} else {
++			rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
++			rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
++			rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
++		}
++	}
++
 +	msleep(1);
 +}
 +
@@ -1301,7 +1439,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	entry_priv = rt2x00dev->rx->entries[0].priv_data;
 +	rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
 +	rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
-+	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0);
++	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
 +	rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
 +
 +	/*
@@ -1659,6 +1797,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
 +		rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
 +
++	if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
++		rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
++		rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
++		rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
++	}
++
 +	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
 +		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
 +
@@ -1672,6 +1816,144 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	return 0;
 +}
 +
++static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
++				   bool bw40, u8 rfcsr24, u8 filter_target)
++{
++	unsigned int i;
++	u8 bbp;
++	u8 rfcsr;
++	u8 passband;
++	u8 stopband;
++	u8 overtuned = 0;
++
++	rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++
++	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
++	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
++	rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++	/*
++	 * Set power & frequency of passband test tone
++	 */
++	rt2800pci_bbp_write(rt2x00dev, 24, 0);
++
++	for (i = 0; i < 100; i++) {
++		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
++		msleep(1);
++
++		rt2800pci_bbp_read(rt2x00dev, 55, &passband);
++		if (passband)
++			break;
++	}
++
++	/*
++	 * Set power & frequency of stopband test tone
++	 */
++	rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
++
++	for (i = 0; i < 100; i++) {
++		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
++		msleep(1);
++
++		rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
++
++		if ((passband - stopband) <= filter_target) {
++			rfcsr24++;
++			overtuned += ((passband - stopband) == filter_target);
++		} else
++			break;
++
++		rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++	}
++
++	rfcsr24 -= !!overtuned;
++
++	rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++	return rfcsr24;
++}
++
++static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
++{
++	u8 rfcsr;
++	u8 bbp;
++	
++	if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++	    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
++	    !rt2x00_rf(&rt2x00dev->chip, RF3022))
++		return 0;
++
++	/*
++	 * Init RF calibration.
++	 */
++	rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
++	rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
++	msleep(1);
++	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
++	rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
++
++	rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
++	rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
++	rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
++	rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
++	rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
++	rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
++	rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
++	rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
++	rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
++	rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
++	rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
++	rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
++	rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
++	rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
++	rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
++	rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
++	rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
++	rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
++	rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
++	rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
++	rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
++	rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
++	rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
++	rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
++	rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
++	rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
++	rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
++	rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
++	rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
++	rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
++
++	/*
++	 * Set RX Filter calibration for 20MHz and 40MHz
++	 */
++	rt2x00dev->calibration_bw20 =
++	    rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
++	rt2x00dev->calibration_bw40 =
++	    rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
++
++	/*
++	 * Set back to initial state
++	 */
++	rt2800pci_bbp_write(rt2x00dev, 24, 0);
++
++	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
++	rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++	/*
++	 * set BBP back to BW20
++	 */
++	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
++	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++	return 0;
++}
++
 +/*
 + * Device state switch handlers.
 + */
@@ -1754,7 +2036,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +		     rt2800pci_init_queues(rt2x00dev) ||
 +		     rt2800pci_init_registers(rt2x00dev) ||
 +		     rt2800pci_wait_wpdma_ready(rt2x00dev) ||
-+		     rt2800pci_init_bbp(rt2x00dev)))
++		     rt2800pci_init_bbp(rt2x00dev) ||
++		     rt2800pci_init_rfcsr(rt2x00dev)))
 +		return -EIO;
 +
 +	/*
@@ -2150,6 +2433,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
 +
 +	/*
++	 * Set RX IDX in register to inform hardware that we have handled
++	 * this entry and it is available for reuse again.
++	 */
++	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
++
++	/*
 +	 * Remove TXWI descriptor from start of buffer.
 +	 */
 +	skb_pull(entry->skb, RXWI_DESC_SIZE);
@@ -2416,7 +2705,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
 +	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
 +	    !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
-+	    !rt2x00_rf(&rt2x00dev->chip, RF3052)) {
++	    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
++	    !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
 +		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 +		return -ENODEV;
 +	}
@@ -2496,8 +2786,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	/* 802.11 HyperLan 2 */
 +	{ 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
 +	{ 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
-+	{ 104, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed1a3 },
-+	{ 108, 0x18402ecc, 0x184c0a32, 0x18578a55, 0x180ed193 },
++	{ 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
++	{ 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
 +	{ 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
 +	{ 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
 +	{ 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
@@ -2564,7 +2854,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +
 +	if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
 +	    rt2x00_rf(&rt2x00dev->chip, RF2720) ||
-+	    rt2x00_rf(&rt2x00dev->chip, RF3052)) {
++	    rt2x00_rf(&rt2x00dev->chip, RF3021) ||
++	    rt2x00_rf(&rt2x00dev->chip, RF3022)) {
 +		spec->num_channels = 14;
 +		spec->channels = rf_vals;
 +	} else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
@@ -2660,7 +2951,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	/*
 +	 * This device requires firmware.
