summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-04-01 12:05:27 +0000
committerkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-04-01 12:05:27 +0000
commit23f27ea50bbe2cbdd0c260c7c6b78229a83d7996 (patch)
treea5cda6cdb0bffcdceb04c0066c69647b1bee39a8
parent38b25a187b7c5a833e6d8e5ba215f25043d2d3ab (diff)
[x86]: add a subtarget and drivers for the Intel Tolapai SoC
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20648 3c298f89-4303-0410-b956-a3cf2f4a3e73
-rw-r--r--package/ep80579-drivers/Makefile80
-rw-r--r--package/ep80579-drivers/patches/001-igbe_update.patch11755
-rw-r--r--package/ep80579-drivers/patches/002-cflags_cleanup.patch22
-rw-r--r--package/ep80579-drivers/patches/003-new_irqf_constants.patch53
-rw-r--r--package/ep80579-drivers/patches/100-iegbe_netdev_ops.patch56
-rw-r--r--package/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch41
-rw-r--r--package/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch103
-rw-r--r--package/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch60
-rw-r--r--package/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch20
-rw-r--r--package/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch20
-rw-r--r--package/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch12
-rw-r--r--package/ep80579-drivers/patches/150-ocracoke_island.patch747
-rw-r--r--package/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch11
-rw-r--r--package/ep80579-drivers/patches/210-can_include_linux_fs_h.patch11
-rw-r--r--package/ep80579-drivers/patches/220-can_fix_irq_request.patch23
-rw-r--r--package/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch41
-rw-r--r--package/ep80579-drivers/patches/300-wdt_compile_fix.patch59
-rw-r--r--package/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch22
-rw-r--r--package/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch22
-rw-r--r--package/ep80579-drivers/patches/600-2.6.27_includes.patch22
-rw-r--r--package/ep80579-drivers/patches/601-2.6.32_includes.patch33
-rw-r--r--package/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch31
-rw-r--r--package/ep80579-drivers/patches/701-iegbe_poll_dev.patch11
-rw-r--r--target/linux/generic-2.6/config-2.6.321
-rw-r--r--target/linux/x86/Makefile2
-rw-r--r--target/linux/x86/ep80579/config-default12
-rw-r--r--target/linux/x86/ep80579/target.mk9
27 files changed, 13278 insertions, 1 deletions
diff --git a/package/ep80579-drivers/Makefile b/package/ep80579-drivers/Makefile
new file mode 100644
index 0000000000..fac0fbbadf
--- /dev/null
+++ b/package/ep80579-drivers/Makefile
@@ -0,0 +1,80 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ep80579-drivers
+PKG_VERSION:=1.0.34
+PKG_RELEASE:=1
+
+PKG_SOURCE:=Embedded.L.1.0.34.ADI.R100.tar.gz
+PKG_SOURCE_URL:=ftp://ftp.adiengineering.com/Archive/OcracokeIsland/Drivers/Linux/1.0.34/
+PKG_MD5SUM:=61df9778f8c1f919257d2f48a0bcb000
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/ep80579-drivers/Default
+ DEPENDS:=@TARGET_x86
+endef
+
+define KernelPackage/ep80579-eth
+$(call KernelPackage/ep80579-drivers/Default)
+ SUBMENU:=Network Devices
+ TITLE:=Intel EP80579 ethernet driver
+ FILES:= \
+ $(PKG_BUILD_DIR)/Embedded/build/gcu.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/Embedded/build/iegbe.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,gcu iegbe)
+endef
+
+define KernelPackage/ep80579-misc
+$(call KernelPackage/ep80579-drivers/Default)
+ SUBMENU:=Other modules
+ TITLE:=Misc. Intel EP80579 drivers (DMA,, gpio)
+ FILES:= \
+ $(PKG_BUILD_DIR)/Embedded/build/dma.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/Embedded/build/gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,gpio dma)
+endef
+
+define KernelPackage/ep80579-can
+$(call KernelPackage/ep80579-drivers/Default)
+ SUBMENU:=Other modules
+ TITLE:=Intel EP80579 CAN driver
+ FILES:= \
+ $(PKG_BUILD_DIR)/Embedded/build/timesync.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/Embedded/build/can.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,timesync can)
+endef
+
+define Build/Prepare
+ rm -rf $(PKG_BUILD_DIR)
+ mkdir -p $(PKG_BUILD_DIR)
+ tar xzvf $(DL_DIR)/$(PKG_SOURCE) -C $(PKG_BUILD_DIR)/
+ $(Build/Patch)
+endef
+
+define Build/Compile
+ (cd $(PKG_BUILD_DIR)/Embedded; \
+ $(MAKE) KERNEL_SOURCE_ROOT=$(LINUX_DIR) \
+ KSRC=$(LINUX_DIR) \
+ KOBJ=$(LINUX_DIR) \
+ ENV_DIR=$(PKG_BUILD_DIR)/Embedded \
+ all \
+ )
+endef
+
+define KernelPackage/ep80579-eth/install
+endef
+
+$(eval $(call KernelPackage,ep80579-can))
+$(eval $(call KernelPackage,ep80579-eth))
+$(eval $(call KernelPackage,ep80579-misc))
+
diff --git a/package/ep80579-drivers/patches/001-igbe_update.patch b/package/ep80579-drivers/patches/001-igbe_update.patch
new file mode 100644
index 0000000000..67560b8ded
--- /dev/null
+++ b/package/ep80579-drivers/patches/001-igbe_update.patch
@@ -0,0 +1,11755 @@
+--- a/Embedded/src/GbE/gcu.h
++++ b/Embedded/src/GbE/gcu.h
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+--- a/Embedded/src/GbE/gcu_if.c
++++ b/Embedded/src/GbE/gcu_if.c
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+@@ -330,10 +330,17 @@ gcu_write_verify(uint32_t phy_num, uint3
+ */
+ void gcu_iegbe_resume(struct pci_dev *pdev)
+ {
++#if ( ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) ) && \
++ ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) )
++ struct net_device *netdev = pci_get_drvdata(pdev);
++ struct gcu_adapter *adapter = netdev_priv(netdev);
++#endif
++
+ GCU_DBG("%s\n", __func__);
+
+ pci_restore_state(pdev);
+- pci_enable_device(pdev);
++ if(!pci_enable_device(pdev))
++ GCU_DBG("pci_enable_device failed!\n",);
+
+ return;
+ }
+@@ -348,6 +355,12 @@ EXPORT_SYMBOL(gcu_iegbe_resume);
+ */
+ int gcu_iegbe_suspend(struct pci_dev *pdev, uint32_t state)
+ {
++#if ( ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) ) && \
++ ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) )
++ struct net_device *netdev = pci_get_drvdata(pdev);
++ struct gcu_adapter *adapter = netdev_priv(netdev);
++#endif
++
+ GCU_DBG("%s\n", __func__);
+
+ pci_save_state(pdev);
+--- a/Embedded/src/GbE/gcu_if.h
++++ b/Embedded/src/GbE/gcu_if.h
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+--- a/Embedded/src/GbE/gcu_main.c
++++ b/Embedded/src/GbE/gcu_main.c
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+@@ -94,6 +94,7 @@ static struct pci_driver gcu_driver = {
+
+ static struct gcu_adapter *global_adapter = 0;
+ static spinlock_t global_adapter_spinlock = SPIN_LOCK_UNLOCKED;
++static unsigned long g_intflags = 0;
+
+ MODULE_AUTHOR("Intel(R) Corporation");
+ MODULE_DESCRIPTION("Global Configuration Unit Driver");
+@@ -124,7 +125,7 @@ gcu_init_module(void)
+
+ printk(KERN_INFO "%s\n", gcu_copyright);
+
+- ret = pci_module_init(&gcu_driver);
++ ret = pci_register_driver(&gcu_driver);
+ if(ret >= 0) {
+ register_reboot_notifier(&gcu_notifier_reboot);
+ }
+@@ -199,8 +200,6 @@ gcu_probe(struct pci_dev *pdev,
+ return -ENOMEM;
+ }
+
+- SET_MODULE_OWNER(adapter);
+-
+ pci_set_drvdata(pdev, adapter);
+
+ adapter->pdev = pdev;
+@@ -238,7 +237,6 @@ gcu_probe(struct pci_dev *pdev,
+ return 0;
+ }
+
+-
+ /**
+ * gcu_probe_err - gcu_probe error handler
+ * @err: gcu_err_type
+@@ -295,7 +293,7 @@ gcu_notify_reboot(struct notifier_block
+ case SYS_DOWN:
+ case SYS_HALT:
+ case SYS_POWER_OFF:
+- while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
++ while((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
+ if(pci_dev_driver(pdev) == &gcu_driver){
+ gcu_suspend(pdev, 0x3);
+ }
+@@ -318,6 +316,11 @@ static int
+ gcu_suspend(struct pci_dev *pdev, uint32_t state)
+ {
+ /*struct gcu_adapter *adapter = pci_get_drvdata(pdev); */
++#if ( ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) ) && \
++ ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) )
++ struct net_device *netdev = pci_get_drvdata(pdev);
++ struct gcu_adapter *adapter = netdev_priv(netdev);
++#endif
+
+ GCU_DBG("%s\n", __func__);
+
+@@ -338,7 +341,6 @@ gcu_suspend(struct pci_dev *pdev, uint32
+ return state;
+ }
+
+-
+ /**
+ * alloc_gcu_adapter
+ *
+@@ -412,7 +414,7 @@ gcu_get_adapter(void)
+ return NULL;
+ }
+
+- spin_lock(&global_adapter_spinlock);
++ spin_lock_irqsave(&global_adapter_spinlock, g_intflags);
+
+ return global_adapter;
+ }
+@@ -437,7 +439,7 @@ gcu_release_adapter(const struct gcu_ada
+ *adapter = 0;
+ }
+
+- spin_unlock(&global_adapter_spinlock);
++ spin_unlock_irqrestore(&global_adapter_spinlock, g_intflags);
+
+ return;
+ }
+--- a/Embedded/src/GbE/gcu_reg.h
++++ b/Embedded/src/GbE/gcu_reg.h
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+--- a/Embedded/src/GbE/iegbe.7
++++ b/Embedded/src/GbE/iegbe.7
+@@ -1,7 +1,7 @@
+
+ .\" GPL LICENSE SUMMARY
+ .\"
+-.\" Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++.\" Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ .\"
+ .\" This program is free software; you can redistribute it and/or modify
+ .\" it under the terms of version 2 of the GNU General Public License as
+@@ -21,7 +21,7 @@
+ .\" Contact Information:
+ .\" Intel Corporation
+ .\"
+-.\" version: Embedded.L.1.0.34
++.\" version: Embedded.Release.Patch.L.1.0.7-5
+
+ .\" LICENSE
+ .\"
+--- a/Embedded/src/GbE/iegbe_ethtool.c
++++ b/Embedded/src/GbE/iegbe_ethtool.c
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+@@ -132,22 +132,6 @@ static const struct iegbe_stats iegbe_gs
+ { "cpp_master", E1000_STAT(icr_cpp_master) },
+ { "stat", E1000_STAT(icr_stat) },
+ #endif
+-#ifdef IEGBE_GBE_WORKAROUND
+- { "txqec", E1000_STAT(stats.txqec) },
+- { "tx_next_to_clean", E1000_STAT(stats.tx_next_to_clean) },
+- { "tx_next_to_use", E1000_STAT(stats.tx_next_to_use) },
+- { "num_tx_queues", E1000_STAT(stats.num_tx_queues) },
+-
+- { "num_rx_buf_alloc", E1000_STAT(stats.num_rx_buf_alloc) },
+- { "rx_next_to_clean", E1000_STAT(stats.rx_next_to_clean) },
+- { "rx_next_to_use", E1000_STAT(stats.rx_next_to_use) },
+- { "cc_gt_num_rx", E1000_STAT(stats.cc_gt_num_rx) },
+- { "tx_hnet", E1000_STAT(stats.tx_hnet) },
+- { "tx_hnentu", E1000_STAT(stats.tx_hnentu) },
+- { "RUC", E1000_STAT(stats.ruc) },
+- { "RFC", E1000_STAT(stats.rfc) },
+-
+-#endif
+ };
+ #define E1000_STATS_LEN \
+ sizeof(iegbe_gstrings_stats) / sizeof(struct iegbe_stats)
+@@ -158,7 +142,7 @@ static const char iegbe_gstrings_test[][
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+ };
+-#define E1000_TEST_LEN (sizeof(iegbe_gstrings_test) / (ETH_GSTRING_LEN))
++#define E1000_TEST_LEN (sizeof(iegbe_gstrings_test) / ETH_GSTRING_LEN)
+ #endif /* ETHTOOL_TEST */
+
+ #define E1000_REGS_LEN 0x20
+@@ -176,9 +160,7 @@ iegbe_get_settings(struct net_device *ne
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+-#ifndef IEGBE_10_100_ONLY
+ SUPPORTED_1000baseT_Full|
+-#endif
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+
+@@ -259,21 +241,13 @@ iegbe_set_settings(struct net_device *ne
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+-#ifndef IEGBE_10_100_ONLY
+ ADVERTISED_1000baseT_Full|
+-#endif
+-
+ ADVERTISED_Autoneg |
+ ADVERTISED_TP;
+ ecmd->advertising = hw->autoneg_advertised;
+ }
+- } else {
+- uint16_t duplex;
+-
+- // ethtool uses DUPLEX_FULL/DUPLEX_HALF
+- // the driver needs FULL_DUPLEX/HALF_DUPLEX
+- duplex = (ecmd->duplex == DUPLEX_FULL) ? FULL_DUPLEX : HALF_DUPLEX;
+- if(iegbe_set_spd_dplx(adapter, ecmd->speed + duplex))
++ } else
++ if(iegbe_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)){
+ return -EINVAL;
+ }
+ /* reset the link */
+@@ -728,8 +702,8 @@ iegbe_set_ringparam(struct net_device *n
+ struct iegbe_rx_ring *rxdr, *rx_old, *rx_new;
+ int i, err, tx_ring_size, rx_ring_size;
+
+- tx_ring_size = sizeof(struct iegbe_tx_ring) * adapter->num_queues;
+- rx_ring_size = sizeof(struct iegbe_rx_ring) * adapter->num_queues;
++ tx_ring_size = sizeof(struct iegbe_tx_ring) * adapter->num_tx_queues;
++ rx_ring_size = sizeof(struct iegbe_rx_ring) * adapter->num_rx_queues;
+
+ if (netif_running(adapter->netdev)){
+ iegbe_down(adapter);
+@@ -768,10 +742,10 @@ iegbe_set_ringparam(struct net_device *n
+ E1000_MAX_TXD : E1000_MAX_82544_TXD));
+ E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+- for (i = 0; i < adapter->num_queues; i++) {
+- txdr[i].count = txdr->count;
+- rxdr[i].count = rxdr->count;
+- }
++ for (i = 0; i < adapter->num_tx_queues; i++)
++ txdr[i].count = txdr->count;
++ for (i = 0; i < adapter->num_rx_queues; i++)
++ rxdr[i].count = rxdr->count;
+
+ if(netif_running(adapter->netdev)) {
+ /* Try to get new resources before deleting old */
+@@ -950,8 +924,7 @@ iegbe_eeprom_test(struct iegbe_adapter *
+
+ static irqreturn_t
+ iegbe_test_intr(int irq,
+- void *data,
+- struct pt_regs *regs)
++ void *data)
+ {
+ struct net_device *netdev = (struct net_device *) data;
+ struct iegbe_adapter *adapter = netdev_priv(netdev);
+@@ -973,7 +946,7 @@ iegbe_intr_test(struct iegbe_adapter *ad
+ /* Hook up test interrupt handler just for this test */
+ if(!request_irq(irq, &iegbe_test_intr, 0, netdev->name, netdev)) {
+ shared_int = FALSE;
+- } else if(request_irq(irq, &iegbe_test_intr, SA_SHIRQ,
++ } else if(request_irq(irq, &iegbe_test_intr, IRQF_SHARED,
+ netdev->name, netdev)){
+ *data = 1;
+ return -1;
+@@ -1393,7 +1366,7 @@ iegbe_set_phy_loopback(struct iegbe_adap
+ * attempt this 10 times.
+ */
+ while(iegbe_nonintegrated_phy_loopback(adapter) &&
+- count++ < 0xa) { };
++ count++ < 0xa);
+ if(count < 0xb) {
+ return 0;
+ }
+--- a/Embedded/src/GbE/iegbe.h
++++ b/Embedded/src/GbE/iegbe.h
+@@ -1,7 +1,7 @@
+ /*******************************************************************************
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -21,7 +21,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+@@ -127,9 +127,12 @@ struct iegbe_adapter;
+ #define E1000_MIN_RXD 80
+ #define E1000_MAX_82544_RXD 4096
+
++#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+ /* Supported Rx Buffer Sizes */
+ #define E1000_RXBUFFER_128 128 /* Used for packet split */
+ #define E1000_RXBUFFER_256 256 /* Used for packet split */
++#define E1000_RXBUFFER_512 512
++#define E1000_RXBUFFER_1024 1024
+ #define E1000_RXBUFFER_2048 2048
+ #define E1000_RXBUFFER_4096 4096
+ #define E1000_RXBUFFER_8192 8192
+@@ -164,11 +167,9 @@ struct iegbe_adapter;
+ #define E1000_MASTER_SLAVE iegbe_ms_hw_default
+ #endif
+
+-#ifdef NETIF_F_HW_VLAN_TX
+-#define E1000_MNG_VLAN_NONE -1
+-#endif
++#define E1000_MNG_VLAN_NONE (-1)
+ /* Number of packet split data buffers (not including the header buffer) */
+-#define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1
++#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
+
+ /* only works for sizes that are powers of 2 */
+ #define E1000_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1)))
+@@ -206,6 +207,7 @@ struct iegbe_tx_ring {
+ spinlock_t tx_lock;
+ uint16_t tdh;
+ uint16_t tdt;
++ boolean_t last_tx_tso;
+ uint64_t pkt;
+ };
+
+@@ -228,6 +230,9 @@ struct iegbe_rx_ring {
+ struct iegbe_ps_page *ps_page;
+ struct iegbe_ps_page_dma *ps_page_dma;
+
++ /* cpu for rx queue */
++ int cpu;
++
+ uint16_t rdh;
+ uint16_t rdt;
+ uint64_t pkt;
+@@ -252,10 +257,8 @@ struct iegbe_adapter {
+ struct timer_list tx_fifo_stall_timer;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+-#ifdef NETIF_F_HW_VLAN_TX
+ struct vlan_group *vlgrp;
+ uint16_t mng_vlan_id;
+-#endif
+ uint32_t bd_number;
+ uint32_t rx_buffer_len;
+ uint32_t part_num;
+@@ -265,8 +268,18 @@ struct iegbe_adapter {
+ uint16_t link_speed;
+ uint16_t link_duplex;
+ spinlock_t stats_lock;
+- atomic_t irq_sem;
+- struct work_struct tx_timeout_task;
++ spinlock_t tx_queue_lock;
++ unsigned int total_tx_bytes;
++ unsigned int total_tx_packets;
++ unsigned int total_rx_bytes;
++ unsigned int total_rx_packets;
++ /* Interrupt Throttle Rate */
++ uint32_t itr;
++ uint32_t itr_setting;
++ uint16_t tx_itr;
++ uint16_t rx_itr;
++
++ struct work_struct reset_task;
+ uint8_t fc_autoneg;
+
+ #ifdef ETHTOOL_PHYS_ID
+@@ -276,9 +289,8 @@ struct iegbe_adapter {
+
+ /* TX */
+ struct iegbe_tx_ring *tx_ring; /* One per active queue */
+-#ifdef CONFIG_E1000_MQ
+- struct iegbe_tx_ring **cpu_tx_ring; /* per-cpu */
+-#endif
++ unsigned int restart_queue;
++ unsigned long tx_queue_len;
+ uint32_t txd_cmd;
+ uint32_t tx_int_delay;
+ uint32_t tx_abs_int_delay;
+@@ -286,46 +298,33 @@ struct iegbe_adapter {
+ uint64_t gotcl_old;
+ uint64_t tpt_old;
+ uint64_t colc_old;
++ uint32_t tx_timeout_count;
+ uint32_t tx_fifo_head;
+ uint32_t tx_head_addr;
+ uint32_t tx_fifo_size;
++ uint8_t tx_timeout_factor;
+ atomic_t tx_fifo_stall;
+ boolean_t pcix_82544;
+ boolean_t detect_tx_hung;
+
+ /* RX */
+-#ifdef CONFIG_E1000_NAPI
+- boolean_t (*clean_rx) (struct iegbe_adapter *adapter,
++ bool (*clean_rx)(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+-#else
+- boolean_t (*clean_rx) (struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring);
+-#endif
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+ void (*alloc_rx_buf) (struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring,
+- int cleaned_count);
+-#else
+- void (*alloc_rx_buf) (struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring);
+-#endif
+-
++ struct iegbe_rx_ring *rx_ring,
++ int cleaned_count);
+ struct iegbe_rx_ring *rx_ring; /* One per active queue */
+-#ifdef CONFIG_E1000_NAPI
++ struct napi_struct napi;
+ struct net_device *polling_netdev; /* One per active queue */
+-#endif
+-#ifdef CONFIG_E1000_MQ
+- struct net_device **cpu_netdev; /* per-cpu */
+- struct call_async_data_struct rx_sched_call_data;
+- int cpu_for_queue[4];
+-#endif
+- int num_queues;
++
++ int num_tx_queues;
++ int num_rx_queues;
+
+ uint64_t hw_csum_err;
+ uint64_t hw_csum_good;
+ uint64_t rx_hdr_split;
++ uint32_t alloc_rx_buff_failed;
+ uint32_t rx_int_delay;
+ uint32_t rx_abs_int_delay;
+ boolean_t rx_csum;
+@@ -334,8 +333,6 @@ struct iegbe_adapter {
+ uint64_t gorcl_old;
+ uint16_t rx_ps_bsize0;
+
+- /* Interrupt Throttle Rate */
+- uint32_t itr;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+@@ -378,7 +375,21 @@ struct iegbe_adapter {
+ #ifdef CONFIG_PCI_MSI
+ boolean_t have_msi;
+ #endif
+-#define IEGBE_INTD_DISABLE 0x0400
++ /* to not mess up cache alignment, always add to the bottom */
++ boolean_t tso_force;
++ boolean_t smart_power_down; /* phy smart power down */
++ boolean_t quad_port_a;
++ unsigned long flags;
++ uint32_t eeprom_wol;
++ int bars;
++ int need_ioport;
+ };
++
++enum iegbe_state_t {
++ __E1000_TESTING,
++ __E1000_RESETTING,
++ __E1000_DOWN
++};
++#define IEGBE_INTD_DISABLE 0x0400
+ #endif /* _IEGBE_H_ */
+
+--- a/Embedded/src/GbE/iegbe_hw.c
++++ b/Embedded/src/GbE/iegbe_hw.c
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+@@ -2115,7 +2115,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
+
+ ret_val = iegbe_oem_set_trans_gasket(hw);
+ if(ret_val){
+- return ret_val;
++ return ret_val;
+ }
+ ret_val = iegbe_oem_phy_is_full_duplex(
+ hw, (int *) &is_FullDuplex);
+@@ -2164,7 +2164,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
+ }
+ /* Write the configured values back to the Device Control Reg. */
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+- return E1000_SUCCESS;
++ return ret_val;
+ }
+
+ /*****************************************************************************
+@@ -2684,7 +2684,7 @@ iegbe_check_for_link(struct iegbe_hw *hw
+
+ if(hw->autoneg_failed == 0) {
+ hw->autoneg_failed = 1;
+- return 0;
++ return E1000_SUCCESS;
+ }
+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\r\n");
+
+@@ -5875,7 +5875,7 @@ iegbe_get_cable_length(struct iegbe_hw *
+ max_agc = cur_agc;
+ }
+ }
+-
++
+ /* This is to fix a Klockwork defect, that the array index might
+ * be out of bounds. 113 is table size */
+ if (cur_agc < 0x71){
+--- a/Embedded/src/GbE/iegbe_hw.h
++++ b/Embedded/src/GbE/iegbe_hw.h
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+@@ -299,7 +299,7 @@ void iegbe_set_media_type(struct iegbe_h
+ /* Link Configuration */
+ int32_t iegbe_setup_link(struct iegbe_hw *hw);
+ int32_t iegbe_phy_setup_autoneg(struct iegbe_hw *hw);
+-void iegbe_config_collision_dist(struct iegbe_hw *hw);
++void iegbe_config_collision_dist(struct iegbe_hw *hw);
+ int32_t iegbe_config_fc_after_link_up(struct iegbe_hw *hw);
+ int32_t iegbe_check_for_link(struct iegbe_hw *hw);
+ int32_t iegbe_get_speed_and_duplex(struct iegbe_hw *hw, uint16_t * speed, uint16_t * duplex);
+@@ -588,14 +588,6 @@ uint8_t iegbe_arc_subsystem_valid(struct
+ * o LSC = Link Status Change
+ */
+
+-#ifdef IEGBE_GBE_WORKAROUND
+-#define IMS_ENABLE_MASK ( \
+- E1000_IMS_RXT0 | \
+- E1000_IMS_TXQE | \
+- E1000_IMS_RXDMT0 | \
+- E1000_IMS_RXSEQ | \
+- E1000_IMS_LSC)
+-#else
+ #define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+@@ -606,8 +598,7 @@ uint8_t iegbe_arc_subsystem_valid(struct
+ E1000_ICR_PB | \
+ E1000_ICR_CPP_TARGET | \
+ E1000_ICR_CPP_MASTER | \
+- E1000_IMS_LSC)
+-#endif
++ E1000_ICR_LSC)
+
+ /* Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor. We
+@@ -923,10 +914,15 @@ struct iegbe_ffvt_entry {
+ #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+ #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+ #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+-// Register conflict, does not exist for ICP_xxxx hardware
+-// #define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+ #define E1000_CTRL_AUX 0x000E0 /* Aux Control -RW */
++#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+ #define E1000_RCTL 0x00100 /* RX Control - RW */
++#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
++#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
++#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
++#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
++#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
++#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
+ #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+ #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+ #define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
+@@ -1282,8 +1278,6 @@ struct iegbe_ffvt_entry {
+ #define E1000_82542_FFMT E1000_FFMT
+ #define E1000_82542_FFVT E1000_FFVT
+ #define E1000_82542_HOST_IF E1000_HOST_IF
+-// Register conflict with ICP_xxxx hardware, no IAM
+-// #define E1000_82542_IAM E1000_IAM
+ #define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+ #define E1000_82542_PSRCTL E1000_PSRCTL
+ #define E1000_82542_RAID E1000_RAID
+@@ -1329,6 +1323,7 @@ struct iegbe_hw_stats {
+ uint64_t algnerrc;
+ uint64_t symerrs;
+ uint64_t rxerrc;
++ uint64_t txerrc;
+ uint64_t mpc;
+ uint64_t scc;
+ uint64_t ecol;
+@@ -1363,6 +1358,7 @@ struct iegbe_hw_stats {
+ uint64_t ruc;
+ uint64_t rfc;
+ uint64_t roc;
++ uint64_t rlerrc;
+ uint64_t rjc;
+ uint64_t mgprc;
+ uint64_t mgpdc;
+@@ -1392,19 +1388,6 @@ struct iegbe_hw_stats {
+ uint64_t ictxqmtc;
+ uint64_t icrxdmtc;
+ uint64_t icrxoc;
+-#ifdef IEGBE_GBE_WORKAROUND
+- u64 txqec;
+- u64 tx_next_to_clean;
+- u64 tx_next_to_use;
+- u64 cc_gt_num_rx;
+- u64 tx_hnet;
+- u64 tx_hnentu;
+- u64 num_tx_queues;
+-
+- u64 num_rx_buf_alloc;
+- u64 rx_next_to_clean;
+- u64 rx_next_to_use;
+-#endif
+ };
+
+ /* Structure containing variables used by the shared code (iegbe_hw.c) */
+@@ -1484,6 +1467,7 @@ struct iegbe_hw {
+ boolean_t ifs_params_forced;
+ boolean_t in_ifs_mode;
+ boolean_t mng_reg_access_disabled;
++ boolean_t rx_needs_kicking;
+ boolean_t icp_xxxx_is_link_up;
+ };
+
+@@ -2358,17 +2342,23 @@ struct iegbe_host_command_info {
+ #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
+ #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
+ #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
++#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
++#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+
+ /* PBA constants */
++#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
+ #define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
+ #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
++#define E1000_PBA_20K 0x0014
+ #define E1000_PBA_22K 0x0016
+ #define E1000_PBA_24K 0x0018
+ #define E1000_PBA_30K 0x001E
+ #define E1000_PBA_32K 0x0020
++#define E1000_PBA_34K 0x0022
+ #define E1000_PBA_38K 0x0026
+ #define E1000_PBA_40K 0x0028
+ #define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
++#define E1000_PBS_16K E1000_PBA_16K
+
+ /* Flow Control Constants */
+ #define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+@@ -2899,7 +2889,7 @@ struct iegbe_host_command_info {
+ #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
+ #define M88E1011_I_REV_4 0x04
+ #define M88E1111_I_PHY_ID 0x01410CC2
+-#define M88E1141_E_PHY_ID 0x01410CD4
++#define M88E1141_E_PHY_ID 0x01410CD0
+ #define L1LXT971A_PHY_ID 0x001378E0
+
+ /* Miscellaneous PHY bit definitions. */
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+@@ -42,103 +42,15 @@ GPL LICENSE SUMMARY
+
+ #include "iegbe.h"
+ #include "gcu_if.h"
+-
+-/* Change Log
+- * 6.0.58 4/20/05
+- * o iegbe_set_spd_dplx tests for compatible speed/duplex specification
+- * for fiber adapters
+- * 6.0.57 4/19/05
+- * o Added code to fix register test failure for devices >= 82571
+- *
+- * 6.0.52 3/15/05
+- * o Added stats_lock around iegbe_read_phy_reg commands to avoid concurrent
+- * calls, one from mii_ioctl and other from within update_stats while
+- * processing MIIREG ioctl.
+- *
+- * 6.1.2 4/13/05
+- * o Fixed ethtool diagnostics
+- * o Enabled flow control to take default eeprom settings
+- * o Added stats_lock around iegbe_read_phy_reg commands to avoid concurrent
+- * calls, one from mii_ioctl and other from within update_stats while processing
+- * MIIREG ioctl.
+- * 6.0.55 3/23/05
+- * o Support for MODULE_VERSION
+- * o Fix APM setting for 82544 based adapters
+- * 6.0.54 3/26/05
+- * o Added a timer to expire packets that were deferred for cleanup
+- * 6.0.52 3/15/05
+- * o Added stats_lock around iegbe_read_phy_reg commands to avoid concurrent
+- * calls, one from mii_ioctl and other from within update_stats while
+- * processing MIIREG ioctl.
+- * 6.0.47 3/2/05
+- * o Added enhanced functionality to the loopback diags to wrap the
+- * descriptor rings
+- * o Added manageability vlan filtering workaround.
+- *
+- * 6.0.44+ 2/15/05
+- * o Added code to handle raw packet based DHCP packets
+- * o Added code to fix the errata 10 buffer overflow issue
+- * o Sync up with WR01-05
+- * o applied Anton's patch to resolve tx hang in hardware
+- * o iegbe timeouts with early writeback patch
+- * o Removed Queensport IDs
+- * o fixed driver panic if MAC receives a bad large packets when packet
+- * split is enabled
+- * o Applied Andrew Mortons patch - iegbe stops working after resume
+- * 5.2.29 12/24/03
+- * o Bug fix: Endianess issue causing ethtool diags to fail on ppc.
+- * o Bug fix: Use pdev->irq instead of netdev->irq for MSI support.
+- * o Report driver message on user override of InterruptThrottleRate module
+- * parameter.
+- * o Bug fix: Change I/O address storage from uint32_t to unsigned long.
+- * o Feature: Added ethtool RINGPARAM support.
+- * o Feature: Added netpoll support.
+- * o Bug fix: Race between Tx queue and Tx clean fixed with a spin lock.
+- * o Bug fix: Allow 1000/Full setting for autoneg param for fiber connections.
+- * Jon D Mason [jonmason@us.ibm.com].
+- *
+- * 5.2.22 10/15/03
+- * o Bug fix: SERDES devices might be connected to a back-plane switch that
+- * doesn't support auto-neg, so add the capability to force 1000/Full.
+- * Also, since forcing 1000/Full, sample RxSynchronize bit to detect link
+- * state.
+- * o Bug fix: Flow control settings for hi/lo watermark didn't consider
+- * changes in the RX FIFO size, which could occur with Jumbo Frames or with
+- * the reduced FIFO in 82547.
+- * o Bug fix: Better propagation of error codes.
+- * [Janice Girouard (janiceg -a-t- us.ibm.com)]
+- * o Bug fix: hang under heavy Tx stress when running out of Tx descriptors;
+- * wasn't clearing context descriptor when backing out of send because of
+- * no-resource condition.
+- * o Bug fix: check netif_running in dev->poll so we don't have to hang in
+- * dev->close until all polls are finished. [Rober Olsson
+- * (robert.olsson@data.slu.se)].
+- * o Revert TxDescriptor ring size back to 256 since change to 1024 wasn't
+- * accepted into the kernel.
+- *
+- * 5.2.16 8/8/03
+- */
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+-#define IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS 1
+-#endif
++#include <linux/ipv6.h>
++#include <net/ip6_checksum.h>
+
+ char iegbe_driver_name[] = "iegbe";
+ char iegbe_driver_string[] = "Gigabit Ethernet Controller Driver";
+-#ifndef CONFIG_E1000_NAPI
+-#define DRIVERNAPI
+-#else
+-#define DRIVERNAPI "-NAPI"
+-#endif
+-#define DRV_VERSION "0.8.0"DRIVERNAPI
++#define DRV_VERSION "1.0.0-K28-NAPI"
+ char iegbe_driver_version[] = DRV_VERSION;
+-char iegbe_copyright[] = "Copyright (c) 1999-2007 Intel Corporation.";
++char iegbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
+
+-#define E1000_FIFO_HDR 0x10
+-#define E1000_82547_PAD_LEN 0x3E0
+-#define MINIMUM_DHCP_PACKET_SIZE 282
+-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+-#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+
+ /* iegbe_pci_tbl - PCI Device ID Table
+ *
+@@ -148,95 +60,48 @@ char iegbe_copyright[] = "Copyright (c)
+ * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+ */
+ static struct pci_device_id iegbe_pci_tbl[] = {
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1000), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1001), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1004), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1008), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1009), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x100C), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x100D), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x100E), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x100F), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1010), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1011), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1012), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1013), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1014), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1015), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1016), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1017), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1018), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1019), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x101A), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x101D), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x101E), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1026), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1027), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1028), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x105E), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x105F), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1060), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1075), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1076), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1077), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1078), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x1079), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x107A), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x107B), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x107C), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x107D), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x107E), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x107F), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x108A), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x108B), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x108C), */
+-/* INTEL_E1000_ETHERNET_DEVICE(0x109A), */
+- INTEL_E1000_ETHERNET_DEVICE(0x5040),
+- INTEL_E1000_ETHERNET_DEVICE(0x5041),
+- INTEL_E1000_ETHERNET_DEVICE(0x5042),
+- INTEL_E1000_ETHERNET_DEVICE(0x5043),
+- INTEL_E1000_ETHERNET_DEVICE(0x5044),
+- INTEL_E1000_ETHERNET_DEVICE(0x5045),
+- INTEL_E1000_ETHERNET_DEVICE(0x5046),
+- INTEL_E1000_ETHERNET_DEVICE(0x5047),
+- INTEL_E1000_ETHERNET_DEVICE(0x5048),
+- INTEL_E1000_ETHERNET_DEVICE(0x5049),
+- INTEL_E1000_ETHERNET_DEVICE(0x504A),
+- INTEL_E1000_ETHERNET_DEVICE(0x504B),
+- /* required last entry */
++ INTEL_E1000_ETHERNET_DEVICE(0x5040),
++ INTEL_E1000_ETHERNET_DEVICE(0x5041),
++ INTEL_E1000_ETHERNET_DEVICE(0x5042),
++ INTEL_E1000_ETHERNET_DEVICE(0x5043),
++ INTEL_E1000_ETHERNET_DEVICE(0x5044),
++ INTEL_E1000_ETHERNET_DEVICE(0x5045),
++ INTEL_E1000_ETHERNET_DEVICE(0x5046),
++ INTEL_E1000_ETHERNET_DEVICE(0x5047),
++ INTEL_E1000_ETHERNET_DEVICE(0x5048),
++ INTEL_E1000_ETHERNET_DEVICE(0x5049),
++ INTEL_E1000_ETHERNET_DEVICE(0x504A),
++ INTEL_E1000_ETHERNET_DEVICE(0x504B),
++ /* required last entry */
+ {0,}
+ };
+
+ MODULE_DEVICE_TABLE(pci, iegbe_pci_tbl);
+
+-DEFINE_SPINLOCK(print_lock);
+
+ int iegbe_up(struct iegbe_adapter *adapter);
+ void iegbe_down(struct iegbe_adapter *adapter);
++void iegbe_reinit_locked(struct iegbe_adapter *adapter);
+ void iegbe_reset(struct iegbe_adapter *adapter);
+ int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, uint16_t spddplx);
+ int iegbe_setup_all_tx_resources(struct iegbe_adapter *adapter);
+ int iegbe_setup_all_rx_resources(struct iegbe_adapter *adapter);
+ void iegbe_free_all_tx_resources(struct iegbe_adapter *adapter);
+ void iegbe_free_all_rx_resources(struct iegbe_adapter *adapter);
+-int iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
++static int iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
+ struct iegbe_tx_ring *txdr);
+-int iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
++static int iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rxdr);
+-void iegbe_free_tx_resources(struct iegbe_adapter *adapter,
++static void iegbe_free_tx_resources(struct iegbe_adapter *adapter,
+ struct iegbe_tx_ring *tx_ring);
+-void iegbe_free_rx_resources(struct iegbe_adapter *adapter,
++static void iegbe_free_rx_resources(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring);
+ void iegbe_update_stats(struct iegbe_adapter *adapter);
+-
+ static int iegbe_init_module(void);
+ static void iegbe_exit_module(void);
+ static int iegbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+ static void __devexit iegbe_remove(struct pci_dev *pdev);
+ static int iegbe_alloc_queues(struct iegbe_adapter *adapter);
+-#ifdef CONFIG_E1000_MQ
+-static void iegbe_setup_queue_mapping(struct iegbe_adapter *adapter);
+-#endif
+ static int iegbe_sw_init(struct iegbe_adapter *adapter);
+ static int iegbe_open(struct net_device *netdev);
+ static int iegbe_close(struct net_device *netdev);
+@@ -249,7 +114,8 @@ static void iegbe_clean_tx_ring(struct i
+ struct iegbe_tx_ring *tx_ring);
+ static void iegbe_clean_rx_ring(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring);
+-static void iegbe_set_multi(struct net_device *netdev);
++
++static void iegbe_set_rx_mode(struct net_device *netdev);
+ static void iegbe_update_phy_info(unsigned long data);
+ static void iegbe_watchdog(unsigned long data);
+ static void iegbe_82547_tx_fifo_stall(unsigned long data);
+@@ -257,66 +123,46 @@ static int iegbe_xmit_frame(struct sk_bu
+ static struct net_device_stats * iegbe_get_stats(struct net_device *netdev);
+ static int iegbe_change_mtu(struct net_device *netdev, int new_mtu);
+ static int iegbe_set_mac(struct net_device *netdev, void *p);
+-static irqreturn_t iegbe_intr(int irq, void *data, struct pt_regs *regs);
++static irqreturn_t iegbe_intr(int irq, void *data);
+
+-void iegbe_tasklet(unsigned long);
++static irqreturn_t iegbe_intr_msi(int irq, void *data);
+
+-#ifndef IEGBE_GBE_WORKAROUND
+-static boolean_t iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
++static bool iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
+ struct iegbe_tx_ring *tx_ring);
+-#endif
+-
+-#ifdef CONFIG_E1000_NAPI
+-static int iegbe_clean(struct net_device *poll_dev, int *budget);
+-static boolean_t iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
++static int iegbe_clean(struct napi_struct *napi, int budget);
++static bool iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+-static boolean_t iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
++static bool iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+-#else
+-static boolean_t iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring);
+-static boolean_t iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring);
+-#endif
+
+-#ifdef IEGBE_GBE_WORKAROUND
++
+ static void iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring,
+ int cleaned_count);
+ static void iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring,
+ int cleaned_count);
+-#else
+-static void iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring);
+-static void iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring);
+-#endif
++
+
+ static int iegbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+-#ifdef SIOCGMIIPHY
+ static int iegbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+- int cmd);
+-#endif
++ int cmd);
+ void set_ethtool_ops(struct net_device *netdev);
+ extern int ethtool_ioctl(struct ifreq *ifr);
+ static void iegbe_enter_82542_rst(struct iegbe_adapter *adapter);
+ static void iegbe_leave_82542_rst(struct iegbe_adapter *adapter);
+ static void iegbe_tx_timeout(struct net_device *dev);
+-static void iegbe_tx_timeout_task(struct net_device *dev);
++static void iegbe_reset_task(struct work_struct *work);
+ static void iegbe_smartspeed(struct iegbe_adapter *adapter);
+ static inline int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
+- struct sk_buff *skb);
++ struct sk_buff *skb);
+
+-#ifdef NETIF_F_HW_VLAN_TX
+-static void iegbe_vlan_rx_register(struct net_device *netdev,
+- struct vlan_group *grp);
++static void iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
+ static void iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
+ static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+ static void iegbe_restore_vlan(struct iegbe_adapter *adapter);
+-#endif
+
+ static int iegbe_notify_reboot(struct notifier_block *,
+ unsigned long event,
+@@ -331,15 +177,17 @@ static int iegbe_resume(struct pci_dev *
+ static void iegbe_netpoll (struct net_device *netdev);
+ #endif
+
+-#ifdef CONFIG_E1000_MQ
+-/* for multiple Rx queues */
++#define COPYBREAK_DEFAULT 256
++static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
++module_param(copybreak, uint, 0644);
++MODULE_PARM_DESC(copybreak,
++ "Maximum size of packet that is copied to a new buffer on receive");
+ void iegbe_rx_schedule(void *data);
+-#endif
+
+ struct notifier_block iegbe_notifier_reboot = {
+- .notifier_call = iegbe_notify_reboot,
+- .next = NULL,
+- .priority = 0
++ .notifier_call = iegbe_notify_reboot,
++ .next = NULL,
++ .priority = 0
+ };
+
+ /* Exported from other modules */
+@@ -347,14 +195,14 @@ struct notifier_block iegbe_notifier_reb
+ extern void iegbe_check_options(struct iegbe_adapter *adapter);
+
+ static struct pci_driver iegbe_driver = {
+- .name = iegbe_driver_name,
+- .id_table = iegbe_pci_tbl,
+- .probe = iegbe_probe,
+- .remove = __devexit_p(iegbe_remove),
+- /* Power Managment Hooks */
++ .name = iegbe_driver_name,
++ .id_table = iegbe_pci_tbl,
++ .probe = iegbe_probe,
++ .remove = __devexit_p(iegbe_remove),
++ /* Power Managment Hooks */
+ #ifdef CONFIG_PM
+- .suspend = iegbe_suspend,
+- .resume = iegbe_resume
++ .suspend = iegbe_suspend,
++ .resume = iegbe_resume
+ #endif
+ };
+
+@@ -364,46 +212,17 @@ MODULE_LICENSE("GPL");
+ MODULE_VERSION(DRV_VERSION);
+
+ static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+-module_param(debug, int, 0);
++module_param(debug, int, 0x0);
+ MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+-static uint8_t gcu_suspend = 0;
+-static uint8_t gcu_resume = 0;
++static uint8_t gcu_suspend = 0x0;
++static uint8_t gcu_resume = 0x0;
+ struct pci_dev *gcu = NULL;
+
+-unsigned long tasklet_data;
+-DECLARE_TASKLET(iegbe_reset_tasklet, iegbe_tasklet, (unsigned long) &tasklet_data);
+
+ /**
+ * iegbe_iegbe_tasklet -*
+ **/
+-void iegbe_tasklet(unsigned long data)
+-{
+- char* err_msg = "TEST";
+- uint32_t *icr = (uint32_t*) data;
+- uint32_t gbe = *icr & 0x000000FF;
+- if( *icr & E1000_ICR_RX_DESC_FIFO_PAR) { /* 21 */
+- err_msg = "DMA Transmit Descriptor 2-bit ECC Error!";
+- }
+- if( *icr & E1000_ICR_TX_DESC_FIFO_PAR) { /* 20 */
+- err_msg = "DMA Receive Descriptor 2-bit ECC Error!";
+- }
+- if( *icr & E1000_ICR_PB) { /* 23 */
+- err_msg = "DMA Packet Buffer 2-bit ECC Error!";
+- }
+- if( *icr & E1000_ICR_CPP_TARGET) { /* 27 */
+- err_msg = "Statistic Register ECC Error!";
+- }
+- if( *icr & E1000_ICR_CPP_MASTER) {
+- err_msg = "CPP Error!";
+- }
+- spin_lock(&print_lock);
+- printk("IEGBE%d: System Reset due to: %s\n", gbe, err_msg);
+- dump_stack();
+- spin_unlock(&print_lock);
+- panic(err_msg);
+- return;
+-}
+ /**
+ * iegbe_init_module - Driver Registration Routine
+ *
+@@ -411,21 +230,24 @@ void iegbe_tasklet(unsigned long data)
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+
+-static int __init
+-iegbe_init_module(void)
++static int __init iegbe_init_module(void)
+ {
+- int ret;
++ int ret;
+
+ printk(KERN_INFO "%s - version %s\n",
+- iegbe_driver_string, iegbe_driver_version);
++ iegbe_driver_string, iegbe_driver_version);
+
+- printk(KERN_INFO "%s\n", iegbe_copyright);
++ printk(KERN_INFO "%s\n", iegbe_copyright);
+
+- ret = pci_module_init(&iegbe_driver);
+- if(ret >= 0) {
+- register_reboot_notifier(&iegbe_notifier_reboot);
+- }
+- return ret;
++ ret = pci_register_driver(&iegbe_driver);
++ if (copybreak != COPYBREAK_DEFAULT) {
++ if (copybreak == 0)
++ printk(KERN_INFO "iegbe: copybreak disabled\n");
++ else
++ printk(KERN_INFO "iegbe: copybreak enabled for "
++ "packets <= %u bytes\n", copybreak);
++ }
++ return ret;
+ }
+
+ module_init(iegbe_init_module);
+@@ -437,29 +259,51 @@ module_init(iegbe_init_module);
+ * from memory.
+ **/
+
+-static void __exit
+-iegbe_exit_module(void)
++static void __exit iegbe_exit_module(void)
+ {
+-
+- unregister_reboot_notifier(&iegbe_notifier_reboot);
+- pci_unregister_driver(&iegbe_driver);
++ pci_unregister_driver(&iegbe_driver);
+ }
+
+ module_exit(iegbe_exit_module);
+
++static int iegbe_request_irq(struct iegbe_adapter *adapter)
++{
++ struct net_device *netdev = adapter->netdev;
++ irq_handler_t handler = iegbe_intr;
++ int irq_flags = IRQF_SHARED;
++ int err;
++ adapter->have_msi = !pci_enable_msi(adapter->pdev);
++ if (adapter->have_msi) {
++ handler = iegbe_intr_msi;
++ irq_flags = 0;
++ }
++ err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
++ netdev);
++ if (err) {
++ if (adapter->have_msi)
++ pci_disable_msi(adapter->pdev);
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate interrupt Error: %d\n", err);
++ }
++ return err;
++}
++static void iegbe_free_irq(struct iegbe_adapter *adapter)
++{
++ struct net_device *netdev = adapter->netdev;
++ free_irq(adapter->pdev->irq, netdev);
++ if (adapter->have_msi)
++ pci_disable_msi(adapter->pdev);
++}
+ /**
+ * iegbe_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+
+-static inline void
+-iegbe_irq_disable(struct iegbe_adapter *adapter)
++static void iegbe_irq_disable(struct iegbe_adapter *adapter)
+ {
+-
+- atomic_inc(&adapter->irq_sem);
+- E1000_WRITE_REG(&adapter->hw, IMC, ~0);
+- E1000_WRITE_FLUSH(&adapter->hw);
+- synchronize_irq(adapter->pdev->irq);
++ E1000_WRITE_REG(&adapter->hw, IMC, ~0);
++ E1000_WRITE_FLUSH(&adapter->hw);
++ synchronize_irq(adapter->pdev->irq);
+ }
+
+ /**
+@@ -470,244 +314,414 @@ iegbe_irq_disable(struct iegbe_adapter *
+ static inline void
+ iegbe_irq_enable(struct iegbe_adapter *adapter)
+ {
+-
+- if(likely(atomic_dec_and_test(&adapter->irq_sem))) {
+- E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
+- E1000_WRITE_FLUSH(&adapter->hw);
+- }
++ E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
++ E1000_WRITE_FLUSH(&adapter->hw);
+ }
+-#ifdef NETIF_F_HW_VLAN_TX
+-void
+-iegbe_update_mng_vlan(struct iegbe_adapter *adapter)
+-{
+- struct net_device *netdev = adapter->netdev;
+- uint16_t vid = adapter->hw.mng_cookie.vlan_id;
+- uint16_t old_vid = adapter->mng_vlan_id;
+
+- if(adapter->vlgrp) {
+- if(!adapter->vlgrp->vlan_devices[vid]) {
+- if(adapter->hw.mng_cookie.status &
+- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
+- iegbe_vlan_rx_add_vid(netdev, vid);
+- adapter->mng_vlan_id = vid;
+- } else {
+- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+- }
+- if((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
+- (vid != old_vid) &&
+- !adapter->vlgrp->vlan_devices[old_vid]) {
+- iegbe_vlan_rx_kill_vid(netdev, old_vid);
+- }
+- }
+-}
++static void iegbe_update_mng_vlan(struct iegbe_adapter *adapter)
++{
++ struct iegbe_hw *hw = &adapter->hw;
++ struct net_device *netdev = adapter->netdev;
++ u16 vid = hw->mng_cookie.vlan_id;
++ u16 old_vid = adapter->mng_vlan_id;
++ if (adapter->vlgrp) {
++ if (!vlan_group_get_device(adapter->vlgrp, vid)) {
++ if (hw->mng_cookie.status &
++ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
++ iegbe_vlan_rx_add_vid(netdev, vid);
++ adapter->mng_vlan_id = vid;
++ } else
++ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
++
++ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
++ (vid != old_vid) &&
++ !vlan_group_get_device(adapter->vlgrp, old_vid))
++ iegbe_vlan_rx_kill_vid(netdev, old_vid);
++ } else
++ adapter->mng_vlan_id = vid;
++ }
+ }
+-#endif
+
+-int
+-iegbe_up(struct iegbe_adapter *adapter)
++/**
++ * iegbe_configure - configure the hardware for RX and TX
++ * @adapter = private board structure
++ **/
++static void iegbe_configure(struct iegbe_adapter *adapter)
+ {
+ struct net_device *netdev = adapter->netdev;
+- int i, err;
+- uint16_t pci_cmd;
+-
+- /* hardware has been reset, we need to reload some things */
+-
+- /* Reset the PHY if it was previously powered down */
+- if(adapter->hw.media_type == iegbe_media_type_copper
+- || (adapter->hw.media_type == iegbe_media_type_oem
+- && iegbe_oem_phy_is_copper(&adapter->hw))) {
+- uint16_t mii_reg;
+- iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+- if(mii_reg & MII_CR_POWER_DOWN){
+- iegbe_phy_reset(&adapter->hw);
+- }
+- }
++ int i;
+
+- iegbe_set_multi(netdev);
++ iegbe_set_rx_mode(netdev);
+
+-#ifdef NETIF_F_HW_VLAN_TX
+ iegbe_restore_vlan(adapter);
+-#endif
+
+ iegbe_configure_tx(adapter);
+ iegbe_setup_rctl(adapter);
+ iegbe_configure_rx(adapter);
++ /* call E1000_DESC_UNUSED which always leaves
++ * at least 1 descriptor unused to make sure
++ * next_to_use != next_to_clean */
++ for (i = 0; i < adapter->num_rx_queues; i++) {
++ struct iegbe_rx_ring *ring = &adapter->rx_ring[i];
++ adapter->alloc_rx_buf(adapter, ring,
++ E1000_DESC_UNUSED(ring));
++ }
+
+-#ifdef IEGBE_GBE_WORKAROUND
+- for (i = 0; i < adapter->num_queues; i++)
+- adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i],
+- IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS + 1);
+-#else
+- for (i = 0; i < adapter->num_queues; i++)
+- adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]);
+-#endif
++ adapter->tx_queue_len = netdev->tx_queue_len;
++}
+
+-#ifdef CONFIG_PCI_MSI
+- if(adapter->hw.mac_type > iegbe_82547_rev_2
+- || adapter->hw.mac_type == iegbe_icp_xxxx) {
+- adapter->have_msi = TRUE;
+- if((err = pci_enable_msi(adapter->pdev))) {
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate MSI interrupt Error: %d\n", err);
+- adapter->have_msi = FALSE;
+- }
+- }
+- pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+- pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd | IEGBE_INTD_DISABLE);
++int iegbe_up(struct iegbe_adapter *adapter)
++{
++ /* hardware has been reset, we need to reload some things */
++ iegbe_configure(adapter);
+
+-#endif
+- if((err = request_irq(adapter->pdev->irq, &iegbe_intr,
+- SA_SHIRQ | SA_SAMPLE_RANDOM,
+- netdev->name, netdev))) {
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate interrupt Error: %d\n", err);
+- return err;
+- }
++ clear_bit(__E1000_DOWN, &adapter->flags);
+
+- mod_timer(&adapter->watchdog_timer, jiffies);
++ napi_enable(&adapter->napi);
+
+-#ifdef CONFIG_E1000_NAPI
+- netif_poll_enable(netdev);
+-#endif
+ iegbe_irq_enable(adapter);
+
++ adapter->hw.get_link_status = 0x1;
+ return 0;
+ }
+
+-void
+-iegbe_down(struct iegbe_adapter *adapter)
+-{
+- struct net_device *netdev = adapter->netdev;
+-
+- iegbe_irq_disable(adapter);
+-#ifdef CONFIG_E1000_MQ
+- while (atomic_read(&adapter->rx_sched_call_data.count) != 0) { };
+-#endif
+- free_irq(adapter->pdev->irq, netdev);
+-#ifdef CONFIG_PCI_MSI
+- if((adapter->hw.mac_type > iegbe_82547_rev_2
+- || adapter->hw.mac_type == iegbe_icp_xxxx)
+- && adapter->have_msi == TRUE) {
+- pci_disable_msi(adapter->pdev);
+- }
+-#endif
+- del_timer_sync(&adapter->tx_fifo_stall_timer);
+- del_timer_sync(&adapter->watchdog_timer);
+- del_timer_sync(&adapter->phy_info_timer);
++/**
++ * iegbe_power_up_phy - restore link in case the phy was powered down
++ * @adapter: address of board private structure
++ *
++ * The phy may be powered down to save power and turn off link when the
++ * driver is unloaded and wake on lan is not enabled (among others)
++ * *** this routine MUST be followed by a call to iegbe_reset ***
++ *
++ **/
+
+-#ifdef CONFIG_E1000_NAPI
+- netif_poll_disable(netdev);
+-#endif
+- adapter->link_speed = 0;
+- adapter->link_duplex = 0;
+- netif_carrier_off(netdev);
+- netif_stop_queue(netdev);
++void iegbe_power_up_phy(struct iegbe_adapter *adapter)
++{
++ struct iegbe_hw *hw = &adapter->hw;
++ u16 mii_reg = 0;
+
+- iegbe_reset(adapter);
+- iegbe_clean_all_tx_rings(adapter);
+- iegbe_clean_all_rx_rings(adapter);
++ /* Just clear the power down bit to wake the phy back up */
++ if (hw->media_type == iegbe_media_type_copper) {
++ /* according to the manual, the phy will retain its
++ * settings across a power-down/up cycle */
++ iegbe_read_phy_reg(hw, PHY_CTRL, &mii_reg);
++ mii_reg &= ~MII_CR_POWER_DOWN;
++ iegbe_write_phy_reg(hw, PHY_CTRL, mii_reg);
++ }
++}
+
+- /* If WoL is not enabled and management mode is not IAMT
+- * or if WoL is not enabled and OEM PHY is copper based,
+- * power down the PHY so no link is implied when interface is down */
+- if(!adapter->wol
+- && ((adapter->hw.mac_type >= iegbe_82540
+- && adapter->hw.media_type == iegbe_media_type_copper
+- && !iegbe_check_mng_mode(&adapter->hw)
+- && !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN))
+- || (adapter->hw.media_type == iegbe_media_type_oem
+- && iegbe_oem_phy_is_copper(&adapter->hw)))){
++static void iegbe_power_down_phy(struct iegbe_adapter *adapter)
++{
++ struct iegbe_hw *hw = &adapter->hw;
+
+- uint16_t mii_reg;
+- iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
++ /* Power down the PHY so no link is implied when interface is down *
++ * The PHY cannot be powered down if any of the following is true *
++ * (a) WoL is enabled
++ * (b) AMT is active
++ * (c) SoL/IDER session is active */
++ if (!adapter->wol && hw->mac_type >= iegbe_82540 &&
++ hw->media_type == iegbe_media_type_copper) {
++ u16 mii_reg = 0;
++
++ switch (hw->mac_type) {
++ case iegbe_82540:
++ case iegbe_82545:
++ case iegbe_82545_rev_3:
++ case iegbe_82546:
++ case iegbe_82546_rev_3:
++ case iegbe_82541:
++ case iegbe_82541_rev_2:
++ case iegbe_82547:
++ case iegbe_82547_rev_2:
++ if (E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN)
++ goto out;
++ break;
++ case iegbe_82571:
++ case iegbe_82572:
++ case iegbe_82573:
++ if (iegbe_check_mng_mode(hw) ||
++ iegbe_check_phy_reset_block(hw))
++ goto out;
++ break;
++ default:
++ goto out;
++ }
++ iegbe_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+- iegbe_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
++ iegbe_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ mdelay(1);
+ }
++out:
++ return;
+ }
+
+-void
+-iegbe_reset(struct iegbe_adapter *adapter)
++void iegbe_down(struct iegbe_adapter *adapter)
+ {
+- struct net_device *netdev = adapter->netdev;
+- uint32_t pba, manc;
+- uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
+- uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF;
++ struct net_device *netdev = adapter->netdev;
+
++ /* signal that we're down so the interrupt handler does not
++ * reschedule our watchdog timer */
++ set_bit(__E1000_DOWN, &adapter->flags);
+
+- /* Repartition Pba for greater than 9k mtu
+- * To take effect CTRL.RST is required.
