iw: add support for the new survey data

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23351 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 152 insertions, 11 deletions

diff --git a/package/iw/patches/001-nl80211_sync.patch b/package/iw/patches/001-nl80211_sync.patch
index ef3bd15dd6..83da75e07c 100644
--- a/package/iw/patches/001-nl80211_sync.patch
+++ b/package/iw/patches/001-nl80211_sync.patch
@@ -11,7 +11,35 @@
   *	It is also sent as an event, with the BSSID and response IEs when the
   *	connection is established or failed to be established. This can be
   *	determined by the STATUS_CODE attribute.
-@@ -686,6 +688,15 @@ enum nl80211_commands {
+@@ -313,8 +315,8 @@
+  *	channel for the specified amount of time. This can be used to do
+  *	off-channel operations like transmit a Public Action frame and wait for
+  *	a response while being associated to an AP on another channel.
+- *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
+- *	radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
++ *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
++ *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+  *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+  *	optionally used to specify additional channel parameters.
+  *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+@@ -385,6 +387,8 @@
+  *	of any other interfaces, and other interfaces will again take
+  *	precedence when they are used.
+  *
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -487,6 +491,7 @@ enum nl80211_commands {
+ 	NL80211_CMD_NOTIFY_CQM,
+ 
+ 	NL80211_CMD_SET_CHANNEL,
++	NL80211_CMD_SET_WDS_PEER,
+ 
+ 	/* add new commands above here */
+ 
+@@ -686,6 +691,15 @@ enum nl80211_commands {
   *	request, the driver will assume that the port is unauthorized until
   *	authorized by user space. Otherwise, port is marked authorized by
   *	default in station mode.
@@ -27,17 +55,29 @@
   *
   * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
   *	We recommend using nested, driver-specific attributes within this.
-@@ -951,6 +962,9 @@ enum nl80211_attrs {
+@@ -787,6 +801,9 @@ enum nl80211_commands {
+  *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
+  *      for non-automatic settings.
+  *
++ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
++ *	means support for per-station GTKs.
++ *
+  * @NL80211_ATTR_MAX: highest attribute number currently defined
+  * @__NL80211_ATTR_AFTER_LAST: internal use
+  */
+@@ -951,6 +968,11 @@ enum nl80211_attrs {
  	NL80211_ATTR_RX_FRAME_TYPES,
  	NL80211_ATTR_FRAME_TYPE,
  
 +	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
 +	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
 +
++	NL80211_ATTR_SUPPORT_IBSS_RSN,
++
  	/* add attributes here, update the policy in nl80211.c */
  
  	__NL80211_ATTR_AFTER_LAST,
-@@ -1006,6 +1020,8 @@ enum nl80211_attrs {
+@@ -1006,6 +1028,8 @@ enum nl80211_attrs {
   * @NL80211_IFTYPE_WDS: wireless distribution interface
   * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
   * @NL80211_IFTYPE_MESH_POINT: mesh point
@@ -46,7 +86,7 @@
   * @NL80211_IFTYPE_MAX: highest interface type number currently defined
   * @NUM_NL80211_IFTYPES: number of defined interface types
   *
-@@ -1022,6 +1038,8 @@ enum nl80211_iftype {
+@@ -1022,6 +1046,8 @@ enum nl80211_iftype {
  	NL80211_IFTYPE_WDS,
  	NL80211_IFTYPE_MONITOR,
  	NL80211_IFTYPE_MESH_POINT,
@@ -55,19 +95,85 @@
  
  	/* keep last */
  	NUM_NL80211_IFTYPES,
-@@ -1382,6 +1400,7 @@ enum nl80211_reg_rule_flags {
+@@ -1111,6 +1137,8 @@ enum nl80211_rate_info {
+  * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+  *	station)
++ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
++ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+  */
+ enum nl80211_sta_info {
+ 	__NL80211_STA_INFO_INVALID,
+@@ -1124,6 +1152,8 @@ enum nl80211_sta_info {
+ 	NL80211_STA_INFO_TX_BITRATE,
+ 	NL80211_STA_INFO_RX_PACKETS,
+ 	NL80211_STA_INFO_TX_PACKETS,
++	NL80211_STA_INFO_TX_RETRIES,
++	NL80211_STA_INFO_TX_FAILED,
+ 
+ 	/* keep last */
+ 	__NL80211_STA_INFO_AFTER_LAST,
+@@ -1382,6 +1412,17 @@ enum nl80211_reg_rule_flags {
   * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
   * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
   * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
 + * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
++ *	spent on this channel
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
++ *	channel was sensed busy (either due to activity or energy detect)
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
++ *	channel was sensed busy
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
++ *	receiving data
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
++ *	transmitting data
   * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
   *	currently defined
   * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
-@@ -1390,6 +1409,7 @@ enum nl80211_survey_info {
+@@ -1390,6 +1431,12 @@ enum nl80211_survey_info {
  	__NL80211_SURVEY_INFO_INVALID,
  	NL80211_SURVEY_INFO_FREQUENCY,
  	NL80211_SURVEY_INFO_NOISE,
 +	NL80211_SURVEY_INFO_IN_USE,
++	NL80211_SURVEY_INFO_CHANNEL_TIME,
++	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
++	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
++	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
++	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
  
