Put back 2.6.23 files for rdc, allowing to switch from one kernel version to another for testing

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11592 3c298f89-4303-0410-b956-a3cf2f4a3e73
author: florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> 2008-06-28 11:06:32 +0000
committer: florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> 2008-06-28 11:06:32 +0000
commit: be07fabdd80da56125283caf3938b01d01e3b23e (patch)
tree: e6269f94b21d6d6e8d208b55f98cae7c23847a48
parent: e2a5cd999c401b7c6ef69db6df118eece9fecf3a (diff)
22 files changed, 3022 insertions, 0 deletions
diff --git a/target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c b/target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c
new file mode 100644
index 0000000000..f4b9083bfc
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c
@@ -0,0 +1,24 @@
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static struct cpu_dev rdc_cpu_dev __cpuinitdata = {
+        .c_vendor       = "RDC",
+        .c_models = {
+                { .vendor = X86_VENDOR_RDC, .family = 4, .model_names =
+                  {
+                          [0] = "R861x(-G)",
+                  }
+                },
+        },
+};
+
+int __init rdc_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_RDC] = &rdc_cpu_dev;
+        return 0;
+}
diff --git a/target/linux/rdc/files/arch/i386/mach-rdc/Makefile b/target/linux/rdc/files/arch/i386/mach-rdc/Makefile
new file mode 100644
index 0000000000..5961bc7910
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RDC321x specific parts of the kernel
+#
+obj-$(CONFIG_X86_RDC)        := gpio.o platform.o wdt.o
+
diff --git a/target/linux/rdc/files/arch/i386/mach-rdc/gpio.c b/target/linux/rdc/files/arch/i386/mach-rdc/gpio.c
new file mode 100644
index 0000000000..dbd03270f1
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/gpio.c
@@ -0,0 +1,91 @@
+/*
+ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *  	RDC321x architecture specific GPIO support
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <asm/mach-rdc/rdc321x_defs.h>
+
+static inline int rdc_gpio_is_valid(unsigned gpio)
+{
+	return (gpio <= RDC_MAX_GPIO);
+}
+
+static unsigned int rdc_gpio_read(unsigned gpio)
+{
+	unsigned int val;
+
+	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
+        outl(val, RDC3210_CFGREG_ADDR);
+        udelay(10);
+        val = inl(RDC3210_CFGREG_DATA);
+        val |= (0x1 << (gpio & 0x1F));
+        outl(val, RDC3210_CFGREG_DATA);
+        udelay(10);
+        val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
+        outl(val, RDC3210_CFGREG_ADDR);
+        udelay(10);
+        val = inl(RDC3210_CFGREG_DATA);
+
+	return val;
+}
+
+static void rdc_gpio_write(unsigned int val)
+{
+	if (val) {
+		outl(val, RDC3210_CFGREG_DATA);
+		udelay(10);
+	}
+}
+
+int rdc_gpio_get_value(unsigned gpio)
+{
+	if (rdc_gpio_is_valid(gpio))
+		return (int)rdc_gpio_read(gpio);
+	else
+		return -EINVAL;
+}
+EXPORT_SYMBOL(rdc_gpio_get_value);
+
+void rdc_gpio_set_value(unsigned gpio, int value)
+{
+	unsigned int val;
+
+	if (!rdc_gpio_is_valid(gpio))
+		return;
+	
+	val = rdc_gpio_read(gpio);
+
+	if (value)
+		val &= ~(0x1 << (gpio & 0x1F));
+	else
+		val |= (0x1 << (gpio & 0x1F));
+
+	rdc_gpio_write(val);
+}
+EXPORT_SYMBOL(rdc_gpio_set_value);
+
+int rdc_gpio_direction_input(unsigned gpio)
+{
+	return 0;
+}
+EXPORT_SYMBOL(rdc_gpio_direction_input);
+
+int rdc_gpio_direction_output(unsigned gpio, int value)
+{
+	return 0;
+}
+EXPORT_SYMBOL(rdc_gpio_direction_output);
+
+
diff --git a/target/linux/rdc/files/arch/i386/mach-rdc/platform.c b/target/linux/rdc/files/arch/i386/mach-rdc/platform.c
new file mode 100644
index 0000000000..31af6fcc30
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/platform.c
@@ -0,0 +1,114 @@
+/*
+ *  $Id: platform.c 8331 2007-08-03 15:59:23Z florian $
+ *
+ *  Generic RDC321x platform devices
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/version.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/gpio.h>
+
+/* Flash */
+static struct resource rdc_flash_resource[] = {
+	[0] = {
+		.start = (u32)-CONFIG_MTD_RDC3210_SIZE,
+		.end = (u32)-1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rdc_flash_device = {
+	.name = "rdc321x-flash",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rdc_flash_resource),
+	.resource = rdc_flash_resource,
+};
+
+/* LEDS */
+static struct gpio_led default_leds[] = {
+        { .name = "rdc321x:dmz", .gpio = 1, },
+};
+
+static struct gpio_led_platform_data rdc321x_led_data = {
+	.num_leds = ARRAY_SIZE(default_leds),
+	.leds = default_leds,
+};
+
+static struct platform_device rdc321x_leds = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &rdc321x_led_data,
+	}
+};
+
+/* Watchdog */
+static struct platform_device rdc321x_wdt = {
+	.name = "rdc321x-wdt",
+	.id = -1,
+	.num_resources = 0,
+};
+
+/* Button */
+static struct gpio_keys_button rdc321x_gpio_btn[] = {
+	{
+		.gpio = 0,
+		.code = BTN_0,
+		.desc = "Reset",
+		.active_low = 1,
+	}
+};
+
+static struct gpio_keys_platform_data rdc321x_gpio_btn_data = {
+	.buttons = rdc321x_gpio_btn,
+	.nbuttons = ARRAY_SIZE(rdc321x_gpio_btn),
+};
+
+static struct platform_device rdc321x_button = {
+	.name = "gpio-keys",
+	.id = -1,
+	.dev = {
+		.platform_data = &rdc321x_gpio_btn_data,
+	}
+};
+
+static struct platform_device *rdc321x_devs[] = {
+	&rdc_flash_device,
+	&rdc321x_leds,
+	&rdc321x_wdt,
+	&rdc321x_button
+};
+
+static int __init rdc_board_setup(void)
+{
+	return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
+}
+
+arch_initcall(rdc_board_setup);
diff --git a/target/linux/rdc/files/arch/i386/mach-rdc/setup.c b/target/linux/rdc/files/arch/i386/mach-rdc/setup.c
new file mode 100644
index 0000000000..ad206c3d05
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/setup.c
@@ -0,0 +1,14 @@
+/*
+ *	Machine specific setup for generic
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/arch_hooks.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+char * __init machine_specific_memory_setup(void)
+{
+	return "RDC R-321x";
+}
diff --git a/target/linux/rdc/files/arch/i386/mach-rdc/wdt.c b/target/linux/rdc/files/arch/i386/mach-rdc/wdt.c
new file mode 100644
index 0000000000..13b69f68ab
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/wdt.c
@@ -0,0 +1,272 @@
+/*
+ * RDC321x watchdog driver
+ *
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This driver is highly inspired from the cpu5_wdt driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include <asm/mach-rdc/rdc321x_defs.h>
+
+#define RDC_WDT_MASK		0x80000000	/* Mask */
+#define RDC_WDT_EN		0x00800000 	/* Enable bit */
+#define RDC_WDT_WTI		0x00200000	/* Generate a CPU reset/NMI/WDT irq when WDT timeout is reached */
+#define RDC_WDT_RST		0x00100000	/* Reset bit */
+#define RDC_WDT_WIF		0x00040000	/* WDT IRQ Flag */
+#define RDC_WDT_IRT		0x00000100	/* IRQ Routing table */
+#define RDC_WDT_CNT		0x00000001	/* WDT count */
+
+#define RDC_CLS_TMR		0x80003844	/* Clear timer */
+
+#define RDC_WDT_INTERVAL	(HZ/10+1)
+
+int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int ticks = 1000;
+
+/* some device data */
+
+static struct {
+	struct completion stop;
+	volatile int running;
+	struct timer_list timer;
+	volatile int queue;
+	int default_ticks;
+	unsigned long inuse;
+} rdc321x_wdt_device;
+
+/* generic helper functions */
+
+static void rdc321x_wdt_trigger(unsigned long unused)
+{
+	if( rdc321x_wdt_device.running )
+		ticks--;
+
+	/* keep watchdog alive */
+	outl(RDC_WDT_EN|inl(RDC3210_CFGREG_DATA), RDC3210_CFGREG_DATA);	
+	
+	/* requeue?? */
+	if (rdc321x_wdt_device.queue && ticks)
+		mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
+	else {
+		/* ticks doesn't matter anyway */
+		complete(&rdc321x_wdt_device.stop);
+	}
+
+}
+
+static void rdc321x_wdt_reset(void)
+{
+	ticks = rdc321x_wdt_device.default_ticks;
+}
+
+static void rdc321x_wdt_start(void)
+{
+	if (!rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 1;
+
+		/* Clear the timer */
+		outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
+		
+		/* Enable watchdog and set the timeout to 81.92 us */
+		outl(RDC_WDT_EN|RDC_WDT_CNT, RDC3210_CFGREG_DATA);
+
+		mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
+	}
+
+	/* if process dies, counter is not decremented */
+	rdc321x_wdt_device.running++;
+}
+
+static int rdc321x_wdt_stop(void)
+{
+	if (rdc321x_wdt_device.running)
+		rdc321x_wdt_device.running = 0;
+
+	ticks = rdc321x_wdt_device.default_ticks;
+
+	return -EIO;
+}
+
+/* filesystem operations */
+
+static int rdc321x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
+		return -EBUSY;
+
+	return nonseekable_open(inode, file);
+}
+
+static int rdc321x_wdt_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+	return 0;
+}
+
+static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	unsigned int value;
+	static struct watchdog_info ident =
+	{
+		.options = WDIOF_CARDRESET,
+		.identity = "RDC321x WDT",
+	};
+
+	switch(cmd) {
+		case WDIOC_KEEPALIVE:
+			rdc321x_wdt_reset();
+			break;
+		case WDIOC_GETSTATUS:
+			/* Read the value from the DATA register */
+			value = inl(RDC3210_CFGREG_DATA);
+			if ( copy_to_user(argp, &value, sizeof(int)) )
+				return -EFAULT;
+			break;
+		case WDIOC_GETSUPPORT:
+			if ( copy_to_user(argp, &ident, sizeof(ident)) )
+				return -EFAULT;
+			break;
+		case WDIOC_SETOPTIONS:
+			if ( copy_from_user(&value, argp, sizeof(int)) )
+				return -EFAULT;
+			switch(value) {
+				case WDIOS_ENABLECARD:
+					rdc321x_wdt_start();
+					break;
+				case WDIOS_DISABLECARD:
+					return rdc321x_wdt_stop();
+				default:
+					return -EINVAL;
+			}
+			break;
+		default:
+    			return -ENOTTY;
+	}
+	return 0;
+}
+
+static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+{
+	if ( !count )
+		return -EIO;
+
+	rdc321x_wdt_reset();
+
+	return count;
+}
+
+static const struct file_operations rdc321x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.ioctl		= rdc321x_wdt_ioctl,
+	.open		= rdc321x_wdt_open,
+	.write		= rdc321x_wdt_write,
+	.release	= rdc321x_wdt_release,
+};
+
+static struct miscdevice rdc321x_wdt_misc = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rdc321x_wdt_fops,
+};
+
+static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
+{
+	int err;
+
+	if ( (err = misc_register(&rdc321x_wdt_misc)) < 0 ) {
+		printk(KERN_ERR PFX "misc_register failed\n");
+		return err;
+	}
+
+	/* Reset the watchdog */
+	outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
+
+	init_completion(&rdc321x_wdt_device.stop);
+	rdc321x_wdt_device.queue = 0;
+
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+
+	setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
+
+	rdc321x_wdt_device.default_ticks = ticks;
+
+	printk(KERN_INFO PFX "init success\n");
+
+	return 0;
+}
+
+static int rdc321x_wdt_remove(struct platform_device *pdev)
+{
+	if (rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 0;
+		wait_for_completion(&rdc321x_wdt_device.stop);
+	}
+
+	misc_deregister(&rdc321x_wdt_misc);
+
+	return 0;
+}
+
+static struct platform_driver rdc321x_wdt_driver = {
+	.probe = rdc321x_wdt_probe,
+	.remove = rdc321x_wdt_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "rdc321x-wdt",
+	},
+};
+
+static int __init rdc321x_wdt_init(void)
+{