 +	 */
-+	__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
++	if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
++	    !rt2x00_rt(&rt2x00dev->chip, RT3052))
++		__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
 +	if (!modparam_nohwcrypt)
 +		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 +
@@ -2898,7 +3191,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +/*
 + * RT2800pci module information.
 + */
-+#ifdef CONFIG_RT2800PCI_PCI
 +static struct pci_device_id rt2800pci_device_table[] = {
 +	{ PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
 +	{ PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
@@ -2910,126 +3202,34 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	{ PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
 +	{ 0, }
 +};
-+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
-+#endif /* CONFIG_RT2800PCI_PCI */
 +
 +MODULE_AUTHOR(DRV_PROJECT);
 +MODULE_VERSION(DRV_VERSION);
 +MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
 +MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
++#ifdef CONFIG_RT2800PCI_PCI
 +MODULE_FIRMWARE(FIRMWARE_RT2860);
++MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
++#endif /* CONFIG_RT2800PCI_PCI */
 +MODULE_LICENSE("GPL");
 +
 +#ifdef CONFIG_RT2800PCI_WISOC
-+
-+#ifdef CONFIG_RALINK_RT288X
-+#define WSOC_RT_CHIPSET		RT2880
-+#endif /* CONFIG_RALINK_RT288X */
-+
-+#ifdef CONFIG_RALINK_RT305X
-+#define WSOC_RT_CHIPSET		RT3052
-+#endif /* CONFIG_RALINK_RT305X */
-+
-+static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev)
-+{
-+	kfree(rt2x00dev->rf);
-+	rt2x00dev->rf = NULL;
-+
-+	kfree(rt2x00dev->eeprom);
-+	rt2x00dev->eeprom = NULL;
-+}
-+
-+static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
-+{
-+	struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
-+	struct resource *res;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		ERROR_PROBE("Failed to get MMIO resource\n");
-+		return -ENODEV;
-+	}
-+
-+	rt2x00dev->csr.base = (void __iomem *) KSEG1ADDR(res->start);
-+	rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
-+	if (!rt2x00dev->eeprom)
-+		goto exit;
-+
-+	rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
-+	if (!rt2x00dev->rf)
-+		goto exit;
-+
-+	return 0;
-+
-+exit:
-+	ERROR_PROBE("Failed to allocate registers.\n");
-+	rt2800soc_free_reg(rt2x00dev);
-+
-+	return -ENOMEM;
-+}
-+
-+static int rt2800soc_probe(struct platform_device *pdev)
-+{
-+	const struct rt2x00_ops *ops = &rt2800pci_ops;
-+	struct ieee80211_hw *hw;
-+	struct rt2x00_dev *rt2x00dev;
-+	int retval;
-+
-+	hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
-+	if (!hw) {
-+		ERROR_PROBE("Failed to allocate hardware.\n");
-+		return -ENOMEM;
-+	}
-+
-+	platform_set_drvdata(pdev, hw);
-+
-+	rt2x00dev = hw->priv;
-+	rt2x00dev->dev = &pdev->dev;
-+	rt2x00dev->ops = ops;
-+	rt2x00dev->hw = hw;
-+	rt2x00dev->irq = platform_get_irq(pdev, 0);
-+	rt2x00dev->name = pdev->dev.driver->name;
-+
-+	rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET);
-+
-+	retval = rt2800soc_alloc_reg(rt2x00dev);
-+	if (retval)
-+		goto exit_free_device;
-+
-+	retval = rt2x00lib_probe_dev(rt2x00dev);
-+	if (retval)
-+		goto exit_free_reg;
-+
-+	return 0;
-+
-+exit_free_reg:
-+	rt2800soc_free_reg(rt2x00dev);
-+
-+exit_free_device:
-+	ieee80211_free_hw(hw);
-+
-+	return retval;
-+}
-+
-+static int rt2800soc_remove(struct platform_device *pdev)
-+{
-+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
-+	struct rt2x00_dev *rt2x00dev = hw->priv;
-+
-+	/*
-+	 * Free all allocated data.