+- */
++ napi_disable(&adapter->napi);
+
+- switch (adapter->hw.mac_type) {
+- case iegbe_82547:
+- case iegbe_82547_rev_2:
+- pba = E1000_PBA_30K;
+- break;
+- case iegbe_82571:
+- case iegbe_82572:
+- pba = E1000_PBA_38K;
+- break;
+- case iegbe_82573:
+- pba = E1000_PBA_12K;
++ iegbe_irq_disable(adapter);
++
++ del_timer_sync(&adapter->tx_fifo_stall_timer);
++ del_timer_sync(&adapter->watchdog_timer);
++ del_timer_sync(&adapter->phy_info_timer);
++
++ netdev->tx_queue_len = adapter->tx_queue_len;
++ adapter->link_speed = 0;
++ adapter->link_duplex = 0;
++ netif_carrier_off(netdev);
++ netif_stop_queue(netdev);
++
++ iegbe_reset(adapter);
++ iegbe_clean_all_tx_rings(adapter);
++ iegbe_clean_all_rx_rings(adapter);
++}
++void iegbe_reinit_locked(struct iegbe_adapter *adapter)
++{
++ WARN_ON(in_interrupt());
++ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
++ msleep(1);
++ iegbe_down(adapter);
++ iegbe_up(adapter);
++ clear_bit(__E1000_RESETTING, &adapter->flags);
++}
++
++void iegbe_reset(struct iegbe_adapter *adapter)
++{
++ struct iegbe_hw *hw = &adapter->hw;
++ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
++ u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
++ bool legacy_pba_adjust = false;
++
++ /* Repartition Pba for greater than 9k mtu
++ * To take effect CTRL.RST is required.
++ */
++
++ switch (hw->mac_type) {
++ case iegbe_82542_rev2_0:
++ case iegbe_82542_rev2_1:
++ case iegbe_82543:
++ case iegbe_82544:
++ case iegbe_82540:
++ case iegbe_82541:
++ case iegbe_82541_rev_2:
++ case iegbe_icp_xxxx:
++ legacy_pba_adjust = true;
++ pba = E1000_PBA_48K;
+ break;
+- default:
++ case iegbe_82545:
++ case iegbe_82545_rev_3:
++ case iegbe_82546:
++ case iegbe_82546_rev_3:
+ pba = E1000_PBA_48K;
+ break;
+- }
++ case iegbe_82547:
++ case iegbe_82573:
++ case iegbe_82547_rev_2:
++ legacy_pba_adjust = true;
++ pba = E1000_PBA_30K;
++ break;
++ case iegbe_82571:
++ case iegbe_82572:
++ case iegbe_undefined:
++ case iegbe_num_macs:
++ break;
++ }
++
++ if (legacy_pba_adjust) {
++ if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
++ pba -= 8; /* allocate more FIFO for Tx */
++ /* send an XOFF when there is enough space in the
++ * Rx FIFO to hold one extra full size Rx packet
++ */
+
+- if((adapter->hw.mac_type != iegbe_82573) &&
+- (adapter->rx_buffer_len > E1000_RXBUFFER_8192)) {
+- pba -= 0x8; /* allocate more FIFO for Tx */
+- /* send an XOFF when there is enough space in the
+- * Rx FIFO to hold one extra full size Rx packet
+- */
+- fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE +
+- ETHERNET_FCS_SIZE + 0x1;
+- fc_low_water_mark = fc_high_water_mark + 0x8;
+- }
+
++ if (hw->mac_type == iegbe_82547) {
++ adapter->tx_fifo_head = 0;
++ adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
++ adapter->tx_fifo_size =
++ (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
++ atomic_set(&adapter->tx_fifo_stall, 0);
++ }
++ } else if (hw->max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
++ E1000_WRITE_REG(&adapter->hw, PBA, pba);
++
++ /* To maintain wire speed transmits, the Tx FIFO should be
++ * large enough to accomodate two full transmit packets,
++ * rounded up to the next 1KB and expressed in KB. Likewise,
++ * the Rx FIFO should be large enough to accomodate at least
++ * one full receive packet and is similarly rounded up and
++ * expressed in KB. */
++ pba = E1000_READ_REG(&adapter->hw, PBA);
++ /* upper 16 bits has Tx packet buffer allocation size in KB */
++ tx_space = pba >> 16;
++ /* lower 16 bits has Rx packet buffer allocation size in KB */
++ pba &= 0xffff;
++ /* don't include ethernet FCS because hardware appends/strips */
++ min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
++ VLAN_TAG_SIZE;
++ min_tx_space = min_rx_space;
++ min_tx_space *= 2;
++ min_tx_space = ALIGN(min_tx_space, 1024);
++ min_tx_space >>= 10;
++ min_rx_space = ALIGN(min_rx_space, 1024);
++ min_rx_space >>= 10;
++
++ /* If current Tx allocation is less than the min Tx FIFO size,
++ * and the min Tx FIFO size is less than the current Rx FIFO
++ * allocation, take space away from current Rx allocation */
++ if (tx_space < min_tx_space &&
++ ((min_tx_space - tx_space) < pba)) {
++ pba = pba - (min_tx_space - tx_space);
++
++ /* PCI/PCIx hardware has PBA alignment constraints */
++ switch (hw->mac_type) {
++ case iegbe_82545 ... iegbe_82546_rev_3:
++ pba &= ~(E1000_PBA_8K - 1);
++ break;
++ default:
++ break;
++ }
+
+- if(adapter->hw.mac_type == iegbe_82547) {
+- adapter->tx_fifo_head = 0;
+- adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
+- adapter->tx_fifo_size =
+- (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
+- atomic_set(&adapter->tx_fifo_stall, 0);
++ /* if short on rx space, rx wins and must trump tx
++ * adjustment or use Early Receive if available */
++ if (pba < min_rx_space) {
++ switch (hw->mac_type) {
++ case iegbe_82573:
++ /* ERT enabled in iegbe_configure_rx */
++ break;
++ default:
++ pba = min_rx_space;
++ break;
++ }
++ }
++ }
+ }
+
+ E1000_WRITE_REG(&adapter->hw, PBA, pba);
+
+ /* flow control settings */
+- adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) -
+- fc_high_water_mark;
+- adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) -
+- fc_low_water_mark;
+- adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
+- adapter->hw.fc_send_xon = 1;
+- adapter->hw.fc = adapter->hw.original_fc;
++ /* Set the FC high water mark to 90% of the FIFO size.
++ * Required to clear last 3 LSB */
++ fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
++ /* We can't use 90% on small FIFOs because the remainder
++ * would be less than 1 full frame. In this case, we size
++ * it to allow at least a full frame above the high water
++ * mark. */
++ if (pba < E1000_PBA_16K)
++ fc_high_water_mark = (pba * 1024) - 1600;
++
++ hw->fc_high_water = fc_high_water_mark;
++ hw->fc_low_water = fc_high_water_mark - 8;
++ hw->fc_pause_time = E1000_FC_PAUSE_TIME;
++ hw->fc_send_xon = 1;
++ hw->fc = hw->original_fc;
+
+ /* Allow time for pending master requests to run */
+- iegbe_reset_hw(&adapter->hw);
+- if(adapter->hw.mac_type >= iegbe_82544){
++ iegbe_reset_hw(hw);
++ if (hw->mac_type >= iegbe_82544)
+ E1000_WRITE_REG(&adapter->hw, WUC, 0);
+- }
+- if(iegbe_init_hw(&adapter->hw)) {
++
++ if (iegbe_init_hw(hw))
+ DPRINTK(PROBE, ERR, "Hardware Error\n");
+- }
+-#ifdef NETIF_F_HW_VLAN_TX
+ iegbe_update_mng_vlan(adapter);
+-#endif
++
++ /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
++ if (hw->mac_type >= iegbe_82544 &&
++ hw->mac_type <= iegbe_82547_rev_2 &&
++ hw->autoneg == 1 &&
++ hw->autoneg_advertised == ADVERTISE_1000_FULL) {
++ u32 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
++ /* clear phy power management bit if we are in gig only mode,
++ * which if enabled will attempt negotiation to 100Mb, which
++ * can cause a loss of link at power off or driver unload */
++ ctrl &= ~E1000_CTRL_SWDPIN3;
++ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
++ }
++
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
+
+- iegbe_reset_adaptive(&adapter->hw);
+- iegbe_phy_get_info(&adapter->hw, &adapter->phy_info);
+- if(adapter->en_mng_pt) {
+- manc = E1000_READ_REG(&adapter->hw, MANC);
+- manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
+- E1000_WRITE_REG(&adapter->hw, MANC, manc);
++ iegbe_reset_adaptive(hw);
++ iegbe_phy_get_info(hw, &adapter->phy_info);
++
++ if (!adapter->smart_power_down &&
++ (hw->mac_type == iegbe_82571 ||
++ hw->mac_type == iegbe_82572)) {
++ u16 phy_data = 0;
++ /* speed up time to link by disabling smart power down, ignore
++ * the return value of this function because there is nothing
++ * different we would do if it failed */
++ iegbe_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
++ &phy_data);
++ phy_data &= ~IGP02E1000_PM_SPD;
++ iegbe_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
++ phy_data);
++ }
++
++}
++
++/**
++ * Dump the eeprom for users having checksum issues
++ **/
++static void iegbe_dump_eeprom(struct iegbe_adapter *adapter)
++{
++ struct net_device *netdev = adapter->netdev;
++ struct ethtool_eeprom eeprom;
++ const struct ethtool_ops *ops = netdev->ethtool_ops;
++ u8 *data;
++ int i;
++ u16 csum_old, csum_new = 0;
++
++ eeprom.len = ops->get_eeprom_len(netdev);
++ eeprom.offset = 0;
++
++ data = kmalloc(eeprom.len, GFP_KERNEL);
++ if (!data) {
++ printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
++ " data\n");
++ return;
+ }
++
++ ops->get_eeprom(netdev, &eeprom, data);
++
++ csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
++ (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
++ for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
++ csum_new += data[i] + (data[i + 1] << 8);
++ csum_new = EEPROM_SUM - csum_new;
++
++ printk(KERN_ERR "/*********************/\n");
++ printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
++ printk(KERN_ERR "Calculated : 0x%04x\n", csum_new);
++
++ printk(KERN_ERR "Offset Values\n");
++ printk(KERN_ERR "======== ======\n");
++ print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
++
++ printk(KERN_ERR "Include this output when contacting your support "
++ "provider.\n");
++ printk(KERN_ERR "This is not a software error! Something bad "
++ "happened to your hardware or\n");
++ printk(KERN_ERR "EEPROM image. Ignoring this "
++ "problem could result in further problems,\n");
++ printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
++ printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
++ "which is invalid\n");
++ printk(KERN_ERR "and requires you to set the proper MAC "
++ "address manually before continuing\n");
++ printk(KERN_ERR "to enable this network device.\n");
++ printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
++ "to your hardware vendor\n");
++ printk(KERN_ERR "or Intel Customer Support.\n");
++ printk(KERN_ERR "/*********************/\n");
++
++ kfree(data);
+ }
+
+ /**
+@@ -721,184 +735,166 @@ iegbe_reset(struct iegbe_adapter *adapte
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+-
+-static int __devinit
+-iegbe_probe(struct pci_dev *pdev,
++static int __devinit iegbe_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+ {
+- struct net_device *netdev;
+- struct iegbe_adapter *adapter;
+- unsigned long mmio_start, mmio_len;
+- uint32_t ctrl_ext;
+- uint32_t swsm;
++ struct net_device *netdev;
++ struct iegbe_adapter *adapter;
++ struct iegbe_hw *hw;
+
+ static int cards_found = 0;
++ int i, err, pci_using_dac;
++ u16 eeprom_data = 0;
++ u16 eeprom_apme_mask = E1000_EEPROM_APME;
++ int bars;
++ DECLARE_MAC_BUF(mac);
+
+- int i, err, pci_using_dac;
+- uint16_t eeprom_data = 0;
+- uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
++ bars = pci_select_bars(pdev, IORESOURCE_MEM);
++ err = pci_enable_device(pdev);
+
++ if (err)
++ return err;
+
+- if((err = pci_enable_device(pdev))) {
+- return err;
+- }
+- if(!(err = pci_set_dma_mask(pdev, PCI_DMA_64BIT))) {
++ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
++ !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
+ pci_using_dac = 1;
+- } else {
+- if((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT))) {
+- E1000_ERR("No usable DMA configuration, aborting\n");
+- return err;
+- }
++ } else {
++ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
++ if (err) {
++ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
++ if (err) {
++ E1000_ERR("No usable DMA configuration, "
++ "aborting\n");
++ goto err_dma;
++ }
++ }
+ pci_using_dac = 0;
+- }
+-
+- if((err = pci_request_regions(pdev, iegbe_driver_name))) {
+- return err;
+ }
+- pci_set_master(pdev);
+
+- netdev = alloc_etherdev(sizeof(struct iegbe_adapter));
+- if(!netdev) {
+- err = -ENOMEM;
+- goto err_alloc_etherdev;
+- }
++ err = pci_request_selected_regions(pdev, bars, iegbe_driver_name);
++ if (err)
++ goto err_pci_reg;
++
++ pci_set_master(pdev);
++
++ err = -ENOMEM;
++ netdev = alloc_etherdev(sizeof(struct iegbe_adapter));
++ if (!netdev)
++ goto err_alloc_etherdev;
+
+- SET_MODULE_OWNER(netdev);
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+- pci_set_drvdata(pdev, netdev);
+- adapter = netdev_priv(netdev);
+- adapter->netdev = netdev;
+- adapter->pdev = pdev;
+- adapter->hw.back = adapter;
+- adapter->msg_enable = (0x1 << debug) - 0x1;
+-
+- mmio_start = pci_resource_start(pdev, BAR_0);
+- mmio_len = pci_resource_len(pdev, BAR_0);
+-
+- adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
+- if(!adapter->hw.hw_addr) {
+- err = -EIO;
+- goto err_ioremap;
+- }
+-
+- for(i = BAR_1; i <= BAR_5; i++) {
+- if(pci_resource_len(pdev, i) == 0) {
+- continue;
+- }
+- if(pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+- adapter->hw.io_base = pci_resource_start(pdev, i);
+- break;
+- }
+- }
+-
+- netdev->open = &iegbe_open;
+- netdev->stop = &iegbe_close;
+- netdev->hard_start_xmit = &iegbe_xmit_frame;
+- netdev->get_stats = &iegbe_get_stats;
+- netdev->set_multicast_list = &iegbe_set_multi;
++ pci_set_drvdata(pdev, netdev);
++ adapter = netdev_priv(netdev);
++ adapter->netdev = netdev;
++ adapter->pdev = pdev;
++ adapter->msg_enable = (1 << debug) - 1;
++ adapter->bars = bars;
++
++ hw = &adapter->hw;
++ hw->back = adapter;
++
++ err = -EIO;
++ hw->hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
++ pci_resource_len(pdev, BAR_0));
++ if (!hw->hw_addr)
++ goto err_ioremap;
++
++ netdev->open = &iegbe_open;
++ netdev->stop = &iegbe_close;
++ netdev->hard_start_xmit = &iegbe_xmit_frame;
++ netdev->get_stats = &iegbe_get_stats;
++ netdev->set_rx_mode = &iegbe_set_rx_mode;
+ netdev->set_mac_address = &iegbe_set_mac;
+- netdev->change_mtu = &iegbe_change_mtu;
+- netdev->do_ioctl = &iegbe_ioctl;
++ netdev->change_mtu = &iegbe_change_mtu;
++ netdev->do_ioctl = &iegbe_ioctl;
+ set_ethtool_ops(netdev);
+-#ifdef HAVE_TX_TIMEOUT
+- netdev->tx_timeout = &iegbe_tx_timeout;
+- netdev->watchdog_timeo = 0x5 * HZ;
+-#endif
+-#ifdef CONFIG_E1000_NAPI
+- netdev->poll = &iegbe_clean;
+- netdev->weight = 0x40;
+-#endif
+-#ifdef NETIF_F_HW_VLAN_TX
+- netdev->vlan_rx_register = iegbe_vlan_rx_register;
+- netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
+- netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
+-#endif
++ netdev->tx_timeout = &iegbe_tx_timeout;
++ netdev->watchdog_timeo = 5 * HZ;
++ netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
++ netdev->vlan_rx_register = iegbe_vlan_rx_register;
++ netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
++ netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
+ #ifdef CONFIG_NET_POLL_CONTROLLER
+- netdev->poll_controller = iegbe_netpoll;
++ netdev->poll_controller = iegbe_netpoll;
+ #endif
+- strcpy(netdev->name, pci_name(pdev));
++ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+- netdev->mem_start = mmio_start;
+- netdev->mem_end = mmio_start + mmio_len;
+- netdev->base_addr = adapter->hw.io_base;
+
+- adapter->bd_number = cards_found;
++ adapter->bd_number = cards_found;
+
+- /* setup the private structure */
++ /* setup the private structure */
+
+- if((err = iegbe_sw_init(adapter))) {
+- goto err_sw_init;
+- }
+- if((err = iegbe_check_phy_reset_block(&adapter->hw))) {
+- DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
+- }
+-#ifdef MAX_SKB_FRAGS
+- if(adapter->hw.mac_type >= iegbe_82543) {
+-#ifdef NETIF_F_HW_VLAN_TX
+- netdev->features = NETIF_F_SG |
+- NETIF_F_HW_CSUM |
+- NETIF_F_HW_VLAN_TX |
+- NETIF_F_HW_VLAN_RX |
+- NETIF_F_HW_VLAN_FILTER;
+-#else
+- netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM;
+-#endif
+- }
++ err = iegbe_sw_init(adapter);
++ if (err)
++ goto err_sw_init;
++ err = -EIO;
++ if (iegbe_check_phy_reset_block(hw))
++ DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
+
+-#ifdef NETIF_F_TSO
+- if((adapter->hw.mac_type >= iegbe_82544) &&
+- (adapter->hw.mac_type != iegbe_82547)) {
+- netdev->features |= NETIF_F_TSO;
+- }
+-#ifdef NETIF_F_TSO_IPV6
+- if(adapter->hw.mac_type > iegbe_82547_rev_2) {
+- netdev->features |= NETIF_F_TSO_IPV6;
+- }
+-#endif
+-#endif
+- if(pci_using_dac) {
+- netdev->features |= NETIF_F_HIGHDMA;
++ if (hw->mac_type >= iegbe_82543) {
++ netdev->features = NETIF_F_SG |
++ NETIF_F_HW_CSUM |
++ NETIF_F_HW_VLAN_TX |
++ NETIF_F_HW_VLAN_RX |
++ NETIF_F_HW_VLAN_FILTER;
+ }
+-#endif
+-#ifdef NETIF_F_LLTX
+- netdev->features |= NETIF_F_LLTX;
+-#endif
+
+- adapter->en_mng_pt = iegbe_enable_mng_pass_thru(&adapter->hw);
++ if ((hw->mac_type >= iegbe_82544) &&
++ (hw->mac_type != iegbe_82547))
++ netdev->features |= NETIF_F_TSO;
+
+- /* before reading the EEPROM, reset the controller to
+- * put the device in a known good starting state */
++ if (hw->mac_type > iegbe_82547_rev_2)
++ netdev->features |= NETIF_F_TSO6;
++ if (pci_using_dac)
++ netdev->features |= NETIF_F_HIGHDMA;
++
++ netdev->features |= NETIF_F_LLTX;
+
+- iegbe_reset_hw(&adapter->hw);
++ adapter->en_mng_pt = iegbe_enable_mng_pass_thru(hw);
+
+- /* make sure the EEPROM is good */
+- if(iegbe_validate_eeprom_checksum(&adapter->hw) < 0) {
+- DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
+- err = -EIO;
++ /* initialize eeprom parameters */
++
++ if (iegbe_init_eeprom_params(hw)) {
++ E1000_ERR("EEPROM initialization failed\n");
+ goto err_eeprom;
+ }
+
+- /* copy the MAC address out of the EEPROM */
++ /* before reading the EEPROM, reset the controller to
++ * put the device in a known good starting state */
+
+- if(iegbe_read_mac_addr(&adapter->hw)) {
+- DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
+- }
+- memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
++ iegbe_reset_hw(hw);
+
+- if(!is_valid_ether_addr(netdev->dev_addr)) {
+- DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+- err = -EIO;
+- goto err_eeprom;
+- }
++ /* make sure the EEPROM is good */
++ if (iegbe_validate_eeprom_checksum(hw) < 0) {
++ DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
++ iegbe_dump_eeprom(adapter);
++ /*
++ * set MAC address to all zeroes to invalidate and temporary
++ * disable this device for the user. This blocks regular
++ * traffic while still permitting ethtool ioctls from reaching
++ * the hardware as well as allowing the user to run the
++ * interface after manually setting a hw addr using
++ * `ip set address`
++ */
++ memset(hw->mac_addr, 0, netdev->addr_len);
++ } else {
++ /* copy the MAC address out of the EEPROM */
++ if (iegbe_read_mac_addr(hw))
++ DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
++ }
++ /* don't block initalization here due to bad MAC address */
++ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
++ memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
+
+- iegbe_read_part_num(&adapter->hw, &(adapter->part_num));
++ if (!is_valid_ether_addr(netdev->perm_addr))
++ DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+
+- iegbe_get_bus_info(&adapter->hw);
++ iegbe_get_bus_info(hw);
+
+ init_timer(&adapter->tx_fifo_stall_timer);
+ adapter->tx_fifo_stall_timer.function = &iegbe_82547_tx_fifo_stall;
+- adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
++ adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = &iegbe_watchdog;
+@@ -906,75 +902,50 @@ iegbe_probe(struct pci_dev *pdev,
+
+ init_timer(&adapter->phy_info_timer);
+ adapter->phy_info_timer.function = &iegbe_update_phy_info;
+- adapter->phy_info_timer.data = (unsigned long) adapter;
+-
+- INIT_WORK(&adapter->tx_timeout_task,
+- (void (*)(void *))iegbe_tx_timeout_task, netdev);
++ adapter->phy_info_timer.data = (unsigned long)adapter;
+
+- /* we're going to reset, so assume we have no link for now */
+-
+- netif_carrier_off(netdev);
+- netif_stop_queue(netdev);
++ INIT_WORK(&adapter->reset_task, iegbe_reset_task);
+
+- iegbe_check_options(adapter);
++ iegbe_check_options(adapter);
+
+- /* Initial Wake on LAN setting
+- * If APM wake is enabled in the EEPROM,
+- * enable the ACPI Magic Packet filter
+- */
++ /* Initial Wake on LAN setting
++ * If APM wake is enabled in the EEPROM,
++ * enable the ACPI Magic Packet filter
++ */
+
+- switch(adapter->hw.mac_type) {
+- case iegbe_82542_rev2_0:
+- case iegbe_82542_rev2_1:
+- case iegbe_82543:
+- break;
+- case iegbe_82544:
+- iegbe_read_eeprom(&adapter->hw,
+- EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
+- eeprom_apme_mask = E1000_EEPROM_82544_APM;
+- break;
++ switch(adapter->hw.mac_type) {
++ case iegbe_82542_rev2_0:
++ case iegbe_82542_rev2_1:
++ case iegbe_82543:
++ break;
++ case iegbe_82544:
++ iegbe_read_eeprom(&adapter->hw,
++ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
++ eeprom_apme_mask = E1000_EEPROM_82544_APM;
++ break;
+ case iegbe_icp_xxxx:
+- iegbe_read_eeprom(&adapter->hw,
+- EEPROM_INIT_CONTROL3_ICP_xxxx(adapter->bd_number),
+- 1, &eeprom_data);
+- eeprom_apme_mask = EEPROM_CTRL3_APME_ICP_xxxx;
+- break;
+- case iegbe_82546:
+- case iegbe_82546_rev_3:
+- if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
+- && (adapter->hw.media_type == iegbe_media_type_copper)) {
+- iegbe_read_eeprom(&adapter->hw,
+- EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+- break;
+- }
+- /* Fall Through */
+- default:
+- iegbe_read_eeprom(&adapter->hw,
+- EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+- break;
+- }
++ iegbe_read_eeprom(&adapter->hw,
++ EEPROM_INIT_CONTROL3_ICP_xxxx(adapter->bd_number),
++ 1, &eeprom_data);
++ eeprom_apme_mask = EEPROM_CTRL3_APME_ICP_xxxx;
++ break;
++ case iegbe_82546:
++ case iegbe_82546_rev_3:
++ if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
++ && (adapter->hw.media_type == iegbe_media_type_copper)) {
++ iegbe_read_eeprom(&adapter->hw,
++ EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
++ break;
++ }
++ /* Fall Through */
++ default:
++ iegbe_read_eeprom(&adapter->hw,
++ EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
++ break;
++ }
+ if(eeprom_data & eeprom_apme_mask) {
+- adapter->wol |= E1000_WUFC_MAG;
++ adapter->wol |= E1000_WUFC_MAG;
+ }
+- /* reset the hardware with the new settings */
+- iegbe_reset(adapter);
+-
+- /* Let firmware know the driver has taken over */
+- switch(adapter->hw.mac_type) {
+- case iegbe_82571:
+- case iegbe_82572:
+- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+- ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+- break;
+- case iegbe_82573:
+- swsm = E1000_READ_REG(&adapter->hw, SWSM);
+- E1000_WRITE_REG(&adapter->hw, SWSM,
+- swsm | E1000_SWSM_DRV_LOAD);
+- break;
+- default:
+- break;
+- }
+
+ /* The ICP_xxxx device has multiple, duplicate interrupt
+ * registers, so disable all but the first one
+@@ -987,24 +958,40 @@ iegbe_probe(struct pci_dev *pdev,
+ E1000_WRITE_REG(&adapter->hw, IMC2, ~0UL);
+ }
+
+- strcpy(netdev->name, "eth%d");
+- if((err = register_netdev(netdev))) {
+- goto err_register;
+- }
++ iegbe_reset(adapter);
++ netif_carrier_off(netdev);
++ netif_stop_queue(netdev);
++ strcpy(netdev->name, "eth%d");
++ err = register_netdev(netdev);
++ if (err)
++ goto err_register;
++
+ DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
+
+- cards_found++;
+- return 0;
++ cards_found++;
++ return 0;
+
+ err_register:
+-err_sw_init:
+ err_eeprom:
+- iounmap(adapter->hw.hw_addr);
++ if (!iegbe_check_phy_reset_block(hw))
++ iegbe_phy_hw_reset(hw);
++ if (hw->flash_address)
++ iounmap(hw->flash_address);
++ for (i = 0; i < adapter->num_rx_queues; i++)
++ dev_put(&adapter->polling_netdev[i]);
++ kfree(adapter->tx_ring);
++ kfree(adapter->rx_ring);
++ kfree(adapter->polling_netdev);
++err_sw_init:
++ iounmap(hw->hw_addr);
+ err_ioremap:
+- free_netdev(netdev);
++ free_netdev(netdev);
+ err_alloc_etherdev:
+- pci_release_regions(pdev);
+- return err;
++ pci_release_selected_regions(pdev, bars);
++err_pci_reg:
++err_dma:
++ pci_disable_device(pdev);
++ return err;
+ }
+
+ /**
+@@ -1020,64 +1007,36 @@ err_alloc_etherdev:
+ static void __devexit
+ iegbe_remove(struct pci_dev *pdev)
+ {
+- struct net_device *netdev = pci_get_drvdata(pdev);
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- uint32_t ctrl_ext;
+- uint32_t manc, swsm;
+-#ifdef CONFIG_E1000_NAPI
+- int i;
+-#endif
+-
+- if(adapter->hw.mac_type >= iegbe_82540
+- && adapter->hw.mac_type != iegbe_icp_xxxx
+- && adapter->hw.media_type == iegbe_media_type_copper) {
+- manc = E1000_READ_REG(&adapter->hw, MANC);
+- if(manc & E1000_MANC_SMBUS_EN) {
+- manc |= E1000_MANC_ARP_EN;
+- E1000_WRITE_REG(&adapter->hw, MANC, manc);
+- }
+- }
+-
+- switch(adapter->hw.mac_type) {
+- case iegbe_82571:
+- case iegbe_82572:
+- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+- ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+- break;
+- case iegbe_82573:
+- swsm = E1000_READ_REG(&adapter->hw, SWSM);
+- E1000_WRITE_REG(&adapter->hw, SWSM,
+- swsm & ~E1000_SWSM_DRV_LOAD);
+- break;
+-
+- default:
+- break;
+- }
++ struct net_device *netdev = pci_get_drvdata(pdev);
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ uint32_t manc;
++ int i;
++
++ if(adapter->hw.mac_type >= iegbe_82540
++ && adapter->hw.mac_type != iegbe_icp_xxxx
++ && adapter->hw.media_type == iegbe_media_type_copper) {
++ manc = E1000_READ_REG(&adapter->hw, MANC);
++ if(manc & E1000_MANC_SMBUS_EN) {
++ manc |= E1000_MANC_ARP_EN;
++ E1000_WRITE_REG(&adapter->hw, MANC, manc);
++ }
++ }
+
+- unregister_netdev(netdev);
+-#ifdef CONFIG_E1000_NAPI
+- for (i = 0; i < adapter->num_queues; i++)
++ unregister_netdev(netdev);
++ for (i = 0x0; i < adapter->num_rx_queues; i++)
+ dev_put(&adapter->polling_netdev[i]);
+-#endif
+
+ if(!iegbe_check_phy_reset_block(&adapter->hw)) {
+- iegbe_phy_hw_reset(&adapter->hw);
++ iegbe_phy_hw_reset(&adapter->hw);
+ }
+- kfree(adapter->tx_ring);
+- kfree(adapter->rx_ring);
+-#ifdef CONFIG_E1000_NAPI
+- kfree(adapter->polling_netdev);
+-#endif
++ kfree(adapter->tx_ring);
++ kfree(adapter->rx_ring);
++ kfree(adapter->polling_netdev);
+
+- iounmap(adapter->hw.hw_addr);
+- pci_release_regions(pdev);
++ iounmap(adapter->hw.hw_addr);
++ pci_release_regions(pdev);
+
+-#ifdef CONFIG_E1000_MQ
+- free_percpu(adapter->cpu_netdev);
+- free_percpu(adapter->cpu_tx_ring);
+-#endif
+- free_netdev(netdev);
++ free_netdev(netdev);
+ }
+
+ /**
+@@ -1092,118 +1051,78 @@ iegbe_remove(struct pci_dev *pdev)
+ static int __devinit
+ iegbe_sw_init(struct iegbe_adapter *adapter)
+ {
+- struct iegbe_hw *hw = &adapter->hw;
+- struct net_device *netdev = adapter->netdev;
+- struct pci_dev *pdev = adapter->pdev;
+-#ifdef CONFIG_E1000_NAPI
+- int i;
+-#endif
++ struct iegbe_hw *hw = &adapter->hw;
++ struct net_device *netdev = adapter->netdev;
++ struct pci_dev *pdev = adapter->pdev;
++ int i;
+
+- /* PCI config space info */
++ /* PCI config space info */
+
+- hw->vendor_id = pdev->vendor;
+- hw->device_id = pdev->device;
+- hw->subsystem_vendor_id = pdev->subsystem_vendor;
+- hw->subsystem_id = pdev->subsystem_device;
++ hw->vendor_id = pdev->vendor;
++ hw->device_id = pdev->device;
++ hw->subsystem_vendor_id = pdev->subsystem_vendor;
++ hw->subsystem_id = pdev->subsystem_device;
+
+- pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
++ pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+
+- pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
++ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+- adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+- adapter->rx_ps_bsize0 = E1000_RXBUFFER_256;
+- hw->max_frame_size = netdev->mtu +
+- ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+- hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
++ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
++ adapter->rx_ps_bsize0 = E1000_RXBUFFER_256;
++ hw->max_frame_size = netdev->mtu +
++ ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
++ hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+
+- /* identify the MAC */
++ /* identify the MAC */
+
+- if(iegbe_set_mac_type(hw)) {
++ if (iegbe_set_mac_type(hw)) {
+ DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
+ return -EIO;
+ }
+
+- /* initialize eeprom parameters */
+-
+- if(iegbe_init_eeprom_params(hw)) {
+- E1000_ERR("EEPROM initialization failed\n");
+- return -EIO;
+- }
+-
+- switch(hw->mac_type) {
+- default:
+- break;
+- case iegbe_82541:
+- case iegbe_82547:
+- case iegbe_82541_rev_2:
+- case iegbe_82547_rev_2:
+- hw->phy_init_script = 0x1;
+- break;
+- }
+-
+- iegbe_set_media_type(hw);
++ iegbe_set_media_type(hw);
+
+- hw->wait_autoneg_complete = FALSE;
+- hw->tbi_compatibility_en = TRUE;
+- hw->adaptive_ifs = TRUE;
++ hw->wait_autoneg_complete = FALSE;
++ hw->tbi_compatibility_en = TRUE;
++ hw->adaptive_ifs = TRUE;
+
+- /* Copper options */
++ /* Copper options */
+
+- if(hw->media_type == iegbe_media_type_copper
++ if(hw->media_type == iegbe_media_type_copper
+ || (hw->media_type == iegbe_media_type_oem
+ && iegbe_oem_phy_is_copper(&adapter->hw))) {
+- hw->mdix = AUTO_ALL_MODES;
+- hw->disable_polarity_correction = FALSE;
+- hw->master_slave = E1000_MASTER_SLAVE;
+- }
++ hw->mdix = AUTO_ALL_MODES;
++ hw->disable_polarity_correction = FALSE;
++ hw->master_slave = E1000_MASTER_SLAVE;
++ }
+
+-#ifdef CONFIG_E1000_MQ
+- /* Number of supported queues */
+- switch (hw->mac_type) {
+- case iegbe_82571:
+- case iegbe_82572:
+- adapter->num_queues = 0x2;
+- break;
+- default:
+- adapter->num_queues = 0x1;
+- break;
+- }
+- adapter->num_queues = min(adapter->num_queues, num_online_cpus());
+-#else
+- adapter->num_queues = 0x1;
+-#endif
++ adapter->num_tx_queues = 0x1;
++ adapter->num_rx_queues = 0x1;
+
+ if (iegbe_alloc_queues(adapter)) {
+ DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+-#ifdef CONFIG_E1000_NAPI
+- for (i = 0; i < adapter->num_queues; i++) {
++ for (i = 0; i < adapter->num_rx_queues; i++) {
+ adapter->polling_netdev[i].priv = adapter;
+- adapter->polling_netdev[i].poll = &iegbe_clean;
+- adapter->polling_netdev[i].weight = 0x40;
+ dev_hold(&adapter->polling_netdev[i]);
+ set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
+ }
+-#endif
+-
+-#ifdef CONFIG_E1000_MQ
+- iegbe_setup_queue_mapping(adapter);
+-#endif
++ spin_lock_init(&adapter->tx_queue_lock);
+
+ /*
+- * for ICP_XXXX style controllers, it is necessary to keep
+- * track of the last known state of the link to determine if
+- * the link experienced a change in state when iegbe_watchdog
+- * fires
+- */
+- adapter->hw.icp_xxxx_is_link_up = FALSE;
++ * for ICP_XXXX style controllers, it is necessary to keep
++ * track of the last known state of the link to determine if
++ * the link experienced a change in state when iegbe_watchdog
++ * fires
++ */
++ adapter->hw.icp_xxxx_is_link_up = FALSE;
+
+- atomic_set(&adapter->irq_sem, 1);
+- spin_lock_init(&adapter->stats_lock);
++ spin_lock_init(&adapter->stats_lock);
+
+- return 0;
++ set_bit(__E1000_DOWN, &adapter->flags);
++ return 0x0;
+ }
+
+ /**
+@@ -1218,71 +1137,31 @@ iegbe_sw_init(struct iegbe_adapter *adap
+ static int __devinit
+ iegbe_alloc_queues(struct iegbe_adapter *adapter)
+ {
+- int size;
+
+- size = sizeof(struct iegbe_tx_ring) * adapter->num_queues;
+- adapter->tx_ring = kmalloc(size, GFP_KERNEL);
+- if (!adapter->tx_ring){
++
++ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
++ sizeof(struct iegbe_tx_ring), GFP_KERNEL);
++ if (!adapter->tx_ring)
+ return -ENOMEM;
+- }
+- memset(adapter->tx_ring, 0, size);
+
+- size = sizeof(struct iegbe_rx_ring) * adapter->num_queues;
+- adapter->rx_ring = kmalloc(size, GFP_KERNEL);
++ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
++ sizeof(struct iegbe_rx_ring), GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+- memset(adapter->rx_ring, 0, size);
+
+-#ifdef CONFIG_E1000_NAPI
+- size = sizeof(struct net_device) * adapter->num_queues;
+- adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
++ adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
++ sizeof(struct net_device),
++ GFP_KERNEL);
+ if (!adapter->polling_netdev) {
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+ return -ENOMEM;
+ }
+- memset(adapter->polling_netdev, 0, size);
+-#endif
+-
+- return E1000_SUCCESS;
+-}
+
+-#ifdef CONFIG_E1000_MQ
+-static void __devinit
+-iegbe_setup_queue_mapping(struct iegbe_adapter *adapter)
+-{
+- int i, cpu;
+-
+- adapter->rx_sched_call_data.func = iegbe_rx_schedule;
+- adapter->rx_sched_call_data.info = adapter->netdev;
+- cpus_clear(adapter->rx_sched_call_data.cpumask);
+-
+- adapter->cpu_netdev = alloc_percpu(struct net_device *);
+- adapter->cpu_tx_ring = alloc_percpu(struct iegbe_tx_ring *);
+-
+- lock_cpu_hotplug();
+- i = 0;
+- for_each_online_cpu(cpu) {
+- *per_cpu_ptr(adapter->cpu_tx_ring, cpu) =
+- &adapter->tx_ring[i % adapter->num_queues];
+- /* This is incomplete because we'd like to assign separate
+- * physical cpus to these netdev polling structures and
+- * avoid saturating a subset of cpus.
+- */
+- if (i < adapter->num_queues) {
+- *per_cpu_ptr(adapter->cpu_netdev, cpu) =
+- &adapter->polling_netdev[i];
+- adapter->cpu_for_queue[i] = cpu;
+- } else {
+- *per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL;
+- }
+- i++;
+- }
+- unlock_cpu_hotplug();
++ return E1000_SUCCESS;
+ }
+-#endif
+
+ /**
+ * iegbe_open - Called when a network interface is made active
+@@ -1300,40 +1179,62 @@ iegbe_setup_queue_mapping(struct iegbe_a
+ static int
+ iegbe_open(struct net_device *netdev)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- int err;
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_hw *hw = &adapter->hw;
++ int err;
++
+
++ /* allocate receive descriptors */
++ if (test_bit(__E1000_TESTING, &adapter->flags))
++ return -EBUSY;
+
+- /* allocate receive descriptors */
++ /* allocate transmit descriptors */
++ err = iegbe_setup_all_tx_resources(adapter);
++ if (err)
++ goto err_setup_tx;
+
+- if ((err = iegbe_setup_all_rx_resources(adapter))) {
++ err = iegbe_setup_all_rx_resources(adapter);
++ if (err)
+ goto err_setup_rx;
+- }
+- /* allocate transmit descriptors */
+- if ((err = iegbe_setup_all_tx_resources(adapter))) {
+- goto err_setup_tx;
+- }
+- if ((err = iegbe_up(adapter))) {
+- goto err_up;
+- }
+-#ifdef NETIF_F_HW_VLAN_TX
+- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+- if ((adapter->hw.mng_cookie.status &
+- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+- iegbe_update_mng_vlan(adapter);
+- }
+-#endif
+
+- return E1000_SUCCESS;
++ iegbe_power_up_phy(adapter);
++ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
++ if ((hw->mng_cookie.status &
++ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
++ iegbe_update_mng_vlan(adapter);
++ }
++
++ /* before we allocate an interrupt, we must be ready to handle it.
++ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
++ * as soon as we call pci_request_irq, so we have to setup our
++ * clean_rx handler before we do so. */
++ iegbe_configure(adapter);
++ err = iegbe_request_irq(adapter);
++ if (err)
++ goto err_req_irq;
+
+-err_up:
+- iegbe_free_all_tx_resources(adapter);
+-err_setup_tx:
+- iegbe_free_all_rx_resources(adapter);
++ /* From here on the code is the same as iegbe_up() */
++ clear_bit(__E1000_DOWN, &adapter->flags);
++
++ napi_enable(&adapter->napi);
++
++ iegbe_irq_enable(adapter);
++
++ netif_start_queue(netdev);
++
++ /* fire a link status change interrupt to start the watchdog */
++
++ return E1000_SUCCESS;
++
++err_req_irq:
++ iegbe_power_down_phy(adapter);
++ iegbe_free_all_rx_resources(adapter);
+ err_setup_rx:
+- iegbe_reset(adapter);
++ iegbe_free_all_tx_resources(adapter);
++err_setup_tx:
++ iegbe_reset(adapter);
+
+- return err;
++ return err;
+ }
+
+ /**
+@@ -1348,22 +1249,25 @@ err_setup_rx:
+ * hardware, and all transmit and receive resources are freed.
+ **/
+
+-static int
+-iegbe_close(struct net_device *netdev)
++static int iegbe_close(struct net_device *netdev)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+-
+- iegbe_down(adapter);
+-
+- iegbe_free_all_tx_resources(adapter);
+- iegbe_free_all_rx_resources(adapter);
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_hw *hw = &adapter->hw;
+
+-#ifdef NETIF_F_HW_VLAN_TX
+- if((adapter->hw.mng_cookie.status &
+- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
++ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
++ iegbe_down(adapter);
++ iegbe_power_down_phy(adapter);
++ iegbe_free_irq(adapter);
++
++ iegbe_free_all_tx_resources(adapter);
++ iegbe_free_all_rx_resources(adapter);
++
++ if ((hw->mng_cookie.status &
++ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
++ !(adapter->vlgrp &&
++ vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
+ iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ }
+-#endif
+ return 0;
+ }
+
+@@ -1375,19 +1279,19 @@ iegbe_close(struct net_device *netdev)
+ **/
+ static inline boolean_t
+ iegbe_check_64k_bound(struct iegbe_adapter *adapter,
+- void *start, unsigned long len)
++ void *start, unsigned long len)
+ {
+- unsigned long begin = (unsigned long) start;
+- unsigned long end = begin + len;
++ unsigned long begin = (unsigned long) start;
++ unsigned long end = begin + len;
+
+- /* First rev 82545 and 82546 need to not allow any memory
+- * write location to cross 64k boundary due to errata 23 */
+- if(adapter->hw.mac_type == iegbe_82545 ||
+- adapter->hw.mac_type == iegbe_82546) {
+- return ((begin ^ (end - 1)) >> 0x10) != 0 ? FALSE : TRUE;
+- }
++ /* First rev 82545 and 82546 need to not allow any memory
++ * write location to cross 64k boundary due to errata 23 */
++ if(adapter->hw.mac_type == iegbe_82545 ||
++ adapter->hw.mac_type == iegbe_82546) {
++ return ((begin ^ (end - 1)) >> 0x10) != 0x0 ? FALSE : TRUE;
++ }
+
+- return TRUE;
++ return TRUE;
+ }
+
+ /**
+@@ -1398,102 +1302,98 @@ iegbe_check_64k_bound(struct iegbe_adapt
+ * Return 0 on success, negative on failure
+ **/
+
+-int
+-iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
++static int iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
+ struct iegbe_tx_ring *txdr)
+ {
+- struct pci_dev *pdev = adapter->pdev;
+- int size;
++ struct pci_dev *pdev = adapter->pdev;
++ int size;
+
+- size = sizeof(struct iegbe_buffer) * txdr->count;
+- txdr->buffer_info = vmalloc(size);
+- if (!txdr->buffer_info) {
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate memory for the transmit descriptor ring\n");
+- return -ENOMEM;
+- }
++ size = sizeof(struct iegbe_buffer) * txdr->count;
++ txdr->buffer_info = vmalloc(size);
++ if (!txdr->buffer_info) {
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate memory for the transmit descriptor ring\n");
++ return -ENOMEM;
++ }
+ memset(txdr->buffer_info, 0, size);
+- memset(&txdr->previous_buffer_info, 0, sizeof(struct iegbe_buffer));
+
+- /* round up to nearest 4K */
++ /* round up to nearest 4K */
+
+- txdr->size = txdr->count * sizeof(struct iegbe_tx_desc);
+- E1000_ROUNDUP(txdr->size, 0x1000);
++ txdr->size = txdr->count * sizeof(struct iegbe_tx_desc);
++ txdr->size = ALIGN(txdr->size, 4096);
+
+- txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+- if (!txdr->desc) {
++ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
++ if (!txdr->desc) {
+ setup_tx_desc_die:
+- vfree(txdr->buffer_info);
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate memory for the transmit descriptor ring\n");
+- return -ENOMEM;
+- }
+-
+- /* Fix for errata 23, can't cross 64kB boundary */
+- if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+- void *olddesc = txdr->desc;
+- dma_addr_t olddma = txdr->dma;
+- DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
+- "at %p\n", txdr->size, txdr->desc);
+- /* Try again, without freeing the previous */
+- txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+- /* Failed allocation, critical failure */
+- if (!txdr->desc) {
+- pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+- goto setup_tx_desc_die;
+- }
++ vfree(txdr->buffer_info);
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate memory for the transmit descriptor ring\n");
++ return -ENOMEM;
++ }
++
++ /* Fix for errata 23, can't cross 64kB boundary */
++ if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
++ void *olddesc = txdr->desc;
++ dma_addr_t olddma = txdr->dma;
++ DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
++ "at %p\n", txdr->size, txdr->desc);
++ /* Try again, without freeing the previous */
++ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
++ /* Failed allocation, critical failure */
++ if (!txdr->desc) {
++ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
++ goto setup_tx_desc_die;
++ }
+
+- if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+- /* give up */
+- pci_free_consistent(pdev, txdr->size, txdr->desc,
+- txdr->dma);
+- pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate aligned memory "
+- "for the transmit descriptor ring\n");
+- vfree(txdr->buffer_info);
+- return -ENOMEM;
+- } else {
+- /* Free old allocation, new allocation was successful */
+- pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+- }
+- }
++ if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
++ /* give up */
++ pci_free_consistent(pdev, txdr->size, txdr->desc,
++ txdr->dma);
++ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate aligned memory "
++ "for the transmit descriptor ring\n");
++ vfree(txdr->buffer_info);
++ return -ENOMEM;
++ } else {
++ /* Free old allocation, new allocation was successful */
++ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
++ }
++ }
+ memset(txdr->desc, 0, txdr->size);
+
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
+- spin_lock_init(&txdr->tx_lock);
++ spin_lock_init(&txdr->tx_lock);
+
+ return 0;
+ }
+
+ /**
+ * iegbe_setup_all_tx_resources - wrapper to allocate Tx resources
+- * (Descriptors) for all queues
++ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+- * If this function returns with an error, then it's possible one or
+- * more of the rings is populated (while the rest are not). It is the
+- * callers duty to clean those orphaned rings.
