add all source code from linksys/broadcom which is free, to cvs for better maintainence inside

openwrt. this gives us the ability to better support different hardware models, without changing
any external tar-balls. only et.o and wl.o is missing and is fetched from my webserver.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@379 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 242 insertions, 0 deletions

diff --git a/openwrt/package/linux/kernel-source/include/sbextif.h b/openwrt/package/linux/kernel-source/include/sbextif.h
new file mode 100644
index 0000000000..32274b8165
--- /dev/null
+++ b/openwrt/package/linux/kernel-source/include/sbextif.h
@@ -0,0 +1,242 @@
+/*
+ * Hardware-specific External Interface I/O core definitions
+ * for the BCM47xx family of SiliconBackplane-based chips.
+ *
+ * The External Interface core supports a total of three external chip selects
+ * supporting external interfaces. One of the external chip selects is
+ * used for Flash, one is used for PCMCIA, and the other may be
+ * programmed to support either a synchronous interface or an
+ * asynchronous interface. The asynchronous interface can be used to
+ * support external devices such as UARTs and the BCM2019 Bluetooth
+ * baseband processor.
+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
+ *
+ * Copyright 2004, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#ifndef	_SBEXTIF_H
+#define	_SBEXTIF_H
+
+/* external interface address space */
+#define	EXTIF_PCMCIA_MEMBASE(x)	(x)
+#define	EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
+#define	EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
+#define	EXTIF_CFGIF_BASE(x)	((x) + 0x800000)
+#define	EXTIF_FLASH_BASE(x)	((x) + 0xc00000)
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif	/* PAD */
+
+/*
+ * The multiple instances of output and output enable registers
+ * are present to allow driver software for multiple cores to control
+ * gpio outputs without needing to share a single register pair.
+ */
+struct gpiouser {
+	uint32	out;
+	uint32	outen;
+};
+#define	NGPIOUSER	5
+
+typedef volatile struct {
+	uint32	corecontrol;
+	uint32	extstatus;
+	uint32	PAD[2];
+
+	/* pcmcia control registers */
+	uint32	pcmcia_config;
+	uint32	pcmcia_memwait;
+	uint32	pcmcia_attrwait;
+	uint32	pcmcia_iowait;
+
+	/* programmable interface control registers */
+	uint32	prog_config;
+	uint32	prog_waitcount;
+
+	/* flash control registers */
+	uint32	flash_config;
+	uint32	flash_waitcount;
+	uint32	PAD[4];
+
+	uint32	watchdog;
+
+	/* clock control */
+	uint32	clockcontrol_n;
+	uint32	clockcontrol_sb;
+	uint32	clockcontrol_pci;
+	uint32	clockcontrol_mii;
+	uint32	PAD[3];
+
+	/* gpio */
+	uint32	gpioin;
+	struct gpiouser	gpio[NGPIOUSER];
+	uint32	PAD;
+	uint32	ejtagouten;
+	uint32	gpiointpolarity;
+	uint32	gpiointmask;
+	uint32	PAD[153];
+
+	uint8	uartdata;
+	uint8	PAD[3];
+	uint8	uartimer;
+	uint8	PAD[3];
+	uint8	uartfcr;
+	uint8	PAD[3];
+	uint8	uartlcr;
+	uint8	PAD[3];
+	uint8	uartmcr;
+	uint8	PAD[3];
+	uint8	uartlsr;
+	uint8	PAD[3];
+	uint8	uartmsr;
+	uint8	PAD[3];
+	uint8	uartscratch;
+	uint8	PAD[3];
+} extifregs_t;
+
+/* corecontrol */
+#define	CC_UE		(1 << 0)		/* uart enable */
+
+/* extstatus */
+#define	ES_EM		(1 << 0)		/* endian mode (ro) */
+#define	ES_EI		(1 << 1)		/* external interrupt pin (ro) */
+#define	ES_GI		(1 << 2)		/* gpio interrupt pin (ro) */
+
+/* gpio bit mask */
+#define GPIO_BIT0	(1 << 0)
+#define GPIO_BIT1	(1 << 1)
+#define GPIO_BIT2	(1 << 2)
+#define GPIO_BIT3	(1 << 3)
+#define GPIO_BIT4	(1 << 4)
+#define GPIO_BIT5	(1 << 5)
+#define GPIO_BIT6	(1 << 6)
+#define GPIO_BIT7	(1 << 7)
