remove broadcom-57xx (only used on linux 2.4)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21953 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 1324 deletions

diff --git a/package/broadcom-57xx/src/bcmrobo.c b/package/broadcom-57xx/src/bcmrobo.c
deleted file mode 100644
index b60db494a4..0000000000
--- a/package/broadcom-57xx/src/bcmrobo.c
+++ /dev/null
@@ -1,1324 +0,0 @@
-/*
- * Broadcom BCM5325E/536x switch configuration module
- *
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * Based on:
- *   Broadcom 53xx RoboSwitch device driver.
- *
- *   Copyright 2007, Broadcom Corporation
- *   All Rights Reserved.
- * 
- *   THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- *   KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- *   SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- *   FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-
-#include <linux/autoconf.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-
-#include <typedefs.h>
-#include <osl.h>
-#include <sbutils.h>
-#include <sbconfig.h>
-#include <bcmendian.h>
-#include "bcmparams.h"
-#include <bcmnvram.h>
-#include <bcmdevs.h>
-#include "bcmrobo.h"
-#include "proto/ethernet.h"
-#include <switch-core.h>
-
-#define DRIVER_NAME		"bcm57xx"
-#define DRIVER_VERSION	"0.1"
-
-#ifndef GPIO_PIN_NOTDEFINED
-#define GPIO_PIN_NOTDEFINED	0x20
-#endif
-
-#ifdef	BCMDBG
-#define	ET_ERROR(args)	printk args
-#else	/* BCMDBG */
-#define	ET_ERROR(args)
-#endif	/* BCMDBG */
-#define	ET_MSG(args)
-
-/*
- * Switch can be programmed through SPI interface, which
- * has a rreg and a wreg functions to read from and write to
- * registers.
- */
-
-/* MII access registers */
-#define PSEUDO_PHYAD	0x1E	/* MII Pseudo PHY address */
-#define REG_MII_PAGE	0x10	/* MII Page register */
-#define REG_MII_ADDR	0x11	/* MII Address register */
-#define REG_MII_DATA0	0x18	/* MII Data register 0 */
-#define REG_MII_DATA1	0x19	/* MII Data register 1 */
-#define REG_MII_DATA2	0x1a	/* MII Data register 2 */
-#define REG_MII_DATA3	0x1b	/* MII Data register 3 */
-
-/* Page numbers */
-#define PAGE_CTRL	0x00	/* Control page */
-#define PAGE_MMR	0x02	/* 5397 Management/Mirroring page */
-#define PAGE_VTBL	0x05	/* ARL/VLAN Table access page */
-#define PAGE_VLAN	0x34	/* VLAN page */
-
-/* Control page registers */
-#define REG_CTRL_PORT0	0x00	/* Port 0 traffic control register */
-#define REG_CTRL_PORT1	0x01	/* Port 1 traffic control register */
-#define REG_CTRL_PORT2	0x02	/* Port 2 traffic control register */
-#define REG_CTRL_PORT3	0x03	/* Port 3 traffic control register */
-#define REG_CTRL_PORT4	0x04	/* Port 4 traffic control register */
-#define REG_CTRL_PORT5	0x05	/* Port 5 traffic control register */
-#define REG_CTRL_PORT6	0x06	/* Port 6 traffic control register */
-#define REG_CTRL_PORT7	0x07	/* Port 7 traffic control register */
-#define REG_CTRL_MODE	0x0B	/* Switch Mode register */
-#define REG_CTRL_MIIPO	0x0E	/* 5325: MII Port Override register */
-#define REG_CTRL_SRST	0x79	/* Software reset control register */
-
-#define REG_DEVICE_ID	0x30	/* 539x Device id: */
-#define	DEVID5325	0x25	/*  5325 (Not really be we fake it) */
-#define	DEVID5395	0x95	/*  5395 */
-#define	DEVID5397	0x97	/*  5397 */
-#define	DEVID5398	0x98	/*  5398 */
-#define	DEVID53115	0x3115	/* 53115 */
-
-/* VLAN page registers */
-#define REG_VLAN_CTRL0	0x00	/* VLAN Control 0 register */
-#define REG_VLAN_CTRL1	0x01	/* VLAN Control 1 register */
-#define REG_VLAN_CTRL4	0x04	/* VLAN Control 4 register */
-#define REG_VLAN_CTRL5	0x05	/* VLAN Control 5 register */
-#define REG_VLAN_ACCESS	0x06	/* VLAN Table Access register */
-#define REG_VLAN_WRITE	0x08	/* VLAN Write register */
-#define REG_VLAN_READ	0x0C	/* VLAN Read register */
-#define REG_VLAN_PTAG0	0x10	/* VLAN Default Port Tag register - port 0 */
-#define REG_VLAN_PTAG1	0x12	/* VLAN Default Port Tag register - port 1 */
-#define REG_VLAN_PTAG2	0x14	/* VLAN Default Port Tag register - port 2 */
-#define REG_VLAN_PTAG3	0x16	/* VLAN Default Port Tag register - port 3 */
-#define REG_VLAN_PTAG4	0x18	/* VLAN Default Port Tag register - port 4 */
-#define REG_VLAN_PTAG5	0x1a	/* VLAN Default Port Tag register - port 5 */
-#define REG_VLAN_PTAG6	0x1c	/* VLAN Default Port Tag register - port 6 */
-#define REG_VLAN_PTAG7	0x1e	/* VLAN Default Port Tag register - port 7 */
-#define REG_VLAN_PTAG8	0x20	/* 539x: VLAN Default Port Tag register - IMP port */
-#define REG_VLAN_PMAP	0x20	/* 5325: VLAN Priority Re-map register */
-
-#define VLAN_NUMVLANS	16	/* # of VLANs */
-
-
-/* ARL/VLAN Table Access page registers */