+- *
+ * Return 0 on success, negative on failure
+ **/
+
+-int
+-iegbe_setup_all_tx_resources(struct iegbe_adapter *adapter)
++int iegbe_setup_all_tx_resources(struct iegbe_adapter *adapter)
+ {
+ int i, err = 0;
+
+- for (i = 0; i < adapter->num_queues; i++) {
++ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = iegbe_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Tx Queue %u failed\n", i);
++ for (i-- ; i >= 0; i--)
++ iegbe_free_tx_resources(adapter,
++ &adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+- return err;
++ return err;
+ }
+
+ /**
+@@ -1512,113 +1412,108 @@ iegbe_configure_tx(struct iegbe_adapter
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+
+- switch (adapter->num_queues) {
++ switch (adapter->num_tx_queues) {
+ case 0x2:
+ tdba = adapter->tx_ring[0x1].dma;
+ tdlen = adapter->tx_ring[0x1].count *
+- sizeof(struct iegbe_tx_desc);
+- E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
++ sizeof(struct iegbe_tx_desc);
++ E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, TDBAH1, (tdba >> 0x20));
+- E1000_WRITE_REG(hw, TDLEN1, tdlen);
+- E1000_WRITE_REG(hw, TDH1, 0);
+- E1000_WRITE_REG(hw, TDT1, 0);
++ E1000_WRITE_REG(hw, TDLEN1, tdlen);
++ E1000_WRITE_REG(hw, TDH1, 0x0);
++ E1000_WRITE_REG(hw, TDT1, 0x0);
+ adapter->tx_ring[0x1].tdh = E1000_TDH1;
+ adapter->tx_ring[0x1].tdt = E1000_TDT1;
+- /* Fall Through */
++ /* Fall Through */
+ case 0x1:
+- default:
+- tdba = adapter->tx_ring[0].dma;
+- tdlen = adapter->tx_ring[0].count *
+- sizeof(struct iegbe_tx_desc);
+- E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
++ default:
++ tdba = adapter->tx_ring[0x0].dma;
++ tdlen = adapter->tx_ring[0x0].count *
++ sizeof(struct iegbe_tx_desc);
++ E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, TDBAH, (tdba >> 0x20));
+- E1000_WRITE_REG(hw, TDLEN, tdlen);
+- E1000_WRITE_REG(hw, TDH, 0);
+- E1000_WRITE_REG(hw, TDT, 0);
+- adapter->tx_ring[0].tdh = E1000_TDH;
+- adapter->tx_ring[0].tdt = E1000_TDT;
+- break;
+- }
+-
+- /* Set the default values for the Tx Inter Packet Gap timer */
+-
+- switch (hw->mac_type) {
+- case iegbe_82542_rev2_0:
+- case iegbe_82542_rev2_1:
+- tipg = DEFAULT_82542_TIPG_IPGT;
+- tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
+- tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
+- break;
+- default:
+- switch(hw->media_type) {
+- case iegbe_media_type_fiber:
+- case iegbe_media_type_internal_serdes:
+- tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+- break;
+- case iegbe_media_type_copper:
+- tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+- break;
+- case iegbe_media_type_oem:
+- default:
++ E1000_WRITE_REG(hw, TDLEN, tdlen);
++ E1000_WRITE_REG(hw, TDH, 0x0);
++ E1000_WRITE_REG(hw, TDT, 0x0);
++ adapter->tx_ring[0x0].tdh = E1000_TDH;
++ adapter->tx_ring[0x0].tdt = E1000_TDT;
++ break;
++ }
++
++ /* Set the default values for the Tx Inter Packet Gap timer */
++
++ switch (hw->mac_type) {
++ case iegbe_82542_rev2_0:
++ case iegbe_82542_rev2_1:
++ tipg = DEFAULT_82542_TIPG_IPGT;
++ tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
++ tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
++ break;
++ default:
++ switch(hw->media_type) {
++ case iegbe_media_type_fiber:
++ case iegbe_media_type_internal_serdes:
++ tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
++ break;
++ case iegbe_media_type_copper:
++ tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
++ break;
++ case iegbe_media_type_oem:
++ default:
+ tipg = (0xFFFFFFFFUL >> (sizeof(tipg)*0x8 -
+ E1000_TIPG_IPGR1_SHIFT))
+- & iegbe_oem_get_tipg(&adapter->hw);
+- break;
+- }
+- tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
+- tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
+- }
+- E1000_WRITE_REG(hw, TIPG, tipg);
++ & iegbe_oem_get_tipg(&adapter->hw);
++ break;
++ }
++ tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
++ tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
++ }
++ E1000_WRITE_REG(hw, TIPG, tipg);
+
+- /* Set the Tx Interrupt Delay register */
++ /* Set the Tx Interrupt Delay register */
+
+- E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
++ E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
+ if (hw->mac_type >= iegbe_82540) {
+- E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
++ E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
+ }
+- /* Program the Transmit Control Register */
++ /* Program the Transmit Control Register */
+
+- tctl = E1000_READ_REG(hw, TCTL);
++ tctl = E1000_READ_REG(hw, TCTL);
+
+- tctl &= ~E1000_TCTL_CT;
+- tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
+- (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
++ tctl &= ~E1000_TCTL_CT;
++ tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
++ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+- E1000_WRITE_REG(hw, TCTL, tctl);
++ E1000_WRITE_REG(hw, TCTL, tctl);
+
+- if (hw->mac_type == iegbe_82571 || hw->mac_type == iegbe_82572) {
+- tarc = E1000_READ_REG(hw, TARC0);
++ if (hw->mac_type == iegbe_82571 || hw->mac_type == iegbe_82572) {
++ tarc = E1000_READ_REG(hw, TARC0);
+ tarc |= ((0x1 << 0x19) | (0x1 << 0x15));
+- E1000_WRITE_REG(hw, TARC0, tarc);
+- tarc = E1000_READ_REG(hw, TARC1);
++ E1000_WRITE_REG(hw, TARC0, tarc);
++ tarc = E1000_READ_REG(hw, TARC1);
+ tarc |= (0x1 << 0x19);
+ if (tctl & E1000_TCTL_MULR) {
+ tarc &= ~(0x1 << 0x1c);
+ } else {
+ tarc |= (0x1 << 0x1c);
+ }
+- E1000_WRITE_REG(hw, TARC1, tarc);
+- }
++ E1000_WRITE_REG(hw, TARC1, tarc);
++ }
+
+- iegbe_config_collision_dist(hw);
++ iegbe_config_collision_dist(hw);
+
+- /* Setup Transmit Descriptor Settings for eop descriptor */
+- adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
+- E1000_TXD_CMD_IFCS;
++ /* Setup Transmit Descriptor Settings for eop descriptor */
++ adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
++ E1000_TXD_CMD_IFCS;
+
+ if (hw->mac_type < iegbe_82543) {
+- adapter->txd_cmd |= E1000_TXD_CMD_RPS;
++ adapter->txd_cmd |= E1000_TXD_CMD_RPS;
+ } else {
+-#ifdef IEGBE_GBE_WORKAROUND
+- /* Disable the RS bit in the Tx descriptor */
+- adapter->txd_cmd &= ~E1000_TXD_CMD_RS;
+-#else
+- adapter->txd_cmd |= E1000_TXD_CMD_RS;
+-#endif
++ adapter->txd_cmd |= E1000_TXD_CMD_RS;
+ }
+- /* Cache if we're 82544 running in PCI-X because we'll
+- * need this to apply a workaround later in the send path. */
+- if (hw->mac_type == iegbe_82544 &&
++ /* Cache if we're 82544 running in PCI-X because we'll
++ * need this to apply a workaround later in the send path. */
++ if (hw->mac_type == iegbe_82544 &&
+ hw->bus_type == iegbe_bus_type_pcix) {
+ adapter->pcix_82544 = 0x1;
+ }
+@@ -1632,96 +1527,95 @@ iegbe_configure_tx(struct iegbe_adapter
+ * Returns 0 on success, negative on failure
+ **/
+
+-int
+-iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
++static int iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rxdr)
+ {
+- struct pci_dev *pdev = adapter->pdev;
+- int size, desc_len;
+-
+- size = sizeof(struct iegbe_buffer) * rxdr->count;
+- rxdr->buffer_info = vmalloc(size);
+- if (!rxdr->buffer_info) {
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate memory for the receive descriptor ring\n");
+- return -ENOMEM;
+- }
+- memset(rxdr->buffer_info, 0, size);
+-
+- size = sizeof(struct iegbe_ps_page) * rxdr->count;
+- rxdr->ps_page = kmalloc(size, GFP_KERNEL);
+- if (!rxdr->ps_page) {
+- vfree(rxdr->buffer_info);
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate memory for the receive descriptor ring\n");
+- return -ENOMEM;
+- }
+- memset(rxdr->ps_page, 0, size);
+-
+- size = sizeof(struct iegbe_ps_page_dma) * rxdr->count;
+- rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
+- if (!rxdr->ps_page_dma) {
+- vfree(rxdr->buffer_info);
+- kfree(rxdr->ps_page);
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate memory for the receive descriptor ring\n");
+- return -ENOMEM;
+- }
+- memset(rxdr->ps_page_dma, 0, size);
++ struct iegbe_hw *hw = &adapter->hw;
++ struct pci_dev *pdev = adapter->pdev;
++ int size, desc_len;
+
+- if (adapter->hw.mac_type <= iegbe_82547_rev_2) {
+- desc_len = sizeof(struct iegbe_rx_desc);
+- } else {
+- desc_len = sizeof(union iegbe_rx_desc_packet_split);
++ size = sizeof(struct iegbe_buffer) * rxdr->count;
++ rxdr->buffer_info = vmalloc(size);
++ if (!rxdr->buffer_info) {
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate memory for the receive descriptor ring\n");
++ return -ENOMEM;
+ }
+- /* Round up to nearest 4K */
+-
+- rxdr->size = rxdr->count * desc_len;
+- E1000_ROUNDUP(rxdr->size, 0x1000);
+-
+- rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
++ memset(rxdr->buffer_info, 0, size);
+
+- if (!rxdr->desc) {
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate memory for the receive descriptor ring\n");
++ rxdr->ps_page = kcalloc(rxdr->count, sizeof(struct iegbe_ps_page),
++ GFP_KERNEL);
++ if (!rxdr->ps_page) {
++ vfree(rxdr->buffer_info);
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate memory for the receive descriptor ring\n");
++ return -ENOMEM;
++ }
++
++ rxdr->ps_page_dma = kcalloc(rxdr->count,
++ sizeof(struct iegbe_ps_page_dma),
++ GFP_KERNEL);
++ if (!rxdr->ps_page_dma) {
++ vfree(rxdr->buffer_info);
++ kfree(rxdr->ps_page);
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate memory for the receive descriptor ring\n");
++ return -ENOMEM;
++ }
++
++ if (hw->mac_type <= iegbe_82547_rev_2)
++ desc_len = sizeof(struct iegbe_rx_desc);
++ else
++ desc_len = sizeof(union iegbe_rx_desc_packet_split);
++
++ /* Round up to nearest 4K */
++
++ rxdr->size = rxdr->count * desc_len;
++ rxdr->size = ALIGN(rxdr->size, 4096);
++
++ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
++
++ if (!rxdr->desc) {
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate memory for the receive descriptor ring\n");
+ setup_rx_desc_die:
+- vfree(rxdr->buffer_info);
+- kfree(rxdr->ps_page);
+- kfree(rxdr->ps_page_dma);
+- return -ENOMEM;
+- }
+-
+- /* Fix for errata 23, can't cross 64kB boundary */
+- if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+- void *olddesc = rxdr->desc;
+- dma_addr_t olddma = rxdr->dma;
+- DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
+- "at %p\n", rxdr->size, rxdr->desc);
+- /* Try again, without freeing the previous */
+- rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+- /* Failed allocation, critical failure */
+- if (!rxdr->desc) {
+- pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate memory "
+- "for the receive descriptor ring\n");
+- goto setup_rx_desc_die;
+- }
++ vfree(rxdr->buffer_info);
++ kfree(rxdr->ps_page);
++ kfree(rxdr->ps_page_dma);
++ return -ENOMEM;
++ }
++
++ /* Fix for errata 23, can't cross 64kB boundary */
++ if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
++ void *olddesc = rxdr->desc;
++ dma_addr_t olddma = rxdr->dma;
++ DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
++ "at %p\n", rxdr->size, rxdr->desc);
++ /* Try again, without freeing the previous */
++ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
++ /* Failed allocation, critical failure */
++ if (!rxdr->desc) {
++ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate memory "
++ "for the receive descriptor ring\n");
++ goto setup_rx_desc_die;
++ }
+
+- if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+- /* give up */
+- pci_free_consistent(pdev, rxdr->size, rxdr->desc,
+- rxdr->dma);
+- pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+- DPRINTK(PROBE, ERR,
+- "Unable to allocate aligned memory "
+- "for the receive descriptor ring\n");
+- goto setup_rx_desc_die;
+- } else {
+- /* Free old allocation, new allocation was successful */
+- pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+- }
+- }
++ if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
++ /* give up */
++ pci_free_consistent(pdev, rxdr->size, rxdr->desc,
++ rxdr->dma);
++ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
++ DPRINTK(PROBE, ERR,
++ "Unable to allocate aligned memory "
++ "for the receive descriptor ring\n");
++ goto setup_rx_desc_die;
++ } else {
++ /* Free old allocation, new allocation was successful */
++ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
++ }
++ }
+ memset(rxdr->desc, 0, rxdr->size);
+
+ rxdr->next_to_clean = 0;
+@@ -1732,7 +1626,7 @@ setup_rx_desc_die:
+
+ /**
+ * iegbe_setup_all_rx_resources - wrapper to allocate Rx resources
+- * (Descriptors) for all queues
++ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+@@ -1742,21 +1636,23 @@ setup_rx_desc_die:
+ * Return 0 on success, negative on failure
+ **/
+
+-int
+-iegbe_setup_all_rx_resources(struct iegbe_adapter *adapter)
++int iegbe_setup_all_rx_resources(struct iegbe_adapter *adapter)
+ {
+ int i, err = 0;
+
+- for (i = 0; i < adapter->num_queues; i++) {
++ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = iegbe_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Rx Queue %u failed\n", i);
++ for (i-- ; i >= 0; i--)
++ iegbe_free_rx_resources(adapter,
++ &adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+- return err;
++ return err;
+ }
+
+ /**
+@@ -1765,105 +1661,104 @@ iegbe_setup_all_rx_resources(struct iegb
+ **/
+ #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
+ (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
+-static void
+-iegbe_setup_rctl(struct iegbe_adapter *adapter)
++static void iegbe_setup_rctl(struct iegbe_adapter *adapter)
+ {
+- uint32_t rctl, rfctl;
+- uint32_t psrctl = 0;
+-#ifdef CONFIG_E1000_PACKET_SPLIT
+- uint32_t pages = 0;
+-#endif
+-
+- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+-
+- rctl &= ~(0x3 << E1000_RCTL_MO_SHIFT);
+-
+- rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+- (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
+-
+- if(adapter->hw.tbi_compatibility_on == 0x1) {
+- rctl |= E1000_RCTL_SBP;
+- } else {
+- rctl &= ~E1000_RCTL_SBP;
+- }
+- if(adapter->netdev->mtu <= ETH_DATA_LEN) {
+- rctl &= ~E1000_RCTL_LPE;
+- } else {
+- rctl |= E1000_RCTL_LPE;
+- }
+- /* Setup buffer sizes */
+- if(adapter->hw.mac_type >= iegbe_82571) {
+- /* We can now specify buffers in 1K increments.
+- * BSIZE and BSEX are ignored in this case. */
+- rctl |= adapter->rx_buffer_len << 0x11;
+- } else {
+- rctl &= ~E1000_RCTL_SZ_4096;
+- rctl |= E1000_RCTL_BSEX;
+- switch (adapter->rx_buffer_len) {
+- case E1000_RXBUFFER_2048:
+- default:
+- rctl |= E1000_RCTL_SZ_2048;
++ struct iegbe_hw *hw = &adapter->hw;
++ u32 rctl, rfctl;
++ u32 psrctl = 0;
++#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
++ u32 pages = 0;
++#endif
++
++ rctl = E1000_READ_REG(&adapter->hw, RCTL);
++
++ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
++
++ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
++ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
++ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
++
++ if (hw->tbi_compatibility_on == 1)
++ rctl |= E1000_RCTL_SBP;
++ else
++ rctl &= ~E1000_RCTL_SBP;
++
++ if (adapter->netdev->mtu <= ETH_DATA_LEN)
++ rctl &= ~E1000_RCTL_LPE;
++ else
++ rctl |= E1000_RCTL_LPE;
++
++ /* Setup buffer sizes */
++ /* We can now specify buffers in 1K increments.
++ * BSIZE and BSEX are ignored in this case. */
++ rctl &= ~E1000_RCTL_SZ_4096;
++ rctl |= E1000_RCTL_BSEX;
++ switch (adapter->rx_buffer_len) {
++ case E1000_RXBUFFER_256:
++ rctl |= E1000_RCTL_SZ_256;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+- case E1000_RXBUFFER_4096:
+- rctl |= E1000_RCTL_SZ_4096;
+- break;
+- case E1000_RXBUFFER_8192:
+- rctl |= E1000_RCTL_SZ_8192;
+- break;
+- case E1000_RXBUFFER_16384:
+- rctl |= E1000_RCTL_SZ_16384;
+- break;
+- }
+- }
++ case E1000_RXBUFFER_2048:
++ default:
++ rctl |= E1000_RCTL_SZ_2048;
++ rctl &= ~E1000_RCTL_BSEX;
++ break;
++ case E1000_RXBUFFER_4096:
++ rctl |= E1000_RCTL_SZ_4096;
++ break;
++ case E1000_RXBUFFER_8192:
++ rctl |= E1000_RCTL_SZ_8192;
++ break;
++ case E1000_RXBUFFER_16384:
++ rctl |= E1000_RCTL_SZ_16384;
++ break;
++ }
+
+-#ifdef CONFIG_E1000_PACKET_SPLIT
+- /* 82571 and greater support packet-split where the protocol
+- * header is placed in skb->data and the packet data is
+- * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
+- * In the case of a non-split, skb->data is linearly filled,
+- * followed by the page buffers. Therefore, skb->data is
+- * sized to hold the largest protocol header.
+- */
+- pages = PAGE_USE_COUNT(adapter->netdev->mtu);
+- if ((adapter->hw.mac_type > iegbe_82547_rev_2) && (pages <= 0x3) &&
+- PAGE_SIZE <= 0x4000) {
+- adapter->rx_ps_pages = pages;
+- } else {
++#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
++ /* 82571 and greater support packet-split where the protocol
++ * header is placed in skb->data and the packet data is
++ * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
++ * In the case of a non-split, skb->data is linearly filled,
++ * followed by the page buffers. Therefore, skb->data is
++ * sized to hold the largest protocol header.
++ */
++ pages = PAGE_USE_COUNT(adapter->netdev->mtu);
++ if ((hw->mac_type >= iegbe_82571) && (pages <= 3) &&
++ PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
++ adapter->rx_ps_pages = pages;
++ else
+ adapter->rx_ps_pages = 0;
+- }
+ #endif
+- if (adapter->rx_ps_pages) {
+- /* Configure extra packet-split registers */
+- rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
+- rfctl |= E1000_RFCTL_EXTEN;
+- /* disable IPv6 packet split support */
+- rfctl |= E1000_RFCTL_IPV6_DIS;
+- E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
+-
+- rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
+-
+- psrctl |= adapter->rx_ps_bsize0 >>
+- E1000_PSRCTL_BSIZE0_SHIFT;
+-
+- switch (adapter->rx_ps_pages) {
+- case 0x3:
+- psrctl |= PAGE_SIZE <<
+- E1000_PSRCTL_BSIZE3_SHIFT;
+- case 0x2:
+- psrctl |= PAGE_SIZE <<
+- E1000_PSRCTL_BSIZE2_SHIFT;
+- case 0x1:
+- psrctl |= PAGE_SIZE >>
+- E1000_PSRCTL_BSIZE1_SHIFT;
+- break;
+- }
++ if (adapter->rx_ps_pages) {
++ /* Configure extra packet-split registers */
++ rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
++ rfctl |= E1000_RFCTL_EXTEN;
++ /* disable IPv6 packet split support */
++ rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
++ E1000_RFCTL_NEW_IPV6_EXT_DIS);
++
++ rctl |= E1000_RCTL_DTYP_PS;
++
++ psrctl |= adapter->rx_ps_bsize0 >>
++ E1000_PSRCTL_BSIZE0_SHIFT;
++
++ switch (adapter->rx_ps_pages) {
++ case 3:
++ psrctl |= PAGE_SIZE <<
++ E1000_PSRCTL_BSIZE3_SHIFT;
++ case 2:
++ psrctl |= PAGE_SIZE <<
++ E1000_PSRCTL_BSIZE2_SHIFT;
++ case 1:
++ psrctl |= PAGE_SIZE >>
++ E1000_PSRCTL_BSIZE1_SHIFT;
++ break;
++ }
+
+- E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
+- }
++ E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
++ }
+
+- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
++ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ }
+
+ /**
+@@ -1873,145 +1768,87 @@ iegbe_setup_rctl(struct iegbe_adapter *a
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+
+-static void
+-iegbe_configure_rx(struct iegbe_adapter *adapter)
++static void iegbe_configure_rx(struct iegbe_adapter *adapter)
+ {
+- uint64_t rdba;
+- struct iegbe_hw *hw = &adapter->hw;
+- uint32_t rdlen, rctl, rxcsum, ctrl_ext;
+-#ifdef CONFIG_E1000_MQ
+- uint32_t reta, mrqc;
+- int i;
+-#endif
++ u64 rdba;
++ struct iegbe_hw *hw = &adapter->hw;
++ u32 rdlen, rctl, rxcsum, ctrl_ext;
+
+- if (adapter->rx_ps_pages) {
++ if (adapter->rx_ps_pages) {
+ rdlen = adapter->rx_ring[0].count *
+- sizeof(union iegbe_rx_desc_packet_split);
+- adapter->clean_rx = iegbe_clean_rx_irq_ps;
+- adapter->alloc_rx_buf = iegbe_alloc_rx_buffers_ps;
+- } else {
++ sizeof(union iegbe_rx_desc_packet_split);
++ adapter->clean_rx = iegbe_clean_rx_irq_ps;
++ adapter->alloc_rx_buf = iegbe_alloc_rx_buffers_ps;
++ } else {
+ rdlen = adapter->rx_ring[0].count *
+- sizeof(struct iegbe_rx_desc);
+- adapter->clean_rx = iegbe_clean_rx_irq;
+- adapter->alloc_rx_buf = iegbe_alloc_rx_buffers;
+- }
++ sizeof(struct iegbe_rx_desc);
++ adapter->clean_rx = iegbe_clean_rx_irq;
++ adapter->alloc_rx_buf = iegbe_alloc_rx_buffers;
++ }
+
+- /* disable receives while setting up the descriptors */
+- rctl = E1000_READ_REG(hw, RCTL);
+- E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
++ /* disable receives while setting up the descriptors */
++ rctl = E1000_READ_REG(hw, RCTL);
++ E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+
+- /* set the Receive Delay Timer Register */
+- E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
++ /* set the Receive Delay Timer Register */
++ E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
+
+- if (hw->mac_type >= iegbe_82540) {
+- E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
+- if(adapter->itr > 0x1) {
+- E1000_WRITE_REG(hw, ITR,
+- 0x3b9aca00 / (adapter->itr * 0x100));
++ if (hw->mac_type >= iegbe_82540) {
++ E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
++ if (adapter->itr_setting != 0)
++ E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (adapter->itr * 256));
+ }
+- }
+
+- if (hw->mac_type >= iegbe_82571) {
+- /* Reset delay timers after every interrupt */
+- ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+- ctrl_ext |= E1000_CTRL_EXT_CANC;
+- E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+- E1000_WRITE_FLUSH(hw);
+- }
++ if (hw->mac_type >= iegbe_82571) {
++ /* Reset delay timers after every interrupt */
++ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
++ ctrl_ext |= E1000_CTRL_EXT_CANC;
++ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
++ E1000_WRITE_FLUSH(hw);
++ }
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+- switch (adapter->num_queues) {
+-#ifdef CONFIG_E1000_MQ
+- case 0x2:
+- rdba = adapter->rx_ring[0x1].dma;
+- E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL));
+- E1000_WRITE_REG(hw, RDBAH1, (rdba >> 0x20));
+- E1000_WRITE_REG(hw, RDLEN1, rdlen);
+- E1000_WRITE_REG(hw, RDH1, 0);
+- E1000_WRITE_REG(hw, RDT1, 0);
+- adapter->rx_ring[1].rdh = E1000_RDH1;
+- adapter->rx_ring[1].rdt = E1000_RDT1;
+- /* Fall Through */
+-#endif
+- case 0x1:
+- default:
++ switch (adapter->num_rx_queues) {
++ case 1:
++ default:
+ rdba = adapter->rx_ring[0].dma;
+- E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
++ E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, RDBAH, (rdba >> 0x20));
+- E1000_WRITE_REG(hw, RDLEN, rdlen);
+- E1000_WRITE_REG(hw, RDH, 0);
+- E1000_WRITE_REG(hw, RDT, 0);
+- adapter->rx_ring[0].rdh = E1000_RDH;
+- adapter->rx_ring[0].rdt = E1000_RDT;
+- break;
+- }
++ E1000_WRITE_REG(hw, RDLEN, rdlen);
++ adapter->rx_ring[0].rdh = ((hw->mac_type >= iegbe_82543) ? E1000_RDH : E1000_82542_RDH);
++ adapter->rx_ring[0].rdt = ((hw->mac_type >= iegbe_82543) ? E1000_RDT : E1000_82542_RDT);
++ break;
++ }
+
+-#ifdef CONFIG_E1000_MQ
+- if (adapter->num_queues > 0x1) {
+- uint32_t random[0xa];
+-
+- get_random_bytes(&random[0], FORTY);
+-
+- if (hw->mac_type <= iegbe_82572) {
+- E1000_WRITE_REG(hw, RSSIR, 0);
+- E1000_WRITE_REG(hw, RSSIM, 0);
+- }
+
+- switch (adapter->num_queues) {
+- case 0x2:
+- default:
+- reta = 0x00800080;
+- mrqc = E1000_MRQC_ENABLE_RSS_2Q;
+- break;
+- }
+-
+- /* Fill out redirection table */
+- for (i = 0; i < 0x20; i++)
+- E1000_WRITE_REG_ARRAY(hw, RETA, i, reta);
+- /* Fill out hash function seeds */
+- for (i = 0; i < 0xa; i++)
+- E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]);
+-
+- mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
+- E1000_MRQC_RSS_FIELD_IPV4_TCP);
+- E1000_WRITE_REG(hw, MRQC, mrqc);
+- }
+-
+- /* Multiqueue and packet checksumming are mutually exclusive. */
+- if (hw->mac_type >= iegbe_82571) {
+- rxcsum = E1000_READ_REG(hw, RXCSUM);
+- rxcsum |= E1000_RXCSUM_PCSD;
+- E1000_WRITE_REG(hw, RXCSUM, rxcsum);
+- }
+-
+-#else
++ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
++ if (hw->mac_type >= iegbe_82543) {
++ rxcsum = E1000_READ_REG(hw, RXCSUM);
++ if(adapter->rx_csum == TRUE) {
++ rxcsum |= E1000_RXCSUM_TUOFL;
++
++ /* Enable 82571 IPv4 payload checksum for UDP fragments
++ * Must be used in conjunction with packet-split. */
++ if ((hw->mac_type >= iegbe_82571) &&
++ (adapter->rx_ps_pages)) {
++ rxcsum |= E1000_RXCSUM_IPPCSE;
++ }
++ } else {
++ rxcsum &= ~E1000_RXCSUM_TUOFL;
++ /* don't need to clear IPPCSE as it defaults to 0 */
++ }
++ E1000_WRITE_REG(hw, RXCSUM, rxcsum);
++ }
+
+- /* Enable 82543 Receive Checksum Offload for TCP and UDP */
+- if (hw->mac_type >= iegbe_82543) {
+- rxcsum = E1000_READ_REG(hw, RXCSUM);
+- if(adapter->rx_csum == TRUE) {
+- rxcsum |= E1000_RXCSUM_TUOFL;
+-
+- /* Enable 82571 IPv4 payload checksum for UDP fragments
+- * Must be used in conjunction with packet-split. */
+- if ((hw->mac_type >= iegbe_82571) &&
+- (adapter->rx_ps_pages)) {
+- rxcsum |= E1000_RXCSUM_IPPCSE;
+- }
+- } else {
+- rxcsum &= ~E1000_RXCSUM_TUOFL;
+- /* don't need to clear IPPCSE as it defaults to 0 */
+- }
+- E1000_WRITE_REG(hw, RXCSUM, rxcsum);
+- }
+-#endif /* CONFIG_E1000_MQ */
++ /* enable early receives on 82573, only takes effect if using > 2048
++ * byte total frame size. for example only for jumbo frames */
++#define E1000_ERT_2048 0x100
++ if (hw->mac_type == iegbe_82573)
++ E1000_WRITE_REG(&adapter->hw, ERT, E1000_ERT_2048);
+
+- if (hw->mac_type == iegbe_82573) {
+- E1000_WRITE_REG(hw, ERT, 0x0100);
+- }
+ /* Enable Receives */
+- E1000_WRITE_REG(hw, RCTL, rctl);
++ E1000_WRITE_REG(hw, RCTL, rctl);
+ }
+
+ /**
+@@ -2022,20 +1859,19 @@ iegbe_configure_rx(struct iegbe_adapter
+ * Free all transmit software resources
+ **/
+
+-void
+-iegbe_free_tx_resources(struct iegbe_adapter *adapter,
++static void iegbe_free_tx_resources(struct iegbe_adapter *adapter,
+ struct iegbe_tx_ring *tx_ring)
+ {
+- struct pci_dev *pdev = adapter->pdev;
++ struct pci_dev *pdev = adapter->pdev;
+
+- iegbe_clean_tx_ring(adapter, tx_ring);
++ iegbe_clean_tx_ring(adapter, tx_ring);
+
+- vfree(tx_ring->buffer_info);
+- tx_ring->buffer_info = NULL;
++ vfree(tx_ring->buffer_info);
++ tx_ring->buffer_info = NULL;
+
+- pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
++ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+- tx_ring->desc = NULL;
++ tx_ring->desc = NULL;
+ }
+
+ /**
+@@ -2048,85 +1884,29 @@ iegbe_free_tx_resources(struct iegbe_ada
+ void
+ iegbe_free_all_tx_resources(struct iegbe_adapter *adapter)
+ {
+- int i;
++ int i;
+
+- for (i = 0; i < adapter->num_queues; i++)
++ for (i = 0x0; i < adapter->num_tx_queues; i++)
+ iegbe_free_tx_resources(adapter, &adapter->tx_ring[i]);
+ }
+
+ static inline void
+ iegbe_unmap_and_free_tx_resource(struct iegbe_adapter *adapter,
+- struct iegbe_buffer *buffer_info)
+-{
+- if(buffer_info->dma) {
+- pci_unmap_page(adapter->pdev,
+- buffer_info->dma,
+- buffer_info->length,
+- PCI_DMA_TODEVICE);
+- buffer_info->dma = 0;
+- }
+- if(buffer_info->skb) {
+- dev_kfree_skb_any(buffer_info->skb);
+- buffer_info->skb = NULL;
+- }
+-}
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+-/**
+- * iegbe_clean_tx_ring_partial - Free Tx Buffers without using the DD
+- * bit in the descriptor
+- * @adapter: board private structure
+- * @tx_ring: ring to be cleaned
+- **/
+-static void iegbe_clean_tx_ring_partial(struct iegbe_adapter *adapter,
+- struct iegbe_tx_ring *tx_ring)
++ struct iegbe_buffer *buffer_info)
+ {
+- struct iegbe_buffer *buffer_info;
+- struct iegbe_tx_desc *tx_desc;
+- struct net_device *netdev = adapter->netdev;
+- unsigned int i;
+- unsigned tail;
+- unsigned head;
+- int cleaned = FALSE;
+-
+- tail = readl(adapter->hw.hw_addr + tx_ring->tdt);
+- head = readl(adapter->hw.hw_addr + tx_ring->tdh);
+-
+- if (head != tail) {
+- adapter->stats.tx_hnet++;
+- }
+- if (head != tx_ring->next_to_use) {
+- adapter->stats.tx_hnentu++;
+- }
+- /* Free all the Tx ring sk_buffs from next_to_clean up until
+- * the current head pointer
+- */
+- i = tx_ring->next_to_clean;
+- while(i != head) {
+- cleaned = TRUE;
+- tx_desc = E1000_TX_DESC(*tx_ring, i);
+-
+- buffer_info = &tx_ring->buffer_info[i];
+- iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
+-
+- tx_desc->upper.data = 0;
+-
+- if (unlikely(++i == tx_ring->count)) { i = 0; }
+-
+- }
+- tx_ring->next_to_clean = head;
+-
+- spin_lock(&tx_ring->tx_lock);
+-
+- /* Wake up the queue if it's currently stopped */
+- if (unlikely(cleaned && netif_queue_stopped(netdev) &&
+- netif_carrier_ok(netdev))) {
+- netif_wake_queue(netdev);
++ if(buffer_info->dma) {
++ pci_unmap_page(adapter->pdev,
++ buffer_info->dma,
++ buffer_info->length,
++ PCI_DMA_TODEVICE);
++ buffer_info->dma = 0x0;
++ }
++ if(buffer_info->skb) {
++ dev_kfree_skb_any(buffer_info->skb);
++ buffer_info->skb = NULL;
+ }
+-
+- spin_unlock(&tx_ring->tx_lock);
+ }
+-#endif
++
+
+ /**
+ * iegbe_clean_tx_ring - Free Tx Buffers
+@@ -2134,38 +1914,34 @@ static void iegbe_clean_tx_ring_partial(
+ * @tx_ring: ring to be cleaned
+ **/
+
+-static void
+-iegbe_clean_tx_ring(struct iegbe_adapter *adapter,
++static void iegbe_clean_tx_ring(struct iegbe_adapter *adapter,
+ struct iegbe_tx_ring *tx_ring)
+ {
+- struct iegbe_buffer *buffer_info;
+- unsigned long size;
+- unsigned int i;
+-
+- /* Free all the Tx ring sk_buffs */
++ struct iegbe_hw *hw = &adapter->hw;
++ struct iegbe_buffer *buffer_info;
++ unsigned long size;
++ unsigned int i;
+
+- if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
+- iegbe_unmap_and_free_tx_resource(adapter,
+- &tx_ring->previous_buffer_info);
+- }
++ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+- buffer_info = &tx_ring->buffer_info[i];
+- iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
+- }
++ buffer_info = &tx_ring->buffer_info[i];
++ iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
++ }
+
+- size = sizeof(struct iegbe_buffer) * tx_ring->count;
++ size = sizeof(struct iegbe_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+- /* Zero out the descriptor ring */
++ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
++ tx_ring->last_tx_tso = 0;
+
+- writel(0, adapter->hw.hw_addr + tx_ring->tdh);
+- writel(0, adapter->hw.hw_addr + tx_ring->tdt);
++ writel(0, hw->hw_addr + tx_ring->tdh);
++ writel(0, hw->hw_addr + tx_ring->tdt);
+ }
+
+ /**
+@@ -2173,12 +1949,11 @@ iegbe_clean_tx_ring(struct iegbe_adapter
+ * @adapter: board private structure
+ **/
+
+-static void
+-iegbe_clean_all_tx_rings(struct iegbe_adapter *adapter)
++static void iegbe_clean_all_tx_rings(struct iegbe_adapter *adapter)
+ {
+- int i;
++ int i;
+
+- for (i = 0; i < adapter->num_queues; i++)
++ for (i = 0; i < adapter->num_tx_queues; i++)
+ iegbe_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+ }
+
+@@ -2190,24 +1965,23 @@ iegbe_clean_all_tx_rings(struct iegbe_ad
+ * Free all receive software resources
+ **/
+
+-void
+-iegbe_free_rx_resources(struct iegbe_adapter *adapter,
++static void iegbe_free_rx_resources(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring)
+ {
+- struct pci_dev *pdev = adapter->pdev;
++ struct pci_dev *pdev = adapter->pdev;
+
+- iegbe_clean_rx_ring(adapter, rx_ring);
++ iegbe_clean_rx_ring(adapter, rx_ring);
+
+- vfree(rx_ring->buffer_info);
+- rx_ring->buffer_info = NULL;
+- kfree(rx_ring->ps_page);
+- rx_ring->ps_page = NULL;
+- kfree(rx_ring->ps_page_dma);
+- rx_ring->ps_page_dma = NULL;
++ vfree(rx_ring->buffer_info);
++ rx_ring->buffer_info = NULL;
++ kfree(rx_ring->ps_page);
++ rx_ring->ps_page = NULL;
++ kfree(rx_ring->ps_page_dma);
++ rx_ring->ps_page_dma = NULL;
+
+- pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
++ pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+
+- rx_ring->desc = NULL;
++ rx_ring->desc = NULL;
+ }
+
+ /**
+@@ -2217,12 +1991,11 @@ iegbe_free_rx_resources(struct iegbe_ada
+ * Free all receive software resources
+ **/
+
+-void
+-iegbe_free_all_rx_resources(struct iegbe_adapter *adapter)
++void iegbe_free_all_rx_resources(struct iegbe_adapter *adapter)
+ {
+- int i;
++ int i;
+
+- for (i = 0; i < adapter->num_queues; i++)
++ for (i = 0; i < adapter->num_rx_queues; i++)
+ iegbe_free_rx_resources(adapter, &adapter->rx_ring[i]);
+ }
+
+@@ -2232,60 +2005,59 @@ iegbe_free_all_rx_resources(struct iegbe
+ * @rx_ring: ring to free buffers from
+ **/
+
+-static void
+-iegbe_clean_rx_ring(struct iegbe_adapter *adapter,
++static void iegbe_clean_rx_ring(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring)
+ {
+- struct iegbe_buffer *buffer_info;
+- struct iegbe_ps_page *ps_page;
+- struct iegbe_ps_page_dma *ps_page_dma;
+- struct pci_dev *pdev = adapter->pdev;
+- unsigned long size;
+- unsigned int i, j;
+-
+- /* Free all the Rx ring sk_buffs */
++ struct iegbe_hw *hw = &adapter->hw;
++ struct iegbe_buffer *buffer_info;
++ struct iegbe_ps_page *ps_page;
++ struct iegbe_ps_page_dma *ps_page_dma;
++ struct pci_dev *pdev = adapter->pdev;
++ unsigned long size;
++ unsigned int i, j;
++
++ /* Free all the Rx ring sk_buffs */
++
++ for (i = 0; i < rx_ring->count; i++) {
++ buffer_info = &rx_ring->buffer_info[i];
++ if(buffer_info->skb) {
++ pci_unmap_single(pdev,
++ buffer_info->dma,
++ buffer_info->length,
++ PCI_DMA_FROMDEVICE);
+
+- for(i = 0; i < rx_ring->count; i++) {
+- buffer_info = &rx_ring->buffer_info[i];
+- if(buffer_info->skb) {
+- ps_page = &rx_ring->ps_page[i];
+- ps_page_dma = &rx_ring->ps_page_dma[i];
+- pci_unmap_single(pdev,
+- buffer_info->dma,
+- buffer_info->length,
+- PCI_DMA_FROMDEVICE);
+-
+- dev_kfree_skb(buffer_info->skb);
+- buffer_info->skb = NULL;
+-
+- for(j = 0; j < adapter->rx_ps_pages; j++) {
+- if(!ps_page->ps_page[j]) { break; }
+- pci_unmap_single(pdev,
+- ps_page_dma->ps_page_dma[j],
+- PAGE_SIZE, PCI_DMA_FROMDEVICE);
+- ps_page_dma->ps_page_dma[j] = 0;
+- put_page(ps_page->ps_page[j]);
+- ps_page->ps_page[j] = NULL;
+- }
++ dev_kfree_skb(buffer_info->skb);
++ buffer_info->skb = NULL;
+ }
+- }
++ ps_page = &rx_ring->ps_page[i];
++ ps_page_dma = &rx_ring->ps_page_dma[i];
++ for (j = 0; j < adapter->rx_ps_pages; j++) {
++ if (!ps_page->ps_page[j]) break;
++ pci_unmap_page(pdev,
++ ps_page_dma->ps_page_dma[j],
++ PAGE_SIZE, PCI_DMA_FROMDEVICE);
++ ps_page_dma->ps_page_dma[j] = 0;
++ put_page(ps_page->ps_page[j]);
++ ps_page->ps_page[j] = NULL;
++ }
++ }
+
+- size = sizeof(struct iegbe_buffer) * rx_ring->count;
++ size = sizeof(struct iegbe_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+- size = sizeof(struct iegbe_ps_page) * rx_ring->count;
++ size = sizeof(struct iegbe_ps_page) * rx_ring->count;
+ memset(rx_ring->ps_page, 0, size);
+- size = sizeof(struct iegbe_ps_page_dma) * rx_ring->count;
++ size = sizeof(struct iegbe_ps_page_dma) * rx_ring->count;
+ memset(rx_ring->ps_page_dma, 0, size);
+
+- /* Zero out the descriptor ring */
++ /* Zero out the descriptor ring */
+
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+- writel(0, adapter->hw.hw_addr + rx_ring->rdh);
+- writel(0, adapter->hw.hw_addr + rx_ring->rdt);
++ writel(0, hw->hw_addr + rx_ring->rdh);
++ writel(0, hw->hw_addr + rx_ring->rdt);
+ }
+
+ /**
+@@ -2293,60 +2065,54 @@ iegbe_clean_rx_ring(struct iegbe_adapter
+ * @adapter: board private structure
+ **/
+
+-static void
+-iegbe_clean_all_rx_rings(struct iegbe_adapter *adapter)
++static void iegbe_clean_all_rx_rings(struct iegbe_adapter *adapter)
+ {
+- int i;
++ int i;
+
+- for (i = 0; i < adapter->num_queues; i++)
++ for (i = 0; i < adapter->num_rx_queues; i++)
+ iegbe_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+ }
+
+ /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
+ * and memory write and invalidate disabled for certain operations
+ */
+-static void
+-iegbe_enter_82542_rst(struct iegbe_adapter *adapter)
++static void iegbe_enter_82542_rst(struct iegbe_adapter *adapter)
+ {
+- struct net_device *netdev = adapter->netdev;
+- uint32_t rctl;
++ struct net_device *netdev = adapter->netdev;
++ uint32_t rctl;
+
+- iegbe_pci_clear_mwi(&adapter->hw);
++ iegbe_pci_clear_mwi(&adapter->hw);
+
+- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+- rctl |= E1000_RCTL_RST;
+- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+- E1000_WRITE_FLUSH(&adapter->hw);
++ rctl = E1000_READ_REG(&adapter->hw, RCTL);
++ rctl |= E1000_RCTL_RST;
++ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
++ E1000_WRITE_FLUSH(&adapter->hw);
+ mdelay(0x5);
+
+ if(netif_running(netdev)) {
+- iegbe_clean_all_rx_rings(adapter);
+-}
++ iegbe_clean_all_rx_rings(adapter);
++ }
+ }
+
+ static void
+ iegbe_leave_82542_rst(struct iegbe_adapter *adapter)
+ {
+- struct net_device *netdev = adapter->netdev;
+- uint32_t rctl;
++ struct net_device *netdev = adapter->netdev;
++ uint32_t rctl;
+
+- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+- rctl &= ~E1000_RCTL_RST;
+- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+- E1000_WRITE_FLUSH(&adapter->hw);
++ rctl = E1000_READ_REG(&adapter->hw, RCTL);
++ rctl &= ~E1000_RCTL_RST;
++ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
++ E1000_WRITE_FLUSH(&adapter->hw);
+ mdelay(0x5);
+
+ if(adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE) {
+- iegbe_pci_set_mwi(&adapter->hw);
++ iegbe_pci_set_mwi(&adapter->hw);
+ }
+ if(netif_running(netdev)) {
++ struct iegbe_rx_ring *ring = &adapter->rx_ring[0x0];
+ iegbe_configure_rx(adapter);
+-#ifdef IEGBE_GBE_WORKAROUND
+- iegbe_alloc_rx_buffers(adapter, &adapter->rx_ring[0],
+- IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS + 1);
+-#else
+- iegbe_alloc_rx_buffers(adapter, &adapter->rx_ring[0]);
+-#endif
++ adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
+ }
+ }
+
+@@ -2358,133 +2124,153 @@ iegbe_leave_82542_rst(struct iegbe_adapt
+ * Returns 0 on success, negative on failure
+ **/
+
+-static int
+-iegbe_set_mac(struct net_device *netdev, void *p)
++static int iegbe_set_mac(struct net_device *netdev, void *p)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- struct sockaddr *addr = p;
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct sockaddr *addr = p;
+
+ if(!is_valid_ether_addr(addr->sa_data)) {
+- return -EADDRNOTAVAIL;
++ return -EADDRNOTAVAIL;
+ }
+- /* 82542 2.0 needs to be in reset to write receive address registers */
++ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if(adapter->hw.mac_type == iegbe_82542_rev2_0) {
+- iegbe_enter_82542_rst(adapter);
++ iegbe_enter_82542_rst(adapter);
+ }
+- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+- memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
++ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
++ memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+
+- iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
++ iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0x0);
+
+- /* With 82571 controllers, LAA may be overwritten (with the default)
+- * due to controller reset from the other port. */
+- if (adapter->hw.mac_type == iegbe_82571) {
+- /* activate the work around */
++ /* With 82571 controllers, LAA may be overwritten (with the default)
++ * due to controller reset from the other port. */
++ if (adapter->hw.mac_type == iegbe_82571) {
++ /* activate the work around */
+ adapter->hw.laa_is_present = 0x1;
+
+- /* Hold a copy of the LAA in RAR[14] This is done so that
+- * between the time RAR[0] gets clobbered and the time it
+- * gets fixed (in iegbe_watchdog), the actual LAA is in one
+- * of the RARs and no incoming packets directed to this port
+- * are dropped. Eventaully the LAA will be in RAR[0] and
+- * RAR[14] */
+- iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr,
++ /* Hold a copy of the LAA in RAR[14] This is done so that
++ * between the time RAR[0] gets clobbered and the time it
++ * gets fixed (in iegbe_watchdog), the actual LAA is in one
++ * of the RARs and no incoming packets directed to this port
++ * are dropped. Eventaully the LAA will be in RAR[0] and
++ * RAR[14] */
++ iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr,
+ E1000_RAR_ENTRIES - 0x1);
+- }
++ }
+
+ if(adapter->hw.mac_type == iegbe_82542_rev2_0) {
+- iegbe_leave_82542_rst(adapter);
++ iegbe_leave_82542_rst(adapter);
+ }
+- return 0;
++ return 0x0;
+ }
+
+ /**
+- * iegbe_set_multi - Multicast and Promiscuous mode set
++ * iegbe_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+- * The set_multi entry point is called whenever the multicast address
+- * list or the network interface flags are updated. This routine is
+- * responsible for configuring the hardware for proper multicast,
++ * The set_rx_mode entry point is called whenever the unicast or multicast
++ * address lists or the network interface flags are updated. This routine is
++ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+
+-static void
+-iegbe_set_multi(struct net_device *netdev)
++static void iegbe_set_rx_mode(struct net_device *netdev)
+ {
+ struct iegbe_adapter *adapter = netdev_priv(netdev);
+ struct iegbe_hw *hw = &adapter->hw;
+- struct dev_mc_list *mc_ptr;
+- uint32_t rctl;
+- uint32_t hash_value;
++ struct dev_addr_list *uc_ptr;
++ struct dev_addr_list *mc_ptr;
++ u32 rctl;
++ u32 hash_value;
+ int i, rar_entries = E1000_RAR_ENTRIES;
++int mta_reg_count = E1000_NUM_MTA_REGISTERS;
+
+ /* reserve RAR[14] for LAA over-write work-around */
+- if (adapter->hw.mac_type == iegbe_82571) {
++ if (hw->mac_type == iegbe_82571)
+ rar_entries--;
+- }
++
+ /* Check for Promiscuous and All Multicast modes */
+
+- rctl = E1000_READ_REG(hw, RCTL);
++ rctl = E1000_READ_REG(&adapter->hw, RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+- } else if (netdev->flags & IFF_ALLMULTI) {
+- rctl |= E1000_RCTL_MPE;
+- rctl &= ~E1000_RCTL_UPE;
++ rctl &= ~E1000_RCTL_VFE;
+ } else {
+- rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
++ if (netdev->flags & IFF_ALLMULTI) {
++ rctl |= E1000_RCTL_MPE;
++ } else {
++ rctl &= ~E1000_RCTL_MPE;
++ }
++ }
++
++ uc_ptr = NULL;
++ if (netdev->uc_count > rar_entries - 1) {
++ rctl |= E1000_RCTL_UPE;
++ } else if (!(netdev->flags & IFF_PROMISC)) {
++ rctl &= ~E1000_RCTL_UPE;
++ uc_ptr = netdev->uc_list;
+ }
+
+- E1000_WRITE_REG(hw, RCTL, rctl);
++ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+- if (hw->mac_type == iegbe_82542_rev2_0) {
++ if (hw->mac_type == iegbe_82542_rev2_0)
+ iegbe_enter_82542_rst(adapter);
+- }
+- /* load the first 14 multicast address into the exact filters 1-14
++
++ /* load the first 14 addresses into the exact filters 1-14. Unicast
++ * addresses take precedence to avoid disabling unicast filtering
++ * when possible.
++ *
+ * RAR 0 is used for the station MAC adddress
+ * if there are not 14 addresses, go ahead and clear the filters
+ * -- with 82571 controllers only 0-13 entries are filled here
+ */
+ mc_ptr = netdev->mc_list;
+
+- for (i = 0x1; i < rar_entries; i++) {
+- if (mc_ptr) {
+- iegbe_rar_set(hw, mc_ptr->dmi_addr, i);
++ for (i = 1; i < rar_entries; i++) {
++ if (uc_ptr) {
++ iegbe_rar_set(hw, uc_ptr->da_addr, i);
++ uc_ptr = uc_ptr->next;
++ } else if (mc_ptr) {
++ iegbe_rar_set(hw, mc_ptr->da_addr, i);
+ mc_ptr = mc_ptr->next;
+ } else {
+- E1000_WRITE_REG_ARRAY(hw, RA, i << 0x1, 0);
+- E1000_WRITE_REG_ARRAY(hw, RA, (i << 0x1) + 0x1, 0);
++ E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
++ E1000_WRITE_FLUSH(&adapter->hw);
++ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
++ E1000_WRITE_FLUSH(&adapter->hw);
+ }
+ }
++ WARN_ON(uc_ptr != NULL);
+
+ /* clear the old settings from the multicast hash table */
+
+- for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
++ for (i = 0; i < mta_reg_count; i++) {
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
++ E1000_WRITE_FLUSH(&adapter->hw);
++ }
+
+ /* load any remaining addresses into the hash table */
+
+ for (; mc_ptr; mc_ptr = mc_ptr->next) {
+- hash_value = iegbe_hash_mc_addr(hw, mc_ptr->dmi_addr);
++ hash_value = iegbe_hash_mc_addr(hw, mc_ptr->da_addr);
+ iegbe_mta_set(hw, hash_value);
+ }
+
+- if (hw->mac_type == iegbe_82542_rev2_0) {
++ if (hw->mac_type == iegbe_82542_rev2_0)
+ iegbe_leave_82542_rst(adapter);
+ }
+-}
+
+ /* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+
+-static void
+-iegbe_update_phy_info(unsigned long data)
++static void iegbe_update_phy_info(unsigned long data)
+ {
+- struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
+- iegbe_phy_get_info(&adapter->hw, &adapter->phy_info);
++ struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
++ struct iegbe_hw *hw = &adapter->hw;
++ iegbe_phy_get_info(hw, &adapter->phy_info);
+ }
+
+ /**
+@@ -2492,54 +2278,54 @@ iegbe_update_phy_info(unsigned long data
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+
+-static void
+-iegbe_82547_tx_fifo_stall(unsigned long data)
++static void iegbe_82547_tx_fifo_stall(unsigned long data)
+ {
+- struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
+- struct net_device *netdev = adapter->netdev;
+- uint32_t tctl;
++ struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
++ struct net_device *netdev = adapter->netdev;
++ u32 tctl;
+
+- if(atomic_read(&adapter->tx_fifo_stall)) {
+- if((E1000_READ_REG(&adapter->hw, TDT) ==
+- E1000_READ_REG(&adapter->hw, TDH)) &&
+- (E1000_READ_REG(&adapter->hw, TDFT) ==
+- E1000_READ_REG(&adapter->hw, TDFH)) &&
+- (E1000_READ_REG(&adapter->hw, TDFTS) ==
+- E1000_READ_REG(&adapter->hw, TDFHS))) {
+- tctl = E1000_READ_REG(&adapter->hw, TCTL);
+- E1000_WRITE_REG(&adapter->hw, TCTL,
+- tctl & ~E1000_TCTL_EN);
+- E1000_WRITE_REG(&adapter->hw, TDFT,
+- adapter->tx_head_addr);
+- E1000_WRITE_REG(&adapter->hw, TDFH,
+- adapter->tx_head_addr);
+- E1000_WRITE_REG(&adapter->hw, TDFTS,
+- adapter->tx_head_addr);
+- E1000_WRITE_REG(&adapter->hw, TDFHS,
+- adapter->tx_head_addr);
+- E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
+- E1000_WRITE_FLUSH(&adapter->hw);
+-
+- adapter->tx_fifo_head = 0;
+- atomic_set(&adapter->tx_fifo_stall, 0);
+- netif_wake_queue(netdev);
+- } else {
++ if(atomic_read(&adapter->tx_fifo_stall)) {
++ if((E1000_READ_REG(&adapter->hw, TDT) ==
++ E1000_READ_REG(&adapter->hw, TDH)) &&
++ (E1000_READ_REG(&adapter->hw, TDFT) ==
++ E1000_READ_REG(&adapter->hw, TDFH)) &&
++ (E1000_READ_REG(&adapter->hw, TDFTS) ==
++ E1000_READ_REG(&adapter->hw, TDFHS))) {
++ tctl = E1000_READ_REG(&adapter->hw, TCTL);
++ E1000_WRITE_REG(&adapter->hw, TCTL,
++ tctl & ~E1000_TCTL_EN);
++ E1000_WRITE_REG(&adapter->hw, TDFT,
++ adapter->tx_head_addr);
++ E1000_WRITE_REG(&adapter->hw, TDFH,
++ adapter->tx_head_addr);
++ E1000_WRITE_REG(&adapter->hw, TDFTS,
++ adapter->tx_head_addr);
++ E1000_WRITE_REG(&adapter->hw, TDFHS,
++ adapter->tx_head_addr);
++ E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
++ E1000_WRITE_FLUSH(&adapter->hw);
++
++ adapter->tx_fifo_head = 0x0;
++ atomic_set(&adapter->tx_fifo_stall, 0x0);
++ netif_wake_queue(netdev);
++ } else {
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 0x1);
+- }
+- }
++ }
++ }
+ }
+
++
+ /**
+ * iegbe_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+-static void
+-iegbe_watchdog(unsigned long data)
++static void iegbe_watchdog(unsigned long data)
+ {
+- struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
+- struct net_device *netdev = adapter->netdev;
+- struct iegbe_tx_ring *txdr = &adapter->tx_ring[0];
+- uint32_t link;
++ struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
++ struct iegbe_hw *hw = &adapter->hw;
++ struct net_device *netdev = adapter->netdev;
++ struct iegbe_tx_ring *txdr = adapter->tx_ring;
++ u32 link, tctl;
+
+ /*
+ * Test the PHY for link status on icp_xxxx MACs.
+@@ -2547,123 +2333,305 @@ iegbe_watchdog(unsigned long data)
+ * in the adapter->hw structure, then set hw->get_link_status = 1
+ */
+ if(adapter->hw.mac_type == iegbe_icp_xxxx) {
+- int isUp = 0;
++ int isUp = 0x0;
+ int32_t ret_val;
+
+ ret_val = iegbe_oem_phy_is_link_up(&adapter->hw, &isUp);
+ if(ret_val != E1000_SUCCESS) {
+- isUp = 0;
+- }
++ isUp = 0x0;
++ }
+ if(isUp != adapter->hw.icp_xxxx_is_link_up) {
+ adapter->hw.get_link_status = 0x1;
+ }
+ }
+
+- iegbe_check_for_link(&adapter->hw);
+- if (adapter->hw.mac_type == iegbe_82573) {
+- iegbe_enable_tx_pkt_filtering(&adapter->hw);
++ iegbe_check_for_link(&adapter->hw);
++ if (adapter->hw.mac_type == iegbe_82573) {
++ iegbe_enable_tx_pkt_filtering(&adapter->hw);
+ #ifdef NETIF_F_HW_VLAN_TX
+ if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) {
+- iegbe_update_mng_vlan(adapter);
++ iegbe_update_mng_vlan(adapter);
+ }
+ #endif
+- }
++ }
+
+- if ((adapter->hw.media_type == iegbe_media_type_internal_serdes) &&
+- !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE)) {
+- link = !adapter->hw.serdes_link_down;
+- } else {
++ if ((adapter->hw.media_type == iegbe_media_type_internal_serdes) &&
++ !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE)) {
++ link = !adapter->hw.serdes_link_down;
++ } else {
+
+- if(adapter->hw.mac_type != iegbe_icp_xxxx) {
+- link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
+- } else {
+- int isUp = 0;
++ if(adapter->hw.mac_type != iegbe_icp_xxxx) {
++ link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
++ } else {
++ int isUp = 0x0;
+ if(iegbe_oem_phy_is_link_up(&adapter->hw, &isUp) != E1000_SUCCESS) {
+- isUp = 0;
++ isUp = 0x0;
+ }
+- link = isUp;
+- }
+- }
++ link = isUp;
++ }
++ }
+
+- if (link) {
+- if (!netif_carrier_ok(netdev)) {
+- iegbe_get_speed_and_duplex(&adapter->hw,
+- &adapter->link_speed,
+- &adapter->link_duplex);
+-
+- DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
+- adapter->link_speed,
+- adapter->link_duplex == FULL_DUPLEX ?
+- "Full Duplex" : "Half Duplex");
++ if (link) {
++ if (!netif_carrier_ok(netdev)) {
++ u32 ctrl;
++ bool txb2b = true;
++ iegbe_get_speed_and_duplex(hw,
++ &adapter->link_speed,
++ &adapter->link_duplex);
+
+- netif_carrier_on(netdev);
+- netif_wake_queue(netdev);
+- mod_timer(&adapter->phy_info_timer, jiffies + 0x2 * HZ);
++ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
++ DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s, "
++ "Flow Control: %s\n",
++ adapter->link_speed,
++ adapter->link_duplex == FULL_DUPLEX ?