-+	 */
-+	rt2x00lib_remove_dev(rt2x00dev);
-+	rt2800soc_free_reg(rt2x00dev);
-+	ieee80211_free_hw(hw);
-+
-+	return 0;
-+}
++#if defined(CONFIG_RALINK_RT288X)
++__rt2x00soc_probe(RT2880, &rt2800pci_ops);
++#elif defined(CONFIG_RALINK_RT305X)
++__rt2x00soc_probe(RT3052, &rt2800pci_ops);
++#endif
 +
 +static struct platform_driver rt2800soc_driver = {
-+	.driver.name	= "rt2800_wmac",
-+	.probe		= rt2800soc_probe,
-+	.remove		= rt2800soc_remove,
++	.driver		= {
++		.name		= "rt2800_wmac",
++		.owner		= THIS_MODULE,
++		.mod_name	= KBUILD_MODNAME,
++	},
++	.probe		= __rt2x00soc_probe,
++	.remove		= __devexit_p(rt2x00soc_remove),
++	.suspend	= rt2x00soc_suspend,
++	.resume		= rt2x00soc_resume,
 +};
 +#endif /* CONFIG_RT2800PCI_WISOC */
 +
@@ -3050,10 +3250,19 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +
 +#ifdef CONFIG_RT2800PCI_WISOC
 +	ret = platform_driver_register(&rt2800soc_driver);
++	if (ret)
++		return ret;
 +#endif
 +#ifdef CONFIG_RT2800PCI_PCI
 +	ret = pci_register_driver(&rt2800pci_driver);
++	if (ret) {
++#ifdef CONFIG_RT2800PCI_WISOC
++		platform_driver_unregister(&rt2800soc_driver);
++#endif
++		return ret;
++	}
 +#endif
++
 +	return ret;
 +}
 +
@@ -3071,7 +3280,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +module_exit(rt2800pci_exit);
 --- /dev/null
 +++ b/drivers/net/wireless/rt2x00/rt2800pci.h
-@@ -0,0 +1,1880 @@
+@@ -0,0 +1,1927 @@
 +/*
 +	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
 +	<http://rt2x00.serialmonkey.com>
@@ -3110,7 +3319,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 + * RF2750 2.4G/5G 1T2R
 + * RF3020 2.4G 1T1R
 + * RF2020 2.4G B/G
-+ * RF3052 2.4G 2T2R
++ * RF3021 2.4G 1T2R
++ * RF3022 2.4G 2T2R
 + */
 +#define RF2820				0x0001
 +#define RF2850				0x0002
@@ -3118,7 +3328,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +#define RF2750				0x0004
 +#define RF3020				0x0005
 +#define RF2020				0x0006
-+#define RF3052				0x0008
++#define RF3021				0x0007
++#define RF3022				0x0008
 +
 +/*
 + * RT2860 version
@@ -3157,12 +3368,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 + */
 +
 +/*
-+ * PCI Configuration Header
-+ */
-+#define PCI_CONFIG_HEADER_VENDOR	0x0000
-+#define PCI_CONFIG_HEADER_DEVICE	0x0002
-+
-+/*
 + * E2PROM_CSR: EEPROM control register.
 + * RELOAD: Write 1 to reload eeprom content.
 + * TYPE: 0: 93c46, 1:93c66.
@@ -3453,6 +3658,15 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +#define PBF_DBG				0x043c
 +
 +/*
++ * RF registers
++ */
++#define	RF_CSR_CFG			0x0500
++#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
++#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
++#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
++#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
++
++/*
 + * MAC Control/Status Registers(CSR).
 + * Some values are set in TU, whereas 1 TU == 1024 us.
 + */
@@ -4545,6 +4759,48 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 + * BBP 3: RX Antenna
 + */
 +#define BBP3_RX_ANTENNA			FIELD8(0x18)
++#define BBP3_HT40_PLUS			FIELD8(0x20)
++
++/*
++ * BBP 4: Bandwidth
++ */
++#define BBP4_TX_BF			FIELD8(0x01)
++#define BBP4_BANDWIDTH			FIELD8(0x18)
++
++/*
++ * RFCSR registers
++ * The wordsize of the RFCSR is 8 bits.
++ */
++
++/*
++ * RFCSR 6:
++ */
++#define RFCSR6_R			FIELD8(0x03)
++
++/*
++ * RFCSR 7:
++ */
++#define RFCSR7_RF_TUNING		FIELD8(0x01)
++
++/*
++ * RFCSR 12:
++ */
++#define RFCSR12_TX_POWER		FIELD8(0x1f)
++
++/*
++ * RFCSR 22:
++ */
++#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
++
++/*
++ * RFCSR 23:
++ */
++#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
++
++/*
++ * RFCSR 30:
++ */
++#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
 +
 +/*
 + * RF registers
diff --git a/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch b/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch
deleted file mode 100644
index 3bb5c2e0fb..0000000000
--- a/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch
+++ /dev/null
@@ -1,535 +0,0 @@
-From bfa282e0f525b074ec9a21372ab906156ce0aa20 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Mon, 16 Mar 2009 20:16:59 +0100
-Subject: [PATCH] rt2x00: DMA fixes & new chipset support (rt2800pci)
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c |  320 +++++++++++++++++++++++++++++--
- drivers/net/wireless/rt2x00/rt2800pci.h |   57 ++++++-
- 2 files changed, 361 insertions(+), 16 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -66,6 +66,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har
-  */
- #define WAIT_FOR_BBP(__dev, __reg) \
- 	rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
-+#define WAIT_FOR_RFCSR(__dev, __reg) \
-+	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
- #define WAIT_FOR_RF(__dev, __reg) \
- 	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
- #define WAIT_FOR_MCU(__dev, __reg) \
-@@ -129,6 +131,61 @@ static void rt2800pci_bbp_read(struct rt
- 	mutex_unlock(&rt2x00dev->csr_mutex);
- }
- 
-+static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
-+				  const unsigned int word, const u8 value)
-+{
-+	u32 reg;
-+
-+	mutex_lock(&rt2x00dev->csr_mutex);
-+
-+	/*
-+	 * Wait until the RFCSR becomes available, afterwards we
-+	 * can safely write the new data into the register.