+	return platform_driver_register(&rdc321x_wdt_driver);
+}
+
+static void __exit rdc321x_wdt_exit(void)
+{
+	platform_driver_unregister(&rdc321x_wdt_driver);
+}
+
+module_init(rdc321x_wdt_init);
+module_exit(rdc321x_wdt_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/rdc/files/include/asm-i386/gpio.h b/target/linux/rdc/files/include/asm-i386/gpio.h
new file mode 100644
index 0000000000..ff87fca0ca
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-i386/gpio.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_I386_GPIO_H
+#define _ASM_I386_GPIO_H
+
+#include <gpio.h>
+
+#endif /* _ASM_I386_GPIO_H */
diff --git a/target/linux/rdc/files/include/asm-i386/mach-generic/gpio.h b/target/linux/rdc/files/include/asm-i386/mach-generic/gpio.h
new file mode 100644
index 0000000000..5305dcb96d
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-i386/mach-generic/gpio.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MACH_GENERIC_GPIO_H
+#define __ASM_MACH_GENERIC_GPIO_H
+
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h>           /* cansleep wrappers */
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */
diff --git a/target/linux/rdc/files/include/asm-i386/mach-rdc/gpio.h b/target/linux/rdc/files/include/asm-i386/mach-rdc/gpio.h
new file mode 100644
index 0000000000..2368bd7583
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-i386/mach-rdc/gpio.h
@@ -0,0 +1,56 @@
+#ifndef _RDC_GPIO_H
+#define _RDC_GPIO_H
+
+extern int rdc_gpio_get_value(unsigned gpio);
+extern void rdc_gpio_set_value(unsigned gpio, int value);
+extern int rdc_gpio_direction_input(unsigned gpio);
+extern int rdc_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+        /* Not yet implemented */
+        return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+        /* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+        return rdc_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+        return rdc_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+        return rdc_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+        rdc_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+        return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+        return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _RDC_GPIO_H_ */
diff --git a/target/linux/rdc/files/include/asm-i386/mach-rdc/rdc321x_defs.h b/target/linux/rdc/files/include/asm-i386/mach-rdc/rdc321x_defs.h
new file mode 100644
index 0000000000..838ba8f64f
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-i386/mach-rdc/rdc321x_defs.h
@@ -0,0 +1,6 @@
+#define PFX	"rdc321x: "
+
+/* General purpose configuration and data registers */
+#define RDC3210_CFGREG_ADDR     0x0CF8
+#define RDC3210_CFGREG_DATA     0x0CFC
+#define RDC_MAX_GPIO		0x3A
diff --git a/target/linux/rdc/files/include/asm-x86/gpio.h b/target/linux/rdc/files/include/asm-x86/gpio.h
new file mode 100644
index 0000000000..ff87fca0ca
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-x86/gpio.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_I386_GPIO_H
+#define _ASM_I386_GPIO_H
+
+#include <gpio.h>
+
+#endif /* _ASM_I386_GPIO_H */
diff --git a/target/linux/rdc/files/include/asm-x86/mach-generic/gpio.h b/target/linux/rdc/files/include/asm-x86/mach-generic/gpio.h
new file mode 100644
index 0000000000..5305dcb96d
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-x86/mach-generic/gpio.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MACH_GENERIC_GPIO_H
+#define __ASM_MACH_GENERIC_GPIO_H
+
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h>           /* cansleep wrappers */
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */
diff --git a/target/linux/rdc/files/include/asm-x86/mach-rdc/gpio.h b/target/linux/rdc/files/include/asm-x86/mach-rdc/gpio.h
new file mode 100644
index 0000000000..2368bd7583
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-x86/mach-rdc/gpio.h
@@ -0,0 +1,56 @@
+#ifndef _RDC_GPIO_H
+#define _RDC_GPIO_H
+
+extern int rdc_gpio_get_value(unsigned gpio);
+extern void rdc_gpio_set_value(unsigned gpio, int value);
+extern int rdc_gpio_direction_input(unsigned gpio);
+extern int rdc_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+        /* Not yet implemented */
+        return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+        /* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+        return rdc_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+        return rdc_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+        return rdc_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+        rdc_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+        return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+        return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _RDC_GPIO_H_ */
diff --git a/target/linux/rdc/files/include/asm-x86/mach-rdc/rdc321x_defs.h b/target/linux/rdc/files/include/asm-x86/mach-rdc/rdc321x_defs.h
new file mode 100644
index 0000000000..838ba8f64f
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-x86/mach-rdc/rdc321x_defs.h
@@ -0,0 +1,6 @@
+#define PFX	"rdc321x: "
+
+/* General purpose configuration and data registers */
+#define RDC3210_CFGREG_ADDR     0x0CF8
+#define RDC3210_CFGREG_DATA     0x0CFC
+#define RDC_MAX_GPIO		0x3A
diff --git a/target/linux/rdc/patches-2.6.23/001-rdc3210_flash_map.patch b/target/linux/rdc/patches-2.6.23/001-rdc3210_flash_map.patch
new file mode 100644
index 0000000000..0c407a114a
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.23/001-rdc3210_flash_map.patch
@@ -0,0 +1,65 @@
+diff -urN linux-2.6.17/drivers/mtd/maps/Kconfig linux-2.6.17.new/drivers/mtd/maps/Kconfig
+--- linux-2.6.17/drivers/mtd/maps/Kconfig	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17.new/drivers/mtd/maps/Kconfig	2006-09-24 20:28:11.000000000 +0200
+@@ -76,6 +76,50 @@
+ 	  PNC-2000 is the name of Network Camera product from PHOTRON
+ 	  Ltd. in Japan. It uses CFI-compliant flash.
+ 
++config MTD_RDC3210
++	tristate "CFI Flash device mapped on RDC3210"
++	depends on X86 && MTD_CFI && MTD_PARTITIONS
++	help
++	  RDC-3210 is the flash device we find on Ralink reference board.
++
++config MTD_RDC3210_STATIC_MAP
++	bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
++	select MTD_RDC3210_FACTORY_PRESENT
++	help
++	  The mapping driver will use the static partition map for the
++	  RDC-3210 flash device.
++
++config MTD_RDC3210_FACTORY_PRESENT
++	bool "Reserve a partition on RDC3210 for factory presets"
++	depends on MTD_RDC3210
++	default y
++	help
++	  The mapping driver will reserve a partition on the RDC-3210 flash
++	  device for resetting flash contents to factory defaults.
++
++config MTD_RDC3210_ALLOW_JFFS2
++	bool "JFFS2 filesystem usable in a partition on RDC3210"
++	depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
++	help
++	  The mapping driver will align a partition on the RDC-3210 flash
++	  device to an erase-block boundary so that a JFFS2 filesystem may
++	  reside on it.
++
++config MTD_RDC3210_SIZE
++	hex "Amount of flash memory on RDC3210"
++	depends on MTD_RDC3210
++	default "0x400000"
++	help
++	  Total size in bytes of the RDC-3210 flash device
++
++config MTD_RDC3210_BUSWIDTH
++	int "Width of CFI Flash device mapped on RDC3210"
++	depends on MTD_RDC3210
++	default "2"
++	help
++	  Number of bytes addressed on the RDC-3210 flash device before
++	  addressing the same chip again
++
+ config MTD_SC520CDP
+ 	tristate "CFI Flash device mapped on AMD SC520 CDP"
+ 	depends on X86 && MTD_CFI && MTD_CONCAT
+diff -urN linux-2.6.17/drivers/mtd/maps/Makefile linux-2.6.17.new/drivers/mtd/maps/Makefile
+--- linux-2.6.17/drivers/mtd/maps/Makefile	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17.new/drivers/mtd/maps/Makefile	2006-09-24 20:26:10.000000000 +0200
+@@ -28,6 +28,7 @@
+ obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
+ obj-$(CONFIG_MTD_PNC2000)	+= pnc2000.o
+ obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
++obj-$(CONFIG_MTD_RDC3210)	+= rdc3210.o
+ obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
+ obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
diff --git a/target/linux/rdc/patches-2.6.23/001-x86_generic_gpio.patch b/target/linux/rdc/patches-2.6.23/001-x86_generic_gpio.patch
new file mode 100644
index 0000000000..db3d866a1b
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.23/001-x86_generic_gpio.patch
@@ -0,0 +1,15 @@
+diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
+index 97b64d7..f8c1d32 100644
+--- a/arch/i386/Kconfig
++++ b/arch/i386/Kconfig
+@@ -79,6 +79,10 @@ config GENERIC_BUG
+        default y
+        depends on BUG
+
++config GENERIC_GPIO
++       bool
++       default n
++
+ config GENERIC_HWEIGHT
+        bool
+        default y
diff --git a/target/linux/rdc/patches-2.6.23/002-r6040_ethernet.patch b/target/linux/rdc/patches-2.6.23/002-r6040_ethernet.patch
new file mode 100644
index 0000000000..8ff6af1c7e
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.23/002-r6040_ethernet.patch
@@ -0,0 +1,1090 @@
+diff -urN linux-2.6.17/drivers/net/Kconfig linux-2.6.17.new/drivers/net/Kconfig
+--- linux-2.6.17/drivers/net/Kconfig	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17.new/drivers/net/Kconfig	2006-09-25 13:14:27.000000000 +0200
+@@ -1358,6 +1358,24 @@
+ 	  <file:Documentation/networking/net-modules.txt>.  The module will be
+ 	  called apricot.
+ 
++config R6040
++	tristate "RDC Fast-Ethernet support (EXPERIMENTAL)"
++	depends on NET_PCI && EXPERIMENTAL
++	select MII
++	help
++	  If you have a network (Ethernet) controller of this type, say Y and
++	  read the Ethernet-HOWTO, available from
++          <http://www.tldp.org/docs.html#howto>.
++
++          To compile this driver as a module, choose M here and read
++          <file:Documentation/networking/net-modules.txt>.  The module will be
++          called r6040.
++
++
++config R6040_NAPI
++	bool "NAPI support for R6040"
++	depends on R6040
++	default y
+ config B44
+ 	tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
+ 	depends on NET_PCI && PCI && EXPERIMENTAL
+diff -urN linux-2.6.17/drivers/net/Makefile linux-2.6.17.new/drivers/net/Makefile
+--- linux-2.6.17/drivers/net/Makefile	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17.new/drivers/net/Makefile	2006-09-25 13:14:45.000000000 +0200
+@@ -106,6 +106,7 @@
+ obj-$(CONFIG_NE3210) += ne3210.o 8390.o
+ obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
+ obj-$(CONFIG_B44) += b44.o
++obj-$(CONFIG_R6040) += r6040.o
+ obj-$(CONFIG_FORCEDETH) += forcedeth.o
+ obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+diff -urN linux-2.6.23/drivers/net/r6040.c linux-2.6.23.new/drivers/net/r6040.c
+--- linux-2.6.23/drivers/net/r6040.c	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.23.new/drivers/net/r6040.c	2006-09-25 13:14:45.000000000 +0200
+@@ -0,0 +1,1048 @@
++/* r6040.c: A RDC R6040 FastEthernet driver for linux. */
++/*
++	Re-written 2004 by Sten Wang.
++
++	Copyright 1994-2000 by Donald Becker.
++	Copyright 1993 United States Government as represented by the
++	Director, National Security Agency.	 This software may be used and
++	distributed according to the terms of the GNU General Public License,
++	incorporated herein by reference.
++
++	This driver is for RDC R6040 FastEthernet MAC series.
