omap24xx: Add 2.6.38 files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25746 3c298f89-4303-0410-b956-a3cf2f4a3e73

16 files changed, 11188 insertions, 0 deletions

diff --git a/target/linux/omap24xx/config-2.6.38 b/target/linux/omap24xx/config-2.6.38
new file mode 100644
index 0000000000..c68a79e299
--- /dev/null
+++ b/target/linux/omap24xx/config-2.6.38
@@ -0,0 +1,698 @@
+# CONFIG_AD2S120X is not set
+# CONFIG_AD2S1210 is not set
+# CONFIG_AD2S90 is not set
+# CONFIG_AD5446 is not set
+# CONFIG_AD5624R_SPI is not set
+# CONFIG_AD5930 is not set
+# CONFIG_AD7150 is not set
+# CONFIG_AD7152 is not set
+# CONFIG_AD7291 is not set
+# CONFIG_AD7298 is not set
+# CONFIG_AD7314 is not set
+# CONFIG_AD7476 is not set
+# CONFIG_AD7745 is not set
+# CONFIG_AD7816 is not set
+# CONFIG_AD7887 is not set
+# CONFIG_AD799X is not set
+# CONFIG_AD9832 is not set
+# CONFIG_AD9834 is not set
+# CONFIG_AD9850 is not set
+# CONFIG_AD9852 is not set
+# CONFIG_AD9910 is not set
+# CONFIG_AD9951 is not set
+# CONFIG_ADE7753 is not set
+# CONFIG_ADE7754 is not set
+# CONFIG_ADE7758 is not set
+# CONFIG_ADE7759 is not set
+# CONFIG_ADE7854 is not set
+# CONFIG_ADIS16060 is not set
+# CONFIG_ADIS16080 is not set
+# CONFIG_ADIS16130 is not set
+CONFIG_ADIS16201=m
+CONFIG_ADIS16203=m
+CONFIG_ADIS16204=m
+# CONFIG_ADIS16209 is not set
+# CONFIG_ADIS16220 is not set
+# CONFIG_ADIS16240 is not set
+# CONFIG_ADIS16251 is not set
+# CONFIG_ADIS16260 is not set
+# CONFIG_ADIS16300 is not set
+# CONFIG_ADIS16350 is not set
+# CONFIG_ADIS16400 is not set
+# CONFIG_ADT7310 is not set
+# CONFIG_ADT7316 is not set
+# CONFIG_ADT7410 is not set
+# CONFIG_ADT75 is not set
+CONFIG_AEABI=y
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_ARM=y
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_411920=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_ARPD is not set
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_IRQ_AFFINITY is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_BKL is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_BRIDGE=m
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BT=m
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HCIH4P=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_SCO=m
+CONFIG_CBUS=y
+CONFIG_CBUS_RETU=y
+CONFIG_CBUS_RETU_HEADSET=y
+CONFIG_CBUS_RETU_POWERBUTTON=y
+CONFIG_CBUS_RETU_WDT=y
+CONFIG_CBUS_TAHVO=y
+# CONFIG_CBUS_TAHVO_USB is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CMDLINE="root=/dev/mmcblk0p1 rootfstype=ext4,ext3,ext2,squashfs,jffs2 console=tty0 console=ttyO2,115200n8 earlyprintk"
+CONFIG_CMDLINE_FORCE=y
+# CONFIG_COMPACTION is not set
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CPU_32v6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_ABRT_EV6=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CPU_V6=y
+CONFIG_CRC16=y
+CONFIG_CRC7=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+CONFIG_CRYPTO_DEV_OMAP_SHAM=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEFAULT_CFQ=y
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_DEVKMEM=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DNOTIFY=y
+CONFIG_DNS_RESOLVER=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_ECRYPT_FS is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXPERT=y
+CONFIG_EXPORTFS=m
+CONFIG_EXT4_FS=y
+CONFIG_FAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+CONFIG_FB_OMAP_LCDC_BLIZZARD=y
+CONFIG_FB_OMAP_LCDC_EXTERNAL=y
+# CONFIG_FB_OMAP_LCDC_HWA742 is not set
+CONFIG_FB_OMAP_LCD_MIPID=y
+# CONFIG_FB_OMAP_MANUAL_UPDATE is not set
+# CONFIG_FB_SM7XX is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FONTS=y
+# CONFIG_FONT_10x18 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_SUN8x16 is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FREEZER=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ACL=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
+# CONFIG_GENERIC_PENDING_IRQ is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SCHED_CLOCK=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_HID=y
+CONFIG_HID_APPLE=m
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID_WACOM=m
+# CONFIG_HID_WACOM_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+CONFIG_HZ=128
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_OMAP=y
+CONFIG_IIO=y
+# CONFIG_IIO_RING_BUFFER is not set
+# CONFIG_IIO_TRIGGER is not set
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_INET_TUNNEL=m
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+CONFIG_INOTIFY_USER=y
+CONFIG_INPUT=y
+# CONFIG_INPUT_APMPOWER is not set
+# CONFIG_INPUT_CMA3000 is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_GPIO_BUTTONS is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_TABLET=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_SIT=m
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_IRQ_PER_CPU is not set
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_IR_RC5_SZ_DECODER=m
+# CONFIG_ISDN is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_JBD2=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_AS5011 is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
+CONFIG_KALLSYMS=y
+CONFIG_KEXEC=y
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_LM8323=y
+# CONFIG_KEYBOARD_OMAP is not set
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_KXSD9 is not set
+CONFIG_LEDS=y
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_REGULATOR is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LIRC=m
+# CONFIG_LIS3L02DQ is not set
+CONFIG_LLC=m
+CONFIG_LOCKD=m
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_NOKIA_N800=y
+CONFIG_MACH_NOKIA_N810=y
+CONFIG_MACH_NOKIA_N810_WIMAX=y
+CONFIG_MACH_NOKIA_N8X0=y
+CONFIG_MACH_NO_WESTBRIDGE=y
+CONFIG_MACH_OMAP2_TUSB6010=y
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+# CONFIG_MACH_OMAP_H4 is not set
+CONFIG_MACVLAN=m
+CONFIG_MAC_PARTITION=y
+# CONFIG_MAX1363 is not set
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MENELAUS=y
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_CLKGATE=y
+# CONFIG_MMC_DW is not set
+CONFIG_MMC_OMAP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SPI=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MSDOS_FS=y
+CONFIG_MTD_BLOCK2MTD=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_MTD_ONENAND_OTP=y
+# CONFIG_MTD_ONENAND_SIM is not set
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
+# CONFIG_MTD_ROOTFS_SPLIT is not set
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_NAMESPACES=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NETDEV_10000=y
+# CONFIG_NET_NS is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_DEPRECATED=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NLS=y
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_NO_HZ=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_OMAP2_DSS is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_BOOT_REASON=y
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_COMPONENT_VERSION=y
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MBOX_FWK=y
+CONFIG_OMAP_MBOX_KFIFO_SIZE=256
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_PACKAGE_ZAC=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_OPS=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_SLEEP=y
+CONFIG_PNFS_FILE_LAYOUT=m
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_PPP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_QUOTACTL is not set
+# CONFIG_RCU_BOOST is not set
+CONFIG_RC_CORE=m
+# CONFIG_RC_LOOPBACK is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_TPS6524X is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SCSI=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_SENSORS_AK8975 is not set
+# CONFIG_SENSORS_HMC5843 is not set
+# CONFIG_SENSORS_ISL29018 is not set
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_TSL2563=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_IFX6X60 is not set
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIO=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SLAB is not set
+CONFIG_SLHC=m
+CONFIG_SLUB=y
+CONFIG_SND=m
+CONFIG_SND_ARM=y
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_JACK=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_MCBSP=m
+CONFIG_SND_OMAP_SOC_N810=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+CONFIG_SND_PCM=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_CACHE_LZO=y
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_TIMER=m
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTPC=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_DECPC=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DTLK=m
+CONFIG_SPEAKUP_SYNTH_DUMMY=m
+CONFIG_SPEAKUP_SYNTH_KEYPC=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+CONFIG_SPI=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_PXA2XX_PCI is not set
+CONFIG_STP=m
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_TABLET_USB_ACECAD is not set
+# CONFIG_TABLET_USB_AIPTEK is not set
+# CONFIG_TABLET_USB_GTCO is not set
+# CONFIG_TABLET_USB_HANWANG is not set
+# CONFIG_TABLET_USB_KBTAB is not set
+# CONFIG_TABLET_USB_WACOM is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TINY_PREEMPT_RCU=y
+# CONFIG_TINY_RCU is not set
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
+CONFIG_TOUCHSCREEN_TSC2005=y
+CONFIG_TUN=m
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_UID16=y
+CONFIG_USB=m
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_VBUS_DRAW=100
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_HID is not set
+CONFIG_USB_G_NCM=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_WEBCAM is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_MUSB_AM35X is not set
+CONFIG_USB_MUSB_DEBUG=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_OMAP2PLUS is not set
+CONFIG_USB_MUSB_OTG=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_TUSB6010=y
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_PWC is not set
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_TUSB_OMAP_DMA=y
+CONFIG_USB_USBNET=m
+# CONFIG_USB_ZERO is not set
+# CONFIG_USER_NS is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFAT_FS=y
+CONFIG_VFP=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_CPIA2 is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_IR_I2C=m
+CONFIG_VIDEO_MEDIA=m
+# CONFIG_VIDEO_OMAP2 is not set
+# CONFIG_VIDEO_OMAP2_VOUT is not set
+CONFIG_VIDEO_TCM825X=m
+# CONFIG_VIDEO_TIMBERDALE is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/omap24xx/patches-2.6.38/200-omap-platform.patch b/target/linux/omap24xx/patches-2.6.38/200-omap-platform.patch
new file mode 100644
index 0000000000..2c31b24a63
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/200-omap-platform.patch
@@ -0,0 +1,912 @@
+Index: linux-2.6.38-rc6/arch/arm/plat-omap/bootreason.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/arch/arm/plat-omap/bootreason.c	2011-02-25 01:11:27.298563256 +0100
+@@ -0,0 +1,79 @@
++/*
++ * linux/arch/arm/plat-omap/bootreason.c
++ *
++ * OMAP Bootreason passing
++ *
++ * Copyright (c) 2004 Nokia
++ *
++ * Written by David Weinehall <david.weinehall@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/proc_fs.h>
++#include <linux/errno.h>
++#include <plat/board.h>
++
++static char boot_reason[16];
++
++static int omap_bootreason_read_proc(char *page, char **start, off_t off,
++					 int count, int *eof, void *data)
++{
++	int len = 0;
++
++	len += sprintf(page + len, "%s\n", boot_reason);
++
++	*start = page + off;
++
++	if (len > off)
++		len -= off;
++	else
++		len = 0;
++
++	return len < count ? len  : count;
++}
++
++static int __init bootreason_init(void)
++{
++	const struct omap_boot_reason_config *cfg;
++	int reason_valid = 0;
++
++	cfg = omap_get_config(OMAP_TAG_BOOT_REASON, struct omap_boot_reason_config);
++	if (cfg != NULL) {
++		strncpy(boot_reason, cfg->reason_str, sizeof(cfg->reason_str));
++		boot_reason[sizeof(cfg->reason_str)] = 0;
++		reason_valid = 1;
++	} else {
++		/* Read the boot reason from the OMAP registers */
++	}
++
++	if (!reason_valid)
++		return -ENOENT;
++
++	printk(KERN_INFO "Bootup reason: %s\n", boot_reason);
++
++	if (!create_proc_read_entry("bootreason", S_IRUGO, NULL,
++					omap_bootreason_read_proc, NULL))
++		return -ENOMEM;
++
++	return 0;
++}
++
++late_initcall(bootreason_init);
+Index: linux-2.6.38-rc6/arch/arm/plat-omap/common.c
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/plat-omap/common.c	2011-02-25 01:10:25.645115298 +0100
++++ linux-2.6.38-rc6/arch/arm/plat-omap/common.c	2011-02-25 01:11:27.298563256 +0100
+@@ -21,17 +21,89 @@
+ #include <plat/vram.h>
+ #include <plat/dsp.h>
+ 
++#include <asm/setup.h>
++
+ 
+ #define NO_LENGTH_CHECK 0xffffffff
+ 
+ struct omap_board_config_kernel *omap_board_config;
+ int omap_board_config_size;
+ 
++unsigned char omap_bootloader_tag[1024];
++int omap_bootloader_tag_len;
++
++/* used by omap-smp.c and board-4430sdp.c */
++void __iomem *gic_cpu_base_addr;
++
++#ifdef CONFIG_OMAP_BOOT_TAG
++
++static int __init parse_tag_omap(const struct tag *tag)
++{
++	u32 size = tag->hdr.size - (sizeof(tag->hdr) >> 2);
++
++        size <<= 2;
++	if (size > sizeof(omap_bootloader_tag))
++		return -1;
++
++	memcpy(omap_bootloader_tag, tag->u.omap.data, size);
++	omap_bootloader_tag_len = size;
++
++        return 0;
++}
++
++__tagtable(ATAG_BOARD, parse_tag_omap);
++
++#endif
++
+ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
+ {
+ 	struct omap_board_config_kernel *kinfo = NULL;
+ 	int i;
+ 
++#ifdef CONFIG_OMAP_BOOT_TAG
++	struct omap_board_config_entry *info = NULL;
++
++	if (omap_bootloader_tag_len > 4)
++		info = (struct omap_board_config_entry *) omap_bootloader_tag;
++	while (info != NULL) {
++		u8 *next;
++
++		if (info->tag == tag) {
++			if (skip == 0)
++				break;
++			skip--;
++		}
++
++		if ((info->len & 0x03) != 0) {
++			/* We bail out to avoid an alignment fault */
++			printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
++			       info->len, info->tag);
++			return NULL;
++		}
++		next = (u8 *) info + sizeof(*info) + info->len;
++		if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
++			info = NULL;
++		else
++			info = (struct omap_board_config_entry *) next;
++	}
++	if (info != NULL) {
++		/* Check the length as a lame attempt to check for
++		 * binary inconsistency. */
++		if (len != NO_LENGTH_CHECK) {
++			/* Word-align len */
++			if (len & 0x03)
++				len = (len + 3) & ~0x03;
++			if (info->len != len) {
++				printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
++				       tag, len, info->len);
++				return NULL;
++			}
++		}
++		if (len_out != NULL)
++			*len_out = info->len;
++		return info->data;
++	}
++#endif
+ 	/* Try to find the config from the board-specific structures
+ 	 * in the kernel. */
+ 	for (i = 0; i < omap_board_config_size; i++) {
+Index: linux-2.6.38-rc6/arch/arm/plat-omap/component-version.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/arch/arm/plat-omap/component-version.c	2011-02-25 01:11:27.299563117 +0100
+@@ -0,0 +1,64 @@
++/*
++ *  linux/arch/arm/plat-omap/component-version.c
++ *
++ *  Copyright (C) 2005 Nokia Corporation
++ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/err.h>
++#include <linux/proc_fs.h>
++#include <plat/board.h>
++
++static int component_version_read_proc(char *page, char **start, off_t off,
++				       int count, int *eof, void *data)
++{
++	int len, i;
++	const struct omap_version_config *ver;
++	char *p;
++
++	i = 0;
++	p = page;
++	while ((ver = omap_get_nr_config(OMAP_TAG_VERSION_STR,
++					 struct omap_version_config, i)) != NULL) {
++		p += sprintf(p, "%-12s%s\n", ver->component, ver->version);
++		i++;
++	}
++
++	len = (p - page) - off;
++	if (len < 0)
++		len = 0;
++
++	*eof = (len <= count) ? 1 : 0;
++	*start = page + off;
++
++	return len;
++}
++
++static int __init component_version_init(void)
++{
++	if (omap_get_config(OMAP_TAG_VERSION_STR, struct omap_version_config) == NULL)
++		return -ENODEV;
++	if (!create_proc_read_entry("component_version", S_IRUGO, NULL,
++				    component_version_read_proc, NULL))
++		return -ENOMEM;
++
++	return 0;
++}
++
++static void __exit component_version_exit(void)
++{
++	remove_proc_entry("component_version", NULL);
++}
++
++late_initcall(component_version_init);
++module_exit(component_version_exit);
++
++MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>");
++MODULE_DESCRIPTION("Component version driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.38-rc6/arch/arm/plat-omap/Kconfig
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/plat-omap/Kconfig	2011-02-25 01:10:25.621118611 +0100
++++ linux-2.6.38-rc6/arch/arm/plat-omap/Kconfig	2011-02-25 01:11:27.299563117 +0100
+@@ -79,6 +79,38 @@
+ 	  probably do not want this option enabled until your
+ 	  device drivers work properly.
