upgrade avr32 to 2.6.27

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13345 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 4 insertions, 16679 deletions

diff --git a/target/linux/avr32/Makefile b/target/linux/avr32/Makefile
index e07cb9aaa6..67524d95f1 100644
--- a/target/linux/avr32/Makefile
+++ b/target/linux/avr32/Makefile
@@ -10,7 +10,7 @@ ARCH:=avr32
 BOARD:=avr32
 BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
-LINUX_VERSION:=2.6.25.20
+LINUX_VERSION:=2.6.27.7
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/avr32/config-default b/target/linux/avr32/config-default
index 8a0692a60e..60a901a3e9 100644
--- a/target/linux/avr32/config-default
+++ b/target/linux/avr32/config-default
@@ -41,6 +41,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GPIO_DEV is not set
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -139,6 +140,7 @@ CONFIG_QUICKLIST=y
 # CONFIG_REALTEK_PHY is not set
 CONFIG_RTC_CLASS=m
 CONFIG_RTC_DRV_AT32AP700X=m
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_DS1307 is not set
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
@@ -148,6 +150,7 @@ CONFIG_RTC_DRV_AT32AP700X=m
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -185,7 +188,6 @@ CONFIG_SPI_MASTER=y
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_THERMAL is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB_ARCH_HAS_HCD is not set
diff --git a/target/linux/avr32/patches/100-git_sync.patch b/target/linux/avr32/patches/100-git_sync.patch
deleted file mode 100644
index 6c9fe1eb66..0000000000
--- a/target/linux/avr32/patches/100-git_sync.patch
+++ /dev/null
@@ -1,16677 +0,0 @@
---- a/Documentation/serial/driver
-+++ b/Documentation/serial/driver
-@@ -186,6 +186,17 @@ hardware.
- 	Locking: port_sem taken.
- 	Interrupts: caller dependent.
- 
-+  flush_buffer(port)
-+	Flush any write buffers, reset any DMA state and stop any
-+	ongoing DMA transfers.
-+
-+	This will be called whenever the port->info->xmit circular
-+	buffer is cleared.
-+
-+	Locking: port->lock taken.
-+	Interrupts: locally disabled.
-+	This call must not sleep
-+
-   set_termios(port,termios,oldtermios)
- 	Change the port parameters, including word length, parity, stop
- 	bits.  Update read_status_mask and ignore_status_mask to indicate
---- a/arch/avr32/Kconfig
-+++ b/arch/avr32/Kconfig
-@@ -47,6 +47,9 @@ config RWSEM_GENERIC_SPINLOCK
- config GENERIC_TIME
- 	def_bool y
- 
-+config GENERIC_CLOCKEVENTS
-+	def_bool y
-+
- config RWSEM_XCHGADD_ALGORITHM
- 	def_bool n
- 
-@@ -70,6 +73,8 @@ source "init/Kconfig"
- 
- menu "System Type and features"
- 
-+source "kernel/time/Kconfig"
-+
- config SUBARCH_AVR32B
- 	bool
- config MMU
-@@ -83,6 +88,7 @@ config PLATFORM_AT32AP
- 	select MMU
- 	select PERFORMANCE_COUNTERS
- 	select HAVE_GPIO_LIB
-+	select GENERIC_ALLOCATOR
- 
- #
- # CPU types
-@@ -117,6 +123,9 @@ endchoice
- if BOARD_ATSTK1000
- source "arch/avr32/boards/atstk1000/Kconfig"
- endif
-+if BOARD_ATNGW100
-+source "arch/avr32/boards/atngw100/Kconfig"
-+endif
- 
- choice
- 	prompt "Boot loader type"
-@@ -142,6 +151,9 @@ config PHYS_OFFSET
- 
- source "kernel/Kconfig.preempt"
- 
-+config QUICKLIST
-+	def_bool y
-+
- config HAVE_ARCH_BOOTMEM_NODE
- 	def_bool n
- 
-@@ -180,6 +192,10 @@ config NMI_DEBUGGING
- 	  be dumped to the console when a Non-Maskable Interrupt
- 	  happens.
- 
-+config DW_DMAC
-+	tristate "Synopsys DesignWare DMA Controller support"
-+	default y if CPU_AT32AP7000
-+
- # FPU emulation goes here
- 
- source "kernel/Kconfig.hz"
-@@ -196,6 +212,11 @@ endmenu
- 
- menu "Power management options"
- 
-+config ARCH_SUSPEND_POSSIBLE
-+	def_bool y
-+
-+source "kernel/power/Kconfig"
-+
- menu "CPU Frequency scaling"
- 
- source "drivers/cpufreq/Kconfig"
---- a/arch/avr32/Makefile
-+++ b/arch/avr32/Makefile
-@@ -32,6 +32,7 @@ core-$(CONFIG_LOADER_U_BOOT)		+= arch/av
- core-y					+= arch/avr32/kernel/
- core-y					+= arch/avr32/mm/
- drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
-+drivers-y				+= arch/avr32/drivers/
- libs-y					+= arch/avr32/lib/
- 
- archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/Kconfig
-@@ -0,0 +1,12 @@
-+# NGW100 customization
-+
-+config BOARD_ATNGW100_I2C_GPIO
-+	bool "Use GPIO for i2c instead of built-in TWI module"
-+	help
-+	  The driver for the built-in TWI module has been plagued by
-+	  various problems, while the i2c-gpio driver is based on the
-+	  trusty old i2c-algo-bit bitbanging engine, making it work
-+	  on pretty much any setup.
-+
-+	  Choose 'Y' here if you're having i2c-related problems and
-+	  want to rule out the i2c bus driver.
---- a/arch/avr32/boards/atngw100/setup.c
-+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -25,6 +25,13 @@
- #include <asm/arch/init.h>
- #include <asm/arch/portmux.h>
- 
-+/* Oscillator frequencies. These are board-specific */
-+unsigned long at32_board_osc_rates[3] = {
-+	[0] = 32768,	/* 32.768 kHz on RTC osc */
-+	[1] = 20000000,	/* 20 MHz on osc0 */
-+	[2] = 12000000,	/* 12 MHz on osc1 */
-+};
-+
- /* Initialized by bootloader-specific startup code. */
- struct tag *bootloader_tags __initdata;
- 
-@@ -37,11 +44,16 @@ static struct eth_platform_data __initda
- static struct spi_board_info spi0_board_info[] __initdata = {
- 	{
- 		.modalias	= "mtd_dataflash",
--		.max_speed_hz	= 10000000,
-+		.max_speed_hz	= 8000000,
- 		.chip_select	= 0,
- 	},
- };
- 
-+static struct mci_platform_data __initdata mci0_data = {
-+	.detect_pin	= GPIO_PIN_PC(25),
-+	.wp_pin		= GPIO_PIN_PE(0),
-+};
-+
- /*
-  * The next two functions should go away as the boot loader is
-  * supposed to initialize the macb address registers with a valid
-@@ -124,6 +136,7 @@ static struct platform_device ngw_gpio_l
- 	}
- };
- 
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
- static struct i2c_gpio_platform_data i2c_gpio_data = {
- 	.sda_pin		= GPIO_PIN_PA(6),
- 	.scl_pin		= GPIO_PIN_PA(7),
-@@ -139,6 +152,7 @@ static struct platform_device i2c_gpio_d
- 		.platform_data	= &i2c_gpio_data,
- 	},
- };
-+#endif
- 
- static int __init atngw100_init(void)
- {
-@@ -157,6 +171,7 @@ static int __init atngw100_init(void)
- 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
- 
- 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+	at32_add_device_mci(0, &mci0_data);
- 	at32_add_device_usba(0, NULL);
- 
- 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
-@@ -165,11 +180,15 @@ static int __init atngw100_init(void)
- 	}
- 	platform_device_register(&ngw_gpio_leds);
- 
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
- 	at32_select_gpio(i2c_gpio_data.sda_pin,
- 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
- 	at32_select_gpio(i2c_gpio_data.scl_pin,
- 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
- 	platform_device_register(&i2c_gpio_device);
-+#else
-+	at32_add_device_twi(0, NULL, 0);
-+#endif
- 
- 	return 0;
- }
---- a/arch/avr32/boards/atstk1000/Kconfig
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
- 	bool "ATSTK1004"
- 	select CPU_AT32AP7002
- 
-+config BOARD_ATSTK1006
-+	bool "ATSTK1006"
-+	select CPU_AT32AP7000
-+
- endchoice
- 
- 
-@@ -102,4 +106,60 @@ config BOARD_ATSTK1000_EXTDAC
- 	depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
- 	default y
- 
-+config BOARD_ATSTK100X_ENABLE_AC97
-+	bool "Use AC97C instead of ABDAC"
-+	help
-+	  Select this if you want to use the built-in AC97 controller
-+	  instead of the built-in Audio Bitstream DAC. These share
-+	  the same I/O pins on the AP7000, so both can't be enabled
-+	  at the same time.
-+
-+	  Note that the STK1000 kit doesn't ship with an AC97 codec on
-+	  board, so say N unless you've got an expansion board with an
-+	  AC97 codec on it that you want to use.
-+
-+config BOARD_ATSTK1000_CF_HACKS
-+	bool "ATSTK1000 CompactFlash hacks"
-+	depends on !BOARD_ATSTK100X_SW4_CUSTOM
-+	help
-+	  Select this if you have re-routed the CompactFlash RESET and
-+	  CD signals to GPIOs on your STK1000. This is necessary for
-+	  reset and card detection to work properly, although some CF
-+	  cards may be able to cope without reset.
-+
-+config BOARD_ATSTK1000_CF_RESET_PIN
-+	hex "CompactFlash RESET pin"
-+	default 0x30
-+	depends on BOARD_ATSTK1000_CF_HACKS
-+	help
-+	  Select which GPIO pin to use for the CompactFlash RESET
-+	  signal. This is specified as a hexadecimal number and should
-+	  be defined as 0x20 * gpio_port + pin.
-+
-+	  The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
-+
-+config BOARD_ATSTK1000_CF_DETECT_PIN
-+	hex "CompactFlash DETECT pin"
-+	default 0x3e
-+	depends on BOARD_ATSTK1000_CF_HACKS
-+	help
-+	  Select which GPIO pin to use for the CompactFlash CD
-+	  signal. This is specified as a hexadecimal number and should
-+	  be defined as 0x20 * gpio_port + pin.
-+
-+	  The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
-+
-+config BOARD_ATSTK100X_ENABLE_PSIF
-+	bool "Enable PSIF peripheral (PS/2 support)"
-+	default n
-+	help
-+	  Select this if you want to use the PSIF peripheral to hook up PS/2
-+	  devices to your STK1000. This will require a hardware modification to
-+	  work correctly, since PS/2 devices require 5 volt power and signals,
-+	  while the STK1000 only provides 3.3 volt.
-+
-+	  Say N if you have not modified the hardware to boost the voltage, say
-+	  Y if you have level convertion hardware or a PS/2 device capable of
-+	  operating on 3.3 volt.
-+
- endif	# stk 1000
---- a/arch/avr32/boards/atstk1000/Makefile
-+++ b/arch/avr32/boards/atstk1000/Makefile
-@@ -2,3 +2,4 @@ obj-y				+= setup.o flash.o
- obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
- obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
- obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
-+obj-$(CONFIG_BOARD_ATSTK1006)	+= atstk1002.o
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -1,7 +1,7 @@
- /*
-- * ATSTK1002 daughterboard-specific init code
-+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
-  *
-- * Copyright (C) 2005-2006 Atmel Corporation
-+ * Copyright (C) 2005-2007 Atmel Corporation
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License version 2 as
-@@ -28,6 +28,80 @@
- 
- #include "atstk1000.h"
- 
-+/* Oscillator frequencies. These are board specific */
-+unsigned long at32_board_osc_rates[3] = {
-+	[0] = 32768,	/* 32.768 kHz on RTC osc */
-+	[1] = 20000000,	/* 20 MHz on osc0 */
-+	[2] = 12000000,	/* 12 MHz on osc1 */
-+};
-+
-+/*
-+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
-+ * have the AT32AP7000 chip on board; the difference is that the
-+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
-+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
-+ * none.)
-+ *
-+ * The RAM difference is handled by the boot loader, so the only
-+ * difference we end up handling here is the NAND flash.
-+ */
-+#ifdef CONFIG_BOARD_ATSTK1006
-+#include <linux/mtd/partitions.h>
-+#include <asm/arch/smc.h>
-+
-+static struct smc_timing nand_timing __initdata = {
-+	.ncs_read_setup		= 0,
-+	.nrd_setup		= 10,
-+	.ncs_write_setup	= 0,
-+	.nwe_setup		= 10,
-+
-+	.ncs_read_pulse		= 30,
-+	.nrd_pulse		= 15,
-+	.ncs_write_pulse	= 30,
-+	.nwe_pulse		= 15,
-+
-+	.read_cycle		= 30,
-+	.write_cycle		= 30,
-+
-+	.ncs_read_recover	= 0,
-+	.nrd_recover		= 15,
-+	.ncs_write_recover	= 0,
-+	/* WE# high -> RE# low min 60 ns */
-+	.nwe_recover		= 50,
-+};
-+
-+static struct smc_config nand_config __initdata = {
-+	.bus_width		= 1,
-+	.nrd_controlled		= 1,
-+	.nwe_controlled		= 1,
-+	.nwait_mode		= 0,
-+	.byte_write		= 0,
-+	.tdf_cycles		= 2,
-+	.tdf_mode		= 0,
-+};
-+
-+static struct mtd_partition nand_partitions[] = {
-+	{
-+		.name		= "main",
-+		.offset		= 0x00000000,
-+		.size		= MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(nand_partitions);
-+	return nand_partitions;
-+}
-+
-+static struct atmel_nand_data atstk1006_nand_data __initdata = {
-+	.cle		= 21,
-+	.ale		= 22,
-+	.rdy_pin	= GPIO_PIN_PB(30),
-+	.enable_pin	= GPIO_PIN_PB(29),
-+	.partition_info	= nand_part_info,
-+};
-+#endif
- 
- struct eth_addr {
- 	u8 addr[6];
-@@ -83,6 +157,19 @@ static struct spi_board_info spi1_board_
- } };
- #endif
- 
-+static struct cf_platform_data __initdata cf0_data = {
-+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
-+	.detect_pin	= CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
-+	.reset_pin	= CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
-+#else
-+	.detect_pin	= GPIO_PIN_NONE,
-+	.reset_pin	= GPIO_PIN_NONE,
-+#endif
-+	.vcc_pin	= GPIO_PIN_NONE,
-+	.ready_pin	= GPIO_PIN_PB(27),
-+	.cs		= 4,
-+};
-+
- /*
-  * The next two functions should go away as the boot loader is
-  * supposed to initialize the macb address registers with a valid
-@@ -212,6 +299,12 @@ static int __init atstk1002_init(void)
- 
- 	at32_add_system_devices();
- 
-+#ifdef CONFIG_BOARD_ATSTK1006
-+	smc_set_timing(&nand_config, &nand_timing);
-+	smc_set_configuration(3, &nand_config);
-+	at32_add_device_nand(0, &atstk1006_nand_data);
-+#endif
-+
- #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- 	at32_add_device_usart(1);
- #else
-@@ -228,16 +321,30 @@ static int __init atstk1002_init(void)
- #ifdef CONFIG_BOARD_ATSTK100X_SPI1
- 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
-+	at32_add_device_twi(0, NULL, 0);
-+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+	at32_add_device_mci(0, NULL);
-+#endif
- #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
- 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
- #else
- 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
--			     fbmem_start, fbmem_size);
-+			     fbmem_start, fbmem_size, 0);
- #endif
- 	at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+	at32_add_device_ac97c(0, NULL);
-+#else
-+	at32_add_device_abdac(0);
-+#endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
- 	at32_add_device_ssc(0, ATMEL_SSC_TX);
- #endif
-+	at32_add_device_cf(0, 2, &cf0_data);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
-+	at32_add_device_psif(0);
-+	at32_add_device_psif(1);
-+#endif
- 
- 	atstk1000_setup_j2_leds();
- 	atstk1002_setup_extdac();
---- a/arch/avr32/boards/atstk1000/atstk1003.c
-+++ b/arch/avr32/boards/atstk1000/atstk1003.c
-@@ -27,6 +27,13 @@
- 
- #include "atstk1000.h"
- 
-+/* Oscillator frequencies. These are board specific */
-+unsigned long at32_board_osc_rates[3] = {
-+	[0] = 32768,	/* 32.768 kHz on RTC osc */
-+	[1] = 20000000,	/* 20 MHz on osc0 */
-+	[2] = 12000000,	/* 12 MHz on osc1 */
-+};
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static struct at73c213_board_info at73c213_data = {
- 	.ssc_id		= 0,
-@@ -59,6 +66,19 @@ static struct spi_board_info spi1_board_
- } };
- #endif
- 
-+static struct cf_platform_data __initdata cf0_data = {
-+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
-+	.detect_pin	= CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
-+	.reset_pin	= CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
-+#else
-+	.detect_pin	= GPIO_PIN_NONE,
-+	.reset_pin	= GPIO_PIN_NONE,
-+#endif
-+	.vcc_pin	= GPIO_PIN_NONE,
-+	.ready_pin	= GPIO_PIN_PB(27),
-+	.cs		= 4,
-+};
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static void __init atstk1003_setup_extdac(void)
- {
-@@ -147,12 +167,22 @@ static int __init atstk1003_init(void)
- 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
--	at32_add_device_mci(0);
-+	at32_add_device_mci(0, NULL);
- #endif
- 	at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+	at32_add_device_ac97c(0, NULL);
-+#else
-+	at32_add_device_abdac(0);
-+#endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
- 	at32_add_device_ssc(0, ATMEL_SSC_TX);
- #endif
-+	at32_add_device_cf(0, 2, &cf0_data);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
-+	at32_add_device_psif(0);
-+	at32_add_device_psif(1);
-+#endif
- 
- 	atstk1000_setup_j2_leds();
- 	atstk1003_setup_extdac();
---- a/arch/avr32/boards/atstk1000/atstk1004.c
-+++ b/arch/avr32/boards/atstk1000/atstk1004.c
-@@ -29,6 +29,13 @@
- 
- #include "atstk1000.h"
- 
-+/* Oscillator frequencies. These are board specific */
-+unsigned long at32_board_osc_rates[3] = {
-+	[0] = 32768,	/* 32.768 kHz on RTC osc */
-+	[1] = 20000000,	/* 20 MHz on osc0 */
-+	[2] = 12000000,	/* 12 MHz on osc1 */
-+};
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static struct at73c213_board_info at73c213_data = {
- 	.ssc_id		= 0,
-@@ -130,14 +137,23 @@ static int __init atstk1004_init(void)
- 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
--	at32_add_device_mci(0);
-+	at32_add_device_mci(0, NULL);
- #endif
- 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
--			     fbmem_start, fbmem_size);
-+			     fbmem_start, fbmem_size, 0);
- 	at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+	at32_add_device_ac97c(0, NULL);
-+#else
-+	at32_add_device_abdac(0);
-+#endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
- 	at32_add_device_ssc(0, ATMEL_SSC_TX);
- #endif
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
-+	at32_add_device_psif(0);
-+	at32_add_device_psif(1);
-+#endif
- 
- 	atstk1000_setup_j2_leds();
- 	atstk1004_setup_extdac();
---- a/arch/avr32/configs/atngw100_defconfig
-+++ b/arch/avr32/configs/atngw100_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24-rc7
--# Wed Jan  9 23:20:41 2008
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:23:36 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
--CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
-@@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y
- CONFIG_BSD_PROCESS_ACCT=y
- CONFIG_BSD_PROCESS_ACCT_V3=y
- # CONFIG_TASKSTATS is not set
--# CONFIG_USER_NS is not set
--# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
--CONFIG_FAIR_GROUP_SCHED=y
--CONFIG_FAIR_USER_SCHED=y
--# CONFIG_FAIR_CGROUP_SCHED is not set
-+# CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
- # CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
- CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
- CONFIG_FUTEX=y
- CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
- CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
-@@ -73,6 +73,14 @@ CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
-@@ -101,10 +109,15 @@ CONFIG_IOSCHED_CFQ=y
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
- 
- #
- # System Type and features
- #
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-@@ -113,6 +126,7 @@ CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
- # CONFIG_BOARD_ATSTK1000 is not set
- CONFIG_BOARD_ATNGW100=y
-+CONFIG_BOARD_ATNGW100_I2C_GPIO=y
- CONFIG_LOADER_U_BOOT=y
- 
- #
-@@ -121,6 +135,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP700X_32_BIT_SMC is not set
- CONFIG_AP700X_16_BIT_SMC=y
- # CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -146,16 +161,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- CONFIG_ZONE_DMA_FLAG=0
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
- CONFIG_CMDLINE=""
- 
- #
- # Power management options
- #
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
- 
- #
- # CPU Frequency scaling
-@@ -164,9 +189,9 @@ CONFIG_CPU_FREQ=y
- CONFIG_CPU_FREQ_TABLE=y
- # CONFIG_CPU_FREQ_DEBUG is not set
- # CONFIG_CPU_FREQ_STAT is not set
--CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
- # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
- # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
- CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
- # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-@@ -202,6 +227,7 @@ CONFIG_XFRM=y
- CONFIG_XFRM_USER=y
- # CONFIG_XFRM_SUB_POLICY is not set
- # CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
- CONFIG_NET_KEY=y
- # CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
-@@ -260,82 +286,33 @@ CONFIG_IPV6_SIT=y
- # CONFIG_NETWORK_SECMARK is not set
- CONFIG_NETFILTER=y
- # CONFIG_NETFILTER_DEBUG is not set
--CONFIG_BRIDGE_NETFILTER=y
-+# CONFIG_NETFILTER_ADVANCED is not set
- 
- #
- # Core Netfilter Configuration
- #
--# CONFIG_NETFILTER_NETLINK is not set
--CONFIG_NF_CONNTRACK_ENABLED=m
-+CONFIG_NETFILTER_NETLINK=m
-+CONFIG_NETFILTER_NETLINK_LOG=m
- CONFIG_NF_CONNTRACK=m
--CONFIG_NF_CT_ACCT=y
--CONFIG_NF_CONNTRACK_MARK=y
--# CONFIG_NF_CONNTRACK_EVENTS is not set
--CONFIG_NF_CT_PROTO_GRE=m
--# CONFIG_NF_CT_PROTO_SCTP is not set
--# CONFIG_NF_CT_PROTO_UDPLITE is not set
--CONFIG_NF_CONNTRACK_AMANDA=m
- CONFIG_NF_CONNTRACK_FTP=m
--CONFIG_NF_CONNTRACK_H323=m
- CONFIG_NF_CONNTRACK_IRC=m
--CONFIG_NF_CONNTRACK_NETBIOS_NS=m
--CONFIG_NF_CONNTRACK_PPTP=m
--CONFIG_NF_CONNTRACK_SANE=m
- CONFIG_NF_CONNTRACK_SIP=m
--CONFIG_NF_CONNTRACK_TFTP=m
-+CONFIG_NF_CT_NETLINK=m
- CONFIG_NETFILTER_XTABLES=y
--CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
--# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
--# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
- CONFIG_NETFILTER_XT_TARGET_MARK=m
--CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
- CONFIG_NETFILTER_XT_TARGET_NFLOG=m
--# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
--# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
- CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
--CONFIG_NETFILTER_XT_MATCH_COMMENT=m
--CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
--# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
--CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
- CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
--# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
--# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
--CONFIG_NETFILTER_XT_MATCH_ESP=m
--CONFIG_NETFILTER_XT_MATCH_HELPER=m
--CONFIG_NETFILTER_XT_MATCH_LENGTH=m
--CONFIG_NETFILTER_XT_MATCH_LIMIT=m
--CONFIG_NETFILTER_XT_MATCH_MAC=m
- CONFIG_NETFILTER_XT_MATCH_MARK=m
- CONFIG_NETFILTER_XT_MATCH_POLICY=m
--CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
--# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
--CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
--CONFIG_NETFILTER_XT_MATCH_QUOTA=m
--CONFIG_NETFILTER_XT_MATCH_REALM=m
--# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
- CONFIG_NETFILTER_XT_MATCH_STATE=m
--CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
--CONFIG_NETFILTER_XT_MATCH_STRING=m
--CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
--# CONFIG_NETFILTER_XT_MATCH_TIME is not set
--# CONFIG_NETFILTER_XT_MATCH_U32 is not set
--CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
- 
- #
- # IP: Netfilter Configuration
- #
- CONFIG_NF_CONNTRACK_IPV4=m
- CONFIG_NF_CONNTRACK_PROC_COMPAT=y
--# CONFIG_IP_NF_QUEUE is not set
- CONFIG_IP_NF_IPTABLES=m
--CONFIG_IP_NF_MATCH_IPRANGE=m
--CONFIG_IP_NF_MATCH_TOS=m
--CONFIG_IP_NF_MATCH_RECENT=m
--CONFIG_IP_NF_MATCH_ECN=m
--CONFIG_IP_NF_MATCH_AH=m
--CONFIG_IP_NF_MATCH_TTL=m
--CONFIG_IP_NF_MATCH_OWNER=m
--CONFIG_IP_NF_MATCH_ADDRTYPE=m
- CONFIG_IP_NF_FILTER=m
- CONFIG_IP_NF_TARGET_REJECT=m
- CONFIG_IP_NF_TARGET_LOG=m
-@@ -343,54 +320,25 @@ CONFIG_IP_NF_TARGET_LOG=m
- CONFIG_NF_NAT=m
- CONFIG_NF_NAT_NEEDED=y
- CONFIG_IP_NF_TARGET_MASQUERADE=m
--CONFIG_IP_NF_TARGET_REDIRECT=m
--CONFIG_IP_NF_TARGET_NETMAP=m
--CONFIG_IP_NF_TARGET_SAME=m
--CONFIG_NF_NAT_SNMP_BASIC=m
--CONFIG_NF_NAT_PROTO_GRE=m
- CONFIG_NF_NAT_FTP=m
- CONFIG_NF_NAT_IRC=m
--CONFIG_NF_NAT_TFTP=m
--CONFIG_NF_NAT_AMANDA=m
--CONFIG_NF_NAT_PPTP=m
--CONFIG_NF_NAT_H323=m
-+# CONFIG_NF_NAT_TFTP is not set
-+# CONFIG_NF_NAT_AMANDA is not set
-+# CONFIG_NF_NAT_PPTP is not set
-+# CONFIG_NF_NAT_H323 is not set
- CONFIG_NF_NAT_SIP=m
- CONFIG_IP_NF_MANGLE=m
--CONFIG_IP_NF_TARGET_TOS=m
--CONFIG_IP_NF_TARGET_ECN=m
--CONFIG_IP_NF_TARGET_TTL=m
--CONFIG_IP_NF_TARGET_CLUSTERIP=m
--CONFIG_IP_NF_RAW=m
--CONFIG_IP_NF_ARPTABLES=m
--CONFIG_IP_NF_ARPFILTER=m
--CONFIG_IP_NF_ARP_MANGLE=m
- 
- #
--# IPv6: Netfilter Configuration (EXPERIMENTAL)
-+# IPv6: Netfilter Configuration
- #
- CONFIG_NF_CONNTRACK_IPV6=m
--CONFIG_IP6_NF_QUEUE=m
- CONFIG_IP6_NF_IPTABLES=m
--CONFIG_IP6_NF_MATCH_RT=m
--CONFIG_IP6_NF_MATCH_OPTS=m
--CONFIG_IP6_NF_MATCH_FRAG=m
--CONFIG_IP6_NF_MATCH_HL=m
--CONFIG_IP6_NF_MATCH_OWNER=m
- CONFIG_IP6_NF_MATCH_IPV6HEADER=m
--CONFIG_IP6_NF_MATCH_AH=m
--CONFIG_IP6_NF_MATCH_MH=m
--CONFIG_IP6_NF_MATCH_EUI64=m
- CONFIG_IP6_NF_FILTER=m
- CONFIG_IP6_NF_TARGET_LOG=m
- CONFIG_IP6_NF_TARGET_REJECT=m
- CONFIG_IP6_NF_MANGLE=m
--CONFIG_IP6_NF_TARGET_HL=m
--CONFIG_IP6_NF_RAW=m
--
--#
--# Bridge: Netfilter Configuration
--#
--# CONFIG_BRIDGE_NF_EBTABLES is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
-@@ -407,7 +355,6 @@ CONFIG_LLC=m
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
- # CONFIG_NET_SCHED is not set
--CONFIG_NET_CLS_ROUTE=y
- 
- #
- # Network testing
-@@ -415,6 +362,7 @@ CONFIG_NET_CLS_ROUTE=y
- # CONFIG_NET_PKTGEN is not set
- # CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
-@@ -531,11 +479,18 @@ CONFIG_BLK_DEV_NBD=m
- CONFIG_BLK_DEV_RAM=m
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=4096
--CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_BLK_DEV_XIP is not set
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
--# CONFIG_MISC_DEVICES is not set
--# CONFIG_IDE is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_ATMEL_PWM is not set
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_ATMEL_SSC is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
- 
- #
- # SCSI device support
-@@ -568,11 +523,13 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
- # CONFIG_MII is not set
- CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
- # CONFIG_IBM_NEW_EMAC_ZMII is not set
- # CONFIG_IBM_NEW_EMAC_RGMII is not set
- # CONFIG_IBM_NEW_EMAC_TAH is not set
-@@ -599,7 +556,6 @@ CONFIG_PPPOE=m
- # CONFIG_PPPOL2TP is not set
- # CONFIG_SLIP is not set
- CONFIG_SLHC=m
--# CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-@@ -633,6 +589,7 @@ CONFIG_SLHC=m
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -640,8 +597,6 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
--# CONFIG_RTC is not set
--# CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-@@ -659,6 +614,7 @@ CONFIG_I2C_ALGOBIT=m
- #
- # I2C Hardware Bus support
- #
-+CONFIG_I2C_ATMELTWI=m
- CONFIG_I2C_GPIO=m
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
-@@ -669,13 +625,12 @@ CONFIG_I2C_GPIO=m
- #
- # Miscellaneous I2C Chip support
- #
--# CONFIG_SENSORS_DS1337 is not set
--# CONFIG_SENSORS_DS1374 is not set
- # CONFIG_DS1682 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_PCF8575 is not set
- # CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
- # CONFIG_SENSORS_MAX6875 is not set
- # CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
-@@ -702,9 +657,27 @@ CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_AT25 is not set
- CONFIG_SPI_SPIDEV=m
- # CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+# CONFIG_DEBUG_GPIO is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
- 
-@@ -757,10 +730,6 @@ CONFIG_USB_SUPPORT=y
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
--
--#
--# USB Gadget Support
--#
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
-@@ -787,21 +756,24 @@ CONFIG_USB_FILE_STORAGE=m
- # CONFIG_USB_FILE_STORAGE_TEST is not set
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
--CONFIG_MMC=m
-+# CONFIG_USB_G_PRINTER is not set
-+CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
- 
- #
- # MMC/SD Card Drivers
- #
--CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_BLOCK=y
- CONFIG_MMC_BLOCK_BOUNCE=y
- # CONFIG_SDIO_UART is not set
- 
- #
- # MMC/SD Host Controller Drivers
- #
-+CONFIG_MMC_ATMELMCI=y
- CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
- CONFIG_LEDS_CLASS=y
- 
-@@ -844,19 +816,22 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
- # CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
- 
- #
- # SPI RTC drivers
- #
--# CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
- 
- #
- # Platform RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1511 is not set
- # CONFIG_RTC_DRV_DS1553 is not set
--# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-@@ -874,25 +849,23 @@ CONFIG_RTC_DRV_AT32AP700X=y
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
- # CONFIG_OCFS2_FS is not set
--# CONFIG_MINIX_FS is not set
--# CONFIG_ROMFS_FS is not set
-+# CONFIG_DNOTIFY is not set
- CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
--# CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
- CONFIG_FUSE_FS=m
-@@ -923,7 +896,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
- 
- #
- # Miscellaneous filesystems
-@@ -948,8 +921,10 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1030,11 +1005,6 @@ CONFIG_NLS_ISO8859_1=m
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=m
- # CONFIG_DLM is not set
--CONFIG_INSTRUMENTATION=y
--CONFIG_PROFILING=y
--CONFIG_OPROFILE=m
--CONFIG_KPROBES=y
--# CONFIG_MARKERS is not set
- 
- #
- # Kernel hacking
-@@ -1053,6 +1023,7 @@ CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
- # CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-@@ -1069,9 +1040,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_LIST is not set
- # CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
--# CONFIG_FORCED_INLINING is not set
- # CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
- # CONFIG_LKDTM is not set
- # CONFIG_FAULT_INJECTION is not set
- # CONFIG_SAMPLES is not set
-@@ -1084,7 +1056,9 @@ CONFIG_FRAME_POINTER=y
- # CONFIG_SECURITY_FILE_CAPABILITIES is not set
- CONFIG_CRYPTO=y
- CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=y
- CONFIG_CRYPTO_BLKCIPHER=y
-+# CONFIG_CRYPTO_SEQIV is not set
- CONFIG_CRYPTO_HASH=y
- CONFIG_CRYPTO_MANAGER=y
- CONFIG_CRYPTO_HMAC=y
-@@ -1103,6 +1077,9 @@ CONFIG_CRYPTO_CBC=y
- CONFIG_CRYPTO_PCBC=m
- # CONFIG_CRYPTO_LRW is not set
- # CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_CCM is not set
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_DES=y
- # CONFIG_CRYPTO_FCRYPT is not set
-@@ -1117,12 +1094,14 @@ CONFIG_CRYPTO_ARC4=m
- # CONFIG_CRYPTO_KHAZAD is not set
- # CONFIG_CRYPTO_ANUBIS is not set
- # CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
- CONFIG_CRYPTO_DEFLATE=y
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
- # CONFIG_CRYPTO_CRC32C is not set
- # CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_TEST is not set
--# CONFIG_CRYPTO_AUTHENC is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+# CONFIG_CRYPTO_LZO is not set
- CONFIG_CRYPTO_HW=y
- 
- #
-@@ -1137,10 +1116,7 @@ CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
--CONFIG_TEXTSEARCH=y
--CONFIG_TEXTSEARCH_KMP=m
--CONFIG_TEXTSEARCH_BM=m
--CONFIG_TEXTSEARCH_FSM=m
-+CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
---- a/arch/avr32/configs/atstk1002_defconfig
-+++ b/arch/avr32/configs/atstk1002_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24-rc7
--# Wed Jan  9 23:07:43 2008
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:29:18 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
--CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
-@@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y
- CONFIG_POSIX_MQUEUE=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_USER_NS is not set
--# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
--# CONFIG_FAIR_GROUP_SCHED is not set
-+# CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
- CONFIG_RELAY=y
-+# CONFIG_NAMESPACES is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
- CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
- CONFIG_FUTEX=y
- CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
- CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
-@@ -70,6 +72,14 @@ CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
-@@ -98,10 +108,15 @@ CONFIG_IOSCHED_CFQ=y
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
- 
- #
- # System Type and features
- #
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-@@ -113,12 +128,16 @@ CONFIG_BOARD_ATSTK1000=y
- CONFIG_BOARD_ATSTK1002=y
- # CONFIG_BOARD_ATSTK1003 is not set
- # CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
- # CONFIG_BOARD_ATSTK1000_J2_RGB is not set
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
- CONFIG_LOADER_U_BOOT=y
- 
- #
-@@ -127,6 +146,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP700X_32_BIT_SMC is not set
- CONFIG_AP700X_16_BIT_SMC=y
- # CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -152,16 +172,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- CONFIG_ZONE_DMA_FLAG=0
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
- CONFIG_CMDLINE=""
- 
- #
- # Power management options
- #
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
- 
- #
- # CPU Frequency scaling
-@@ -170,9 +200,9 @@ CONFIG_CPU_FREQ=y
- CONFIG_CPU_FREQ_TABLE=y
- # CONFIG_CPU_FREQ_DEBUG is not set
- # CONFIG_CPU_FREQ_STAT is not set
--CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
- # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
- # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
- CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
- # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-@@ -208,6 +238,7 @@ CONFIG_XFRM=y
- CONFIG_XFRM_USER=m
- # CONFIG_XFRM_SUB_POLICY is not set
- # CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
- CONFIG_NET_KEY=m
- # CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
-@@ -279,6 +310,7 @@ CONFIG_LLC=m
- # CONFIG_NET_PKTGEN is not set
- # CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
-@@ -395,13 +427,18 @@ CONFIG_BLK_DEV_NBD=m
- CONFIG_BLK_DEV_RAM=m
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=4096
--CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_BLK_DEV_XIP is not set
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
- # CONFIG_EEPROM_93CX6 is not set
- CONFIG_ATMEL_SSC=m
--# CONFIG_IDE is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
- 
- #
- # SCSI device support
-@@ -444,6 +481,7 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_LOWLEVEL is not set
- CONFIG_ATA=m
- # CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_MV is not set
- CONFIG_PATA_AT32=m
- # CONFIG_PATA_PLATFORM is not set
- # CONFIG_MD is not set
-@@ -469,11 +507,13 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
- # CONFIG_MII is not set
- CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
- # CONFIG_IBM_NEW_EMAC_ZMII is not set
- # CONFIG_IBM_NEW_EMAC_RGMII is not set
- # CONFIG_IBM_NEW_EMAC_TAH is not set
-@@ -500,7 +540,6 @@ CONFIG_PPP_BSDCOMP=m
- # CONFIG_PPPOL2TP is not set
- # CONFIG_SLIP is not set
- CONFIG_SLHC=m
--# CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-@@ -568,6 +607,7 @@ CONFIG_MOUSE_GPIO=m
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -575,8 +615,6 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
--# CONFIG_RTC is not set
--# CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-@@ -594,6 +632,7 @@ CONFIG_I2C_ALGOBIT=m
- #
- # I2C Hardware Bus support
- #
-+CONFIG_I2C_ATMELTWI=m
- CONFIG_I2C_GPIO=m
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
-@@ -604,13 +643,12 @@ CONFIG_I2C_GPIO=m
- #
- # Miscellaneous I2C Chip support
- #
--# CONFIG_SENSORS_DS1337 is not set
--# CONFIG_SENSORS_DS1374 is not set
- # CONFIG_DS1682 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_PCF8575 is not set
- # CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
- # CONFIG_SENSORS_MAX6875 is not set
- # CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
-@@ -637,9 +675,27 @@ CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_AT25 is not set
- CONFIG_SPI_SPIDEV=m
- # CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+# CONFIG_DEBUG_GPIO is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
- 
-@@ -732,12 +788,18 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
- #
- # Generic devices
- #
-+CONFIG_SND_AC97_CODEC=m
- # CONFIG_SND_DUMMY is not set
- # CONFIG_SND_MTPAV is not set
- # CONFIG_SND_SERIAL_U16550 is not set
- # CONFIG_SND_MPU401 is not set
- 
- #
-+# AVR32 devices
-+#
-+CONFIG_SND_ATMEL_AC97=m
-+
-+#
- # SPI devices
- #
- CONFIG_SND_AT73C213=m
-@@ -753,9 +815,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
- #
- 
- #
-+# ALSA SoC audio for Freescale SOCs
-+#
-+
-+#
- # Open Sound System
- #
- # CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=m
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
- # CONFIG_USB_ARCH_HAS_HCD is not set
-@@ -765,10 +832,6 @@ CONFIG_USB_SUPPORT=y
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
--
--#
--# USB Gadget Support
--#
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
-@@ -796,27 +859,31 @@ CONFIG_USB_FILE_STORAGE=m
- # CONFIG_USB_FILE_STORAGE_TEST is not set
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
--CONFIG_MMC=m
-+# CONFIG_USB_G_PRINTER is not set
-+CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
- 
- #
- # MMC/SD Card Drivers
- #
--CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_BLOCK=y
- CONFIG_MMC_BLOCK_BOUNCE=y
- # CONFIG_SDIO_UART is not set
- 
- #
- # MMC/SD Host Controller Drivers
- #
-+CONFIG_MMC_ATMELMCI=y
- CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
- CONFIG_LEDS_CLASS=m
- 
- #
- # LED drivers
- #
-+CONFIG_LEDS_ATMEL_PWM=m
- CONFIG_LEDS_GPIO=m
- 
- #
-@@ -853,19 +920,22 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
- # CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
- 
- #
- # SPI RTC drivers
- #
--# CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
- 
- #
- # Platform RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1511 is not set
- # CONFIG_RTC_DRV_DS1553 is not set
--# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-@@ -883,13 +953,13 @@ CONFIG_RTC_DRV_AT32AP700X=y
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
-@@ -897,12 +967,10 @@ CONFIG_JBD=m
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
- # CONFIG_OCFS2_FS is not set
--CONFIG_MINIX_FS=m
--# CONFIG_ROMFS_FS is not set
-+# CONFIG_DNOTIFY is not set
- CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
--# CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
- CONFIG_FUSE_FS=m
-@@ -933,7 +1001,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--# CONFIG_CONFIGFS_FS is not set
-+CONFIG_CONFIGFS_FS=y
- 
- #
- # Miscellaneous filesystems
-@@ -957,8 +1025,10 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=m
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1028,11 +1098,6 @@ CONFIG_NLS_ISO8859_1=m
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=m
- # CONFIG_DLM is not set
--CONFIG_INSTRUMENTATION=y
--CONFIG_PROFILING=y
--CONFIG_OPROFILE=m
--CONFIG_KPROBES=y
--# CONFIG_MARKERS is not set
- 
- #
- # Kernel hacking
-@@ -1051,6 +1116,7 @@ CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
- # CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-@@ -1067,9 +1133,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_LIST is not set
- # CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
--CONFIG_FORCED_INLINING=y
- # CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
- # CONFIG_LKDTM is not set
- # CONFIG_FAULT_INJECTION is not set
- # CONFIG_SAMPLES is not set
-@@ -1082,7 +1149,9 @@ CONFIG_FORCED_INLINING=y
- # CONFIG_SECURITY_FILE_CAPABILITIES is not set
- CONFIG_CRYPTO=y
- CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_AEAD=m
- CONFIG_CRYPTO_BLKCIPHER=m
-+# CONFIG_CRYPTO_SEQIV is not set
- CONFIG_CRYPTO_HASH=m
- CONFIG_CRYPTO_MANAGER=m
- CONFIG_CRYPTO_HMAC=m
-@@ -1101,6 +1170,9 @@ CONFIG_CRYPTO_CBC=m
- # CONFIG_CRYPTO_PCBC is not set
- # CONFIG_CRYPTO_LRW is not set
- # CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_CCM is not set
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_DES=m
- # CONFIG_CRYPTO_FCRYPT is not set
-@@ -1115,12 +1187,14 @@ CONFIG_CRYPTO_DES=m
- # CONFIG_CRYPTO_KHAZAD is not set
- # CONFIG_CRYPTO_ANUBIS is not set
- # CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
- CONFIG_CRYPTO_DEFLATE=m
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
- # CONFIG_CRYPTO_CRC32C is not set
- # CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_TEST is not set
--# CONFIG_CRYPTO_AUTHENC is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_LZO is not set
- # CONFIG_CRYPTO_HW is not set
- 
- #
-@@ -1135,6 +1209,7 @@ CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
---- a/arch/avr32/configs/atstk1003_defconfig
-+++ b/arch/avr32/configs/atstk1003_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24-rc7
--# Wed Jan  9 22:54:34 2008
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:33:36 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
--CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
-@@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
- CONFIG_TASKSTATS=y
- CONFIG_TASK_DELAY_ACCT=y
- # CONFIG_TASK_XACCT is not set
--# CONFIG_USER_NS is not set
--# CONFIG_PID_NS is not set
- CONFIG_AUDIT=y
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
--CONFIG_FAIR_GROUP_SCHED=y
--CONFIG_FAIR_USER_SCHED=y
--# CONFIG_FAIR_CGROUP_SCHED is not set
-+# CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
- CONFIG_RELAY=y
-+# CONFIG_NAMESPACES is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
- CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
- CONFIG_FUTEX=y
- CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
- CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
-@@ -75,6 +75,14 @@ CONFIG_VM_EVENT_COUNTERS=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
-@@ -103,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
- 
- #
- # System Type and features
- #
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-@@ -118,12 +131,16 @@ CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATSTK1002 is not set
- CONFIG_BOARD_ATSTK1003=y
- # CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
- # CONFIG_BOARD_ATSTK1000_J2_RGB is not set
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
- CONFIG_LOADER_U_BOOT=y
- 
- #
-@@ -132,6 +149,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP700X_32_BIT_SMC is not set
- CONFIG_AP700X_16_BIT_SMC=y
- # CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -157,16 +175,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- CONFIG_ZONE_DMA_FLAG=0
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
- CONFIG_CMDLINE=""
- 
- #
- # Power management options
- #
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
- 
- #
- # CPU Frequency scaling
-@@ -175,9 +203,9 @@ CONFIG_CPU_FREQ=y
- CONFIG_CPU_FREQ_TABLE=y
- # CONFIG_CPU_FREQ_DEBUG is not set
- # CONFIG_CPU_FREQ_STAT is not set
--CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
- # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
- # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
- CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
- # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-@@ -260,6 +288,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_NET_PKTGEN is not set
- # CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
-@@ -376,13 +405,18 @@ CONFIG_BLK_DEV_NBD=m
- CONFIG_BLK_DEV_RAM=m
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=4096
--CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_BLK_DEV_XIP is not set
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
- # CONFIG_EEPROM_93CX6 is not set
- CONFIG_ATMEL_SSC=m
--# CONFIG_IDE is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
- 
- #
- # SCSI device support
-@@ -427,6 +461,7 @@ CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_SCSI_DEBUG is not set
- CONFIG_ATA=m
- # CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_MV is not set
- CONFIG_PATA_AT32=m
- # CONFIG_PATA_PLATFORM is not set
- # CONFIG_MD is not set
-@@ -460,7 +495,6 @@ CONFIG_PPP_BSDCOMP=m
- # CONFIG_PPPOL2TP is not set
- # CONFIG_SLIP is not set
- CONFIG_SLHC=m
--# CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-@@ -528,6 +562,7 @@ CONFIG_MOUSE_GPIO=m
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -535,8 +570,6 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
--# CONFIG_RTC is not set
--# CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-@@ -554,6 +587,7 @@ CONFIG_I2C_ALGOBIT=m
- #
- # I2C Hardware Bus support
- #
-+CONFIG_I2C_ATMELTWI=m
- CONFIG_I2C_GPIO=m
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
-@@ -564,13 +598,12 @@ CONFIG_I2C_GPIO=m
- #
- # Miscellaneous I2C Chip support
- #
--# CONFIG_SENSORS_DS1337 is not set
--# CONFIG_SENSORS_DS1374 is not set
- # CONFIG_DS1682 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_PCF8575 is not set
- # CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
- # CONFIG_SENSORS_MAX6875 is not set
- # CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
-@@ -597,9 +630,27 @@ CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_AT25 is not set
- CONFIG_SPI_SPIDEV=m
- # CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+# CONFIG_DEBUG_GPIO is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
- 
-@@ -665,12 +716,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
- #
- # Generic devices
- #
-+CONFIG_SND_AC97_CODEC=m
- # CONFIG_SND_DUMMY is not set
- # CONFIG_SND_MTPAV is not set
- # CONFIG_SND_SERIAL_U16550 is not set
- # CONFIG_SND_MPU401 is not set
- 
- #
-+# AVR32 devices
-+#
-+CONFIG_SND_ATMEL_AC97=m
-+
-+#
- # SPI devices
- #
- CONFIG_SND_AT73C213=m
-@@ -686,9 +743,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
- #
- 
- #
-+# ALSA SoC audio for Freescale SOCs
-+#
-+
-+#
- # Open Sound System
- #
- # CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=m
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
- # CONFIG_USB_ARCH_HAS_HCD is not set
-@@ -698,10 +760,6 @@ CONFIG_USB_SUPPORT=y
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
--
--#
--# USB Gadget Support
--#
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
-@@ -729,27 +787,31 @@ CONFIG_USB_FILE_STORAGE=m
- # CONFIG_USB_FILE_STORAGE_TEST is not set
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
--CONFIG_MMC=m
-+# CONFIG_USB_G_PRINTER is not set
-+CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
- 
- #
- # MMC/SD Card Drivers
- #
--CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_BLOCK=y
- # CONFIG_MMC_BLOCK_BOUNCE is not set
- # CONFIG_SDIO_UART is not set
- 
- #
- # MMC/SD Host Controller Drivers
- #
-+CONFIG_MMC_ATMELMCI=y
- CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
- CONFIG_LEDS_CLASS=y
- 
- #
- # LED drivers
- #
-+CONFIG_LEDS_ATMEL_PWM=m
- CONFIG_LEDS_GPIO=y
- 
- #
-@@ -786,19 +848,22 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
- # CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
- 
- #
- # SPI RTC drivers
- #
--# CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
- 
- #
- # Platform RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1511 is not set
- # CONFIG_RTC_DRV_DS1553 is not set
--# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-@@ -816,13 +881,13 @@ CONFIG_UIO=m
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
-@@ -830,12 +895,10 @@ CONFIG_JBD=m
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
- # CONFIG_OCFS2_FS is not set
--# CONFIG_MINIX_FS is not set
--# CONFIG_ROMFS_FS is not set
-+# CONFIG_DNOTIFY is not set
- CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
--# CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
- CONFIG_FUSE_FS=m
-@@ -866,7 +929,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
- 
- #
- # Miscellaneous filesystems
-@@ -891,8 +954,10 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- # CONFIG_NETWORK_FILESYSTEMS is not set
-@@ -943,11 +1008,6 @@ CONFIG_NLS_ISO8859_1=m
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=m
- # CONFIG_DLM is not set
--CONFIG_INSTRUMENTATION=y
--CONFIG_PROFILING=y
--CONFIG_OPROFILE=m
--CONFIG_KPROBES=y
--# CONFIG_MARKERS is not set
- 
- #
- # Kernel hacking
-@@ -965,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
- CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
-+# CONFIG_SLUB_STATS is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-@@ -981,9 +1042,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_LIST is not set
- # CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
--CONFIG_FORCED_INLINING=y
- # CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
- # CONFIG_LKDTM is not set
- # CONFIG_FAULT_INJECTION is not set
- # CONFIG_SAMPLES is not set
-@@ -1009,6 +1071,7 @@ CONFIG_CRC7=m
- CONFIG_AUDIT_GENERIC=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
---- a/arch/avr32/configs/atstk1004_defconfig
-+++ b/arch/avr32/configs/atstk1004_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24-rc7
--# Wed Jan  9 23:04:20 2008
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:37:49 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
--CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
-@@ -34,15 +34,15 @@ CONFIG_LOCALVERSION=""
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_USER_NS is not set
--# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
--# CONFIG_FAIR_GROUP_SCHED is not set
-+# CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
- # CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
- # CONFIG_BLK_DEV_INITRD is not set
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -54,24 +54,37 @@ CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
- CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
- # CONFIG_FUTEX is not set
- # CONFIG_EPOLL is not set
- # CONFIG_SIGNALFD is not set
-+# CONFIG_TIMERFD is not set
- # CONFIG_EVENTFD is not set
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
- # CONFIG_SLAB is not set
- # CONFIG_SLUB is not set
- CONFIG_SLOB=y
-+# CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+# CONFIG_PROC_PAGE_MONITOR is not set
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=1
- # CONFIG_MODULES is not set
- # CONFIG_BLOCK is not set
-+CONFIG_CLASSIC_RCU=y
- 
- #
- # System Type and features
- #
-+# CONFIG_TICK_ONESHOT is not set
-+# CONFIG_NO_HZ is not set
-+# CONFIG_HIGH_RES_TIMERS is not set
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-@@ -83,10 +96,14 @@ CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATSTK1002 is not set
- # CONFIG_BOARD_ATSTK1003 is not set
- CONFIG_BOARD_ATSTK1004=y
-+# CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED is not set
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
- CONFIG_LOADER_U_BOOT=y
- 
- #
-@@ -95,6 +112,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP700X_32_BIT_SMC is not set
- CONFIG_AP700X_16_BIT_SMC=y
- # CONFIG_AP700X_8_BIT_SMC is not set
-+# CONFIG_GPIO_DEV is not set
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -120,34 +138,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- CONFIG_ZONE_DMA_FLAG=0
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
-+# CONFIG_NMI_DEBUGGING is not set
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
- CONFIG_CMDLINE=""
- 
- #
- # Power management options
- #
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+# CONFIG_PM is not set
- 
- #
- # CPU Frequency scaling
- #
--CONFIG_CPU_FREQ=y
--CONFIG_CPU_FREQ_TABLE=y
--# CONFIG_CPU_FREQ_DEBUG is not set
--# CONFIG_CPU_FREQ_STAT is not set
--CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
--# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
--CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
--# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
--CONFIG_CPU_FREQ_GOV_USERSPACE=y
--CONFIG_CPU_FREQ_GOV_ONDEMAND=y
--# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
--CONFIG_CPU_FREQ_AT32AP=y
-+# CONFIG_CPU_FREQ is not set
- 
- #
- # Bus options
-@@ -222,6 +232,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- #
- # CONFIG_NET_PKTGEN is not set
- # CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
-@@ -321,6 +332,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- # CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
- # CONFIG_MISC_DEVICES is not set
-+# CONFIG_HAVE_IDE is not set
- 
- #
- # SCSI device support
-@@ -358,6 +370,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_PDC is not set
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -365,8 +378,6 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
--# CONFIG_RTC is not set
--# CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_TCG_TPM is not set
- # CONFIG_I2C is not set
-@@ -389,9 +400,24 @@ CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_AT25 is not set
- # CONFIG_SPI_SPIDEV is not set
- # CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+
-+#
-+# I2C GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
- 
-@@ -471,10 +497,6 @@ CONFIG_USB_SUPPORT=y
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
--
--#
--# USB Gadget Support
--#
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
- CONFIG_USB_GADGET_SELECTED=y
-@@ -499,7 +521,9 @@ CONFIG_USB_ETH=y
- # CONFIG_USB_FILE_STORAGE is not set
- # CONFIG_USB_G_SERIAL is not set
- # CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
- # CONFIG_MMC is not set
-+# CONFIG_MEMSTICK is not set
- # CONFIG_NEW_LEDS is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
-@@ -519,15 +543,17 @@ CONFIG_RTC_INTF_DEV=y
- #
- # SPI RTC drivers
- #
--# CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
- 
- #
- # Platform RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1511 is not set
- # CONFIG_RTC_DRV_DS1553 is not set
--# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-@@ -545,9 +571,9 @@ CONFIG_RTC_DRV_AT32AP700X=y
- #
- # File systems
- #
-+# CONFIG_DNOTIFY is not set
- # CONFIG_INOTIFY is not set
- # CONFIG_QUOTA is not set
--# CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
- # CONFIG_FUSE_FS is not set
-@@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_NETWORK_FILESYSTEMS is not set
- # CONFIG_NLS is not set
- # CONFIG_DLM is not set
--# CONFIG_INSTRUMENTATION is not set
- 
- #
- # Kernel hacking
-@@ -616,6 +641,7 @@ CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/avr32/configs/atstk1006_defconfig
-@@ -0,0 +1,1235 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:40:45 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+CONFIG_RELAY=y
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
-+CONFIG_CPU_AT32AP7000=y
-+CONFIG_BOARD_ATSTK1000=y
-+# CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002 is not set
-+# CONFIG_BOARD_ATSTK1003 is not set
-+# CONFIG_BOARD_ATSTK1004 is not set
-+CONFIG_BOARD_ATSTK1006=y
-+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+CONFIG_DW_DMAC=y
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+CONFIG_IPV6=m
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+CONFIG_BRIDGE=m
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+CONFIG_LLC=m
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x8000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=m
-+CONFIG_MTD_M25P80=m
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_ATMEL=y
-+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+CONFIG_MTD_UBI=m
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+CONFIG_MTD_UBI_GLUEBI=y
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=m
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=m
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=m
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+CONFIG_ATA=m
-+# CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_MV is not set
-+CONFIG_PATA_AT32=m
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+CONFIG_TUN=m
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+# CONFIG_PPP_MPPE is not set
-+# CONFIG_PPPOE is not set
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=m
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_VT is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+# CONFIG_DEBUG_GPIO is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+# CONFIG_LOGO is not set
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=m
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+CONFIG_SND_AC97_CODEC=m
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# AVR32 devices
-+#
-+CONFIG_SND_ATMEL_AC97=m
-+
-+#
-+# SPI devices
-+#
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+
-+#
-+# System on Chip audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# SoC Audio support for SuperH
-+#
-+
-+#
-+# ALSA SoC audio for Freescale SOCs
-+#
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=m
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
-+# CONFIG_USB_ARCH_HAS_HCD is not set
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_ATMELMCI=y
-+CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_ATMEL_PWM=m
-+CONFIG_LEDS_GPIO=m
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
-+
-+#
-+# Userspace I/O
-+#
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=m
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_AEAD=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+# CONFIG_CRYPTO_SEQIV is not set
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_ECB is not set
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+CONFIG_CRYPTO_DEFLATE=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_LZO is not set
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=m
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32=y
-+CONFIG_CRC7=m
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/avr32/drivers/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC)			+= dw-dmac.o
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.c
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+
-+#include "dw-dmac.h"
-+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
-+
-+enum {
-+	CH_STATE_FREE = 0,
-+	CH_STATE_ALLOCATED,
-+	CH_STATE_BUSY,
-+};
-+
-+struct dw_dma_lli {
-+	dma_addr_t	sar;
-+	dma_addr_t	dar;
-+	dma_addr_t	llp;
-+	u32		ctllo;
-+	u32		ctlhi;
-+	u32		sstat;
-+	u32		dstat;
-+};
-+
-+struct dw_dma_block {
-+	struct dw_dma_lli *lli_vaddr;
-+	dma_addr_t lli_dma_addr;
-+};
-+
-+struct dw_dma_channel {
-+	unsigned int state;
-+        int is_cyclic;
-+	struct dma_request_sg *req_sg;
-+	struct dma_request_cyclic *req_cyclic;
-+	unsigned int nr_blocks;
-+	int direction;
-+	struct dw_dma_block *block;
-+};
-+
-+struct dw_dma_controller {
-+	spinlock_t lock;
-+	void * __iomem	regs;
-+	struct dma_pool *lli_pool;
-+	struct clk *hclk;
-+	struct dma_controller dma;
-+	struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
-+
-+#define dmac_writel_hi(dmac, reg, value) \
-+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+	__raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+	__raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+	__raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+			       + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+	__raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+	dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+	dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
-+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&dmac->lock, flags);
-+	for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+		if (dmac->channel[i].state == CH_STATE_FREE)
-+			break;
-+
-+	if (i < DMAC_NR_CHANNELS) {
-+		chan = &dmac->channel[i];
-+		chan->state = CH_STATE_ALLOCATED;
-+	} else {
-+		i = -EBUSY;
-+	}
-+
-+	spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+	return i;
-+}
-+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS
-+	       || dmac->channel[channel].state != CH_STATE_ALLOCATED);
-+
-+	dmac->channel[channel].state = CH_STATE_FREE;
-+}
-+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+					    unsigned int nr_blocks)
-+{
-+	struct dw_dma_block *block;
-+	void *p;
-+	unsigned int i;
-+
-+	block = kmalloc(nr_blocks * sizeof(*block),
-+			GFP_KERNEL);
-+	if (unlikely(!block))
-+		return NULL;
-+
-+	for (i = 0; i < nr_blocks; i++) {
-+		p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+				   &block[i].lli_dma_addr);
-+		block[i].lli_vaddr = p;
-+		if (unlikely(!p))
-+			goto fail;
-+	}
-+
-+	return block;
-+
-+fail:
-+	for (i = 0; i < nr_blocks; i++) {
-+		if (!block[i].lli_vaddr)
-+			break;
-+		dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+			      block[i].lli_dma_addr);
-+	}
-+	kfree(block);
-+	return NULL;
-+}
-+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+			    struct dw_dma_channel *chan)
-+{
-+	unsigned int i;
-+
-+	if (chan->nr_blocks > 1) {
-+		for (i = 0; i < chan->nr_blocks; i++)
-+			dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+				      chan->block[i].lli_dma_addr);
-+		kfree(chan->block);
-+	}
-+
-+	chan->state = CH_STATE_ALLOCATED;
-+}
-+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+				   struct dma_request_sg *req)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+	unsigned long ctlhi, ctllo, cfghi, cfglo;
-+	unsigned long block_size;
-+	unsigned int nr_blocks;
-+	int ret, i, direction;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&dmac->lock, flags);
-+
-+	ret = -EINVAL;
-+	if (req->req.channel >= DMAC_NR_CHANNELS
-+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+	    || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+		spin_unlock_irqrestore(&dmac->lock, flags);
-+		return -EINVAL;
-+	}
-+
-+	chan = &dmac->channel[req->req.channel];
-+	chan->state = CH_STATE_BUSY;
-+	chan->req_sg = req;
-+	chan->is_cyclic = 0;
-+
-+	/*
-+	 * We have marked the channel as busy, so no need to keep the
-+	 * lock as long as we only touch the channel-specific
-+	 * registers
-+	 */
-+	spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+	/*
-+	 * There may be limitations in the driver and/or the DMA
-+	 * controller that prevents us from sending a whole
-+	 * scatterlist item in one go.  Taking this into account,
-+	 * calculate the number of block transfers we need to set up.
