add preliminary support for soekris boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1564 3c298f89-4303-0410-b956-a3cf2f4a3e73

14 files changed, 1695 insertions, 0 deletions

diff --git a/openwrt/target/linux/Config.in b/openwrt/target/linux/Config.in
index bd1faff02e..cb642f7e15 100644
--- a/openwrt/target/linux/Config.in
+++ b/openwrt/target/linux/Config.in
@@ -6,6 +6,7 @@ config BR2_LINUX_2_4
 config BR2_LINUX_2_4_BRCM
 	bool "Support for Broadcom based routers"
 	default y
+	depends BR2_mipsel
 	help
 	  Build firmware images for Broadcom based routers
 	  (e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G)
@@ -32,9 +33,29 @@ config BR2_LINUX_2_4_BRCM
 config BR2_LINUX_2_4_AR7
 	bool "Support for TI AR7 based devices"
 	default n
+	depends BR2_mipsel
 	help
 	  Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2)
 
+config BR2_LINUX_2_4_SOEKRIS
+	bool "Support for Soekris boards"
+	default n
+	depends BR2_i386
+	help
+	  Build firmware images for Soekris based boards
+	  (e.g. net4521, net4801)
+	  
+	config BR2_TARGET_NET4521
+		default y
+		depends BR2_LINUX_2_4_SOEKRIS
+		bool "Soekris net4521"
+
+	config BR2_TARGET_NET4801
+		default y
+		depends BR2_LINUX_2_4_SOEKRIS
+		bool "Soekris net4801"
+
+
 comment "Kernel Modules"
 
 config BR2_PACKAGE_KMOD_SANGAM_ATM
@@ -293,4 +314,21 @@ config BR2_PACKAGE_KMOD_SCHED
 	help
 	  Kernel schedulers for IP traffic
 
+
+config BR2_PACKAGE_KMOD_NATSEMI
+	tristate "Soekris net4801 ethernet driver"
+	default y
+	depends BR2_LINUX_2_4_SOEKRIS
+	help
+	  Driver for the National Semiconductor DP8381x series PCI Ethernet 
+	  found on Soekris net4801 boards
+
+config BR2_PACKAGE_KMOD_WD1100
+	tristate "Soekris net4801 watchdog"
+	default y
+	depends BR2_LINUX_2_4_SOEKRIS
+	help
+	  Driver for the NatSemi SC1x00 series Watchdog 
+	  found on Soekris net4801 boards
+
 source "target/linux/package/Config.in"
diff --git a/openwrt/target/linux/Makefile b/openwrt/target/linux/Makefile
index e1ffc79fbd..3bbe3cdab0 100644
--- a/openwrt/target/linux/Makefile
+++ b/openwrt/target/linux/Makefile
@@ -41,3 +41,4 @@ clean:
 
 $(eval $(call kernel_template,2.4,brcm,2_4_BRCM))
 $(eval $(call kernel_template,2.4,ar7,2_4_AR7))
+$(eval $(call kernel_template,2.4,soekris,2_4_SOEKRIS))
diff --git a/openwrt/target/linux/control/kmod-natsemi.control b/openwrt/target/linux/control/kmod-natsemi.control
new file mode 100644
index 0000000000..70af8ce8ab
--- /dev/null
+++ b/openwrt/target/linux/control/kmod-natsemi.control
@@ -0,0 +1,6 @@
+Package: kmod-natsemi
+Priority: optional
+Section: sys
+Maintainer: OpenWrt Developers Team <bugs@openwrt.org>
+Source: http://openwrt.org/cgi-bin/viewcvs.cgi/openwrt/target/linux/
+Description: National Semiconductor DP8381x series PCI Ethernet kernel support
diff --git a/openwrt/target/linux/control/kmod-wd1100.control b/openwrt/target/linux/control/kmod-wd1100.control
new file mode 100644
index 0000000000..d81924e8a8
--- /dev/null
+++ b/openwrt/target/linux/control/kmod-wd1100.control
@@ -0,0 +1,6 @@
+Package: kmod-wd1100
+Priority: optional
+Section: sys
+Maintainer: OpenWrt Developers Team <bugs@openwrt.org>
+Source: http://openwrt.org/cgi-bin/viewcvs.cgi/openwrt/target/linux/
+Description: NatSemi SC1x00 series Watchdog kernel support
diff --git a/openwrt/target/linux/image/Makefile b/openwrt/target/linux/image/Makefile
index 73e67a3d1c..6509952fac 100644
--- a/openwrt/target/linux/image/Makefile
+++ b/openwrt/target/linux/image/Makefile
@@ -14,6 +14,10 @@ ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_LZMA),y)
 include ./squashfs.mk
 endif
 
+ifeq ($(BR2_TARGET_ROOTFS_TGZ),y)
+include ./tgz.mk
+endif
+
 prepare:
 compile:
 install:
diff --git a/openwrt/target/linux/image/soekris/Makefile b/openwrt/target/linux/image/soekris/Makefile
new file mode 100644
index 0000000000..bfb2770ef3
--- /dev/null
+++ b/openwrt/target/linux/image/soekris/Makefile
@@ -0,0 +1,10 @@
+include $(TOPDIR)/rules.mk
+
+KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
+
+$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz: $(KDIR)/rootfs.tar.gz
+	cp $^ $@
+
+prepare:
+compile:
+install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz
diff --git a/openwrt/target/linux/linux-2.4/Makefile b/openwrt/target/linux/linux-2.4/Makefile
index 701423ce1b..0e4658c2e2 100644
--- a/openwrt/target/linux/linux-2.4/Makefile
+++ b/openwrt/target/linux/linux-2.4/Makefile
@@ -55,6 +55,10 @@ ifeq ($(BOARD),brcm)
 include ./broadcom.mk
 endif
 
+ifeq ($(BOARD),soekris)
+include ./soekris.mk
+endif
+
 ifeq ($(BOARD),ar7)
 include ./ar7.mk
 endif
diff --git a/openwrt/target/linux/linux-2.4/config/soekris b/openwrt/target/linux/linux-2.4/config/soekris
new file mode 100644
index 0000000000..62ea34eb1a
--- /dev/null
+++ b/openwrt/target/linux/linux-2.4/config/soekris
@@ -0,0 +1,1116 @@
+#
+# Automatically generated by make menuconfig: don't edit
+#
+CONFIG_X86=y
+# CONFIG_SBUS is not set
+CONFIG_UID16=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_KMOD is not set
+
+#
+# Processor type and features
+#
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MELAN is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_XADD=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_X86_L1_CACHE_SHIFT=4
+CONFIG_X86_USE_STRING_486=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_PPRO_FENCE=y
+# CONFIG_X86_F00F_WORKS_OK is not set
+CONFIG_X86_MCE=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_CPUID is not set
+# CONFIG_EDD is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_MTRR is not set
+# CONFIG_SMP is not set
+# CONFIG_X86_UP_APIC is not set
+# CONFIG_X86_UP_IOAPIC is not set
+# CONFIG_X86_TSC_DISABLE is not set
+
+#
+# General setup
+#
+CONFIG_NET=y
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_ISA=y
+# CONFIG_PCI_NAMES is not set
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_HOTPLUG=y
+
+#
+# PCMCIA/CardBus support
+#
+CONFIG_PCMCIA=m
+CONFIG_CARDBUS=y
+# CONFIG_TCIC is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
+# CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_ELF_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_OOM_KILLER is not set
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# ACPI Support
+#
+# CONFIG_ACPI is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play configuration
+#
+CONFIG_PNP=m
+CONFIG_ISAPNP=m
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+# CONFIG_CISS_MONITOR_THREAD is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_STATS is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_NETLINK_DEV=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_FILTER is not set
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_NAT=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_TOS=y
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+
+#
+#   IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_FTP=y
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_IRC=y
+CONFIG_IP_NF_CT_PROTO_GRE=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=y
+CONFIG_IP_NF_MATCH_MULTIPORT=y
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_IPP2P=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=y
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=y
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_UNCLEAN=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_LAYER7=m
+# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
+CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_MIRROR=m
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_PROTO_GRE=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=y
+CONFIG_IP_NF_NAT_FTP=y
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=y
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+#   IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+
+#
+#   IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+# CONFIG_KHTTPD is not set
+
+#
