brcm47xx: add initial support for devices with bcma bus.

Ethernet and wifi are not working and this is highly experimental. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27301 3c298f89-4303-0410-b956-a3cf2f4a3e73
author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> 2011-06-28 22:21:57 +0000
committer: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> 2011-06-28 22:21:57 +0000
commit: 6c4398bc6add362d5b399ba361720cf1afd7176b (patch)
tree: d7387ce02884e192e6b4e330ce901b1a519f7f70
parent: a89d3f1a9b4415a29eb23a7831b2d012f316889c (diff)
25 files changed, 3366 insertions, 189 deletions
diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 00a72e9076..8e7ffa6cc7 100644
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -149,9 +149,9 @@ static void __init bcm4780_init(void) {
 
 		/* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
 		printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
-		gpio_outen(pin, pin);
-		gpio_control(pin, 0);
-		gpio_out(pin, pin);
+		ssb_gpio_outen(&ssb_bcm47xx, pin, pin);
+		ssb_gpio_control(&ssb_bcm47xx, pin, 0);
+		ssb_gpio_out(&ssb_bcm47xx, pin, pin);
 
 		/* Wait 5s, so the HDD can spin up */
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -161,14 +161,14 @@ static void __init bcm4780_init(void) {
 static void __init NetCenter_init(void) {
 		/* unset pin 6 (+12V) */
 		int pin = 1 << 6;
-		gpio_outen(pin, pin);
-		gpio_control(pin, 0);
-		gpio_out(pin, pin);
+		ssb_gpio_outen(&ssb_bcm47xx, pin, pin);
+		ssb_gpio_control(&ssb_bcm47xx, pin, 0);
+		ssb_gpio_out(&ssb_bcm47xx, pin, pin);
 		/* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
 		pin = 1 << 1;
-		gpio_outen(pin, pin);
-		gpio_control(pin, 0);
-		gpio_out(pin, pin);
+		ssb_gpio_outen(&ssb_bcm47xx, pin, pin);
+		ssb_gpio_control(&ssb_bcm47xx, pin, 0);
+		ssb_gpio_out(&ssb_bcm47xx, pin, pin);
 		/* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
 		bcm4780_init();
 }
@@ -177,9 +177,9 @@ static void __init bcm57xx_init(void) {
 	int pin = 1 << 2;
 
 	/* FIXME: switch comes up, but port mappings/vlans not right */
-	gpio_outen(pin, pin);
-	gpio_control(pin, 0);
-	gpio_out(pin, pin);
+	ssb_gpio_outen(&ssb_bcm47xx, pin, pin);
+	ssb_gpio_control(&ssb_bcm47xx, pin, 0);
+	ssb_gpio_out(&ssb_bcm47xx, pin, pin);
 }
 
 static struct platform_t __initdata platforms[] = {
@@ -1166,18 +1166,18 @@ static void register_buttons(struct button_t *b)
 
 	platform.button_mask &= ~gpiomask;
 
-	gpio_outen(platform.button_mask, 0);
-	gpio_control(platform.button_mask, 0);
-	platform.button_polarity = gpio_in() & platform.button_mask;
-	gpio_intpolarity(platform.button_mask, platform.button_polarity);
-	gpio_setintmask(platform.button_mask, platform.button_mask);
+	ssb_gpio_outen(&ssb_bcm47xx, platform.button_mask, 0);
+	ssb_gpio_control(&ssb_bcm47xx, platform.button_mask, 0);
+	platform.button_polarity = ssb_gpio_in(&ssb_bcm47xx, ~0) & platform.button_mask;
+	ssb_gpio_polarity(&ssb_bcm47xx, platform.button_mask, platform.button_polarity);
+	ssb_gpio_intmask(&ssb_bcm47xx, platform.button_mask, platform.button_mask);
 
 	gpio_set_irqenable(1, button_handler);
 }
 
 static void unregister_buttons(struct button_t *b)
 {
-	gpio_setintmask(platform.button_mask, 0);
+	ssb_gpio_intmask(&ssb_bcm47xx, platform.button_mask, 0);
 
 	gpio_set_irqenable(0, button_handler);
 }
@@ -1237,12 +1237,12 @@ static irqreturn_t button_handler(int irq, void *dev_id)
 	struct button_t *b;
 	u32 in, changed;
 
-	in = gpio_in() & platform.button_mask;
-	gpio_intpolarity(platform.button_mask, in);
+	in = ssb_gpio_in(&ssb_bcm47xx, ~0) & platform.button_mask;
+	ssb_gpio_polarity(&ssb_bcm47xx, platform.button_mask, in);
 	changed = platform.button_polarity ^ in;
 	platform.button_polarity = in;
 
-	changed &= ~gpio_outen(0, 0);
+	changed &= ~ssb_gpio_outen(&ssb_bcm47xx, 0, 0);
 
 	for (b = platform.buttons; b->name; b++) {
 		struct event_t *event;
@@ -1298,10 +1298,10 @@ static void register_leds(struct led_t *l)
 		}
 	}
 
-	gpio_outen(mask, oe_mask);
-	gpio_control(mask, 0);
-	gpio_out(mask, val);
-	gpio_setintmask(mask, 0);
+	ssb_gpio_outen(&ssb_bcm47xx, mask, oe_mask);
+	ssb_gpio_control(&ssb_bcm47xx, mask, 0);
+	ssb_gpio_out(&ssb_bcm47xx, mask, val);
+	ssb_gpio_intmask(&ssb_bcm47xx, mask, 0);
 }
 
 static void unregister_leds(struct led_t *l)
@@ -1336,11 +1336,11 @@ static void led_flash(unsigned long dummy) {
 
 	mask &= ~gpiomask;
 	if (mask) {
-		u32 val = ~gpio_in();
+		u32 val = ~ssb_gpio_in(&ssb_bcm47xx, ~0);
 
-		gpio_outen(mask, mask);
-		gpio_control(mask, 0);
-		gpio_out(mask, val);
+		ssb_gpio_outen(&ssb_bcm47xx, mask, mask);
+		ssb_gpio_control(&ssb_bcm47xx, mask, 0);
+		ssb_gpio_out(&ssb_bcm47xx, mask, val);
 	}
 	if (mask || extif_blink) {
 		mod_timer(&led_timer, jiffies + FLASH_TIME);
@@ -1367,7 +1367,7 @@ static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t
 					if (led->gpio & GPIO_TYPE_EXTIF) {
 						len = sprintf(page, "%d\n", led->state);
 					} else {
-						u32 in = (gpio_in() & led->gpio ? 1 : 0);
+						u32 in = (ssb_gpio_in(&ssb_bcm47xx, ~0) & led->gpio ? 1 : 0);
 						u8 p = (led->polarity == NORMAL ? 0 : 1);
 						len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
 					}
@@ -1431,9 +1431,9 @@ static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count,
 						led->state = p ^ ((page[0] == '1') ? 1 : 0);
 						set_led_extif(led);
 					} else {
-						gpio_outen(led->gpio, led->gpio);
-						gpio_control(led->gpio, 0);
-						gpio_out(led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));
+						ssb_gpio_outen(&ssb_bcm47xx, led->gpio, led->gpio);
+						ssb_gpio_control(&ssb_bcm47xx, led->gpio, 0);
+						ssb_gpio_out(&ssb_bcm47xx, led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));
 					}
 				}
 				break;
@@ -1464,6 +1464,13 @@ static int __init diag_init(void)
 	static struct proc_dir_entry *p;
 	static struct platform_t *detected;
 
+#ifdef CONFIG_BCM47XX_SSB
+	if (bcm47xx_active_bus_type != BCM47XX_BUS_TYPE_SSB) {
+		printk(MODULE_NAME ": bcma bus is not supported.\n");
+		return -ENODEV;
+	}
+#endif
+
 	detected = platform_detect();
 	if (!detected) {
 		printk(MODULE_NAME ": Router model not detected.\n");
diff --git a/package/broadcom-diag/src/gpio.h b/package/broadcom-diag/src/gpio.h
index cd48637b20..575fd8c471 100644
--- a/package/broadcom-diag/src/gpio.h
+++ b/package/broadcom-diag/src/gpio.h
@@ -1,46 +1,12 @@
 #ifndef __DIAG_GPIO_H
 #define __DIAG_GPIO_H
 #include <linux/interrupt.h>
-
-#ifndef BCMDRIVER
-#include <linux/ssb/ssb_embedded.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
 #include <linux/gpio.h>
-#define ssb ssb_bcm47xx
-#endif
-extern struct ssb_bus ssb;
+#include <asm/mach-bcm47xx/bcm47xx.h>
 
-
-static inline u32 gpio_in(void)
-{
-	return ssb_gpio_in(&ssb, ~0);
-}
-
-static inline u32 gpio_out(u32 mask, u32 value)
-{
-	return ssb_gpio_out(&ssb, mask, value);
-}
-
-static inline u32 gpio_outen(u32 mask, u32 value)
-{
-	return ssb_gpio_outen(&ssb, mask, value);
-}
-
-static inline u32 gpio_control(u32 mask, u32 value)
-{
-	return ssb_gpio_control(&ssb, mask, value);
-}
-
-static inline u32 gpio_setintmask(u32 mask, u32 value)
-{
-	return ssb_gpio_intmask(&ssb, mask, value);
-}
-
-static inline u32 gpio_intpolarity(u32 mask, u32 value)
-{
-	return ssb_gpio_polarity(&ssb, mask, value);
-}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,0)
+#define ssb_bcm47xx bcm47xx_bus.ssb
+#endif
 
 static inline u32 __ssb_write32_masked(struct ssb_device *dev, u16 offset,
 				       u32 mask, u32 value)
@@ -55,16 +21,8 @@ static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
 {
 	int irq;
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
 	irq = gpio_to_irq(0);
 	if (irq == -EINVAL) return;
-#else
-	if (ssb.chipco.dev)
-		irq = ssb_mips_irq(ssb.chipco.dev) + 2;
-	else if (ssb.extif.dev)
-		irq = ssb_mips_irq(ssb.extif.dev) + 2;
-	else return;
-#endif
 	
 	if (enabled) {
 		if (request_irq(irq, handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, "gpio", handler))
@@ -73,71 +31,10 @@ static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
 		free_irq(irq, handler);
 	}
 
-	if (ssb.chipco.dev)
-		__ssb_write32_masked(ssb.chipco.dev, SSB_CHIPCO_IRQMASK, SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
+	if (ssb_bcm47xx.chipco.dev)
+		__ssb_write32_masked(ssb_bcm47xx.chipco.dev, SSB_CHIPCO_IRQMASK, SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
 }
 
-#else
-
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmdevs.h>
-#include <sbutils.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-#include <sbmips.h>
-#else
-#include <hndcpu.h>
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-#define sbh bcm947xx_sbh
-#define sbh_lock bcm947xx_sbh_lock
-#endif
-
-extern void *sbh;
-extern spinlock_t sbh_lock;
-
-#define gpio_in()	sb_gpioin(sbh)
-#define gpio_out(mask, value) 	sb_gpioout(sbh, mask, ((value) & (mask)), GPIO_DRV_PRIORITY)
-#define gpio_outen(mask, value) 	sb_gpioouten(sbh, mask, value, GPIO_DRV_PRIORITY)
-#define gpio_control(mask, value) 	sb_gpiocontrol(sbh, mask, value, GPIO_DRV_PRIORITY)
-#define gpio_setintmask(mask, value) 	sb_gpiointmask(sbh, mask, value, GPIO_DRV_PRIORITY)
-#define gpio_intpolarity(mask, value) 	sb_gpiointpolarity(sbh, mask, value, GPIO_DRV_PRIORITY)
-
-static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *, struct pt_regs *))
-{
-	unsigned int coreidx;
-	unsigned long flags;
-	chipcregs_t *cc;
-	int irq;
-
-	spin_lock_irqsave(sbh_lock, flags);
-	coreidx = sb_coreidx(sbh);
-
-	irq = sb_irq(sbh) + 2;
-	if (enabled)
-		request_irq(irq, handler, SA_SHIRQ | SA_SAMPLE_RANDOM, "gpio", handler);
-	else
-		free_irq(irq, handler);
-
-	if ((cc = sb_setcore(sbh, SB_CC, 0))) {
-		int intmask;
-
-		intmask = readl(&cc->intmask);
-		if (enabled)
-			intmask |= CI_GPIO;
-		else
-			intmask &= ~CI_GPIO;
-		writel(intmask, &cc->intmask);
-	}
-	sb_setcoreidx(sbh, coreidx);
-	spin_unlock_irqrestore(sbh_lock, flags);
-}
-
-#endif /* BCMDRIVER */
-
 #define EXTIF_ADDR 0x1f000000
 #define EXTIF_UART (EXTIF_ADDR + 0x00800000)
 