-+	 *
-+	 * FIXME: Let the peripheral driver know about the maximum
-+	 * block size we support. We really don't want to use a
-+	 * different block size than what was suggested by the
-+	 * peripheral.
-+	 *
-+	 * Each block will get its own Linked List Item (LLI) below.
-+	 */
-+	block_size = req->block_size;
-+	nr_blocks = req->nr_blocks;
-+	pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+		 block_size, nr_blocks, req->nr_sg);
-+
-+	BUG_ON(nr_blocks == 0);
-+	chan->nr_blocks = nr_blocks;
-+
-+	ret = -EINVAL;
-+	cfglo = cfghi = 0;
-+	switch (req->direction) {
-+	case DMA_DIR_MEM_TO_PERIPH:
-+		direction = DMA_TO_DEVICE;
-+		cfghi = req->periph_id << (43 - 32);
-+		break;
-+
-+	case DMA_DIR_PERIPH_TO_MEM:
-+		direction = DMA_FROM_DEVICE;
-+		cfghi = req->periph_id << (39 - 32);
-+		break;
-+	default:
-+		goto out_unclaim_channel;
-+	}
-+
-+        chan->direction = direction;
-+
-+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+	ctlhi = block_size >> req->width;
-+	ctllo = ((req->direction << 20)
-+		 // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+		 | (req->width << 4) | (req->width << 1)
-+		 | (1 << 0));		 // interrupt enable
-+
-+	if (nr_blocks == 1) {
-+		/* Only one block: No need to use block chaining */
-+		if (direction == DMA_TO_DEVICE) {
-+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+					    req->sg->dma_address);
-+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+					    req->data_reg);
-+			ctllo |= 2 << 7; // no dst increment
-+		} else {
-+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+					    req->data_reg);
-+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+					    req->sg->dma_address);
-+			ctllo |= 2 << 9; // no src increment
-+		}
-+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+		pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+	} else {
-+		struct dw_dma_lli *lli, *lli_prev = NULL;
-+		int j = 0, offset = 0;
-+
-+		ret = -ENOMEM;
-+		chan->block = allocate_blocks(dmac, nr_blocks);
-+		if (!chan->block)
-+			goto out_unclaim_channel;
-+
-+		if (direction == DMA_TO_DEVICE)
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+		else
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+		/*
-+		 * Map scatterlist items to blocks. One scatterlist
-+		 * item may need more than one block for the reasons
-+		 * mentioned above.
-+		 */
-+		for (i = 0; i < nr_blocks; i++) {
-+			lli = chan->block[i].lli_vaddr;
-+			if (lli_prev) {
-+				lli_prev->llp = chan->block[i].lli_dma_addr;
-+				pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+					 i - 1, chan->block[i - 1].lli_vaddr,
-+					 chan->block[i - 1].lli_dma_addr,
-+					 lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+					 lli_prev->ctllo, lli_prev->ctlhi);
-+			}
-+			lli->llp = 0;
-+			lli->ctllo = ctllo;
-+			lli->ctlhi = ctlhi;
-+			if (direction == DMA_TO_DEVICE) {
-+				lli->sar = req->sg[j].dma_address + offset;
-+				lli->dar = req->data_reg;
-+			} else {
-+				lli->sar = req->data_reg;
-+				lli->dar = req->sg[j].dma_address + offset;
-+			}
-+			lli_prev = lli;
-+
-+			offset += block_size;
-+			if (offset > req->sg[j].length) {
-+				j++;
-+				offset = 0;
-+			}
-+		}
-+
-+		pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+			 i - 1, chan->block[i - 1].lli_vaddr,
-+			 chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+			 lli_prev->dar, lli_prev->llp,
-+			 lli_prev->ctllo, lli_prev->ctlhi);
-+
-+		/*
-+		 * SAR, DAR and CTL are initialized from the LLI. We
-+		 * only have to enable the LLI bits in CTL.
-+		 */
-+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+				    chan->block[0].lli_dma_addr);
-+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+	}
-+
-+	set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+	if (req->req.block_complete)
-+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+	else
-+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+	return 0;
-+
-+out_unclaim_channel:
-+	chan->state = CH_STATE_ALLOCATED;
-+	return ret;
-+}
-+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+                                       struct dma_request_cyclic *req)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+	unsigned long ctlhi, ctllo, cfghi, cfglo;
-+	unsigned long block_size;
-+	int ret, i, direction;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&dmac->lock, flags);
-+
-+        block_size = (req->buffer_size/req->periods) >> req->width;
-+
-+	ret = -EINVAL;
-+	if (req->req.channel >= DMAC_NR_CHANNELS
-+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+            || (req->periods == 0)
-+	    || block_size > DMAC_MAX_BLOCKSIZE) {
-+		spin_unlock_irqrestore(&dmac->lock, flags);
-+		return -EINVAL;
-+	}
-+
-+	chan = &dmac->channel[req->req.channel];
-+	chan->state = CH_STATE_BUSY;
-+	chan->is_cyclic = 1;
-+        chan->req_cyclic = req;
-+
-+	/*
-+	 * We have marked the channel as busy, so no need to keep the
-+	 * lock as long as we only touch the channel-specific
-+	 * registers
-+	 */
-+	spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+	/*
-+          Setup
-+	 */
-+	BUG_ON(req->buffer_size % req->periods);
-+	/* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
-+
-+	chan->nr_blocks = req->periods;
-+
-+	ret = -EINVAL;
-+	cfglo = cfghi = 0;
-+	switch (req->direction) {
-+	case DMA_DIR_MEM_TO_PERIPH:
-+		direction = DMA_TO_DEVICE;
-+		cfghi = req->periph_id << (43 - 32);
-+		break;
-+
-+	case DMA_DIR_PERIPH_TO_MEM:
-+		direction = DMA_FROM_DEVICE;
-+		cfghi = req->periph_id << (39 - 32);
-+		break;
-+	default:
-+		goto out_unclaim_channel;
-+	}
-+
-+        chan->direction = direction;
-+
-+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+	ctlhi = block_size;
-+	ctllo = ((req->direction << 20)
-+		 | (req->width << 4) | (req->width << 1)
-+		 | (1 << 0));		 // interrupt enable
-+
-+        {
-+		struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
-+
-+		ret = -ENOMEM;
-+		chan->block = allocate_blocks(dmac, req->periods);
-+		if (!chan->block)
-+			goto out_unclaim_channel;
-+
-+		if (direction == DMA_TO_DEVICE)
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+		else
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+		/*
-+		 * Set up a linked list items where each period gets
-+		 * an item. The linked list item for the last period
-+		 * points back to the star of the buffer making a
-+		 * cyclic buffer.
-+		 */
-+		for (i = 0; i < req->periods; i++) {
-+			lli = chan->block[i].lli_vaddr;
-+			if (lli_prev) {
-+				lli_prev->llp = chan->block[i].lli_dma_addr;
-+				/* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+				   i - 1, chan->block[i - 1].lli_vaddr,
-+				   chan->block[i - 1].lli_dma_addr,
-+				   lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+				   lli_prev->ctllo, lli_prev->ctlhi);*/
-+			}
-+			lli->llp = 0;
-+			lli->ctllo = ctllo;
-+			lli->ctlhi = ctlhi;
-+			if (direction == DMA_TO_DEVICE) {
-+				lli->sar = req->buffer_start + i*(block_size << req->width);
-+				lli->dar = req->data_reg;
-+			} else {
-+				lli->sar = req->data_reg;
-+				lli->dar = req->buffer_start + i*(block_size << req->width);
-+			}
-+			lli_prev = lli;
-+		}
-+		lli->llp = chan->block[0].lli_dma_addr;
-+
-+		/*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+		  i - 1, chan->block[i - 1].lli_vaddr,
-+		  chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+		  lli_prev->dar, lli_prev->llp,
-+		  lli_prev->ctllo, lli_prev->ctlhi); */
-+
-+		/*
-+		 * SAR, DAR and CTL are initialized from the LLI. We
-+		 * only have to enable the LLI bits in CTL.
-+		 */
-+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+				    chan->block[0].lli_dma_addr);
-+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+	}
-+
-+	clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+	if (req->req.block_complete)
-+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+	else
-+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+	return 0;
-+
-+out_unclaim_channel:
-+	chan->state = CH_STATE_ALLOCATED;
-+	return ret;
-+}
-+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+			      unsigned int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+	set_channel_bit(dmac, CH_EN, channel);
-+
-+	return 0;
-+}
-+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+                                       unsigned int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+        dma_addr_t current_pos;
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+        chan = &dmac->channel[channel];
-+
-+	switch (chan->direction) {
-+	case DMA_TO_DEVICE:
-+		current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+		break;
-+	case DMA_FROM_DEVICE:
-+		current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+		break;
-+	default:
-+		return 0;
-+	}
-+
-+
-+        if (!current_pos) {
-+		if (chan->is_cyclic) {
-+			current_pos = chan->req_cyclic->buffer_start;
-+		} else {
-+			current_pos = chan->req_sg->sg->dma_address;
-+		}
-+	}
-+
-+	return current_pos;
-+}
-+
-+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+                             unsigned int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+	chan = &dmac->channel[channel];
-+	pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+		 chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+		 dmac_chan_readl_lo(dmac, channel, DAR),
-+		 dmac_chan_readl_lo(dmac, channel, LLP),
-+		 dmac_chan_readl_hi(dmac, channel, CTL),
-+		 dmac_chan_readl_lo(dmac, channel, CTL));
-+
-+	if (chan->state == CH_STATE_BUSY) {
-+		clear_channel_bit(dmac, CH_EN, channel);
-+		cleanup_channel(dmac, &dmac->channel[channel]);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+	struct dw_dma_channel *chan;
-+	unsigned long status, chanid;
-+
-+	status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+
-+	while (status) {
-+		struct dma_request *req;
-+		chanid = __ffs(status);
-+		chan = &dmac->channel[chanid];
-+
-+                if (chan->is_cyclic) {
-+			BUG_ON(!chan->req_cyclic
-+			       || !chan->req_cyclic->req.block_complete);
-+			req = &chan->req_cyclic->req;
-+                } else {
-+			BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+			req = &chan->req_sg->req;
-+                }
-+		dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+		req->block_complete(req);
-+		status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+	}
-+}
-+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+	struct dw_dma_channel *chan;
-+	struct dma_request *req;
-+	unsigned long status, chanid;
-+
-+	status = dmac_readl_lo(dmac, STATUS_XFER);
-+
-+	while (status) {
-+		chanid = __ffs(status);
-+		chan = &dmac->channel[chanid];
-+
-+		dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
-+
-+                req = &chan->req_sg->req;
-+                BUG_ON(!req);
-+                cleanup_channel(dmac, chan);
-+                if (req->xfer_complete)
-+			req->xfer_complete(req);
-+
-+		status = dmac_readl_lo(dmac, STATUS_XFER);
-+	}
-+}
-+
-+static void dmac_error(struct dw_dma_controller *dmac)
-+{
-+	struct dw_dma_channel *chan;
-+	unsigned long status, chanid;
-+
-+	status = dmac_readl_lo(dmac, STATUS_ERROR);
-+
-+	while (status) {
-+		struct dma_request *req;
-+
-+		chanid = __ffs(status);
-+		chan = &dmac->channel[chanid];
-+
-+		dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+		clear_channel_bit(dmac, CH_EN, chanid);
-+
-+                if (chan->is_cyclic) {
-+			BUG_ON(!chan->req_cyclic);
-+			req = &chan->req_cyclic->req;
-+                } else {
-+			BUG_ON(!chan->req_sg);
-+			req = &chan->req_sg->req;
-+                }
-+
-+		cleanup_channel(dmac, chan);
-+		if (req->error)
-+			req->error(req);
-+
-+		status = dmac_readl_lo(dmac, STATUS_XFER);
-+	}
-+}
-+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
-+{
-+	struct dw_dma_controller *dmac = dev_id;
-+	unsigned long status;
-+	int ret = IRQ_NONE;
-+
-+	spin_lock(&dmac->lock);
-+
-+	status = dmac_readl_lo(dmac, STATUS_INT);
-+
-+	while (status) {
-+		ret = IRQ_HANDLED;
-+		if (status & 0x10)
-+			dmac_error(dmac);
-+		if (status & 0x02)
-+			dmac_block_complete(dmac);
-+		if (status & 0x01)
-+			dmac_xfer_complete(dmac);
-+
-+		status = dmac_readl_lo(dmac, STATUS_INT);
-+	}
-+
-+	spin_unlock(&dmac->lock);
-+	return ret;
-+}
-+
-+static int __devinit dmac_probe(struct platform_device *pdev)
-+{
-+	struct dw_dma_controller *dmac;
-+	struct resource *regs;
-+	int ret;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+
-+	dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+	if (!dmac)
-+		return -ENOMEM;
-+	memset(dmac, 0, sizeof(*dmac));
-+
-+	dmac->hclk = clk_get(&pdev->dev, "hclk");
-+	if (IS_ERR(dmac->hclk)) {
-+		ret = PTR_ERR(dmac->hclk);
-+		goto out_free_dmac;
-+	}
-+	clk_enable(dmac->hclk);
-+
-+	ret = -ENOMEM;
-+	dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+					 sizeof(struct dw_dma_lli), 4, 0);
-+	if (!dmac->lli_pool)
-+		goto out_disable_clk;
-+
-+	spin_lock_init(&dmac->lock);
-+	dmac->dma.dev = &pdev->dev;
-+	dmac->dma.alloc_channel = dmac_alloc_channel;
-+	dmac->dma.release_channel = dmac_release_channel;
-+	dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+	dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+	dmac->dma.start_request = dmac_start_request;
-+	dmac->dma.stop_request = dmac_stop_request;
-+	dmac->dma.get_current_pos = dmac_get_current_pos;
-+
-+	dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!dmac->regs)
-+		goto out_free_pool;
-+
-+	ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+			  IRQF_SAMPLE_RANDOM, pdev->name, dmac);
-+	if (ret)
-+		goto out_unmap_regs;
-+
-+	/* Enable the DMA controller */
-+	dmac_writel_lo(dmac, CFG, 1);
-+
-+	register_dma_controller(&dmac->dma);
-+
-+	printk(KERN_INFO
-+	       "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+	       dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
-+
-+	return 0;
-+
-+out_unmap_regs:
-+	iounmap(dmac->regs);
-+out_free_pool:
-+	dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+	clk_disable(dmac->hclk);
-+	clk_put(dmac->hclk);
-+out_free_dmac:
-+	kfree(dmac);
-+	return ret;
-+}
-+
-+static struct platform_driver dmac_driver = {
-+	.probe		= dmac_probe,
-+	.driver		= {
-+		.name		= "dmaca",
-+	},
-+};
-+
-+static int __init dmac_init(void)
-+{
-+	return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
-+
-+static void __exit dmac_exit(void)
-+{
-+	platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
-+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
-+
-+#define DW_DMAC_CFG		0x398
-+#define DW_DMAC_CH_EN		0x3a0
-+
-+#define DW_DMAC_STATUS_XFER	0x2e8
-+#define DW_DMAC_STATUS_BLOCK	0x2f0
-+#define DW_DMAC_STATUS_ERROR	0x308
-+
-+#define DW_DMAC_MASK_XFER	0x310
-+#define DW_DMAC_MASK_BLOCK	0x318
-+#define DW_DMAC_MASK_ERROR	0x330
-+
-+#define DW_DMAC_CLEAR_XFER	0x338
-+#define DW_DMAC_CLEAR_BLOCK	0x340
-+#define DW_DMAC_CLEAR_ERROR	0x358
-+
-+#define DW_DMAC_STATUS_INT	0x360
-+
-+#define DW_DMAC_CHAN_SAR	0x000
-+#define DW_DMAC_CHAN_DAR	0x008
-+#define DW_DMAC_CHAN_LLP	0x010
-+#define DW_DMAC_CHAN_CTL	0x018
-+#define DW_DMAC_CHAN_SSTAT	0x020
-+#define DW_DMAC_CHAN_DSTAT	0x028
-+#define DW_DMAC_CHAN_SSTATAR	0x030
-+#define DW_DMAC_CHAN_DSTATAR	0x038
-+#define DW_DMAC_CHAN_CFG	0x040
-+#define DW_DMAC_CHAN_SGR	0x048
-+#define DW_DMAC_CHAN_DSR	0x050
-+
-+#endif /* __AVR32_DW_DMAC_H__ */
---- a/arch/avr32/kernel/Makefile
-+++ b/arch/avr32/kernel/Makefile
-@@ -9,6 +9,7 @@ obj-y				+= syscall_table.o syscall-stub
- obj-y				+= setup.o traps.o semaphore.o ocd.o ptrace.o
- obj-y				+= signal.o sys_avr32.o process.o time.o
- obj-y				+= init_task.o switch_to.o cpu.o
-+obj-y				+= dma-controller.o
- obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES)		+= kprobes.o
- obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
---- a/arch/avr32/kernel/avr32_ksyms.c
-+++ b/arch/avr32/kernel/avr32_ksyms.c
-@@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64);
-  */
- EXPORT_SYMBOL(memset);
- EXPORT_SYMBOL(memcpy);
-+
- EXPORT_SYMBOL(clear_page);
-+EXPORT_SYMBOL(copy_page);
- 
- /*
-  * Userspace access stuff.
-@@ -41,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user);
- EXPORT_SYMBOL(__strncpy_from_user);
- EXPORT_SYMBOL(clear_user);
- EXPORT_SYMBOL(__clear_user);
-+EXPORT_SYMBOL(strnlen_user);
-+
- EXPORT_SYMBOL(csum_partial);
- EXPORT_SYMBOL(csum_partial_copy_generic);
- 
---- /dev/null
-+++ b/arch/avr32/kernel/dma-controller.c
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
-+
-+static LIST_HEAD(controllers);
-+
-+int register_dma_controller(struct dma_controller *dmac)
-+{
-+	static int next_id;
-+
-+	dmac->id = next_id++;
-+	list_add_tail(&dmac->list, &controllers);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(register_dma_controller);
-+
-+struct dma_controller *find_dma_controller(int id)
-+{
-+	struct dma_controller *dmac;
-+
-+	list_for_each_entry(dmac, &controllers, list)
-+		if (dmac->id == id)
-+			return dmac;
-+	return NULL;
-+}
-+EXPORT_SYMBOL(find_dma_controller);
---- a/arch/avr32/kernel/entry-avr32b.S
-+++ b/arch/avr32/kernel/entry-avr32b.S
-@@ -74,50 +74,41 @@ exception_vectors:
- 	.align	2
- 	bral	do_dtlb_modified
- 
--	/*
--	 * r0 :	PGD/PT/PTE
--	 * r1 : Offending address
--	 * r2 : Scratch register
--	 * r3 : Cause (5, 12 or 13)
--	 */
- #define	tlbmiss_save	pushm	r0-r3
- #define tlbmiss_restore	popm	r0-r3
- 
--	.section .tlbx.ex.text,"ax",@progbits
-+	.org	0x50
- 	.global	itlb_miss
- itlb_miss:
- 	tlbmiss_save
- 	rjmp	tlb_miss_common
- 
--	.section .tlbr.ex.text,"ax",@progbits
-+	.org	0x60
- dtlb_miss_read:
- 	tlbmiss_save
- 	rjmp	tlb_miss_common
- 
--	.section .tlbw.ex.text,"ax",@progbits
-+	.org	0x70
- dtlb_miss_write:
- 	tlbmiss_save
- 
- 	.global	tlb_miss_common
-+	.align	2
- tlb_miss_common:
- 	mfsr	r0, SYSREG_TLBEAR
- 	mfsr	r1, SYSREG_PTBR
- 
--	/* Is it the vmalloc space? */
--	bld	r0, 31
--	brcs	handle_vmalloc_miss
--
--	/* First level lookup */
-+	/*
-+	 * First level lookup: The PGD contains virtual pointers to
-+	 * the second-level page tables, but they may be NULL if not
-+	 * present.
-+	 */
- pgtbl_lookup:
- 	lsr	r2, r0, PGDIR_SHIFT
- 	ld.w	r3, r1[r2 << 2]
- 	bfextu	r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
--	bld	r3, _PAGE_BIT_PRESENT
--	brcc	page_table_not_present
--
--	/* Translate to virtual address in P1. */
--	andl	r3, 0xf000
--	sbr	r3, 31
-+	cp.w	r3, 0
-+	breq	page_table_not_present
- 
- 	/* Second level lookup */
- 	ld.w	r2, r3[r1 << 2]
-@@ -148,16 +139,55 @@ pgtbl_lookup:
- 	tlbmiss_restore
- 	rete
- 
--handle_vmalloc_miss:
--	/* Simply do the lookup in init's page table */
-+	/* The slow path of the TLB miss handler */
-+	.align	2
-+page_table_not_present:
-+	/* Do we need to synchronize with swapper_pg_dir? */
-+	bld	r0, 31
-+	brcs	sync_with_swapper_pg_dir
-+
-+page_not_present:
-+	tlbmiss_restore
-+	sub	sp, 4
-+	stmts	--sp, r0-lr
-+	rcall	save_full_context_ex
-+	mfsr	r12, SYSREG_ECR
-+	mov	r11, sp
-+	rcall	do_page_fault
-+	rjmp	ret_from_exception
-+
-+	.align	2
-+sync_with_swapper_pg_dir:
-+	/*
-+	 * If swapper_pg_dir contains a non-NULL second-level page
-+	 * table pointer, copy it into the current PGD. If not, we
-+	 * must handle it as a full-blown page fault.
-+	 *
-+	 * Jumping back to pgtbl_lookup causes an unnecessary lookup,
-+	 * but it is guaranteed to be a cache hit, it won't happen
-+	 * very often, and we absolutely do not want to sacrifice any
-+	 * performance in the fast path in order to improve this.
-+	 */
- 	mov	r1, lo(swapper_pg_dir)
- 	orh	r1, hi(swapper_pg_dir)
-+	ld.w	r3, r1[r2 << 2]
-+	cp.w	r3, 0
-+	breq	page_not_present
-+	mfsr	r1, SYSREG_PTBR
-+	st.w	r1[r2 << 2], r3
- 	rjmp	pgtbl_lookup
- 
-+	/*
-+	 * We currently have two bytes left at this point until we
-+	 * crash into the system call handler...
-+	 *
-+	 * Don't worry, the assembler will let us know.
-+	 */
-+
- 
- 	/* ---                    System Call                    --- */
- 
--	.section .scall.text,"ax",@progbits
-+	.org	0x100
- system_call:
- #ifdef CONFIG_PREEMPT
- 	mask_interrupts
-@@ -266,18 +296,6 @@ syscall_exit_work:
- 	brcc	syscall_exit_cont
- 	rjmp	enter_monitor_mode
- 
--	/* The slow path of the TLB miss handler */
--page_table_not_present:
--page_not_present:
--	tlbmiss_restore
--	sub	sp, 4
--	stmts	--sp, r0-lr
--	rcall	save_full_context_ex
--	mfsr	r12, SYSREG_ECR
--	mov	r11, sp
--	rcall	do_page_fault
--	rjmp	ret_from_exception
--
- 	/* This function expects to find offending PC in SYSREG_RAR_EX */
- 	.type	save_full_context_ex, @function
- 	.align	2
-@@ -741,26 +759,6 @@ irq_level\level:
- 
- 	.section .irq.text,"ax",@progbits
- 
--.global cpu_idle_sleep
--cpu_idle_sleep:
--	mask_interrupts
--	get_thread_info r8
--	ld.w	r9, r8[TI_flags]
--	bld	r9, TIF_NEED_RESCHED
--	brcs	cpu_idle_enable_int_and_exit
--	sbr	r9, TIF_CPU_GOING_TO_SLEEP
--	st.w	r8[TI_flags], r9
--	unmask_interrupts
--	sleep 0
--cpu_idle_skip_sleep:
--	mask_interrupts
--	ld.w	r9, r8[TI_flags]
--	cbr	r9, TIF_CPU_GOING_TO_SLEEP
--	st.w	r8[TI_flags], r9
--cpu_idle_enable_int_and_exit:
--	unmask_interrupts
--	retal	r12
--
- 	.global	irq_level0
- 	.global	irq_level1
- 	.global	irq_level2
---- a/arch/avr32/kernel/process.c
-+++ b/arch/avr32/kernel/process.c
-@@ -18,11 +18,11 @@
- #include <asm/sysreg.h>
- #include <asm/ocd.h>
- 
-+#include <asm/arch/pm.h>
-+
- void (*pm_power_off)(void) = NULL;
- EXPORT_SYMBOL(pm_power_off);
- 
--extern void cpu_idle_sleep(void);
--
- /*
-  * This file handles the architecture-dependent parts of process handling..
-  */
-@@ -54,6 +54,8 @@ void machine_halt(void)
- 
- void machine_power_off(void)
- {
-+	if (pm_power_off)
-+		pm_power_off();
- }
- 
- void machine_restart(char *cmd)
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -274,6 +274,8 @@ static int __init early_parse_fbmem(char
- 			printk(KERN_WARNING
- 			       "Failed to allocate framebuffer memory\n");
- 			fbmem_size = 0;
-+		} else {
-+			memset(__va(fbmem_start), 0, fbmem_size);
- 		}
- 	}
- 
---- a/arch/avr32/kernel/signal.c
-+++ b/arch/avr32/kernel/signal.c
-@@ -93,6 +93,9 @@ asmlinkage int sys_rt_sigreturn(struct p
- 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
- 		goto badframe;
- 
-+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
-+		goto badframe;
-+
- 	pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n",
- 		 regs->pc, regs->lr, regs->sp);
- 
---- a/arch/avr32/kernel/time.c
-+++ b/arch/avr32/kernel/time.c
-@@ -1,233 +1,147 @@
- /*
-  * Copyright (C) 2004-2007 Atmel Corporation
-  *
-- * Based on MIPS implementation arch/mips/kernel/time.c
-- *   Copyright 2001 MontaVista Software Inc.
-- *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License version 2 as
-  * published by the Free Software Foundation.
-  */
--
- #include <linux/clk.h>
--#include <linux/clocksource.h>
--#include <linux/time.h>
--#include <linux/module.h>
-+#include <linux/clockchips.h>
-+#include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
--#include <linux/kernel_stat.h>
--#include <linux/errno.h>
--#include <linux/init.h>
--#include <linux/profile.h>
--#include <linux/sysdev.h>
--#include <linux/err.h>
-+#include <linux/kernel.h>
-+#include <linux/time.h>
- 
--#include <asm/div64.h>
- #include <asm/sysreg.h>
--#include <asm/io.h>
--#include <asm/sections.h>
- 
--/* how many counter cycles in a jiffy? */
--static u32 cycles_per_jiffy;
-+#include <asm/arch/pm.h>
- 
--/* the count value for the next timer interrupt */
--static u32 expirelo;
- 
--cycle_t __weak read_cycle_count(void)
-+static cycle_t read_cycle_count(void)
- {
- 	return (cycle_t)sysreg_read(COUNT);
- }
- 
--struct clocksource __weak clocksource_avr32 = {
--	.name		= "avr32",
--	.rating		= 350,
-+/*
-+ * The architectural cycle count registers are a fine clocksource unless
-+ * the system idle loop use sleep states like "idle":  the CPU cycles
-+ * measured by COUNT (and COMPARE) don't happen during sleep states.
-+ * Their duration also changes if cpufreq changes the CPU clock rate.
-+ * So we rate the clocksource using COUNT as very low quality.
-+ */
-+static struct clocksource counter = {
-+	.name		= "avr32_counter",
-+	.rating		= 50,
- 	.read		= read_cycle_count,
- 	.mask		= CLOCKSOURCE_MASK(32),
- 	.shift		= 16,
- 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
- };
- 
--irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
--
--struct irqaction timer_irqaction = {
--	.handler	= timer_interrupt,
--	.flags		= IRQF_DISABLED,
--	.name		= "timer",
--};
--
--/*
-- * By default we provide the null RTC ops
-- */
--static unsigned long null_rtc_get_time(void)
--{
--	return mktime(2007, 1, 1, 0, 0, 0);
--}
--
--static int null_rtc_set_time(unsigned long sec)
-+static irqreturn_t timer_interrupt(int irq, void *dev_id)
- {
--	return 0;
--}
--
--static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
--static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
-+	struct clock_event_device *evdev = dev_id;
- 
--static void avr32_timer_ack(void)
--{
--	u32 count;
--
--	/* Ack this timer interrupt and set the next one */
--	expirelo += cycles_per_jiffy;
--	/* setting COMPARE to 0 stops the COUNT-COMPARE */
--	if (expirelo == 0) {
--		sysreg_write(COMPARE, expirelo + 1);
--	} else {
--		sysreg_write(COMPARE, expirelo);
--	}
-+	/*
-+	 * Disable the interrupt until the clockevent subsystem
-+	 * reprograms it.
-+	 */
-+	sysreg_write(COMPARE, 0);
- 
--	/* Check to see if we have missed any timer interrupts */
--	count = sysreg_read(COUNT);
--	if ((count - expirelo) < 0x7fffffff) {
--		expirelo = count + cycles_per_jiffy;
--		sysreg_write(COMPARE, expirelo);
--	}
-+	evdev->event_handler(evdev);
-+	return IRQ_HANDLED;
- }
- 
--int __weak avr32_hpt_init(void)
--{
--	int ret;
--	unsigned long mult, shift, count_hz;
--
--	count_hz = clk_get_rate(boot_cpu_data.clk);
--	shift = clocksource_avr32.shift;
--	mult = clocksource_hz2mult(count_hz, shift);
--	clocksource_avr32.mult = mult;
--
--	{
--		u64 tmp;
--
--		tmp = TICK_NSEC;
--		tmp <<= shift;
--		tmp += mult / 2;
--		do_div(tmp, mult);
--
--		cycles_per_jiffy = tmp;
--	}
-+static struct irqaction timer_irqaction = {
-+	.handler	= timer_interrupt,
-+	.flags		= IRQF_TIMER | IRQF_DISABLED,
-+	.name		= "avr32_comparator",
-+};
- 
--	ret = setup_irq(0, &timer_irqaction);
--	if (ret) {
--		pr_debug("timer: could not request IRQ 0: %d\n", ret);
--		return -ENODEV;
--	}
-+static int comparator_next_event(unsigned long delta,
-+		struct clock_event_device *evdev)
-+{
-+	unsigned long	flags;
- 
--	printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
--			"%lu.%03lu MHz\n",
--			((count_hz + 500) / 1000) / 1000,
--			((count_hz + 500) / 1000) % 1000);
-+	raw_local_irq_save(flags);
- 
--	return 0;
--}
-+	/* The time to read COUNT then update COMPARE must be less
-+	 * than the min_delta_ns value for this clockevent source.
-+	 */
-+	sysreg_write(COMPARE, (sysreg_read(COUNT) + delta) ? : 1);
- 
--/*
-- * Taken from MIPS c0_hpt_timer_init().
-- *
-- * The reason COUNT is written twice is probably to make sure we don't get any
-- * timer interrupts while we are messing with the counter.
-- */
--int __weak avr32_hpt_start(void)
--{
--	u32 count = sysreg_read(COUNT);
--	expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
--	sysreg_write(COUNT, expirelo - cycles_per_jiffy);
--	sysreg_write(COMPARE, expirelo);
--	sysreg_write(COUNT, count);
-+	raw_local_irq_restore(flags);
- 
- 	return 0;
- }
- 
--/*
-- * local_timer_interrupt() does profiling and process accounting on a
-- * per-CPU basis.
-- *
-- * In UP mode, it is invoked from the (global) timer_interrupt.
-- */
--void local_timer_interrupt(int irq, void *dev_id)
-+static void comparator_mode(enum clock_event_mode mode,
-+		struct clock_event_device *evdev)
- {
--	if (current->pid)
--		profile_tick(CPU_PROFILING);
--	update_process_times(user_mode(get_irq_regs()));
-+	switch (mode) {
-+	case CLOCK_EVT_MODE_ONESHOT:
-+		pr_debug("%s: start\n", evdev->name);
-+		/* FALLTHROUGH */
-+	case CLOCK_EVT_MODE_RESUME:
-+		cpu_disable_idle_sleep();
-+		break;
-+	case CLOCK_EVT_MODE_UNUSED:
-+	case CLOCK_EVT_MODE_SHUTDOWN:
-+		sysreg_write(COMPARE, 0);
-+		pr_debug("%s: stop\n", evdev->name);
-+		cpu_enable_idle_sleep();
-+		break;
-+	default:
-+		BUG();
-+	}
- }
- 
--irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
--{
--	/* ack timer interrupt and try to set next interrupt */
--	avr32_timer_ack();
--
--	/*
--	 * Call the generic timer interrupt handler
--	 */
--	write_seqlock(&xtime_lock);
--	do_timer(1);
--	write_sequnlock(&xtime_lock);
--
--	/*
--	 * In UP mode, we call local_timer_interrupt() to do profiling
--	 * and process accounting.
--	 *
--	 * SMP is not supported yet.
--	 */
--	local_timer_interrupt(irq, dev_id);
--
--	return IRQ_HANDLED;
--}
-+static struct clock_event_device comparator = {
-+	.name		= "avr32_comparator",
-+	.features	= CLOCK_EVT_FEAT_ONESHOT,
-+	.shift		= 16,
-+	.rating		= 50,
-+	.cpumask	= CPU_MASK_CPU0,
-+	.set_next_event	= comparator_next_event,
-+	.set_mode	= comparator_mode,
-+};
- 
- void __init time_init(void)
- {
-+	unsigned long counter_hz;
- 	int ret;
- 
--	/*
--	 * Make sure we don't get any COMPARE interrupts before we can
--	 * handle them.
--	 */
--	sysreg_write(COMPARE, 0);
--
--	xtime.tv_sec = rtc_get_time();
-+	xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
- 	xtime.tv_nsec = 0;
- 
- 	set_normalized_timespec(&wall_to_monotonic,
- 				-xtime.tv_sec, -xtime.tv_nsec);
- 
--	ret = avr32_hpt_init();
--	if (ret) {
--		pr_debug("timer: failed setup: %d\n", ret);
--		return;
--	}
-+	/* figure rate for counter */
-+	counter_hz = clk_get_rate(boot_cpu_data.clk);
-+	counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
- 
--	ret = clocksource_register(&clocksource_avr32);
-+	ret = clocksource_register(&counter);
- 	if (ret)
- 		pr_debug("timer: could not register clocksource: %d\n", ret);
- 
--	ret = avr32_hpt_start();
--	if (ret) {
--		pr_debug("timer: failed starting: %d\n", ret);
--		return;
--	}
--}
-+	/* setup COMPARE clockevent */
-+	comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
-+	comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
-+	comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
- 
--static struct sysdev_class timer_class = {
--	.name = "timer",
--};
-+	sysreg_write(COMPARE, 0);
-+	timer_irqaction.dev_id = &comparator;
- 
--static struct sys_device timer_device = {
--	.id	= 0,
--	.cls	= &timer_class,
--};
-+	ret = setup_irq(0, &timer_irqaction);
-+	if (ret)
-+		pr_debug("timer: could not request IRQ 0: %d\n", ret);
-+	else {
-+		clockevents_register_device(&comparator);
- 
--static int __init init_timer_sysfs(void)
--{
--	int err = sysdev_class_register(&timer_class);
--	if (!err)
--		err = sysdev_register(&timer_device);
--	return err;
-+		pr_info("%s: irq 0, %lu.%03lu MHz\n", comparator.name,
-+				((counter_hz + 500) / 1000) / 1000,
-+				((counter_hz + 500) / 1000) % 1000);
-+	}
- }
--
--device_initcall(init_timer_sysfs);
---- a/arch/avr32/kernel/vmlinux.lds.S
-+++ b/arch/avr32/kernel/vmlinux.lds.S
-@@ -68,14 +68,6 @@ SECTIONS
- 		_evba = .;
- 		_text = .;
- 		*(.ex.text)
--		. = 0x50;
--		*(.tlbx.ex.text)
--		. = 0x60;
--		*(.tlbr.ex.text)
--		. = 0x70;
--		*(.tlbw.ex.text)
--		. = 0x100;
--		*(.scall.text)
- 		*(.irq.text)
- 		KPROBES_TEXT
- 		TEXT_TEXT
-@@ -107,6 +99,10 @@ SECTIONS
- 		 */
- 		*(.data.init_task)
- 
-+		/* Then, the page-aligned data */
-+		. = ALIGN(PAGE_SIZE);
-+		*(.data.page_aligned)
-+
- 		/* Then, the cacheline aligned data */
- 		. = ALIGN(L1_CACHE_BYTES);
- 		*(.data.cacheline_aligned)
---- a/arch/avr32/lib/io-readsb.S
-+++ b/arch/avr32/lib/io-readsb.S
-@@ -41,7 +41,7 @@ __raw_readsb:
- 2:	sub	r10, -4
- 	reteq	r12
- 
--3:	ld.uh	r8, r12[0]
-+3:	ld.ub	r8, r12[0]
- 	sub	r10, 1
- 	st.b	r11++, r8
- 	brne	3b
---- a/arch/avr32/mach-at32ap/Kconfig
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -26,6 +26,13 @@ config AP700X_8_BIT_SMC
- 
- endchoice
- 
-+config GPIO_DEV
-+	bool "GPIO /dev interface"
-+	select CONFIGFS_FS
-+	default n
-+	help
-+	  Say `Y' to enable a /dev interface to the GPIO pins.
-+
- endmenu
- 
- endif # PLATFORM_AT32AP
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -1,4 +1,9 @@
--obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
--obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o
--obj-$(CONFIG_CPU_AT32AP700X)	+= time-tc.o
-+obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
-+obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
- obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
-+obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
-+obj-$(CONFIG_PM)		+= pm.o
-+
-+ifeq ($(CONFIG_PM_DEBUG),y)
-+CFLAGS_pm.o	+= -DDEBUG
-+endif
---- a/arch/avr32/mach-at32ap/at32ap.c
-+++ /dev/null
-@@ -1,56 +0,0 @@
--/*
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/clk.h>
--#include <linux/err.h>
--#include <linux/init.h>
--#include <linux/platform_device.h>
--
--#include <asm/arch/init.h>
--
--void __init setup_platform(void)
--{
--	at32_clock_init();
--	at32_portmux_init();
--}
--
--static int __init pdc_probe(struct platform_device *pdev)
--{
--	struct clk *pclk, *hclk;
--
--	pclk = clk_get(&pdev->dev, "pclk");
--	if (IS_ERR(pclk)) {
--		dev_err(&pdev->dev, "no pclk defined\n");
--		return PTR_ERR(pclk);
--	}
--	hclk = clk_get(&pdev->dev, "hclk");
--	if (IS_ERR(hclk)) {
--		dev_err(&pdev->dev, "no hclk defined\n");
--		clk_put(pclk);
--		return PTR_ERR(hclk);
--	}
--
--	clk_enable(pclk);
--	clk_enable(hclk);
--
--	dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
--	return 0;
--}
--
--static struct platform_driver pdc_driver = {
--	.probe		= pdc_probe,
--	.driver		= {
--		.name	= "pdc",
--	},
--};
--
--static int __init pdc_init(void)
--{
--	return platform_driver_register(&pdc_driver);
--}
--arch_initcall(pdc_init);
---- a/arch/avr32/mach-at32ap/at32ap700x.c
-+++ b/arch/avr32/mach-at32ap/at32ap700x.c
-@@ -6,11 +6,13 @@
-  * published by the Free Software Foundation.
-  */
- #include <linux/clk.h>
-+#include <linux/delay.h>
- #include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/spi/spi.h>
-+#include <linux/usb/atmel_usba_udc.h>
- 
- #include <asm/io.h>
- #include <asm/irq.h>
-@@ -18,6 +20,7 @@
- #include <asm/arch/at32ap700x.h>
- #include <asm/arch/board.h>
- #include <asm/arch/portmux.h>
-+#include <asm/arch/sram.h>
- 
- #include <video/atmel_lcdc.h>
- 
-@@ -91,25 +94,18 @@ static struct clk devname##_##_name = {	
- 
- static DEFINE_SPINLOCK(pm_lock);
- 
--unsigned long at32ap7000_osc_rates[3] = {
--	[0] = 32768,
--	/* FIXME: these are ATSTK1002-specific */
--	[1] = 20000000,
--	[2] = 12000000,
--};
-+static struct clk osc0;
-+static struct clk osc1;
- 
- static unsigned long osc_get_rate(struct clk *clk)
- {
--	return at32ap7000_osc_rates[clk->index];
-+	return at32_board_osc_rates[clk->index];
- }
- 
- static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
- {
- 	unsigned long div, mul, rate;
- 
--	if (!(control & PM_BIT(PLLEN)))
--		return 0;
--
- 	div = PM_BFEXT(PLLDIV, control) + 1;
- 	mul = PM_BFEXT(PLLMUL, control) + 1;
- 
-@@ -120,6 +116,71 @@ static unsigned long pll_get_rate(struct
- 	return rate;
- }
- 
-+static long pll_set_rate(struct clk *clk, unsigned long rate,
-+			 u32 *pll_ctrl)
-+{
-+	unsigned long mul;
-+	unsigned long mul_best_fit = 0;
-+	unsigned long div;
-+	unsigned long div_min;
-+	unsigned long div_max;
-+	unsigned long div_best_fit = 0;
-+	unsigned long base;
-+	unsigned long pll_in;
-+	unsigned long actual = 0;
-+	unsigned long rate_error;
-+	unsigned long rate_error_prev = ~0UL;
-+	u32 ctrl;
-+
-+	/* Rate must be between 80 MHz and 200 Mhz. */
-+	if (rate < 80000000UL || rate > 200000000UL)
-+		return -EINVAL;
-+
-+	ctrl = PM_BF(PLLOPT, 4);
-+	base = clk->parent->get_rate(clk->parent);
-+
-+	/* PLL input frequency must be between 6 MHz and 32 MHz. */
-+	div_min = DIV_ROUND_UP(base, 32000000UL);
-+	div_max = base / 6000000UL;
-+
-+	if (div_max < div_min)
-+		return -EINVAL;
-+
-+	for (div = div_min; div <= div_max; div++) {
-+		pll_in = (base + div / 2) / div;
-+		mul = (rate + pll_in / 2) / pll_in;
-+
-+		if (mul == 0)
-+			continue;
-+
-+		actual = pll_in * mul;
-+		rate_error = abs(actual - rate);
-+
-+		if (rate_error < rate_error_prev) {
-+			mul_best_fit = mul;
-+			div_best_fit = div;
-+			rate_error_prev = rate_error;
-+		}
-+
-+		if (rate_error == 0)
-+			break;
-+	}
-+
-+	if (div_best_fit == 0)
-+		return -EINVAL;
-+
-+	ctrl |= PM_BF(PLLMUL, mul_best_fit - 1);
-+	ctrl |= PM_BF(PLLDIV, div_best_fit - 1);
-+	ctrl |= PM_BF(PLLCOUNT, 16);
-+
-+	if (clk->parent == &osc1)
-+		ctrl |= PM_BIT(PLLOSC);
-+
-+	*pll_ctrl = ctrl;
-+
-+	return actual;
-+}
-+
- static unsigned long pll0_get_rate(struct clk *clk)
- {
- 	u32 control;
-@@ -129,6 +190,41 @@ static unsigned long pll0_get_rate(struc
- 	return pll_get_rate(clk, control);
- }
- 
-+static void pll1_mode(struct clk *clk, int enabled)
-+{
-+	unsigned long timeout;
-+	u32 status;
-+	u32 ctrl;
-+
-+	ctrl = pm_readl(PLL1);
-+
-+	if (enabled) {
-+		if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) {
-+			pr_debug("clk %s: failed to enable, rate not set\n",
-+					clk->name);
-+			return;
-+		}
-+
-+		ctrl |= PM_BIT(PLLEN);
-+		pm_writel(PLL1, ctrl);
-+
-+		/* Wait for PLL lock. */
-+		for (timeout = 10000; timeout; timeout--) {
-+			status = pm_readl(ISR);
-+			if (status & PM_BIT(LOCK1))
-+				break;
-+			udelay(10);
-+		}
-+
-+		if (!(status & PM_BIT(LOCK1)))
-+			printk(KERN_ERR "clk %s: timeout waiting for lock\n",
-+					clk->name);
-+	} else {
-+		ctrl &= ~PM_BIT(PLLEN);
-+		pm_writel(PLL1, ctrl);
-+	}
-+}
-+
- static unsigned long pll1_get_rate(struct clk *clk)
- {
- 	u32 control;
-@@ -138,6 +234,49 @@ static unsigned long pll1_get_rate(struc
- 	return pll_get_rate(clk, control);
- }
- 
-+static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+	u32 ctrl = 0;
-+	unsigned long actual_rate;
-+
-+	actual_rate = pll_set_rate(clk, rate, &ctrl);
-+
-+	if (apply) {
-+		if (actual_rate != rate)
-+			return -EINVAL;
-+		if (clk->users > 0)
-+			return -EBUSY;
-+		pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
-+				clk->name, rate, actual_rate);
-+		pm_writel(PLL1, ctrl);
-+	}
-+
-+	return actual_rate;
-+}
-+
-+static int pll1_set_parent(struct clk *clk, struct clk *parent)
-+{
-+	u32 ctrl;
-+
-+	if (clk->users > 0)
-+		return -EBUSY;
-+
-+	ctrl = pm_readl(PLL1);
-+	WARN_ON(ctrl & PM_BIT(PLLEN));
-+
-+	if (parent == &osc0)
-+		ctrl &= ~PM_BIT(PLLOSC);
-+	else if (parent == &osc1)
-+		ctrl |= PM_BIT(PLLOSC);
-+	else
-+		return -EINVAL;
-+
-+	pm_writel(PLL1, ctrl);
-+	clk->parent = parent;
-+
-+	return 0;
-+}
-+
- /*
-  * The AT32AP7000 has five primary clock sources: One 32kHz
-  * oscillator, two crystal oscillators and two PLLs.
-@@ -166,7 +305,10 @@ static struct clk pll0 = {
- };
- static struct clk pll1 = {
- 	.name		= "pll1",
-+	.mode		= pll1_mode,
- 	.get_rate	= pll1_get_rate,
-+	.set_rate	= pll1_set_rate,
-+	.set_parent	= pll1_set_parent,
- 	.parent		= &osc0,
- };
- 
-@@ -534,6 +676,14 @@ static struct clk hramc_clk = {
- 	.users		= 1,
- 	.index		= 3,
- };
-+static struct clk sdramc_clk = {
-+	.name		= "sdramc_clk",
-+	.parent		= &pbb_clk,
-+	.mode		= pbb_clk_mode,
-+	.get_rate	= pbb_clk_get_rate,
-+	.users		= 1,
-+	.index		= 14,
-+};
- 
- static struct resource smc0_resource[] = {
- 	PBMEM(0xfff03400),
-@@ -605,19 +755,32 @@ static inline void set_ebi_sfr_bits(u32 
- }
- 
- /* --------------------------------------------------------------------
-- *  System Timer/Counter (TC)
-+ *  Timer/Counter (TC)
-  * -------------------------------------------------------------------- */
--static struct resource at32_systc0_resource[] = {
-+
-+static struct resource at32_tcb0_resource[] = {
- 	PBMEM(0xfff00c00),
- 	IRQ(22),
- };
--struct platform_device at32_systc0_device = {
--	.name		= "systc",
-+static struct platform_device at32_tcb0_device = {
-+	.name		= "atmel_tcb",
- 	.id		= 0,
--	.resource	= at32_systc0_resource,
--	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
-+	.resource	= at32_tcb0_resource,
-+	.num_resources	= ARRAY_SIZE(at32_tcb0_resource),
-+};
-+DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
-+
-+static struct resource at32_tcb1_resource[] = {
-+	PBMEM(0xfff01000),
-+	IRQ(23),
-+};
-+static struct platform_device at32_tcb1_device = {
-+	.name		= "atmel_tcb",
-+	.id		= 1,
-+	.resource	= at32_tcb1_resource,
-+	.num_resources	= ARRAY_SIZE(at32_tcb1_resource),
- };
--DEV_CLK(pclk, at32_systc0, pbb, 3);
-+DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
- 
- /* --------------------------------------------------------------------
-  *  PIO
-@@ -669,7 +832,8 @@ void __init at32_add_system_devices(void
- 	platform_device_register(&pdc_device);
- 	platform_device_register(&dmaca0_device);
- 
--	platform_device_register(&at32_systc0_device);
-+	platform_device_register(&at32_tcb0_device);
-+	platform_device_register(&at32_tcb1_device);
- 
- 	platform_device_register(&pio0_device);
- 	platform_device_register(&pio1_device);
-@@ -679,6 +843,81 @@ void __init at32_add_system_devices(void
- }
- 
- /* --------------------------------------------------------------------
-+ *  PSIF
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_psif0_resource[] __initdata = {
-+	{
-+		.start	= 0xffe03c00,
-+		.end	= 0xffe03cff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(18),
-+};
-+static struct clk atmel_psif0_pclk = {
-+	.name		= "pclk",
-+	.parent		= &pba_clk,
-+	.mode		= pba_clk_mode,
-+	.get_rate	= pba_clk_get_rate,
-+	.index		= 15,
-+};
-+
-+static struct resource atmel_psif1_resource[] __initdata = {
-+	{
-+		.start	= 0xffe03d00,
-+		.end	= 0xffe03dff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(18),
-+};
-+static struct clk atmel_psif1_pclk = {
-+	.name		= "pclk",
-+	.parent		= &pba_clk,
-+	.mode		= pba_clk_mode,
-+	.get_rate	= pba_clk_get_rate,
-+	.index		= 15,
-+};
-+
-+struct platform_device *__init at32_add_device_psif(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	if (!(id == 0 || id == 1))
-+		return NULL;
-+
-+	pdev = platform_device_alloc("atmel_psif", id);
-+	if (!pdev)
-+		return NULL;
-+
-+	switch (id) {
-+	case 0:
-+		if (platform_device_add_resources(pdev, atmel_psif0_resource,
-+					ARRAY_SIZE(atmel_psif0_resource)))
-+			goto err_add_resources;
-+		atmel_psif0_pclk.dev = &pdev->dev;
-+		select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
-+		select_peripheral(PA(9), PERIPH_A, 0); /* DATA  */
-+		break;
-+	case 1:
-+		if (platform_device_add_resources(pdev, atmel_psif1_resource,
-+					ARRAY_SIZE(atmel_psif1_resource)))
-+			goto err_add_resources;
-+		atmel_psif1_pclk.dev = &pdev->dev;
-+		select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
-+		select_peripheral(PB(12), PERIPH_A, 0); /* DATA  */
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_add(pdev);
-+	return pdev;
-+
-+err_add_resources:
-+	platform_device_put(pdev);
-+	return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-  *  USART
-  * -------------------------------------------------------------------- */
- 
-@@ -951,7 +1190,8 @@ at32_add_device_spi(unsigned int id, str
- 	switch (id) {
- 	case 0:
- 		pdev = &atmel_spi0_device;
--		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
-+		/* pullup MISO so a level is always defined */
-+		select_peripheral(PA(0),  PERIPH_A, AT32_GPIOF_PULLUP);
- 		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
- 		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
- 		at32_spi_setup_slaves(0, b, n, spi0_pins);
-@@ -959,7 +1199,8 @@ at32_add_device_spi(unsigned int id, str
- 
- 	case 1:
- 		pdev = &atmel_spi1_device;
--		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
-+		/* pullup MISO so a level is always defined */
-+		select_peripheral(PB(0),  PERIPH_B, AT32_GPIOF_PULLUP);
- 		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
- 		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
- 		at32_spi_setup_slaves(1, b, n, spi1_pins);
-@@ -989,7 +1230,9 @@ static struct clk atmel_twi0_pclk = {
- 	.index		= 2,
- };
- 
--struct platform_device *__init at32_add_device_twi(unsigned int id)
-+struct platform_device *__init at32_add_device_twi(unsigned int id,
-+						    struct i2c_board_info *b,
-+						    unsigned int n)
- {
- 	struct platform_device *pdev;
- 
-@@ -1009,6 +1252,9 @@ struct platform_device *__init at32_add_
- 
- 	atmel_twi0_pclk.dev = &pdev->dev;
- 
-+	if (b)
-+		i2c_register_board_info(id, b, n);
-+
- 	platform_device_add(pdev);
- 	return pdev;
- 
-@@ -1032,7 +1278,8 @@ static struct clk atmel_mci0_pclk = {
- 	.index		= 9,
- };
- 
--struct platform_device *__init at32_add_device_mci(unsigned int id)
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
- {
- 	struct platform_device *pdev;
- 
-@@ -1041,11 +1288,15 @@ struct platform_device *__init at32_add_
- 
- 	pdev = platform_device_alloc("atmel_mci", id);
- 	if (!pdev)
--		return NULL;
-+		goto fail;
- 
- 	if (platform_device_add_resources(pdev, atmel_mci0_resource,
- 				ARRAY_SIZE(atmel_mci0_resource)))
--		goto err_add_resources;
-+		goto fail;
-+
-+	if (data && platform_device_add_data(pdev, data,
-+				sizeof(struct mci_platform_data)))
-+		goto fail;
- 
- 	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
- 	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-@@ -1054,12 +1305,19 @@ struct platform_device *__init at32_add_
- 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
- 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
- 
-+	if (data) {
-+		if (data->detect_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->detect_pin, 0);
-+		if (data->wp_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->wp_pin, 0);
-+	}
-+
- 	atmel_mci0_pclk.dev = &pdev->dev;
- 
- 	platform_device_add(pdev);
- 	return pdev;
- 
--err_add_resources:
-+fail:
- 	platform_device_put(pdev);
- 	return NULL;
- }
-@@ -1097,7 +1355,8 @@ static struct clk atmel_lcdfb0_pixclk = 
- 
- struct platform_device *__init
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
--		     unsigned long fbmem_start, unsigned long fbmem_len)
-+		     unsigned long fbmem_start, unsigned long fbmem_len,
-+		     unsigned int pin_config)
- {
- 	struct platform_device *pdev;
- 	struct atmel_lcdfb_info *info;
-@@ -1124,37 +1383,77 @@ at32_add_device_lcdc(unsigned int id, st
- 	switch (id) {
- 	case 0:
- 		pdev = &atmel_lcdfb0_device;
--		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
--		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
--		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
--		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
--		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
--		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
--		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
--		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
--		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
--		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
--		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
--		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
--		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
--		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
--		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
--		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
--		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
--		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
--		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
--		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
--		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
--		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
--		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
--		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
--		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
--		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
--		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
--		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
--		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
--		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
--		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-+
-+		switch (pin_config) {
-+		case 0:
-+			select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
-+			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-+			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-+			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-+			select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
-+			select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
-+			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-+			select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
-+			select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
-+			select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
-+			select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
-+			select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
-+			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-+			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-+			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-+			select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
-+			select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
-+			select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
-+			select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
-+			select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
-+			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-+			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-+			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-+			select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
-+			select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
-+			select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
-+			select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
-+			select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
-+			select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
-+			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-+			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-+			break;
-+		case 1:
-+			select_peripheral(PE(0),  PERIPH_B, 0);	/* CC	  */
-+			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-+			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-+			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-+			select_peripheral(PE(1),  PERIPH_B, 0);	/* DVAL	  */
-+			select_peripheral(PE(2),  PERIPH_B, 0);	/* MODE	  */
-+			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-+			select_peripheral(PE(3),  PERIPH_B, 0);	/* DATA0  */
-+			select_peripheral(PE(4),  PERIPH_B, 0);	/* DATA1  */
-+			select_peripheral(PE(5),  PERIPH_B, 0);	/* DATA2  */
-+			select_peripheral(PE(6),  PERIPH_B, 0);	/* DATA3  */
-+			select_peripheral(PE(7),  PERIPH_B, 0);	/* DATA4  */
-+			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-+			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-+			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-+			select_peripheral(PE(8),  PERIPH_B, 0);	/* DATA8  */
-+			select_peripheral(PE(9),  PERIPH_B, 0);	/* DATA9  */
-+			select_peripheral(PE(10), PERIPH_B, 0);	/* DATA10 */
-+			select_peripheral(PE(11), PERIPH_B, 0);	/* DATA11 */
-+			select_peripheral(PE(12), PERIPH_B, 0);	/* DATA12 */
-+			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-+			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-+			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-+			select_peripheral(PE(13), PERIPH_B, 0);	/* DATA16 */
-+			select_peripheral(PE(14), PERIPH_B, 0);	/* DATA17 */
-+			select_peripheral(PE(15), PERIPH_B, 0);	/* DATA18 */
-+			select_peripheral(PE(16), PERIPH_B, 0);	/* DATA19 */
-+			select_peripheral(PE(17), PERIPH_B, 0);	/* DATA20 */
-+			select_peripheral(PE(18), PERIPH_B, 0);	/* DATA21 */
-+			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-+			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-+			break;
-+		default:
-+			goto err_invalid_id;
-+		}
- 
- 		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
- 		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-@@ -1351,9 +1650,39 @@ static struct clk usba0_hclk = {
- 	.index		= 6,
- };
- 
-+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-+	[idx] = {						\
-+		.name		= nam,				\
-+		.index		= idx,				\
-+		.fifo_size	= maxpkt,			\
-+		.nr_banks	= maxbk,			\
-+		.can_dma	= dma,				\
-+		.can_isoc	= isoc,				\
-+	}
-+
-+static struct usba_ep_data at32_usba_ep[] __initdata = {
-+	EP("ep0",     0,   64, 1, 0, 0),
-+	EP("ep1",     1,  512, 2, 1, 1),
-+	EP("ep2",     2,  512, 2, 1, 1),
-+	EP("ep3-int", 3,   64, 3, 1, 0),
-+	EP("ep4-int", 4,   64, 3, 1, 0),
-+	EP("ep5",     5, 1024, 3, 1, 1),
-+	EP("ep6",     6, 1024, 3, 1, 1),
-+};
-+
-+#undef EP
-+
- struct platform_device *__init
- at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
- {
-+	/*
-+	 * pdata doesn't have room for any endpoints, so we need to
-+	 * append room for the ones we need right after it.