+#    SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+CONFIG_BRIDGE=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_CSZ=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+# CONFIG_PHONE_IXJ_PCMCIA is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+CONFIG_IDE=y
+
+#
+# IDE, ATA and ATAPI Block devices
+#
+CONFIG_BLK_DEV_IDE=y
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_IDEDISK_STROKE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_BLK_DEV_GENERIC is not set
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_BLK_DEV_OFFBOARD=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_PCI_WIP is not set
+# CONFIG_BLK_DEV_ADMA100 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_WDC_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_AMD74XX_OVERRIDE is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_HPT34X_AUTODMA is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_PDC202XX_BURST is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+CONFIG_BLK_DEV_SC1200=y
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_IDEDMA_AUTO=y
+CONFIG_IDEDMA_IVB=y
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_ATARAID is not set
+# CONFIG_BLK_DEV_ATARAID_PDC is not set
+# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
+# CONFIG_BLK_DEV_ATARAID_SII is not set
+
+#
+# SCSI support
+#
+CONFIG_SCSI=m
+CONFIG_BLK_DEV_SD=m
+CONFIG_SD_EXTRA_DEVS=5
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_SCSI_DEBUG_QUEUES is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AHA1740 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_MEGARAID2 is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_DMA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NCR53C7xx is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_NCR53C8XX is not set
+# CONFIG_SCSI_SYM53C8XX is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PCI2000 is not set
+# CONFIG_SCSI_PCI2220I is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SIM710 is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_SCSI_PCMCIA is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
+#
+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_PCI is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+CONFIG_NET_RANDOM=y
+# CONFIG_ETHERTAP is not set
+# CONFIG_NET_SB1000 is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_SUNLANCE is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_TULIP is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_DGRS is not set
+# CONFIG_DM9102 is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPRO100_PIO is not set
+# CONFIG_E100 is not set
+# CONFIG_LNE390 is not set
+# CONFIG_FEALNX is not set
+CONFIG_NATSEMI=m
+# CONFIG_NE2K_PCI is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_NE3210 is not set
+# CONFIG_ES3210 is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNDANCE_MMIO is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE_MPPC=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_STRIP is not set
+# CONFIG_WAVELAN is not set
+# CONFIG_ARLAN is not set
+# CONFIG_AIRONET4500 is not set
+# CONFIG_AIRONET4500_NONCS is not set
+# CONFIG_AIRONET4500_PROC is not set
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PRISM54 is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+CONFIG_SHAPER=m
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_ARCNET_COM20020_CS is not set
+# CONFIG_PCMCIA_IBMTR is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCMCIA_XIRTULIP is not set
+# CONFIG_NET_PCMCIA_RADIO is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Input core support
+#
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL=y
+CONFIG_SERIAL_CONSOLE=y
+# CONFIG_SERIAL_EXTENDED is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=128
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_GAMEPORT is not set
+# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPMI_PANIC_EVENT is not set
+# CONFIG_IPMI_DEVICE_INTERFACE is not set
+# CONFIG_IPMI_KCS is not set