+ 
++config OMAP_BOOT_TAG
++	bool "OMAP bootloader information passing"
++        depends on ARCH_OMAP
++        default n
++        help
++          Say Y, if you have a bootloader which passes information
++          about your board and its peripheral configuration.
++
++config OMAP_BOOT_REASON
++	bool "Support for boot reason"
++        depends on OMAP_BOOT_TAG
++        default n
++        help
++          Say Y, if you want to have a procfs entry for reading the boot
++          reason in user-space.
++
++config OMAP_COMPONENT_VERSION
++	bool "Support for component version display"
++	depends on OMAP_BOOT_TAG && PROC_FS
++	default n
++	help
++	  Say Y, if you want to have a procfs entry for reading component
++	  versions (supplied by the bootloader) in user-space.
++
++config OMAP_GPIO_SWITCH
++	bool "GPIO switch support"
++	help
++	  Say Y, if you want to have support for reporting of GPIO
++	  switches (e.g. cover switches) via sysfs. Your bootloader has
++	  to provide information about the switches to the kernel via the
++	  ATAG_BOARD mechanism if they're not defined by the board config.
++
+ config OMAP_MUX
+ 	bool "OMAP multiplexing support"
+ 	depends on ARCH_OMAP
+Index: linux-2.6.38-rc6/arch/arm/plat-omap/Makefile
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/plat-omap/Makefile	2011-02-25 01:10:25.604120958 +0100
++++ linux-2.6.38-rc6/arch/arm/plat-omap/Makefile	2011-02-25 01:11:27.299563117 +0100
+@@ -23,6 +23,9 @@
+ 
+ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
+ obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
++obj-$(CONFIG_OMAP_BOOT_REASON) += bootreason.o
++obj-$(CONFIG_OMAP_COMPONENT_VERSION) += component-version.o
++obj-$(CONFIG_OMAP_GPIO_SWITCH) += gpio-switch.o
+ obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
+ obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
+ i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+Index: linux-2.6.38-rc6/arch/arm/include/asm/setup.h
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/include/asm/setup.h	2011-02-25 01:10:25.523132140 +0100
++++ linux-2.6.38-rc6/arch/arm/include/asm/setup.h	2011-02-25 01:11:27.300562978 +0100
+@@ -136,6 +136,13 @@
+ 	__u8 adfsdrives;
+ };
+ 
++/* TI OMAP specific information */
++#define ATAG_BOARD       0x414f4d50
++
++struct tag_omap {
++	u8 data[0];
++};
++
+ /* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
+ #define ATAG_MEMCLK	0x41000402
+ 
+@@ -162,6 +169,11 @@
+ 		struct tag_acorn	acorn;
+ 
+ 		/*
++		 * OMAP specific
++                 */
++                struct tag_omap         omap;
++
++		/*
+ 		 * DC21285 specific
+ 		 */
+ 		struct tag_memclk	memclk;
+Index: linux-2.6.38-rc6/arch/arm/plat-omap/gpio-switch.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/arch/arm/plat-omap/gpio-switch.c	2011-02-25 01:11:27.301562839 +0100
+@@ -0,0 +1,554 @@
++/*
++ *  linux/arch/arm/plat-omap/gpio-switch.c
++ *
++ *  Copyright (C) 2004-2006 Nokia Corporation
++ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
++ *         and Paul Mundt <paul.mundt@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/sched.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/timer.h>
++#include <linux/err.h>
++#include <linux/slab.h>
++#include <linux/gpio.h>
++#include <plat/hardware.h>
++#include <plat/irqs.h>
++#include <plat/mux.h>
++#include <plat/board.h>
++#include <plat/gpio-switch.h>
++
++struct gpio_switch {
++	char		name[14];
++	u16		gpio;
++	unsigned	flags:4;
++	unsigned	type:4;
++	unsigned	state:1;
++	unsigned	both_edges:1;
++
++	u16		debounce_rising;
++	u16		debounce_falling;
++
++	void (* notify)(void *data, int state);
++	void *notify_data;
++
++	struct work_struct	work;
++	struct timer_list	timer;
++	struct platform_device	pdev;
++
++	struct list_head	node;
++};
++
++static LIST_HEAD(gpio_switches);
++static struct platform_device *gpio_sw_platform_dev;
++static struct platform_driver gpio_sw_driver;
++
++static const struct omap_gpio_switch *board_gpio_sw_table;
++static int board_gpio_sw_count;
++
++static const char *cover_str[2] = { "open", "closed" };
++static const char *connection_str[2] = { "disconnected", "connected" };
++static const char *activity_str[2] = { "inactive", "active" };
++
++/*
++ * GPIO switch state default debounce delay in ms
++ */
++#define OMAP_GPIO_SW_DEFAULT_DEBOUNCE		10
++
++static const char **get_sw_str(struct gpio_switch *sw)
++{
++	switch (sw->type) {
++	case OMAP_GPIO_SWITCH_TYPE_COVER:
++		return cover_str;
++	case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
++		return connection_str;
++	case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
++		return activity_str;
++	default:
++		BUG();
++		return NULL;
++	}
++}
++
++static const char *get_sw_type(struct gpio_switch *sw)
++{
++	switch (sw->type) {
++	case OMAP_GPIO_SWITCH_TYPE_COVER:
++		return "cover";
++	case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
++		return "connection";
++	case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
++		return "activity";
++	default:
++		BUG();
++		return NULL;
++	}
++}
++
++static void print_sw_state(struct gpio_switch *sw, int state)
++{
++	const char **str;
++
++	str = get_sw_str(sw);
++	if (str != NULL)
++		printk(KERN_INFO "%s (GPIO %d) is now %s\n", sw->name, sw->gpio, str[state]);
++}
++
++static int gpio_sw_get_state(struct gpio_switch *sw)
++{
++	int state;
++
++	state = gpio_get_value(sw->gpio);
++	if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
++		state = !state;
++
++	return state;
++}
++
++static ssize_t gpio_sw_state_store(struct device *dev,
++				   struct device_attribute *attr,
++				   const char *buf,
++				   size_t count)
++{
++	struct gpio_switch *sw = dev_get_drvdata(dev);
++	const char **str;
++	char state[16];
++	int enable;
++
++	if (!(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT))
++		return -EPERM;
++
++	if (sscanf(buf, "%15s", state) != 1)
++		return -EINVAL;
++
++	str = get_sw_str(sw);
++	if (strcmp(state, str[0]) == 0)
++		sw->state = enable = 0;
++	else if (strcmp(state, str[1]) == 0)
++		sw->state = enable = 1;
++	else
++		return -EINVAL;
++
++	if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
++		enable = !enable;
++	gpio_set_value(sw->gpio, enable);
++
++	return count;
++}
++
++static ssize_t gpio_sw_state_show(struct device *dev,
++				  struct device_attribute *attr,
++				  char *buf)
++{
++	struct gpio_switch *sw = dev_get_drvdata(dev);
++	const char **str;
++
++	str = get_sw_str(sw);
++	return sprintf(buf, "%s\n", str[sw->state]);
++}
++
++static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, gpio_sw_state_show,
++		   gpio_sw_state_store);
++
++static ssize_t gpio_sw_type_show(struct device *dev,
++				 struct device_attribute *attr,
++				 char *buf)
++{
++	struct gpio_switch *sw = dev_get_drvdata(dev);
++
++	return sprintf(buf, "%s\n", get_sw_type(sw));
++}
++
++static DEVICE_ATTR(type, S_IRUGO, gpio_sw_type_show, NULL);
++
++static ssize_t gpio_sw_direction_show(struct device *dev,
++				      struct device_attribute *attr,
++				      char *buf)
++{
++	struct gpio_switch *sw = dev_get_drvdata(dev);
++	int is_output;
++
++	is_output = sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT;
++	return sprintf(buf, "%s\n", is_output ? "output" : "input");
++}
++
++static DEVICE_ATTR(direction, S_IRUGO, gpio_sw_direction_show, NULL);
++
++
++static irqreturn_t gpio_sw_irq_handler(int irq, void *arg)
++{
++	struct gpio_switch *sw = arg;
++	unsigned long timeout;
++	int state;
++
++	if (!sw->both_edges) {
++		if (gpio_get_value(sw->gpio))
++			set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_FALLING);
++		else
++			set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_RISING);
++	}
++
++	state = gpio_sw_get_state(sw);
++	if (sw->state == state)
++		return IRQ_HANDLED;
++
++	if (state)
++		timeout = sw->debounce_rising;
++	else
++		timeout = sw->debounce_falling;
++	if (!timeout)
++		schedule_work(&sw->work);
++	else
++		mod_timer(&sw->timer, jiffies + msecs_to_jiffies(timeout));
++
++	return IRQ_HANDLED;
++}
++
++static void gpio_sw_timer(unsigned long arg)
++{
++	struct gpio_switch *sw = (struct gpio_switch *) arg;
++
++	schedule_work(&sw->work);
++}
++
++static void gpio_sw_handler(struct work_struct *work)
++{
++	struct gpio_switch *sw = container_of(work, struct gpio_switch, work);
++	int state;
++
++	state = gpio_sw_get_state(sw);
++	if (sw->state == state)
++		return;
++
++	sw->state = state;
++	if (sw->notify != NULL)
++		sw->notify(sw->notify_data, state);
++	sysfs_notify(&sw->pdev.dev.kobj, NULL, "state");
++	print_sw_state(sw, state);
++}
++
++static int __init can_do_both_edges(struct gpio_switch *sw)
++{
++	if (!cpu_class_is_omap1())
++		return 1;
++	if (OMAP_GPIO_IS_MPUIO(sw->gpio))
++		return 0;
++	else
++		return 1;
++}
++
++static void gpio_sw_release(struct device *dev)
++{
++}
++
++static int __init new_switch(struct gpio_switch *sw)
++{
++	int r, direction, trigger;
++
++	switch (sw->type) {
++	case OMAP_GPIO_SWITCH_TYPE_COVER:
++	case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
++	case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
++		break;
++	default:
++		printk(KERN_ERR "invalid GPIO switch type: %d\n", sw->type);
++		return -EINVAL;
++	}
++
++	sw->pdev.name	= sw->name;
++	sw->pdev.id	= -1;
++
++	sw->pdev.dev.parent = &gpio_sw_platform_dev->dev;
++	sw->pdev.dev.driver = &gpio_sw_driver.driver;
++	sw->pdev.dev.release = gpio_sw_release;
++
++	r = platform_device_register(&sw->pdev);
++	if (r) {
++		printk(KERN_ERR "gpio-switch: platform device registration "
++		       "failed for %s", sw->name);
++		return r;
++	}
++	dev_set_drvdata(&sw->pdev.dev, sw);
++
++	r = gpio_request(sw->gpio, "gpio-switch");
++	if (r < 0) {
++		platform_device_unregister(&sw->pdev);
++		return r;
++	}
++
++	/* input: 1, output: 0 */
++	direction = !(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT);
++	if (direction)
++		gpio_direction_input(sw->gpio);
++	else
++		gpio_direction_output(sw->gpio, 0);
++
++	sw->state = gpio_sw_get_state(sw);
++
++	r = 0;
++	r |= device_create_file(&sw->pdev.dev, &dev_attr_state);
++	r |= device_create_file(&sw->pdev.dev, &dev_attr_type);
++	r |= device_create_file(&sw->pdev.dev, &dev_attr_direction);
++	if (r)
++		printk(KERN_ERR "gpio-switch: attribute file creation "
++		       "failed for %s\n", sw->name);
++
++	if (!direction)
++		return 0;
++
++	if (can_do_both_edges(sw)) {
++		trigger = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
++		sw->both_edges = 1;
++	} else {
++		if (gpio_get_value(sw->gpio))
++			trigger = IRQF_TRIGGER_FALLING;
++		else
++			trigger = IRQF_TRIGGER_RISING;
++	}
++	r = request_irq(OMAP_GPIO_IRQ(sw->gpio), gpio_sw_irq_handler,
++			IRQF_SHARED | trigger, sw->name, sw);
++	if (r < 0) {
++		printk(KERN_ERR "gpio-switch: request_irq() failed "
++		       "for GPIO %d\n", sw->gpio);
++		platform_device_unregister(&sw->pdev);
++		gpio_free(sw->gpio);
++		return r;
++	}
++
++	INIT_WORK(&sw->work, gpio_sw_handler);
++	init_timer(&sw->timer);
++
++	sw->timer.function = gpio_sw_timer;
++	sw->timer.data = (unsigned long)sw;
++
++	list_add(&sw->node, &gpio_switches);
++
++	return 0;
++}
++
++static int __init add_atag_switches(void)
++{
++	const struct omap_gpio_switch_config *cfg;
++	struct gpio_switch *sw;
++	int i, r;
++
++	for (i = 0; ; i++) {
++		cfg = omap_get_nr_config(OMAP_TAG_GPIO_SWITCH,
++					 struct omap_gpio_switch_config, i);
++		if (cfg == NULL)
++			break;
++		sw = kzalloc(sizeof(*sw), GFP_KERNEL);
++		if (sw == NULL) {
++			printk(KERN_ERR "gpio-switch: kmalloc failed\n");
++			return -ENOMEM;
++		}
++		strncpy(sw->name, cfg->name, sizeof(cfg->name));
++		sw->gpio = cfg->gpio;
++		sw->flags = cfg->flags;