++ "Full Duplex" : "Half Duplex",
++ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
++ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
++ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
++ E1000_CTRL_TFCE) ? "TX" : "None" )));
++
++ /* tweak tx_queue_len according to speed/duplex
++ * and adjust the timeout factor */
++ netdev->tx_queue_len = adapter->tx_queue_len;
++ adapter->tx_timeout_factor = 1;
++ switch (adapter->link_speed) {
++ case SPEED_10:
++ txb2b = false;
++ netdev->tx_queue_len = 10;
++ adapter->tx_timeout_factor = 8;
++ break;
++ case SPEED_100:
++ txb2b = false;
++ netdev->tx_queue_len = 100;
++ break;
++ }
++ if ((hw->mac_type == iegbe_82571 ||
++ hw->mac_type == iegbe_82572) &&
++ !txb2b) {
++ u32 tarc0;
++ tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
++ tarc0 &= ~(1 << 21);
++ E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
++ }
++ /* disable TSO for pcie and 10/100 speeds, to avoid
++ * some hardware issues */
++ if (!adapter->tso_force &&
++ hw->bus_type == iegbe_bus_type_pci_express){
++ switch (adapter->link_speed) {
++ case SPEED_10:
++ case SPEED_100:
++ DPRINTK(PROBE,INFO,
++ "10/100 speed: disabling TSO\n");
++ netdev->features &= ~NETIF_F_TSO;
++ netdev->features &= ~NETIF_F_TSO6;
++ break;
++ case SPEED_1000:
++ netdev->features |= NETIF_F_TSO;
++ netdev->features |= NETIF_F_TSO6;
++ break;
++ default:
++ break;
++ }
++ }
++ tctl = E1000_READ_REG(&adapter->hw, TCTL);
++ tctl |= E1000_TCTL_EN;
++ E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
++ netif_carrier_on(netdev);
++ netif_wake_queue(netdev);
++ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
+ adapter->smartspeed = 0;
++ } else {
++ if (hw->rx_needs_kicking) {
++ u32 rctl = E1000_READ_REG(&adapter->hw, RCTL);
++ E1000_WRITE_REG(&adapter->hw, RCTL, rctl | E1000_RCTL_EN);
++ }
+ }
+- } else {
+- if (netif_carrier_ok(netdev)) {
++ } else {
++ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+- DPRINTK(LINK, INFO, "NIC Link is Down\n");
+- netif_carrier_off(netdev);
+- netif_stop_queue(netdev);
+- mod_timer(&adapter->phy_info_timer, jiffies + 0x2 * HZ);
+- }
++ DPRINTK(LINK, INFO, "NIC Link is Down\n");
++ netif_carrier_off(netdev);
++ netif_stop_queue(netdev);
++ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
++ }
+
+- iegbe_smartspeed(adapter);
+- }
++ iegbe_smartspeed(adapter);
++ }
++
++ iegbe_update_stats(adapter);
++
++ hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
++ adapter->tpt_old = adapter->stats.tpt;
++ hw->collision_delta = adapter->stats.colc - adapter->colc_old;
++ adapter->colc_old = adapter->stats.colc;
++
++ adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
++ adapter->gorcl_old = adapter->stats.gorcl;
++ adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
++ adapter->gotcl_old = adapter->stats.gotcl;
++
++ iegbe_update_adaptive(hw);
++
++ if (!netif_carrier_ok(netdev)) {
++ if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
++ /* We've lost link, so the controller stops DMA,
++ * but we've got queued Tx work that's never going
++ * to get done, so reset controller to flush Tx.
++ * (Do the reset outside of interrupt context). */
++ adapter->tx_timeout_count++;
++ schedule_work(&adapter->reset_task);
++ }
++ }
++
++ /* Cause software interrupt to ensure rx ring is cleaned */
++ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
++
++ /* Force detection of hung controller every watchdog period */
++ adapter->detect_tx_hung = TRUE;
++
++ /* With 82571 controllers, LAA may be overwritten due to controller
++ * reset from the other port. Set the appropriate LAA in RAR[0] */
++ if (adapter->hw.mac_type == iegbe_82571 && adapter->hw.laa_is_present) {
++ iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0x0);
++ }
++ /* Reset the timer */
++ mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
++}
++
++enum latency_range {
++ lowest_latency = 0,
++ low_latency = 1,
++ bulk_latency = 2,
++ latency_invalid = 255
++};
+
+- iegbe_update_stats(adapter);
++/**
++ * iegbe_update_itr - update the dynamic ITR value based on statistics
++ * Stores a new ITR value based on packets and byte
++ * counts during the last interrupt. The advantage of per interrupt
++ * computation is faster updates and more accurate ITR for the current
++ * traffic pattern. Constants in this function were computed
++ * based on theoretical maximum wire speed and thresholds were set based
++ * on testing data as well as attempting to minimize response time
++ * while increasing bulk throughput.
++ * this functionality is controlled by the InterruptThrottleRate module
++ * parameter (see iegbe_param.c)
++ * @adapter: pointer to adapter
++ * @itr_setting: current adapter->itr
++ * @packets: the number of packets during this measurement interval
++ * @bytes: the number of bytes during this measurement interval
++ **/
++static unsigned int iegbe_update_itr(struct iegbe_adapter *adapter,
++ u16 itr_setting, int packets, int bytes)
++{
++ unsigned int retval = itr_setting;
++ struct iegbe_hw *hw = &adapter->hw;
+
+- adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+- adapter->tpt_old = adapter->stats.tpt;
+- adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
+- adapter->colc_old = adapter->stats.colc;
+-
+- adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
+- adapter->gorcl_old = adapter->stats.gorcl;
+- adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
+- adapter->gotcl_old = adapter->stats.gotcl;
+-
+- iegbe_update_adaptive(&adapter->hw);
+-
+- if (adapter->num_queues == 0x1 && !netif_carrier_ok(netdev)) {
+- if (E1000_DESC_UNUSED(txdr) + 0x1 < txdr->count) {
+- /* We've lost link, so the controller stops DMA,
+- * but we've got queued Tx work that's never going
+- * to get done, so reset controller to flush Tx.
+- * (Do the reset outside of interrupt context). */
+- schedule_work(&adapter->tx_timeout_task);
++ if (unlikely(hw->mac_type < iegbe_82540))
++ goto update_itr_done;
++
++ if (packets == 0)
++ goto update_itr_done;
++
++ switch (itr_setting) {
++ case lowest_latency:
++ /* jumbo frames get bulk treatment*/
++ if (bytes/packets > 8000)
++ retval = bulk_latency;
++ else if ((packets < 5) && (bytes > 512))
++ retval = low_latency;
++ break;
++ case low_latency: /* 50 usec aka 20000 ints/s */
++ if (bytes > 10000) {
++ /* jumbo frames need bulk latency setting */
++ if (bytes/packets > 8000)
++ retval = bulk_latency;
++ else if ((packets < 10) || ((bytes/packets) > 1200))
++ retval = bulk_latency;
++ else if ((packets > 35))
++ retval = lowest_latency;
++ } else if (bytes/packets > 2000)
++ retval = bulk_latency;
++ else if (packets <= 2 && bytes < 512)
++ retval = lowest_latency;
++ break;
++ case bulk_latency: /* 250 usec aka 4000 ints/s */
++ if (bytes > 25000) {
++ if (packets > 35)
++ retval = low_latency;
++ } else if (bytes < 6000) {
++ retval = low_latency;
+ }
++ break;
+ }
+
+- /* Dynamic mode for Interrupt Throttle Rate (ITR) */
+- if (adapter->hw.mac_type >= iegbe_82540 && adapter->itr == 0x1) {
+- /* Symmetric Tx/Rx gets a reduced ITR=2000; Total
+- * asymmetrical Tx or Rx gets ITR=8000; everyone
+- * else is between 2000-8000. */
+- uint32_t goc = (adapter->gotcl + adapter->gorcl) / 0x2710;
+- uint32_t dif = (adapter->gotcl > adapter->gorcl ?
+- adapter->gotcl - adapter->gorcl :
+- adapter->gorcl - adapter->gotcl) / 0x2710;
+- uint32_t itr = goc > 0 ? (dif * 0x1770 / goc + 0x7d0) : 0x1f40;
+- E1000_WRITE_REG(&adapter->hw, ITR, 0x3b9aca00 / (itr * 0x100));
+- }
++update_itr_done:
++ return retval;
++}
+
+- /* Cause software interrupt to ensure rx ring is cleaned */
+- E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
++static void iegbe_set_itr(struct iegbe_adapter *adapter)
++{
++ struct iegbe_hw *hw = &adapter->hw;
++ u16 current_itr;
++ u32 new_itr = adapter->itr;
+
+- /* Force detection of hung controller every watchdog period */
+- adapter->detect_tx_hung = TRUE;
++ if (unlikely(hw->mac_type < iegbe_82540))
++ return;
+
+- /* With 82571 controllers, LAA may be overwritten due to controller
+- * reset from the other port. Set the appropriate LAA in RAR[0] */
+- if (adapter->hw.mac_type == iegbe_82571 && adapter->hw.laa_is_present) {
+- iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
+- }
+- /* Reset the timer */
+- mod_timer(&adapter->watchdog_timer, jiffies + 0x2 * HZ);
++ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
++ if (unlikely(adapter->link_speed != SPEED_1000)) {
++ current_itr = 0;
++ new_itr = 4000;
++ goto set_itr_now;
++ }
++
++ adapter->tx_itr = iegbe_update_itr(adapter,
++ adapter->tx_itr,
++ adapter->total_tx_packets,
++ adapter->total_tx_bytes);
++ /* conservative mode (itr 3) eliminates the lowest_latency setting */
++ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
++ adapter->tx_itr = low_latency;
++
++ adapter->rx_itr = iegbe_update_itr(adapter,
++ adapter->rx_itr,
++ adapter->total_rx_packets,
++ adapter->total_rx_bytes);
++ /* conservative mode (itr 3) eliminates the lowest_latency setting */
++ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
++ adapter->rx_itr = low_latency;
++
++ current_itr = max(adapter->rx_itr, adapter->tx_itr);
++
++ switch (current_itr) {
++ /* counts and packets in update_itr are dependent on these numbers */
++ case lowest_latency:
++ new_itr = 70000;
++ break;
++ case low_latency:
++ new_itr = 20000; /* aka hwitr = ~200 */
++ break;
++ case bulk_latency:
++ new_itr = 4000;
++ break;
++ default:
++ break;
++ }
++
++set_itr_now:
++ if (new_itr != adapter->itr) {
++ /* this attempts to bias the interrupt rate towards Bulk
++ * by adding intermediate steps when interrupt rate is
++ * increasing */
++ new_itr = new_itr > adapter->itr ?
++ min(adapter->itr + (new_itr >> 2), new_itr) :
++ new_itr;
++ adapter->itr = new_itr;
++ E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (new_itr * 256));
++ }
++
++ return;
+ }
+
+ #define E1000_TX_FLAGS_CSUM 0x00000001
+@@ -2673,55 +2641,48 @@ iegbe_watchdog(unsigned long data)
+ #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
+ #define E1000_TX_FLAGS_VLAN_SHIFT 16
+
+-static inline int
+-iegbe_tso(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
+- struct sk_buff *skb)
++static int iegbe_tso(struct iegbe_adapter *adapter,
++ struct iegbe_tx_ring *tx_ring, struct sk_buff *skb)
+ {
+-#ifdef NETIF_F_TSO
+ struct iegbe_context_desc *context_desc;
++ struct iegbe_buffer *buffer_info;
+ unsigned int i;
+- uint32_t cmd_length = 0;
+- uint16_t ipcse = 0, tucse, mss;
+- uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
++ u32 cmd_length = 0;
++ u16 ipcse = 0, tucse, mss;
++ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+ int err;
+
+ if (skb_is_gso(skb)) {
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+- if (err) {
++ if (err)
+ return err;
+ }
+- }
+
+- hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 0x2));
++ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ mss = skb_shinfo(skb)->gso_size;
+ if (skb->protocol == htons(ETH_P_IP)) {
+- skb->nh.iph->tot_len = 0;
+- skb->nh.iph->check = 0;
+- skb->h.th->check =
+- ~csum_tcpudp_magic(skb->nh.iph->saddr,
+- skb->nh.iph->daddr,
+- 0,
+- IPPROTO_TCP,
+- 0);
++ struct iphdr *iph = ip_hdr(skb);
++ iph->tot_len = 0;
++ iph->check = 0;
++ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
++ iph->daddr, 0,
++ IPPROTO_TCP,
++ 0);
+ cmd_length = E1000_TXD_CMD_IP;
+- ipcse = skb->h.raw - skb->data - 0x1;
+-#ifdef NETIF_F_TSO_IPV6
+- } else if (skb->protocol == ntohs(ETH_P_IPV6)) {
+- skb->nh.ipv6h->payload_len = 0;
+- skb->h.th->check =
+- ~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
+- &skb->nh.ipv6h->daddr,
+- 0,
+- IPPROTO_TCP,
+- 0);
++ ipcse = skb_transport_offset(skb) - 1;
++ } else if (skb->protocol == htons(ETH_P_IPV6)) {
++ ipv6_hdr(skb)->payload_len = 0;
++ tcp_hdr(skb)->check =
++ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
++ &ipv6_hdr(skb)->daddr,
++ 0, IPPROTO_TCP, 0);
+ ipcse = 0;
+-#endif
+ }
+- ipcss = skb->nh.raw - skb->data;
+- ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
+- tucss = skb->h.raw - skb->data;
+- tucso = (void *)&(skb->h.th->check) - (void *)skb->data;
++ ipcss = skb_network_offset(skb);
++ ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
++ tucss = skb_transport_offset(skb);
++ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+ tucse = 0;
+
+ cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+@@ -2729,6 +2690,7 @@ iegbe_tso(struct iegbe_adapter *adapter,
+
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
++ buffer_info = &tx_ring->buffer_info[i];
+
+ context_desc->lower_setup.ip_fields.ipcss = ipcss;
+ context_desc->lower_setup.ip_fields.ipcso = ipcso;
+@@ -2740,205 +2702,218 @@ iegbe_tso(struct iegbe_adapter *adapter,
+ context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+- if (++i == tx_ring->count) { i = 0; }
++ buffer_info->time_stamp = jiffies;
++ buffer_info->next_to_watch = i;
++
++ if (++i == tx_ring->count) i = 0;
+ tx_ring->next_to_use = i;
+
+- return TRUE;
++ return true;
+ }
+-#endif
+-
+- return FALSE;
++ return false;
+ }
+
+-static inline boolean_t
+-iegbe_tx_csum(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
+- struct sk_buff *skb)
++static bool iegbe_tx_csum(struct iegbe_adapter *adapter,
++ struct iegbe_tx_ring *tx_ring, struct sk_buff *skb)
+ {
+ struct iegbe_context_desc *context_desc;
++ struct iegbe_buffer *buffer_info;
+ unsigned int i;
+- uint8_t css;
++ u8 css;
+
+- if (likely(skb->ip_summed == CHECKSUM_HW)) {
+- css = skb->h.raw - skb->data;
++ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
++ css = skb_transport_offset(skb);
+
+- i = tx_ring->next_to_use;
+- context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
++ i = tx_ring->next_to_use;
++ buffer_info = &tx_ring->buffer_info[i];
++ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+
++ context_desc->lower_setup.ip_config = 0;
+ context_desc->upper_setup.tcp_fields.tucss = css;
+- context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
++ context_desc->upper_setup.tcp_fields.tucso =
++ css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucse = 0;
+ context_desc->tcp_seg_setup.data = 0;
+ context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
+
+- if (unlikely(++i == tx_ring->count)) { i = 0; }
++ buffer_info->time_stamp = jiffies;
++ buffer_info->next_to_watch = i;
++
++ if (unlikely(++i == tx_ring->count)) i = 0;
+ tx_ring->next_to_use = i;
+
+- return TRUE;
++ return true;
+ }
+
+- return FALSE;
++ return false;
+ }
+
+-#define E1000_MAX_TXD_PWR 12
+-#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
++#define E1000_MAX_TXD_PWR 12
++#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
+
+-static inline int
+-iegbe_tx_map(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
+- struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
+- unsigned int nr_frags, unsigned int mss)
++static int iegbe_tx_map(struct iegbe_adapter *adapter,
++ struct iegbe_tx_ring *tx_ring,
++ struct sk_buff *skb, unsigned int first,
++ unsigned int max_per_txd, unsigned int nr_frags,
++ unsigned int mss)
+ {
+- struct iegbe_buffer *buffer_info;
+- unsigned int len = skb->len;
++ struct iegbe_hw *hw = &adapter->hw;
++ struct iegbe_buffer *buffer_info;
++ unsigned int len = skb->len;
+ unsigned int offset = 0, size, count = 0, i;
+-#ifdef MAX_SKB_FRAGS
+- unsigned int f;
+- len -= skb->data_len;
+-#endif
++ unsigned int f;
++ len -= skb->data_len;
+
+- i = tx_ring->next_to_use;
++ i = tx_ring->next_to_use;
++
++ while(len) {
++ buffer_info = &tx_ring->buffer_info[i];
++ size = min(len, max_per_txd);
++ /* Workaround for Controller erratum --
++ * descriptor for non-tso packet in a linear SKB that follows a
++ * tso gets written back prematurely before the data is fully
++ * DMA'd to the controller */
++ if (!skb->data_len && tx_ring->last_tx_tso &&
++ !skb_is_gso(skb)) {
++ tx_ring->last_tx_tso = 0;
++ size -= 4;
++ }
+
+- while(len) {
+- buffer_info = &tx_ring->buffer_info[i];
+- size = min(len, max_per_txd);
+-#ifdef NETIF_F_TSO
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+- if(unlikely(mss && !nr_frags && size == len && size > 0x8)) {
+- size -= 0x4;
++ if (unlikely(mss && !nr_frags && size == len && size > 8))
++ size -= 4;
++ /* work-around for errata 10 and it applies
++ * to all controllers in PCI-X mode
++ * The fix is to make sure that the first descriptor of a
++ * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
++ */
++ if (unlikely((hw->bus_type == iegbe_bus_type_pcix) &&
++ (size > 2015) && count == 0))
++ size = 2015;
++
++ /* Workaround for potential 82544 hang in PCI-X. Avoid
++ * terminating buffers within evenly-aligned dwords. */
++ if(unlikely(adapter->pcix_82544 &&
++ !((unsigned long)(skb->data + offset + size - 1) & 4) &&
++ size > 4))
++ size -= 4;
++
++ buffer_info->length = size;
++ buffer_info->dma =
++ pci_map_single(adapter->pdev,
++ skb->data + offset,
++ size,
++ PCI_DMA_TODEVICE);
++ buffer_info->time_stamp = jiffies;
++ buffer_info->next_to_watch = i;
++
++ len -= size;
++ offset += size;
++ count++;
++ if (unlikely(++i == tx_ring->count)) i = 0;
++ }
++
++ for (f = 0; f < nr_frags; f++) {
++ struct skb_frag_struct *frag;
++
++ frag = &skb_shinfo(skb)->frags[f];
++ len = frag->size;
++ offset = frag->page_offset;
++
++ while(len) {
++ buffer_info = &tx_ring->buffer_info[i];
++ size = min(len, max_per_txd);
++ /* Workaround for premature desc write-backs
++ * in TSO mode. Append 4-byte sentinel desc */
++ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
++ size -= 4;
++ /* Workaround for potential 82544 hang in PCI-X.
++ * Avoid terminating buffers within evenly-aligned
++ * dwords. */
++ if(unlikely(adapter->pcix_82544 &&
++ !((unsigned long)(frag->page+offset+size-1) & 4) &&
++ size > 4))
++ size -= 4;
++
++ buffer_info->length = size;
++ buffer_info->dma =
++ pci_map_page(adapter->pdev,
++ frag->page,
++ offset,
++ size,
++ PCI_DMA_TODEVICE);
++ buffer_info->time_stamp = jiffies;
++ buffer_info->next_to_watch = i;
++
++ len -= size;
++ offset += size;
++ count++;
++ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+-#endif
+- /* work-around for errata 10 and it applies
+- * to all controllers in PCI-X mode
+- * The fix is to make sure that the first descriptor of a
+- * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
+- */
+- if(unlikely((adapter->hw.bus_type == iegbe_bus_type_pcix) &&
+- (size > 0x7df) && count == 0)) {
+- size = 0x7df;
+- }
+- /* Workaround for potential 82544 hang in PCI-X. Avoid
+- * terminating buffers within evenly-aligned dwords. */
+- if(unlikely(adapter->pcix_82544 &&
+- !((unsigned long)(skb->data + offset + size - 0x8) & 0x4) &&
+- size > 0x4)) {
+- size -= 0x4;
+- }
+- buffer_info->length = size;
+- buffer_info->dma =
+- pci_map_single(adapter->pdev,
+- skb->data + offset,
+- size,
+- PCI_DMA_TODEVICE);
+- buffer_info->time_stamp = jiffies;
+-
+- len -= size;
+- offset += size;
+- count++;
+- if(unlikely(++i == tx_ring->count)) { i = 0; }
+- }
+-
+-#ifdef MAX_SKB_FRAGS
+- for(f = 0; f < nr_frags; f++) {
+- struct skb_frag_struct *frag;
+-
+- frag = &skb_shinfo(skb)->frags[f];
+- len = frag->size;
+- offset = frag->page_offset;
+-
+- while(len) {
+- buffer_info = &tx_ring->buffer_info[i];
+- size = min(len, max_per_txd);
+-#ifdef NETIF_F_TSO
+- /* Workaround for premature desc write-backs
+- * in TSO mode. Append 4-byte sentinel desc */
+- if(unlikely(mss && f == (nr_frags-0x1) &&
+- size == len && size > 0x8)) {
+- size -= 0x4;
+- }
+-#endif
+- /* Workaround for potential 82544 hang in PCI-X.
+- * Avoid terminating buffers within evenly-aligned
+- * dwords. */
+- if(unlikely(adapter->pcix_82544 &&
+- !((unsigned long)(frag->page+offset+size-0x1) & 0x4) &&
+- size > 0x4)) {
+- size -= 0x4;
+- }
+- buffer_info->length = size;
+- buffer_info->dma =
+- pci_map_page(adapter->pdev,
+- frag->page,
+- offset,
+- size,
+- PCI_DMA_TODEVICE);
+- buffer_info->time_stamp = jiffies;
+-
+- len -= size;
+- offset += size;
+- count++;
+- if(unlikely(++i == tx_ring->count)) { i = 0; }
+- }
+- }
+-#endif
++ }
+
+- i = (i == 0) ? tx_ring->count - 0x1 : i - 0x1;
+- tx_ring->buffer_info[i].skb = skb;
+- tx_ring->buffer_info[first].next_to_watch = i;
++ i = (i == 0) ? tx_ring->count - 1 : i - 1;
++ tx_ring->buffer_info[i].skb = skb;
++ tx_ring->buffer_info[first].next_to_watch = i;
+
+- return count;
++ return count;
+ }
+
+-static inline void
+-iegbe_tx_queue(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
+- int tx_flags, int count)
++static void iegbe_tx_queue(struct iegbe_adapter *adapter,
++ struct iegbe_tx_ring *tx_ring, int tx_flags,
++ int count)
+ {
++ struct iegbe_hw *hw = &adapter->hw;
+ struct iegbe_tx_desc *tx_desc = NULL;
+ struct iegbe_buffer *buffer_info;
+- uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
++ u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+ unsigned int i;
+
+- if(likely(tx_flags & E1000_TX_FLAGS_TSO)) {
++ if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
+ E1000_TXD_CMD_TSE;
+- txd_upper |= E1000_TXD_POPTS_TXSM << 0x8;
++ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+- if(likely(tx_flags & E1000_TX_FLAGS_IPV4)) {
+- txd_upper |= E1000_TXD_POPTS_IXSM << 0x8;
+- }
++ if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
++ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
+ }
+
+- if(likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
++ if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+- txd_upper |= E1000_TXD_POPTS_TXSM << 0x8;
+- }
+-
+- if(unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
+- txd_lower |= E1000_TXD_CMD_VLE;
+- txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
++ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+- i = tx_ring->next_to_use;
++ if(unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
++ txd_lower |= E1000_TXD_CMD_VLE;
++ txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
++ }
+
+- while(count--) {
+- buffer_info = &tx_ring->buffer_info[i];
+- tx_desc = E1000_TX_DESC(*tx_ring, i);
+- tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+- tx_desc->lower.data =
+- cpu_to_le32(txd_lower | buffer_info->length);
+- tx_desc->upper.data = cpu_to_le32(txd_upper);
+- if(unlikely(++i == tx_ring->count)) { i = 0; }
+- }
+- if(tx_desc != NULL) {
+- tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+- }
+- /* Force memory writes to complete before letting h/w
+- * know there are new descriptors to fetch. (Only
+- * applicable for weak-ordered memory model archs,
+- * such as IA-64). */
+- wmb();
++ i = tx_ring->next_to_use;
+
+- tx_ring->next_to_use = i;
+- writel(i, adapter->hw.hw_addr + tx_ring->tdt);
++ while(count--) {
++ buffer_info = &tx_ring->buffer_info[i];
++ tx_desc = E1000_TX_DESC(*tx_ring, i);
++ tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
++ tx_desc->lower.data =
++ cpu_to_le32(txd_lower | buffer_info->length);
++ tx_desc->upper.data = cpu_to_le32(txd_upper);
++ if (unlikely(++i == tx_ring->count)) i = 0;
++ }
++
++ tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
++
++ /* Force memory writes to complete before letting h/w
++ * know there are new descriptors to fetch. (Only
++ * applicable for weak-ordered memory model archs,
++ * such as IA-64). */
++ wmb();
++
++ tx_ring->next_to_use = i;
++ writel(i, hw->hw_addr + tx_ring->tdt);
++ /* we need this if more than one processor can write to our tail
++ * at a time, it syncronizes IO on IA64/Altix systems */
++ mmiowb();
+ }
+
+ /**
+@@ -2950,113 +2925,132 @@ iegbe_tx_queue(struct iegbe_adapter *ada
+ * to the beginning of the Tx FIFO.
+ **/
+
+-static inline int
+-iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter, struct sk_buff *skb)
++#define E1000_FIFO_HDR 0x10
++#define E1000_82547_PAD_LEN 0x3E0
++static int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
++ struct sk_buff *skb)
+ {
+- uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
+- uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
++ u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
++ u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
+
+- E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
++ skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
+
+- if(adapter->link_duplex != HALF_DUPLEX) {
+- goto no_fifo_stall_required;
+- }
+- if(atomic_read(&adapter->tx_fifo_stall)) {
+- return 1;
++ if (adapter->link_duplex != HALF_DUPLEX)
++ goto no_fifo_stall_required;
++
++ if (atomic_read(&adapter->tx_fifo_stall))
++ return 1;
++
++ if(skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
++ atomic_set(&adapter->tx_fifo_stall, 1);
++ return 1;
+ }
+- if(skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
+- atomic_set(&adapter->tx_fifo_stall, 0x1);
+- return 1;
+- }
+
+ no_fifo_stall_required:
+- adapter->tx_fifo_head += skb_fifo_len;
+- if(adapter->tx_fifo_head >= adapter->tx_fifo_size) {
+- adapter->tx_fifo_head -= adapter->tx_fifo_size;
+- }
++ adapter->tx_fifo_head += skb_fifo_len;
++ if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
++ adapter->tx_fifo_head -= adapter->tx_fifo_size;
+ return 0;
+ }
+
+-static inline int
+-iegbe_transfer_dhcp_info(struct iegbe_adapter *adapter, struct sk_buff *skb)
++#define MINIMUM_DHCP_PACKET_SIZE 282
++static int iegbe_transfer_dhcp_info(struct iegbe_adapter *adapter,
++ struct sk_buff *skb)
+ {
+ struct iegbe_hw *hw = &adapter->hw;
+- uint16_t length, offset;
+-#ifdef NETIF_F_HW_VLAN_TX
+- if(vlan_tx_tag_present(skb)) {
+- if(!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
+- ( adapter->hw.mng_cookie.status &
+- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) ) {
++ u16 length, offset;
++ if (vlan_tx_tag_present(skb)) {
++ if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) &&
++ ( hw->mng_cookie.status &
++ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
+ return 0;
+ }
+- }
+-#endif
+- if(htons(ETH_P_IP) == skb->protocol) {
+- const struct iphdr *ip = skb->nh.iph;
+- if(IPPROTO_UDP == ip->protocol) {
+- struct udphdr *udp = (struct udphdr *)(skb->h.uh);
+- if(ntohs(udp->dest) == 0x43) { /* 0x43 = 67 */
+- offset = (uint8_t *)udp + 0x8 - skb->data;
+- length = skb->len - offset;
+-
+- return iegbe_mng_write_dhcp_info(hw,
+- (uint8_t *)udp + 0x8, length);
+- }
+- }
+- } else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
+- struct ethhdr *eth = (struct ethhdr *) skb->data;
+- if((htons(ETH_P_IP) == eth->h_proto)) {
++ if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
++ struct ethhdr *eth = (struct ethhdr *)skb->data;
++ if ((htons(ETH_P_IP) == eth->h_proto)) {
+ const struct iphdr *ip =
+- (struct iphdr *)((uint8_t *)skb->data+0xe);
+- if(IPPROTO_UDP == ip->protocol) {
++ (struct iphdr *)((u8 *)skb->data+14);
++ if (IPPROTO_UDP == ip->protocol) {
+ struct udphdr *udp =
+- (struct udphdr *)((uint8_t *)ip +
+- (ip->ihl << 0x2));
+- if(ntohs(udp->dest) == 0x43) {
+- offset = (uint8_t *)udp + 0x8 - skb->data;
++ (struct udphdr *)((u8 *)ip +
++ (ip->ihl << 2));
++ if (ntohs(udp->dest) == 67) {
++ offset = (u8 *)udp + 8 - skb->data;
+ length = skb->len - offset;
+
+ return iegbe_mng_write_dhcp_info(hw,
+- (uint8_t *)udp + 0x8,
++ (u8 *)udp + 8,
+ length);
+- }
++ }
+ }
+ }
+ }
+ return 0;
+ }
+
+-static int
+-iegbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
++static int __iegbe_maybe_stop_tx(struct net_device *netdev, int size)
++{
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_tx_ring *tx_ring = adapter->tx_ring;
++
++ netif_stop_queue(netdev);
++ /* Herbert's original patch had:
++ * smp_mb__after_netif_stop_queue();
++ * but since that doesn't exist yet, just open code it. */
++ smp_mb();
++
++ /* We need to check again in a case another CPU has just
++ * made room available. */
++ if (likely(E1000_DESC_UNUSED(tx_ring) < size))
++ return -EBUSY;
++
++ /* A reprieve! */
++ netif_start_queue(netdev);
++ ++adapter->restart_queue;
++ return 0;
++}
++
++static int iegbe_maybe_stop_tx(struct net_device *netdev,
++ struct iegbe_tx_ring *tx_ring, int size)
++{
++ if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
++ return 0;
++ return __iegbe_maybe_stop_tx(netdev, size);
++}
++
++#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
++static int iegbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+ {
+ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_hw *hw = &adapter->hw;
+ struct iegbe_tx_ring *tx_ring;
+ unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
+ unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
+ unsigned int tx_flags = 0;
+- unsigned int len = skb->len;
++ unsigned int len = skb->len - skb->data_len;
+ unsigned long flags = 0;
+- unsigned int nr_frags = 0;
+- unsigned int mss = 0;
++ unsigned int nr_frags;
++ unsigned int mss;
+ int count = 0;
+- int tso;
+-#ifdef MAX_SKB_FRAGS
++ int tso;
+ unsigned int f;
+- len -= skb->data_len;
+-#endif
+
+-#ifdef CONFIG_E1000_MQ
+- tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
+-#else
++ /* This goes back to the question of how to logically map a tx queue
++ * to a flow. Right now, performance is impacted slightly negatively
++ * if using multiple tx queues. If the stack breaks away from a
++ * single qdisc implementation, we can look at this again. */
+ tx_ring = adapter->tx_ring;
+-#endif
+
+ if (unlikely(skb->len <= 0)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+-#ifdef NETIF_F_TSO
++ /* 82571 and newer doesn't need the workaround that limited descriptor
++ * length to 4kB */
++ if (hw->mac_type >= iegbe_82571)
++ max_per_txd = 8192;
++
+ mss = skb_shinfo(skb)->gso_size;
+ /* The controller does a simple calculation to
+ * make sure there is enough room in the FIFO before
+@@ -3064,164 +3058,150 @@ iegbe_xmit_frame(struct sk_buff *skb, st
+ * 4 = ceil(buffer len/mss). To make sure we don't
+ * overrun the FIFO, adjust the max buffer len if mss
+ * drops. */
+- if(mss) {
+- max_per_txd = min(mss << 0x2, max_per_txd);
+- max_txd_pwr = fls(max_per_txd) - 0x1;
++ if (mss) {
++ u8 hdr_len;
++ max_per_txd = min(mss << 2, max_per_txd);
++ max_txd_pwr = fls(max_per_txd) - 1;
++
++ /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
++ * points to just header, pull a few bytes of payload from
++ * frags into skb->data */
++ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
++ if (skb->data_len && hdr_len == len) {
++ switch (hw->mac_type) {
++ case iegbe_82544:
++ /* Make sure we have room to chop off 4 bytes,
++ * and that the end alignment will work out to
++ * this hardware's requirements
++ * NOTE: this is a TSO only workaround
++ * if end byte alignment not correct move us
++ * into the next dword */
++ break;
++ /* fall through */
++ case iegbe_82571:
++ case iegbe_82572:
++ case iegbe_82573:
++ break;
++ default:
++ /* do nothing */
++ break;
++ }
++ }
+ }
+
+- if((mss) || (skb->ip_summed == CHECKSUM_HW)) {
++ /* reserve a descriptor for the offload context */
++ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
+ count++;
+- }
+ count++;
+-#else
+- if(skb->ip_summed == CHECKSUM_HW) {
++
++ /* Controller Erratum workaround */
++ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
+ count++;
+- {
+-#endif
++
+ count += TXD_USE_COUNT(len, max_txd_pwr);
+
+- if(adapter->pcix_82544) {
++ if (adapter->pcix_82544)
+ count++;
+- }
++
+ /* work-around for errata 10 and it applies to all controllers
+ * in PCI-X mode, so add one more descriptor to the count
+ */
+- if(unlikely((adapter->hw.bus_type == iegbe_bus_type_pcix) &&
+- (len > 0x7df))) {
++ if (unlikely((hw->bus_type == iegbe_bus_type_pcix) &&
++ (len > 2015)))
+ count++;
+- }
+-#ifdef MAX_SKB_FRAGS
++
+ nr_frags = skb_shinfo(skb)->nr_frags;
+- for(f = 0; f < nr_frags; f++)
++ for (f = 0; f < nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
+ max_txd_pwr);
+- if(adapter->pcix_82544) {
++ if (adapter->pcix_82544)
+ count += nr_frags;
+- }
+-#ifdef NETIF_F_TSO
+- /* TSO Workaround for 82571/2 Controllers -- if skb->data
+- * points to just header, pull a few bytes of payload from
+- * frags into skb->data */
+- if (skb_is_gso(skb)) {
+- uint8_t hdr_len;
+- hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 0x2));
+- if (skb->data_len && (hdr_len < (skb->len - skb->data_len)) &&
+- (adapter->hw.mac_type == iegbe_82571 ||
+- adapter->hw.mac_type == iegbe_82572)) {
+- unsigned int pull_size;
+- pull_size = min((unsigned int)0x4, skb->data_len);
+- if (!__pskb_pull_tail(skb, pull_size)) {
+- printk(KERN_ERR "__pskb_pull_tail failed.\n");
+- dev_kfree_skb_any(skb);
+- return -EFAULT;
+- }
+- }
+- }
+-#endif
+-#endif
+
+- if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == iegbe_82573) ) {
++
++ if (hw->tx_pkt_filtering &&
++ (hw->mac_type == iegbe_82573))
+ iegbe_transfer_dhcp_info(adapter, skb);
+- }
+-#ifdef NETIF_F_LLTX
+- local_irq_save(flags);
+- if (!spin_trylock(&tx_ring->tx_lock)) {
++
++ if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags))
+ /* Collision - tell upper layer to requeue */
+- local_irq_restore(flags);
+ return NETDEV_TX_LOCKED;
+- }
+-#else
+- spin_lock_irqsave(&tx_ring->tx_lock, flags);
+-#endif
+
+ /* need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time */
+- if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 0x2)) {
+- netif_stop_queue(netdev);
++ if (unlikely(iegbe_maybe_stop_tx(netdev, tx_ring, count + 2))) {
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+
+- if(unlikely(adapter->hw.mac_type == iegbe_82547)) {
+- if(unlikely(iegbe_82547_fifo_workaround(adapter, skb))) {
++ if (unlikely(hw->mac_type == iegbe_82547)) {
++ if (unlikely(iegbe_82547_fifo_workaround(adapter, skb))) {
+ netif_stop_queue(netdev);
+- mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
++ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+ }
+
+-#ifndef NETIF_F_LLTX
+- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+-#endif
+-
+-#ifdef NETIF_F_HW_VLAN_TX
+- if(unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
++ if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+ tx_flags |= E1000_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
+ }
+-#endif
+
+ first = tx_ring->next_to_use;
+
+ tso = iegbe_tso(adapter, tx_ring, skb);
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+-#ifdef NETIF_F_LLTX
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+-#endif
+ return NETDEV_TX_OK;
+ }
+
+- if (likely(tso)) {
++ if (likely(tso)) {
++ tx_ring->last_tx_tso = 1;
+ tx_flags |= E1000_TX_FLAGS_TSO;
+- } else if (likely(iegbe_tx_csum(adapter, tx_ring, skb))) {
++ } else if (likely(iegbe_tx_csum(adapter, tx_ring, skb)))
+ tx_flags |= E1000_TX_FLAGS_CSUM;
+- }
++
+ /* Old method was to assume IPv4 packet by default if TSO was enabled.
+ * 82571 hardware supports TSO capabilities for IPv6 as well...
+ * no longer assume, we must. */
+- if (likely(skb->protocol == ntohs(ETH_P_IP))) {
++ if (likely(skb->protocol == htons(ETH_P_IP)))
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+- }
++
+ iegbe_tx_queue(adapter, tx_ring, tx_flags,
+ iegbe_tx_map(adapter, tx_ring, skb, first,
+ max_per_txd, nr_frags, mss));
+
+ netdev->trans_start = jiffies;
+
+-#ifdef NETIF_F_LLTX
+ /* Make sure there is space in the ring for the next send. */
+- if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 0x2)) {
+- netif_stop_queue(netdev);
+- }
+- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+-#endif
++ iegbe_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
+
++ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+ return NETDEV_TX_OK;
+ }
+
++
+ /**
+ * iegbe_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+
+-static void
+-iegbe_tx_timeout(struct net_device *netdev)
++static void iegbe_tx_timeout(struct net_device *netdev)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
+
+- /* Do the reset outside of interrupt context */
+- schedule_work(&adapter->tx_timeout_task);
++ /* Do the reset outside of interrupt context */
++ adapter->tx_timeout_count++;
++ schedule_work(&adapter->reset_task);
+ }
+
+-static void
+-iegbe_tx_timeout_task(struct net_device *netdev)
++static void iegbe_reset_task(struct work_struct *work)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_adapter *adapter =
++ container_of(work, struct iegbe_adapter, reset_task);
+
+- iegbe_down(adapter);
+- iegbe_up(adapter);
++ iegbe_reinit_locked(adapter);
+ }
+
+ /**
+@@ -3232,13 +3212,12 @@ iegbe_tx_timeout_task(struct net_device
+ * The statistics are actually updated from the timer callback.
+ **/
+
+-static struct net_device_stats *
+-iegbe_get_stats(struct net_device *netdev)
++static struct net_device_stats *iegbe_get_stats(struct net_device *netdev)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
+
+- iegbe_update_stats(adapter);
+- return &adapter->net_stats;
++ /* only return the current stats */
++ return &adapter->net_stats;
+ }
+
+ /**
+@@ -3249,67 +3228,55 @@ iegbe_get_stats(struct net_device *netde
+ * Returns 0 on success, negative on failure
+ **/
+
+-static int
+-iegbe_change_mtu(struct net_device *netdev, int new_mtu)
++static int iegbe_change_mtu(struct net_device *netdev, int new_mtu)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_hw *hw = &adapter->hw;
++ int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+
+- if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+- (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+- DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
+- return -EINVAL;
+- }
++ if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
++ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
++ DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
++ return -EINVAL;
++ }
+
++ /* Adapter-specific max frame size limits. */
++ switch (hw->mac_type) {
++ case iegbe_undefined ... iegbe_82542_rev2_1:
++ if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
++ DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
++ return -EINVAL;
++ }
++ break;
++ case iegbe_82571:
++ case iegbe_82572:
+ #define MAX_STD_JUMBO_FRAME_SIZE 9234
+- /* might want this to be bigger enum check... */
+- /* 82571 controllers limit jumbo frame size to 10500 bytes */
+- if ((adapter->hw.mac_type == iegbe_82571 ||
+- adapter->hw.mac_type == iegbe_82572) &&
+- max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+- DPRINTK(PROBE, ERR, "MTU > 9216 bytes not supported "
+- "on 82571 and 82572 controllers.\n");
+- return -EINVAL;
+- }
+-
+- if(adapter->hw.mac_type == iegbe_82573 &&
+- max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+- DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
+- "on 82573\n");
+- return -EINVAL;
+- }
+-
+- if(adapter->hw.mac_type > iegbe_82547_rev_2) {
+- adapter->rx_buffer_len = max_frame;
+- E1000_ROUNDUP(adapter->rx_buffer_len, 0x1024);
+- } else {
+- if(unlikely((adapter->hw.mac_type < iegbe_82543) &&
+- (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) {
+- DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
+- "on 82542\n");
+- return -EINVAL;
+-
+- } else {
+- if(max_frame <= E1000_RXBUFFER_2048) {
+- adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+- } else if(max_frame <= E1000_RXBUFFER_4096) {
+- adapter->rx_buffer_len = E1000_RXBUFFER_4096;
+- } else if(max_frame <= E1000_RXBUFFER_8192) {
+- adapter->rx_buffer_len = E1000_RXBUFFER_8192;
+- } else if(max_frame <= E1000_RXBUFFER_16384) {
+- adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+- }
++ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
++ DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
++ return -EINVAL;
+ }
++ break;
++ default:
++ break;
+ }
++ if (max_frame <= E1000_RXBUFFER_256)
++ adapter->rx_buffer_len = E1000_RXBUFFER_256;
++ else if (max_frame <= E1000_RXBUFFER_2048)
++ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
++ else if (max_frame <= E1000_RXBUFFER_4096)
++ adapter->rx_buffer_len = E1000_RXBUFFER_4096;
++ else if (max_frame <= E1000_RXBUFFER_8192)
++ adapter->rx_buffer_len = E1000_RXBUFFER_8192;
++ else if (max_frame <= E1000_RXBUFFER_16384)
++ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+
+- netdev->mtu = new_mtu;
++ /* adjust allocation if LPE protects us, and we aren't using SBP */
+
+- if(netif_running(netdev)) {
+- iegbe_down(adapter);
+- iegbe_up(adapter);
+- }
++ netdev->mtu = new_mtu;
++ hw->max_frame_size = max_frame;
+
+- adapter->hw.max_frame_size = max_frame;
++ if (netif_running(netdev))
++ iegbe_reinit_locked(adapter);
+
+ return 0;
+ }
+@@ -3319,224 +3286,189 @@ iegbe_change_mtu(struct net_device *netd
+ * @adapter: board private structure
+ **/
+
+-void
+-iegbe_update_stats(struct iegbe_adapter *adapter)
++void iegbe_update_stats(struct iegbe_adapter *adapter)
+ {
+- struct iegbe_hw *hw = &adapter->hw;
+- unsigned long flags = 0;
+- uint16_t phy_tmp;
++ struct iegbe_hw *hw = &adapter->hw;
++ unsigned long flags = 0x0;
++ uint16_t phy_tmp;
+
+ #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+- spin_lock_irqsave(&adapter->stats_lock, flags);
++ spin_lock_irqsave(&adapter->stats_lock, flags);
+
+- /* these counters are modified from iegbe_adjust_tbi_stats,
+- * called from the interrupt context, so they must only
+- * be written while holding adapter->stats_lock
+- */
++ /* these counters are modified from iegbe_adjust_tbi_stats,
++ * called from the interrupt context, so they must only
++ * be written while holding adapter->stats_lock
++ */
+
+- adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
+- adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
+- adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
+- adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
+- adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
+- adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
+- adapter->stats.roc += E1000_READ_REG(hw, ROC);
+- adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
+- adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
+- adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
+- adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
+- adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
+- adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
+-
+- adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
+- adapter->stats.mpc += E1000_READ_REG(hw, MPC);
+- adapter->stats.scc += E1000_READ_REG(hw, SCC);
+- adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
+- adapter->stats.mcc += E1000_READ_REG(hw, MCC);
+- adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
+- adapter->stats.dc += E1000_READ_REG(hw, DC);
+- adapter->stats.sec += E1000_READ_REG(hw, SEC);
+- adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
+- adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
+- adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
+- adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
+- adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
+- adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
+- adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
+- adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
+- adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
+- adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
+- adapter->stats.ruc += E1000_READ_REG(hw, RUC);
+- adapter->stats.rfc += E1000_READ_REG(hw, RFC);
+- adapter->stats.rjc += E1000_READ_REG(hw, RJC);
+- adapter->stats.torl += E1000_READ_REG(hw, TORL);
+- adapter->stats.torh += E1000_READ_REG(hw, TORH);
+- adapter->stats.totl += E1000_READ_REG(hw, TOTL);
+- adapter->stats.toth += E1000_READ_REG(hw, TOTH);
+- adapter->stats.tpr += E1000_READ_REG(hw, TPR);
+- adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
+- adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
+- adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
+- adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
+- adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
+- adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
+- adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
+- adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
+-
+- /* used for adaptive IFS */
+-
+- hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
+- adapter->stats.tpt += hw->tx_packet_delta;
+- hw->collision_delta = E1000_READ_REG(hw, COLC);
+- adapter->stats.colc += hw->collision_delta;
+-
+- if(hw->mac_type >= iegbe_82543) {
+- adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
+- adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
+- adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
+- adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
+- adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
+- adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
+- }
+- if(hw->mac_type > iegbe_82547_rev_2) {
+- adapter->stats.iac += E1000_READ_REG(hw, IAC);
+- adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
+- adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
+- adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
+- adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
+- adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
+- adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
+- adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
+- adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+- }
+-
+- /* Fill out the OS statistics structure */
+-
+- adapter->net_stats.rx_packets = adapter->stats.gprc;
+- adapter->net_stats.tx_packets = adapter->stats.gptc;
+- adapter->net_stats.rx_bytes = adapter->stats.gorcl;
+- adapter->net_stats.tx_bytes = adapter->stats.gotcl;
+- adapter->net_stats.multicast = adapter->stats.mprc;
+- adapter->net_stats.collisions = adapter->stats.colc;
+-
+- /* Rx Errors */
+-
+- adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+- adapter->stats.crcerrs + adapter->stats.algnerrc +
+- adapter->stats.rlec + adapter->stats.mpc +
+- adapter->stats.cexterr;
+- adapter->net_stats.rx_dropped = adapter->stats.mpc;
+- adapter->net_stats.rx_length_errors = adapter->stats.rlec;
+- adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
+- adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
+- adapter->net_stats.rx_fifo_errors = adapter->stats.mpc;
+- adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+-
+- /* Tx Errors */
+-
+- adapter->net_stats.tx_errors = adapter->stats.ecol +
+- adapter->stats.latecol;
+- adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
+- adapter->net_stats.tx_window_errors = adapter->stats.latecol;
+- adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
++ adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
++ adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
++ adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
++ adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
++ adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
++ adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
++ adapter->stats.roc += E1000_READ_REG(hw, ROC);
++ adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
++ adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
++ adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
++ adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
++ adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
++ adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
++
++ adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
++ adapter->stats.mpc += E1000_READ_REG(hw, MPC);
++ adapter->stats.scc += E1000_READ_REG(hw, SCC);
++ adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
++ adapter->stats.mcc += E1000_READ_REG(hw, MCC);
++ adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
++ adapter->stats.dc += E1000_READ_REG(hw, DC);
++ adapter->stats.sec += E1000_READ_REG(hw, SEC);
++ adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
++ adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
++ adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
++ adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
++ adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
++ adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
++ adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
++ adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
++ adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
++ adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
++ adapter->stats.ruc += E1000_READ_REG(hw, RUC);
++ adapter->stats.rfc += E1000_READ_REG(hw, RFC);
++ adapter->stats.rjc += E1000_READ_REG(hw, RJC);
++ adapter->stats.torl += E1000_READ_REG(hw, TORL);
++ adapter->stats.torh += E1000_READ_REG(hw, TORH);
++ adapter->stats.totl += E1000_READ_REG(hw, TOTL);
++ adapter->stats.toth += E1000_READ_REG(hw, TOTH);
++ adapter->stats.tpr += E1000_READ_REG(hw, TPR);
++ adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
++ adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
++ adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
++ adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
++ adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
++ adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
++ adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
++ adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
++
++ /* used for adaptive IFS */
++
++ hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
++ adapter->stats.tpt += hw->tx_packet_delta;
++ hw->collision_delta = E1000_READ_REG(hw, COLC);
++ adapter->stats.colc += hw->collision_delta;
++
++ if(hw->mac_type >= iegbe_82543) {
++ adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
++ adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
++ adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
++ adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
++ adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
++ adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
++ }
++ if(hw->mac_type > iegbe_82547_rev_2) {
++ adapter->stats.iac += E1000_READ_REG(hw, IAC);
++ adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
++ adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
++ adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
++ adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
++ adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
++ adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
++ adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
++ adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
++ }
++
++ /* Fill out the OS statistics structure */
++
++ adapter->net_stats.rx_packets = adapter->stats.gprc;
++ adapter->net_stats.tx_packets = adapter->stats.gptc;
++ adapter->net_stats.rx_bytes = adapter->stats.gorcl;
++ adapter->net_stats.tx_bytes = adapter->stats.gotcl;
++ adapter->net_stats.multicast = adapter->stats.mprc;
++ adapter->net_stats.collisions = adapter->stats.colc;
++
++ /* Rx Errors */
++
++ adapter->net_stats.rx_errors = adapter->stats.rxerrc +
++ adapter->stats.crcerrs + adapter->stats.algnerrc +
++ adapter->stats.rlec + adapter->stats.mpc +
++ adapter->stats.cexterr;
++ adapter->net_stats.rx_dropped = adapter->stats.mpc;
++ adapter->net_stats.rx_length_errors = adapter->stats.rlec;
++ adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
++ adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
++ adapter->net_stats.rx_fifo_errors = adapter->stats.mpc;
++ adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
++
++ /* Tx Errors */
++
++ adapter->net_stats.tx_errors = adapter->stats.ecol +
++ adapter->stats.latecol;
++ adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
++ adapter->net_stats.tx_window_errors = adapter->stats.latecol;
++ adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+
+- /* Tx Dropped needs to be maintained elsewhere */
++ /* Tx Dropped needs to be maintained elsewhere */
+
+- /* Phy Stats */
++ /* Phy Stats */
+
+- if(hw->media_type == iegbe_media_type_copper
++ if(hw->media_type == iegbe_media_type_copper
+ || (hw->media_type == iegbe_media_type_oem
+ && iegbe_oem_phy_is_copper(&adapter->hw))) {
+- if((adapter->link_speed == SPEED_1000) &&
+- (!iegbe_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+- phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+- adapter->phy_stats.idle_errors += phy_tmp;
+- }
++ if((adapter->link_speed == SPEED_1000) &&
++ (!iegbe_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
++ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
++ adapter->phy_stats.idle_errors += phy_tmp;
++ }
+
+- if((hw->mac_type <= iegbe_82546) &&
+- (hw->phy_type == iegbe_phy_m88) &&
++ if((hw->mac_type <= iegbe_82546) &&
++ (hw->phy_type == iegbe_phy_m88) &&
+ !iegbe_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp)) {
+- adapter->phy_stats.receive_errors += phy_tmp;
+- }
++ adapter->phy_stats.receive_errors += phy_tmp;
++ }
+ }
+
+- spin_unlock_irqrestore(&adapter->stats_lock, flags);
++ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ }
+
+-#ifdef CONFIG_E1000_MQ
+-void
+-iegbe_rx_schedule(void *data)
++/**
++ * iegbe_intr_msi - Interrupt Handler
++ * @irq: interrupt number
++ * @data: pointer to a network interface device structure
++ **/
++
++static irqreturn_t iegbe_intr_msi(int irq, void *data)
+ {
+- struct net_device *poll_dev, *netdev = data;
+- struct iegbe_adapter *adapter = netdev->priv;
+- int this_cpu = get_cpu();
+-
+- poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu);
+- if (poll_dev == NULL) {
+- put_cpu();
+- return;
++ struct net_device *netdev = data;
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_hw *hw = &adapter->hw;
++ u32 icr = E1000_READ_REG(&adapter->hw, ICR);
++ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
++ hw->get_link_status = 1;
++ if (!test_bit(__E1000_DOWN, &adapter->flags))
++ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+- if (likely(netif_rx_schedule_prep(poll_dev))) {
+- __netif_rx_schedule(poll_dev);
+- } else {
+- iegbe_irq_enable(adapter);
+- }
+- put_cpu();
+-}
+-#endif
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+-/*
+- * Check for tx hang condition. This is the condition where a
+- * decsriptor is in the hardware and hasn't been processed for a
+- * while. This code is similar to the check in iegbe_clean_rx_irq()
+- */
+-static void
+-iegbe_tx_hang_check(struct iegbe_adapter *adapter,
+- struct iegbe_tx_ring *tx_ring)
+-{
+- struct net_device *netdev = adapter->netdev;
+- unsigned int i;
++ if(unlikely(icr & (E1000_ICR_RX_DESC_FIFO_PAR
++ | E1000_ICR_TX_DESC_FIFO_PAR
++ | E1000_ICR_PB
++ | E1000_ICR_CPP_TARGET
++ | E1000_ICR_CPP_MASTER ))) {
+
+- /* Check for a hang condition using the buffer currently at the Tx
+- head pointer */
+- i = readl(adapter->hw.hw_addr + tx_ring->tdh);
+-
+- if (adapter->detect_tx_hung) {
+- /* Detect a transmit hang in hardware, this serializes the
+- * check with the clearing of time_stamp and movement of i */
+- adapter->detect_tx_hung = FALSE;
+-
+- if (tx_ring->buffer_info[i].dma &&
+- time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ)
+- && !(E1000_READ_REG(&adapter->hw, STATUS) &
+- E1000_STATUS_TXOFF)) {
+-
+- /* detected Tx unit hang */
+- DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
+- " TDH <%x>\n"
+- " TDT <%x>\n"
+- " next_to_use <%x>\n"
+- " next_to_clean <%x>\n"
+- "buffer_info[tdh]\n"
+- " dma <%zx>\n"
+- " time_stamp <%lx>\n"
+- " jiffies <%lx>\n",
+- readl(adapter->hw.hw_addr + tx_ring->tdh),
+- readl(adapter->hw.hw_addr + tx_ring->tdt),
+- tx_ring->next_to_use,
+- tx_ring->next_to_clean,
+- (size_t)tx_ring->buffer_info[i].dma,
+- tx_ring->buffer_info[i].time_stamp,
+- jiffies);
+- netif_stop_queue(netdev);
+- }
++ iegbe_irq_disable(adapter);
++ printk("Critical error! ICR = 0x%x\n", icr);
++ return IRQ_HANDLED;
+ }
+-}
++ if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
++ adapter->total_tx_bytes = 0;
++ adapter->total_tx_packets = 0;
++ adapter->total_rx_bytes = 0;
++ adapter->total_rx_packets = 0;
++ __netif_rx_schedule(netdev, &adapter->napi);
++ } else
++ iegbe_irq_enable(adapter);
+
+-#endif
++ return IRQ_HANDLED;
++}
+
+ /**
+ * iegbe_intr - Interrupt Handler
+@@ -3546,364 +3478,208 @@ iegbe_tx_hang_check(struct iegbe_adapter
+ **/
+
+ static irqreturn_t
+-iegbe_intr(int irq, void *data, struct pt_regs *regs)
++iegbe_intr(int irq, void *data)
+ {
+- struct net_device *netdev = data;
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- struct iegbe_hw *hw = &adapter->hw;
+- uint32_t rctl, tctl;
+- uint32_t icr = E1000_READ_REG(hw, ICR);
+-#ifndef CONFIG_E1000_NAPI
+- uint32_t i;
+-#ifdef IEGBE_GBE_WORKAROUND
+- int rx_cleaned;
+-#endif
+-#endif
++ struct net_device *netdev = data;
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct iegbe_hw *hw = &adapter->hw;
++ u32 icr = E1000_READ_REG(&adapter->hw, ICR);
+
+- if(unlikely(!icr)) {
++ if (unlikely(!icr))
+ return IRQ_NONE; /* Not our interrupt */
+- }
++
++ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
++ * not set, then the adapter didn't send an interrupt */
++ if (unlikely(hw->mac_type >= iegbe_82571 &&
++ !(icr & E1000_ICR_INT_ASSERTED)))
++ return IRQ_NONE;
++
++
+ if(unlikely(icr & (E1000_ICR_RX_DESC_FIFO_PAR
+- | E1000_ICR_TX_DESC_FIFO_PAR
+- | E1000_ICR_PB
+- | E1000_ICR_CPP_TARGET
+- | E1000_ICR_CPP_MASTER ))) {
++ | E1000_ICR_TX_DESC_FIFO_PAR
++ | E1000_ICR_PB
++ | E1000_ICR_CPP_TARGET
++ | E1000_ICR_CPP_MASTER ))) {
+
+ iegbe_irq_disable(adapter);
+- tctl = E1000_READ_REG(&adapter->hw, TCTL);
+- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+- E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_TCTL_EN);
+- E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN);
+-
+- tasklet_data = (unsigned long) (icr + adapter->bd_number);
+- tasklet_schedule(&iegbe_reset_tasklet);
+-
+- return IRQ_HANDLED;
+- }
+-
+-#ifdef CONFIG_E1000_NAPI
+- atomic_inc(&adapter->irq_sem);
+-#ifdef IEGBE_GBE_WORKAROUND
+- /* Ensure that the TXQE interrupt is enabled in NAPI mode */
+- E1000_WRITE_REG(hw, IMC, ~E1000_IMS_TXQE);
+-#else
+- E1000_WRITE_REG(hw, IMC, ~0);
+-#endif
+- E1000_WRITE_FLUSH(hw);
+-#ifdef CONFIG_E1000_MQ
+- if (atomic_read(&adapter->rx_sched_call_data.count) == 0) {
+- cpu_set(adapter->cpu_for_queue[0],
+- adapter->rx_sched_call_data.cpumask);
+- for (i = 1; i < adapter->num_queues; i++) {
+- cpu_set(adapter->cpu_for_queue[i],
+- adapter->rx_sched_call_data.cpumask);
+- atomic_inc(&adapter->irq_sem);
+- }
+- atomic_set(&adapter->rx_sched_call_data.count, i);
+- smp_call_async_mask(&adapter->rx_sched_call_data);
+- } else {
+- DEBUGOUT("call_data.count == %u\n",
+- atomic_read(&adapter->rx_sched_call_data.count));
++ printk("Critical error! ICR = 0x%x\n", icr);
++ return IRQ_HANDLED;
+ }
+-#else
+- if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) {
+- __netif_rx_schedule(&adapter->polling_netdev[0]);
+- } else {
+- iegbe_irq_enable(adapter);
+- }
+-#endif
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+- /* Clean the Tx ring */
+- for (i = 0; i < E1000_MAX_INTR; i++) {
+- adapter->stats.rx_next_to_clean = adapter->rx_ring->next_to_clean;
+- adapter->stats.rx_next_to_use = adapter->rx_ring->next_to_use;
+-
+- adapter->stats.tx_next_to_clean = adapter->tx_ring->next_to_clean;
+- adapter->stats.tx_next_to_use = adapter->tx_ring->next_to_use;
+-
+- /* Only clean Tx descriptors for a TXQE interrupt */
+- if(icr & E1000_ICR_TXQE) {
+- adapter->stats.txqec++;
+- iegbe_clean_tx_ring_partial(adapter, adapter->tx_ring);
+- }
+- else {
+- iegbe_tx_hang_check(adapter, adapter->tx_ring);
+- }
+- }
+
+-#endif /*IEGBE_GBE_WORKAROUND */
+-
+-#else
+- /* Writing IMC and IMS is needed for 82547.
