adm5120: make patches apply again and refresh them

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24800 3c298f89-4303-0410-b956-a3cf2f4a3e73

21 files changed, 63 insertions, 63 deletions

diff --git a/target/linux/adm5120/patches-2.6.32/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.32/007-adm5120_pci.patch
index 91bd79d761..b06d7947ce 100644
--- a/target/linux/adm5120/patches-2.6.32/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches-2.6.32/007-adm5120_pci.patch
@@ -10,7 +10,7 @@
  obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
 --- a/include/linux/pci_ids.h
 +++ b/include/linux/pci_ids.h
-@@ -1748,6 +1748,9 @@
+@@ -1752,6 +1752,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
  
diff --git a/target/linux/adm5120/patches-2.6.32/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.32/009-adm5120_leds_switch_trigger.patch
index 272fb8f19c..2f6eaf06e3 100644
--- a/target/linux/adm5120/patches-2.6.32/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches-2.6.32/009-adm5120_leds_switch_trigger.patch
@@ -1,8 +1,8 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -315,4 +315,12 @@ config LEDS_TRIGGER_NETDEV
- 	  This allows LEDs to be controlled by network device activity.
- 	  If unsure, say Y.
+@@ -322,4 +322,12 @@ config LEDS_TRIGGER_USBDEV
+ 	  This allows LEDs to be controlled by the presence/activity of
+ 	  an USB device. If unsure, say N.
  
 +config LEDS_TRIGGER_ADM5120_SWITCH
 +	tristate "LED ADM5120 Switch Port Status Trigger"
@@ -15,8 +15,8 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -42,3 +42,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledt
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+@@ -43,3 +43,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+=
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_USBDEV)	+= ledtrig-usbdev.o
 +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.34/001-adm5120.patch b/target/linux/adm5120/patches-2.6.34/001-adm5120.patch
index c6eec1e23f..c99399cb13 100644
--- a/target/linux/adm5120/patches-2.6.34/001-adm5120.patch
+++ b/target/linux/adm5120/patches-2.6.34/001-adm5120.patch
@@ -22,7 +22,7 @@
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  	select SYS_SUPPORTS_ZBOOT
-@@ -681,6 +696,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
+@@ -683,6 +698,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
  
  endchoice
  
@@ -32,7 +32,7 @@
  source "arch/mips/jazz/Kconfig"
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -214,6 +214,23 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctre
+@@ -227,6 +227,23 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctre
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
diff --git a/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch
index b06d7947ce..12d0f4aa9e 100644
--- a/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch
@@ -10,7 +10,7 @@
  obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
 --- a/include/linux/pci_ids.h
 +++ b/include/linux/pci_ids.h
-@@ -1752,6 +1752,9 @@
+@@ -1753,6 +1753,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
  
diff --git a/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch
index 0258fa4fbe..777476f3ef 100644
--- a/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch
@@ -1,8 +1,8 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -365,4 +365,12 @@ config LEDS_TRIGGER_NETDEV
- 	  This allows LEDs to be controlled by network device activity.
- 	  If unsure, say Y.
+@@ -372,4 +372,12 @@ config LEDS_TRIGGER_USBDEV
+ 	  This allows LEDs to be controlled by the presence/activity of
+ 	  an USB device. If unsure, say N.
  
 +config LEDS_TRIGGER_ADM5120_SWITCH
 +	tristate "LED ADM5120 Switch Port Status Trigger"
@@ -15,8 +15,8 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledt
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+@@ -49,3 +49,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+=
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_USBDEV)	+= ledtrig-usbdev.o
 +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch
index 43459328a4..5ecf166505 100644
--- a/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch
@@ -1,8 +1,8 @@
 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -53,6 +53,12 @@
+@@ -52,6 +52,12 @@
+ #define SST49LF008A		0x005a
  #define AT49BV6416		0x00d6
- #define MANUFACTURER_SAMSUNG	0x00ec
  
 +/* Macronix */
 +#define MX29LV160B	0x2249	/* MX29LV160 Bottom-boot chip */
@@ -13,7 +13,7 @@
  static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
  static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
  static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -283,6 +289,41 @@ static void fixup_s29gl032n_sectors(stru
+@@ -282,6 +288,41 @@ static void fixup_s29gl032n_sectors(stru
  	}
  }
  
