move diag module outside of kernel directory

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1968 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 288 deletions

diff --git a/openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch b/openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch
deleted file mode 100644
index a0f36e669c..0000000000
--- a/openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch
+++ /dev/null
@@ -1,288 +0,0 @@
-diff -Nur linux-2.6.12.5/drivers/net/Kconfig linux-2.6.12.5-diag/drivers/net/Kconfig
---- linux-2.6.12.5/drivers/net/Kconfig	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-diag/drivers/net/Kconfig	2005-09-10 23:08:53.209908656 +0200
-@@ -41,6 +41,11 @@
- 	  Instead of 'dummy', the devices will then be called 'dummy0',
- 	  'dummy1' etc.
- 
-+config DIAG_LED
-+	tristate "Led driver for Broadcom BCM97xx"
-+	---help---
-+	  Say m if you like the led to signal status of operation.
-+
- config BONDING
- 	tristate "Bonding driver support"
- 	depends on NETDEVICES
-diff -Nur linux-2.6.12.5/drivers/net/Makefile linux-2.6.12.5-diag/drivers/net/Makefile
---- linux-2.6.12.5/drivers/net/Makefile	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-diag/drivers/net/Makefile	2005-09-08 17:49:02.249278160 +0200
-@@ -1,6 +1,7 @@
- #
- # Makefile for the Linux network (ethercard) device drivers.
- #
-+obj-$(CONFIG_DIAG_LED) += diag/
- 
- ifeq ($(CONFIG_ISDN_PPP),y)
-   obj-$(CONFIG_ISDN) += slhc.o
-diff -Nur linux-2.6.12.5/drivers/net/diag/Makefile linux-2.6.12.5-diag/drivers/net/diag/Makefile
---- linux-2.6.12.5/drivers/net/diag/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-diag/drivers/net/diag/Makefile	2005-09-10 19:45:26.596290216 +0200
-@@ -0,0 +1,5 @@
-+#$Id$
-+
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
-+
-+obj-$(CONFIG_DIAG_LED) += diag.o
-diff -Nur linux-2.6.12.5/drivers/net/diag/diag.c linux-2.6.12.5-diag/drivers/net/diag/diag.c
---- linux-2.6.12.5/drivers/net/diag/diag.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-diag/drivers/net/diag/diag.c	2005-09-10 18:51:02.727849016 +0200
-@@ -0,0 +1,249 @@
-+/*
-+ * diag_led.c - replacement diag module
-+ *
-+ * Copyright (C) 2004 Mike Baker,
-+ *                    Imre Kaloz <kaloz@dune.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ *
-+ * $Id$
-+ */
-+
-+/*
-+ * ChangeLog:
-+ * 2004/03/28 initial release 
-+ * 2004/08/26 asus & buffalo support added
-+ * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
-+ * 2005/04/13 added licensing informations
-+ * 2005/04/18 base reset polarity off initial readings
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/sysctl.h>
-+#include <asm/io.h>
-+#include <typedefs.h>
-+#include <bcmdevs.h>
-+#include <sbutils.h>
-+
-+extern char * nvram_get(const char *name);
-+static void *sbh;
-+
-+// v2.x - - - - -
-+#define DIAG_GPIO (1<<1)
-+#define DMZ_GPIO  (1<<7)
-+
-+/*
-+static void set_gpio(uint32 mask, uint32 value) {
-+	sb_gpiocontrol(sbh,mask,0);
-+	sb_gpioouten(sbh,mask,mask);
-+	sb_gpioout(sbh,mask,value);
-+}
-+
-+static void v2_set_diag(u8 state) {
-+	set_gpio(DIAG_GPIO,state);
-+}
-+static void v2_set_dmz(u8 state) {
-+	set_gpio(DMZ_GPIO,state);
-+}
-+*/
-+
-+/*
-+// v1.x - - - - -
-+#define LED_DIAG   0x13
-+#define LED_DMZ    0x12
-+
-+static void v1_set_diag(u8 state) {
-+	if (!state) {
-+		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
-+	} else {
-+		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
-+	}
-+}
-+static void v1_set_dmz(u8 state) {
-+	if (!state) {
-+		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
-+	} else {