-+	 */
-+	struct {
-+		struct usba_platform_data pdata;
-+		struct usba_ep_data ep[7];
-+	} usba_data;
- 	struct platform_device *pdev;
- 
- 	if (id != 0)
-@@ -1367,13 +1696,20 @@ at32_add_device_usba(unsigned int id, st
- 					  ARRAY_SIZE(usba0_resource)))
- 		goto out_free_pdev;
- 
--	if (data) {
--		if (platform_device_add_data(pdev, data, sizeof(*data)))
--			goto out_free_pdev;
-+	if (data)
-+		usba_data.pdata.vbus_pin = data->vbus_pin;
-+	else
-+		usba_data.pdata.vbus_pin = -EINVAL;
- 
--		if (data->vbus_pin != GPIO_PIN_NONE)
--			at32_select_gpio(data->vbus_pin, 0);
--	}
-+	data = &usba_data.pdata;
-+	data->num_ep = ARRAY_SIZE(at32_usba_ep);
-+	memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
-+
-+	if (platform_device_add_data(pdev, data, sizeof(usba_data)))
-+		goto out_free_pdev;
-+
-+	if (data->vbus_pin >= 0)
-+		at32_select_gpio(data->vbus_pin, 0);
- 
- 	usba0_pclk.dev = &pdev->dev;
- 	usba0_hclk.dev = &pdev->dev;
-@@ -1526,6 +1862,58 @@ fail:
- #endif
- 
- /* --------------------------------------------------------------------
-+ * NAND Flash / SmartMedia
-+ * -------------------------------------------------------------------- */
-+static struct resource smc_cs3_resource[] __initdata = {
-+	{
-+		.start	= 0x0c000000,
-+		.end	= 0x0fffffff,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.start	= 0xfff03c00,
-+		.end	= 0xfff03fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+struct platform_device *__init
-+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
-+{
-+	struct platform_device *pdev;
-+
-+	if (id != 0 || !data)
-+		return NULL;
-+
-+	pdev = platform_device_alloc("atmel_nand", id);
-+	if (!pdev)
-+		goto fail;
-+
-+	if (platform_device_add_resources(pdev, smc_cs3_resource,
-+				ARRAY_SIZE(smc_cs3_resource)))
-+		goto fail;
-+
-+	if (platform_device_add_data(pdev, data,
-+				sizeof(struct atmel_nand_data)))
-+		goto fail;
-+
-+	set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
-+	if (data->enable_pin)
-+		at32_select_gpio(data->enable_pin,
-+				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+	if (data->rdy_pin)
-+		at32_select_gpio(data->rdy_pin, 0);
-+	if (data->det_pin)
-+		at32_select_gpio(data->det_pin, 0);
-+
-+	platform_device_add(pdev);
-+	return pdev;
-+
-+fail:
-+	platform_device_put(pdev);
-+	return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-  * AC97C
-  * -------------------------------------------------------------------- */
- static struct resource atmel_ac97c0_resource[] __initdata = {
-@@ -1540,9 +1928,11 @@ static struct clk atmel_ac97c0_pclk = {
- 	.index		= 10,
- };
- 
--struct platform_device *__init at32_add_device_ac97c(unsigned int id)
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
- {
- 	struct platform_device *pdev;
-+	struct ac97c_platform_data _data;
- 
- 	if (id != 0)
- 		return NULL;
-@@ -1553,19 +1943,37 @@ struct platform_device *__init at32_add_
- 
- 	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
- 				ARRAY_SIZE(atmel_ac97c0_resource)))
--		goto err_add_resources;
-+		goto fail;
- 
--	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
--	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
--	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
--	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
-+	if (!data) {
-+		data = &_data;
-+		memset(data, 0, sizeof(struct ac97c_platform_data));
-+		data->reset_pin = GPIO_PIN_NONE;
-+	}
-+
-+	data->dma_rx_periph_id = 3;
-+	data->dma_tx_periph_id = 4;
-+	data->dma_controller_id = 0;
-+
-+	if (platform_device_add_data(pdev, data,
-+				sizeof(struct ac97c_platform_data)))
-+		goto fail;
-+
-+	select_peripheral(PB(20), PERIPH_B, 0);	/* SDO	*/
-+	select_peripheral(PB(21), PERIPH_B, 0);	/* SYNC	*/
-+	select_peripheral(PB(22), PERIPH_B, 0);	/* SCLK	*/
-+	select_peripheral(PB(23), PERIPH_B, 0);	/* SDI	*/
-+
-+	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+	if (data->reset_pin != GPIO_PIN_NONE)
-+		at32_select_gpio(data->reset_pin, 0);
- 
- 	atmel_ac97c0_pclk.dev = &pdev->dev;
- 
- 	platform_device_add(pdev);
- 	return pdev;
- 
--err_add_resources:
-+fail:
- 	platform_device_put(pdev);
- 	return NULL;
- }
-@@ -1683,6 +2091,7 @@ struct clk *at32_clock_list[] = {
- 	&hmatrix_clk,
- 	&ebi_clk,
- 	&hramc_clk,
-+	&sdramc_clk,
- 	&smc0_pclk,
- 	&smc0_mck,
- 	&pdc_hclk,
-@@ -1694,7 +2103,10 @@ struct clk *at32_clock_list[] = {
- 	&pio2_mck,
- 	&pio3_mck,
- 	&pio4_mck,
--	&at32_systc0_pclk,
-+	&at32_tcb0_t0_clk,
-+	&at32_tcb1_t0_clk,
-+	&atmel_psif0_pclk,
-+	&atmel_psif1_pclk,
- 	&atmel_usart0_usart,
- 	&atmel_usart1_usart,
- 	&atmel_usart2_usart,
-@@ -1730,16 +2142,7 @@ struct clk *at32_clock_list[] = {
- };
- unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
- 
--void __init at32_portmux_init(void)
--{
--	at32_init_pio(&pio0_device);
--	at32_init_pio(&pio1_device);
--	at32_init_pio(&pio2_device);
--	at32_init_pio(&pio3_device);
--	at32_init_pio(&pio4_device);
--}
--
--void __init at32_clock_init(void)
-+void __init setup_platform(void)
- {
- 	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
- 	int i;
-@@ -1794,4 +2197,36 @@ void __init at32_clock_init(void)
- 	pm_writel(HSB_MASK, hsb_mask);
- 	pm_writel(PBA_MASK, pba_mask);
- 	pm_writel(PBB_MASK, pbb_mask);
-+
-+	/* Initialize the port muxes */
-+	at32_init_pio(&pio0_device);
-+	at32_init_pio(&pio1_device);
-+	at32_init_pio(&pio2_device);
-+	at32_init_pio(&pio3_device);
-+	at32_init_pio(&pio4_device);
-+}
-+
-+struct gen_pool *sram_pool;
-+
-+static int __init sram_init(void)
-+{
-+	struct gen_pool *pool;
-+
-+	/* 1KiB granularity */
-+	pool = gen_pool_create(10, -1);
-+	if (!pool)
-+		goto fail;
-+
-+	if (gen_pool_add(pool, 0x24000000, 0x8000, -1))
-+		goto err_pool_add;
-+
-+	sram_pool = pool;
-+	return 0;
-+
-+err_pool_add:
-+	gen_pool_destroy(pool);
-+fail:
-+	pr_err("Failed to create SRAM pool\n");
-+	return -ENOMEM;
- }
-+core_initcall(sram_init);
---- a/arch/avr32/mach-at32ap/cpufreq.c
-+++ b/arch/avr32/mach-at32ap/cpufreq.c
-@@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void
- {
- 	return cpufreq_register_driver(&at32_driver);
- }
--
--arch_initcall(at32_cpufreq_init);
-+late_initcall(at32_cpufreq_init);
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/gpio-dev.c
-@@ -0,0 +1,573 @@
-+/*
-+ * GPIO /dev and configfs interface
-+ *
-+ * Copyright (C) 2006-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/configfs.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/poll.h>
-+#include <linux/uaccess.h>
-+#include <linux/wait.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/arch/portmux.h>
-+
-+#define GPIO_DEV_MAX			8
-+
-+static struct class *gpio_dev_class;
-+static dev_t gpio_devt;
-+
-+struct gpio_item {
-+	spinlock_t lock;
-+
-+	int enabled;
-+	int initialized;
-+	int port;
-+	u32 pin_mask;
-+	u32 oe_mask;
-+
-+	/* Pin state last time we read it (for blocking reads) */
-+	u32 pin_state;
-+	int changed;
-+
-+	wait_queue_head_t change_wq;
-+	struct fasync_struct *async_queue;
-+
-+	int id;
-+	struct class_device *gpio_dev;
-+	struct cdev char_dev;
-+	struct config_item item;
-+};
-+
-+struct gpio_attribute {
-+	struct configfs_attribute attr;
-+	ssize_t (*show)(struct gpio_item *, char *);
-+	ssize_t (*store)(struct gpio_item *, const char *, size_t);
-+};
-+
-+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
-+{
-+	struct gpio_item *gpio = dev_id;
-+	u32 old_state, new_state;
-+
-+	old_state = gpio->pin_state;
-+	new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+	gpio->pin_state = new_state;
-+
-+	if (new_state != old_state) {
-+		gpio->changed = 1;
-+		wake_up_interruptible(&gpio->change_wq);
-+
-+		if (gpio->async_queue)
-+			kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int gpio_dev_open(struct inode *inode, struct file *file)
-+{
-+	struct gpio_item *gpio = container_of(inode->i_cdev,
-+					      struct gpio_item,
-+					      char_dev);
-+	unsigned int irq;
-+	unsigned int i;
-+	int ret;
-+
-+	nonseekable_open(inode, file);
-+	config_item_get(&gpio->item);
-+	file->private_data = gpio;
-+
-+	gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
-+						       gpio->pin_mask);
-+	gpio->changed = 1;
-+
-+	for (i = 0; i < 32; i++) {
-+		if (gpio->pin_mask & (1 << i)) {
-+			irq = gpio_to_irq(32 * gpio->port + i);
-+			ret = request_irq(irq, gpio_dev_interrupt, 0,
-+					  "gpio-dev", gpio);
-+			if (ret)
-+				goto err_irq;
-+		}
-+	}
-+
-+	return 0;
-+
-+err_irq:
-+	while (i--) {
-+		if (gpio->pin_mask & (1 << i)) {
-+			irq = gpio_to_irq(32 * gpio->port + i);
-+			free_irq(irq, gpio);
-+		}
-+	}
-+
-+	config_item_put(&gpio->item);
-+
-+	return ret;
-+}
-+
-+static int gpio_dev_fasync(int fd, struct file *file, int mode)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+
-+	return fasync_helper(fd, file, mode, &gpio->async_queue);
-+}
-+
-+static int gpio_dev_release(struct inode *inode, struct file *file)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	unsigned int irq;
-+	unsigned int i;
-+
-+	gpio_dev_fasync(-1, file, 0);
-+
-+	for (i = 0; i < 32; i++) {
-+		if (gpio->pin_mask & (1 << i)) {
-+			irq = gpio_to_irq(32 * gpio->port + i);
-+			free_irq(irq, gpio);
-+		}
-+	}
-+
-+	config_item_put(&gpio->item);
-+
-+	return 0;
-+}
-+
-+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	unsigned int mask = 0;
-+
-+	poll_wait(file, &gpio->change_wq, wait);
-+	if (gpio->changed)
-+		mask |= POLLIN | POLLRDNORM;
-+
-+	return mask;
-+}
-+
-+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
-+			     size_t count, loff_t *offset)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	u32 value;
-+
-+	spin_lock_irq(&gpio->lock);
-+	while (!gpio->changed) {
-+		spin_unlock_irq(&gpio->lock);
-+
-+		if (file->f_flags & O_NONBLOCK)
-+			return -EAGAIN;
-+
-+		if (wait_event_interruptible(gpio->change_wq, gpio->changed))
-+			return -ERESTARTSYS;
-+
-+		spin_lock_irq(&gpio->lock);
-+	}
-+
-+	gpio->changed = 0;
-+	value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+
-+	spin_unlock_irq(&gpio->lock);
-+
-+	count = min(count, (size_t)4);
-+	if (copy_to_user(buf, &value, count))
-+		return -EFAULT;
-+
-+	return count;
-+}
-+
-+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
-+			      size_t count, loff_t *offset)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	u32 value = 0;
-+	u32 mask = ~0UL;
-+
-+	count = min(count, (size_t)4);
-+	if (copy_from_user(&value, buf, count))
-+		return -EFAULT;
-+
-+	/* Assuming big endian */
-+	mask <<= (4 - count) * 8;
-+	mask &= gpio->pin_mask;
-+
-+	at32_gpio_set_value_multiple(gpio->port, value, mask);
-+
-+	return count;
-+}
-+
-+static struct file_operations gpio_dev_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.open		= gpio_dev_open,
-+	.release	= gpio_dev_release,
-+	.fasync		= gpio_dev_fasync,
-+	.poll		= gpio_dev_poll,
-+	.read		= gpio_dev_read,
-+	.write		= gpio_dev_write,
-+};
-+
-+static struct gpio_item *to_gpio_item(struct config_item *item)
-+{
-+	return item ? container_of(item, struct gpio_item, item) : NULL;
-+}
-+
-+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "%d\n", gpio->port);
-+}
-+
-+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
-+				  const char *page, size_t count)
-+{
-+	unsigned long id;
-+	char *p = (char *)page;
-+	ssize_t ret = -EINVAL;
-+
-+	id = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	/* Switching PIO is not allowed when live... */
-+	spin_lock(&gpio->lock);
-+	if (!gpio->enabled) {
-+		ret = -ENXIO;
-+		if (at32_gpio_port_is_valid(id)) {
-+			gpio->port = id;
-+			ret = count;
-+		}
-+	}
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "0x%08x\n", gpio->pin_mask);
-+}
-+
-+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
-+				   const char *page, size_t count)
-+{
-+	u32 new_mask;
-+	char *p = (char *)page;
-+	ssize_t ret = -EINVAL;
-+
-+	new_mask = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	/* Can't update the pin mask while live. */
-+	spin_lock(&gpio->lock);
-+	if (!gpio->enabled) {
-+		gpio->oe_mask &= new_mask;
-+		gpio->pin_mask = new_mask;
-+		ret = count;
-+	}
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "0x%08x\n", gpio->oe_mask);
-+}
-+
-+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
-+				  const char *page, size_t count)
-+{
-+	u32 mask;
-+	char *p = (char *)page;
-+	ssize_t ret = -EINVAL;
-+
-+	mask = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	spin_lock(&gpio->lock);
-+	if (!gpio->enabled) {
-+		gpio->oe_mask = mask & gpio->pin_mask;
-+		ret = count;
-+	}
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "%d\n", gpio->enabled);
-+}
-+
-+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
-+				  const char *page, size_t count)
-+{
-+	char *p = (char *)page;
-+	int enabled;
-+	int ret;
-+
-+	enabled = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	/* make it a boolean value */
-+	enabled = !!enabled;
-+
-+	if (gpio->enabled == enabled)
-+		/* No change; do nothing. */
-+		return count;
-+
-+	BUG_ON(gpio->id >= GPIO_DEV_MAX);
-+
-+	if (!enabled) {
-+		class_device_unregister(gpio->gpio_dev);
-+		cdev_del(&gpio->char_dev);
-+		at32_deselect_pins(gpio->port, gpio->pin_mask);
-+		gpio->initialized = 0;
-+	} else {
-+		if (gpio->port < 0 || !gpio->pin_mask)
-+			return -ENODEV;
-+	}
-+
-+	/* Disallow any updates to gpio_id or pin_mask */
-+	spin_lock(&gpio->lock);
-+	gpio->enabled = enabled;
-+	spin_unlock(&gpio->lock);
-+
-+	if (!enabled)
-+		return count;
-+
-+	/* Now, try to allocate the pins */
-+	ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
-+	if (ret)
-+		goto err_alloc_pins;
-+
-+	gpio->initialized = 1;
-+
-+	cdev_init(&gpio->char_dev, &gpio_dev_fops);
-+	gpio->char_dev.owner = THIS_MODULE;
-+	ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
-+	if (ret < 0)
-+		goto err_cdev_add;
-+	gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
-+					     MKDEV(MAJOR(gpio_devt), gpio->id),
-+					     NULL,
-+					     "gpio%d", gpio->id);
-+	if (IS_ERR(gpio->gpio_dev)) {
-+		printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
-+		ret = PTR_ERR(gpio->gpio_dev);
-+		goto err_class_dev;
-+	}
-+
-+	printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
-+	       gpio->id, gpio->port, gpio->pin_mask,
-+	       MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
-+
-+	return 0;
-+
-+err_class_dev:
-+	cdev_del(&gpio->char_dev);
-+err_cdev_add:
-+	at32_deselect_pins(gpio->port, gpio->pin_mask);
-+	gpio->initialized = 0;
-+err_alloc_pins:
-+	spin_lock(&gpio->lock);
-+	gpio->enabled = 0;
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static struct gpio_attribute gpio_item_attr_gpio_id = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "gpio_id",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_gpio_id,
-+	.store = gpio_store_gpio_id,
-+};
-+static struct gpio_attribute gpio_item_attr_pin_mask = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "pin_mask",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_pin_mask,
-+	.store = gpio_store_pin_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_oe_mask = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "oe_mask",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_oe_mask,
-+	.store = gpio_store_oe_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_enabled = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "enabled",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_enabled,
-+	.store = gpio_store_enabled,
-+};
-+
-+static struct configfs_attribute *gpio_item_attrs[] = {
-+	&gpio_item_attr_gpio_id.attr,
-+	&gpio_item_attr_pin_mask.attr,
-+	&gpio_item_attr_oe_mask.attr,
-+	&gpio_item_attr_enabled.attr,
-+	NULL,
-+};
-+
-+static ssize_t gpio_show_attr(struct config_item *item,
-+			      struct configfs_attribute *attr,
-+			      char *page)
-+{
-+	struct gpio_item *gpio_item = to_gpio_item(item);
-+	struct gpio_attribute *gpio_attr
-+		= container_of(attr, struct gpio_attribute, attr);
-+	ssize_t ret = 0;
-+
-+	if (gpio_attr->show)
-+		ret = gpio_attr->show(gpio_item, page);
-+	return ret;
-+}
-+
-+static ssize_t gpio_store_attr(struct config_item *item,
-+			       struct configfs_attribute *attr,
-+			       const char *page, size_t count)
-+{
-+	struct gpio_item *gpio_item = to_gpio_item(item);
-+	struct gpio_attribute *gpio_attr
-+		= container_of(attr, struct gpio_attribute, attr);
-+	ssize_t ret = -EINVAL;
-+
-+	if (gpio_attr->store)
-+		ret = gpio_attr->store(gpio_item, page, count);
-+	return ret;
-+}
-+
-+static void gpio_release(struct config_item *item)
-+{
-+	kfree(to_gpio_item(item));
-+}
-+
-+static struct configfs_item_operations gpio_item_ops = {
-+	.release		= gpio_release,
-+	.show_attribute		= gpio_show_attr,
-+	.store_attribute	= gpio_store_attr,
-+};
-+
-+static struct config_item_type gpio_item_type = {
-+	.ct_item_ops	= &gpio_item_ops,
-+	.ct_attrs	= gpio_item_attrs,
-+	.ct_owner	= THIS_MODULE,
-+};
-+
-+static struct config_item *gpio_make_item(struct config_group *group,
-+					  const char *name)
-+{
-+	static int next_id;
-+	struct gpio_item *gpio;
-+
-+	if (next_id >= GPIO_DEV_MAX)
-+		return NULL;
-+
-+	gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
-+	if (!gpio)
-+		return NULL;
-+
-+	gpio->id = next_id++;
-+	config_item_init_type_name(&gpio->item, name, &gpio_item_type);
-+	spin_lock_init(&gpio->lock);
-+	init_waitqueue_head(&gpio->change_wq);
-+
-+	return &gpio->item;
-+}
-+
-+static void gpio_drop_item(struct config_group *group,
-+			   struct config_item *item)
-+{
-+	struct gpio_item *gpio = to_gpio_item(item);
-+
-+	spin_lock(&gpio->lock);
-+	if (gpio->enabled) {
-+		class_device_unregister(gpio->gpio_dev);
-+		cdev_del(&gpio->char_dev);
-+	}
-+
-+	if (gpio->initialized) {
-+		at32_deselect_pins(gpio->port, gpio->pin_mask);
-+		gpio->initialized = 0;
-+		gpio->enabled = 0;
-+	}
-+	spin_unlock(&gpio->lock);
-+}
-+
-+static struct configfs_group_operations gpio_group_ops = {
-+	.make_item	= gpio_make_item,
-+	.drop_item	= gpio_drop_item,
-+};
-+
-+static struct config_item_type gpio_group_type = {
-+	.ct_group_ops	= &gpio_group_ops,
-+	.ct_owner	= THIS_MODULE,
-+};
-+
-+static struct configfs_subsystem gpio_subsys = {
-+	.su_group = {
-+		.cg_item = {
-+			 .ci_namebuf = "gpio",
-+			 .ci_type = &gpio_group_type,
-+		 },
-+	},
-+};
-+
-+static int __init gpio_dev_init(void)
-+{
-+	int err;
-+
-+	gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
-+	if (IS_ERR(gpio_dev_class)) {
-+		err = PTR_ERR(gpio_dev_class);
-+		goto err_class_create;
-+	}
-+
-+	err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
-+	if (err < 0)
-+		goto err_alloc_chrdev;
-+
-+	/* Configfs initialization */
-+	config_group_init(&gpio_subsys.su_group);
-+	mutex_init(&gpio_subsys.su_mutex);
-+	err = configfs_register_subsystem(&gpio_subsys);
-+	if (err)
-+		goto err_register_subsys;
-+
-+	return 0;
-+
-+err_register_subsys:
-+	unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
-+err_alloc_chrdev:
-+	class_destroy(gpio_dev_class);
-+err_class_create:
-+	printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
-+	return err;
-+}
-+late_initcall(gpio_dev_init);
---- a/arch/avr32/mach-at32ap/hsmc.c
-+++ b/arch/avr32/mach-at32ap/hsmc.c
-@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
- {
- 	return platform_driver_register(&hsmc_driver);
- }
--arch_initcall(hsmc_init);
-+core_initcall(hsmc_init);
---- a/arch/avr32/mach-at32ap/intc.c
-+++ b/arch/avr32/mach-at32ap/intc.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2006 Atmel Corporation
-+ * Copyright (C) 2006, 2008 Atmel Corporation
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License version 2 as
-@@ -12,15 +12,20 @@
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/platform_device.h>
-+#include <linux/sysdev.h>
- 
--#include <asm/intc.h>
- #include <asm/io.h>
- 
- #include "intc.h"
- 
- struct intc {
--	void __iomem	*regs;
--	struct irq_chip	chip;
-+	void __iomem		*regs;
-+	struct irq_chip		chip;
-+	struct sys_device	sysdev;
-+#ifdef CONFIG_PM
-+	unsigned long		suspend_ipr;
-+	unsigned long		saved_ipr[64];
-+#endif
- };
- 
- extern struct platform_device at32_intc0_device;
-@@ -137,6 +142,74 @@ fail:
- 	panic("Interrupt controller initialization failed!\n");
- }
- 
-+#ifdef CONFIG_PM
-+void intc_set_suspend_handler(unsigned long offset)
-+{
-+	intc0.suspend_ipr = offset;
-+}
-+
-+static int intc_suspend(struct sys_device *sdev, pm_message_t state)
-+{
-+	struct intc *intc = container_of(sdev, struct intc, sysdev);
-+	int i;
-+
-+	if (unlikely(!irqs_disabled())) {
-+		pr_err("intc_suspend: called with interrupts enabled\n");
-+		return -EINVAL;
-+	}
-+
-+	if (unlikely(!intc->suspend_ipr)) {
-+		pr_err("intc_suspend: suspend_ipr not initialized\n");
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < 64; i++) {
-+		intc->saved_ipr[i] = intc_readl(intc, INTPR0 + 4 * i);
-+		intc_writel(intc, INTPR0 + 4 * i, intc->suspend_ipr);
-+	}
-+
-+	return 0;
-+}
-+
-+static int intc_resume(struct sys_device *sdev)
-+{
-+	struct intc *intc = container_of(sdev, struct intc, sysdev);
-+	int i;
-+
-+	WARN_ON(!irqs_disabled());
-+
-+	for (i = 0; i < 64; i++)
-+		intc_writel(intc, INTPR0 + 4 * i, intc->saved_ipr[i]);
-+
-+	return 0;
-+}
-+#else
-+#define intc_suspend	NULL
-+#define intc_resume	NULL
-+#endif
-+
-+static struct sysdev_class intc_class = {
-+	.name		= "intc",
-+	.suspend	= intc_suspend,
-+	.resume		= intc_resume,
-+};
-+
-+static int __init intc_init_sysdev(void)
-+{
-+	int ret;
-+
-+	ret = sysdev_class_register(&intc_class);
-+	if (ret)
-+		return ret;
-+
-+	intc0.sysdev.id = 0;
-+	intc0.sysdev.cls = &intc_class;
-+	ret = sysdev_register(&intc0.sysdev);
-+
-+	return ret;
-+}
-+device_initcall(intc_init_sysdev);
-+
- unsigned long intc_get_pending(unsigned int group)
- {
- 	return intc_readl(&intc0, INTREQ0 + 4 * group);
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pdc.c
-@@ -0,0 +1,48 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+static int __init pdc_probe(struct platform_device *pdev)
-+{
-+	struct clk *pclk, *hclk;
-+
-+	pclk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(pclk)) {
-+		dev_err(&pdev->dev, "no pclk defined\n");
-+		return PTR_ERR(pclk);
-+	}
-+	hclk = clk_get(&pdev->dev, "hclk");
-+	if (IS_ERR(hclk)) {
-+		dev_err(&pdev->dev, "no hclk defined\n");
-+		clk_put(pclk);
-+		return PTR_ERR(hclk);
-+	}
-+
-+	clk_enable(pclk);
-+	clk_enable(hclk);
-+
-+	dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
-+	return 0;
-+}
-+
-+static struct platform_driver pdc_driver = {
-+	.probe		= pdc_probe,
-+	.driver		= {
-+		.name	= "pdc",
-+	},
-+};
-+
-+static int __init pdc_init(void)
-+{
-+	return platform_driver_register(&pdc_driver);
-+}
-+arch_initcall(pdc_init);
---- a/arch/avr32/mach-at32ap/pio.c
-+++ b/arch/avr32/mach-at32ap/pio.c
-@@ -157,6 +157,82 @@ fail:
- 	dump_stack();
- }
- 
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port)
-+{
-+	return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
-+}
-+
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
-+{
-+	struct pio_device *pio;
-+	u32 old, new;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
-+
-+	/* Try to allocate the pins */
-+	do {
-+		old = pio->pinmux_mask;
-+		if (old & pins)
-+			return -EBUSY;
-+
-+		new = old | pins;
-+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+
-+	/* That went well, now configure the port */
-+	pio_writel(pio, OER, oe_mask);
-+	pio_writel(pio, PER, pins);
-+
-+	return 0;
-+}
-+
-+void at32_deselect_pins(unsigned int port, u32 pins)
-+{
-+	struct pio_device *pio;
-+	u32 old, new;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+	/* Return to a "safe" mux configuration */
-+	pio_writel(pio, PUER, pins);
-+	pio_writel(pio, ODR, pins);
-+
-+	/* Deallocate the pins */
-+	do {
-+		old = pio->pinmux_mask;
-+		new = old & ~pins;
-+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+}
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
-+{
-+	struct pio_device *pio;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+	return pio_readl(pio, PDSR) & pins;
-+}
-+
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
-+{
-+	struct pio_device *pio;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+	/* No atomic updates for now... */
-+	pio_writel(pio, CODR, ~value & mask);
-+	pio_writel(pio, SODR, value & mask);
-+}
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
-+
- /*--------------------------------------------------------------------------*/
- 
- /* GPIO API */
-@@ -318,6 +394,8 @@ static void pio_bank_show(struct seq_fil
- 		const char *label;
- 
- 		label = gpiochip_is_requested(chip, i);
-+		if (!label && (imr & mask))
-+			label = "[irq]";
- 		if (!label)
- 			continue;
- 
---- a/arch/avr32/mach-at32ap/pio.h
-+++ b/arch/avr32/mach-at32ap/pio.h
-@@ -57,7 +57,7 @@
- 
- /* Bitfields in IFDR */
- 
--/* Bitfields in ISFR */
-+/* Bitfields in IFSR */
- 
- /* Bitfields in SODR */
- 
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
-@@ -0,0 +1,174 @@
-+/*
-+ * Low-level Power Management code.
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/asm.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/thread_info.h>
-+#include <asm/arch/pm.h>
-+
-+#include "pm.h"
-+#include "sdramc.h"
-+
-+/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
-+#define PM_BASE	-0x100000
-+
-+	.section .bss, "wa", @nobits
-+	.global	disable_idle_sleep
-+	.type	disable_idle_sleep, @object
-+disable_idle_sleep:
-+	.int	4
-+	.size	disable_idle_sleep, . - disable_idle_sleep
-+
-+	/* Keep this close to the irq handlers */
-+	.section .irq.text, "ax", @progbits
-+
-+	/*
-+	 * void cpu_enter_idle(void)
-+	 *
-+	 * Put the CPU into "idle" mode, in which it will consume
-+	 * significantly less power.
-+	 *
-+	 * If an interrupt comes along in the window between
-+	 * unmask_interrupts and the sleep instruction below, the
-+	 * interrupt code will adjust the return address so that we
-+	 * never execute the sleep instruction. This is required
-+	 * because the AP7000 doesn't unmask interrupts when entering
-+	 * sleep modes; later CPUs may not need this workaround.
-+	 */
-+	.global	cpu_enter_idle
-+	.type	cpu_enter_idle, @function
-+cpu_enter_idle:
-+	mask_interrupts
-+	get_thread_info r8
-+	ld.w	r9, r8[TI_flags]
-+	bld	r9, TIF_NEED_RESCHED
-+	brcs	.Lret_from_sleep
-+	sbr	r9, TIF_CPU_GOING_TO_SLEEP
-+	st.w	r8[TI_flags], r9
-+	unmask_interrupts
-+	sleep	CPU_SLEEP_IDLE
-+	.size	cpu_idle_sleep, . - cpu_idle_sleep
-+
-+	/*
-+	 * Common return path for PM functions that don't run from
-+	 * SRAM.
-+	 */
-+	.global cpu_idle_skip_sleep
-+	.type	cpu_idle_skip_sleep, @function
-+cpu_idle_skip_sleep:
-+	mask_interrupts
-+	ld.w	r9, r8[TI_flags]
-+	cbr	r9, TIF_CPU_GOING_TO_SLEEP
-+	st.w	r8[TI_flags], r9
-+.Lret_from_sleep:
-+	unmask_interrupts
-+	retal	r12
-+	.size	cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
-+
-+#ifdef CONFIG_PM
-+	.section .init.text, "ax", @progbits
-+
-+	.global	pm_exception
-+	.type	pm_exception, @function
-+pm_exception:
-+	/*
-+	 * Exceptions are masked when we switch to this handler, so
-+	 * we'll only get "unrecoverable" exceptions (offset 0.)
-+	 */
-+	sub	r12, pc, . - .Lpanic_msg
-+	lddpc	pc, .Lpanic_addr
-+
-+	.align	2
-+.Lpanic_addr:
-+	.long	panic
-+.Lpanic_msg:
-+	.asciz	"Unrecoverable exception during suspend\n"
-+	.size	pm_exception, . - pm_exception
-+
-+	.global	pm_irq0
-+	.type	pm_irq0, @function
-+pm_irq0:
-+	/* Disable interrupts and return after the sleep instruction */
-+	mfsr	r9, SYSREG_RSR_INT0
-+	mtsr	SYSREG_RAR_INT0, r8
-+	sbr	r9, SYSREG_GM_OFFSET
-+	mtsr	SYSREG_RSR_INT0, r9
-+	rete
-+
-+	/*
-+	 * void cpu_enter_standby(unsigned long sdramc_base)
-+	 *
-+	 * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
-+	 * are suspended and interrupts are disabled. Interrupts
-+	 * marked as 'wakeup' event sources may still come along and
-+	 * get us out of here.
-+	 *
-+	 * The SDRAM will be put into self-refresh mode (which does
-+	 * not require a clock from the CPU), and the CPU will be put
-+	 * into "frozen" mode (HSB bus stopped). The SDRAM controller
-+	 * will automatically bring the SDRAM into normal mode on the
-+	 * first access, and the power manager will automatically
-+	 * start the HSB and CPU clocks upon a wakeup event.
-+	 *
-+	 * This code uses the same "skip sleep" technique as above.
-+	 * It is very important that we jump directly to
-+	 * cpu_after_sleep after the sleep instruction since that's
-+	 * where we'll end up if the interrupt handler decides that we
-+	 * need to skip the sleep instruction.
-+	 */
-+	.global	pm_standby
-+	.type	pm_standby, @function
-+pm_standby:
-+	/*
-+	 * interrupts are already masked at this point, and EVBA
-+	 * points to pm_exception above.
-+	 */
-+	ld.w	r10, r12[SDRAMC_LPR]
-+	sub	r8, pc, . - 1f		/* return address for irq handler */
-+	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
-+	bfins	r10, r11, 0, 2		/* LPCB <- self Refresh */
-+	sync	0			/* flush write buffer */
-+	st.w	r12[SDRAMC_LPR], r11	/* put SDRAM in self-refresh mode */
-+	ld.w	r11, r12[SDRAMC_LPR]
-+	unmask_interrupts
-+	sleep	CPU_SLEEP_FROZEN
-+1:	mask_interrupts
-+	retal	r12
-+	.size	pm_standby, . - pm_standby
-+
-+	.global	pm_suspend_to_ram
-+	.type	pm_suspend_to_ram, @function
-+pm_suspend_to_ram:
-+	/*
-+	 * interrupts are already masked at this point, and EVBA
-+	 * points to pm_exception above.
-+	 */
-+	mov	r11, 0
-+	cache	r11[2], 8		/* clean all dcache lines */
-+	sync	0			/* flush write buffer */
-+	ld.w	r10, r12[SDRAMC_LPR]
-+	sub	r8, pc, . - 1f		/* return address for irq handler */
-+	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
-+	bfins	r10, r11, 0, 2		/* LPCB <- self refresh */
-+	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
-+	ld.w	r11, r12[SDRAMC_LPR]
-+
-+	unmask_interrupts
-+	sleep	CPU_SLEEP_STOP
-+1:	mask_interrupts
-+
-+	retal	r12
-+	.size	pm_suspend_to_ram, . - pm_suspend_to_ram
-+
-+	.global	pm_sram_end
-+	.type	pm_sram_end, @function
-+pm_sram_end:
-+	.size	pm_sram_end, 0
-+
-+#endif /* CONFIG_PM */
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm.c
-@@ -0,0 +1,245 @@
-+/*
-+ * AVR32 AP Power Management
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ */
-+#include <linux/io.h>
-+#include <linux/suspend.h>
-+#include <linux/vmalloc.h>
-+
-+#include <asm/cacheflush.h>
-+#include <asm/sysreg.h>
-+
-+#include <asm/arch/pm.h>
-+#include <asm/arch/sram.h>
-+
-+/* FIXME: This is only valid for AP7000 */
-+#define SDRAMC_BASE	0xfff03800
-+
-+#include "sdramc.h"
-+
-+#define SRAM_PAGE_FLAGS	(SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1)	\
-+				| SYSREG_BF(AP, 3) | SYSREG_BIT(G))
-+
-+
-+static unsigned long	pm_sram_start;
-+static size_t		pm_sram_size;
-+static struct vm_struct	*pm_sram_area;
-+
-+static void (*avr32_pm_enter_standby)(unsigned long sdramc_base);
-+static void (*avr32_pm_enter_str)(unsigned long sdramc_base);
-+
-+/*
-+ * Must be called with interrupts disabled. Exceptions will be masked
-+ * on return (i.e. all exceptions will be "unrecoverable".)
-+ */
-+static void *avr32_pm_map_sram(void)
-+{
-+	unsigned long	vaddr;
-+	unsigned long	page_addr;
-+	u32		tlbehi;
-+	u32		mmucr;
-+
-+	vaddr = (unsigned long)pm_sram_area->addr;
-+	page_addr = pm_sram_start & PAGE_MASK;
-+
-+	/*
-+	 * Mask exceptions and grab the first TLB entry. We won't be
-+	 * needing it while sleeping.
-+	 */
-+	asm volatile("ssrf	%0" : : "i"(SYSREG_EM_OFFSET) : "memory");
-+
-+	mmucr = sysreg_read(MMUCR);
-+	tlbehi = sysreg_read(TLBEHI);
-+	sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
-+
-+	tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
-+	tlbehi |= vaddr & PAGE_MASK;
-+	tlbehi |= SYSREG_BIT(TLBEHI_V);
-+
-+	sysreg_write(TLBELO, page_addr | SRAM_PAGE_FLAGS);
-+	sysreg_write(TLBEHI, tlbehi);
-+	__builtin_tlbw();
-+
-+	return (void *)(vaddr + pm_sram_start - page_addr);
-+}
-+
-+/*
-+ * Must be called with interrupts disabled. Exceptions will be
-+ * unmasked on return.
-+ */
-+static void avr32_pm_unmap_sram(void)
-+{
-+	u32	mmucr;
-+	u32	tlbehi;
-+	u32	tlbarlo;
-+
-+	/* Going to update TLB entry at index 0 */
-+	mmucr = sysreg_read(MMUCR);
-+	tlbehi = sysreg_read(TLBEHI);
-+	sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
-+
-+	/* Clear the "valid" bit */
-+	tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
-+	sysreg_write(TLBEHI, tlbehi);
-+
-+	/* Mark it as "not accessed" */
-+	tlbarlo = sysreg_read(TLBARLO);
-+	sysreg_write(TLBARLO, tlbarlo | 0x80000000U);
-+
-+	/* Update the TLB */
-+	__builtin_tlbw();
-+
-+	/* Unmask exceptions */
-+	asm volatile("csrf	%0" : : "i"(SYSREG_EM_OFFSET) : "memory");
-+}
-+
-+static int avr32_pm_valid_state(suspend_state_t state)
-+{
-+	switch (state) {
-+	case PM_SUSPEND_ON:
-+	case PM_SUSPEND_STANDBY:
-+	case PM_SUSPEND_MEM:
-+		return 1;
-+
-+	default:
-+		return 0;
-+	}
-+}
-+
-+static int avr32_pm_enter(suspend_state_t state)
-+{
-+	u32		lpr_saved;
-+	u32		evba_saved;
-+	void		*sram;
-+
-+	switch (state) {
-+	case PM_SUSPEND_STANDBY:
-+		sram = avr32_pm_map_sram();
-+
-+		/* Switch to in-sram exception handlers */
-+		evba_saved = sysreg_read(EVBA);
-+		sysreg_write(EVBA, (unsigned long)sram);
-+
-+		/*
-+		 * Save the LPR register so that we can re-enable
-+		 * SDRAM Low Power mode on resume.
-+		 */
-+		lpr_saved = sdramc_readl(LPR);
-+		pr_debug("%s: Entering standby...\n", __func__);
-+		avr32_pm_enter_standby(SDRAMC_BASE);
-+		sdramc_writel(LPR, lpr_saved);
-+
-+		/* Switch back to regular exception handlers */
-+		sysreg_write(EVBA, evba_saved);
-+
-+		avr32_pm_unmap_sram();
-+		break;
-+
-+	case PM_SUSPEND_MEM:
-+		sram = avr32_pm_map_sram();
-+
-+		/* Switch to in-sram exception handlers */
-+		evba_saved = sysreg_read(EVBA);
-+		sysreg_write(EVBA, (unsigned long)sram);
-+
-+		/*
-+		 * Save the LPR register so that we can re-enable
-+		 * SDRAM Low Power mode on resume.
-+		 */
-+		lpr_saved = sdramc_readl(LPR);
-+		pr_debug("%s: Entering suspend-to-ram...\n", __func__);
-+		avr32_pm_enter_str(SDRAMC_BASE);
-+		sdramc_writel(LPR, lpr_saved);
-+
-+		/* Switch back to regular exception handlers */
-+		sysreg_write(EVBA, evba_saved);
-+
-+		avr32_pm_unmap_sram();
-+		break;
-+
-+	case PM_SUSPEND_ON:
-+		pr_debug("%s: Entering idle...\n", __func__);
-+		cpu_enter_idle();
-+		break;
-+
-+	default:
-+		pr_debug("%s: Invalid suspend state %d\n", __func__, state);
-+		goto out;
-+	}
-+
-+	pr_debug("%s: wakeup\n", __func__);
-+
-+out:
-+	return 0;
-+}
-+
-+static struct platform_suspend_ops avr32_pm_ops = {
-+	.valid	= avr32_pm_valid_state,
-+	.enter	= avr32_pm_enter,
-+};
-+
-+static unsigned long avr32_pm_offset(void *symbol)
-+{
-+	extern u8 pm_exception[];
-+
-+	return (unsigned long)symbol - (unsigned long)pm_exception;
-+}
-+
-+static int __init avr32_pm_init(void)
-+{
-+	extern u8 pm_exception[];
-+	extern u8 pm_irq0[];
-+	extern u8 pm_standby[];
-+	extern u8 pm_suspend_to_ram[];
-+	extern u8 pm_sram_end[];
-+	void *dst;
-+
-+	/*
-+	 * To keep things simple, we depend on not needing more than a
-+	 * single page.
-+	 */
-+	pm_sram_size = avr32_pm_offset(pm_sram_end);
-+	if (pm_sram_size > PAGE_SIZE)
-+		goto err;
-+
-+	pm_sram_start = sram_alloc(pm_sram_size);
-+	if (!pm_sram_start)
-+		goto err_alloc_sram;
-+
-+	/* Grab a virtual area we can use later on. */
-+	pm_sram_area = get_vm_area(pm_sram_size, VM_IOREMAP);
-+	if (!pm_sram_area)
-+		goto err_vm_area;
-+	pm_sram_area->phys_addr = pm_sram_start;
-+
-+	local_irq_disable();
-+	dst = avr32_pm_map_sram();
-+	memcpy(dst, pm_exception, pm_sram_size);
-+	flush_dcache_region(dst, pm_sram_size);
-+	invalidate_icache_region(dst, pm_sram_size);
-+	avr32_pm_unmap_sram();
-+	local_irq_enable();
-+
-+	avr32_pm_enter_standby = dst + avr32_pm_offset(pm_standby);
-+	avr32_pm_enter_str = dst + avr32_pm_offset(pm_suspend_to_ram);
-+	intc_set_suspend_handler(avr32_pm_offset(pm_irq0));
-+
-+	suspend_set_ops(&avr32_pm_ops);
-+
-+	printk("AVR32 AP Power Management enabled\n");
-+
-+	return 0;
-+
-+err_vm_area:
-+	sram_free(pm_sram_start, pm_sram_size);
-+err_alloc_sram:
-+err:
-+	pr_err("AVR32 Power Management initialization failed\n");
-+	return -ENOMEM;
-+}
-+arch_initcall(avr32_pm_init);
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/sdramc.h
-@@ -0,0 +1,76 @@
-+/*
-+ * Register definitions for the AT32AP SDRAM Controller
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ */
-+
-+/* Register offsets */
-+#define SDRAMC_MR			0x0000
-+#define SDRAMC_TR			0x0004
-+#define SDRAMC_CR			0x0008
-+#define SDRAMC_HSR			0x000c
-+#define SDRAMC_LPR			0x0010
-+#define SDRAMC_IER			0x0014
-+#define SDRAMC_IDR			0x0018
-+#define SDRAMC_IMR			0x001c
-+#define SDRAMC_ISR			0x0020
-+#define SDRAMC_MDR			0x0024
-+
-+/* MR - Mode Register */
-+#define SDRAMC_MR_MODE_NORMAL		(  0 <<  0)
-+#define SDRAMC_MR_MODE_NOP		(  1 <<  0)
-+#define SDRAMC_MR_MODE_BANKS_PRECHARGE	(  2 <<  0)
-+#define SDRAMC_MR_MODE_LOAD_MODE	(  3 <<  0)
-+#define SDRAMC_MR_MODE_AUTO_REFRESH	(  4 <<  0)
-+#define SDRAMC_MR_MODE_EXT_LOAD_MODE	(  5 <<  0)
-+#define SDRAMC_MR_MODE_POWER_DOWN	(  6 <<  0)
-+
-+/* CR - Configuration Register */
-+#define SDRAMC_CR_NC_8_BITS		(  0 <<  0)
-+#define SDRAMC_CR_NC_9_BITS		(  1 <<  0)
-+#define SDRAMC_CR_NC_10_BITS		(  2 <<  0)
-+#define SDRAMC_CR_NC_11_BITS		(  3 <<  0)
-+#define SDRAMC_CR_NR_11_BITS		(  0 <<  2)
-+#define SDRAMC_CR_NR_12_BITS		(  1 <<  2)
-+#define SDRAMC_CR_NR_13_BITS		(  2 <<  2)
-+#define SDRAMC_CR_NB_2_BANKS		(  0 <<  4)
-+#define SDRAMC_CR_NB_4_BANKS		(  1 <<  4)
-+#define SDRAMC_CR_CAS(x)		((x) <<  5)
-+#define SDRAMC_CR_DBW_32_BITS		(  0 <<  7)
-+#define SDRAMC_CR_DBW_16_BITS		(  1 <<  7)
-+#define SDRAMC_CR_TWR(x)		((x) <<  8)
-+#define SDRAMC_CR_TRC(x)		((x) << 12)
-+#define SDRAMC_CR_TRP(x)		((x) << 16)
-+#define SDRAMC_CR_TRCD(x)		((x) << 20)
-+#define SDRAMC_CR_TRAS(x)		((x) << 24)
-+#define SDRAMC_CR_TXSR(x)		((x) << 28)
-+
-+/* HSR - High Speed Register */
-+#define SDRAMC_HSR_DA			(  1 <<  0)
-+
-+/* LPR - Low Power Register */
-+#define SDRAMC_LPR_LPCB_INHIBIT		(  0 <<  0)
-+#define SDRAMC_LPR_LPCB_SELF_RFR	(  1 <<  0)
-+#define SDRAMC_LPR_LPCB_PDOWN		(  2 <<  0)
-+#define SDRAMC_LPR_LPCB_DEEP_PDOWN	(  3 <<  0)
-+#define SDRAMC_LPR_PASR(x)		((x) <<  4)
-+#define SDRAMC_LPR_TCSR(x)		((x) <<  8)
-+#define SDRAMC_LPR_DS(x)		((x) << 10)
-+#define SDRAMC_LPR_TIMEOUT(x)		((x) << 12)
-+
-+/* IER/IDR/IMR/ISR - Interrupt Enable/Disable/Mask/Status Register */
-+#define SDRAMC_ISR_RES			(  1 <<  0)
-+
-+/* MDR - Memory Device Register */
-+#define SDRAMC_MDR_MD_SDRAM		(  0 <<  0)
-+#define SDRAMC_MDR_MD_LOW_PWR_SDRAM	(  1 <<  0)
-+
-+/* Register access macros */
-+#define sdramc_readl(reg) \
-+	__raw_readl((void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
-+#define sdramc_writel(reg, value) \
-+	__raw_writel(value, (void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
---- a/arch/avr32/mach-at32ap/time-tc.c
-+++ /dev/null
-@@ -1,218 +0,0 @@
--/*
-- * Copyright (C) 2004-2007 Atmel Corporation
-- *
-- * Based on MIPS implementation arch/mips/kernel/time.c
-- *   Copyright 2001 MontaVista Software Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/clk.h>
--#include <linux/clocksource.h>
--#include <linux/time.h>
--#include <linux/module.h>
--#include <linux/interrupt.h>
--#include <linux/irq.h>
--#include <linux/kernel_stat.h>
--#include <linux/errno.h>
--#include <linux/init.h>
--#include <linux/profile.h>
--#include <linux/sysdev.h>
--#include <linux/err.h>
--
--#include <asm/div64.h>
--#include <asm/sysreg.h>
--#include <asm/io.h>
--#include <asm/sections.h>
--
--#include <asm/arch/time.h>
--
--/* how many counter cycles in a jiffy? */
--static u32 cycles_per_jiffy;
--
--/* the count value for the next timer interrupt */
--static u32 expirelo;
--
--/* the I/O registers of the TC module */
--static void __iomem *ioregs;
--
--cycle_t read_cycle_count(void)
--{
--	return (cycle_t)timer_read(ioregs, 0, CV);
--}
--
--struct clocksource clocksource_avr32 = {
--	.name		= "avr32",
--	.rating		= 342,
--	.read		= read_cycle_count,
--	.mask		= CLOCKSOURCE_MASK(16),
--	.shift		= 16,
--	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
--};
--
--static void avr32_timer_ack(void)
--{
--	u16 count = expirelo;
--
--	/* Ack this timer interrupt and set the next one, use a u16
--	 * variable so it will wrap around correctly */
--	count += cycles_per_jiffy;
--	expirelo = count;
--	timer_write(ioregs, 0, RC, expirelo);
--
--	/* Check to see if we have missed any timer interrupts */
--	count = timer_read(ioregs, 0, CV);
--	if ((count - expirelo) < 0x7fff) {
--		expirelo = count + cycles_per_jiffy;
--		timer_write(ioregs, 0, RC, expirelo);
--	}
--}
--
--u32 avr32_hpt_read(void)
--{
--	return timer_read(ioregs, 0, CV);
--}
--
--static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
--{
--	unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
--	unsigned int divs[] = { 4, 8, 16, 32 };
--	int divs_size = ARRAY_SIZE(divs);
--	int i = 0;
--	unsigned long count_hz;
--	unsigned long shift;
--	unsigned long mult;
--	int clock_div = -1;
--	u64 tmp;
--
--	shift = clocksource_avr32.shift;
--
--	do {
--		count_hz = clk_get_rate(pclk) / divs[i];
--		mult = clocksource_hz2mult(count_hz, shift);
--		clocksource_avr32.mult = mult;
--
--		tmp = TICK_NSEC;
--		tmp <<= shift;
--		tmp += mult / 2;
--		do_div(tmp, mult);
--
--		cycles_per_jiffy = tmp;
--	} while (cycles_per_jiffy > cycles_max && ++i < divs_size);
--
--	clock_div = i + 1;
--
--	if (clock_div > divs_size) {
--		pr_debug("timer: could not calculate clock divider\n");
--		return -EFAULT;
--	}
--
--	/* Set the clock divider */
--	timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
--
--	return 0;
--}
--
--int avr32_hpt_init(unsigned int count)
--{
--	struct resource *regs;
--	struct clk *pclk;
--	int irq = -1;
--	int ret = 0;
--
--	ret = -ENXIO;
--
--	irq = platform_get_irq(&at32_systc0_device, 0);
--	if (irq < 0) {
--		pr_debug("timer: could not get irq\n");
--		goto out_error;
--	}
--
--	pclk = clk_get(&at32_systc0_device.dev, "pclk");
--	if (IS_ERR(pclk)) {
--		pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
--		goto out_error;
--	}
--	clk_enable(pclk);
--
--	regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
--	if (!regs) {
--		pr_debug("timer: could not get resource\n");
--		goto out_error_clk;
--	}
--
--	ioregs = ioremap(regs->start, regs->end - regs->start + 1);
--	if (!ioregs) {
--		pr_debug("timer: could not get ioregs\n");
--		goto out_error_clk;
--	}
--
--	ret = avr32_timer_calc_div_and_set_jiffies(pclk);
--	if (ret)
--		goto out_error_io;
--
--	ret = setup_irq(irq, &timer_irqaction);
--	if (ret) {
--		pr_debug("timer: could not request irq %d: %d\n",
--				irq, ret);
--		goto out_error_io;
--	}
--
--	expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
--		* cycles_per_jiffy;
--
--	/* Enable clock and interrupts on RC compare */
--	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
--	timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
--	/* Set cycles to first interrupt */
--	timer_write(ioregs, 0,  RC, expirelo);
--
--	printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
--			ioregs, irq);
--
--	return 0;
--
--out_error_io:
--	iounmap(ioregs);
--out_error_clk:
--	clk_put(pclk);
--out_error:
--	return ret;
--}
--
--int avr32_hpt_start(void)
--{
--	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
--	return 0;
--}
--
--irqreturn_t timer_interrupt(int irq, void *dev_id)
--{
--	unsigned int sr = timer_read(ioregs, 0, SR);
--
--	if (sr & TIMER_BIT(SR_CPCS)) {
--		/* ack timer interrupt and try to set next interrupt */
--		avr32_timer_ack();
--
--		/*
--		 * Call the generic timer interrupt handler
--		 */
--		write_seqlock(&xtime_lock);
--		do_timer(1);
--		write_sequnlock(&xtime_lock);
--
--		/*
--		 * In UP mode, we call local_timer_interrupt() to do profiling
--		 * and process accounting.
--		 *
--		 * SMP is not supported yet.