++	For kernel version after 2.4.22
++
++	Modification List
++	----------	------------------------------------------------
++	10-07-2007	Clean up the driver using checkpatch
++	08-24-2006	Support at linux 2.6.10 above
++	03-24-2006	Support NAPI
++	03-21-2006	By Charies,change spin_lock_irqsave(lp->lock, flags) 
++			to spin_lock_irqsave(&lp->lock, flags)
++			in set_multicast_list
++	03-15-2006      Modify the set_multicast_list ,due to when re-plug the ethernet,
++			it will forget the previous setting
++	07-12-2005	Tim, modify the set_multicast_list
++	03-28-2005	Tim, modify some error mac register offset in 
++			function set_multicast_list
++	03-27-2005	Tim, Add the internal state machine reset
++			Sten, If multicast address more than 4, enter PROM mode
++			Changed rdc to r6040
++	12-22-2004	Sten Init MAC MBCR register=0x012A
++			PHY_CAP = 0x01E1
++
++	Need to Do LIst:
++	1. If multicast address more than 4, use the multicast address hash
++*/
++
++#define DRV_NAME	"r6040"
++#define DRV_VERSION	"0.13"
++#define DRV_RELDATE	"24Aug2006"
++
++/* PHY CHIP Address */
++#define PHY1_ADDR	1	/* For MAC1 */
++#define PHY2_ADDR	2	/* For MAC2 */
++#define PHY_MODE	0x3100	/* PHY CHIP Register 0 */
++#define PHY_CAP		0x01E1	/* PHY CHIP Register 4 */
++
++/* Time in jiffies before concluding the transmitter is hung. */
++#define TX_TIMEOUT  	(6000 * HZ / 1000)
++#define TIMER_WUT	(jiffies + HZ * 1)/* timer wakeup time : 1 second */
++
++/* RDC MAC ID */
++#define RDC_MAC_ID	0x6040
++
++/* RDC MAC I/O Size */
++#define R6040_IO_SIZE	256
++
++/* RDC Chip PCI Command */
++#define R6040_PCI_CMD	0x0005	/* IO, Master */
++
++/* MAX RDC MAC */
++#define MAX_MAC		2
++
++/* MAC setting */
++#define TX_DCNT		0x80	/* TX descriptor count */
++#define RX_DCNT		0x80	/* RX descriptor count */
++#define MAX_BUF_SIZE	0x600
++#define ALLOC_DESC_SIZE	((TX_DCNT+RX_DCNT)*sizeof(struct r6040_descriptor)+0x10)
++#define MBCR_DEFAULT	0x012A	/* MAC Bus Control Register */
++
++/* PHY settings */
++#define ICPLUS_PHY_ID	0x0243
++
++/* Debug enable or not */
++#define RDC_DEBUG	0
++
++#if RDC_DEBUG > 1
++#define RDC_DBUG(msg, value) printk(KERN_ERR "%s %x\n", msg, value);
++#else
++#define RDC_DBUG(msg, value)
++#endif
++
++
++#include <linux/module.h>
++#include <linux/version.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
++#include <linux/moduleparam.h>
++#endif
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/timer.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/pci.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mii.h>
++#include <linux/ethtool.h>
++#include <linux/crc32.h>
++#include <linux/spinlock.h>
++
++#include <asm/processor.h>
++#include <asm/bitops.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/uaccess.h>
++
++MODULE_AUTHOR("Sten Wang <sten.wang@rdc.com.tw>, Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>, Florian Fainelli <florian@openwrt.org>");
++MODULE_LICENSE("GPL");
++#ifdef CONFIG_R6040_NAPI
++MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet Driver");
++#else
++MODULE_DESCRIPTION("RDC R6040 PCI FastEthernet Driver");
++#endif
++
++#define R6040_INT_MASK			0x0011
++
++struct r6040_descriptor {
++	u16	status, len;		/* 0-3 */
++	u32	buf;			/* 4-7 */
++	u32	ndesc;			/* 8-B */
++	u32	rev1;			/* C-F */
++	char	*vbufp;			/* 10-13 */
++	struct r6040_descriptor *vndescp;	/* 14-17 */
++	struct sk_buff *skb_ptr;	/* 18-1B */
++	u32	rev2;			/* 1C-1F */
++} __attribute__((aligned(32)));
++
++struct r6040_private {
++	struct net_device_stats stats;
++	spinlock_t lock;		/* driver lock */
++	struct timer_list timer;
++	struct pci_dev *pdev;
++
++	struct r6040_descriptor *rx_insert_ptr;
++	struct r6040_descriptor *rx_remove_ptr;
++	struct r6040_descriptor *tx_insert_ptr;
++	struct r6040_descriptor *tx_remove_ptr;
++	u16	tx_free_desc, rx_free_desc, phy_addr, phy_mode;
++	u16	mcr0, mcr1;
++	dma_addr_t desc_dma;
++	char	*desc_pool;
++	u16	switch_sig;
++};
++
++struct r6040_chip_info {
++	const char *name;
++	u16 pci_flags;
++	int io_size;
++	int drv_flags;
++};
++
++#ifdef CONFIG_R6040_NAPI
++static int NAPI_status;
++#endif
++
++static int __devinitdata printed_version;
++#ifdef CONFIG_R6040_NAPI
++static char version[] __devinitdata =
++	KERN_INFO DRV_NAME ": RDC R6040 NAPI net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n";
++#else
++static char version[] __devinitdata =
++	KERN_INFO DRV_NAME ": RDC R6040 net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n";
++#endif
++static struct r6040_chip_info r6040_chip_info[] __devinitdata =
++{
++	{ "RDC R6040 Knight", R6040_PCI_CMD, R6040_IO_SIZE, 0}
++};
++static char *parent;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
++static int NUM_MAC_TABLE = 2 ;
++module_param(parent, charp, 0444);
++#else
++MODULE_PARM(parent, "s");
++#endif
++MODULE_PARM_DESC(parent, "Parent network device name");
++
++static int phy_table[] = { 0x1, 0x2};
++static u8 adr_table[2][8] = {
++	{0x00, 0x00, 0x60, 0x00, 0x00, 0x01},
++	{0x00, 0x00, 0x60, 0x00, 0x00, 0x02}
++};
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
++	module_param_array(adr_table, int, &NUM_MAC_TABLE, 0644);
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
++	module_param_array(adr_table, int, NUM_MAC_TABLE, 0644);
++#else
++	MODULE_PARM(adr_table, "2-4i");
++#endif
++MODULE_PARM_DESC(adr_table, "MAC Address (assigned)");
++
++static int r6040_open(struct net_device *dev);
++static int r6040_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static irqreturn_t r6040_interrupt(int irq, void *dev_id);
++static struct net_device_stats *r6040_get_stats(struct net_device *dev);
++static int r6040_close(struct net_device *dev);
++static void set_multicast_list(struct net_device *dev);
++static struct ethtool_ops netdev_ethtool_ops;
++static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
++static void r6040_down(struct net_device *dev);
++static void r6040_up(struct net_device *dev);
++static void r6040_tx_timeout (struct net_device *dev);
++static void r6040_timer(unsigned long);
++
++static int phy_mode_chk(struct net_device *dev);
++static int phy_read(int ioaddr, int phy_adr, int reg_idx);
++static void phy_write(int ioaddr, int phy_adr, int reg_idx, int dat);
++static void rx_buf_alloc(struct r6040_private *lp, struct net_device *dev);
++#ifdef CONFIG_R6040_NAPI
++static int r6040_poll(struct net_device *netdev, int *budget);
++#endif
++
++
++static int __devinit r6040_init_one (struct pci_dev *pdev,
++					 const struct pci_device_id *ent)
++{
++	struct net_device *dev;
++	struct r6040_private *lp;
++	int ioaddr, io_size, err;
++	static int card_idx = -1;
++	int chip_id = (int)ent->driver_data;
++
++	RDC_DBUG("r6040_init_one()", 0);
++
++	if (printed_version++)
++		printk(KERN_INFO "%s\n", version);
++
++	err = pci_enable_device(pdev);
++	if (err)
++		return err;
++
++	/* this should always be supported */
++	if (pci_set_dma_mask(pdev, 0xffffffff)) {
++		printk(KERN_ERR DRV_NAME "32-bit PCI DMA addresses not supported by the card!?\n");
++		return  -ENODEV;
++	}
++
++	/* IO Size check */
++	io_size = r6040_chip_info[chip_id].io_size;
++	if (pci_resource_len  (pdev, 0) < io_size) {
++		return  -ENODEV;
++	}
++
++	ioaddr = pci_resource_start (pdev, 0);	/* IO map base address */
++	pci_set_master(pdev);
++
++	dev = alloc_etherdev(sizeof(struct r6040_private));
++	if (dev == NULL)
++		return -ENOMEM;
++	SET_MODULE_OWNER(dev);
++
++	if (pci_request_regions(pdev, DRV_NAME)) {
++		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
++		err = -ENODEV;
++		goto err_out_disable;
++	}
++
++	/* Init system & device */
++	lp = dev->priv;
++	dev->base_addr = ioaddr;
++	dev->irq = pdev->irq;
++
++	spin_lock_init(&lp->lock);
++	pci_set_drvdata(pdev, dev);
++
++	/* Set MAC address */
++	card_idx++;
++	memcpy(dev->dev_addr, (u8 *)&adr_table[card_idx][0], 6);
++
++	/* Link new device into r6040_root_dev */
++	lp->pdev = pdev;
++
++	/* Init RDC private data */
++	lp->mcr0 = 0x1002;
++	lp->phy_addr = phy_table[card_idx];
++	lp->switch_sig = 0;
++
++	/* The RDC-specific entries in the device structure. */
++	dev->open = &r6040_open;
++	dev->hard_start_xmit = &r6040_start_xmit;
++	dev->stop = &r6040_close;
++	dev->get_stats = &r6040_get_stats;
++	dev->set_multicast_list = &set_multicast_list;
++	dev->do_ioctl = &netdev_ioctl;
++	dev->ethtool_ops = &netdev_ethtool_ops;
++	dev->tx_timeout = &r6040_tx_timeout;
++	dev->watchdog_timeo = TX_TIMEOUT;
++#ifdef CONFIG_R6040_NAPI
++	dev->poll = &r6040_poll;
++	dev->weight = 64;
++#endif
++
++	/* Register net device. After this dev->name assign */
++	err = register_netdev(dev);
++	if (err) {
++		printk(KERN_ERR DRV_NAME ": Failed to register net device\n");
++		goto err_out_res;
++	}
++
++	netif_carrier_on(dev);
++	return 0;
++
++err_out_res:
++	pci_release_regions(pdev);
++err_out_disable:
++	pci_disable_device(pdev);
++	pci_set_drvdata(pdev, NULL);
++	kfree(dev);
++
++	return err;
++}
++
++static void __devexit r6040_remove_one (struct pci_dev *pdev)
++{
++	struct net_device *dev = pci_get_drvdata(pdev);
++	
++	unregister_netdev(dev);
++	pci_release_regions(pdev);
++	kfree(dev);
++	pci_disable_device(pdev);
++	pci_set_drvdata(pdev, NULL);
++}
++
++static int
++r6040_open(struct net_device *dev)
++{
++	struct r6040_private *lp = dev->priv;
++	int i;
++
++	RDC_DBUG("r6040_open()", 0);
++
++	/* Request IRQ and Register interrupt handler */
++	i = request_irq(dev->irq, &r6040_interrupt, SA_SHIRQ, dev->name, dev);
++	if (i) return i;
++
++	/* Allocate Descriptor memory */
++	lp->desc_pool = pci_alloc_consistent(lp->pdev, ALLOC_DESC_SIZE, &lp->desc_dma);
++	if (!lp->desc_pool)
++		return -ENOMEM;
++
++	r6040_up(dev);
++
++	netif_start_queue(dev);
++
++	if (lp->switch_sig != ICPLUS_PHY_ID) {
++		/* set and active a timer process */
++		init_timer(&lp->timer);
++		lp->timer.expires = TIMER_WUT;
++		lp->timer.data = (unsigned long)dev;
++		lp->timer.function = &r6040_timer;
++		add_timer(&lp->timer);
++	}
++	return 0;
++}
++
++static void
++r6040_tx_timeout (struct net_device *dev)
++{
++	struct r6040_private *lp = dev->priv;
++	/* int ioaddr = dev->base_addr;
++	struct r6040_descriptor *descptr = lp->tx_remove_ptr; */
++
++	RDC_DBUG("r6040_tx_timeout()", 0);
++