  	/* keep last */
  	__NL80211_SURVEY_INFO_AFTER_LAST,
+@@ -1636,11 +1683,14 @@ enum nl80211_auth_type {
+  * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+  * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+  * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
++ * @NUM_NL80211_KEYTYPES: number of defined key types
+  */
+ enum nl80211_key_type {
+ 	NL80211_KEYTYPE_GROUP,
+ 	NL80211_KEYTYPE_PAIRWISE,
+ 	NL80211_KEYTYPE_PEERKEY,
++
++	NUM_NL80211_KEYTYPES
+ };
+ 
+ /**
+@@ -1671,6 +1721,9 @@ enum nl80211_wpa_versions {
+  *	CCMP keys, each six bytes in little endian
+  * @NL80211_KEY_DEFAULT: flag indicating default key
+  * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
++ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
++ *	specified the default depends on whether a MAC address was
++ *	given with the command using the key or not (u32)
+  * @__NL80211_KEY_AFTER_LAST: internal
+  * @NL80211_KEY_MAX: highest key attribute
+  */
+@@ -1682,6 +1735,7 @@ enum nl80211_key_attributes {
+ 	NL80211_KEY_SEQ,
+ 	NL80211_KEY_DEFAULT,
+ 	NL80211_KEY_DEFAULT_MGMT,
++	NL80211_KEY_TYPE,
+ 
+ 	/* keep last */
+ 	__NL80211_KEY_AFTER_LAST,
diff --git a/package/iw/patches/100-survey_freq_in_use.patch b/package/iw/patches/100-survey_freq_in_use.patch
index e6e7eafdf4..3933ae379f 100644
--- a/package/iw/patches/100-survey_freq_in_use.patch
+++ b/package/iw/patches/100-survey_freq_in_use.patch
@@ -1,11 +1,14 @@
 --- a/survey.c
 +++ b/survey.c
-@@ -46,6 +46,8 @@ static int print_survey_handler(struct n
+@@ -44,8 +44,9 @@ static int print_survey_handler(struct n
+ 	}
+ 
  	if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
- 		printf("\tfrequency:\t%u MHz\n",
- 			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]));
-+	if (sinfo[NL80211_SURVEY_INFO_IN_USE])
-+		printf("\tin use\n");
+-		printf("\tfrequency:\t%u MHz\n",
+-			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]));
++		printf("\tfrequency:\t%u MHz%s\n",
++			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
++			sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
  	if (sinfo[NL80211_SURVEY_INFO_NOISE])
  		printf("\tnoise:\t\t%d dBm\n",
  			(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
diff --git a/package/iw/patches/110-survey_phy_stats.patch b/package/iw/patches/110-survey_phy_stats.patch
new file mode 100644
index 0000000000..cdd5c2e487
--- /dev/null
+++ b/package/iw/patches/110-survey_phy_stats.patch
@@ -0,0 +1,32 @@
+--- a/survey.c
++++ b/survey.c
+@@ -44,12 +44,27 @@ static int print_survey_handler(struct n
+ 	}
+ 
+ 	if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
+-		printf("\tfrequency:\t%u MHz%s\n",
++		printf("\tfrequency:\t\t\t%u MHz%s\n",
+ 			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
+ 			sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
+ 	if (sinfo[NL80211_SURVEY_INFO_NOISE])
+-		printf("\tnoise:\t\t%d dBm\n",
++		printf("\tnoise:\t\t\t\t%d dBm\n",
+ 			(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME])
++		printf("\tchannel active time:\t\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY])
++		printf("\tchannel busy time:\t\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY])
++		printf("\textension channel busy time:\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX])
++		printf("\tchannel receive time:\t\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX])
++		printf("\tchannel transmit time:\t\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX]));
+ 	return NL_SKIP;
+ }
+