++		sw->type = cfg->type;
++		sw->debounce_rising = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
++		sw->debounce_falling = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
++		if ((r = new_switch(sw)) < 0) {
++			kfree(sw);
++			return r;
++		}
++	}
++	return 0;
++}
++
++static struct gpio_switch * __init find_switch(int gpio, const char *name)
++{
++	struct gpio_switch *sw;
++
++	list_for_each_entry(sw, &gpio_switches, node) {
++		if ((gpio < 0 || sw->gpio != gpio) &&
++		    (name == NULL || strcmp(sw->name, name) != 0))
++			continue;
++
++		if (gpio < 0 || name == NULL)
++			goto no_check;
++
++		if (strcmp(sw->name, name) != 0)
++			printk("gpio-switch: name mismatch for %d (%s, %s)\n",
++			       gpio, name, sw->name);
++		else if (sw->gpio != gpio)
++			printk("gpio-switch: GPIO mismatch for %s (%d, %d)\n",
++			       name, gpio, sw->gpio);
++no_check:
++		return sw;
++	}
++	return NULL;
++}
++
++static int __init add_board_switches(void)
++{
++	int i;
++
++	for (i = 0; i < board_gpio_sw_count; i++) {
++		const struct omap_gpio_switch *cfg;
++		struct gpio_switch *sw;
++		int r;
++
++		cfg = board_gpio_sw_table + i;
++		if (strlen(cfg->name) > sizeof(sw->name) - 1)
++			return -EINVAL;
++		/* Check whether we only update an existing switch
++		 * or add a new switch. */
++		sw = find_switch(cfg->gpio, cfg->name);
++		if (sw != NULL) {
++			sw->debounce_rising = cfg->debounce_rising;
++			sw->debounce_falling = cfg->debounce_falling;
++			sw->notify = cfg->notify;
++			sw->notify_data = cfg->notify_data;
++			continue;
++		} else {
++			if (cfg->gpio < 0 || cfg->name == NULL) {
++				printk("gpio-switch: required switch not "
++				       "found (%d, %s)\n", cfg->gpio,
++				       cfg->name);
++				continue;
++			}
++		}
++		sw = kzalloc(sizeof(*sw), GFP_KERNEL);
++		if (sw == NULL) {
++			printk(KERN_ERR "gpio-switch: kmalloc failed\n");
++			return -ENOMEM;
++		}
++		strlcpy(sw->name, cfg->name, sizeof(sw->name));
++		sw->gpio = cfg->gpio;
++		sw->flags = cfg->flags;
++		sw->type = cfg->type;
++		sw->debounce_rising = cfg->debounce_rising;
++		sw->debounce_falling = cfg->debounce_falling;
++		sw->notify = cfg->notify;
++		sw->notify_data = cfg->notify_data;
++		if ((r = new_switch(sw)) < 0) {
++			kfree(sw);
++			return r;
++		}
++	}
++	return 0;
++}
++
++static void gpio_sw_cleanup(void)
++{
++	struct gpio_switch *sw = NULL, *old = NULL;
++
++	list_for_each_entry(sw, &gpio_switches, node) {
++		if (old != NULL)
++			kfree(old);
++		flush_scheduled_work();
++		del_timer_sync(&sw->timer);
++
++		free_irq(OMAP_GPIO_IRQ(sw->gpio), sw);
++
++		device_remove_file(&sw->pdev.dev, &dev_attr_state);
++		device_remove_file(&sw->pdev.dev, &dev_attr_type);
++		device_remove_file(&sw->pdev.dev, &dev_attr_direction);
++
++		platform_device_unregister(&sw->pdev);
++		gpio_free(sw->gpio);
++		old = sw;
++	}
++	kfree(old);
++}
++
++static void __init report_initial_state(void)
++{
++	struct gpio_switch *sw;
++
++	list_for_each_entry(sw, &gpio_switches, node) {
++		int state;
++
++		state = gpio_get_value(sw->gpio);
++		if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
++			state = !state;
++		if (sw->notify != NULL)
++			sw->notify(sw->notify_data, state);
++		print_sw_state(sw, state);
++	}
++}
++
++static int gpio_sw_remove(struct platform_device *dev)
++{
++	return 0;
++}
++
++static struct platform_driver gpio_sw_driver = {
++	.remove		= gpio_sw_remove,
++	.driver		= {
++		.name	= "gpio-switch",
++	},
++};
++
++void __init omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
++					int count)
++{
++	BUG_ON(board_gpio_sw_table != NULL);
++
++	board_gpio_sw_table = tbl;
++	board_gpio_sw_count = count;
++}
++
++static int __init gpio_sw_init(void)
++{
++	int r;
++
++	printk(KERN_INFO "OMAP GPIO switch handler initializing\n");
++
++	r = platform_driver_register(&gpio_sw_driver);
++	if (r)
++		return r;
++
++	gpio_sw_platform_dev = platform_device_register_simple("gpio-switch",
++							       -1, NULL, 0);
++	if (IS_ERR(gpio_sw_platform_dev)) {
++		r = PTR_ERR(gpio_sw_platform_dev);
++		goto err1;
++	}
++
++	r = add_atag_switches();
++	if (r < 0)
++		goto err2;
++
++	r = add_board_switches();
++	if (r < 0)
++		goto err2;
++
++	report_initial_state();
++
++	return 0;
++err2:
++	gpio_sw_cleanup();
++	platform_device_unregister(gpio_sw_platform_dev);
++err1:
++	platform_driver_unregister(&gpio_sw_driver);
++	return r;
++}
++
++static void __exit gpio_sw_exit(void)
++{
++	gpio_sw_cleanup();
++	platform_device_unregister(gpio_sw_platform_dev);
++	platform_driver_unregister(&gpio_sw_driver);
++}
++
++#ifndef MODULE
++late_initcall(gpio_sw_init);
++#else
++module_init(gpio_sw_init);
++#endif
++module_exit(gpio_sw_exit);
++
++MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>, Paul Mundt <paul.mundt@nokia.com");
++MODULE_DESCRIPTION("GPIO switch driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/board.h
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/plat-omap/include/plat/board.h	2011-02-25 01:10:25.553127998 +0100
++++ linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/board.h	2011-02-25 01:11:27.301562839 +0100
+@@ -151,6 +151,14 @@
+ 	const void *data;
+ };
+ 
++struct omap_gpio_switch_config {
++	char name[12];
++	u16 gpio;
++	int flags:4;
++	int type:4;
++	int key_code:24; /* Linux key code */
++};
++
+ extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+ 
+ #define omap_get_config(tag, type) \
diff --git a/target/linux/omap24xx/patches-2.6.38/300-nokia-board.patch b/target/linux/omap24xx/patches-2.6.38/300-nokia-board.patch
new file mode 100644
index 0000000000..0a28c0d450
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/300-nokia-board.patch
@@ -0,0 +1,197 @@
+Index: linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0.c
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/mach-omap2/board-n8x0.c	2011-02-24 12:09:31.427080051 +0100
++++ linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0.c	2011-02-24 12:09:59.754956253 +0100
+@@ -15,8 +15,10 @@
+ #include <linux/delay.h>
+ #include <linux/gpio.h>
+ #include <linux/init.h>
++#include <linux/irq.h>
+ #include <linux/io.h>
+ #include <linux/stddef.h>
++#include <linux/platform_device.h>
+ #include <linux/i2c.h>
+ #include <linux/spi/spi.h>
+ #include <linux/usb/musb.h>
+@@ -33,6 +35,7 @@
+ #include <plat/onenand.h>
+ #include <plat/mmc.h>
+ #include <plat/serial.h>
++#include <plat/cbus.h>
+ 
+ #include "mux.h"
+ 
+@@ -194,6 +197,114 @@
+ };
+ #endif
+ 
++#if defined(CONFIG_CBUS) || defined(CONFIG_CBUS_MODULE)
++
++static struct cbus_host_platform_data n8x0_cbus_data = {
++	.clk_gpio	= 66,
++	.dat_gpio	= 65,
++	.sel_gpio	= 64,
++};
++
++static struct platform_device n8x0_cbus_device = {
++	.name		= "cbus",
++	.id		= -1,
++	.dev		= {
++		.platform_data = &n8x0_cbus_data,
++	},
++};
++
++static struct resource retu_resource[] = {
++	{
++		.start	= -EINVAL, /* set later */
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct cbus_retu_platform_data n8x0_retu_data = {
++	.irq_base	= CBUS_RETU_IRQ_BASE,
++	.irq_end	= CBUS_RETU_IRQ_END,
++	.devid		= CBUS_RETU_DEVICE_ID,
++};
++
++static struct platform_device retu_device = {
++	.name		= "retu",
++	.id		= -1,
++	.resource	= retu_resource,
++	.num_resources	= ARRAY_SIZE(retu_resource),
++	.dev		= {
++		.platform_data = &n8x0_retu_data,
++	},
++};
++
++static struct resource tahvo_resource[] = {
++	{
++		.start	= -EINVAL, /* set later */
++		.flags	= IORESOURCE_IRQ,
++	}
++};
++
++static struct platform_device tahvo_device = {
++	.name		= "tahvo",
++	.id		= -1,
++	.resource	= tahvo_resource,
++	.num_resources	= ARRAY_SIZE(tahvo_resource),
++};
++
++static struct platform_device tahvo_usb_device = {
++	.name		= "tahvo-usb",
++	.id		= -1,
++};
++
++static void __init n8x0_cbus_init(void)
++{
++	int		ret;
++
++	platform_device_register(&n8x0_cbus_device);
++
++	ret = gpio_request(108, "RETU irq");
++	if (ret < 0) {
++		pr_err("retu: Unable to reserve IRQ GPIO\n");
++		return;
++	}
++
++	ret = gpio_direction_input(108);
++	if (ret < 0) {
++		pr_err("retu: Unable to change gpio direction\n");
++		gpio_free(108);
++		return;
++	}
++
++	set_irq_type(gpio_to_irq(108), IRQ_TYPE_EDGE_RISING);
++	retu_resource[0].start = gpio_to_irq(108);
++	platform_device_register(&retu_device);
++
++	ret = gpio_request(111, "TAHVO irq");
++	if (ret) {
++		pr_err("tahvo: Unable to reserve IRQ GPIO\n");
++		gpio_free(108);
++		return;
++	}
++
++	/* Set the pin as input */
++	ret = gpio_direction_input(111);
++	if (ret) {
++		pr_err("tahvo: Unable to change direction\n");
++		gpio_free(108);
++		gpio_free(111);
++		return;
++	}
++
++	tahvo_resource[0].start = gpio_to_irq(111);
++	platform_device_register(&tahvo_device);
++	platform_device_register(&tahvo_usb_device);
++}
++
++#else
++static inline void __init n8x0_cbus_init(void)
++{
++}
++#endif
++
+ #if defined(CONFIG_MENELAUS) &&						\
+ 	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
+ 
+@@ -628,11 +739,10 @@
+ 	omap242x_map_common_io();
+ }
+ 
+-static void __init n8x0_init_irq(void)
++static void __init n8x0_init_early(void)
+ {
+ 	omap2_init_common_infrastructure();
+ 	omap2_init_common_devices(NULL, NULL);
+-	omap_init_irq();
+ }
+ 
+ #ifdef CONFIG_OMAP_MUX
+@@ -686,6 +796,8 @@
+ static void __init n8x0_init_machine(void)
+ {
+ 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
++	n8x0_cbus_init();
++
+ 	/* FIXME: add n810 spi devices */
+ 	spi_register_board_info(n800_spi_board_info,
+ 				ARRAY_SIZE(n800_spi_board_info));
+@@ -703,27 +815,30 @@
+ 
+ MACHINE_START(NOKIA_N800, "Nokia N800")
+ 	.boot_params	= 0x80000100,
+-	.map_io		= n8x0_map_io,
+ 	.reserve	= omap_reserve,
+-	.init_irq	= n8x0_init_irq,
++	.map_io		= n8x0_map_io,
++	.init_early	= n8x0_init_early,
++	.init_irq	= omap_init_irq,
+ 	.init_machine	= n8x0_init_machine,
+ 	.timer		= &omap_timer,
+ MACHINE_END
+ 
+ MACHINE_START(NOKIA_N810, "Nokia N810")
+ 	.boot_params	= 0x80000100,
+-	.map_io		= n8x0_map_io,
+ 	.reserve	= omap_reserve,
+-	.init_irq	= n8x0_init_irq,
++	.map_io		= n8x0_map_io,
++	.init_early	= n8x0_init_early,
++	.init_irq	= omap_init_irq,
+ 	.init_machine	= n8x0_init_machine,
+ 	.timer		= &omap_timer,
+ MACHINE_END
+ 
+ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
+ 	.boot_params	= 0x80000100,
+-	.map_io		= n8x0_map_io,
+ 	.reserve	= omap_reserve,
+-	.init_irq	= n8x0_init_irq,
++	.map_io		= n8x0_map_io,
++	.init_early	= n8x0_init_early,
++	.init_irq	= omap_init_irq,
+ 	.init_machine	= n8x0_init_machine,
+ 	.timer		= &omap_timer,
+ MACHINE_END
diff --git a/target/linux/omap24xx/patches-2.6.38/301-nokia-board-additional.patch b/target/linux/omap24xx/patches-2.6.38/301-nokia-board-additional.patch
new file mode 100644
index 0000000000..eed4d5aa89
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/301-nokia-board-additional.patch
@@ -0,0 +1,523 @@
+Index: linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0.c
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/mach-omap2/board-n8x0.c	2011-02-25 01:36:43.691841133 +0100
++++ linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0.c	2011-02-25 01:38:19.129482731 +0100
+@@ -23,6 +23,9 @@
+ #include <linux/spi/spi.h>
+ #include <linux/usb/musb.h>
+ #include <sound/tlv320aic3x.h>
++#include <linux/input.h>
++#include <linux/i2c/lm8323.h>
++#include <linux/spi/tsc2005.h>
+ 
+ #include <asm/mach/arch.h>
+ #include <asm/mach-types.h>
+@@ -36,6 +39,7 @@
+ #include <plat/mmc.h>
+ #include <plat/serial.h>
+ #include <plat/cbus.h>
++#include <plat/gpio-switch.h>
+ 
+ #include "mux.h"
+ 
+@@ -43,6 +47,221 @@
+ static int slot2_cover_open;
+ static struct device *mmc_device;
+ 
++/* We map the FN key as LALT to workaround an X keycode problem.