++	/* Transmitter timeout, serious problems. */
++	/* Sten: Nothing need to do so far. */
++	printk(KERN_ERR DRV_NAME ": Big Trobule, transmit timeout/n");
++	lp->stats.tx_errors++;
++	netif_stop_queue(dev);
++
++//printk("<RDC> XMT timedout: CR0 %x, CR40 %x, CR3C %x, CR2C %x, CR30 %x, CR34 %x, CR38 %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c), inw(ioaddr+0x2c), inw(ioaddr+0x30), inw(ioaddr+0x34), inw(ioaddr+0x38));
++
++//printk("<RDC> XMT_TO: %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
++}
++
++
++static int
++r6040_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct r6040_private *lp = dev->priv;
++	struct r6040_descriptor *descptr;
++	int ioaddr = dev->base_addr;
++	unsigned long flags;
++
++	RDC_DBUG("r6040_start_xmit()", 0);
++
++	if (skb == NULL)	/* NULL skb directly return */
++		return 0;
++	if (skb->len >= MAX_BUF_SIZE) {	/* Packet too long, drop it */
++		dev_kfree_skb(skb);
++		return 0;
++	}
++
++	/* Critical Section */
++	spin_lock_irqsave(&lp->lock, flags);
++
++	/* TX resource check */
++	if (!lp->tx_free_desc) { 
++		spin_unlock_irqrestore(&lp->lock, flags);
++		printk(KERN_ERR DRV_NAME ": NO TX DESC ");
++		return 1;
++	}
++
++	/* Statistic Counter */
++	lp->stats.tx_packets++;
++	lp->stats.tx_bytes += skb->len;
++	
++	/* Set TX descriptor & Transmit it */
++	lp->tx_free_desc--;
++	descptr = lp->tx_insert_ptr;
++	if (skb->len < 0x3c)
++		descptr->len = 0x3c;
++	else
++		descptr->len = skb->len;
++
++	descptr->skb_ptr = skb;
++	descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, skb->data, skb->len, PCI_DMA_TODEVICE));
++	descptr->status = 0x8000;
++	outw(0x01, ioaddr + 0x14);
++	lp->tx_insert_ptr = descptr->vndescp;
++
++#if RDC_DEBUG
++ printk("Xmit(): %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
++#endif
++
++	/* If no tx resource, stop */
++	if (!lp->tx_free_desc) 
++		netif_stop_queue(dev);
++
++	dev->trans_start = jiffies;
++	spin_unlock_irqrestore(&lp->lock, flags);
++	return 0;
++}
++
++/* The RDC interrupt handler. */
++static irqreturn_t
++r6040_interrupt(int irq, void *dev_id)
++{
++	struct net_device *dev = dev_id;
++	struct r6040_private *lp;
++	struct r6040_descriptor *descptr;
++	struct sk_buff *skb_ptr;
++	int ioaddr, status;
++	unsigned long flags;
++#ifdef CONFIG_R6040_NAPI
++	int handled = 1;
++#else
++	int handled = 0;
++#endif
++
++	RDC_DBUG("r6040_interrupt()", 0);
++	if (dev == NULL) {
++		printk (KERN_ERR DRV_NAME ": INT() unknown device.\n");
++		return IRQ_RETVAL(handled);
++	}
++
++	lp = (struct r6040_private *)dev->priv;
++	spin_lock_irqsave(&lp->lock, flags);
++
++	/* Check MAC Interrupt status */
++	ioaddr = dev->base_addr;
++	outw(0x0, ioaddr + 0x40);	/* Mask Off RDC MAC interrupt */
++	status = inw(ioaddr + 0x3c);	/* Read INTR status and clear */
++	
++
++#ifdef CONFIG_R6040_NAPI
++	if (netif_rx_schedule_prep(dev)) {
++	    	NAPI_status = status;
++		__netif_rx_schedule(dev);
++	}
++
++	spin_unlock_irqrestore(&lp->lock, flags);
++	return IRQ_RETVAL(handled);
++#else		
++	/* TX interrupt request */
++	if (status & 0x10) {
++		handled = 1;
++		descptr = lp->tx_remove_ptr;
++		while (lp->tx_free_desc < TX_DCNT) {
++			if (descptr->status & 0x8000)
++				break; /* Not complte */
++			skb_ptr = descptr->skb_ptr;
++			pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE);
++			dev_kfree_skb_irq(skb_ptr); /* Free buffer */
++			descptr->skb_ptr = 0;
++			descptr = descptr->vndescp; /* To next descriptor */
++			lp->tx_free_desc++;
++		}
++		lp->tx_remove_ptr = descptr;
++		if (lp->tx_free_desc)
++			netif_wake_queue(dev);
++	} 
++
++	/* RX interrupt request */
++	if (status & 0x01) {
++		handled = 1;
++		descptr = lp->rx_remove_ptr;
++		while(lp->rx_free_desc) {
++			if (descptr->status & 0x8000) break; /* No Rx packet */
++			skb_ptr = descptr->skb_ptr;
++			descptr->skb_ptr = 0;
++			skb_ptr->dev = dev;
++			skb_put(skb_ptr, descptr->len - 4);
++			pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
++             		skb_ptr->protocol = eth_type_trans(skb_ptr, dev);
++             		netif_rx(skb_ptr);  /* Send to upper layer */
++			lp->stats.rx_packets++;
++			lp->stats.rx_bytes += descptr->len;
++			descptr = descptr->vndescp; /* To next descriptor */
++			lp->rx_free_desc--;
++		}
++		lp->rx_remove_ptr = descptr;
++	}
++
++	/* Allocate new RX buffer */
++	if (lp->rx_free_desc < RX_DCNT) rx_buf_alloc(lp,dev);
++
++	outw(R6040_INT_MASK, ioaddr + 0x40);	/* TX/RX interrupt enable */
++	spin_unlock_irqrestore(&lp->lock, flags);
++#endif
++	return IRQ_RETVAL(handled);
++}
++
++
++static struct net_device_stats *
++r6040_get_stats(struct net_device *dev)
++{
++	struct r6040_private *lp = dev->priv;
++
++	RDC_DBUG("r6040_get_stats()", 0);
++	return &lp->stats;
++}
++
++/*
++ *     Set or clear the multicast filter for this adaptor.
++ */
++static void
++set_multicast_list(struct net_device *dev)
++{
++	struct r6040_private *lp = dev->priv;
++	struct dev_mc_list *mcptr;
++	int ioaddr = dev->base_addr;
++	u16 *adrp, i;
++	unsigned long flags;
++
++	RDC_DBUG("set_multicast_list()", 0);
++
++	/* MAC Address */
++	adrp = (u16 *) dev->dev_addr;
++	outw(adrp[0], ioaddr + 0x68);
++	outw(adrp[1], ioaddr + 0x6A);
++	outw(adrp[2], ioaddr + 0x6C);
++
++
++#if RDC_DEBUG
++	printk("MAC ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]);
++#endif
++
++	/* Promiscous Mode */
++	spin_lock_irqsave(&lp->lock, flags);
++	i = inw(ioaddr) & ~0x0120;		/* Clear AMCP & PROM */
++	if (dev->flags & IFF_PROMISC) {
++		i |= 0x0020;
++		lp->mcr0 |= 0x0020;
++	}
++	if (dev->mc_count > 4)
++		i |= 0x0020;	/* Too many multicast address */
++
++	outw(i, ioaddr);
++	spin_unlock_irqrestore(&lp->lock, flags);
++	
++	/* Multicast Address */
++	if (dev->mc_count > 4)	/* Wait to do: Hash Table for multicast */
++		return;
++
++	/* Multicast Address 1~4 case */
++	for (i = 0, mcptr = dev->mc_list; (i < dev->mc_count) && (i < 4); i++) {
++		adrp = (u16 *)mcptr->dmi_addr;
++		outw(adrp[0], ioaddr + 0x70 + 8*i);
++		outw(adrp[1], ioaddr + 0x72 + 8*i);
++		outw(adrp[2], ioaddr + 0x74 + 8*i);
++		mcptr = mcptr->next;
++#if RDC_DEBUG
++	printk("M_ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]);
++#endif
++	}
++	for (i = dev->mc_count; i < 4; i++) {
++		outw(0xffff, ioaddr + 0x68 + 8*i);
++		outw(0xffff, ioaddr + 0x6A + 8*i);
++		outw(0xffff, ioaddr + 0x6C + 8*i);
++	}
++}
++
++static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
++{
++	struct r6040_private *rp = dev->priv;
++
++	strcpy (info->driver, DRV_NAME);
++	strcpy (info->version, DRV_VERSION);
++	strcpy (info->bus_info, pci_name(rp->pdev));
++}
++
++static struct ethtool_ops netdev_ethtool_ops = {
++	.get_drvinfo		= netdev_get_drvinfo,
++};
++
++static int
++r6040_close(struct net_device *dev)
++{
++	struct r6040_private *lp = dev->priv;
++
++	RDC_DBUG("r6040_close()", 0);
++
++ 	/* deleted timer */
++	del_timer_sync(&lp->timer);
++
++	spin_lock_irq(&lp->lock);
++
++	netif_stop_queue(dev);
++
++	r6040_down(dev);
++
++	spin_unlock_irq(&lp->lock);
++
++	return 0;
++}
++
++static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
++{
++	struct r6040_private *lp = dev->priv;
++
++	RDC_DBUG("netdev_ioctl()", 0);
++
++	if (lp->switch_sig == ICPLUS_PHY_ID && cmd == SIOCDEVPRIVATE) {
++		unsigned long *data = (unsigned long *)rq->ifr_data, args[4];
++		int ioaddr = dev->base_addr;
++		unsigned int val;
++
++		data = (unsigned long *)rq->ifr_data;
++		if (copy_from_user(args, data, 4*sizeof(unsigned long)))
++			return -EFAULT;
++
++		/* port priority */
++		if(args[0]&(1<<31))phy_write(ioaddr, 29, 19, (phy_read(ioaddr, 29, 19) | 0x2000));	/* port 0 */
++		if(args[0]&(1<<29))phy_write(ioaddr, 29, 19, (phy_read(ioaddr, 29, 19) | 0x0020));	/* port 1 */
++		if(args[0]&(1<<27))phy_write(ioaddr, 29, 20, (phy_read(ioaddr, 29, 20) | 0x2000));	/* port 2 */
++		if(args[0]&(1<<25))phy_write(ioaddr, 29, 20, (phy_read(ioaddr, 29, 20) | 0x0020));	/* port 3 */
++
++	}
++	return -EOPNOTSUPP;
++}
++
++/**
++	Stop RDC MAC and Free the allocated resource
++ */
++static void r6040_down(struct net_device *dev)
++{
++	struct r6040_private *lp = dev->priv;
++	int i;
++	int ioaddr = dev->base_addr;
++
++	RDC_DBUG("r6040_down()", 0);
++
++	/* Stop MAC */
++	outw(0x0000, ioaddr + 0x40);	/* Mask Off Interrupt */
++	outw(0x0001, ioaddr + 0x04);	/* Reset RDC MAC */
++	i = 0;
++	do{}while((i++ < 2048) && (inw(ioaddr + 0x04) & 0x1));
++	
++	free_irq(dev->irq, dev);
++
++	/* Free RX buffer */
++	for (i = 0; i < RX_DCNT; i++) {
++		if (lp->rx_insert_ptr->skb_ptr) {
++			pci_unmap_single(lp->pdev, lp->rx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
++			dev_kfree_skb(lp->rx_insert_ptr->skb_ptr);
++			lp->rx_insert_ptr->skb_ptr = 0;
++		}
++		lp->rx_insert_ptr = lp->rx_insert_ptr->vndescp;
++	}
++
++	/* Free TX buffer */
++	for (i = 0; i < TX_DCNT; i++) {
++		if (lp->tx_insert_ptr->skb_ptr) {
++			pci_unmap_single(lp->pdev, lp->tx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_TODEVICE);
++			dev_kfree_skb(lp->tx_insert_ptr->skb_ptr);
++			lp->rx_insert_ptr->skb_ptr = 0;
++		}
++		lp->tx_insert_ptr = lp->tx_insert_ptr->vndescp;
++	}
++
++	/* Free Descriptor memory */
++	pci_free_consistent(lp->pdev, ALLOC_DESC_SIZE, lp->desc_pool, lp->desc_dma);
++}
++
++
++
++#ifdef CONFIG_R6040_NAPI
++static int r6040_poll(struct net_device *dev, int *budget)
++{
++	struct r6040_private *lp;
++	struct r6040_descriptor *descptr;
++	struct sk_buff *skb_ptr;
++	int ioaddr, status;
++	unsigned long flags;
++	
++	
++	ioaddr = dev->base_addr;
++	lp = (struct r6040_private *)dev->priv;
++	unsigned long rx_work = dev->quota;
++	unsigned long rx;	
++#if 1
++	/* TX interrupt request */
++	if (NAPI_status & 0x10) {
++		descptr = lp->tx_remove_ptr;
++		while (lp->tx_free_desc < TX_DCNT) {
++			if (descptr->status & 0x8000)
++				break; /* Not complte */
++			
++			skb_ptr = descptr->skb_ptr;
++			pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE);
++			dev_kfree_skb_irq(skb_ptr); /* Free buffer */
++			descptr->skb_ptr = 0;
++			descptr = descptr->vndescp; /* To next descriptor */
++			lp->tx_free_desc++;
++		}
++		lp->tx_remove_ptr = descptr;
++		if (lp->tx_free_desc) netif_wake_queue(dev);
++	}
++#endif	
++#if 1
++	/* RX interrupt request */
++	if (NAPI_status & 0x01) {