+# CONFIG_IPMI_WATCHDOG is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_I810_TCO is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_60XX_WDT is not set
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_W83877F_WDT is not set
+# CONFIG_WDT is not set
+# CONFIG_WDTPCI is not set
+# CONFIG_MACHZ_WDT is not set
+CONFIG_WD1100=m
+CONFIG_SCx200=m
+CONFIG_SCx200_GPIO=m
+# CONFIG_AMD_RNG is not set
+# CONFIG_INTEL_RNG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_AMD_PM768 is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+
+#
+# Direct Rendering Manager (XFree86 DRI support)
+#
+# CONFIG_DRM is not set
+# CONFIG_MWAVE is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_PCMCIA_SERIAL_CS is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_MWAVE is not set
+# CONFIG_OBMOUSE is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_QFMT_V2 is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BEFS_DEBUG is not set
+# CONFIG_BFS_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+# CONFIG_UMSDOS_FS is not set
+CONFIG_VFAT_FS=m
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_JFFS2_BBC_ARMLIB is not set
+# CONFIG_JFFS2_BBC_LZO is not set
+# CONFIG_JFFS2_BBC_LZARI is not set
+# CONFIG_JFFS2_BBC_LZHD is not set
+# CONFIG_JFFS2_BBC_LZSS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_TMPFS=y
+CONFIG_RAMFS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_TRACE is not set
+# CONFIG_XFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_SUNRPC=m
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SMB_NLS is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_UHCI is not set
+CONFIG_USB_UHCI_ALT=m
+CONFIG_USB_OHCI=m
+# CONFIG_USB_SL811HS_ALT is not set
+# CONFIG_USB_SL811HS is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_MIDI is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_HP8200e=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HIDINPUT is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_DC2XX is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_SCANNER is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CDCETHER is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USS720 is not set
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_BRLVGER is not set
+# CONFIG_USB_LCD is not set
+
+#
+# Support for USB gadgets
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Bluetooth support
+#
+CONFIG_BLUEZ=m
+CONFIG_BLUEZ_L2CAP=m
+CONFIG_BLUEZ_SCO=m
+CONFIG_BLUEZ_RFCOMM=m
+CONFIG_BLUEZ_RFCOMM_TTY=y
+CONFIG_BLUEZ_BNEP=m
+CONFIG_BLUEZ_BNEP_MC_FILTER=y
+CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BLUEZ_HCIUSB=m
+CONFIG_BLUEZ_HCIUSB_SCO=y
+CONFIG_BLUEZ_HCIUART=m
+CONFIG_BLUEZ_HCIUART_H4=y
+CONFIG_BLUEZ_HCIUART_BCSP=y
+CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
+# CONFIG_BLUEZ_HCIBFUSB is not set
+# CONFIG_BLUEZ_HCIDTL1 is not set
+# CONFIG_BLUEZ_HCIBT3C is not set
+# CONFIG_BLUEZ_HCIBLUECARD is not set
+# CONFIG_BLUEZ_HCIBTUART is not set
+# CONFIG_BLUEZ_HCIVHCI is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=0
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_FW_LOADER is not set
diff --git a/openwrt/target/linux/linux-2.4/config/soekris.modules b/openwrt/target/linux/linux-2.4/config/soekris.modules
new file mode 100644
index 0000000000..ff58681ad5
--- /dev/null
+++ b/openwrt/target/linux/linux-2.4/config/soekris.modules
@@ -0,0 +1,2 @@
+natsemi
+wd1100
diff --git a/openwrt/target/linux/linux-2.4/patches/soekris/001-mgeode-cpu.patch b/openwrt/target/linux/linux-2.4/patches/soekris/001-mgeode-cpu.patch
new file mode 100644
index 0000000000..662d4f263e
--- /dev/null
+++ b/openwrt/target/linux/linux-2.4/patches/soekris/001-mgeode-cpu.patch
@@ -0,0 +1,40 @@
+diff -Nur linux-2.4.29/arch/i386/Makefile linux-2.4.29_geode/arch/i386/Makefile
+--- linux-2.4.29/arch/i386/Makefile	Wed Nov 17 12:54:21 2004
++++ linux-2.4.29_geode/arch/i386/Makefile	Tue Feb 15 23:41:54 2005
+@@ -94,6 +94,10 @@
+ CFLAGS += $(call check_gcc,-march=c3-2,-march=i686)