-#define REG_VTBL_CTRL		0x00	/* ARL Read/Write Control */
-#define REG_VTBL_MINDX		0x02	/* MAC Address Index */
-#define REG_VTBL_VINDX		0x08	/* VID Table Index */
-#define REG_VTBL_ARL_E0		0x10	/* ARL Entry 0 */
-#define REG_VTBL_ARL_E1		0x18	/* ARL Entry 1 */
-#define REG_VTBL_DAT_E0		0x18	/* ARL Table Data Entry 0 */
-#define REG_VTBL_SCTRL		0x20	/* ARL Search Control */
-#define REG_VTBL_SADDR		0x22	/* ARL Search Address */
-#define REG_VTBL_SRES		0x24	/* ARL Search Result */
-#define REG_VTBL_SREXT		0x2c	/* ARL Search Result */
-#define REG_VTBL_VID_E0		0x30	/* VID Entry 0 */
-#define REG_VTBL_VID_E1		0x32	/* VID Entry 1 */
-#define REG_VTBL_PREG		0xFF	/* Page Register */
-#define REG_VTBL_ACCESS		0x60	/* VLAN table access register */
-#define REG_VTBL_INDX		0x61	/* VLAN table address index register */
-#define REG_VTBL_ENTRY		0x63	/* VLAN table entry register */
-#define REG_VTBL_ACCESS_5395	0x80	/* VLAN table access register */
-#define REG_VTBL_INDX_5395	0x81	/* VLAN table address index register */
-#define REG_VTBL_ENTRY_5395	0x83	/* VLAN table entry register */
-
-/* SPI registers */
-#define REG_SPI_PAGE	0xff	/* SPI Page register */
-
-/* Access switch registers through GPIO/SPI */
-
-/* Minimum timing constants */
-#define SCK_EDGE_TIME	2	/* clock edge duration - 2us */
-#define MOSI_SETUP_TIME	1	/* input setup duration - 1us */
-#define SS_SETUP_TIME	1 	/* select setup duration - 1us */
-
-/* misc. constants */
-#define SPI_MAX_RETRY	100
-
-static int config_attach(robo_info_t *robo);
-static void config_detach(robo_info_t *robo);
-
-/* Enable GPIO access to the chip */
-static void
-gpio_enable(robo_info_t *robo)
-{
-	/* Enable GPIO outputs with SCK and MOSI low, SS high */
-	sb_gpioout(robo->sbh, robo->ss | robo->sck | robo->mosi, robo->ss, GPIO_DRV_PRIORITY);
-	sb_gpioouten(robo->sbh, robo->ss | robo->sck | robo->mosi,
-	             robo->ss | robo->sck | robo->mosi, GPIO_DRV_PRIORITY);
-}
-
-/* Disable GPIO access to the chip */
-static void
-gpio_disable(robo_info_t *robo)
-{
-	/* Disable GPIO outputs with all their current values */
-	sb_gpioouten(robo->sbh, robo->ss | robo->sck | robo->mosi, 0, GPIO_DRV_PRIORITY);
-}
-
-/* Write a byte stream to the chip thru SPI */
-static int
-spi_write(robo_info_t *robo, uint8 *buf, uint len)
-{
-	uint i;
-	uint8 mask;
-
-	/* Byte bang from LSB to MSB */
-	for (i = 0; i < len; i++) {
-		/* Bit bang from MSB to LSB */
-		for (mask = 0x80; mask; mask >>= 1) {
-			/* Clock low */
-			sb_gpioout(robo->sbh, robo->sck, 0, GPIO_DRV_PRIORITY);
-			OSL_DELAY(SCK_EDGE_TIME);
-
-			/* Sample on rising edge */
-			if (mask & buf[i])
-				sb_gpioout(robo->sbh, robo->mosi, robo->mosi, GPIO_DRV_PRIORITY);
-			else
-				sb_gpioout(robo->sbh, robo->mosi, 0, GPIO_DRV_PRIORITY);
-			OSL_DELAY(MOSI_SETUP_TIME);
-
-			/* Clock high */
-			sb_gpioout(robo->sbh, robo->sck, robo->sck, GPIO_DRV_PRIORITY);
-			OSL_DELAY(SCK_EDGE_TIME);
-		}
-	}
-
-	return 0;
-}
-
-/* Read a byte stream from the chip thru SPI */
-static int
-spi_read(robo_info_t *robo, uint8 *buf, uint len)
-{
-	uint i, timeout;
-	uint8 rack, mask, byte;
-
-	/* Timeout after 100 tries without RACK */
-	for (i = 0, rack = 0, timeout = SPI_MAX_RETRY; i < len && timeout;) {
-		/* Bit bang from MSB to LSB */
-		for (mask = 0x80, byte = 0; mask; mask >>= 1) {
-			/* Clock low */
-			sb_gpioout(robo->sbh, robo->sck, 0, GPIO_DRV_PRIORITY);
-			OSL_DELAY(SCK_EDGE_TIME);
-
-			/* Sample on falling edge */
-			if (sb_gpioin(robo->sbh) & robo->miso)
-				byte |= mask;
-
-			/* Clock high */
-			sb_gpioout(robo->sbh, robo->sck, robo->sck, GPIO_DRV_PRIORITY);
-			OSL_DELAY(SCK_EDGE_TIME);
-		}
-		/* RACK when bit 0 is high */
-		if (!rack) {
-			rack = (byte & 1);
-			timeout--;
-			continue;
-		}
-		/* Byte bang from LSB to MSB */
-		buf[i] = byte;
-		i++;
-	}
-
-	if (timeout == 0) {
-		ET_ERROR(("spi_read: timeout"));
-		return -1;
-	}
-
-	return 0;
-}
-
-/* Enable/disable SPI access */
-static void
-spi_select(robo_info_t *robo, uint8 spi)
-{
-	if (spi) {
-		/* Enable SPI access */
-		sb_gpioout(robo->sbh, robo->ss, 0, GPIO_DRV_PRIORITY);
-	} else {
-		/* Disable SPI access */
-		sb_gpioout(robo->sbh, robo->ss, robo->ss, GPIO_DRV_PRIORITY);
-	}
-	OSL_DELAY(SS_SETUP_TIME);
-}
-
-
-/* Select chip and page */
-static void
-spi_goto(robo_info_t *robo, uint8 page)
-{
-	uint8 reg8 = REG_SPI_PAGE;	/* page select register */
-	uint8 cmd8;
-
-	/* Issue the command only when we are on a different page */
-	if (robo->page == page)
-		return;
-
-	robo->page = page;
-
-	/* Enable SPI access */