+- * Due to Hub Link bus being occupied, an interrupt
+- * de-assertion message is not able to be sent.
+- * When an interrupt assertion message is generated later,
+- * two messages are re-ordered and sent out.
+- * That causes APIC to think 82547 is in de-assertion
+- * state, while 82547 is in assertion state, resulting
+- * in dead lock. Writing IMC forces 82547 into
+- * de-assertion state.
+- */
+- if (hw->mac_type == iegbe_82547 || hw->mac_type == iegbe_82547_rev_2) {
+- atomic_inc(&adapter->irq_sem);
+- E1000_WRITE_REG(hw, IMC, ~0);
+- }
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+-
+- for (i = 0; i < E1000_MAX_INTR; i++) {
+- rx_cleaned = adapter->clean_rx(adapter, adapter->rx_ring);
+- adapter->stats.rx_next_to_clean = adapter->rx_ring->next_to_clean;
+- adapter->stats.rx_next_to_use = adapter->rx_ring->next_to_use;
+-
+- adapter->stats.tx_next_to_clean = adapter->tx_ring->next_to_clean;
+- adapter->stats.tx_next_to_use = adapter->tx_ring->next_to_use;
+-
+- /* Only clean Tx descriptors for a TXQE interrupt */
+- if(icr & E1000_ICR_TXQE) {
+- adapter->stats.txqec++;
+- iegbe_clean_tx_ring_partial(adapter, adapter->tx_ring);
+- }
+- else {
+- iegbe_tx_hang_check(adapter, adapter->tx_ring);
+- }
+- if(!rx_cleaned) {
+- break;
+- }
++ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
++ * need for the IMC write */
++ if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
++ hw->get_link_status = 1;
++ /* guard against interrupt when we're going down */
++ if (!test_bit(__E1000_DOWN, &adapter->flags))
++ mod_timer(&adapter->watchdog_timer, jiffies + 1);
++
+ }
+
+-#else
+- for (i = 0; i < E1000_MAX_INTR; i++)
+- if(unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
+- !iegbe_clean_tx_irq(adapter, adapter->tx_ring))) {
+- break;
+- }
+-#endif
+-
+- if (hw->mac_type == iegbe_82547 || hw->mac_type == iegbe_82547_rev_2) {
+- iegbe_irq_enable(adapter);
+- }
+-#endif
+-#ifdef E1000_COUNT_ICR
+- adapter->icr_txdw += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_txqe += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_lsc += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_rxseq += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_rxdmt += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_rxo += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_rxt += icr & 0x01UL;
+- if(hw->mac_type != iegbe_icp_xxxx) {
+- icr >>= 0x2;
+- adapter->icr_mdac += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_rxcfg += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_gpi += icr & 0x01UL;
+- } else {
+- icr >>= 0x4;
+- }
+- if(hw->mac_type == iegbe_icp_xxxx) {
+- icr >>= 0xc;
+- adapter->icr_pb += icr & 0x01UL;
+- icr >>= 0x3;
+- adapter->icr_intmem_icp_xxxx += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_cpp_target += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_cpp_master += icr & 0x01UL;
+- icr >>= 0x1;
+- adapter->icr_stat += icr & 0x01UL;
++ if (unlikely(hw->mac_type < iegbe_82571)) {
++ E1000_WRITE_REG(&adapter->hw, IMC, ~0);
++ E1000_WRITE_FLUSH(&adapter->hw);
+ }
+-#endif
++ if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
++ adapter->total_tx_bytes = 0;
++ adapter->total_tx_packets = 0;
++ adapter->total_rx_bytes = 0;
++ adapter->total_rx_packets = 0;
++ __netif_rx_schedule(netdev, &adapter->napi);
++ } else
++ /* this really should not happen! if it does it is basically a
++ * bug, but not a hard error, so enable ints and continue */
++ iegbe_irq_enable(adapter);
+
+ return IRQ_HANDLED;
+ }
+
+-#ifdef CONFIG_E1000_NAPI
+ /**
+ * iegbe_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ **/
+-
+-static int
+-iegbe_clean(struct net_device *poll_dev, int *budget)
++static int iegbe_clean(struct napi_struct *napi, int budget)
+ {
+- struct iegbe_adapter *adapter;
+- int work_to_do = min(*budget, poll_dev->quota);
+- int tx_cleaned, i = 0, work_done = 0;
++ struct iegbe_adapter *adapter = container_of(napi, struct iegbe_adapter, napi);
++ struct net_device *poll_dev = adapter->netdev;
++ int tx_cleaned = 0, work_done = 0;
+
+ /* Must NOT use netdev_priv macro here. */
+ adapter = poll_dev->priv;
+
+- /* Keep link state information with original netdev */
+- if (!netif_carrier_ok(adapter->netdev)) {
+- goto quit_polling;
+- }
+- while (poll_dev != &adapter->polling_netdev[i]) {
+- i++;
+- if (unlikely(i == adapter->num_queues)) {
+- BUG();
+- }
+- }
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+- /* Tx descriptors are cleaned in iegbe_intr(). No need to clean
+- them here */
+- tx_cleaned = FALSE;
+-#else
+- tx_cleaned = iegbe_clean_tx_irq(adapter, &adapter->tx_ring[i]);
+-#endif
+- adapter->clean_rx(adapter, &adapter->rx_ring[i],
+- &work_done, work_to_do);
+-
+- *budget -= work_done;
+- poll_dev->quota -= work_done;
+-
+- /* If no Tx and not enough Rx work done, exit the polling mode */
+- if((!tx_cleaned && (work_done == 0)) ||
+- !netif_running(adapter->netdev)) {
+-quit_polling:
+- netif_rx_complete(poll_dev);
++ /* iegbe_clean is called per-cpu. This lock protects
++ * tx_ring[0] from being cleaned by multiple cpus
++ * simultaneously. A failure obtaining the lock means
++ * tx_ring[0] is currently being cleaned anyway. */
++ if (spin_trylock(&adapter->tx_queue_lock)) {
++ tx_cleaned = iegbe_clean_tx_irq(adapter,
++ &adapter->tx_ring[0]);
++ spin_unlock(&adapter->tx_queue_lock);
++ }
++
++ adapter->clean_rx(adapter, &adapter->rx_ring[0],
++ &work_done, budget);
++
++ if (tx_cleaned)
++ work_done = budget;
++
++ /* If budget not fully consumed, exit the polling mode */
++ if (work_done < budget) {
++ if (likely(adapter->itr_setting & 3))
++ iegbe_set_itr(adapter);
++ netif_rx_complete(poll_dev, napi);
+ iegbe_irq_enable(adapter);
+- return 0;
+ }
+
+- return 1;
++ return work_done;
+ }
+
+-#endif
+-
+-
+-#ifndef IEGBE_GBE_WORKAROUND
+ /**
+ * iegbe_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ **/
+-
+-static boolean_t
+-iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
++static bool iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
+ struct iegbe_tx_ring *tx_ring)
+ {
+- struct net_device *netdev = adapter->netdev;
+- struct iegbe_tx_desc *tx_desc, *eop_desc;
+- struct iegbe_buffer *buffer_info;
+- unsigned int i, eop;
+- boolean_t cleaned = FALSE;
++ struct iegbe_hw *hw = &adapter->hw;
++ struct net_device *netdev = adapter->netdev;
++ struct iegbe_tx_desc *tx_desc, *eop_desc;
++ struct iegbe_buffer *buffer_info;
++ unsigned int i, eop;
++ unsigned int count = 0;
++ bool cleaned = false;
++ unsigned int total_tx_bytes=0, total_tx_packets=0;
+
+- i = tx_ring->next_to_clean;
+- eop = tx_ring->buffer_info[i].next_to_watch;
+- eop_desc = E1000_TX_DESC(*tx_ring, eop);
++ i = tx_ring->next_to_clean;
++ eop = tx_ring->buffer_info[i].next_to_watch;
++ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
+ while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
+- /* Premature writeback of Tx descriptors clear (free buffers
+- * and unmap pci_mapping) previous_buffer_info */
+- if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
+- iegbe_unmap_and_free_tx_resource(adapter,
+- &tx_ring->previous_buffer_info);
+- }
+-
+- for (cleaned = FALSE; !cleaned; ) {
+- tx_desc = E1000_TX_DESC(*tx_ring, i);
+- buffer_info = &tx_ring->buffer_info[i];
+- cleaned = (i == eop);
+-
+-#ifdef NETIF_F_TSO
+- if (!(netdev->features & NETIF_F_TSO)) {
+-#endif
+- iegbe_unmap_and_free_tx_resource(adapter,
+- buffer_info);
+-#ifdef NETIF_F_TSO
+- } else {
+- if (cleaned) {
+- memcpy(&tx_ring->previous_buffer_info,
+- buffer_info,
+- sizeof(struct iegbe_buffer));
+- memset(buffer_info, 0,
+- sizeof(struct iegbe_buffer));
+- } else {
+- iegbe_unmap_and_free_tx_resource(
+- adapter, buffer_info);
+- }
+- }
+-#endif
+-
+- tx_desc->buffer_addr = 0;
+- tx_desc->lower.data = 0;
++ for (cleaned = false; !cleaned; ) {
++ tx_desc = E1000_TX_DESC(*tx_ring, i);
++ buffer_info = &tx_ring->buffer_info[i];
++ cleaned = (i == eop);
++
++ if (cleaned) {
++ struct sk_buff *skb = buffer_info->skb;
++ unsigned int segs = 0, bytecount;
++ segs = skb_shinfo(skb)->gso_segs ?: 1;
++ bytecount = ((segs - 1) * skb_headlen(skb)) +
++ skb->len;
++ total_tx_packets += segs;
++ total_tx_bytes += bytecount;
++ }
++ iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
+ tx_desc->upper.data = 0;
+
+- if (unlikely(++i == tx_ring->count)) { i = 0; }
+- }
+-
+- tx_ring->pkt++;
++ if (unlikely(++i == tx_ring->count)) i = 0;
++ }
+
+- eop = tx_ring->buffer_info[i].next_to_watch;
+- eop_desc = E1000_TX_DESC(*tx_ring, eop);
+- }
++ eop = tx_ring->buffer_info[i].next_to_watch;
++ eop_desc = E1000_TX_DESC(*tx_ring, eop);
++#define E1000_TX_WEIGHT 64
++ /* weight of a sort for tx, to avoid endless transmit cleanup */
++ if (count++ == E1000_TX_WEIGHT)
++ break;
++ }
+
+ tx_ring->next_to_clean = i;
+
+- spin_lock(&tx_ring->tx_lock);
++#define TX_WAKE_THRESHOLD 32
+
+- if (unlikely(cleaned && netif_queue_stopped(netdev) &&
+- netif_carrier_ok(netdev))) {
+- netif_wake_queue(netdev);
+- }
+- spin_unlock(&tx_ring->tx_lock);
+-
+- if (adapter->detect_tx_hung) {
+- /* Detect a transmit hang in hardware, this serializes the
+- * check with the clearing of time_stamp and movement of i */
+- adapter->detect_tx_hung = FALSE;
+-
+- if (tx_ring->buffer_info[i].dma &&
+- time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ)
+- && !(E1000_READ_REG(&adapter->hw, STATUS) &
+- E1000_STATUS_TXOFF)) {
+-
+- /* detected Tx unit hang */
+- i = tx_ring->next_to_clean;
+- eop = tx_ring->buffer_info[i].next_to_watch;
+- eop_desc = E1000_TX_DESC(*tx_ring, eop);
+- DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
+- " TDH <%x>\n"
+- " TDT <%x>\n"
+- " next_to_use <%x>\n"
+- " next_to_clean <%x>\n"
+- "buffer_info[next_to_clean]\n"
+- " dma <%zx>\n"
+- " time_stamp <%lx>\n"
+- " next_to_watch <%x>\n"
+- " jiffies <%lx>\n"
+- " next_to_watch.status <%x>\n",
+- readl(adapter->hw.hw_addr + tx_ring->tdh),
+- readl(adapter->hw.hw_addr + tx_ring->tdt),
+- tx_ring->next_to_use,
+- i,
+- (size_t)tx_ring->buffer_info[i].dma,
+- tx_ring->buffer_info[i].time_stamp,
+- eop,
+- jiffies,
+- eop_desc->upper.fields.status);
+- netif_stop_queue(netdev);
++ if (unlikely(cleaned && netif_carrier_ok(netdev) &&
++ E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
++ /* Make sure that anybody stopping the queue after this
++ * sees the new next_to_clean.
++ */
++ smp_mb();
++ if (netif_queue_stopped(netdev)) {
++ netif_wake_queue(netdev);
++ ++adapter->restart_queue;
+ }
+ }
+-#ifdef NETIF_F_TSO
+- if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+- time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ))) {
+- iegbe_unmap_and_free_tx_resource(
+- adapter, &tx_ring->previous_buffer_info);
++
++ if (adapter->detect_tx_hung) {
++ /* Detect a transmit hang in hardware, this serializes the
++ * check with the clearing of time_stamp and movement of i */
++ adapter->detect_tx_hung = false;
++
++ if (tx_ring->buffer_info[eop].dma &&
++ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
++ (adapter->tx_timeout_factor * HZ))
++ && !(E1000_READ_REG(hw, STATUS) & E1000_STATUS_TXOFF)) {
++
++ /* detected Tx unit hang */
++ DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
++ " Tx Queue <%lu>\n"
++ " TDH <%x>\n"
++ " TDT <%x>\n"
++ " next_to_use <%x>\n"
++ " next_to_clean <%x>\n"
++ "buffer_info[next_to_clean]\n"
++ " time_stamp <%lx>\n"
++ " next_to_watch <%x>\n"
++ " jiffies <%lx>\n"
++ " next_to_watch.status <%x>\n",
++ (unsigned long)((tx_ring - adapter->tx_ring) /
++ sizeof(struct iegbe_tx_ring)),
++ readl(hw->hw_addr + tx_ring->tdh),
++ readl(hw->hw_addr + tx_ring->tdt),
++ tx_ring->next_to_use,
++ tx_ring->next_to_clean,
++ tx_ring->buffer_info[eop].time_stamp,
++ eop,
++ jiffies,
++ eop_desc->upper.fields.status);
++ netif_stop_queue(netdev);
++ }
+ }
+-#endif
+- return cleaned;
++ adapter->total_tx_bytes += total_tx_bytes;
++ adapter->total_tx_packets += total_tx_packets;
++ adapter->net_stats.tx_bytes += total_tx_bytes;
++ adapter->net_stats.tx_packets += total_tx_packets;
++ return cleaned;
+ }
+-#endif
+
+ /**
+ * iegbe_rx_checksum - Receive Checksum Offload for 82543
+@@ -3913,192 +3689,193 @@ iegbe_clean_tx_irq(struct iegbe_adapter
+ * @sk_buff: socket buffer with received data
+ **/
+
+-static inline void
+-iegbe_rx_checksum(struct iegbe_adapter *adapter,
+- uint32_t status_err, uint32_t csum,
+- struct sk_buff *skb)
++static void iegbe_rx_checksum(struct iegbe_adapter *adapter, u32 status_err,
++ u32 csum, struct sk_buff *skb)
+ {
+- uint16_t status = (uint16_t)status_err;
+- uint8_t errors = (uint8_t)(status_err >> 0x18);
++ struct iegbe_hw *hw = &adapter->hw;
++ u16 status = (u16)status_err;
++ u8 errors = (u8)(status_err >> 24);
+ skb->ip_summed = CHECKSUM_NONE;
+
+- /* 82543 or newer only */
+- if(unlikely(adapter->hw.mac_type < iegbe_82543)) { return; }
+- /* Ignore Checksum bit is set */
+- if(unlikely(status & E1000_RXD_STAT_IXSM)) { return; }
+- /* TCP/UDP checksum error bit is set */
+- if(unlikely(errors & E1000_RXD_ERR_TCPE)) {
+- /* let the stack verify checksum errors */
+- adapter->hw_csum_err++;
+- return;
+- }
+- /* TCP/UDP Checksum has not been calculated */
+- if(adapter->hw.mac_type <= iegbe_82547_rev_2) {
+- if(!(status & E1000_RXD_STAT_TCPCS)) {
+- return;
++ /* 82543 or newer only */
++ if (unlikely(hw->mac_type < iegbe_82543)) return;
++ /* Ignore Checksum bit is set */
++ if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
++ /* TCP/UDP checksum error bit is set */
++ if(unlikely(errors & E1000_RXD_ERR_TCPE)) {
++ /* let the stack verify checksum errors */
++ adapter->hw_csum_err++;
++ return;
++ }
++ /* TCP/UDP Checksum has not been calculated */
++ if (hw->mac_type <= iegbe_82547_rev_2) {
++ if (!(status & E1000_RXD_STAT_TCPCS))
++ return;
++ } else {
++ if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
++ return;
+ }
+- } else {
+- if(!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) {
+- return;
+- }
++ /* It must be a TCP or UDP packet with a valid checksum */
++ if(likely(status & E1000_RXD_STAT_TCPCS)) {
++ /* TCP checksum is good */
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++ } else if (hw->mac_type > iegbe_82547_rev_2) {
++ /* IP fragment with UDP payload */
++ /* Hardware complements the payload checksum, so we undo it
++ * and then put the value in host order for further stack use.
++ */
++ __sum16 sum = (__force __sum16)htons(csum);
++ skb->csum = csum_unfold(~sum);
++ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+- /* It must be a TCP or UDP packet with a valid checksum */
+- if(likely(status & E1000_RXD_STAT_TCPCS)) {
+- /* TCP checksum is good */
+- skb->ip_summed = CHECKSUM_UNNECESSARY;
+- } else if(adapter->hw.mac_type > iegbe_82547_rev_2) {
+- /* IP fragment with UDP payload */
+- /* Hardware complements the payload checksum, so we undo it
+- * and then put the value in host order for further stack use.
+- */
+- csum = ntohl(csum ^ 0xFFFF);
+- skb->csum = csum;
+- skb->ip_summed = CHECKSUM_HW;
+- }
+- adapter->hw_csum_good++;
++ adapter->hw_csum_good++;
+ }
+
+ /**
+ * iegbe_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ **/
+-
+-static boolean_t
+-#ifdef CONFIG_E1000_NAPI
+-iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
++static bool iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+-#else
+-iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring)
+-#endif
+ {
+- struct net_device *netdev = adapter->netdev;
+- struct pci_dev *pdev = adapter->pdev;
+- struct iegbe_rx_desc *rx_desc;
+- struct iegbe_buffer *buffer_info;
+- struct sk_buff *skb;
+- unsigned long flags = 0;
+- uint32_t length;
+- uint8_t last_byte;
+- unsigned int i;
+- boolean_t cleaned = FALSE;
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+- /* Need to keep track of the amount of Rx descriptors that we
+- cleaned to ensure that we don't supply too many back to the
+- hardware */
+- int cleaned_count = 0;
+-#endif
+-
+- i = rx_ring->next_to_clean;
+- rx_desc = E1000_RX_DESC(*rx_ring, i);
+-
+- while(rx_desc->status & E1000_RXD_STAT_DD) {
+- buffer_info = &rx_ring->buffer_info[i];
+-#ifdef CONFIG_E1000_NAPI
+- if(*work_done >= work_to_do) {
+- break;
+- }
+- (*work_done)++;
+-#endif
+- cleaned = TRUE;
++ struct iegbe_hw *hw = &adapter->hw;
++ struct net_device *netdev = adapter->netdev;
++ struct pci_dev *pdev = adapter->pdev;
++ struct iegbe_rx_desc *rx_desc, *next_rxd;
++ struct iegbe_buffer *buffer_info, *next_buffer;
++ unsigned long flags;
++ u32 length;
++ u8 last_byte;
++ unsigned int i;
++ int cleaned_count = 0;
++ bool cleaned = false;
++ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+-#ifdef IEGBE_GBE_WORKAROUND
+- cleaned_count++;
+-#endif
++ i = rx_ring->next_to_clean;
++ rx_desc = E1000_RX_DESC(*rx_ring, i);
++ buffer_info = &rx_ring->buffer_info[i];
+
+- pci_unmap_single(pdev,
+- buffer_info->dma,
+- buffer_info->length,
+- PCI_DMA_FROMDEVICE);
++ while(rx_desc->status & E1000_RXD_STAT_DD) {
++ struct sk_buff *skb;
++ u8 status;
++ if (*work_done >= work_to_do)
++ break;
++ (*work_done)++;
+
++ status = rx_desc->status;
+ skb = buffer_info->skb;
+- length = le16_to_cpu(rx_desc->length);
++ buffer_info->skb = NULL;
++ prefetch(skb->data - NET_IP_ALIGN);
++ if (++i == rx_ring->count) i = 0;
++ next_rxd = E1000_RX_DESC(*rx_ring, i);
++ prefetch(next_rxd);
++ next_buffer = &rx_ring->buffer_info[i];
++ cleaned = true;
++ cleaned_count++;
++ pci_unmap_single(pdev,
++ buffer_info->dma,
++ buffer_info->length,
++ PCI_DMA_FROMDEVICE);
++
++ length = le16_to_cpu(rx_desc->length);
++
++ if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
++ /* All receives must fit into a single buffer */
++ E1000_DBG("%s: Receive packet consumed multiple"
++ " buffers\n", netdev->name);
++ buffer_info->skb = skb;
++ goto next_desc;
++ }
+
+- if(unlikely(!(rx_desc->status & E1000_RXD_STAT_EOP))) {
+- /* All receives must fit into a single buffer */
+- E1000_DBG("%s: Receive packet consumed multiple"
+- " buffers\n", netdev->name);
+- dev_kfree_skb_irq(skb);
+- goto next_desc;
+- }
++ if(unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
++ last_byte = *(skb->data + length - 1);
++ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
++ last_byte)) {
++ spin_lock_irqsave(&adapter->stats_lock, flags);
++ iegbe_tbi_adjust_stats(hw, &adapter->stats,
++ length, skb->data);
++ spin_unlock_irqrestore(&adapter->stats_lock,
++ flags);
++ length--;
++ } else {
++ buffer_info->skb = skb;
++ goto next_desc;
++ }
++ }
+
+- if(unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
+- last_byte = *(skb->data + length - 0x1);
+- if(TBI_ACCEPT(&adapter->hw, rx_desc->status,
+- rx_desc->errors, length, last_byte)) {
+- spin_lock_irqsave(&adapter->stats_lock, flags);
+- iegbe_tbi_adjust_stats(&adapter->hw,
+- &adapter->stats,
+- length, skb->data);
+- spin_unlock_irqrestore(&adapter->stats_lock,
+- flags);
+- length--;
+- } else {
+- dev_kfree_skb_irq(skb);
+- goto next_desc;
++ /* adjust length to remove Ethernet CRC, this must be
++ * done after the TBI_ACCEPT workaround above */
++ length -= 4;
++
++ /* probably a little skewed due to removing CRC */
++ total_rx_bytes += length;
++ total_rx_packets++;
++
++ /* code added for copybreak, this should improve
++ * performance for small packets with large amounts
++ * of reassembly being done in the stack */
++ if (length < copybreak) {
++ struct sk_buff *new_skb =
++ netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
++ if (new_skb) {
++ skb_reserve(new_skb, NET_IP_ALIGN);
++ skb_copy_to_linear_data_offset(new_skb,
++ -NET_IP_ALIGN,
++ (skb->data -
++ NET_IP_ALIGN),
++ (length +
++ NET_IP_ALIGN));
++ /* save the skb in buffer_info as good */
++ buffer_info->skb = skb;
++ skb = new_skb;
+ }
++ /* else just continue with the old one */
+ }
+-
+- /* Good Receive */
+- skb_put(skb, length - ETHERNET_FCS_SIZE);
++ /* Good Receive */
++ skb_put(skb, length);
+
+ /* Receive Checksum Offload */
+ iegbe_rx_checksum(adapter,
+- (uint32_t)(rx_desc->status) |
+- ((uint32_t)(rx_desc->errors) << 0x18),
+- rx_desc->csum, skb);
++ (u32)(status) |
++ ((u32)(rx_desc->errors) << 24),
++ le16_to_cpu(rx_desc->csum), skb);
++
+ skb->protocol = eth_type_trans(skb, netdev);
+-#ifdef CONFIG_E1000_NAPI
+-#ifdef NETIF_F_HW_VLAN_TX
+- if(unlikely(adapter->vlgrp &&
+- (rx_desc->status & E1000_RXD_STAT_VP))) {
++
++ if (unlikely(adapter->vlgrp &&
++ (status & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+- le16_to_cpu(rx_desc->special) &
+- E1000_RXD_SPC_VLAN_MASK);
++ le16_to_cpu(rx_desc->special));
+ } else {
+ netif_receive_skb(skb);
+ }
+-#else
+- netif_receive_skb(skb);
+-#endif
+-#else /* CONFIG_E1000_NAPI */
+-#ifdef NETIF_F_HW_VLAN_TX
+- if(unlikely(adapter->vlgrp &&
+- (rx_desc->status & E1000_RXD_STAT_VP))) {
+- vlan_hwaccel_rx(skb, adapter->vlgrp,
+- le16_to_cpu(rx_desc->special) &
+- E1000_RXD_SPC_VLAN_MASK);
+- } else {
+- netif_rx(skb);
+- }
+-#else
+- netif_rx(skb);
+-#endif
+-#endif /* CONFIG_E1000_NAPI */
++
+ netdev->last_rx = jiffies;
+- rx_ring->pkt++;
+
+ next_desc:
+ rx_desc->status = 0;
+- buffer_info->skb = NULL;
+- if(unlikely(++i == rx_ring->count)) { i = 0; }
+
+- rx_desc = E1000_RX_DESC(*rx_ring, i);
++ /* return some buffers to hardware, one at a time is too slow */
++ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
++ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
++ cleaned_count = 0;
++ }
++
++ /* use prefetched values */
++ rx_desc = next_rxd;
++ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+-#ifdef IEGBE_GBE_WORKAROUND
+- /* Only allocate the number of buffers that we have actually
+- cleaned! */
+- if (cleaned_count) {
+- adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+- }
+-#else
+- adapter->alloc_rx_buf(adapter, rx_ring);
+-#endif
+-
++ cleaned_count = E1000_DESC_UNUSED(rx_ring);
++ if (cleaned_count)
++ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
++
++ adapter->total_rx_packets += total_rx_packets;
++ adapter->total_rx_bytes += total_rx_bytes;
++ adapter->net_stats.rx_bytes += total_rx_bytes;
++ adapter->net_stats.rx_packets += total_rx_packets;
+ return cleaned;
+ }
+
+@@ -4107,161 +3884,153 @@ next_desc:
+ * @adapter: board private structure
+ **/
+
+-static boolean_t
+-#ifdef CONFIG_E1000_NAPI
+-iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
++static bool iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+-#else
+-iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring)
+-#endif
+ {
+- union iegbe_rx_desc_packet_split *rx_desc;
+- struct net_device *netdev = adapter->netdev;
+- struct pci_dev *pdev = adapter->pdev;
+- struct iegbe_buffer *buffer_info;
+- struct iegbe_ps_page *ps_page;
+- struct iegbe_ps_page_dma *ps_page_dma;
+- struct sk_buff *skb;
+- unsigned int i, j;
+- uint32_t length, staterr;
+- boolean_t cleaned = FALSE;
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+- /* Need to keep track of the amount of Rx descriptors that we
+- cleaned to ensure that we don't supply too many back to the
+- hardware */
+- int cleaned_count = 0;
+-#endif
+-
+- i = rx_ring->next_to_clean;
+- rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+- staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
+-
+- while(staterr & E1000_RXD_STAT_DD) {
+- buffer_info = &rx_ring->buffer_info[i];
+- ps_page = &rx_ring->ps_page[i];
+- ps_page_dma = &rx_ring->ps_page_dma[i];
+-#ifdef CONFIG_E1000_NAPI
+- if(unlikely(*work_done >= work_to_do)) {
+- break;
+- }
+- (*work_done)++;
+-#endif
+- cleaned = TRUE;
+-
+-#ifdef IEGBE_GBE_WORKAROUND
+- cleaned_count++;
+-#endif
++ union iegbe_rx_desc_packet_split *rx_desc, *next_rxd;
++ struct net_device *netdev = adapter->netdev;
++ struct pci_dev *pdev = adapter->pdev;
++ struct iegbe_buffer *buffer_info, *next_buffer;
++ struct iegbe_ps_page *ps_page;
++ struct iegbe_ps_page_dma *ps_page_dma;
++ struct sk_buff *skb;
++ unsigned int i, j;
++ u32 length, staterr;
++ int cleaned_count = 0;
++ bool cleaned = false;
++ unsigned int total_rx_bytes=0, total_rx_packets=0;
++
++ i = rx_ring->next_to_clean;
++ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
++ staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
++ buffer_info = &rx_ring->buffer_info[i];
+
+- pci_unmap_single(pdev, buffer_info->dma,
+- buffer_info->length,
+- PCI_DMA_FROMDEVICE);
++ while(staterr & E1000_RXD_STAT_DD) {
++ ps_page = &rx_ring->ps_page[i];
++ ps_page_dma = &rx_ring->ps_page_dma[i];
++
++ if (unlikely(*work_done >= work_to_do))
++ break;
++ (*work_done)++;
+
+ skb = buffer_info->skb;
++ prefetch(skb->data - NET_IP_ALIGN);
++ if (++i == rx_ring->count) i = 0;
++ next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
++ prefetch(next_rxd);
++ next_buffer = &rx_ring->buffer_info[i];
++ cleaned = true;
++ cleaned_count++;
++ pci_unmap_single(pdev, buffer_info->dma,
++ buffer_info->length,
++ PCI_DMA_FROMDEVICE);
++
++ if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
++ E1000_DBG("%s: Packet Split buffers didn't pick up"
++ " the full packet\n", netdev->name);
++ dev_kfree_skb_irq(skb);
++ goto next_desc;
++ }
+
+- if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
+- E1000_DBG("%s: Packet Split buffers didn't pick up"
+- " the full packet\n", netdev->name);
+- dev_kfree_skb_irq(skb);
+- goto next_desc;
+- }
+-
+- if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
+- dev_kfree_skb_irq(skb);
+- goto next_desc;
+- }
+-
+- length = le16_to_cpu(rx_desc->wb.middle.length0);
++ if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
++ dev_kfree_skb_irq(skb);
++ goto next_desc;
++ }
+
+- if(unlikely(!length)) {
+- E1000_DBG("%s: Last part of the packet spanning"
+- " multiple descriptors\n", netdev->name);
+- dev_kfree_skb_irq(skb);
+- goto next_desc;
+- }
++ length = le16_to_cpu(rx_desc->wb.middle.length0);
+
+- /* Good Receive */
+- skb_put(skb, length);
+-
+- for(j = 0; j < adapter->rx_ps_pages; j++) {
+- if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j]))) {
+- break;
+- }
+- pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
+- PAGE_SIZE, PCI_DMA_FROMDEVICE);
+- ps_page_dma->ps_page_dma[j] = 0;
+- skb_shinfo(skb)->frags[j].page =
+- ps_page->ps_page[j];
+- ps_page->ps_page[j] = NULL;
+- skb_shinfo(skb)->frags[j].page_offset = 0;
+- skb_shinfo(skb)->frags[j].size = length;
+- skb_shinfo(skb)->nr_frags++;
+- skb->len += length;
+- skb->data_len += length;
+- }
++ if(unlikely(!length)) {
++ E1000_DBG("%s: Last part of the packet spanning"
++ " multiple descriptors\n", netdev->name);
++ dev_kfree_skb_irq(skb);
++ goto next_desc;
++ }
+
+- iegbe_rx_checksum(adapter, staterr,
+- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+- skb->protocol = eth_type_trans(skb, netdev);
++ /* Good Receive */
++ skb_put(skb, length);
+
+- if(likely(rx_desc->wb.upper.header_status &
+- E1000_RXDPS_HDRSTAT_HDRSP)) {
+- adapter->rx_hdr_split++;
+-#ifdef HAVE_RX_ZERO_COPY
+- skb_shinfo(skb)->zero_copy = TRUE;
+-#endif
+- }
+-#ifdef CONFIG_E1000_NAPI
+-#ifdef NETIF_F_HW_VLAN_TX
+- if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
+- vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+- le16_to_cpu(rx_desc->wb.middle.vlan) &
+- E1000_RXD_SPC_VLAN_MASK);
+- } else {
+- netif_receive_skb(skb);
+- }
+-#else
+- netif_receive_skb(skb);
+-#endif
+-#else /* CONFIG_E1000_NAPI */
+-#ifdef NETIF_F_HW_VLAN_TX
+- if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
+- vlan_hwaccel_rx(skb, adapter->vlgrp,
+- le16_to_cpu(rx_desc->wb.middle.vlan) &
+- E1000_RXD_SPC_VLAN_MASK);
+- } else {
+- netif_rx(skb);
+- }
+-#else
+- netif_rx(skb);
+-#endif
+-#endif /* CONFIG_E1000_NAPI */
+- netdev->last_rx = jiffies;
+- rx_ring->pkt++;
++ {
++ int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
++ if (l1 && (l1 <= copybreak) && ((length + l1) <= adapter->rx_ps_bsize0)) {
++ u8 *vaddr;
++ pci_dma_sync_single_for_cpu(pdev,
++ ps_page_dma->ps_page_dma[0],
++ PAGE_SIZE,
++ PCI_DMA_FROMDEVICE);
++ vaddr = kmap_atomic(ps_page->ps_page[0],
++ KM_SKB_DATA_SOFTIRQ);
++ memcpy(skb_tail_pointer(skb), vaddr, l1);
++ kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
++ pci_dma_sync_single_for_device(pdev,
++ ps_page_dma->ps_page_dma[0],
++ PAGE_SIZE, PCI_DMA_FROMDEVICE);
++ l1 -= 4;
++ skb_put(skb, l1);
++ goto copydone;
++ } /* if */
++ }
++ for (j = 0; j < adapter->rx_ps_pages; j++) {
++ length = le16_to_cpu(rx_desc->wb.upper.length[j]);
++ if (!length)
++ break;
++ pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
++ PAGE_SIZE, PCI_DMA_FROMDEVICE);
++ ps_page_dma->ps_page_dma[j] = 0;
++ skb_fill_page_desc(skb, j, ps_page->ps_page[j], 0,
++ length);
++ ps_page->ps_page[j] = NULL;
++ skb->len += length;
++ skb->data_len += length;
++ skb->truesize += length;
++ }
+
+-next_desc:
+- rx_desc->wb.middle.status_error &= ~0xFF;
+- buffer_info->skb = NULL;
+- if(unlikely(++i == rx_ring->count)) { i = 0; }
++ pskb_trim(skb, skb->len - 4);
++copydone:
++ total_rx_bytes += skb->len;
++ total_rx_packets++;
++ iegbe_rx_checksum(adapter, staterr,
++ le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
++ skb->protocol = eth_type_trans(skb, netdev);
++
++ if(likely(rx_desc->wb.upper.header_status &
++ cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
++ adapter->rx_hdr_split++;
++
++ if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
++ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
++ le16_to_cpu(rx_desc->wb.middle.vlan));
++ } else {
++ netif_receive_skb(skb);
++ }
+
+- rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+- staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
+- }
+- rx_ring->next_to_clean = i;
++ netdev->last_rx = jiffies;
+
+-#ifdef IEGBE_GBE_WORKAROUND
+- /* Only allocate the number of buffers that we have actually
+- cleaned! */
+- if (cleaned_count) {
+- adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+- }
+-#else
+- adapter->alloc_rx_buf(adapter, rx_ring);
+-#endif
++next_desc:
++ rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
++ buffer_info->skb = NULL;
+
+- return cleaned;
++ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
++ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
++ cleaned_count = 0;
++ }
++
++ /* use prefetched values */
++ rx_desc = next_rxd;
++ buffer_info = next_buffer;
++ staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
++ }
++ rx_ring->next_to_clean = i;
++
++ cleaned_count = E1000_DESC_UNUSED(rx_ring);
++ if (cleaned_count)
++ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
++
++ adapter->total_rx_packets += total_rx_packets;
++ adapter->total_rx_bytes += total_rx_bytes;
++ adapter->net_stats.rx_bytes += total_rx_bytes;
++ adapter->net_stats.rx_packets += total_rx_packets;
++ return cleaned;
+ }
+
+ /**
+@@ -4269,142 +4038,115 @@ next_desc:
+ * @adapter: address of board private structure
+ **/
+
+-#ifdef IEGBE_GBE_WORKAROUND
+-static void
+-iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
++
++static void iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring,
+ int cleaned_count)
+-#else
+-static void
+-iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring)
+-#endif
+ {
+- struct net_device *netdev = adapter->netdev;
+- struct pci_dev *pdev = adapter->pdev;
+- struct iegbe_rx_desc *rx_desc;
+- struct iegbe_buffer *buffer_info;
+- struct sk_buff *skb;
+- unsigned int i;
+- unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+-
+- i = rx_ring->next_to_use;
+- buffer_info = &rx_ring->buffer_info[i];
++ struct iegbe_hw *hw = &adapter->hw;
++ struct net_device *netdev = adapter->netdev;
++ struct pci_dev *pdev = adapter->pdev;
++ struct iegbe_rx_desc *rx_desc;
++ struct iegbe_buffer *buffer_info;
++ struct sk_buff *skb;
++ unsigned int i;
++ unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+
+-#ifdef IEGBE_GBE_WORKAROUND
+- if (cleaned_count > IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS) {
+- adapter->stats.cc_gt_num_rx++;
+- }
+- while(cleaned_count-- && !buffer_info->skb) {
+-#else
+- while(!buffer_info->skb) {
+-#endif
+- skb = dev_alloc_skb(bufsz);
++ i = rx_ring->next_to_use;
++ buffer_info = &rx_ring->buffer_info[i];
+
+- if(unlikely(!skb)) {
+- /* Better luck next round */
+- break;
+- }
++ while (cleaned_count--) {
++ skb = buffer_info->skb;
++ if (skb) {
++ skb_trim(skb, 0);
++ goto map_skb;
++ }
++ skb = netdev_alloc_skb(netdev, bufsz);
++
++ if(unlikely(!skb)) {
++ /* Better luck next round */
++ adapter->alloc_rx_buff_failed++;
++ break;
++ }
+
+- /* Fix for errata 23, can't cross 64kB boundary */
+- if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
+- struct sk_buff *oldskb = skb;
+- DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
+- "at %p\n", bufsz, skb->data);
+- /* Try again, without freeing the previous */
+- skb = dev_alloc_skb(bufsz);
+- /* Failed allocation, critical failure */
+- if(!skb) {
+- dev_kfree_skb(oldskb);
+- break;
+- }
++ /* Fix for errata 23, can't cross 64kB boundary */
++ if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
++ struct sk_buff *oldskb = skb;
++ DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
++ "at %p\n", bufsz, skb->data);
++ /* Try again, without freeing the previous */
++ skb = netdev_alloc_skb(netdev, bufsz);
++ /* Failed allocation, critical failure */
++ if(!skb) {
++ dev_kfree_skb(oldskb);
++ break;
++ }
+
+- if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
+- /* give up */
+- dev_kfree_skb(skb);
+- dev_kfree_skb(oldskb);
+- break; /* while !buffer_info->skb */
+- } else {
+- /* Use new allocation */
+- dev_kfree_skb(oldskb);
++ if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
++ /* give up */
++ dev_kfree_skb(skb);
++ dev_kfree_skb(oldskb);
++ break; /* while !buffer_info->skb */
+ }
+- }
+- /* Make buffer alignment 2 beyond a 16 byte boundary
+- * this will result in a 16 byte aligned IP header after
+- * the 14 byte MAC header is removed
+- */
+- skb_reserve(skb, NET_IP_ALIGN);
+-
+- skb->dev = netdev;
+-
+- buffer_info->skb = skb;
+- buffer_info->length = adapter->rx_buffer_len;
+- buffer_info->dma = pci_map_single(pdev,
+- skb->data,
+- adapter->rx_buffer_len,
+- PCI_DMA_FROMDEVICE);
+-
+- /* Fix for errata 23, can't cross 64kB boundary */
+- if(!iegbe_check_64k_bound(adapter,
+- (void *)(unsigned long)buffer_info->dma,
+- adapter->rx_buffer_len)) {
+- DPRINTK(RX_ERR, ERR,
+- "dma align check failed: %u bytes at %p\n",
+- adapter->rx_buffer_len,
+- (void *)(unsigned long)buffer_info->dma);
+- dev_kfree_skb(skb);
+- buffer_info->skb = NULL;
+-
+- pci_unmap_single(pdev, buffer_info->dma,
+- adapter->rx_buffer_len,
+- PCI_DMA_FROMDEVICE);
+-
+- break; /* while !buffer_info->skb */
+- }
+- rx_desc = E1000_RX_DESC(*rx_ring, i);
+- rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+-
+-#ifdef IEGBE_GBE_WORKAROUND_DISABLED
+- adapter->stats.num_rx_buf_alloc++;
++ /* Use new allocation */
++ dev_kfree_skb(oldskb);
++ }
++ /* Make buffer alignment 2 beyond a 16 byte boundary
++ * this will result in a 16 byte aligned IP header after
++ * the 14 byte MAC header is removed
++ */
++ skb_reserve(skb, NET_IP_ALIGN);
++
++
++ buffer_info->skb = skb;
++ buffer_info->length = adapter->rx_buffer_len;
++map_skb:
++ buffer_info->dma = pci_map_single(pdev,
++ skb->data,
++ adapter->rx_buffer_len,
++ PCI_DMA_FROMDEVICE);
++
++ /* Fix for errata 23, can't cross 64kB boundary */
++ if(!iegbe_check_64k_bound(adapter,
++ (void *)(unsigned long)buffer_info->dma,
++ adapter->rx_buffer_len)) {
++ DPRINTK(RX_ERR, ERR,
++ "dma align check failed: %u bytes at %p\n",
++ adapter->rx_buffer_len,
++ (void *)(unsigned long)buffer_info->dma);
++ dev_kfree_skb(skb);
++ buffer_info->skb = NULL;
++
++ pci_unmap_single(pdev, buffer_info->dma,
++ adapter->rx_buffer_len,
++ PCI_DMA_FROMDEVICE);
+
+- /* Force memory writes to complete before letting h/w
+- * know there are new descriptors to fetch. (Only
+- * applicable for weak-ordered memory model archs,
+- * such as IA-64). */
+- wmb();
+- writel(i, adapter->hw.hw_addr + rx_ring->rdt);
++ break; /* while !buffer_info->skb */
++ }
++ rx_desc = E1000_RX_DESC(*rx_ring, i);
++ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+-#endif
+-#ifndef IEGBE_GBE_WORKAROUND
+- if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 0x1)) == i)) {
+- /* Force memory writes to complete before letting h/w
+- * know there are new descriptors to fetch. (Only
+- * applicable for weak-ordered memory model archs,
+- * such as IA-64). */
+- wmb();
+- writel(i, adapter->hw.hw_addr + rx_ring->rdt);
+- }
+-#endif
+- if(unlikely(++i == rx_ring->count)) { i = 0; }
+- buffer_info = &rx_ring->buffer_info[i];
+- }
++ /* Force memory writes to complete before letting h/w
++ * know there are new descriptors to fetch. (Only
++ * applicable for weak-ordered memory model archs,
++ * such as IA-64). */
++ if (unlikely(++i == rx_ring->count))
++ i = 0;
++ buffer_info = &rx_ring->buffer_info[i];
++ }
+
+-#ifdef IEGBE_GBE_WORKAROUND
+ if (likely(rx_ring->next_to_use != i)) {
+- rx_ring->next_to_use = i;
+- if (unlikely(i-- == 0)) {
+- i = (rx_ring->count - 0x1);
+- }
++ rx_ring->next_to_use = i;
++ if (unlikely(i-- == 0))
++ i = (rx_ring->count - 1);
++
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+- writel(i, adapter->hw.hw_addr + rx_ring->rdt);
++ writel(i, hw->hw_addr + rx_ring->rdt);
+ }
+-#else
+- rx_ring->next_to_use = i;
+-#endif
+ }
+
+ /**
+@@ -4412,49 +4154,41 @@ iegbe_alloc_rx_buffers(struct iegbe_adap
+ * @adapter: address of board private structure
+ **/
+
+-#ifdef IEGBE_GBE_WORKAROUND
+-static void
+-iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
++
++static void iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
+ struct iegbe_rx_ring *rx_ring,
+ int cleaned_count)
+-#else
+-static void
+-iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
+- struct iegbe_rx_ring *rx_ring)
+-#endif
+ {
+- struct net_device *netdev = adapter->netdev;
+- struct pci_dev *pdev = adapter->pdev;
+- union iegbe_rx_desc_packet_split *rx_desc;
+- struct iegbe_buffer *buffer_info;
+- struct iegbe_ps_page *ps_page;
+- struct iegbe_ps_page_dma *ps_page_dma;
+- struct sk_buff *skb;
+- unsigned int i, j;
+-
+- i = rx_ring->next_to_use;
+- buffer_info = &rx_ring->buffer_info[i];
+- ps_page = &rx_ring->ps_page[i];
+- ps_page_dma = &rx_ring->ps_page_dma[i];
++ struct iegbe_hw *hw = &adapter->hw;
++ struct net_device *netdev = adapter->netdev;
++ struct pci_dev *pdev = adapter->pdev;
++ union iegbe_rx_desc_packet_split *rx_desc;
++ struct iegbe_buffer *buffer_info;
++ struct iegbe_ps_page *ps_page;
++ struct iegbe_ps_page_dma *ps_page_dma;
++ struct sk_buff *skb;
++ unsigned int i, j;
++
++ i = rx_ring->next_to_use;
++ buffer_info = &rx_ring->buffer_info[i];
++ ps_page = &rx_ring->ps_page[i];
++ ps_page_dma = &rx_ring->ps_page_dma[i];
+
+-#ifdef IEGBE_GBE_WORKAROUND
+- while(cleaned_count-- && !buffer_info->skb) {
+-#else
+- while(!buffer_info->skb) {
+-#endif
+- rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
++ while (cleaned_count--) {
++ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+
+ for (j = 0; j < PS_PAGE_BUFFERS; j++) {
+- if (j < adapter->rx_ps_pages) {
+- if (likely(!ps_page->ps_page[j])) {
+- ps_page->ps_page[j] =
+- alloc_page(GFP_ATOMIC);
++ if (j < adapter->rx_ps_pages) {
++ if (likely(!ps_page->ps_page[j])) {
++ ps_page->ps_page[j] =
++ alloc_page(GFP_ATOMIC);
+ if (unlikely(!ps_page->ps_page[j])) {
+- goto no_buffers;
++ adapter->alloc_rx_buff_failed++;
++ goto no_buffers;
+ }
+- ps_page_dma->ps_page_dma[j] =
+- pci_map_page(pdev,
+- ps_page->ps_page[j],
++ ps_page_dma->ps_page_dma[j] =
++ pci_map_page(pdev,
++ ps_page->ps_page[j],
+ 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ }
+@@ -4462,26 +4196,26 @@ iegbe_alloc_rx_buffers_ps(struct iegbe_a
+ * change because each write-back erases
+ * this info.
+ */
+- rx_desc->read.buffer_addr[j+0x1] =
++ rx_desc->read.buffer_addr[j+1] =
+ cpu_to_le64(ps_page_dma->ps_page_dma[j]);
+- } else {
+- rx_desc->read.buffer_addr[j+0x1] = ~0;
+- }
++ } else
++ rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
+ }
+
+- skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN);
++ skb = netdev_alloc_skb(netdev,
++ adapter->rx_ps_bsize0 + NET_IP_ALIGN);
+
+- if (unlikely(!skb)) {
++ if (unlikely(!skb)) {
++ adapter->alloc_rx_buff_failed++;
+ break;
+- }
++ }
++
+ /* Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+- skb->dev = netdev;
+-
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_ps_bsize0;
+ buffer_info->dma = pci_map_single(pdev, skb->data,
+@@ -4490,27 +4224,28 @@ iegbe_alloc_rx_buffers_ps(struct iegbe_a
+
+ rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
+
+- if (unlikely((i & ~(E1000_RX_BUFFER_WRITE - 0x1)) == i)) {
+- /* Force memory writes to complete before letting h/w
+- * know there are new descriptors to fetch. (Only
+- * applicable for weak-ordered memory model archs,
+- * such as IA-64). */
+- wmb();
+- /* Hardware increments by 16 bytes, but packet split
+- * descriptors are 32 bytes...so we increment tail
+- * twice as much.
+- */
+- writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
+- }
+-
+- if (unlikely(++i == rx_ring->count)) { i = 0; }
++ if (unlikely(++i == rx_ring->count)) i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ ps_page = &rx_ring->ps_page[i];
+ ps_page_dma = &rx_ring->ps_page_dma[i];
+ }
+
+ no_buffers:
+- rx_ring->next_to_use = i;
++ if (likely(rx_ring->next_to_use != i)) {
++ rx_ring->next_to_use = i;
++ if (unlikely(i-- == 0)) i = (rx_ring->count - 1);
++
++ /* Force memory writes to complete before letting h/w
++ * know there are new descriptors to fetch. (Only
++ * applicable for weak-ordered memory model archs,
++ * such as IA-64). */
++ wmb();
++ /* Hardware increments by 16 bytes, but packet split
++ * descriptors are 32 bytes...so we increment tail
++ * twice as much.