++ * The XKB map needs to be adjusted to support this. */
++#define MAP_FN_AS_LEFTALT
++
++static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
++	[0x01] = KEY_Q,
++	[0x02] = KEY_K,
++	[0x03] = KEY_O,
++	[0x04] = KEY_P,
++	[0x05] = KEY_BACKSPACE,
++	[0x06] = KEY_A,
++	[0x07] = KEY_S,
++	[0x08] = KEY_D,
++	[0x09] = KEY_F,
++	[0x0a] = KEY_G,
++	[0x0b] = KEY_H,
++	[0x0c] = KEY_J,
++
++	[0x11] = KEY_W,
++	[0x12] = KEY_F4,
++	[0x13] = KEY_L,
++	[0x14] = KEY_APOSTROPHE,
++	[0x16] = KEY_Z,
++	[0x17] = KEY_X,
++	[0x18] = KEY_C,
++	[0x19] = KEY_V,
++	[0x1a] = KEY_B,
++	[0x1b] = KEY_N,
++	[0x1c] = KEY_LEFTSHIFT, /* Actually, this is both shift keys */
++	[0x1f] = KEY_F7,
++
++	[0x21] = KEY_E,
++	[0x22] = KEY_SEMICOLON,
++	[0x23] = KEY_MINUS,
++	[0x24] = KEY_EQUAL,
++#ifdef MAP_FN_AS_LEFTALT
++	[0x2b] = KEY_LEFTALT,
++#else
++	[0x2b] = KEY_FN,
++#endif
++	[0x2c] = KEY_M,
++	[0x2f] = KEY_F8,
++
++	[0x31] = KEY_R,
++	[0x32] = KEY_RIGHTCTRL,
++	[0x34] = KEY_SPACE,
++	[0x35] = KEY_COMMA,
++	[0x37] = KEY_UP,
++	[0x3c] = KEY_COMPOSE,
++	[0x3f] = KEY_F6,
++
++	[0x41] = KEY_T,
++	[0x44] = KEY_DOT,
++	[0x46] = KEY_RIGHT,
++	[0x4f] = KEY_F5,
++	[0x51] = KEY_Y,
++	[0x53] = KEY_DOWN,
++	[0x55] = KEY_ENTER,
++	[0x5f] = KEY_ESC,
++
++	[0x61] = KEY_U,
++	[0x64] = KEY_LEFT,
++
++	[0x71] = KEY_I,
++	[0x75] = KEY_KPENTER,
++};
++
++static struct lm8323_platform_data lm8323_pdata = {
++	.repeat		= 0, /* Repeat is handled in userspace for now. */
++	.keymap		= rx44_keymap,
++	.size_x		= 8,
++	.size_y		= 12,
++	.debounce_time	= 12,
++	.active_time	= 500,
++
++	.name		= "Internal keyboard",
++	.pwm_names[0] 	= "n810::keyboard",
++	.pwm_names[1] 	= "n810::cover",
++};
++
++#define OMAP_TAG_NOKIA_BT	0x4e01
++
++struct omap_bluetooth_config {
++	u8    chip_type;
++	u8    bt_wakeup_gpio;
++	u8    host_wakeup_gpio;
++	u8    reset_gpio;
++	u8    bt_uart;
++	u8    bd_addr[6];
++	u8    bt_sysclk;
++};
++
++static struct platform_device n8x0_bt_device = {
++	.name           = "hci_h4p",
++	.id             = -1,
++	.num_resources  = 0,
++};
++
++void __init n8x0_bt_init(void)
++{
++	const struct omap_bluetooth_config *bt_config;
++
++	bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT,
++					     struct omap_bluetooth_config);
++	n8x0_bt_device.dev.platform_data = (void *) bt_config;
++	if (platform_device_register(&n8x0_bt_device) < 0)
++		BUG();
++}
++
++#define	RX51_TSC2005_RESET_GPIO	94
++#define	RX51_TSC2005_IRQ_GPIO	106
++
++#ifdef CONFIG_TOUCHSCREEN_TSC2005
++static struct tsc2005_platform_data tsc2005_config;
++static void rx51_tsc2005_set_reset(bool enable)
++{
++	gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
++}
++
++static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
++	.turbo_mode	= 0,
++	.single_channel = 1,
++};
++#endif
++
++static void __init tsc2005_set_config(void)
++{
++	const struct omap_lcd_config *conf;
++
++	conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
++	if (conf != NULL) {
++#ifdef CONFIG_TOUCHSCREEN_TSC2005
++		if (strcmp(conf->panel_name, "lph8923") == 0) {
++			tsc2005_config.ts_x_plate_ohm = 180;
++			tsc2005_config.ts_hw_avg = 0;
++			tsc2005_config.ts_ignore_last = 0;
++			tsc2005_config.ts_touch_pressure = 1500;
++			tsc2005_config.ts_stab_time = 100;
++			tsc2005_config.ts_pressure_max = 2048;
++			tsc2005_config.ts_pressure_fudge = 2;
++			tsc2005_config.ts_x_max = 4096;
++			tsc2005_config.ts_x_fudge = 4;
++			tsc2005_config.ts_y_max = 4096;
++			tsc2005_config.ts_y_fudge = 7;
++			tsc2005_config.set_reset = rx51_tsc2005_set_reset;
++		} else if (strcmp(conf->panel_name, "ls041y3") == 0) {
++			tsc2005_config.ts_x_plate_ohm = 280;
++			tsc2005_config.ts_hw_avg = 0;
++			tsc2005_config.ts_ignore_last = 0;
++			tsc2005_config.ts_touch_pressure = 1500;
++			tsc2005_config.ts_stab_time = 1000;
++			tsc2005_config.ts_pressure_max = 2048;
++			tsc2005_config.ts_pressure_fudge = 2;
++			tsc2005_config.ts_x_max = 4096;
++			tsc2005_config.ts_x_fudge = 4;
++			tsc2005_config.ts_y_max = 4096;
++			tsc2005_config.ts_y_fudge = 7;
++			tsc2005_config.set_reset = rx51_tsc2005_set_reset;
++		} else {
++			printk(KERN_ERR "Unknown panel type, set default "
++			       "touchscreen configuration\n");
++			tsc2005_config.ts_x_plate_ohm = 200;
++			tsc2005_config.ts_stab_time = 100;
++		}
++#endif
++	}
++}
++
++static struct omap2_mcspi_device_config mipid_mcspi_config = {
++	.turbo_mode	= 0,
++	.single_channel	= 1,
++};
++
++extern struct mipid_platform_data n8x0_mipid_platform_data;
++
++extern void n8x0_mipid_init(void);
++extern void n8x0_blizzard_init(void);
++
++static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = {
++	{
++		.name			= "headphone",
++		.gpio			= -1,
++		.debounce_rising	= 200,
++		.debounce_falling	= 200,
++	}, {
++		.name			= "cam_act",
++		.gpio			= -1,
++		.debounce_rising	= 200,
++		.debounce_falling	= 200,
++	}, {
++		.name			= "cam_turn",
++		.gpio			= -1,
++		.debounce_rising	= 100,
++		.debounce_falling	= 100,
++	}, {
++		.name			= "slide",
++		.gpio			= -1,
++		.debounce_rising	= 200,
++		.debounce_falling	= 200,
++	}, {
++		.name			= "kb_lock",
++		.gpio			= -1,
++		.debounce_rising	= 200,
++		.debounce_falling	= 200,
++	},
++};
++
++static void __init n8x0_gpio_switches_init(void)
++{
++	/* The switches are actually registered through ATAG mechanism.
++	 * This just updates the parameters (thus .gpio is -1) */
++	omap_register_gpio_switches(n8x0_gpio_switches,
++				    ARRAY_SIZE(n8x0_gpio_switches));
++}
++
+ #define TUSB6010_ASYNC_CS	1
+ #define TUSB6010_SYNC_CS	4
+ #define TUSB6010_GPIO_INT	58
+@@ -146,12 +365,29 @@
+ 
+ static struct spi_board_info n800_spi_board_info[] __initdata = {
+ 	{
++		.modalias	= "lcd_mipid",
++		.bus_num	= 1,
++		.chip_select	= 1,
++		.max_speed_hz	= 4000000,
++		.controller_data= &mipid_mcspi_config,
++		.platform_data	= &n8x0_mipid_platform_data,
++	},
++	{
+ 		.modalias	= "p54spi",
+ 		.bus_num	= 2,
+ 		.chip_select	= 0,
+ 		.max_speed_hz   = 48000000,
+ 		.controller_data = &p54spi_mcspi_config,
+ 	},
++	{
++		.modalias	 = "tsc2005",
++		.bus_num	 = 3,
++		.chip_select	 = 0,
++		.irq		 = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
++		.max_speed_hz    = 6000000,
++		.controller_data = &tsc2005_mcspi_config,
++		.platform_data   = &tsc2005_config,
++	},
+ };
+ 
+ #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+@@ -727,6 +963,11 @@
+ };
+ 
+ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
++ 	{
++		I2C_BOARD_INFO("lm8323", 0x45),
++		.irq		= OMAP_GPIO_IRQ(109),
++		.platform_data	= &lm8323_pdata,
++	},
+ 	{
+ 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+ 		.platform_data = &n810_aic33_data,
+@@ -796,9 +1037,12 @@
+ static void __init n8x0_init_machine(void)
+ {
+ 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
++	n8x0_gpio_switches_init();
+ 	n8x0_cbus_init();
++	n8x0_bt_init();
+ 
+ 	/* FIXME: add n810 spi devices */
++	tsc2005_set_config();
+ 	spi_register_board_info(n800_spi_board_info,
+ 				ARRAY_SIZE(n800_spi_board_info));
+ 	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
+@@ -808,6 +1052,8 @@
+ 		i2c_register_board_info(2, n810_i2c_board_info_2,
+ 					ARRAY_SIZE(n810_i2c_board_info_2));
+ 	board_serial_init();
++	n8x0_mipid_init();
++	n8x0_blizzard_init();
+ 	gpmc_onenand_init(board_onenand_data);
+ 	n8x0_mmc_init();
+ 	n8x0_usb_init();
+Index: linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0-lcd.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0-lcd.c	2011-02-25 01:36:43.715837271 +0100
+@@ -0,0 +1,127 @@
++/*
++ * linux/arch/arm/mach-omap2/board-n8x0.c
++ *
++ * Copyright (C) 2005-2009 Nokia Corporation
++ * Author: Juha Yrjola <juha.yrjola@nokia.com>
++ *
++ * Modified from mach-omap2/board-generic.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/gpio.h>
++#include <linux/omapfb.h>
++
++#include <plat/lcd_mipid.h>
++#include <plat/blizzard.h>
++
++#include <../drivers/cbus/tahvo.h>
++
++#define N8X0_BLIZZARD_POWERDOWN_GPIO	15
++
++// MIPID LCD Panel
++
++static void mipid_shutdown(struct mipid_platform_data *pdata)
++{
++	if (pdata->nreset_gpio != -1) {
++		pr_info("shutdown LCD\n");
++		gpio_set_value(pdata->nreset_gpio, 0);
++		msleep(120);
++	}
++}
++
++struct mipid_platform_data n8x0_mipid_platform_data = {
++	.shutdown = mipid_shutdown,
++};
++
++void __init n8x0_mipid_init(void)
++{
++	const struct omap_lcd_config *conf;
++
++	conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
++	if (conf != NULL) {
++		n8x0_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
++		n8x0_mipid_platform_data.data_lines = conf->data_lines;
++		printk(KERN_INFO "N8x0 MIPID config loaded");
++	}
++	else
++		printk(KERN_INFO "N8x0 MIPID config not provided");
++}
++
++
++// Epson Blizzard LCD Controller
++
++static struct {
++	struct clk *sys_ck;
++} blizzard;
++
++static int blizzard_get_clocks(void)
++{
++	blizzard.sys_ck = clk_get(0, "osc_ck");
++	if (IS_ERR(blizzard.sys_ck)) {
++		printk(KERN_ERR "can't get Blizzard clock\n");
++		return PTR_ERR(blizzard.sys_ck);
++	}
++	return 0;
++}
++
++static unsigned long blizzard_get_clock_rate(struct device *dev)
++{
++	return clk_get_rate(blizzard.sys_ck);
++}
++
++static void blizzard_enable_clocks(int enable)
++{
++	if (enable)
++		clk_enable(blizzard.sys_ck);
++	else
++		clk_disable(blizzard.sys_ck);
++}
++
++static void blizzard_power_up(struct device *dev)
++{
++	/* Vcore to 1.475V */
++	tahvo_set_clear_reg_bits(0x07, 0, 0xf);
++	msleep(10);
++
++	blizzard_enable_clocks(1);
++	gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
++}
++
++static void blizzard_power_down(struct device *dev)
++{
++	gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 0);
++	blizzard_enable_clocks(0);
++
++	/* Vcore to 1.005V */
++	tahvo_set_clear_reg_bits(0x07, 0xf, 0);
++}
++
++static struct blizzard_platform_data n8x0_blizzard_data = {
++	.power_up	= blizzard_power_up,
++	.power_down	= blizzard_power_down,
++	.get_clock_rate	= blizzard_get_clock_rate,
++	.te_connected	= 1,
++};
++
++void __init n8x0_blizzard_init(void)
++{
++	int r;
++
++	r = gpio_request(N8X0_BLIZZARD_POWERDOWN_GPIO, "Blizzard pd");
++	if (r < 0)
++	{
++		printk(KERN_ERR "Can't get N8x0 Blizzard powerdown GPIO %d\n", N8X0_BLIZZARD_POWERDOWN_GPIO);
++		return;
++	}
++	gpio_direction_output(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
++
++	blizzard_get_clocks();
++	omapfb_set_ctrl_platform_data(&n8x0_blizzard_data);
++
++	printk(KERN_INFO "N8x0 Blizzard initialized");
++}
+Index: linux-2.6.38-rc6/arch/arm/mach-omap2/Makefile
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/mach-omap2/Makefile	2011-02-25 01:36:11.764976272 +0100
++++ linux-2.6.38-rc6/arch/arm/mach-omap2/Makefile	2011-02-25 01:36:43.715837271 +0100
+@@ -177,6 +177,7 @@
+ 					   hsmmc.o \
+ 					   board-flash.o
+ obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
++obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0-lcd.o
+ obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
+ 					   sdram-nokia.o \
+ 					   hsmmc.o
+Index: linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/cbus.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/cbus.h	2011-02-25 01:36:43.716837110 +0100