diff --git a/target/linux/brcm47xx/config-3.0 b/target/linux/brcm47xx/config-3.0
index 2a3e743f13..4c2b62c6b7 100644
--- a/target/linux/brcm47xx/config-3.0
+++ b/target/linux/brcm47xx/config-3.0
@@ -14,7 +14,16 @@ CONFIG_B44_PCI=y
 CONFIG_B44_PCICORE_AUTOSELECT=y
 CONFIG_B44_PCI_AUTOSELECT=y
 CONFIG_BCM47XX=y
+CONFIG_BCM47XX_BCMA=y
+CONFIG_BCM47XX_SSB=y
 CONFIG_BCM47XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_MIPS=y
+CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_SOC=y
 CONFIG_BCMA_POSSIBLE=y
 # CONFIG_BRCMUTIL is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -31,6 +40,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
 CONFIG_CPU_MIPSR1=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
@@ -118,6 +128,7 @@ CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_SERIAL=y
 CONFIG_SSB_SPROM=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
diff --git a/target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch b/target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch
new file mode 100644
index 0000000000..e535617c75
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch
@@ -0,0 +1,274 @@
+From c4fb5adbe45b3a1cfc509a64bb92429ab0d6fc37 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 11 Jun 2011 16:47:38 +0200
+Subject: [PATCH 01/14] bcma: move parsing of EEPROM into own function.
+
+Move the parsing of the EEPROM data in scan function for one core into
+an own function. Now we are able to use it in some other scan function
+as well.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c |  230 ++++++++++++++++++++++++++-------------------------
+ 1 files changed, 118 insertions(+), 112 deletions(-)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -200,16 +200,124 @@ static s32 bcma_erom_get_addr_desc(struc
+ 	return addrl;
+ }
+ 
++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
++			      struct bcma_device *core)
++{
++	s32 tmp;
++	u8 i, j;
++	s32 cia, cib;
++	u8 ports[2], wrappers[2];
++
++	/* get CIs */
++	cia = bcma_erom_get_ci(bus, eromptr);
++	if (cia < 0) {
++		bcma_erom_push_ent(eromptr);
++		if (bcma_erom_is_end(bus, eromptr))
++			return -ESPIPE;
++		return -EILSEQ;
++	}
++	cib = bcma_erom_get_ci(bus, eromptr);
++	if (cib < 0)
++		return -EILSEQ;
++
++	/* parse CIs */
++	core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
++	core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
++	core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
++	ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
++	ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
++	wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
++	wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
++	core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
++
++	if (((core->id.manuf == BCMA_MANUF_ARM) &&
++	     (core->id.id == 0xFFF)) ||
++	    (ports[1] == 0)) {
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENXIO;
++	}
++
++	/* check if component is a core at all */
++	if (wrappers[0] + wrappers[1] == 0) {
++		/* we could save addrl of the router
++		if (cid == BCMA_CORE_OOB_ROUTER)
++		 */
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENXIO;
++	}
++
++	if (bcma_erom_is_bridge(bus, eromptr)) {
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENXIO;
++	}
++
++	/* get & parse master ports */
++	for (i = 0; i < ports[0]; i++) {
++		u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
++		if (mst_port_d < 0)
++			return -EILSEQ;
++	}
++
++	/* get & parse slave ports */
++	for (i = 0; i < ports[1]; i++) {
++		for (j = 0; ; j++) {
++			tmp = bcma_erom_get_addr_desc(bus, eromptr,
++				SCAN_ADDR_TYPE_SLAVE, i);
++			if (tmp < 0) {
++				/* no more entries for port _i_ */
++				/* pr_debug("erom: slave port %d "
++				 * "has %d descriptors\n", i, j); */
++				break;
++			} else {
++				if (i == 0 && j == 0)
++					core->addr = tmp;
++			}
++		}
++	}
++
++	/* get & parse master wrappers */
++	for (i = 0; i < wrappers[0]; i++) {
++		for (j = 0; ; j++) {
++			tmp = bcma_erom_get_addr_desc(bus, eromptr,
++				SCAN_ADDR_TYPE_MWRAP, i);
++			if (tmp < 0) {
++				/* no more entries for port _i_ */
++				/* pr_debug("erom: master wrapper %d "
++				 * "has %d descriptors\n", i, j); */
++				break;
++			} else {
++				if (i == 0 && j == 0)
++					core->wrap = tmp;
++			}
++		}
++	}
++
++	/* get & parse slave wrappers */
++	for (i = 0; i < wrappers[1]; i++) {
++		u8 hack = (ports[1] == 1) ? 0 : 1;
++		for (j = 0; ; j++) {
++			tmp = bcma_erom_get_addr_desc(bus, eromptr,
++				SCAN_ADDR_TYPE_SWRAP, i + hack);
++			if (tmp < 0) {
++				/* no more entries for port _i_ */
++				/* pr_debug("erom: master wrapper %d "
++				 * has %d descriptors\n", i, j); */
++				break;
++			} else {
++				if (wrappers[0] == 0 && !i && !j)
++					core->wrap = tmp;
++			}
++		}
++	}
++	return 0;
++}
++
+ int bcma_bus_scan(struct bcma_bus *bus)
+ {
+ 	u32 erombase;
+ 	u32 __iomem *eromptr, *eromend;
+ 
+-	s32 cia, cib;
+-	u8 ports[2], wrappers[2];
+-
+ 	s32 tmp;
+-	u8 i, j;
+ 
+ 	int err;
+ 
+@@ -236,112 +344,13 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ 		INIT_LIST_HEAD(&core->list);
+ 		core->bus = bus;
+ 
+-		/* get CIs */
+-		cia = bcma_erom_get_ci(bus, &eromptr);
+-		if (cia < 0) {
+-			bcma_erom_push_ent(&eromptr);
+-			if (bcma_erom_is_end(bus, &eromptr))
+-				break;
+-			err= -EILSEQ;
+-			goto out;
+-		}
+-		cib = bcma_erom_get_ci(bus, &eromptr);
+-		if (cib < 0) {
+-			err= -EILSEQ;
+-			goto out;
+-		}
+-
+-		/* parse CIs */
+-		core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+-		core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+-		core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+-		ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+-		ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+-		wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+-		wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+-		core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+-
+-		if (((core->id.manuf == BCMA_MANUF_ARM) &&
+-		     (core->id.id == 0xFFF)) ||
+-		    (ports[1] == 0)) {
+-			bcma_erom_skip_component(bus, &eromptr);
++		err = bcma_get_next_core(bus, &eromptr, core);
++		if (err == -ENXIO)
+ 			continue;
+-		}
+-
+-		/* check if component is a core at all */
+-		if (wrappers[0] + wrappers[1] == 0) {
+-			/* we could save addrl of the router
+-			if (cid == BCMA_CORE_OOB_ROUTER)
+-			 */
+-			bcma_erom_skip_component(bus, &eromptr);
+-			continue;
+-		}
+-
+-		if (bcma_erom_is_bridge(bus, &eromptr)) {
+-			bcma_erom_skip_component(bus, &eromptr);
+-			continue;
+-		}
+-
+-		/* get & parse master ports */
+-		for (i = 0; i < ports[0]; i++) {
+-			u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
+-			if (mst_port_d < 0) {
+-				err= -EILSEQ;
+-				goto out;
+-			}
+-		}
+-
+-		/* get & parse slave ports */
+-		for (i = 0; i < ports[1]; i++) {
+-			for (j = 0; ; j++) {
+-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+-					SCAN_ADDR_TYPE_SLAVE, i);
+-				if (tmp < 0) {
+-					/* no more entries for port _i_ */
+-					/* pr_debug("erom: slave port %d "
+-					 * "has %d descriptors\n", i, j); */
+-					break;
+-				} else {
+-					if (i == 0 && j == 0)
+-						core->addr = tmp;
+-				}
+-			}
+-		}
+-
+-		/* get & parse master wrappers */
+-		for (i = 0; i < wrappers[0]; i++) {
+-			for (j = 0; ; j++) {
+-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+-					SCAN_ADDR_TYPE_MWRAP, i);
+-				if (tmp < 0) {
+-					/* no more entries for port _i_ */
+-					/* pr_debug("erom: master wrapper %d "
+-					 * "has %d descriptors\n", i, j); */
+-					break;
+-				} else {
+-					if (i == 0 && j == 0)
+-						core->wrap = tmp;
+-				}
+-			}
+-		}
+-
+-		/* get & parse slave wrappers */
+-		for (i = 0; i < wrappers[1]; i++) {
+-			u8 hack = (ports[1] == 1) ? 0 : 1;
+-			for (j = 0; ; j++) {
+-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+-					SCAN_ADDR_TYPE_SWRAP, i + hack);
+-				if (tmp < 0) {
+-					/* no more entries for port _i_ */
+-					/* pr_debug("erom: master wrapper %d "
+-					 * has %d descriptors\n", i, j); */
+-					break;
+-				} else {
+-					if (wrappers[0] == 0 && !i && !j)
+-						core->wrap = tmp;
+-				}
+-			}
+-		}
++		else if (err == -ESPIPE)
++			break;
++		else if (err < 0)
++			return err;
+ 
+ 		pr_info("Core %d found: %s "
+ 			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+@@ -351,9 +360,6 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ 
+ 		core->core_index = bus->nr_cores++;
+ 		list_add(&core->list, &bus->cores);
+-		continue;
+-out:
+-		return err;
+ 	}
+ 
+ 	return 0;
diff --git a/target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch b/target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch
new file mode 100644
index 0000000000..8a2de51c4b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch
@@ -0,0 +1,48 @@
+From dd6cbe9b9e2ae563659b34184f4cd9d905dc90d5 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 18 Jun 2011 11:55:47 +0200
+Subject: [PATCH 02/14] bcma: move initializing of struct bcma_bus to own function.
+
+This makes it possible to use this code in some other method.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c |   17 +++++++++++------
+ 1 files changed, 11 insertions(+), 6 deletions(-)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -312,15 +312,10 @@ static int bcma_get_next_core(struct bcm
+ 	return 0;
+ }
+ 
+-int bcma_bus_scan(struct bcma_bus *bus)
++static void bcma_init_bus(struct bcma_bus *bus)
+ {
+-	u32 erombase;
+-	u32 __iomem *eromptr, *eromend;
+-
+ 	s32 tmp;
+ 
+-	int err;
+-
+ 	INIT_LIST_HEAD(&bus->cores);
+ 	bus->nr_cores = 0;
+ 
+@@ -330,6 +325,16 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ 	bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+ 	bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+ 	bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
++}
++
++int bcma_bus_scan(struct bcma_bus *bus)
++{
++	u32 erombase;
++	u32 __iomem *eromptr, *eromend;
++
++	int err;
++
++	bcma_init_bus(bus);
+ 
+ 	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+ 	eromptr = bus->mmio;
diff --git a/target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch b/target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch
new file mode 100644
index 0000000000..c18249d1dd
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch
@@ -0,0 +1,307 @@
+From 9a920f4d8eed485f7b73e9b13dab0e49c64d3ff8 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 18 Jun 2011 14:30:55 +0200
+Subject: [PATCH 03/14] bcma: add functions to scan cores needed on SoCs
+
+The chip common and mips core have to be setup early in the boot
+process to get the cpu clock.
+bcma_bus_early_register() gets pointers to some space to store the core
+data and searches for the chip common and mips core and initializes
+chip common. After that was done and the kernel is out of early boot we
+just have to run bcma_bus_register() and it will search for the other
+cores, initialize and register them.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/bcma_private.h                 |    7 ++
+ drivers/bcma/driver_chipcommon.c            |    5 ++
+ drivers/bcma/driver_pci.c                   |    3 +
+ drivers/bcma/main.c                         |   45 +++++++++++++
+ drivers/bcma/scan.c                         |   95 +++++++++++++++++++++++++--
+ include/linux/bcma/bcma.h                   |    1 +
+ include/linux/bcma/bcma_driver_chipcommon.h |    1 +
+ 7 files changed, 151 insertions(+), 6 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -15,9 +15,16 @@ struct bcma_bus;
+ /* main.c */
+ int bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
++int __init bcma_bus_early_register(struct bcma_bus *bus,
++				   struct bcma_device *core_cc,
++				   struct bcma_device *core_mips);
+ 
+ /* scan.c */
+ int bcma_bus_scan(struct bcma_bus *bus);
++int __init bcma_bus_scan_early(struct bcma_bus *bus,
++			       struct bcma_device_id *match,
++			       struct bcma_device *core);
++void bcma_init_bus(struct bcma_bus *bus);
+ 
+ /* sprom.c */
+ int bcma_sprom_get(struct bcma_bus *bus);
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -23,6 +23,9 @@ static inline u32 bcma_cc_write32_masked
+ 
+ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+ {
++	if (cc->setup_done)
++		return;
++
+ 	if (cc->core->id.rev >= 11)
+ 		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ 	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+@@ -38,6 +41,8 @@ void bcma_core_chipcommon_init(struct bc
+ 		bcma_pmu_init(cc);
+ 	if (cc->capabilities & BCMA_CC_CAP_PCTL)
+ 		pr_err("Power control not implemented!\n");
++
++	cc->setup_done = true;
+ }
+ 
+ /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+--- a/drivers/bcma/driver_pci.c
++++ b/drivers/bcma/driver_pci.c
+@@ -159,7 +159,10 @@ static void bcma_pcicore_serdes_workarou
+ 
+ void bcma_core_pci_init(struct bcma_drv_pci *pc)
+ {
++	if (pc->setup_done)
++		return;
+ 	bcma_pcicore_serdes_workaround(pc);
++	pc->setup_done = true;
+ }
+ 
+ int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -167,6 +167,51 @@ void bcma_bus_unregister(struct bcma_bus
+ 	bcma_unregister_cores(bus);
+ }
+ 
++int __init bcma_bus_early_register(struct bcma_bus *bus,
++				   struct bcma_device *core_cc,
++				   struct bcma_device *core_mips)
++{
++	int err;
++	struct bcma_device *core;
++	struct bcma_device_id match;
++
++	bcma_init_bus(bus);
++
++	match.manuf = BCMA_MANUF_BCM;
++	match.id = BCMA_CORE_CHIPCOMMON;
++	match.class = BCMA_CL_SIM;
++	match.rev = BCMA_ANY_REV;
++
++	/* Scan for devices (cores) */
++	err = bcma_bus_scan_early(bus, &match, core_cc);
++	if (err) {
++		pr_err("Failed to scan for common core: %d\n", err);
++		return -1;
++	}
++
++	match.manuf = BCMA_MANUF_MIPS;
++	match.id = BCMA_CORE_MIPS_74K;
++	match.class = BCMA_CL_SIM;
++	match.rev = BCMA_ANY_REV;
++
++	err = bcma_bus_scan_early(bus, &match, core_mips);
++	if (err) {
++		pr_err("Failed to scan for mips core: %d\n", err);
++		return -1;
++	}
++
++	/* Init CC core */
++	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++	if (core) {
++		bus->drv_cc.core = core;
++		bcma_core_chipcommon_init(&bus->drv_cc);
++	}
++
++	pr_info("Early bus registered\n");
++
++	return 0;
++}
++
+ int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
+ {
+ 	drv->drv.name = drv->name;
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -200,7 +200,20 @@ static s32 bcma_erom_get_addr_desc(struc
+ 	return addrl;
+ }
+ 
++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus,
++						   u16 index)
++{
++	struct bcma_device *core;
++
++	list_for_each_entry(core, &bus->cores, list) {
++		if (core->core_index == index)
++			return core;
++	}
++	return NULL;
++}
++
+ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
++			      struct bcma_device_id *match, int core_num,
+ 			      struct bcma_device *core)
+ {
+ 	s32 tmp;
+@@ -251,6 +264,21 @@ static int bcma_get_next_core(struct bcm
+ 		return -ENXIO;
+ 	}
+ 
++	if (bcma_find_core_by_index(bus, core_num)) {
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENODEV;
++	}
++
++	if (match && ((match->manuf != BCMA_ANY_MANUF &&
++	      match->manuf != core->id.manuf) ||
++	     (match->id != BCMA_ANY_ID && match->id != core->id.id) ||
++	     (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) ||
++	     (match->class != BCMA_ANY_CLASS && match->class != core->id.class)
++	    )) {
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENODEV;
++	}
++
+ 	/* get & parse master ports */
+ 	for (i = 0; i < ports[0]; i++) {
+ 		u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
+@@ -312,10 +340,13 @@ static int bcma_get_next_core(struct bcm
+ 	return 0;
+ }
+ 
+-static void bcma_init_bus(struct bcma_bus *bus)
++void bcma_init_bus(struct bcma_bus *bus)
+ {
+ 	s32 tmp;
+ 
++	if (bus->init_done)
++		return;
++
+ 	INIT_LIST_HEAD(&bus->cores);
+ 	bus->nr_cores = 0;
+ 
+@@ -325,6 +356,7 @@ static void bcma_init_bus(struct bcma_bu
+ 	bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+ 	bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+ 	bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
++	bus->init_done = true;
+ }
+ 
+ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -332,7 +364,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ 	u32 erombase;
+ 	u32 __iomem *eromptr, *eromend;
+ 
+-	int err;
++	int err, core_num = 0;
+ 
+ 	bcma_init_bus(bus);
+ 
+@@ -349,23 +381,74 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ 		INIT_LIST_HEAD(&core->list);
+ 		core->bus = bus;
+ 
+-		err = bcma_get_next_core(bus, &eromptr, core);
+-		if (err == -ENXIO)
++		err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
++		if (err == -ENODEV) {
++			core_num++;
++			continue;
++		} else if (err == -ENXIO)
+ 			continue;
+ 		else if (err == -ESPIPE)
+ 			break;
+ 		else if (err < 0)
+ 			return err;
+ 
++		core->core_index = core_num++;
++		bus->nr_cores++;
++
+ 		pr_info("Core %d found: %s "
+ 			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+-			bus->nr_cores, bcma_device_name(&core->id),
++			core->core_index, bcma_device_name(&core->id),
+ 			core->id.manuf, core->id.id, core->id.rev,
+ 			core->id.class);
+ 
+-		core->core_index = bus->nr_cores++;
+ 		list_add(&core->list, &bus->cores);
+ 	}
+ 
+ 	return 0;
+ }
++
++int __init bcma_bus_scan_early(struct bcma_bus *bus,
++			       struct bcma_device_id *match,
++			       struct bcma_device *core)
++{
++	u32 erombase;
++	u32 __iomem *eromptr, *eromend;
++
++	int err, core_num = 0;
++
++	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
++	eromptr = bus->mmio;
++	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
++
++	bcma_scan_switch_core(bus, erombase);
++
++	while (eromptr < eromend) {
++		memset(core, 0, sizeof(*core));
++		INIT_LIST_HEAD(&core->list);
++		core->bus = bus;
++
++		err = bcma_get_next_core(bus, &eromptr, match, core_num, core);
++		if (err == -ENODEV) {
++			core_num++;
++			continue;
++		} else if (err == -ENXIO)
++			continue;
++		else if (err == -ESPIPE)
++			break;
++		else if (err < 0)
++			return err;
++
++		core->core_index = core_num++;
++		bus->nr_cores++;
++		pr_info("Core %d found: %s "
++			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
++			core->core_index, bcma_device_name(&core->id),
++			core->id.manuf, core->id.id, core->id.rev,
++			core->id.class);
++
++		list_add(&core->list, &bus->cores);
++		return 0;
++	}
++
++	return -ENODEV;
++}
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -185,6 +185,7 @@ struct bcma_bus {
+ 	struct bcma_device *mapped_core;
+ 	struct list_head cores;
+ 	u8 nr_cores;
++	u8 init_done:1;
+ 
+ 	struct bcma_drv_cc drv_cc;
+ 	struct bcma_drv_pci drv_pci;
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -259,6 +259,7 @@ struct bcma_drv_cc {
+ 	u32 status;
+ 	u32 capabilities;
+ 	u32 capabilities_ext;
++	u8 setup_done:1;
+ 	/* Fast Powerup Delay constant */
+ 	u16 fast_pwrup_delay;
+ 	struct bcma_chipcommon_pmu pmu;
diff --git a/target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch b/target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch
new file mode 100644
index 0000000000..10099d1036
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch
@@ -0,0 +1,323 @@
+From a807b2fb233af60028ed38ba237953bcffdf33e9 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 18 Jun 2011 14:31:53 +0200
+Subject: [PATCH 04/14] bcma: add SOC bus
+
+This patch adds support for using bcma on an embedded bus. An embedded
+system like the bcm4716 could register this bus and it searches for the
+bcma cores then.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/Kconfig          |    5 +
+ drivers/bcma/Makefile         |    1 +
+ drivers/bcma/host_soc.c       |  178 +++++++++++++++++++++++++++++++++++++++++
+ drivers/bcma/main.c           |    1 +
+ drivers/bcma/scan.c           |   24 +++++-
+ include/linux/bcma/bcma.h     |    4 +
+ include/linux/bcma/bcma_soc.h |   16 ++++
+ 7 files changed, 227 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/bcma/host_soc.c
+ create mode 100644 include/linux/bcma/bcma_soc.h
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -27,6 +27,11 @@ config BCMA_HOST_PCI
+ 	bool "Support for BCMA on PCI-host bus"
+ 	depends on BCMA_HOST_PCI_POSSIBLE
+ 
++config BCMA_HOST_SOC
++	bool
++	depends on BCMA && MIPS
++	default n
++
+ config BCMA_DEBUG
+ 	bool "BCMA debugging"
+ 	depends on BCMA
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -2,6 +2,7 @@ bcma-y					+= main.o scan.o core.o sprom
+ bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
+ bcma-y					+= driver_pci.o
+ bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
++bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
+ obj-$(CONFIG_BCMA)			+= bcma.o
+ 
+ ccflags-$(CONFIG_BCMA_DEBUG)		:= -DDEBUG
+--- /dev/null
++++ b/drivers/bcma/host_soc.c
+@@ -0,0 +1,178 @@
++/*
++ * Broadcom specific AMBA
++ * System on Chip (SoC) Host
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include "scan.h"
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_soc.h>
++
++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset)
++{
++	return readb(core->io_addr + offset);
++}
++
++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset)
++{
++	return readw(core->io_addr + offset);
++}
++
++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset)
++{
++	return readl(core->io_addr + offset);
++}
++
++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset,
++				 u8 value)
++{
++	writeb(value, core->io_addr + offset);
++}
++
++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset,
++				 u16 value)
++{
++	writew(value, core->io_addr + offset);
++}
++
++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset,
++				 u32 value)
++{
++	writel(value, core->io_addr + offset);
++}
++
++#ifdef CONFIG_BCMA_BLOCKIO
++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer,
++				     size_t count, u16 offset, u8 reg_width)
++{
++	void __iomem *addr = core->io_addr + offset;
++
++	switch (reg_width) {
++	case sizeof(u8): {
++		u8 *buf = buffer;
++
++		while (count) {
++			*buf = __raw_readb(addr);
++			buf++;
++			count--;
++		}
++		break;
++	}
++	case sizeof(u16): {
++		__le16 *buf = buffer;
++
++		WARN_ON(count & 1);
++		while (count) {
++			*buf = (__force __le16)__raw_readw(addr);
++			buf++;
++			count -= 2;
++		}
++		break;
++	}
++	case sizeof(u32): {
++		__le32 *buf = buffer;
++
++		WARN_ON(count & 3);
++		while (count) {
++			*buf = (__force __le32)__raw_readl(addr);
++			buf++;
++			count -= 4;
++		}
++		break;
++	}
++	default:
++		WARN_ON(1);
++	}
++}
++
++static void bcma_host_soc_block_write(struct bcma_device *core,
++				      const void *buffer,
++				      size_t count, u16 offset, u8 reg_width)
++{
++	void __iomem *addr = core->io_addr + offset;
++
++	switch (reg_width) {
++	case sizeof(u8): {
++		const u8 *buf = buffer;
++
++		while (count) {
++			__raw_writeb(*buf, addr);
++			buf++;
++			count--;
++		}
++		break;
++	}
++	case sizeof(u16): {
++		const __le16 *buf = buffer;
++
++		WARN_ON(count & 1);
++		while (count) {
++			__raw_writew((__force u16)(*buf), addr);
++			buf++;
++			count -= 2;
++		}
++		break;
++	}
++	case sizeof(u32): {
++		const __le32 *buf = buffer;
++
++		WARN_ON(count & 3);
++		while (count) {
++			__raw_writel((__force u32)(*buf), addr);
++			buf++;
++			count -= 4;
++		}
++		break;
++	}
++	default:
++		WARN_ON(1);
++	}
++}
++#endif /* CONFIG_BCMA_BLOCKIO */
++
++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset)
++{
++	return readl(core->io_wrap + offset);
++}
++
++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset,
++				  u32 value)
++{
++	writel(value, core->io_wrap + offset);
++}
++
++const struct bcma_host_ops bcma_host_soc_ops = {
++	.read8		= bcma_host_soc_read8,
++	.read16		= bcma_host_soc_read16,
++	.read32		= bcma_host_soc_read32,
++	.write8		= bcma_host_soc_write8,
++	.write16	= bcma_host_soc_write16,
++	.write32	= bcma_host_soc_write32,
++#ifdef CONFIG_BCMA_BLOCKIO
++	.block_read	= bcma_host_soc_block_read,
++	.block_write	= bcma_host_soc_block_write,
++#endif
++	.aread32	= bcma_host_soc_aread32,
++	.awrite32	= bcma_host_soc_awrite32,
++};
++
++int __init bcma_host_soc_register(struct bcma_soc *soc)
++{
++	struct bcma_bus *bus = &soc->bus;
++
++	/* iomap only first core. We have to read some register on this core
++	 * to scan the bus.
++	 */
++	bus->mmio = ioremap(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1);
++	if (!bus->mmio)
++		return -ENOMEM;
++
++	/* Host specific */
++	bus->hosttype = BCMA_HOSTTYPE_SOC;
++	bus->ops = &bcma_host_soc_ops;
++
++	/* Register */
++	return bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
++}
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -95,6 +95,7 @@ static int bcma_register_cores(struct bc
+ 			break;
+ 		case BCMA_HOSTTYPE_NONE:
+ 		case BCMA_HOSTTYPE_SDIO:
++		case BCMA_HOSTTYPE_SOC:
+ 			break;
+ 		}
+ 
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -337,6 +337,14 @@ static int bcma_get_next_core(struct bcm
+ 			}
+ 		}
+ 	}
++	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++		core->io_addr = ioremap(core->addr, BCMA_CORE_SIZE);
++		if (!core->io_addr)
++			return -ENOMEM;
++		core->io_wrap = ioremap(core->wrap, BCMA_CORE_SIZE);
++		if (!core->io_wrap)
++			return -ENOMEM;
++	}
+ 	return 0;
+ }
+ 
+@@ -369,7 +377,13 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ 	bcma_init_bus(bus);
+ 
+ 	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+-	eromptr = bus->mmio;
++	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++		eromptr = ioremap(erombase, BCMA_CORE_SIZE);
++		if (!eromptr)
++			return -ENOMEM;
++	} else
++		eromptr = bus->mmio;
++
+ 	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+ 
+ 	bcma_scan_switch_core(bus, erombase);
+@@ -417,7 +431,13 @@ int __init bcma_bus_scan_early(struct bc
+ 	int err, core_num = 0;
+ 
+ 	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+-	eromptr = bus->mmio;
++	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++		eromptr = ioremap(erombase, BCMA_CORE_SIZE);
++		if (!eromptr)
++			return -ENOMEM;
++	} else
++		eromptr = bus->mmio;
++
+ 	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+ 
+ 	bcma_scan_switch_core(bus, erombase);
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -17,6 +17,7 @@ enum bcma_hosttype {
+ 	BCMA_HOSTTYPE_NONE,
+ 	BCMA_HOSTTYPE_PCI,
+ 	BCMA_HOSTTYPE_SDIO,
++	BCMA_HOSTTYPE_SOC,
+ };
+ 
+ struct bcma_chipinfo {
+@@ -133,6 +134,9 @@ struct bcma_device {
+ 	u32 addr;
+ 	u32 wrap;
+ 
++	void __iomem *io_addr;
++	void __iomem *io_wrap;
++
+ 	void *drvdata;
+ 	struct list_head list;
+ };
+--- /dev/null
++++ b/include/linux/bcma/bcma_soc.h
+@@ -0,0 +1,16 @@
++#ifndef LINUX_BCMA_SOC_H_
++#define LINUX_BCMA_SOC_H_
++
++#include <linux/bcma/bcma.h>
++
++struct bcma_soc {
++	struct bcma_bus bus;
++	struct bcma_device core_cc;
++	struct bcma_device core_mips;
++};
++
++int __init bcma_host_soc_register(struct bcma_soc *soc);
++
++int bcma_bus_register(struct bcma_bus *bus);
++
++#endif /* LINUX_BCMA_SOC_H_ */
diff --git a/target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch b/target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch
new file mode 100644
index 0000000000..62cd10290e
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch
@@ -0,0 +1,402 @@
+From 0a1a5fd8aab864e7b531ab88fd317ff7278d884d Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:32 +0200
+Subject: [PATCH 05/14] bcma: add mips driver
+
+This adds a mips driver to bcma. This is only found on embedded
+devices. For now the driver just initializes the irqs used on this
+system.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/Kconfig                  |   11 ++-
+ drivers/bcma/Makefile                 |    1 +
+ drivers/bcma/driver_mips.c            |  234 +++++++++++++++++++++++++++++++++
+ drivers/bcma/main.c                   |   19 +++
+ include/linux/bcma/bcma.h             |    2 +
+ include/linux/bcma/bcma_driver_mips.h |   49 +++++++
+ 6 files changed, 315 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/bcma/driver_mips.c
+ create mode 100644 include/linux/bcma/bcma_driver_mips.h
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -29,9 +29,18 @@ config BCMA_HOST_PCI
+ 
+ config BCMA_HOST_SOC
+ 	bool
+-	depends on BCMA && MIPS
++	depends on BCMA_DRIVER_MIPS
+ 	default n
+ 
++config BCMA_DRIVER_MIPS
++	bool "BCMA Broadcom MIPS core driver"
++	depends on BCMA && MIPS
++	help
++	  Driver for the Broadcom MIPS core attached to Broadcom specific
++	  Advanced Microcontroller Bus.
++
++	  If unsure, say N
++
+ config BCMA_DEBUG
+ 	bool "BCMA debugging"
+ 	depends on BCMA
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -1,6 +1,7 @@
+ bcma-y					+= main.o scan.o core.o sprom.o
+ bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
+ bcma-y					+= driver_pci.o
++bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
+ bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
+ bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
+ obj-$(CONFIG_BCMA)			+= bcma.o
+--- /dev/null
++++ b/drivers/bcma/driver_mips.c
+@@ -0,0 +1,234 @@
++/*
++ * Broadcom specific AMBA
++ * Broadcom MIPS32 74K core driver
++ *
++ * Copyright 2009, Broadcom Corporation
++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com>
++ * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++
++#include <linux/bcma/bcma.h>
++
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++#include <linux/serial_reg.h>
++#include <linux/time.h>
++
++/* The 47162a0 hangs when reading its registers */
++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
++{
++	return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 &&
++	       dev->id.id == BCMA_CORE_MIPS_74K;
++}
++