--		 */
--		local_timer_interrupt(irq, dev_id);
--
--		return IRQ_HANDLED;
--	}
--
--	return IRQ_NONE;
--}
---- a/arch/avr32/mm/init.c
-+++ b/arch/avr32/mm/init.c
-@@ -11,6 +11,7 @@
- #include <linux/swap.h>
- #include <linux/init.h>
- #include <linux/mmzone.h>
-+#include <linux/module.h>
- #include <linux/bootmem.h>
- #include <linux/pagemap.h>
- #include <linux/nodemask.h>
-@@ -23,20 +24,20 @@
- #include <asm/setup.h>
- #include <asm/sections.h>
- 
-+#define __page_aligned	__attribute__((section(".data.page_aligned")))
-+
- DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
- 
--pgd_t swapper_pg_dir[PTRS_PER_PGD];
-+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
- 
- struct page *empty_zero_page;
-+EXPORT_SYMBOL(empty_zero_page);
- 
- /*
-  * Cache of MMU context last used.
-  */
- unsigned long mmu_context_cache = NO_CONTEXT;
- 
--#define START_PFN	(NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
--#define MAX_LOW_PFN	(NODE_DATA(0)->bdata->node_low_pfn)
--
- void show_mem(void)
- {
- 	int total = 0, reserved = 0, cached = 0;
-@@ -109,19 +110,9 @@ void __init paging_init(void)
- 	zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0),
- 						 PAGE_SIZE);
- 
--	{
--		pgd_t *pg_dir;
--		int i;
--
--		pg_dir = swapper_pg_dir;
--		sysreg_write(PTBR, (unsigned long)pg_dir);
--
--		for (i = 0; i < PTRS_PER_PGD; i++)
--			pgd_val(pg_dir[i]) = 0;
--
--		enable_mmu();
--		printk ("CPU: Paging enabled\n");
--	}
-+	sysreg_write(PTBR, (unsigned long)swapper_pg_dir);
-+	enable_mmu();
-+	printk ("CPU: Paging enabled\n");
- 
- 	for_each_online_node(nid) {
- 		pg_data_t *pgdat = NODE_DATA(nid);
---- a/arch/avr32/mm/tlb.c
-+++ b/arch/avr32/mm/tlb.c
-@@ -11,21 +11,21 @@
- 
- #include <asm/mmu_context.h>
- 
--#define _TLBEHI_I	0x100
-+/* TODO: Get the correct number from the CONFIG1 system register */
-+#define NR_TLB_ENTRIES 32
- 
--void show_dtlb_entry(unsigned int index)
-+static void show_dtlb_entry(unsigned int index)
- {
--	unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
-+	u32 tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
- 	unsigned long flags;
- 
- 	local_irq_save(flags);
- 	mmucr_save = sysreg_read(MMUCR);
- 	tlbehi_save = sysreg_read(TLBEHI);
--	mmucr = mmucr_save & 0x13;
--	mmucr |= index << 14;
-+	mmucr = SYSREG_BFINS(DRP, index, mmucr_save);
- 	sysreg_write(MMUCR, mmucr);
- 
--	asm volatile("tlbr" : : : "memory");
-+	__builtin_tlbr();
- 	cpu_sync_pipeline();
- 
- 	tlbehi = sysreg_read(TLBEHI);
-@@ -33,15 +33,17 @@ void show_dtlb_entry(unsigned int index)
- 
- 	printk("%2u: %c %c %02x   %05x %05x %o  %o  %c %c %c %c\n",
- 	       index,
--	       (tlbehi & 0x200)?'1':'0',
--	       (tlbelo & 0x100)?'1':'0',
--	       (tlbehi & 0xff),
--	       (tlbehi >> 12), (tlbelo >> 12),
--	       (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
--	       (tlbelo & 0x200)?'1':'0',
--	       (tlbelo & 0x080)?'1':'0',
--	       (tlbelo & 0x001)?'1':'0',
--	       (tlbelo & 0x002)?'1':'0');
-+	       SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
-+	       SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
-+	       SYSREG_BFEXT(ASID, tlbehi),
-+	       SYSREG_BFEXT(VPN, tlbehi) >> 2,
-+	       SYSREG_BFEXT(PFN, tlbelo) >> 2,
-+	       SYSREG_BFEXT(AP, tlbelo),
-+	       SYSREG_BFEXT(SZ, tlbelo),
-+	       SYSREG_BFEXT(TLBELO_C, tlbelo) ? 'C' : ' ',
-+	       SYSREG_BFEXT(B, tlbelo) ? 'B' : ' ',
-+	       SYSREG_BFEXT(W, tlbelo) ? 'W' : ' ',
-+	       SYSREG_BFEXT(TLBELO_D, tlbelo) ? 'D' : ' ');
- 
- 	sysreg_write(MMUCR, mmucr_save);
- 	sysreg_write(TLBEHI, tlbehi_save);
-@@ -54,29 +56,33 @@ void dump_dtlb(void)
- 	unsigned int i;
- 
- 	printk("ID  V G ASID VPN   PFN   AP SZ C B W D\n");
--	for (i = 0; i < 32; i++)
-+	for (i = 0; i < NR_TLB_ENTRIES; i++)
- 		show_dtlb_entry(i);
- }
- 
--static unsigned long last_mmucr;
--
--static inline void set_replacement_pointer(unsigned shift)
-+static void update_dtlb(unsigned long address, pte_t pte)
- {
--	unsigned long mmucr, mmucr_save;
-+	u32 tlbehi;
-+	u32 mmucr;
- 
--	mmucr = mmucr_save = sysreg_read(MMUCR);
-+	/*
-+	 * We're not changing the ASID here, so no need to flush the
-+	 * pipeline.
-+	 */
-+	tlbehi = sysreg_read(TLBEHI);
-+	tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
-+	tlbehi |= address & MMU_VPN_MASK;
-+	tlbehi |= SYSREG_BIT(TLBEHI_V);
-+	sysreg_write(TLBEHI, tlbehi);
- 
- 	/* Does this mapping already exist? */
--	__asm__ __volatile__(
--		"	tlbs\n"
--		"	mfsr %0, %1"
--		: "=r"(mmucr)
--		: "i"(SYSREG_MMUCR));
-+	__builtin_tlbs();
-+	mmucr = sysreg_read(MMUCR);
- 
- 	if (mmucr & SYSREG_BIT(MMUCR_N)) {
- 		/* Not found -- pick a not-recently-accessed entry */
--		unsigned long rp;
--		unsigned long tlbar = sysreg_read(TLBARLO);
-+		unsigned int rp;
-+		u32 tlbar = sysreg_read(TLBARLO);
- 
- 		rp = 32 - fls(tlbar);
- 		if (rp == 32) {
-@@ -84,30 +90,14 @@ static inline void set_replacement_point
- 			sysreg_write(TLBARLO, -1L);
- 		}
- 
--		mmucr &= 0x13;
--		mmucr |= (rp << shift);
--
-+		mmucr = SYSREG_BFINS(DRP, rp, mmucr);
- 		sysreg_write(MMUCR, mmucr);
- 	}
- 
--	last_mmucr = mmucr;
--}
--
--static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid)
--{
--	unsigned long vpn;
--
--	vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid;
--	sysreg_write(TLBEHI, vpn);
--	cpu_sync_pipeline();
--
--	set_replacement_pointer(14);
--
- 	sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK);
- 
- 	/* Let's go */
--	asm volatile("nop\n\ttlbw" : : : "memory");
--	cpu_sync_pipeline();
-+	__builtin_tlbw();
- }
- 
- void update_mmu_cache(struct vm_area_struct *vma,
-@@ -120,39 +110,40 @@ void update_mmu_cache(struct vm_area_str
- 		return;
- 
- 	local_irq_save(flags);
--	update_dtlb(address, pte, get_asid());
-+	update_dtlb(address, pte);
- 	local_irq_restore(flags);
- }
- 
--void __flush_tlb_page(unsigned long asid, unsigned long page)
-+static void __flush_tlb_page(unsigned long asid, unsigned long page)
- {
--	unsigned long mmucr, tlbehi;
-+	u32 mmucr, tlbehi;
- 
--	page |= asid;
--	sysreg_write(TLBEHI, page);
--	cpu_sync_pipeline();
--	asm volatile("tlbs");
-+	/*
-+	 * Caller is responsible for masking out non-PFN bits in page
-+	 * and changing the current ASID if necessary. This means that
-+	 * we don't need to flush the pipeline after writing TLBEHI.
-+	 */
-+	tlbehi = page | asid;
-+	sysreg_write(TLBEHI, tlbehi);
-+
-+	__builtin_tlbs();
- 	mmucr = sysreg_read(MMUCR);
- 
- 	if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
--		unsigned long tlbarlo;
--		unsigned long entry;
-+		unsigned int entry;
-+		u32 tlbarlo;
- 
- 		/* Clear the "valid" bit */
--		tlbehi = sysreg_read(TLBEHI);
--		tlbehi &= ~_TLBEHI_VALID;
- 		sysreg_write(TLBEHI, tlbehi);
--		cpu_sync_pipeline();
- 
- 		/* mark the entry as "not accessed" */
--		entry = (mmucr >> 14) & 0x3f;
-+		entry = SYSREG_BFEXT(DRP, mmucr);
- 		tlbarlo = sysreg_read(TLBARLO);
--		tlbarlo |= (0x80000000 >> entry);
-+		tlbarlo |= (0x80000000UL >> entry);
- 		sysreg_write(TLBARLO, tlbarlo);
- 
- 		/* update the entry with valid bit clear */
--		asm volatile("tlbw");
--		cpu_sync_pipeline();
-+		__builtin_tlbw();
- 	}
- }
- 
-@@ -190,17 +181,22 @@ void flush_tlb_range(struct vm_area_stru
- 
- 		local_irq_save(flags);
- 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-+
- 		if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
- 			mm->context = NO_CONTEXT;
- 			if (mm == current->mm)
- 				activate_context(mm);
- 		} else {
--			unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK;
--			unsigned long saved_asid = MMU_NO_ASID;
-+			unsigned long asid;
-+			unsigned long saved_asid;
-+
-+			asid = mm->context & MMU_CONTEXT_ASID_MASK;
-+			saved_asid = MMU_NO_ASID;
- 
- 			start &= PAGE_MASK;
- 			end += (PAGE_SIZE - 1);
- 			end &= PAGE_MASK;
-+
- 			if (mm != current->mm) {
- 				saved_asid = get_asid();
- 				set_asid(asid);
-@@ -218,33 +214,34 @@ void flush_tlb_range(struct vm_area_stru
- }
- 
- /*
-- * TODO: If this is only called for addresses > TASK_SIZE, we can probably
-- * skip the ASID stuff and just use the Global bit...
-+ * This function depends on the pages to be flushed having the G
-+ * (global) bit set in their pte. This is true for all
-+ * PAGE_KERNEL(_RO) pages.
-  */
- void flush_tlb_kernel_range(unsigned long start, unsigned long end)
- {
- 	unsigned long flags;
- 	int size;
- 
--	local_irq_save(flags);
- 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- 	if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
- 		flush_tlb_all();
- 	} else {
--		unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK;
--		unsigned long saved_asid = get_asid();
-+		unsigned long asid;
-+
-+		local_irq_save(flags);
-+		asid = get_asid();
- 
- 		start &= PAGE_MASK;
- 		end += (PAGE_SIZE - 1);
- 		end &= PAGE_MASK;
--		set_asid(asid);
-+
- 		while (start < end) {
- 			__flush_tlb_page(asid, start);
- 			start += PAGE_SIZE;
- 		}
--		set_asid(saved_asid);
-+		local_irq_restore(flags);
- 	}
--	local_irq_restore(flags);
- }
- 
- void flush_tlb_mm(struct mm_struct *mm)
-@@ -280,7 +277,7 @@ static void *tlb_start(struct seq_file *
- {
- 	static unsigned long tlb_index;
- 
--	if (*pos >= 32)
-+	if (*pos >= NR_TLB_ENTRIES)
- 		return NULL;
- 
- 	tlb_index = 0;
-@@ -291,7 +288,7 @@ static void *tlb_next(struct seq_file *t
- {
- 	unsigned long *index = v;
- 
--	if (*index >= 31)
-+	if (*index >= NR_TLB_ENTRIES - 1)
- 		return NULL;
- 
- 	++*pos;
-@@ -313,16 +310,16 @@ static int tlb_show(struct seq_file *tlb
- 	if (*index == 0)
- 		seq_puts(tlb, "ID  V G ASID VPN   PFN   AP SZ C B W D\n");
- 
--	BUG_ON(*index >= 32);
-+	BUG_ON(*index >= NR_TLB_ENTRIES);
- 
- 	local_irq_save(flags);
- 	mmucr_save = sysreg_read(MMUCR);
- 	tlbehi_save = sysreg_read(TLBEHI);
--	mmucr = mmucr_save & 0x13;
--	mmucr |= *index << 14;
-+	mmucr = SYSREG_BFINS(DRP, *index, mmucr_save);
- 	sysreg_write(MMUCR, mmucr);
- 
--	asm volatile("tlbr" : : : "memory");
-+	/* TLBR might change the ASID */
-+	__builtin_tlbr();
- 	cpu_sync_pipeline();
- 
- 	tlbehi = sysreg_read(TLBEHI);
-@@ -334,16 +331,18 @@ static int tlb_show(struct seq_file *tlb
- 	local_irq_restore(flags);
- 
- 	seq_printf(tlb, "%2lu: %c %c %02x   %05x %05x %o  %o  %c %c %c %c\n",
--	       *index,
--	       (tlbehi & 0x200)?'1':'0',
--	       (tlbelo & 0x100)?'1':'0',
--	       (tlbehi & 0xff),
--	       (tlbehi >> 12), (tlbelo >> 12),
--	       (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
--	       (tlbelo & 0x200)?'1':'0',
--	       (tlbelo & 0x080)?'1':'0',
--	       (tlbelo & 0x001)?'1':'0',
--	       (tlbelo & 0x002)?'1':'0');
-+		   *index,
-+		   SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
-+		   SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
-+		   SYSREG_BFEXT(ASID, tlbehi),
-+		   SYSREG_BFEXT(VPN, tlbehi) >> 2,
-+		   SYSREG_BFEXT(PFN, tlbelo) >> 2,
-+		   SYSREG_BFEXT(AP, tlbelo),
-+		   SYSREG_BFEXT(SZ, tlbelo),
-+		   SYSREG_BFEXT(TLBELO_C, tlbelo) ? '1' : '0',
-+		   SYSREG_BFEXT(B, tlbelo) ? '1' : '0',
-+		   SYSREG_BFEXT(W, tlbelo) ? '1' : '0',
-+		   SYSREG_BFEXT(TLBELO_D, tlbelo) ? '1' : '0');
- 
- 	return 0;
- }
---- a/arch/avr32/oprofile/op_model_avr32.c
-+++ b/arch/avr32/oprofile/op_model_avr32.c
-@@ -16,7 +16,6 @@
- #include <linux/sched.h>
- #include <linux/types.h>
- 
--#include <asm/intc.h>
- #include <asm/sysreg.h>
- #include <asm/system.h>
- 
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -706,7 +706,7 @@ config NVRAM
- 
- config RTC
- 	tristate "Enhanced Real Time Clock Support"
--	depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390
-+	depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390 && !AVR32
- 	---help---
- 	  If you say Y here and create a character special file /dev/rtc with
- 	  major number 10 and minor number 135 using mknod ("man mknod"), you
-@@ -776,7 +776,7 @@ config SGI_IP27_RTC
- 
- config GEN_RTC
- 	tristate "Generic /dev/rtc emulation"
--	depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
-+	depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
- 	---help---
- 	  If you say Y here and create a character special file /dev/rtc with
- 	  major number 10 and minor number 135 using mknod ("man mknod"), you
---- a/drivers/char/keyboard.c
-+++ b/drivers/char/keyboard.c
-@@ -1033,7 +1033,8 @@ DECLARE_TASKLET_DISABLED(keyboard_taskle
- #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
-     defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
-     defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
--    (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
-+    (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\
-+    defined(CONFIG_AVR32)
- 
- #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
- 			((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001))
---- a/drivers/clocksource/Makefile
-+++ b/drivers/clocksource/Makefile
-@@ -1,3 +1,4 @@
-+obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
- obj-$(CONFIG_X86_CYCLONE_TIMER)	+= cyclone.o
- obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
- obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o
---- /dev/null
-+++ b/drivers/clocksource/tcb_clksrc.c
-@@ -0,0 +1,302 @@
-+#include <linux/init.h>
-+#include <linux/clocksource.h>
-+#include <linux/clockchips.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/ioport.h>
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_tc.h>
-+
-+
-+/*
-+ * We're configured to use a specific TC block, one that's not hooked
-+ * up to external hardware, to provide a time solution:
-+ *
-+ *   - Two channels combine to create a free-running 32 bit counter
-+ *     with a base rate of 5+ MHz, packaged as a clocksource (with
-+ *     resolution better than 200 nsec).
-+ *
-+ *   - The third channel may be used to provide a 16-bit clockevent
-+ *     source, used in either periodic or oneshot mode.  This runs
-+ *     at 32 KiHZ, and can handle delays of up to two seconds.
-+ *
-+ * A boot clocksource and clockevent source are also currently needed,
-+ * unless the relevant platforms (ARM/AT91, AVR32/AT32) are changed so
-+ * this code can be used when init_timers() is called, well before most
-+ * devices are set up.  (Some low end AT91 parts, which can run uClinux,
-+ * have only the timers in one TC block... they currently don't support
-+ * the tclib code, because of that initialization issue.)
-+ *
-+ * REVISIT behavior during system suspend states... we should disable
-+ * all clocks and save the power.  Easily done for clockevent devices,
-+ * but clocksources won't necessarily get the needed notifications.
-+ * For deeper system sleep states, this will be mandatory...
-+ */
-+
-+static void __iomem *tcaddr;
-+
-+static cycle_t tc_get_cycles(void)
-+{
-+	unsigned long	flags;
-+	u32		lower, upper;
-+
-+	raw_local_irq_save(flags);
-+	do {
-+		upper = __raw_readl(tcaddr + ATMEL_TC_REG(1, CV));
-+		lower = __raw_readl(tcaddr + ATMEL_TC_REG(0, CV));
-+	} while (upper != __raw_readl(tcaddr + ATMEL_TC_REG(1, CV)));
-+
-+	raw_local_irq_restore(flags);
-+	return (upper << 16) | lower;
-+}
-+
-+static struct clocksource clksrc = {
-+	.name           = "tcb_clksrc",
-+	.rating         = 200,
-+	.read           = tc_get_cycles,
-+	.mask           = CLOCKSOURCE_MASK(32),
-+	.shift          = 18,
-+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+#ifdef CONFIG_GENERIC_CLOCKEVENTS
-+
-+struct tc_clkevt_device {
-+	struct clock_event_device	clkevt;
-+	struct clk			*clk;
-+	void __iomem			*regs;
-+};
-+
-+static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
-+{
-+	return container_of(clkevt, struct tc_clkevt_device, clkevt);
-+}
-+
-+/* For now, we always use the 32K clock ... this optimizes for NO_HZ,
-+ * because using one of the divided clocks would usually mean the
-+ * tick rate can never be less than several dozen Hz (vs 0.5 Hz).
-+ *
-+ * A divided clock could be good for high resolution timers, since
-+ * 30.5 usec resolution can seem "low".
-+ */
-+static u32 timer_clock;
-+
-+static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
-+{
-+	struct tc_clkevt_device *tcd = to_tc_clkevt(d);
-+	void __iomem		*regs = tcd->regs;
-+
-+	if (tcd->clkevt.mode == CLOCK_EVT_MODE_PERIODIC
-+			|| tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
-+		__raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
-+		__raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
-+		clk_disable(tcd->clk);
-+	}
-+
-+	switch (m) {
-+
-+	/* By not making the gentime core emulate periodic mode on top
-+	 * of oneshot, we get lower overhead and improved accuracy.
-+	 */
-+	case CLOCK_EVT_MODE_PERIODIC:
-+		clk_enable(tcd->clk);
-+
-+		/* slow clock, count up to RC, then irq and restart */
-+		__raw_writel(timer_clock
-+				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
-+				regs + ATMEL_TC_REG(2, CMR));
-+		__raw_writel((32768 + HZ/2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
-+
-+		/* Enable clock and interrupts on RC compare */
-+		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
-+
-+		/* go go gadget! */
-+		__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
-+				regs + ATMEL_TC_REG(2, CCR));
-+		break;
-+
-+	case CLOCK_EVT_MODE_ONESHOT:
-+		clk_enable(tcd->clk);
-+
-+		/* slow clock, count up to RC, then irq and stop */
-+		__raw_writel(timer_clock | ATMEL_TC_CPCSTOP
-+				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
-+				regs + ATMEL_TC_REG(2, CMR));
-+		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
-+
-+		/* set_next_event() configures and starts the timer */
-+		break;
-+
-+	default:
-+		break;
-+	}
-+}
-+
-+static int tc_next_event(unsigned long delta, struct clock_event_device *d)
-+{
-+	__raw_writel(delta, tcaddr + ATMEL_TC_REG(2, RC));
-+
-+	/* go go gadget! */
-+	__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
-+			tcaddr + ATMEL_TC_REG(2, CCR));
-+	return 0;
-+}
-+
-+static struct tc_clkevt_device clkevt = {
-+	.clkevt	= {
-+		.name		= "tc_clkevt",
-+		.features	= CLOCK_EVT_FEAT_PERIODIC
-+					| CLOCK_EVT_FEAT_ONESHOT,
-+		.shift		= 32,
-+		/* Should be lower than at91rm9200's system timer */
-+		.rating		= 125,
-+		.cpumask	= CPU_MASK_CPU0,
-+		.set_next_event	= tc_next_event,
-+		.set_mode	= tc_mode,
-+	},
-+};
-+
-+static irqreturn_t ch2_irq(int irq, void *handle)
-+{
-+	struct tc_clkevt_device	*dev = handle;
-+	unsigned int		sr;
-+
-+	sr = __raw_readl(dev->regs + ATMEL_TC_REG(2, SR));
-+	if (sr & ATMEL_TC_CPCS) {
-+		dev->clkevt.event_handler(&dev->clkevt);
-+		return IRQ_HANDLED;
-+	}
-+
-+	return IRQ_NONE;
-+}
-+
-+static struct irqaction tc_irqaction = {
-+	.name		= "tc_clkevt",
-+	.flags		= IRQF_TIMER | IRQF_DISABLED,
-+	.handler	= ch2_irq,
-+};
-+
-+static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
-+{
-+	struct clk *t2_clk = tc->clk[2];
-+	int irq = tc->irq[2];
-+
-+	clkevt.regs = tc->regs;
-+	clkevt.clk = t2_clk;
-+	tc_irqaction.dev_id = &clkevt;
-+
-+	timer_clock = clk32k_divisor_idx;
-+
-+	clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
-+	clkevt.clkevt.max_delta_ns
-+		= clockevent_delta2ns(0xffff, &clkevt.clkevt);
-+	clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
-+
-+	setup_irq(irq, &tc_irqaction);
-+
-+	clockevents_register_device(&clkevt.clkevt);
-+}
-+
-+#else /* !CONFIG_GENERIC_CLOCKEVENTS */
-+
-+static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
-+{
-+	/* NOTHING */
-+}
-+
-+#endif
-+
-+static int __init tcb_clksrc_init(void)
-+{
-+	static char bootinfo[] __initdata
-+		= KERN_DEBUG "%s: tc%d at %d.%03d MHz\n";
-+
-+	struct platform_device *pdev;
-+	struct atmel_tc *tc;
-+	struct clk *t0_clk;
-+	u32 rate, divided_rate = 0;
-+	int best_divisor_idx = -1;
-+	int clk32k_divisor_idx = -1;
-+	int i;
-+
-+	tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK, clksrc.name);
-+	if (!tc) {
-+		pr_debug("can't alloc TC for clocksource\n");
-+		return -ENODEV;
-+	}
-+	tcaddr = tc->regs;
-+	pdev = tc->pdev;
-+
-+	t0_clk = tc->clk[0];
-+	clk_enable(t0_clk);
-+
-+	/* How fast will we be counting?  Pick something over 5 MHz.  */
-+	rate = (u32) clk_get_rate(t0_clk);
-+	for (i = 0; i < 5; i++) {
-+		unsigned divisor = atmel_tc_divisors[i];
-+		unsigned tmp;
-+
-+		/* remember 32 KiHz clock for later */
-+		if (!divisor) {
-+			clk32k_divisor_idx = i;
-+			continue;
-+		}
-+
-+		tmp = rate / divisor;
-+		pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp);
-+		if (best_divisor_idx > 0) {
-+			if (tmp < 5 * 1000 * 1000)
-+				continue;
-+		}
-+		divided_rate = tmp;
-+		best_divisor_idx = i;
-+	}
-+
-+	clksrc.mult = clocksource_hz2mult(divided_rate, clksrc.shift);
-+
-+	printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
-+			divided_rate / 1000000,
-+			((divided_rate + 500000) % 1000000) / 1000);
-+
-+	/* tclib will give us three clocks no matter what the
-+	 * underlying platform supports.
-+	 */
-+	clk_enable(tc->clk[1]);
-+
-+	/* channel 0:  waveform mode, input mclk/8, clock TIOA0 on overflow */
-+	__raw_writel(best_divisor_idx			/* likely divide-by-8 */
-+			| ATMEL_TC_WAVE
-+			| ATMEL_TC_WAVESEL_UP		/* free-run */
-+			| ATMEL_TC_ACPA_SET		/* TIOA0 rises at 0 */
-+			| ATMEL_TC_ACPC_CLEAR,		/* (duty cycle 50%) */
-+			tcaddr + ATMEL_TC_REG(0, CMR));
-+	__raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA));
-+	__raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC));
-+	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR));	/* no irqs */
-+	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
-+
-+	/* channel 1:  waveform mode, input TIOA0 */
-+	__raw_writel(ATMEL_TC_XC1			/* input: TIOA0 */
-+			| ATMEL_TC_WAVE
-+			| ATMEL_TC_WAVESEL_UP,		/* free-run */
-+			tcaddr + ATMEL_TC_REG(1, CMR));
-+	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR));	/* no irqs */
-+	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR));
-+
-+	/* chain channel 0 to channel 1, then reset all the timers */
-+	__raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR);
-+	__raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
-+
-+	/* and away we go! */
-+	clocksource_register(&clksrc);
-+
-+	/* channel 2:  periodic and oneshot timer support */
-+	setup_clkevents(tc, clk32k_divisor_idx);
-+
-+	return 0;
-+}
-+arch_initcall(tcb_clksrc_init);
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -88,6 +88,14 @@ config I2C_AT91
- 	  to support combined I2C messages.  Use the i2c-gpio driver
- 	  unless your system can cope with those limitations.
- 
-+config I2C_ATMELTWI
-+	tristate "Atmel Two-Wire Interface (TWI)"
-+	depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
-+	help
-+	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+	  AT91-based device and want to use its built-in TWI
-+	  functionality.
-+
- config I2C_AU1550
- 	tristate "Au1550/Au1200 SMBus interface"
- 	depends on SOC_AU1550 || SOC_AU1200
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
- obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
- 
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.c
-@@ -0,0 +1,436 @@
-+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes
-+ * <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
-+ * bugs removed, interrupt routine markedly rewritten
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#undef VERBOSE_DEBUG
-+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <linux/io.h>
-+
-+#include "i2c-atmeltwi.h"
-+
-+static unsigned int baudrate = 100 * 1000;
-+module_param(baudrate, uint, S_IRUGO);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
-+
-+
-+struct atmel_twi {
-+	void __iomem *regs;
-+	struct i2c_adapter adapter;
-+	struct clk *pclk;
-+	struct completion comp;
-+	u32 mask;
-+	u8 *buf;
-+	u16 len;
-+	u16 acks_left;
-+	int status;
-+	unsigned int irq;
-+
-+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
-+
-+/*
-+ * (Re)Initialize the TWI hardware registers.
-+ */
-+static int twi_hwinit(struct atmel_twi *twi)
-+{
-+	unsigned long cdiv, ckdiv = 0;
-+
-+	/* REVISIT: wait till SCL is high before resetting; otherwise,
-+	 * some versions will wedge forever.
-+	 */
-+
-+	twi_writel(twi, IDR, ~0UL);
-+	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
-+	twi_readl(twi, SR);
-+
-+	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
-+
-+	while (cdiv > 255) {
-+		ckdiv++;
-+		cdiv = cdiv >> 1;
-+	}
-+
-+	/* REVISIT: there are various errata to consider re CDIV and CHDIV
-+	 * here, at least on at91 parts.
-+	 */
-+
-+	if (ckdiv > 7)
-+		return -EINVAL;
-+	else
-+		twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
-+				| TWI_BF(CHDIV, cdiv)
-+				| TWI_BF(CLDIV, cdiv));
-+	return 0;
-+}
-+
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
-+ * limit, but I2C has no limit at all.
-+ */
-+static int twi_complete(struct atmel_twi *twi, u32 mask)
-+{
-+	int timeout = msecs_to_jiffies(100);
-+
-+	mask |= TWI_BIT(TXCOMP);
-+	twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
-+	init_completion(&twi->comp);
-+
-+	twi_writel(twi, IER, mask);
-+
-+	if (!wait_for_completion_timeout(&twi->comp, timeout)) {
-+		/* RESET TWI interface */
-+		twi_writel(twi, CR, TWI_BIT(SWRST));
-+
-+		/* Reinitialize TWI */
-+		twi_hwinit(twi);
-+
-+		return -ETIMEDOUT;
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
-+{
-+	struct atmel_twi *twi = to_atmel_twi(adap);
-+	int i;
-+
-+	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
-+
-+	twi->status = 0;
-+	for (i = 0; i < num; i++, pmsg++) {
-+		twi->len = pmsg->len;
-+		twi->buf = pmsg->buf;
-+		twi->acks_left = pmsg->len;
-+		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
-+
-+		dev_dbg(&adap->dev,
-+			"#%d: %s %d byte%s %s dev 0x%02x\n",
-+			i,
-+			pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+			pmsg->len,
-+			pmsg->len > 1 ? "s" : "",
-+			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-+
-+		/* enable */
-+		twi_writel(twi, CR, TWI_BIT(MSEN));
-+
-+		if (pmsg->flags & I2C_M_RD) {
-+			/* cleanup after previous RX overruns */
-+			while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
-+				twi_readl(twi, RHR);
-+
-+			if (twi->len == 1)
-+				twi_writel(twi, CR,
-+					TWI_BIT(START) | TWI_BIT(STOP));
-+			else
-+				twi_writel(twi, CR, TWI_BIT(START));
-+
-+			if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
-+				dev_dbg(&adap->dev, "RX[%d] timeout. "
-+					"Stopped with %d bytes left\n",
-+					i, twi->acks_left);
-+				return -ETIMEDOUT;
-+			}
-+		} else {
-+			twi_writel(twi, THR, twi->buf[0]);
-+			twi->acks_left--;
-+			/* REVISIT: some chips don't start automagically:
-+			 * twi_writel(twi, CR, TWI_BIT(START));
-+			 */
-+			if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
-+				dev_dbg(&adap->dev, "TX[%d] timeout. "
-+					"Stopped with %d bytes left\n",
-+					i, twi->acks_left);
-+				return -ETIMEDOUT;
-+			}
-+			/* REVISIT: an erratum workaround may be needed here;
-+			 * see sam9261 "STOP not generated" (START either).
-+			 */
-+		}
-+
-+		/* Disable TWI interface */
-+		twi_writel(twi, CR, TWI_BIT(MSDIS));
-+
-+		if (twi->status)
-+			return twi->status;
-+
-+		/* WARNING:  This driver lies about properly supporting
-+		 * repeated start, or it would *ALWAYS* return here.  It
-+		 * has issued a STOP.  Continuing is a false claim -- that
-+		 * a second (or third, etc.) message is part of the same
-+		 * "combined" (no STOPs between parts) message.
-+		 */
-+
-+	} /* end cur msg */
-+
-+	return i;
-+}
-+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id)
-+{
-+	struct atmel_twi *twi = dev_id;
-+	int status = twi_readl(twi, SR);
-+
-+	/* Save state for later debug prints */
-+	int old_status = status;
-+
-+	if (twi->mask & status) {
-+
-+		status &= twi->mask;
-+
-+		if (status & TWI_BIT(RXRDY)) {
-+			if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
-+				/* Note weakness in fault reporting model:
-+				 * we can't say "the first N of these data
-+				 * bytes are valid".
-+				 */
-+				dev_err(&twi->adapter.dev,
-+					"OVERRUN RX! %04x, lost %d\n",
-+					old_status, twi->acks_left);
-+				twi->acks_left = 0;
-+				twi_writel(twi, CR, TWI_BIT(STOP));
-+				twi->status = -EOVERFLOW;
-+			} else if (twi->acks_left > 0) {
-+				twi->buf[twi->len - twi->acks_left] =
-+					twi_readl(twi, RHR);
-+				twi->acks_left--;
-+			}
-+			if (status & TWI_BIT(TXCOMP))
-+				goto done;
-+			if (twi->acks_left == 1)
-+				twi_writel(twi, CR, TWI_BIT(STOP));
-+
-+		} else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
-+			goto done;
-+
-+		} else if (status & TWI_BIT(TXRDY)) {
-+			if (twi->acks_left > 0) {
-+				twi_writel(twi, THR,
-+					twi->buf[twi->len - twi->acks_left]);
-+				twi->acks_left--;
-+			} else
-+				twi_writel(twi, CR, TWI_BIT(STOP));
-+		}
-+
-+		if (twi->acks_left == 0)
-+			twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
-+	}
-+
-+	/* enabling this message helps trigger overruns/underruns ... */
-+	dev_vdbg(&twi->adapter.dev,
-+		"ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
-+		old_status,
-+		twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
-+		twi->acks_left);
-+
-+	return IRQ_HANDLED;
-+
-+done:
-+	/* Note weak fault reporting model:  we can't report how many
-+	 * bytes we sent before the NAK, or let upper layers choose
-+	 * whether to continue.  The I2C stack doesn't allow that...
-+	 */
-+	if (status & TWI_BIT(NACK)) {
-+		dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
-+			twi->acks_left);
-+		twi->status = -EPIPE;
-+
-+	/* TX underrun morphs automagically into a premature STOP;
-+	 * we'll probably observe UVRE even when it's not documented.
-+	 */
-+	} else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
-+		dev_err(&twi->adapter.dev, "UNDERRUN TX!  %04x, %d to go\n",
-+			old_status, twi->acks_left);
-+		twi->status = -ENOSR;
-+	}
-+
-+	twi_writel(twi, IDR, ~0UL);
-+	complete(&twi->comp);
-+
-+	dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
-+		old_status, twi->acks_left, twi->status);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * Return list of supported functionality.
-+ *
-+ * NOTE:  see warning above about repeated starts; this driver is falsely
-+ * claiming to support "combined" transfers.  The mid-message STOPs mean
-+ * some slaves will never work with this driver.  (Use i2c-gpio...)
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+	return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
-+		& ~I2C_FUNC_SMBUS_QUICK;
-+}
-+
-+static struct i2c_algorithm twi_algorithm = {
-+	.master_xfer	= twi_xfer,
-+	.functionality	= twi_func,
-+};
-+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __init twi_probe(struct platform_device *pdev)
-+{
-+	struct atmel_twi *twi;
-+	struct resource *regs;
-+	struct clk *pclk;
-+	struct i2c_adapter *adapter;
-+	int rc, irq;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+
-+	pclk = clk_get(&pdev->dev, "twi_pclk");
-+	if (IS_ERR(pclk))
-+		return PTR_ERR(pclk);
-+	clk_enable(pclk);
-+
-+	rc = -ENOMEM;
-+	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+	if (!twi) {
-+		dev_dbg(&pdev->dev, "can't allocate interface!\n");
-+		goto err_alloc_twi;
-+	}
-+
-+	twi->pclk = pclk;
-+	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!twi->regs)
-+		goto err_ioremap;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+	if (rc) {
-+		dev_dbg(&pdev->dev, "can't bind irq!\n");
-+		goto err_irq;
-+	}
-+	twi->irq = irq;
-+
-+	rc = twi_hwinit(twi);
-+	if (rc) {
-+		dev_err(&pdev->dev, "Unable to set baudrate\n");
-+		goto err_hw_init;
-+	}
-+
-+	adapter = &twi->adapter;
-+	sprintf(adapter->name, "TWI");
-+	adapter->algo = &twi_algorithm;
-+	adapter->class = I2C_CLASS_ALL;
-+	adapter->nr = pdev->id;
-+	adapter->dev.parent = &pdev->dev;
-+
-+	platform_set_drvdata(pdev, twi);
-+
-+	rc = i2c_add_numbered_adapter(adapter);
-+	if (rc) {
-+		dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
-+			adapter->name);
-+		goto err_register;
-+	}
-+
-+	dev_info(&pdev->dev,
-+		"Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
-+		 baudrate/1000, (unsigned long)regs->start);
-+
-+	return 0;
-+
-+
-+err_register:
-+	platform_set_drvdata(pdev, NULL);
-+
-+err_hw_init:
-+	free_irq(irq, twi);
-+
-+err_irq:
-+	iounmap(twi->regs);
-+
-+err_ioremap:
-+	kfree(twi);
-+
-+err_alloc_twi:
-+	clk_disable(pclk);
-+	clk_put(pclk);
-+
-+	return rc;
-+}
-+
-+static int __exit twi_remove(struct platform_device *pdev)
-+{
-+	struct atmel_twi *twi = platform_get_drvdata(pdev);
-+	int res;
-+
-+	platform_set_drvdata(pdev, NULL);
-+	res = i2c_del_adapter(&twi->adapter);
-+	twi_writel(twi, CR, TWI_BIT(MSDIS));
-+	iounmap(twi->regs);
-+	clk_disable(twi->pclk);
-+	clk_put(twi->pclk);
-+	free_irq(twi->irq, twi);
-+	kfree(twi);
-+
-+	return res;
-+}
-+
-+static struct platform_driver twi_driver = {
-+	.remove		= __exit_p(twi_remove),
-+	.driver		= {
-+		.name	= "atmel_twi",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init atmel_twi_init(void)
-+{
-+	return platform_driver_probe(&twi_driver, twi_probe);
-+}
-+
-+static void __exit atmel_twi_exit(void)
-+{
-+	platform_driver_unregister(&twi_driver);
-+}
-+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
-+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Register definitions for the Atmel Two-Wire Interface
-+ */
-+
-+#ifndef __ATMELTWI_H__
-+#define __ATMELTWI_H__
-+
-+/* TWI register offsets */
-+#define TWI_CR					0x0000
-+#define TWI_MMR					0x0004
-+#define TWI_SMR					0x0008
-+#define TWI_IADR				0x000c
-+#define TWI_CWGR				0x0010
-+#define TWI_SR					0x0020
-+#define TWI_IER					0x0024
-+#define TWI_IDR					0x0028
-+#define TWI_IMR					0x002c
-+#define TWI_RHR					0x0030
-+#define TWI_THR					0x0034
-+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET			0
-+#define TWI_START_SIZE				1
-+#define TWI_STOP_OFFSET				1
-+#define TWI_STOP_SIZE				1
-+#define TWI_MSEN_OFFSET				2
-+#define TWI_MSEN_SIZE				1
-+#define TWI_MSDIS_OFFSET			3
-+#define TWI_MSDIS_SIZE				1
-+#define TWI_SVEN_OFFSET				4
-+#define TWI_SVEN_SIZE				1
-+#define TWI_SVDIS_OFFSET			5
-+#define TWI_SVDIS_SIZE				1
-+#define TWI_SWRST_OFFSET			7
-+#define TWI_SWRST_SIZE				1
-+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET			8
-+#define TWI_IADRSZ_SIZE				2
-+#define TWI_MREAD_OFFSET			12
-+#define TWI_MREAD_SIZE				1
-+#define TWI_DADR_OFFSET				16
-+#define TWI_DADR_SIZE				7
-+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET				16
-+#define TWI_SADR_SIZE				7
-+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET				0
-+#define TWI_IADR_SIZE				24
-+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET			0
-+#define TWI_CLDIV_SIZE				8
-+#define TWI_CHDIV_OFFSET			8
-+#define TWI_CHDIV_SIZE				8
-+#define TWI_CKDIV_OFFSET			16
-+#define TWI_CKDIV_SIZE				3
-+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET			0
-+#define TWI_TXCOMP_SIZE				1
-+#define TWI_RXRDY_OFFSET			1
-+#define TWI_RXRDY_SIZE				1
-+#define TWI_TXRDY_OFFSET			2
-+#define TWI_TXRDY_SIZE				1
-+#define TWI_SVDIR_OFFSET			3
-+#define TWI_SVDIR_SIZE				1
-+#define TWI_SVACC_OFFSET			4
-+#define TWI_SVACC_SIZE				1
-+#define TWI_GCACC_OFFSET			5
-+#define TWI_GCACC_SIZE				1
-+#define TWI_OVRE_OFFSET				6
-+#define TWI_OVRE_SIZE				1
-+#define TWI_UNRE_OFFSET				7
-+#define TWI_UNRE_SIZE				1
-+#define TWI_NACK_OFFSET				8
-+#define TWI_NACK_SIZE				1
-+#define TWI_ARBLST_OFFSET			9
-+#define TWI_ARBLST_SIZE				1
-+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET			0
-+#define TWI_RXDATA_SIZE				8
-+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET			0
-+#define TWI_TXDATA_SIZE				8
-+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR			0
-+#define TWI_IADRSZ_ONE_BYTE			1
-+#define TWI_IADRSZ_TWO_BYTES			2
-+#define TWI_IADRSZ_THREE_BYTES			3
-+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name)					\
-+	(1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name, value)				\
-+	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
-+	 << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name, value)				\
-+	(((value) >> TWI_##name##_OFFSET)		\
-+	 & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name, value, old)			\
-+	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
-+		    << TWI_##name##_OFFSET))		\
-+	 | TWI_BF(name, (value)))
-+
-+/* Register access macros */
-+#define twi_readl(port, reg)				\
-+	__raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port, reg, value)			\
-+	__raw_writel((value), (port)->regs + TWI_##reg)
-+
-+#endif /* __ATMELTWI_H__ */
---- a/drivers/input/serio/Kconfig
-+++ b/drivers/input/serio/Kconfig
-@@ -88,6 +88,17 @@ config SERIO_RPCKBD
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called rpckbd.
- 
-+config SERIO_AT32PSIF
-+	tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
-+	depends on AVR32
-+	default n
-+	help
-+	  Say Y here if you want to use the PSIF peripheral on AVR32 devices
-+	  and connect a PS/2 keyboard and/or mouse to it.
-+
-+	  To compile this driver as a module, choose M here: the module will
-+	  be called at32psif.
-+
- config SERIO_AMBAKMI
- 	tristate "AMBA KMI keyboard controller"
- 	depends on ARM_AMBA
---- a/drivers/input/serio/Makefile
-+++ b/drivers/input/serio/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIO_CT82C710)	+= ct82c710
- obj-$(CONFIG_SERIO_RPCKBD)	+= rpckbd.o
- obj-$(CONFIG_SERIO_SA1111)	+= sa1111ps2.o
- obj-$(CONFIG_SERIO_AMBAKMI)	+= ambakmi.o
-+obj-$(CONFIG_SERIO_AT32PSIF)	+= at32psif.o
- obj-$(CONFIG_SERIO_Q40KBD)	+= q40kbd.o
- obj-$(CONFIG_SERIO_GSCPS2)	+= gscps2.o
- obj-$(CONFIG_HP_SDC)		+= hp_sdc.o
---- /dev/null
-+++ b/drivers/input/serio/at32psif.c
-@@ -0,0 +1,351 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Driver for the AT32AP700X PS/2 controller (PSIF).
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/serio.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+
-+#include "at32psif.h"
-+
-+#define PSIF_BUF_SIZE		16
-+
-+#define ring_is_empty(_psif)	(_psif->head == _psif->tail)
-+#define ring_next_head(_psif)	((_psif->head + 1) & (PSIF_BUF_SIZE - 1))
-+#define ring_next_tail(_psif)	((_psif->tail + 1) & (PSIF_BUF_SIZE - 1))
-+
-+struct psif {
-+	struct platform_device	*pdev;
-+	struct clk		*pclk;
-+	struct serio		*io;
-+	struct timer_list	tx_timer;
-+	void __iomem		*regs;
-+	unsigned int		irq;
-+	unsigned int		open;
-+	/* Prevent concurrent writes to circular buffer. */
-+	spinlock_t		lock;
-+	unsigned int		head;
-+	unsigned int		tail;
-+	unsigned char		buffer[PSIF_BUF_SIZE];
-+};
-+
-+static irqreturn_t psif_interrupt(int irq, void *_ptr)
-+{
-+	struct psif *psif = _ptr;
-+	int retval = IRQ_NONE;
-+	unsigned int io_flags = 0;
-+	unsigned long status;
-+
-+	status = psif_readl(psif, SR);
-+
-+	if (status & PSIF_BIT(RXRDY)) {
-+		unsigned char val = (unsigned char) psif_readl(psif, RHR);
-+
-+		if (status & PSIF_BIT(PARITY))
-+			io_flags |= SERIO_PARITY;
-+		if (status & PSIF_BIT(OVRUN))
-+			dev_err(&psif->pdev->dev, "overrun read error\n");
-+
-+		serio_interrupt(psif->io, val, io_flags);
-+
-+		retval = IRQ_HANDLED;
-+	}
-+
-+	spin_lock(&psif->lock);
-+
-+	if (status & PSIF_BIT(TXEMPTY)) {
-+		if (status & PSIF_BIT(NACK))
-+			dev_err(&psif->pdev->dev, "NACK error\n");
-+
-+		psif_writel(psif, IDR, PSIF_BIT(TXEMPTY));
-+
-+		if (!ring_is_empty(psif))
-+			mod_timer(&psif->tx_timer,
-+					jiffies + msecs_to_jiffies(1));
-+
-+		retval = IRQ_HANDLED;
-+	}
-+
-+	spin_unlock(&psif->lock);
-+
-+	return retval;
-+}
-+
-+static void psif_transmit_data(unsigned long data)
-+{
-+	struct psif *psif = (struct psif *)data;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&psif->lock, flags);
-+
-+	psif_writel(psif, THR, psif->buffer[psif->tail]);
-+	psif->tail = ring_next_tail(psif);
-+
-+	if (!ring_is_empty(psif))
-+		psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
-+
-+	spin_unlock_irqrestore(&psif->lock, flags);
-+}
-+
-+static int psif_write(struct serio *io, unsigned char val)
-+{
-+	struct psif *psif = io->port_data;
-+	unsigned long flags;
-+	unsigned int head;
-+
-+	spin_lock_irqsave(&psif->lock, flags);
-+
-+	head = ring_next_head(psif);
-+
-+	if (head != psif->tail) {
-+		psif->buffer[psif->head] = val;
-+		psif->head = head;
-+	} else {
-+		dev_err(&psif->pdev->dev, "underrun write error\n");
-+	}
-+
-+	spin_unlock_irqrestore(&psif->lock, flags);
-+
-+	/* Make sure TXEMPTY interrupt is enabled. */
-+	psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
-+
-+	return 0;
-+}
-+
-+static int psif_open(struct serio *io)
-+{
-+	struct psif *psif = io->port_data;
-+	int retval;
-+
-+	retval = clk_enable(psif->pclk);
-+	if (retval)
-+		goto out;
-+
-+	psif_writel(psif, CR, PSIF_BIT(CR_TXEN) | PSIF_BIT(CR_RXEN));
-+	psif_writel(psif, IER, PSIF_BIT(RXRDY));
-+
-+	psif->open = 1;
-+out:
-+	return retval;
-+}
-+
-+static void psif_close(struct serio *io)
-+{
-+	struct psif *psif = io->port_data;
-+
-+	psif->open = 0;
-+
-+	psif_writel(psif, IDR, ~0UL);
-+	psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
-+
-+	clk_disable(psif->pclk);
-+}
-+
-+static void psif_set_prescaler(struct psif *psif)
-+{
-+	unsigned long prscv;
-+	unsigned long rate = clk_get_rate(psif->pclk);
-+
-+	/* PRSCV = Pulse length (100 us) * PSIF module frequency. */
-+	prscv = 100 * (rate / 1000000UL);
-+
-+	if (prscv > ((1<<PSIF_PSR_PRSCV_SIZE) - 1)) {
-+		prscv = (1<<PSIF_PSR_PRSCV_SIZE) - 1;
-+		dev_dbg(&psif->pdev->dev, "pclk too fast, "
-+				"prescaler set to max\n");
-+	}
-+
-+	clk_enable(psif->pclk);
-+	psif_writel(psif, PSR, prscv);
-+	clk_disable(psif->pclk);
-+}
-+
-+static int __init psif_probe(struct platform_device *pdev)
-+{
-+	struct resource *regs;
-+	struct psif *psif;
-+	struct serio *io;
-+	struct clk *pclk;
-+	int irq;
-+	int ret;
-+
-+	psif = kzalloc(sizeof(struct psif), GFP_KERNEL);
-+	if (!psif) {
-+		dev_dbg(&pdev->dev, "out of memory\n");
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+	psif->pdev = pdev;
-+
-+	io = kzalloc(sizeof(struct serio), GFP_KERNEL);
-+	if (!io) {
-+		dev_dbg(&pdev->dev, "out of memory\n");
-+		ret = -ENOMEM;
-+		goto out_free_psif;
-+	}
-+	psif->io = io;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_dbg(&pdev->dev, "no mmio resources defined\n");
-+		ret = -ENOMEM;
-+		goto out_free_io;
-+	}
-+
-+	psif->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!psif->regs) {
-+		ret = -ENOMEM;
-+		dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+		goto out_free_io;
-+	}
-+
-+	pclk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(pclk)) {
-+		dev_dbg(&pdev->dev, "could not get peripheral clock\n");
-+		ret = PTR_ERR(pclk);
-+		goto out_iounmap;
-+	}
-+	psif->pclk = pclk;
-+
-+	/* Reset the PSIF to enter at a known state. */
-+	ret = clk_enable(pclk);
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "could not enable pclk\n");
-+		goto out_put_clk;
-+	}
-+	psif_writel(psif, CR, PSIF_BIT(CR_SWRST));
-+	clk_disable(pclk);
-+
-+	setup_timer(&psif->tx_timer, psif_transmit_data, (unsigned long)psif);
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0) {
-+		dev_dbg(&pdev->dev, "could not get irq\n");
-+		ret = -ENXIO;
-+		goto out_put_clk;
-+	}
-+	ret = request_irq(irq, psif_interrupt, IRQF_SHARED, "at32psif", psif);
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
-+		goto out_put_clk;
-+	}
-+	psif->irq = irq;
-+
-+	io->id.type	= SERIO_8042;
-+	io->write	= psif_write;
-+	io->open	= psif_open;
-+	io->close	= psif_close;
-+	strlcpy(io->name, pdev->dev.bus_id, sizeof(io->name));
-+	strlcpy(io->phys, pdev->dev.bus_id, sizeof(io->phys));
-+	io->port_data	= psif;
-+	io->dev.parent	= &pdev->dev;
-+
-+	psif_set_prescaler(psif);
-+
-+	spin_lock_init(&psif->lock);
-+	serio_register_port(psif->io);
-+	platform_set_drvdata(pdev, psif);
-+
-+	dev_info(&pdev->dev, "Atmel AVR32 PSIF PS/2 driver on 0x%08x irq %d\n",
-+			(int)psif->regs, psif->irq);
-+
-+	return 0;
-+
-+out_put_clk:
-+	clk_put(psif->pclk);
-+out_iounmap:
-+	iounmap(psif->regs);
-+out_free_io:
-+	kfree(io);
-+out_free_psif:
-+	kfree(psif);
-+out:
-+	return ret;
-+}
-+
-+static int __exit psif_remove(struct platform_device *pdev)
-+{
-+	struct psif *psif = platform_get_drvdata(pdev);
-+
-+	psif_writel(psif, IDR, ~0UL);
-+	psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
-+
-+	serio_unregister_port(psif->io);
-+	iounmap(psif->regs);
-+	free_irq(psif->irq, psif);
-+	clk_put(psif->pclk);
-+	kfree(psif);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int psif_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct psif *psif = platform_get_drvdata(pdev);
-+
-+	if (psif->open) {
-+		psif_writel(psif, CR, PSIF_BIT(CR_RXDIS) | PSIF_BIT(CR_TXDIS));
-+		clk_disable(psif->pclk);
-+	}
-+
-+	return 0;
-+}
-+
-+static int psif_resume(struct platform_device *pdev)
-+{
-+	struct psif *psif = platform_get_drvdata(pdev);
-+
-+	if (psif->open) {
-+		clk_enable(psif->pclk);
-+		psif_set_prescaler(psif);
-+		psif_writel(psif, CR, PSIF_BIT(CR_RXEN) | PSIF_BIT(CR_TXEN));
-+	}
-+
-+	return 0;
-+}
-+#else
-+#define psif_suspend	NULL
-+#define psif_resume	NULL
-+#endif
-+
-+static struct platform_driver psif_driver = {
-+	.remove		= __exit_p(psif_remove),
-+	.driver		= {
-+		.name	= "atmel_psif",
-+	},
-+	.suspend	= psif_suspend,
-+	.resume		= psif_resume,
-+};
-+
-+static int __init psif_init(void)
-+{
-+	return platform_driver_probe(&psif_driver, psif_probe);
-+}
-+
-+static void __exit psif_exit(void)
-+{
-+	platform_driver_unregister(&psif_driver);
-+}
-+
-+module_init(psif_init);
-+module_exit(psif_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/input/serio/at32psif.h
-@@ -0,0 +1,82 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Driver for the AT32AP700X PS/2 controller (PSIF).
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef _AT32PSIF_H
-+#define _AT32PSIF_H
-+
-+/* PSIF register offsets */
-+#define PSIF_CR				0x00
-+#define PSIF_RHR			0x04
-+#define PSIF_THR			0x08
-+#define PSIF_SR				0x10
-+#define PSIF_IER			0x14
-+#define PSIF_IDR			0x18
-+#define PSIF_IMR			0x1c
-+#define PSIF_PSR			0x24
-+
-+/* Bitfields in control register. */
-+#define PSIF_CR_RXDIS_OFFSET		1
-+#define PSIF_CR_RXDIS_SIZE		1
-+#define PSIF_CR_RXEN_OFFSET		0
-+#define PSIF_CR_RXEN_SIZE		1
-+#define PSIF_CR_SWRST_OFFSET		15
-+#define PSIF_CR_SWRST_SIZE		1
-+#define PSIF_CR_TXDIS_OFFSET		9
-+#define PSIF_CR_TXDIS_SIZE		1
-+#define PSIF_CR_TXEN_OFFSET		8
-+#define PSIF_CR_TXEN_SIZE		1
-+
-+/* Bitfields in interrupt disable, enable, mask and status register. */
-+#define PSIF_NACK_OFFSET		8
-+#define PSIF_NACK_SIZE			1
-+#define PSIF_OVRUN_OFFSET		5
-+#define PSIF_OVRUN_SIZE			1
-+#define PSIF_PARITY_OFFSET		9
-+#define PSIF_PARITY_SIZE		1
-+#define PSIF_RXRDY_OFFSET		4
-+#define PSIF_RXRDY_SIZE			1
-+#define PSIF_TXEMPTY_OFFSET		1
-+#define PSIF_TXEMPTY_SIZE		1
-+#define PSIF_TXRDY_OFFSET		0
-+#define PSIF_TXRDY_SIZE			1
-+
-+/* Bitfields in prescale register. */
-+#define PSIF_PSR_PRSCV_OFFSET		0
-+#define PSIF_PSR_PRSCV_SIZE		12
-+
-+/* Bitfields in receive hold register. */
-+#define PSIF_RHR_RXDATA_OFFSET		0
-+#define PSIF_RHR_RXDATA_SIZE		8
-+
-+/* Bitfields in transmit hold register. */
-+#define PSIF_THR_TXDATA_OFFSET		0
-+#define PSIF_THR_TXDATA_SIZE		8
-+
-+/* Bit manipulation macros */
-+#define PSIF_BIT(name)					\
-+	(1 << PSIF_##name##_OFFSET)
-+#define PSIF_BF(name, value)				\
-+	(((value) & ((1 << PSIF_##name##_SIZE) - 1))	\
-+	 << PSIF_##name##_OFFSET)
-+#define PSIF_BFEXT(name, value)\
-+	(((value) >> PSIF_##name##_OFFSET)		\
-+	 & ((1 << PSIF_##name##_SIZE) - 1))
-+#define PSIF_BFINS(name, value, old)			\
-+	(((old) & ~(((1 << PSIF_##name##_SIZE) - 1)	\
-+		    << PSIF_##name##_OFFSET))		\
-+	 | PSIF_BF(name, value))
-+
-+/* Register access macros */
-+#define psif_readl(port, reg)				\
-+	__raw_readl((port)->regs + PSIF_##reg)
-+#define psif_writel(port, reg, value)			\
-+	__raw_writel((value), (port)->regs + PSIF_##reg)
-+
-+#endif /* _AT32PSIF_H */
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -22,6 +22,39 @@ config ATMEL_PWM
- 	  purposes including software controlled power-efficent backlights
- 	  on LCD displays, motor control, and waveform generation.
- 
-+config ATMEL_TCLIB
-+	bool "Atmel AT32/AT91 Timer/Counter Library"
-+	depends on (AVR32 || ARCH_AT91)
-+	help
-+	  Select this if you want a library to allocate the Timer/Counter
-+	  blocks found on many Atmel processors.  This facilitates using
-+	  these blocks by different drivers despite processor differences.