-+		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
-+	}
-+}
-+*/
-+
-+// - - - - -
-+static void ignore(u8 ignored) {};
-+
-+// - - - - -
-+#define BIT_DMZ         0x01
-+#define BIT_DIAG        0x04
-+
-+void (*set_diag)(u8 state);
-+void (*set_dmz)(u8 state);
-+
-+static unsigned int diag = 0;
-+
-+static void diag_change()
-+{
-+	set_diag(0xFF); // off
-+	set_dmz(0xFF); // off
-+
-+	if(diag & BIT_DIAG)
-+		set_diag(0x00); // on
-+	if(diag & BIT_DMZ)
-+		set_dmz(0x00); // on
-+}
-+
-+static int proc_diag(ctl_table *table, int write, struct file *filp,
-+		void *buffer, size_t *lenp, loff_t *ppos)
-+{
-+	int r;
-+	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
-+	if (write && !r) {
-+		diag_change();
-+	}
-+	return r;
-+}
-+
-+// - - - - -
-+static unsigned char reset_gpio = 0;
-+static unsigned char reset_polarity = 0;
-+static unsigned int reset = 0;
-+
-+static int proc_reset(ctl_table *table, int write, struct file *filp,
-+		void *buffer, size_t *lenp, loff_t *ppos)
-+{
-+
-+	if (reset_gpio) {
-+		sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
-+		sb_gpioouten(sbh,reset_gpio,0);
-+		reset=!(sb_gpioin(sbh)&reset_gpio);
-+
-+		if (reset_polarity) reset=!reset;
-+	} else {
-+		reset=0;
-+	}
-+
-+	return proc_dointvec(table, write, filp, buffer, lenp, ppos);
-+}
-+
-+// - - - - -
-+static struct ctl_table_header *diag_sysctl_header;
-+
-+static ctl_table sys_diag[] = {
-+         { 
-+	   ctl_name: 2000,
-+	   procname: "diag", 
-+	   data: &diag,
-+	   maxlen: sizeof(diag), 
-+	   mode: 0644,
-+	   proc_handler: proc_diag
-+	 },
-+	 {
-+	   ctl_name: 2001,
-+	   procname: "reset",
-+	   data: &reset,
-+	   maxlen: sizeof(reset),
-+	   mode: 0444,
-+	   proc_handler: proc_reset 
-+	 },
-+         { 0 }
-+};
-+
-+static int __init diag_init()
-+{
-+	//char *buf;
-+	u32 board_type;
-+	sbh = sb_kattach();
-+	sb_gpiosetcore(sbh);
-+
-+	board_type = sb_boardtype(sbh);
-+	printk(KERN_INFO "diag boardtype: %08x\n",board_type);
-+
-+	set_diag=ignore;
-+	set_dmz=ignore;
-+	
-+	/*
-+	buf=nvram_get("boardrev");
-+	if (((board_type & 0xf00) == 0x400) && strcmp(buf,"0x10")) {
-+		buf=nvram_get("boardtype")?:"";
-+		if (!strcmp(buf,"bcm94710dev")) {
-+			buf=nvram_get("boardnum")?:"";
-+			if (!strcmp(buf,"42")) {
-+				// wrt54g v1.x
-+				set_diag=v1_set_diag;
-+				set_dmz=v1_set_dmz;
-+				reset_gpio=(1<<6);
-+			}
-+			if (!strcmp(buf,"asusX")) {
-+				//asus wl-500g
-+				reset_gpio=(1<<6);
-+			}
-+		}
-+		if (!strcmp(buf,"bcm94710ap")) {
-+			buf=nvram_get("boardnum")?:"";
-+			if (!strcmp(buf,"42")) {
-+				// buffalo
-+				set_dmz=v2_set_dmz;
-+				reset_gpio=(1<<4);
-+			}
-+			if (!strcmp(buf,"44")) {
-+				//dell truemobile
-+				set_dmz=v2_set_dmz;
-+				reset_gpio=(1<<0);
-+			}
-+		}
-+	} else {
-+		buf=nvram_get("boardnum")?:"";
-+		if (!strcmp(buf,"42")) {
-+			//linksys
-+			set_diag=v2_set_diag;
-+			set_dmz=v2_set_dmz;
-+			reset_gpio=(1<<6);
-+		}
-+		if (!strcmp(buf,"44")) {
-+			//motorola
-+			reset_gpio=(1<<5);
-+		}
-+		if (!strcmp(buf,"00")) {
-+			//buffalo
-+			reset_gpio=(1<<7);
-+		}
-+		if (!strcmp(buf,"45")) {
-+			//wl-500g deluxe
-+			reset_gpio=(1<<6);
-+		}
-+	}
-+
-+	*/	
-+	sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
-+	sb_gpioouten(sbh,reset_gpio,0);
-+	reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
-+
-+	diag_sysctl_header = register_sysctl_table(sys_diag, 0);
-+	diag_change();
-+
-+	return 0;
-+}
-+
-+static void __exit diag_exit()
-+{
-+	unregister_sysctl_table(diag_sysctl_header);
-+}
-+
-+MODULE_AUTHOR("openwrt.org");
-+MODULE_LICENSE("GPL");
-+
-+module_init(diag_init);
-+module_exit(diag_exit);