ar7: 2.6.25.1 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11023 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 files changed, 723 insertions, 0 deletions

diff --git a/target/linux/ar7/patches-2.6.25/100-board_support.patch b/target/linux/ar7/patches-2.6.25/100-board_support.patch
new file mode 100644
index 0000000000..08cf79be2e
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/100-board_support.patch
@@ -0,0 +1,94 @@
+Index: linux-2.6.25.1/arch/mips/Kconfig
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/Kconfig	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/arch/mips/Kconfig	2008-05-03 16:17:54.000000000 +0200
+@@ -18,6 +18,24 @@
+ 	prompt "System type"
+ 	default SGI_IP22
+ 
++config AR7
++	bool "Texas Instruments AR7"
++	select BOOT_ELF32
++	select DMA_NONCOHERENT
++	select CEVT_R4K
++	select CSRC_R4K
++	select IRQ_CPU
++	select NO_EXCEPT_FILL
++	select SWAP_IO_SPACE
++	select SYS_HAS_CPU_MIPS32_R1
++	select SYS_HAS_EARLY_PRINTK
++	select SYS_SUPPORTS_32BIT_KERNEL
++	select SYS_SUPPORTS_KGDB
++	select SYS_SUPPORTS_LITTLE_ENDIAN
++	select SYS_SUPPORTS_BIG_ENDIAN
++	select GENERIC_GPIO
++	select GENERIC_HARDIRQS_NO__DO_IRQ
++
+ config MACH_ALCHEMY
+ 	bool "Alchemy processor based machines"
+ 
+Index: linux-2.6.25.1/arch/mips/kernel/traps.c
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/kernel/traps.c	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/arch/mips/kernel/traps.c	2008-05-03 16:17:54.000000000 +0200
+@@ -1112,9 +1112,22 @@
+ 
+ 	exception_handlers[n] = handler;
+ 	if (n == 0 && cpu_has_divec) {
+-		*(u32 *)(ebase + 0x200) = 0x08000000 |
+-					  (0x03ffffff & (handler >> 2));
+-		flush_icache_range(ebase + 0x200, ebase + 0x204);
++		if ((handler ^ (ebase + 4)) & 0xfc000000) {
++			/* lui k0, 0x0000 */
++			*(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16);
++			/* ori k0, 0x0000 */
++			*(u32 *)(ebase + 0x204) =
++					0x375a0000 | (handler & 0xffff);
++			/* jr k0 */
++			*(u32 *)(ebase + 0x208) = 0x03400008;
++			/* nop */
++			*(u32 *)(ebase + 0x20C) = 0x00000000;
++			flush_icache_range(ebase + 0x200, ebase + 0x210);
++		} else {
++			*(u32 *)(ebase + 0x200) =
++				0x08000000 | (0x03ffffff & (handler >> 2));
++			flush_icache_range(ebase + 0x200, ebase + 0x204);
++		}
+ 	}
+ 	return (void *)old_handler;
+ }
+Index: linux-2.6.25.1/arch/mips/Makefile
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/Makefile	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/arch/mips/Makefile	2008-05-03 16:17:54.000000000 +0200
+@@ -167,6 +167,13 @@
+ #
+ 
+ #
++# Texas Instruments AR7
++#
++core-$(CONFIG_AR7)		+= arch/mips/ar7/
++cflags-$(CONFIG_AR7)		+= -Iinclude/asm-mips/ar7
++load-$(CONFIG_AR7)		+= 0xffffffff94100000
++
++#
+ # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
+ #
+ core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
+Index: linux-2.6.25.1/include/asm-mips/page.h
+===================================================================
+--- linux-2.6.25.1.orig/include/asm-mips/page.h	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/include/asm-mips/page.h	2008-05-03 16:17:54.000000000 +0200
+@@ -182,8 +182,10 @@
+ #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+ 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+ 
+-#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE)
+-#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
++#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE +	\
++				 PHYS_OFFSET)
++#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET -	\
++				 PHYS_OFFSET)
+ 
+ #include <asm-generic/memory_model.h>
+ #include <asm-generic/page.h>
diff --git a/target/linux/ar7/patches-2.6.25/110-flash.patch b/target/linux/ar7/patches-2.6.25/110-flash.patch
new file mode 100644
index 0000000000..02f8d952f0
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/110-flash.patch
@@ -0,0 +1,43 @@
+Index: linux-2.6.25.1/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.25.1.orig/drivers/mtd/Kconfig	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/mtd/Kconfig	2008-05-03 16:18:06.000000000 +0200
+@@ -158,6 +158,12 @@
+ 	  the partition map from the children of the flash node,
+ 	  as described in Documentation/powerpc/booting-without-of.txt.
