move old kamikaze out of trunk - will put buildroot-ng in there as soon as all the developers are ready

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@4944 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 178 deletions

diff --git a/openwrt/package/snort/patches/750-lightweight-config.patch b/openwrt/package/snort/patches/750-lightweight-config.patch
deleted file mode 100644
index c8bde27f51..0000000000
--- a/openwrt/package/snort/patches/750-lightweight-config.patch
+++ /dev/null
@@ -1,178 +0,0 @@
---- snort-2.3.2-orig/etc/snort.conf	2005-03-10 23:04:38.000000000 +0100
-+++ snort-2.3.2-1/etc/snort.conf	2005-04-04 20:01:41.000000000 +0200
-@@ -6,6 +6,7 @@
- #
- ###################################################
- # This file contains a sample snort configuration. 
-+# Most preprocessors and rules were disabled to save memory.
- # You can take the following steps to create your own custom configuration:
- #
- #  1) Set the network variables for your network
-@@ -41,10 +42,10 @@
- # or you can specify the variable to be any IP address
- # like this:
- 
--var HOME_NET any
-+var HOME_NET 192.168.1.0/24
- 
- # Set up the external network addresses as well.  A good start may be "any"
--var EXTERNAL_NET any
-+var EXTERNAL_NET !$HOME_NET
- 
- # Configure your server lists.  This allows snort to only look for attacks to
- # systems that have a service up.  Why look for HTTP attacks if you are not
-@@ -106,7 +107,7 @@
- # Path to your rules files (this can be a relative path)
- # Note for Windows users:  You are advised to make this an absolute path,
- # such as:  c:\snort\rules
--var RULE_PATH ../rules
-+var RULE_PATH /etc/snort/rules
- 
- # Configure the snort decoder
- # ============================
-@@ -297,11 +298,11 @@
- # lots of options available here. See doc/README.http_inspect.
- # unicode.map should be wherever your snort.conf lives, or given
- # a full path to where snort can find it.
--preprocessor http_inspect: global \
--    iis_unicode_map unicode.map 1252 
-+#preprocessor http_inspect: global \
-+#    iis_unicode_map unicode.map 1252 
- 
--preprocessor http_inspect_server: server default \
--    profile all ports { 80 8080 8180 } oversize_dir_length 500
-+#preprocessor http_inspect_server: server default \
-+#    profile all ports { 80 8080 8180 } oversize_dir_length 500
- 
- #
- #  Example unique server configuration
-@@ -335,7 +336,7 @@
- # no_alert_incomplete - don't alert when a single segment
- #                       exceeds the current packet size
- 
--preprocessor rpc_decode: 111 32771
-+#preprocessor rpc_decode: 111 32771
- 
- # bo: Back Orifice detector
- # -------------------------
-@@ -347,7 +348,7 @@
- # -----   -------------------
- #   1       Back Orifice traffic detected
- 
--preprocessor bo
-+#preprocessor bo
- 
- # telnet_decode: Telnet negotiation string normalizer
- # ---------------------------------------------------
-@@ -359,7 +360,7 @@
- # This preprocessor requires no arguments.
- # Portscan uses Generator ID 109 and does not generate any SID currently.
- 
--preprocessor telnet_decode
-+#preprocessor telnet_decode
- 
- # Flow-Portscan: detect a variety of portscans
- # ---------------------------------------
-@@ -455,9 +456,9 @@
- #       are still watched as scanner hosts.  The 'ignore_scanned' option is
- #       used to tune alerts from very active hosts such as syslog servers, etc.