+ endif
+ 
++ifdef CONFIG_MGEODE
++CFLAGS += -march=i586
++endif
++
+ # Disable unit-at-a-time mode, it makes gcc use a lot more stack
+ # due to the lack of sharing of stacklots.
+ CFLAGS += $(call check_gcc,-fno-unit-at-a-time,)
+diff -Nur linux-2.4.29/arch/i386/config.in linux-2.4.29_geode/arch/i386/config.in
+--- linux-2.4.29/arch/i386/config.in	Wed Nov 17 12:54:21 2004
++++ linux-2.4.29_geode/arch/i386/config.in	Tue Feb 15 23:41:54 2005
+@@ -42,6 +42,7 @@
+ 	 Winchip-C6				CONFIG_MWINCHIPC6 \
+ 	 Winchip-2				CONFIG_MWINCHIP2 \
+ 	 Winchip-2A/Winchip-3			CONFIG_MWINCHIP3D \
++	 MediaGX/Geode                          CONFIG_MGEODE \
+ 	 CyrixIII/VIA-C3			CONFIG_MCYRIXIII \
+ 	 VIA-C3-2				CONFIG_MVIAC3_2" Pentium-Pro
+ #
+@@ -162,6 +163,14 @@
+    define_bool CONFIG_X86_ALIGNMENT_16 y
+    define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
+    define_bool CONFIG_X86_F00F_WORKS_OK y
++fi
++if [ "$CONFIG_MGEODE" = "y" ]; then
++   define_int  CONFIG_X86_L1_CACHE_SHIFT 5
++   define_bool CONFIG_X86_USE_STRING_486 y
++   define_bool CONFIG_X86_ALIGNMENT_16 y
++   define_bool CONFIG_X86_TSC y
++   define_bool CONFIG_X86_PPRO_FENCE y
++   define_bool CONFIG_X86_OOSTORE y
+ fi
+ if [ "$CONFIG_MCRUSOE" = "y" ]; then
+    define_int  CONFIG_X86_L1_CACHE_SHIFT 5
diff --git a/openwrt/target/linux/linux-2.4/patches/soekris/002-wd1100.patch b/openwrt/target/linux/linux-2.4/patches/soekris/002-wd1100.patch
new file mode 100644
index 0000000000..8cb2dbd04b
--- /dev/null
+++ b/openwrt/target/linux/linux-2.4/patches/soekris/002-wd1100.patch
@@ -0,0 +1,417 @@
+diff -Nur linux-2.4.29/drivers/char/Config.in linux-2.4.29_geode/drivers/char/Config.in
+--- linux-2.4.29/drivers/char/Config.in	Sun Aug  8 01:26:04 2004
++++ linux-2.4.29_geode/drivers/char/Config.in	Tue Feb 15 23:41:54 2005
+@@ -270,6 +270,7 @@
+       fi
+    fi
+    tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDT
++   tristate '  Embedded NatSemi SC1x00 Watchdog' CONFIG_WD1100
+    if [ "$CONFIG_SGI_IP22" = "y" ]; then
+       dep_tristate '  Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
+    fi
+diff -Nur linux-2.4.29/drivers/char/Makefile linux-2.4.29_geode/drivers/char/Makefile
+--- linux-2.4.29/drivers/char/Makefile	Sun Aug  8 01:26:04 2004
++++ linux-2.4.29_geode/drivers/char/Makefile	Tue Feb 15 23:41:54 2005
+@@ -302,6 +302,7 @@
+ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+ obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+ obj-$(CONFIG_IB700_WDT) += ib700wdt.o
++obj-$(CONFIG_WD1100) += wd1100.o
+ obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
+ obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
+ obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
+diff -Nur linux-2.4.29/drivers/char/wd1100.c linux-2.4.29_geode/drivers/char/wd1100.c
+--- linux-2.4.29/drivers/char/wd1100.c	Thu Jan  1 01:00:00 1970
++++ linux-2.4.29_geode/drivers/char/wd1100.c	Tue Feb 15 23:41:54 2005
+@@ -0,0 +1,391 @@
++/*
++ *   National Semiconductor SC1x00 CPU watchdog driver
++ *   Copyright (c) Inprimis Technologies 2002
++ *
++ *   by Mark Grosberg <markg@inprimis.com>
++ *   and Rolando Goldman <rolandog@inprimis.com>
++ *
++ *   Minor changes by Kianusch Sayah Karadji <kianusch@sk-tech.net>
++ *   ( Soekris net4801 Support, module-parameter )
++ *
++ *   This program is free software; you can redistribute it and/or
++ *   modify it under the terms of the GNU General Public License
++ *   as published by the Free Software Foundation; either version
++ *   2 of the License, or (at your option) any later version.
++ *   
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/fs.h>
++#include <linux/mm.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/spinlock.h>
++#include <linux/sysctl.h>
++#include <linux/pci.h>
++
++/* 
++ * Since the SC1100 is an x86 clone, we don't even bother with 
++ * allowing other architectures to compile us.
++ */
++#ifndef CONFIG_X86
++# error Sorry this driver is only for x86.