+ 
++config MTD_AR7_PARTS
++	tristate "TI AR7 partitioning support"
++	depends on MTD_PARTITIONS
++	---help---
++	  TI AR7 partitioning support
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+Index: linux-2.6.25.1/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.25.1.orig/drivers/mtd/Makefile	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/mtd/Makefile	2008-05-03 16:18:06.000000000 +0200
+@@ -12,6 +12,7 @@
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
++obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
+Index: linux-2.6.25.1/drivers/mtd/maps/physmap.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/mtd/maps/physmap.c	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/mtd/maps/physmap.c	2008-05-03 16:18:06.000000000 +0200
+@@ -87,7 +87,8 @@
+ 
+ static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
+ #ifdef CONFIG_MTD_PARTITIONS
+-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
++static const char *part_probe_types[] = {"cmdlinepart", "RedBoot",
++					"ar7part", NULL };
+ #endif
+ 
+ static int physmap_flash_probe(struct platform_device *dev)
diff --git a/target/linux/ar7/patches-2.6.25/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.25/120-gpio_chrdev.patch
new file mode 100644
index 0000000000..f80f022254
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/120-gpio_chrdev.patch
@@ -0,0 +1,32 @@
+Index: linux-2.6.25.1/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.25.1.orig/drivers/char/Kconfig	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/char/Kconfig	2008-05-03 16:18:26.000000000 +0200
+@@ -913,6 +913,15 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called mwave.
+ 
++config AR7_GPIO
++	tristate "TI AR7 GPIO Support"
++	depends on AR7
++	help
++	  Give userspace access to the GPIO pins on the Texas Instruments AR7 
++	  processors.
++
++	  If compiled as a module, it will be called ar7_gpio.
++
+ config SCx200_GPIO
+ 	tristate "NatSemi SCx200 GPIO Support"
+ 	depends on SCx200
+Index: linux-2.6.25.1/drivers/char/Makefile
+===================================================================
+--- linux-2.6.25.1.orig/drivers/char/Makefile	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/char/Makefile	2008-05-03 16:18:26.000000000 +0200
+@@ -90,6 +90,7 @@
+ obj-$(CONFIG_PPDEV)		+= ppdev.o
+ obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
+ obj-$(CONFIG_NWFLASH)		+= nwflash.o
++obj-$(CONFIG_AR7_GPIO)		+= ar7_gpio.o
+ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
diff --git a/target/linux/ar7/patches-2.6.25/130-vlynq.patch b/target/linux/ar7/patches-2.6.25/130-vlynq.patch
new file mode 100644
index 0000000000..090d8c5999
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/130-vlynq.patch
@@ -0,0 +1,22 @@
+Index: linux-2.6.25.1/drivers/Kconfig
+===================================================================
+--- linux-2.6.25.1.orig/drivers/Kconfig	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/Kconfig	2008-05-03 16:19:06.000000000 +0200
+@@ -97,4 +97,6 @@
+ source "drivers/auxdisplay/Kconfig"
+ 