-+
-+config ATMEL_TCB_CLKSRC
-+	bool "TC Block Clocksource"
-+	depends on ATMEL_TCLIB && GENERIC_TIME
-+	default y
-+	help
-+	  Select this to get a high precision clocksource based on a
-+	  TC block with a 5+ MHz base clock rate.  Two timer channels
-+	  are combined to make a single 32-bit timer.
-+
-+	  When GENERIC_CLOCKEVENTS is defined, the third timer channel
-+	  may be used as a clock event device supporting oneshot mode
-+	  (delays of up to two seconds) based on the 32 KiHz clock.
-+
-+config ATMEL_TCB_CLKSRC_BLOCK
-+	int
-+	depends on ATMEL_TCB_CLKSRC
-+	prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
-+	default 0
-+	range 0 1
-+	help
-+	  Some chips provide more than one TC block, so you have the
-+	  choice of which one to use for the clock framework.  The other
-+	  TC can be used for other purposes, such as PWM generation and
-+	  interval timing.
-+
- config IBM_ASM
- 	tristate "Device driver for IBM RSA service processor"
- 	depends on X86 && PCI && INPUT && EXPERIMENTAL
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_ACER_WMI)     += acer-wmi.o
- obj-$(CONFIG_ASUS_LAPTOP)     += asus-laptop.o
- obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
- obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
-+obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
- obj-$(CONFIG_TC1100_WMI)	+= tc1100-wmi.o
- obj-$(CONFIG_LKDTM)		+= lkdtm.o
- obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
---- /dev/null
-+++ b/drivers/misc/atmel_tclib.c
-@@ -0,0 +1,161 @@
-+#include <linux/atmel_tc.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+/* Number of bytes to reserve for the iomem resource */
-+#define ATMEL_TC_IOMEM_SIZE	256
-+
-+
-+/*
-+ * This is a thin library to solve the problem of how to portably allocate
-+ * one of the TC blocks.  For simplicity, it doesn't currently expect to
-+ * share individual timers between different drivers.
-+ */
-+
-+#if defined(CONFIG_AVR32)
-+/* AVR32 has these divide PBB */
-+const u8 atmel_tc_divisors[5] = { 0, 4, 8, 16, 32, };
-+EXPORT_SYMBOL(atmel_tc_divisors);
-+
-+#elif defined(CONFIG_ARCH_AT91)
-+/* AT91 has these divide MCK */
-+const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, };
-+EXPORT_SYMBOL(atmel_tc_divisors);
-+
-+#endif
-+
-+static DEFINE_SPINLOCK(tc_list_lock);
-+static LIST_HEAD(tc_list);
-+
-+/**
-+ * atmel_tc_alloc - allocate a specified TC block
-+ * @block: which block to allocate
-+ * @name: name to be associated with the iomem resource
-+ *
-+ * Caller allocates a block.  If it is available, a pointer to a
-+ * pre-initialized struct atmel_tc is returned. The caller can access
-+ * the registers directly through the "regs" field.
-+ */
-+struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
-+{
-+	struct atmel_tc		*tc;
-+	struct platform_device	*pdev = NULL;
-+	struct resource		*r;
-+
-+	spin_lock(&tc_list_lock);
-+	list_for_each_entry(tc, &tc_list, node) {
-+		if (tc->pdev->id == block) {
-+			pdev = tc->pdev;
-+			break;
-+		}
-+	}
-+
-+	if (!pdev || tc->iomem)
-+		goto fail;
-+
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name);
-+	if (!r)
-+		goto fail;
-+
-+	tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE);
-+	if (!tc->regs)
-+		goto fail_ioremap;
-+
-+	tc->iomem = r;
-+
-+out:
-+	spin_unlock(&tc_list_lock);
-+	return tc;
-+
-+fail_ioremap:
-+	release_resource(r);
-+fail:
-+	tc = NULL;
-+	goto out;
-+}
-+EXPORT_SYMBOL_GPL(atmel_tc_alloc);
-+
-+/**
-+ * atmel_tc_free - release a specified TC block
-+ * @tc: Timer/counter block that was returned by atmel_tc_alloc()
-+ *
-+ * This reverses the effect of atmel_tc_alloc(), unmapping the I/O
-+ * registers, invalidating the resource returned by that routine and
-+ * making the TC available to other drivers.
-+ */
-+void atmel_tc_free(struct atmel_tc *tc)
-+{
-+	spin_lock(&tc_list_lock);
-+	if (tc->regs) {
-+		iounmap(tc->regs);
-+		release_resource(tc->iomem);
-+		tc->regs = NULL;
-+		tc->iomem = NULL;
-+	}
-+	spin_unlock(&tc_list_lock);
-+}
-+EXPORT_SYMBOL_GPL(atmel_tc_free);
-+
-+static int __init tc_probe(struct platform_device *pdev)
-+{
-+	struct atmel_tc *tc;
-+	struct clk	*clk;
-+	int		irq;
-+
-+	if (!platform_get_resource(pdev, IORESOURCE_MEM, 0))
-+		return -EINVAL;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return -EINVAL;
-+
-+	tc = kzalloc(sizeof(struct atmel_tc), GFP_KERNEL);
-+	if (!tc)
-+		return -ENOMEM;
-+
-+	tc->pdev = pdev;
-+
-+	clk = clk_get(&pdev->dev, "t0_clk");
-+	if (IS_ERR(clk)) {
-+		kfree(tc);
-+		return -EINVAL;
-+	}
-+
-+	tc->clk[0] = clk;
-+	tc->clk[1] = clk_get(&pdev->dev, "t1_clk");
-+	if (IS_ERR(tc->clk[1]))
-+		tc->clk[1] = clk;
-+	tc->clk[2] = clk_get(&pdev->dev, "t2_clk");
-+	if (IS_ERR(tc->clk[2]))
-+		tc->clk[2] = clk;
-+
-+	tc->irq[0] = irq;
-+	tc->irq[1] = platform_get_irq(pdev, 1);
-+	if (tc->irq[1] < 0)
-+		tc->irq[1] = irq;
-+	tc->irq[2] = platform_get_irq(pdev, 2);
-+	if (tc->irq[2] < 0)
-+		tc->irq[2] = irq;
-+
-+	spin_lock(&tc_list_lock);
-+	list_add_tail(&tc->node, &tc_list);
-+	spin_unlock(&tc_list_lock);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver tc_driver = {
-+	.driver.name	= "atmel_tcb",
-+};
-+
-+static int __init tc_init(void)
-+{
-+	return platform_driver_probe(&tc_driver, tc_probe);
-+}
-+arch_initcall(tc_init);
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -91,6 +91,16 @@ config MMC_AT91
- 
- 	  If unsure, say N.
- 
-+config MMC_ATMELMCI
-+	tristate "Atmel Multimedia Card Interface support"
-+	depends on AVR32 && MMC
-+	help
-+	  This selects the Atmel Multimedia Card Interface. If you have
-+	  a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+	  slot, say Y or M here.
-+
-+	  If unsure, say N.
-+
- config MMC_IMX
- 	tristate "Motorola i.MX Multimedia Card Interface support"
- 	depends on ARCH_IMX
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
- obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
- obj-$(CONFIG_MMC_OMAP)		+= omap.o
- obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
- obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
- obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -0,0 +1,1234 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/blkdev.h>
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/mmc/host.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "atmel-mci.h"
-+
-+#define DRIVER_NAME "atmel_mci"
-+
-+#define MCI_DATA_ERROR_FLAGS	(MCI_BIT(DCRCE) | MCI_BIT(DTOE) |	\
-+				 MCI_BIT(OVRE) | MCI_BIT(UNRE))
-+
-+enum {
-+	EVENT_CMD_COMPLETE = 0,
-+	EVENT_DATA_COMPLETE,
-+	EVENT_DATA_ERROR,
-+	EVENT_STOP_SENT,
-+	EVENT_STOP_COMPLETE,
-+	EVENT_DMA_COMPLETE,
-+	EVENT_DMA_ERROR,
-+};
-+
-+struct atmel_mci_dma {
-+	struct dma_request_sg	req;
-+	unsigned short		rx_periph_id;
-+	unsigned short		tx_periph_id;
-+};
-+
-+struct atmel_mci {
-+	struct mmc_host		*mmc;
-+	void __iomem		*regs;
-+	struct atmel_mci_dma	dma;
-+
-+	struct mmc_request	*mrq;
-+	struct mmc_command	*cmd;
-+	struct mmc_data		*data;
-+
-+	u32			cmd_status;
-+	u32			data_status;
-+	u32			stop_status;
-+	u32			stop_cmdr;
-+
-+	struct tasklet_struct	tasklet;
-+	unsigned long		pending_events;
-+	unsigned long		completed_events;
-+
-+	int			present;
-+	int			detect_pin;
-+	int			wp_pin;
-+
-+	/* For detect pin debouncing */
-+	struct timer_list	detect_timer;
-+
-+	unsigned long		bus_hz;
-+	unsigned long		mapbase;
-+	struct clk		*mck;
-+	struct platform_device	*pdev;
-+
-+	int pending_stop;
-+#ifdef CONFIG_DEBUG_FS
-+	struct dentry		*debugfs_root;
-+	struct dentry		*debugfs_regs;
-+	struct dentry		*debugfs_req;
-+	struct dentry		*debugfs_pending_events;
-+	struct dentry		*debugfs_completed_events;
-+#endif
-+};
-+
-+/* Those printks take an awful lot of time... */
-+#ifndef DEBUG
-+static unsigned int fmax = 15000000U;
-+#else
-+static unsigned int fmax = 1000000U;
-+#endif
-+module_param(fmax, uint, 0444);
-+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
-+
-+/* Test bit macros for completed events */
-+#define mci_cmd_is_complete(host)			\
-+	test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_data_is_complete(host)			\
-+	test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_data_error_is_complete(host)		\
-+	test_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_stop_sent_is_complete(host)			\
-+	test_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_stop_is_complete(host)			\
-+	test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_dma_is_complete(host)			\
-+	test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
-+#define mci_dma_error_is_complete(host)			\
-+	test_bit(EVENT_DMA_ERROR, &host->completed_events)
-+
-+/* Test and clear bit macros for pending events */
-+#define mci_clear_cmd_is_pending(host)			\
-+	test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_data_is_pending(host)			\
-+	test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_is_pending(host)		\
-+	test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_is_pending(host)			\
-+	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_dma_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+
-+/* Test and set bit macros for completed events */
-+#define mci_set_cmd_is_completed(host)			\
-+	test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_data_is_completed(host)			\
-+	test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_is_completed(host)		\
-+	test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_is_completed(host)			\
-+	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_dma_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+
-+/* Set bit macros for completed events */
-+#define mci_set_cmd_complete(host)			\
-+	set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_data_complete(host)			\
-+	set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_complete(host)		\
-+	set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_complete(host)		\
-+	set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_complete(host)			\
-+	set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_dma_complete(host)			\
-+	set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
-+#define mci_set_dma_error_complete(host)		\
-+	set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+
-+/* Set bit macros for pending events */
-+#define mci_set_cmd_pending(host)			\
-+	set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_set_data_pending(host)			\
-+	set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_set_data_error_pending(host)		\
-+	set_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_set_stop_sent_pending(host)			\
-+	set_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_set_stop_pending(host)			\
-+	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_set_dma_error_pending(host)			\
-+	set_bit(EVENT_DMA_ERROR, &host->pending_events)
-+
-+/* Clear bit macros for pending events */
-+#define mci_clear_cmd_pending(host)			\
-+	clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_data_pending(host)			\
-+	clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_pending(host)		\
-+	clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_pending(host)		\
-+	clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_pending(host)			\
-+	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_dma_error_pending(host)		\
-+	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+
-+#define DBG_REQ_BUF_SIZE	(4096 - sizeof(unsigned int))
-+
-+struct req_dbg_data {
-+	unsigned int nbytes;
-+	char str[DBG_REQ_BUF_SIZE];
-+};
-+
-+static int req_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct atmel_mci *host;
-+	struct mmc_request *mrq;
-+	struct mmc_command *cmd, *stop;
-+	struct mmc_data *data;
-+	struct req_dbg_data *priv;
-+	char *str;
-+	unsigned long n = 0;
-+
-+	priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+	str = priv->str;
-+
-+	mutex_lock(&inode->i_mutex);
-+	host = inode->i_private;
-+
-+	spin_lock_irq(&host->mmc->lock);
-+	mrq = host->mrq;
-+	if (mrq) {
-+		cmd = mrq->cmd;
-+		data = mrq->data;
-+		stop = mrq->stop;
-+		n = snprintf(str, DBG_REQ_BUF_SIZE,
-+			     "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+			     cmd->opcode, cmd->arg, cmd->flags,
-+			     cmd->resp[0], cmd->resp[1], cmd->resp[2],
-+			     cmd->resp[3], cmd->error);
-+		if (n < DBG_REQ_BUF_SIZE && data)
-+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+				      "DATA %u * %u (%u) %x (err %u)\n",
-+				      data->blocks, data->blksz,
-+				      data->bytes_xfered, data->flags,
-+				      data->error);
-+		if (n < DBG_REQ_BUF_SIZE && stop)
-+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+				      "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+				      stop->opcode, stop->arg, stop->flags,
-+				      stop->resp[0], stop->resp[1],
-+				      stop->resp[2], stop->resp[3],
-+				      stop->error);
-+	}
-+	spin_unlock_irq(&host->mmc->lock);
-+	mutex_unlock(&inode->i_mutex);
-+
-+	priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
-+	file->private_data = priv;
-+
-+	return 0;
-+}
-+
-+static ssize_t req_dbg_read(struct file *file, char __user *buf,
-+			    size_t nbytes, loff_t *ppos)
-+{
-+	struct req_dbg_data *priv = file->private_data;
-+
-+	return simple_read_from_buffer(buf, nbytes, ppos,
-+				       priv->str, priv->nbytes);
-+}
-+
-+static int req_dbg_release(struct inode *inode, struct file *file)
-+{
-+	kfree(file->private_data);
-+	return 0;
-+}
-+
-+static const struct file_operations req_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= req_dbg_open,
-+	.llseek		= no_llseek,
-+	.read		= req_dbg_read,
-+	.release	= req_dbg_release,
-+};
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct atmel_mci *host;
-+	unsigned int i;
-+	u32 *data;
-+	int ret = -ENOMEM;
-+
-+	mutex_lock(&inode->i_mutex);
-+	host = inode->i_private;
-+	data = kmalloc(inode->i_size, GFP_KERNEL);
-+	if (!data)
-+		goto out;
-+
-+	spin_lock_irq(&host->mmc->lock);
-+	for (i = 0; i < inode->i_size / 4; i++)
-+		data[i] = __raw_readl(host->regs + i * 4);
-+	spin_unlock_irq(&host->mmc->lock);
-+
-+	file->private_data = data;
-+	ret = 0;
-+
-+out:
-+	mutex_unlock(&inode->i_mutex);
-+
-+	return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+			     size_t nbytes, loff_t *ppos)
-+{
-+	struct inode *inode = file->f_dentry->d_inode;
-+	int ret;
-+
-+	mutex_lock(&inode->i_mutex);
-+	ret = simple_read_from_buffer(buf, nbytes, ppos,
-+				      file->private_data,
-+				      file->f_dentry->d_inode->i_size);
-+	mutex_unlock(&inode->i_mutex);
-+
-+	return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+	kfree(file->private_data);
-+	return 0;
-+}
-+
-+static const struct file_operations regs_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= regs_dbg_open,
-+	.llseek		= generic_file_llseek,
-+	.read		= regs_dbg_read,
-+	.release	= regs_dbg_release,
-+};
-+
-+static void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+	struct mmc_host *mmc;
-+	struct dentry *root, *regs;
-+	struct resource *res;
-+
-+	mmc = host->mmc;
-+	root = debugfs_create_dir(mmc_hostname(mmc), NULL);
-+	if (IS_ERR(root) || !root)
-+		goto err_root;
-+	host->debugfs_root = root;
-+
-+	regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
-+	if (!regs)
-+		goto err_regs;
-+
-+	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-+	regs->d_inode->i_size = res->end - res->start + 1;
-+	host->debugfs_regs = regs;
-+
-+	host->debugfs_req = debugfs_create_file("req", 0400, root,
-+						host, &req_dbg_fops);
-+	if (!host->debugfs_req)
-+		goto err_req;
-+
-+	host->debugfs_pending_events
-+		= debugfs_create_u32("pending_events", 0400, root,
-+				     (u32 *)&host->pending_events);
-+	if (!host->debugfs_pending_events)
-+		goto err_pending_events;
-+
-+	host->debugfs_completed_events
-+		= debugfs_create_u32("completed_events", 0400, root,
-+				     (u32 *)&host->completed_events);
-+	if (!host->debugfs_completed_events)
-+		goto err_completed_events;
-+
-+	return;
-+
-+err_completed_events:
-+	debugfs_remove(host->debugfs_pending_events);
-+err_pending_events:
-+	debugfs_remove(host->debugfs_req);
-+err_req:
-+	debugfs_remove(host->debugfs_regs);
-+err_regs:
-+	debugfs_remove(host->debugfs_root);
-+err_root:
-+	host->debugfs_root = NULL;
-+	dev_err(&host->pdev->dev,
-+		"failed to initialize debugfs for %s\n",
-+		mmc_hostname(mmc));
-+}
-+
-+static void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+	if (host->debugfs_root) {
-+		debugfs_remove(host->debugfs_completed_events);
-+		debugfs_remove(host->debugfs_pending_events);
-+		debugfs_remove(host->debugfs_req);
-+		debugfs_remove(host->debugfs_regs);
-+		debugfs_remove(host->debugfs_root);
-+		host->debugfs_root = NULL;
-+	}
-+}
-+#else
-+static inline void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+
-+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+#endif /* CONFIG_DEBUG_FS */
-+
-+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-+					unsigned int ns)
-+{
-+	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
-+}
-+
-+static void atmci_set_timeout(struct atmel_mci *host,
-+			      struct mmc_data *data)
-+{
-+	static unsigned dtomul_to_shift[] = {
-+		0, 4, 7, 8, 10, 12, 16, 20
-+	};
-+	unsigned timeout;
-+	unsigned dtocyc, dtomul;
-+
-+	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
-+
-+	for (dtomul = 0; dtomul < 8; dtomul++) {
-+		unsigned shift = dtomul_to_shift[dtomul];
-+		dtocyc = (timeout + (1 << shift) - 1) >> shift;
-+		if (dtocyc < 15)
-+			break;
-+	}
-+
-+	if (dtomul >= 8) {
-+		dtomul = 7;
-+		dtocyc = 15;
-+	}
-+
-+	dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
-+			dtocyc << dtomul_to_shift[dtomul]);
-+	mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
-+				| MCI_BF(DTOCYC, dtocyc)));
-+}
-+
-+/*
-+ * Return mask with command flags to be enabled for this command.
-+ */
-+static u32 atmci_prepare_command(struct mmc_host *mmc,
-+				 struct mmc_command *cmd)
-+{
-+	u32 cmdr;
-+
-+	cmd->error = 0;
-+
-+	cmdr = MCI_BF(CMDNB, cmd->opcode);
-+
-+	if (cmd->flags & MMC_RSP_PRESENT) {
-+		if (cmd->flags & MMC_RSP_136)
-+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
-+		else
-+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
-+	}
-+
-+	/*
-+	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
-+	 * it's too difficult to determine whether this is an ACMD or
-+	 * not. Better make it 64.
-+	 */
-+	cmdr |= MCI_BIT(MAXLAT);
-+
-+	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-+		cmdr |= MCI_BIT(OPDCMD);
-+
-+	dev_dbg(&mmc->class_dev,
-+		"cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+		cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
-+
-+	return cmdr;
-+}
-+
-+static void atmci_start_command(struct atmel_mci *host,
-+				struct mmc_command *cmd,
-+				u32 cmd_flags)
-+{
-+	WARN_ON(host->cmd);
-+	host->cmd = cmd;
-+
-+	mci_writel(host, ARGR, cmd->arg);
-+	mci_writel(host, CMDR, cmd_flags);
-+
-+	if (cmd->data)
-+		dma_start_request(host->dma.req.req.dmac,
-+				  host->dma.req.req.channel);
-+}
-+
-+/*
-+ * Returns a mask of flags to be set in the command register when the
-+ * command to start the transfer is to be sent.
-+ */
-+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	u32 cmd_flags;
-+
-+	WARN_ON(host->data);
-+	host->data = data;
-+
-+	atmci_set_timeout(host, data);
-+	mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
-+				| MCI_BF(BLKLEN, data->blksz)));
-+	host->dma.req.block_size = data->blksz;
-+	host->dma.req.nr_blocks = data->blocks;
-+
-+	cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
-+	if (data->flags & MMC_DATA_STREAM)
-+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+	else if (data->blocks > 1)
-+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+	else
-+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
-+
-+	if (data->flags & MMC_DATA_READ) {
-+		cmd_flags |= MCI_BIT(TRDIR);
-+		host->dma.req.nr_sg
-+			= dma_map_sg(&host->pdev->dev, data->sg,
-+				     data->sg_len, DMA_FROM_DEVICE);
-+		host->dma.req.periph_id = host->dma.rx_periph_id;
-+		host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
-+		host->dma.req.data_reg = host->mapbase + MCI_RDR;
-+	} else {
-+		host->dma.req.nr_sg
-+			= dma_map_sg(&host->pdev->dev, data->sg,
-+				     data->sg_len, DMA_TO_DEVICE);
-+		host->dma.req.periph_id = host->dma.tx_periph_id;
-+		host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
-+		host->dma.req.data_reg = host->mapbase + MCI_TDR;
-+	}
-+	host->dma.req.sg = data->sg;
-+
-+	dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
-+
-+	return cmd_flags;
-+}
-+
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	struct mmc_data *data = mrq->data;
-+	u32 iflags;
-+	u32 cmdflags = 0;
-+
-+	iflags = mci_readl(host, IMR);
-+	if (iflags)
-+		dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
-+				mci_readl(host, IMR));
-+
-+	WARN_ON(host->mrq != NULL);
-+
-+	/*
-+	 * We may "know" the card is gone even though there's still an
-+	 * electrical connection. If so, we really need to communicate
-+	 * this to the MMC core since there won't be any more
-+	 * interrupts as the card is completely removed. Otherwise,
-+	 * the MMC core might believe the card is still there even
-+	 * though the card was just removed very slowly.
-+	 */
-+	if (!host->present) {
-+		mrq->cmd->error = -ENOMEDIUM;
-+		mmc_request_done(mmc, mrq);
-+		return;
-+	}
-+
-+	host->mrq = mrq;
-+	host->pending_events = 0;
-+	host->completed_events = 0;
-+
-+	iflags = MCI_BIT(CMDRDY);
-+	cmdflags = atmci_prepare_command(mmc, mrq->cmd);
-+
-+	if (mrq->stop) {
-+		WARN_ON(!data);
-+
-+		host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
-+		host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
-+		if (!(data->flags & MMC_DATA_WRITE))
-+			host->stop_cmdr |= MCI_BIT(TRDIR);
-+		if (data->flags & MMC_DATA_STREAM)
-+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+		else
-+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+	}
-+	if (data) {
-+		cmdflags |= atmci_prepare_data(mmc, data);
-+		iflags |= MCI_DATA_ERROR_FLAGS;
-+	}
-+
-+	atmci_start_command(host, mrq->cmd, cmdflags);
-+	mci_writel(host, IER, iflags);
-+}
-+
-+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	u32 mr;
-+
-+	if (ios->clock) {
-+		u32 clkdiv;
-+
-+		/* Set clock rate */
-+		clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
-+		if (clkdiv > 255) {
-+			dev_warn(&mmc->class_dev,
-+				"clock %u too slow; using %lu\n",
-+				ios->clock, host->bus_hz / (2 * 256));
-+			clkdiv = 255;
-+		}
-+
-+		mr = mci_readl(host, MR);
-+		mr = MCI_BFINS(CLKDIV, clkdiv, mr)
-+			| MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
-+		mci_writel(host, MR, mr);
-+
-+		/* Enable the MCI controller */
-+		mci_writel(host, CR, MCI_BIT(MCIEN));
-+	} else {
-+		/* Disable the MCI controller */
-+		mci_writel(host, CR, MCI_BIT(MCIDIS));
-+	}
-+
-+	switch (ios->bus_width) {
-+	case MMC_BUS_WIDTH_1:
-+		mci_writel(host, SDCR, 0);
-+		break;
-+	case MMC_BUS_WIDTH_4:
-+		mci_writel(host, SDCR, MCI_BIT(SDCBUS));
-+		break;
-+	}
-+
-+	switch (ios->power_mode) {
-+	case MMC_POWER_ON:
-+		/* Send init sequence (74 clock cycles) */
-+		mci_writel(host, IDR, ~0UL);
-+		mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
-+		while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
-+			cpu_relax();
-+		break;
-+	default:
-+		/*
-+		 * TODO: None of the currently available AVR32-based
-+		 * boards allow MMC power to be turned off. Implement
-+		 * power control when this can be tested properly.
-+		 */
-+		break;
-+	}
-+}
-+
-+static int atmci_get_ro(struct mmc_host *mmc)
-+{
-+	int read_only = 0;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	if (host->wp_pin >= 0) {
-+		read_only = gpio_get_value(host->wp_pin);
-+		dev_dbg(&mmc->class_dev, "card is %s\n",
-+				read_only ? "read-only" : "read-write");
-+	} else {
-+		dev_dbg(&mmc->class_dev,
-+			"no pin for checking read-only switch."
-+			" Assuming write-enable.\n");
-+	}
-+
-+	return read_only;
-+}
-+
-+static struct mmc_host_ops atmci_ops = {
-+	.request	= atmci_request,
-+	.set_ios	= atmci_set_ios,
-+	.get_ro		= atmci_get_ro,
-+};
-+
-+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	WARN_ON(host->cmd || host->data);
-+	host->mrq = NULL;
-+
-+	mmc_request_done(mmc, mrq);
-+}
-+
-+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
-+			  u32 flags)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	atmci_start_command(host, data->stop, host->stop_cmdr | flags);
-+	mci_writel(host, IER, MCI_BIT(CMDRDY));
-+}
-+
-+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
-+{
-+	host->data = NULL;
-+	dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
-+		     ((data->flags & MMC_DATA_WRITE)
-+		      ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-+
-+	/*
-+	 * Data might complete before command for very short transfers
-+	 * (like READ_SCR)
-+	 */
-+	if (mci_cmd_is_complete(host)
-+	    && (!data->stop || mci_stop_is_complete(host)))
-+		atmci_request_end(host->mmc, data->mrq);
-+}
-+
-+static void atmci_command_complete(struct atmel_mci *host,
-+			struct mmc_command *cmd, u32 status)
-+{
-+	if (status & MCI_BIT(RTOE))
-+		cmd->error = -ETIMEDOUT;
-+	else if ((cmd->flags & MMC_RSP_CRC)
-+			&& (status & MCI_BIT(RCRCE)))
-+		cmd->error = -EILSEQ;
-+	else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
-+		cmd->error = -EIO;
-+
-+	if (cmd->error) {
-+		dev_dbg(&host->mmc->class_dev,
-+				"command error: op=0x%x status=0x%08x\n",
-+				cmd->opcode, status);
-+
-+		if (cmd->data) {
-+			dma_stop_request(host->dma.req.req.dmac,
-+					host->dma.req.req.channel);
-+			mci_writel(host, IDR, MCI_BIT(NOTBUSY)
-+					| MCI_DATA_ERROR_FLAGS);
-+			host->data = NULL;
-+		}
-+	}
-+}
-+
-+static void atmci_detect_change(unsigned long data)
-+{
-+	struct atmel_mci *host = (struct atmel_mci *)data;
-+	struct mmc_request *mrq = host->mrq;
-+	int present;
-+
-+	/*
-+	 * atmci_remove() sets detect_pin to -1 before freeing the
-+	 * interrupt. We must not re-enable the interrupt if it has
-+	 * been freed.
-+	 */
-+	smp_rmb();
-+	if (host->detect_pin < 0)
-+		return;
-+
-+	enable_irq(gpio_to_irq(host->detect_pin));
-+	present = !gpio_get_value(host->detect_pin);
-+
-+	dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
-+			present, host->present);
-+
-+	if (present != host->present) {
-+		dev_dbg(&host->mmc->class_dev, "card %s\n",
-+			present ? "inserted" : "removed");
-+		host->present = present;
-+
-+		/* Reset controller if card is gone */
-+		if (!present) {
-+			mci_writel(host, CR, MCI_BIT(SWRST));
-+			mci_writel(host, IDR, ~0UL);
-+			mci_writel(host, CR, MCI_BIT(MCIEN));
-+		}
-+
-+		/* Clean up queue if present */
-+		if (mrq) {
-+			if (!mci_cmd_is_complete(host))
-+				mrq->cmd->error = -ENOMEDIUM;
-+			if (mrq->data && !mci_data_is_complete(host)
-+			    && !mci_data_error_is_complete(host)) {
-+				dma_stop_request(host->dma.req.req.dmac,
-+						host->dma.req.req.channel);
-+				host->data->error = -ENOMEDIUM;
-+				atmci_data_complete(host, host->data);
-+			}
-+			if (mrq->stop && !mci_stop_is_complete(host))
-+				mrq->stop->error = -ENOMEDIUM;
-+
-+			host->cmd = NULL;
-+			atmci_request_end(host->mmc, mrq);
-+		}
-+
-+		mmc_detect_change(host->mmc, 0);
-+	}
-+}
-+
-+static void atmci_tasklet_func(unsigned long priv)
-+{
-+	struct mmc_host *mmc = (struct mmc_host *)priv;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	struct mmc_request *mrq = host->mrq;
-+	struct mmc_data *data = host->data;
-+
-+	dev_vdbg(&mmc->class_dev,
-+		"tasklet: pending/completed/mask %lx/%lx/%x\n",
-+		 host->pending_events, host->completed_events,
-+		 mci_readl(host, IMR));
-+
-+	if (mci_clear_cmd_is_pending(host)) {
-+		mci_set_cmd_complete(host);
-+		atmci_command_complete(host, mrq->cmd, host->cmd_status);
-+		if (!host->data || mci_data_is_complete(host)
-+		    || mci_data_error_is_complete(host))
-+			atmci_request_end(mmc, mrq);
-+	}
-+	if (mci_clear_stop_is_pending(host)) {
-+		mci_set_stop_complete(host);
-+		atmci_command_complete(host, mrq->stop, host->stop_status);
-+		if (mci_data_is_complete(host)
-+		    || mci_data_error_is_complete(host))
-+			atmci_request_end(mmc, mrq);
-+	}
-+	if (mci_clear_dma_error_is_pending(host)) {
-+		mci_set_dma_error_complete(host);
-+		mci_clear_data_pending(host);
-+
-+		/* DMA controller got bus error => invalid address */
-+		data->error = -EIO;
-+
-+		dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
-+				host->data->bytes_xfered);
-+
-+		if (data->stop
-+		    && !mci_set_stop_sent_is_completed(host))
-+			/* TODO: Check if card is still present */
-+			send_stop_cmd(host->mmc, data, 0);
-+
-+		atmci_data_complete(host, data);
-+	}
-+	if (mci_clear_data_error_is_pending(host)) {
-+		u32 status = host->data_status;
-+
-+		mci_set_data_error_complete(host);
-+		mci_clear_data_pending(host);
-+
-+		dma_stop_request(host->dma.req.req.dmac,
-+				 host->dma.req.req.channel);
-+
-+		if (status & MCI_BIT(DCRCE)) {
-+			dev_dbg(&mmc->class_dev, "data CRC error\n");
-+			data->error = -EILSEQ;
-+		} else if (status & MCI_BIT(DTOE)) {
-+			dev_dbg(&mmc->class_dev, "data timeout error\n");
-+			data->error = -ETIMEDOUT;
-+		} else {
-+			dev_dbg(&mmc->class_dev, "data FIFO error\n");
-+			data->error = -EIO;
-+		}
-+		dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
-+				data->bytes_xfered);
-+
-+		if (data->stop
-+		    && !mci_set_stop_sent_is_completed(host))
-+			/* TODO: Check if card is still present */
-+			send_stop_cmd(host->mmc, data, 0);
-+
-+		atmci_data_complete(host, data);
-+	}
-+	if (mci_clear_data_is_pending(host)) {
-+		mci_set_data_complete(host);
-+		data->bytes_xfered = data->blocks * data->blksz;
-+		atmci_data_complete(host, data);
-+	}
-+	/* See if there is a pending STOP which can be sent */
-+	if (host->pending_stop && mci_cmd_is_complete(host)) {
-+		host->pending_stop = 0;
-+		if (mrq->stop && !mci_set_stop_sent_is_completed(host))
-+			send_stop_cmd(host->mmc, mrq->data, 0);
-+	}
-+}
-+
-+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	struct mmc_command *cmd = host->cmd;
-+
-+	/*
-+	 * Read the response now so that we're free to send a new
-+	 * command immediately.
-+	 */
-+	cmd->resp[0] = mci_readl(host, RSPR);
-+	cmd->resp[1] = mci_readl(host, RSPR);
-+	cmd->resp[2] = mci_readl(host, RSPR);
-+	cmd->resp[3] = mci_readl(host, RSPR);
-+
-+	mci_writel(host, IDR, MCI_BIT(CMDRDY));
-+	host->cmd = NULL;
-+
-+	if (mci_stop_sent_is_complete(host)) {
-+		host->stop_status = status;
-+		mci_set_stop_pending(host);
-+	} else {
-+		struct mmc_request *mrq = host->mrq;
-+
-+		if (mrq->stop && mci_dma_is_complete(host)
-+				&& !mci_set_stop_sent_is_completed(host))
-+			send_stop_cmd(host->mmc, mrq->data, 0);
-+		host->cmd_status = status;
-+		mci_set_cmd_pending(host);
-+	}
-+
-+	tasklet_schedule(&host->tasklet);
-+}
-+
-+static void atmci_xfer_complete(struct dma_request *_req)
-+{
-+	struct dma_request_sg *req = to_dma_request_sg(_req);
-+	struct atmel_mci_dma *dma;
-+	struct atmel_mci *host;
-+	struct mmc_data *data;
-+
-+	dma = container_of(req, struct atmel_mci_dma, req);
-+	host = container_of(dma, struct atmel_mci, dma);
-+	data = host->data;
-+
-+	/*
-+	 * This callback may be called before we see the CMDRDY
-+	 * interrupt under heavy irq load (possibly caused by other
-+	 * drivers) or when interrupts are disabled for a long time.
-+	 */
-+	mci_set_dma_complete(host);
-+
-+	if (data->stop) {
-+		if (!mci_cmd_is_complete(host)) {
-+			/* Just remember a STOP must be sent */
-+			host->pending_stop = 1;
-+		} else if (!mci_set_stop_sent_is_completed(host)) {
-+			send_stop_cmd(host->mmc, data, 0);
-+			host->pending_stop = 0;
-+		}
-+	}
-+
-+	/*
-+	 * Regardless of what the documentation says, we have to wait
-+	 * for NOTBUSY even after block read operations.
-+	 *
-+	 * When the DMA transfer is complete, the controller may still
-+	 * be reading the CRC from the card, i.e. the data transfer is
-+	 * still in progress and we haven't seen all the potential
-+	 * error bits yet.
-+	 */
-+	mci_writel(host, IER, MCI_BIT(NOTBUSY));
-+}
-+
-+static void atmci_dma_error(struct dma_request *_req)
-+{
-+	struct dma_request_sg *req = to_dma_request_sg(_req);
-+	struct atmel_mci_dma *dma;
-+	struct atmel_mci *host;
-+
-+	dma = container_of(req, struct atmel_mci_dma, req);
-+	host = container_of(dma, struct atmel_mci, dma);
-+
-+	mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+			       | MCI_DATA_ERROR_FLAGS));
-+
-+	mci_set_dma_error_pending(host);
-+	tasklet_schedule(&host->tasklet);
-+}
-+
-+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
-+{
-+	struct mmc_host *mmc = dev_id;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	u32 status, mask, pending;
-+
-+	spin_lock(&mmc->lock);
-+
-+	status = mci_readl(host, SR);
-+	mask = mci_readl(host, IMR);
-+	pending = status & mask;
-+
-+	do {
-+		if (pending & MCI_DATA_ERROR_FLAGS) {
-+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+					       | MCI_DATA_ERROR_FLAGS));
-+			host->data_status = status;
-+			mci_set_data_error_pending(host);
-+			tasklet_schedule(&host->tasklet);
-+			break;
-+		}
-+		if (pending & MCI_BIT(CMDRDY))
-+			atmci_cmd_interrupt(mmc, status);
-+		if (pending & MCI_BIT(NOTBUSY)) {
-+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+					       | MCI_DATA_ERROR_FLAGS));
-+			mci_set_data_pending(host);
-+			tasklet_schedule(&host->tasklet);
-+		}
-+
-+		status = mci_readl(host, SR);
-+		mask = mci_readl(host, IMR);
-+		pending = status & mask;
-+	} while (pending);
-+
-+	spin_unlock(&mmc->lock);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
-+{
-+	struct mmc_host *mmc = dev_id;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	/*
-+	 * Disable interrupts until the pin has stabilized and check
-+	 * the state then. Use mod_timer() since we may be in the
-+	 * middle of the timer routine when this interrupt triggers.
-+	 */
-+	disable_irq_nosync(irq);
-+	mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __devinit atmci_probe(struct platform_device *pdev)
-+{
-+	struct mci_platform_data *board;
-+	struct atmel_mci *host;
-+	struct mmc_host *mmc;
-+	struct resource *regs;
-+	int irq;
-+	int ret;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return irq;
-+
-+	board = pdev->dev.platform_data;
-+
-+	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-+	if (!mmc)
-+		return -ENOMEM;
-+
-+	host = mmc_priv(mmc);
-+	host->pdev = pdev;
-+	host->mmc = mmc;
-+	if (board) {
-+		host->detect_pin = board->detect_pin;
-+		host->wp_pin = board->wp_pin;
-+	} else {
-+		host->detect_pin = -1;
-+		host->wp_pin = -1;
-+	}
-+
-+	host->mck = clk_get(&pdev->dev, "mci_clk");
-+	if (IS_ERR(host->mck)) {
-+		ret = PTR_ERR(host->mck);
-+		goto out_free_host;
-+	}
-+	clk_enable(host->mck);
-+
-+	ret = -ENOMEM;
-+	host->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!host->regs)
-+		goto out_disable_clk;
-+
-+	host->bus_hz = clk_get_rate(host->mck);
-+	host->mapbase = regs->start;
-+
-+	mmc->ops = &atmci_ops;
-+	mmc->f_min = (host->bus_hz + 511) / 512;
-+	mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
-+	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
-+	mmc->caps |= MMC_CAP_4_BIT_DATA;
-+
-+	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
-+
-+	ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
-+	if (ret)
-+		goto out_unmap;
-+
-+	/* Assume card is present if we don't have a detect pin */
-+	host->present = 1;
-+	if (host->detect_pin >= 0) {
-+		if (gpio_request(host->detect_pin, "mmc_detect")) {
-+			dev_dbg(&mmc->class_dev, "no detect pin available\n");
-+			host->detect_pin = -1;
-+		} else {
-+			host->present = !gpio_get_value(host->detect_pin);
-+		}
-+	}
-+	if (host->wp_pin >= 0) {
-+		if (gpio_request(host->wp_pin, "mmc_wp")) {
-+			dev_dbg(&mmc->class_dev, "no WP pin available\n");
-+			host->wp_pin = -1;
-+		}
-+	}
-+
-+	/* TODO: Get this information from platform data */
-+	ret = -ENOMEM;
-+	host->dma.req.req.dmac = find_dma_controller(0);
-+	if (!host->dma.req.req.dmac) {
-+		dev_dbg(&mmc->class_dev, "no DMA controller available\n");
-+		goto out_free_irq;
-+	}
-+	ret = dma_alloc_channel(host->dma.req.req.dmac);
-+	if (ret < 0) {
-+		dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
-+		goto out_free_irq;
-+	}
-+	host->dma.req.req.channel = ret;
-+	host->dma.req.width = DMA_WIDTH_32BIT;
-+	host->dma.req.req.xfer_complete = atmci_xfer_complete;
-+	host->dma.req.req.block_complete = NULL; // atmci_block_complete;
-+	host->dma.req.req.error = atmci_dma_error;
-+	host->dma.rx_periph_id = 0;
-+	host->dma.tx_periph_id = 1;
-+
-+	mci_writel(host, CR, MCI_BIT(SWRST));
-+	mci_writel(host, IDR, ~0UL);
-+
-+	platform_set_drvdata(pdev, host);
-+
-+	mmc_add_host(mmc);
-+
-+	if (host->detect_pin >= 0) {
-+		setup_timer(&host->detect_timer, atmci_detect_change,
-+				(unsigned long)host);
-+
-+		ret = request_irq(gpio_to_irq(host->detect_pin),
-+				  atmci_detect_interrupt,
-+				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+				  DRIVER_NAME, mmc);
-+		if (ret) {
-+			dev_dbg(&mmc->class_dev,
-+				"could not request IRQ %d for detect pin\n",
-+				gpio_to_irq(host->detect_pin));
-+			gpio_free(host->detect_pin);
-+			host->detect_pin = -1;
-+		}
-+	}
-+
-+	dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
-+			host->mapbase, irq);
-+
-+	atmci_init_debugfs(host);
-+
-+	return 0;
-+
-+out_free_irq:
-+	if (host->detect_pin >= 0)
-+		gpio_free(host->detect_pin);
-+	if (host->wp_pin >= 0)
-+		gpio_free(host->wp_pin);
-+	free_irq(irq, mmc);
-+out_unmap:
-+	iounmap(host->regs);
-+out_disable_clk:
-+	clk_disable(host->mck);
-+	clk_put(host->mck);
-+out_free_host:
-+	mmc_free_host(mmc);
-+	return ret;
-+}
-+
-+static int __devexit atmci_remove(struct platform_device *pdev)
-+{
-+	struct atmel_mci *host = platform_get_drvdata(pdev);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	if (host) {
-+		atmci_cleanup_debugfs(host);
-+
-+		if (host->detect_pin >= 0) {
-+			int pin = host->detect_pin;
-+
-+			/* Make sure our timer doesn't enable the interrupt */
-+			host->detect_pin = -1;
-+			smp_wmb();
-+
-+			free_irq(gpio_to_irq(pin), host->mmc);
-+			del_timer_sync(&host->detect_timer);
-+			cancel_delayed_work(&host->mmc->detect);
-+			gpio_free(pin);
-+		}
-+
-+		mmc_remove_host(host->mmc);
-+
-+		mci_writel(host, IDR, ~0UL);
-+		mci_writel(host, CR, MCI_BIT(MCIDIS));
-+		mci_readl(host, SR);
-+
-+		dma_release_channel(host->dma.req.req.dmac,
-+				    host->dma.req.req.channel);
-+
-+		if (host->wp_pin >= 0)
-+			gpio_free(host->wp_pin);
-+
-+		free_irq(platform_get_irq(pdev, 0), host->mmc);
-+		iounmap(host->regs);
-+
-+		clk_disable(host->mck);
-+		clk_put(host->mck);
-+
-+		mmc_free_host(host->mmc);
-+	}
-+	return 0;
-+}
-+
-+static struct platform_driver atmci_driver = {
-+	.probe		= atmci_probe,
-+	.remove		= __devexit_p(atmci_remove),
-+	.driver		= {
-+		.name		= DRIVER_NAME,
-+	},
-+};
-+
-+static int __init atmci_init(void)
-+{
-+	return platform_driver_register(&atmci_driver);
-+}
-+
-+static void __exit atmci_exit(void)
-+{
-+	platform_driver_unregister(&atmci_driver);
-+}
-+
-+module_init(atmci_init);
-+module_exit(atmci_exit);
-+
-+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.h
-@@ -0,0 +1,192 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-+#define __DRIVERS_MMC_ATMEL_MCI_H__
-+
-+/* MCI register offsets */
-+#define MCI_CR					0x0000
-+#define MCI_MR					0x0004
-+#define MCI_DTOR				0x0008
-+#define MCI_SDCR				0x000c
-+#define MCI_ARGR				0x0010
-+#define MCI_CMDR				0x0014
-+#define MCI_BLKR				0x0018
-+#define MCI_RSPR				0x0020
-+#define MCI_RSPR1				0x0024
-+#define MCI_RSPR2				0x0028
-+#define MCI_RSPR3				0x002c
-+#define MCI_RDR					0x0030
-+#define MCI_TDR					0x0034
-+#define MCI_SR					0x0040
-+#define MCI_IER					0x0044
-+#define MCI_IDR					0x0048
-+#define MCI_IMR					0x004c
-+
-+/* Bitfields in CR */
-+#define MCI_MCIEN_OFFSET			0
-+#define MCI_MCIEN_SIZE				1
-+#define MCI_MCIDIS_OFFSET			1
-+#define MCI_MCIDIS_SIZE				1
-+#define MCI_PWSEN_OFFSET			2
-+#define MCI_PWSEN_SIZE				1
-+#define MCI_PWSDIS_OFFSET			3
-+#define MCI_PWSDIS_SIZE				1
-+#define MCI_SWRST_OFFSET			7
-+#define MCI_SWRST_SIZE				1
-+
-+/* Bitfields in MR */
-+#define MCI_CLKDIV_OFFSET			0
-+#define MCI_CLKDIV_SIZE				8
-+#define MCI_PWSDIV_OFFSET			8
-+#define MCI_PWSDIV_SIZE				3
-+#define MCI_RDPROOF_OFFSET			11
-+#define MCI_RDPROOF_SIZE			1
-+#define MCI_WRPROOF_OFFSET			12
-+#define MCI_WRPROOF_SIZE			1
-+#define MCI_DMAPADV_OFFSET			14
-+#define MCI_DMAPADV_SIZE			1
-+#define MCI_BLKLEN_OFFSET			16
-+#define MCI_BLKLEN_SIZE				16
-+
-+/* Bitfields in DTOR */
-+#define MCI_DTOCYC_OFFSET			0
-+#define MCI_DTOCYC_SIZE				4
-+#define MCI_DTOMUL_OFFSET			4
-+#define MCI_DTOMUL_SIZE				3
-+
-+/* Bitfields in SDCR */
-+#define MCI_SDCSEL_OFFSET			0
-+#define MCI_SDCSEL_SIZE				4
-+#define MCI_SDCBUS_OFFSET			7
-+#define MCI_SDCBUS_SIZE				1
-+
-+/* Bitfields in ARGR */
-+#define MCI_ARG_OFFSET				0
-+#define MCI_ARG_SIZE				32
-+
-+/* Bitfields in CMDR */
-+#define MCI_CMDNB_OFFSET			0
-+#define MCI_CMDNB_SIZE				6
-+#define MCI_RSPTYP_OFFSET			6
-+#define MCI_RSPTYP_SIZE				2
-+#define MCI_SPCMD_OFFSET			8
-+#define MCI_SPCMD_SIZE				3
-+#define MCI_OPDCMD_OFFSET			11
-+#define MCI_OPDCMD_SIZE				1
-+#define MCI_MAXLAT_OFFSET			12
-+#define MCI_MAXLAT_SIZE				1
-+#define MCI_TRCMD_OFFSET			16
-+#define MCI_TRCMD_SIZE				2
-+#define MCI_TRDIR_OFFSET			18
-+#define MCI_TRDIR_SIZE				1
-+#define MCI_TRTYP_OFFSET			19
-+#define MCI_TRTYP_SIZE				2
-+
-+/* Bitfields in BLKR */
-+#define MCI_BCNT_OFFSET				0
-+#define MCI_BCNT_SIZE				16
-+
-+/* Bitfields in RSPRn */
-+#define MCI_RSP_OFFSET				0
-+#define MCI_RSP_SIZE				32
-+
-+/* Bitfields in SR/IER/IDR/IMR */
-+#define MCI_CMDRDY_OFFSET			0
-+#define MCI_CMDRDY_SIZE				1
-+#define MCI_RXRDY_OFFSET			1
-+#define MCI_RXRDY_SIZE				1
-+#define MCI_TXRDY_OFFSET			2
-+#define MCI_TXRDY_SIZE				1
-+#define MCI_BLKE_OFFSET				3
-+#define MCI_BLKE_SIZE				1
-+#define MCI_DTIP_OFFSET				4
-+#define MCI_DTIP_SIZE				1
-+#define MCI_NOTBUSY_OFFSET			5
-+#define MCI_NOTBUSY_SIZE			1
-+#define MCI_ENDRX_OFFSET			6
-+#define MCI_ENDRX_SIZE				1
-+#define MCI_ENDTX_OFFSET			7
-+#define MCI_ENDTX_SIZE				1
-+#define MCI_RXBUFF_OFFSET			14
-+#define MCI_RXBUFF_SIZE				1
-+#define MCI_TXBUFE_OFFSET			15
-+#define MCI_TXBUFE_SIZE				1
-+#define MCI_RINDE_OFFSET			16
-+#define MCI_RINDE_SIZE				1
-+#define MCI_RDIRE_OFFSET			17
-+#define MCI_RDIRE_SIZE				1
-+#define MCI_RCRCE_OFFSET			18
-+#define MCI_RCRCE_SIZE				1
-+#define MCI_RENDE_OFFSET			19
-+#define MCI_RENDE_SIZE				1
-+#define MCI_RTOE_OFFSET				20
-+#define MCI_RTOE_SIZE				1
-+#define MCI_DCRCE_OFFSET			21
-+#define MCI_DCRCE_SIZE				1
-+#define MCI_DTOE_OFFSET				22
-+#define MCI_DTOE_SIZE				1
-+#define MCI_OVRE_OFFSET				30
-+#define MCI_OVRE_SIZE				1
-+#define MCI_UNRE_OFFSET				31
-+#define MCI_UNRE_SIZE				1
-+
-+/* Constants for DTOMUL */
-+#define MCI_DTOMUL_1_CYCLE			0
-+#define MCI_DTOMUL_16_CYCLES			1
-+#define MCI_DTOMUL_128_CYCLES			2
-+#define MCI_DTOMUL_256_CYCLES			3
-+#define MCI_DTOMUL_1024_CYCLES			4
-+#define MCI_DTOMUL_4096_CYCLES			5
-+#define MCI_DTOMUL_65536_CYCLES			6
-+#define MCI_DTOMUL_1048576_CYCLES		7
-+
-+/* Constants for RSPTYP */
-+#define MCI_RSPTYP_NO_RESP			0
-+#define MCI_RSPTYP_48_BIT			1
-+#define MCI_RSPTYP_136_BIT			2
-+
-+/* Constants for SPCMD */
-+#define MCI_SPCMD_NO_SPEC_CMD			0
-+#define MCI_SPCMD_INIT_CMD			1
-+#define MCI_SPCMD_SYNC_CMD			2
-+#define MCI_SPCMD_INT_CMD			4
-+#define MCI_SPCMD_INT_RESP			5
-+
-+/* Constants for TRCMD */
-+#define MCI_TRCMD_NO_TRANS			0
-+#define MCI_TRCMD_START_TRANS			1
-+#define MCI_TRCMD_STOP_TRANS			2
-+
-+/* Constants for TRTYP */
-+#define MCI_TRTYP_BLOCK				0
-+#define MCI_TRTYP_MULTI_BLOCK			1
-+#define MCI_TRTYP_STREAM			2
-+
-+/* Bit manipulation macros */
-+#define MCI_BIT(name)					\
-+	(1 << MCI_##name##_OFFSET)
-+#define MCI_BF(name,value)				\
-+	(((value) & ((1 << MCI_##name##_SIZE) - 1))	\
-+	 << MCI_##name##_OFFSET)
-+#define MCI_BFEXT(name,value)				\
-+	(((value) >> MCI_##name##_OFFSET)		\
-+	 & ((1 << MCI_##name##_SIZE) - 1))
-+#define MCI_BFINS(name,value,old)			\
-+	(((old) & ~(((1 << MCI_##name##_SIZE) - 1)	\
-+		    << MCI_##name##_OFFSET))		\
-+	 | MCI_BF(name,value))
-+
-+/* Register access macros */
-+#define mci_readl(port,reg)				\
-+	__raw_readl((port)->regs + MCI_##reg)
-+#define mci_writel(port,reg,value)			\
-+	__raw_writel((value), (port)->regs + MCI_##reg)
-+
-+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -272,12 +272,54 @@ config MTD_NAND_CS553X
- 
- 	  If you say "m", the module will be called "cs553x_nand.ko".
- 
--config MTD_NAND_AT91
--	bool "Support for NAND Flash / SmartMedia on AT91"
--	depends on ARCH_AT91
-+config MTD_NAND_ATMEL
-+	bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
-+	depends on ARCH_AT91 || AVR32
- 	help
- 	  Enables support for NAND Flash / Smart Media Card interface
--	  on Atmel AT91 processors.
-+	  on Atmel AT91 and AVR32 processors.
-+choice
-+	prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
-+	depends on MTD_NAND_ATMEL
-+
-+config MTD_NAND_ATMEL_ECC_HW
-+	bool "Hardware ECC"
-+	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
-+	help
-+	  Use hardware ECC instead of software ECC when the chip
-+	  supports it.
-+
-+	  The hardware ECC controller is capable of single bit error
-+	  correction and 2-bit random detection per page.
-+
-+	  NB : hardware and software ECC schemes are incompatible.
-+	  If you switch from one to another, you'll have to erase your
-+	  mtd partition.
-+
-+	  If unsure, say Y
-+
-+config MTD_NAND_ATMEL_ECC_SOFT
-+	bool "Software ECC"
-+	help
-+	  Use software ECC.
-+
-+	  NB : hardware and software ECC schemes are incompatible.
-+	  If you switch from one to another, you'll have to erase your
-+	  mtd partition.
-+
-+config MTD_NAND_ATMEL_ECC_NONE
-+	bool "No ECC (testing only, DANGEROUS)"
-+	depends on DEBUG_KERNEL
-+	help
-+	  No ECC will be used.
-+	  It's not a good idea and it should be reserved for testing
-+	  purpose only.
-+
-+	  If unsure, say N
-+
-+	  endchoice
-+
-+endchoice
- 
- config MTD_NAND_CM_X270
- 	tristate "Support for NAND Flash on CM-X270 modules"
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -24,7 +24,7 @@ obj-$(CONFIG_MTD_NAND_TS7250)		+= ts7250
- obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
- obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
- obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
--obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nand.o
-+obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
- obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
- obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
---- a/drivers/mtd/nand/at91_nand.c
-+++ /dev/null
-@@ -1,236 +0,0 @@
--/*
-- * drivers/mtd/nand/at91_nand.c
-- *
-- *  Copyright (C) 2003 Rick Bronson
-- *
-- *  Derived from drivers/mtd/nand/autcpu12.c
-- *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
-- *
-- *  Derived from drivers/mtd/spia.c
-- *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- */
--
--#include <linux/slab.h>
--#include <linux/module.h>
--#include <linux/platform_device.h>
--#include <linux/mtd/mtd.h>
--#include <linux/mtd/nand.h>
--#include <linux/mtd/partitions.h>
--
--#include <asm/io.h>
--#include <asm/sizes.h>
--
--#include <asm/hardware.h>
--#include <asm/arch/board.h>
--#include <asm/arch/gpio.h>
--
--struct at91_nand_host {
--	struct nand_chip	nand_chip;
--	struct mtd_info		mtd;
--	void __iomem		*io_base;
--	struct at91_nand_data	*board;
--};
--
--/*
-- * Hardware specific access to control-lines
-- */
--static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
--{
--	struct nand_chip *nand_chip = mtd->priv;
--	struct at91_nand_host *host = nand_chip->priv;
--
--	if (cmd == NAND_CMD_NONE)
--		return;
--
--	if (ctrl & NAND_CLE)
--		writeb(cmd, host->io_base + (1 << host->board->cle));
--	else
--		writeb(cmd, host->io_base + (1 << host->board->ale));
--}
--
--/*
-- * Read the Device Ready pin.
-- */
--static int at91_nand_device_ready(struct mtd_info *mtd)
--{
--	struct nand_chip *nand_chip = mtd->priv;
--	struct at91_nand_host *host = nand_chip->priv;
--
--	return at91_get_gpio_value(host->board->rdy_pin);
--}
--
--/*
-- * Enable NAND.
-- */
--static void at91_nand_enable(struct at91_nand_host *host)
--{
--	if (host->board->enable_pin)
--		at91_set_gpio_value(host->board->enable_pin, 0);
--}
--
--/*
-- * Disable NAND.
-- */
--static void at91_nand_disable(struct at91_nand_host *host)
--{
--	if (host->board->enable_pin)
--		at91_set_gpio_value(host->board->enable_pin, 1);
--}
--
--#ifdef CONFIG_MTD_PARTITIONS
--const char *part_probes[] = { "cmdlinepart", NULL };
--#endif
--
--/*
-- * Probe for the NAND device.