-+	 */
-+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
-+		reg = 0;
-+		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
-+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
-+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
-+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
-+
-+		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
-+	}
-+
-+	mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
-+				 const unsigned int word, u8 *value)
-+{
-+	u32 reg;
-+
-+	mutex_lock(&rt2x00dev->csr_mutex);
-+
-+	/*
-+	 * Wait until the RFCSR becomes available, afterwards we
-+	 * can safely write the read request into the register.
-+	 * After the data has been written, we wait until hardware
-+	 * returns the correct value, if at any time the register
-+	 * doesn't become available in time, reg will be 0xffffffff
-+	 * which means we return 0xff to the caller.
-+	 */
-+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
-+		reg = 0;
-+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
-+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
-+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
-+
-+		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
-+
-+		WAIT_FOR_RFCSR(rt2x00dev, &reg);
-+	}
-+
-+	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-+
-+	mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
- static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
- 			       const unsigned int word, const u32 value)
- {
-@@ -160,6 +217,13 @@ static void rt2800pci_mcu_request(struct
- {
- 	u32 reg;
- 
-+	/*
-+	 * RT2880 and RT3052 don't support MCU requests.
-+	 */
-+	if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
-+	    rt2x00_rt(&rt2x00dev->chip, RT3052))
-+		return;
-+
- 	mutex_lock(&rt2x00dev->csr_mutex);
- 
- 	/*
-@@ -729,13 +793,11 @@ static void rt2800pci_config_lna_gain(st
- 	rt2x00dev->lna_gain = lna_gain;
- }
- 
--static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
--				     struct ieee80211_conf *conf,
--				     struct rf_channel *rf,
--				     struct channel_info *info)
-+static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
-+					  struct ieee80211_conf *conf,
-+					  struct rf_channel *rf,
-+					  struct channel_info *info)
- {
--	u32 reg;
--	unsigned int tx_pin;
- 	u16 eeprom;
- 
- 	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-@@ -745,9 +807,8 @@ static void rt2800pci_config_channel(str
- 	 */
- 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
- 
--	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
-+	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
- 		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
--	}
- 
- 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
- 		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
-@@ -806,6 +867,62 @@ static void rt2800pci_config_channel(str
- 	rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
- 	rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
- 	rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-+}
-+
-+static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
-+					  struct ieee80211_conf *conf,
-+					  struct rf_channel *rf,
-+					  struct channel_info *info)
-+{
-+	u8 rfcsr;
-+
-+	rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
-+	rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
-+
-+	rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
-+	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
-+	rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
-+
-+	rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
-+	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-+			  TXPOWER_G_TO_DEV(info->tx_power1));
-+	rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
-+
-+	rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
-+	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
-+	rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
-+
-+	if (conf_is_ht40(conf))
-+		rt2800pci_rfcsr_write(rt2x00dev, 24,
-+				      rt2x00dev->calibration_bw40);
-+	else
-+		rt2800pci_rfcsr_write(rt2x00dev, 24,
-+				      rt2x00dev->calibration_bw20);
-+
-+	rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
-+	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
-+	rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
-+}
-+
-+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
-+				     struct ieee80211_conf *conf,
-+				     struct rf_channel *rf,
-+				     struct channel_info *info)
-+{
-+	u32 reg;
-+	unsigned int tx_pin;
-+	u16 eeprom;
-+	u8 bbp;
-+
-+	/*
-+	 * Determine antenna settings from EEPROM
-+	 */
-+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-+		rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
-+	else
-+		rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
- 
- 	/*
- 	 * Change BBP settings
-@@ -861,6 +978,26 @@ static void rt2800pci_config_channel(str
- 
- 	rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
- 
-+	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-+	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-+
-+	rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
-+	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-+	rt2800pci_bbp_write(rt2x00dev, 3, bbp);
-+
-+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-+		if (conf_is_ht40(conf)) {
-+			rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
-+			rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
-+			rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
-+		} else {
-+			rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-+			rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
-+			rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
-+		}
-+	}
-+
- 	msleep(1);
- }
- 
-@@ -1265,7 +1402,7 @@ static int rt2800pci_init_queues(struct 
- 	entry_priv = rt2x00dev->rx->entries[0].priv_data;
- 	rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
- 	rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
--	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0);
-+	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
- 	rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
- 
- 	/*
-@@ -1613,7 +1750,7 @@ static int rt2800pci_init_bbp(struct rt2
- 	rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