++static inline u32 mips_read32(struct bcma_drv_mips *mcore,
++			      u16 offset)
++{
++	return bcma_read32(mcore->core, offset);
++}
++
++static inline void mips_write32(struct bcma_drv_mips *mcore,
++				u16 offset,
++				u32 value)
++{
++	bcma_write32(mcore->core, offset, value);
++}
++
++static const u32 ipsflag_irq_mask[] = {
++	0,
++	BCMA_MIPS_IPSFLAG_IRQ1,
++	BCMA_MIPS_IPSFLAG_IRQ2,
++	BCMA_MIPS_IPSFLAG_IRQ3,
++	BCMA_MIPS_IPSFLAG_IRQ4,
++};
++
++static const u32 ipsflag_irq_shift[] = {
++	0,
++	BCMA_MIPS_IPSFLAG_IRQ1_SHIFT,
++	BCMA_MIPS_IPSFLAG_IRQ2_SHIFT,
++	BCMA_MIPS_IPSFLAG_IRQ3_SHIFT,
++	BCMA_MIPS_IPSFLAG_IRQ4_SHIFT,
++};
++
++static u32 bcma_core_mips_irqflag(struct bcma_device *dev)
++{
++	u32 flag;
++
++	if (bcma_core_mips_bcm47162a0_quirk(dev))
++		return dev->core_index;
++	flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
++
++	return flag & 0x1F;
++}
++
++
++/* Get the MIPS IRQ assignment for a specified device.
++ * If unassigned, 0 is returned.
++ * If disabled, 5 is returned.
++ */
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++{
++	struct bcma_device *mdev = dev->bus->drv_mips.core;
++	u32 irqflag;
++	unsigned int irq;
++
++	irqflag = bcma_core_mips_irqflag(dev);
++
++	for (irq = 1; irq <= 4; irq++)
++		if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
++		    (1 << irqflag))
++			return irq;
++
++	return 0;
++}
++EXPORT_SYMBOL(bcma_core_mips_irq);
++
++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
++{
++	unsigned int oldirq = bcma_core_mips_irq(dev);
++	struct bcma_bus *bus = dev->bus;
++	struct bcma_device *mdev = bus->drv_mips.core;
++	u32 irqflag;
++
++	irqflag = bcma_core_mips_irqflag(dev);
++	BUG_ON(oldirq == 6);
++
++	dev->irq = irq + 2;
++
++	/* clear the old irq */
++	if (oldirq == 0)
++		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
++			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
++			    ~(1 << irqflag));
++	else
++		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
++
++	/* assign the new one */
++	if (irq == 0) {
++		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
++			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
++			    (1 << irqflag));
++	} else {
++		u32 oldirqflag = bcma_read32(mdev,
++					     BCMA_MIPS_MIPS74K_INTMASK(irq));
++		if (oldirqflag) {
++			struct bcma_device *core;
++
++			/* backplane irq line is in use, find out who uses
++			 * it and set user to irq 0
++			 */
++			list_for_each_entry_reverse(core, &bus->cores, list) {
++				if ((1 << bcma_core_mips_irqflag(core)) ==
++				    oldirqflag) {
++					bcma_core_mips_set_irq(core, 0);
++					break;
++				}
++			}
++		}
++		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq),
++			     1 << irqflag);
++	}
++
++	pr_info("set_irq: core 0x%04x, irq %d => %d\n",
++		dev->id.id, oldirq + 2, irq + 2);
++}
++
++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
++{
++	int i;
++	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
++	printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
++	for (i = 0; i <= 6; i++)
++		printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
++	printk("\n");
++}
++
++static void bcma_core_mips_dump_irq(struct bcma_bus *bus)
++{
++	struct bcma_device *core;
++
++	list_for_each_entry_reverse(core, &bus->cores, list) {
++		bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
++	}
++}
++
++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
++{
++	struct bcma_bus *bus = mcore->core->bus;
++
++	mcore->flash_buswidth = 2;
++	if (bus->drv_cc.core) {
++		mcore->flash_window = 0x1c000000;
++		mcore->flash_window_size = 0x02000000;
++		switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
++		case BCMA_CC_FLASHT_STSER:
++		case BCMA_CC_FLASHT_ATSER:
++			pr_err("Serial flash not supported.\n");
++			break;
++		case BCMA_CC_FLASHT_PARA:
++			if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
++			     BCMA_CC_OTPS) == 0)
++				mcore->flash_buswidth = 1;
++			break;
++		}
++	} else {
++		mcore->flash_window = 0x1fc00000;
++		mcore->flash_window_size = 0x00400000;
++	}
++}
++
++void bcma_core_mips_init(struct bcma_drv_mips *mcore)
++{
++	struct bcma_bus *bus;
++	struct bcma_device *core;
++	bus = mcore->core->bus;
++
++	pr_info("Initializing MIPS core...\n");
++
++	if (!mcore->setup_done)
++		mcore->assigned_irqs = 1;
++
++	/* Assign IRQs to all cores on the bus */
++	list_for_each_entry_reverse(core, &bus->cores, list) {
++		int mips_irq;
++		if (core->irq)
++			continue;
++
++		mips_irq = bcma_core_mips_irq(core);
++		if (mips_irq > 4)
++			core->irq = 0;
++		else
++			core->irq = mips_irq + 2;
++		if (core->irq > 5)
++			continue;
++		switch (core->id.id) {
++		case BCMA_CORE_PCI:
++		case BCMA_CORE_PCIE:
++		case BCMA_CORE_ETHERNET:
++		case BCMA_CORE_ETHERNET_GBIT:
++		case BCMA_CORE_MAC_GBIT:
++		case BCMA_CORE_80211:
++		case BCMA_CORE_USB20_HOST:
++			/* These devices get their own IRQ line if available,
++			 * the rest goes on IRQ0
++			 */
++			if (mcore->assigned_irqs <= 4)
++				bcma_core_mips_set_irq(core,
++						       mcore->assigned_irqs++);
++			break;
++		}
++	}
++	pr_info("IRQ reconfiguration done\n");
++	bcma_core_mips_dump_irq(bus);
++
++	if (mcore->setup_done)
++		return;
++
++	bcma_core_mips_flash_detect(mcore);
++	mcore->setup_done = true;
++}
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -80,6 +80,7 @@ static int bcma_register_cores(struct bc
+ 		case BCMA_CORE_CHIPCOMMON:
+ 		case BCMA_CORE_PCI:
+ 		case BCMA_CORE_PCIE:
++		case BCMA_CORE_MIPS_74K:
+ 			continue;
+ 		}
+ 
+@@ -141,6 +142,15 @@ int bcma_bus_register(struct bcma_bus *b
+ 		bcma_core_chipcommon_init(&bus->drv_cc);
+ 	}
+ 
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++	/* Init MIPS core */
++	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++	if (core) {
++		bus->drv_mips.core = core;
++		bcma_core_mips_init(&bus->drv_mips);
++	}
++#endif
++
+ 	/* Init PCIE core */
+ 	core = bcma_find_core(bus, BCMA_CORE_PCIE);
+ 	if (core) {
+@@ -208,6 +218,15 @@ int __init bcma_bus_early_register(struc
+ 		bcma_core_chipcommon_init(&bus->drv_cc);
+ 	}
+ 
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++	/* Init MIPS core */
++	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++	if (core) {
++		bus->drv_mips.core = core;
++		bcma_core_mips_init(&bus->drv_mips);
++	}
++#endif
++
+ 	pr_info("Early bus registered\n");
+ 
+ 	return 0;
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -6,6 +6,7 @@
+ 
+ #include <linux/bcma/bcma_driver_chipcommon.h>
+ #include <linux/bcma/bcma_driver_pci.h>
++#include <linux/bcma/bcma_driver_mips.h>
+ #include <linux/ssb/ssb.h> /* SPROM sharing */
+ 
+ #include "bcma_regs.h"
+@@ -193,6 +194,7 @@ struct bcma_bus {
+ 
+ 	struct bcma_drv_cc drv_cc;
+ 	struct bcma_drv_pci drv_pci;
++	struct bcma_drv_mips drv_mips;
+ 
+ 	/* We decided to share SPROM struct with SSB as long as we do not need
+ 	 * any hacks for BCMA. This simplifies drivers code. */
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -0,0 +1,49 @@
++#ifndef LINUX_BCMA_DRIVER_MIPS_H_
++#define LINUX_BCMA_DRIVER_MIPS_H_
++
++#define BCMA_MIPS_IPSFLAG		0x0F08
++/* which sbflags get routed to mips interrupt 1 */
++#define	 BCMA_MIPS_IPSFLAG_IRQ1		0x0000003F
++#define	 BCMA_MIPS_IPSFLAG_IRQ1_SHIFT	0
++/* which sbflags get routed to mips interrupt 2 */
++#define	 BCMA_MIPS_IPSFLAG_IRQ2		0x00003F00
++#define	 BCMA_MIPS_IPSFLAG_IRQ2_SHIFT	8
++/* which sbflags get routed to mips interrupt 3 */
++#define	 BCMA_MIPS_IPSFLAG_IRQ3		0x003F0000
++#define	 BCMA_MIPS_IPSFLAG_IRQ3_SHIFT	16
++/* which sbflags get routed to mips interrupt 4 */
++#define	 BCMA_MIPS_IPSFLAG_IRQ4		0x3F000000
++#define	 BCMA_MIPS_IPSFLAG_IRQ4_SHIFT	24
++
++/* MIPS 74K core registers */
++#define BCMA_MIPS_MIPS74K_CORECTL	0x0000
++#define BCMA_MIPS_MIPS74K_EXCEPTBASE	0x0004
++#define BCMA_MIPS_MIPS74K_BIST		0x000C
++#define BCMA_MIPS_MIPS74K_INTMASK_INT0	0x0014
++#define BCMA_MIPS_MIPS74K_INTMASK(int) \
++	((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0)
++#define BCMA_MIPS_MIPS74K_NMIMASK	0x002C
++#define BCMA_MIPS_MIPS74K_GPIOSEL	0x0040
++#define BCMA_MIPS_MIPS74K_GPIOOUT	0x0044
++#define BCMA_MIPS_MIPS74K_GPIOEN	0x0048
++#define BCMA_MIPS_MIPS74K_CLKCTLST	0x01E0
++
++#define BCMA_MIPS_OOBSELOUTA30		0x100
++
++struct bcma_device;
++
++struct bcma_drv_mips {
++	struct bcma_device *core;
++	u8 setup_done:1;
++	unsigned int assigned_irqs;
++
++	u8 flash_buswidth;
++	u32 flash_window;
++	u32 flash_window_size;
++};
++
++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
++
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
++
++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
diff --git a/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch b/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch
new file mode 100644
index 0000000000..78724ee695
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch
@@ -0,0 +1,151 @@
+From b7c100827012ba588089807475affe0c69a3f817 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:33 +0200
+Subject: [PATCH 06/14] bcma: add serial console support
+
+This adds support for serial console to bcma, when operating on an
+embedded device.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/bcma_private.h           |    6 +++
+ drivers/bcma/driver_chipcommon.c      |   64 +++++++++++++++++++++++++++++++++
+ drivers/bcma/driver_mips.c            |    9 +++++
+ include/linux/bcma/bcma_driver_mips.h |   11 ++++++
+ 4 files changed, 90 insertions(+), 0 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -29,6 +29,12 @@ void bcma_init_bus(struct bcma_bus *bus)
+ /* sprom.c */
+ int bcma_sprom_get(struct bcma_bus *bus);
+ 
++/* driver_chipcommon.c */
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++extern int bcma_chipco_serial_init(struct bcma_drv_cc *cc,
++				   struct bcma_drv_mips_serial_port *ports);
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
++
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+ extern int __init bcma_host_pci_init(void);
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -92,3 +92,67 @@ u32 bcma_chipco_gpio_polarity(struct bcm
+ {
+ 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+ }
++
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++int bcma_chipco_serial_init(struct bcma_drv_cc *cc,
++			    struct bcma_drv_mips_serial_port *ports)
++{
++	int nr_ports = 0;
++	u32 plltype;
++	unsigned int irq;
++	u32 baud_base, div;
++	u32 i, n;
++	unsigned int ccrev = cc->core->id.rev;
++
++	plltype = (cc->capabilities & BCMA_CC_CAP_PLLT);
++	irq = bcma_core_mips_irq(cc->core);
++
++	if ((ccrev >= 11) && (ccrev != 15) && (ccrev != 20)) {
++		/* Fixed ALP clock */
++		baud_base = 20000000;
++		if (cc->capabilities & BCMA_CC_CAP_PMU) {
++			/* FIXME: baud_base is different for devices with a PMU */
++			WARN_ON(1);
++		}
++		div = 1;
++		if (ccrev >= 21) {
++			/* Turn off UART clock before switching clocksource. */
++			bcma_cc_write32(cc, BCMA_CC_CORECTL,
++				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
++				       & ~BCMA_CC_CORECTL_UARTCLKEN);
++		}
++		/* Set the override bit so we don't divide it */
++		bcma_cc_write32(cc, BCMA_CC_CORECTL,
++			       bcma_cc_read32(cc, BCMA_CC_CORECTL)
++			       | BCMA_CC_CORECTL_UARTCLK0);
++		if (ccrev >= 21) {
++			/* Re-enable the UART clock. */
++			bcma_cc_write32(cc, BCMA_CC_CORECTL,
++				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
++				       | BCMA_CC_CORECTL_UARTCLKEN);
++		}
++	} else
++		pr_err("serial not supported on this device ccrev: 0x%x\n",
++		       ccrev);
++
++	/* Determine the registers of the UARTs */
++	n = (cc->capabilities & BCMA_CC_CAP_NRUART);
++	for (i = 0; i < n; i++) {
++		void __iomem *cc_mmio;
++		void __iomem *uart_regs;
++
++		cc_mmio = cc->core->bus->mmio +
++			  (cc->core->core_index * BCMA_CORE_SIZE);
++		uart_regs = cc_mmio + BCMA_CC_UART0_DATA;
++		uart_regs += (i * 256);
++
++		nr_ports++;
++		ports[i].regs = uart_regs;
++		ports[i].irq = irq;
++		ports[i].baud_base = baud_base;
++		ports[i].reg_shift = 0;
++	}
++
++	return nr_ports;
++}
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -157,6 +157,14 @@ static void bcma_core_mips_dump_irq(stru
+ 	}
+ }
+ 
++static void bcma_core_mips_serial_init(struct bcma_drv_mips *mcore)
++{
++	struct bcma_bus *bus = mcore->core->bus;
++
++	mcore->nr_serial_ports = bcma_chipco_serial_init(&bus->drv_cc,
++							 mcore->serial_ports);
++}
++
+ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
+ {
+ 	struct bcma_bus *bus = mcore->core->bus;
+@@ -229,6 +237,7 @@ void bcma_core_mips_init(struct bcma_drv
+ 	if (mcore->setup_done)
+ 		return;
+ 
++	bcma_core_mips_serial_init(mcore);
+ 	bcma_core_mips_flash_detect(mcore);
+ 	mcore->setup_done = true;
+ }
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -32,11 +32,22 @@
+ 
+ struct bcma_device;
+ 
++struct bcma_drv_mips_serial_port {
++	void *regs;
++	unsigned long clockspeed;
++	unsigned int irq;
++	unsigned int baud_base;
++	unsigned int reg_shift;
++};
++
+ struct bcma_drv_mips {
+ 	struct bcma_device *core;
+ 	u8 setup_done:1;
+ 	unsigned int assigned_irqs;
+ 
++	int nr_serial_ports;
++	struct bcma_drv_mips_serial_port serial_ports[4];
++
+ 	u8 flash_buswidth;
+ 	u32 flash_window;
+ 	u32 flash_window_size;
diff --git a/target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch b/target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch
new file mode 100644
index 0000000000..7acdb74304
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch
@@ -0,0 +1,204 @@
+From 257d5fe12600f08df764cac0abc17bef7b6fae9b Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 19 Jun 2011 17:51:30 +0200
+Subject: [PATCH 07/14] bcma: get CPU clock
+
+Add method to return the clock of the CPU. This is needed by the arch
+code to calculate the mips_hpt_frequency.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/bcma_private.h                 |    3 +
+ drivers/bcma/driver_chipcommon_pmu.c        |   87 +++++++++++++++++++++++++++
+ drivers/bcma/driver_mips.c                  |   12 ++++
+ include/linux/bcma/bcma_driver_chipcommon.h |   35 +++++++++++
+ include/linux/bcma/bcma_driver_mips.h       |    1 +
+ 5 files changed, 138 insertions(+), 0 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -29,6 +29,9 @@ void bcma_init_bus(struct bcma_bus *bus)
+ /* sprom.c */
+ int bcma_sprom_get(struct bcma_bus *bus);
+ 
++/* driver_chipcommon_pmu.c */
++extern u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
++
+ /* driver_chipcommon.c */
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ extern int bcma_chipco_serial_init(struct bcma_drv_cc *cc,
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -11,6 +11,13 @@
+ #include "bcma_private.h"
+ #include <linux/bcma/bcma.h>
+ 
++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
++{
++	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
++	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
++	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++}
++
+ static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+ 					u32 offset, u32 mask, u32 set)
+ {
+@@ -136,3 +143,83 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ 	bcma_pmu_swreg_init(cc);
+ 	bcma_pmu_workarounds(cc);
+ }
++
++static u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
++{
++	struct bcma_bus *bus = cc->core->bus;
++
++	switch (bus->chipinfo.id) {
++	case 0x4716:
++	case 0x4748:
++	case 47162:
++		/* always 20Mhz */
++		return 20000 * 1000;
++	default:
++		pr_warn("No ALP clock specified for %04X device, "
++			"pmu rev. %d, using default %d Hz\n",
++			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
++	}
++	return BCMA_CC_PMU_ALP_CLOCK;
++}
++
++/* Find the output of the "m" pll divider given pll controls that start with
++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
++ */
++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++{
++	u32 tmp, div, ndiv, p1, p2, fc;
++
++	BUG_ON(!m || m > 4);
++
++	BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0));
++
++	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF);
++	p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT;
++	p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT;
++
++	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF);
++	div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) &
++		BCMA_CC_PPL_MDIV_MASK;
++
++	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF);
++	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
++
++	/* Do calculation in Mhz */
++	fc = bcma_pmu_alp_clock(cc) / 1000000;
++	fc = (p1 * ndiv * fc) / p2;
++
++	/* Return clock in Hertz */
++	return (fc / div) * 1000000;
++}
++
++/* query bus clock frequency for PMU-enabled chipcommon */
++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
++{
++	struct bcma_bus *bus = cc->core->bus;
++
++	switch (bus->chipinfo.id) {
++	case 0x4716:
++	case 0x4748:
++	case 47162:
++		return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
++				      BCMA_CC_PMU5_MAINPLL_SSB);
++	default:
++		pr_warn("No backplane clock specified for %04X device, "
++			"pmu rev. %d, using default %d Hz\n",
++			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
++	}
++	return BCMA_CC_PMU_HT_CLOCK;
++}
++
++/* query cpu clock frequency for PMU-enabled chipcommon */
++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
++{
++	struct bcma_bus *bus = cc->core->bus;
++
++	if ((cc->pmu.rev == 5 || cc->pmu.rev == 6 || cc->pmu.rev == 7) &&
++	    (bus->chipinfo.id != 0x4319))
++		return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
++				      BCMA_CC_PMU5_MAINPLL_CPU);
++
++	return bcma_pmu_get_clockcontrol(cc);
++}
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -157,6 +157,18 @@ static void bcma_core_mips_dump_irq(stru
+ 	}
+ }
+ 
++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore)
++{
++	struct bcma_bus *bus = mcore->core->bus;
++
++	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
++		return bcma_pmu_get_clockcpu(&bus->drv_cc);
++
++	pr_err("No PMU available, need this to get the cpu clock\n");
++	return 0;
++}
++EXPORT_SYMBOL(bcma_cpu_clock);
++
+ static void bcma_core_mips_serial_init(struct bcma_drv_mips *mcore)
+ {
+ 	struct bcma_bus *bus = mcore->core->bus;
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -246,6 +246,41 @@
+ #define BCMA_CC_PLLCTL_DATA		0x0664
+ #define BCMA_CC_SPROM			0x0830 /* SPROM beginning */
+ 
++/* Divider allocation in 4716/47162/5356 */
++#define BCMA_CC_PMU5_MAINPLL_CPU	1
++#define BCMA_CC_PMU5_MAINPLL_MEM	2
++#define BCMA_CC_PMU5_MAINPLL_SSB	3
++
++/* PLL usage in 4716/47162 */
++#define BCMA_CC_PMU4716_MAINPLL_PLL0	12
++
++/* ALP clock on pre-PMU chips */
++#define BCMA_CC_PMU_ALP_CLOCK		20000000
++/* HT clock for systems with PMU-enabled chipcommon */
++#define BCMA_CC_PMU_HT_CLOCK		80000000
++
++/* PMU rev 5 (& 6) */
++#define	BCMA_CC_PPL_P1P2_OFF		0
++#define	BCMA_CC_PPL_P1_MASK		0x0f000000
++#define	BCMA_CC_PPL_P1_SHIFT		24
++#define	BCMA_CC_PPL_P2_MASK		0x00f00000
++#define	BCMA_CC_PPL_P2_SHIFT		20
++#define	BCMA_CC_PPL_M14_OFF		1
++#define	BCMA_CC_PPL_MDIV_MASK		0x000000ff
++#define	BCMA_CC_PPL_MDIV_WIDTH		8
++#define	BCMA_CC_PPL_NM5_OFF		2
++#define	BCMA_CC_PPL_NDIV_MASK		0xfff00000
++#define	BCMA_CC_PPL_NDIV_SHIFT		20
++#define	BCMA_CC_PPL_FMAB_OFF		3
++#define	BCMA_CC_PPL_MRAT_MASK		0xf0000000
++#define	BCMA_CC_PPL_MRAT_SHIFT		28
++#define	BCMA_CC_PPL_ABRAT_MASK		0x08000000
++#define	BCMA_CC_PPL_ABRAT_SHIFT		27
++#define	BCMA_CC_PPL_FDIV_MASK		0x07ffffff
++#define	BCMA_CC_PPL_PLLCTL_OFF		4
++#define	BCMA_CC_PPL_PCHI_OFF		5
++#define	BCMA_CC_PPL_PCHI_MASK		0x0000003f
++
+ /* Data for the PMU, if available.
+  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+  */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -54,6 +54,7 @@ struct bcma_drv_mips {
+ };
+ 
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+ 
+ extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ 
diff --git a/target/linux/brcm47xx/patches-3.0/0008-bcma-add-pci-e-host-mode.patch b/target/linux/brcm47xx/patches-3.0/0008-bcma-add-pci-e-host-mode.patch
new file mode 100644
index 0000000000..48c18bb0b2
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0008-bcma-add-pci-e-host-mode.patch
@@ -0,0 +1,140 @@
+From f93062e72447b4a4a51afbe33ea086ce8c922587 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 19 Jun 2011 17:52:09 +0200
+Subject: [PATCH 08/14] bcma: add pci(e) host mode
+
+This adds some stub for a pci(e) host controller. This controller is
+found on some embedded devices to attach other chips.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/Kconfig                 |    6 ++++
+ drivers/bcma/Makefile                |    1 +
+ drivers/bcma/bcma_private.h          |    6 ++++
+ drivers/bcma/driver_pci.c            |   14 ++++++++++-
+ drivers/bcma/driver_pci_host.c       |   43 ++++++++++++++++++++++++++++++++++
+ include/linux/bcma/bcma_driver_pci.h |    1 +
+ 6 files changed, 70 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/bcma/driver_pci_host.c
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -32,6 +32,12 @@ config BCMA_HOST_SOC
+ 	depends on BCMA_DRIVER_MIPS
+ 	default n
+ 
++config BCMA_DRIVER_PCI_HOSTMODE
++	bool "Hostmode support for BCMA PCI core"
++	depends on BCMA_DRIVER_MIPS
++	help
++	  PCIcore hostmode operation (external PCI bus).
++
+ config BCMA_DRIVER_MIPS
+ 	bool "BCMA Broadcom MIPS core driver"
+ 	depends on BCMA && MIPS
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -1,6 +1,7 @@
+ bcma-y					+= main.o scan.o core.o sprom.o
+ bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
+ bcma-y					+= driver_pci.o
++bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)	+= driver_pci_host.o
+ bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
+ bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
+ bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -38,6 +38,12 @@ extern int bcma_chipco_serial_init(struc
+ 				   struct bcma_drv_mips_serial_port *ports);
+ #endif /* CONFIG_BCMA_DRIVER_MIPS */
+ 
++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
++/* driver_pci_host.c */
++int bcma_core_pci_in_hostmode(struct bcma_drv_pci *pc);
++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
++#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+ extern int __init bcma_host_pci_init(void);
+--- a/drivers/bcma/driver_pci.c
++++ b/drivers/bcma/driver_pci.c
+@@ -159,9 +159,21 @@ static void bcma_pcicore_serdes_workarou
+ 
+ void bcma_core_pci_init(struct bcma_drv_pci *pc)
+ {
++	struct bcma_device *core = pc->core;
++
+ 	if (pc->setup_done)
+ 		return;
+-	bcma_pcicore_serdes_workaround(pc);
++
++	if (!bcma_core_is_enabled(core))
++		bcma_core_enable(core, 0);
++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
++	pc->hostmode = bcma_core_pci_in_hostmode(pc);
++	if (pc->hostmode)
++		bcma_core_pci_hostmode_init(pc);
++#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++	if (!pc->hostmode)
++		bcma_pcicore_serdes_workaround(pc);
++
+ 	pc->setup_done = true;
+ }
+ 
+--- /dev/null
++++ b/drivers/bcma/driver_pci_host.c
+@@ -0,0 +1,43 @@
++/*
++ * Broadcom specific AMBA
++ * PCI Host mode
++ *
++ * Copyright 2005, Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++#include <asm/paccess.h>
++/* Probe a 32bit value on the bus and catch bus exceptions.
++ * Returns nonzero on a bus exception.
++ * This is MIPS specific */
++#define mips_busprobe32(val, addr)	get_dbe((val), ((u32 *)(addr)))
++
++
++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
++{
++	/* TODO: implement PCI host mode */
++}
++
++int bcma_core_pci_in_hostmode(struct bcma_drv_pci *pc)
++{
++	struct bcma_bus *bus = pc->core->bus;
++	u16 chipid_top;
++	u32 tmp;
++
++	chipid_top = (bus->chipinfo.id & 0xFF00);
++	if (chipid_top != 0x4700 &&
++	    chipid_top != 0x5300)
++		return 0;
++
++/* TODO: add when sprom is available
++ * if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
++ *		return 0;
++ */
++
++	return !mips_busprobe32(tmp, (bus->mmio + (pc->core->core_index *
++						   BCMA_CORE_SIZE)));
++}
+--- a/include/linux/bcma/bcma_driver_pci.h
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -78,6 +78,7 @@ struct pci_dev;
+ struct bcma_drv_pci {
+ 	struct bcma_device *core;
+ 	u8 setup_done:1;
++	u8 hostmode:1;
+ };
+ 
+ /* Register access */
diff --git a/target/linux/brcm47xx/patches-3.0/0009-bcma-add-check-if-sprom-is-available-before-accessin.patch b/target/linux/brcm47xx/patches-3.0/0009-bcma-add-check-if-sprom-is-available-before-accessin.patch
new file mode 100644
index 0000000000..931b6e3d0e
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0009-bcma-add-check-if-sprom-is-available-before-accessin.patch
@@ -0,0 +1,37 @@
+From 5972feafaa3c71c1497b4ef4101b3c6855b7b64e Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 19 Jun 2011 19:14:11 +0200
+Subject: [PATCH 09/14] bcma: add check if sprom is available before accessing it.
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/main.c  |    4 +++-
+ drivers/bcma/sprom.c |    3 +++
+ 2 files changed, 6 insertions(+), 1 deletions(-)
+
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -160,7 +160,9 @@ int bcma_bus_register(struct bcma_bus *b
+ 
+ 	/* Try to get SPROM */
+ 	err = bcma_sprom_get(bus);
+-	if (err) {
++	if (err == -ENOENT) {
++		pr_err("No SPROM available\n");
++	} else if (err) {
+ 		pr_err("Failed to get SPROM: %d\n", err);
+ 		return -ENOENT;
+ 	}
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -143,6 +143,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ 	if (!bus->drv_cc.core)
+ 		return -EOPNOTSUPP;
+ 
++	if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
++		return -ENOENT;
++
+ 	sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+ 			GFP_KERNEL);
+ 	if (!sprom)
diff --git a/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-prepare-to-support-different-buses.patch b/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-prepare-to-support-different-buses.patch
new file mode 100644
index 0000000000..4363a5bd99
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-prepare-to-support-different-buses.patch
@@ -0,0 +1,439 @@
+From c0886db6357de20fba4f7c0602eceefba3ad343b Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:36 +0200
+Subject: [PATCH 10/14] bcm47xx: prepare to support different buses
+
+The ssb bus is not hod directly any more. there is now a union which
+contains all the supported buses, now just ssb. As just one system bus
+can be used at a time the union does not cause any problems.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/gpio.c                     |   56 ++++++++++++++++----------
+ arch/mips/bcm47xx/nvram.c                    |   15 +++++--
+ arch/mips/bcm47xx/serial.c                   |   13 +++++-
+ arch/mips/bcm47xx/setup.c                    |   32 +++++++++++---
+ arch/mips/bcm47xx/time.c                     |    9 +++-
+ arch/mips/bcm47xx/wgt634u.c                  |   13 ++++--
+ arch/mips/include/asm/mach-bcm47xx/bcm47xx.h |   14 ++++++-
+ arch/mips/include/asm/mach-bcm47xx/gpio.h    |   55 ++++++++++++++++++-------
+ drivers/watchdog/bcm47xx_wdt.c               |   12 +++++-
+ 9 files changed, 158 insertions(+), 61 deletions(-)
+
+--- a/arch/mips/bcm47xx/gpio.c
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -20,42 +20,54 @@ static DECLARE_BITMAP(gpio_in_use, BCM47
+ 
+ int gpio_request(unsigned gpio, const char *tag)
+ {
+-	if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
+-	    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+-		return -EINVAL;
+-
+-	if (ssb_extif_available(&ssb_bcm47xx.extif) &&
+-	    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+-		return -EINVAL;
+-
+-	if (test_and_set_bit(gpio, gpio_in_use))
+-		return -EBUSY;
+-
+-	return 0;
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
++		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
++			return -EINVAL;
++
++		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
++		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
++			return -EINVAL;
++
++		if (test_and_set_bit(gpio, gpio_in_use))
++			return -EBUSY;
++
++		return 0;
++	}
++	return -EINVAL;
+ }
+ EXPORT_SYMBOL(gpio_request);
+ 
+ void gpio_free(unsigned gpio)
+ {
+-	if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
+-	    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+-		return;
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
++		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
++			return;
++
++		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
++		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
++			return;
+ 
+-	if (ssb_extif_available(&ssb_bcm47xx.extif) &&
+-	    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
++		clear_bit(gpio, gpio_in_use);
+ 		return;
+-
+-	clear_bit(gpio, gpio_in_use);
++	}
+ }
+ EXPORT_SYMBOL(gpio_free);
+ 
+ int gpio_to_irq(unsigned gpio)
+ {
+-	if (ssb_chipco_available(&ssb_bcm47xx.chipco))
+-		return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
+-	else if (ssb_extif_available(&ssb_bcm47xx.extif))
+-		return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
+-	else
+-		return -EINVAL;
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
++			return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
++		else if (ssb_extif_available(&bcm47xx_bus.ssb.extif))
++			return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
++		else
++			return -EINVAL;
++	}
++	return -EINVAL;
+ }
+ EXPORT_SYMBOL_GPL(gpio_to_irq);
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -26,14 +26,21 @@ static char nvram_buf[NVRAM_SPACE];
+ /* Probe for NVRAM header */
+ static void early_nvram_init(void)
+ {
+-	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
++	struct ssb_mipscore *mcore_ssb;
+ 	struct nvram_header *header;