@@ -55,7 +55,7 @@
  static struct cfi_fixup cfi_fixup_table[] = {
  	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
  #ifdef AMD_BOOTLOC_BUG
-@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] =
+@@ -318,6 +359,9 @@ static struct cfi_fixup fixup_table[] =
  	 */
  	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
  	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
diff --git a/target/linux/adm5120/patches-2.6.34/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.34/103-mtd_trxsplit.patch
index 69f1035505..ec4f6c5a40 100644
--- a/target/linux/adm5120/patches-2.6.34/103-mtd_trxsplit.patch
+++ b/target/linux/adm5120/patches-2.6.34/103-mtd_trxsplit.patch
@@ -14,7 +14,7 @@
  	depends on MTD_PARTITIONS
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o mtdbdi.
+@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o
  mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
  
  obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
diff --git a/target/linux/adm5120/patches-2.6.35/001-adm5120.patch b/target/linux/adm5120/patches-2.6.35/001-adm5120.patch
index c6eec1e23f..c99399cb13 100644
--- a/target/linux/adm5120/patches-2.6.35/001-adm5120.patch
+++ b/target/linux/adm5120/patches-2.6.35/001-adm5120.patch
@@ -22,7 +22,7 @@
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  	select SYS_SUPPORTS_ZBOOT
-@@ -681,6 +696,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
+@@ -683,6 +698,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
  
  endchoice
  
@@ -32,7 +32,7 @@
  source "arch/mips/jazz/Kconfig"
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -214,6 +214,23 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctre
+@@ -227,6 +227,23 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctre
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
diff --git a/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch
index b06d7947ce..fa8dd44e8a 100644
--- a/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch
@@ -10,7 +10,7 @@
  obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
 --- a/include/linux/pci_ids.h
 +++ b/include/linux/pci_ids.h
-@@ -1752,6 +1752,9 @@
+@@ -1756,6 +1756,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
  
diff --git a/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch
index 0258fa4fbe..fb65ef3f86 100644
--- a/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch
@@ -1,8 +1,8 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -365,4 +365,12 @@ config LEDS_TRIGGER_NETDEV
- 	  This allows LEDs to be controlled by network device activity.
- 	  If unsure, say Y.
+@@ -389,4 +389,12 @@ config LEDS_TRIGGER_USBDEV
+ 	  This allows LEDs to be controlled by the presence/activity of
+ 	  an USB device. If unsure, say N.
  
 +config LEDS_TRIGGER_ADM5120_SWITCH
 +	tristate "LED ADM5120 Switch Port Status Trigger"
@@ -15,8 +15,8 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledt
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+@@ -51,3 +51,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+=
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_USBDEV)	+= ledtrig-usbdev.o
 +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch
index ec7505c58d..31217c4721 100644
--- a/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch
@@ -1,8 +1,8 @@
 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -53,6 +53,12 @@
+@@ -49,6 +49,12 @@
+ #define SST49LF008A		0x005a
  #define AT49BV6416		0x00d6
- #define MANUFACTURER_SAMSUNG	0x00ec
  
 +/* Macronix */
 +#define MX29LV160B	0x2249	/* MX29LV160 Bottom-boot chip */
@@ -13,9 +13,9 @@
  static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
  static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
  static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -283,6 +289,41 @@ static void fixup_s29gl032n_sectors(stru
- 	}
- }
+@@ -329,6 +335,41 @@ static struct cfi_fixup cfi_nopri_fixup_
+ 	{ 0, 0, NULL, NULL }
+ };
  
 +#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
 +/*
@@ -55,7 +55,7 @@
  static struct cfi_fixup cfi_fixup_table[] = {
  	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
  #ifdef AMD_BOOTLOC_BUG
-@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] =
+@@ -365,6 +406,9 @@ static struct cfi_fixup fixup_table[] =
  	 */
  	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
  	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
diff --git a/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch
index 1e5d23a233..626cd85f20 100644
--- a/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch
+++ b/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/chips/jedec_probe.c
 +++ b/drivers/mtd/chips/jedec_probe.c
-@@ -133,6 +133,10 @@
+@@ -116,6 +116,10 @@
  #define UPD29F064115	0x221C
  
  /* PMC */
@@ -11,7 +11,7 @@
  #define PM49FL002	0x006D
  #define PM49FL004	0x006E
  #define PM49FL008	0x006A
-@@ -1275,6 +1279,54 @@ static const struct amd_flash_info jedec
+@@ -1273,6 +1277,54 @@ static const struct amd_flash_info jedec
  			ERASEINFO(0x02000,2),
  			ERASEINFO(0x04000,1),
  		}
diff --git a/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch
index 69f1035505..ec4f6c5a40 100644
--- a/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch
+++ b/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch
@@ -14,7 +14,7 @@
  	depends on MTD_PARTITIONS
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o mtdbdi.
+@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o
  mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
  
  obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
diff --git a/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch
index 5bb36432ab..9b486a7f9b 100644
--- a/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch
+++ b/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch
@@ -10,9 +10,9 @@
  obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
 --- a/drivers/ata/Kconfig
 +++ b/drivers/ata/Kconfig
-@@ -604,6 +604,15 @@ config PATA_RADISYS
- 
- 	  If unsure, say N.
+@@ -778,6 +778,15 @@ config PATA_QDI
+ 	help
+ 	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
  