++ */
++ writel(i<<1, hw->hw_addr + rx_ring->rdt);
++ }
+ }
+
+ /**
+@@ -4521,52 +4256,52 @@ no_buffers:
+ static void
+ iegbe_smartspeed(struct iegbe_adapter *adapter)
+ {
+- uint16_t phy_status;
+- uint16_t phy_ctrl;
++ uint16_t phy_status;
++ uint16_t phy_ctrl;
+
+- if((adapter->hw.phy_type != iegbe_phy_igp) || !adapter->hw.autoneg ||
++ if((adapter->hw.phy_type != iegbe_phy_igp) || !adapter->hw.autoneg ||
+ !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL)) {
+- return;
++ return;
+ }
+- if(adapter->smartspeed == 0) {
+- /* If Master/Slave config fault is asserted twice,
+- * we assume back-to-back */
+- iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
++ if(adapter->smartspeed == 0x0) {
++ /* If Master/Slave config fault is asserted twice,
++ * we assume back-to-back */
++ iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
+ if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) { return; }
+- iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
++ iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
+ if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) { return; }
+- iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
+- if(phy_ctrl & CR_1000T_MS_ENABLE) {
+- phy_ctrl &= ~CR_1000T_MS_ENABLE;
+- iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
+- phy_ctrl);
+- adapter->smartspeed++;
+- if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
+- !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL,
+- &phy_ctrl)) {
+- phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+- MII_CR_RESTART_AUTO_NEG);
+- iegbe_write_phy_reg(&adapter->hw, PHY_CTRL,
+- phy_ctrl);
+- }
+- }
+- return;
+- } else if(adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
+- /* If still no link, perhaps using 2/3 pair cable */
+- iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
+- phy_ctrl |= CR_1000T_MS_ENABLE;
+- iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
+- if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
+- !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
+- phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+- MII_CR_RESTART_AUTO_NEG);
+- iegbe_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
+- }
+- }
+- /* Restart process after E1000_SMARTSPEED_MAX iterations */
++ iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
++ if(phy_ctrl & CR_1000T_MS_ENABLE) {
++ phy_ctrl &= ~CR_1000T_MS_ENABLE;
++ iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
++ phy_ctrl);
++ adapter->smartspeed++;
++ if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
++ !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL,
++ &phy_ctrl)) {
++ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
++ MII_CR_RESTART_AUTO_NEG);
++ iegbe_write_phy_reg(&adapter->hw, PHY_CTRL,
++ phy_ctrl);
++ }
++ }
++ return;
++ } else if(adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
++ /* If still no link, perhaps using 2/3 pair cable */
++ iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
++ phy_ctrl |= CR_1000T_MS_ENABLE;
++ iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
++ if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
++ !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
++ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
++ MII_CR_RESTART_AUTO_NEG);
++ iegbe_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
++ }
++ }
++ /* Restart process after E1000_SMARTSPEED_MAX iterations */
+ if(adapter->smartspeed++ == E1000_SMARTSPEED_MAX) {
+- adapter->smartspeed = 0;
+-}
++ adapter->smartspeed = 0x0;
++ }
+ }
+
+ /**
+@@ -4576,23 +4311,22 @@ iegbe_smartspeed(struct iegbe_adapter *a
+ * @cmd:
+ **/
+
+-static int
+-iegbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
++static int iegbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+ {
+- switch (cmd) {
++ switch (cmd) {
+ #ifdef SIOCGMIIPHY
+- case SIOCGMIIPHY:
+- case SIOCGMIIREG:
+- case SIOCSMIIREG:
+- return iegbe_mii_ioctl(netdev, ifr, cmd);
++ case SIOCGMIIPHY:
++ case SIOCGMIIREG:
++ case SIOCSMIIREG:
++ return iegbe_mii_ioctl(netdev, ifr, cmd);
+ #endif
+ #ifdef ETHTOOL_OPS_COMPAT
+- case SIOCETHTOOL:
+- return ethtool_ioctl(ifr);
++ case SIOCETHTOOL:
++ return ethtool_ioctl(ifr);
+ #endif
+- default:
+- return -EOPNOTSUPP;
+- }
++ default:
++ return -EOPNOTSUPP;
++ }
+ }
+
+ #ifdef SIOCGMIIPHY
+@@ -4603,534 +4337,510 @@ iegbe_ioctl(struct net_device *netdev, s
+ * @cmd:
+ **/
+
+-static int
+-iegbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
++static int iegbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
++ int cmd)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- struct mii_ioctl_data *data = if_mii(ifr);
+- int retval;
+- uint16_t mii_reg;
+- uint16_t spddplx;
+- unsigned long flags;
+-
+- if((adapter->hw.media_type == iegbe_media_type_oem &&
+- !iegbe_oem_phy_is_copper(&adapter->hw)) ||
+- adapter->hw.media_type == iegbe_media_type_fiber ||
+- adapter->hw.media_type == iegbe_media_type_internal_serdes ) {
+- return -EOPNOTSUPP;
+- }
+- switch (cmd) {
+- case SIOCGMIIPHY:
+- data->phy_id = adapter->hw.phy_addr;
+- break;
+- case SIOCGMIIREG:
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ struct mii_ioctl_data *data = if_mii(ifr);
++ int retval;
++ uint16_t mii_reg;
++ uint16_t spddplx;
++ unsigned long flags = 0;
++
++ if((adapter->hw.media_type == iegbe_media_type_oem
++ && !iegbe_oem_phy_is_copper(&adapter->hw))
++ ||adapter->hw.media_type != iegbe_media_type_copper) {
++ return -EOPNOTSUPP;
++ }
++ switch (cmd) {
++ case SIOCGMIIPHY:
++ data->phy_id = adapter->hw.phy_addr;
++ break;
++ case SIOCGMIIREG:
+ if(!capable(CAP_NET_ADMIN)) {
+- return -EPERM;
++ return -EPERM;
+ }
+- spin_lock_irqsave(&adapter->stats_lock, flags);
+- if(iegbe_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+- &data->val_out)) {
+- spin_unlock_irqrestore(&adapter->stats_lock, flags);
+- return -EIO;
+- }
+- spin_unlock_irqrestore(&adapter->stats_lock, flags);
+- break;
+- case SIOCSMIIREG:
++ spin_lock_irqsave(&adapter->stats_lock, flags);
++ if(iegbe_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
++ &data->val_out)) {
++ spin_unlock_irqrestore(&adapter->stats_lock, flags);
++ return -EIO;
++ }
++ spin_unlock_irqrestore(&adapter->stats_lock, flags);
++ break;
++ case SIOCSMIIREG:
+ if(!capable(CAP_NET_ADMIN)){
+- return -EPERM;
++ return -EPERM;
+ }
+ if(data->reg_num & ~(0x1F)) {
+- return -EFAULT;
++ return -EFAULT;
+ }
+- mii_reg = data->val_in;
+- spin_lock_irqsave(&adapter->stats_lock, flags);
+- if(iegbe_write_phy_reg(&adapter->hw, data->reg_num,
+- mii_reg)) {
+- spin_unlock_irqrestore(&adapter->stats_lock, flags);
+- return -EIO;
+- }
+- switch(adapter->hw.phy_type) {
+- case iegbe_phy_m88:
+- switch (data->reg_num) {
+- case PHY_CTRL:
++ mii_reg = data->val_in;
++ spin_lock_irqsave(&adapter->stats_lock, flags);
++ if(iegbe_write_phy_reg(&adapter->hw, data->reg_num,
++ mii_reg)) {
++ spin_unlock_irqrestore(&adapter->stats_lock, flags);
++ return -EIO;
++ }
++ switch(adapter->hw.phy_type) {
++ case iegbe_phy_m88:
++ switch (data->reg_num) {
++ case PHY_CTRL:
+ if(mii_reg & MII_CR_POWER_DOWN) {
+- break;
++ break;
+ }
+- if(mii_reg & MII_CR_AUTO_NEG_EN) {
+- adapter->hw.autoneg = 1;
+- adapter->hw.autoneg_advertised = 0x2F;
+- } else {
++ if(mii_reg & MII_CR_AUTO_NEG_EN) {
++ adapter->hw.autoneg = 1;
++ adapter->hw.autoneg_advertised = 0x2F;
++ } else {
+ if(mii_reg & 0x40){
+- spddplx = SPEED_1000;
++ spddplx = SPEED_1000;
+ } else if(mii_reg & 0x2000) {
+- spddplx = SPEED_100;
++ spddplx = SPEED_100;
+ } else {
+- spddplx = SPEED_10;
++ spddplx = SPEED_10;
+ }
+- spddplx += (mii_reg & 0x100)
+- ? FULL_DUPLEX :
+- HALF_DUPLEX;
+- retval = iegbe_set_spd_dplx(adapter,
+- spddplx);
+- if(retval) {
+- spin_unlock_irqrestore(
+- &adapter->stats_lock,
+- flags);
+- return retval;
+- }
+- }
+- if(netif_running(adapter->netdev)) {
+- iegbe_down(adapter);
+- iegbe_up(adapter);
++ spddplx += (mii_reg & 0x100)
++ ? FULL_DUPLEX :
++ HALF_DUPLEX;
++ retval = iegbe_set_spd_dplx(adapter,
++ spddplx);
++ if(retval) {
++ spin_unlock_irqrestore(
++ &adapter->stats_lock,
++ flags);
++ return retval;
++ }
++ }
++ if(netif_running(adapter->netdev)) {
++ iegbe_down(adapter);
++ iegbe_up(adapter);
+ } else {
+- iegbe_reset(adapter);
++ iegbe_reset(adapter);
+ }
+- break;
+- case M88E1000_PHY_SPEC_CTRL:
+- case M88E1000_EXT_PHY_SPEC_CTRL:
+- if(iegbe_phy_reset(&adapter->hw)) {
+- spin_unlock_irqrestore(
+- &adapter->stats_lock, flags);
+- return -EIO;
+- }
+- break;
+- }
+- break;
++ break;
++ case M88E1000_PHY_SPEC_CTRL:
++ case M88E1000_EXT_PHY_SPEC_CTRL:
++ if(iegbe_phy_reset(&adapter->hw)) {
++ spin_unlock_irqrestore(
++ &adapter->stats_lock, flags);
++ return -EIO;
++ }
++ break;
++ }
++ break;
+
+- case iegbe_phy_oem:
+- retval = iegbe_oem_mii_ioctl(adapter, flags, ifr, cmd);
+- if(retval) {
+- spin_unlock_irqrestore(
+- &adapter->stats_lock, flags);
+- return retval;
+- }
+- break;
++ case iegbe_phy_oem:
++ retval = iegbe_oem_mii_ioctl(adapter, flags, ifr, cmd);
++ if(retval) {
++ spin_unlock_irqrestore(
++ &adapter->stats_lock, flags);
++ return retval;
++ }
++ break;
+
+- default:
+- switch (data->reg_num) {
+- case PHY_CTRL:
++ default:
++ switch (data->reg_num) {
++ case PHY_CTRL:
+ if(mii_reg & MII_CR_POWER_DOWN) {
+- break;
++ break;
+ }
+- if(netif_running(adapter->netdev)) {
+- iegbe_down(adapter);
+- iegbe_up(adapter);
++ if(netif_running(adapter->netdev)) {
++ iegbe_down(adapter);
++ iegbe_up(adapter);
+ } else {
+- iegbe_reset(adapter);
++ iegbe_reset(adapter);
+ }
+- break;
+- }
+- }
+- spin_unlock_irqrestore(&adapter->stats_lock, flags);
+- break;
+- default:
+- return -EOPNOTSUPP;
+- }
+- return E1000_SUCCESS;
++ break;
++ }
++ }
++ spin_unlock_irqrestore(&adapter->stats_lock, flags);
++ break;
++ default:
++ return -EOPNOTSUPP;
++ }
++ return E1000_SUCCESS;
+ }
+ #endif
+
+-void
+-iegbe_pci_set_mwi(struct iegbe_hw *hw)
++void iegbe_pci_set_mwi(struct iegbe_hw *hw)
+ {
+- struct iegbe_adapter *adapter = hw->back;
+-#ifdef HAVE_PCI_SET_MWI
+- int ret_val = pci_set_mwi(adapter->pdev);
+-
+- if(ret_val) {
+- DPRINTK(PROBE, ERR, "Error in setting MWI\n");
+- }
+-#else
+- pci_write_config_word(adapter->pdev, PCI_COMMAND,
+- adapter->hw.pci_cmd_word |
+- PCI_COMMAND_INVALIDATE);
+-#endif
++ struct iegbe_adapter *adapter = hw->back;
++ int ret_val = pci_set_mwi(adapter->pdev);
++
++ if (ret_val)
++ DPRINTK(PROBE, ERR, "Error in setting MWI\n");
+ }
+
+-void
+-iegbe_pci_clear_mwi(struct iegbe_hw *hw)
++void iegbe_pci_clear_mwi(struct iegbe_hw *hw)
+ {
+- struct iegbe_adapter *adapter = hw->back;
++ struct iegbe_adapter *adapter = hw->back;
+
+-#ifdef HAVE_PCI_SET_MWI
+- pci_clear_mwi(adapter->pdev);
+-#else
+- pci_write_config_word(adapter->pdev, PCI_COMMAND,
+- adapter->hw.pci_cmd_word &
+- ~PCI_COMMAND_INVALIDATE);
+-#endif
++ pci_clear_mwi(adapter->pdev);
+ }
+
+ void
+ iegbe_read_pci_cfg(struct iegbe_hw *hw, uint32_t reg, uint16_t *value)
+ {
+- struct iegbe_adapter *adapter = hw->back;
++ struct iegbe_adapter *adapter = hw->back;
+
+- pci_read_config_word(adapter->pdev, reg, value);
++ pci_read_config_word(adapter->pdev, reg, value);
+ }
+
+ void
+ iegbe_write_pci_cfg(struct iegbe_hw *hw, uint32_t reg, uint16_t *value)
+ {
+- struct iegbe_adapter *adapter = hw->back;
++ struct iegbe_adapter *adapter = hw->back;
+
+- pci_write_config_word(adapter->pdev, reg, *value);
++ pci_write_config_word(adapter->pdev, reg, *value);
+ }
+
+ uint32_t
+ iegbe_io_read(struct iegbe_hw *hw, unsigned long port)
+ {
+- return inl(port);
++ return inl(port);
+ }
+
+ void
+ iegbe_io_write(struct iegbe_hw *hw, unsigned long port, uint32_t value)
+ {
+- outl(value, port);
++ outl(value, port);
+ }
+
+-#ifdef NETIF_F_HW_VLAN_TX
+-static void
+-iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
++static void iegbe_vlan_rx_register(struct net_device *netdev,
++ struct vlan_group *grp)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- uint32_t ctrl, rctl;
+-
+- iegbe_irq_disable(adapter);
+- adapter->vlgrp = grp;
+-
+- if(grp) {
+- /* enable VLAN tag insert/strip */
+- ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+- ctrl |= E1000_CTRL_VME;
+- E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+-
+- /* enable VLAN receive filtering */
+- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+- rctl |= E1000_RCTL_VFE;
+- rctl &= ~E1000_RCTL_CFIEN;
+- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+- iegbe_update_mng_vlan(adapter);
+- } else {
+- /* disable VLAN tag insert/strip */
+- ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+- ctrl &= ~E1000_CTRL_VME;
+- E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ uint32_t ctrl, rctl;
+
+- /* disable VLAN filtering */
+- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+- rctl &= ~E1000_RCTL_VFE;
+- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+- if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
+- iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+- }
+- }
++ if (!test_bit(__E1000_DOWN, &adapter->flags))
++ iegbe_irq_disable(adapter);
++ adapter->vlgrp = grp;
++
++ if(grp) {
++ /* enable VLAN tag insert/strip */
++ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
++ ctrl |= E1000_CTRL_VME;
++ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
++
++ /* enable VLAN receive filtering */
++ rctl = E1000_READ_REG(&adapter->hw, RCTL);
++ rctl |= E1000_RCTL_VFE;
++ rctl &= ~E1000_RCTL_CFIEN;
++ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
++ iegbe_update_mng_vlan(adapter);
++ } else {
++ /* disable VLAN tag insert/strip */
++ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
++ ctrl &= ~E1000_CTRL_VME;
++ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
++
++ /* disable VLAN filtering */
++ rctl = E1000_READ_REG(&adapter->hw, RCTL);
++ rctl &= ~E1000_RCTL_VFE;
++ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
++ if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
++ iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
++ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
++ }
++ }
+
+- iegbe_irq_enable(adapter);
++ if (!test_bit(__E1000_DOWN, &adapter->flags))
++ iegbe_irq_enable(adapter);
+ }
+
+-static void
+-iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
++static void iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- uint32_t vfta, index;
+- if((adapter->hw.mng_cookie.status &
+- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ uint32_t vfta, index;
++ if((adapter->hw.mng_cookie.status &
++ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id)) {
+- return;
++ return;
+ }
+- /* add VID to filter table */
++ /* add VID to filter table */
+ index = (vid >> 0x5) & 0x7F;
+- vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
++ vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+ vfta |= (0x1 << (vid & 0x1F));
+- iegbe_write_vfta(&adapter->hw, index, vfta);
++ iegbe_write_vfta(&adapter->hw, index, vfta);
+ }
+
+-static void
+-iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
++static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+ {
+ struct iegbe_adapter *adapter = netdev_priv(netdev);
+- uint32_t vfta, index;
++ u32 vfta, index;
+
++ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ iegbe_irq_disable(adapter);
+-
+- if(adapter->vlgrp) {
+- adapter->vlgrp->vlan_devices[vid] = NULL;
+- }
++ vlan_group_set_device(adapter->vlgrp, vid, NULL);
++ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ iegbe_irq_enable(adapter);
+
+- if((adapter->hw.mng_cookie.status &
+- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+- (vid == adapter->mng_vlan_id)) {
+- return;
+- }
+ /* remove VID from filter table */
+- index = (vid >> 0x5) & 0x7F;
++ index = (vid >> 0x5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+- vfta &= ~(0x1 << (vid & 0x1F));
++ vfta &= ~(0x1 << (vid & 0x1F));
+ iegbe_write_vfta(&adapter->hw, index, vfta);
+ }
+
+-static void
+-iegbe_restore_vlan(struct iegbe_adapter *adapter)
++static void iegbe_restore_vlan(struct iegbe_adapter *adapter)
+ {
+ iegbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+
+- if(adapter->vlgrp) {
+- uint16_t vid;
+- for(vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+- if(!adapter->vlgrp->vlan_devices[vid]) {
++ if (adapter->vlgrp) {
++ u16 vid;
++ for (vid = 0x0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
++ if (!vlan_group_get_device(adapter->vlgrp, vid))
+ continue;
+- }
+ iegbe_vlan_rx_add_vid(adapter->netdev, vid);
+ }
+ }
+ }
+-#endif
+
+-int
+-iegbe_set_spd_dplx(struct iegbe_adapter *adapter, uint16_t spddplx)
++
++int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, u16 spddplx)
+ {
+- adapter->hw.autoneg = 0;
++ adapter->hw.autoneg = 0x0;
+
+- /* Fiber NICs only allow 1000 gbps Full duplex */
+- if((adapter->hw.media_type == iegbe_media_type_fiber
++ /* Fiber NICs only allow 1000 gbps Full duplex */
++ if((adapter->hw.media_type == iegbe_media_type_fiber
+ || (adapter->hw.media_type == iegbe_media_type_oem
+ && !iegbe_oem_phy_is_copper(&adapter->hw)))
+- && spddplx != (SPEED_1000 + FULL_DUPLEX)) {
+- DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+- return -EINVAL;
+- }
+-
+- switch(spddplx) {
+- case SPEED_10 + HALF_DUPLEX:
+- adapter->hw.forced_speed_duplex = iegbe_10_half;
+- break;
+- case SPEED_10 + FULL_DUPLEX:
+- adapter->hw.forced_speed_duplex = iegbe_10_full;
+- break;
+- case SPEED_100 + HALF_DUPLEX:
+- adapter->hw.forced_speed_duplex = iegbe_100_half;
+- break;
+- case SPEED_100 + FULL_DUPLEX:
+- adapter->hw.forced_speed_duplex = iegbe_100_full;
+- break;
+- case SPEED_1000 + FULL_DUPLEX:
++ && spddplx != (SPEED_1000 + DUPLEX_FULL)) {
++ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
++ return -EINVAL;
++ }
++
++ switch(spddplx) {
++ case SPEED_10 + DUPLEX_HALF:
++ adapter->hw.forced_speed_duplex = iegbe_10_half;
++ break;
++ case SPEED_10 + DUPLEX_FULL:
++ adapter->hw.forced_speed_duplex = iegbe_10_full;
++ break;
++ case SPEED_100 + DUPLEX_HALF:
++ adapter->hw.forced_speed_duplex = iegbe_100_half;
++ break;
++ case SPEED_100 + DUPLEX_FULL:
++ adapter->hw.forced_speed_duplex = iegbe_100_full;
++ break;
++ case SPEED_1000 + DUPLEX_FULL:
+ adapter->hw.autoneg = 0x1;
+- adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
+- break;
+- case SPEED_1000 + HALF_DUPLEX: /* not supported */
+- default:
+- DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+- return -EINVAL;
+- }
+- return 0;
++ adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
++ break;
++ case SPEED_1000 + DUPLEX_HALF: /* not supported */
++ default:
++ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
++ return -EINVAL;
++ }
++ return 0x0;
+ }
+
+ static int
+ iegbe_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
+ {
+- struct pci_dev *pdev = NULL;
++ struct pci_dev *pdev = NULL;
+ pm_message_t state = {0x3};
+
+
+- switch(event) {
+- case SYS_DOWN:
+- case SYS_HALT:
+- case SYS_POWER_OFF:
+- while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
++ switch(event) {
++ case SYS_DOWN:
++ case SYS_HALT:
++ case SYS_POWER_OFF:
++ while((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
+ if(pci_dev_driver(pdev) == &iegbe_driver) {
+- iegbe_suspend(pdev, state);
+- }
+- }
++ iegbe_suspend(pdev, state);
++ }
++ }
+ }
+- return NOTIFY_DONE;
++ return NOTIFY_DONE;
+ }
+
+ static int
+ iegbe_suspend(struct pci_dev *pdev, pm_message_t state)
+ {
+- struct net_device *netdev = pci_get_drvdata(pdev);
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm;
+- uint32_t wufc = adapter->wol;
+- uint16_t cmd_word;
++ struct net_device *netdev = pci_get_drvdata(pdev);
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm;
++ uint32_t wufc = adapter->wol;
++ uint16_t cmd_word;
+
+- netif_device_detach(netdev);
++ netif_device_detach(netdev);
+
+ if(netif_running(netdev)) {
+- iegbe_down(adapter);
++ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
++ iegbe_down(adapter);
+ }
+- /*
+- * ICP_XXXX style MACs do not have a link up bit in
+- * the STATUS register, query the PHY directly
+- */
+- if(adapter->hw.mac_type != iegbe_icp_xxxx) {
+- status = E1000_READ_REG(&adapter->hw, STATUS);
++ /*
++ * ICP_XXXX style MACs do not have a link up bit in
++ * the STATUS register, query the PHY directly
++ */
++ if(adapter->hw.mac_type != iegbe_icp_xxxx) {
++ status = E1000_READ_REG(&adapter->hw, STATUS);
+ if(status & E1000_STATUS_LU) {
+- wufc &= ~E1000_WUFC_LNKC;
++ wufc &= ~E1000_WUFC_LNKC;
+ }
+- } else {
+- int isUp = 0;
++ } else {
++ int isUp = 0x0;
+ if(iegbe_oem_phy_is_link_up(&adapter->hw, &isUp) != E1000_SUCCESS) {
+- isUp = 0;
++ isUp = 0x0;
+ }
+ if(isUp) {
+- wufc &= ~E1000_WUFC_LNKC;
+- }
++ wufc &= ~E1000_WUFC_LNKC;
++ }
+ }
+
+- if(wufc) {
+- iegbe_setup_rctl(adapter);
+- iegbe_set_multi(netdev);
+-
+- /* turn on all-multi mode if wake on multicast is enabled */
+- if(adapter->wol & E1000_WUFC_MC) {
+- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+- rctl |= E1000_RCTL_MPE;
+- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+- }
++ if(wufc) {
++ iegbe_setup_rctl(adapter);
++ iegbe_set_rx_mode(netdev);
++
++ /* turn on all-multi mode if wake on multicast is enabled */
++ if(adapter->wol & E1000_WUFC_MC) {
++ rctl = E1000_READ_REG(&adapter->hw, RCTL);
++ rctl |= E1000_RCTL_MPE;
++ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
++ }
+
+- if(adapter->hw.mac_type >= iegbe_82540) {
+- ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+- /* advertise wake from D3Cold */
+- #define E1000_CTRL_ADVD3WUC 0x00100000
+- /* phy power management enable */
+- ctrl |= E1000_CTRL_ADVD3WUC |
+- (adapter->hw.mac_type != iegbe_icp_xxxx
+- ? E1000_CTRL_EN_PHY_PWR_MGMT : 0);
++ if(adapter->hw.mac_type >= iegbe_82540) {
++ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
++ /* advertise wake from D3Cold */
++ #define E1000_CTRL_ADVD3WUC 0x00100000
++ /* phy power management enable */
++ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
++ ctrl |= E1000_CTRL_ADVD3WUC |
++ (adapter->hw.mac_type != iegbe_icp_xxxx
++ ? E1000_CTRL_EN_PHY_PWR_MGMT : 0x0);
+
+- E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+- }
++ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
++ }
+
+- if(adapter->hw.media_type == iegbe_media_type_fiber ||
+- adapter->hw.media_type == iegbe_media_type_internal_serdes) {
+- /* keep the laser running in D3 */
+- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+- ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
+- E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
+- }
++ if(adapter->hw.media_type == iegbe_media_type_fiber ||
++ adapter->hw.media_type == iegbe_media_type_internal_serdes) {
++ /* keep the laser running in D3 */
++ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
++ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
++ E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
++ }
+
+ /* Allow OEM PHYs (if any exist) to keep the laser
+ *running in D3 */
+ iegbe_oem_fiber_live_in_suspend(&adapter->hw);
+
+- /* Allow time for pending master requests to run */
+- iegbe_disable_pciex_master(&adapter->hw);
++ /* Allow time for pending master requests to run */
++ iegbe_disable_pciex_master(&adapter->hw);
+
+- E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
+- E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
++ E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
++ E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
+ pci_enable_wake(pdev, 0x3, 0x1);
+ pci_enable_wake(pdev, 0x4, 0x1); /* 4 == D3 cold */
+- } else {
+- E1000_WRITE_REG(&adapter->hw, WUC, 0);
+- E1000_WRITE_REG(&adapter->hw, WUFC, 0);
+- pci_enable_wake(pdev, 0x3, 0);
+- pci_enable_wake(pdev, 0x4, 0); /* 4 == D3 cold */
+- }
++ } else {
++ E1000_WRITE_REG(&adapter->hw, WUC, 0x0);
++ E1000_WRITE_REG(&adapter->hw, WUFC, 0x0);
++ pci_enable_wake(pdev, 0x3, 0x0);
++ pci_enable_wake(pdev, 0x4, 0x0); /* 4 == D3 cold */
++ }
+
+- pci_save_state(pdev);
+-
+- if(adapter->hw.mac_type >= iegbe_82540
+- && adapter->hw.mac_type != iegbe_icp_xxxx
+- && adapter->hw.media_type == iegbe_media_type_copper) {
+- manc = E1000_READ_REG(&adapter->hw, MANC);
+- if(manc & E1000_MANC_SMBUS_EN) {
+- manc |= E1000_MANC_ARP_EN;
+- E1000_WRITE_REG(&adapter->hw, MANC, manc);
++ pci_save_state(pdev);
++
++ if(adapter->hw.mac_type >= iegbe_82540
++ && adapter->hw.mac_type != iegbe_icp_xxxx
++ && adapter->hw.media_type == iegbe_media_type_copper) {
++ manc = E1000_READ_REG(&adapter->hw, MANC);
++ if(manc & E1000_MANC_SMBUS_EN) {
++ manc |= E1000_MANC_ARP_EN;
++ E1000_WRITE_REG(&adapter->hw, MANC, manc);
+ pci_enable_wake(pdev, 0x3, 0x1);
+ pci_enable_wake(pdev, 0x4, 0x1); /* 4 == D3 cold */
+- }
+- }
++ }
++ }
+
+- switch(adapter->hw.mac_type) {
+- case iegbe_82571:
+- case iegbe_82572:
+- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+- ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+- break;
+- case iegbe_82573:
+- swsm = E1000_READ_REG(&adapter->hw, SWSM);
+- E1000_WRITE_REG(&adapter->hw, SWSM,
+- swsm & ~E1000_SWSM_DRV_LOAD);
+- break;
+- default:
+- break;
+- }
++ switch(adapter->hw.mac_type) {
++ case iegbe_82571:
++ case iegbe_82572:
++ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
++ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
++ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
++ break;
++ case iegbe_82573:
++ swsm = E1000_READ_REG(&adapter->hw, SWSM);
++ E1000_WRITE_REG(&adapter->hw, SWSM,
++ swsm & ~E1000_SWSM_DRV_LOAD);
++ break;
++ default:
++ break;
++ }
+
+- pci_disable_device(pdev);
+- if(adapter->hw.mac_type == iegbe_icp_xxxx) {
+- /*
+- * ICP xxxx devices are not true PCI devices, in the context
+- * of power management, disabling the bus mastership is not
+- * sufficient to disable the device, it is also necessary to
+- * disable IO, Memory, and Interrupts if they are enabled.
+- */
+- pci_read_config_word(pdev, PCI_COMMAND, &cmd_word);
++ pci_disable_device(pdev);
++ if(adapter->hw.mac_type == iegbe_icp_xxxx) {
++ /*
++ * ICP xxxx devices are not true PCI devices, in the context
++ * of power management, disabling the bus mastership is not
++ * sufficient to disable the device, it is also necessary to
++ * disable IO, Memory, and Interrupts if they are enabled.
++ */
++ pci_read_config_word(pdev, PCI_COMMAND, &cmd_word);
+ if(cmd_word & PCI_COMMAND_IO) {
+- cmd_word &= ~PCI_COMMAND_IO;
++ cmd_word &= ~PCI_COMMAND_IO;
+ }
+ if(cmd_word & PCI_COMMAND_MEMORY) {
+- cmd_word &= ~PCI_COMMAND_MEMORY;
++ cmd_word &= ~PCI_COMMAND_MEMORY;
+ }
+ if(cmd_word & PCI_COMMAND_INTX_DISABLE) {
+- cmd_word &= ~PCI_COMMAND_INTX_DISABLE;
++ cmd_word &= ~PCI_COMMAND_INTX_DISABLE;
+ }
+- pci_write_config_word(pdev, PCI_COMMAND, cmd_word);
+- }
++ pci_write_config_word(pdev, PCI_COMMAND, cmd_word);
++ }
+
+- state.event = (state.event > 0) ? 0x3 : 0;
+- pci_set_power_state(pdev, state.event);
+- if(gcu_suspend == 0)
++ state.event = (state.event > 0x0) ? 0x3 : 0x0;
++ pci_set_power_state(pdev, state.event);
++ if(gcu_suspend == 0x0)
+ {
+ if(gcu == NULL) {
+- gcu = pci_find_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
+- }
++ gcu = pci_get_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
++ }
+ gcu_iegbe_suspend(gcu, 0x3);
+- gcu_suspend = 1;
+- gcu_resume = 0;
++ gcu_suspend = 0x1;
++ gcu_resume = 0x0;
+ }
+- return 0;
++ return 0x0;
+ }
+
+ #ifdef CONFIG_PM
+ static int
+ iegbe_resume(struct pci_dev *pdev)
+ {
+- struct net_device *netdev = pci_get_drvdata(pdev);
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- uint32_t manc, ret_val, swsm;
+- uint32_t ctrl_ext;
++ struct net_device *netdev = pci_get_drvdata(pdev);
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ uint32_t manc, ret_val, swsm;
++ uint32_t ctrl_ext;
+ int offset;
+ uint32_t vdid;
+
+- if(gcu_resume == 0)
++ if(gcu_resume == 0x0)
+ {
+ if(gcu == NULL) {
+- gcu = pci_find_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
++ gcu = pci_get_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
+ pci_read_config_dword(gcu, 0x00, &vdid);
+- }
+-
++ }
++
+ if(gcu) {
+ gcu_iegbe_resume(gcu);
+- gcu_resume = 1;
+- gcu_suspend = 0;
++ gcu_resume = 0x1;
++ gcu_suspend = 0x0;
+ } else {
+ printk("Unable to resume GCU!\n");
+- }
++ }
+ }
+ pci_set_power_state(pdev, 0x0);
+- pci_restore_state(pdev);
+- ret_val = pci_enable_device(pdev);
+- pci_set_master(pdev);
++ pci_restore_state(pdev);
++ ret_val = pci_enable_device(pdev);
++ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, 0x3, 0x0);
+ pci_enable_wake(pdev, 0x4, 0x0); /* 4 == D3 cold */
+
+- iegbe_reset(adapter);
+- E1000_WRITE_REG(&adapter->hw, WUS, ~0);
++ iegbe_reset(adapter);
++ E1000_WRITE_REG(&adapter->hw, WUS, ~0);
+ offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_ST)
+ + PCI_ST_SMIA_OFFSET;
+ pci_write_config_dword(adapter->pdev, offset, 0x00000006);
+@@ -5138,51 +4848,52 @@ iegbe_resume(struct pci_dev *pdev)
+ E1000_WRITE_REG(&adapter->hw, IMC2, ~0UL);
+
+ if(netif_running(netdev)) {
+- iegbe_up(adapter);
++ iegbe_up(adapter);
+ }
+- netif_device_attach(netdev);
+-
+- if(adapter->hw.mac_type >= iegbe_82540
+- && adapter->hw.mac_type != iegbe_icp_xxxx
+- && adapter->hw.media_type == iegbe_media_type_copper) {
+- manc = E1000_READ_REG(&adapter->hw, MANC);
+- manc &= ~(E1000_MANC_ARP_EN);
+- E1000_WRITE_REG(&adapter->hw, MANC, manc);
+- }
++ netif_device_attach(netdev);
+
+- switch(adapter->hw.mac_type) {
+- case iegbe_82571:
+- case iegbe_82572:
+- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+- ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+- break;
+- case iegbe_82573:
+- swsm = E1000_READ_REG(&adapter->hw, SWSM);
+- E1000_WRITE_REG(&adapter->hw, SWSM,
+- swsm | E1000_SWSM_DRV_LOAD);
+- break;
+- default:
+- break;
+- }
++ if(adapter->hw.mac_type >= iegbe_82540
++ && adapter->hw.mac_type != iegbe_icp_xxxx
++ && adapter->hw.media_type == iegbe_media_type_copper) {
++ manc = E1000_READ_REG(&adapter->hw, MANC);
++ manc &= ~(E1000_MANC_ARP_EN);
++ E1000_WRITE_REG(&adapter->hw, MANC, manc);
++ }
++
++ switch(adapter->hw.mac_type) {
++ case iegbe_82571:
++ case iegbe_82572:
++ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
++ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
++ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
++ break;
++ case iegbe_82573:
++ swsm = E1000_READ_REG(&adapter->hw, SWSM);
++ E1000_WRITE_REG(&adapter->hw, SWSM,
++ swsm | E1000_SWSM_DRV_LOAD);
++ break;
++ default:
++ break;
++ }
++#endif
+
+- return 0;
++ return 0x0;
+ }
+-#endif
++
+ #ifdef CONFIG_NET_POLL_CONTROLLER
+ /*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+-static void
+-iegbe_netpoll(struct net_device *netdev)
++static void iegbe_netpoll(struct net_device *netdev)
+ {
+- struct iegbe_adapter *adapter = netdev_priv(netdev);
+- disable_irq(adapter->pdev->irq);
+- iegbe_intr(adapter->pdev->irq, netdev, NULL);
+- enable_irq(adapter->pdev->irq);
++ struct iegbe_adapter *adapter = netdev_priv(netdev);
++ disable_irq(adapter->pdev->irq);
++ iegbe_intr(adapter->pdev->irq, netdev);
++ enable_irq(adapter->pdev->irq);
+ }
+ #endif
+
++
+ /* iegbe_main.c */
+--- a/Embedded/src/GbE/iegbe_oem_phy.c
++++ b/Embedded/src/GbE/iegbe_oem_phy.c
+@@ -2,31 +2,31 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+- This program is free software; you can redistribute it and/or modify
++ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+- This program is distributed in the hope that it will be useful, but
+- WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ This program is distributed in the hope that it will be useful, but
++ WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+- The full GNU General Public License is included in this distribution
++ The full GNU General Public License is included in this distribution
+ in the file called LICENSE.GPL.
+
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+- Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
++ Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
+
+ *****************************************************************************/
+ /**************************************************************************
+@@ -65,11 +65,6 @@ static int32_t iegbe_oem_link_m88_setup(
+ static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
+ static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
+
+-/* Define specific BCM functions */
+-static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
+-static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
+-static int32_t oi_phy_setup (struct iegbe_hw *hw);
+-
+ /**
+ * iegbe_oem_setup_link
+ * @hw: iegbe_hw struct containing device specific information
+@@ -84,7 +79,7 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+ {
+ #ifdef EXTERNAL_MDIO
+
+- /*
++ /*
+ * see iegbe_setup_copper_link() as the primary example. Look at both
+ * the M88 and IGP functions that are called for ideas, possibly for
+ * power management.
+@@ -102,14 +97,14 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+ }
+ /* AFU: add test to exit out if improper phy type
+ */
+- /* relevent parts of iegbe_copper_link_preconfig */
+- ctrl = E1000_READ_REG(hw, CTRL);
+- ctrl |= E1000_CTRL_SLU;
+- ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+- E1000_WRITE_REG(hw, CTRL, ctrl);
+-
++ /* relevent parts of iegbe_copper_link_preconfig */
++ ctrl = E1000_READ_REG(hw, CTRL);
++ ctrl |= E1000_CTRL_SLU;
++ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
++ E1000_WRITE_REG(hw, CTRL, ctrl);
++
+ /* this is required for *hw init */
+- ret_val = iegbe_oem_detect_phy(hw);
++ ret_val = iegbe_oem_detect_phy(hw);
+ if(ret_val) {
+ return ret_val;
+ }
+@@ -119,23 +114,13 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+ }
+
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- return E1000_SUCCESS;
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ ret_val = iegbe_oem_link_m88_setup(hw);
+- if(ret_val) {
+- return ret_val;
+- }
+- break;
+- case BCM5481_PHY_ID:
+- ret_val = iegbe_oem_link_bcm5481_setup(hw);
+- if(ret_val) {
+- return ret_val;
++ if(ret_val) {
++ return ret_val;
+ }
+- break;
++ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+ return -E1000_ERR_PHY_TYPE;
+@@ -143,16 +128,16 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+
+ if(hw->autoneg) {
+ ret_val = iegbe_copper_link_autoneg(hw);
+- if(ret_val) {
+- return ret_val;
+- }
++ if(ret_val) {
++ return ret_val;
+ }
++ }
+ else {
+ DEBUGOUT("Forcing speed and duplex\n");
+ ret_val = iegbe_phy_force_speed_duplex(hw);
+ }
+-
+- /*
++
++ /*
+ * Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+@@ -194,51 +179,6 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+ #endif /* ifdef EXTERNAL_MDIO */
+ }
+
+-/**
+- * iegbe_oem_link_bcm5481_setup
+- * @hw: iegbe_hw struct containing device specific information
+- *
+- * Returns E1000_SUCCESS, negative E1000 error code on failure
+- *
+- * copied verbatim from iegbe_oem_link_m88_setup
+- **/
+-static int32_t
+-iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
+-{
+- int32_t ret_val;
+- uint16_t phy_data;
+-
+- //DEBUGFUNC(__func__);
+-
+- if(!hw)
+- return -1;
+-
+- /* phy_reset_disable is set in iegbe_oem_set_phy_mode */
+- if(hw->phy_reset_disable)
+- return E1000_SUCCESS;
+-
+- // Enable MDIX in extended control reg.
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
+- if(ret_val)
+- {
+- DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
+- return ret_val;
+- }
+-
+- phy_data &= ~BCM5481_ECTRL_DISMDIX;
+- ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
+- if(ret_val)
+- {
+- DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
+- return ret_val;
+- }
+-
+- ret_val = oi_phy_setup (hw);
+- if (ret_val)
+- return ret_val;
+-
+- return E1000_SUCCESS;
+-}
+
+ /**
+ * iegbe_oem_link_m88_setup
+@@ -253,7 +193,7 @@ static int32_t
+ iegbe_oem_link_m88_setup(struct iegbe_hw *hw)
+ {
+ int32_t ret_val;
+- uint16_t phy_data;
++ uint16_t phy_data = 0;
+
+ DEBUGFUNC1("%s",__func__);
+
+@@ -261,7 +201,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
+ return -1;
+ }
+
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ phy_data |= 0x00000008;
+ ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+@@ -279,7 +219,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
+
+ phy_data &= ~M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+- /*
++ /*
+ * Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+@@ -305,7 +245,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
+ break;
+ }
+
+- /*
++ /*
+ * Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+@@ -316,25 +256,25 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
+
+ if(hw->disable_polarity_correction == 1) {
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+- }
++ }
+ ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to write M88E1000_PHY_SPEC_CTRL register\n");
+ return ret_val;
+ }
+
+- /*
++ /*
+ * Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read M88E1000_EXT_PHY_SPEC_CTRL register\n");
+ return ret_val;
+ }
+
+- /*
++ /*
+ * For Truxton, it is necessary to add RGMII tx and rx
+ * timing delay though the EXT_PHY_SPEC_CTRL register
+ */
+@@ -350,13 +290,13 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ }
+- ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
++ ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read M88E1000_EXT_PHY_SPEC_CTRL register\n");
+ return ret_val;
+ }
+-
++
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = iegbe_phy_hw_reset(hw);
+@@ -371,7 +311,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
+ /**
+ * iegbe_oem_force_mdi
+ * @hw: iegbe_hw struct containing device specific information
+- * @resetPhy: returns true if after calling this function the
++ * @resetPhy: returns true if after calling this function the
+ * PHY requires a reset
+ *
+ * Returns E1000_SUCCESS, negative E1000 error code on failure
+@@ -379,7 +319,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
+ * This is called from iegbe_phy_force_speed_duplex, which is
+ * called from iegbe_oem_setup_link.
+ **/
+-int32_t
++int32_t
+ iegbe_oem_force_mdi(struct iegbe_hw *hw, int *resetPhy)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -393,35 +333,30 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
+ return -1;
+ }
+
+- /*
++ /*
+ * a boolean to indicate if the phy needs to be reset
+- *
++ *
+ * Make note that the M88 phy is what'll be used on Truxton
+ * see iegbe_phy_force_speed_duplex, which does the following for M88
+ */
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- case BCM5481_PHY_ID:
+- DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- ret_val = iegbe_oem_read_phy_reg_ex(hw,
+- M88E1000_PHY_SPEC_CTRL,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw,
++ M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read M88E1000_PHY_SPEC_CTRL register\n");
+ return ret_val;
+ }
+-
++
+ /*
+- * Clear Auto-Crossover to force MDI manually. M88E1000 requires
++ * Clear Auto-Crossover to force MDI manually. M88E1000 requires
+ * MDI forced whenever speed are duplex are forced.
+ */
+-
++
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+- ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
++ ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
+ phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to write M88E1000_PHY_SPEC_CTRL register\n");
+@@ -458,7 +393,7 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
+ * This is called from iegbe_phy_force_speed_duplex, which is
+ * called from iegbe_oem_setup_link.
+ **/
+-int32_t
++int32_t
+ iegbe_oem_phy_reset_dsp(struct iegbe_hw *hw)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -478,10 +413,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
+ * no-op.
+ */
+ switch (hw->phy_id) {
+- case M88E1000_I_PHY_ID:
+- case M88E1141_E_PHY_ID:
+- case BCM5481_PHY_ID:
+- case BCM5395S_PHY_ID:
++ case M88E1000_I_PHY_ID:
++ case M88E1141_E_PHY_ID:
+ DEBUGOUT("No DSP to reset on OEM PHY\n");
+ break;
+ default:
+@@ -508,7 +441,7 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
+ * This is called from iegbe_phy_force_speed_duplex, which is
+ * called from iegbe_oem_setup_link.
+ **/
+-int32_t
++int32_t
+ iegbe_oem_cleanup_after_phy_reset(struct iegbe_hw *hw)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -520,29 +453,24 @@ iegbe_oem_cleanup_after_phy_reset(struct
+
+ if(!hw) {
+ return -1;
+- }
++ }
+
+- /*
++ /*
+ * Make note that the M88 phy is what'll be used on Truxton.
+ * see iegbe_phy_force_speed_duplex, which does the following for M88
+ */
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- case BCM5481_PHY_ID:
+- DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ /*
+- * Because we reset the PHY above, we need to re-force
++ * Because we reset the PHY above, we need to re-force
+ * TX_CLK in the Extended PHY Specific Control Register to
+ * 25MHz clock. This value defaults back to a 2.5MHz clock
+ * when the PHY is reset.
+ */
+
+ ret_val = iegbe_oem_read_phy_reg_ex(hw,
+- M88E1000_EXT_PHY_SPEC_CTRL,
++ M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read M88E1000_EXT_SPEC_CTRL register\n");
+@@ -550,22 +478,23 @@ iegbe_oem_cleanup_after_phy_reset(struct
+ }
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+- ret_val = iegbe_oem_write_phy_reg_ex(hw,
+- M88E1000_EXT_PHY_SPEC_CTRL,
++ ret_val = iegbe_oem_write_phy_reg_ex(hw,
++ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if(ret_val) {
+- DEBUGOUT("Unable to write M88E1000_EXT_PHY_SPEC_CTRL register\n");
++ DEBUGOUT("Unable to write M88E1000_EXT_PHY_SPEC_CTRL "
++ "register\n");
+ return ret_val;
+ }
+
+ /*
+ * In addition, because of the s/w reset above, we need to enable
+- * CRX on TX. This must be set for both full and half duplex
++ * CRX on TX. This must be set for both full and half duplex
+ * operation.
+ */
+
+- ret_val = iegbe_oem_read_phy_reg_ex(hw,
+- M88E1000_PHY_SPEC_CTRL,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw,
++ M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read M88E1000_PHY_SPEC_CTRL register\n");
+@@ -573,12 +502,12 @@ iegbe_oem_cleanup_after_phy_reset(struct
+ }
+
+ phy_data &= ~M88E1000_PSCR_ASSERT_CRS_ON_TX;
+- ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
++ ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
+ phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to write M88E1000_PHY_SPEC_CTRL register\n");
+ return ret_val;
+- }
++ }
+ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+@@ -604,12 +533,12 @@ iegbe_oem_cleanup_after_phy_reset(struct
+ * This is called from iegbe_oem_setup_link which is
+ * called from iegbe_setup_link.
+ **/
+-static int32_t
++static int32_t
+ iegbe_oem_set_phy_mode(struct iegbe_hw *hw)
+ {
+ /*
+ * it is unclear if it is necessary to set the phy mode. Right now only
+- * one MAC 82545 Rev 3 does it, but the other MACs like Tolapai do not.
++ * one MAC 82545 Rev 3 does it, but the other MACs like tola do not.
+ * Leave the functionality off for now until it is determined that Tolapai
+ * needs it as well.
+ */
+@@ -638,41 +567,37 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
+ #ifndef skip_set_mode
+ DEBUGOUT("No need to call oem_set_phy_mode on Truxton\n");
+ #else
+- /*
++ /*
+ * Make note that the M88 phy is what'll be used on Truxton.
+ *
+ * use iegbe_set_phy_mode as example
+ */
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- case BCM5481_PHY_ID:
+- DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- ret_val = iegbe_read_eeprom(hw,
+- EEPROM_PHY_CLASS_WORD,
+- 1,
++ ret_val = iegbe_read_eeprom(hw,
++ EEPROM_PHY_CLASS_WORD,
++ 1,
+ &eeprom_data);
+ if(ret_val) {
+ return ret_val;
+ }
+
+- if((eeprom_data != EEPROM_RESERVED_WORD) &&
+- (eeprom_data & EEPROM_PHY_CLASS_A))
++ if((eeprom_data != EEPROM_RESERVED_WORD) &&
++ (eeprom_data & EEPROM_PHY_CLASS_A))
+ {
+- ret_val = iegbe_oem_write_phy_reg_ex(hw,
+- M88E1000_PHY_PAGE_SELECT,
+- 0x000B);
++ ret_val = iegbe_oem_write_phy_reg_ex(hw,
++ M88E1000_PHY_PAGE_SELECT,
++ 0x000B);
+ if(ret_val) {
+- DEBUGOUT("Unable to write to M88E1000_PHY_PAGE_SELECT register on PHY\n");
++ DEBUGOUT("Unable to write to M88E1000_PHY_PAGE_SELECT "
++ "register on PHY\n");
+ return ret_val;
+ }
+
+- ret_val = iegbe_oem_write_phy_reg_ex(hw,
+- M88E1000_PHY_GEN_CONTROL,
+- 0x8104);
++ ret_val = iegbe_oem_write_phy_reg_ex(hw,
++ M88E1000_PHY_GEN_CONTROL,
++ 0x8104);
+ if(ret_val) {
+ DEBUGOUT("Unable to write to M88E1000_PHY_GEN_CONTROL"
+ "register on PHY\n");
+@@ -687,11 +612,12 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
+ return -E1000_ERR_PHY_TYPE;
+ }
+ #endif
+-
++
+ return E1000_SUCCESS;
+
+ }
+
++
+ /**
+ * iegbe_oem_detect_phy
+ * @hw: iegbe_hw struct containing device specific information
+@@ -702,7 +628,7 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
+ *
+ * This borrows heavily from iegbe_detect_gig_phy
+ **/
+-static int32_t
++static int32_t
+ iegbe_oem_detect_phy(struct iegbe_hw *hw)
+ {
+ int32_t ret_val;
+@@ -715,33 +641,20 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
+ }
+ hw->phy_type = iegbe_phy_oem;
+
+-{
+- // If MAC2 (BCM5395 switch), manually detect the phy
+- struct iegbe_adapter *adapter;
+- uint32_t device_number;
+- adapter = (struct iegbe_adapter *) hw->back;
+- device_number = PCI_SLOT(adapter->pdev->devfn);
+- if (device_number == ICP_XXXX_MAC_2) {
+- hw->phy_id = BCM5395S_PHY_ID;
+- hw->phy_revision = 0;
+- return E1000_SUCCESS;
+- }
+-}
+-
+-
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
+ if(ret_val) {
+ DEBUGOUT("Unable to read PHY register PHY_ID1\n");
+ return ret_val;
+ }
+-
++
+ usec_delay(0x14);
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID2, &phy_id_low);
+ if(ret_val) {
+ DEBUGOUT("Unable to read PHY register PHY_ID2\n");
+ return ret_val;
+ }
+- hw->phy_id = (uint32_t) ((phy_id_high << 0x10) + phy_id_low);
++ hw->phy_id = (uint32_t) ((phy_id_high << 0x10) +
++ (phy_id_low & PHY_REVISION_MASK));
+ hw->phy_revision = (uint32_t) phy_id_low & ~PHY_REVISION_MASK;
+
+ return E1000_SUCCESS;
+@@ -753,15 +666,15 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
+ * @hw: iegbe_hw struct containing device specific information
+ *
+ * Returns the value of the Inter Packet Gap (IPG) Transmit Time (IPGT) in the
+- * Transmit IPG register appropriate for the given PHY. This field is only 10
++ * Transmit IPG register appropriate for the given PHY. This field is only 10
+ * bits wide.
+ *
+ * In the original iegbe code, only the IPGT field varied between media types.
+- * If the OEM phy requires setting IPG Receive Time 1 & 2 Registers, it would
++ * If the OEM phy requires setting IPG Receive Time 1 & 2 Registers, it would
+ * be required to modify the iegbe_config_tx() function to accomdate the change
+ *
+ **/
+-uint32_t
++uint32_t
+ iegbe_oem_get_tipg(struct iegbe_hw *hw)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -777,15 +690,13 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- case BCM5481_PHY_ID:
+- case BCM5395S_PHY_ID:
+ phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
+ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+ return DEFAULT_ICP_XXXX_TIPG_IPGT;
+ }
+-
++
+ return phy_num;
+
+ #else /* ifdef EXTERNAL_MDIO */
+@@ -803,15 +714,15 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
+ * iegbe_oem_phy_is_copper
+ * @hw: iegbe_hw struct containing device specific information
+ *
+- * Test for media type within the iegbe driver is common, so this is a simple
+- * test for copper PHYs. The ICP_XXXX family of controllers initially only
+- * supported copper interconnects (no TBI (ten bit interface) for Fiber
+- * existed). If future revs support either Fiber or an internal SERDES, it
+- * may become necessary to evaluate where this function is used to go beyond
++ * Test for media type within the iegbe driver is common, so this is a simple
++ * test for copper PHYs. The ICP_XXXX family of controllers initially only
++ * supported copper interconnects (no TBI (ten bit interface) for Fiber
++ * existed). If future revs support either Fiber or an internal SERDES, it
++ * may become necessary to evaluate where this function is used to go beyond
+ * determining whether or not media type is just copper.
+ *
+ **/
+-int
++int
+ iegbe_oem_phy_is_copper(struct iegbe_hw *hw)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -827,23 +738,21 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- case BCM5481_PHY_ID:
+- case BCM5395S_PHY_ID:
+ isCopper = TRUE;
+ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+ return -E1000_ERR_PHY_TYPE;
+ }
+-
++
+ return isCopper;
+
+ #else /* ifdef EXTERNAL_MDIO */
+
+- /*
++ /*
+ * caught between returning true or false. True allows it to
+ * be entered into && statements w/o ill effect, but false
+- * would make more sense
++ * would make more sense
+ */
+ DEBUGOUT("Invalid value for transceiver type, return FALSE\n");
+ return FALSE;
+@@ -856,19 +765,19 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
+ * iegbe_oem_get_phy_dev_number
+ * @hw: iegbe_hw struct containing device specific information
+ *
+- * For ICP_XXXX family of devices, there are 3 MACs, each of which may
+- * have a different PHY (and indeed a different media interface). This
+- * function is used to indicate which of the MAC/PHY pairs we are interested
++ * For ICP_XXXX family of devices, there are 3 MACs, each of which may
++ * have a different PHY (and indeed a different media interface). This
++ * function is used to indicate which of the MAC/PHY pairs we are interested
+ * in.
+- *
++ *
+ **/
+-uint32_t
++uint32_t
+ iegbe_oem_get_phy_dev_number(struct iegbe_hw *hw)
+ {
+ #ifdef EXTERNAL_MDIO
+
+- /*
+- * for ICP_XXXX family of devices, the three network interfaces are
++ /*
++ * for ICP_XXXX family of devices, the three network interfaces are
+ * differentiated by their PCI device number, where the three share
+ * the same PCI bus
+ */
+@@ -886,15 +795,15 @@ iegbe_oem_get_phy_dev_number(struct iegb
+
+ switch(device_number)
+ {
+- case ICP_XXXX_MAC_0:
++ case ICP_XXXX_MAC_0:
++ hw->phy_addr = 0x00;
++ break;
++ case ICP_XXXX_MAC_1:
+ hw->phy_addr = 0x01;
+ break;
+- case ICP_XXXX_MAC_1:
++ case ICP_XXXX_MAC_2:
+ hw->phy_addr = 0x02;
+ break;
+- case ICP_XXXX_MAC_2:
+- hw->phy_addr = 0x00;
+- break;
+ default: hw->phy_addr = 0x00;
+ }
+ return hw->phy_addr;
+@@ -915,7 +824,7 @@ iegbe_oem_get_phy_dev_number(struct iegb
+ * @cmd: the original IOCTL command that instigated the call chain.
+ *
+ * This function abstracts out the code necessary to service the
+- * SIOCSMIIREG case within the iegbe_mii_ioctl() for oem PHYs.
++ * SIOCSMIIREG case within the iegbe_mii_ioctl() for oem PHYs.
+ * iegbe_mii_ioctl() was implemented for copper phy's only and this
+ * function will only be called if iegbe_oem_phy_is_copper() returns true for
+ * a given MAC. Note that iegbe_mii_ioctl() has a compile flag
+@@ -924,14 +833,14 @@ iegbe_oem_get_phy_dev_number(struct iegb
+ * NOTE: a spinlock is in effect for the duration of this call. It is
+ * imperative that a negative value be returned on any error, so
+ * the spinlock can be released properly.
+- *
++ *
+ **/
+ int
+ iegbe_oem_mii_ioctl(struct iegbe_adapter *adapter, unsigned long flags,
+ struct ifreq *ifr, int cmd)
+ {
+ #ifdef EXTERNAL_MDIO
+-
++
+ struct mii_ioctl_data *data = if_mii(ifr);
+ uint16_t mii_reg = data->val_in;
+ uint16_t spddplx;
+@@ -942,12 +851,6 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
+ if(!adapter || !ifr) {
+ return -1;
+ }
+-
+- // If MAC2 (BCM5395 switch) then leave now
+- if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
+- return -1;
+- }
+-
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if(mii_reg & MII_CR_POWER_DOWN) {
+@@ -956,7 +859,7 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
+ if(mii_reg & MII_CR_AUTO_NEG_EN) {
+ adapter->hw.autoneg = 1;
+ adapter->hw.autoneg_advertised = ICP_XXXX_AUTONEG_ADV_DEFAULT;
+- }
++ }
+ else {
+ if(mii_reg & 0x40) {
+ spddplx = SPEED_1000;
+@@ -976,7 +879,7 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
+ if(netif_running(adapter->netdev)) {
+ iegbe_down(adapter);
+ iegbe_up(adapter);
+- }
++ }
+ else {
+ iegbe_reset(adapter);
+ }
+@@ -1043,10 +946,10 @@ void iegbe_oem_fiber_live_in_suspend(str
+ * Note: The call to iegbe_get_regs() assumed an array of 24 elements
+ * where the last 11 are passed to this function. If the array
+ * that is passed to the calling function has its size or element
+- * defintions changed, this function becomes broken.