++#endif
++
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/processor.h>
++
++/* #define DEBUG_WD1100 */
++
++static int proc_wd_timeout(ctl_table   *ctl, 
++                           int          write,
++                           struct file *file,
++                           void        *buffer,
++                           size_t      *lenp);
++static int proc_wd_graceful(ctl_table   *ctl, 
++                            int          write,
++                            struct file *file,
++                            void        *buffer,
++                            size_t      *lenp);
++                           
++/* Register definitions */
++
++#define SC1100_F5_VENDOR_ID  0x100B
++#define SC1100_F5_DEVICE_ID  0x0515   
++
++#define CPU_WDTO_REG    0x00 /* watchdog time out, 16 bit register */
++#define CPU_WDCNFG_REG  0x02 /* watchdog config , 16 bit register */
++#define CPU_WDSTS_REG   0x04 /* watchdog status , 8 bit register */
++
++/* Default timeout: 4 seconds (changeable via sysctl) */
++static unsigned int    sysctl_wd_timeout  = 0;
++static unsigned int    sysctl_wd_graceful = 0;
++
++static unsigned int    timeout  = 4;
++static unsigned int    graceful = 1;
++
++MODULE_PARM (timeout,  "i");
++MODULE_PARM (graceful, "i");
++
++static int             in_use    = 0;
++static unsigned short  cpu_base;
++static spinlock_t      wd_lock;
++
++/**************************************************************************/
++
++/* XXX To-do: DEV_WATCHDOG must be in include/linux/sysctl.h */
++enum
++{ DEV_WATCHDOG = 6 };
++
++enum
++{
++   DEV_WD_TIMEOUT   = 1,
++   DEV_WD_GRACEFUL  = 2
++};
++
++static struct ctl_table_header *wd_table_header;
++
++static ctl_table wd_table[] = {
++   {
++    DEV_WD_TIMEOUT, "timeout",
++    &sysctl_wd_timeout, sizeof(int), 0644, NULL, &proc_wd_timeout
++   },
++   
++   {
++    DEV_WD_GRACEFUL, "graceful",
++    &sysctl_wd_graceful, sizeof(int), 0644, NULL, &proc_wd_graceful
++   },
++
++   {0}
++};
++
++static ctl_table wd_dir_table[] = {
++   {DEV_WATCHDOG, "wd", NULL, 0, 0555, wd_table},
++   {0}
++};
++
++static ctl_table wd_root_table[] = {
++   {CTL_DEV, "dev", NULL, 0, 0555, wd_dir_table},
++   {0}
++};
++
++static int proc_wd_timeout(ctl_table   *ctl, 
++                           int          write,
++                           struct file *file,
++                           void        *buffer,
++                           size_t      *lenp)
++{
++  int   rc;
++  
++  rc = proc_dointvec(ctl, write, file, buffer, lenp);
++  if (write && (rc == 0))
++  {
++     /* Clamp to limits. */
++     if (sysctl_wd_timeout < 1) 
++       sysctl_wd_timeout = 1;
++     else if (sysctl_wd_timeout > 65535)
++       sysctl_wd_timeout = 65535;
++  }
++  
++  return (rc);
++}
++
++static int proc_wd_graceful(ctl_table   *ctl, 
++                            int          write,
++                            struct file *file,
++                            void        *buffer,
++                            size_t      *lenp)
++{
++  int   rc;
++  
++  rc = proc_dointvec(ctl, write, file, buffer, lenp);
++  if (write && (rc == 0))
++  {
++     /* Clamp to true/false. */
++     if (sysctl_wd_graceful) 
++       sysctl_wd_graceful = 1;
++  }
++  
++  return (rc);
++}                           
++
++/**************************************************************************/
++
++static __inline__ void reset_wd(void)
++{
++  outw(sysctl_wd_timeout * 8, cpu_base + CPU_WDTO_REG);
++}
++
++static int reboot_reason(void)
++{
++   static int    result;
++   static int    fetched = 0;
++ 
++   if (!fetched)
++   {
++     unsigned char sr;
++     
++     sr = inb(cpu_base + CPU_WDSTS_REG);
++     outb(sr | 1, cpu_base + CPU_WDSTS_REG);
++   
++     fetched = 1;
++   }
++   
++   return (result);
++}
++
++static struct watchdog_info wd_info =
++{
++   0,   /* Options          */
++   0,   /* Firmware version */
++   "NSC SC1x00 WD"
++};
++
++static int wd_ioctl(struct inode *inode, 
++                    struct file  *file, 
++                    unsigned int  cmd,
++                    unsigned long arg)
++{
++   int  i;
++   
++   switch (cmd)
++   {
++      default:
++        return (-ENOTTY);
++        
++      case WDIOC_GETSUPPORT:
++        i = verify_area(VERIFY_WRITE, (void *)arg, sizeof(struct watchdog_info));
++        if (i)
++          return (i);
++        else
++          return copy_to_user((struct watchdog_info *)arg, 
++                              &wd_info, 
++                              sizeof(wd_info));
++        break;
++        
++      case WDIOC_KEEPALIVE:
++        reset_wd();
++        return (0);
++        
++      case WDIOC_GETBOOTSTATUS:
++        i = reboot_reason();
++        return (put_user(i, (int *)arg));
++        
++      case WDIOC_GETSTATUS:
++        i = inw(cpu_base + CPU_WDTO_REG) / 8;
++        return (put_user(i, (int *)arg));
++   }       
++}                    
++
++static int wd_open(struct inode *inode, 
++                   struct file  *file)
++{
++  spin_lock(&wd_lock);
++  if (in_use)
++  {
++    spin_unlock(&wd_lock);
++    return (-EBUSY);
++  }
++  else
++    in_use++;
++    
++  spin_unlock(&wd_lock);
++
++  MOD_INC_USE_COUNT;
++
++  /*
++   * Configure the chip to do a reset if the timer goes to 0.