-	spi_select(robo, 1);
-
-	/* Select new page with CID 0 */
-	cmd8 = ((6 << 4) |		/* normal SPI */
-	        1);			/* write */
-	spi_write(robo, &cmd8, 1);
-	spi_write(robo, &reg8, 1);
-	spi_write(robo, &page, 1);
-
-	/* Disable SPI access */
-	spi_select(robo, 0);
-}
-
-/* Write register thru SPI */
-static int
-spi_wreg(robo_info_t *robo, uint8 page, uint8 addr, void *val, int len)
-{
-	int status = 0;
-	uint8 cmd8;
-	union {
-		uint8 val8;
-		uint16 val16;
-		uint32 val32;
-	} bytes;
-
-	/* validate value length and buffer address */
-	ASSERT(len == 1 || (len == 2 && !((int)val & 1)) ||
-	       (len == 4 && !((int)val & 3)));
-
-	/* Select chip and page */
-	spi_goto(robo, page);
-
-	/* Enable SPI access */
-	spi_select(robo, 1);
-
-	/* Write with CID 0 */
-	cmd8 = ((6 << 4) |		/* normal SPI */
-	        1);			/* write */
-	spi_write(robo, &cmd8, 1);
-	spi_write(robo, &addr, 1);
-	switch (len) {
-	case 1:
-		bytes.val8 = *(uint8 *)val;
-		break;
-	case 2:
-		bytes.val16 = htol16(*(uint16 *)val);
-		break;
-	case 4:
-		bytes.val32 = htol32(*(uint32 *)val);
-		break;
-	}
-	spi_write(robo, (uint8 *)val, len);
-
-	ET_MSG(("%s: [0x%x-0x%x] := 0x%x (len %d)\n", __FUNCTION__, page, addr,
-	        *(uint16 *)val, len));
-	/* Disable SPI access */
-	spi_select(robo, 0);
-	return status;
-}
-
-/* Read register thru SPI in fast SPI mode */
-static int
-spi_rreg(robo_info_t *robo, uint8 page, uint8 addr, void *val, int len)
-{
-	int status = 0;
-	uint8 cmd8;
-	union {
-		uint8 val8;
-		uint16 val16;
-		uint32 val32;
-	} bytes;
-
-	/* validate value length and buffer address */
-	ASSERT(len == 1 || (len == 2 && !((int)val & 1)) ||
-	       (len == 4 && !((int)val & 3)));
-
-	/* Select chip and page */
-	spi_goto(robo, page);
-
-	/* Enable SPI access */
-	spi_select(robo, 1);
-
-	/* Fast SPI read with CID 0 and byte offset 0 */
-	cmd8 = (1 << 4);		/* fast SPI */
-	spi_write(robo, &cmd8, 1);
-	spi_write(robo, &addr, 1);
-	status = spi_read(robo, (uint8 *)&bytes, len);
-	switch (len) {
-	case 1:
-		*(uint8 *)val = bytes.val8;
-		break;
-	case 2:
-		*(uint16 *)val = ltoh16(bytes.val16);
-		break;
-	case 4:
-		*(uint32 *)val = ltoh32(bytes.val32);
-		break;
-	}
-
-	ET_MSG(("%s: [0x%x-0x%x] => 0x%x (len %d)\n", __FUNCTION__, page, addr,
-	        *(uint16 *)val, len));
-
-	/* Disable SPI access */
-	spi_select(robo, 0);
-	return status;
-}
-
-/* SPI/gpio interface functions */
-static dev_ops_t spigpio = {
-	gpio_enable,
-	gpio_disable,
-	spi_wreg,
-	spi_rreg,
-	"SPI (GPIO)"
-};
-
-
-/* Access switch registers through MII (MDC/MDIO) */
-
-#define MII_MAX_RETRY	100
-
-/* Write register thru MDC/MDIO */
-static  int
-mii_wreg(robo_info_t *robo, uint8 page, uint8 reg, void *val, int len)
-{
-	uint16 cmd16, val16,val48[3];
-	void *h = robo->h;
-    uint32 val64[2];
-	memset(val48,0,6);
-	memset(val64,0,8);
-	int i;
-	uint8 *ptr = (uint8 *)val;
-
-	/* validate value length and buffer address */
-	ASSERT(len == 1 || len == 6 || len == 8 ||
-	       ((len == 2) && !((int)val & 1)) || ((len == 4) && !((int)val & 3)));
-
-	ET_MSG(("%s: [0x%x-0x%x] := 0x%x (len %d)\n", __FUNCTION__, page, reg,
-	          *(uint16 *)val, len));
-
-	/* set page number - MII register 0x10 */
-	if (robo->page != page) {
-		cmd16 = ((page << 8) |		/* page number */
-		         1);			/* mdc/mdio access enable */
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_PAGE, cmd16);
-		robo->page = page;
-	}
-
-	switch (len) {
-	case 8:
-		val16 = ptr[7];
-		val16 = ((val16 << 8) | ptr[6]);
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA3, val16);
-		/* FALLTHRU */
-
-	case 6:
-		val16 = ptr[5];
-		val16 = ((val16 << 8) | ptr[4]);
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA2, val16);
-		val16 = ptr[3];
-		val16 = ((val16 << 8) | ptr[2]);
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA1, val16);
-		val16 = ptr[1];
-		val16 = ((val16 << 8) | ptr[0]);
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
-		break;
-
-	case 4:
-		val16 = (uint16)((*(uint32 *)val) >> 16);
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA1, val16);
-		val16 = (uint16)(*(uint32 *)val);
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
-		break;
-
-	case 2:
-		val16 = *(uint16 *)val;
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
-		break;
-
-	case 1:
-		val16 = *(uint8 *)val;
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
-		break;
-	}
-
-	/* set register address - MII register 0x11 */
-	cmd16 = ((reg << 8) |		/* register address */
-	         1);		/* opcode write */
-	robo->miiwr(h, PSEUDO_PHYAD, REG_MII_ADDR, cmd16);