 +config PATA_RB153_CF
 +	tristate "RouterBOARD 153 Compact Flash support"
diff --git a/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch
index 54c6468699..ac3c516353 100644
--- a/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch
+++ b/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch
@@ -1,6 +1,6 @@
 --- a/drivers/leds/leds-gpio.c
 +++ b/drivers/leds/leds-gpio.c
-@@ -45,13 +45,17 @@ static void gpio_led_set(struct led_clas
+@@ -52,13 +52,17 @@ static void gpio_led_set(struct led_clas
  		container_of(led_cdev, struct gpio_led_data, cdev);
  	int level;
  
diff --git a/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch
index 0c4e8e623c..bcc3230ac1 100644
--- a/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch
+++ b/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch
@@ -1,6 +1,6 @@
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -807,6 +807,18 @@ config RC32434_WDT
+@@ -825,6 +825,18 @@ config RC32434_WDT
  	  To compile this driver as a module, choose M here: the
  	  module will be called rc32434_wdt.
  
@@ -21,7 +21,7 @@
  	depends on SGI_HAS_INDYDOG
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
+@@ -114,6 +114,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
  obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
  obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
  obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
diff --git a/target/linux/adm5120/patches-2.6.36/001-adm5120.patch b/target/linux/adm5120/patches-2.6.36/001-adm5120.patch
index 4f183c49e7..b96307742a 100644
--- a/target/linux/adm5120/patches-2.6.36/001-adm5120.patch
+++ b/target/linux/adm5120/patches-2.6.36/001-adm5120.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -25,6 +25,21 @@ choice
+@@ -26,6 +26,21 @@ choice
  	prompt "System type"
  	default SGI_IP22
  
@@ -22,7 +22,7 @@
  config MIPS_ALCHEMY
  	bool "Alchemy processor based machines"
  	select 64BIT_PHYS_ADDR
-@@ -707,6 +722,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
+@@ -708,6 +723,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
  
  endchoice
  
diff --git a/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch
index d8443ed5fd..fb5fb83127 100644
--- a/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch
+++ b/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -491,6 +491,10 @@ config MIPS_AU1X00_ENET
+@@ -614,6 +614,10 @@ config MIPS_AU1X00_ENET
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
  
@@ -13,7 +13,7 @@
  	depends on PCI && SGI_IP27
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -212,6 +212,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+@@ -213,6 +213,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
  
diff --git a/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch
index a52dfac7a8..f8e550d9f8 100644
--- a/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch
@@ -1,8 +1,8 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -391,4 +391,12 @@ config LEDS_TRIGGER_NETDEV
- 	  This allows LEDs to be controlled by network device activity.
- 	  If unsure, say Y.
+@@ -398,4 +398,12 @@ config LEDS_TRIGGER_USBDEV
+ 	  This allows LEDs to be controlled by the presence/activity of
+ 	  an USB device. If unsure, say N.
  
 +config LEDS_TRIGGER_ADM5120_SWITCH
 +	tristate "LED ADM5120 Switch Port Status Trigger"
@@ -15,8 +15,8 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -51,3 +51,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledt
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+@@ -52,3 +52,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+=
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_USBDEV)	+= ledtrig-usbdev.o
 +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch
index 00148fa602..626cd85f20 100644
--- a/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch
+++ b/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/chips/jedec_probe.c
 +++ b/drivers/mtd/chips/jedec_probe.c
-@@ -115,6 +115,10 @@
+@@ -116,6 +116,10 @@
  #define UPD29F064115	0x221C
  
  /* PMC */
@@ -11,7 +11,7 @@
  #define PM49FL002	0x006D
  #define PM49FL004	0x006E
  #define PM49FL008	0x006A
-@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
+@@ -1273,6 +1277,54 @@ static const struct amd_flash_info jedec
  			ERASEINFO(0x02000,2),
  			ERASEINFO(0x04000,1),
  		}
diff --git a/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch
index b13d48f556..2f6eaf06e3 100644
--- a/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch
@@ -1,8 +1,8 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -400,4 +400,12 @@ config LEDS_TRIGGER_NETDEV
- 	  This allows LEDs to be controlled by network device activity.
- 	  If unsure, say Y.
+@@ -322,4 +322,12 @@ config LEDS_TRIGGER_USBDEV
+ 	  This allows LEDs to be controlled by the presence/activity of
+ 	  an USB device. If unsure, say N.
  
 +config LEDS_TRIGGER_ADM5120_SWITCH
 +	tristate "LED ADM5120 Switch Port Status Trigger"
@@ -15,8 +15,8 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -52,3 +52,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledt
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+@@ -43,3 +43,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+=
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_USBDEV)	+= ledtrig-usbdev.o
 +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o