+ source "drivers/uio/Kconfig"
++
++source "drivers/vlynq/Kconfig"
+ endmenu
+Index: linux-2.6.25.1/drivers/Makefile
+===================================================================
+--- linux-2.6.25.1.orig/drivers/Makefile	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/Makefile	2008-05-03 16:18:37.000000000 +0200
+@@ -91,5 +91,6 @@
+ obj-$(CONFIG_HID)		+= hid/
+ obj-$(CONFIG_PPC_PS3)		+= ps3/
+ obj-$(CONFIG_OF)		+= of/
++obj-$(CONFIG_VLYNQ)		+= vlynq/
+ obj-$(CONFIG_SSB)		+= ssb/
+ obj-$(CONFIG_VIRTIO)		+= virtio/
diff --git a/target/linux/ar7/patches-2.6.25/140-cpmac_fix.patch b/target/linux/ar7/patches-2.6.25/140-cpmac_fix.patch
new file mode 100644
index 0000000000..2435b3518e
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/140-cpmac_fix.patch
@@ -0,0 +1,169 @@
+Index: linux-2.6.25.1/drivers/net/cpmac.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/cpmac.c	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/net/cpmac.c	2008-05-03 16:21:17.000000000 +0200
+@@ -38,6 +38,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/dma-mapping.h>
+ #include <asm/gpio.h>
++#include <asm/atomic.h>
+ 
+ MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
+ MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
+@@ -207,6 +208,7 @@
+ 	struct work_struct reset_work;
+ 	struct platform_device *pdev;
+ 	struct napi_struct napi;
++	atomic_t reset_pending;
+ };
+ 
+ static irqreturn_t cpmac_irq(int, void *);
+@@ -455,6 +457,9 @@
+ 	struct cpmac_desc *desc;
+ 	struct cpmac_priv *priv = netdev_priv(dev);
+ 
++	if (unlikely(atomic_read(&priv->reset_pending)))
++		return NETDEV_TX_BUSY;
++
+ 	if (unlikely(skb_padto(skb, ETH_ZLEN)))
+ 		return NETDEV_TX_OK;
+ 
+@@ -634,14 +639,14 @@
+ 		priv->desc_ring[i].dataflags = 0;
+ 		if (priv->desc_ring[i].skb) {
+ 			dev_kfree_skb_any(priv->desc_ring[i].skb);
+-			if (netif_subqueue_stopped(dev, i))
+-			    netif_wake_subqueue(dev, i);
++			priv->desc_ring[i].skb = NULL;
+ 		}
+ 	}
+ }
+ 
+ static void cpmac_hw_error(struct work_struct *work)
+ {
++	int i;
+ 	struct cpmac_priv *priv =
+ 		container_of(work, struct cpmac_priv, reset_work);
+ 
+@@ -650,8 +655,47 @@
+ 	spin_unlock(&priv->rx_lock);
+ 	cpmac_clear_tx(priv->dev);
+ 	cpmac_hw_start(priv->dev);
+-	napi_enable(&priv->napi);
+-	netif_start_queue(priv->dev);
++	barrier();
++	atomic_dec(&priv->reset_pending);
++	
++	for (i = 0; i < CPMAC_QUEUES; i++) {
++		netif_wake_subqueue(priv->dev, i);
++	}
++	netif_wake_queue(priv->dev);
++	cpmac_write(priv->regs, CPMAC_MAC_INT_ENABLE, 3);
++}
++
++static void cpmac_check_status(struct net_device *dev)
++{
++	struct cpmac_priv *priv = netdev_priv(dev);
++
++	u32 macstatus = cpmac_read(priv->regs, CPMAC_MAC_STATUS);
++	int rx_channel = (macstatus >> 8) & 7;
++	int rx_code = (macstatus >> 12) & 15;
++	int tx_channel = (macstatus >> 16) & 7;
++	int tx_code = (macstatus >> 20) & 15;
++
++	if (rx_code || tx_code) {
++		if (netif_msg_drv(priv) && net_ratelimit()) {
++			/* Can't find any documentation on what these error codes actually are.
++			 * So just log them and hope..