++		descptr = lp->rx_remove_ptr;
++		while (lp->rx_free_desc) {
++			if (descptr->status & 0x8000)
++				break; /* No Rx packet */
++			skb_ptr = descptr->skb_ptr;
++			descptr->skb_ptr = 0;
++			skb_ptr->dev = dev;
++			skb_put(skb_ptr, descptr->len - 4);
++			pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
++			skb_ptr->protocol = eth_type_trans(skb_ptr, dev);
++			netif_receive_skb(skb_ptr); /* Send to upper layer */
++			lp->stats.rx_packets++;
++			lp->stats.rx_bytes += descptr->len;
++			descptr = descptr->vndescp; /* To next descriptor */
++			lp->rx_free_desc--;
++		}
++		lp->rx_remove_ptr = descptr;
++	}
++	/* Allocate new RX buffer */
++	if (lp->rx_free_desc < RX_DCNT)
++		rx_buf_alloc(lp, dev);
++	
++	local_irq_disable();
++	netif_rx_complete(dev);
++	outw(R6040_INT_MASK, ioaddr + 0x40);
++	local_irq_enable();
++	return 0;
++#endif		
++}
++#endif
++
++/* Init RDC MAC */
++static void r6040_up(struct net_device *dev)
++{
++	struct r6040_private *lp = dev->priv;
++	struct r6040_descriptor *descptr;
++	int i;
++	int ioaddr = dev->base_addr;
++	u32 tmp_addr;
++	dma_addr_t desc_dma, start_dma;
++	
++	RDC_DBUG("r6040_up()", 0);
++
++	/* Initilize */
++	lp->tx_free_desc = TX_DCNT;
++	lp->rx_free_desc = 0;
++
++	/* Init descriptor */
++	memset(lp->desc_pool, 0, ALLOC_DESC_SIZE); /* Let all descriptor = 0 */
++	lp->tx_insert_ptr = (struct r6040_descriptor *)lp->desc_pool;
++	lp->tx_remove_ptr = lp->tx_insert_ptr;
++	lp->rx_insert_ptr = (struct r6040_descriptor *)lp->tx_insert_ptr+TX_DCNT;
++	lp->rx_remove_ptr = lp->rx_insert_ptr;
++
++	/* Init TX descriptor */
++	descptr = lp->tx_insert_ptr;
++	desc_dma = lp->desc_dma;
++	start_dma = desc_dma;
++	for (i = 0; i < TX_DCNT; i++) {
++		descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor));
++		descptr->vndescp = (descptr + 1);
++		descptr = (descptr + 1);
++		desc_dma += sizeof(struct r6040_descriptor);
++	}
++	(descptr - 1)->ndesc = cpu_to_le32(start_dma);
++	(descptr - 1)->vndescp = lp->tx_insert_ptr;
++
++	/* Init RX descriptor */
++	start_dma = desc_dma;
++	descptr = lp->rx_insert_ptr;
++	for (i = 0; i < RX_DCNT; i++) {
++		descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor));
++		descptr->vndescp = (descptr + 1);
++		descptr = (descptr + 1);
++		desc_dma += sizeof(struct r6040_descriptor);
++	}
++	(descptr - 1)->ndesc = cpu_to_le32(start_dma);
++	(descptr - 1)->vndescp = lp->rx_insert_ptr;
++
++	/* Allocate buffer for RX descriptor */
++	rx_buf_alloc(lp, dev);
++
++#if RDC_DEBUG
++descptr = lp->tx_insert_ptr;
++for (i = 0; i < TX_DCNT; i++) {
++ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
++ descptr = descptr->vndescp;
++}
++descptr = lp->rx_insert_ptr;
++for (i = 0; i < RX_DCNT; i++) {
++ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
++ descptr = descptr->vndescp;
++}
++#endif
++
++	/* MAC operation register */
++	outw(0x01, ioaddr+0x04);	/* Reset MAC */
++        outw(2, ioaddr+0xAC);		/* Reset internal state machine */
++	outw(0, ioaddr+0xAC);
++	udelay(5000);
++
++	/* TX and RX descriptor start Register */
++	tmp_addr = cpu_to_le32(lp->tx_insert_ptr);
++	tmp_addr = virt_to_bus((volatile void *)tmp_addr);
++	outw((u16) tmp_addr, ioaddr+0x2c);
++	outw(tmp_addr >> 16, ioaddr+0x30);
++	tmp_addr = cpu_to_le32(lp->rx_insert_ptr);
++	tmp_addr = virt_to_bus((volatile void *)tmp_addr);
++	outw((u16) tmp_addr, ioaddr+0x34);
++	outw(tmp_addr >> 16, ioaddr+0x38);
++
++	/* Buffer Size Register */
++	outw(MAX_BUF_SIZE, ioaddr+0x18);
++
++	if ((lp->switch_sig = phy_read(ioaddr, 0, 2)) == ICPLUS_PHY_ID) {
++		phy_write(ioaddr, 29,31, 0x175C); /* Enable registers */
++		lp->phy_mode = 0x8000;
++	} else {
++		/* PHY Mode Check */
++		phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
++		phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
++
++		if (PHY_MODE == 0x3100)
++			lp->phy_mode = phy_mode_chk(dev);
++		else
++			lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
++	}
++	/* MAC Bus Control Register */
++	outw(MBCR_DEFAULT, ioaddr+0x8);
++
++	/* MAC TX/RX Enable */
++	lp->mcr0 |= lp->phy_mode;
++	outw(lp->mcr0, ioaddr);
++
++	/* set interrupt waiting time and packet numbers */
++	outw(0x0802, ioaddr + 0x0C);
++	outw(0x0802, ioaddr + 0x10);
++
++	/* upgrade performance (by RDC guys) */
++	phy_write(ioaddr, 30, 17, (phy_read(ioaddr, 30, 17) | 0x4000));        //bit 14=1
++	phy_write(ioaddr, 30, 17, ~((~phy_read(ioaddr, 30, 17)) | 0x2000));    //bit 13=0
++	phy_write(ioaddr, 0, 19, 0x0000);
++	phy_write(ioaddr, 0, 30, 0x01F0);
++
++	/* Interrupt Mask Register */
++	outw(R6040_INT_MASK, ioaddr + 0x40);
++}
++
++/*
++  A periodic timer routine
++	Polling PHY Chip Link Status
++*/
++static void r6040_timer(unsigned long data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	struct r6040_private *lp = dev->priv;
++	u16 ioaddr = dev->base_addr, phy_mode;
++
++ 	RDC_DBUG("r6040_timer()", 0);
++
++	/* Polling PHY Chip Status */
++	if (PHY_MODE == 0x3100) 
++		phy_mode = phy_mode_chk(dev);
++	else
++		phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
++
++	if (phy_mode != lp->phy_mode) {
++		lp->phy_mode = phy_mode;
++		lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode;
++		outw(lp->mcr0, ioaddr);
++		printk(KERN_INFO "Link Change %x \n", inw(ioaddr));
++	}
++
++	/* Debug */
++//	printk("<RDC> Timer: CR0 %x CR40 %x CR3C %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c));
++
++	/* Timer active again */
++	lp->timer.expires = TIMER_WUT;
++	add_timer(&lp->timer);
++}
++
++/* Allocate skb buffer for rx descriptor */
++static void rx_buf_alloc(struct r6040_private *lp, struct net_device *dev)
++{
++	struct r6040_descriptor *descptr;
++	int ioaddr = dev->base_addr ;
++
++	RDC_DBUG("rx_buf_alloc()", 0);
++
++	descptr = lp->rx_insert_ptr;
++	while (lp->rx_free_desc < RX_DCNT) {
++		descptr->skb_ptr = dev_alloc_skb(MAX_BUF_SIZE);
++
++		if (!descptr->skb_ptr)
++			break;
++		descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, descptr->skb_ptr->tail, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE));
++		descptr->status = 0x8000;
++		descptr = descptr->vndescp;
++		lp->rx_free_desc++;
++		outw(lp->mcr0 | 0x0002, ioaddr); /* Trigger Rx DMA */
++	}
++	lp->rx_insert_ptr = descptr;
++}
++
++/* Status of PHY CHIP */
++static int phy_mode_chk(struct net_device *dev)
++{
++	struct r6040_private *lp = dev->priv;
++	int ioaddr = dev->base_addr, phy_dat;
++
++	RDC_DBUG("phy_mode_chk()", 0);
++
++	/* PHY Link Status Check */
++	phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
++	if (!(phy_dat & 0x4))
++		return 0x8000;	/* Link Failed, full duplex */
++
++	/* PHY Chip Auto-Negotiation Status */
++	phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
++	if (phy_dat & 0x0020) {
++		/* Auto Negotiation Mode */
++		phy_dat = phy_read(ioaddr, lp->phy_addr, 5);
++		phy_dat &= phy_read(ioaddr, lp->phy_addr, 4);
++		if (phy_dat & 0x140)
++			phy_dat = 0x8000;
++		else
++			phy_dat = 0;
++	} else {
++		/* Force Mode */
++		phy_dat = phy_read(ioaddr, lp->phy_addr, 0);
++		if (phy_dat & 0x100) phy_dat = 0x8000;
++		else phy_dat = 0x0000;
++	}
++
++	return phy_dat;
++};
++
++/* Read a word data from PHY Chip */
++static int phy_read(int ioaddr, int phy_addr, int reg_idx)
++{
++	int i = 0;
++
++	RDC_DBUG("phy_read()", 0);
++	outw(0x2000 + reg_idx + (phy_addr << 8), ioaddr + 0x20);
++	do {} while ((i++ < 2048) && (inw(ioaddr + 0x20) & 0x2000));
++
++	return inw(ioaddr + 0x24);
++}
++
++/* Write a word data from PHY Chip */
++static void phy_write(int ioaddr, int phy_addr, int reg_idx, int dat)
++{
++	int i = 0;
++
++	RDC_DBUG("phy_write()", 0);
++	outw(dat, ioaddr + 0x28);
++	outw(0x4000 + reg_idx + (phy_addr << 8), ioaddr + 0x20);
++	do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x4000) );
++}
++
++enum {
++	RDC_6040 = 0
++};
++
++static struct pci_device_id r6040_pci_tbl[] = {
++	{PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6040, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040},
++	/*{0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040},*/
++	{0,}
++};
++MODULE_DEVICE_TABLE(pci, r6040_pci_tbl);
++
++static struct pci_driver r6040_driver = {
++	.name		= "r6040",
++	.id_table	= r6040_pci_tbl,
++	.probe		= r6040_init_one,
++	.remove		= __devexit_p(r6040_remove_one),
++};
++
++
++static int __init r6040_init (void)
++{
++	RDC_DBUG("r6040_init()", 0);
++
++	printk(KERN_INFO "%s\n", version);
++	printed_version = 1;
++
++	if (parent != NULL) {
++		struct net_device *the_parent = dev_get_by_name(parent);
++
++		if (the_parent == NULL) {
++			printk (KERN_ERR DRV_NAME ": Unknown device \"%s\" specified.\n", parent);
++			return -EINVAL;
++		}
++		memcpy((u8 *)&adr_table[0][0], the_parent->dev_addr, 6);
++		memcpy((u8 *)&adr_table[1][0], the_parent->dev_addr, 6);
++		++*(u8 *)&adr_table[0][5];
++	}
++	return pci_register_driver (&r6040_driver);
++}
++
++
++static void __exit r6040_cleanup (void)
++{
++	RDC_DBUG("r6040_cleanup()", 0);
++	pci_unregister_driver (&r6040_driver);
++}
++
++module_init(r6040_init);
++module_exit(r6040_cleanup);
diff --git a/target/linux/rdc/patches-2.6.23/003-rootfstype.patch b/target/linux/rdc/patches-2.6.23/003-rootfstype.patch
new file mode 100644
index 0000000000..34ac3d0a71
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.23/003-rootfstype.patch
@@ -0,0 +1,11 @@
+--- linux-2.6.19.2/init/do_mounts.c	2007-01-10 11:10:37.000000000 -0800
++++ foo/init/do_mounts.c	2007-04-05 13:15:37.000000000 -0700
+@@ -243,6 +243,8 @@
+ {
+ 	char *s = page;
+ 
++	if (!root_fs_names)
++		root_fs_names = "squashfs,jffs2";
+ 	if (root_fs_names) {
+ 		strcpy(page, root_fs_names);
+ 		while (*s++) {
diff --git a/target/linux/rdc/patches-2.6.23/004-rdc_fixes.patch b/target/linux/rdc/patches-2.6.23/004-rdc_fixes.patch
new file mode 100644
index 0000000000..7b87773cf1
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.23/004-rdc_fixes.patch
@@ -0,0 +1,73 @@
+diff -urN linux-2.6.19/arch/i386/Kconfig linux-2.6.19.new/arch/i386/Kconfig
+--- linux-2.6.19/arch/i386/Kconfig	2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/i386/Kconfig	2006-12-17 17:13:33.000000000 +0100
+@@ -180,6 +180,16 @@
+ 	  Only choose this option if you have such a system, otherwise you
+ 	  should say N here.