- #
--preprocessor sfportscan: proto  { all } \
--                         memcap { 10000000 } \
--                         sense_level { low }
-+#preprocessor sfportscan: proto  { all } \
-+#                         memcap { 10000000 } \
-+#                         sense_level { low }
- 
- # arpspoof
- #----------------------------------------
-@@ -642,41 +643,41 @@
- include $RULE_PATH/bad-traffic.rules
- include $RULE_PATH/exploit.rules
- include $RULE_PATH/scan.rules
--include $RULE_PATH/finger.rules
--include $RULE_PATH/ftp.rules
--include $RULE_PATH/telnet.rules
--include $RULE_PATH/rpc.rules
--include $RULE_PATH/rservices.rules
--include $RULE_PATH/dos.rules
--include $RULE_PATH/ddos.rules
--include $RULE_PATH/dns.rules
--include $RULE_PATH/tftp.rules
--
--include $RULE_PATH/web-cgi.rules
--include $RULE_PATH/web-coldfusion.rules
--include $RULE_PATH/web-iis.rules
--include $RULE_PATH/web-frontpage.rules
--include $RULE_PATH/web-misc.rules
--include $RULE_PATH/web-client.rules
--include $RULE_PATH/web-php.rules
--
--include $RULE_PATH/sql.rules
--include $RULE_PATH/x11.rules
--include $RULE_PATH/icmp.rules
--include $RULE_PATH/netbios.rules
--include $RULE_PATH/misc.rules
--include $RULE_PATH/attack-responses.rules
--include $RULE_PATH/oracle.rules
--include $RULE_PATH/mysql.rules
--include $RULE_PATH/snmp.rules
--
--include $RULE_PATH/smtp.rules
--include $RULE_PATH/imap.rules
--include $RULE_PATH/pop2.rules
--include $RULE_PATH/pop3.rules
-+#include $RULE_PATH/finger.rules
-+#include $RULE_PATH/ftp.rules
-+#include $RULE_PATH/telnet.rules
-+#include $RULE_PATH/rpc.rules
-+#include $RULE_PATH/rservices.rules
-+#include $RULE_PATH/dos.rules
-+#include $RULE_PATH/ddos.rules
-+#include $RULE_PATH/dns.rules
-+#include $RULE_PATH/tftp.rules
-+
-+#include $RULE_PATH/web-cgi.rules
-+#include $RULE_PATH/web-coldfusion.rules
-+#include $RULE_PATH/web-iis.rules
-+#include $RULE_PATH/web-frontpage.rules
-+#include $RULE_PATH/web-misc.rules
-+#include $RULE_PATH/web-client.rules
-+#include $RULE_PATH/web-php.rules
-+
-+#include $RULE_PATH/sql.rules
-+#include $RULE_PATH/x11.rules
-+#include $RULE_PATH/icmp.rules
-+#include $RULE_PATH/netbios.rules
-+#include $RULE_PATH/misc.rules
-+#include $RULE_PATH/attack-responses.rules
-+#include $RULE_PATH/oracle.rules
-+#include $RULE_PATH/mysql.rules
-+#include $RULE_PATH/snmp.rules
-+
-+#include $RULE_PATH/smtp.rules
-+#include $RULE_PATH/imap.rules
-+#include $RULE_PATH/pop2.rules
-+#include $RULE_PATH/pop3.rules
- 
--include $RULE_PATH/nntp.rules
--include $RULE_PATH/other-ids.rules
-+#include $RULE_PATH/nntp.rules
-+#include $RULE_PATH/other-ids.rules
- # include $RULE_PATH/web-attacks.rules
- # include $RULE_PATH/backdoor.rules
- # include $RULE_PATH/shellcode.rules
-@@ -684,11 +685,11 @@
- # include $RULE_PATH/porn.rules
- # include $RULE_PATH/info.rules
- # include $RULE_PATH/icmp-info.rules
-- include $RULE_PATH/virus.rules
-+# include $RULE_PATH/virus.rules
- # include $RULE_PATH/chat.rules
- # include $RULE_PATH/multimedia.rules
- # include $RULE_PATH/p2p.rules
--include $RULE_PATH/experimental.rules
-+#include $RULE_PATH/experimental.rules
- 
- # Include any thresholding or suppression commands. See threshold.conf in the
- # <snort src>/etc directory for details. Commands don't necessarily need to be