++			 */
++			if (rx_code)
++				printk(KERN_WARNING "%s: host error %d on rx channel %d (macstatus %08x), resetting\n",
++				       dev->name, rx_code, rx_channel, macstatus);
++			if (tx_code)
++				printk(KERN_WARNING "%s: host error %d on tx channel %d (macstatus %08x), resetting\n",
++				       dev->name, tx_code, tx_channel, macstatus);
++		}
++		
++		netif_stop_queue(dev);
++		cpmac_hw_stop(dev);
++		if (schedule_work(&priv->reset_work))
++			atomic_inc(&priv->reset_pending);
++		if (unlikely(netif_msg_hw(priv)))
++			cpmac_dump_regs(dev);
++	}
++	cpmac_write(priv->regs, CPMAC_MAC_INT_CLEAR, 0xff);
+ }
+ 
+ static irqreturn_t cpmac_irq(int irq, void *dev_id)
+@@ -682,49 +726,33 @@
+ 
+ 	cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0);
+ 
+-	if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) {
+-		if (netif_msg_drv(priv) && net_ratelimit())
+-			printk(KERN_ERR "%s: hw error, resetting...\n",
+-			       dev->name);
+-		netif_stop_queue(dev);
+-		napi_disable(&priv->napi);
+-		cpmac_hw_stop(dev);
+-		schedule_work(&priv->reset_work);
+-		if (unlikely(netif_msg_hw(priv)))
+-			cpmac_dump_regs(dev);
+-	}
++	if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS)))
++		cpmac_check_status(dev);
+ 
+ 	return IRQ_HANDLED;
+ }
+ 
+ static void cpmac_tx_timeout(struct net_device *dev)
+ {
+-	struct cpmac_priv *priv = netdev_priv(dev);
+ 	int i;
++	struct cpmac_priv *priv = netdev_priv(dev);
+ 
+ 	spin_lock(&priv->lock);
+ 	dev->stats.tx_errors++;
+ 	spin_unlock(&priv->lock);
+ 	if (netif_msg_tx_err(priv) && net_ratelimit())
+ 		printk(KERN_WARNING "%s: transmit timeout\n", dev->name);
+-	/* 
+-	 * FIXME: waking up random queue is not the best thing to
+-	 * do... on the other hand why we got here at all?
+-	 */
+-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+-	for (i = 0; i < CPMAC_QUEUES; i++)
+-		if (priv->desc_ring[i].skb) {
+-			priv->desc_ring[i].dataflags = 0;
+-			dev_kfree_skb_any(priv->desc_ring[i].skb);
+-			netif_wake_subqueue(dev, i);
+-			break;
+-		}
+-#else
+-	priv->desc_ring[0].dataflags = 0;
+-	if (priv->desc_ring[0].skb)
+-		dev_kfree_skb_any(priv->desc_ring[0].skb);
+-	netif_wake_queue(dev);
+-#endif
++
++	atomic_inc(&priv->reset_pending);
++	barrier();
++	cpmac_clear_tx(dev);
++	barrier();
++	atomic_dec(&priv->reset_pending);
++
++	netif_wake_queue(priv->dev);
++	for (i = 0; i < CPMAC_QUEUES; i++) {
++		netif_wake_subqueue(dev, i);
++	}
+ }
+ 
+ static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+@@ -911,6 +939,7 @@
+ 		goto fail_irq;
+ 	}
+ 
++	atomic_set(&priv->reset_pending, 0);
+ 	INIT_WORK(&priv->reset_work, cpmac_hw_error);
+ 	cpmac_hw_start(dev);
+ 
diff --git a/target/linux/ar7/patches-2.6.25/150-cpmac_up_and_running.diff b/target/linux/ar7/patches-2.6.25/150-cpmac_up_and_running.diff
new file mode 100644
index 0000000000..9b15772c40
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/150-cpmac_up_and_running.diff
@@ -0,0 +1,95 @@
+From 0daaa095cefd9d7091a7ccce2ff89f1ff4feae7a Mon Sep 17 00:00:00 2001
+From: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed, 5 Mar 2008 14:52:26 +0300
+Subject: [PATCH] AR7/cpmac: convert to new fixed phy infrastructure, now for real
+
+This patch converts platform code to register fixed phys early.