++ * defintions changed, this function becomes broken.
+ *
+ **/
+-void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
++void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
+ uint32_t data_len)
+ {
+ #define EXPECTED_ARRAY_LEN 11
+@@ -1062,13 +965,13 @@ void iegbe_oem_get_phy_regs(struct iegbe
+ * Use the corrected_length variable to make sure we don't exceed that
+ * length
+ */
+- corrected_len = data_len>EXPECTED_ARRAY_LEN
++ corrected_len = data_len>EXPECTED_ARRAY_LEN
+ ? EXPECTED_ARRAY_LEN : data_len;
+ memset(data, 0, corrected_len*sizeof(uint32_t));
+
+ #ifdef EXTERNAL_MDIO
+
+- /*
++ /*
+ * Fill data[] with...
+ *
+ * [0] = cable length
+@@ -1084,16 +987,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
+ * [10] = mdix mode
+ */
+ switch (adapter->hw.phy_id) {
+- case BCM5395S_PHY_ID:
+- case BCM5481_PHY_ID:
+- DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ if(corrected_len > 0) {
+- iegbe_oem_read_phy_reg_ex(&adapter->hw,
+- M88E1000_PHY_SPEC_STATUS,
++ iegbe_oem_read_phy_reg_ex(&adapter->hw,
++ M88E1000_PHY_SPEC_STATUS,
+ (uint16_t *) &data[0]);
+ }
+ if(corrected_len > 0x1){
+@@ -1106,7 +1004,7 @@ void iegbe_oem_get_phy_regs(struct iegbe
+ data[0x3] = 0x0; /* Dummy (to align w/ IGP phy reg dump) */
+ }
+ if(corrected_len > 0x4) {
+- iegbe_oem_read_phy_reg_ex(&adapter->hw, M88E1000_PHY_SPEC_CTRL,
++ iegbe_oem_read_phy_reg_ex(&adapter->hw, M88E1000_PHY_SPEC_CTRL,
+ (uint16_t *) &data[0x4]);
+ }
+ if(corrected_len > 0x5) {
+@@ -1144,7 +1042,7 @@ void iegbe_oem_get_phy_regs(struct iegbe
+ * This is called from iegbe_set_phy_loopback in response from call from
+ * ethtool to place the PHY into loopback mode.
+ **/
+-int
++int
+ iegbe_oem_phy_loopback(struct iegbe_adapter *adapter)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -1165,23 +1063,18 @@ iegbe_oem_phy_loopback(struct iegbe_adap
+ * was that nonintegrated called iegbe_phy_reset_clk_and_crs(),
+ * hopefully this won't matter as CRS required for half-duplex
+ * operation and this is set to full duplex.
+- *
++ *
+ * Make note that the M88 phy is what'll be used on Truxton
+ * Loopback configuration is the same for each of the supported PHYs.
+ */
+ switch (adapter->hw.phy_id) {
+- case BCM5395S_PHY_ID:
+- DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- case BCM5481_PHY_ID:
+
+ adapter->hw.autoneg = FALSE;
+
+ /* turn off Auto-MDI/MDIX */
+- /*ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw,
++ /*ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw,
+ M88E1000_PHY_SPEC_CTRL, 0x0808);
+ if(ret_val)
+ {
+@@ -1206,10 +1099,10 @@ iegbe_oem_phy_loopback(struct iegbe_adap
+ DEBUGOUT("Unable to write to register PHY_CTRL\n");
+ return ret_val;
+ }
+-
+-
++
++
+ /* force 1000, set loopback */
+- /*ret_val =
++ /*ret_val =
+ iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL, 0x4140); */
+ ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL, 0x6100);
+ if(ret_val) {
+@@ -1228,21 +1121,21 @@ iegbe_oem_phy_loopback(struct iegbe_adap
+ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg);
+
+ /*
+- * Write out to PHY registers 29 and 30 to disable the Receiver.
++ * Write out to PHY registers 29 and 30 to disable the Receiver.
+ * This directly lifted from iegbe_phy_disable_receiver().
+- *
++ *
+ * The code is currently commented out as for the M88 used in
+ * Truxton, registers 29 and 30 are unutilized. Leave in, just
+- * in case we are on the receiving end of an 'undocumented'
++ * in case we are on the receiving end of an 'undocumented'
+ * feature
+ */
+- /*
++ /*
+ * iegbe_oem_write_phy_reg_ex(&adapter->hw, 29, 0x001F);
+ * iegbe_oem_write_phy_reg_ex(&adapter->hw, 30, 0x8FFC);
+ * iegbe_oem_write_phy_reg_ex(&adapter->hw, 29, 0x001A);
+ * iegbe_oem_write_phy_reg_ex(&adapter->hw, 30, 0x8FF0);
+ */
+-
++
+ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+@@ -1268,15 +1161,15 @@ iegbe_oem_phy_loopback(struct iegbe_adap
+ * ethtool to place the PHY out of loopback mode. This handles the OEM
+ * specific part of loopback cleanup.
+ **/
+-void
++void
+ iegbe_oem_loopback_cleanup(struct iegbe_adapter *adapter)
+ {
+ #ifdef EXTERNAL_MDIO
+
+- /*
+- * This borrows liberally from iegbe_loopback_cleanup().
++ /*
++ * This borrows liberally from iegbe_loopback_cleanup().
+ * making note that the M88 phy is what'll be used on Truxton
+- *
++ *
+ * Loopback cleanup is the same for all supported PHYs.
+ */
+ int32_t ret_val;
+@@ -1289,38 +1182,32 @@ iegbe_oem_loopback_cleanup(struct iegbe_
+ }
+
+ switch (adapter->hw.phy_id) {
+- case BCM5395S_PHY_ID:
+- DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
+- return;
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- case BCM5481_PHY_ID:
+ default:
+ adapter->hw.autoneg = TRUE;
+-
+- ret_val = iegbe_oem_read_phy_reg_ex(&adapter->hw, PHY_CTRL,
++
++ ret_val = iegbe_oem_read_phy_reg_ex(&adapter->hw, PHY_CTRL,
+ &phy_reg);
+ if(ret_val) {
+ DEBUGOUT("Unable to read to register PHY_CTRL\n");
+ return;
+ }
+-
++
+ if(phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+-
+- ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL,
++
++ ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL,
+ phy_reg);
+ if(ret_val) {
+ DEBUGOUT("Unable to write to register PHY_CTRL\n");
+ return;
+ }
+-
++
+ iegbe_phy_reset(&adapter->hw);
+ }
+ }
+-
++
+ #endif /* ifdef EXTERNAL_MDIO */
+ return;
+
+@@ -1336,7 +1223,7 @@ iegbe_oem_loopback_cleanup(struct iegbe_
+ * Called by iegbe_check_downshift(), checks the PHY to see if it running
+ * at as speed slower than its maximum.
+ **/
+-uint32_t
++uint32_t
+ iegbe_oem_phy_speed_downgraded(struct iegbe_hw *hw, uint16_t *isDowngraded)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -1356,24 +1243,19 @@ iegbe_oem_phy_speed_downgraded(struct ie
+ */
+
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- case BCM5481_PHY_ID:
+- *isDowngraded = 0;
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
+ return ret_val;
+ }
+-
+- *isDowngraded = (phy_data & M88E1000_PSSR_DOWNSHIFT)
++
++ *isDowngraded = (phy_data & M88E1000_PSSR_DOWNSHIFT)
+ >> M88E1000_PSSR_DOWNSHIFT_SHIFT;
+-
+- break;
++
++ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+ return 1;
+@@ -1388,7 +1270,7 @@ iegbe_oem_phy_speed_downgraded(struct ie
+ }
+
+ *isDowngraded = 0;
+- return 0;
++ return 0;
+
+ #endif /* ifdef EXTERNAL_MDIO */
+ }
+@@ -1403,7 +1285,7 @@ iegbe_oem_phy_speed_downgraded(struct ie
+ * Called by iegbe_check_downshift(), checks the PHY to see if it running
+ * at as speed slower than its maximum.
+ **/
+-int32_t
++int32_t
+ iegbe_oem_check_polarity(struct iegbe_hw *hw, uint16_t *polarity)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -1417,33 +1299,27 @@ iegbe_oem_check_polarity(struct iegbe_hw
+ return -1;
+ }
+
+- /*
++ /*
+ * borrow liberally from iegbe_check_polarity.
+ * Make note that the M88 phy is what'll be used on Truxton
+ */
+
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- case BCM5481_PHY_ID:
+- *polarity = 0;
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ /* return the Polarity bit in the Status register. */
+- ret_val = iegbe_oem_read_phy_reg_ex(hw,
+- M88E1000_PHY_SPEC_STATUS,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw,
++ M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
+ return ret_val;
+ }
+
+- *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY)
++ *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY)
+ >> M88E1000_PSSR_REV_POLARITY_SHIFT;
+-
+- break;
+-
++
++ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+ return -E1000_ERR_PHY_TYPE;
+@@ -1472,7 +1348,7 @@ iegbe_oem_check_polarity(struct iegbe_hw
+ * the MAC with the PHY. It turns out on ICP_XXXX, this is not
+ * done automagically.
+ **/
+-int32_t
++int32_t
+ iegbe_oem_phy_is_full_duplex(struct iegbe_hw *hw, int *isFD)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -1485,40 +1361,22 @@ iegbe_oem_phy_is_full_duplex(struct iegb
+ if(!hw || !isFD) {
+ return -1;
+ }
+- /*
++ /*
+ * Make note that the M88 phy is what'll be used on Truxton
+ * see iegbe_config_mac_to_phy
+ */
+-
++
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- /* Always full duplex */
+- *isFD = 1;
+- break;
+-
+- case BCM5481_PHY_ID:
+- ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
+- if(ret_val) return ret_val;
+-
+- switch (BCM5481_ASTAT_HCD(phy_data)) {
+- case BCM5481_ASTAT_1KBTFD:
+- case BCM5481_ASTAT_100BTXFD:
+- *isFD = 1;
+- break;
+- default:
+- *isFD = 0;
+- }
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+- if(ret_val) {
+- DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
+- return ret_val;
+- }
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
++ &phy_data);
++ if(ret_val) {
++ DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
++ return ret_val;
++ }
+ *isFD = (phy_data & M88E1000_PSSR_DPLX) != 0;
+-
++
+ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+@@ -1546,7 +1404,7 @@ iegbe_oem_phy_is_full_duplex(struct iegb
+ * the MAC with the PHY. It turns out on ICP_XXXX, this is not
+ * done automagically.
+ **/
+-int32_t
++int32_t
+ iegbe_oem_phy_is_speed_1000(struct iegbe_hw *hw, int *is1000)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -1565,28 +1423,10 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
+ */
+
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- /* Always 1000mb */
+- *is1000 = 1;
+- break;
+-
+- case BCM5481_PHY_ID:
+- ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
+- if(ret_val) return ret_val;
+-
+- switch (BCM5481_ASTAT_HCD(phy_data)) {
+- case BCM5481_ASTAT_1KBTFD:
+- case BCM5481_ASTAT_1KBTHD:
+- *is1000 = 1;
+- break;
+- default:
+- *is1000 = 0;
+- }
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
++ &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
+ return ret_val;
+@@ -1638,28 +1478,9 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
+ * see iegbe_config_mac_to_phy
+ */
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- /* Always 1000Mb, never 100mb */
+- *is100 = 0;
+- break;
+-
+- case BCM5481_PHY_ID:
+- ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
+- if(ret_val) return ret_val;
+-
+- switch (BCM5481_ASTAT_HCD(phy_data)) {
+- case BCM5481_ASTAT_100BTXFD:
+- case BCM5481_ASTAT_100BTXHD:
+- *is100 = 1;
+- break;
+- default:
+- *is100 = 0;
+- }
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- ret_val = iegbe_oem_read_phy_reg_ex(hw,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw,
+ M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if(ret_val) {
+@@ -1714,29 +1535,24 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
+ * see iegbe_phy_m88_get_info
+ */
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- case BCM5481_PHY_ID:
+- DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- /* The downshift status is checked only once, after link is
+- * established and it stored in the hw->speed_downgraded parameter.*/
++ /* The downshift status is checked only once, after link is
++ * established and it stored in the hw->speed_downgraded parameter.*/
+ phy_info->downshift = (iegbe_downshift)hw->speed_downgraded;
+-
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
++
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_CTRL\n");
+ return ret_val;
+ }
+
+- phy_info->extended_10bt_distance =
+- (phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE)
++ phy_info->extended_10bt_distance =
++ (phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE)
+ >> M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT;
+ phy_info->polarity_correction =
+- (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
++ (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
+ >> M88E1000_PSCR_POLARITY_REVERSAL_SHIFT;
+
+ /* Check polarity status */
+@@ -1747,11 +1563,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
+
+ phy_info->cable_polarity = polarity;
+
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if(ret_val) {
+- DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
+- return ret_val;
++ DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
++ return ret_val;
+ }
+
+ phy_info->mdix_mode = (phy_data & M88E1000_PSSR_MDIX)
+@@ -1761,24 +1577,24 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
+ /* Cable Length Estimation and Local/Remote Receiver Information
+ * are only valid at 1000 Mbps.
+ */
+- phy_info->cable_length =
++ phy_info->cable_length =
+ (phy_data & M88E1000_PSSR_CABLE_LENGTH)
+ >> M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_1000T_STATUS,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read register PHY_1000T_STATUS\n");
+ return ret_val;
+ }
+
+- phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
++ phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
+ >> SR_1000T_LOCAL_RX_STATUS_SHIFT;
+-
+- phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
++
++ phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
+ >> SR_1000T_REMOTE_RX_STATUS_SHIFT;
+ }
+-
++
+ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+@@ -1801,7 +1617,7 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
+ * This function will perform a software initiated reset of
+ * the PHY
+ **/
+-int32_t
++int32_t
+ iegbe_oem_phy_hw_reset(struct iegbe_hw *hw)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -1815,18 +1631,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
+ return -1;
+ }
+ /*
+- * This code pretty much copies the default case from
++ * This code pretty much copies the default case from
+ * iegbe_phy_reset() as that is what is appropriate for
+- * the M88 used in truxton.
++ * the M88 used in truxton.
+ */
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- case BCM5481_PHY_ID:
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read register PHY_CTRL\n");
+@@ -1864,7 +1675,7 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
+ * to perform and post reset initialiation. Not all PHYs require
+ * this, which is why it was split off as a seperate function.
+ **/
+-void
++void
+ iegbe_oem_phy_init_script(struct iegbe_hw *hw)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -1877,19 +1688,17 @@ iegbe_oem_phy_init_script(struct iegbe_h
+
+ /* call the GCU func that can do any phy specific init
+ * functions after a reset
+- *
++ *
+ * Make note that the M88 phy is what'll be used on Truxton
+ *
+- * The closest thing is in iegbe_phy_init_script, however this is
++ * The closest thing is in iegbe_phy_init_script, however this is
+ * for the IGP style of phy. This is probably a no-op for truxton
+ * but may be needed by OEM's later on
+- *
++ *
+ */
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- case BCM5481_PHY_ID:
+- case BCM5395S_PHY_ID:
+ DEBUGOUT("Nothing to do for OEM PHY Init");
+ break;
+ default:
+@@ -1926,13 +1735,8 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
+ return -1;
+ }
+
+- if (hw->phy_id == BCM5395S_PHY_ID) {
+- DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
+- return -1;
+- }
+-
+ /* call the GCU func that will read the phy
+- *
++ *
+ * Make note that the M88 phy is what'll be used on Truxton.
+ *
+ * The closest thing is in iegbe_read_phy_reg_ex.
+@@ -1940,7 +1744,7 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
+ * NOTE: this is 1 (of 2) functions that is truly dependant on the
+ * gcu module
+ */
+-
++
+ ret_val = gcu_read_eth_phy(iegbe_oem_get_phy_dev_number(hw),
+ reg_addr, phy_data);
+ if(ret_val) {
+@@ -1962,10 +1766,10 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
+ *
+ * Returns E1000_SUCCESS, negative E1000 error code on failure
+ *
+- * This is called from iegbe_config_mac_to_phy. Various supported
++ * This is called from iegbe_config_mac_to_phy. Various supported
+ * Phys may require the RGMII/RMII Translation gasket be set to RMII.
+ **/
+-int32_t
++int32_t
+ iegbe_oem_set_trans_gasket(struct iegbe_hw *hw)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -1978,17 +1782,12 @@ iegbe_oem_set_trans_gasket(struct iegbe_
+ }
+
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- case BCM5481_PHY_ID:
+- DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ /* Gasket set correctly for Marvell Phys, so nothing to do */
+ break;
+ /* Add your PHY_ID here if your device requires an RMII interface
+- case YOUR_PHY_ID:
++ case YOUR_PHY_ID:
+ ctrl_aux_reg = E1000_READ_REG(hw, CTRL_AUX);
+ ctrl_aux_reg |= E1000_CTRL_AUX_ICP_xxxx_MII_TGS; // Set the RGMII_RMII bit
+ */
+@@ -2032,7 +1831,7 @@ iegbe_oem_write_phy_reg_ex(struct iegbe_
+ return -1;
+ }
+ /* call the GCU func that will write to the phy
+- *
++ *
+ * Make note that the M88 phy is what'll be used on Truxton.
+ *
+ * The closest thing is in iegbe_write_phy_reg_ex
+@@ -2062,11 +1861,11 @@ iegbe_oem_write_phy_reg_ex(struct iegbe_
+ * @hw struct iegbe_hw hardware specific data
+ *
+ * iegbe_reset_hw is called to reset the MAC. If, for
+- * some reason the PHY needs to be reset as well, this
++ * some reason the PHY needs to be reset as well, this
+ * should return TRUE and then iegbe_oem_phy_hw_reset()
+ * will be called.
+ **/
+-int
++int
+ iegbe_oem_phy_needs_reset_with_mac(struct iegbe_hw *hw)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -2079,16 +1878,14 @@ iegbe_oem_phy_needs_reset_with_mac(struc
+ return FALSE;
+ }
+
+- /*
++ /*
+ * From the original iegbe driver, the M88
+- * PHYs did not seem to need this reset,
++ * PHYs did not seem to need this reset,
+ * so returning FALSE.
+ */
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- case BCM5481_PHY_ID:
+- case BCM5395S_PHY_ID:
+ ret_val = FALSE;
+ break;
+ default:
+@@ -2116,7 +1913,7 @@ iegbe_oem_phy_needs_reset_with_mac(struc
+ * tweaking of the PHY, for PHYs that support a DSP.
+ *
+ **/
+-int32_t
++int32_t
+ iegbe_oem_config_dsp_after_link_change(struct iegbe_hw *hw,
+ int link_up)
+ {
+@@ -2138,8 +1935,6 @@ iegbe_oem_config_dsp_after_link_change(s
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- case BCM5481_PHY_ID:
+- case BCM5395S_PHY_ID:
+ DEBUGOUT("No DSP to configure on OEM PHY");
+ break;
+ default:
+@@ -2165,7 +1960,7 @@ iegbe_oem_config_dsp_after_link_change(s
+ *
+ *
+ **/
+-int32_t
++int32_t
+ iegbe_oem_get_cable_length(struct iegbe_hw *hw,
+ uint16_t *min_length,
+ uint16_t *max_length)
+@@ -2177,21 +1972,15 @@ iegbe_oem_get_cable_length(struct iegbe_
+ uint16_t phy_data;
+
+ DEBUGFUNC1("%s",__func__);
+-
++
+ if(!hw || !min_length || !max_length) {
+ return -1;
+ }
+
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- case BCM5481_PHY_ID:
+- *min_length = 0;
+- *max_length = iegbe_igp_cable_length_150;
+- break;
+-
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- ret_val = iegbe_oem_read_phy_reg_ex(hw,
++ ret_val = iegbe_oem_read_phy_reg_ex(hw,
+ M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if(ret_val) {
+@@ -2246,13 +2035,13 @@ iegbe_oem_get_cable_length(struct iegbe_
+ /**
+ * iegbe_oem_phy_is_link_up
+ * @hw iegbe_hw struct containing device specific information
+- * @isUp a boolean returning true if link is up
++ * @isUp a boolean returning true if link is up
+ *
+ * This is called as part of iegbe_config_mac_to_phy() to align
+ * the MAC with the PHY. It turns out on ICP_XXXX, this is not
+ * done automagically.
+ **/
+-int32_t
++int32_t
+ iegbe_oem_phy_is_link_up(struct iegbe_hw *hw, int *isUp)
+ {
+ #ifdef EXTERNAL_MDIO
+@@ -2266,35 +2055,19 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
+ if(!hw || !isUp) {
+ return -1;
+ }
+- /*
++ /*
+ * Make note that the M88 phy is what'll be used on Truxton
+ * see iegbe_config_mac_to_phy
+ */
+
+ switch (hw->phy_id) {
+- case BCM5395S_PHY_ID:
+- /* Link always up */
+- *isUp = TRUE;
+- return E1000_SUCCESS;
+- break;
+-
+- case BCM5481_PHY_ID:
+- iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
+- if(ret_val)
+- {
+- DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
+- return ret_val;
+- }
+- statusMask = BCM5481_ESTAT_LINK;
+- break;
+-
+- case M88E1000_I_PHY_ID:
++ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+- iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
++ iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
++ &phy_data);
+ statusMask = M88E1000_PSSR_LINK;
+- break;
++ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+ return -E1000_ERR_PHY_TYPE;
+@@ -2319,213 +2092,3 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
+ #endif /* ifdef EXTERNAL_MDIO */
+ }
+
+-
+-
+-//-----
+-// Read BCM5481 expansion register
+-//
+-int32_t
+-bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
+-{
+- int ret;
+- uint16_t selector;
+- uint16_t reg_data;
+-
+- // Get the current value of bits 15:12
+- ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
+- if (ret)
+- return ret;
+-
+- // Select the expansion register
+- selector &= 0xf000;
+- selector |= (0xf << 8) | (reg);
+- iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
+-
+- // Read the expansion register
+- ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &reg_data);
+-
+- // De-select the expansion registers.
+- selector &= 0xf000;
+- iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
+-
+- if (ret)
+- return ret;
+-
+- *data = reg_data;
+- return ret;
+-}
+-
+-//-----
+-// Read reg 0x18 sub-register
+-//
+-static int32_t
+-bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
+-{
+- int ret;
+- uint16_t tmp_data;
+-
+- // Select reg 0x18, sv
+- tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
+- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
+- if(ret)
+- return ret;
+-
+- // Read reg 0x18, sv
+- ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
+- if(ret)
+- return ret;
+-
+- *data = tmp_data;
+- return ret;
+-}
+-
+-//-----
+-// Read reg 0x1C sub-register
+-//
+-int32_t
+-bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
+-{
+- int ret;
+- uint16_t tmp_data;
+-
+- // Select reg 0x1c, sv
+- tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
+-
+- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
+- if(ret)
+- return ret;
+-
+- // Read reg 0x1c, sv
+- ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
+- if(ret)
+- return ret;
+-
+- *data = tmp_data;
+- return ret;
+-}
+-
+-//-----
+-// Read-modify-write a 0x1C register.
+-//
+-// hw - hardware access info.
+-// reg - 0x1C register to modify.
+-// data - bits which should be set.
+-// mask - the '1' bits in this argument will be cleared in the data
+-// read from 'reg' then 'data' will be or'd in and the result
+-// will be written to 'reg'.
+-
+-int32_t
+-bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
+-{
+- int32_t ret;
+- uint16_t reg_data;
+-
+- ret = 0;
+-
+- ret = bcm5481_read_1csv (hw, reg, &reg_data);
+- if (ret)
+- {
+- DEBUGOUT("Unable to read BCM5481 1CH register\n");
+- printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
+- return ret;
+- }
+-
+- reg_data &= ~mask;
+- reg_data |= (BCM5481_R1CH_WE | data);
+-
+- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
+- if(ret)
+- {
+- DEBUGOUT("Unable to write BCM5481 1CH register\n");
+- printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
+- return ret;
+- }
+-
+- return ret;
+-}
+-
+-int32_t
+-oi_phy_setup (struct iegbe_hw *hw)
+-{
+- int ret;
+- uint16_t pmii_data;
+- uint16_t mctrl_data;
+- uint16_t cacr_data;
+- uint16_t sc1_data;
+- uint16_t lctl_data;
+-
+- ret = 0;
+-
+- // Set low power mode via reg 0x18, sv010, bit 6
+- // Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
+- ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
+- if (ret)
+- {
+- DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
+- printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
+- return ret;
+- }
+-
+- // Set the LPM bit in the data just read and write back to sv010
+- // The shadow register select bits [2:0] are set by reading the sv010
+- // register.
+- pmii_data |= BCM5481_R18H_SV010_LPM;
+- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
+- if(ret)
+- {
+- DEBUGOUT("Unable to write BCM5481_R18H register\n");
+- printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
+- return ret;
+- }
+-
+-
+- // Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
+-
+- if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
+- {
+- DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
+- printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
+- return ret;
+- }
+- mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
+-
+- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
+- if(ret)
+- {
+- DEBUGOUT("Unable to write BCM5481_R18H register\n");
+- printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
+- return ret;
+- }
+-
+-
+- // Enable RGMII transmit clock delay in reg 0x1c, sv00011
+- ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
+- if (ret)
+- {
+- DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
+- printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
+- return ret;
+- }
+-
+- cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
+-
+- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
+- if(ret)
+- {
+- DEBUGOUT("Unable to write BCM5481_R1CH register\n");
+- printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
+- return ret;
+- }
+-
+- // Enable dual link speed indication (0x1c, sv 00010, bit 2)
+- ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
+- if (ret)
+- return ret;
+-
+- // Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
+- ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
+- if (ret)
+- return ret;
+-
+- return ret;
+-}
+--- a/Embedded/src/GbE/iegbe_oem_phy.h
++++ b/Embedded/src/GbE/iegbe_oem_phy.h
+@@ -2,31 +2,31 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+- This program is free software; you can redistribute it and/or modify
++ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+- This program is distributed in the hope that it will be useful, but
+- WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ This program is distributed in the hope that it will be useful, but
++ WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+- The full GNU General Public License is included in this distribution
++ The full GNU General Public License is included in this distribution
+ in the file called LICENSE.GPL.
+
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+-
+- Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
++
++ Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
+
+ *******************************************************************************/
+ #ifndef _IEGBE_OEM_PHY_H_
+@@ -45,10 +45,10 @@ int32_t iegbe_oem_set_trans_gasket(struc
+ uint32_t iegbe_oem_get_tipg(struct iegbe_hw *hw);
+ int iegbe_oem_phy_is_copper(struct iegbe_hw *hw);
+ uint32_t iegbe_oem_get_phy_dev_number(struct iegbe_hw *hw);
+-int iegbe_oem_mii_ioctl(struct iegbe_adapter *adapter, unsigned long flags,
++int iegbe_oem_mii_ioctl(struct iegbe_adapter *adapter, unsigned long flags,
+ struct ifreq *ifr, int cmd);
+ void iegbe_oem_fiber_live_in_suspend(struct iegbe_hw *hw);
+-void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
++void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
+ uint32_t data_length);
+ int iegbe_oem_phy_loopback(struct iegbe_adapter *adapter);
+ void iegbe_oem_loopback_cleanup(struct iegbe_adapter *adapter);
+@@ -94,81 +94,14 @@ int32_t iegbe_oem_phy_is_link_up(struct
+ #define ICP_XXXX_MAC_2 2
+
+ #define DEFAULT_ICP_XXXX_TIPG_IPGT 8 /* Inter Packet Gap Transmit Time */
+-#define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
+-#define BCM5481_PHY_ID 0x0143BCA2
+-#define BCM5395S_PHY_ID 0x0143BCF0
++#define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
+
+ /* Miscellaneous defines */
+ #ifdef IEGBE_10_100_ONLY
+- #define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x0F
++ #define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x0F
+ #else
+ #define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x2F
+ #endif
+
+-//-----
+-// BCM5481 specifics
+-
+-#define BCM5481_ECTRL (0x10)
+-#define BCM5481_ESTAT (0x11)
+-#define BCM5481_RXERR (0x12)
+-#define BCM5481_EXPRW (0x15)
+-#define BCM5481_EXPACC (0x17)
+-#define BCM5481_ASTAT (0x19)
+-#define BCM5481_R18H (0x18)
+-#define BCM5481_R1CH (0x1c)
+-
+-//-----
+-// indirect register access via register 18h
+-
+-#define BCM5481_R18H_SV_MASK (7) // Mask for SV bits.
+-#define BCM5481_R18H_SV_ACTRL (0) // SV000 Aux. control
+-#define BCM5481_R18H_SV_10BT (1) // SV001 10Base-T
+-#define BCM5481_R18H_SV_PMII (2) // SV010 Power/MII control
+-#define BCM5481_R18H_SV_MTEST (4) // SV100 Misc. test
+-#define BCM5481_R18H_SV_MCTRL (7) // SV111 Misc. control
+-
+-#define BCM5481_R18H_SV001_POL (1 << 13) // Polarity
+-#define BCM5481_R18H_SV010_LPM (1 << 6)
+-#define BCM5481_R18H_SV111_SKEW (1 << 8)
+-#define BCM5481_R18H_WE (1 << 15) // Write enable
+-
+-// 0x1c registers
+-#define BCM5481_R1CH_SV_SHIFT (10)
+-#define BCM5481_R1CH_SV_MASK (0x1f)
+-#define BCM5481_R1CH_SC1 (0x02) // sv00010 Spare control 1
+-#define BCM5481_R1CH_CACR (0x03) // sv00011 Clock alignment control
+-#define BCM5481_R1CH_LCTRL (0x09) // sv01001 LED control
+-#define BCM5481_R1CH_LEDS1 (0x0d) // sv01101 LED selector 1
+-
+-// 0x1c common
+-#define BCM5481_R1CH_WE (1 << 15) // Write enable
+-
+-// 0x1c, sv 00010
+-#define BCM5481_R1CH_SC1_LINK (1 << 2) // sv00010 Linkspeed
+-
+-// 0x1c, sv 00011
+-#define BCM5481_R1CH_CACR_TCD (1 << 9) // sv00011 RGMII tx clock delay
+-
+-// 0x1c, sv 01001
+-#define BCM5481_R1CH_LCTRL_ALEN (1 << 4) // Activity/Link enable on ACTIVITY LED
+-#define BCM5481_R1CH_LCTRL_AEN (1 << 3) // Activity enable on ACTIVITY LED
+-
+-
+-#define BCM5481_ECTRL_DISMDIX (1 <<14)
+-
+-#define BCM5481_MCTRL_AUTOMDIX (1 <<9)
+-
+-#define BCM5481_ESTAT_LINK (1 << 8)
+-
+-#define BCM5481_ASTAT_ANC (1 << 15)
+-#define BCM5481_ASTAT_ANHCD (7 << 8)
+-#define BCM5481_ASTAT_HCD(x) ((x >> 8) & 7)
+-#define BCM5481_ASTAT_1KBTFD (0x7)
+-#define BCM5481_ASTAT_1KBTHD (0x6)
+-#define BCM5481_ASTAT_100BTXFD (0x5)
+-#define BCM5481_ASTAT_100BTXHD (0x3)
+-
+-// end BCM5481 specifics
+-
+ #endif /* ifndef _IEGBE_OEM_PHY_H_ */
+-
++
+--- a/Embedded/src/GbE/iegbe_osdep.h
++++ b/Embedded/src/GbE/iegbe_osdep.h
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+--- a/Embedded/src/GbE/iegbe_param.c
++++ b/Embedded/src/GbE/iegbe_param.c
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+@@ -239,11 +239,7 @@ E1000_PARAM(InterruptThrottleRate, "Inte
+ #define MAX_TXABSDELAY 0xFFFF
+ #define MIN_TXABSDELAY 0
+
+-#ifdef IEGBE_GBE_WORKAROUND
+-#define DEFAULT_ITR 0
+-#else
+ #define DEFAULT_ITR 8000
+-#endif
+
+
+ #define MAX_ITR 100000
+@@ -373,7 +369,7 @@ iegbe_check_options(struct iegbe_adapter
+ tx_ring->count = opt.def;
+ }
+ #endif
+- for (i = 0; i < adapter->num_queues; i++)
++ for (i = 0; i < adapter->num_tx_queues; i++)
+ tx_ring[i].count = tx_ring->count;
+ }
+ { /* Receive Descriptor Count */
+@@ -403,7 +399,7 @@ iegbe_check_options(struct iegbe_adapter
+ rx_ring->count = opt.def;
+ }
+ #endif
+- for (i = 0; i < adapter->num_queues; i++)
++ for (i = 0; i < adapter->num_rx_queues; i++)
+ rx_ring[i].count = rx_ring->count;
+ }
+ { /* Checksum Offload Enable/Disable */
+--- a/Embedded/src/GbE/kcompat.c
++++ b/Embedded/src/GbE/kcompat.c
+@@ -1,8 +1,8 @@
+-/************************************************************
+-
++/************************************************************
++
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,183 +22,192 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
+-
+- Contact Information:
+-
+- Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
+-
+-**************************************************************/
+-/**************************************************************************
+- * @ingroup KCOMPAT_GENERAL
+- *
+- * @file kcompat.c
+- *
+- * @description
+- *
+- *
+- **************************************************************************/
+-#include "kcompat.h"
+-
+-/*************************************************************/
+-/* 2.4.13 => 2.4.3 */
+-#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0xd) )
+-
+-/**************************************/
+-/* PCI DMA MAPPING */
+-
+-#if defined(CONFIG_HIGHMEM)
+-
+-#ifndef PCI_DRAM_OFFSET
+-#define PCI_DRAM_OFFSET 0
+-#endif
+-
+-u64 _kc_pci_map_page(struct pci_dev *dev,
+- struct page *page,
+- unsigned long offset,
+- size_t size,
+- int direction)
+-{
+- u64 ret_val;
+- ret_val = (((u64)(page - mem_map) << PAGE_SHIFT) + offset +
+- PCI_DRAM_OFFSET);
+- return ret_val;
+-}
+-
+-#else /* CONFIG_HIGHMEM */
+-
+-u64 _kc_pci_map_page(struct pci_dev *dev,
+- struct page *page,
+- unsigned long offset,
+- size_t size,
+- int direction)
+-{
+- return pci_map_single(dev, (void *)page_address(page) + offset,
+- size, direction);
+-}
+-
+-#endif /* CONFIG_HIGHMEM */
+-
+-void _kc_pci_unmap_page(struct pci_dev *dev,
+- u64 dma_addr,
+- size_t size,
+- int direction)
+-{
+- return pci_unmap_single(dev, dma_addr, size, direction);
+-}
+-
+-#endif /* 2.4.13 => 2.4.3 */
+-
+-
+-/*****************************************************************************/
+-/* 2.4.3 => 2.4.0 */
+-#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x3) )
+-
+-/**************************************/
+-/* PCI DRIVER API */
+-
+-int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask)
+-{
+- if(!pci_dma_supported(dev, mask)) {
+- return -EIO;
+- }
+- dev->dma_mask = mask;
+- return 0;
+-}
+-
+-int _kc_pci_request_regions(struct pci_dev *dev, char *res_name)
+-{
+- int i;
+-
+- for (i = 0; i < 0x6; i++) {
+- if (pci_resource_len(dev, i) == 0) {
+- continue;
+- }
+- if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+- if (!request_region(pci_resource_start(dev, i),
+- pci_resource_len(dev, i), res_name)) {
+- pci_release_regions(dev);
+- return -EBUSY;
+- }
+- } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
+- if (!request_mem_region(pci_resource_start(dev, i),
+- pci_resource_len(dev, i),
+- res_name)) {
+- pci_release_regions(dev);
+- return -EBUSY;
+- }
+- }
+- }
+- return 0;
+-}
+-
+-void _kc_pci_release_regions(struct pci_dev *dev)
+-{
+- int i;
+-
+- for (i = 0; i < 0x6; i++) {
+- if (pci_resource_len(dev, i) == 0) {
+- continue;
+- }
+- if (pci_resource_flags(dev, i) & IORESOURCE_IO){
+- release_region(pci_resource_start(dev, i),
+- pci_resource_len(dev, i));
+- } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
+- release_mem_region(pci_resource_start(dev, i),
+- pci_resource_len(dev, i));
+- }
+- }
+-}
+-
+-/**************************************/
+-/* NETWORK DRIVER API */
+-
+-struct net_device * _kc_alloc_etherdev(int sizeof_priv)
+-{
+- struct net_device *dev;
+- int alloc_size;
+-
+- alloc_size = sizeof(*dev) + sizeof_priv + IFNAMSIZ + 0x1f;
+-
+- dev = kmalloc(alloc_size, GFP_KERNEL);
+-
+- if (!dev) { return NULL; }
+-
+- memset(dev, 0, alloc_size);
+-
+- if (sizeof_priv) {
+- dev->priv = (void *) (((unsigned long)(dev + 1) + 0x1f) & ~0x1f);
+- }
+- dev->name[0] = '\0';
+-
+- ether_setup(dev);
+-
+- return dev;
+-}
+-
+-int _kc_is_valid_ether_addr(u8 *addr)
+-{
+- const char zaddr[0x6] = {0,};
+-
+- return !(addr[0]&1) && memcmp( addr, zaddr, 0x6);
+-}
+-
+-#endif /* 2.4.3 => 2.4.0 */
+-
+-
+-/*****************************************************************/
+-/* 2.4.6 => 2.4.3 */
+-#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x6) )
+-
+-int _kc_pci_set_power_state(struct pci_dev *dev, int state)
+-{ return 0; }
+-int _kc_pci_save_state(struct pci_dev *dev, u32 *buffer)
+-{ return 0; }
+-int _kc_pci_restore_state(struct pci_dev *pdev, u32 *buffer)
+-{ return 0; }
+-int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable)
+-{ return 0; }
+-
+-#endif /* 2.4.6 => 2.4.3 */
+-
+-
++ version: Embedded.Release.Patch.L.1.0.7-5
++
++ Contact Information:
++
++ Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
++
++**************************************************************/
++/**************************************************************************
++ * @ingroup KCOMPAT_GENERAL
++ *
++ * @file kcompat.c
++ *
++ * @description
++ *
++ *
++ **************************************************************************/
++#include "kcompat.h"
++
++/*************************************************************/
++/* 2.4.13 => 2.4.3 */
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0xd) )
++
++/**************************************/
++/* PCI DMA MAPPING */
++
++#if defined(CONFIG_HIGHMEM)
++
++#ifndef PCI_DRAM_OFFSET
++#define PCI_DRAM_OFFSET 0
++#endif
++
++u64 _kc_pci_map_page(struct pci_dev *dev,
++ struct page *page,
++ unsigned long offset,
++ size_t size,
++ int direction)
++{
++ u64 ret_val;
++ ret_val = (((u64)(page - mem_map) << PAGE_SHIFT) + offset +
++ PCI_DRAM_OFFSET);
++ return ret_val;
++}
++
++#else /* CONFIG_HIGHMEM */
++
++u64 _kc_pci_map_page(struct pci_dev *dev,
++ struct page *page,
++ unsigned long offset,
++ size_t size,
++ int direction)
++{
++ return pci_map_single(dev, (void *)page_address(page) + offset,
++ size, direction);
++}
++
++#endif /* CONFIG_HIGHMEM */
++
++void _kc_pci_unmap_page(struct pci_dev *dev,
++ u64 dma_addr,
++ size_t size,
++ int direction)
++{
++ return pci_unmap_single(dev, dma_addr, size, direction);
++}
++
++#endif /* 2.4.13 => 2.4.3 */
++
++
++/*****************************************************************************/
++/* 2.4.3 => 2.4.0 */
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x3) )
++
++/**************************************/
++/* PCI DRIVER API */
++
++int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask)
++{
++ if(!pci_dma_supported(dev, mask)) {
++ return -EIO;
++ }
++ dev->dma_mask = mask;
++ return 0;
++}
++
++int _kc_pci_request_regions(struct pci_dev *dev, char *res_name)
++{
++ int i;
++
++ for (i = 0; i < 0x6; i++) {
++ if (pci_resource_len(dev, i) == 0) {
++ continue;
++ }
++ if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
++ if (!request_region(pci_resource_start(dev, i),
++ pci_resource_len(dev, i), res_name)) {
++ pci_release_regions(dev);
++ return -EBUSY;
++ }
++ } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
++ if (!request_mem_region(pci_resource_start(dev, i),
++ pci_resource_len(dev, i),
++ res_name)) {
++ pci_release_regions(dev);
++ return -EBUSY;
++ }
++ }
++ }
++ return 0;
++}
++
++void _kc_pci_release_regions(struct pci_dev *dev)
++{
++ int i;
++
++ for (i = 0; i < 0x6; i++) {
++ if (pci_resource_len(dev, i) == 0) {
++ continue;
++ }
++ if (pci_resource_flags(dev, i) & IORESOURCE_IO){
++ release_region(pci_resource_start(dev, i),
++ pci_resource_len(dev, i));
++ } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
++ release_mem_region(pci_resource_start(dev, i),
++ pci_resource_len(dev, i));
++ }
++ }
++}
++
++/**************************************/
++/* NETWORK DRIVER API */
++
++struct net_device * _kc_alloc_etherdev(int sizeof_priv)
++{
++ struct net_device *dev;
++ int alloc_size;
++
++ alloc_size = sizeof(*dev) + sizeof_priv + IFNAMSIZ + 0x1f;
++
++ dev = kmalloc(alloc_size, GFP_KERNEL);
++
++ if (!dev) { return NULL; }
++
++ memset(dev, 0, alloc_size);
++
++ if (sizeof_priv) {
++ dev->priv = (void *) (((unsigned long)(dev + 1) + 0x1f) & ~0x1f);
++ }
++ dev->name[0] = '\0';
++
++ ether_setup(dev);
++
++ return dev;
++}
++
++int _kc_is_valid_ether_addr(u8 *addr)
++{
++ const char zaddr[0x6] = {0,};
++
++ return !(addr[0]&1) && memcmp( addr, zaddr, 0x6);
++}
++
++#endif /* 2.4.3 => 2.4.0 */
++
++
++/*****************************************************************/
++/* 2.4.6 => 2.4.3 */
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x6) )
++
++int _kc_pci_set_power_state(struct pci_dev *dev, int state)
++{ return 0; }
++int _kc_pci_save_state(struct pci_dev *dev, u32 *buffer)
++{ return 0; }
++int _kc_pci_restore_state(struct pci_dev *pdev, u32 *buffer)
++{ return 0; }
++int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable)
++{ return 0; }
++
++#endif /* 2.4.6 => 2.4.3 */
++
++
++
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,24) )
++
++void dump_stack(void)
++{
++}
++
++#endif /* 2.4.24 */
++
+--- a/Embedded/src/GbE/kcompat_ethtool.c
++++ b/Embedded/src/GbE/kcompat_ethtool.c
+@@ -2,7 +2,7 @@
+ /*
+ * GPL LICENSE SUMMARY
+ *
+- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@
+ * Contact Information:
+ * Intel Corporation
+ *
+- * version: Embedded.L.1.0.34
++ * version: Embedded.Release.Patch.L.1.0.7-5
+ */
+
+ /**************************************************************************
+@@ -779,6 +779,7 @@ static int ethtool_get_stats(struct net_
+ }
+
+ /* The main entry point in this file. Called from net/core/dev.c */
++
+ #define ETHTOOL_OPS_COMPAT
+ int ethtool_ioctl(struct ifreq *ifr)
+ {
+--- a/Embedded/src/GbE/kcompat.h
++++ b/Embedded/src/GbE/kcompat.h
+@@ -2,7 +2,7 @@
+
+ GPL LICENSE SUMMARY
+
+- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of version 2 of the GNU General Public License as
+@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
+ Contact Information:
+ Intel Corporation
+
+- version: Embedded.L.1.0.34
++ version: Embedded.Release.Patch.L.1.0.7-5
+
+ Contact Information:
+
+@@ -69,15 +69,6 @@ GPL LICENSE SUMMARY
+ #define CONFIG_NET_POLL_CONTROLLER
+ #endif
+
+-#ifdef E1000_NAPI
+-#undef CONFIG_E1000_NAPI
+-#define CONFIG_E1000_NAPI
+-#endif
+-
+-#ifdef E1000_NO_NAPI
+-#undef CONFIG_E1000_NAPI
+-#endif
+-
+ #ifndef module_param
+ #define module_param(v,t,p) MODULE_PARM(v, "i");
+ #endif
+@@ -554,35 +545,14 @@ extern void _kc_pci_unmap_page(struct pc
+ #endif
+
+ /*****************************************************************************/
+-/* 2.4.23 => 2.4.22 */
+-#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) )
+-#ifdef CONFIG_E1000_NAPI
+-#ifndef netif_poll_disable
+-#define netif_poll_disable(x) _kc_netif_poll_disable(x)
+-static inline void _kc_netif_poll_disable(struct net_device *netdev)
+-{
+- while (test_and_set_bit(__LINK_STATE_RX_SCHED, &netdev->state)) {
+- /* No hurry */
+- current->state = TASK_INTERRUPTIBLE;
+- schedule_timeout(1);
+- }
+-}
+-#endif
+-#ifndef netif_poll_enable
+-#define netif_poll_enable(x) _kc_netif_poll_enable(x)
+-static inline void _kc_netif_poll_enable(struct net_device *netdev)
+-{
+- clear_bit(__LINK_STATE_RX_SCHED, &netdev->state);
+-}
+-#endif
+-#endif
+-#endif
+-
+-/*****************************************************************************/
+ /* 2.5.28 => 2.4.23 */
+ #if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) )
+
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) )
++static inline void _kc_synchronize_irq(void) { barrier(); }
++#else
+ static inline void _kc_synchronize_irq() { synchronize_irq(); }
++#endif /* 2.4.23 */
+ #undef synchronize_irq
+ #define synchronize_irq(X) _kc_synchronize_irq()
+
+@@ -747,6 +717,37 @@ static inline struct mii_ioctl_data *_kc
+ #define skb_header_cloned(x) 0
+ #endif /* SKB_DATAREF_SHIFT not defined */
+
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) )
++
++#define ioread32(addr) readl(addr)
++#define iowrite32(val,addr) writel(val,addr)
++
++#endif /* 2.6.10 */
++
++#ifndef DEFINE_SPINLOCK
++#define DEFINE_SPINLOCK(s) spinlock_t s = SPIN_LOCK_UNLOCKED
++#endif /* DEFINE_SPINLOCK */
++
++#ifndef PCI_COMMAND_INTX_DISABLE
++#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
++#endif /* PCI_COMMAND_INTX_DISABLE */
++
++#ifndef ETH_GSTRING_LEN
++#define ETH_GSTRING_LEN 32
++#endif /* ETH_GSTRING_LEN */
++
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,24) )
++
++extern void dump_stack(void);
++
++#undef register_reboot_notifier
++#define register_reboot_notifier(a)
++
++#undef unregister_reboot_notifier
++#define unregister_reboot_notifier(a)
++
++#endif /* 2.4.24 */
++
+ #endif /* _KCOMPAT_H_ */
+
+
+--- a/Embedded/src/GbE/Makefile
++++ b/Embedded/src/GbE/Makefile
+@@ -1,6 +1,6 @@
+ # GPL LICENSE SUMMARY
+ #
+-# Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
++# Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ #
+ # This program is free software; you can redistribute it and/or modify
+ # it under the terms of version 2 of the GNU General Public License as
+@@ -20,7 +20,7 @@
+ # Contact Information:
+ # Intel Corporation
+ #
+-# version: Embedded.L.1.0.34
++# version: Embedded.Release.Patch.L.1.0.7-5
+
+ ###########################################################################
+ # Driver files
+@@ -35,6 +35,8 @@ MDIO_PHONY_CFILES = gcu.c
+ MDIO_CFILES = gcu_main.c gcu_if.c
+ MDIO_HFILES = gcu.h gcu_if.h gcu_reg.h kcompat.h
+
++KVER=$(shell uname -r)
++
+ #
+ # Variables:
+ # KSRC (path to kernel source to build against)
+@@ -50,45 +52,16 @@ MDIO_HFILES = gcu.h gcu_if.h gcu_reg.h k
+
+ # set KSRC, KOBJ, and EXTERNAL_MDIO to default values of not already set
+ #
+-KOBJ ?= /usr/src/kernels/linux
+-KSRC ?= /usr/src/kernels/linux
++#KOBJ=/usr/src/kernels/linux
++#KSRC=/usr/src/kernels/linux
++#KSRC=$(KOBJ)
+ EXTERNAL_MDIO ?= 1
+ GBE_NAME = iegbe
+ GCU_NAME = gcu
+
+-# By default the workaround for the IEGBE writeback issue is enabled
+-#
+-IEGBE_GBE_WORKAROUND ?= 0
+-
+-# If the platform only supports 10/100 this variable needs to be set
+-# so the default advertisement is set appropriately.
+-# By default, this variable will be disabled.
+-#
+-IEGBE_10_100_ONLY ?= 0
+-
+-# check for version.h and autoconf.h for running kernel in /boot (SUSE)
+-ifneq (,$(wildcard /boot/vmlinuz.version.h))
+- VERSION_FILE := /boot/vmlinuz.version.h
+- CONFIG_FILE := /boot/vmlinuz.autoconf.h
+- KVER := $(shell $(CC) $(CFLAGS) -E -dM $(VERSION_FILE) | \
+- grep UTS_RELEASE | awk '{ print $$3 }' | sed 's/\"//g')
+- ifeq ($(KVER),$(shell uname -r))
+- # set up include path to override headers from kernel source
+- x:=$(shell rm -rf include)
+- x:=$(shell mkdir -p include/linux)
+- x:=$(shell cp /boot/vmlinuz.version.h include/linux/version.h)
+- x:=$(shell cp /boot/vmlinuz.autoconf.h include/linux/autoconf.h)
+- CFLAGS += -I./include
+- else
+- VERSION_FILE := $(KOBJ)/include/linux/version.h
+- UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
+- CONFIG_FILE := $(KOBJ)/include/linux/autoconf.h
+- endif
+-else
+- VERSION_FILE := $(KOBJ)/include/linux/version.h
+- UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
+- CONFIG_FILE := $(KOBJ)/include/linux/autoconf.h
+-endif
++VERSION_FILE := $(KSRC)/include/linux/version.h
++UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
++CONFIG_FILE := $(KSRC)/include/linux/autoconf.h
+
+ ifeq (,$(wildcard $(VERSION_FILE)))
+ $(error Linux kernel source not configured - missing version.h)
+@@ -98,83 +71,8 @@ ifeq (,$(wildcard $(CONFIG_FILE)))
+ $(error Linux kernel source not configured - missing autoconf.h)
+ endif
+
+-# as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
+-# so check that file for kernel version string instead of version.h
+-USE_UTS_REL := $(shell [ -f $(UTS_REL_FILE) ] && echo "1")
+-
+-# pick a compiler
+-ifneq (,$(findstring egcs-2.91.66, $(shell cat /proc/version)))
+- CC := kgcc gcc cc
+-else
+- CC := gcc cc
+-endif
+-test_cc = $(shell $(cc) --version > /dev/null 2>&1 && echo $(cc))
+-CC := $(foreach cc, $(CC), $(test_cc))
+-CC := $(firstword $(CC))
+-ifeq (,$(CC))
+- $(error Compiler not found)
+-endif
+-
+-# we need to know what platform the driver is being built on
+-# some additional features are only built on Intel platforms
+-ARCH := $(shell uname -m | sed 's/i.86/i386/')
+-ifeq ($(ARCH),alpha)
+- CFLAGS += -ffixed-8 -mno-fp-regs
+-endif
+-ifeq ($(ARCH),x86_64)
+- CFLAGS += -mcmodel=kernel -mno-red-zone
+-endif
+-ifeq ($(ARCH),ppc)
+- CFLAGS += -msoft-float
+-endif
+-ifeq ($(ARCH),ppc64)
+- CFLAGS += -m64 -msoft-float
+- LDFLAGS += -melf64ppc
+-endif
+-
+-# standard flags for module builds
+-CFLAGS += -DLINUX -D__KERNEL__ -DMODULE -O2 -pipe -Wall
+-CFLAGS += -I$(KSRC)/include -I.