++   * Set the clock divisor to 4096.
++   */
++     
++  outw(0xfc, cpu_base + CPU_WDCNFG_REG);
++  
++  /* Start the watchdog: It won't run until we write the TO reg. */
++  reset_wd();
++
++  return (0);
++}
++
++static int wd_release(struct inode *inode,
++                       struct file  *file)
++{
++  spin_lock(&wd_lock);
++    
++  in_use = 0;
++  
++  /*
++   * If graceful shutdown is not set, then don't bother to stop the
++   * watchdog timer. This handles the scenario where the user process
++   * that is poking the watchdog gets terminated due to some error
++   * (say a SEGV or some VM condition). 
++   *
++   * In that case, the kernel would happily close the descriptor for
++   * us and leave us in a state where we aren't watching the dog...
++   *
++   * To work around this, the "graceful" sysctl prevents reset of the
++   * watchdog on close.
++   */
++  if (sysctl_wd_graceful)
++    outw(0, cpu_base + CPU_WDCNFG_REG);
++  
++  spin_unlock(&wd_lock);
++  MOD_DEC_USE_COUNT;
++  
++  return (0);
++}           
++
++static ssize_t wd_write(struct file *file,
++                        const char  *data,
++                        size_t       len,
++                        loff_t      *ppos)
++{
++  /* Device is non-seekable. */
++  if (ppos != &file->f_pos)
++    return (-ESPIPE);
++  
++  if (len > 0)
++    reset_wd();   
++  
++  return (len);
++}
++
++static struct file_operations wd_fops=
++{
++   owner:      THIS_MODULE,
++   write:      wd_write,
++   ioctl:      wd_ioctl,
++   open:       wd_open,
++   release:    wd_release,
++};
++ 
++static struct miscdevice sc1x00wd_miscdev=
++{
++   WATCHDOG_MINOR,
++   "watchdog",
++   &wd_fops
++};
++
++static int __init wd_init(void)
++{
++   int              ret;
++   struct pci_dev  *dev;
++   unsigned int     cw;
++
++   if (timeout < 1)
++      timeout = 1;
++   else if (timeout > 65535)
++      timeout = 65535;
++
++   if (graceful != 0)
++      graceful = 1;
++
++   sysctl_wd_timeout=timeout;
++   sysctl_wd_graceful=graceful;
++
++   if ((strcmp(boot_cpu_data.x86_vendor_id, "Geode by NSC") != 0)
++   ||  ((boot_cpu_data.x86_model  != 4) && boot_cpu_data.x86_model  != 9))
++   {
++      printk(KERN_WARNING "wd1100.c: This is not an SC1100 processor!\n");
++      return (0);
++   }
++
++   /* get the CONFIG BLOCK ADDRESS from scratch pad register */ 
++   dev = pci_find_device(SC1100_F5_VENDOR_ID,SC1100_F5_DEVICE_ID,0);
++   if (dev == NULL)
++   {
++     printk(KERN_ERR "wd1100.c: Can not find bridge device.\n");
++     return (0);
++   }
++
++   pci_read_config_dword(dev, 0x64, &cw);
++   cpu_base = (unsigned short )cw;
++  
++#ifdef DEBUG_WD1100
++   printk("wd1100.c: CPU base = 0x%X\n", (unsigned int )cpu_base);
++#endif
++
++   printk(KERN_INFO "SC1x00 Watchdog driver by Inprimis Technolgies.\n");
++   /*
++    * We must call reboot_reason() to reset the flag in the WD.
++    *
++    * Even though it is available as an ioctl(), we call it during
++    * module initialization to perform the clear. You can take out
++    * the printk(), but don't take out the call to reboot_reason().