+ 
++config X86_RDC
++	bool "Support for RDC 3211 boards"
++	select GENERIC_GPIO
++	select LEDS_GPIO
++	help
++	  Support for RDC 3211 systems. Say 'Y' here if the kernel is 
++	  supposed to run on an IA-32 RDC R3211 system.
++	  Only choose this option if you have such as system, otherwise you
++	  should say N here.
++
+ endchoice
+ 
+ config ACPI_SRAT
+diff -urN linux-2.6.19/arch/i386/Makefile linux-2.6.19.new/arch/i386/Makefile
+--- linux-2.6.19/arch/i386/Makefile	2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/i386/Makefile	2006-12-17 17:13:33.000000000 +0100
+@@ -92,6 +92,10 @@
+ mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-i386/mach-es7000
+ mcore-$(CONFIG_X86_ES7000)	:= mach-default
+ core-$(CONFIG_X86_ES7000)	:= arch/i386/mach-es7000/
++# RDC subarch support
++mflags-$(CONFIG_X86_RDC)	:= -Iinclude/asm-i386/mach-rdc
++mcore-$(CONFIG_X86_RDC)		:= mach-default
++core-$(CONFIG_X86_RDC)		+= arch/i386/mach-rdc/
+ 
+ # default subarch .h files
+ mflags-y += -Iinclude/asm-i386/mach-default
+--- timex.h	2007-08-07 10:44:03.816112250 -0700
++++ linux/include/asm-i386/timex.h	2007-08-07 10:48:47.905866750 -0700
+@@ -11,6 +11,8 @@
+ 
+ #ifdef CONFIG_X86_ELAN
+ #  define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */
++#elif defined(CONFIG_X86_RDC)
++#  define CLOCK_TICK_RATE 1041667 /* Underlying HZ for R8610 */
+ #else
+ #  define CLOCK_TICK_RATE 1193182 /* Underlying HZ */
+ #endif
+--- reboot_fixups.c	2007-08-07 12:02:00.908412250 -0700
++++ linux/arch/i386/kernel/reboot_fixups.c	2007-08-07 12:18:49.391438500 -0700
+@@ -13,6 +13,17 @@
+ #include <linux/pci.h>
+ #include <asm/reboot_fixups.h>
+ #include <asm/msr.h>
++
++static void r8610_reset(struct pci_dev *dev)
++{
++	int i;
++
++	outl(0x80003840,0xCF8);
++	i=inl(0xCFC);
++	i |= 0x1600;
++	outl(i,0xCFC);
++	outb(1,0x92);
++}
+ 
+ static void cs5530a_warm_reset(struct pci_dev *dev)
+ {
+@@ -40,6 +53,7 @@
+ };
+ 
+ static struct device_fixup fixups_table[] = {
++{ PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, r8610_reset },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
+ };
diff --git a/target/linux/rdc/patches-2.6.23/005-rdc_x86_cpu_type.patch b/target/linux/rdc/patches-2.6.23/005-rdc_x86_cpu_type.patch
new file mode 100644
index 0000000000..9e0eefb09e
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.23/005-rdc_x86_cpu_type.patch
@@ -0,0 +1,22 @@
+diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile
+--- linux-2.6.22.1/arch/i386/kernel/cpu/Makefile	2007-08-11 22:16:24.000000000 +0200
++++ linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile	2007-08-13 16:37:32.000000000 +0200
+@@ -12,6 +12,7 @@
+ obj-y	+=	rise.o
+ obj-y	+=	nexgen.o
+ obj-y	+=	umc.o
++obj-$(CONFIG_X86_RDC)	+=	rdc.o
+ 
+ obj-$(CONFIG_X86_MCE)	+=	mcheck/
+ 
+diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile
+--- linux-2.6.22.1/include/asm-i386/processor.h	2007-08-13 16:42:25.000000000 +0200
++++ linux-2.6.22.1.new/include/asm-i386/processor.h	2007-08-13 16:51:19.000000000 +0200
+@@ -92,6 +92,7 @@
+ #define X86_VENDOR_TRANSMETA 7
+ #define X86_VENDOR_NSC 8
+ #define X86_VENDOR_NUM 9
++#define X86_VENDOR_RDC 0xff
+ #define X86_VENDOR_UNKNOWN 0xff
+ 
+ /*
diff --git a/target/linux/rdc/patches-2.6.23/006-pci_ids.patch b/target/linux/rdc/patches-2.6.23/006-pci_ids.patch
new file mode 100644
index 0000000000..cd4c01d920
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.23/006-pci_ids.patch
@@ -0,0 +1,18 @@
+diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
+index 55f307f..4a1aa34 100644
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -2076,6 +2076,13 @@
+ #define PCI_DEVICE_ID_HERC_WIN		0x5732
+ #define PCI_DEVICE_ID_HERC_UNI		0x5832
+ 
++#define PCI_VENDOR_ID_RDC		0x17f3
++#define PCI_DEVICE_ID_RDC_R6020		0x6020
++#define PCI_DEVICE_ID_RDC_R6030		0x6030
++#define PCI_DEVICE_ID_RDC_R6040		0x6040
++#define PCI_DEVICE_ID_RDC_R6060		0x6060
++#define PCI_DEVICE_ID_RDC_R6061		0x6061
++
+ #define PCI_VENDOR_ID_SITECOM		0x182d
+ #define PCI_DEVICE_ID_SITECOM_DC105V2	0x3069
+ 
diff --git a/target/linux/rdc/patches-2.6.23/600-x86_lzma.patch b/target/linux/rdc/patches-2.6.23/600-x86_lzma.patch
new file mode 100644
index 0000000000..bb10f1fdcc
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.23/600-x86_lzma.patch
@@ -0,0 +1,1042 @@
+diff -Naur linux-old/arch/i386/boot/compressed/LzmaDecode.c linux-lzma/arch/i386/boot/compressed/LzmaDecode.c
+--- linux-old/arch/i386/boot/compressed/LzmaDecode.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-lzma/arch/i386/boot/compressed/LzmaDecode.c	2005-06-05 00:07:38.000000000 -0400
+@@ -0,0 +1,586 @@
++/*
++  LzmaDecode.c
++  LZMA Decoder (optimized for Speed version)
++  
++  LZMA SDK 4.17 Copyright (c) 1999-2005 Igor Pavlov (2005-04-05)
++  http://www.7-zip.org/
++
++  LZMA SDK is licensed under two licenses:
++  1) GNU Lesser General Public License (GNU LGPL)
++  2) Common Public License (CPL)
++  It means that you can select one of these two licenses and 
++  follow rules of that license.
++
++  SPECIAL EXCEPTION:
++  Igor Pavlov, as the author of this Code, expressly permits you to 
++  statically or dynamically link your Code (or bind by name) to the 
++  interfaces of this file without subjecting your linked Code to the 
++  terms of the CPL or GNU LGPL. Any modifications or additions 
++  to this file, however, are subject to the LGPL or CPL terms.
++*/
++
++#include "LzmaDecode.h"
++
++#ifndef Byte
++#define Byte unsigned char
++#endif
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++
++#define RC_READ_BYTE (*Buffer++)
++
++#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
++  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
++
++#ifdef _LZMA_IN_CB
++
++#define RC_TEST { if (Buffer == BufferLim) \
++  { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
++  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
++
++#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
++
++#else
++
++#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
++
++#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
++ 
++#endif
++
++#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
++
++#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
++#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
++#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
++
++#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
++  { UpdateBit0(p); mi <<= 1; A0; } else \
++  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
++  
++#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
++
++#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
++  { int i = numLevels; res = 1; \
++  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
++  res -= (1 << numLevels); }
++
++
++#define kNumPosBitsMax 4
++#define kNumPosStatesMax (1 << kNumPosBitsMax)
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define LenChoice 0
++#define LenChoice2 (LenChoice + 1)
++#define LenLow (LenChoice2 + 1)
++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
++#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
++
++
++#define kNumStates 12
++#define kNumLitStates 7
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#define kNumPosSlotBits 6
++#define kNumLenToPosStates 4
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++
++#define kMatchMinLen 2
++
++#define IsMatch 0
++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
++#define IsRepG0 (IsRep + kNumStates)
++#define IsRepG1 (IsRepG0 + kNumStates)
++#define IsRepG2 (IsRepG1 + kNumStates)
++#define IsRep0Long (IsRepG2 + kNumStates)
++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
++#define LenCoder (Align + kAlignTableSize)
++#define RepLenCoder (LenCoder + kNumLenProbs)
++#define Literal (RepLenCoder + kNumLenProbs)
++
++#if Literal != LZMA_BASE_SIZE
++StopCompilingDueBUG
++#endif
++
++#ifdef _LZMA_OUT_READ
++
++typedef struct _LzmaVarState
++{
++  Byte *Buffer;
++  Byte *BufferLim;
++  UInt32 Range;
++  UInt32 Code;
++  #ifdef _LZMA_IN_CB
++  ILzmaInCallback *InCallback;
++  #endif
++  Byte *Dictionary;
++  UInt32 DictionarySize;
++  UInt32 DictionaryPos;
++  UInt32 GlobalPos;
++  UInt32 Reps[4];
++  int lc;
++  int lp;
++  int pb;
++  int State;
++  int RemainLen;
++  Byte TempDictionary[4];
++} LzmaVarState;
++
++int LzmaDecoderInit(
++    unsigned char *buffer, UInt32 bufferSize,
++    int lc, int lp, int pb,
++    unsigned char *dictionary, UInt32 dictionarySize,
++    #ifdef _LZMA_IN_CB
++    ILzmaInCallback *InCallback
++    #else
++    unsigned char *inStream, UInt32 inSize
++    #endif
++    )
++{
++  Byte *Buffer;
++  Byte *BufferLim;
++  UInt32 Range;
++  UInt32 Code;
++  LzmaVarState *vs = (LzmaVarState *)buffer;
++  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
++  UInt32 i;
++  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
++    return LZMA_RESULT_NOT_ENOUGH_MEM;
++  vs->Dictionary = dictionary;
++  vs->DictionarySize = dictionarySize;
++  vs->DictionaryPos = 0;
++  vs->GlobalPos = 0;
++  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
++  vs->lc = lc;
++  vs->lp = lp;
++  vs->pb = pb;
++  vs->State = 0;
++  vs->RemainLen = 0;
++  dictionary[dictionarySize - 1] = 0;
++  for (i = 0; i < numProbs; i++)
++    p[i] = kBitModelTotal >> 1; 
++
++  #ifdef _LZMA_IN_CB
++  RC_INIT;
++  #else
++  RC_INIT(inStream, inSize);
++  #endif
++  vs->Buffer = Buffer;
++  vs->BufferLim = BufferLim;
++  vs->Range = Range;
++  vs->Code = Code;
++  #ifdef _LZMA_IN_CB
++  vs->InCallback = InCallback;
++  #endif
++
++  return LZMA_RESULT_OK;
++}
++
++int LzmaDecode(unsigned char *buffer, 
++    unsigned char *outStream, UInt32 outSize,
++    UInt32 *outSizeProcessed)
++{
++  LzmaVarState *vs = (LzmaVarState *)buffer;
++  Byte *Buffer = vs->Buffer;
++  Byte *BufferLim = vs->BufferLim;
++  UInt32 Range = vs->Range;
++  UInt32 Code = vs->Code;
++  #ifdef _LZMA_IN_CB
++  ILzmaInCallback *InCallback = vs->InCallback;
++  #endif
++  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
++  int state = vs->State;
++  Byte previousByte;
++  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
++  UInt32 nowPos = 0;
++  UInt32 posStateMask = (1 << (vs->pb)) - 1;
++  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
++  int lc = vs->lc;
++  int len = vs->RemainLen;
++  UInt32 globalPos = vs->GlobalPos;
++
++  Byte *dictionary = vs->Dictionary;
++  UInt32 dictionarySize = vs->DictionarySize;
++  UInt32 dictionaryPos = vs->DictionaryPos;
++
++  Byte tempDictionary[4];
++  if (dictionarySize == 0)
++  {
++    dictionary = tempDictionary;
++    dictionarySize = 1;
++    tempDictionary[0] = vs->TempDictionary[0];
++  }
++
++  if (len == -1)
++  {
++    *outSizeProcessed = 0;
++    return LZMA_RESULT_OK;
++  }
++
++  while(len != 0 && nowPos < outSize)
++  {
++    UInt32 pos = dictionaryPos - rep0;
++    if (pos >= dictionarySize)
++      pos += dictionarySize;
++    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
++    if (++dictionaryPos == dictionarySize)
++      dictionaryPos = 0;
++    len--;
++  }
++  if (dictionaryPos == 0)
++    previousByte = dictionary[dictionarySize - 1];
++  else
++    previousByte = dictionary[dictionaryPos - 1];
++#else
++
++int LzmaDecode(
++    Byte *buffer, UInt32 bufferSize,
++    int lc, int lp, int pb,
++    #ifdef _LZMA_IN_CB
++    ILzmaInCallback *InCallback,
++    #else
++    unsigned char *inStream, UInt32 inSize,
++    #endif
++    unsigned char *outStream, UInt32 outSize,
++    UInt32 *outSizeProcessed)
++{
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
++  CProb *p = (CProb *)buffer;
++
++  UInt32 i;
++  int state = 0;
++  Byte previousByte = 0;
++  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
++  UInt32 nowPos = 0;
++  UInt32 posStateMask = (1 << pb) - 1;
++  UInt32 literalPosMask = (1 << lp) - 1;
++  int len = 0;
++  
++  Byte *Buffer;
++  Byte *BufferLim;
++  UInt32 Range;
++  UInt32 Code;
++  