+@@ -0,0 +1,40 @@
++/*
++ * cbus.h - CBUS platform_data definition
++ *
++ * Copyright (C) 2004 - 2009 Nokia Corporation
++ *
++ * Written by Felipe Balbi <felipe.balbi@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __PLAT_CBUS_H
++#define __PLAT_CBUS_H
++
++#define CBUS_RETU_DEVICE_ID	0x01
++#define CBUS_TAHVO_DEVICE_ID	0x02
++
++struct cbus_host_platform_data {
++	int	dat_gpio;
++	int	clk_gpio;
++	int	sel_gpio;
++};
++
++struct cbus_retu_platform_data {
++	int	irq_base;
++	int	irq_end;
++	int	devid;
++};
++
++#endif /* __PLAT_CBUS_H */
+Index: linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/irqs.h
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/plat-omap/include/plat/irqs.h	2011-02-25 01:36:11.794971452 +0100
++++ linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/irqs.h	2011-02-25 01:36:43.716837110 +0100
+@@ -411,7 +411,20 @@
+ #define TWL_IRQ_END		TWL6030_IRQ_END
+ #endif
+ 
+-#define NR_IRQS			TWL_IRQ_END
++/* GPMC related */
++#define OMAP_GPMC_IRQ_BASE	(TWL_IRQ_END)
++#define OMAP_GPMC_NR_IRQS	7
++#define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
++
++#define CBUS_RETU_IRQ_BASE	OMAP_GPMC_IRQ_END
++#ifdef CONFIG_CBUS_RETU
++#define CBUS_RETU_NR_IRQS	16
++#else
++#define CBUS_RETU_NR_IRQS	0
++#endif
++#define CBUS_RETU_IRQ_END	(CBUS_RETU_IRQ_BASE + CBUS_RETU_NR_IRQS)
++
++#define NR_IRQS			CBUS_RETU_IRQ_END
+ 
+ #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+ 
diff --git a/target/linux/omap24xx/patches-2.6.38/310-n8x0-gpioswitch-input.patch b/target/linux/omap24xx/patches-2.6.38/310-n8x0-gpioswitch-input.patch
new file mode 100644
index 0000000000..ea41babc6f
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/310-n8x0-gpioswitch-input.patch
@@ -0,0 +1,100 @@
+---
+ arch/arm/mach-omap2/board-n8x0.c |   73 +++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 73 insertions(+)
+
+Index: linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0.c
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/mach-omap2/board-n8x0.c	2011-02-24 12:53:05.134457636 +0100
++++ linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0.c	2011-02-24 12:55:54.570320630 +0100
+@@ -225,6 +225,77 @@
+ extern void n8x0_mipid_init(void);
+ extern void n8x0_blizzard_init(void);
+ 
++struct gpio_switch_input_dev {
++	struct input_dev *idev;
++	unsigned int swcode;
++};
++
++static struct gpio_switch_input_dev *slide_input;
++static struct gpio_switch_input_dev *kblock_input;
++
++static void n8x0_gpio_switch_input_notify(struct gpio_switch_input_dev *gdev,
++					  int state)
++{
++	if (gdev) {
++		input_report_switch(gdev->idev, gdev->swcode, state);
++		input_sync(gdev->idev);
++	}
++}
++
++static void n8x0_slide_notify(void *data, int state)
++{
++	n8x0_gpio_switch_input_notify(slide_input, state);
++}
++
++static void n8x0_kb_lock_notify(void *data, int state)
++{
++	n8x0_gpio_switch_input_notify(kblock_input, state);
++}
++
++static struct gpio_switch_input_dev * __init gpioswitch_input_init(
++			const char *name,
++			unsigned int swcode)
++{
++	struct gpio_switch_input_dev *gdev;
++	int err;
++
++	gdev = kzalloc(sizeof(*gdev), GFP_KERNEL);
++	if (!gdev)
++		goto error;
++	gdev->swcode = swcode;
++
++	gdev->idev = input_allocate_device();
++	if (!gdev->idev)
++		goto err_free;
++
++	gdev->idev->evbit[0] = BIT_MASK(EV_SW);
++	gdev->idev->swbit[BIT_WORD(swcode)] = BIT_MASK(swcode);
++	gdev->idev->name = name;
++
++	err = input_register_device(gdev->idev);
++	if (err)
++		goto err_free_idev;
++
++	return gdev;
++
++err_free_idev:
++	input_free_device(gdev->idev);
++err_free:
++	kfree(gdev);
++error:
++	return NULL;
++}
++
++static int __init n8x0_gpio_switches_input_init(void)
++{
++	slide_input = gpioswitch_input_init("slide", SW_KEYPAD_SLIDE);
++	kblock_input = gpioswitch_input_init("kb_lock", SW_LID);
++	if (WARN_ON(!slide_input || !kblock_input))
++		return -ENODEV;
++	return 0;
++}
++late_initcall(n8x0_gpio_switches_input_init);
++
+ static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = {
+ 	{
+ 		.name			= "headphone",
+@@ -246,11 +317,13 @@
+ 		.gpio			= -1,
+ 		.debounce_rising	= 200,
+ 		.debounce_falling	= 200,
++		.notify			= n8x0_slide_notify,
+ 	}, {
+ 		.name			= "kb_lock",
+ 		.gpio			= -1,
+ 		.debounce_rising	= 200,
+ 		.debounce_falling	= 200,
++		.notify			= n8x0_kb_lock_notify,
+ 	},
+ };
+ 
diff --git a/target/linux/omap24xx/patches-2.6.38/400-bluetooth-hci_h4p.patch b/target/linux/omap24xx/patches-2.6.38/400-bluetooth-hci_h4p.patch
new file mode 100644
index 0000000000..98ecc0e6af
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/400-bluetooth-hci_h4p.patch
@@ -0,0 +1,1966 @@
+---
+ drivers/bluetooth/Kconfig           |   10 
+ drivers/bluetooth/Makefile          |    1 
+ drivers/bluetooth/hci_h4p/Makefile  |    7 
+ drivers/bluetooth/hci_h4p/core.c    | 1043 ++++++++++++++++++++++++++++++++++++
+ drivers/bluetooth/hci_h4p/fw-csr.c  |  149 +++++
+ drivers/bluetooth/hci_h4p/fw-ti.c   |   90 +++
+ drivers/bluetooth/hci_h4p/fw.c      |  155 +++++
+ drivers/bluetooth/hci_h4p/hci_h4p.h |  183 ++++++
+ drivers/bluetooth/hci_h4p/sysfs.c   |   84 ++
+ drivers/bluetooth/hci_h4p/uart.c    |  169 +++++
+ 10 files changed, 1891 insertions(+)
+
+Index: linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/core.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/core.c	2010-11-05 17:04:44.762000001 +0100
+@@ -0,0 +1,1043 @@
++/*
++ * This file is part of hci_h4p bluetooth driver
++ *
++ * Copyright (C) 2005, 2006 Nokia Corporation.
++ *
++ * Contact: Ville Tervo <ville.tervo@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/module.h>
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/serial_reg.h>
++#include <linux/skbuff.h>
++#include <linux/timer.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/gpio.h>
++
++#include <mach/hardware.h>
++#include <mach/board.h>
++#include <mach/irqs.h>
++#include <plat/serial.h>
++
++#include <net/bluetooth/bluetooth.h>
++#include <net/bluetooth/hci_core.h>
++#include <net/bluetooth/hci.h>
++
++#include "hci_h4p.h"
++
++#define PM_TIMEOUT 200
++
++struct omap_bluetooth_config {
++	u8    chip_type;
++	u8    bt_wakeup_gpio;
++	u8    host_wakeup_gpio;
++	u8    reset_gpio;
++	u8    bt_uart;
++	u8    bd_addr[6];
++	u8    bt_sysclk;
++};
++
++/* This should be used in function that cannot release clocks */
++static void hci_h4p_set_clk(struct hci_h4p_info *info, int *clock, int enable)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&info->clocks_lock, flags);
++	if (enable && !*clock) {
++		NBT_DBG_POWER("Enabling %p\n", clock);
++		clk_enable(info->uart_fclk);
++#ifdef CONFIG_ARCH_OMAP2
++		if (cpu_is_omap24xx()) {
++			clk_enable(info->uart_iclk);
++			//omap2_block_sleep();
++		}
++#endif
++	}
++	if (!enable && *clock) {
++		NBT_DBG_POWER("Disabling %p\n", clock);
++		clk_disable(info->uart_fclk);
++#ifdef CONFIG_ARCH_OMAP2
++		if (cpu_is_omap24xx()) {
++			clk_disable(info->uart_iclk);
++			//omap2_allow_sleep();
++		}
++#endif
++	}
++
++	*clock = enable;
++	spin_unlock_irqrestore(&info->clocks_lock, flags);
++}
++
++/* Power management functions */
++static void hci_h4p_disable_tx(struct hci_h4p_info *info)
++{
++	NBT_DBG_POWER("\n");
++
++	if (!info->pm_enabled)
++		return;
++
++	mod_timer(&info->tx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
++}
++
++static void hci_h4p_enable_tx(struct hci_h4p_info *info)
++{
++	NBT_DBG_POWER("\n");
++
++	if (!info->pm_enabled)
++		return;
++
++	del_timer_sync(&info->tx_pm_timer);
++	if (info->tx_pm_enabled) {
++		info->tx_pm_enabled = 0;
++		hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
++		gpio_set_value(info->bt_wakeup_gpio, 1);
++	}
++}
++
++static void hci_h4p_tx_pm_timer(unsigned long data)
++{
++	struct hci_h4p_info *info;
++
++	NBT_DBG_POWER("\n");
++
++	info = (struct hci_h4p_info *)data;
++
++	if (hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT) {
++		gpio_set_value(info->bt_wakeup_gpio, 0);
++		hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
++		info->tx_pm_enabled = 1;
++	}
++	else {
++		mod_timer(&info->tx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
++	}
++}
++
++static void hci_h4p_disable_rx(struct hci_h4p_info *info)
++{
++	if (!info->pm_enabled)
++		return;
++
++	mod_timer(&info->rx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
++}
++
++static void hci_h4p_enable_rx(struct hci_h4p_info *info)
++{
++	unsigned long flags;
++
++	if (!info->pm_enabled)
++		return;
++
++	del_timer_sync(&info->rx_pm_timer);
++	spin_lock_irqsave(&info->lock, flags);
++	if (info->rx_pm_enabled) {
++		hci_h4p_set_clk(info, &info->rx_clocks_en, 1);
++		hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_RDI);
++		__hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS);
++		info->rx_pm_enabled = 0;
++	}
++	spin_unlock_irqrestore(&info->lock, flags);
++}
++
++static void hci_h4p_rx_pm_timer(unsigned long data)
++{
++	unsigned long flags;
++	struct hci_h4p_info *info = (struct hci_h4p_info *)data;
++
++	spin_lock_irqsave(&info->lock, flags);
++	if (!(hci_h4p_inb(info, UART_LSR) & UART_LSR_DR)) {
++		__hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS);
++		hci_h4p_set_rts(info, 0);
++		hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_RDI);
++		hci_h4p_set_clk(info, &info->rx_clocks_en, 0);
++		info->rx_pm_enabled = 1;
++	}
++	else {
++		mod_timer(&info->rx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
++	}
++	spin_unlock_irqrestore(&info->lock, flags);
++}
++
++/* Negotiation functions */
++int hci_h4p_send_alive_packet(struct hci_h4p_info *info)
++{
++	NBT_DBG("Sending alive packet\n");
++
++	if (!info->alive_cmd_skb)
++		return -EINVAL;
++
++	/* Keep reference to buffer so we can reuse it */
++	info->alive_cmd_skb = skb_get(info->alive_cmd_skb);
++
++	skb_queue_tail(&info->txq, info->alive_cmd_skb);
++	tasklet_schedule(&info->tx_task);
++
++	NBT_DBG("Alive packet sent\n");
++
++	return 0;
++}
++
++static void hci_h4p_alive_packet(struct hci_h4p_info *info, struct sk_buff *skb)
++{
++	NBT_DBG("Received alive packet\n");
++	if (skb->data[1] == 0xCC) {
++		complete(&info->init_completion);
++	}
++
++	kfree_skb(skb);
++}
++
++static int hci_h4p_send_negotiation(struct hci_h4p_info *info, struct sk_buff *skb)
++{
++	NBT_DBG("Sending negotiation..\n");
++
++	hci_h4p_change_speed(info, INIT_SPEED);
++
++	info->init_error = 0;
++	init_completion(&info->init_completion);
++	skb_queue_tail(&info->txq, skb);
++	tasklet_schedule(&info->tx_task);
++
++	if (!wait_for_completion_interruptible_timeout(&info->init_completion,
++				msecs_to_jiffies(1000)))
++		return -ETIMEDOUT;
++
++	NBT_DBG("Negotiation sent\n");
++	return info->init_error;
++}
++
++static void hci_h4p_negotiation_packet(struct hci_h4p_info *info,
++				       struct sk_buff *skb)
++{
++	int err = 0;
++
++	if (skb->data[1] == 0x20) {
++		/* Change to operational settings */
++		hci_h4p_set_rts(info, 0);
++
++		err = hci_h4p_wait_for_cts(info, 0, 100);
++		if (err < 0)
++			goto neg_ret;
++
++		hci_h4p_change_speed(info, MAX_BAUD_RATE);
++
++		err = hci_h4p_wait_for_cts(info, 1, 100);
++		if (err < 0)
++			goto neg_ret;
++