-
-	/* is operation finished? */
-	for (i = MII_MAX_RETRY; i > 0; i --) {
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_ADDR);
-		if ((val16 & 3) == 0)
-			break;
-	}
-
-	/* timed out */
-	if (!i) {
-		ET_ERROR(("mii_wreg: timeout"));
-		return -1;
-	}
-	return 0;
-}
-
-/* Read register thru MDC/MDIO */
-static  int
-mii_rreg(robo_info_t *robo, uint8 page, uint8 reg, void *val, int len)
-{
-	uint16 cmd16, val16;
-	void *h = robo->h;
-	int i;
-	uint8 *ptr = (uint8 *)val;
-
-	/* validate value length and buffer address */
-	ASSERT(len == 1 || len == 6 || len == 8 ||
-	       ((len == 2) && !((int)val & 1)) || ((len == 4) && !((int)val & 3)));
-
-	/* set page number - MII register 0x10 */
-	if (robo->page != page) {
-		cmd16 = ((page << 8) |		/* page number */
-		         1);			/* mdc/mdio access enable */
-		robo->miiwr(h, PSEUDO_PHYAD, REG_MII_PAGE, cmd16);
-		robo->page = page;
-	}
-
-	/* set register address - MII register 0x11 */
-	cmd16 = ((reg << 8) |		/* register address */
-	         2);			/* opcode read */
-	robo->miiwr(h, PSEUDO_PHYAD, REG_MII_ADDR, cmd16);
-
-	/* is operation finished? */
-	for (i = MII_MAX_RETRY; i > 0; i --) {
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_ADDR);
-		if ((val16 & 3) == 0)
-			break;
-	}
-	/* timed out */
-	if (!i) {
-		ET_ERROR(("mii_rreg: timeout"));
-		return -1;
-	}
-
-	ET_MSG(("%s: [0x%x-0x%x] => 0x%x (len %d)\n", __FUNCTION__, page, reg, val16, len));
-
-	switch (len) {
-	case 8:
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA3);
-		ptr[7] = (val16 >> 8);
-		ptr[6] = (val16 & 0xff);
-		/* FALLTHRU */
-
-	case 6:
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA2);
-		ptr[5] = (val16 >> 8);
-		ptr[4] = (val16 & 0xff);
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA1);
-		ptr[3] = (val16 >> 8);
-		ptr[2] = (val16 & 0xff);
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
-		ptr[1] = (val16 >> 8);
-		ptr[0] = (val16 & 0xff);
-		break;
-
-	case 4:
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA1);
-		*(uint32 *)val = (((uint32)val16) << 16);
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
-		*(uint32 *)val |= val16;
-		break;
-
-	case 2:
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
-		*(uint16 *)val = val16;
-		break;
-	case 1:
-		val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
-		*(uint8 *)val = (uint8)(val16 & 0xff);
-		break;
-	}
-
-	return 0;
-}
-
-/* MII interface functions */
-static dev_ops_t mdcmdio = {
-	NULL,
-	NULL,
-	mii_wreg,
-	mii_rreg,
-	"MII (MDC/MDIO)"
-};
-
-/* High level switch configuration functions. */
-
-static int
-findmatch(char *string, char *name)
-{
-	uint len;
-	char *c;
-
-	len = strlen(name);
-	/* CSTYLED */
-	while ((c = strchr(string, ',')) != NULL) {
-		if (len == (uint)(c - string) && !strncmp(string, name, len))
-			return 1;
-		string = c + 1;
-	}
-
-	return (!strcmp(string, name));
-}
-
-static uint
-getgpiopin(char *vars, char *pin_name, uint def_pin)
-{
-	char name[] = "gpioXXXX";
-	char *val;
-	uint pin;
-
-	/* Go thru all possibilities till a match in pin name */
-	for (pin = 0; pin < GPIO_NUMPINS; pin ++) {
-		snprintf(name, sizeof(name), "gpio%d", pin);
-		val = getvar(vars, name);
-		if (val && findmatch(val, pin_name))
-			return pin;
-	}
-
-	if (def_pin != GPIO_PIN_NOTDEFINED) {
-		/* make sure the default pin is not used by someone else */
-		snprintf(name, sizeof(name), "gpio%d", def_pin);
-		if (getvar(vars, name)) {
-			def_pin =  GPIO_PIN_NOTDEFINED;
-		}
-	}
-
-	return def_pin;
-}
-
-
-/* Port flags */
-#define FLAG_TAGGED	't'	/* output tagged (external ports only) */
-#define FLAG_UNTAG	'u'	/* input & output untagged (CPU port only, for OS (linux, ...) */
-#define FLAG_LAN	'*'	/* input & output untagged (CPU port only, for CFE */
-
-/* port descriptor */
-typedef	struct {
-	uint32 untag;	/* untag enable bit (Page 0x05 Address 0x63-0x66 Bit[17:9]) */
-	uint32 member;	/* vlan member bit (Page 0x05 Address 0x63-0x66 Bit[7:0]) */
-	uint8 ptagr;	/* port tag register address (Page 0x34 Address 0x10-0x1F) */
-	uint8 cpu;	/* is this cpu port? */
-} pdesc_t;
-
-pdesc_t pdesc97[] = {
-	/* 5395/5397/5398 is 0 ~ 7.  port 8 is IMP port. */
-	/* port 0 */ {1 << 9, 1 << 0, REG_VLAN_PTAG0, 0},
-	/* port 1 */ {1 << 10, 1 << 1, REG_VLAN_PTAG1, 0},
-	/* port 2 */ {1 << 11, 1 << 2, REG_VLAN_PTAG2, 0},
-	/* port 3 */ {1 << 12, 1 << 3, REG_VLAN_PTAG3, 0},
-	/* port 4 */ {1 << 13, 1 << 4, REG_VLAN_PTAG4, 0},
-	/* port 5 */ {1 << 14, 1 << 5, REG_VLAN_PTAG5, 0},
-	/* port 6 */ {1 << 15, 1 << 6, REG_VLAN_PTAG6, 0},