+cpmac driver modified to blindly accept fixed phy id (that is equal
+to platform device id).
+
+Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+---
+ arch/mips/ar7/platform.c |   17 +++++++++++++++++
+ drivers/net/cpmac.c      |   19 +++----------------
+ 2 files changed, 20 insertions(+), 16 deletions(-)
+
+Index: linux-2.6.25.1/arch/mips/ar7/platform.c
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/ar7/platform.c	2008-05-03 16:17:30.000000000 +0200
++++ linux-2.6.25.1/arch/mips/ar7/platform.c	2008-05-03 16:24:08.000000000 +0200
+@@ -33,6 +33,8 @@
+ #include <linux/vlynq.h>
+ #include <linux/leds.h>
+ #include <linux/string.h>
++#include <linux/phy.h>
++#include <linux/phy_fixed.h>
+ 
+ #include <asm/addrspace.h>
+ #include <asm/ar7/ar7.h>
+@@ -205,6 +207,13 @@
+ 	.width = 2,
+ };
+ 
++/* lets assume this is suitable for both high and low cpmacs links */
++static struct fixed_phy_status fixed_phy_status __initdata = {
++	.link = 1,
++	.speed = 100,
++	.duplex = 1,
++};
++
+ static struct plat_cpmac_data cpmac_low_data = {
+ 	.reset_bit = 17,
+ 	.power_bit = 20,
+@@ -506,6 +515,10 @@
+ 	}
+ 
+ 	if (ar7_has_high_cpmac()) {
++		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
++		if (res && res != -ENODEV)
++			return res;
++
+ 		cpmac_get_mac(1, cpmac_high_data.dev_addr);
+ 		res = platform_device_register(&cpmac_high);
+ 		if (res)
+@@ -514,6 +527,10 @@
+ 		cpmac_low_data.phy_mask = 0xffffffff;
+ 	}
+ 
++	res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
++	if (res && res != -ENODEV)
++		return res;
++
+ 	cpmac_get_mac(0, cpmac_low_data.dev_addr);
+ 	res = platform_device_register(&cpmac_low);
+ 	if (res)
+Index: linux-2.6.25.1/drivers/net/cpmac.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/cpmac.c	2008-05-03 16:21:17.000000000 +0200
++++ linux-2.6.25.1/drivers/net/cpmac.c	2008-05-03 16:24:08.000000000 +0200
+@@ -1035,23 +1035,10 @@
+ 
+ 	if (phy_id == PHY_MAX_ADDR) {
+ 		if (external_switch || dumb_switch) {
+-			struct fixed_phy_status status = {};
+-
+-			mdio_bus_id = 0;
+-
+-			/*
+-			 * FIXME: this should be in the platform code!
+-			 * Since there is not platform code at all (that is,
+-			 * no mainline users of that driver), place it here
+-			 * for now.
