ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73

11 files changed, 189 insertions, 1 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index edb8376cdd..652787b3d4 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -66,6 +66,9 @@ get_status_led() {
 	whr-g300n)
 		status_led="whr-g300n:green:router"
 		;;
+	wli-tx4-ag300n)
+		status_led="buffalo:blue:power"
+		;;
 	wl-351)
 		status_led="wl-351:amber:power"
 		;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index a1d4887ecb..55c577e27f 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -60,6 +60,7 @@ case "$FIRMWARE" in
 	wcr-150gn | \
 	whr-g300n | \
 	wl-351 | \
+	wli-tx4-ag300n | \
 	wr512-3gn)
 		rt2x00_eeprom_extract "factory" 0 272
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 60dd716080..834a2a7d90 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -30,6 +30,10 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
 		;;
 
+	wli-tx4-ag300n)
+		ucidef_set_interface_lan "eth0"
+		;;
+
 	rt-n15)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "rtl8366s" "1" "1"
@@ -81,6 +85,11 @@ ramips_setup_macs()
                 lan_mac=$(ramips_get_mac_binary factory 4)
                 wan_mac=$(ramips_get_mac_binary factory 40)
 		;;
+
+	wli-tx4-ag300n)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		;;
+
 	esac
 
 	[ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 4dc10aeb22..d197fcedca 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -107,6 +107,9 @@ ramips_board_name() {
 	*"Sitecom WL-351 v1 002")
 		name="wl-351"
 		;;
+	*"WLI-TX4-AG300N")
+		name="wli-tx4-ag300n"
+		;;
 	*"WZR-AGL300NH")
 		name="wzr-agl300nh"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 03a1e7b100..aebaf3879e 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -27,6 +27,7 @@ platform_check_image() {
 	rt-g32-b1 | \
 	rt-n15 | \
 	v22rw-2x2 | \
+	wli-tx4-ag300n | \
 	whr-g300n)
 		[ "$magic" != "2705" ] && {
 			echo "Invalid image type."
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 712976082b..9e48b5caae 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -15,6 +15,7 @@ enum ramips_mach_type {
 	RAMIPS_MACH_GENERIC,
 	/* RT2880 based machines */
 	RAMIPS_MACH_RT_N15,		/* Asus RT-N15 */
+	RAMIPS_MACH_WLI_TX4_AG300N,	/* Buffalo WLI-TX4-AG300N */
 	RAMIPS_MACH_WZR_AGL300NH,	/* Buffalo WZR-AGL300NH */
 
 	/* RT3050 based machines */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
index 0fc7788302..c30b3ad1d9 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
@@ -7,6 +7,11 @@ config RT288X_MACH_RT_N15
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT288X_MACH_WLI_TX4_AG300N
+	bool "Buffalo WLI-TX4-AG300N board support"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT288X_MACH_WZR_AGL300NH
 	bool "Buffalo WZR-AGL300NH board support"
 	select RALINK_DEV_GPIO_LEDS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
index 103081aaa7..ab707018d2 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
@@ -14,5 +14,5 @@ obj-y	:= irq.o setup.o rt288x.o devices.o clock.o
 obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
 