-	/* port 7 */ {1 << 16, 1 << 7, REG_VLAN_PTAG7, 0},
-	/* mii port */ {1 << 17, 1 << 8, REG_VLAN_PTAG8, 1},
-};
-
-pdesc_t pdesc25[] = {
-	/* port 0 */ {1 << 6, 1 << 0, REG_VLAN_PTAG0, 0},
-	/* port 1 */ {1 << 7, 1 << 1, REG_VLAN_PTAG1, 0},
-	/* port 2 */ {1 << 8, 1 << 2, REG_VLAN_PTAG2, 0},
-	/* port 3 */ {1 << 9, 1 << 3, REG_VLAN_PTAG3, 0},
-	/* port 4 */ {1 << 10, 1 << 4, REG_VLAN_PTAG4, 0},
-	/* mii port */ {1 << 11, 1 << 5, REG_VLAN_PTAG5, 1},
-};
-
-
-#define to_robo(driver) ((robo_info_t *) ((switch_driver *) driver)->priv)
-#define ROBO_START(driver) \
-	do { \
-		robo_info_t *robo = to_robo(driver); \
-		if (robo->ops->enable_mgmtif) \
-			robo->ops->enable_mgmtif(robo)
-
-#define ROBO_END(driver) \
-		if (robo->ops->disable_mgmtif) \
-			robo->ops->disable_mgmtif(robo); \
-	} while (0)
-
-int
-bcm_robo_reset(robo_info_t *robo)
-{
-	int i, max_port_ind;
-	uint8 val8;
-	uint16 val16;
-	uint32 val32;
-	pdesc_t *pdesc;
-	int pdescsz;
-
-/* printk(KERN_WARNING "bcmrobo.c: bcm_robo_reset\n"); */
-
-	if (robo->ops->enable_mgmtif)
-		robo->ops->enable_mgmtif(robo);
-
-	/* setup global vlan configuration, FIXME: necessary? */
-	/* VLAN Control 0 Register (Page 0x34, Address 0) */
-	val8 = ((1 << 7) |		/* enable 802.1Q VLAN */
-	        (3 << 5));		/* individual VLAN learning mode */
-	robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
-
-	/* VLAN Control 1 Register (Page 0x34, Address 1) */
-	robo->ops->read_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
-	val8 |= ((1 << 2) |		/* enable RSV multicast V Fwdmap */
-		(1 << 3));		/* enable RSV multicast V Untagmap */
-	if (robo->devid == DEVID5325)
-		val8 |= (1 << 1);	/* enable RSV multicast V Tagging */
-	robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL1, &val8, sizeof(val8));
-
-	bcm_robo_set_macaddr(robo, NULL);
-
-	if (robo->devid == DEVID5325) {
-		/* VLAN Control 4 Register (Page 0x34, Address 4) */
-		val8 = (1 << 6);		/* drop frame with VID violation */
-		robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL4, &val8, sizeof(val8));
-
-		/* VLAN Control 5 Register (Page 0x34, Address 5) */
-		val8 = (1 << 3);		/* drop frame when miss V table */
-		robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL5, &val8, sizeof(val8));
-
-		pdesc = pdesc25;
-		pdescsz = sizeof(pdesc25) / sizeof(pdesc_t);
-	} else {
-		pdesc = pdesc97;
-		pdescsz = sizeof(pdesc97) / sizeof(pdesc_t);
-	}
-
-	if (robo->devid == DEVID5325) {
-		/* setup priority mapping - applies to tagged ingress frames */
-		/* Priority Re-map Register (Page 0x34, Address 0x20-0x23) */
-		/* FIXME: un-hardcode */
-		val32 = ((0 << 0) |	/* 0 -> 0 */
-		         (1 << 3) |	/* 1 -> 1 */
-		         (2 << 6) |	/* 2 -> 2 */
-		         (3 << 9) |	/* 3 -> 3 */
-		         (4 << 12) |	/* 4 -> 4 */
-		         (5 << 15) |	/* 5 -> 5 */
-		         (6 << 18) |	/* 6 -> 6 */
-		         (7 << 21));	/* 7 -> 7 */
-		robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_PMAP, &val32, sizeof(val32));
-	}
-
-	/* Set unmanaged mode */
-	robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
-	val8 &= (~(1 << 0));
-	robo->ops->write_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
-
-	/* No spanning tree for unmanaged mode */
-	val8 = 0;
-	max_port_ind = ((robo->devid == DEVID5398) ? REG_CTRL_PORT7 : REG_CTRL_PORT4);
-	for (i = REG_CTRL_PORT0; i <= max_port_ind; i++) {
-		robo->ops->write_reg(robo, PAGE_CTRL, i, &val8, sizeof(val8));
-	}
-
-	/* WAN port LED */
-	val16 = 0x1f;
-	robo->ops->write_reg(robo, PAGE_CTRL, 0x16, &val16, 2);
-
-	if (robo->ops->enable_mgmtif)
-		robo->ops->disable_mgmtif(robo);
-
-	return 0;
-}
-
-/* Get access to the RoboSwitch */
-robo_info_t *
-bcm_robo_attach(sb_t *sbh, void *h, char *name, char *vars, miird_f miird, miiwr_f miiwr)
-{
-	robo_info_t *robo;
-	uint32 reset, idx;
-	uint8 val8;
-	uint16 val16;
-
-	/* Allocate and init private state */
-	if (!(robo = MALLOC(sb_osh(sbh), sizeof(robo_info_t)))) {
-		ET_ERROR(("robo_attach: out of memory, malloced %d bytes", MALLOCED(sb_osh(sbh))));
-		return NULL;
-	}
-	bzero(robo, sizeof(robo_info_t));
-
-	robo->h = h;
-	robo->sbh = sbh;
-	robo->vars = vars;
-	robo->miird = miird;
-	robo->miiwr = miiwr;
-	robo->page = -1;
-	robo->name = name;
-
-	/* Trigger external reset by nvram variable existance */
-	if ((reset = getgpiopin(robo->vars, "robo_reset", GPIO_PIN_NOTDEFINED)) !=
-	    GPIO_PIN_NOTDEFINED) {
-		/*
-		 * Reset sequence: RESET low(50ms)->high(20ms)
-		 *
-		 * We have to perform a full sequence for we don't know how long
-		 * it has been from power on till now.