+
+
+/* pcmcia/prog/flash_config */
+#define	CF_EN		(1 << 0)		/* enable */
+#define	CF_EM_MASK	0xe			/* mode */
+#define	CF_EM_SHIFT	1
+#define	CF_EM_FLASH	0x0			/* flash/asynchronous mode */
+#define	CF_EM_SYNC	0x2			/* synchronous mode */
+#define	CF_EM_PCMCIA	0x4			/* pcmcia mode */
+#define	CF_DS		(1 << 4)		/* destsize:  0=8bit, 1=16bit */
+#define	CF_BS		(1 << 5)		/* byteswap */
+#define	CF_CD_MASK	0xc0			/* clock divider */
+#define	CF_CD_SHIFT	6
+#define	CF_CD_DIV2	0x0			/* backplane/2 */
+#define	CF_CD_DIV3	0x40			/* backplane/3 */
+#define	CF_CD_DIV4	0x80			/* backplane/4 */
+#define	CF_CE		(1 << 8)		/* clock enable */
+#define	CF_SB		(1 << 9)		/* size/bytestrobe (synch only) */
+
+/* pcmcia_memwait */
+#define	PM_W0_MASK	0x3f			/* waitcount0 */
+#define	PM_W1_MASK	0x1f00			/* waitcount1 */
+#define	PM_W1_SHIFT	8
+#define	PM_W2_MASK	0x1f0000		/* waitcount2 */
+#define	PM_W2_SHIFT	16
+#define	PM_W3_MASK	0x1f000000		/* waitcount3 */
+#define	PM_W3_SHIFT	24
+
+/* pcmcia_attrwait */
+#define	PA_W0_MASK	0x3f			/* waitcount0 */
+#define	PA_W1_MASK	0x1f00			/* waitcount1 */
+#define	PA_W1_SHIFT	8
+#define	PA_W2_MASK	0x1f0000		/* waitcount2 */
+#define	PA_W2_SHIFT	16
+#define	PA_W3_MASK	0x1f000000		/* waitcount3 */
+#define	PA_W3_SHIFT	24
+
+/* pcmcia_iowait */
+#define	PI_W0_MASK	0x3f			/* waitcount0 */
+#define	PI_W1_MASK	0x1f00			/* waitcount1 */
+#define	PI_W1_SHIFT	8
+#define	PI_W2_MASK	0x1f0000		/* waitcount2 */
+#define	PI_W2_SHIFT	16
+#define	PI_W3_MASK	0x1f000000		/* waitcount3 */
+#define	PI_W3_SHIFT	24
+
+/* prog_waitcount */
+#define	PW_W0_MASK	0x0000001f			/* waitcount0 */
+#define	PW_W1_MASK	0x00001f00			/* waitcount1 */
+#define	PW_W1_SHIFT	8
+#define	PW_W2_MASK	0x001f0000		/* waitcount2 */
+#define	PW_W2_SHIFT	16
+#define	PW_W3_MASK	0x1f000000		/* waitcount3 */
+#define	PW_W3_SHIFT	24
+
+#define PW_W0       0x0000000c
+#define PW_W1       0x00000a00
+#define PW_W2       0x00020000
+#define PW_W3       0x01000000
+
+/* flash_waitcount */
+#define	FW_W0_MASK	0x1f			/* waitcount0 */
+#define	FW_W1_MASK	0x1f00			/* waitcount1 */
+#define	FW_W1_SHIFT	8
+#define	FW_W2_MASK	0x1f0000		/* waitcount2 */
+#define	FW_W2_SHIFT	16
+#define	FW_W3_MASK	0x1f000000		/* waitcount3 */
+#define	FW_W3_SHIFT	24
+
+/* watchdog */
+#define WATCHDOG_CLOCK	48000000		/* Hz */
+
+/* clockcontrol_n */
+#define	CN_N1_MASK	0x3f			/* n1 control */
+#define	CN_N2_MASK	0x3f00			/* n2 control */
+#define	CN_N2_SHIFT	8
+
+/* clockcontrol_sb/pci/mii */
+#define	CC_M1_MASK	0x3f			/* m1 control */
+#define	CC_M2_MASK	0x3f00			/* m2 control */
+#define	CC_M2_SHIFT	8
+#define	CC_M3_MASK	0x3f0000		/* m3 control */
+#define	CC_M3_SHIFT	16
+#define	CC_MC_MASK	0x1f000000		/* mux control */
+#define	CC_MC_SHIFT	24
+
+/* Clock control default values */
+#define CC_DEF_N	0x0009			/* Default values for bcm4710 */
+#define CC_DEF_100	0x04020011
+#define CC_DEF_33	0x11030011
+#define CC_DEF_25	0x11050011
+
+/* Clock control values for 125Mhz */
+#define	CC_125_N	0x0802
+#define	CC_125_M	0x04020009
+#define	CC_125_M25	0x11090009
+#define	CC_125_M33	0x11090005
+
+/* Clock control magic field values */
+#define	CC_F6_2		0x02			/* A factor of 2 in */
+#define	CC_F6_3		0x03			/*  6-bit fields like */
+#define	CC_F6_4		0x05			/*  N1, M1 or M3 */
+#define	CC_F6_5		0x09
+#define	CC_F6_6		0x11
+#define	CC_F6_7		0x21
+
+#define	CC_F5_BIAS	5			/* 5-bit fields get this added */
+
+#define	CC_MC_BYPASS	0x08
+#define	CC_MC_M1	0x04
+#define	CC_MC_M1M2	0x02
+#define	CC_MC_M1M2M3	0x01
+#define	CC_MC_M1M3	0x11
+
+#define	CC_CLOCK_BASE	24000000	/* Half the clock freq. in the 4710 */
+
+#endif	/* _SBEXTIF_H */