+ 	int i;
+-	u32 base, lim, off;
++	u32 base = 0;
++	u32 lim = 0;
++	u32 off;
+ 	u32 *src, *dst;
+ 
+-	base = mcore->flash_window;
+-	lim = mcore->flash_window_size;
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
++		base = mcore_ssb->flash_window;
++		lim = mcore_ssb->flash_window_size;
++		break;
++	}
+ 
+ 	off = FLASH_MIN;
+ 	while (off <= lim) {
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -23,10 +23,10 @@ static struct platform_device uart8250_d
+ 	},
+ };
+ 
+-static int __init uart8250_init(void)
++static int __init uart8250_init_ssb(void)
+ {
+ 	int i;
+-	struct ssb_mipscore *mcore = &(ssb_bcm47xx.mipscore);
++	struct ssb_mipscore *mcore = &(bcm47xx_bus.ssb.mipscore);
+ 
+ 	memset(&uart8250_data, 0,  sizeof(uart8250_data));
+ 
+@@ -45,6 +45,15 @@ static int __init uart8250_init(void)
+ 	return platform_device_register(&uart8250_device);
+ }
+ 
++static int __init uart8250_init(void)
++{
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		return uart8250_init_ssb();
++	}
++	return -EINVAL;
++}
++
+ module_init(uart8250_init);
+ 
+ MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -35,15 +35,22 @@
+ #include <bcm47xx.h>
+ #include <asm/mach-bcm47xx/nvram.h>
+ 
+-struct ssb_bus ssb_bcm47xx;
+-EXPORT_SYMBOL(ssb_bcm47xx);
++union bcm47xx_bus bcm47xx_bus;
++EXPORT_SYMBOL(bcm47xx_bus);
++
++enum bcm47xx_bus_type bcm47xx_active_bus_type;
++EXPORT_SYMBOL(bcm47xx_active_bus_type);
+ 
+ static void bcm47xx_machine_restart(char *command)
+ {
+ 	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
+ 	local_irq_disable();
+ 	/* Set the watchdog timer to reset immediately */
+-	ssb_watchdog_timer_set(&ssb_bcm47xx, 1);
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
++		break;
++	}
+ 	while (1)
+ 		cpu_relax();
+ }
+@@ -52,7 +59,11 @@ static void bcm47xx_machine_halt(void)
+ {
+ 	/* Disable interrupts and watchdog and spin forever */
+ 	local_irq_disable();
+-	ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
++		break;
++	}
+ 	while (1)
+ 		cpu_relax();
+ }
+@@ -247,7 +258,7 @@ static int bcm47xx_get_invariants(struct
+ 	return 0;
+ }
+ 
+-void __init plat_mem_setup(void)
++static void __init bcm47xx_register_ssb(void)
+ {
+ 	int err;
+ 	char buf[100];
+@@ -258,12 +269,12 @@ void __init plat_mem_setup(void)
+ 		printk(KERN_WARNING "bcm47xx: someone else already registered"
+ 			" a ssb SPROM callback handler (err %d)\n", err);
+ 
+-	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
++	err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
+ 				      bcm47xx_get_invariants);
+ 	if (err)
+ 		panic("Failed to initialize SSB bus (err %d)\n", err);
+ 
+-	mcore = &ssb_bcm47xx.mipscore;
++	mcore = &bcm47xx_bus.ssb.mipscore;
+ 	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ 		if (strstr(buf, "console=ttyS1")) {
+ 			struct ssb_serial_port port;
+@@ -276,6 +287,14 @@ void __init plat_mem_setup(void)
+ 			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ 		}
+ 	}
++}
++
++void __init plat_mem_setup(void)
++{
++	struct cpuinfo_mips *c = &current_cpu_data;
++
++	bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
++	bcm47xx_register_ssb();
+ 
+ 	_machine_restart = bcm47xx_machine_restart;
+ 	_machine_halt = bcm47xx_machine_halt;
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -30,7 +30,7 @@
+ 
+ void __init plat_time_init(void)
+ {
+-	unsigned long hz;
++	unsigned long hz = 0;
+ 
+ 	/*
+ 	 * Use deterministic values for initial counter interrupt
+@@ -39,7 +39,12 @@ void __init plat_time_init(void)
+ 	write_c0_count(0);
+ 	write_c0_compare(0xffff);
+ 
+-	hz = ssb_cpu_clock(&ssb_bcm47xx.mipscore) / 2;
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
++		break;
++	}
++
+ 	if (!hz)
+ 		hz = 100000000;
+ 
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ b/arch/mips/bcm47xx/wgt634u.c
+@@ -108,7 +108,7 @@ static irqreturn_t gpio_interrupt(int ir
+ 
+ 	/* Interrupts are shared, check if the current one is
+ 	   a GPIO interrupt. */
+-	if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
++	if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
+ 				   SSB_CHIPCO_IRQ_GPIO))
+ 		return IRQ_NONE;
+ 
+@@ -133,21 +133,24 @@ static int __init wgt634u_init(void)
+ 	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
+ 	 */
+ 
+-	u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
++	if (bcm47xx_active_bus_type != BCM47XX_BUS_TYPE_SSB)
++		return -ENODEV;
++
++	u8 *et0mac = bcm47xx_bus.ssb.sprom.et0mac;
+ 
+ 	if (et0mac[0] == 0x00 &&
+ 	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
+ 	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
+-		struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
++		struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
+ 
+ 		printk(KERN_INFO "WGT634U machine detected.\n");
+ 
+ 		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+ 				 gpio_interrupt, IRQF_SHARED,
+-				 "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
++				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
+ 			gpio_direction_input(WGT634U_GPIO_RESET);
+ 			gpio_intmask(WGT634U_GPIO_RESET, 1);
+-			ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
++			ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
+ 					    SSB_CHIPCO_IRQ_GPIO,
+ 					    SSB_CHIPCO_IRQ_GPIO);
+ 		}
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+@@ -19,7 +19,17 @@
+ #ifndef __ASM_BCM47XX_H
+ #define __ASM_BCM47XX_H
+ 
+-/* SSB bus */
+-extern struct ssb_bus ssb_bcm47xx;
++#include <linux/ssb/ssb.h>
++
++enum bcm47xx_bus_type {
++	BCM47XX_BUS_TYPE_SSB,
++};
++
++union bcm47xx_bus {
++	struct ssb_bus ssb;
++};
++
++extern union bcm47xx_bus bcm47xx_bus;
++extern enum bcm47xx_bus_type bcm47xx_active_bus_type;
+ 
+ #endif /* __ASM_BCM47XX_H */
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -21,41 +21,66 @@ extern int gpio_to_irq(unsigned gpio);
+ 
+ static inline int gpio_get_value(unsigned gpio)
+ {
+-	return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio);
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
++	}
++	return -EINVAL;
+ }
+ 
+ static inline void gpio_set_value(unsigned gpio, int value)
+ {
+-	ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
++			     value ? 1 << gpio : 0);
++	}
+ }
+ 
+ static inline int gpio_direction_input(unsigned gpio)
+ {
+-	ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0);
+-	return 0;
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
++		return 0;
++	}
++	return -EINVAL;
+ }
+ 
+ static inline int gpio_direction_output(unsigned gpio, int value)
+ {
+-	/* first set the gpio out value */
+-	ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
+-	/* then set the gpio mode */
+-	ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio);
+-	return 0;
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		/* first set the gpio out value */
++		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
++			     value ? 1 << gpio : 0);
++		/* then set the gpio mode */
++		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
++		return 0;
++	}
++	return -EINVAL;
+ }
+ 
+ static inline int gpio_intmask(unsigned gpio, int value)
+ {
+-	ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio,
+-			 value ? 1 << gpio : 0);
+-	return 0;
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
++				 value ? 1 << gpio : 0);
++		return 0;
++	}
++	return -EINVAL;
+ }
+ 
+ static inline int gpio_polarity(unsigned gpio, int value)
+ {
+-	ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio,
+-			  value ? 1 << gpio : 0);
+-	return 0;
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
++				  value ? 1 << gpio : 0);
++		return 0;
++	}
++	return -EINVAL;
+ }
+ 
+ 
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -54,12 +54,20 @@ static atomic_t ticks;
+ static inline void bcm47xx_wdt_hw_start(void)
+ {
+ 	/* this is 2,5s on 100Mhz clock  and 2s on 133 Mhz */
+-	ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
++		break;
++	}
+ }
+ 
+ static inline int bcm47xx_wdt_hw_stop(void)
+ {
+-	return ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
++	switch (bcm47xx_active_bus_type) {
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
++	}
++	return -EINVAL;
+ }
+ 
+ static void bcm47xx_timer_tick(unsigned long unused)
diff --git a/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch b/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch
new file mode 100644
index 0000000000..cfb19e065d
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch
@@ -0,0 +1,395 @@
+From 82d03f33ba3e41511e56bd6ae5ae93b3b1bd0b63 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 22 Jun 2011 22:16:35 +0200
+Subject: [PATCH 11/14] bcm47xx: make it possible to build bcm47xx without ssb.
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig                            |    8 +-------
+ arch/mips/bcm47xx/Kconfig                    |   18 ++++++++++++++++++
+ arch/mips/bcm47xx/Makefile                   |    3 ++-
+ arch/mips/bcm47xx/gpio.c                     |    6 ++++++
+ arch/mips/bcm47xx/nvram.c                    |    4 ++++
+ arch/mips/bcm47xx/serial.c                   |    4 ++++
+ arch/mips/bcm47xx/setup.c                    |    8 ++++++++
+ arch/mips/bcm47xx/time.c                     |    2 ++
+ arch/mips/include/asm/mach-bcm47xx/bcm47xx.h |    4 ++++
+ arch/mips/include/asm/mach-bcm47xx/gpio.h    |   12 ++++++++++++
+ arch/mips/pci/pci-bcm47xx.c                  |    6 ++++++
+ drivers/watchdog/bcm47xx_wdt.c               |    4 ++++
+ 12 files changed, 71 insertions(+), 8 deletions(-)
+ create mode 100644 arch/mips/bcm47xx/Kconfig
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -91,15 +91,8 @@ config BCM47XX
+ 	select DMA_NONCOHERENT
+ 	select HW_HAS_PCI
+ 	select IRQ_CPU
+-	select SYS_HAS_CPU_MIPS32_R1
+ 	select SYS_SUPPORTS_32BIT_KERNEL
+ 	select SYS_SUPPORTS_LITTLE_ENDIAN
+-	select SSB
+-	select SSB_DRIVER_MIPS
+-	select SSB_DRIVER_EXTIF
+-	select SSB_EMBEDDED
+-	select SSB_B43_PCI_BRIDGE if PCI
+-	select SSB_PCICORE_HOSTMODE if PCI
+ 	select GENERIC_GPIO
+ 	select SYS_HAS_EARLY_PRINTK
+ 	select CFE
+@@ -785,6 +778,7 @@ endchoice
+ 
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/ath79/Kconfig"
++source "arch/mips/bcm47xx/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+ source "arch/mips/jz4740/Kconfig"
+--- /dev/null
++++ b/arch/mips/bcm47xx/Kconfig
+@@ -0,0 +1,18 @@
++if BCM47XX
++
++config BCM47XX_SSB
++	bool "SSB Support for Broadcom BCM47XX"
++	select SYS_HAS_CPU_MIPS32_R1
++	select SSB
++	select SSB_DRIVER_MIPS
++	select SSB_DRIVER_EXTIF
++	select SSB_EMBEDDED
++	select SSB_B43_PCI_BRIDGE if PCI
++	select SSB_PCICORE_HOSTMODE if PCI
++	default y
++	help
++	 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support bus.
++
++	 This will generate an image with support for SSB and MIPS32 R2 instruction set.
++
++endif
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -3,4 +3,5 @@
+ # under Linux.
+ #
+ 
+-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
++obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
++obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
+--- a/arch/mips/bcm47xx/gpio.c
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -21,6 +21,7 @@ static DECLARE_BITMAP(gpio_in_use, BCM47
+ int gpio_request(unsigned gpio, const char *tag)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+ 		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+@@ -34,6 +35,7 @@ int gpio_request(unsigned gpio, const ch
+ 			return -EBUSY;
+ 
+ 		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -42,6 +44,7 @@ EXPORT_SYMBOL(gpio_request);
+ void gpio_free(unsigned gpio)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+ 		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+@@ -53,6 +56,7 @@ void gpio_free(unsigned gpio)
+ 
+ 		clear_bit(gpio, gpio_in_use);
+ 		return;
++#endif
+ 	}
+ }
+ EXPORT_SYMBOL(gpio_free);
+@@ -60,6 +64,7 @@ EXPORT_SYMBOL(gpio_free);
+ int gpio_to_irq(unsigned gpio)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
+ 			return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
+@@ -67,6 +72,7 @@ int gpio_to_irq(unsigned gpio)
+ 			return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
+ 		else
+ 			return -EINVAL;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -26,7 +26,9 @@ static char nvram_buf[NVRAM_SPACE];
+ /* Probe for NVRAM header */
+ static void early_nvram_init(void)
+ {
++#ifdef CONFIG_BCM47XX_SSB
+ 	struct ssb_mipscore *mcore_ssb;
++#endif
+ 	struct nvram_header *header;
+ 	int i;
+ 	u32 base = 0;
+@@ -35,11 +37,13 @@ static void early_nvram_init(void)
+ 	u32 *src, *dst;
+ 
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
+ 		base = mcore_ssb->flash_window;
+ 		lim = mcore_ssb->flash_window_size;
+ 		break;
++#endif
+ 	}
+ 
+ 	off = FLASH_MIN;
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -23,6 +23,7 @@ static struct platform_device uart8250_d
+ 	},
+ };
+ 
++#ifdef CONFIG_BCM47XX_SSB
+ static int __init uart8250_init_ssb(void)
+ {
+ 	int i;
+@@ -44,12 +45,15 @@ static int __init uart8250_init_ssb(void
+ 	}
+ 	return platform_device_register(&uart8250_device);
+ }
++#endif
+ 
+ static int __init uart8250_init(void)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		return uart8250_init_ssb();
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -47,9 +47,11 @@ static void bcm47xx_machine_restart(char
+ 	local_irq_disable();
+ 	/* Set the watchdog timer to reset immediately */
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ 		break;
++#endif
+ 	}
+ 	while (1)
+ 		cpu_relax();
+@@ -60,14 +62,17 @@ static void bcm47xx_machine_halt(void)
+ 	/* Disable interrupts and watchdog and spin forever */
+ 	local_irq_disable();
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+ 		break;
++#endif
+ 	}
+ 	while (1)
+ 		cpu_relax();
+ }
+ 
++#ifdef CONFIG_BCM47XX_SSB
+ #define READ_FROM_NVRAM(_outvar, name, buf) \
+ 	if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
+ 		sprom->_outvar = simple_strtoul(buf, NULL, 0);
+@@ -288,13 +293,16 @@ static void __init bcm47xx_register_ssb(
+ 		}
+ 	}
+ }
++#endif
+ 
+ void __init plat_mem_setup(void)
+ {
+ 	struct cpuinfo_mips *c = &current_cpu_data;
+ 
++#ifdef CONFIG_BCM47XX_SSB
+ 	bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
+ 	bcm47xx_register_ssb();
++#endif
+ 
+ 	_machine_restart = bcm47xx_machine_restart;
+ 	_machine_halt = bcm47xx_machine_halt;
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -40,9 +40,11 @@ void __init plat_time_init(void)
+ 	write_c0_compare(0xffff);
+ 
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
+ 		break;
++#endif
+ 	}
+ 
+ 	if (!hz)
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+@@ -22,11 +22,15 @@
+ #include <linux/ssb/ssb.h>
+ 
+ enum bcm47xx_bus_type {
++#ifdef CONFIG_BCM47XX_SSB
+ 	BCM47XX_BUS_TYPE_SSB,
++#endif
+ };
+ 
+ union bcm47xx_bus {
++#ifdef CONFIG_BCM47XX_SSB
+ 	struct ssb_bus ssb;
++#endif
+ };
+ 
+ extern union bcm47xx_bus bcm47xx_bus;
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -22,8 +22,10 @@ extern int gpio_to_irq(unsigned gpio);
+ static inline int gpio_get_value(unsigned gpio)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -31,18 +33,22 @@ static inline int gpio_get_value(unsigne
+ static inline void gpio_set_value(unsigned gpio, int value)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+ 			     value ? 1 << gpio : 0);
++#endif
+ 	}
+ }
+ 
+ static inline int gpio_direction_input(unsigned gpio)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
+ 		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -50,6 +56,7 @@ static inline int gpio_direction_input(u
+ static inline int gpio_direction_output(unsigned gpio, int value)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		/* first set the gpio out value */
+ 		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+@@ -57,6 +64,7 @@ static inline int gpio_direction_output(
+ 		/* then set the gpio mode */
+ 		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
+ 		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -64,10 +72,12 @@ static inline int gpio_direction_output(
+ static inline int gpio_intmask(unsigned gpio, int value)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
+ 				 value ? 1 << gpio : 0);
+ 		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -75,10 +85,12 @@ static inline int gpio_intmask(unsigned
+ static inline int gpio_polarity(unsigned gpio, int value)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
+ 				  value ? 1 << gpio : 0);
+ 		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+--- a/arch/mips/pci/pci-bcm47xx.c
++++ b/arch/mips/pci/pci-bcm47xx.c
+@@ -25,6 +25,7 @@
+ #include <linux/types.h>
+ #include <linux/pci.h>
+ #include <linux/ssb/ssb.h>
++#include <bcm47xx.h>
+ 
+ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+ {
+@@ -33,9 +34,13 @@ int __init pcibios_map_irq(const struct
+ 
+ int pcibios_plat_dev_init(struct pci_dev *dev)
+ {
++#ifdef CONFIG_BCM47XX_SSB
+ 	int res;
+ 	u8 slot, pin;
+ 
++	if (bcm47xx_active_bus_type !=  BCM47XX_BUS_TYPE_SSB)
++		return 0;
++
+ 	res = ssb_pcibios_plat_dev_init(dev);
+ 	if (res < 0) {
+ 		printk(KERN_ALERT "PCI: Failed to init device %s\n",
+@@ -55,5 +60,6 @@ int pcibios_plat_dev_init(struct pci_dev
+ 	}
+ 
+ 	dev->irq = res;
++#endif
+ 	return 0;
+ }
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -55,17 +55,21 @@ static inline void bcm47xx_wdt_hw_start(
+ {
+ 	/* this is 2,5s on 100Mhz clock  and 2s on 133 Mhz */
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
+ 		break;
++#endif
+ 	}
+ }
+ 
+ static inline int bcm47xx_wdt_hw_stop(void)
+ {
+ 	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
++#endif
+ 	}
+ 	return -EINVAL;
+ }
diff --git a/target/linux/brcm47xx/patches-3.0/0012-bcm47xx-add-support-for-bcma-bus.patch b/target/linux/brcm47xx/patches-3.0/0012-bcm47xx-add-support-for-bcma-bus.patch
new file mode 100644
index 0000000000..a800f4d68c
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0012-bcm47xx-add-support-for-bcma-bus.patch
@@ -0,0 +1,410 @@
+From 0b7b4817579b5b283e48b96de24b7b2c1a861644 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:37 +0200
+Subject: [PATCH 12/14] bcm47xx: add support for bcma bus
+
+This patch add support for the bcma bus. Broadcom uses only Mips 74K
+CPUs on the new SoC and on the old ons using ssb bus there are no Mips
+74K CPUs.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/Kconfig                    |   13 ++++++
+ arch/mips/bcm47xx/gpio.c                     |   22 +++++++++++
+ arch/mips/bcm47xx/nvram.c                    |   10 +++++
+ arch/mips/bcm47xx/serial.c                   |   29 ++++++++++++++
+ arch/mips/bcm47xx/setup.c                    |   53 +++++++++++++++++++++++++-
+ arch/mips/bcm47xx/time.c                     |    5 ++
+ arch/mips/include/asm/mach-bcm47xx/bcm47xx.h |    8 ++++
+ arch/mips/include/asm/mach-bcm47xx/gpio.h    |   41 ++++++++++++++++++++
+ drivers/watchdog/bcm47xx_wdt.c               |   11 +++++
+ 9 files changed, 190 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm47xx/Kconfig
++++ b/arch/mips/bcm47xx/Kconfig
+@@ -15,4 +15,17 @@ config BCM47XX_SSB
+ 
+ 	 This will generate an image with support for SSB and MIPS32 R2 instruction set.
+ 
++config BCM47XX_BCMA
++	bool "SSB Support for Broadcom BCM47XX"
++	select SYS_HAS_CPU_MIPS32_R2
++	select BCMA
++	select BCMA_HOST_SOC
++	select BCMA_DRIVER_MIPS
++	select BCMA_DRIVER_PCI_HOSTMODE if PCI
++	default y
++	help
++	 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
++
++	 This will generate an image with support for BCMA and MIPS32 R2 instruction set.
++
+ endif
+--- a/arch/mips/bcm47xx/gpio.c
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -36,6 +36,16 @@ int gpio_request(unsigned gpio, const ch
+ 
+ 		return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		if ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)
++			return -EINVAL;
++
++		if (test_and_set_bit(gpio, gpio_in_use))
++			return -EBUSY;
++
++		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -57,6 +67,14 @@ void gpio_free(unsigned gpio)
+ 		clear_bit(gpio, gpio_in_use);
+ 		return;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		if ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)
++			return;
++
++		clear_bit(gpio, gpio_in_use);
++		return;
++#endif
+ 	}
+ }
+ EXPORT_SYMBOL(gpio_free);
+@@ -73,6 +91,10 @@ int gpio_to_irq(unsigned gpio)
+ 		else
+ 			return -EINVAL;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -29,6 +29,9 @@ static void early_nvram_init(void)
+ #ifdef CONFIG_BCM47XX_SSB
+ 	struct ssb_mipscore *mcore_ssb;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	struct bcma_drv_mips *mcore_bcma;
++#endif
+ 	struct nvram_header *header;
+ 	int i;
+ 	u32 base = 0;
+@@ -44,6 +47,13 @@ static void early_nvram_init(void)
+ 		lim = mcore_ssb->flash_window_size;
+ 		break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		mcore_bcma = &bcm47xx_bus.bcma.bus.drv_mips;
++		base = mcore_bcma->flash_window;
++		lim = mcore_bcma->flash_window_size;
++		break;
++#endif
+ 	}
+ 
+ 	off = FLASH_MIN;
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -47,6 +47,31 @@ static int __init uart8250_init_ssb(void
+ }
+ #endif
+ 
++#ifdef CONFIG_BCM47XX_BCMA
++static int __init uart8250_init_bcma(void)
++{
++	int i;
++	struct bcma_drv_mips *mcore = &(bcm47xx_bus.bcma.bus.drv_mips);
++
++	memset(&uart8250_data, 0,  sizeof(uart8250_data));
++
++	for (i = 0; i < mcore->nr_serial_ports; i++) {
++		struct plat_serial8250_port *p = &(uart8250_data[i]);
++		struct bcma_drv_mips_serial_port *bcma_port;
++		bcma_port = &(mcore->serial_ports[i]);
++
++		p->mapbase = (unsigned int) bcma_port->regs;
++		p->membase = (void *) bcma_port->regs;
++		p->irq = bcma_port->irq + 2;
++		p->uartclk = bcma_port->baud_base;
++		p->regshift = bcma_port->reg_shift;
++		p->iotype = UPIO_MEM;
++		p->flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++	}
++	return platform_device_register(&uart8250_device);
++}
++#endif
++
+ static int __init uart8250_init(void)
+ {
+ 	switch (bcm47xx_active_bus_type) {
+@@ -54,6 +79,10 @@ static int __init uart8250_init(void)
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		return uart8250_init_ssb();
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return uart8250_init_bcma();
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -29,6 +29,7 @@
+ #include <linux/types.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
++#include <linux/bcma/bcma_soc.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -52,6 +53,11 @@ static void bcm47xx_machine_restart(char
+ 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ 		break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
++		break;
++#endif
+ 	}
+ 	while (1)
+ 		cpu_relax();
+@@ -67,6 +73,11 @@ static void bcm47xx_machine_halt(void)
+ 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+ 		break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
++		break;
++#endif
+ 	}
+ 	while (1)
+ 		cpu_relax();
+@@ -295,16 +306,54 @@ static void __init bcm47xx_register_ssb(
+ }
+ #endif
+ 
++#ifdef CONFIG_BCM47XX_BCMA
++static void __init bcm47xx_register_bcma(void)
++{
++	int err;
++
++	err = bcma_host_soc_register(&bcm47xx_bus.bcma);
++	if (err)
++		panic("Failed to initialize BCMA bus (err %d)\n", err);
++}
++#endif
++
+ void __init plat_mem_setup(void)
+ {
+ 	struct cpuinfo_mips *c = &current_cpu_data;
+ 
++	if (c->cputype == CPU_74K) {
++		printk(KERN_INFO "bcm47xx: using bcma bus\n");
++#ifdef CONFIG_BCM47XX_BCMA
++		bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_BCMA;
++		bcm47xx_register_bcma();
++#endif
++	} else {
++		printk(KERN_INFO "bcm47xx: using ssb bus\n");
+ #ifdef CONFIG_BCM47XX_SSB
+-	bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
+-	bcm47xx_register_ssb();
++		bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
++		bcm47xx_register_ssb();
+ #endif
++	}
+ 
+ 	_machine_restart = bcm47xx_machine_restart;
+ 	_machine_halt = bcm47xx_machine_halt;
+ 	pm_power_off = bcm47xx_machine_halt;
+ }
++
++static int __init bcm47xx_register_bus_complete(void)
++{
++	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		/* Nothing to do */
++		break;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		bcma_bus_register(&bcm47xx_bus.bcma.bus);
++		break;
++#endif
++	}
++	return 0;
++}
++device_initcall(bcm47xx_register_bus_complete);
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -45,6 +45,11 @@ void __init plat_time_init(void)
+ 		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
+ 		break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
++		break;
++#endif
+ 	}
+ 
+ 	if (!hz)
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+@@ -20,17 +20,25 @@
+ #define __ASM_BCM47XX_H
+ 
+ #include <linux/ssb/ssb.h>
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_soc.h>
+ 
+ enum bcm47xx_bus_type {
+ #ifdef CONFIG_BCM47XX_SSB
+ 	BCM47XX_BUS_TYPE_SSB,
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	BCM47XX_BUS_TYPE_BCMA,
++#endif
+ };
+ 
+ union bcm47xx_bus {
+ #ifdef CONFIG_BCM47XX_SSB
+ 	struct ssb_bus ssb;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	struct bcma_soc bcma;
++#endif
+ };
+ 
+ extern union bcm47xx_bus bcm47xx_bus;
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -10,6 +10,7 @@
+ #define __BCM47XX_GPIO_H
+ 
+ #include <linux/ssb/ssb_embedded.h>
++#include <linux/bcma/bcma.h>
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+ 
+ #define BCM47XX_EXTIF_GPIO_LINES	5
+@@ -26,6 +27,11 @@ static inline int gpio_get_value(unsigne
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
++					   1 << gpio);
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -37,6 +43,13 @@ static inline void gpio_set_value(unsign
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+ 			     value ? 1 << gpio : 0);
++		return;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
++				     value ? 1 << gpio : 0);
++		return;
+ #endif
+ 	}
+ }
+@@ -49,6 +62,12 @@ static inline int gpio_direction_input(u
+ 		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
+ 		return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
++				       0);
++		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -65,6 +84,16 @@ static inline int gpio_direction_output(
+ 		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
+ 		return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		/* first set the gpio out value */
++		bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
++				     value ? 1 << gpio : 0);
++		/* then set the gpio mode */
++		bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
++				       1 << gpio);
++		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -78,6 +107,12 @@ static inline int gpio_intmask(unsigned
+ 				 value ? 1 << gpio : 0);
+ 		return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
++					 1 << gpio, value ? 1 << gpio : 0);
++		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+@@ -91,6 +126,12 @@ static inline int gpio_polarity(unsigned
+ 				  value ? 1 << gpio : 0);
+ 		return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
++					  1 << gpio, value ? 1 << gpio : 0);
++		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -60,6 +60,12 @@ static inline void bcm47xx_wdt_hw_start(
+ 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
+ 		break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
++					       0xfffffff);
++		break;
++#endif
+ 	}
+ }
+ 
+@@ -70,6 +76,11 @@ static inline int bcm47xx_wdt_hw_stop(vo
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
++		return 0;
++#endif
+ 	}
+ 	return -EINVAL;
+ }
diff --git a/target/linux/brcm47xx/patches-3.0/0013-bcm47xx-fix-irq-assignment-for-new-SoCs.patch b/target/linux/brcm47xx/patches-3.0/0013-bcm47xx-fix-irq-assignment-for-new-SoCs.patch
new file mode 100644
index 0000000000..a40e726956
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0013-bcm47xx-fix-irq-assignment-for-new-SoCs.patch
@@ -0,0 +1,37 @@
+From 360eb82fd303ac24590a1b99ad1866162f6b0171 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:38 +0200
+Subject: [PATCH 13/14] bcm47xx: fix irq assignment for new SoCs.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/irq.c |   12 ++++++++++++
+ 1 files changed, 12 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm47xx/irq.c
++++ b/arch/mips/bcm47xx/irq.c
+@@ -26,6 +26,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
+ #include <asm/irq_cpu.h>
++#include <bcm47xx.h>
+ 
+ void plat_irq_dispatch(void)
+ {
+@@ -51,5 +52,16 @@ void plat_irq_dispatch(void)
+ 
+ void __init arch_init_irq(void)
+ {
++#ifdef CONFIG_BCM47XX_BCMA
++	if (bcm47xx_active_bus_type == BCM47XX_BUS_TYPE_BCMA) {
++		bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core,
++			     BCMA_MIPS_MIPS74K_INTMASK(5), 1 << 31);
++		/*
++		 * the kernel reads the timer irq from some register and thinks
++		 * it's #5, but we offset it by 2 and route to #7
++		 */
++		cp0_compare_irq = 7;
++	}
++#endif
+ 	mips_cpu_irq_init();
+ }
diff --git a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
index 419a4f6f13..824dd09c09 100644
--- a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
+++ b/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
@@ -15,16 +15,16 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 
 --- a/arch/mips/bcm47xx/setup.c
 +++ b/arch/mips/bcm47xx/setup.c
-@@ -29,6 +29,8 @@
- #include <linux/types.h>
+@@ -30,6 +30,8 @@
  #include <linux/ssb/ssb.h>
  #include <linux/ssb/ssb_embedded.h>
+ #include <linux/bcma/bcma_soc.h>
 +#include <linux/serial.h>
 +#include <linux/serial_8250.h>
  #include <asm/bootinfo.h>
  #include <asm/reboot.h>
  #include <asm/time.h>
-@@ -247,6 +249,31 @@ static int bcm47xx_get_invariants(struct
+@@ -274,6 +276,31 @@ static int bcm47xx_get_invariants(struct
  	return 0;
  }
  