-		 */
-		ET_MSG(("%s: Using external reset in gpio pin %d\n", __FUNCTION__, reset));
-		reset = 1 << reset;
-
-		/* Keep RESET low for 50 ms */
-		sb_gpioout(robo->sbh, reset, 0, GPIO_DRV_PRIORITY);
-		sb_gpioouten(robo->sbh, reset, reset, GPIO_DRV_PRIORITY);
-		bcm_mdelay(50);
-
-		/* Keep RESET high for at least 20 ms */
-		sb_gpioout(robo->sbh, reset, reset, GPIO_DRV_PRIORITY);
-		bcm_mdelay(20);
-	} else {
-		/* In case we need it */
-		idx = sb_coreidx(robo->sbh);
-
-		if (sb_setcore(robo->sbh, SB_ROBO, 0)) {
-			/* If we have an internal robo core, reset it using sb_core_reset */
-			ET_MSG(("%s: Resetting internal robo core\n", __FUNCTION__));
-			sb_core_reset(robo->sbh, 0, 0);
-		}
-
-		sb_setcoreidx(robo->sbh, idx);
-	}
-
-	if (miird && miiwr) {
-		uint16 tmp;
-		int rc, retry_count = 0;
-
-		/* Read the PHY ID */
-		tmp = miird(h, PSEUDO_PHYAD, 2);
-		if (tmp != 0xffff) {
-			do {
-				rc = mii_rreg(robo, PAGE_MMR, REG_DEVICE_ID, \
-							  &robo->devid, sizeof(uint16));
-				if (rc != 0)
-					break;
-				retry_count++;
-			} while ((robo->devid == 0) && (retry_count < 10));
-
-			ET_MSG(("%s: devid read %ssuccesfully via mii: 0x%x\n", __FUNCTION__, \
-			        rc ? "un" : "", robo->devid));
-			ET_MSG(("%s: mii access to switch works\n", __FUNCTION__));
-			robo->ops = &mdcmdio;
-			if ((rc != 0) || (robo->devid == 0)) {
-				ET_MSG(("%s: error reading devid, assuming 5325e\n", __FUNCTION__));
-				robo->devid = DEVID5325;
-			}
-			ET_MSG(("%s: devid: 0x%x\n", __FUNCTION__, robo->devid));
-		}
-	}
-
-	if ((robo->devid == DEVID5395) ||
-	    (robo->devid == DEVID5397) ||
-	    (robo->devid == DEVID5398)) {
-		uint8 srst_ctrl;
-
-		/* If it is a 539x switch, use the soft reset register */
-		ET_MSG(("%s: Resetting 539x robo switch\n", __FUNCTION__));
-
-		/* Reset the 539x switch core and register file */
-		srst_ctrl = 0x83;
-		mii_wreg(robo, PAGE_CTRL, REG_CTRL_SRST, &srst_ctrl, sizeof(uint8));
-
-		bcm_mdelay(500);
-
-		srst_ctrl = 0x00;
-		mii_wreg(robo, PAGE_CTRL, REG_CTRL_SRST, &srst_ctrl, sizeof(uint8));
-	}
-
-	if (!robo->ops) {
-		int mosi, miso, ss, sck;
-
-		robo->ops = &spigpio;
-		robo->devid = DEVID5325;
-
-		/* Init GPIO mapping. Default 2, 3, 4, 5 */
-		ss = getgpiopin(vars, "robo_ss", 2);
-		if (ss == GPIO_PIN_NOTDEFINED) {
-			ET_ERROR(("robo_attach: robo_ss gpio fail: GPIO 2 in use"));
-			goto error;
-		}
-		robo->ss = 1 << ss;
-		sck = getgpiopin(vars, "robo_sck", 3);
-		if (sck == GPIO_PIN_NOTDEFINED) {
-			ET_ERROR(("robo_attach: robo_sck gpio fail: GPIO 3 in use"));
-			goto error;
-		}
-		robo->sck = 1 << sck;
-		mosi = getgpiopin(vars, "robo_mosi", 4);
-		if (mosi == GPIO_PIN_NOTDEFINED) {
-			ET_ERROR(("robo_attach: robo_mosi gpio fail: GPIO 4 in use"));
-			goto error;
-		}
-		robo->mosi = 1 << mosi;
-		miso = getgpiopin(vars, "robo_miso", 5);
-		if (miso == GPIO_PIN_NOTDEFINED) {
-			ET_ERROR(("robo_attach: robo_miso gpio fail: GPIO 5 in use"));
-			goto error;
-		}
-		robo->miso = 1 << miso;
-		ET_MSG(("%s: ss %d sck %d mosi %d miso %d\n", __FUNCTION__,
-		        ss, sck, mosi, miso));
-	}
-
-	/* sanity check */
-	ASSERT(robo->ops);
-	ASSERT(robo->ops->write_reg);
-	ASSERT(robo->ops->read_reg);
-	ASSERT((robo->devid == DEVID5325) ||
-	       (robo->devid == DEVID5395) ||
-	       (robo->devid == DEVID5397) ||
-	       (robo->devid == DEVID5398) ||
-	       (robo->devid == DEVID53115));
-
-	bcm_robo_reset(robo);
-	config_attach(robo);
-
-	return robo;
-
-error:
-	MFREE(sb_osh(robo->sbh), robo, sizeof(robo_info_t));
-	return NULL;
-}
-
-/* Release access to the RoboSwitch */
-void
-bcm_robo_detach(robo_info_t *robo)
-{
-	config_detach(robo);
-	MFREE(sb_osh(robo->sbh), robo, sizeof(robo_info_t));
-}
-
-/* Enable the device and set it to a known good state */
-int
-bcm_robo_enable_device(robo_info_t *robo)
-{
-	uint8 reg_offset, reg_val;
-	int ret = 0;
-
-	/* Enable management interface access */
-	if (robo->ops->enable_mgmtif)
-		robo->ops->enable_mgmtif(robo);
-
-	if (robo->devid == DEVID5398) {
-		/* Disable unused ports: port 6 and 7 */
-		for (reg_offset = REG_CTRL_PORT6; reg_offset <= REG_CTRL_PORT7; reg_offset ++) {
-			/* Set bits [1:0] to disable RX and TX */
-			reg_val = 0x03;
-			robo->ops->write_reg(robo, PAGE_CTRL, reg_offset, &reg_val,
-			                     sizeof(reg_val));
-		}
-	}
-
-	if (robo->devid == DEVID5325) {
-		/* Must put the switch into Reverse MII mode! */
-
-		/* MII port state override (page 0 register 14) */
-		robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MIIPO, &reg_val, sizeof(reg_val));
-
-		/* Bit 4 enables reverse MII mode */
-		if (!(reg_val & (1 << 4))) {
-			/* Enable RvMII */
-			reg_val |= (1 << 4);
-			robo->ops->write_reg(robo, PAGE_CTRL, REG_CTRL_MIIPO, &reg_val,
-			                     sizeof(reg_val));
-
-			/* Read back */
-			robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MIIPO, &reg_val,
-			                    sizeof(reg_val));
-			if (!(reg_val & (1 << 4))) {
-				ET_ERROR(("robo_enable_device: enabling RvMII mode failed\n"));
-				ret = -1;
-			}
-		}
-	}
-
-	/* Disable management interface access */
-	if (robo->ops->disable_mgmtif)
-		robo->ops->disable_mgmtif(robo);
-
-	return ret;
-}
-
-
-void bcm_robo_set_macaddr(robo_info_t *robo, char *mac_addr)
-{
-	uint8 arl_entry[8] = { 0 }, arl_entry1[8] = { 0 };
-
-	if (mac_addr != NULL)
-		memcpy(robo->macaddr, mac_addr, 6);
-
-	mac_addr = robo->macaddr;
-
-	/* setup mac address */
-	arl_entry[0] = mac_addr[5];
-	arl_entry[1] = mac_addr[4];
-	arl_entry[2] = mac_addr[3];
-	arl_entry[3] = mac_addr[2];
-	arl_entry[4] = mac_addr[1];