+-			 */
+-			phy_id = 0;
+-			status.link = 1;
+-			status.duplex = 1;
+-			status.speed = 100;
+-			fixed_phy_add(PHY_POLL, phy_id, &status);
++			mdio_bus_id = 0; /* fixed phys bus */
++			phy_id = pdev->id;
+ 		} else {
+-			printk(KERN_ERR "cpmac: no PHY present\n");
++			dev_err(&pdev->dev, "no PHY present\n");
+ 			return -ENODEV;
+ 		}
+ 	}
diff --git a/target/linux/ar7/patches-2.6.25/160-cpmac-rx-ring-use-eoq.diff b/target/linux/ar7/patches-2.6.25/160-cpmac-rx-ring-use-eoq.diff
new file mode 100644
index 0000000000..d99243f8af
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/160-cpmac-rx-ring-use-eoq.diff
@@ -0,0 +1,180 @@
+Index: linux-2.6.25.1/drivers/net/cpmac.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/cpmac.c	2008-05-03 16:24:08.000000000 +0200
++++ linux-2.6.25.1/drivers/net/cpmac.c	2008-05-03 16:24:37.000000000 +0200
+@@ -187,6 +187,7 @@
+ #define CPMAC_EOQ			0x1000
+ 	struct sk_buff *skb;
+ 	struct cpmac_desc *next;
++	struct cpmac_desc *prev;
+ 	dma_addr_t mapping;
+ 	dma_addr_t data_mapping;
+ };
+@@ -242,6 +243,16 @@
+ 	printk("\n");
+ }
+ 
++static void cpmac_dump_all_desc(struct net_device *dev)
++{
++        struct cpmac_priv *priv = netdev_priv(dev);
++        struct cpmac_desc *dump = priv->rx_head;
++        do {
++                cpmac_dump_desc(dev, dump);
++                dump = dump->next;
++        } while (dump != priv->rx_head);
++}
++
+ static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb)
+ {
+ 	int i;
+@@ -413,21 +424,40 @@
+ static int cpmac_poll(struct napi_struct *napi, int budget)
+ {
+ 	struct sk_buff *skb;
+-	struct cpmac_desc *desc;
+-	int received = 0;
++	struct cpmac_desc *desc, *restart;
+ 	struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi);
++	int received = 0, processed = 0;
+ 
+ 	spin_lock(&priv->rx_lock);
+ 	if (unlikely(!priv->rx_head)) {
+ 		if (netif_msg_rx_err(priv) && net_ratelimit())
+ 			printk(KERN_WARNING "%s: rx: polling, but no queue\n",
+ 			       priv->dev->name);
++		spin_unlock(&priv->rx_lock);
+ 		netif_rx_complete(priv->dev, napi);
+ 		return 0;
+ 	}
+ 
+ 	desc = priv->rx_head;
++	restart = NULL;
+ 	while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) {
++		processed++;
++		
++		if ((desc->dataflags & CPMAC_EOQ) != 0) {
++			/* The last update to eoq->hw_next didn't happen soon enough, and the
++			* receiver stopped here. Remember this descriptor so we can restart
++			* the receiver after freeing some space.
++			*/
++			if (unlikely(restart)) {
++				if (netif_msg_rx_err(priv))
++					printk(KERN_ERR "%s: poll found a duplicate EOQ: %p and %p\n",
++						priv->dev->name, restart, desc);
++				goto fatal_error;
++			}
++			
++			restart = desc->next;
++		}
++
+ 		skb = cpmac_rx_one(priv, desc);
+ 		if (likely(skb)) {
+ 			netif_receive_skb(skb);
+@@ -436,19 +466,81 @@
+ 		desc = desc->next;
+ 	}
+ 
++	if (desc != priv->rx_head) {
++		/* We freed some buffers, but not the whole ring, add what we did free to the rx list */ 
++		desc->prev->hw_next = (u32)0;
++		priv->rx_head->prev->hw_next = priv->rx_head->mapping;
++	}
++
++	/* Optimization: If we did not actually process an EOQ (perhaps because of 
++	* quota limits), check to see if the tail of the queue has EOQ set. We
++	* should immediately restart in that case so that the receiver can restart
++	* and run in parallel with more packet processing. This lets us handle slightly
++	* larger bursts before running out of ring space (assuming dev->weight < ring_size)
++	*/
++	if (!restart &&
++	     (priv->rx_head->prev->dataflags & (CPMAC_OWN|CPMAC_EOQ)) == CPMAC_EOQ &&
++	     (priv->rx_head->dataflags & CPMAC_OWN) != 0) {
++		/* reset EOQ so the poll loop (above) doesn't try to restart this when it
++		* eventually gets to this descriptor.