@@ -53,17 +53,17 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +}
 +#endif
 +
- void __init plat_mem_setup(void)
+ static void __init bcm47xx_register_ssb(void)
  {
  	int err;
-@@ -277,6 +304,10 @@ void __init plat_mem_setup(void)
+@@ -303,6 +330,10 @@ static void __init bcm47xx_register_ssb(
+ 			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
  		}
  	}
- 
++
 +#ifdef CONFIG_SERIAL_8250
 +	bcm47xx_early_serial_setup(mcore);
 +#endif
-+
- 	_machine_restart = bcm47xx_machine_restart;
- 	_machine_halt = bcm47xx_machine_halt;
- 	pm_power_off = bcm47xx_machine_halt;
+ }
+ #endif
+ 
diff --git a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
index 2b34ec5c02..69d4eefa85 100644
--- a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
+++ b/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
@@ -16,9 +16,9 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -101,7 +101,6 @@ config BCM47XX
- 	select SSB_B43_PCI_BRIDGE if PCI
- 	select SSB_PCICORE_HOSTMODE if PCI
+@@ -94,7 +94,6 @@ config BCM47XX
+ 	select SYS_SUPPORTS_32BIT_KERNEL
+ 	select SYS_SUPPORTS_LITTLE_ENDIAN
  	select GENERIC_GPIO
 -	select SYS_HAS_EARLY_PRINTK
  	select CFE
diff --git a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch b/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
index 32593908d4..2bc7718c34 100644
--- a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
+++ b/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
@@ -1,7 +1,7 @@
 --- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
 +++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -58,6 +58,10 @@ static inline int gpio_polarity(unsigned
- 	return 0;
+@@ -136,6 +136,10 @@ static inline int gpio_polarity(unsigned
+ 	return -EINVAL;
  }
  