-	arl_entry[5] = mac_addr[0];
-
-	if (robo->devid == DEVID5325) {
-		/* Init the entry 1 of the bin */
-		robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E1, \
-				     arl_entry1, sizeof(arl_entry1));
-		robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VID_E1, \
-				     arl_entry1, 1);
-
-		/* Init the entry 0 of the bin */
-		arl_entry[6] = 0x8;		/* Port Id: MII */
-		arl_entry[7] = 0xc0;	/* Static Entry, Valid */
-
-		robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E0, \
-				     arl_entry, sizeof(arl_entry));
-		robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
-				     arl_entry, ETHER_ADDR_LEN);
-
-	} else {
-		/* Initialize the MAC Addr Index Register */
-		robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
-				     arl_entry, ETHER_ADDR_LEN);
-	}
-}
-
-static int handle_reset(void *driver, char *buf, int nr)
-{
-	ROBO_START(driver);
-	bcm_robo_reset(robo);
-	ROBO_END(driver);
-
-	return 0;
-}
-
-
-static int handle_enable_read(void *driver, char *buf, int nr)
-{
-	int ret;
-	uint8 val8;
-
-	ROBO_START(driver);
-	robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
-	ret = sprintf(buf, "%d\n", !!(val8 & (1 << 1)));
-	ROBO_END(driver);
-
-	return ret;
-}
-
-static int handle_enable_write(void *driver, char *buf, int nr)
-{
-	uint8 val8;
-
-/* printk(KERN_WARNING "bcmrobo.c: handle_enable_write\n"); */
-
-	ROBO_START(driver);
-	robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
-	val8 &= ~(1 << 1);
-	val8 |= ((buf[0] == '1') << 1);
-	robo->ops->write_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
-	ROBO_END(driver);
-
-	return 0;
-}
-
-static int handle_enable_vlan_read(void *driver, char *buf, int nr)
-{
-	uint8 val8;
-
-	ROBO_START(driver);
-	robo->ops->read_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
-	ROBO_END(driver);
-
-	return sprintf(buf, "%d\n", (((val8 & (1 << 7)) == (1 << 7)) ? 1 : 0));
-}
-static int handle_enable_vlan_write(void *driver, char *buf, int nr)
-{
-	int disable = ((buf[0] != '1') ? 1 : 0);
-
-	uint8 val8;
-	uint16 val16;
-	pdesc_t *pdesc;
-	int pdescsz;
-	uint16 vid;
-	uint8 arl_entry[8] = { 0 }, arl_entry1[8] = { 0 };
-
-/* printk(KERN_WARNING "bcmrobo.c: handle_enable_vlan_write\n"); */
-
-	ROBO_START(driver);
-
-	/* setup global vlan configuration */
-	/* VLAN Control 0 Register (Page 0x34, Address 0) */
-	val8 = disable ? 0 : 
-		((1 << 7) |		/* enable/disable 802.1Q VLAN */
-		(3 << 5));		/* individual VLAN learning mode */
-	robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
-
-	/* VLAN Control 1 Register (Page 0x34, Address 1) */
-	val8 = disable ? 0 : 
-		((1 << 2) |		/* enable/disable RSV multicast V Fwdmap */
-		(1 << 3));		/* enable/disable RSV multicast V Untagmap */
-	if (robo->devid == DEVID5325)
-		val8 |= disable ? 0 : (1 << 1);		/* enable/disable RSV multicast V Tagging */
-	robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL1, &val8, sizeof(val8));
-
-	if ( disable == 0 ) {		/* FIXME: ok to stop here when disabling? */
-		arl_entry[0] = robo->macaddr[5];
-		arl_entry[1] = robo->macaddr[4];
-		arl_entry[2] = robo->macaddr[3];
-		arl_entry[3] = robo->macaddr[2];
-		arl_entry[4] = robo->macaddr[1];
-		arl_entry[5] = robo->macaddr[0];
-
-		if (robo->devid == DEVID5325) {
-			/* Init the entry 1 of the bin */
-			robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E1, \
-					     arl_entry1, sizeof(arl_entry1));
-			robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VID_E1, \
-					     arl_entry1, 1);
-
-			/* Init the entry 0 of the bin */
-			arl_entry[6] = 0x8;		/* Port Id: MII */
-			arl_entry[7] = 0xc0;	/* Static Entry, Valid */
-
-			robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E0, \
-					     arl_entry, sizeof(arl_entry));
-			robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
-					     arl_entry, ETHER_ADDR_LEN);
-
-			/* VLAN Control 4 Register (Page 0x34, Address 4) */
-			val8 = (1 << 6);		/* drop frame with VID violation */
-			robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL4, &val8, sizeof(val8));
-
-			/* VLAN Control 5 Register (Page 0x34, Address 5) */
-			val8 = (1 << 3);		/* drop frame when miss V table */
-			robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL5, &val8, sizeof(val8));
-
-			pdesc = pdesc25;
-			pdescsz = sizeof(pdesc25) / sizeof(pdesc_t);
-		} else {
-			/* Initialize the MAC Addr Index Register */
-			robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
-					     arl_entry, ETHER_ADDR_LEN);
-
-			pdesc = pdesc97;
-			pdescsz = sizeof(pdesc97) / sizeof(pdesc_t);
-		}
-
-		/* setup each vlan. max. 16 vlans. */
-		/* force vlan id to be equal to vlan number */
-		for (vid = 0; vid < VLAN_NUMVLANS; vid ++) {
-
-			/* Add static ARL entries */
-			if (robo->devid == DEVID5325) {
-				val8 = vid;
-				robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VID_E0, \
-						     &val8, sizeof(val8));
-				robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VINDX, \
-						     &val8, sizeof(val8));
-
-				/* Write the entry */
-				val8 = 0x80;
-				robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
-						     &val8, sizeof(val8));
-				/* Wait for write to complete */
-				SPINWAIT((robo->ops->read_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
-					 &val8, sizeof(val8)), ((val8 & 0x80) != 0)),
-					 100 /* usec */);
-			} else {
-				/* Set the VLAN Id in VLAN ID Index Register */
-				val8 = vid;
-				robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VINDX, \
-						     &val8, sizeof(val8));
-
-				/* Set the MAC addr and VLAN Id in ARL Table MAC/VID Entry 0
-				 * Register.