-- */
--static int __init at91_nand_probe(struct platform_device *pdev)
--{
--	struct at91_nand_host *host;
--	struct mtd_info *mtd;
--	struct nand_chip *nand_chip;
--	int res;
--
--#ifdef CONFIG_MTD_PARTITIONS
--	struct mtd_partition *partitions = NULL;
--	int num_partitions = 0;
--#endif
--
--	/* Allocate memory for the device structure (and zero it) */
--	host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
--	if (!host) {
--		printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
--		return -ENOMEM;
--	}
--
--	host->io_base = ioremap(pdev->resource[0].start,
--				pdev->resource[0].end - pdev->resource[0].start + 1);
--	if (host->io_base == NULL) {
--		printk(KERN_ERR "at91_nand: ioremap failed\n");
--		kfree(host);
--		return -EIO;
--	}
--
--	mtd = &host->mtd;
--	nand_chip = &host->nand_chip;
--	host->board = pdev->dev.platform_data;
--
--	nand_chip->priv = host;		/* link the private data structures */
--	mtd->priv = nand_chip;
--	mtd->owner = THIS_MODULE;
--
--	/* Set address of NAND IO lines */
--	nand_chip->IO_ADDR_R = host->io_base;
--	nand_chip->IO_ADDR_W = host->io_base;
--	nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
--
--	if (host->board->rdy_pin)
--		nand_chip->dev_ready = at91_nand_device_ready;
--
--	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
--	nand_chip->chip_delay = 20;		/* 20us command delay time */
--
--	if (host->board->bus_width_16)		/* 16-bit bus width */
--		nand_chip->options |= NAND_BUSWIDTH_16;
--
--	platform_set_drvdata(pdev, host);
--	at91_nand_enable(host);
--
--	if (host->board->det_pin) {
--		if (at91_get_gpio_value(host->board->det_pin)) {
--			printk ("No SmartMedia card inserted.\n");
--			res = ENXIO;
--			goto out;
--		}
--	}
--
--	/* Scan to find existance of the device */
--	if (nand_scan(mtd, 1)) {
--		res = -ENXIO;
--		goto out;
--	}
--
--#ifdef CONFIG_MTD_PARTITIONS
--#ifdef CONFIG_MTD_CMDLINE_PARTS
--	mtd->name = "at91_nand";
--	num_partitions = parse_mtd_partitions(mtd, part_probes,
--					      &partitions, 0);
--#endif
--	if (num_partitions <= 0 && host->board->partition_info)
--		partitions = host->board->partition_info(mtd->size,
--							 &num_partitions);
--
--	if ((!partitions) || (num_partitions == 0)) {
--		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
--		res = ENXIO;
--		goto release;
--	}
--
--	res = add_mtd_partitions(mtd, partitions, num_partitions);
--#else
--	res = add_mtd_device(mtd);
--#endif
--
--	if (!res)
--		return res;
--
--release:
--	nand_release(mtd);
--out:
--	at91_nand_disable(host);
--	platform_set_drvdata(pdev, NULL);
--	iounmap(host->io_base);
--	kfree(host);
--	return res;
--}
--
--/*
-- * Remove a NAND device.
-- */
--static int __devexit at91_nand_remove(struct platform_device *pdev)
--{
--	struct at91_nand_host *host = platform_get_drvdata(pdev);
--	struct mtd_info *mtd = &host->mtd;
--
--	nand_release(mtd);
--
--	at91_nand_disable(host);
--
--	iounmap(host->io_base);
--	kfree(host);
--
--	return 0;
--}
--
--static struct platform_driver at91_nand_driver = {
--	.probe		= at91_nand_probe,
--	.remove		= at91_nand_remove,
--	.driver		= {
--		.name	= "at91_nand",
--		.owner	= THIS_MODULE,
--	},
--};
--
--static int __init at91_nand_init(void)
--{
--	return platform_driver_register(&at91_nand_driver);
--}
--
--
--static void __exit at91_nand_exit(void)
--{
--	platform_driver_unregister(&at91_nand_driver);
--}
--
--
--module_init(at91_nand_init);
--module_exit(at91_nand_exit);
--
--MODULE_LICENSE("GPL");
--MODULE_AUTHOR("Rick Bronson");
--MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
---- /dev/null
-+++ b/drivers/mtd/nand/atmel_nand.c
-@@ -0,0 +1,650 @@
-+/*
-+ *  Copyright (C) 2003 Rick Bronson
-+ *
-+ *  Derived from drivers/mtd/nand/autcpu12.c
-+ *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
-+ *
-+ *  Derived from drivers/mtd/spia.c
-+ *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
-+ *
-+ *
-+ *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
-+ *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
-+ *
-+ *     Derived from Das U-Boot source code
-+ *     		(u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
-+ *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <linux/gpio.h>
-+#include <linux/io.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
-+
-+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
-+#define hard_ecc	1
-+#else
-+#define hard_ecc	0
-+#endif
-+
-+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
-+#define no_ecc		1
-+#else
-+#define no_ecc		0
-+#endif
-+
-+/* Register access macros */
-+#define ecc_readl(add, reg)				\
-+	__raw_readl(add + ATMEL_ECC_##reg)
-+#define ecc_writel(add, reg, value)			\
-+	__raw_writel((value), add + ATMEL_ECC_##reg)
-+
-+#include "atmel_nand_ecc.h"	/* Hardware ECC registers */
-+
-+/* oob layout for large page size
-+ * bad block info is on bytes 0 and 1
-+ * the bytes have to be consecutives to avoid
-+ * several NAND_CMD_RNDOUT during read
-+ */
-+static struct nand_ecclayout atmel_oobinfo_large = {
-+	.eccbytes = 4,
-+	.eccpos = {60, 61, 62, 63},
-+	.oobfree = {
-+		{2, 58}
-+	},
-+};
-+
-+/* oob layout for small page size
-+ * bad block info is on bytes 4 and 5
-+ * the bytes have to be consecutives to avoid
-+ * several NAND_CMD_RNDOUT during read
-+ */
-+static struct nand_ecclayout atmel_oobinfo_small = {
-+	.eccbytes = 4,
-+	.eccpos = {0, 1, 2, 3},
-+	.oobfree = {
-+		{6, 10}
-+	},
-+};
-+
-+struct atmel_nand_host {
-+	struct nand_chip	nand_chip;
-+	struct mtd_info		mtd;
-+	void __iomem		*io_base;
-+	struct atmel_nand_data	*board;
-+	struct device		*dev;
-+	void __iomem		*ecc;
-+};
-+
-+/*
-+ * Enable NAND.
-+ */
-+static void atmel_nand_enable(struct atmel_nand_host *host)
-+{
-+	if (host->board->enable_pin)
-+		gpio_set_value(host->board->enable_pin, 0);
-+}
-+
-+/*
-+ * Disable NAND.
-+ */
-+static void atmel_nand_disable(struct atmel_nand_host *host)
-+{
-+	if (host->board->enable_pin)
-+		gpio_set_value(host->board->enable_pin, 1);
-+}
-+
-+/*
-+ * Hardware specific access to control-lines
-+ */
-+static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-+{
-+	struct nand_chip *nand_chip = mtd->priv;
-+	struct atmel_nand_host *host = nand_chip->priv;
-+
-+	if (ctrl & NAND_CTRL_CHANGE) {
-+		if (ctrl & NAND_NCE)
-+			atmel_nand_enable(host);
-+		else
-+			atmel_nand_disable(host);
-+	}
-+	if (cmd == NAND_CMD_NONE)
-+		return;
-+
-+	if (ctrl & NAND_CLE)
-+		writeb(cmd, host->io_base + (1 << host->board->cle));
-+	else
-+		writeb(cmd, host->io_base + (1 << host->board->ale));
-+}
-+
-+/*
-+ * Read the Device Ready pin.
-+ */
-+static int atmel_nand_device_ready(struct mtd_info *mtd)
-+{
-+	struct nand_chip *nand_chip = mtd->priv;
-+	struct atmel_nand_host *host = nand_chip->priv;
-+
-+	return gpio_get_value(host->board->rdy_pin);
-+}
-+
-+/*
-+ * Minimal-overhead PIO for data access.
-+ */
-+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+	struct nand_chip	*nand_chip = mtd->priv;
-+
-+	__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-+}
-+
-+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+	struct nand_chip	*nand_chip = mtd->priv;
-+
-+	__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-+}
-+
-+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+	struct nand_chip	*nand_chip = mtd->priv;
-+
-+	__raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-+}
-+
-+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+	struct nand_chip	*nand_chip = mtd->priv;
-+
-+	__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-+}
-+
-+/*
-+ * write oob for small pages
-+ */
-+static int atmel_nand_write_oob_512(struct mtd_info *mtd,
-+		struct nand_chip *chip, int page)
-+{
-+	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-+	int eccsize = chip->ecc.size, length = mtd->oobsize;
-+	int len, pos, status = 0;
-+	const uint8_t *bufpoi = chip->oob_poi;
-+
-+	pos = eccsize + chunk;
-+
-+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-+	len = min_t(int, length, chunk);
-+	chip->write_buf(mtd, bufpoi, len);
-+	bufpoi += len;
-+	length -= len;
-+	if (length > 0)
-+		chip->write_buf(mtd, bufpoi, length);
-+
-+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-+	status = chip->waitfunc(mtd, chip);
-+
-+	return status & NAND_STATUS_FAIL ? -EIO : 0;
-+
-+}
-+
-+/*
-+ * read oob for small pages
-+ */
-+static int atmel_nand_read_oob_512(struct mtd_info *mtd,
-+		struct nand_chip *chip,	int page, int sndcmd)
-+{
-+	if (sndcmd) {
-+		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+		sndcmd = 0;
-+	}
-+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+	return sndcmd;
-+}
-+
-+/*
-+ * Calculate HW ECC
-+ *
-+ * function called after a write
-+ *
-+ * mtd:        MTD block structure
-+ * dat:        raw data (unused)
-+ * ecc_code:   buffer for ECC
-+ */
-+static int atmel_nand_calculate(struct mtd_info *mtd,
-+		const u_char *dat, unsigned char *ecc_code)
-+{
-+	struct nand_chip *nand_chip = mtd->priv;
-+	struct atmel_nand_host *host = nand_chip->priv;
-+	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
-+	unsigned int ecc_value;
-+
-+	/* get the first 2 ECC bytes */
-+	ecc_value = ecc_readl(host->ecc, PR);
-+
-+	ecc_code[eccpos[0]] = ecc_value & 0xFF;
-+	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
-+
-+	/* get the last 2 ECC bytes */
-+	ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
-+
-+	ecc_code[eccpos[2]] = ecc_value & 0xFF;
-+	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
-+
-+	return 0;
-+}
-+
-+/*
-+ * HW ECC read page function
-+ *
-+ * mtd:        mtd info structure
-+ * chip:       nand chip info structure
-+ * buf:        buffer to store read data
-+ */
-+static int atmel_nand_read_page(struct mtd_info *mtd,
-+		struct nand_chip *chip, uint8_t *buf)
-+{
-+	int eccsize = chip->ecc.size;
-+	int eccbytes = chip->ecc.bytes;
-+	uint32_t *eccpos = chip->ecc.layout->eccpos;
-+	uint8_t *p = buf;
-+	uint8_t *oob = chip->oob_poi;
-+	uint8_t *ecc_pos;
-+	int stat;
-+
-+	/*
-+	 * Errata: ALE is incorrectly wired up to the ECC controller
-+	 * on the AP7000, so it will include the address cycles in the
-+	 * ECC calculation.
-+	 *
-+	 * Workaround: Reset the parity registers before reading the
-+	 * actual data.
-+	 */
-+	if (cpu_is_at32ap7000()) {
-+		struct atmel_nand_host *host = chip->priv;
-+		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
-+	}
-+
-+	/* read the page */
-+	chip->read_buf(mtd, p, eccsize);
-+
-+	/* move to ECC position if needed */
-+	if (eccpos[0] != 0) {
-+		/* This only works on large pages
-+		 * because the ECC controller waits for
-+		 * NAND_CMD_RNDOUTSTART after the
-+		 * NAND_CMD_RNDOUT.
-+		 * anyway, for small pages, the eccpos[0] == 0
-+		 */
-+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-+				mtd->writesize + eccpos[0], -1);
-+	}
-+
-+	/* the ECC controller needs to read the ECC just after the data */
-+	ecc_pos = oob + eccpos[0];
-+	chip->read_buf(mtd, ecc_pos, eccbytes);
-+
-+	/* check if there's an error */
-+	stat = chip->ecc.correct(mtd, p, oob, NULL);
-+
-+	if (stat < 0)
-+		mtd->ecc_stats.failed++;
-+	else
-+		mtd->ecc_stats.corrected += stat;
-+
-+	/* get back to oob start (end of page) */
-+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
-+
-+	/* read the oob */
-+	chip->read_buf(mtd, oob, mtd->oobsize);
-+
-+	return 0;
-+}
-+
-+/*
-+ * HW ECC Correction
-+ *
-+ * function called after a read
-+ *
-+ * mtd:        MTD block structure
-+ * dat:        raw data read from the chip
-+ * read_ecc:   ECC from the chip (unused)
-+ * isnull:     unused
-+ *
-+ * Detect and correct a 1 bit error for a page
-+ */
-+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
-+		u_char *read_ecc, u_char *isnull)
-+{
-+	struct nand_chip *nand_chip = mtd->priv;
-+	struct atmel_nand_host *host = nand_chip->priv;
-+	unsigned int ecc_status;
-+	unsigned int ecc_word, ecc_bit;
-+
-+	/* get the status from the Status Register */
-+	ecc_status = ecc_readl(host->ecc, SR);
-+
-+	/* if there's no error */
-+	if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
-+		return 0;
-+
-+	/* get error bit offset (4 bits) */
-+	ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
-+	/* get word address (12 bits) */
-+	ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
-+	ecc_word >>= 4;
-+
-+	/* if there are multiple errors */
-+	if (ecc_status & ATMEL_ECC_MULERR) {
-+		/* check if it is a freshly erased block
-+		 * (filled with 0xff) */
-+		if ((ecc_bit == ATMEL_ECC_BITADDR)
-+				&& (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
-+			/* the block has just been erased, return OK */
-+			return 0;
-+		}
-+		/* it doesn't seems to be a freshly
-+		 * erased block.
-+		 * We can't correct so many errors */
-+		dev_dbg(host->dev, "atmel_nand : multiple errors detected."
-+				" Unable to correct.\n");
-+		return -EIO;
-+	}
-+
-+	/* if there's a single bit error : we can correct it */
-+	if (ecc_status & ATMEL_ECC_ECCERR) {
-+		/* there's nothing much to do here.
-+		 * the bit error is on the ECC itself.
-+		 */
-+		dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
-+				" Nothing to correct\n");
-+		return 0;
-+	}
-+
-+	dev_dbg(host->dev, "atmel_nand : one bit error on data."
-+			" (word offset in the page :"
-+			" 0x%x bit offset : 0x%x)\n",
-+			ecc_word, ecc_bit);
-+	/* correct the error */
-+	if (nand_chip->options & NAND_BUSWIDTH_16) {
-+		/* 16 bits words */
-+		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
-+	} else {
-+		/* 8 bits words */
-+		dat[ecc_word] ^= (1 << ecc_bit);
-+	}
-+	dev_dbg(host->dev, "atmel_nand : error corrected\n");
-+	return 1;
-+}
-+
-+/*
-+ * Enable HW ECC : unused on most chips
-+ */
-+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
-+{
-+	if (cpu_is_at32ap7000()) {
-+		struct nand_chip *nand_chip = mtd->priv;
-+		struct atmel_nand_host *host = nand_chip->priv;
-+		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
-+	}
-+}
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *part_probes[] = { "cmdlinepart", NULL };
-+#endif
-+
-+/*
-+ * Probe for the NAND device.
-+ */
-+static int __init atmel_nand_probe(struct platform_device *pdev)
-+{
-+	struct atmel_nand_host *host;
-+	struct mtd_info *mtd;
-+	struct nand_chip *nand_chip;
-+	struct resource *regs;
-+	struct resource *mem;
-+	int res;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+	struct mtd_partition *partitions = NULL;
-+	int num_partitions = 0;
-+#endif
-+
-+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!mem) {
-+		printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
-+		return -ENXIO;
-+	}
-+
-+	/* Allocate memory for the device structure (and zero it) */
-+	host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
-+	if (!host) {
-+		printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
-+		return -ENOMEM;
-+	}
-+
-+	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
-+	if (host->io_base == NULL) {
-+		printk(KERN_ERR "atmel_nand: ioremap failed\n");
-+		res = -EIO;
-+		goto err_nand_ioremap;
-+	}
-+
-+	mtd = &host->mtd;
-+	nand_chip = &host->nand_chip;
-+	host->board = pdev->dev.platform_data;
-+	host->dev = &pdev->dev;
-+
-+	nand_chip->priv = host;		/* link the private data structures */
-+	mtd->priv = nand_chip;
-+	mtd->owner = THIS_MODULE;
-+
-+	/* Set address of NAND IO lines */
-+	nand_chip->IO_ADDR_R = host->io_base;
-+	nand_chip->IO_ADDR_W = host->io_base;
-+	nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
-+
-+	if (host->board->rdy_pin)
-+		nand_chip->dev_ready = atmel_nand_device_ready;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	if (!regs && hard_ecc) {
-+		printk(KERN_ERR "atmel_nand: can't get I/O resource "
-+				"regs\nFalling back on software ECC\n");
-+	}
-+
-+	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
-+	if (no_ecc)
-+		nand_chip->ecc.mode = NAND_ECC_NONE;
-+	if (hard_ecc && regs) {
-+		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
-+		if (host->ecc == NULL) {
-+			printk(KERN_ERR "atmel_nand: ioremap failed\n");
-+			res = -EIO;
-+			goto err_ecc_ioremap;
-+		}
-+		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-+		nand_chip->ecc.calculate = atmel_nand_calculate;
-+		nand_chip->ecc.correct = atmel_nand_correct;
-+		nand_chip->ecc.hwctl = atmel_nand_hwctl;
-+		nand_chip->ecc.read_page = atmel_nand_read_page;
-+		nand_chip->ecc.bytes = 4;
-+		nand_chip->ecc.prepad = 0;
-+		nand_chip->ecc.postpad = 0;
-+	}
-+
-+	nand_chip->chip_delay = 20;		/* 20us command delay time */
-+
-+	if (host->board->bus_width_16) {	/* 16-bit bus width */
-+		nand_chip->options |= NAND_BUSWIDTH_16;
-+		nand_chip->read_buf = atmel_read_buf16;
-+		nand_chip->write_buf = atmel_write_buf16;
-+	} else {
-+		nand_chip->read_buf = atmel_read_buf;
-+		nand_chip->write_buf = atmel_write_buf;
-+	}
-+
-+	platform_set_drvdata(pdev, host);
-+	atmel_nand_enable(host);
-+
-+	if (host->board->det_pin) {
-+		if (gpio_get_value(host->board->det_pin)) {
-+			printk("No SmartMedia card inserted.\n");
-+			res = ENXIO;
-+			goto err_no_card;
-+		}
-+	}
-+
-+	/* first scan to find the device and get the page size */
-+	if (nand_scan_ident(mtd, 1)) {
-+		res = -ENXIO;
-+		goto err_scan_ident;
-+	}
-+
-+	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
-+		/* ECC is calculated for the whole page (1 step) */
-+		nand_chip->ecc.size = mtd->writesize;
-+
-+		/* set ECC page size and oob layout */
-+		switch (mtd->writesize) {
-+		case 512:
-+			nand_chip->ecc.layout = &atmel_oobinfo_small;
-+			nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
-+			nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
-+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
-+			break;
-+		case 1024:
-+			nand_chip->ecc.layout = &atmel_oobinfo_large;
-+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
-+			break;
-+		case 2048:
-+			nand_chip->ecc.layout = &atmel_oobinfo_large;
-+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
-+			break;
-+		case 4096:
-+			nand_chip->ecc.layout = &atmel_oobinfo_large;
-+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
-+			break;
-+		default:
-+			/* page size not handled by HW ECC */
-+			/* switching back to soft ECC */
-+			nand_chip->ecc.mode = NAND_ECC_SOFT;
-+			nand_chip->ecc.calculate = NULL;
-+			nand_chip->ecc.correct = NULL;
-+			nand_chip->ecc.hwctl = NULL;
-+			nand_chip->ecc.read_page = NULL;
-+			nand_chip->ecc.postpad = 0;
-+			nand_chip->ecc.prepad = 0;
-+			nand_chip->ecc.bytes = 0;
-+			break;
-+		}
-+	}
-+
-+	/* second phase scan */
-+	if (nand_scan_tail(mtd)) {
-+		res = -ENXIO;
-+		goto err_scan_tail;
-+	}
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+	mtd->name = "atmel_nand";
-+	num_partitions = parse_mtd_partitions(mtd, part_probes,
-+					      &partitions, 0);
-+#endif
-+	if (num_partitions <= 0 && host->board->partition_info)
-+		partitions = host->board->partition_info(mtd->size,
-+							 &num_partitions);
-+
-+	if ((!partitions) || (num_partitions == 0)) {
-+		printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
-+		res = ENXIO;
-+		goto err_no_partitions;
-+	}
-+
-+	res = add_mtd_partitions(mtd, partitions, num_partitions);
-+#else
-+	res = add_mtd_device(mtd);
-+#endif
-+
-+	if (!res)
-+		return res;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+err_no_partitions:
-+#endif
-+	nand_release(mtd);
-+err_scan_tail:
-+err_scan_ident:
-+err_no_card:
-+	atmel_nand_disable(host);
-+	platform_set_drvdata(pdev, NULL);
-+	if (host->ecc)
-+		iounmap(host->ecc);
-+err_ecc_ioremap:
-+	iounmap(host->io_base);
-+err_nand_ioremap:
-+	kfree(host);
-+	return res;
-+}
-+
-+/*
-+ * Remove a NAND device.
-+ */
-+static int __exit atmel_nand_remove(struct platform_device *pdev)
-+{
-+	struct atmel_nand_host *host = platform_get_drvdata(pdev);
-+	struct mtd_info *mtd = &host->mtd;
-+
-+	nand_release(mtd);
-+
-+	atmel_nand_disable(host);
-+
-+	if (host->ecc)
-+		iounmap(host->ecc);
-+	iounmap(host->io_base);
-+	kfree(host);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver atmel_nand_driver = {
-+	.remove		= __exit_p(atmel_nand_remove),
-+	.driver		= {
-+		.name	= "atmel_nand",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init atmel_nand_init(void)
-+{
-+	return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
-+}
-+
-+
-+static void __exit atmel_nand_exit(void)
-+{
-+	platform_driver_unregister(&atmel_nand_driver);
-+}
-+
-+
-+module_init(atmel_nand_init);
-+module_exit(atmel_nand_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Rick Bronson");
-+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
-+MODULE_ALIAS("platform:atmel_nand");
---- /dev/null
-+++ b/drivers/mtd/nand/atmel_nand_ecc.h
-@@ -0,0 +1,36 @@
-+/*
-+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
-+ * Based on AT91SAM9260 datasheet revision B.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef ATMEL_NAND_ECC_H
-+#define ATMEL_NAND_ECC_H
-+
-+#define ATMEL_ECC_CR		0x00			/* Control register */
-+#define		ATMEL_ECC_RST		(1 << 0)		/* Reset parity */
-+
-+#define ATMEL_ECC_MR		0x04			/* Mode register */
-+#define		ATMEL_ECC_PAGESIZE	(3 << 0)		/* Page Size */
-+#define			ATMEL_ECC_PAGESIZE_528		(0)
-+#define			ATMEL_ECC_PAGESIZE_1056		(1)
-+#define			ATMEL_ECC_PAGESIZE_2112		(2)
-+#define			ATMEL_ECC_PAGESIZE_4224		(3)
-+
-+#define ATMEL_ECC_SR		0x08			/* Status register */
-+#define		ATMEL_ECC_RECERR		(1 << 0)		/* Recoverable Error */
-+#define		ATMEL_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
-+#define		ATMEL_ECC_MULERR		(1 << 2)		/* Multiple Errors */
-+
-+#define ATMEL_ECC_PR		0x0c			/* Parity register */
-+#define		ATMEL_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
-+#define		ATMEL_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
-+
-+#define ATMEL_ECC_NPR		0x10			/* NParity register */
-+#define		ATMEL_ECC_NPARITY	(0xffff << 0)		/* NParity */
-+
-+#endif
---- a/drivers/mtd/nand/bf5xx_nand.c
-+++ b/drivers/mtd/nand/bf5xx_nand.c
-@@ -803,3 +803,4 @@ module_exit(bf5xx_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR(DRV_AUTHOR);
- MODULE_DESCRIPTION(DRV_DESC);
-+MODULE_ALIAS("platform:" DRV_NAME);
---- a/drivers/mtd/nand/ndfc.c
-+++ b/drivers/mtd/nand/ndfc.c
-@@ -317,3 +317,5 @@ module_exit(ndfc_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
- MODULE_DESCRIPTION("Platform driver for NDFC");
-+MODULE_ALIAS("platform:ndfc-chip");
-+MODULE_ALIAS("platform:ndfc-nand");
---- a/drivers/mtd/nand/orion_nand.c
-+++ b/drivers/mtd/nand/orion_nand.c
-@@ -169,3 +169,4 @@ module_exit(orion_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Tzachi Perelstein");
- MODULE_DESCRIPTION("NAND glue for Orion platforms");
-+MODULE_ALIAS("platform:orion_nand");
---- a/drivers/mtd/nand/plat_nand.c
-+++ b/drivers/mtd/nand/plat_nand.c
-@@ -161,3 +161,4 @@ module_exit(plat_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Vitaly Wool");
- MODULE_DESCRIPTION("Simple generic NAND driver");
-+MODULE_ALIAS("platform:gen_nand");
---- a/drivers/mtd/nand/s3c2410.c
-+++ b/drivers/mtd/nand/s3c2410.c
-@@ -927,3 +927,6 @@ module_exit(s3c2410_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
- MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
-+MODULE_ALIAS("platform:s3c2410-nand");
-+MODULE_ALIAS("platform:s3c2412-nand");
-+MODULE_ALIAS("platform:s3c2440-nand");
---- a/drivers/net/macb.c
-+++ b/drivers/net/macb.c
-@@ -1277,8 +1277,45 @@ static int __exit macb_remove(struct pla
- 	return 0;
- }
- 
-+#ifdef CONFIG_PM
-+static int macb_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct net_device *netdev = platform_get_drvdata(pdev);
-+	struct macb *bp = netdev_priv(netdev);
-+
-+	netif_device_detach(netdev);
-+
-+#ifndef CONFIG_ARCH_AT91
-+	clk_disable(bp->hclk);
-+#endif
-+	clk_disable(bp->pclk);
-+
-+	return 0;
-+}
-+
-+static int macb_resume(struct platform_device *pdev)
-+{
-+	struct net_device *netdev = platform_get_drvdata(pdev);
-+	struct macb *bp = netdev_priv(netdev);
-+
-+	clk_enable(bp->pclk);
-+#ifndef CONFIG_ARCH_AT91
-+	clk_enable(bp->hclk);
-+#endif
-+
-+	netif_device_attach(netdev);
-+
-+	return 0;
-+}
-+#else
-+#define macb_suspend	NULL
-+#define macb_resume	NULL
-+#endif
-+
- static struct platform_driver macb_driver = {
- 	.remove		= __exit_p(macb_remove),
-+	.suspend	= macb_suspend,
-+	.resume		= macb_resume,
- 	.driver		= {
- 		.name		= "macb",
- 	},
---- a/drivers/parport/Kconfig
-+++ b/drivers/parport/Kconfig
-@@ -36,7 +36,7 @@ if PARPORT
- config PARPORT_PC
- 	tristate "PC-style hardware"
- 	depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
--		(!M68K || ISA) && !MN10300
-+		(!M68K || ISA) && !MN10300 && !AVR32
- 	---help---
- 	  You should say Y here if you have a PC-style parallel port. All
- 	  IBM PC compatible computers and some Alphas have PC-style
---- a/drivers/pcmcia/Kconfig
-+++ b/drivers/pcmcia/Kconfig
-@@ -277,6 +277,13 @@ config ELECTRA_CF
- 	  Say Y here to support the CompactFlash controller on the
- 	  PA Semi Electra eval board.
- 
-+config AT32_CF
-+	tristate "AT32AP CompactFlash Controller"
-+	depends on PCMCIA && AVR32 && PLATFORM_AT32AP
-+	help
-+	  Say Y here to support the CompactFlash controller on AT32 chips.
-+	  Or choose M to compile the driver as a module named "at32_cf".
-+
- config PCCARD_NONSTATIC
- 	tristate
- 
---- a/drivers/pcmcia/Makefile
-+++ b/drivers/pcmcia/Makefile
-@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc417
- obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
- obj-$(CONFIG_AT91_CF)				+= at91_cf.o
- obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
-+obj-$(CONFIG_AT32_CF)				+= at32_cf.o
- 
- sa11xx_core-y					+= soc_common.o sa11xx_base.o
- pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
---- /dev/null
-+++ b/drivers/pcmcia/at32_cf.c
-@@ -0,0 +1,533 @@
-+/*
-+ * Driver for AVR32 Static Memory Controller: CompactFlash support
-+ *
-+ * Copyright (C) 2006 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <pcmcia/ss.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+
-+#include <asm/arch/smc.h>
-+
-+struct at32_cf_socket {
-+	struct pcmcia_socket	socket;
-+	int			detect_pin;
-+	int			reset_pin;
-+	int			vcc_pin;
-+	int			ready_pin;
-+	struct resource		res_attr;
-+	struct resource		res_mem;
-+	struct resource		res_io;
-+	struct smc_config	smc;
-+	unsigned int		irq;
-+	unsigned int		cf_cs;
-+	socket_state_t		state;
-+	unsigned		present:1;
-+};
-+#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
-+
-+/*
-+ * We have the following memory layout relative to the base address:
-+ *
-+ *   Alt IDE Mode:      00e0 0000 -> 00ff ffff
-+ *   True IDE Mode:     00c0 0000 -> 00df ffff
-+ *   I/O memory:        0080 0000 -> 00bf ffff
-+ *   Common memory:     0040 0000 -> 007f ffff
-+ *   Attribute memory:  0000 0000 -> 003f ffff
-+ */
-+#define CF_ATTR_OFFSET	0x00000000
-+#define CF_MEM_OFFSET	0x00400000
-+#define CF_IO_OFFSET	0x00800000
-+#define CF_RES_SIZE	4096
-+
-+#ifdef DEBUG
-+
-+static int pc_debug;
-+module_param(pc_debug, int, 0644);
-+
-+static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
-+			  int level, const char *fmt, ...)
-+{
-+	va_list args;
-+
-+	if (pc_debug > level) {
-+		printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
-+		va_start(args, fmt);
-+		vprintk(fmt, args);
-+		va_end(args);
-+	}
-+}
-+
-+#define debug(cf, lvl, fmt, arg...)			\
-+	at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
-+
-+#else
-+#define debug(cf, lvl, fmt, arg...) do { } while (0)
-+#endif
-+
-+static inline int at32_cf_present(struct at32_cf_socket *cf)
-+{
-+	int present = 1;
-+
-+	/* If we don't have a detect pin, assume the card is present */
-+	if (cf->detect_pin >= 0)
-+		present = !gpio_get_value(cf->detect_pin);
-+
-+	return present;
-+}
-+
-+static irqreturn_t at32_cf_irq(int irq, void *dev_id)
-+{
-+	struct at32_cf_socket *cf = dev_id;
-+	unsigned int present;
-+
-+	present = at32_cf_present(cf);
-+	if (present != cf->present) {
-+		cf->present = present;
-+		debug(cf, 3, "card %s\n", present ? "present" : "gone");
-+		pcmcia_parse_events(&cf->socket, SS_DETECT);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
-+{
-+	struct at32_cf_socket *cf;
-+	u_int status = 0;
-+
-+	cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+	if (at32_cf_present(cf)) {
-+		/* NOTE: gpio on AP7xxx is 3.3V */
-+		status = SS_DETECT | SS_3VCARD;
-+		if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
-+			status |= SS_READY;
-+		if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
-+			status |= SS_POWERON;
-+	}
-+
-+	*value = status;
-+	return 0;
-+}
-+
-+static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
-+{
-+	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+	debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
-+			(state->csc_mask==0)?"<NONE> ":"",
-+			(state->csc_mask&SS_DETECT)?"DETECT ":"",
-+			(state->csc_mask&SS_READY)?"READY ":"",
-+			(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
-+			(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
-+			(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
-+			(state->flags==0)?"<NONE> ":"",
-+			(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
-+			(state->flags&SS_IOCARD)?"IOCARD ":"",
-+			(state->flags&SS_RESET)?"RESET ":"",
-+			(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
-+			(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
-+			state->Vcc, state->Vpp, state->io_irq);
-+
-+	/*
-+	 * TODO: Allow boards to override this in case they have level
-+	 * converters.
-+	 */
-+	switch (state->Vcc) {
-+	case 0:
-+		if (cf->vcc_pin >= 0)
-+			gpio_set_value(cf->vcc_pin, 0);
-+		break;
-+	case 33:
-+		if (cf->vcc_pin >= 0)
-+			gpio_set_value(cf->vcc_pin, 1);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	if (cf->reset_pin >= 0)
-+		gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
-+
-+	cf->state = *state;
-+
-+	return 0;
-+}
-+
-+static int at32_cf_socket_init(struct pcmcia_socket *sock)
-+{
-+	debug(to_at32_cf(sock), 2, "called\n");
-+
-+	return 0;
-+}
-+
-+static int at32_cf_suspend(struct pcmcia_socket *sock)
-+{
-+	debug(to_at32_cf(sock), 2, "called\n");
-+
-+	at32_cf_set_socket(sock, &dead_socket);
-+
-+	return 0;
-+}
-+
-+static int at32_cf_set_io_map(struct pcmcia_socket *sock,
-+			      struct pccard_io_map *map)
-+{
-+	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+	int retval;
-+
-+	debug(cf, 2, "map %u  speed %u start 0x%08x stop 0x%08x\n",
-+		map->map, map->speed, map->start, map->stop);
-+	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+		(map->flags == 0) ? "<NONE>":"",
-+		(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
-+		(map->flags & MAP_16BIT) ? "16BIT " : "",
-+		(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
-+		(map->flags & MAP_0WS) ? "0WS " : "",
-+		(map->flags & MAP_WRPROT) ? "WRPROT " : "",
-+		(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
-+		(map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
-+
-+	map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
-+
-+	if (map->flags & MAP_16BIT)
-+		cf->smc.bus_width = 2;
-+	else
-+		cf->smc.bus_width = 1;
-+
-+	if (map->flags & MAP_USE_WAIT)
-+		cf->smc.nwait_mode = 3;
-+	else
-+		cf->smc.nwait_mode = 0;
-+
-+	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
-+	if (retval) {
-+		printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
-+		return retval;
-+	}
-+
-+	map->start = cf->socket.io_offset;
-+	map->stop = map->start + CF_RES_SIZE - 1;
-+
-+	return 0;
-+}
-+
-+static int
-+at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
-+{
-+	struct at32_cf_socket *cf;
-+	struct resource *res;
-+	int retval;
-+
-+	cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+	debug(cf, 2, "map %u speed %u card_start %08x\n",
-+		map->map, map->speed, map->card_start);
-+	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+		(map->flags==0)?"<NONE>":"",
-+		(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
-+		(map->flags&MAP_16BIT)?"16BIT ":"",
-+		(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
-+		(map->flags&MAP_0WS)?"0WS ":"",
-+		(map->flags&MAP_WRPROT)?"WRPROT ":"",
-+		(map->flags&MAP_ATTRIB)?"ATTRIB ":"",
-+		(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
-+
-+	if (map->card_start)
-+		return -EINVAL;
-+
-+	map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
-+
-+	if (map->flags & MAP_ATTRIB) {
-+		res = &cf->res_attr;
-+
-+		/* Linksys WCF12 seems to use WAIT when reading CIS */
-+		map->flags |= MAP_USE_WAIT;
-+	} else {
-+		res = &cf->res_mem;
-+	}
-+
-+	if (map->flags & MAP_USE_WAIT)
-+		cf->smc.nwait_mode = 3;
-+	else
-+		cf->smc.nwait_mode = 0;
-+
-+	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
-+	if (retval) {
-+		printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
-+		return retval;
-+	}
-+
-+	map->static_start = res->start;
-+
-+	return 0;
-+}
-+
-+static struct pccard_operations at32_cf_ops = {
-+	.init			= at32_cf_socket_init,
-+	.suspend		= at32_cf_suspend,
-+	.get_status		= at32_cf_get_status,
-+	.set_socket		= at32_cf_set_socket,
-+	.set_io_map		= at32_cf_set_io_map,
-+	.set_mem_map		= at32_cf_set_mem_map,
-+};
-+
-+static int __init request_pin(struct platform_device *pdev,
-+			      unsigned int pin, const char *name)
-+{
-+	if (gpio_request(pin, name)) {
-+		dev_warn(&pdev->dev, "failed to request %s pin\n", name);
-+		return -1;
-+	}
-+
-+	return pin;
-+}
-+
-+static struct smc_timing at32_cf_timing __initdata = {
-+	.ncs_read_setup		= 30,
-+	.nrd_setup		= 100,
-+	.ncs_write_setup	= 30,
-+	.nwe_setup		= 100,
-+
-+	.ncs_read_pulse		= 360,
-+	.nrd_pulse		= 290,
-+	.ncs_write_pulse	= 360,
-+	.nwe_pulse		= 290,
-+
-+	.read_cycle		= 420,
-+	.write_cycle		= 420,
-+};
-+
-+static int __init at32_cf_probe(struct platform_device *pdev)
-+{
-+	struct at32_cf_socket	*cf;
-+	struct cf_platform_data	*board = pdev->dev.platform_data;
-+	struct resource		*res_skt;
-+	int			irq;
-+	int			ret;
-+
-+	dev_dbg(&pdev->dev, "probe");
-+
-+	if (!board)
-+		return -ENXIO;
-+
-+	res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res_skt)
-+		return -ENXIO;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return irq;
-+
-+	cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
-+	if (!cf)
-+		return -ENOMEM;
-+
-+	cf->detect_pin = -1;
-+	cf->reset_pin = -1;
-+	cf->vcc_pin = -1;
-+	cf->ready_pin = -1;
-+	cf->cf_cs = board->cs;
-+
-+	if (board->detect_pin != GPIO_PIN_NONE)
-+		cf->detect_pin = request_pin(pdev, board->detect_pin,
-+					     "cf_detect");
-+	if (board->reset_pin != GPIO_PIN_NONE)
-+		cf->reset_pin = request_pin(pdev, board->reset_pin,
-+					    "cf_reset");
-+	if (board->vcc_pin != GPIO_PIN_NONE)
-+		cf->vcc_pin = request_pin(pdev, board->vcc_pin,
-+					  "cf_vcc");
-+	if (board->ready_pin != GPIO_PIN_NONE)
-+		/* READY is also used for irq through EIM */
-+		cf->ready_pin = board->ready_pin;
-+
-+	debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
-+	      cf->detect_pin, cf->reset_pin, cf->vcc_pin);
-+
-+	cf->socket.pci_irq = irq;
-+	cf->socket.ops = &at32_cf_ops;
-+	cf->socket.resource_ops = &pccard_static_ops;
-+	cf->socket.dev.parent = &pdev->dev;
-+	cf->socket.owner = THIS_MODULE;
-+	cf->socket.features =
-+		SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
-+	cf->socket.map_size = CF_RES_SIZE;
-+
-+	cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
-+	cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
-+	cf->res_attr.name = "attribute";
-+	cf->res_attr.flags = IORESOURCE_MEM;
-+	ret = request_resource(res_skt, &cf->res_attr);
-+	if (ret)
-+		goto err_request_res_attr;
-+
-+	cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
-+	cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
-+	cf->res_mem.name = "memory";
-+	cf->res_mem.flags = IORESOURCE_MEM;
-+	ret = request_resource(res_skt, &cf->res_mem);
-+	if (ret)
-+		goto err_request_res_mem;
-+
-+	cf->res_io.start = res_skt->start + CF_IO_OFFSET;
-+	cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
-+	cf->res_io.name = "io";
-+	cf->res_io.flags = IORESOURCE_MEM;
-+	ret = request_resource(res_skt, &cf->res_io);
-+	if (ret)
-+		goto err_request_res_io;
-+
-+	cf->socket.io_offset = cf->res_io.start;
-+
-+	if (cf->detect_pin >= 0) {
-+		ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
-+				  IRQF_SHARED, "cf_detect", cf);
-+		if (ret) {
-+			debug(cf, 1,
-+			      "failed to request cf_detect interrupt\n");
-+			goto err_detect_irq;
-+		}
-+	}
-+
-+	cf->present = at32_cf_present(cf);
-+
-+	/* Setup SMC timings */
-+	smc_set_timing(&cf->smc, &at32_cf_timing);
-+
-+	cf->smc.bus_width = 2;
-+	cf->smc.nrd_controlled = 1;
-+	cf->smc.nwe_controlled = 1;
-+	cf->smc.nwait_mode = 0;
-+	cf->smc.byte_write = 0;
-+	cf->smc.tdf_cycles = 8;
-+	cf->smc.tdf_mode = 0;
-+
-+	ret = smc_set_configuration(cf->cf_cs, &cf->smc);
-+	if (ret) {
-+		debug(cf, 1, "failed to configure SMC\n", ret);
-+		goto err_smc;
-+	}
-+
-+	ret = pcmcia_register_socket(&cf->socket);
-+	if (ret) {
-+		debug(cf, 1, "failed to register socket: %d\n", ret);
-+		goto err_register_socket;
-+	}
-+
-+	if (cf->reset_pin >= 0)
-+		gpio_direction_output(cf->reset_pin, 0);
-+
-+	platform_set_drvdata(pdev, cf);
-+
-+	dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
-+		 (unsigned long)res_skt->start);
-+
-+	return 0;
-+
-+err_register_socket:
-+err_smc:
-+	if (cf->detect_pin >= 0)
-+		free_irq(gpio_to_irq(cf->detect_pin), cf);
-+err_detect_irq:
-+	release_resource(&cf->res_io);
-+err_request_res_io:
-+	release_resource(&cf->res_mem);
-+err_request_res_mem:
-+	release_resource(&cf->res_attr);
-+err_request_res_attr:
-+	if (cf->vcc_pin >= 0)
-+		gpio_free(cf->vcc_pin);
-+	if (cf->reset_pin >= 0)
-+		gpio_free(cf->reset_pin);
-+	if (cf->detect_pin >= 0)
-+		gpio_free(cf->detect_pin);
-+	kfree(cf);
-+
-+	return ret;
-+}
-+
-+static int __exit at32_cf_remove(struct platform_device *pdev)
-+{
-+	struct at32_cf_socket *cf = platform_get_drvdata(pdev);
-+
-+	pcmcia_unregister_socket(&cf->socket);
-+	if (cf->detect_pin >= 0) {
-+		free_irq(gpio_to_irq(cf->detect_pin), cf);
-+		gpio_free(cf->detect_pin);
-+	}
-+	if (cf->vcc_pin >= 0)
-+		gpio_free(cf->vcc_pin);
-+	if (cf->reset_pin >= 0)
-+		gpio_free(cf->reset_pin);
-+
-+	release_resource(&cf->res_io);
-+	release_resource(&cf->res_mem);
-+	release_resource(&cf->res_attr);
-+	kfree(cf);
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver at32_cf_driver = {
-+	.remove		= __exit_p(at32_cf_remove),
-+	.driver		= {
-+		.name	= "at32_cf",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at32_cf_init(void)
-+{
-+	int ret;
-+
-+	ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
-+	if (ret)
-+		printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
-+	return ret;
-+}
-+
-+static void __exit at32_cf_exit(void)
-+{
-+	platform_driver_unregister(&at32_cf_driver);
-+}
-+
-+module_init(at32_cf_init);
-+module_exit(at32_cf_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
---- a/drivers/rtc/rtc-at32ap700x.c
-+++ b/drivers/rtc/rtc-at32ap700x.c
-@@ -262,6 +262,7 @@ static int __init at32_rtc_probe(struct 
- 	}
- 
- 	platform_set_drvdata(pdev, rtc);
-+	device_init_wakeup(&pdev->dev, 1);
- 
- 	dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
- 			(unsigned long)rtc->regs, rtc->irq);
-@@ -281,6 +282,8 @@ static int __exit at32_rtc_remove(struct
- {
- 	struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
- 
-+	device_init_wakeup(&pdev->dev, 0);
-+
- 	free_irq(rtc->irq, rtc);
- 	iounmap(rtc->regs);
- 	rtc_device_unregister(rtc->rtc);
---- a/drivers/serial/atmel_serial.c
-+++ b/drivers/serial/atmel_serial.c
-@@ -957,6 +957,20 @@ static void atmel_shutdown(struct uart_p
- }
- 
- /*
-+ * Flush any TX data submitted for DMA. Called when the TX circular
-+ * buffer is reset.
-+ */
-+static void atmel_flush_buffer(struct uart_port *port)
-+{
-+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-+
-+	if (atmel_use_dma_tx(port)) {
-+		UART_PUT_TCR(port, 0);
-+		atmel_port->pdc_tx.ofs = 0;
-+	}
-+}
-+
-+/*
-  * Power / Clock management.
-  */
- static void atmel_serial_pm(struct uart_port *port, unsigned int state,
-@@ -1190,6 +1204,7 @@ static struct uart_ops atmel_pops = {
- 	.break_ctl	= atmel_break_ctl,
- 	.startup	= atmel_startup,
- 	.shutdown	= atmel_shutdown,
-+	.flush_buffer	= atmel_flush_buffer,
- 	.set_termios	= atmel_set_termios,
- 	.type		= atmel_type,
- 	.release_port	= atmel_release_port,
-@@ -1440,6 +1455,15 @@ static struct uart_driver atmel_uart = {
- };
- 
- #ifdef CONFIG_PM
-+static bool atmel_serial_clk_will_stop(void)
-+{
-+#ifdef CONFIG_ARCH_AT91
-+	return at91_suspend_entering_slow_clock();
-+#else
-+	return false;
-+#endif
-+}
-+
- static int atmel_serial_suspend(struct platform_device *pdev,
- 				pm_message_t state)
- {
-@@ -1447,7 +1471,7 @@ static int atmel_serial_suspend(struct p
- 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- 
- 	if (device_may_wakeup(&pdev->dev)
--	    && !at91_suspend_entering_slow_clock())
-+	    && !atmel_serial_clk_will_stop())
- 		enable_irq_wake(port->irq);
- 	else {
- 		uart_suspend_port(&atmel_uart, port);
---- a/drivers/serial/serial_core.c
-+++ b/drivers/serial/serial_core.c
-@@ -552,6 +552,8 @@ static void uart_flush_buffer(struct tty
- 
- 	spin_lock_irqsave(&port->lock, flags);
- 	uart_circ_clear(&state->info->xmit);
-+	if (port->ops->flush_buffer)
-+		port->ops->flush_buffer(port);
- 	spin_unlock_irqrestore(&port->lock, flags);
- 	tty_wakeup(tty);
- }
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -51,9 +51,7 @@ struct atmel_spi {
- 	u8			stopping;
- 	struct list_head	queue;
- 	struct spi_transfer	*current_transfer;
--	unsigned long		current_remaining_bytes;
--	struct spi_transfer	*next_transfer;
--	unsigned long		next_remaining_bytes;
-+	unsigned long		remaining_bytes;
- 
- 	void			*buffer;
- 	dma_addr_t		buffer_dma;
-@@ -133,48 +131,6 @@ static void cs_deactivate(struct atmel_s
- 		gpio_set_value(gpio, !active);
- }
- 
--static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
--					struct spi_transfer *xfer)
--{
--	return msg->transfers.prev == &xfer->transfer_list;
--}
--
--static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
--{
--	return xfer->delay_usecs == 0 && !xfer->cs_change;
--}
--
--static void atmel_spi_next_xfer_data(struct spi_master *master,
--				struct spi_transfer *xfer,
--				dma_addr_t *tx_dma,
--				dma_addr_t *rx_dma,
--				u32 *plen)
--{
--	struct atmel_spi	*as = spi_master_get_devdata(master);
--	u32			len = *plen;
--
--	/* use scratch buffer only when rx or tx data is unspecified */
--	if (xfer->rx_buf)
--		*rx_dma = xfer->rx_dma + xfer->len - len;
--	else {
--		*rx_dma = as->buffer_dma;
--		if (len > BUFFER_SIZE)
--			len = BUFFER_SIZE;
--	}
--	if (xfer->tx_buf)
--		*tx_dma = xfer->tx_dma + xfer->len - len;
--	else {
--		*tx_dma = as->buffer_dma;
--		if (len > BUFFER_SIZE)
--			len = BUFFER_SIZE;
--		memset(as->buffer, 0, len);
--		dma_sync_single_for_device(&as->pdev->dev,
--				as->buffer_dma, len, DMA_TO_DEVICE);
--	}
--
--	*plen = len;
--}
--
- /*
-  * Submit next transfer for DMA.
-  * lock is held, spi irq is blocked
-@@ -184,78 +140,53 @@ static void atmel_spi_next_xfer(struct s
- {
- 	struct atmel_spi	*as = spi_master_get_devdata(master);
- 	struct spi_transfer	*xfer;
--	u32			len, remaining, total;
-+	u32			len;
- 	dma_addr_t		tx_dma, rx_dma;
- 
--	if (!as->current_transfer)
--		xfer = list_entry(msg->transfers.next,
--				struct spi_transfer, transfer_list);
--	else if (!as->next_transfer)
--		xfer = list_entry(as->current_transfer->transfer_list.next,
--				struct spi_transfer, transfer_list);
--	else
--		xfer = NULL;
--
--	if (xfer) {
--		len = xfer->len;
--		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
--		remaining = xfer->len - len;
--
--		spi_writel(as, RPR, rx_dma);
--		spi_writel(as, TPR, tx_dma);
--
--		if (msg->spi->bits_per_word > 8)
--			len >>= 1;
--		spi_writel(as, RCR, len);
--		spi_writel(as, TCR, len);
--
--		dev_dbg(&msg->spi->dev,
--			"  start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
--			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
--			xfer->rx_buf, xfer->rx_dma);
--	} else {
--		xfer = as->next_transfer;
--		remaining = as->next_remaining_bytes;
-+	xfer = as->current_transfer;
-+	if (!xfer || as->remaining_bytes == 0) {
-+		if (xfer)
-+			xfer = list_entry(xfer->transfer_list.next,
-+					struct spi_transfer, transfer_list);
-+		else
-+			xfer = list_entry(msg->transfers.next,
-+					struct spi_transfer, transfer_list);
-+		as->remaining_bytes = xfer->len;
-+		as->current_transfer = xfer;
- 	}
- 
--	as->current_transfer = xfer;
--	as->current_remaining_bytes = remaining;
--
--	if (remaining > 0)
--		len = remaining;
--	else if (!atmel_spi_xfer_is_last(msg, xfer)
--			&& atmel_spi_xfer_can_be_chained(xfer)) {
--		xfer = list_entry(xfer->transfer_list.next,
--				struct spi_transfer, transfer_list);
--		len = xfer->len;
--	} else
--		xfer = NULL;
-+	len = as->remaining_bytes;
- 
--	as->next_transfer = xfer;
-+	tx_dma = xfer->tx_dma + xfer->len - len;
-+	rx_dma = xfer->rx_dma + xfer->len - len;
- 
--	if (xfer) {
--		total = len;
--		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
--		as->next_remaining_bytes = total - len;
--
--		spi_writel(as, RNPR, rx_dma);
--		spi_writel(as, TNPR, tx_dma);
--
--		if (msg->spi->bits_per_word > 8)
--			len >>= 1;
--		spi_writel(as, RNCR, len);
--		spi_writel(as, TNCR, len);
--
--		dev_dbg(&msg->spi->dev,
--			"  next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
--			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
--			xfer->rx_buf, xfer->rx_dma);
--	} else {
--		spi_writel(as, RNCR, 0);
--		spi_writel(as, TNCR, 0);
-+	/* use scratch buffer only when rx or tx data is unspecified */
-+	if (!xfer->rx_buf) {
-+		rx_dma = as->buffer_dma;
-+		if (len > BUFFER_SIZE)
-+			len = BUFFER_SIZE;
- 	}
-+	if (!xfer->tx_buf) {
-+		tx_dma = as->buffer_dma;
-+		if (len > BUFFER_SIZE)
-+			len = BUFFER_SIZE;
-+		memset(as->buffer, 0, len);
-+		dma_sync_single_for_device(&as->pdev->dev,
-+				as->buffer_dma, len, DMA_TO_DEVICE);
-+	}
-+
-+	spi_writel(as, RPR, rx_dma);
-+	spi_writel(as, TPR, tx_dma);
- 
--	/* REVISIT: We're waiting for ENDRX before we start the next
-+	as->remaining_bytes -= len;
-+	if (msg->spi->bits_per_word > 8)
-+		len >>= 1;
-+
-+	/* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
-+	 * mechanism might help avoid the IRQ latency between transfers
-+	 * (and improve the nCS0 errata handling on at91rm9200 chips)
-+	 *
-+	 * We're also waiting for ENDRX before we start the next
- 	 * transfer because we need to handle some difficult timing
- 	 * issues otherwise. If we wait for ENDTX in one transfer and
- 	 * then starts waiting for ENDRX in the next, it's difficult
-@@ -265,7 +196,17 @@ static void atmel_spi_next_xfer(struct s
- 	 *
- 	 * It should be doable, though. Just not now...
- 	 */
-+	spi_writel(as, TNCR, 0);
-+	spi_writel(as, RNCR, 0);
- 	spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
-+
-+	dev_dbg(&msg->spi->dev,
-+		"  start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
-+		xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-+		xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
-+
-+	spi_writel(as, RCR, len);
-+	spi_writel(as, TCR, len);
- 	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
- }
- 
-@@ -363,7 +304,6 @@ atmel_spi_msg_done(struct spi_master *ma
- 	spin_lock(&as->lock);
- 
- 	as->current_transfer = NULL;
--	as->next_transfer = NULL;
- 
- 	/* continue if needed */
- 	if (list_empty(&as->queue) || as->stopping)
-@@ -447,7 +387,7 @@ atmel_spi_interrupt(int irq, void *dev_i
- 
- 		spi_writel(as, IDR, pending);
- 
--		if (as->current_remaining_bytes == 0) {
-+		if (as->remaining_bytes == 0) {
- 			msg->actual_length += xfer->len;
- 
- 			if (!msg->is_dma_mapped)
-@@ -457,7 +397,7 @@ atmel_spi_interrupt(int irq, void *dev_i
- 			if (xfer->delay_usecs)
- 				udelay(xfer->delay_usecs);
- 
--			if (atmel_spi_xfer_is_last(msg, xfer)) {
-+			if (msg->transfers.prev == &xfer->transfer_list) {
- 				/* report completed message */
- 				atmel_spi_msg_done(master, as, msg, 0,
- 						xfer->cs_change);
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -118,10 +118,10 @@ config USB_AMD5536UDC
- config USB_GADGET_ATMEL_USBA
- 	boolean "Atmel USBA"
- 	select USB_GADGET_DUALSPEED
--	depends on AVR32
-+	depends on AVR32 || ARCH_AT91CAP9
- 	help
- 	  USBA is the integrated high-speed USB Device controller on
--	  the AT32AP700x processors from Atmel.
-+	  the AT32AP700x and AT91CAP9 processors from Atmel.