++  if (bufferSize < numProbs * sizeof(CProb))
++    return LZMA_RESULT_NOT_ENOUGH_MEM;
++  for (i = 0; i < numProbs; i++)
++    p[i] = kBitModelTotal >> 1;
++  
++
++  #ifdef _LZMA_IN_CB
++  RC_INIT;
++  #else
++  RC_INIT(inStream, inSize);
++  #endif
++#endif
++
++  *outSizeProcessed = 0;
++  while(nowPos < outSize)
++  {
++    CProb *prob;
++    UInt32 bound;
++    int posState = (int)(
++        (nowPos 
++        #ifdef _LZMA_OUT_READ
++        + globalPos
++        #endif
++        )
++        & posStateMask);
++
++    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
++    IfBit0(prob)
++    {
++      int symbol = 1;
++      UpdateBit0(prob)
++      prob = p + Literal + (LZMA_LIT_SIZE * 
++        (((
++        (nowPos 
++        #ifdef _LZMA_OUT_READ
++        + globalPos
++        #endif
++        )
++        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
++
++      if (state >= kNumLitStates)
++      {
++        int matchByte;
++        #ifdef _LZMA_OUT_READ
++        UInt32 pos = dictionaryPos - rep0;
++        if (pos >= dictionarySize)
++          pos += dictionarySize;
++        matchByte = dictionary[pos];
++        #else
++        matchByte = outStream[nowPos - rep0];
++        #endif
++        do
++        {
++          int bit;
++          CProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & 0x100);
++          probLit = prob + 0x100 + bit + symbol;
++          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
++        }
++        while (symbol < 0x100);
++      }
++      while (symbol < 0x100)
++      {
++        CProb *probLit = prob + symbol;
++        RC_GET_BIT(probLit, symbol)
++      }
++      previousByte = (Byte)symbol;
++
++      outStream[nowPos++] = previousByte;
++      #ifdef _LZMA_OUT_READ
++      dictionary[dictionaryPos] = previousByte;
++      if (++dictionaryPos == dictionarySize)
++        dictionaryPos = 0;
++      #endif
++      if (state < 4) state = 0;
++      else if (state < 10) state -= 3;
++      else state -= 6;
++    }
++    else             
++    {
++      UpdateBit1(prob);
++      prob = p + IsRep + state;
++      IfBit0(prob)
++      {
++        UpdateBit0(prob);
++        rep3 = rep2;
++        rep2 = rep1;
++        rep1 = rep0;
++        state = state < kNumLitStates ? 0 : 3;
++        prob = p + LenCoder;
++      }
++      else
++      {
++        UpdateBit1(prob);
++        prob = p + IsRepG0 + state;
++        IfBit0(prob)
++        {
++          UpdateBit0(prob);
++          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IfBit0(prob)
++          {
++            #ifdef _LZMA_OUT_READ
++            UInt32 pos;
++            #endif
++            UpdateBit0(prob);
++            if (nowPos 
++                #ifdef _LZMA_OUT_READ
++                + globalPos
++                #endif
++                == 0)
++              return LZMA_RESULT_DATA_ERROR;
++            state = state < kNumLitStates ? 9 : 11;
++            #ifdef _LZMA_OUT_READ
++            pos = dictionaryPos - rep0;
++            if (pos >= dictionarySize)
++              pos += dictionarySize;
++            previousByte = dictionary[pos];
++            dictionary[dictionaryPos] = previousByte;
++            if (++dictionaryPos == dictionarySize)
++              dictionaryPos = 0;
++            #else
++            previousByte = outStream[nowPos - rep0];
++            #endif
++            outStream[nowPos++] = previousByte;
++            continue;
++          }
++          else
++          {
++            UpdateBit1(prob);
++          }
++        }
++        else
++        {
++          UInt32 distance;
++          UpdateBit1(prob);
++          prob = p + IsRepG1 + state;
++          IfBit0(prob)
++          {
++            UpdateBit0(prob);
++            distance = rep1;
++          }
++          else 
++          {
++            UpdateBit1(prob);
++            prob = p + IsRepG2 + state;
++            IfBit0(prob)
++            {
++              UpdateBit0(prob);
++              distance = rep2;
++            }
++            else
++            {
++              UpdateBit1(prob);
++              distance = rep3;
++              rep3 = rep2;
++            }
++            rep2 = rep1;
++          }
++          rep1 = rep0;
++          rep0 = distance;
++        }
++        state = state < kNumLitStates ? 8 : 11;
++        prob = p + RepLenCoder;
++      }
++      {
++        int numBits, offset;
++        CProb *probLen = prob + LenChoice;
++        IfBit0(probLen)
++        {
++          UpdateBit0(probLen);
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          numBits = kLenNumLowBits;
++        }
++        else
++        {
++          UpdateBit1(probLen);
++          probLen = prob + LenChoice2;
++          IfBit0(probLen)
++          {
++            UpdateBit0(probLen);
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            numBits = kLenNumMidBits;
++          }
++          else
++          {
++            UpdateBit1(probLen);
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            numBits = kLenNumHighBits;
++          }
++        }
++        RangeDecoderBitTreeDecode(probLen, numBits, len);
++        len += offset;
++      }
++
++      if (state < 4)
++      {
++        int posSlot;
++        state += kNumLitStates;
++        prob = p + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
++            kNumPosSlotBits);
++        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
++        if (posSlot >= kStartPosModelIndex)
++        {
++          int numDirectBits = ((posSlot >> 1) - 1);
++          rep0 = (2 | ((UInt32)posSlot & 1));
++          if (posSlot < kEndPosModelIndex)
++          {
++            rep0 <<= numDirectBits;
++            prob = p + SpecPos + rep0 - posSlot - 1;
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              RC_NORMALIZE
++              Range >>= 1;
++              rep0 <<= 1;
++              if (Code >= Range)
++              {
++                Code -= Range;
++                rep0 |= 1;
++              }
++            }
++            while (--numDirectBits != 0);
++            prob = p + Align;
++            rep0 <<= kNumAlignBits;
++            numDirectBits = kNumAlignBits;
++          }
++          {
++            int i = 1;
++            int mi = 1;
++            do
++            {
++              CProb *prob3 = prob + mi;
++              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
++              i <<= 1;
++            }
++            while(--numDirectBits != 0);
++          }
++        }
++        else
++          rep0 = posSlot;
++        if (++rep0 == (UInt32)(0))
++        {
++          /* it's for stream version */
++          len = -1;
++          break;
++        }
++      }
++
++      len += kMatchMinLen;
++      if (rep0 > nowPos 
++        #ifdef _LZMA_OUT_READ
++        + globalPos || rep0 > dictionarySize
++        #endif
++        ) 
++        return LZMA_RESULT_DATA_ERROR;
++      do
++      {
++        #ifdef _LZMA_OUT_READ
++        UInt32 pos = dictionaryPos - rep0;
++        if (pos >= dictionarySize)
++          pos += dictionarySize;
++        previousByte = dictionary[pos];
++        dictionary[dictionaryPos] = previousByte;
++        if (++dictionaryPos == dictionarySize)
++          dictionaryPos = 0;
++        #else
++        previousByte = outStream[nowPos - rep0];
++        #endif
++        len--;
++        outStream[nowPos++] = previousByte;
++      }
++      while(len != 0 && nowPos < outSize);
++    }
++  }
++  RC_NORMALIZE;
++
++  #ifdef _LZMA_OUT_READ
++  vs->Buffer = Buffer;
++  vs->BufferLim = BufferLim;
++  vs->Range = Range;
++  vs->Code = Code;
++  vs->DictionaryPos = dictionaryPos;
++  vs->GlobalPos = globalPos + nowPos;
++  vs->Reps[0] = rep0;
++  vs->Reps[1] = rep1;
++  vs->Reps[2] = rep2;
++  vs->Reps[3] = rep3;
++  vs->State = state;
++  vs->RemainLen = len;
++  vs->TempDictionary[0] = tempDictionary[0];
++  #endif
++
++  *outSizeProcessed = nowPos;
++  return LZMA_RESULT_OK;
++}
+diff -Naur linux-old/arch/i386/boot/compressed/LzmaDecode.h linux-lzma/arch/i386/boot/compressed/LzmaDecode.h
+--- linux-old/arch/i386/boot/compressed/LzmaDecode.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-lzma/arch/i386/boot/compressed/LzmaDecode.h	2005-06-05 00:07:39.000000000 -0400
+@@ -0,0 +1,100 @@
++/* 
++  LzmaDecode.h
++  LZMA Decoder interface
++
++  LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
++  http://www.7-zip.org/
++
++  LZMA SDK is licensed under two licenses:
++  1) GNU Lesser General Public License (GNU LGPL)
++  2) Common Public License (CPL)
++  It means that you can select one of these two licenses and 
++  follow rules of that license.
++
++  SPECIAL EXCEPTION:
++  Igor Pavlov, as the author of this code, expressly permits you to 
++  statically or dynamically link your code (or bind by name) to the 
++  interfaces of this file without subjecting your linked code to the 
++  terms of the CPL or GNU LGPL. Any modifications or additions 
++  to this file, however, are subject to the LGPL or CPL terms.
++*/
++
++#ifndef __LZMADECODE_H
++#define __LZMADECODE_H
++
++/* #define _LZMA_IN_CB */
++/* Use callback for input data */
++
++/* #define _LZMA_OUT_READ */
++/* Use read function for output data */
++
++/* #define _LZMA_PROB32 */
++/* It can increase speed on some 32-bit CPUs, 
++   but memory usage will be doubled in that case */
++
++/* #define _LZMA_LOC_OPT */
++/* Enable local speed optimizations inside code */
++
++#ifndef UInt32
++#ifdef _LZMA_UINT32_IS_ULONG
++#define UInt32 unsigned long
++#else
++#define UInt32 unsigned int
++#endif
++#endif
++
++#ifdef _LZMA_PROB32
++#define CProb UInt32
++#else
++#define CProb unsigned short
++#endif
++
++#define LZMA_RESULT_OK 0
++#define LZMA_RESULT_DATA_ERROR 1
++#define LZMA_RESULT_NOT_ENOUGH_MEM 2
++
++#ifdef _LZMA_IN_CB
++typedef struct _ILzmaInCallback
++{
++  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
++} ILzmaInCallback;
++#endif
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++/* 
++bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
++bufferSize += 100 in case of _LZMA_OUT_READ
++by default CProb is unsigned short, 
++but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
++*/
++
++#ifdef _LZMA_OUT_READ
++int LzmaDecoderInit(
++    unsigned char *buffer, UInt32 bufferSize,
++    int lc, int lp, int pb,
++    unsigned char *dictionary, UInt32 dictionarySize,
++  #ifdef _LZMA_IN_CB
++    ILzmaInCallback *inCallback
++  #else
++    unsigned char *inStream, UInt32 inSize
++  #endif
++);
++#endif
++
++int LzmaDecode(
++    unsigned char *buffer, 
++  #ifndef _LZMA_OUT_READ
++    UInt32 bufferSize,
++    int lc, int lp, int pb,
++  #ifdef _LZMA_IN_CB
++    ILzmaInCallback *inCallback,
++  #else
++    unsigned char *inStream, UInt32 inSize,
++  #endif
++  #endif
++    unsigned char *outStream, UInt32 outSize,
++    UInt32 *outSizeProcessed);
++
++#endif
+diff -Naur linux-old/arch/i386/boot/compressed/lzma_misc.c linux-lzma/arch/i386/boot/compressed/lzma_misc.c
+--- linux-old/arch/i386/boot/compressed/lzma_misc.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-lzma/arch/i386/boot/compressed/lzma_misc.c	2005-06-04 21:33:48.000000000 -0400
+@@ -0,0 +1,281 @@
++/*
++ * lzma_misc.c
++ * 
++ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
++ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
++ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
++ * 
++ * Decompress LZMA compressed vmlinuz 
++ * Version 0.9 Copyright (c) Ming-Ching Tiew mctiew@yahoo.com
++ * Program adapted from misc.c for 2.6 kernel
++ * Forward ported to latest 2.6 version of misc.c by
++ * Felix Fietkau <nbd@openwrt.org>
++ */
++
++#undef CONFIG_PARAVIRT
++#include <linux/linkage.h>
++#include <linux/vmalloc.h>
++#include <linux/screen_info.h>
++#include <asm/io.h>
++#include <asm/page.h>
++#include <asm/boot.h>
++
++/* WARNING!!