++		*/
++		priv->rx_head->prev->dataflags &= ~CPMAC_EOQ;
++		restart = priv->rx_head;
++	}
++
++	if (restart) {
++		priv->dev->stats.rx_errors++;
++		priv->dev->stats.rx_fifo_errors++;
++		if (netif_msg_rx_err(priv) && net_ratelimit())
++			printk(KERN_WARNING "%s: rx dma ring overrun\n", priv->dev->name);
++
++		if (unlikely((restart->dataflags & CPMAC_OWN) == 0)) {
++			if (netif_msg_drv(priv))
++				printk(KERN_ERR "%s: cpmac_poll is trying to restart rx from a descriptor that's not free: %p\n",
++					priv->dev->name, restart);
++				goto fatal_error;
++		}
++
++		cpmac_write(priv->regs, CPMAC_RX_PTR(0), restart->mapping);
++	}
++
+ 	priv->rx_head = desc;
+ 	spin_unlock(&priv->rx_lock);
+ 	if (unlikely(netif_msg_rx_status(priv)))
+ 		printk(KERN_DEBUG "%s: poll processed %d packets\n",
+ 		       priv->dev->name, received);
+-	if (desc->dataflags & CPMAC_OWN) {
++	if (processed == 0) {
++		/* we ran out of packets to read, revert to interrupt-driven mode */ 
+ 		netif_rx_complete(priv->dev, napi);
+-		cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping);
+ 		cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1);
+ 		return 0;
+ 	}
+ 
+ 	return 1;
++
++fatal_error:
++	/* Something went horribly wrong. Reset hardware to try to recover rather than wedging. */ 
++	
++	if (netif_msg_drv(priv)) {
++		printk(KERN_ERR "%s: cpmac_poll is confused. Resetting hardware\n", priv->dev->name);
++		cpmac_dump_all_desc(priv->dev);
++		printk(KERN_DEBUG "%s: RX_PTR(0)=0x%08x RX_ACK(0)=0x%08x\n",
++			priv->dev->name,
++			cpmac_read(priv->regs, CPMAC_RX_PTR(0)),
++			cpmac_read(priv->regs, CPMAC_RX_ACK(0)));
++	}
++
++	spin_unlock(&priv->rx_lock);
++	netif_rx_complete(priv->dev, napi);
++	netif_stop_queue(priv->dev);
++	napi_disable(&priv->napi);
++	
++	atomic_inc(&priv->reset_pending);
++	cpmac_hw_stop(priv->dev);
++	if (!schedule_work(&priv->reset_work))
++		atomic_dec(&priv->reset_pending);
++	return 0;
++ 
+ }
+ 
+ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+@@ -625,8 +717,10 @@
+ 			desc->dataflags = CPMAC_OWN;
+ 			dev->stats.rx_dropped++;
+ 		}
++		desc->hw_next = desc->next->mapping;
+ 		desc = desc->next;
+ 	}
++	priv->rx_head->prev->hw_next = 0;
+ }
+ 
+ static void cpmac_clear_tx(struct net_device *dev)
+@@ -928,9 +1022,12 @@
+ 		desc->buflen = CPMAC_SKB_SIZE;
+ 		desc->dataflags = CPMAC_OWN;
+ 		desc->next = &priv->rx_head[(i + 1) % priv->ring_size];
++		desc->next->prev = desc;
+ 		desc->hw_next = (u32)desc->next->mapping;
+ 	}
+ 
++	priv->rx_head->prev->hw_next = (u32)0;
++
+ 	if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED,
+ 			       dev->name, dev))) {
+ 		if (netif_msg_drv(priv))
diff --git a/target/linux/ar7/patches-2.6.25/170-cpmac_eth_fix.patch b/target/linux/ar7/patches-2.6.25/170-cpmac_eth_fix.patch
new file mode 100644
index 0000000000..c720794d3c
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/170-cpmac_eth_fix.patch
@@ -0,0 +1,15 @@
+Index: linux-2.6.25.1/drivers/net/cpmac.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/cpmac.c	2008-05-03 16:24:37.000000000 +0200
++++ linux-2.6.25.1/drivers/net/cpmac.c	2008-05-03 16:24:49.000000000 +0200
+@@ -1178,9 +1178,7 @@