 +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
diff --git a/target/linux/brcm47xx/patches-3.0/250-bcma-flash.patch b/target/linux/brcm47xx/patches-3.0/250-bcma-flash.patch
new file mode 100644
index 0000000000..2b2f011066
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/250-bcma-flash.patch
@@ -0,0 +1,78 @@
+--- a/drivers/mtd/maps/bcm47xx-flash.c
++++ b/drivers/mtd/maps/bcm47xx-flash.c
+@@ -46,11 +46,9 @@
+ #include <linux/mtd/map.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/crc32.h>
+-#ifdef CONFIG_SSB
+-#include <linux/ssb/ssb.h>
+-#endif
+ #include <asm/io.h>
+ #include <asm/mach-bcm47xx/nvram.h>
++#include <asm/mach-bcm47xx/bcm47xx.h>
+ #include <asm/fw/cfe/cfe_api.h>
+ 
+ 
+@@ -90,9 +88,6 @@ struct trx_header {
+ #define ROUTER_NETGEAR_WNR3500L        4
+ #define ROUTER_SIMPLETECH_SIMPLESHARE  5
+ 
+-#ifdef CONFIG_SSB
+-extern struct ssb_bus ssb_bcm47xx;
+-#endif
+ static struct mtd_info *bcm47xx_mtd;
+ 
+ static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+@@ -552,27 +547,42 @@ init_mtd_partitions(struct mtd_info *mtd
+ 
+ int __init init_bcm47xx_map(void)
+ {
+-#ifdef CONFIG_SSB
+-	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
++#ifdef CONFIG_BCM47XX_SSB
++	struct ssb_mipscore *mcore_ssb;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	struct bcma_drv_mips *mcore_bcma;
+ #endif
+ 	size_t size;
+ 	int ret = 0;
++	u32 window = 0;
++	u32 window_size = 0;
+ 	struct mtd_partition *parts;
+ 	int i;
+ 
+-#ifdef CONFIG_SSB
+-	u32 window = mcore->flash_window;
+-	u32 window_size = mcore->flash_window_size;
++	switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
++		window = mcore_ssb->flash_window;
++		window_size = mcore_ssb->flash_window_size;
++		bcm47xx_map.bankwidth = mcore_ssb->flash_buswidth;
++		break;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		mcore_bcma = &bcm47xx_bus.bcma.bus.drv_mips;
++		window = mcore_bcma->flash_window;
++		window_size = mcore_bcma->flash_window_size;
++		bcm47xx_map.bankwidth = mcore_bcma->flash_buswidth;
++		break;
++#endif
++	}
+ 
+ 	printk("flash init: 0x%08x 0x%08x\n", window, window_size);
+ 	bcm47xx_map.phys = window;
+ 	bcm47xx_map.size = window_size;
+-	bcm47xx_map.bankwidth = mcore->flash_buswidth;
+ 	bcm47xx_map.virt = ioremap_nocache(window, window_size);
+-#else
+-	printk("flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE);
+-	bcm47xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
+-#endif
+ 
+ 	if (!bcm47xx_map.virt) {
+ 		printk("Failed to ioremap\n");
diff --git a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
index 14b408842d..8e5e88b6ba 100644
--- a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
+++ b/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm47xx/nvram.c
 +++ b/arch/mips/bcm47xx/nvram.c
-@@ -93,3 +93,30 @@ int nvram_getenv(char *name, char *val,
+@@ -114,3 +114,30 @@ int nvram_getenv(char *name, char *val,
  	return NVRAM_ERR_ENVNOTFOUND;
  }
  EXPORT_SYMBOL(nvram_getenv);
@@ -33,10 +33,10 @@
 +EXPORT_SYMBOL(nvram_get);
 --- a/arch/mips/bcm47xx/setup.c
 +++ b/arch/mips/bcm47xx/setup.c
-@@ -312,3 +312,20 @@ void __init plat_mem_setup(void)
- 	_machine_halt = bcm47xx_machine_halt;
- 	pm_power_off = bcm47xx_machine_halt;
+@@ -388,3 +388,20 @@ static int __init bcm47xx_register_bus_c
+ 	return 0;
  }
+ device_initcall(bcm47xx_register_bus_complete);
 +
 +static int __init bcm47xx_register_gpiodev(void)
 +{
diff --git a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
index a0331399d3..a1a9055e7e 100644
--- a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
+++ b/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
@@ -1,14 +1,13 @@
 --- a/arch/mips/bcm47xx/Makefile
 +++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
+@@ -4,4 +4,3 @@
  #
  
--obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+ obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+-obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
 --- a/arch/mips/bcm47xx/wgt634u.c
 +++ /dev/null
-@@ -1,166 +0,0 @@
+@@ -1,169 +0,0 @@
 -/*
 - * This file is subject to the terms and conditions of the GNU General Public
 - * License.  See the file "COPYING" in the main directory of this archive
@@ -119,7 +118,7 @@
 -
 -	/* Interrupts are shared, check if the current one is
 -	   a GPIO interrupt. */
--	if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
+-	if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
 -				   SSB_CHIPCO_IRQ_GPIO))
 -		return IRQ_NONE;
 -
@@ -144,21 +143,24 @@
 -	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
 -	 */
 -
--	u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
+-	if (bcm47xx_active_bus_type != BCM47XX_BUS_TYPE_SSB)
+-		return -ENODEV;
+-
+-	u8 *et0mac = bcm47xx_bus.ssb.sprom.et0mac;
 -
 -	if (et0mac[0] == 0x00 &&
 -	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
 -	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
--		struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+-		struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
 -
 -		printk(KERN_INFO "WGT634U machine detected.\n");
 -
 -		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
 -				 gpio_interrupt, IRQF_SHARED,
--				 "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
+-				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
 -			gpio_direction_input(WGT634U_GPIO_RESET);
 -			gpio_intmask(WGT634U_GPIO_RESET, 1);
--			ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
+-			ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
 -					    SSB_CHIPCO_IRQ_GPIO,
 -					    SSB_CHIPCO_IRQ_GPIO);
 -		}
diff --git a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
index e1bf69f8c8..301c9a421d 100644
--- a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
+++ b/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
@@ -9,8 +9,8 @@ out the configuration than the in kernel cfe config reader.
  # under Linux.
  #
  
--obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
-+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o cfe_env.o
+-obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
++obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o cfe_env.o
 --- /dev/null
 +++ b/arch/mips/bcm47xx/cfe_env.c
 @@ -0,0 +1,229 @@
@@ -254,10 +254,10 @@ out the configuration than the in kernel cfe config reader.
  
  /* Probe for NVRAM header */
  static void early_nvram_init(void)
-@@ -34,6 +36,25 @@ static void early_nvram_init(void)
- 
- 	base = mcore->flash_window;
- 	lim = mcore->flash_window_size;
+@@ -55,6 +57,25 @@ static void early_nvram_init(void)
+ 		break;
+ #endif
+ 	}
 +	cfe_env = 0;
 +
 +	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
@@ -280,7 +280,7 @@ out the configuration than the in kernel cfe config reader.
  
  	off = FLASH_MIN;
  	while (off <= lim) {
-@@ -75,6 +96,12 @@ int nvram_getenv(char *name, char *val,
+@@ -96,6 +117,12 @@ int nvram_getenv(char *name, char *val,
  	if (!nvram_buf[0])
  		early_nvram_init();
  
@@ -293,7 +293,7 @@ out the configuration than the in kernel cfe config reader.
  	/* Look for name=value and return value */
  	var = &nvram_buf[sizeof(struct nvram_header)];
  	end = nvram_buf + sizeof(nvram_buf) - 2;
-@@ -104,6 +131,9 @@ char *nvram_get(const char *name)
+@@ -125,6 +152,9 @@ char *nvram_get(const char *name)
  	if (!nvram_buf[0])
  		early_nvram_init();
  
diff --git a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch b/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
index 6bc2b12eb0..d259dcf160 100644
--- a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
+++ b/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
@@ -8,7 +8,7 @@
  
  static int wdt_time = WDT_DEFAULT_TIME;
  static int nowayout = WATCHDOG_NOWAYOUT;
-@@ -50,11 +51,11 @@ static unsigned long bcm47xx_wdt_busy;
+@@ -50,20 +51,20 @@ static unsigned long bcm47xx_wdt_busy;
  static char expect_release;
  static struct timer_list wdt_timer;
  static atomic_t ticks;
@@ -18,12 +18,22 @@
 +static inline void bcm47xx_wdt_hw_start(u32 ticks)
  {
 -	/* this is 2,5s on 100Mhz clock  and 2s on 133 Mhz */
--	ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
-+ 	ssb_watchdog_timer_set(&ssb_bcm47xx, ticks);
- }
- 
- static inline int bcm47xx_wdt_hw_stop(void)
-@@ -65,33 +66,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
+ 	switch (bcm47xx_active_bus_type) {
+ #ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+-		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
++		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, ticks);
+ 		break;
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ 	case BCM47XX_BUS_TYPE_BCMA:
+ 		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
+-					       0xfffffff);
++					       ticks);
+ 		break;
+ #endif
+ 	}
+@@ -88,33 +89,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
  static void bcm47xx_timer_tick(unsigned long unused)
  {
  	if (!atomic_dec_and_test(&ticks)) {
@@ -70,20 +80,25 @@
  }
  
  static int bcm47xx_wdt_settimeout(int new_time)
-@@ -243,7 +245,15 @@ static int __init bcm47xx_wdt_init(void)
+@@ -266,7 +268,20 @@ static int __init bcm47xx_wdt_init(void)
  	if (bcm47xx_wdt_hw_stop() < 0)
  		return -ENODEV;
  
 -	setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
 +	/* FIXME Other cores */
-+	if(ssb_bcm47xx.chip_id == 0x5354) {
++#ifdef BCM47XX_BUS_TYPE_BCMA
++	if(bcm47xx_active_bus_type == BCM47XX_BUS_TYPE_BCMA &&
++	   bcm47xx_bus.ssb.chip_id == 0x5354) {
 +		/* Slow WDT clock, no pre-scaling */
 +		needs_sw_scale = 0;
 +	} else {
++#endif
 +		/* Fast WDT clock, needs software pre-scaling */
 +		needs_sw_scale = 1;
 +		setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
++#ifdef BCM47XX_BUS_TYPE_BCMA
 +	}
++#endif
  
  	if (bcm47xx_wdt_settimeout(wdt_time)) {
  		bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
diff --git a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
index 518e634010..09415038a0 100644
--- a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
+++ b/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm47xx/setup.c
 +++ b/arch/mips/bcm47xx/setup.c
-@@ -246,6 +246,10 @@ static int bcm47xx_get_invariants(struct
+@@ -273,6 +273,10 @@ static int bcm47xx_get_invariants(struct
  	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
  		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
author	hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>	2011-06-28 22:21:57 +0000
committer	hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>	2011-06-28 22:21:57 +0000
commit	6c4398bc6add362d5b399ba361720cf1afd7176b (patch)
tree	d7387ce02884e192e6b4e330ce901b1a519f7f70
parent	a89d3f1a9b4415a29eb23a7831b2d012f316889c (diff)