++ * This code is compiled with -fPIC and it is relocated dynamically
++ * at run time, but no relocation processing is performed.
++ * This means that it is not safe to place pointers in static structures.
++ */
++
++/*
++ * Getting to provable safe in place decompression is hard.
++ * Worst case behaviours need to be analized.
++ * Background information:
++ *
++ * The file layout is:
++ *    magic[2]
++ *    method[1]
++ *    flags[1]
++ *    timestamp[4]
++ *    extraflags[1]
++ *    os[1]
++ *    compressed data blocks[N]
++ *    crc[4] orig_len[4]
++ *
++ * resulting in 18 bytes of non compressed data overhead.
++ *
++ * Files divided into blocks
++ * 1 bit (last block flag)
++ * 2 bits (block type)
++ *
++ * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
++ * The smallest block type encoding is always used.
++ *
++ * stored:
++ *    32 bits length in bytes.
++ *
++ * fixed:
++ *    magic fixed tree.
++ *    symbols.
++ *
++ * dynamic:
++ *    dynamic tree encoding.
++ *    symbols.
++ *
++ *
++ * The buffer for decompression in place is the length of the
++ * uncompressed data, plus a small amount extra to keep the algorithm safe.
++ * The compressed data is placed at the end of the buffer.  The output
++ * pointer is placed at the start of the buffer and the input pointer
++ * is placed where the compressed data starts.  Problems will occur
++ * when the output pointer overruns the input pointer.
++ *
++ * The output pointer can only overrun the input pointer if the input
++ * pointer is moving faster than the output pointer.  A condition only
++ * triggered by data whose compressed form is larger than the uncompressed
++ * form.
++ *
++ * The worst case at the block level is a growth of the compressed data
++ * of 5 bytes per 32767 bytes.
++ *
++ * The worst case internal to a compressed block is very hard to figure.
++ * The worst case can at least be boundined by having one bit that represents
++ * 32764 bytes and then all of the rest of the bytes representing the very
++ * very last byte.
++ *
++ * All of which is enough to compute an amount of extra data that is required
++ * to be safe.  To avoid problems at the block level allocating 5 extra bytes
++ * per 32767 bytes of data is sufficient.  To avoind problems internal to a block
++ * adding an extra 32767 bytes (the worst case uncompressed block size) is
++ * sufficient, to ensure that in the worst case the decompressed data for
++ * block will stop the byte before the compressed data for a block begins.
++ * To avoid problems with the compressed data's meta information an extra 18
++ * bytes are needed.  Leading to the formula:
++ *
++ * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
++ *
++ * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
++ * Adding 32768 instead of 32767 just makes for round numbers.
++ * Adding the decompressor_size is necessary as it musht live after all
++ * of the data as well.  Last I measured the decompressor is about 14K.
++ * 10K of actuall data and 4K of bss.
++ *
++ */
++
++/*
++ * gzip declarations
++ */
++
++#define OF(args)  args
++#define STATIC static
++
++#undef memcpy
++
++typedef unsigned char  uch;
++typedef unsigned short ush;
++typedef unsigned long  ulg;
++
++#define WSIZE 0x80000000	/* Window size must be at least 32k,
++				 * and a power of two
++				 * We don't actually have a window just
++				 * a huge output buffer so I report
++				 * a 2G windows size, as that should
++				 * always be larger than our output buffer.
++				 */
++
++static uch *inbuf;	/* input buffer */
++static uch *window;	/* Sliding window buffer, (and final output buffer) */
++
++static unsigned insize;  /* valid bytes in inbuf */
++static unsigned inptr;   /* index of next byte to be processed in inbuf */
++static unsigned long workspace;
++
++#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
++		
++/* Diagnostic functions */
++#ifdef DEBUG
++#  define Assert(cond,msg) {if(!(cond)) error(msg);}
++#  define Trace(x) fprintf x
++#  define Tracev(x) {if (verbose) fprintf x ;}
++#  define Tracevv(x) {if (verbose>1) fprintf x ;}
++#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
++#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
++#else
++#  define Assert(cond,msg)
++#  define Trace(x)
++#  define Tracev(x)
++#  define Tracevv(x)
++#  define Tracec(c,x)
++#  define Tracecv(c,x)
++#endif
++
++static int  fill_inbuf(void);
++  
++/*
++ * This is set up by the setup-routine at boot-time
++ */
++static unsigned char *real_mode; /* Pointer to real-mode data */
++extern unsigned char input_data[];
++extern int input_len;
++
++static void error(char *x);
++static void *memcpy(void *dest, const void *src, unsigned n);
++
++#ifdef CONFIG_X86_NUMAQ
++void *xquad_portio;
++#endif
++
++static void* memcpy(void* dest, const void* src, unsigned n)
++{
++	int i;
++	char *d = (char *)dest, *s = (char *)src;
++
++	for (i=0;i<n;i++) d[i] = s[i];
++	return dest;
++}
++
++/* ===========================================================================
++ * Fill the input buffer. This is called only when the buffer is empty
++ * and at least one byte is really needed.
++ */
++static int fill_inbuf(void)
++{
++	error("ran out of input data");
++	return 0;
++}
++
++
++// When using LZMA in callback, the compressed length is not needed.
++// Otherwise you need a special version of lzma compression program
++// which will pad the compressed length in the header.
++#define _LZMA_IN_CB
++#include "LzmaDecode.h"
++#include "LzmaDecode.c"
++
++static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize);
++
++
++/*
++ * Do the lzma decompression
++ * When using LZMA in callback, the end of input stream is automatically determined
++ */
++static int lzma_unzip(void)
++{
++
++	unsigned int i;  /* temp value */
++	unsigned int lc; /* literal context bits */
++	unsigned int lp; /* literal pos state bits */
++	unsigned int pb; /* pos state bits */
++	unsigned int uncompressedSize = 0;
++	unsigned char* p;
++	
++	ILzmaInCallback callback;
++	callback.Read = read_byte;
++
++	/* lzma args */
++	i = get_byte();
++	lc = i % 9, i = i / 9;
++	lp = i % 5, pb = i / 5;
++	
++	/* skip dictionary size */
++	for (i = 0; i < 4; i++) 
++		get_byte();
++	// get uncompressedSize 	
++	p= (char*)&uncompressedSize;	
++	for (i = 0; i < 4; i++) 
++	    *p++ = get_byte();
++	    
++	//get compressedSize 
++	for (i = 0; i < 4; i++) 
++		get_byte();
++	
++	// point it beyond uncompresedSize
++	//workspace = window + uncompressedSize;
++	
++	/* decompress kernel */
++	if (LzmaDecode((unsigned char*)workspace, ~0, lc, lp, pb, &callback,
++		(unsigned char*)window, uncompressedSize, &i) == LZMA_RESULT_OK)
++		return 0;
++	else
++		return 1;
++}
++
++
++#ifdef  _LZMA_IN_CB
++static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
++{
++	static unsigned int i = 0;
++	static unsigned char val;
++	*bufferSize = 1;
++	val = get_byte();
++	*buffer = &val;
++	return LZMA_RESULT_OK;
++}	
++#endif
++
++static void error(char *x)
++{
++	while(1);	/* Halt */
++}
++
++asmlinkage void decompress_kernel(void *rmode, unsigned long end,
++			uch *input_data, unsigned long input_len, uch *output)
++{
++	real_mode = rmode;
++
++	window = output;
++	inbuf  = input_data;	/* Input buffer */
++	insize = input_len;
++	inptr  = 0;
++
++	if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
++		error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
++	if ((workspace = end) > ((-__PAGE_OFFSET-(512 <<20)-1) & 0x7fffffff))
++		error("Destination address too large");
++#ifndef CONFIG_RELOCATABLE
++	if ((u32)output != LOAD_PHYSICAL_ADDR)
++		error("Wrong destination address");
++#endif
++
++	lzma_unzip();
++	return;
++}
+diff -Naur linux-old/arch/i386/boot/compressed/Makefile linux-lzma/arch/i386/boot/compressed/Makefile
+--- linux-old/arch/i386/boot/compressed/Makefile	2005-06-04 21:53:40.000000000 -0400
++++ linux-lzma/arch/i386/boot/compressed/Makefile	2005-06-05 00:25:23.000000000 -0400
+@@ -4,7 +4,7 @@
+ # create a compressed vmlinux image from the original vmlinux
+ #
+ 
+-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o \
++targets		:= vmlinux vmlinux.bin vmlinux.bin.lzma head.o lzma_misc.o piggy.o \
+ 			vmlinux.bin.all vmlinux.relocs
+ EXTRA_AFLAGS	:= -traditional
+ 
+@@ -17,7 +17,7 @@
+ 	   $(call cc-option,-fno-stack-protector)
+ LDFLAGS := -m elf_i386
+ 
+-$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
++$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE
+ 	$(call if_changed,ld)
+ 	@:
+ 
+@@ -37,14 +37,14 @@
+ 	$(call if_changed,relocbin)
+ 
+ ifdef CONFIG_RELOCATABLE
+-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
+-	$(call if_changed,gzip)
++$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
++	$(call if_changed,lzma)
+ else
+-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+-	$(call if_changed,gzip)
++$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
++	$(call if_changed,lzma)
+ endif
+ 
+ LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
+ 
+-$(obj)/piggy.o: $(src)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
++$(obj)/piggy.o: $(src)/vmlinux.scr $(obj)/vmlinux.bin.lzma FORCE
+ 	$(call if_changed,ld)
+diff -urN linux-2.6.19.2/scripts/Makefile.lib linux-2.6.19.2.new/scripts/Makefile.lib
+--- linux-2.6.19.2/scripts/Makefile.lib	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/scripts/Makefile.lib	2007-04-15 23:51:54.000000000 +0200
+@@ -162,4 +162,9 @@
+ quiet_cmd_gzip = GZIP    $@
+ cmd_gzip = gzip -f -9 < $< > $@
+ 
+-
++# LZMA
++#
++quiet_cmd_lzma = LZMA $@
++cmd_lzma = bash -e scripts/lzma_kern $< $@ -lc7 -lp0 -pb0
++# to use lzmacomp,
++# cmd_lzma = lzmacomp $< 700 > $@
+diff -u linux/scripts/lzma_kern linux/scripts/lzma_kern
+--- linux/scripts/lzma_kern	2007-07-27 20:18:17.013014750 -0700
++++ linux/scripts/lzma_kern	2007-07-27 20:18:17.013014750 -0700
+@@ -0,0 +1,4 @@
++get-size() { echo "$5" ;}
++printf -v len '%.8x' "$(get-size $(ls -l "$1"))"
++lzma e "$@"
++echo -ne "\x$(echo $len | cut -c 7,8)\x$(echo $len | cut -c 5,6)\x$(echo $len | cut -c 3,4)\x$(echo $len | cut -c 1,2)" >> "$2"
author	florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>	2008-06-28 11:06:32 +0000
committer	florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>	2008-06-28 11:06:32 +0000
commit	be07fabdd80da56125283caf3938b01d01e3b23e (patch)
tree	e6269f94b21d6d6e8d208b55f98cae7c23847a48
parent	e2a5cd999c401b7c6ef69db6df118eece9fecf3a (diff)