++    */
++   if (reboot_reason())
++      printk(KERN_INFO "Last reboot was by watchdog!\n");
++    
++   spin_lock_init(&wd_lock);
++        
++   ret = misc_register(&sc1x00wd_miscdev);
++   if (ret)
++     printk(KERN_ERR "wd1100.c: Can't register device.\n");
++   else
++   {
++     wd_table_header = register_sysctl_table(wd_root_table, 1); 
++      if (wd_table_header == NULL)
++        printk(KERN_ERR "wd1100.c: Can't register sysctl.\n");
++   }
++
++   return 0;
++}   
++
++static void __exit wd_exit(void)
++{
++   if (wd_table_header != NULL)
++      unregister_sysctl_table(wd_table_header);
++   
++   misc_deregister(&sc1x00wd_miscdev);
++}
++
++EXPORT_NO_SYMBOLS; 
++
++module_init(wd_init);
++module_exit(wd_exit);
++
++MODULE_LICENSE("GPL");
++
diff --git a/openwrt/target/linux/linux-2.4/patches/soekris/003-mgeode-pci.patch b/openwrt/target/linux/linux-2.4/patches/soekris/003-mgeode-pci.patch
new file mode 100644
index 0000000000..eb6594ec84
--- /dev/null
+++ b/openwrt/target/linux/linux-2.4/patches/soekris/003-mgeode-pci.patch
@@ -0,0 +1,14 @@
+diff -Nur linux-2.4.29/drivers/pci/pci.c linux-2.4.29_geode/drivers/pci/pci.c
+--- linux-2.4.29/drivers/pci/pci.c	Wed Nov 17 12:54:21 2004
++++ linux-2.4.29_geode/drivers/pci/pci.c	Tue Feb 15 23:41:54 2005
+@@ -1486,6 +1486,10 @@
+ 	for (func = 0; func < 8; func++, temp->devfn++) {
+ 		if (pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type))
+ 			continue;
++#ifdef CONFIG_MGEODE
++		if (hdr_type & 0x7f > PCI_HEADER_TYPE_CARDBUS)
++			continue;
++#endif
+ 		temp->hdr_type = hdr_type & 0x7f;
+ 
+ 		dev = pci_scan_device(temp);
diff --git a/openwrt/target/linux/linux-2.4/soekris.mk b/openwrt/target/linux/linux-2.4/soekris.mk
new file mode 100644
index 0000000000..4fa8fff8cf
--- /dev/null
+++ b/openwrt/target/linux/linux-2.4/soekris.mk
@@ -0,0 +1,11 @@
+# $Id$
+
+# soekris specific kmod packages
+
+$(eval $(call KMOD_template,NATSEMI,natsemi,\
+	$(MODULES_DIR)/kernel/drivers/net/natsemi.o \
+,CONFIG_NATSEMI))
+$(eval $(call KMOD_template,WD1100,wd1100,\
+	$(MODULES_DIR)/kernel/drivers/char/wd1100.o \
+,CONFIG_WD1100))
+
diff --git a/openwrt/target/linux/package/openwrt/files/network.overrides.soekris b/openwrt/target/linux/package/openwrt/files/network.overrides.soekris
new file mode 100644
index 0000000000..e857d5b5f1
--- /dev/null
+++ b/openwrt/target/linux/package/openwrt/files/network.overrides.soekris
@@ -0,0 +1,26 @@
+# NVRAM overrides
+#
+# This file handles the NVRAM quirks of various hardware.
+# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
+
+# Load sysconf defaults
+[ -f /etc/sysconf ] && . /etc/sysconf
+
+DEFAULT_lan_proto="static"
+DEFAULT_lan_ifname="br0"
+DEFAULT_lan_ifnames="eth0"
+DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
+DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
+DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
+
+# failsafe if reset is held
+[ "$FAILSAFE" = "true" ] && {
+  echo "### YOU ARE IN FAILSAFE MODE ####"
+  lan_ifname=${DEFAULT_lan_proto}
+  lan_ifnames=${FAILSAFE_ifnames:-${DEFAULT_lan_ifnames}}
+  lan_ipaddr=$DEFAULT_lan_ipaddr
+  lan_netmask=$DEFAULT_lan_netmask
+  lan_hwaddr=$DEFAULT_lan_hwaddr
+  wan_ifname="none"
+  wifi_ifname="none"
+}