 obj-$(CONFIG_RT288X_MACH_RT_N15)	+= mach-rt-n15.o
-
+obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
 obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH)	+= mach-wzr-agl300nh.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c
new file mode 100644
index 0000000000..0f200ea298
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c
@@ -0,0 +1,154 @@
+/*
+ *  Buffalo WLI-TX4-AG300N board support
+ *
+ *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/rt288x_regs.h>
+#include <asm/mach-ralink/ramips_eth_platform.h>
+
+#include "devices.h"
+
+#define WLI_TX4_AG300N_GPIO_LED_DIAG		10
+#define WLI_TX4_AG300N_GPIO_LED_POWER		12
+#define WLI_TX4_AG300N_GPIO_LED_SECURITY	13
+
+#define WLI_TX4_AG300N_GPIO_BUTTON_AOSS		0
+#define WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH	8
+#define WLI_TX4_AG300N_GPIO_BUTTON_RESET	9
+
+#define WLI_TX4_AG300N_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wli_tx4_ag300n_partitions[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x030000,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "u-boot-env",
+		.offset	= 0x030000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "factory",
+		.offset	= 0x040000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "kernel",
+		.offset	= 0x050000,
+		.size	= 0x0d0000,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= 0x120000,
+		.size	= 0x2d0000,
+	},
+	{
+		.name	= "user",
+		.offset	= 0x3f0000,
+		.size	= 0x010000,
+	},
+	{
+		.name	= "firmware",
+		.offset	= 0x050000,
+		.size	= 0x3a0000,
+	},
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data wli_tx4_ag300n_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(wli_tx4_ag300n_partitions),
+	.parts		= wli_tx4_ag300n_partitions,
+#endif
+};
+
+static struct gpio_led wli_tx4_ag300n_leds_gpio[] __initdata = {
+	{
+		.name		= "buffalo:blue:power",
+		.gpio		= WLI_TX4_AG300N_GPIO_LED_POWER,
+		.active_low	= 1,
+	},
+	{
+		.name		= "buffalo:red:diag",
+		.gpio		= WLI_TX4_AG300N_GPIO_LED_DIAG,
+		.active_low	= 1,
+	},
+	{
+		.name		= "buffalo:blue:security",
+		.gpio		= WLI_TX4_AG300N_GPIO_LED_SECURITY,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_button wli_tx4_ag300n_gpio_buttons[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= WLI_TX4_AG300N_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "AOSS button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= WLI_TX4_AG300N_GPIO_BUTTON_AOSS,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "Bandwidth switch",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 3,
+		.gpio		= WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH,
+		.active_low	= 0,
+	},
+};
+
+static void __init wli_tx4_ag300n_init(void)
+{
+	rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
+
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(wli_tx4_ag300n_leds_gpio),
+				  wli_tx4_ag300n_leds_gpio);
+	ramips_register_gpio_buttons(-1, WLI_TX4_AG300N_BUTTONS_POLL_INTERVAL,
+				     ARRAY_SIZE(wli_tx4_ag300n_gpio_buttons),
+				     wli_tx4_ag300n_gpio_buttons);
+
+	rt288x_register_flash(0, &wli_tx4_ag300n_flash_data);
+	rt288x_register_wifi();
+	rt288x_register_wdt();
+
+	rt288x_eth_data.speed = SPEED_100;
+	rt288x_eth_data.duplex = DUPLEX_FULL;
+	rt288x_eth_data.tx_fc = 1;
+	rt288x_eth_data.rx_fc = 1;
+	rt288x_register_ethernet();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_WLI_TX4_AG300N, "WLI-TX4-AG300N",
+	     "Buffalo WLI-TX4-AG300N", wli_tx4_ag300n_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 8f4e211255..a2845fd578 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -89,6 +89,10 @@ define BuildFirmware/Buffalo
 	fi; fi
 endef
 
+define BuildFirmware/Buffalo2
+	$(call BuildFirmware/Generic,$(1),$(2),board=$(3),$($(4)),$(5),$(6))
+endef
+
 define BuildFirmware/NW718
 	$(call PatchKernelLzma,$(2),$(3) $($(4)))
 	mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
@@ -284,9 +288,15 @@ define Image/Build/Profile/RTN15
 	$(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
 endef
 
+mtdlayout_wlitx4ag300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2880k(rootfs),64k(user)ro,3712k@0x50000(firmware)
+define Image/Build/Profile/WLITX4AG300N
+	$(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,mtdlayout_wlitx4ag300n,851968,2949120)
+endef
+
 ifeq ($(CONFIG_RALINK_RT288X),y)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/RTN15,$(1))
+	$(call Image/Build/Profile/WLITX4AG300N,$(1))
 endef
 endif
 
diff --git a/target/linux/ramips/rt288x/config-2.6.39 b/target/linux/ramips/rt288x/config-2.6.39
index 3936c066d6..a5fead5827 100644
--- a/target/linux/ramips/rt288x/config-2.6.39
+++ b/target/linux/ramips/rt288x/config-2.6.39
@@ -93,6 +93,7 @@ CONFIG_RALINK_RT288X=y
 # CONFIG_RALINK_RT305X is not set
 CONFIG_RAMIPS_WDT=y
 CONFIG_RT288X_MACH_RT_N15=y
+CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
 CONFIG_RT288X_MACH_WZR_AGL300NH=y
 CONFIG_RTL8366S_PHY=y
 CONFIG_RTL8366_SMI=y