++		hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_CTS | UART_EFR_RTS);
++
++		err = hci_h4p_send_alive_packet(info);
++		if (err < 0)
++			goto neg_ret;
++	} else {
++		dev_err(info->dev, "Could not negotiate hci_h4p settings\n");
++		err = -EINVAL;
++		goto neg_ret;
++	}
++
++	kfree_skb(skb);
++	return;
++
++neg_ret:
++	info->init_error = err;
++	complete(&info->init_completion);
++	kfree_skb(skb);
++}
++
++/* H4 packet handling functions */
++static int hci_h4p_get_hdr_len(struct hci_h4p_info *info, u8 pkt_type)
++{
++	long retval;
++
++	switch (pkt_type) {
++	case H4_EVT_PKT:
++		retval = HCI_EVENT_HDR_SIZE;
++		break;
++	case H4_ACL_PKT:
++		retval = HCI_ACL_HDR_SIZE;
++		break;
++	case H4_SCO_PKT:
++		retval = HCI_SCO_HDR_SIZE;
++		break;
++	case H4_NEG_PKT:
++		retval = 11;
++		break;
++	case H4_ALIVE_PKT:
++		retval = 3;
++		break;
++	default:
++		dev_err(info->dev, "Unknown H4 packet type 0x%.2x\n", pkt_type);
++		retval = -1;
++		break;
++	}
++
++	return retval;
++}
++
++static unsigned int hci_h4p_get_data_len(struct hci_h4p_info *info,
++					 struct sk_buff *skb)
++{
++	long retval = -1;
++	struct hci_event_hdr *evt_hdr;
++	struct hci_acl_hdr *acl_hdr;
++	struct hci_sco_hdr *sco_hdr;
++
++	switch (bt_cb(skb)->pkt_type) {
++	case H4_EVT_PKT:
++		evt_hdr = (struct hci_event_hdr *)skb->data;
++		retval = evt_hdr->plen;
++		break;
++	case H4_ACL_PKT:
++		acl_hdr = (struct hci_acl_hdr *)skb->data;
++		retval = le16_to_cpu(acl_hdr->dlen);
++		break;
++	case H4_SCO_PKT:
++		sco_hdr = (struct hci_sco_hdr *)skb->data;
++		retval = sco_hdr->dlen;
++		break;
++	case H4_NEG_PKT:
++		retval = 0;
++		break;
++	case H4_ALIVE_PKT:
++		retval = 0;
++		break;
++	}
++
++	return retval;
++}
++
++static inline void hci_h4p_recv_frame(struct hci_h4p_info *info,
++				      struct sk_buff *skb)
++{
++
++	if (unlikely(!test_bit(HCI_RUNNING, &info->hdev->flags))) {
++		NBT_DBG("fw_event\n");
++		hci_h4p_parse_fw_event(info, skb);
++	} else {
++		hci_recv_frame(skb);
++		NBT_DBG("Frame sent to upper layer\n");
++	}
++}
++
++static void hci_h4p_rx_tasklet(unsigned long data)
++{
++	u8 byte;
++	unsigned long flags;
++	struct hci_h4p_info *info = (struct hci_h4p_info *)data;
++
++	NBT_DBG("tasklet woke up\n");
++	NBT_DBG_TRANSFER("rx_tasklet woke up\ndata ");
++
++	while (hci_h4p_inb(info, UART_LSR) & UART_LSR_DR) {
++		byte = hci_h4p_inb(info, UART_RX);
++		if (info->garbage_bytes) {
++			info->garbage_bytes--;
++			continue;
++		}
++		if (info->rx_skb == NULL) {
++			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC | GFP_DMA);
++			if (!info->rx_skb) {
++				dev_err(info->dev, "Can't allocate memory for new packet\n");
++				goto finish_task;
++			}
++			info->rx_state = WAIT_FOR_PKT_TYPE;
++			info->rx_skb->dev = (void *)info->hdev;
++		}
++		info->hdev->stat.byte_rx++;
++		NBT_DBG_TRANSFER_NF("0x%.2x  ", byte);
++		switch (info->rx_state) {
++		case WAIT_FOR_PKT_TYPE:
++			bt_cb(info->rx_skb)->pkt_type = byte;
++			info->rx_count = hci_h4p_get_hdr_len(info, byte);
++			if (info->rx_count < 0) {
++				info->hdev->stat.err_rx++;
++				kfree_skb(info->rx_skb);
++				info->rx_skb = NULL;
++			} else {
++				info->rx_state = WAIT_FOR_HEADER;
++			}
++			break;
++		case WAIT_FOR_HEADER:
++			info->rx_count--;
++			*skb_put(info->rx_skb, 1) = byte;
++			if (info->rx_count == 0) {
++				info->rx_count = hci_h4p_get_data_len(info, info->rx_skb);
++				if (info->rx_count > skb_tailroom(info->rx_skb)) {
++					dev_err(info->dev, "Frame is %ld bytes too long.\n",
++					       info->rx_count - skb_tailroom(info->rx_skb));
++					kfree_skb(info->rx_skb);
++					info->rx_skb = NULL;
++					info->garbage_bytes = info->rx_count - skb_tailroom(info->rx_skb);
++					break;
++				}
++				info->rx_state = WAIT_FOR_DATA;
++
++				if (bt_cb(info->rx_skb)->pkt_type == H4_NEG_PKT) {
++					hci_h4p_negotiation_packet(info, info->rx_skb);
++					info->rx_skb = NULL;
++					info->rx_state = WAIT_FOR_PKT_TYPE;
++					goto finish_task;
++				}
++				if (bt_cb(info->rx_skb)->pkt_type == H4_ALIVE_PKT) {
++					hci_h4p_alive_packet(info, info->rx_skb);
++					info->rx_skb = NULL;
++					info->rx_state = WAIT_FOR_PKT_TYPE;
++					goto finish_task;
++				}
++			}
++			break;
++		case WAIT_FOR_DATA:
++			info->rx_count--;
++			*skb_put(info->rx_skb, 1) = byte;
++			if (info->rx_count == 0) {
++				/* H4+ devices should allways send word aligned packets */
++				if (!(info->rx_skb->len % 2)) {
++					info->garbage_bytes++;
++				}
++				hci_h4p_recv_frame(info, info->rx_skb);
++				info->rx_skb = NULL;
++			}
++			break;
++		default:
++			WARN_ON(1);
++			break;
++		}
++	}
++
++finish_task:
++	spin_lock_irqsave(&info->lock, flags);
++	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_RDI);
++	spin_unlock_irqrestore(&info->lock, flags);
++
++	NBT_DBG_TRANSFER_NF("\n");
++	NBT_DBG("rx_ended\n");
++}
++
++static void hci_h4p_tx_tasklet(unsigned long data)
++{
++	unsigned int sent = 0;
++	unsigned long flags;
++	struct sk_buff *skb;
++	struct hci_h4p_info *info = (struct hci_h4p_info *)data;
++
++	NBT_DBG("tasklet woke up\n");
++	NBT_DBG_TRANSFER("tx_tasklet woke up\n data ");
++
++	skb = skb_dequeue(&info->txq);
++	if (!skb) {
++		/* No data in buffer */
++		NBT_DBG("skb ready\n");
++		hci_h4p_disable_tx(info);
++		return;
++	}
++
++	/* Copy data to tx fifo */
++	while (!(hci_h4p_inb(info, UART_OMAP_SSR) & UART_OMAP_SSR_TXFULL) &&
++	       (sent < skb->len)) {
++		NBT_DBG_TRANSFER_NF("0x%.2x ", skb->data[sent]);
++		hci_h4p_outb(info, UART_TX, skb->data[sent]);
++		sent++;
++	}
++
++	info->hdev->stat.byte_tx += sent;
++	NBT_DBG_TRANSFER_NF("\n");
++	if (skb->len == sent) {
++		kfree_skb(skb);
++	} else {
++		skb_pull(skb, sent);
++		skb_queue_head(&info->txq, skb);
++	}
++
++	spin_lock_irqsave(&info->lock, flags);
++	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_THRI);
++	spin_unlock_irqrestore(&info->lock, flags);
++}
++
++static irqreturn_t hci_h4p_interrupt(int irq, void *data)
++{
++	struct hci_h4p_info *info = (struct hci_h4p_info *)data;
++	u8 iir, msr;
++	int ret;
++	unsigned long flags;
++
++	ret = IRQ_NONE;
++
++	iir = hci_h4p_inb(info, UART_IIR);
++	if (iir & UART_IIR_NO_INT) {
++		dev_err(info->dev, "Interrupt but no reason irq 0x%.2x\n", iir);
++		return IRQ_HANDLED;
++	}
++
++	NBT_DBG("In interrupt handler iir 0x%.2x\n", iir);
++
++	iir &= UART_IIR_ID;
++
++	if (iir == UART_IIR_MSI) {
++		msr = hci_h4p_inb(info, UART_MSR);
++		ret = IRQ_HANDLED;
++	}
++	if (iir == UART_IIR_RLSI) {
++		hci_h4p_inb(info, UART_RX);
++		hci_h4p_inb(info, UART_LSR);
++		ret = IRQ_HANDLED;
++	}
++
++	if (iir == UART_IIR_RDI) {
++		spin_lock_irqsave(&info->lock, flags);
++		hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_RDI);
++		spin_unlock_irqrestore(&info->lock, flags);
++		tasklet_schedule(&info->rx_task);
++		ret = IRQ_HANDLED;
++	}
++
++	if (iir == UART_IIR_THRI) {
++		spin_lock_irqsave(&info->lock, flags);
++		hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_THRI);
++		spin_unlock_irqrestore(&info->lock, flags);
++		tasklet_schedule(&info->tx_task);
++		ret = IRQ_HANDLED;
++	}
++
++	return ret;
++}
++
++static irqreturn_t hci_h4p_wakeup_interrupt(int irq, void *dev_inst)
++{
++	struct hci_h4p_info *info = dev_inst;
++	int should_wakeup;
++	struct hci_dev *hdev;
++
++	if (!info->hdev)
++		return IRQ_HANDLED;
++
++	hdev = info->hdev;
++
++	if (!test_bit(HCI_RUNNING, &hdev->flags))
++		return IRQ_HANDLED;
++
++	should_wakeup = gpio_get_value(info->host_wakeup_gpio);
++	NBT_DBG_POWER("gpio interrupt %d\n", should_wakeup);
++	if (should_wakeup) {
++		hci_h4p_enable_rx(info);
++	} else {
++		hci_h4p_disable_rx(info);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int hci_h4p_reset(struct hci_h4p_info *info)
++{
++	int err;
++
++	hci_h4p_init_uart(info);
++	hci_h4p_set_rts(info, 0);
++
++	gpio_set_value(info->reset_gpio, 0);
++	msleep(100);
++	gpio_set_value(info->bt_wakeup_gpio, 1);
++	gpio_set_value(info->reset_gpio, 1);
++	msleep(100);
++
++	err = hci_h4p_wait_for_cts(info, 1, 10);
++	if (err < 0) {
++		dev_err(info->dev, "No cts from bt chip\n");
++		return err;
++	}
++
++	hci_h4p_set_rts(info, 1);
++
++	return 0;
++}
++
++/* hci callback functions */
++static int hci_h4p_hci_flush(struct hci_dev *hdev)
++{
++	struct hci_h4p_info *info;
++	info = hdev->driver_data;
++
++	skb_queue_purge(&info->txq);
++
++	return 0;
++}
++
++static int hci_h4p_hci_open(struct hci_dev *hdev)
++{
++	struct hci_h4p_info *info;
++	int err;
++	struct sk_buff *neg_cmd_skb;
++	struct sk_buff_head fw_queue;
++
++	info = hdev->driver_data;
++
++	if (test_bit(HCI_RUNNING, &hdev->flags))
++		return 0;
++
++	skb_queue_head_init(&fw_queue);
++	err = hci_h4p_read_fw(info, &fw_queue);
++	if (err < 0) {
++		dev_err(info->dev, "Cannot read firmware\n");
++		return err;
++	}
++	neg_cmd_skb = skb_dequeue(&fw_queue);
++	if (!neg_cmd_skb) {
++		err = -EPROTO;
++		goto err_clean;
++	}
++	info->alive_cmd_skb = skb_dequeue(&fw_queue);
++	if (!info->alive_cmd_skb) {
++		err = -EPROTO;
++		goto err_clean;
++	}
++
++	hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
++	hci_h4p_set_clk(info, &info->rx_clocks_en, 1);
++
++	tasklet_enable(&info->tx_task);
++	tasklet_enable(&info->rx_task);
++	info->rx_state = WAIT_FOR_PKT_TYPE;
++	info->rx_count = 0;
++	info->garbage_bytes = 0;
++	info->rx_skb = NULL;
++	info->pm_enabled = 0;
++	init_completion(&info->fw_completion);
++
++	err = hci_h4p_reset(info);
++	if (err < 0)
++		goto err_clean;
++
++	err = hci_h4p_send_negotiation(info, neg_cmd_skb);
++	neg_cmd_skb = NULL;
++	if (err < 0)
++		goto err_clean;
++
++	err = hci_h4p_send_fw(info, &fw_queue);
++	if (err < 0) {
++		dev_err(info->dev, "Sending firmware failed.\n");
++		goto err_clean;
++	}
++
++	kfree_skb(info->alive_cmd_skb);
++	info->alive_cmd_skb = NULL;
++	info->pm_enabled = 1;
++	info->tx_pm_enabled = 1;
++	info->rx_pm_enabled = 0;
++	set_bit(HCI_RUNNING, &hdev->flags);
++
++	NBT_DBG("hci up and running\n");
++	return 0;
++
++err_clean:
++	hci_h4p_hci_flush(hdev);
++	tasklet_disable(&info->tx_task);
++	tasklet_disable(&info->rx_task);
++	hci_h4p_reset_uart(info);
++	hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
++	hci_h4p_set_clk(info, &info->rx_clocks_en, 0);
++	gpio_set_value(info->reset_gpio, 0);
++	gpio_set_value(info->bt_wakeup_gpio, 0);
++	skb_queue_purge(&fw_queue);
++	kfree_skb(neg_cmd_skb);
++	neg_cmd_skb = NULL;
++	kfree_skb(info->alive_cmd_skb);
++	info->alive_cmd_skb = NULL;
++	kfree_skb(info->rx_skb);
++
++	return err;
++}
++
++static int hci_h4p_hci_close(struct hci_dev *hdev)
++{
++	struct hci_h4p_info *info = hdev->driver_data;
++
++	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
++		return 0;
++
++	hci_h4p_hci_flush(hdev);
++	del_timer_sync(&info->tx_pm_timer);
++	del_timer_sync(&info->rx_pm_timer);
++	tasklet_disable(&info->tx_task);
++	tasklet_disable(&info->rx_task);
++	hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
++	hci_h4p_set_clk(info, &info->rx_clocks_en, 1);
++	hci_h4p_reset_uart(info);
++	hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
++	hci_h4p_set_clk(info, &info->rx_clocks_en, 0);
++	gpio_set_value(info->reset_gpio, 0);