- 	rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
- 	rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
--	rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
-+	rt2800pci_bbp_write(rt2x00dev, 105, 0x01);
- 
- 	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
- 		rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-@@ -1623,6 +1760,12 @@ static int rt2800pci_init_bbp(struct rt2
- 	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
- 		rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
- 
-+	if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
-+		rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
-+		rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
-+		rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
-+	}
-+
- 	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
- 		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
- 
-@@ -1636,6 +1779,144 @@ static int rt2800pci_init_bbp(struct rt2
- 	return 0;
- }
- 
-+static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
-+				   bool bw40, u8 rfcsr24, u8 filter_target)
-+{
-+	unsigned int i;
-+	u8 bbp;
-+	u8 rfcsr;
-+	u8 passband;
-+	u8 stopband;
-+	u8 overtuned = 0;
-+
-+	rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+
-+	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
-+	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-+
-+	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
-+	rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+	/*
-+	 * Set power & frequency of passband test tone
-+	 */
-+	rt2800pci_bbp_write(rt2x00dev, 24, 0);
-+
-+	for (i = 0; i < 100; i++) {
-+		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
-+		msleep(1);
-+
-+		rt2800pci_bbp_read(rt2x00dev, 55, &passband);
-+		if (passband)
-+			break;
-+	}
-+
-+	/*
-+	 * Set power & frequency of stopband test tone
-+	 */
-+	rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
-+
-+	for (i = 0; i < 100; i++) {
-+		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
-+		msleep(1);
-+
-+		rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
-+
-+		if ((passband - stopband) <= filter_target) {
-+			rfcsr24++;
-+			overtuned += ((passband - stopband) == filter_target);
-+		} else
-+			break;
-+
-+		rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+	}
-+
-+	rfcsr24 -= !!overtuned;
-+
-+	rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+	return rfcsr24;
-+}
-+
-+static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
-+{
-+	u8 rfcsr;
-+	u8 bbp;
-+	
-+	if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-+	    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
-+	    !rt2x00_rf(&rt2x00dev->chip, RF3022))
-+		return 0;
-+
-+	/*
-+	 * Init RF calibration.
-+	 */
-+	rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
-+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
-+	rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
-+	msleep(1);
-+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
-+	rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
-+
-+	rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
-+	rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
-+	rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
-+	rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
-+	rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
-+	rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
-+	rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
-+	rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
-+	rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
-+	rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
-+	rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
-+	rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
-+	rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
-+	rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
-+	rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
-+	rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
-+	rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
-+	rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
-+	rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
-+	rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
-+	rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
-+	rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
-+	rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
-+	rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
-+	rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
-+	rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
-+	rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
-+	rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
-+	rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
-+	rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
-+
-+	/*
-+	 * Set RX Filter calibration for 20MHz and 40MHz
-+	 */
-+	rt2x00dev->calibration_bw20 =
-+	    rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-+	rt2x00dev->calibration_bw40 =
-+	    rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-+
-+	/*
-+	 * Set back to initial state
-+	 */
-+	rt2800pci_bbp_write(rt2x00dev, 24, 0);
-+
-+	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
-+	rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+	/*
-+	 * set BBP back to BW20
-+	 */
-+	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-+	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-+
-+	return 0;
-+}
-+
- /*
-  * Device state switch handlers.
-  */
-@@ -1718,7 +1999,8 @@ static int rt2800pci_enable_radio(struct
- 		     rt2800pci_init_queues(rt2x00dev) ||
- 		     rt2800pci_init_registers(rt2x00dev) ||
- 		     rt2800pci_wait_wpdma_ready(rt2x00dev) ||
--		     rt2800pci_init_bbp(rt2x00dev)))
-+		     rt2800pci_init_bbp(rt2x00dev) ||
-+		     rt2800pci_init_rfcsr(rt2x00dev)))
- 		return -EIO;
- 
- 	/*
-@@ -2114,6 +2396,12 @@ static void rt2800pci_fill_rxdone(struct
- 	rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
- 
- 	/*
-+	 * Set RX IDX in register to inform hardware that we have handled
-+	 * this entry and it is available for reuse again.
-+	 */
-+	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
-+
-+	/*
- 	 * Remove TXWI descriptor from start of buffer.