+ 	priv->msg_enable = netif_msg_init(debug_level, 0xff);
+ 	memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
+ 
+-	snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+-
+-	priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
++	priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id, &cpmac_adjust_link, 0,
+ 				PHY_INTERFACE_MODE_MII);
+ 	if (IS_ERR(priv->phy)) {
+ 		if (netif_msg_drv(priv))
diff --git a/target/linux/ar7/patches-2.6.25/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.25/500-serial_kludge.patch
new file mode 100644
index 0000000000..0832d32443
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/500-serial_kludge.patch
@@ -0,0 +1,44 @@
+Index: linux-2.6.25.1/drivers/serial/8250.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/serial/8250.c	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/serial/8250.c	2008-05-03 16:25:06.000000000 +0200
+@@ -267,6 +267,13 @@
+ 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ 		.flags		= UART_CAP_FIFO,
+ 	},
++	[PORT_AR7] = {
++		.name		= "TI-AR7",
++		.fifo_size	= 16,
++		.tx_loadsz	= 16,
++		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
++		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
++	},
+ };
+ 
+ #if defined (CONFIG_SERIAL_8250_AU1X00)
+@@ -2455,7 +2462,11 @@
+ {
+ 	struct uart_8250_port *up = (struct uart_8250_port *)port;
+ 
++#ifdef CONFIG_AR7
++	wait_for_xmitr(up, BOTH_EMPTY);
++#else
+ 	wait_for_xmitr(up, UART_LSR_THRE);
++#endif
+ 	serial_out(up, UART_TX, ch);
+ }
+ 
+Index: linux-2.6.25.1/include/linux/serial_core.h
+===================================================================
+--- linux-2.6.25.1.orig/include/linux/serial_core.h	2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/include/linux/serial_core.h	2008-05-03 16:25:06.000000000 +0200
+@@ -40,7 +40,8 @@
+ #define PORT_NS16550A	14
+ #define PORT_XSCALE	15
+ #define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
+-#define PORT_MAX_8250	16	/* max port ID */
++#define PORT_AR7	17
++#define PORT_MAX_8250	17	/* max port ID */
+ 
+ /*
+  * ARM specific type numbers.  These are not currently guaranteed
diff --git a/target/linux/ar7/patches-2.6.25/900-temporary_cpmac_hack.diff b/target/linux/ar7/patches-2.6.25/900-temporary_cpmac_hack.diff
new file mode 100644
index 0000000000..43176f4aeb
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.25/900-temporary_cpmac_hack.diff
@@ -0,0 +1,29 @@
+Index: linux-2.6.25.1/drivers/net/cpmac.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/cpmac.c	2008-05-03 16:24:49.000000000 +0200
++++ linux-2.6.25.1/drivers/net/cpmac.c	2008-05-03 16:25:17.000000000 +0200
+@@ -936,7 +936,8 @@
+ 	int new_state = 0;
+ 
+ 	spin_lock(&priv->lock);
+-	if (priv->phy->link) {
++	if (1 /* priv->phy->link */ ) {
++		netif_carrier_on(dev);
+ 		netif_start_queue(dev);
+ 		if (priv->phy->duplex != priv->oldduplex) {
+ 			new_state = 1;
+@@ -948,11 +949,11 @@
+ 			priv->oldspeed = priv->phy->speed;
+ 		}
+ 
+-		if (!priv->oldlink) {
++		/*if (!priv->oldlink) {
+ 			new_state = 1;
+-			priv->oldlink = 1;
++			priv->oldlink = 1;*/
+ 			netif_schedule(dev);
+-		}
++		/*}*/
+ 	} else if (priv->oldlink) {
+ 		netif_stop_queue(dev);
+ 		new_state = 1;