++	gpio_set_value(info->bt_wakeup_gpio, 0);
++	kfree_skb(info->rx_skb);
++
++	return 0;
++}
++
++static void hci_h4p_hci_destruct(struct hci_dev *hdev)
++{
++}
++
++static int hci_h4p_hci_send_frame(struct sk_buff *skb)
++{
++	struct hci_h4p_info *info;
++	struct hci_dev *hdev = (struct hci_dev *)skb->dev;
++	int err = 0;
++
++	if (!hdev) {
++		printk(KERN_WARNING "hci_h4p: Frame for unknown device\n");
++		return -ENODEV;
++	}
++
++	NBT_DBG("dev %p, skb %p\n", hdev, skb);
++
++	info = hdev->driver_data;
++
++	if (!test_bit(HCI_RUNNING, &hdev->flags)) {
++		dev_warn(info->dev, "Frame for non-running device\n");
++		return -EIO;
++	}
++
++	switch (bt_cb(skb)->pkt_type) {
++	case HCI_COMMAND_PKT:
++		hdev->stat.cmd_tx++;
++		break;
++	case HCI_ACLDATA_PKT:
++		hdev->stat.acl_tx++;
++		break;
++	case HCI_SCODATA_PKT:
++		hdev->stat.sco_tx++;
++		break;
++	}
++
++	/* Push frame type to skb */
++	*skb_push(skb, 1) = (bt_cb(skb)->pkt_type);
++	/* We should allways send word aligned data to h4+ devices */
++	if (skb->len % 2) {
++		err = skb_pad(skb, 1);
++	}
++	if (err)
++		return err;
++
++	hci_h4p_enable_tx(info);
++	skb_queue_tail(&info->txq, skb);
++	tasklet_schedule(&info->tx_task);
++
++	return 0;
++}
++
++static int hci_h4p_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
++{
++	return -ENOIOCTLCMD;
++}
++
++static int hci_h4p_register_hdev(struct hci_h4p_info *info)
++{
++	struct hci_dev *hdev;
++
++	/* Initialize and register HCI device */
++
++	hdev = hci_alloc_dev();
++	if (!hdev) {
++		dev_err(info->dev, "Can't allocate memory for device\n");
++		return -ENOMEM;
++	}
++	info->hdev = hdev;
++
++	hdev->dev_type = HCI_UART;
++	hdev->driver_data = info;
++
++	hdev->open = hci_h4p_hci_open;
++	hdev->close = hci_h4p_hci_close;
++	hdev->flush = hci_h4p_hci_flush;
++	hdev->send = hci_h4p_hci_send_frame;
++	hdev->destruct = hci_h4p_hci_destruct;
++	hdev->ioctl = hci_h4p_hci_ioctl;
++
++	hdev->owner = THIS_MODULE;
++
++	if (hci_register_dev(hdev) < 0) {
++		dev_err(info->dev, "hci_h4p: Can't register HCI device %s.\n", hdev->name);
++		return -ENODEV;
++	}
++
++	return 0;
++}
++
++static int hci_h4p_probe(struct platform_device *pdev)
++{
++	struct omap_bluetooth_config *bt_config;
++	struct hci_h4p_info *info;
++	int irq, err;
++
++	dev_info(&pdev->dev, "Registering HCI H4P device\n");
++	info = kzalloc(sizeof(struct hci_h4p_info), GFP_KERNEL);
++	if (!info)
++		return -ENOMEM;
++
++	info->dev = &pdev->dev;
++	info->pm_enabled = 0;
++	info->tx_pm_enabled = 0;
++	info->rx_pm_enabled = 0;
++	info->garbage_bytes = 0;
++	info->tx_clocks_en = 0;
++	info->rx_clocks_en = 0;
++	tasklet_init(&info->tx_task, hci_h4p_tx_tasklet, (unsigned long)info);
++	tasklet_init(&info->rx_task, hci_h4p_rx_tasklet, (unsigned long)info);
++	/* hci_h4p_hci_open assumes that tasklet is disabled in startup */
++	tasklet_disable(&info->tx_task);
++	tasklet_disable(&info->rx_task);
++	spin_lock_init(&info->lock);
++	spin_lock_init(&info->clocks_lock);
++	skb_queue_head_init(&info->txq);
++	init_timer(&info->tx_pm_timer);
++	info->tx_pm_timer.function = hci_h4p_tx_pm_timer;
++	info->tx_pm_timer.data = (unsigned long)info;
++	init_timer(&info->rx_pm_timer);
++	info->rx_pm_timer.function = hci_h4p_rx_pm_timer;
++	info->rx_pm_timer.data = (unsigned long)info;
++
++	if (pdev->dev.platform_data == NULL) {
++		dev_err(&pdev->dev, "Could not get Bluetooth config data\n");
++		return -ENODATA;
++	}
++
++	bt_config = pdev->dev.platform_data;
++	info->chip_type = bt_config->chip_type;
++	info->bt_wakeup_gpio = bt_config->bt_wakeup_gpio;
++	info->host_wakeup_gpio = bt_config->host_wakeup_gpio;
++	info->reset_gpio = bt_config->reset_gpio;
++	info->bt_sysclk = bt_config->bt_sysclk;
++
++	NBT_DBG("RESET gpio: %d\n", info->reset_gpio);
++	NBT_DBG("BTWU gpio: %d\n", info->bt_wakeup_gpio);
++	NBT_DBG("HOSTWU gpio: %d\n", info->host_wakeup_gpio);
++	NBT_DBG("Uart: %d\n", bt_config->bt_uart);
++	NBT_DBG("sysclk: %d\n", info->bt_sysclk);
++
++	err = gpio_request(info->reset_gpio, "BT reset");
++	if (err < 0) {
++		dev_err(&pdev->dev, "Cannot get GPIO line %d\n",
++			info->reset_gpio);
++		kfree(info);
++		goto cleanup;
++	}
++
++	err = gpio_request(info->bt_wakeup_gpio, "BT wakeup");
++	if (err < 0)
++	{
++		dev_err(info->dev, "Cannot get GPIO line 0x%d",
++			info->bt_wakeup_gpio);
++		gpio_free(info->reset_gpio);
++		kfree(info);
++		goto cleanup;
++	}
++
++	err = gpio_request(info->host_wakeup_gpio, "BT host wakeup");
++	if (err < 0)
++	{
++		dev_err(info->dev, "Cannot get GPIO line %d",
++		       info->host_wakeup_gpio);
++		gpio_free(info->reset_gpio);
++		gpio_free(info->bt_wakeup_gpio);
++		kfree(info);
++		goto cleanup;
++	}
++
++	gpio_direction_output(info->reset_gpio, 0);
++	gpio_direction_output(info->bt_wakeup_gpio, 0);
++	gpio_direction_input(info->host_wakeup_gpio);
++
++//FIXME
++#if defined(CONFIG_ARCH_OMAP1)
++# define OMAP_UART1_BASE	OMAP1_UART1_BASE
++# define OMAP_UART2_BASE	OMAP1_UART2_BASE
++# define OMAP_UART3_BASE	OMAP1_UART3_BASE
++#elif defined(CONFIG_ARCH_OMAP2)
++# define OMAP_UART1_BASE	OMAP2_UART1_BASE
++# define OMAP_UART2_BASE	OMAP2_UART2_BASE
++# define OMAP_UART3_BASE	OMAP2_UART3_BASE
++#elif defined(CONFIG_ARCH_OMAP3)
++# define OMAP_UART1_BASE	OMAP3_UART1_BASE
++# define OMAP_UART2_BASE	OMAP3_UART2_BASE
++# define OMAP_UART3_BASE	OMAP3_UART3_BASE
++#elif defined(CONFIG_ARCH_OMAP4)
++# define OMAP_UART1_BASE	OMAP4_UART1_BASE
++# define OMAP_UART2_BASE	OMAP4_UART2_BASE
++# define OMAP_UART3_BASE	OMAP4_UART3_BASE
++#else
++# error
++#endif
++	switch (bt_config->bt_uart) {
++	case 1:
++		if (cpu_is_omap16xx()) {
++			irq = INT_UART1;
++			info->uart_fclk = clk_get(NULL, "uart1_ck");
++		} else if (cpu_is_omap24xx()) {
++			irq = INT_24XX_UART1_IRQ;
++			info->uart_iclk = clk_get(NULL, "uart1_ick");
++			info->uart_fclk = clk_get(NULL, "uart1_fck");
++		}
++		/* FIXME: Use platform_get_resource for the port */
++		info->uart_base = ioremap(OMAP_UART1_BASE, 0x16);
++		if (!info->uart_base)
++			goto cleanup;
++		break;
++	case 2:
++		if (cpu_is_omap16xx()) {
++			irq = INT_UART2;
++			info->uart_fclk = clk_get(NULL, "uart2_ck");
++		} else {
++			irq = INT_24XX_UART2_IRQ;
++			info->uart_iclk = clk_get(NULL, "uart2_ick");
++			info->uart_fclk = clk_get(NULL, "uart2_fck");
++		}
++		/* FIXME: Use platform_get_resource for the port */
++		info->uart_base = ioremap(OMAP_UART2_BASE, 0x16);
++		if (!info->uart_base)
++			goto cleanup;
++		break;
++	case 3:
++		if (cpu_is_omap16xx()) {
++			irq = INT_UART3;
++			info->uart_fclk = clk_get(NULL, "uart3_ck");
++		} else {
++			irq = INT_24XX_UART3_IRQ;
++			info->uart_iclk = clk_get(NULL, "uart3_ick");
++			info->uart_fclk = clk_get(NULL, "uart3_fck");
++		}
++		/* FIXME: Use platform_get_resource for the port */
++		info->uart_base = ioremap(OMAP_UART3_BASE, 0x16);
++		if (!info->uart_base)
++			goto cleanup;
++		break;
++	default:
++		dev_err(info->dev, "No uart defined\n");
++		goto cleanup;
++	}
++
++	info->irq = irq;
++	err = request_irq(irq, hci_h4p_interrupt, 0, "hci_h4p", (void *)info);
++	if (err < 0) {
++		dev_err(info->dev, "hci_h4p: unable to get IRQ %d\n", irq);
++		goto cleanup;
++	}
++
++	err = request_irq(gpio_to_irq(info->host_wakeup_gpio),
++			  hci_h4p_wakeup_interrupt,
++				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++			  "hci_h4p_wkup", (void *)info);
++	if (err < 0) {
++		dev_err(info->dev, "hci_h4p: unable to get wakeup IRQ %d\n",
++			  gpio_to_irq(info->host_wakeup_gpio));
++		free_irq(irq, (void *)info);
++		goto cleanup;
++	}
++
++	hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
++	hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_CTS | UART_EFR_RTS);
++	err = hci_h4p_init_uart(info);
++	if (err < 0)
++		goto cleanup_irq;
++	err = hci_h4p_reset(info);
++	if (err < 0)
++		goto cleanup_irq;
++	err = hci_h4p_wait_for_cts(info, 1, 10);
++	if (err < 0)
++		goto cleanup_irq;
++	hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
++
++	platform_set_drvdata(pdev, info);
++	err = hci_h4p_sysfs_create_files(info->dev);
++	if (err < 0)
++		goto cleanup_irq;
++
++	if (hci_h4p_register_hdev(info) < 0) {
++		dev_err(info->dev, "failed to register hci_h4p hci device\n");
++		goto cleanup_irq;
++	}
++	gpio_set_value(info->reset_gpio, 0);
++
++	return 0;
++
++cleanup_irq:
++	free_irq(irq, (void *)info);
++	free_irq(gpio_to_irq(info->host_wakeup_gpio), (void *)info);
++cleanup:
++	gpio_set_value(info->reset_gpio, 0);
++	gpio_free(info->reset_gpio);
++	gpio_free(info->bt_wakeup_gpio);
++	gpio_free(info->host_wakeup_gpio);
++	kfree(info);
++
++	return err;
++
++}
++
++static int hci_h4p_remove(struct platform_device *dev)
++{
++	struct hci_h4p_info *info;
++
++	info = platform_get_drvdata(dev);
++
++	hci_h4p_hci_close(info->hdev);
++	free_irq(gpio_to_irq(info->host_wakeup_gpio), (void *) info);
++	hci_free_dev(info->hdev);
++	gpio_free(info->reset_gpio);
++	gpio_free(info->bt_wakeup_gpio);
++	gpio_free(info->host_wakeup_gpio);
++	free_irq(info->irq, (void *) info);
++	kfree(info);
++
++	return 0;
++}
++
++static struct platform_driver hci_h4p_driver = {
++	.probe		= hci_h4p_probe,
++	.remove		= hci_h4p_remove,
++	.driver		= {
++		.name	= "hci_h4p",
++	},
++};
++
++static int __init hci_h4p_init(void)
++{
++	int err = 0;
++
++	/* Register the driver with LDM */
++	err = platform_driver_register(&hci_h4p_driver);
++	if (err < 0)
++		printk(KERN_WARNING "failed to register hci_h4p driver\n");
++
++	return err;
++}
++
++static void __exit hci_h4p_exit(void)
++{
++	platform_driver_unregister(&hci_h4p_driver);
++}
++
++module_init(hci_h4p_init);
++module_exit(hci_h4p_exit);
++
++MODULE_DESCRIPTION("h4 driver with nokia extensions");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Ville Tervo");
+Index: linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/fw.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/fw.c	2010-11-05 17:04:44.762000001 +0100
+@@ -0,0 +1,155 @@
++/*
++ * This file is part of hci_h4p bluetooth driver
++ *
++ * Copyright (C) 2005, 2006 Nokia Corporation.
++ *
++ * Contact: Ville Tervo <ville.tervo@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/skbuff.h>
++#include <linux/firmware.h>
++#include <linux/clk.h>
++
++#include <net/bluetooth/bluetooth.h>
++
++#include "hci_h4p.h"
++
++#define BT_CHIP_TI	2
++#define BT_CHIP_CSR	1
++
++static int fw_pos;
++
++/* Firmware handling */
++static int hci_h4p_open_firmware(struct hci_h4p_info *info,
++				 const struct firmware **fw_entry)
++{
++	int err;
++
++	fw_pos = 0;
++	NBT_DBG_FW("Opening %d firmware\n", info->chip_type);
++	switch (info->chip_type) {
++	case BT_CHIP_TI:
++		err = request_firmware(fw_entry, "brf6150fw.bin", info->dev);
++		break;
++	case BT_CHIP_CSR:
++		err = request_firmware(fw_entry, "bc4fw.bin", info->dev);
++		break;
++	default:
++		dev_err(info->dev, "Invalid chip type\n");
++		*fw_entry = NULL;
++		err = -EINVAL;
++	}
++
++	return err;
++}
++
++static void hci_h4p_close_firmware(const struct firmware *fw_entry)
++{
++	release_firmware(fw_entry);
++}
++
++/* Read fw. Return length of the command. If no more commands in
++ * fw 0 is returned. In error case return value is negative.
