diff options
| author | cshore <cshore@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-11-28 22:04:44 +0000 |
|---|---|---|
| committer | cshore <cshore@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-11-28 22:04:44 +0000 |
| commit | f7a2edf410595e53cf4ca5d742c98f835e9435bf (patch) | |
| tree | 48bfbe14ba44edbb0300413128f66b4941f0fd80 | |
| parent | 9dd6c43103f12ece08732fbc4661efc4b17b4d18 (diff) | |
bcm63xx: Add support for the T-Com Speedport W 500V.
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
4 files changed, 95 insertions, 1 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/defconfig/SP500W/network b/target/linux/brcm63xx/base-files/etc/defconfig/SP500W/network new file mode 100644 index 0000000000..a35fd2ef9a --- /dev/null +++ b/target/linux/brcm63xx/base-files/etc/defconfig/SP500W/network @@ -0,0 +1,14 @@ +# Copyright (C) 2006 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh index bacd6665fc..a9ac79b617 100755 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh @@ -25,7 +25,7 @@ brcm63xx_detect() { brcm63xx_has_reset_button="true" ifname=eth1 ;; - "bcm63xx/96358GW "*) + "bcm63xx/96358GW "* | "bcm63xx/SPW500V "*) status_led="power:green" brcm63xx_has_reset_button="true" ifname=eth0 diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile index 589e47c561..2671536e84 100644 --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -189,6 +189,8 @@ define Image/Build # Telsey CPVA642-type (e.g. CPA-ZNTE60T) $(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0") + # T-Com Speedport W 500V + $(call Image/Build/CFEFIXUP,$(1),96348GW,6348,SPW500V) endef $(eval $(call BuildImage)) diff --git a/target/linux/brcm63xx/patches-2.6.35/420-board_spw500v.patch b/target/linux/brcm63xx/patches-2.6.35/420-board_spw500v.patch new file mode 100644 index 0000000000..9724aa6507 --- /dev/null +++ b/target/linux/brcm63xx/patches-2.6.35/420-board_spw500v.patch @@ -0,0 +1,78 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -575,6 +575,67 @@ static struct board_info __initdata boar + + }; + ++static struct board_info __initdata board_spw500v = { ++ .name = "SPW500V", ++ .expected_cpu_id = 0x6348, ++ ++ .has_uart0 = 1, ++ .has_enet0 = 1, ++ .has_pci = 1, ++ ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_dsp = 1, ++ .dsp = { ++ .gpio_rst = 6, ++ .gpio_int = 34, ++ .ext_irq = 2, ++ .cs = 2, ++ }, ++ ++ .leds = { ++ { ++ .name = "power:red", ++ .gpio = 1, ++ .active_low = 1, ++ }, ++ { ++ .name = "power:green", ++ .gpio = 0, ++ .active_low = 1, ++ .default_trigger = "default-on", ++ }, ++ { ++ .name = "ppp", ++ .gpio = 3, ++ .active_low = 1, ++ }, ++ { .name = "pstn", ++ .gpio = 28, ++ .active_low = 1, ++ }, ++ { ++ .name = "voip", ++ .gpio = 32, ++ .active_low = 1, ++ }, ++ }, ++ ++ .buttons = { ++ { ++ .desc = "reset", ++ .gpio = 33, ++ .active_low = 1, ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .threshold = 3, ++ }, ++ }, ++}; ++ + #endif + + /* +@@ -1409,6 +1470,7 @@ static const struct board_info __initdat + &board_96348gw_a, + &board_rta1025w_16, + &board_96348_D4PW, ++ &board_spw500v, + #endif + + #ifdef CONFIG_BCM63XX_CPU_6358 |