- 	 */
- 	skb_pull(entry->skb, RXWI_DESC_SIZE);
-@@ -2380,7 +2668,8 @@ static int rt2800pci_init_eeprom(struct 
- 	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
- 	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
- 	    !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
--	    !rt2x00_rf(&rt2x00dev->chip, RF3052)) {
-+	    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
-+	    !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
- 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
- 		return -ENODEV;
- 	}
-@@ -2528,7 +2817,8 @@ static int rt2800pci_probe_hw_mode(struc
- 
- 	if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
- 	    rt2x00_rf(&rt2x00dev->chip, RF2720) ||
--	    rt2x00_rf(&rt2x00dev->chip, RF3052)) {
-+	    rt2x00_rf(&rt2x00dev->chip, RF3021) ||
-+	    rt2x00_rf(&rt2x00dev->chip, RF3022)) {
- 		spec->num_channels = 14;
- 		spec->channels = rf_vals;
- 	} else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
-@@ -2624,7 +2914,9 @@ static int rt2800pci_probe_hw(struct rt2
- 	/*
- 	 * This device requires firmware.
- 	 */
--	__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
-+	if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
-+	    !rt2x00_rt(&rt2x00dev->chip, RT3052))
-+		__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
- 	if (!modparam_nohwcrypt)
- 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
- 
---- a/drivers/net/wireless/rt2x00/rt2800pci.h
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
-@@ -36,7 +36,8 @@
-  * RF2750 2.4G/5G 1T2R
-  * RF3020 2.4G 1T1R
-  * RF2020 2.4G B/G
-- * RF3052 2.4G 2T2R
-+ * RF3021 2.4G 1T2R
-+ * RF3022 2.4G 2T2R
-  */
- #define RF2820				0x0001
- #define RF2850				0x0002
-@@ -44,7 +45,8 @@
- #define RF2750				0x0004
- #define RF3020				0x0005
- #define RF2020				0x0006
--#define RF3052				0x0008
-+#define RF3021				0x0007
-+#define RF3022				0x0008
- 
- /*
-  * RT2860 version
-@@ -373,6 +375,15 @@
- #define PBF_DBG				0x043c
- 
- /*
-+ * RF registers
-+ */
-+#define	RF_CSR_CFG			0x0500
-+#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
-+#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
-+#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
-+#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
-+
-+/*
-  * MAC Control/Status Registers(CSR).
-  * Some values are set in TU, whereas 1 TU == 1024 us.
-  */
-@@ -1465,6 +1476,48 @@ struct mac_iveiv_entry {
-  * BBP 3: RX Antenna
-  */
- #define BBP3_RX_ANTENNA			FIELD8(0x18)
-+#define BBP3_HT40_PLUS			FIELD8(0x20)
-+
-+/*
-+ * BBP 4: Bandwidth
-+ */
-+#define BBP4_TX_BF			FIELD8(0x01)
-+#define BBP4_BANDWIDTH			FIELD8(0x18)
-+
-+/*
-+ * RFCSR registers
-+ * The wordsize of the RFCSR is 8 bits.
-+ */
-+
-+/*
-+ * RFCSR 6:
-+ */
-+#define RFCSR6_R			FIELD8(0x03)
-+
-+/*
-+ * RFCSR 7:
-+ */
-+#define RFCSR7_RF_TUNING		FIELD8(0x01)
-+
-+/*
-+ * RFCSR 12:
-+ */
-+#define RFCSR12_TX_POWER		FIELD8(0x1f)
-+
-+/*
-+ * RFCSR 22:
-+ */
-+#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
-+
-+/*
-+ * RFCSR 23:
-+ */
-+#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
-+
-+/*
-+ * RFCSR 30:
-+ */
-+#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
- 
- /*
-  * RF registers
diff --git a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch b/package/mac80211/patches/308-rt2x00-Implement-support-for-rt2800usb.patch
index c9152fd366..946dfa1e0b 100644
--- a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch
+++ b/package/mac80211/patches/308-rt2x00-Implement-support-for-rt2800usb.patch
@@ -1,7 +1,7 @@
-From 101b65d221593c1bdeacf0c6085d885ea5447c4c Mon Sep 17 00:00:00 2001
+From 3924d0442771e17c26ab10ad53a1807e800ab3f1 Mon Sep 17 00:00:00 2001
 From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 14 Mar 2009 20:46:40 +0100
-Subject: [PATCH] rt2x00: Implement support for rt2800usb
+Date: Sat, 28 Mar 2009 20:48:56 +0100
+Subject: [PATCH 9/9] rt2x00: Implement support for rt2800usb
 
 Add support for the rt2800usb chipset.