+-CFLAGS += $(shell [ -f $(KSRC)/include/linux/modversions.h ] && \
+- echo "-DMODVERSIONS -DEXPORT_SYMTAB \
+- -include $(KSRC)/include/linux/modversions.h")
+-
+-ifeq ($(IEGBE_GBE_WORKAROUND), 1)
+-CFLAGS += -DIEGBE_GBE_WORKAROUND -DE1000_NO_NAPI
+-endif
+-
+-ifeq ($(IEGBE_10_100_ONLY), 1)
+-CFLAGS += -DIEGBE_10_100_ONLY
+-endif
+-
+-CFLAGS += $(CFLAGS_EXTRA)
+-#ifeq (,$(shell echo $(CFLAGS_EXTRA) | grep NAPI))
+-#CFLAGS += -DE1000_NO_NAPI
+-#CFLAGS_EXTRA += -DE1000_NO_NAPI
+-#endif
+-
+-RHC := $(KSRC)/include/linux/rhconfig.h
+-ifneq (,$(wildcard $(RHC)))
+- # 7.3 typo in rhconfig.h
+- ifneq (,$(shell $(CC) $(CFLAGS) -E -dM $(RHC) | grep __module__bigmem))
+- CFLAGS += -D__module_bigmem
+- endif
+-endif
+-
+-# get the kernel version - we use this to find the correct install path
+-ifeq ($(USE_UTS_REL), 1)
+- KVER := $(shell $(CC) $(CFLAGS) -E -dM $(UTS_REL_FILE) | grep UTS_RELEASE | \
+- awk '{ print $$3 }' | sed 's/\"//g')
+-else
+- KVER := $(shell $(CC) $(CFLAGS) -E -dM $(VERSION_FILE) | grep UTS_RELEASE | \
+- awk '{ print $$3 }' | sed 's/\"//g')
+-endif
+-
+-KKVER := $(shell echo $(KVER) | \
+- awk '{ if ($$0 ~ /2\.[6-9]\./) print "1"; else print "0"}')
+-ifeq ($(KKVER), 0)
+- $(error *** Aborting the build. \
+- *** This driver is not supported on kernel versions older than 2.6.18)
++ifeq (,$(wildcard $(UTS_REL_FILE)))
++ $(error Linux kernel source not configured - missing utsrelease.h)
+ endif
+
+ # set the install path
+@@ -202,11 +100,11 @@ ifneq ($(SMP),$(shell uname -a | grep SM
+ endif
+
+ ifeq ($(SMP),1)
+- CFLAGS += -D__SMP__
++ EXTRA_CFLAGS += -D__SMP__
+ endif
+
+ ifeq ($(EXTERNAL_MDIO), 1)
+- CFLAGS += -DEXTERNAL_MDIO
++ EXTRA_CFLAGS += -DEXTERNAL_MDIO
+ endif
+
+ ###########################################################################
+@@ -223,7 +121,6 @@ MANSECTION = 7
+ MANFILE = $(TARGET:.ko=.$(MANSECTION))
+
+ ifneq ($(PATCHLEVEL),)
+- EXTRA_CFLAGS += $(CFLAGS_EXTRA)
+ obj-m += $(TARGET:.ko=.o)
+ iegbe-objs := $(CFILES:.c=.o)
+ ifeq ($(EXTERNAL_MDIO),1)
+--- a/filelist
++++ b/filelist
+@@ -1,41 +1,3 @@
+-Embedded/Makefile
+-Embedded/environment.mk
+-Embedded/src/1588/1588.c
+-Embedded/src/1588/1588.h
+-Embedded/src/1588/IxTimeSyncAcc_p.h
+-Embedded/src/1588/Makefile
+-Embedded/src/1588/ixtimesyncacc.c
+-Embedded/src/1588/ixtimesyncacc.h
+-Embedded/src/1588/linux_ioctls.h
+-Embedded/src/CAN/Makefile
+-Embedded/src/CAN/can_fifo.c
+-Embedded/src/CAN/can_fifo.h
+-Embedded/src/CAN/can_ioctl.h
+-Embedded/src/CAN/can_main.c
+-Embedded/src/CAN/can_main.h
+-Embedded/src/CAN/can_port.h
+-Embedded/src/CAN/icp_can.c
+-Embedded/src/CAN/icp_can.h
+-Embedded/src/CAN/icp_can_regs.h
+-Embedded/src/CAN/icp_can_types.h
+-Embedded/src/CAN/icp_can_user.h
+-Embedded/src/EDMA/Makefile
+-Embedded/src/EDMA/dma.h
+-Embedded/src/EDMA/dma_api.h
+-Embedded/src/EDMA/dma_client_api.c
+-Embedded/src/EDMA/dma_common.c
+-Embedded/src/EDMA/dma_internals.h
+-Embedded/src/EDMA/dma_linux.c
+-Embedded/src/EDMA/os/os.c
+-Embedded/src/EDMA/os/os.h
+-Embedded/src/EDMA/os/os_list.c
+-Embedded/src/EDMA/os/os_list.h
+-Embedded/src/EDMA/os/os_types.h
+-Embedded/src/GPIO/Makefile
+-Embedded/src/GPIO/common.h
+-Embedded/src/GPIO/gpio.h
+-Embedded/src/GPIO/gpio_ref.c
+-Embedded/src/GPIO/linux_ioctls.h
+ Embedded/src/GbE/Makefile
+ Embedded/src/GbE/gcu.h
+ Embedded/src/GbE/gcu_if.c
+@@ -55,16 +17,6 @@ Embedded/src/GbE/iegbe_param.c
+ Embedded/src/GbE/kcompat.c
+ Embedded/src/GbE/kcompat.h
+ Embedded/src/GbE/kcompat_ethtool.c
+-Embedded/src/WDT/Makefile
+-Embedded/src/WDT/iwdt.c
+-Embedded/src/WDT/iwdt.h
+-Embedded/src/patches/Intel_EP80579_RHEL5.patch
+-Embedded/src/patches/pci.ids_RHEL5.patch
+ LICENSE.GPL
+-build_system/build_files/Core/ia.mk
+-build_system/build_files/OS/linux_2.6.mk
+-build_system/build_files/OS/linux_2.6_kernel_space_rules.mk
+-build_system/build_files/common.mk
+-build_system/build_files/rules.mk
+ filelist
+ versionfile
+--- a/versionfile
++++ b/versionfile
+@@ -1,4 +1,4 @@
+-PACKAGE_TYPE=Embedded
++PACKAGE_TYPE=Embedded.Release.Patch
+
+ PACKAGE_OS=L
+
+@@ -6,4 +6,6 @@ PACKAGE_VERSION_MAJOR_NUMBER=1
+
+ PACKAGE_VERSION_MINOR_NUMBER=0
+
+-PACKAGE_VERSION_PATCH_NUMBER=34
++PACKAGE_VERSION_PATCH_NUMBER=7
++
++PACKAGE_VERSION_BUILD_NUMBER=5
diff --git a/package/ep80579-drivers/patches/002-cflags_cleanup.patch b/package/ep80579-drivers/patches/002-cflags_cleanup.patch
new file mode 100644
index 0000000000..f897527956
--- /dev/null
+++ b/package/ep80579-drivers/patches/002-cflags_cleanup.patch
@@ -0,0 +1,22 @@
+--- a/build_system/build_files/common.mk
++++ b/build_system/build_files/common.mk
+@@ -122,7 +122,7 @@ CC=$(COMPILER)
+ LD=$(LINKER)
+ AR=$(ARCHIVER)
+
+-CFLAGS+=-O2
++#CFLAGS+=-O2
+
+
+ PWD= $(shell pwd)
+--- a/build_system/build_files/OS/linux_2.6.mk
++++ b/build_system/build_files/OS/linux_2.6.mk
+@@ -80,7 +80,7 @@ endif
+
+
+ ifeq ($(OS_LEVEL), kernel_space)
+-CFLAGS+=
++#CFLAGS+=
+ endif
+
+
diff --git a/package/ep80579-drivers/patches/003-new_irqf_constants.patch b/package/ep80579-drivers/patches/003-new_irqf_constants.patch
new file mode 100644
index 0000000000..af231f2184
--- /dev/null
+++ b/package/ep80579-drivers/patches/003-new_irqf_constants.patch
@@ -0,0 +1,53 @@
+--- a/Embedded/src/1588/1588.c
++++ b/Embedded/src/1588/1588.c
+@@ -291,7 +291,7 @@ int pci_probe(struct pci_dev *dev, const
+
+ }
+
+- if ( request_irq(dev->irq, &timesync_isr, SA_SHIRQ, DRIVERNAME,
++ if ( request_irq(dev->irq, &timesync_isr, IRQF_SHARED, DRIVERNAME,
+ &g_drvr_data) )
+ {
+ printk("%s-pci_probe: irq\n", DRIVERNAME);
+--- a/Embedded/src/CAN/can_main.c
++++ b/Embedded/src/CAN/can_main.c
+@@ -424,7 +424,7 @@ int can_open(struct inode *inode, struct
+ err = request_irq(
+ can_os->irq,
+ can_irq_handler,
+- SA_SHIRQ,
++ IRQF_SHARED,
+ iminor(can_os->inode) ? CAN_PROC_1 : CAN_PROC_0,
+ &(g_can_os[iminor(can_os->inode)])
+ );
+--- a/Embedded/src/EDMA/dma_linux.c
++++ b/Embedded/src/EDMA/dma_linux.c
+@@ -367,7 +367,7 @@ int32_t edma_resume(struct pci_dev *dev)
+ return -ENODEV;
+ }
+
+- if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
++ if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
+ g_char_drvr_name, dev) )
+ {
+
+@@ -829,7 +829,7 @@ int32_t edma_probe(struct pci_dev * dev,
+ /*
+ * Obtain a (shared) Interrupt Request (IRQ) Line from the OS.
+ */
+- if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
++ if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
+ g_char_drvr_name, dev) )
+ {
+
+--- a/Embedded/src/WDT/iwdt.c
++++ b/Embedded/src/WDT/iwdt.c
+@@ -1461,7 +1461,7 @@ static int __init wdt_init_one(struct pc
+
+ /* Request irq only if wdt_irq is other than 0 */
+ if (wdt_irq) {
+- if (request_irq(wdt_irq, wdt_isr, SA_INTERRUPT | SA_SHIRQ,
++ if (request_irq(wdt_irq, wdt_isr, IRQF_DISABLED | IRQF_SHARED,
+ "iwdt", &wdt_miscdev)) {
+ printk("IRQ %d is not free.\n", wdt_irq);
+ return -EIO;
diff --git a/package/ep80579-drivers/patches/100-iegbe_netdev_ops.patch b/package/ep80579-drivers/patches/100-iegbe_netdev_ops.patch
new file mode 100644
index 0000000000..ab23da63ff
--- /dev/null
+++ b/package/ep80579-drivers/patches/100-iegbe_netdev_ops.patch
@@ -0,0 +1,56 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -724,6 +724,26 @@ static void iegbe_dump_eeprom(struct ieg
+ kfree(data);
+ }
+
++static const struct net_device_ops iegbe_netdev_ops = {
++ .ndo_open = iegbe_open,
++ .ndo_stop = iegbe_close,
++ .ndo_start_xmit = iegbe_xmit_frame,
++ .ndo_get_stats = iegbe_get_stats,
++ .ndo_set_rx_mode = iegbe_set_rx_mode,
++ .ndo_set_mac_address = iegbe_set_mac,
++ .ndo_tx_timeout = iegbe_tx_timeout,
++ .ndo_change_mtu = iegbe_change_mtu,
++ .ndo_do_ioctl = iegbe_ioctl,
++ .ndo_validate_addr = eth_validate_addr,
++
++ .ndo_vlan_rx_register = iegbe_vlan_rx_register,
++ .ndo_vlan_rx_add_vid = iegbe_vlan_rx_add_vid,
++ .ndo_vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid,
++#ifdef CONFIG_NET_POLL_CONTROLLER
++ .ndo_poll_controller = iegbe_netpoll,
++#endif
++};
++
+ /**
+ * iegbe_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+@@ -800,24 +820,11 @@ static int __devinit iegbe_probe(struct
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+- netdev->open = &iegbe_open;
+- netdev->stop = &iegbe_close;
+- netdev->hard_start_xmit = &iegbe_xmit_frame;
+- netdev->get_stats = &iegbe_get_stats;
+- netdev->set_rx_mode = &iegbe_set_rx_mode;
+- netdev->set_mac_address = &iegbe_set_mac;
+- netdev->change_mtu = &iegbe_change_mtu;
+- netdev->do_ioctl = &iegbe_ioctl;
++ netdev->netdev_ops = &iegbe_netdev_ops;
+ set_ethtool_ops(netdev);
+- netdev->tx_timeout = &iegbe_tx_timeout;
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
+- netdev->vlan_rx_register = iegbe_vlan_rx_register;
+- netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
+- netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
+-#ifdef CONFIG_NET_POLL_CONTROLLER
+- netdev->poll_controller = iegbe_netpoll;
+-#endif
++
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+
diff --git a/package/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch b/package/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch
new file mode 100644
index 0000000000..921d464bad
--- /dev/null
+++ b/package/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch
@@ -0,0 +1,41 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -3465,12 +3465,12 @@ static irqreturn_t iegbe_intr_msi(int ir
+ printk("Critical error! ICR = 0x%x\n", icr);
+ return IRQ_HANDLED;
+ }
+- if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
++ if (likely(napi_schedule_prep(&adapter->napi))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+- __netif_rx_schedule(netdev, &adapter->napi);
++ __napi_schedule(&adapter->napi);
+ } else
+ iegbe_irq_enable(adapter);
+
+@@ -3527,12 +3527,12 @@ iegbe_intr(int irq, void *data)
+ E1000_WRITE_REG(&adapter->hw, IMC, ~0);
+ E1000_WRITE_FLUSH(&adapter->hw);
+ }
+- if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
++ if (likely(napi_schedule_prep(&adapter->napi))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+- __netif_rx_schedule(netdev, &adapter->napi);
++ __napi_schedule(&adapter->napi);
+ } else
+ /* this really should not happen! if it does it is basically a
+ * bug, but not a hard error, so enable ints and continue */
+@@ -3574,7 +3574,7 @@ static int iegbe_clean(struct napi_struc
+ if (work_done < budget) {
+ if (likely(adapter->itr_setting & 3))
+ iegbe_set_itr(adapter);
+- netif_rx_complete(poll_dev, napi);
++ napi_complete(napi);
+ iegbe_irq_enable(adapter);
+ }
+
diff --git a/package/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch b/package/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch
new file mode 100644
index 0000000000..7147449c24
--- /dev/null
+++ b/package/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch
@@ -0,0 +1,103 @@
+--- a/Embedded/src/GbE/iegbe.h
++++ b/Embedded/src/GbE/iegbe.h
+@@ -316,7 +316,6 @@ struct iegbe_adapter {
+ int cleaned_count);
+ struct iegbe_rx_ring *rx_ring; /* One per active queue */
+ struct napi_struct napi;
+- struct net_device *polling_netdev; /* One per active queue */
+
+ int num_tx_queues;
+ int num_rx_queues;
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -763,7 +763,7 @@ static int __devinit iegbe_probe(struct
+ struct iegbe_hw *hw;
+
+ static int cards_found = 0;
+- int i, err, pci_using_dac;
++ int err, pci_using_dac;
+ u16 eeprom_data = 0;
+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars;
+@@ -984,11 +984,8 @@ err_eeprom:
+ iegbe_phy_hw_reset(hw);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+- for (i = 0; i < adapter->num_rx_queues; i++)
+- dev_put(&adapter->polling_netdev[i]);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+- kfree(adapter->polling_netdev);
+ err_sw_init:
+ iounmap(hw->hw_addr);
+ err_ioremap:
+@@ -1017,7 +1014,6 @@ iegbe_remove(struct pci_dev *pdev)
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct iegbe_adapter *adapter = netdev_priv(netdev);
+ uint32_t manc;
+- int i;
+
+ if(adapter->hw.mac_type >= iegbe_82540
+ && adapter->hw.mac_type != iegbe_icp_xxxx
+@@ -1030,15 +1026,11 @@ iegbe_remove(struct pci_dev *pdev)
+ }
+
+ unregister_netdev(netdev);
+- for (i = 0x0; i < adapter->num_rx_queues; i++)
+- dev_put(&adapter->polling_netdev[i]);
+-
+ if(!iegbe_check_phy_reset_block(&adapter->hw)) {
+ iegbe_phy_hw_reset(&adapter->hw);
+ }
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+- kfree(adapter->polling_netdev);
+
+ iounmap(adapter->hw.hw_addr);
+ pci_release_regions(pdev);
+@@ -1061,7 +1053,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
+ struct iegbe_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+- int i;
+
+ /* PCI config space info */
+
+@@ -1111,11 +1102,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
+ return -ENOMEM;
+ }
+
+- for (i = 0; i < adapter->num_rx_queues; i++) {
+- adapter->polling_netdev[i].priv = adapter;
+- dev_hold(&adapter->polling_netdev[i]);
+- set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
+- }
+ spin_lock_init(&adapter->tx_queue_lock);
+
+ /*
+@@ -1137,8 +1123,7 @@ iegbe_sw_init(struct iegbe_adapter *adap
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+- * number of queues at compile-time. The polling_netdev array is
+- * intended for Multiqueue, but should work fine with a single queue.
++ * number of queues at compile-time.
+ **/
+
+ static int __devinit
+@@ -1158,15 +1143,6 @@ iegbe_alloc_queues(struct iegbe_adapter
+ return -ENOMEM;
+ }
+
+- adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
+- sizeof(struct net_device),
+- GFP_KERNEL);
+- if (!adapter->polling_netdev) {
+- kfree(adapter->tx_ring);
+- kfree(adapter->rx_ring);
+- return -ENOMEM;
+- }
+-
+ return E1000_SUCCESS;
+ }
+
diff --git a/package/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch b/package/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch
new file mode 100644
index 0000000000..71d2d54e6b
--- /dev/null
+++ b/package/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch
@@ -0,0 +1,60 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -2161,7 +2161,8 @@ static void iegbe_set_rx_mode(struct net
+ {
+ struct iegbe_adapter *adapter = netdev_priv(netdev);
+ struct iegbe_hw *hw = &adapter->hw;
+- struct dev_addr_list *uc_ptr;
++ struct netdev_hw_addr *ha;
++ bool use_uc = false;
+ struct dev_addr_list *mc_ptr;
+ u32 rctl;
+ u32 hash_value;
+@@ -2187,12 +2188,11 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ }
+ }
+
+- uc_ptr = NULL;
+ if (netdev->uc_count > rar_entries - 1) {
+ rctl |= E1000_RCTL_UPE;
+ } else if (!(netdev->flags & IFF_PROMISC)) {
+ rctl &= ~E1000_RCTL_UPE;
+- uc_ptr = netdev->uc_list;
++ use_uc = true;
+ }
+
+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+@@ -2210,13 +2210,20 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ * if there are not 14 addresses, go ahead and clear the filters
+ * -- with 82571 controllers only 0-13 entries are filled here
+ */
++ i = 1;
++ if (use_uc)
++ list_for_each_entry(ha, &netdev->uc_list, list) {
++ if (i == rar_entries)
++ break;
++ iegbe_rar_set(hw, ha->addr, i++);
++ }
++
++ WARN_ON(i == rar_entries);
++
+ mc_ptr = netdev->mc_list;
+
+- for (i = 1; i < rar_entries; i++) {
+- if (uc_ptr) {
+- iegbe_rar_set(hw, uc_ptr->da_addr, i);
+- uc_ptr = uc_ptr->next;
+- } else if (mc_ptr) {
++ for (; i < rar_entries; i++) {
++ if (mc_ptr) {
+ iegbe_rar_set(hw, mc_ptr->da_addr, i);
+ mc_ptr = mc_ptr->next;
+ } else {
+@@ -2226,7 +2233,6 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ E1000_WRITE_FLUSH(&adapter->hw);
+ }
+ }
+- WARN_ON(uc_ptr != NULL);
+
+ /* clear the old settings from the multicast hash table */
+
diff --git a/package/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch b/package/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch
new file mode 100644
index 0000000000..c6eced6a5c
--- /dev/null
+++ b/package/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch
@@ -0,0 +1,20 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -2188,7 +2188,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ }
+ }
+
+- if (netdev->uc_count > rar_entries - 1) {
++ if (netdev->uc.count > rar_entries - 1) {
+ rctl |= E1000_RCTL_UPE;
+ } else if (!(netdev->flags & IFF_PROMISC)) {
+ rctl &= ~E1000_RCTL_UPE;
+@@ -2212,7 +2212,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ */
+ i = 1;
+ if (use_uc)
+- list_for_each_entry(ha, &netdev->uc_list, list) {
++ list_for_each_entry(ha, &netdev->uc.list, list) {
+ if (i == rar_entries)
+ break;
+ iegbe_rar_set(hw, ha->addr, i++);
diff --git a/package/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch b/package/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch
new file mode 100644
index 0000000000..c7a103b448
--- /dev/null
+++ b/package/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch
@@ -0,0 +1,20 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -775,13 +775,13 @@ static int __devinit iegbe_probe(struct
+ if (err)
+ return err;
+
+- if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+- !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
++ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
++ !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ pci_using_dac = 1;
+ } else {
+- err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
++ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+- err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
++ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ E1000_ERR("No usable DMA configuration, "
+ "aborting\n");
diff --git a/package/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch b/package/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch
new file mode 100644
index 0000000000..a08e8c7697
--- /dev/null
+++ b/package/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch
@@ -0,0 +1,12 @@
+--- a/Embedded/src/GbE/iegbe_ethtool.c
++++ b/Embedded/src/GbE/iegbe_ethtool.c
+@@ -944,7 +944,8 @@ iegbe_intr_test(struct iegbe_adapter *ad
+ *data = 0;
+
+ /* Hook up test interrupt handler just for this test */
+- if(!request_irq(irq, &iegbe_test_intr, 0, netdev->name, netdev)) {
++ if(!request_irq(irq, &iegbe_test_intr, IRQF_PROBE_SHARED, netdev->name,
++ netdev)) {
+ shared_int = FALSE;
+ } else if(request_irq(irq, &iegbe_test_intr, IRQF_SHARED,
+ netdev->name, netdev)){
diff --git a/package/ep80579-drivers/patches/150-ocracoke_island.patch b/package/ep80579-drivers/patches/150-ocracoke_island.patch
new file mode 100644
index 0000000000..34c11daac1
--- /dev/null
+++ b/package/ep80579-drivers/patches/150-ocracoke_island.patch
@@ -0,0 +1,747 @@
+--- a/Embedded/src/GbE/iegbe_oem_phy.c
++++ b/Embedded/src/GbE/iegbe_oem_phy.c
+@@ -65,6 +65,10 @@ static int32_t iegbe_oem_link_m88_setup(
+ static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
+ static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
+
++static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
++static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
++static int32_t oi_phy_setup (struct iegbe_hw *hw);
++
+ /**
+ * iegbe_oem_setup_link
+ * @hw: iegbe_hw struct containing device specific information
+@@ -114,6 +118,10 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+ }
+
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ return E1000_SUCCESS;
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ ret_val = iegbe_oem_link_m88_setup(hw);
+@@ -121,6 +129,12 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+ return ret_val;
+ }
+ break;
++ case BCM5481_PHY_ID:
++ ret_val = iegbe_oem_link_bcm5481_setup(hw);
++ if(ret_val) {
++ return ret_val;
++ }
++ break;
+ default:
+ DEBUGOUT("Invalid PHY ID\n");
+ return -E1000_ERR_PHY_TYPE;
+@@ -179,6 +193,51 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+ #endif /* ifdef EXTERNAL_MDIO */
+ }
+
++/**
++ * iegbe_oem_link_bcm5481_setup
++ * @hw: iegbe_hw struct containing device specific information
++ *
++ * Returns E1000_SUCCESS, negative E1000 error code on failure
++ *
++ * copied verbatim from iegbe_oem_link_m88_setup
++ **/
++static int32_t
++iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
++{
++ int32_t ret_val;
++ uint16_t phy_data;
++
++ //DEBUGFUNC(__func__);
++
++ if(!hw)
++ return -1;
++
++ /* phy_reset_disable is set in iegbe_oem_set_phy_mode */
++ if(hw->phy_reset_disable)
++ return E1000_SUCCESS;
++
++ // Enable MDIX in extended control reg.
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
++ if(ret_val)
++ {
++ DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
++ return ret_val;
++ }
++
++ phy_data &= ~BCM5481_ECTRL_DISMDIX;
++ ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
++ if(ret_val)
++ {
++ DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
++ return ret_val;
++ }
++
++ ret_val = oi_phy_setup (hw);
++ if (ret_val)
++ return ret_val;
++
++ return E1000_SUCCESS;
++}
+
+ /**
+ * iegbe_oem_link_m88_setup
+@@ -340,6 +399,11 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
+ * see iegbe_phy_force_speed_duplex, which does the following for M88
+ */
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ case BCM5481_PHY_ID:
++ DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ ret_val = iegbe_oem_read_phy_reg_ex(hw,
+@@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
++ case BCM5481_PHY_ID:
++ case BCM5395S_PHY_ID:
+ DEBUGOUT("No DSP to reset on OEM PHY\n");
+ break;
+ default:
+@@ -460,6 +526,11 @@ iegbe_oem_cleanup_after_phy_reset(struct
+ * see iegbe_phy_force_speed_duplex, which does the following for M88
+ */
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ case BCM5481_PHY_ID:
++ DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ /*
+@@ -573,6 +644,11 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
+ * use iegbe_set_phy_mode as example
+ */
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ case BCM5481_PHY_ID:
++ DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ ret_val = iegbe_read_eeprom(hw,
+@@ -641,6 +717,19 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
+ }
+ hw->phy_type = iegbe_phy_oem;
+
++{
++ // If MAC2 (BCM5395 switch), manually detect the phy
++ struct iegbe_adapter *adapter;
++ uint32_t device_number;
++ adapter = (struct iegbe_adapter *) hw->back;
++ device_number = PCI_SLOT(adapter->pdev->devfn);
++ if (device_number == ICP_XXXX_MAC_2) {
++ hw->phy_id = BCM5395S_PHY_ID;
++ hw->phy_revision = 0;
++ return E1000_SUCCESS;
++ }
++}
++
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
+ if(ret_val) {
+ DEBUGOUT("Unable to read PHY register PHY_ID1\n");
+@@ -690,6 +779,8 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
++ case BCM5481_PHY_ID:
++ case BCM5395S_PHY_ID:
+ phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
+ break;
+ default:
+@@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
++ case BCM5481_PHY_ID:
++ case BCM5395S_PHY_ID:
+ isCopper = TRUE;
+ break;
+ default:
+@@ -796,13 +889,13 @@ iegbe_oem_get_phy_dev_number(struct iegb
+ switch(device_number)
+ {
+ case ICP_XXXX_MAC_0:
+- hw->phy_addr = 0x00;
++ hw->phy_addr = 0x01;
+ break;
+ case ICP_XXXX_MAC_1:
+- hw->phy_addr = 0x01;
++ hw->phy_addr = 0x02;
+ break;
+ case ICP_XXXX_MAC_2:
+- hw->phy_addr = 0x02;
++ hw->phy_addr = 0x00;
+ break;
+ default: hw->phy_addr = 0x00;
+ }
+@@ -851,6 +944,12 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
+ if(!adapter || !ifr) {
+ return -1;
+ }
++
++ // If MAC2 (BCM5395 switch) then leave now
++ if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
++ return -1;
++ }
++
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if(mii_reg & MII_CR_POWER_DOWN) {
+@@ -987,6 +1086,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
+ * [10] = mdix mode
+ */
+ switch (adapter->hw.phy_id) {
++ case BCM5395S_PHY_ID:
++ case BCM5481_PHY_ID:
++ DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ if(corrected_len > 0) {
+@@ -1068,8 +1172,13 @@ iegbe_oem_phy_loopback(struct iegbe_adap
+ * Loopback configuration is the same for each of the supported PHYs.
+ */
+ switch (adapter->hw.phy_id) {
++ case BCM5395S_PHY_ID:
++ DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
++ case BCM5481_PHY_ID:
+
+ adapter->hw.autoneg = FALSE;
+
+@@ -1182,8 +1291,14 @@ iegbe_oem_loopback_cleanup(struct iegbe_
+ }
+
+ switch (adapter->hw.phy_id) {
++ case BCM5395S_PHY_ID:
++ DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
++ return;
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
++ case BCM5481_PHY_ID:
+ default:
+ adapter->hw.autoneg = TRUE;
+
+@@ -1243,6 +1358,11 @@ iegbe_oem_phy_speed_downgraded(struct ie
+ */
+
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ case BCM5481_PHY_ID:
++ *isDowngraded = 0;
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
+@@ -1305,6 +1425,11 @@ iegbe_oem_check_polarity(struct iegbe_hw
+ */
+
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ case BCM5481_PHY_ID:
++ *polarity = 0;
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ /* return the Polarity bit in the Status register. */
+@@ -1367,6 +1492,25 @@ iegbe_oem_phy_is_full_duplex(struct iegb
+ */
+
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ /* Always full duplex */
++ *isFD = 1;
++ break;
++
++ case BCM5481_PHY_ID:
++ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
++ if(ret_val) return ret_val;
++
++ switch (BCM5481_ASTAT_HCD(phy_data)) {
++ case BCM5481_ASTAT_1KBTFD:
++ case BCM5481_ASTAT_100BTXFD:
++ *isFD = 1;
++ break;
++ default:
++ *isFD = 0;
++ }
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
+@@ -1423,6 +1567,25 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
+ */
+
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ /* Always 1000mb */
++ *is1000 = 1;
++ break;
++
++ case BCM5481_PHY_ID:
++ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
++ if(ret_val) return ret_val;
++
++ switch (BCM5481_ASTAT_HCD(phy_data)) {
++ case BCM5481_ASTAT_1KBTFD:
++ case BCM5481_ASTAT_1KBTHD:
++ *is1000 = 1;
++ break;
++ default:
++ *is1000 = 0;
++ }
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
+@@ -1478,6 +1641,25 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
+ * see iegbe_config_mac_to_phy
+ */
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ /* Always 1000Mb, never 100mb */
++ *is100 = 0;
++ break;
++
++ case BCM5481_PHY_ID:
++ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
++ if(ret_val) return ret_val;
++
++ switch (BCM5481_ASTAT_HCD(phy_data)) {
++ case BCM5481_ASTAT_100BTXFD:
++ case BCM5481_ASTAT_100BTXHD:
++ *is100 = 1;
++ break;
++ default:
++ *is100 = 0;
++ }
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ ret_val = iegbe_oem_read_phy_reg_ex(hw,
+@@ -1535,6 +1717,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
+ * see iegbe_phy_m88_get_info
+ */
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ case BCM5481_PHY_ID:
++ DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ /* The downshift status is checked only once, after link is
+@@ -1636,8 +1823,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
+ * the M88 used in truxton.
+ */
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
++ case BCM5481_PHY_ID:
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
+ if(ret_val) {
+ DEBUGOUT("Unable to read register PHY_CTRL\n");
+@@ -1699,6 +1891,8 @@ iegbe_oem_phy_init_script(struct iegbe_h
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
++ case BCM5481_PHY_ID:
++ case BCM5395S_PHY_ID:
+ DEBUGOUT("Nothing to do for OEM PHY Init");
+ break;
+ default:
+@@ -1735,6 +1929,11 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
+ return -1;
+ }
+
++ if (hw->phy_id == BCM5395S_PHY_ID) {
++ DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
++ return -1;
++ }
++
+ /* call the GCU func that will read the phy
+ *
+ * Make note that the M88 phy is what'll be used on Truxton.
+@@ -1782,6 +1981,11 @@ iegbe_oem_set_trans_gasket(struct iegbe_
+ }
+
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ case BCM5481_PHY_ID:
++ DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ /* Gasket set correctly for Marvell Phys, so nothing to do */
+@@ -1886,6 +2090,8 @@ iegbe_oem_phy_needs_reset_with_mac(struc
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
++ case BCM5481_PHY_ID:
++ case BCM5395S_PHY_ID:
+ ret_val = FALSE;
+ break;
+ default:
+@@ -1935,6 +2141,8 @@ iegbe_oem_config_dsp_after_link_change(s
+ switch (hw->phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
++ case BCM5481_PHY_ID:
++ case BCM5395S_PHY_ID:
+ DEBUGOUT("No DSP to configure on OEM PHY");
+ break;
+ default:
+@@ -1978,6 +2186,12 @@ iegbe_oem_get_cable_length(struct iegbe_
+ }
+
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ case BCM5481_PHY_ID:
++ *min_length = 0;
++ *max_length = iegbe_igp_cable_length_150;
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ ret_val = iegbe_oem_read_phy_reg_ex(hw,
+@@ -2061,6 +2275,23 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
+ */
+
+ switch (hw->phy_id) {
++ case BCM5395S_PHY_ID:
++ /* Link always up */
++ *isUp = TRUE;
++ return E1000_SUCCESS;
++ break;
++
++ case BCM5481_PHY_ID:
++ iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
++ ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
++ if(ret_val)
++ {
++ DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
++ return ret_val;
++ }
++ statusMask = BCM5481_ESTAT_LINK;
++ break;
++
+ case M88E1000_I_PHY_ID:
+ case M88E1141_E_PHY_ID:
+ iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+@@ -2092,3 +2323,210 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
+ #endif /* ifdef EXTERNAL_MDIO */
+ }
+
++
++
++//-----
++// Read BCM5481 expansion register
++//
++int32_t
++bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
++{
++ int ret;
++ uint16_t selector;
++ uint16_t reg_data;
++
++ // Get the current value of bits 15:12
++ ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
++ if (ret)
++ return ret;
++
++ // Select the expansion register
++ selector &= 0xf000;
++ selector |= (0xf << 8) | (reg);
++ iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
++
++ // Read the expansion register
++ ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &reg_data);
++
++ // De-select the expansion registers.
++ selector &= 0xf000;
++ iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
++
++ if (ret)
++ return ret;
++
++ *data = reg_data;
++ return ret;
++}
++
++//-----
++// Read reg 0x18 sub-register
++//
++static int32_t
++bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
++{
++ int ret;
++ uint16_t tmp_data;
++
++ // Select reg 0x18, sv
++ tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
++ if(ret)
++ return ret;
++
++ // Read reg 0x18, sv
++ ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
++ if(ret)
++ return ret;
++
++ *data = tmp_data;
++ return ret;
++}
++
++//-----
++// Read reg 0x1C sub-register
++//
++int32_t
++bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
++{
++ int ret;
++ uint16_t tmp_data;
++
++ // Select reg 0x1c, sv
++ tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
++
++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
++ if(ret)
++ return ret;
++
++ // Read reg 0x1c, sv
++ ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
++ if(ret)
++ return ret;
++
++ *data = tmp_data;
++ return ret;
++}
++
++//-----
++// Read-modify-write a 0x1C register.
++//
++// hw - hardware access info.
++// reg - 0x1C register to modify.
++// data - bits which should be set.
++// mask - the '1' bits in this argument will be cleared in the data
++// read from 'reg' then 'data' will be or'd in and the result
++// will be written to 'reg'.
++
++int32_t
++bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
++{
++ int32_t ret;
++ uint16_t reg_data;
++
++ ret = 0;
++
++ ret = bcm5481_read_1csv (hw, reg, &reg_data);
++ if (ret)
++ {
++ DEBUGOUT("Unable to read BCM5481 1CH register\n");
++ printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
++ return ret;
++ }
++
++ reg_data &= ~mask;
++ reg_data |= (BCM5481_R1CH_WE | data);
++
++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
++ if(ret)
++ {
++ DEBUGOUT("Unable to write BCM5481 1CH register\n");
++ printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
++ return ret;
++ }
++
++ return ret;
++}
++
++int32_t
++oi_phy_setup (struct iegbe_hw *hw)
++{
++ int ret;
++ uint16_t pmii_data;
++ uint16_t mctrl_data;
++ uint16_t cacr_data;
++
++ ret = 0;
++
++ // Set low power mode via reg 0x18, sv010, bit 6
++ // Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
++ ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
++ if (ret)
++ {
++ DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
++ printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
++ return ret;
++ }
++
++ // Set the LPM bit in the data just read and write back to sv010
++ // The shadow register select bits [2:0] are set by reading the sv010
++ // register.
++ pmii_data |= BCM5481_R18H_SV010_LPM;
++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
++ if(ret)
++ {
++ DEBUGOUT("Unable to write BCM5481_R18H register\n");
++ printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
++ return ret;
++ }
++
++
++ // Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
++
++ if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
++ {
++ DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
++ printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
++ return ret;
++ }
++ mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
++
++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
++ if(ret)
++ {
++ DEBUGOUT("Unable to write BCM5481_R18H register\n");
++ printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
++ return ret;
++ }
++
++ // Enable RGMII transmit clock delay in reg 0x1c, sv00011
++ ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
++ if (ret)
++ {
++ DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
++ printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
++ return ret;
++ }
++
++ cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
++
++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
++ if(ret)
++ {
++ DEBUGOUT("Unable to write BCM5481_R1CH register\n");
++ printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
++ return ret;
++ }
++
++ // Enable dual link speed indication (0x1c, sv 00010, bit 2)
++ ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
++ if (ret)
++ return ret;
++
++ // Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
++ ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
++ if (ret)
++ return ret;
++
++ return ret;
++}
+--- a/Embedded/src/GbE/iegbe_oem_phy.h
++++ b/Embedded/src/GbE/iegbe_oem_phy.h
+@@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct
+
+ #define DEFAULT_ICP_XXXX_TIPG_IPGT 8 /* Inter Packet Gap Transmit Time */
+ #define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
++#define BCM5481_PHY_ID 0x0143BCA0
++#define BCM5395S_PHY_ID 0x0143BCF0
+
+ /* Miscellaneous defines */
+ #ifdef IEGBE_10_100_ONLY
+@@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct
+ #define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x2F
+ #endif
+
++/* BCM5481 specifics */
++
++#define BCM5481_ECTRL (0x10)
++#define BCM5481_ESTAT (0x11)
++#define BCM5481_RXERR (0x12)
++#define BCM5481_EXPRW (0x15)
++#define BCM5481_EXPACC (0x17)
++#define BCM5481_ASTAT (0x19)
++#define BCM5481_R18H (0x18)
++#define BCM5481_R1CH (0x1c)
++
++/* indirect register access via register 18h */
++
++#define BCM5481_R18H_SV_MASK (7) // Mask for SV bits.
++#define BCM5481_R18H_SV_ACTRL (0) // SV000 Aux. control
++#define BCM5481_R18H_SV_10BT (1) // SV001 10Base-T
++#define BCM5481_R18H_SV_PMII (2) // SV010 Power/MII control
++#define BCM5481_R18H_SV_MTEST (4) // SV100 Misc. test
++#define BCM5481_R18H_SV_MCTRL (7) // SV111 Misc. control
++
++#define BCM5481_R18H_SV001_POL (1 << 13) // Polarity
++#define BCM5481_R18H_SV010_LPM (1 << 6)
++#define BCM5481_R18H_SV111_SKEW (1 << 8)
++#define BCM5481_R18H_WE (1 << 15) // Write enable
++
++// 0x1c registers
++#define BCM5481_R1CH_SV_SHIFT (10)
++#define BCM5481_R1CH_SV_MASK (0x1f)
++#define BCM5481_R1CH_SC1 (0x02) // sv00010 Spare control 1
++#define BCM5481_R1CH_CACR (0x03) // sv00011 Clock alignment control
++#define BCM5481_R1CH_LCTRL (0x09) // sv01001 LED control
++#define BCM5481_R1CH_LEDS1 (0x0d) // sv01101 LED selector 1
++
++// 0x1c common
++#define BCM5481_R1CH_WE (1 << 15) // Write enable
++
++// 0x1c, sv 00010
++#define BCM5481_R1CH_SC1_LINK (1 << 2) // sv00010 Linkspeed
++
++// 0x1c, sv 00011
++#define BCM5481_R1CH_CACR_TCD (1 << 9) // sv00011 RGMII tx clock delay
++
++// 0x1c, sv 01001
++#define BCM5481_R1CH_LCTRL_ALEN (1 << 4) // Activity/Link enable on ACTIVITY LED
++#define BCM5481_R1CH_LCTRL_AEN (1 << 3) // Activity enable on ACTIVITY LED
++
++#define BCM5481_ECTRL_DISMDIX (1 <<14)
++
++#define BCM5481_MCTRL_AUTOMDIX (1 <<9)
++
++#define BCM5481_ESTAT_LINK (1 << 8)
++
++#define BCM5481_ASTAT_ANC (1 << 15)
++#define BCM5481_ASTAT_ANHCD (7 << 8)
++#define BCM5481_ASTAT_HCD(x) ((x >> 8) & 7)
++#define BCM5481_ASTAT_1KBTFD (0x7)
++#define BCM5481_ASTAT_1KBTHD (0x6)
++#define BCM5481_ASTAT_100BTXFD (0x5)
++#define BCM5481_ASTAT_100BTXHD (0x3)
++
+ #endif /* ifndef _IEGBE_OEM_PHY_H_ */
+
diff --git a/package/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch b/package/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch
new file mode 100644
index 0000000000..2919466251
--- /dev/null
+++ b/package/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch
@@ -0,0 +1,11 @@
+--- a/Embedded/src/CAN/icp_can_user.h
++++ b/Embedded/src/CAN/icp_can_user.h
+@@ -63,6 +63,8 @@
+ #ifndef __ICP_CAN_USER_H__
+ #define __ICP_CAN_USER_H__
+
++#include <linux/ioctl.h>
++
+ /*****************************************************************************
+ * Device IO control codes.
+ *****************************************************************************/
diff --git a/package/ep80579-drivers/patches/210-can_include_linux_fs_h.patch b/package/ep80579-drivers/patches/210-can_include_linux_fs_h.patch
new file mode 100644
index 0000000000..26c53dcea4
--- /dev/null
+++ b/package/ep80579-drivers/patches/210-can_include_linux_fs_h.patch
@@ -0,0 +1,11 @@
+--- a/Embedded/src/CAN/can_main.c
++++ b/Embedded/src/CAN/can_main.c
+@@ -70,6 +70,8 @@
+
+ #include "can_main.h"
+ #include "can_ioctl.h"
++#include <linux/fs.h>
++
+
+ MODULE_AUTHOR("Intel(R) Corporation");
+ MODULE_DESCRIPTION("Controller Area Network Driver");
diff --git a/package/ep80579-drivers/patches/220-can_fix_irq_request.patch b/package/ep80579-drivers/patches/220-can_fix_irq_request.patch
new file mode 100644
index 0000000000..2950cc79e5
--- /dev/null
+++ b/package/ep80579-drivers/patches/220-can_fix_irq_request.patch
@@ -0,0 +1,23 @@
+--- a/Embedded/src/CAN/can_main.c
++++ b/Embedded/src/CAN/can_main.c
+@@ -654,7 +654,7 @@ int can_dev_io(struct inode *inode, stru
+ /*****************************************************************************
+ * Interrupt handler.
+ *****************************************************************************/
+-irqreturn_t can_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
++irqreturn_t can_irq_handler(int irq, void *dev_id)
+ {
+ can_os_t *can_os = (can_os_t *) dev_id;
+ unsigned int int_status;
+--- a/Embedded/src/CAN/can_main.h
++++ b/Embedded/src/CAN/can_main.h
+@@ -165,8 +165,7 @@ int can_dev_io(
+
+ irqreturn_t can_irq_handler(
+ int irq,
+- void *dev_id,
+- struct pt_regs *regs);
++ void *dev_id);
+
+ void can_tasklet(
+ unsigned long arg
diff --git a/package/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch b/package/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch
new file mode 100644
index 0000000000..57e9c8fc05
--- /dev/null
+++ b/package/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch
@@ -0,0 +1,41 @@
+diff -Nur a/Embedded/src/CAN/can_main.c b/Embedded/src/CAN/can_main.c
+--- a/Embedded/src/CAN/can_main.c 2009-11-30 10:44:39.044269751 +0100
++++ b/Embedded/src/CAN/can_main.c 2009-11-30 10:54:41.434355642 +0100
+@@ -213,8 +213,8 @@
+ spin_lock_init(&(g_can_os[can_num].int_spinlock));
+ spin_lock_init(&(g_can_os[can_num].open_spinlock));
+
+- dev->dev.driver_data = (void *) &(g_can_os[can_num]);
+- if (!dev->dev.driver_data)
++ dev_set_drvdata(&dev->dev, (void *) &(g_can_os[can_num]));
++ if (!dev_get_drvdata(&dev->dev))
+ {
+ printk("Couldn't create CAN device %d. Exiting.\n",
+ dev->device);
+@@ -236,7 +236,7 @@
+ *****************************************************************************/
+ void can_pci_remove(struct pci_dev *dev)
+ {
+- can_os_t *can_os = dev->dev.driver_data;
++ can_os_t *can_os = dev_get_drvdata(&dev->dev);
+
+ iounmap(can_os->pci_remap);
+ icp_can_destroy(can_os->can);
+@@ -250,7 +250,7 @@
+ {
+ unsigned int i;
+ unsigned int int_status;
+- can_os_t *can_os = dev->dev.driver_data;
++ can_os_t *can_os = dev_get_drvdata(&dev->dev);
+ int err;
+
+ /* Indicate that we are suspending */
+@@ -321,7 +321,7 @@
+ int can_pci_resume(struct pci_dev *dev)
+ {
+ unsigned int i;
+- can_os_t *can_os = dev->dev.driver_data;
++ can_os_t *can_os = dev_get_drvdata(&dev->dev);
+
+ /* Restore PCI CFG space */
+ pci_restore_state(dev);
diff --git a/package/ep80579-drivers/patches/300-wdt_compile_fix.patch b/package/ep80579-drivers/patches/300-wdt_compile_fix.patch
new file mode 100644
index 0000000000..59242b80b3
--- /dev/null
+++ b/package/ep80579-drivers/patches/300-wdt_compile_fix.patch
@@ -0,0 +1,59 @@
+--- a/Embedded/src/WDT/iwdt.c
++++ b/Embedded/src/WDT/iwdt.c
+@@ -180,19 +180,19 @@ MODULE_PARM_DESC(wdt_scale, "Intel WDT s
+ module_param(wdt_intr_type, byte, WDT_INT_TYPE_IRQ);
+ MODULE_PARM_DESC(wdt_intr_type, "Intel WDT interrupt type (default SERIRQ).");
+
+-module_param(wdt_margin1, uint, TIMER_MARGIN);
++module_param(wdt_margin1, uint, 0);
+ MODULE_PARM_DESC(wdt_margin1, "First stage Intel WDT timeout in steps of 1 ms by default.");
+
+-module_param(wdt_margin2, uint, TIMER_MARGIN);
++module_param(wdt_margin2, uint, 0);
+ MODULE_PARM_DESC(wdt_margin2, "Second stage Intel WDT timeout in steps of 1 ms by default.");
+
+ module_param(nowayout, int, 0);
+ MODULE_PARM_DESC(nowayout, "Intel WDT can't be stopped once started (default=0)");
+
+-module_param(wdt_index_port, int, 0x4E);
++module_param(wdt_index_port, int, 0);
+ MODULE_PARM_DESC(wdt_index_port, "WDT Index Port (default 0x4e)");
+
+-module_param(wdt_data_port, int, 0x4E);
++module_param(wdt_data_port, int, 0);
+ MODULE_PARM_DESC(wdt_data_port, "WDT Data Port (default 0x4f)");
+
+ static int wdt_get_iobase(struct pci_dev *dev, u16 *iobase, int *irq);
+@@ -218,7 +218,7 @@ static ssize_t wdt_write(struct file *fi
+ size_t count, loff_t * pos);
+ static int wdt_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+-static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs);
++static irqreturn_t wdt_isr(int irq, void *dev_id);
+ static void __exit wdt_cleanup(void);
+ static int __init wdt_init(void);
+ static int __init wdt_init_one(struct pci_dev *dev,
+@@ -255,7 +255,7 @@ static struct pci_driver wdt_driver = {
+ name: "iwdt",
+ id_table: lpc_pci_tbl,
+ probe: wdt_init_one,
+- remove: __devexit(wdt_remove_one),
++ remove: __devexit_p(wdt_remove_one),
+ suspend: wdt_pci_suspend,
+ resume: wdt_pci_resume,
+ };
+@@ -1393,12 +1393,12 @@ static int wdt_ioctl(struct inode *inode
+
+ /*
+ * Function Name: wdt_isr()
+- * Parameter: int irq - irq number, void *dev_id, struct pt_regs *regs
++ * Parameter: int irq - irq number, void *dev_id
+ * Return Value:: IRQ_NONE - if the interrupt is not for wdt.
+ * IRQ_HANDLED - if it is for wdt.
+ * Description: This is the interrupt service routine of the WDT.
+ */
+-static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs)
++static irqreturn_t wdt_isr(int irq, void *dev_id)
+ {
+ u8 val;
+
diff --git a/package/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch b/package/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch
new file mode 100644
index 0000000000..d858aff1ff
--- /dev/null
+++ b/package/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch
@@ -0,0 +1,22 @@
+--- a/Embedded/src/EDMA/dma_linux.c
++++ b/Embedded/src/EDMA/dma_linux.c
+@@ -149,8 +149,7 @@ int32_t edma_suspend (struct pci_dev *de
+ int32_t edma_resume(struct pci_dev *dev);
+ int32_t initialize_edma_device(struct edma_device *device);
+
+-static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
+- struct pt_regs * regs);
++static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id);
+
+ /* Prototypes - Misc. */
+
+@@ -429,8 +428,7 @@ int32_t edma_release(struct inode * inod
+ * Return Values: HANDLED = 1, NOT_HANDLED = 0
+ *****************************************************************************/
+
+-static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
+- struct pt_regs * regs)
++static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id)
+ {
+
+ uint32_t clear_bits;
diff --git a/package/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch b/package/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch
new file mode 100644
index 0000000000..f3f9acb1e0
--- /dev/null
+++ b/package/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch
@@ -0,0 +1,22 @@
+--- a/Embedded/src/1588/1588.c
++++ b/Embedded/src/1588/1588.c
+@@ -631,7 +631,7 @@ int restore_interrupts(void)
+ IRQ_NONE => this device did not interrupt
+
+ ******************************************************************************/
+-irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs)
++irqreturn_t timesync_isr(int irq, void *dev_id)
+ {
+ if ( !ixTimeSyncAccEventAmmsFlagGet() && !ixTimeSyncAccEventAsmsFlagGet()&&
+ !ixTimeSyncAccEventAtmFlagGet() && !ixTimeSyncAccEventPpsmFlagGet()&&
+--- a/Embedded/src/1588/1588.h
++++ b/Embedded/src/1588/1588.h
+@@ -128,7 +128,7 @@ int pci_suspend(struct pci_dev *dev, pm_
+ int pci_resume(struct pci_dev *dev);
+ int pci_probe(struct pci_dev *dev, const struct pci_device_id *id);
+ void pci_remove(struct pci_dev *dev);
+-irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs);
++irqreturn_t timesync_isr(int irq, void *dev_id);
+
+ // private functions
+ int save_reg_state(void);
diff --git a/package/ep80579-drivers/patches/600-2.6.27_includes.patch b/package/ep80579-drivers/patches/600-2.6.27_includes.patch
new file mode 100644
index 0000000000..c11275ece6
--- /dev/null
+++ b/package/ep80579-drivers/patches/600-2.6.27_includes.patch
@@ -0,0 +1,22 @@
+--- a/Embedded/src/CAN/can_main.h
++++ b/Embedded/src/CAN/can_main.h
+@@ -65,7 +65,7 @@
+
+ #include <linux/interrupt.h>
+ #include <linux/pci.h>
+-#include <asm/semaphore.h>
++#include <linux/semaphore.h>
+ #include <linux/spinlock.h>
+ #include <linux/cdev.h>
+ #include <asm/uaccess.h>
+--- a/Embedded/src/EDMA/dma_linux.c
++++ b/Embedded/src/EDMA/dma_linux.c
+@@ -87,7 +87,7 @@
+ #include <linux/fcntl.h> /* O_ACCMODE */
+ #include <asm/system.h> /* cli, *_flags */
+ #include <asm/uaccess.h> /* copy_to_user */
+-#include <asm/semaphore.h>
++#include <linux/semaphore.h>
+ #include <asm/io.h> /* inb(), outb() */
+ #include <linux/kmod.h>
+ #include <linux/ioport.h> /* request_region */
diff --git a/package/ep80579-drivers/patches/601-2.6.32_includes.patch b/package/ep80579-drivers/patches/601-2.6.32_includes.patch
new file mode 100644
index 0000000000..680bbf11ba
--- /dev/null
+++ b/package/ep80579-drivers/patches/601-2.6.32_includes.patch
@@ -0,0 +1,33 @@
+diff -Nur a/Embedded/src/1588/1588.c b/Embedded/src/1588/1588.c
+--- a/Embedded/src/1588/1588.c 2009-11-10 14:20:46.563322192 +0100
++++ b/Embedded/src/1588/1588.c 2009-11-30 10:44:22.144270452 +0100
+@@ -72,6 +72,7 @@
+ *
+ ****************************************************************************/
+
++#include <linux/sched.h>
+ #include "1588.h"
+
+ MODULE_AUTHOR("Intel(R) Corporation");
+diff -Nur a/Embedded/src/CAN/can_main.c b/Embedded/src/CAN/can_main.c
+--- a/Embedded/src/CAN/can_main.c 2009-11-10 14:20:46.563322192 +0100
++++ b/Embedded/src/CAN/can_main.c 2009-11-30 10:44:39.044269751 +0100
+@@ -68,6 +68,7 @@
+ *
+ **************************************************************************/
+
++#include <linux/sched.h>
+ #include "can_main.h"
+ #include "can_ioctl.h"
+
+diff -Nur a/Embedded/src/WDT/iwdt.c b/Embedded/src/WDT/iwdt.c
+--- a/Embedded/src/WDT/iwdt.c 2009-11-10 14:20:46.563322192 +0100
++++ b/Embedded/src/WDT/iwdt.c 2009-11-30 10:44:54.024262744 +0100
+@@ -137,6 +137,7 @@
+ #include <linux/watchdog.h>
+ #include <linux/miscdevice.h>
+ #include <linux/interrupt.h>
++#include <linux/sched.h>
+ #include "iwdt.h"
+
+ MODULE_AUTHOR("Intel(R) Corporation");
diff --git a/package/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch b/package/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch
new file mode 100644
index 0000000000..ca8c1bb9ea
--- /dev/null
+++ b/package/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch
@@ -0,0 +1,31 @@
+--- a/Embedded/src/GbE/kcompat.h
++++ b/Embedded/src/GbE/kcompat.h
+@@ -46,12 +46,6 @@ GPL LICENSE SUMMARY
+ #include <linux/sched.h>
+ #include <asm/io.h>
+
+-#ifndef IRQ_HANDLED
+-#define irqreturn_t void
+-#define IRQ_HANDLED
+-#define IRQ_NONE
+-#endif
+-
+ #ifndef SET_NETDEV_DEV
+ #define SET_NETDEV_DEV(net, pdev)
+ #endif
+@@ -748,6 +742,15 @@ extern void dump_stack(void);
+
+ #endif /* 2.4.24 */
+
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) )
++#ifndef IRQ_HANDLED
++#define irqreturn_t void
++#define IRQ_HANDLED
++#define IRQ_NONE
++#endif
++#endif /* < 2.6.30 */
++
+ #endif /* _KCOMPAT_H_ */
+
+
diff --git a/package/ep80579-drivers/patches/701-iegbe_poll_dev.patch b/package/ep80579-drivers/patches/701-iegbe_poll_dev.patch
new file mode 100644
index 0000000000..63a1326853
--- /dev/null
+++ b/package/ep80579-drivers/patches/701-iegbe_poll_dev.patch
@@ -0,0 +1,11 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -3534,7 +3534,7 @@ static int iegbe_clean(struct napi_struc
+ int tx_cleaned = 0, work_done = 0;
+
+ /* Must NOT use netdev_priv macro here. */
+- adapter = poll_dev->priv;
++ adapter = netdev_priv(poll_dev);
+
+ /* iegbe_clean is called per-cpu. This lock protects
+ * tx_ring[0] from being cleaned by multiple cpus
diff --git a/target/linux/generic-2.6/config-2.6.32 b/target/linux/generic-2.6/config-2.6.32
index a9c4bfb824..b869c9ae97 100644
--- a/target/linux/generic-2.6/config-2.6.32
+++ b/target/linux/generic-2.6/config-2.6.32
@@ -550,6 +550,7 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_EXT4_DEBUG is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_EXT4_FS is not set
+# CONFIG_EXT4_FS_XATTR is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_EXTRA_TARGETS=""
# CONFIG_EZX_PCAP is not set
diff --git a/target/linux/x86/Makefile b/target/linux/x86/Makefile
index cd7c1b5c01..4cf011af78 100644
--- a/target/linux/x86/Makefile
+++ b/target/linux/x86/Makefile
@@ -10,7 +10,7 @@ ARCH:=i386
BOARD:=x86
BOARDNAME:=x86
FEATURES:=squashfs jffs2 ext2 vdi vmdk pcmcia tgz
-SUBTARGETS=generic olpc xen_domu
+SUBTARGETS=generic olpc xen_domu ep80579
LINUX_VERSION:=2.6.32.10
diff --git a/target/linux/x86/ep80579/config-default b/target/linux/x86/ep80579/config-default
new file mode 100644
index 0000000000..2a89b4fe6f
--- /dev/null
+++ b/target/linux/x86/ep80579/config-default
@@ -0,0 +1,12 @@
+CONFIG_ATA=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_HIGHMEM4G=y
+# CONFIG_HIGHPTE is not set
+# CONFIG_MTD is not set
+# CONFIG_NOHIGHMEM is not set
+CONFIG_SATA_AHCI=y
+# CONFIG_SQUASHFS is not set
+CONFIG_ITCO_WDT=y
+# CONFIG_ITCO_VENDOR_SUPPORT is not set
+CONFIG_LOG_BUF_SHIFT=17
diff --git a/target/linux/x86/ep80579/target.mk b/target/linux/x86/ep80579/target.mk
new file mode 100644
index 0000000000..00fe1abc3d
--- /dev/null
+++ b/target/linux/x86/ep80579/target.mk
@@ -0,0 +1,9 @@
+BOARDNAME:=Intel EP80579
+DEFAULT_PACKAGES += kmod-ep80579-can kmod-ep80579-eth kmod-ep80579-misc \
+ kmod-usb-core kmod-usb2 kmod-usb-hid kmod-usb-uhci
+
+define Target/Description
+ Build firmware images for Intel EP80579 based boards
+ (e.g : ADI Engineering Ocracoke Island)
+endef
+