-				 */
-				arl_entry[6] = vid;
-				arl_entry[7] = 0x0;
-				robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E0, \
-						     arl_entry, sizeof(arl_entry));
-
-				/* Set the Static bit , Valid bit and Port ID fields in
-				 * ARL Table Data Entry 0 Register
-				 */
-				val16 = 0xc008;
-				robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_DAT_E0, \
-						     &val16, sizeof(val16));
-
-				/* Clear the ARL_R/W bit and set the START/DONE bit in
-				 * the ARL Read/Write Control Register.
-				 */
-				val8 = 0x80;
-				robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
-						     &val8, sizeof(val8));
-				/* Wait for write to complete */
-				SPINWAIT((robo->ops->read_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
-					 &val8, sizeof(val8)), ((val8 & 0x80) != 0)),
-					 100 /* usec */);
-			}
-		}
-	}
-
-	ROBO_END(driver);
-	return 0;
-}
-
-static int handle_vlan_port_read(void *driver, char *buf, int nr)
-{
-	/* FIXME: yeah, some work is missing here */
-	return sprintf(buf, "bcmrobo.c: handle_vlan_port_read unimplimented\n");
-}
-
-static int handle_vlan_port_write(void *driver, char *buf, int nr)
-{
-
-	switch_driver *d = (switch_driver *) driver;
-	switch_vlan_config *c = switch_parse_vlan(d, buf);
-
-	uint8 val8;
-	uint16 val16;
-	uint32 val32;
-	int j;
-	pdesc_t *pdesc;
-	int pdescsz;
-
-/* printk(KERN_WARNING "bcmrobo.c: handle_vlan_port_write, nr %d\n", nr); */
-
-        if (c == NULL)
-                return -EINVAL;
-
-	ROBO_START(driver);
-
-	if (robo->devid == DEVID5325) {
-		pdesc = pdesc25;
-		pdescsz = sizeof(pdesc25) / sizeof(pdesc_t);
-	} else {
-		pdesc = pdesc97;
-		pdescsz = sizeof(pdesc97) / sizeof(pdesc_t);
-	}
-
-
-        for (j = 0; j < d->ports; j++) {
-                if ((c->untag | c->pvid) & (1 << j))
-			if ((j != d->cpuport) || (c->untag & (1 << j))) {
-
-				/* change default vlan tag */
-
-/* printk(KERN_WARNING "bcmrobo.c: set default vlan tag, port %d -> vlan %d\n", j, nr); */
-
-				val16 = ((0 << 13) |		/* priority - always 0 */
-					nr);			/* vlan id */
-				robo->ops->write_reg(robo, PAGE_VLAN, pdesc[j].ptagr, &val16, sizeof(val16));
-			}
-        }
-
-
-	if (robo->devid == DEVID5325) {
-		val32 = ((c->untag << 6) |		/* untag enable */
-			 c->port);			/* vlan members */
-		val32 |= ((1 << 20) |           /* valid write */
-			  ((nr >> 4) << 12));  /* vlan id bit[11:4] */
-		/* VLAN Write Register (Page 0x34, Address 0x08-0x0B) */
-		robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_WRITE, &val32,
-				     sizeof(val32));
-		/* VLAN Table Access Register (Page 0x34, Address 0x06-0x07) */
-		val16 = ((1 << 13) |    /* start command */
-			 (1 << 12) |    /* write state */
-			 nr);          /* vlan id */
-		robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_ACCESS, &val16,
-				     sizeof(val16));
-	} else {
-		uint8 vtble, vtbli, vtbla;
-		val32 = ((c->untag << 9) |		/* untag enable */
-			 c->port);			/* vlan members */
-
-		if ((robo->devid == DEVID5395) || (robo->devid == DEVID53115)) {
-			vtble = REG_VTBL_ENTRY_5395;
-			vtbli = REG_VTBL_INDX_5395;
-			vtbla = REG_VTBL_ACCESS_5395;
-		} else {
-			vtble = REG_VTBL_ENTRY;
-			vtbli = REG_VTBL_INDX;
-			vtbla = REG_VTBL_ACCESS;
-		}
-
-		/* VLAN Table Entry Register (Page 0x05, Address 0x63-0x66/0x83-0x86) */
-		robo->ops->write_reg(robo, PAGE_VTBL, vtble, &val32,
-				     sizeof(val32));
-		/* VLAN Table Address Index Reg (Page 0x05, Address 0x61-0x62/0x81-0x82) */
-		val16 = nr;        /* vlan id */
-		robo->ops->write_reg(robo, PAGE_VTBL, vtbli, &val16,
-				     sizeof(val16));
-
-		/* VLAN Table Access Register (Page 0x34, Address 0x60/0x80) */
-		val8 = ((1 << 7) |      /* start command */
-			0);             /* write */
-		robo->ops->write_reg(robo, PAGE_VTBL, vtbla, &val8,
-				     sizeof(val8));
-	}
-
-	ROBO_END(driver);
-	return 0;
-}
-
-static int __init config_attach(robo_info_t *robo)
-{
-	switch_config cfg[] = {
-		{"enable", handle_enable_read, handle_enable_write},
-		{"reset", NULL, handle_reset},
-		{"enable_vlan", handle_enable_vlan_read, handle_enable_vlan_write},
-		{NULL, NULL, NULL}
-	};
-	switch_config vlan[] = {
-		{"ports", handle_vlan_port_read, handle_vlan_port_write},
-		{NULL, NULL, NULL}
-	};
-	switch_driver driver = {
-		name: DRIVER_NAME,
-		version: DRIVER_VERSION,
-		interface: robo->name,
-		cpuport: 8,
-		ports: 9,
-		vlans: 16,
-		driver_handlers: cfg,
-		port_handlers: NULL,
-		vlan_handlers: vlan,
-	};
-	if (robo->devid == DEVID5325) {
-		driver.ports = 6;
-		driver.cpuport = 5;
-	}
-	driver.priv = (void *) robo;
-
-	return switch_register_driver(&driver);
-}
-
-static void __exit config_detach(robo_info_t *robo)
-{
-	switch_unregister_driver(DRIVER_NAME);
-}
-
-