- 
- config USB_ATMEL_USBA
- 	tristate
---- a/drivers/usb/gadget/atmel_usba_udc.c
-+++ b/drivers/usb/gadget/atmel_usba_udc.c
-@@ -18,6 +18,7 @@
- #include <linux/platform_device.h>
- #include <linux/usb/ch9.h>
- #include <linux/usb/gadget.h>
-+#include <linux/usb/atmel_usba_udc.h>
- #include <linux/delay.h>
- 
- #include <asm/gpio.h>
-@@ -27,6 +28,7 @@
- 
- 
- static struct usba_udc the_udc;
-+static struct usba_ep *usba_ep;
- 
- #ifdef CONFIG_USB_GADGET_DEBUG_FS
- #include <linux/debugfs.h>
-@@ -324,53 +326,28 @@ static int vbus_is_present(struct usba_u
- 	return 1;
- }
- 
--static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
--{
--	unsigned long tmp;
-+#if defined(CONFIG_AVR32)
- 
--	DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
--	for (; len > 0; len -= 4, buf += 4, fifo += 4) {
--		tmp = *(unsigned long *)buf;
--		if (len >= 4) {
--			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
--			__raw_writel(tmp, fifo);
--		} else {
--			do {
--				DBG(DBG_FIFO, "  -> %02lx\n", tmp >> 24);
--				__raw_writeb(tmp >> 24, fifo);
--				fifo++;
--				tmp <<= 8;
--			} while (--len);
--			break;
--		}
--	}
-+static void toggle_bias(int is_on)
-+{
- }
- 
--static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
-+#elif defined(CONFIG_ARCH_AT91)
-+
-+#include <asm/arch/at91_pmc.h>
-+
-+static void toggle_bias(int is_on)
- {
--	union {
--		unsigned long *w;
--		unsigned char *b;
--	} p;
--	unsigned long tmp;
--
--	DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
--	for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
--		if (len >= 4) {
--			tmp = __raw_readl(fifo);
--			*p.w = tmp;
--			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
--		} else {
--			do {
--				tmp = __raw_readb(fifo);
--				*p.b = tmp;
--				DBG(DBG_FIFO, " -> %02lx\n", tmp);
--				fifo++, p.b++;
--			} while (--len);
--		}
--	}
-+	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
-+
-+	if (is_on)
-+		at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
-+	else
-+		at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
- }
- 
-+#endif /* CONFIG_ARCH_AT91 */
-+
- static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
- {
- 	unsigned int transaction_len;
-@@ -387,7 +364,7 @@ static void next_fifo_transaction(struct
- 		ep->ep.name, req, transaction_len,
- 		req->last_transaction ? ", done" : "");
- 
--	copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
-+	memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len);
- 	usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
- 	req->req.actual += transaction_len;
- }
-@@ -476,7 +453,7 @@ static void receive_data(struct usba_ep 
- 			bytecount = req->req.length - req->req.actual;
- 		}
- 
--		copy_from_fifo(req->req.buf + req->req.actual,
-+		memcpy_fromio(req->req.buf + req->req.actual,
- 				ep->fifo, bytecount);
- 		req->req.actual += bytecount;
- 
-@@ -1029,33 +1006,6 @@ static const struct usb_gadget_ops usba_
- 	.set_selfpowered	= usba_udc_set_selfpowered,
- };
- 
--#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
--{								\
--	.ep	= {						\
--		.ops		= &usba_ep_ops,			\
--		.name		= nam,				\
--		.maxpacket	= maxpkt,			\
--	},							\
--	.udc		= &the_udc,				\
--	.queue		= LIST_HEAD_INIT(usba_ep[idx].queue),	\
--	.fifo_size	= maxpkt,				\
--	.nr_banks	= maxbk,				\
--	.index		= idx,					\
--	.can_dma	= dma,					\
--	.can_isoc	= isoc,					\
--}
--
--static struct usba_ep usba_ep[] = {
--	EP("ep0", 0, 64, 1, 0, 0),
--	EP("ep1in-bulk", 1, 512, 2, 1, 1),
--	EP("ep2out-bulk", 2, 512, 2, 1, 1),
--	EP("ep3in-int", 3, 64, 3, 1, 0),
--	EP("ep4out-int", 4, 64, 3, 1, 0),
--	EP("ep5in-iso", 5, 1024, 3, 1, 1),
--	EP("ep6out-iso", 6, 1024, 3, 1, 1),
--};
--#undef EP
--
- static struct usb_endpoint_descriptor usba_ep0_desc = {
- 	.bLength = USB_DT_ENDPOINT_SIZE,
- 	.bDescriptorType = USB_DT_ENDPOINT,
-@@ -1074,7 +1024,6 @@ static void nop_release(struct device *d
- static struct usba_udc the_udc = {
- 	.gadget	= {
- 		.ops		= &usba_udc_ops,
--		.ep0		= &usba_ep[0].ep,
- 		.ep_list	= LIST_HEAD_INIT(the_udc.gadget.ep_list),
- 		.is_dualspeed	= 1,
- 		.name		= "atmel_usba_udc",
-@@ -1231,7 +1180,7 @@ static int do_test_mode(struct usba_udc 
- 		} else {
- 			usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
- 			usba_writel(udc, TST, USBA_TST_PKT_MODE);
--			copy_to_fifo(ep->fifo, test_packet_buffer,
-+			memcpy_toio(ep->fifo, test_packet_buffer,
- 					sizeof(test_packet_buffer));
- 			usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
- 			dev_info(dev, "Entering Test_Packet mode...\n");
-@@ -1530,13 +1479,13 @@ restart:
- 		DBG(DBG_HW, "Packet length: %u\n", pkt_len);
- 		if (pkt_len != sizeof(crq)) {
- 			pr_warning("udc: Invalid packet length %u "
--				"(expected %lu)\n", pkt_len, sizeof(crq));
-+				"(expected %zu)\n", pkt_len, sizeof(crq));
- 			set_protocol_stall(udc, ep);
- 			return;
- 		}
- 
- 		DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
--		copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
-+		memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
- 
- 		/* Free up one bank in the FIFO so that we can
- 		 * generate or receive a reply right away. */
-@@ -1688,6 +1637,7 @@ static irqreturn_t usba_udc_irq(int irq,
- 	DBG(DBG_INT, "irq, status=%#08x\n", status);
- 
- 	if (status & USBA_DET_SUSPEND) {
-+		toggle_bias(0);
- 		usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
- 		DBG(DBG_BUS, "Suspend detected\n");
- 		if (udc->gadget.speed != USB_SPEED_UNKNOWN
-@@ -1699,6 +1649,7 @@ static irqreturn_t usba_udc_irq(int irq,
- 	}
- 
- 	if (status & USBA_WAKE_UP) {
-+		toggle_bias(1);
- 		usba_writel(udc, INT_CLR, USBA_WAKE_UP);
- 		DBG(DBG_BUS, "Wake Up CPU detected\n");
- 	}
-@@ -1792,12 +1743,14 @@ static irqreturn_t usba_vbus_irq(int irq
- 	vbus = gpio_get_value(udc->vbus_pin);
- 	if (vbus != udc->vbus_prev) {
- 		if (vbus) {
--			usba_writel(udc, CTRL, USBA_EN_USBA);
-+			toggle_bias(1);
-+			usba_writel(udc, CTRL, USBA_ENABLE_MASK);
- 			usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
- 		} else {
- 			udc->gadget.speed = USB_SPEED_UNKNOWN;
- 			reset_all_endpoints(udc);
--			usba_writel(udc, CTRL, 0);
-+			toggle_bias(0);
-+			usba_writel(udc, CTRL, USBA_DISABLE_MASK);
- 			spin_unlock(&udc->lock);
- 			udc->driver->disconnect(&udc->gadget);
- 			spin_lock(&udc->lock);
-@@ -1850,7 +1803,8 @@ int usb_gadget_register_driver(struct us
- 	/* If Vbus is present, enable the controller and wait for reset */
- 	spin_lock_irqsave(&udc->lock, flags);
- 	if (vbus_is_present(udc) && udc->vbus_prev == 0) {
--		usba_writel(udc, CTRL, USBA_EN_USBA);
-+		toggle_bias(1);
-+		usba_writel(udc, CTRL, USBA_ENABLE_MASK);
- 		usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
- 	}
- 	spin_unlock_irqrestore(&udc->lock, flags);
-@@ -1883,7 +1837,8 @@ int usb_gadget_unregister_driver(struct 
- 	spin_unlock_irqrestore(&udc->lock, flags);
- 
- 	/* This will also disable the DP pullup */
--	usba_writel(udc, CTRL, 0);
-+	toggle_bias(0);
-+	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
- 
- 	driver->unbind(&udc->gadget);
- 	udc->gadget.dev.driver = NULL;
-@@ -1908,7 +1863,7 @@ static int __init usba_udc_probe(struct 
- 
- 	regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
- 	fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
--	if (!regs || !fifo)
-+	if (!regs || !fifo || !pdata)
- 		return -ENXIO;
- 
- 	irq = platform_get_irq(pdev, 0);
-@@ -1953,19 +1908,48 @@ static int __init usba_udc_probe(struct 
- 
- 	/* Make sure we start from a clean slate */
- 	clk_enable(pclk);
--	usba_writel(udc, CTRL, 0);
-+	toggle_bias(0);
-+	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
- 	clk_disable(pclk);
- 
-+	usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
-+			  GFP_KERNEL);
-+	if (!usba_ep)
-+		goto err_alloc_ep;
-+
-+	the_udc.gadget.ep0 = &usba_ep[0].ep;
-+
- 	INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
- 	usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
- 	usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
- 	usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
--	for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
-+	usba_ep[0].ep.ops = &usba_ep_ops;
-+	usba_ep[0].ep.name = pdata->ep[0].name;
-+	usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
-+	usba_ep[0].udc = &the_udc;
-+	INIT_LIST_HEAD(&usba_ep[0].queue);
-+	usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
-+	usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
-+	usba_ep[0].index = pdata->ep[0].index;
-+	usba_ep[0].can_dma = pdata->ep[0].can_dma;
-+	usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
-+
-+	for (i = 1; i < pdata->num_ep; i++) {
- 		struct usba_ep *ep = &usba_ep[i];
- 
- 		ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
- 		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
- 		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
-+		ep->ep.ops = &usba_ep_ops;
-+		ep->ep.name = pdata->ep[i].name;
-+		ep->ep.maxpacket = pdata->ep[i].fifo_size;
-+		ep->udc = &the_udc;
-+		INIT_LIST_HEAD(&ep->queue);
-+		ep->fifo_size = pdata->ep[i].fifo_size;
-+		ep->nr_banks = pdata->ep[i].nr_banks;
-+		ep->index = pdata->ep[i].index;
-+		ep->can_dma = pdata->ep[i].can_dma;
-+		ep->can_isoc = pdata->ep[i].can_isoc;
- 
- 		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
- 	}
-@@ -1984,7 +1968,7 @@ static int __init usba_udc_probe(struct 
- 		goto err_device_add;
- 	}
- 
--	if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
-+	if (pdata->vbus_pin >= 0) {
- 		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
- 			udc->vbus_pin = pdata->vbus_pin;
- 
-@@ -2004,7 +1988,7 @@ static int __init usba_udc_probe(struct 
- 	}
- 
- 	usba_init_debugfs(udc);
--	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+	for (i = 1; i < pdata->num_ep; i++)
- 		usba_ep_init_debugfs(udc, &usba_ep[i]);
- 
- 	return 0;
-@@ -2012,6 +1996,8 @@ static int __init usba_udc_probe(struct 
- err_device_add:
- 	free_irq(irq, udc);
- err_request_irq:
-+	kfree(usba_ep);
-+err_alloc_ep:
- 	iounmap(udc->fifo);
- err_map_fifo:
- 	iounmap(udc->regs);
-@@ -2029,10 +2015,11 @@ static int __exit usba_udc_remove(struct
- {
- 	struct usba_udc *udc;
- 	int i;
-+	struct usba_platform_data *pdata = pdev->dev.platform_data;
- 
- 	udc = platform_get_drvdata(pdev);
- 
--	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+	for (i = 1; i < pdata->num_ep; i++)
- 		usba_ep_cleanup_debugfs(&usba_ep[i]);
- 	usba_cleanup_debugfs(udc);
- 
-@@ -2040,6 +2027,7 @@ static int __exit usba_udc_remove(struct
- 		gpio_free(udc->vbus_pin);
- 
- 	free_irq(udc->irq, udc);
-+	kfree(usba_ep);
- 	iounmap(udc->fifo);
- 	iounmap(udc->regs);
- 	clk_put(udc->hclk);
---- a/drivers/usb/gadget/atmel_usba_udc.h
-+++ b/drivers/usb/gadget/atmel_usba_udc.h
-@@ -41,6 +41,15 @@
- #define USBA_EN_USBA				(1 <<  8)
- #define USBA_DETACH				(1 <<  9)
- #define USBA_REMOTE_WAKE_UP			(1 << 10)
-+#define USBA_PULLD_DIS				(1 << 11)
-+
-+#if defined(CONFIG_AVR32)
-+#define USBA_ENABLE_MASK			USBA_EN_USBA
-+#define USBA_DISABLE_MASK			0
-+#elif defined(CONFIG_ARCH_AT91)
-+#define USBA_ENABLE_MASK			(USBA_EN_USBA | USBA_PULLD_DIS)
-+#define USBA_DISABLE_MASK			USBA_DETACH
-+#endif /* CONFIG_ARCH_AT91 */
- 
- /* Bitfields in FNUM */
- #define USBA_MICRO_FRAME_NUM_OFFSET		0
---- a/drivers/video/atmel_lcdfb.c
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -38,7 +38,9 @@
- #endif
- 
- #if defined(CONFIG_ARCH_AT91)
--#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
-+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
-+					 | FBINFO_PARTIAL_PAN_OK \
-+					 | FBINFO_HWACCEL_YPAN)
- 
- static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- 					struct fb_var_screeninfo *var)
-@@ -176,7 +178,7 @@ static struct fb_fix_screeninfo atmel_lc
- 	.type		= FB_TYPE_PACKED_PIXELS,
- 	.visual		= FB_VISUAL_TRUECOLOR,
- 	.xpanstep	= 0,
--	.ypanstep	= 0,
-+	.ypanstep	= 1,
- 	.ywrapstep	= 0,
- 	.accel		= FB_ACCEL_NONE,
- };
-@@ -250,6 +252,8 @@ static int atmel_lcdfb_alloc_video_memor
- 		return -ENOMEM;
- 	}
- 
-+	memset(info->screen_base, 0, info->fix.smem_len);
-+
- 	return 0;
- }
- 
-@@ -634,7 +638,6 @@ static int __init atmel_lcdfb_init_fbinf
- 	struct fb_info *info = sinfo->info;
- 	int ret = 0;
- 
--	memset_io(info->screen_base, 0, info->fix.smem_len);
- 	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
- 
- 	dev_info(info->device,
-@@ -764,6 +767,11 @@ static int __init atmel_lcdfb_probe(stru
- 		info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
- 		if (!info->screen_base)
- 			goto release_intmem;
-+
-+		/*
-+		 * Don't clear the framebuffer -- someone may have set
-+		 * up a splash image.
-+		 */
- 	} else {
- 		/* alocate memory buffer */
- 		ret = atmel_lcdfb_alloc_video_memory(sinfo);
---- a/fs/fs-writeback.c
-+++ b/fs/fs-writeback.c
-@@ -385,8 +385,6 @@ __writeback_single_inode(struct inode *i
-  * WB_SYNC_HOLD is a hack for sys_sync(): reattach the inode to sb->s_dirty so
-  * that it can be located for waiting on in __writeback_single_inode().
-  *
-- * Called under inode_lock.
-- *
-  * If `bdi' is non-zero then we're being asked to writeback a specific queue.
-  * This function assumes that the blockdev superblock's inodes are backed by
-  * a variety of queues, so all inodes are searched.  For other superblocks,
-@@ -402,11 +400,12 @@ __writeback_single_inode(struct inode *i
-  * on the writer throttling path, and we get decent balancing between many
-  * throttled threads: we don't want them all piling up on inode_sync_wait.
-  */
--static void
--sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc)
-+void generic_sync_sb_inodes(struct super_block *sb,
-+				struct writeback_control *wbc)
- {
- 	const unsigned long start = jiffies;	/* livelock avoidance */
- 
-+	spin_lock(&inode_lock);
- 	if (!wbc->for_kupdate || list_empty(&sb->s_io))
- 		queue_io(sb, wbc->older_than_this);
- 
-@@ -485,8 +484,16 @@ sync_sb_inodes(struct super_block *sb, s
- 		if (!list_empty(&sb->s_more_io))
- 			wbc->more_io = 1;
- 	}
-+	spin_unlock(&inode_lock);
- 	return;		/* Leave any unwritten inodes on s_io */
- }
-+EXPORT_SYMBOL_GPL(generic_sync_sb_inodes);
-+
-+static void sync_sb_inodes(struct super_block *sb,
-+				struct writeback_control *wbc)
-+{
-+	generic_sync_sb_inodes(sb, wbc);
-+}
- 
- /*
-  * Start writeback of dirty pagecache data against all unlocked inodes.
-@@ -526,11 +533,8 @@ restart:
- 			 * be unmounted by the time it is released.
- 			 */
- 			if (down_read_trylock(&sb->s_umount)) {
--				if (sb->s_root) {
--					spin_lock(&inode_lock);
-+				if (sb->s_root)
- 					sync_sb_inodes(sb, wbc);
--					spin_unlock(&inode_lock);
--				}
- 				up_read(&sb->s_umount);
- 			}
- 			spin_lock(&sb_lock);
-@@ -568,9 +572,7 @@ void sync_inodes_sb(struct super_block *
- 			(inodes_stat.nr_inodes - inodes_stat.nr_unused) +
- 			nr_dirty + nr_unstable;
- 	wbc.nr_to_write += wbc.nr_to_write / 2;		/* Bit more for luck */
--	spin_lock(&inode_lock);
- 	sync_sb_inodes(sb, &wbc);
--	spin_unlock(&inode_lock);
- }
- 
- /*
---- a/include/asm-avr32/arch-at32ap/board.h
-+++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -8,6 +8,12 @@
- 
- #define GPIO_PIN_NONE	(-1)
- 
-+/*
-+ * Clock rates for various on-board oscillators. The number of entries
-+ * in this array is chip-dependent.
-+ */
-+extern unsigned long at32_board_osc_rates[];
-+  
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
- 
-@@ -36,11 +42,10 @@ at32_add_device_spi(unsigned int id, str
- struct atmel_lcdfb_info;
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
--		     unsigned long fbmem_start, unsigned long fbmem_len);
-+		     unsigned long fbmem_start, unsigned long fbmem_len,
-+		     unsigned int pin_config);
- 
--struct usba_platform_data {
--	int vbus_pin;
--};
-+struct usba_platform_data;
- struct platform_device *
- at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
- 
-@@ -68,9 +73,27 @@ struct platform_device *at32_add_device_
- struct platform_device *
- at32_add_device_ssc(unsigned int id, unsigned int flags);
- 
--struct platform_device *at32_add_device_twi(unsigned int id);
--struct platform_device *at32_add_device_mci(unsigned int id);
--struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct i2c_board_info;
-+struct platform_device *at32_add_device_twi(unsigned int id,
-+					    struct i2c_board_info *b,
-+					    unsigned int n);
-+
-+struct mci_platform_data {
-+	int detect_pin;
-+	int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+
-+struct ac97c_platform_data {
-+	unsigned short dma_rx_periph_id;
-+	unsigned short dma_tx_periph_id;
-+	unsigned short dma_controller_id;
-+	int reset_pin;
-+};
-+struct platform_device *
-+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
-+
- struct platform_device *at32_add_device_abdac(unsigned int id);
- 
- struct cf_platform_data {
-@@ -84,4 +107,20 @@ struct platform_device *
- at32_add_device_cf(unsigned int id, unsigned int extint,
- 		struct cf_platform_data *data);
- 
-+struct platform_device *
-+at32_add_device_psif(unsigned int id);
-+
-+/* NAND / SmartMedia */
-+struct atmel_nand_data {
-+	int	enable_pin;	/* chip enable */
-+	int	det_pin;	/* card detect */
-+	int	rdy_pin;	/* ready/busy */
-+	u8	ale;		/* address line number connected to ALE */
-+	u8	cle;		/* address line number connected to CLE */
-+	u8	bus_width_16;	/* buswidth is 16 bit */
-+	struct mtd_partition *(*partition_info)(int size, int *num_partitions);
-+};
-+struct platform_device *
-+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
-+
- #endif /* __ASM_ARCH_BOARD_H */
---- a/include/asm-avr32/arch-at32ap/init.h
-+++ b/include/asm-avr32/arch-at32ap/init.h
-@@ -13,10 +13,6 @@
- void setup_platform(void);
- void setup_board(void);
- 
--/* Called by setup_platform */
--void at32_clock_init(void);
--void at32_portmux_init(void);
--
- void at32_setup_serial_console(unsigned int usart_id);
- 
- #endif /* __ASM_AVR32_AT32AP_INIT_H__ */
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/pm.h
-@@ -0,0 +1,51 @@
-+/*
-+ * AVR32 AP Power Management.
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_ARCH_PM_H
-+#define __ASM_AVR32_ARCH_PM_H
-+
-+/* Possible arguments to the "sleep" instruction */
-+#define CPU_SLEEP_IDLE		0
-+#define CPU_SLEEP_FROZEN	1
-+#define CPU_SLEEP_STANDBY	2
-+#define CPU_SLEEP_STOP		3
-+#define CPU_SLEEP_STATIC	5
-+
-+#ifndef __ASSEMBLY__
-+extern void cpu_enter_idle(void);
-+extern void cpu_enter_standby(unsigned long sdramc_base);
-+
-+extern bool disable_idle_sleep;
-+
-+static inline void cpu_disable_idle_sleep(void)
-+{
-+	disable_idle_sleep = true;
-+}
-+
-+static inline void cpu_enable_idle_sleep(void)
-+{
-+	disable_idle_sleep = false;
-+}
-+
-+static inline void cpu_idle_sleep(void)
-+{
-+	/*
-+	 * If we're using the COUNT and COMPARE registers for
-+	 * timekeeping, we can't use the IDLE state.
-+	 */
-+	if (disable_idle_sleep)
-+		cpu_relax();
-+	else
-+		cpu_enter_idle();
-+}
-+
-+void intc_set_suspend_handler(unsigned long offset);
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_PM_H */
---- a/include/asm-avr32/arch-at32ap/portmux.h
-+++ b/include/asm-avr32/arch-at32ap/portmux.h
-@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin
- void at32_select_gpio(unsigned int pin, unsigned long flags);
- void at32_reserve_pin(unsigned int pin);
- 
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port);
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
-+void at32_deselect_pins(unsigned int port, u32 pins);
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
- #endif /* __ASM_ARCH_PORTMUX_H__ */
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/sram.h
-@@ -0,0 +1,30 @@
-+/*
-+ * Simple SRAM allocator
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_ARCH_SRAM_H
-+#define __ASM_AVR32_ARCH_SRAM_H
-+
-+#include <linux/genalloc.h>
-+
-+extern struct gen_pool *sram_pool;
-+
-+static inline unsigned long sram_alloc(size_t len)
-+{
-+	if (!sram_pool)
-+		return 0UL;
-+
-+	return gen_pool_alloc(sram_pool, len);
-+}
-+
-+static inline void sram_free(unsigned long addr, size_t len)
-+{
-+	return gen_pool_free(sram_pool, addr, len);
-+}
-+
-+#endif /* __ASM_AVR32_ARCH_SRAM_H */
---- a/include/asm-avr32/arch-at32ap/time.h
-+++ /dev/null
-@@ -1,112 +0,0 @@
--/*
-- * Copyright (C) 2007 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
--#define _ASM_AVR32_ARCH_AT32AP_TIME_H
--
--#include <linux/platform_device.h>
--
--extern struct irqaction timer_irqaction;
--extern struct platform_device at32_systc0_device;
--extern void local_timer_interrupt(int irq, void *dev_id);
--
--#define TIMER_BCR					0x000000c0
--#define TIMER_BCR_SYNC						 0
--#define TIMER_BMR					0x000000c4
--#define TIMER_BMR_TC0XC0S					 0
--#define TIMER_BMR_TC1XC1S					 2
--#define TIMER_BMR_TC2XC2S					 4
--#define TIMER_CCR					0x00000000
--#define TIMER_CCR_CLKDIS					 1
--#define TIMER_CCR_CLKEN						 0
--#define TIMER_CCR_SWTRG						 2
--#define TIMER_CMR					0x00000004
--#define TIMER_CMR_ABETRG					10
--#define TIMER_CMR_ACPA						16
--#define TIMER_CMR_ACPC						18
--#define TIMER_CMR_AEEVT						20
--#define TIMER_CMR_ASWTRG					22
--#define TIMER_CMR_BCPB						24
--#define TIMER_CMR_BCPC						26
--#define TIMER_CMR_BEEVT						28
--#define TIMER_CMR_BSWTRG					30
--#define TIMER_CMR_BURST						 4
--#define TIMER_CMR_CLKI						 3
--#define TIMER_CMR_CPCDIS					 7
--#define TIMER_CMR_CPCSTOP					 6
--#define TIMER_CMR_CPCTRG					14
--#define TIMER_CMR_EEVT						10
--#define TIMER_CMR_EEVTEDG					 8
--#define TIMER_CMR_ENETRG					12
--#define TIMER_CMR_ETRGEDG					 8
--#define TIMER_CMR_LDBDIS					 7
--#define TIMER_CMR_LDBSTOP					 6
--#define TIMER_CMR_LDRA						16
--#define TIMER_CMR_LDRB						18
--#define TIMER_CMR_TCCLKS					 0
--#define TIMER_CMR_WAVE						15
--#define TIMER_CMR_WAVSEL					13
--#define TIMER_CV					0x00000010
--#define TIMER_CV_CV						 0
--#define TIMER_IDR					0x00000028
--#define TIMER_IDR_COVFS						 0
--#define TIMER_IDR_CPAS						 2
--#define TIMER_IDR_CPBS						 3
--#define TIMER_IDR_CPCS						 4
--#define TIMER_IDR_ETRGS						 7
--#define TIMER_IDR_LDRAS						 5
--#define TIMER_IDR_LDRBS						 6
--#define TIMER_IDR_LOVRS						 1
--#define TIMER_IER					0x00000024
--#define TIMER_IER_COVFS						 0
--#define TIMER_IER_CPAS						 2
--#define TIMER_IER_CPBS						 3
--#define TIMER_IER_CPCS						 4
--#define TIMER_IER_ETRGS						 7
--#define TIMER_IER_LDRAS						 5
--#define TIMER_IER_LDRBS						 6
--#define TIMER_IER_LOVRS						 1
--#define TIMER_IMR					0x0000002c
--#define TIMER_IMR_COVFS						 0
--#define TIMER_IMR_CPAS						 2
--#define TIMER_IMR_CPBS						 3
--#define TIMER_IMR_CPCS						 4
--#define TIMER_IMR_ETRGS						 7
--#define TIMER_IMR_LDRAS						 5
--#define TIMER_IMR_LDRBS						 6
--#define TIMER_IMR_LOVRS						 1
--#define TIMER_RA					0x00000014
--#define TIMER_RA_RA						 0
--#define TIMER_RB					0x00000018
--#define TIMER_RB_RB						 0
--#define TIMER_RC					0x0000001c
--#define TIMER_RC_RC						 0
--#define TIMER_SR					0x00000020
--#define TIMER_SR_CLKSTA						16
--#define TIMER_SR_COVFS						 0
--#define TIMER_SR_CPAS						 2
--#define TIMER_SR_CPBS						 3
--#define TIMER_SR_CPCS						 4
--#define TIMER_SR_ETRGS						 7
--#define TIMER_SR_LDRAS						 5
--#define TIMER_SR_LDRBS						 6
--#define TIMER_SR_LOVRS						 1
--#define TIMER_SR_MTIOA						17
--#define TIMER_SR_MTIOB						18
--
--/* Bit manipulation macros */
--#define TIMER_BIT(name)		(1 << TIMER_##name)
--#define TIMER_BF(name,value)	((value) << TIMER_##name)
--
--/* Register access macros */
--#define timer_read(port,instance,reg) \
--	__raw_readl(port + (0x40 * instance) + TIMER_##reg)
--#define timer_write(port,instance,reg,value) \
--	__raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
--
--#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
---- a/include/asm-avr32/asm.h
-+++ b/include/asm-avr32/asm.h
-@@ -12,10 +12,10 @@
- #include <asm/asm-offsets.h>
- #include <asm/thread_info.h>
- 
--#define mask_interrupts		ssrf	SR_GM_BIT
--#define mask_exceptions		ssrf	SR_EM_BIT
--#define unmask_interrupts	csrf	SR_GM_BIT
--#define unmask_exceptions	csrf	SR_EM_BIT
-+#define mask_interrupts		ssrf	SYSREG_GM_OFFSET
-+#define mask_exceptions		ssrf	SYSREG_EM_OFFSET
-+#define unmask_interrupts	csrf	SYSREG_GM_OFFSET
-+#define unmask_exceptions	csrf	SYSREG_EM_OFFSET
- 
- #ifdef CONFIG_FRAME_POINTER
- 	.macro	save_fp
---- /dev/null
-+++ b/include/asm-avr32/dma-controller.h
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM		0x0000
-+#define DMA_DIR_MEM_TO_PERIPH		0x0001
-+#define DMA_DIR_PERIPH_TO_MEM		0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
-+
-+#define DMA_WIDTH_8BIT			0
-+#define DMA_WIDTH_16BIT			1
-+#define DMA_WIDTH_32BIT			2
-+
-+struct dma_request {
-+	struct dma_controller *dmac;
-+	struct list_head list;
-+
-+	unsigned short channel;
-+
-+	void (*xfer_complete)(struct dma_request *req);
-+	void (*block_complete)(struct dma_request *req);
-+	void (*error)(struct dma_request *req);
-+};
-+
-+struct dma_request_sg {
-+	struct dma_request req;
-+
-+	int nr_sg;
-+	struct scatterlist *sg;
-+	unsigned long block_size;
-+	unsigned int nr_blocks;
-+
-+	dma_addr_t data_reg;
-+	unsigned short periph_id;
-+
-+	unsigned char direction;
-+	unsigned char width;
-+};
-+#define to_dma_request_sg(_req)				\
-+	container_of(_req, struct dma_request_sg, req)
-+
-+struct dma_request_cyclic {
-+	struct dma_request req;
-+
-+        int periods;
-+	unsigned long buffer_size;
-+
-+        dma_addr_t buffer_start;
-+	dma_addr_t data_reg;
-+
-+	unsigned short periph_id;
-+	unsigned char direction;
-+	unsigned char width;
-+
-+        void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req)				\
-+	container_of(_req, struct dma_request_cyclic, req)
-+
-+struct dma_request_memcpy {
-+	struct dma_request req;
-+
-+	dma_addr_t src_addr;
-+	unsigned int src_width;
-+	unsigned int src_stride;
-+
-+	dma_addr_t dst_addr;
-+	unsigned int dst_width;
-+	unsigned int dst_stride;
-+
-+	size_t length;
-+
-+	unsigned short src_reverse:1;
-+	unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req)				\
-+	container_of(_req, struct dma_request_memcpy, req)
-+
-+struct dma_controller {
-+	struct list_head list;
-+	int id;
-+	struct device *dev;
-+
-+	int (*alloc_channel)(struct dma_controller *dmac);
-+	void (*release_channel)(struct dma_controller *dmac,
-+				int channel);
-+	int (*prepare_request_sg)(struct dma_controller *dmac,
-+				  struct dma_request_sg *req);
-+        int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+				      struct dma_request_cyclic *req);
-+	int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+				      struct dma_request_memcpy *req);
-+	int (*start_request)(struct dma_controller *dmac,
-+			     unsigned int channel);
-+	int (*stop_request)(struct dma_controller *dmac,
-+                            unsigned int channel);
-+        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+                                      unsigned int channel);
-+};
-+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+	return dmac->alloc_channel(dmac);
-+}
-+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+	dmac->release_channel(dmac, chan);
-+}
-+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+		       struct dma_request_sg *req)
-+{
-+	return dmac->prepare_request_sg(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+			   struct dma_request_cyclic *req)
-+{
-+	return dmac->prepare_request_cyclic(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+			   struct dma_request_memcpy *req)
-+{
-+	return dmac->prepare_request_memcpy(dmac, req);
-+}
-+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+		  unsigned int channel)
-+{
-+	return dmac->start_request(dmac, channel);
-+}
-+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+                 unsigned int channel)
-+{
-+	return dmac->stop_request(dmac, channel);
-+}
-+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+                    unsigned int channel)
-+{
-+	return dmac->get_current_pos(dmac, channel);
-+}
-+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
-+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
---- a/include/asm-avr32/intc.h
-+++ /dev/null
-@@ -1,128 +0,0 @@
--#ifndef __ASM_AVR32_INTC_H
--#define __ASM_AVR32_INTC_H
--
--#include <linux/sysdev.h>
--#include <linux/interrupt.h>
--
--struct irq_controller;
--struct irqaction;
--struct pt_regs;
--
--struct platform_device;
--
--/* Information about the internal interrupt controller */
--struct intc_device {
--	/* ioremapped address of configuration block */
--	void __iomem *regs;
--
--	/* the physical device */
--	struct platform_device *pdev;
--
--	/* Number of interrupt lines per group. */
--	unsigned int irqs_per_group;
--
--	/* The highest group ID + 1 */
--	unsigned int nr_groups;
--
--	/*
--	 * Bitfield indicating which groups are actually in use.  The
--	 * size of the array is
--	 * ceil(group_max / (8 * sizeof(unsigned int))).
--	 */
--	unsigned int group_mask[];
--};
--
--struct irq_controller_class {
--	/*
--	 * A short name identifying this kind of controller.
--	 */
--	const char *typename;
--	/*
--	 * Handle the IRQ.  Must do any necessary acking and masking.
--	 */
--	irqreturn_t (*handle)(int irq, void *dev_id, struct pt_regs *regs);
--	/*
--	 * Register a new IRQ handler.
--	 */
--	int (*setup)(struct irq_controller *ctrl, unsigned int irq,
--		     struct irqaction *action);
--	/*
--	 * Unregister a IRQ handler.
--	 */
--	void (*free)(struct irq_controller *ctrl, unsigned int irq,
--		     void *dev_id);
--	/*
--	 * Mask the IRQ in the interrupt controller.
--	 */
--	void (*mask)(struct irq_controller *ctrl, unsigned int irq);
--	/*
--	 * Unmask the IRQ in the interrupt controller.
--	 */
--	void (*unmask)(struct irq_controller *ctrl, unsigned int irq);
--	/*
--	 * Set the type of the IRQ. See below for possible types.
--	 * Return -EINVAL if a given type is not supported
--	 */
--	int (*set_type)(struct irq_controller *ctrl, unsigned int irq,
--			unsigned int type);
--	/*
--	 * Return the IRQ type currently set
--	 */
--	unsigned int (*get_type)(struct irq_controller *ctrl, unsigned int irq);
--};
--
--struct irq_controller {
--	struct irq_controller_class *class;
--	unsigned int irq_group;
--	unsigned int first_irq;
--	unsigned int nr_irqs;
--	struct list_head list;
--};
--
--struct intc_group_desc {
--	struct irq_controller *ctrl;
--	irqreturn_t (*handle)(int, void *, struct pt_regs *);
--	unsigned long flags;
--	void *dev_id;
--	const char *devname;
--};
--
--/*
-- * The internal interrupt controller.  Defined in board/part-specific
-- * devices.c.
-- * TODO: Should probably be defined per-cpu.
-- */
--extern struct intc_device intc;
--
--extern int request_internal_irq(unsigned int irq,
--				irqreturn_t (*handler)(int, void *, struct pt_regs *),
--				unsigned long irqflags,
--				const char *devname, void *dev_id);
--extern void free_internal_irq(unsigned int irq);
--
--/* Only used by time_init() */
--extern int setup_internal_irq(unsigned int irq, struct intc_group_desc *desc);
--
--/*
-- * Set interrupt priority for a given group. `group' can be found by
-- * using irq_to_group(irq). Priority can be from 0 (lowest) to 3
-- * (highest). Higher-priority interrupts will preempt lower-priority
-- * interrupts (unless interrupts are masked globally).
-- *
-- * This function does not check for conflicts within a group.
-- */
--extern int intc_set_priority(unsigned int group,
--			     unsigned int priority);
--
--/*
-- * Returns a bitmask of pending interrupts in a group.
-- */
--extern unsigned long intc_get_pending(unsigned int group);
--
--/*
-- * Register a new external interrupt controller.  Returns the first
-- * external IRQ number that is assigned to the new controller.
-- */
--extern int intc_register_controller(struct irq_controller *ctrl);
--
--#endif /* __ASM_AVR32_INTC_H */
---- a/include/asm-avr32/irq.h
-+++ b/include/asm-avr32/irq.h
-@@ -14,6 +14,11 @@
- #ifndef __ASSEMBLER__
- int nmi_enable(void);
- void nmi_disable(void);
-+
-+/*
-+ * Returns a bitmask of pending interrupts in a group.
-+ */
-+extern unsigned long intc_get_pending(unsigned int group);
- #endif
- 
- #endif /* __ASM_AVR32_IOCTLS_H */
---- a/include/asm-avr32/mmu_context.h
-+++ b/include/asm-avr32/mmu_context.h
-@@ -13,7 +13,6 @@
- #define __ASM_AVR32_MMU_CONTEXT_H
- 
- #include <asm/tlbflush.h>
--#include <asm/pgalloc.h>
- #include <asm/sysreg.h>
- #include <asm-generic/mm_hooks.h>
- 
---- a/include/asm-avr32/page.h
-+++ b/include/asm-avr32/page.h
-@@ -8,13 +8,11 @@
- #ifndef __ASM_AVR32_PAGE_H
- #define __ASM_AVR32_PAGE_H
- 
-+#include <linux/const.h>
-+
- /* PAGE_SHIFT determines the page size */
- #define PAGE_SHIFT	12
--#ifdef __ASSEMBLY__
--#define PAGE_SIZE	(1 << PAGE_SHIFT)
--#else
--#define PAGE_SIZE	(1UL << PAGE_SHIFT)
--#endif
-+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
- #define PAGE_MASK	(~(PAGE_SIZE-1))
- #define PTE_MASK	PAGE_MASK
- 
---- a/include/asm-avr32/pci.h
-+++ b/include/asm-avr32/pci.h
-@@ -5,4 +5,6 @@
- 
- #define PCI_DMA_BUS_IS_PHYS	(1)
- 
-+#include <asm-generic/pci-dma-compat.h>
-+
- #endif /* __ASM_AVR32_PCI_H__ */
---- a/include/asm-avr32/pgalloc.h
-+++ b/include/asm-avr32/pgalloc.h
-@@ -8,65 +8,79 @@
- #ifndef __ASM_AVR32_PGALLOC_H
- #define __ASM_AVR32_PGALLOC_H
- 
--#include <asm/processor.h>
--#include <linux/threads.h>
--#include <linux/slab.h>
--#include <linux/mm.h>
-+#include <linux/quicklist.h>
-+#include <asm/page.h>
-+#include <asm/pgtable.h>
- 
--#define pmd_populate_kernel(mm, pmd, pte) \
--	set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
-+#define QUICK_PGD	0	/* Preserve kernel mappings over free */
-+#define QUICK_PT	1	/* Zero on free */
- 
--static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
-+static inline void pmd_populate_kernel(struct mm_struct *mm,
-+				       pmd_t *pmd, pte_t *pte)
-+{
-+	set_pmd(pmd, __pmd((unsigned long)pte));
-+}
-+
-+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- 				    pgtable_t pte)
- {
--	set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
-+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
- }
- #define pmd_pgtable(pmd) pmd_page(pmd)
- 
-+static inline void pgd_ctor(void *x)
-+{
-+	pgd_t *pgd = x;
-+
-+	memcpy(pgd + USER_PTRS_PER_PGD,
-+		swapper_pg_dir + USER_PTRS_PER_PGD,
-+		(PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-+}
-+
- /*
-  * Allocate and free page tables
-  */
--static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
-+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
- {
--	return kcalloc(USER_PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL);
-+	return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
- }
- 
- static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
- {
--	kfree(pgd);
-+	quicklist_free(QUICK_PGD, NULL, pgd);
- }
- 
- static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
- 					  unsigned long address)
- {
--	pte_t *pte;
--
--	pte = (pte_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
--
--	return pte;
-+	return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
- }
- 
--static inline struct page *pte_alloc_one(struct mm_struct *mm,
-+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
- 					 unsigned long address)
- {
--	struct page *pte;
-+	struct page *page;
-+	void *pg;
- 
--	pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
--	if (!pte)
-+	pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
-+	if (!pg)
- 		return NULL;
--	pgtable_page_ctor(pte);
--	return pte;
-+
-+	page = virt_to_page(pg);
-+	pgtable_page_ctor(page);
-+
-+	return page;
- }
- 
- static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
- {
--	free_page((unsigned long)pte);
-+	quicklist_free(QUICK_PT, NULL, pte);
- }
- 
- static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
- {
- 	pgtable_page_dtor(pte);
--	__free_page(pte);
-+	quicklist_free_page(QUICK_PT, NULL, pte);
- }
- 
- #define __pte_free_tlb(tlb,pte)				\
-@@ -75,6 +89,10 @@ do {							\
- 	tlb_remove_page((tlb), pte);			\
- } while (0)
- 
--#define check_pgt_cache() do { } while(0)
-+static inline void check_pgt_cache(void)
-+{
-+	quicklist_trim(QUICK_PGD, NULL, 25, 16);
-+	quicklist_trim(QUICK_PT, NULL, 25, 16);
-+}
- 
- #endif /* __ASM_AVR32_PGALLOC_H */
---- a/include/asm-avr32/pgtable.h
-+++ b/include/asm-avr32/pgtable.h
-@@ -129,13 +129,6 @@ extern struct page *empty_zero_page;
- 
- #define _PAGE_FLAGS_CACHE_MASK	(_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
- 
--/* TODO: Check for saneness */
--/* User-mode page table flags (to be set in a pgd or pmd entry) */
--#define _PAGE_TABLE		(_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
--				 | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
--/* Kernel-mode page table flags */
--#define _KERNPG_TABLE		(_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
--				 | _PAGE_ACCESSED | _PAGE_DIRTY)
- /* Flags that may be modified by software */
- #define _PAGE_CHG_MASK		(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
- 				 | _PAGE_FLAGS_CACHE_MASK)
-@@ -254,10 +247,14 @@ static inline pte_t pte_mkyoung(pte_t pt
- }
- 
- #define pmd_none(x)	(!pmd_val(x))
--#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
--#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
--#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER))	\
--			 != _KERNPG_TABLE)
-+#define pmd_present(x)	(pmd_val(x))
-+
-+static inline void pmd_clear(pmd_t *pmdp)
-+{
-+	set_pmd(pmdp, __pmd(0));
-+}
-+
-+#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
- 
- /*
-  * Permanent address of a page. We don't support highmem, so this is
-@@ -295,19 +292,16 @@ static inline pte_t pte_modify(pte_t pte
- 
- #define page_pte(page)	page_pte_prot(page, __pgprot(0))
- 
--#define pmd_page_vaddr(pmd)					\
--	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
--
--#define pmd_page(pmd)	(phys_to_page(pmd_val(pmd)))
-+#define pmd_page_vaddr(pmd)	pmd_val(pmd)
-+#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
- 
- /* to find an entry in a page-table-directory. */
--#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
--#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
--#define pgd_offset_current(address)				\
--	((pgd_t *)__mfsr(SYSREG_PTBR) + pgd_index(address))
-+#define pgd_index(address)	(((address) >> PGDIR_SHIFT)	\
-+				 & (PTRS_PER_PGD - 1))
-+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
- 
- /* to find an entry in a kernel page-table-directory */
--#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
- 
- /* Find an entry in the third-level page table.. */
- #define pte_index(address)				\
---- /dev/null
-+++ b/include/asm-avr32/serial.h
-@@ -0,0 +1,13 @@
-+#ifndef _ASM_SERIAL_H
-+#define _ASM_SERIAL_H
-+
-+/*
-+ * This assumes you have a 1.8432 MHz clock for your UART.
-+ *
-+ * It'd be nice if someone built a serial card with a 24.576 MHz
-+ * clock, since the 16550A is capable of handling a top speed of 1.5
-+ * megabits/second; but this requires the faster clock.
-+ */
-+#define BASE_BAUD (1843200 / 16)
-+
-+#endif /* _ASM_SERIAL_H */
---- a/include/asm-avr32/thread_info.h
-+++ b/include/asm-avr32/thread_info.h
-@@ -88,6 +88,7 @@ static inline struct thread_info *curren
- #define TIF_MEMDIE		6
- #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
- #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
-+#define TIF_FREEZE		29
- #define TIF_DEBUG		30	/* debugging enabled */
- #define TIF_USERSPACE		31      /* true if FS sets userspace */
- 
---- a/include/asm-avr32/tlbflush.h
-+++ b/include/asm-avr32/tlbflush.h
-@@ -26,7 +26,6 @@ extern void flush_tlb_mm(struct mm_struc
- extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- 			    unsigned long end);
- extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
--extern void __flush_tlb_page(unsigned long asid, unsigned long page);
- 
- extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
- 
---- /dev/null
-+++ b/include/asm-avr32/xor.h
-@@ -0,0 +1,6 @@
-+#ifndef _ASM_XOR_H
-+#define _ASM_XOR_H
-+
-+#include <asm-generic/xor.h>
-+
-+#endif
---- /dev/null
-+++ b/include/linux/atmel_tc.h
-@@ -0,0 +1,252 @@
-+/*
-+ * Timer/Counter Unit (TC) registers.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef ATMEL_TC_H
-+#define ATMEL_TC_H
-+
-+#include <linux/compiler.h>
-+#include <linux/list.h>
-+
-+/*
-+ * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
-+ * three general-purpose 16-bit timers.  These timers share one register bank.
-+ * Depending on the SOC, each timer may have its own clock and IRQ, or those
-+ * may be shared by the whole TC block.
-+ *
-+ * These TC blocks may have up to nine external pins:  TCLK0..2 signals for
-+ * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
-+ * or triggering.  Those pins need to be set up for use with the TC block,
-+ * else they will be used as GPIOs or for a different controller.
-+ *
-+ * Although we expect each TC block to have a platform_device node, those
-+ * nodes are not what drivers bind to.  Instead, they ask for a specific
-+ * TC block, by number ... which is a common approach on systems with many
-+ * timers.  Then they use clk_get() and platform_get_irq() to get clock and
-+ * IRQ resources.
-+ */
-+
-+struct clk;
-+
-+/**
-+ * struct atmel_tc - information about a Timer/Counter Block
-+ * @pdev: physical device
-+ * @iomem: resource associated with the I/O register
-+ * @regs: mapping through which the I/O registers can be accessed
-+ * @irq: irq for each of the three channels
-+ * @clk: internal clock source for each of the three channels
-+ * @node: list node, for tclib internal use
-+ *
-+ * On some platforms, each TC channel has its own clocks and IRQs,
-+ * while on others, all TC channels share the same clock and IRQ.
-+ * Drivers should clk_enable() all the clocks they need even though
-+ * all the entries in @clk may point to the same physical clock.
-+ * Likewise, drivers should request irqs independently for each
-+ * channel, but they must use IRQF_SHARED in case some of the entries
-+ * in @irq are actually the same IRQ.
-+ */
-+struct atmel_tc {
-+	struct platform_device	*pdev;
-+	struct resource		*iomem;
-+	void __iomem		*regs;
-+	int			irq[3];
-+	struct clk		*clk[3];
-+	struct list_head	node;
-+};
-+
-+extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
-+extern void atmel_tc_free(struct atmel_tc *tc);
-+
-+/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
-+extern const u8 atmel_tc_divisors[5];
-+
-+
-+/*
-+ * Two registers have block-wide controls.  These are: configuring the three
-+ * "external" clocks (or event sources) used by the timer channels; and
-+ * synchronizing the timers by resetting them all at once.
-+ *
-+ * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
-+ * signals.  Or, it can mean "external to timer", using the TIOA output from
-+ * one of the other two timers that's being run in waveform mode.
-+ */
-+
-+#define ATMEL_TC_BCR	0xc0		/* TC Block Control Register */
-+#define     ATMEL_TC_SYNC	(1 << 0)	/* synchronize timers */
-+
-+#define ATMEL_TC_BMR	0xc4		/* TC Block Mode Register */
-+#define     ATMEL_TC_TC0XC0S	(3 << 0)	/* external clock 0 source */
-+#define        ATMEL_TC_TC0XC0S_TCLK0	(0 << 0)
-+#define        ATMEL_TC_TC0XC0S_NONE	(1 << 0)
-+#define        ATMEL_TC_TC0XC0S_TIOA1	(2 << 0)
-+#define        ATMEL_TC_TC0XC0S_TIOA2	(3 << 0)
-+#define     ATMEL_TC_TC1XC1S	(3 << 2)	/* external clock 1 source */
-+#define        ATMEL_TC_TC1XC1S_TCLK1	(0 << 2)
-+#define        ATMEL_TC_TC1XC1S_NONE	(1 << 2)
-+#define        ATMEL_TC_TC1XC1S_TIOA0	(2 << 2)
-+#define        ATMEL_TC_TC1XC1S_TIOA2	(3 << 2)
-+#define     ATMEL_TC_TC2XC2S	(3 << 4)	/* external clock 2 source */
-+#define        ATMEL_TC_TC2XC2S_TCLK2	(0 << 4)
-+#define        ATMEL_TC_TC2XC2S_NONE	(1 << 4)
-+#define        ATMEL_TC_TC2XC2S_TIOA0	(2 << 4)
-+#define        ATMEL_TC_TC2XC2S_TIOA1	(3 << 4)
-+
-+
-+/*
-+ * Each TC block has three "channels", each with one counter and controls.
-+ *
-+ * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
-+ * when it's not "external") is silicon-specific.  AT91 platforms use one
-+ * set of definitions; AVR32 platforms use a different set.  Don't hard-wire
-+ * such knowledge into your code, use the global "atmel_tc_divisors" ...
-+ * where index N is the divisor for clock N+1, else zero to indicate it uses
-+ * the 32 KiHz clock.
-+ *
-+ * The timers can be chained in various ways, and operated in "waveform"
-+ * generation mode (including PWM) or "capture" mode (to time events).  In
-+ * both modes, behavior can be configured in many ways.
-+ *
-+ * Each timer has two I/O pins, TIOA and TIOB.  Waveform mode uses TIOA as a
-+ * PWM output, and TIOB as either another PWM or as a trigger.  Capture mode
-+ * uses them only as inputs.
-+ */
-+#define ATMEL_TC_CHAN(idx)	((idx)*0x40)
-+#define ATMEL_TC_REG(idx, reg)	(ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
-+
-+#define ATMEL_TC_CCR	0x00		/* Channel Control Register */
-+#define     ATMEL_TC_CLKEN	(1 << 0)	/* clock enable */
-+#define     ATMEL_TC_CLKDIS	(1 << 1)	/* clock disable */
-+#define     ATMEL_TC_SWTRG	(1 << 2)	/* software trigger */
-+
-+#define ATMEL_TC_CMR	0x04		/* Channel Mode Register */
-+
-+/* Both modes share some CMR bits */
-+#define     ATMEL_TC_TCCLKS	(7 << 0)	/* clock source */
-+#define        ATMEL_TC_TIMER_CLOCK1	(0 << 0)
-+#define        ATMEL_TC_TIMER_CLOCK2	(1 << 0)
-+#define        ATMEL_TC_TIMER_CLOCK3	(2 << 0)
-+#define        ATMEL_TC_TIMER_CLOCK4	(3 << 0)
-+#define        ATMEL_TC_TIMER_CLOCK5	(4 << 0)
-+#define        ATMEL_TC_XC0		(5 << 0)
-+#define        ATMEL_TC_XC1		(6 << 0)
-+#define        ATMEL_TC_XC2		(7 << 0)
-+#define     ATMEL_TC_CLKI	(1 << 3)	/* clock invert */
-+#define     ATMEL_TC_BURST	(3 << 4)	/* clock gating */
-+#define        ATMEL_TC_GATE_NONE	(0 << 4)
-+#define        ATMEL_TC_GATE_XC0	(1 << 4)
-+#define        ATMEL_TC_GATE_XC1	(2 << 4)
-+#define        ATMEL_TC_GATE_XC2	(3 << 4)
-+#define     ATMEL_TC_WAVE	(1 << 15)	/* true = Waveform mode */
-+
-+/* CAPTURE mode CMR bits */
-+#define     ATMEL_TC_LDBSTOP	(1 << 6)	/* counter stops on RB load */
-+#define     ATMEL_TC_LDBDIS	(1 << 7)	/* counter disable on RB load */
-+#define     ATMEL_TC_ETRGEDG	(3 << 8)	/* external trigger edge */
-+#define        ATMEL_TC_ETRGEDG_NONE	(0 << 8)
-+#define        ATMEL_TC_ETRGEDG_RISING	(1 << 8)
-+#define        ATMEL_TC_ETRGEDG_FALLING	(2 << 8)
-+#define        ATMEL_TC_ETRGEDG_BOTH	(3 << 8)
-+#define     ATMEL_TC_ABETRG	(1 << 10)	/* external trigger is TIOA? */
-+#define     ATMEL_TC_CPCTRG	(1 << 14)	/* RC compare trigger enable */
-+#define     ATMEL_TC_LDRA	(3 << 16)	/* RA loading edge (of TIOA) */
-+#define        ATMEL_TC_LDRA_NONE	(0 << 16)
-+#define        ATMEL_TC_LDRA_RISING	(1 << 16)
-+#define        ATMEL_TC_LDRA_FALLING	(2 << 16)
-+#define        ATMEL_TC_LDRA_BOTH	(3 << 16)
-+#define     ATMEL_TC_LDRB	(3 << 18)	/* RB loading edge (of TIOA) */
-+#define        ATMEL_TC_LDRB_NONE	(0 << 18)
-+#define        ATMEL_TC_LDRB_RISING	(1 << 18)
-+#define        ATMEL_TC_LDRB_FALLING	(2 << 18)
-+#define        ATMEL_TC_LDRB_BOTH	(3 << 18)
-+
-+/* WAVEFORM mode CMR bits */
-+#define     ATMEL_TC_CPCSTOP	(1 <<  6)	/* RC compare stops counter */
-+#define     ATMEL_TC_CPCDIS	(1 <<  7)	/* RC compare disables counter */
-+#define     ATMEL_TC_EEVTEDG	(3 <<  8)	/* external event edge */
-+#define        ATMEL_TC_EEVTEDG_NONE	(0 << 8)
-+#define        ATMEL_TC_EEVTEDG_RISING	(1 << 8)
-+#define        ATMEL_TC_EEVTEDG_FALLING	(2 << 8)
-+#define        ATMEL_TC_EEVTEDG_BOTH	(3 << 8)
-+#define     ATMEL_TC_EEVT	(3 << 10)	/* external event source */
-+#define        ATMEL_TC_EEVT_TIOB	(0 << 10)
-+#define        ATMEL_TC_EEVT_XC0	(1 << 10)
-+#define        ATMEL_TC_EEVT_XC1	(2 << 10)
-+#define        ATMEL_TC_EEVT_XC2	(3 << 10)
-+#define     ATMEL_TC_ENETRG	(1 << 12)	/* external event is trigger */
-+#define     ATMEL_TC_WAVESEL	(3 << 13)	/* waveform type */
-+#define        ATMEL_TC_WAVESEL_UP	(0 << 13)
-+#define        ATMEL_TC_WAVESEL_UPDOWN	(1 << 13)
-+#define        ATMEL_TC_WAVESEL_UP_AUTO	(2 << 13)
-+#define        ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
-+#define     ATMEL_TC_ACPA	(3 << 16)	/* RA compare changes TIOA */
-+#define        ATMEL_TC_ACPA_NONE	(0 << 16)
-+#define        ATMEL_TC_ACPA_SET	(1 << 16)
-+#define        ATMEL_TC_ACPA_CLEAR	(2 << 16)
-+#define        ATMEL_TC_ACPA_TOGGLE	(3 << 16)
-+#define     ATMEL_TC_ACPC	(3 << 18)	/* RC compare changes TIOA */
-+#define        ATMEL_TC_ACPC_NONE	(0 << 18)
-+#define        ATMEL_TC_ACPC_SET	(1 << 18)
-+#define        ATMEL_TC_ACPC_CLEAR	(2 << 18)
-+#define        ATMEL_TC_ACPC_TOGGLE	(3 << 18)
-+#define     ATMEL_TC_AEEVT	(3 << 20)	/* external event changes TIOA */
-+#define        ATMEL_TC_AEEVT_NONE	(0 << 20)
-+#define        ATMEL_TC_AEEVT_SET	(1 << 20)
-+#define        ATMEL_TC_AEEVT_CLEAR	(2 << 20)
-+#define        ATMEL_TC_AEEVT_TOGGLE	(3 << 20)
-+#define     ATMEL_TC_ASWTRG	(3 << 22)	/* software trigger changes TIOA */
-+#define        ATMEL_TC_ASWTRG_NONE	(0 << 22)
-+#define        ATMEL_TC_ASWTRG_SET	(1 << 22)
-+#define        ATMEL_TC_ASWTRG_CLEAR	(2 << 22)
-+#define        ATMEL_TC_ASWTRG_TOGGLE	(3 << 22)
-+#define     ATMEL_TC_BCPB	(3 << 24)	/* RB compare changes TIOB */
-+#define        ATMEL_TC_BCPB_NONE	(0 << 24)
-+#define        ATMEL_TC_BCPB_SET	(1 << 24)
-+#define        ATMEL_TC_BCPB_CLEAR	(2 << 24)
-+#define        ATMEL_TC_BCPB_TOGGLE	(3 << 24)
-+#define     ATMEL_TC_BCPC	(3 << 26)	/* RC compare changes TIOB */
-+#define        ATMEL_TC_BCPC_NONE	(0 << 26)
-+#define        ATMEL_TC_BCPC_SET	(1 << 26)
-+#define        ATMEL_TC_BCPC_CLEAR	(2 << 26)
-+#define        ATMEL_TC_BCPC_TOGGLE	(3 << 26)
-+#define     ATMEL_TC_BEEVT	(3 << 28)	/* external event changes TIOB */
-+#define        ATMEL_TC_BEEVT_NONE	(0 << 28)
-+#define        ATMEL_TC_BEEVT_SET	(1 << 28)
-+#define        ATMEL_TC_BEEVT_CLEAR	(2 << 28)
-+#define        ATMEL_TC_BEEVT_TOGGLE	(3 << 28)
-+#define     ATMEL_TC_BSWTRG	(3 << 30)	/* software trigger changes TIOB */
-+#define        ATMEL_TC_BSWTRG_NONE	(0 << 30)
-+#define        ATMEL_TC_BSWTRG_SET	(1 << 30)
-+#define        ATMEL_TC_BSWTRG_CLEAR	(2 << 30)
-+#define        ATMEL_TC_BSWTRG_TOGGLE	(3 << 30)
-+
-+#define ATMEL_TC_CV	0x10		/* counter Value */
-+#define ATMEL_TC_RA	0x14		/* register A */
-+#define ATMEL_TC_RB	0x18		/* register B */
-+#define ATMEL_TC_RC	0x1c		/* register C */
-+
-+#define ATMEL_TC_SR	0x20		/* status (read-only) */
-+/* Status-only flags */
-+#define     ATMEL_TC_CLKSTA	(1 << 16)	/* clock enabled */
-+#define     ATMEL_TC_MTIOA	(1 << 17)	/* TIOA mirror */
-+#define     ATMEL_TC_MTIOB	(1 << 18)	/* TIOB mirror */
-+
-+#define ATMEL_TC_IER	0x24		/* interrupt enable (write-only) */
-+#define ATMEL_TC_IDR	0x28		/* interrupt disable (write-only) */
-+#define ATMEL_TC_IMR	0x2c		/* interrupt mask (read-only) */
-+
-+/* Status and IRQ flags */
-+#define     ATMEL_TC_COVFS	(1 <<  0)	/* counter overflow */
-+#define     ATMEL_TC_LOVRS	(1 <<  1)	/* load overrun */
-+#define     ATMEL_TC_CPAS	(1 <<  2)	/* RA compare */
-+#define     ATMEL_TC_CPBS	(1 <<  3)	/* RB compare */
-+#define     ATMEL_TC_CPCS	(1 <<  4)	/* RC compare */
-+#define     ATMEL_TC_LDRAS	(1 <<  5)	/* RA loading */
-+#define     ATMEL_TC_LDRBS	(1 <<  6)	/* RB loading */
-+#define     ATMEL_TC_ETRGS	(1 <<  7)	/* external trigger */
-+
-+#endif
---- a/include/linux/fs.h
-+++ b/include/linux/fs.h
-@@ -1692,6 +1692,8 @@ static inline void invalidate_remote_ino
- extern int invalidate_inode_pages2(struct address_space *mapping);
- extern int invalidate_inode_pages2_range(struct address_space *mapping,
- 					 pgoff_t start, pgoff_t end);
-+extern void generic_sync_sb_inodes(struct super_block *sb,
-+				struct writeback_control *wbc);
- extern int write_inode_now(struct inode *, int);
- extern int filemap_fdatawrite(struct address_space *);
- extern int filemap_flush(struct address_space *);
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -188,6 +188,7 @@ struct uart_ops {
- 	void		(*break_ctl)(struct uart_port *, int ctl);
- 	int		(*startup)(struct uart_port *);
- 	void		(*shutdown)(struct uart_port *);
-+	void		(*flush_buffer)(struct uart_port *);
- 	void		(*set_termios)(struct uart_port *, struct ktermios *new,
- 				       struct ktermios *old);
- 	void		(*pm)(struct uart_port *, unsigned int state,
---- /dev/null
-+++ b/include/linux/usb/atmel_usba_udc.h
-@@ -0,0 +1,22 @@
-+/*
-+ * Platform data definitions for Atmel USBA gadget driver.