 
@@ -15,23 +15,23 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 ---
  drivers/net/wireless/rt2x00/Kconfig     |   14 +
  drivers/net/wireless/rt2x00/Makefile    |    1 +
- drivers/net/wireless/rt2x00/rt2800usb.c | 3032 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800usb.c | 3036 +++++++++++++++++++++++++++++++
  drivers/net/wireless/rt2x00/rt2800usb.h | 1934 ++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00.h    |    7 +
- 5 files changed, 4988 insertions(+), 0 deletions(-)
+ drivers/net/wireless/rt2x00/rt2x00.h    |    1 +
+ 5 files changed, 4986 insertions(+), 0 deletions(-)
  create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c
  create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h
 
 --- a/drivers/net/wireless/rt2x00/Makefile
 +++ b/drivers/net/wireless/rt2x00/Makefile
-@@ -19,3 +19,4 @@ obj-$(CONFIG_RT61PCI)			+= rt61pci.o
+@@ -20,3 +20,4 @@ obj-$(CONFIG_RT61PCI)			+= rt61pci.o
  obj-$(CONFIG_RT2800PCI)			+= rt2800pci.o
  obj-$(CONFIG_RT2500USB)			+= rt2500usb.o
  obj-$(CONFIG_RT73USB)			+= rt73usb.o
 +obj-$(CONFIG_RT2800USB)			+= rt2800usb.o
 --- /dev/null
 +++ b/drivers/net/wireless/rt2x00/rt2800usb.c
-@@ -0,0 +1,3032 @@
+@@ -0,0 +1,3036 @@
 +/*
 +	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
 +	<http://rt2x00.serialmonkey.com>
@@ -2472,8 +2472,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	/* 802.11 HyperLan 2 */
 +	{ 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
 +	{ 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
-+	{ 104, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed1a3 },
-+	{ 108, 0x18402ecc, 0x184c0a32, 0x18578a55, 0x180ed193 },
++	{ 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
++	{ 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
 +	{ 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
 +	{ 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
 +	{ 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
@@ -2495,6 +2495,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +	{ 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
 +	{ 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
 +	{ 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
++	{ 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
++	{ 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
++	{ 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
++	{ 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
 +
 +	/* 802.11 Japan */
 +	{ 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
@@ -5011,16 +5015,3 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
  
  	u16 rf;
  	u32 rev;
-@@ -788,6 +789,12 @@ struct rt2x00_dev {
- 	u8 freq_offset;
- 
- 	/*
-+	 * Calibration information (for rt2800usb).
-+	 */
-+	u8 calibration_bw20;
-+	u8 calibration_bw40;
-+
-+	/*
- 	 * Low level statistics which will have
- 	 * to be kept up to date while device is running.
- 	 */
diff --git a/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch b/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch
deleted file mode 100644
index 25c07791f0..0000000000
--- a/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From e6cbd7e05f7c1fe0a737526d20f39b4a52e03ae8 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 17 Mar 2009 14:01:29 +0100
-Subject: [PATCH] rt2x00: Fix compile errors for SoC
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c |   37 +++++++++++++++----------------
- 1 files changed, 18 insertions(+), 19 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -3186,7 +3186,7 @@ MODULE_LICENSE("GPL");
- #define WSOC_RT_CHIPSET		RT3052
- #endif /* CONFIG_RALINK_RT305X */
- 
--static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev)
-+static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
- {
- 	kfree(rt2x00dev->rf);
- 	rt2x00dev->rf = NULL;
-@@ -3195,7 +3195,7 @@ static void rt2800soc_free_reg(struct rt
- 	rt2x00dev->eeprom = NULL;
- }
- 
--static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
-+static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
- {
- 	struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
- 	struct resource *res;
-@@ -3219,14 +3219,14 @@ static int rt2800soc_alloc_reg(struct rt
- 
- exit:
- 	ERROR_PROBE("Failed to allocate registers.\n");
--	rt2800soc_free_reg(rt2x00dev);
-+	rt2x00soc_free_reg(rt2x00dev);
- 
- 	return -ENOMEM;
- }
- 
--static int rt2800soc_probe(struct platform_device *pdev)
-+static int rt2x00soc_probe(struct platform_device *pdev)
- {
--	struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p;
-+	const struct rt2x00_ops *ops = &rt2800pci_ops;
- 	struct ieee80211_hw *hw;
- 	struct rt2x00_dev *rt2x00dev;
- 	int retval;
-@@ -3248,7 +3248,7 @@ static int rt2800soc_probe(struct platfo
- 
- 	rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET);
- 
--	retval = rt2800soc_alloc_reg(rt2x00dev);
-+	retval = rt2x00soc_alloc_reg(rt2x00dev);
- 	if (retval)
- 		goto exit_free_device;
- 
-@@ -3259,7 +3259,7 @@ static int rt2800soc_probe(struct platfo
- 	return 0;
- 
- exit_free_reg:
--	rt2800soc_free_reg(rt2x00dev);
-+	rt2x00soc_free_reg(rt2x00dev);
- 
- exit_free_device:
- 	ieee80211_free_hw(hw);
-@@ -3267,7 +3267,7 @@ exit_free_device:
- 	return retval;
- }
- 
--static int rt2800soc_remove(struct platform_device *pdev)
-+static int rt2x00soc_remove(struct platform_device *pdev)
- {
- 	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
- 	struct rt2x00_dev *rt2x00dev = hw->priv;
-@@ -3276,16 +3276,16 @@ static int rt2800soc_remove(struct platf
- 	 * Free all allocated data.