-+ */
-+#ifndef __LINUX_USB_USBA_H
-+#define __LINUX_USB_USBA_H
-+
-+struct usba_ep_data {
-+	char	*name;
-+	int	index;
-+	int	fifo_size;
-+	int	nr_banks;
-+	int	can_dma;
-+	int	can_isoc;
-+};
-+
-+struct usba_platform_data {
-+	int			vbus_pin;
-+	int			num_ep;
-+	struct usba_ep_data	ep[0];
-+};
-+
-+#endif /* __LINUX_USB_USBA_H */
---- a/mm/Kconfig
-+++ b/mm/Kconfig
-@@ -187,7 +187,7 @@ config BOUNCE
- config NR_QUICK
- 	int
- 	depends on QUICKLIST
--	default "2" if SUPERH
-+	default "2" if SUPERH || AVR32
- 	default "1"
- 
- config VIRT_TO_BUS
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
- 
- source "sound/arm/Kconfig"
- 
-+source "sound/avr32/Kconfig"
-+
- if SPI
- source "sound/spi/Kconfig"
- endif
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
- obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
--	sparc/ spi/ parisc/ pcmcia/ mips/ soc/
-+	sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
- obj-$(CONFIG_SND_AOA) += aoa/
- 
- # This one must be compilable even if sound is configured out
---- /dev/null
-+++ b/sound/avr32/Kconfig
-@@ -0,0 +1,11 @@
-+menu "AVR32 devices"
-+	depends on SND != n && AVR32
-+
-+config SND_ATMEL_AC97
-+	tristate "Atmel AC97 Controller Driver"
-+	select SND_PCM
-+	select SND_AC97_CODEC
-+	help
-+	  ALSA sound driver for the Atmel AC97 controller.
-+
-+endmenu
---- /dev/null
-+++ b/sound/avr32/Makefile
-@@ -0,0 +1,3 @@
-+snd-atmel-ac97-objs		:= ac97c.o
-+
-+obj-$(CONFIG_SND_ATMEL_AC97)	+= snd-atmel-ac97.o
---- /dev/null
-+++ b/sound/avr32/ac97c.c
-@@ -0,0 +1,951 @@
-+/*
-+ * Driver for the Atmel AC97 controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/gpio.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+#include <linux/io.h>
-+
-+#include <sound/core.h>
-+#include <sound/initval.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/memalloc.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/dma-controller.h>
-+
-+#include "ac97c.h"
-+
-+/* Serialize access to opened */
-+static DEFINE_MUTEX(opened_mutex);
-+
-+struct atmel_ac97_dma_info {
-+	struct dma_request_cyclic req_tx;
-+	struct dma_request_cyclic req_rx;
-+	unsigned short rx_periph_id;
-+	unsigned short tx_periph_id;
-+	unsigned short controller;
-+};
-+
-+struct atmel_ac97 {
-+	/* Serialize access to opened */
-+	spinlock_t lock;
-+	void __iomem *regs;
-+	struct snd_pcm_substream *playback_substream;
-+	struct snd_pcm_substream *capture_substream;
-+	struct snd_card *card;
-+	struct snd_pcm *pcm;
-+	struct snd_ac97 *ac97;
-+	struct snd_ac97_bus *ac97_bus;
-+	int opened;
-+	int period;
-+	int reset_pin;
-+	u64 cur_format;
-+	unsigned int cur_rate;
-+	struct clk *mck;
-+	struct platform_device *pdev;
-+	struct atmel_ac97_dma_info dma;
-+};
-+
-+#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
-+
-+#define ac97c_writel(chip, reg, val)			\
-+	__raw_writel((val), (chip)->regs + AC97C_##reg)
-+#define ac97c_readl(chip, reg)				\
-+	__raw_readl((chip)->regs + AC97C_##reg)
-+
-+/*
-+ * PCM part
-+ */
-+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
-+	.info			= (SNDRV_PCM_INFO_INTERLEAVED
-+				  | SNDRV_PCM_INFO_MMAP
-+				  | SNDRV_PCM_INFO_MMAP_VALID
-+				  | SNDRV_PCM_INFO_BLOCK_TRANSFER
-+				  | SNDRV_PCM_INFO_JOINT_DUPLEX),
-+	.formats		= (SNDRV_PCM_FMTBIT_S16_BE
-+				  | SNDRV_PCM_FMTBIT_S16_LE),
-+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
-+	.rate_min		= 4000,
-+	.rate_max		= 48000,
-+	.channels_min		= 1,
-+	.channels_max		= 6,
-+	.buffer_bytes_max	= 64*1024,
-+	.period_bytes_min	= 512,
-+	.period_bytes_max	= 4095,
-+	.periods_min		= 8,
-+	.periods_max		= 1024,
-+};
-+
-+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
-+	.info			= (SNDRV_PCM_INFO_INTERLEAVED
-+				  | SNDRV_PCM_INFO_MMAP
-+				  | SNDRV_PCM_INFO_MMAP_VALID
-+				  | SNDRV_PCM_INFO_BLOCK_TRANSFER
-+				  | SNDRV_PCM_INFO_JOINT_DUPLEX),
-+	.formats		= (SNDRV_PCM_FMTBIT_S16_BE
-+				  | SNDRV_PCM_FMTBIT_S16_LE),
-+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
-+	.rate_min		= 4000,
-+	.rate_max		= 48000,
-+	.channels_min		= 1,
-+	.channels_max		= 2,
-+	.buffer_bytes_max	= 64*1024,
-+	.period_bytes_min	= 512,
-+	.period_bytes_max	= 4095,
-+	.periods_min		= 8,
-+	.periods_max		= 1024,
-+};
-+
-+/*
-+ * PCM functions
-+ */
-+static int
-+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	mutex_lock(&opened_mutex);
-+	chip->opened++;
-+	runtime->hw = snd_atmel_ac97_playback_hw;
-+	if (chip->cur_rate) {
-+		runtime->hw.rate_min = chip->cur_rate;
-+		runtime->hw.rate_max = chip->cur_rate;
-+	}
-+	if (chip->cur_format)
-+		runtime->hw.formats = (1ULL << chip->cur_format);
-+	mutex_unlock(&opened_mutex);
-+	chip->playback_substream = substream;
-+	chip->period = 0;
-+	return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	mutex_lock(&opened_mutex);
-+	chip->opened++;
-+	runtime->hw = snd_atmel_ac97_capture_hw;
-+	if (chip->cur_rate) {
-+		runtime->hw.rate_min = chip->cur_rate;
-+		runtime->hw.rate_max = chip->cur_rate;
-+	}
-+	if (chip->cur_format)
-+		runtime->hw.formats = (1ULL << chip->cur_format);
-+	mutex_unlock(&opened_mutex);
-+	chip->capture_substream = substream;
-+	chip->period = 0;
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	mutex_lock(&opened_mutex);
-+	chip->opened--;
-+	if (!chip->opened) {
-+		chip->cur_rate = 0;
-+		chip->cur_format = 0;
-+	}
-+	mutex_unlock(&opened_mutex);
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	mutex_lock(&opened_mutex);
-+	chip->opened--;
-+	if (!chip->opened) {
-+		chip->cur_rate = 0;
-+		chip->cur_format = 0;
-+	}
-+	mutex_unlock(&opened_mutex);
-+	return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
-+		struct snd_pcm_hw_params *hw_params)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	int err;
-+
-+	err = snd_pcm_lib_malloc_pages(substream,
-+					params_buffer_bytes(hw_params));
-+	if (err < 0)
-+		return err;
-+
-+	/* Set restrictions to params */
-+	mutex_lock(&opened_mutex);
-+	chip->cur_rate = params_rate(hw_params);
-+	chip->cur_format = params_format(hw_params);
-+	mutex_unlock(&opened_mutex);
-+
-+	return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
-+		struct snd_pcm_hw_params *hw_params)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	int err;
-+
-+	err = snd_pcm_lib_malloc_pages(substream,
-+					params_buffer_bytes(hw_params));
-+	if (err < 0)
-+		return err;
-+
-+	/* Set restrictions to params */
-+	mutex_lock(&opened_mutex);
-+	chip->cur_rate = params_rate(hw_params);
-+	chip->cur_format = params_format(hw_params);
-+	mutex_unlock(&opened_mutex);
-+
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
-+{
-+	return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
-+{
-+
-+	return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	struct platform_device *pdev = chip->pdev;
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	int block_size = frames_to_bytes(runtime, runtime->period_size);
-+	unsigned long word = 0;
-+	unsigned long buffer_size = 0;
-+
-+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+			block_size * 2, DMA_TO_DEVICE);
-+
-+	/* Assign slots to channels */
-+	switch (substream->runtime->channels) {
-+	case 1:
-+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+		break;
-+	case 2:
-+		/* Assign Left and Right slot to Channel A */
-+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+		break;
-+	default:
-+		/* TODO: support more than two channels */
-+		return -EINVAL;
-+		break;
-+	}
-+	ac97c_writel(chip, OCA, word);
-+
-+	/* Configure sample format and size */
-+	word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+	switch (runtime->format) {
-+	case SNDRV_PCM_FORMAT_S16_LE:
-+		word |= AC97C_CMR_CEM_LITTLE;
-+		break;
-+	case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
-+	default:
-+		word &= ~AC97C_CMR_CEM_LITTLE;
-+		break;
-+	}
-+
-+	ac97c_writel(chip, CAMR, word);
-+
-+	/* Set variable rate if needed */
-+	if (runtime->rate != 48000) {
-+		word = ac97c_readl(chip, MR);
-+		word |= AC97C_MR_VRA;
-+		ac97c_writel(chip, MR, word);
-+	} else {
-+		/* Clear Variable Rate Bit */
-+		word = ac97c_readl(chip, MR);
-+		word &= ~AC97C_MR_VRA;
-+		ac97c_writel(chip, MR, word);
-+	}
-+
-+	/* Set rate */
-+	snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
-+
-+	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+		runtime->periods;
-+
-+	chip->dma.req_tx.buffer_size = buffer_size;
-+	chip->dma.req_tx.periods = runtime->periods;
-+
-+	BUG_ON(chip->dma.req_tx.buffer_size !=
-+			(chip->dma.req_tx.periods *
-+			 frames_to_bytes(runtime, runtime->period_size)));
-+
-+	chip->dma.req_tx.buffer_start = runtime->dma_addr;
-+	chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
-+	chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
-+	chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
-+	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+	chip->dma.req_tx.dev_id = chip;
-+
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	struct platform_device *pdev = chip->pdev;
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	int block_size = frames_to_bytes(runtime, runtime->period_size);
-+	unsigned long word = 0;
-+	unsigned long buffer_size = 0;
-+
-+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+			block_size * 2, DMA_FROM_DEVICE);
-+
-+	/* Assign slots to channels */
-+	switch (substream->runtime->channels) {
-+	case 1:
-+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+		break;
-+	case 2:
-+		/* Assign Left and Right slot to Channel A */
-+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+		break;
-+	default:
-+		/* TODO: support more than two channels */
-+		return -EINVAL;
-+		break;
-+	}
-+	ac97c_writel(chip, ICA, word);
-+
-+	/* Configure sample format and size */
-+	word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+	switch (runtime->format) {
-+	case SNDRV_PCM_FORMAT_S16_LE:
-+		word |= AC97C_CMR_CEM_LITTLE;
-+		break;
-+	case SNDRV_PCM_FORMAT_S16_BE:
-+	default:
-+		word &= ~(AC97C_CMR_CEM_LITTLE);
-+		break;
-+	}
-+
-+	ac97c_writel(chip, CAMR, word);
-+
-+	/* Set variable rate if needed */
-+	if (runtime->rate != 48000) {
-+		word = ac97c_readl(chip, MR);
-+		word |= AC97C_MR_VRA;
-+		ac97c_writel(chip, MR, word);
-+	} else {
-+		/* Clear Variable Rate Bit */
-+		word = ac97c_readl(chip, MR);
-+		word &= ~(AC97C_MR_VRA);
-+		ac97c_writel(chip, MR, word);
-+	}
-+
-+	/* Set rate */
-+	snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
-+
-+	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+		runtime->periods;
-+
-+	chip->dma.req_rx.buffer_size = buffer_size;
-+	chip->dma.req_rx.periods = runtime->periods;
-+
-+	BUG_ON(chip->dma.req_rx.buffer_size !=
-+			(chip->dma.req_rx.periods *
-+			 frames_to_bytes(runtime, runtime->period_size)));
-+
-+	chip->dma.req_rx.buffer_start = runtime->dma_addr;
-+	chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
-+	chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
-+	chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
-+	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+	chip->dma.req_rx.dev_id = chip;
-+
-+	return 0;
-+}
-+
-+	static int
-+snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	unsigned long camr;
-+	int flags, err = 0;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+	camr = ac97c_readl(chip, CAMR);
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+		err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
-+				&chip->dma.req_tx);
-+		dma_start_request(chip->dma.req_tx.req.dmac,
-+				chip->dma.req_tx.req.channel);
-+		camr |= AC97C_CMR_CENA;
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+		err = dma_stop_request(chip->dma.req_tx.req.dmac,
-+				chip->dma.req_tx.req.channel);
-+		if (chip->opened <= 1)
-+			camr &= ~AC97C_CMR_CENA;
-+		break;
-+	default:
-+		err = -EINVAL;
-+		break;
-+	}
-+
-+	ac97c_writel(chip, CAMR, camr);
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+	return err;
-+}
-+
-+	static int
-+snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	unsigned long camr;
-+	int flags, err = 0;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+	camr = ac97c_readl(chip, CAMR);
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+		err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
-+				&chip->dma.req_rx);
-+		dma_start_request(chip->dma.req_rx.req.dmac,
-+				chip->dma.req_rx.req.channel);
-+		camr |= AC97C_CMR_CENA;
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+		err = dma_stop_request(chip->dma.req_rx.req.dmac,
-+				chip->dma.req_rx.req.channel);
-+		mutex_lock(&opened_mutex);
-+		if (chip->opened <= 1)
-+			camr &= ~AC97C_CMR_CENA;
-+		mutex_unlock(&opened_mutex);
-+		break;
-+	default:
-+		err = -EINVAL;
-+		break;
-+	}
-+
-+	ac97c_writel(chip, CAMR, camr);
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+	return err;
-+}
-+
-+	static snd_pcm_uframes_t
-+snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	snd_pcm_uframes_t pos;
-+	unsigned long bytes;
-+
-+	bytes = (dma_get_current_pos
-+			(chip->dma.req_tx.req.dmac,
-+			 chip->dma.req_tx.req.channel) - runtime->dma_addr);
-+	pos = bytes_to_frames(runtime, bytes);
-+	if (pos >= runtime->buffer_size)
-+		pos -= runtime->buffer_size;
-+
-+	return pos;
-+}
-+
-+	static snd_pcm_uframes_t
-+snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
-+{
-+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	snd_pcm_uframes_t pos;
-+	unsigned long bytes;
-+
-+	bytes = (dma_get_current_pos
-+			(chip->dma.req_rx.req.dmac,
-+			 chip->dma.req_rx.req.channel)
-+			- runtime->dma_addr);
-+	pos = bytes_to_frames(runtime, bytes);
-+	if (pos >= runtime->buffer_size)
-+		pos -= runtime->buffer_size;
-+
-+
-+	return pos;
-+}
-+
-+static struct snd_pcm_ops atmel_ac97_playback_ops = {
-+	.open		= snd_atmel_ac97_playback_open,
-+	.close		= snd_atmel_ac97_playback_close,
-+	.ioctl		= snd_pcm_lib_ioctl,
-+	.hw_params	= snd_atmel_ac97_playback_hw_params,
-+	.hw_free	= snd_atmel_ac97_playback_hw_free,
-+	.prepare	= snd_atmel_ac97_playback_prepare,
-+	.trigger	= snd_atmel_ac97_playback_trigger,
-+	.pointer	= snd_atmel_ac97_playback_pointer,
-+};
-+
-+static struct snd_pcm_ops atmel_ac97_capture_ops = {
-+	.open		= snd_atmel_ac97_capture_open,
-+	.close		= snd_atmel_ac97_capture_close,
-+	.ioctl		= snd_pcm_lib_ioctl,
-+	.hw_params	= snd_atmel_ac97_capture_hw_params,
-+	.hw_free	= snd_atmel_ac97_capture_hw_free,
-+	.prepare	= snd_atmel_ac97_capture_prepare,
-+	.trigger	= snd_atmel_ac97_capture_trigger,
-+	.pointer	= snd_atmel_ac97_capture_pointer,
-+};
-+
-+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
-+	/* Playback */
-+	{
-+		.exclusive = 1,
-+		.r = { {
-+			.slots = ((1 << AC97_SLOT_PCM_LEFT)
-+					| (1 << AC97_SLOT_PCM_RIGHT)
-+					| (1 << AC97_SLOT_PCM_CENTER)
-+					| (1 << AC97_SLOT_PCM_SLEFT)
-+					| (1 << AC97_SLOT_PCM_SRIGHT)
-+					| (1 << AC97_SLOT_LFE)),
-+		} }
-+	},
-+	/* PCM in */
-+	{
-+		.stream = 1,
-+		.exclusive = 1,
-+		.r = { {
-+			.slots = ((1 << AC97_SLOT_PCM_LEFT)
-+					| (1 << AC97_SLOT_PCM_RIGHT)),
-+		} }
-+	},
-+	/* Mic in */
-+	{
-+		.stream = 1,
-+		.exclusive = 1,
-+		.r = { {
-+			.slots = (1<<AC97_SLOT_MIC),
-+		} }
-+	},
-+};
-+
-+static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
-+{
-+	struct snd_pcm *pcm;
-+	int err;
-+
-+	err = snd_ac97_pcm_assign(chip->ac97_bus,
-+			ARRAY_SIZE(atmel_ac97_pcm_defs),
-+			atmel_ac97_pcm_defs);
-+	if (err)
-+		return err;
-+
-+	err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
-+	if (err)
-+		return err;
-+
-+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
-+			&atmel_ac97_playback_ops);
-+
-+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
-+			&atmel_ac97_capture_ops);
-+
-+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
-+			&chip->pdev->dev,
-+			128 * 1024, 128 * 1024);
-+
-+	pcm->private_data = chip;
-+	pcm->info_flags = 0;
-+	strcpy(pcm->name, "Atmel-AC97");
-+	chip->pcm = pcm;
-+
-+	return 0;
-+}
-+
-+/*
-+ * Mixer part.
-+ */
-+static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
-+{
-+	int err;
-+	struct snd_ac97_template template;
-+
-+	memset(&template, 0, sizeof(template));
-+	template.private_data = chip;
-+	err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
-+
-+	return err;
-+}
-+
-+static void atmel_ac97_error(struct dma_request *_req)
-+{
-+	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+	struct atmel_ac97 *chip = req->dev_id;
-+
-+	dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
-+			req->req.channel);
-+}
-+
-+static void atmel_ac97_block_complete(struct dma_request *_req)
-+{
-+	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+	struct atmel_ac97 *chip = req->dev_id;
-+	if (req->periph_id == chip->dma.tx_periph_id)
-+		snd_pcm_period_elapsed(chip->playback_substream);
-+	else
-+		snd_pcm_period_elapsed(chip->capture_substream);
-+}
-+
-+/*
-+ * Codec part.
-+ */
-+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-+		unsigned short val)
-+{
-+	struct atmel_ac97 *chip = get_chip(ac97);
-+	unsigned long word;
-+	int timeout = 40;
-+
-+	word = (reg & 0x7f) << 16 | val;
-+
-+	do {
-+		if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
-+			ac97c_writel(chip, COTHR, word);
-+			return;
-+		}
-+		udelay(1);
-+	} while (--timeout);
-+
-+	dev_dbg(&chip->pdev->dev, "codec write timeout\n");
-+}
-+
-+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
-+		unsigned short reg)
-+{
-+	struct atmel_ac97 *chip = get_chip(ac97);
-+	unsigned long word;
-+	int timeout = 40;
-+	int write = 10;
-+
-+	word = (0x80 | (reg & 0x7f)) << 16;
-+
-+	if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
-+		ac97c_readl(chip, CORHR);
-+
-+retry_write:
-+	timeout = 40;
-+
-+	do {
-+		if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
-+			ac97c_writel(chip, COTHR, word);
-+			goto read_reg;
-+		}
-+		udelay(10);
-+	} while (--timeout);
-+
-+	if (!--write)
-+		goto timed_out;
-+	goto retry_write;
-+
-+read_reg:
-+	do {
-+		if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
-+			unsigned short val = ac97c_readl(chip, CORHR);
-+			return val;
-+		}
-+		udelay(10);
-+	} while (--timeout);
-+
-+	if (!--write)
-+		goto timed_out;
-+	goto retry_write;
-+
-+timed_out:
-+	dev_dbg(&chip->pdev->dev, "codec read timeout\n");
-+	return 0xffff;
-+}
-+
-+static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
-+{
-+	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+	if (chip->reset_pin >= 0) {
-+		gpio_set_value(chip->reset_pin, 0);
-+		/* AC97 v2.2 specifications says minimum 1 us. */
-+		udelay(5);
-+		gpio_set_value(chip->reset_pin, 1);
-+	}
-+
-+	ac97c_writel(chip, MR, AC97C_MR_WRST);
-+	mdelay(1);
-+	ac97c_writel(chip, MR, AC97C_MR_ENA);
-+}
-+
-+static void snd_atmel_ac97_destroy(struct snd_card *card)
-+{
-+	struct atmel_ac97 *chip = get_chip(card);
-+
-+	if (chip->regs)
-+		iounmap(chip->regs);
-+
-+	if (chip->mck) {
-+		clk_disable(chip->mck);
-+		clk_put(chip->mck);
-+	}
-+
-+	if (chip->dma.req_tx.req.dmac) {
-+		dma_release_channel(chip->dma.req_tx.req.dmac,
-+				chip->dma.req_tx.req.channel);
-+	}
-+	if (chip->dma.req_rx.req.dmac) {
-+		dma_release_channel(chip->dma.req_rx.req.dmac,
-+				chip->dma.req_rx.req.channel);
-+	}
-+}
-+
-+static int __devinit snd_atmel_ac97_create(struct snd_card *card,
-+		struct platform_device *pdev)
-+{
-+	static struct snd_ac97_bus_ops ops = {
-+		.write	= snd_atmel_ac97_write,
-+		.read	= snd_atmel_ac97_read,
-+	};
-+	struct atmel_ac97 *chip = get_chip(card);
-+	struct ac97c_platform_data *pdata;
-+	struct resource *regs;
-+	struct clk *mck;
-+	int err;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+
-+	pdata = pdev->dev.platform_data;
-+	if (!pdata)
-+		return -ENXIO;
-+
-+	chip->reset_pin = pdata->reset_pin;
-+
-+	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+	if (chip->reset_pin >= 0) {
-+		if (gpio_request(chip->reset_pin, chip->card->shortname)) {
-+			dev_dbg(&pdev->dev, "ac97: reset pin not available\n");
-+			chip->reset_pin = -1;
-+		} else {
-+			gpio_direction_output(chip->reset_pin, 1);
-+		}
-+	}
-+
-+	chip->dma.rx_periph_id = pdata->dma_rx_periph_id;
-+	chip->dma.tx_periph_id = pdata->dma_tx_periph_id;
-+	chip->dma.controller = pdata->dma_controller_id;
-+
-+	mck = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(mck))
-+		return PTR_ERR(mck);
-+	clk_enable(mck);
-+	chip->mck = mck;
-+
-+	card->private_free = snd_atmel_ac97_destroy;
-+
-+	spin_lock_init(&chip->lock);
-+	chip->card = card;
-+	chip->pdev = pdev;
-+
-+	chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!chip->regs)
-+		return -ENOMEM;
-+
-+	snd_card_set_dev(card, &pdev->dev);
-+
-+	err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
-+
-+	return err;
-+}
-+
-+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
-+{
-+	static int dev;
-+	struct snd_card *card;
-+	struct atmel_ac97 *chip;
-+	int err;
-+	int ch;
-+
-+	mutex_init(&opened_mutex);
-+
-+	err = -ENOMEM;
-+	card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
-+			THIS_MODULE, sizeof(struct atmel_ac97));
-+	if (!card)
-+		goto out;
-+
-+	chip = get_chip(card);
-+	chip->reset_pin = -1;
-+
-+	err = snd_atmel_ac97_create(card, pdev);
-+	if (err)
-+		goto out_free_card;
-+
-+	snd_atmel_ac97_reset(chip);
-+
-+	err = snd_atmel_ac97_mixer_new(chip);
-+	if (err)
-+		goto out_free_card;
-+
-+	err = snd_atmel_ac97_pcm_new(chip);
-+	if (err)
-+		goto out_free_card;
-+
-+	chip->dma.req_tx.req.dmac = find_dma_controller(chip->dma.controller);
-+	if (!chip->dma.req_tx.req.dmac) {
-+		dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
-+		err = -ENODEV;
-+		goto out_free_card;
-+	}
-+	chip->dma.req_rx.req.dmac = find_dma_controller(chip->dma.controller);
-+	if (!chip->dma.req_rx.req.dmac) {
-+		dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
-+		err = -ENODEV;
-+		goto out_free_card;
-+	}
-+
-+	ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
-+	if (ch < 0) {
-+		dev_dbg(&chip->pdev->dev,
-+				"could not allocate TX DMA channel\n");
-+		err = ch;
-+		goto out_free_card;
-+	}
-+	chip->dma.req_tx.req.channel = ch;
-+	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+	chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
-+	chip->dma.req_tx.req.error = atmel_ac97_error;
-+
-+	ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
-+	if (ch < 0) {
-+		dev_dbg(&chip->pdev->dev,
-+				"could not allocate RX DMA channel\n");
-+		err = ch;
-+		goto out_free_card;
-+	}
-+	chip->dma.req_rx.req.channel = ch;
-+	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+	chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
-+	chip->dma.req_rx.req.error = atmel_ac97_error;
-+
-+	strcpy(card->driver, "atmel_ac97c");
-+	strcpy(card->shortname, "atmel_ac97c");
-+	sprintf(card->longname, "Atmel AVR32 AC97 controller");
-+
-+	err = snd_card_register(card);
-+	if (err)
-+		goto out_free_card;
-+
-+	platform_set_drvdata(pdev, card);
-+	dev++;
-+
-+	dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
-+			chip->regs);
-+
-+	return 0;
-+
-+out_free_card:
-+	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+	if (chip->reset_pin >= 0)
-+		gpio_free(chip->reset_pin);
-+	snd_card_free(card);
-+out:
-+	return err;
-+}
-+
-+#ifdef CONFIG_PM
-+	static int
-+snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
-+{
-+	struct snd_card *card = platform_get_drvdata(pdev);
-+	struct atmel_ac97 *chip = card->private_data;
-+
-+	clk_disable(chip->mck);
-+
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_resume(struct platform_device *pdev)
-+{
-+	struct snd_card *card = platform_get_drvdata(pdev);
-+	struct atmel_ac97 *chip = card->private_data;
-+
-+	clk_enable(chip->mck);
-+
-+	return 0;
-+}
-+#else
-+#define snd_atmel_ac97_suspend NULL
-+#define snd_atmel_ac97_resume NULL
-+#endif
-+
-+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
-+{
-+	struct snd_card *card = platform_get_drvdata(pdev);
-+	struct atmel_ac97 *chip = get_chip(card);
-+
-+	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+	if (chip->reset_pin >= 0)
-+		gpio_free(chip->reset_pin);
-+	snd_card_free(card);
-+	platform_set_drvdata(pdev, NULL);
-+	return 0;
-+}
-+
-+static struct platform_driver atmel_ac97_driver = {
-+	.remove		= __devexit_p(snd_atmel_ac97_remove),
-+	.driver		= {
-+		.name	= "atmel_ac97c",
-+	},
-+	.suspend	= snd_atmel_ac97_suspend,
-+	.resume		= snd_atmel_ac97_resume,
-+};
-+
-+static int __init atmel_ac97_init(void)
-+{
-+	return platform_driver_probe(&atmel_ac97_driver,
-+			snd_atmel_ac97_probe);
-+}
-+module_init(atmel_ac97_init);
-+
-+static void __exit atmel_ac97_exit(void)
-+{
-+	platform_driver_unregister(&atmel_ac97_driver);
-+}
-+module_exit(atmel_ac97_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
---- /dev/null
-+++ b/sound/avr32/ac97c.h
-@@ -0,0 +1,71 @@
-+/*
-+ * Register definitions for the Atmel AC97 Controller.
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __SOUND_AVR32_AC97C_H
-+#define __SOUND_AVR32_AC97C_H
-+
-+#define AC97C_MR		0x08
-+#define AC97C_ICA		0x10
-+#define AC97C_OCA		0x14
-+#define AC97C_CARHR		0x20
-+#define AC97C_CATHR		0x24
-+#define AC97C_CASR		0x28
-+#define AC97C_CAMR		0x2c
-+#define AC97C_CBRHR		0x30
-+#define AC97C_CBTHR		0x34
-+#define AC97C_CBSR		0x38
-+#define AC97C_CBMR		0x3c
-+#define AC97C_CORHR		0x40
-+#define AC97C_COTHR		0x44
-+#define AC97C_COSR		0x48
-+#define AC97C_COMR		0x4c
-+#define AC97C_SR		0x50
-+#define AC97C_IER		0x54
-+#define AC97C_IDR		0x58
-+#define AC97C_IMR		0x5c
-+#define AC97C_VERSION		0xfc
-+
-+#define AC97C_CATPR		PDC_TPR
-+#define AC97C_CATCR		PDC_TCR
-+#define AC97C_CATNPR		PDC_TNPR
-+#define AC97C_CATNCR		PDC_TNCR
-+#define AC97C_CARPR		PDC_RPR
-+#define AC97C_CARCR		PDC_RCR
-+#define AC97C_CARNPR		PDC_RNPR
-+#define AC97C_CARNCR		PDC_RNCR
-+#define AC97C_PTCR		PDC_PTCR
-+
-+#define AC97C_MR_ENA		(1 << 0)
-+#define AC97C_MR_WRST		(1 << 1)
-+#define AC97C_MR_VRA		(1 << 2)
-+
-+#define AC97C_CSR_TXRDY		(1 << 0)
-+#define AC97C_CSR_UNRUN		(1 << 2)
-+#define AC97C_CSR_RXRDY		(1 << 4)
-+#define AC97C_CSR_ENDTX		(1 << 10)
-+#define AC97C_CSR_ENDRX		(1 << 14)
-+
-+#define AC97C_CMR_SIZE_20	(0 << 16)
-+#define AC97C_CMR_SIZE_18	(1 << 16)
-+#define AC97C_CMR_SIZE_16	(2 << 16)
-+#define AC97C_CMR_SIZE_10	(3 << 16)
-+#define AC97C_CMR_CEM_LITTLE	(1 << 18)
-+#define AC97C_CMR_CEM_BIG	(0 << 18)
-+#define AC97C_CMR_CENA		(1 << 21)
-+#define AC97C_CMR_PDCEN		(1 << 22)
-+
-+#define AC97C_SR_CAEVT		(1 << 3)
-+
-+#define AC97C_CH_ASSIGN(slot, channel)					\
-+	(AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
-+#define AC97C_CHANNEL_NONE	0x0
-+#define AC97C_CHANNEL_A		0x1
-+#define AC97C_CHANNEL_B		0x2
-+
-+#endif /* __SOUND_AVR32_AC97C_H */
---- a/sound/oss/Kconfig
-+++ b/sound/oss/Kconfig
-@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
- 	int "DAC channel"
- 	default "1"
- 	depends on SOUND_SH_DAC_AUDIO
-+
-+config SOUND_AT32_ABDAC
-+	tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
-+	depends on SOUND_PRIME && AVR32
---- a/sound/oss/Makefile
-+++ b/sound/oss/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_SOUND_OSS)		+= sound.o
- 
- # Please leave it as is, cause the link order is significant !
- 
-+obj-$(CONFIG_SOUND_AT32_ABDAC)	+= at32_abdac.o
- obj-$(CONFIG_SOUND_SH_DAC_AUDIO)	+= sh_dac_audio.o
- obj-$(CONFIG_SOUND_HAL2)	+= hal2.o
- obj-$(CONFIG_SOUND_AEDSP16)	+= aedsp16.o
---- /dev/null
-+++ b/sound/oss/at32_abdac.c
-@@ -0,0 +1,722 @@
-+/*
-+ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/sound.h>
-+#include <linux/soundcard.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
-+#include <linux/byteorder/swabb.h>
-+
-+#include "at32_abdac.h"
-+
-+#define DMA_BUFFER_SIZE	32768
-+#define DMA_PERIOD_SHIFT 10
-+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
-+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
-+
-+struct sound_settings {
-+	unsigned int format;
-+	unsigned int channels;
-+	unsigned int sample_rate;
-+	/* log2(bytes per sample) */
-+	unsigned int input_order;
-+};
-+
-+struct at32_dac {
-+	spinlock_t lock;
-+	void __iomem *regs;
-+
-+	/* head and tail refer to number of words */
-+	struct {
-+		u32 *buf;
-+		int head;
-+		int tail;
-+	} dma;
-+
-+	struct semaphore sem;
-+	wait_queue_head_t write_wait;
-+
-+	/*
-+	 * Read at most ucount bytes from ubuf, translate to 2-channel
-+	 * signed 16-bit big endian format and write to the DMA buffer
-+	 * as long as there is room left.  Return the number of bytes
-+	 * successfully copied from ubuf, or -EFAULT if the first
-+	 * sample from ubuf couldn't be read.  This function is not
-+	 * called unless there is room for at least one sample (4
-+	 * bytes) in the DMA buffer.
-+	 */
-+	ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
-+			 size_t ucount);
-+
-+	struct sound_settings dsp_settings;
-+	struct dma_request_cyclic req;
-+
-+	struct clk *mck;
-+	struct clk *sample_clk;
-+	struct platform_device *pdev;
-+	int busy;
-+	int playing;
-+	int dev_dsp;
-+};
-+static struct at32_dac *the_dac;
-+
-+static inline unsigned int abdac_get_head(struct at32_dac *dac)
-+{
-+	return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
-+}
-+
-+static inline unsigned int abdac_get_tail(struct at32_dac *dac)
-+{
-+	return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
-+}
-+
-+static inline unsigned int abdac_dma_space(struct at32_dac *dac)
-+{
-+	unsigned int space;
-+
-+	space = ((dac->dma.tail - dac->dma.head - 1)
-+		 & ((DMA_BUFFER_SIZE / 4) - 1));
-+	return space;
-+}
-+
-+static void abdac_update_dma_tail(struct at32_dac *dac)
-+{
-+	dma_addr_t dma_addr;
-+	unsigned int new_tail;
-+
-+	if (dac->playing) {
-+		dma_addr = dma_get_current_pos(dac->req.req.dmac,
-+					       dac->req.req.channel);
-+		new_tail = (dma_addr - dac->req.buffer_start) / 4;
-+		if (new_tail >= dac->dma.head
-+		    && (dac->dma.tail < dac->dma.head
-+			|| dac->dma.tail > new_tail))
-+			dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
-+		dac->dma.tail = new_tail;
-+		dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
-+			dma_addr, dac->req.buffer_start, dac->dma.tail);
-+	}
-+}
-+
-+static int abdac_start(struct at32_dac *dac)
-+{
-+	int ret;
-+
-+	if (dac->playing)
-+		return 0;
-+
-+	memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
-+
-+	clk_enable(dac->sample_clk);
-+
-+	ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
-+	if (ret)
-+		goto out_stop_clock;
-+
-+	dev_dbg(&dac->pdev->dev, "starting DMA...\n");
-+	ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
-+	if (ret)
-+		goto out_stop_request;
-+
-+	dac_writel(dac, CTRL, DAC_BIT(EN));
-+	dac->playing = 1;
-+
-+	return 0;
-+
-+out_stop_request:
-+	dma_stop_request(dac->req.req.dmac,
-+			 dac->req.req.channel);
-+out_stop_clock:
-+	clk_disable(dac->sample_clk);
-+	return ret;
-+}
-+
-+static int abdac_stop(struct at32_dac *dac)
-+{
-+	if (dac->playing) {
-+		dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
-+		dac_writel(dac, DATA, 0);
-+		dac_writel(dac, CTRL, 0);
-+		dac->playing = 0;
-+		clk_disable(dac->sample_clk);
-+	}
-+
-+	return 0;
-+}
-+
-+static int abdac_dma_prepare(struct at32_dac *dac)
-+{
-+	dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+					  &dac->req.buffer_start, GFP_KERNEL);
-+	if (!dac->dma.buf)
-+		return -ENOMEM;
-+
-+	dac->dma.head = dac->dma.tail = 0;
-+	dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
-+	dac->req.buffer_size = DMA_BUFFER_SIZE;
-+
-+	return 0;
-+}
-+
-+static void abdac_dma_cleanup(struct at32_dac *dac)
-+{
-+	if (dac->dma.buf)
-+		dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+				  dac->dma.buf, dac->req.buffer_start);
-+	dac->dma.buf = NULL;
-+}
-+
-+static void abdac_dma_block_complete(struct dma_request *req)
-+{
-+	struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
-+	struct at32_dac *dac = container_of(creq, struct at32_dac, req);
-+
-+	wake_up(&dac->write_wait);
-+}
-+
-+static void abdac_dma_error(struct dma_request *req)
-+{
-+	struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
-+	struct at32_dac *dac = container_of(creq, struct at32_dac, req);
-+
-+	dev_err(&dac->pdev->dev, "DMA error\n");
-+}
-+
-+static irqreturn_t abdac_interrupt(int irq, void *dev_id)
-+{
-+	struct at32_dac *dac = dev_id;
-+	u32 status;
-+
-+	status = dac_readl(dac, INT_STATUS);
-+	if (status & DAC_BIT(UNDERRUN)) {
-+		dev_err(&dac->pdev->dev, "Underrun detected!\n");
-+		dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
-+	} else {
-+		dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
-+			status);
-+		dac_writel(dac, INT_CLR, status);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
-+			   size_t ucount)
-+{
-+	ssize_t ret;
-+
-+	if (dac->dsp_settings.channels == 2) {
-+		const u32 __user *up = (const u32 __user *)ubuf;
-+		u32 sample;
-+
-+		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+			if (!abdac_dma_space(dac))
-+				break;
-+
-+			if (unlikely(__get_user(sample, up++))) {
-+				if (ret == 0)
-+					ret = -EFAULT;
-+				break;
-+			}
-+			dac->dma.buf[abdac_get_head(dac)] = sample;
-+			dac->dma.head++;
-+		}
-+	} else {
-+		const u16 __user *up = (const u16 __user *)ubuf;
-+		u16 sample;
-+
-+		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+			if (!abdac_dma_space(dac))
-+				break;
-+
-+			if (unlikely(__get_user(sample, up++))) {
-+				if (ret == 0)
-+					ret = -EFAULT;
-+				break;
-+			}
-+			dac->dma.buf[abdac_get_head(dac)]
-+				= (sample << 16) | sample;
-+			dac->dma.head++;
-+		}
-+	}
-+
-+	return ret;
-+}
-+
-+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
-+			   size_t ucount)
-+{
-+	ssize_t ret;
-+
-+	if (dac->dsp_settings.channels == 2) {
-+		const u32 __user *up = (const u32 __user *)ubuf;
-+		u32 sample;
-+
-+		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+			if (!abdac_dma_space(dac))
-+				break;
-+
-+			if (unlikely(__get_user(sample, up++))) {
-+				if (ret == 0)
-+					ret = -EFAULT;
-+				break;
-+			}
-+			/* Swap bytes in each halfword */
-+			dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
-+			dac->dma.head++;
-+		}
-+	} else {
-+		const u16 __user *up = (const u16 __user *)ubuf;
-+		u16 sample;
-+
-+		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+			if (!abdac_dma_space(dac))
-+				break;
-+
-+			if (unlikely(__get_user(sample, up++))) {
-+				if (ret == 0)
-+					ret = -EFAULT;
-+				break;
-+			}
-+			sample = swab16(sample);
-+			dac->dma.buf[abdac_get_head(dac)]
-+				= (sample << 16) | sample;
-+			dac->dma.head++;
-+		}
-+	}
-+
-+	return ret;
-+}
-+
-+static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
-+					       const char __user *buffer,
-+					       size_t count)
-+{
-+	/* At least one buffer must be available at this point */
-+	dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
-+
-+	return dac->trans(dac, buffer, count);
-+}
-+
-+static int abdac_set_format(struct at32_dac *dac, int format)
-+{
-+	unsigned int order;
-+
-+	switch (format) {
-+	case AFMT_S16_BE:
-+		order = 1;
-+		dac->trans = trans_s16be;
-+		break;
-+	case AFMT_S16_LE:
-+		order = 1;
-+		dac->trans = trans_s16le;
-+		break;
-+	default:
-+		dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
-+		return -EINVAL;
-+	}
-+
-+	if (dac->dsp_settings.channels == 2)
-+		order++;
-+
-+	dac->dsp_settings.input_order = order;
-+	dac->dsp_settings.format = format;
-+	return 0;
-+}
-+
-+static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
-+{
-+	unsigned long new_rate;
-+	int ret;
-+
-+	ret = clk_set_rate(dac->sample_clk, 256 * rate);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* TODO: mplayer seems to have a problem with this */
-+#if 0
-+	new_rate = clk_get_rate(dac->sample_clk);
-+	dac->dsp_settings.sample_rate = new_rate / 256;
-+#else
-+	dac->dsp_settings.sample_rate = rate;
-+#endif
-+
-+	return 0;
-+}
-+
-+static ssize_t abdac_dsp_write(struct file *file,
-+				 const char __user *buffer,
-+				 size_t count, loff_t *ppos)
-+{
-+	struct at32_dac *dac = file->private_data;
-+	DECLARE_WAITQUEUE(wait, current);
-+	unsigned int avail;
-+	ssize_t copied;
-+	ssize_t ret;
-+
-+	/* Avoid address space checking in the translation functions */
-+	if (!access_ok(buffer, count, VERIFY_READ))
-+		return -EFAULT;
-+
-+	down(&dac->sem);
-+
-+	if (!dac->dma.buf) {
-+		ret = abdac_dma_prepare(dac);
-+		if (ret)
-+			goto out;
-+	}
-+
-+	add_wait_queue(&dac->write_wait, &wait);
-+	ret = 0;
-+	while (count > 0) {
-+		do {
-+			abdac_update_dma_tail(dac);
-+			avail = abdac_dma_space(dac);
-+			set_current_state(TASK_INTERRUPTIBLE);
-+			if (avail >= DMA_WRITE_THRESHOLD)
-+				break;
-+
-+			if (file->f_flags & O_NONBLOCK) {
-+				if (!ret)
-+					ret = -EAGAIN;
-+				goto out;
-+			}
-+
-+			pr_debug("Going to wait (avail = %u, count = %zu)\n",
-+				 avail, count);
-+
-+			up(&dac->sem);
-+			schedule();
-+			if (signal_pending(current)) {
-+				if (!ret)
-+					ret = -ERESTARTSYS;
-+				goto out_nosem;
-+			}
-+			down(&dac->sem);
-+		} while (1);
-+
-+		copied = abdac_dma_translate_from_user(dac, buffer, count);
-+		if (copied < 0) {
-+			if (!ret)
-+				ret = -EFAULT;
-+			goto out;
-+		}
-+
-+		abdac_start(dac);
-+
-+		count -= copied;
-+		ret += copied;
-+	}
-+
-+out:
-+	up(&dac->sem);
-+out_nosem:
-+	remove_wait_queue(&dac->write_wait, &wait);
-+	set_current_state(TASK_RUNNING);
-+	return ret;
-+}
-+
-+static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
-+			     unsigned int cmd, unsigned long arg)
-+{
-+	struct at32_dac *dac = file->private_data;
-+	int __user *up = (int __user *)arg;
-+	struct audio_buf_info abinfo;
-+	int val, ret;
-+
-+	switch (cmd) {
-+	case OSS_GETVERSION:
-+		return put_user(SOUND_VERSION, up);
-+
-+	case SNDCTL_DSP_SPEED:
-+		if (get_user(val, up))
-+			return -EFAULT;
-+		if (val >= 0) {
-+			abdac_stop(dac);
-+			ret = abdac_set_sample_rate(dac, val);
-+			if (ret)
-+				return ret;
-+		}
-+		return put_user(dac->dsp_settings.sample_rate, up);
-+
-+	case SNDCTL_DSP_STEREO:
-+		if (get_user(val, up))
-+			return -EFAULT;
-+		abdac_stop(dac);
-+		if (val && dac->dsp_settings.channels == 1)
-+			dac->dsp_settings.input_order++;
-+		else if (!val && dac->dsp_settings.channels != 1)
-+			dac->dsp_settings.input_order--;
-+		dac->dsp_settings.channels = val ? 2 : 1;
-+		return 0;
-+
-+	case SNDCTL_DSP_CHANNELS:
-+		if (get_user(val, up))
-+			return -EFAULT;
-+
-+		if (val) {
-+			if (val < 0 || val > 2)
-+				return -EINVAL;
-+
-+			abdac_stop(dac);
-+			dac->dsp_settings.input_order
-+				+= val - dac->dsp_settings.channels;
-+			dac->dsp_settings.channels = val;
-+		}
-+		return put_user(val, (int *)arg);
-+
-+	case SNDCTL_DSP_GETFMTS:
-+		return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
-+
-+	case SNDCTL_DSP_SETFMT:
-+		if (get_user(val, up))
-+			return -EFAULT;
-+
-+		if (val == AFMT_QUERY) {
-+			val = dac->dsp_settings.format;
-+		} else {
-+			ret = abdac_set_format(dac, val);
-+			if (ret)
-+				return ret;
-+		}
-+		return put_user(val, up);
-+
-+	case SNDCTL_DSP_GETOSPACE:
-+		abdac_update_dma_tail(dac);
-+		abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
-+				   * (DMA_PERIOD_SIZE / 4));
-+		abinfo.bytes = (abdac_dma_space(dac)
-+				<< dac->dsp_settings.input_order);
-+		abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
-+				     >> (DMA_PERIOD_SHIFT
-+					 + dac->dsp_settings.input_order));
-+		abinfo.fragments = ((abinfo.bytes
-+				     >> dac->dsp_settings.input_order)
-+				    / (DMA_PERIOD_SIZE / 4));
-+		pr_debug("fragments=%d  fragstotal=%d  fragsize=%d bytes=%d\n",
-+			 abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
-+			 abinfo.bytes);
-+		return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
-+
-+	default:
-+		dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
-+		return -EINVAL;
-+	}
-+}
-+
-+static int abdac_dsp_open(struct inode *inode, struct file *file)
-+{
-+	struct at32_dac *dac = the_dac;
-+	int ret;
-+
-+	if (file->f_mode & FMODE_READ)
-+		return -ENXIO;
-+
-+	down(&dac->sem);
-+	ret = -EBUSY;
-+	if (dac->busy)
-+		goto out;
-+
-+	dac->dma.head = dac->dma.tail = 0;
-+
-+	/* FIXME: What are the correct defaults?  */
-+	dac->dsp_settings.channels = 2;
-+	abdac_set_format(dac, AFMT_S16_BE);
-+	ret = abdac_set_sample_rate(dac, 8000);
-+	if (ret)
-+		goto out;
-+
-+	file->private_data = dac;
-+	dac->busy = 1;
-+
-+	ret = 0;
-+
-+out:
-+	up(&dac->sem);
-+	return ret;
-+}
-+
-+static int abdac_dsp_release(struct inode *inode, struct file *file)
-+{
-+	struct at32_dac *dac = file->private_data;
-+
-+	down(&dac->sem);
-+
-+	abdac_stop(dac);
-+	abdac_dma_cleanup(dac);
-+	dac->busy = 0;
-+
-+	up(&dac->sem);
-+
-+	return 0;
-+}
-+
-+static struct file_operations abdac_dsp_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.write		= abdac_dsp_write,
-+	.ioctl		= abdac_dsp_ioctl,
-+	.open		= abdac_dsp_open,
-+	.release	= abdac_dsp_release,
-+};
-+
-+static int __init abdac_probe(struct platform_device *pdev)
-+{
-+	struct at32_dac *dac;
-+	struct resource *regs;
-+	struct clk *mck;
-+	struct clk *sample_clk;
-+	int irq;
-+	int ret;
-+
-+	if (the_dac)
-+		return -EBUSY;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return irq;
-+
-+	mck = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(mck))
-+		return PTR_ERR(mck);
-+	sample_clk = clk_get(&pdev->dev, "sample_clk");
-+	if (IS_ERR(sample_clk)) {
-+		ret = PTR_ERR(sample_clk);
-+		goto out_put_mck;
-+	}
-+	clk_enable(mck);
-+
-+	ret = -ENOMEM;
-+	dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
-+	if (!dac)
-+		goto out_disable_clk;
-+
-+	spin_lock_init(&dac->lock);
-+	init_MUTEX(&dac->sem);
-+	init_waitqueue_head(&dac->write_wait);
-+	dac->pdev = pdev;
-+	dac->mck = mck;
-+	dac->sample_clk = sample_clk;
-+
-+	dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!dac->regs)
-+		goto out_free_dac;
-+
-+	ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
-+	if (ret)
-+		goto out_unmap_regs;
-+
-+	/* FIXME */
-+	dac->req.req.dmac = find_dma_controller(0);
-+	if (!dac->req.req.dmac)
-+		goto out_free_irq;
-+
-+	ret = dma_alloc_channel(dac->req.req.dmac);
-+	if (ret < 0)
-+		goto out_free_irq;
-+
-+	dac->req.req.channel = ret;
-+	dac->req.req.block_complete = abdac_dma_block_complete;
-+	dac->req.req.error = abdac_dma_error;
-+	dac->req.data_reg = regs->start + DAC_DATA;
-+	dac->req.periph_id = 2; /* FIXME */
-+	dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
-+	dac->req.width = DMA_WIDTH_32BIT;
-+
-+	/* Make sure the DAC is silent and disabled */
-+	dac_writel(dac, DATA, 0);
-+	dac_writel(dac, CTRL, 0);
-+
-+	ret = register_sound_dsp(&abdac_dsp_fops, -1);
-+	if (ret < 0)
-+		goto out_free_dma;
-+	dac->dev_dsp = ret;
-+
-+	/* TODO: Register mixer */
-+
-+	the_dac = dac;
-+	platform_set_drvdata(pdev, dac);
-+
-+	return 0;
-+
-+out_free_dma:
-+	dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+out_free_irq:
-+	free_irq(irq, dac);
-+out_unmap_regs:
-+	iounmap(dac->regs);
-+out_free_dac:
-+	kfree(dac);
-+out_disable_clk:
-+	clk_disable(mck);
-+	clk_put(sample_clk);
-+out_put_mck:
-+	clk_put(mck);
-+	return ret;
-+}
-+
-+static int __exit abdac_remove(struct platform_device *pdev)
-+{
-+	struct at32_dac *dac;
-+
-+	dac = platform_get_drvdata(pdev);
-+	if (dac) {
-+		unregister_sound_dsp(dac->dev_dsp);
-+		dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+		free_irq(platform_get_irq(pdev, 0), dac);
-+		iounmap(dac->regs);
-+		clk_disable(dac->mck);
-+		clk_put(dac->sample_clk);
-+		clk_put(dac->mck);
-+		kfree(dac);
-+		platform_set_drvdata(pdev, NULL);
-+		the_dac = NULL;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver abdac_driver = {
-+	.remove		= __exit_p(abdac_remove),
-+	.driver		= {
-+		.name	= "abdac",
-+	},
-+};
-+
-+static int __init abdac_init(void)
-+{
-+	return platform_driver_probe(&abdac_driver, abdac_probe);
-+}
-+module_init(abdac_init);
-+
-+static void __exit abdac_exit(void)
-+{
-+	platform_driver_unregister(&abdac_driver);
-+}
-+module_exit(abdac_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/oss/at32_abdac.h
-@@ -0,0 +1,59 @@
-+/*
-+ * Register definitions for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __SOUND_OSS_AT32_ABDAC_H__
-+#define __SOUND_OSS_AT32_ABDAC_H__
-+
-+/* DAC register offsets */
-+#define DAC_DATA                                0x0000
-+#define DAC_CTRL                                0x0008
-+#define DAC_INT_MASK                            0x000c
-+#define DAC_INT_EN                              0x0010
-+#define DAC_INT_DIS                             0x0014
-+#define DAC_INT_CLR                             0x0018
-+#define DAC_INT_STATUS                          0x001c
-+#define DAC_PDC_DATA                            0x0020
-+
-+/* Bitfields in CTRL */
-+#define DAC_SWAP_OFFSET                         30
-+#define DAC_SWAP_SIZE                           1
-+#define DAC_EN_OFFSET                           31
-+#define DAC_EN_SIZE                             1
-+
-+/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
-+#define DAC_UNDERRUN_OFFSET                     28
-+#define DAC_UNDERRUN_SIZE                       1
-+#define DAC_TX_READY_OFFSET                     29
-+#define DAC_TX_READY_SIZE                       1
-+#define DAC_TX_BUFFER_EMPTY_OFFSET              30
-+#define DAC_TX_BUFFER_EMPTY_SIZE                1
-+#define DAC_CHANNEL_TX_END_OFFSET               31
-+#define DAC_CHANNEL_TX_END_SIZE                 1
-+
-+/* Bit manipulation macros */
-+#define DAC_BIT(name)					\
-+	(1 << DAC_##name##_OFFSET)
-+#define DAC_BF(name, value)				\
-+	(((value) & ((1 << DAC_##name##_SIZE) - 1))	\
-+	 << DAC_##name##_OFFSET)
-+#define DAC_BFEXT(name, value)				\
-+	(((value) >> DAC_##name##_OFFSET)		\
-+	 & ((1 << DAC_##name##_SIZE) - 1))
-+#define DAC_BFINS(name, value, old)			\
-+	(((old) & ~(((1 << DAC_##name##_SIZE) - 1)	\
-+		    << DAC_##name##_OFFSET))		\
-+	 | DAC_BF(name,value))
-+
-+/* Register access macros */
-+#define dac_readl(port, reg)				\
-+	__raw_readl((port)->regs + DAC_##reg)
-+#define dac_writel(port, reg, value)			\
-+	__raw_writel((value), (port)->regs + DAC_##reg)
-+
-+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
---- a/sound/spi/at73c213.c
-+++ b/sound/spi/at73c213.c
-@@ -737,7 +737,7 @@ cleanup:
- /*
-  * Device functions
-  */
--static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
-+static int __devinit snd_at73c213_ssc_init(struct snd_at73c213 *chip)
- {
- 	/*
- 	 * Continuous clock output.
-@@ -767,7 +767,7 @@ static int snd_at73c213_ssc_init(struct 
- 	return 0;
- }
- 
--static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
-+static int __devinit snd_at73c213_chip_init(struct snd_at73c213 *chip)
- {
- 	int retval;
- 	unsigned char dac_ctrl = 0;
-@@ -933,7 +933,7 @@ out:
- 	return retval;
- }
- 
--static int snd_at73c213_probe(struct spi_device *spi)
-+static int __devinit snd_at73c213_probe(struct spi_device *spi)
- {
- 	struct snd_card			*card;
- 	struct snd_at73c213		*chip;