- 	 */
- 	rt2x00lib_remove_dev(rt2x00dev);
--	rt2800soc_free_reg(rt2x00dev);
-+	rt2x00soc_free_reg(rt2x00dev);
- 	ieee80211_free_hw(hw);
- 
- 	return 0;
- }
- 
- #ifdef CONFIG_PM
--int rt2x00soc_suspend(struct device *dev, pm_message_t state)
-+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
- {
--	struct ieee80211_hw *hw = dev_get_drvdata(dev);
-+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
- 	struct rt2x00_dev *rt2x00dev = hw->priv;
- 	int retval;
- 
-@@ -3293,14 +3293,14 @@ int rt2x00soc_suspend(struct device *dev
- 	if (retval)
- 		return retval;
- 
--	rt2800soc_free_reg(rt2x00dev);
-+	rt2x00soc_free_reg(rt2x00dev);
- 
- 	return 0;
- }
- 
--int rt2x00soc_resume(struct device *dev)
-+int rt2x00soc_resume(struct platform_device *pdev)
- {
--	struct ieee80211_hw *hw = dev_get_drvdata(dev);
-+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
- 	struct rt2x00_dev *rt2x00dev = hw->priv;
- 	int retval;
- 
-@@ -3315,7 +3315,7 @@ int rt2x00soc_resume(struct device *dev)
- 	return 0;
- 
- exit_free_reg:
--	rt2x00pci_free_reg(rt2x00dev);
-+	rt2x00soc_free_reg(rt2x00dev);
- 
- 	return retval;
- }
-@@ -3326,10 +3326,9 @@ static struct platform_driver rt2800soc_
- 		.name		= "rt2800_wmac",
- 		.owner		= THIS_MODULE,
- 		.mod_name	= KBUILD_MODNAME,
--		.p		= &rt2800pci_ops;
--	}
--	.probe		= rt2800soc_probe,
--	.remove		= __devexit_p(rt2800soc_remove),
-+	},
-+	.probe		= rt2x00soc_probe,
-+	.remove		= __devexit_p(rt2x00soc_remove),
- 	.suspend	= rt2x00soc_suspend,
- 	.resume		= rt2x00soc_resume,
- };
diff --git a/package/mac80211/patches/520-b43-autodepend-on-hwrandom.patch b/package/mac80211/patches/520-b43-autodepend-on-hwrandom.patch
index c79f6573f5..9ffdadfd26 100644
--- a/package/mac80211/patches/520-b43-autodepend-on-hwrandom.patch
+++ b/package/mac80211/patches/520-b43-autodepend-on-hwrandom.patch
@@ -4,10 +4,8 @@ This patch is submitted upstream and can be removed when it hits compat-wireless
 
 
 
-Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/b43.h
-===================================================================
---- compat-wireless-2009-03-24.orig/drivers/net/wireless/b43/b43.h	2009-03-29 13:27:05.000000000 +0200
-+++ compat-wireless-2009-03-24/drivers/net/wireless/b43/b43.h	2009-03-29 13:27:21.000000000 +0200
+--- a/drivers/net/wireless/b43/b43.h
++++ b/drivers/net/wireless/b43/b43.h
 @@ -624,9 +624,11 @@ struct b43_wl {
  	/* Stats about the wireless interface */
  	struct ieee80211_low_level_stats ieee_stats;
@@ -21,10 +19,8 @@ Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/b43.h
  
  	/* The RF-kill button */
  	struct b43_rfkill rfkill;
-Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/main.c
-===================================================================
---- compat-wireless-2009-03-24.orig/drivers/net/wireless/b43/main.c	2009-03-29 13:27:05.000000000 +0200
-+++ compat-wireless-2009-03-24/drivers/net/wireless/b43/main.c	2009-03-29 13:27:21.000000000 +0200
+--- a/drivers/net/wireless/b43/main.c
++++ b/drivers/net/wireless/b43/main.c
 @@ -2982,6 +2982,7 @@ static void b43_security_init(struct b43
  	b43_clear_keys(dev);
  }
@@ -64,10 +60,8 @@ Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/main.c
  
  	return err;
  }
-Index: compat-wireless-2009-03-24/config.mk
-===================================================================
---- compat-wireless-2009-03-24.orig/config.mk	2009-03-29 13:28:03.000000000 +0200
-+++ compat-wireless-2009-03-24/config.mk	2009-03-29 13:28:32.000000000 +0200
+--- a/config.mk
++++ b/config.mk
 @@ -148,6 +148,7 @@ CONFIG_ATH9K_DEBUG=y
  # CONFIG_B43_PIO=y
  # CONFIG_B43_LEDS=y