++ */
++static int hci_h4p_read_fw_cmd(struct hci_h4p_info *info, struct sk_buff **skb,
++			       const struct firmware *fw_entry, int how)
++{
++	unsigned int cmd_len;
++
++	if (fw_pos >= fw_entry->size) {
++		return 0;
++	}
++
++	cmd_len = fw_entry->data[fw_pos++];
++	if (!cmd_len)
++		return 0;
++
++	if (fw_pos + cmd_len > fw_entry->size) {
++		dev_err(info->dev, "Corrupted firmware image\n");
++		return -EMSGSIZE;
++	}
++
++	*skb = bt_skb_alloc(cmd_len, how);
++	if (!*skb) {
++		dev_err(info->dev, "Cannot reserve memory for buffer\n");
++		return -ENOMEM;
++	}
++	memcpy(skb_put(*skb, cmd_len), &fw_entry->data[fw_pos], cmd_len);
++
++	fw_pos += cmd_len;
++
++	return (*skb)->len;
++}
++
++int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue)
++{
++	const struct firmware *fw_entry = NULL;
++	struct sk_buff *skb = NULL;
++	int err;
++
++	err = hci_h4p_open_firmware(info, &fw_entry);
++	if (err < 0 || !fw_entry)
++		goto err_clean;
++
++	while ((err = hci_h4p_read_fw_cmd(info, &skb, fw_entry, GFP_KERNEL))) {
++		if (err < 0 || !skb)
++			goto err_clean;
++
++		skb_queue_tail(fw_queue, skb);
++	}
++
++err_clean:
++	hci_h4p_close_firmware(fw_entry);
++	return err;
++}
++
++int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue)
++{
++	int err;
++
++	switch(info->chip_type) {
++	case BT_CHIP_CSR:
++		err = hci_h4p_bc4_send_fw(info, fw_queue);
++		break;
++	case BT_CHIP_TI:
++		err = hci_h4p_brf6150_send_fw(info, fw_queue);
++		break;
++	default:
++		dev_err(info->dev, "Don't know how to send firmware\n");
++		err = -EINVAL;
++	}
++
++	return err;
++}
++
++void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb)
++{
++	switch (info->chip_type) {
++	case BT_CHIP_CSR:
++		hci_h4p_bc4_parse_fw_event(info, skb);
++		break;
++	case BT_CHIP_TI:
++		hci_h4p_brf6150_parse_fw_event(info, skb);
++		break;
++	default:
++		dev_err(info->dev, "Don't know how to parse fw event\n");
++		info->fw_error = -EINVAL;
++	}
++
++	return;
++}
+Index: linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/fw-csr.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/fw-csr.c	2010-11-05 17:04:44.762000001 +0100
+@@ -0,0 +1,149 @@
++/*
++ * This file is part of hci_h4p bluetooth driver
++ *
++ * Copyright (C) 2005, 2006 Nokia Corporation.
++ *
++ * Contact: Ville Tervo <ville.tervo@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/skbuff.h>
++#include <linux/delay.h>
++#include <linux/serial_reg.h>
++
++#include "hci_h4p.h"
++
++void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb)
++{
++	/* Check if this is fw packet */
++	if (skb->data[0] != 0xff) {
++		hci_recv_frame(skb);
++		return;
++	}
++
++	if (skb->data[11] || skb->data[12]) {
++		dev_err(info->dev, "Firmware sending command failed\n");
++		info->fw_error = -EPROTO;
++	}
++
++	kfree_skb(skb);
++	complete(&info->fw_completion);
++}
++
++int hci_h4p_bc4_send_fw(struct hci_h4p_info *info,
++			struct sk_buff_head *fw_queue)
++{
++	struct sk_buff *skb;
++	unsigned int offset;
++	int retries, count, i;
++
++	info->fw_error = 0;
++
++	NBT_DBG_FW("Sending firmware\n");
++	skb = skb_dequeue(fw_queue);
++
++	if (!skb)
++		return -ENOMSG;
++
++	info->bdaddr[0] = 0x00;
++	info->bdaddr[1] = 0x1D;
++	info->bdaddr[2] = 0x6E;
++	info->bdaddr[3] = 0xD4;
++	info->bdaddr[4] = 0xF0;
++	info->bdaddr[5] = 0x37;
++
++	/* Check if this is bd_address packet */
++	if (skb->data[15] == 0x01 && skb->data[16] == 0x00) {
++		dev_info(info->dev, "bd_address packet found\n");
++		offset = 21;
++		skb->data[offset + 1] = 0x00;
++		skb->data[offset + 5] = 0x00;
++		skb->data[offset + 7] = info->bdaddr[0];
++		skb->data[offset + 6] = info->bdaddr[1];
++		skb->data[offset + 4] = info->bdaddr[2];
++		skb->data[offset + 0] = info->bdaddr[3];
++		skb->data[offset + 3] = info->bdaddr[4];
++		skb->data[offset + 2] = info->bdaddr[5];
++	}
++
++	for (i = 0; i < 6; i++) {
++		if (info->bdaddr[i] != 0x00)
++			break;
++	}
++
++	/* if (i > 5) {
++		dev_info(info->dev, "Valid bluetooth address not found.\n");
++		kfree_skb(skb);
++		return -ENODEV;
++	} */
++
++	for (count = 1; ; count++) {
++		NBT_DBG_FW("Sending firmware command %d\n", count);
++		init_completion(&info->fw_completion);
++		skb_queue_tail(&info->txq, skb);
++		tasklet_schedule(&info->tx_task);
++
++		skb = skb_dequeue(fw_queue);
++		if (!skb)
++			break;
++
++		if (!wait_for_completion_timeout(&info->fw_completion,
++						 msecs_to_jiffies(1000))) {
++			dev_err(info->dev, "No reply to fw command\n");
++			return -ETIMEDOUT;
++		}
++
++		if (info->fw_error) {
++			dev_err(info->dev, "FW error\n");
++			return -EPROTO;
++		}
++	};
++
++	/* Wait for chip warm reset */
++	retries = 100;
++	while ((!skb_queue_empty(&info->txq) ||
++	       !(hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT)) &&
++	       retries--) {
++		msleep(10);
++	}
++	if (!retries) {
++		dev_err(info->dev, "Transmitter not empty\n");
++		return -ETIMEDOUT;
++	}
++
++	hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE);
++
++	if (hci_h4p_wait_for_cts(info, 1, 100)) {
++		dev_err(info->dev, "cts didn't go down after final speed change\n");
++		return -ETIMEDOUT;
++	}
++
++	retries = 100;
++	do {
++		init_completion(&info->init_completion);
++		hci_h4p_send_alive_packet(info);
++		retries--;
++	} while (!wait_for_completion_timeout(&info->init_completion, 100) &&
++		 retries > 0);
++
++	if (!retries) {
++		dev_err(info->dev, "No alive reply after speed change\n");
++		return -ETIMEDOUT;
++	}
++
++	return 0;
++}
+Index: linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/fw-ti.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/fw-ti.c	2010-11-05 17:04:44.762000001 +0100
+@@ -0,0 +1,90 @@
++/*
++ * This file is part of hci_h4p bluetooth driver
++ *
++ * Copyright (C) 2005, 2006 Nokia Corporation.
++ *
++ * Contact: Ville Tervo <ville.tervo@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/skbuff.h>
++
++#include "hci_h4p.h"
++
++void hci_h4p_brf6150_parse_fw_event(struct hci_h4p_info *info,
++				    struct sk_buff *skb)
++{
++	struct hci_fw_event *ev;
++	int err = 0;
++
++	if (bt_cb(skb)->pkt_type != H4_EVT_PKT) {
++		dev_err(info->dev, "Got non event fw packet.\n");
++		err = -EPROTO;
++		goto ret;
++	}
++
++	ev = (struct hci_fw_event *)skb->data;
++	if (ev->hev.evt != HCI_EV_CMD_COMPLETE) {
++		dev_err(info->dev, "Got non cmd complete fw event\n");
++		err = -EPROTO;
++		goto ret;
++	}
++
++	if (ev->status != 0) {
++		dev_err(info->dev, "Got error status from fw command\n");
++		err = -EPROTO;
++		goto ret;
++	}
++
++ret:
++	info->fw_error = err;
++	complete(&info->fw_completion);
++}
++
++int hci_h4p_brf6150_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue)
++{
++	struct sk_buff *skb;
++	int err = 0;
++
++	info->fw_error = 0;
++
++	while ((skb = skb_dequeue(fw_queue)) != NULL) {
++		/* We should allways send word aligned data to h4+ devices */
++		if (skb->len % 2) {
++			err = skb_pad(skb, 1);
++		}
++		if (err)
++			return err;
++
++		init_completion(&info->fw_completion);
++		skb_queue_tail(&info->txq, skb);
++		tasklet_schedule(&info->tx_task);
++
++		if (!wait_for_completion_timeout(&info->fw_completion, HZ)) {
++			dev_err(info->dev, "Timeout while sending brf6150 fw\n");
++			return -ETIMEDOUT;
++		}
++
++		if (info->fw_error) {
++			dev_err(info->dev, "There was fw_error while sending bfr6150 fw\n");
++			return -EPROTO;
++		}
++	}
++	NBT_DBG_FW("Firmware sent\n");
++
++	return 0;
++}
+Index: linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/hci_h4p.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/hci_h4p.h	2010-11-05 17:04:44.762000001 +0100
+@@ -0,0 +1,183 @@
++/*
++ * This file is part of hci_h4p bluetooth driver
++ *
++ * Copyright (C) 2005, 2006 Nokia Corporation.
++ *
++ * Contact: Ville Tervo <ville.tervo@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <mach/board.h>
++
++#include <net/bluetooth/bluetooth.h>
++#include <net/bluetooth/hci_core.h>
++#include <net/bluetooth/hci.h>
++
++#ifndef __DRIVERS_BLUETOOTH_HCI_H4P_H
++#define __DRIVERS_BLUETOOTH_HCI_H4P_H
++
++#define UART_SYSC_OMAP_RESET	0x03
++#define UART_SYSS_RESETDONE	0x01
++#define UART_OMAP_SCR_EMPTY_THR	0x08
++#define UART_OMAP_SCR_WAKEUP	0x10
++#define UART_OMAP_SSR_WAKEUP	0x02
++#define UART_OMAP_SSR_TXFULL	0x01
++
++#if 0
++#define NBT_DBG(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
++#else
++#define NBT_DBG(...)
++#endif
++
++#if 0
++#define NBT_DBG_FW(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
++#else
++#define NBT_DBG_FW(...)
++#endif
++
++#if 0
++#define NBT_DBG_POWER(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
++#else
++#define NBT_DBG_POWER(...)
++#endif
++
++#if 0
++#define NBT_DBG_TRANSFER(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
++#else
++#define NBT_DBG_TRANSFER(...)
++#endif
++
++#if 0
++#define NBT_DBG_TRANSFER_NF(fmt, arg...)  printk(fmt "" , ## arg)
++#else
++#define NBT_DBG_TRANSFER_NF(...)
++#endif
++
++#if 0
++#define NBT_DBG_DMA(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
++#else
++#define NBT_DBG_DMA(...)
++#endif
++
++struct hci_h4p_info {
++	struct hci_dev *hdev;
++	spinlock_t lock;
++
++	void __iomem *uart_base;
++	unsigned long uart_phys_base;
++	int irq;
++	struct device *dev;
++	u8 bdaddr[6];
++	u8 chip_type;
++	u8 bt_wakeup_gpio;
++	u8 host_wakeup_gpio;
++	u8 reset_gpio;
++	u8 bt_sysclk;
++
++
++	struct sk_buff_head fw_queue;
++	struct sk_buff *alive_cmd_skb;
++	struct completion init_completion;
++	struct completion fw_completion;
++	int fw_error;
++	int init_error;
++
++	struct sk_buff_head txq;
++	struct tasklet_struct tx_task;
++
++	struct sk_buff *rx_skb;
++	long rx_count;
++	unsigned long rx_state;
++	unsigned long garbage_bytes;
++	struct tasklet_struct rx_task;
++
++	int pm_enabled;
++	int tx_pm_enabled;
++	int rx_pm_enabled;
++	struct timer_list tx_pm_timer;
++	struct timer_list rx_pm_timer;
++
++	int tx_clocks_en;
++	int rx_clocks_en;
++	spinlock_t clocks_lock;
++	struct clk *uart_iclk;
++	struct clk *uart_fclk;
++};
++
++#define MAX_BAUD_RATE		921600
++#define BC4_MAX_BAUD_RATE	3692300
++#define UART_CLOCK		48000000
++#define BT_INIT_DIVIDER		320
++#define BT_BAUDRATE_DIVIDER	384000000
++#define BT_SYSCLK_DIV		1000
++#define INIT_SPEED		120000
++
++#define H4_TYPE_SIZE		1
++
++/* H4+ packet types */
++#define H4_CMD_PKT		0x01
++#define H4_ACL_PKT		0x02
++#define H4_SCO_PKT		0x03
++#define H4_EVT_PKT		0x04
++#define H4_NEG_PKT		0x06
++#define H4_ALIVE_PKT		0x07
++
++/* TX states */
++#define WAIT_FOR_PKT_TYPE	1
++#define WAIT_FOR_HEADER		2
++#define WAIT_FOR_DATA		3
++
++struct hci_fw_event {
++	struct hci_event_hdr hev;
++	struct hci_ev_cmd_complete cmd;
++	u8 status;
++} __attribute__ ((packed));
++
++struct hci_bc4_set_bdaddr {
++	u8 type;
++	struct hci_command_hdr cmd_hdr;
++} __attribute__ ((packed));
++
++int hci_h4p_send_alive_packet(struct hci_h4p_info *info);
++
++void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info,
++				struct sk_buff *skb);
++int hci_h4p_bc4_send_fw(struct hci_h4p_info *info,
++			struct sk_buff_head *fw_queue);
++
++void hci_h4p_brf6150_parse_fw_event(struct hci_h4p_info *info,
++				    struct sk_buff *skb);
++int hci_h4p_brf6150_send_fw(struct hci_h4p_info *info,
++			    struct sk_buff_head *fw_queue);
++
++int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue);
++int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue);
++void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb);
++
++int hci_h4p_sysfs_create_files(struct device *dev);
++
++void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val);
++u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset);
++void hci_h4p_set_rts(struct hci_h4p_info *info, int active);
++int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active, int timeout_ms);
++void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which);
++void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which);
++void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed);
++int hci_h4p_reset_uart(struct hci_h4p_info *info);
++int hci_h4p_init_uart(struct hci_h4p_info *info);
++
++#endif /* __DRIVERS_BLUETOOTH_HCI_H4P_H */
+Index: linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/Makefile
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/Makefile	2010-11-05 17:04:44.762000001 +0100
+@@ -0,0 +1,7 @@
++#
++# Makefile for the Linux Bluetooth HCI device drivers.
++#
++
++obj-$(CONFIG_BT_HCIH4P)		+= hci_h4p.o
++
++hci_h4p-objs := core.o fw.o uart.o sysfs.o fw-ti.o fw-csr.o
+Index: linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/sysfs.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/sysfs.c	2010-11-05 17:04:44.762000001 +0100
+@@ -0,0 +1,84 @@
++/*
++ * This file is part of hci_h4p bluetooth driver
++ *
++ * Copyright (C) 2005, 2006 Nokia Corporation.
++ *
++ * Contact: Ville Tervo <ville.tervo@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++
++#include "hci_h4p.h"
++
++#ifdef CONFIG_SYSFS
++
++static ssize_t hci_h4p_store_bdaddr(struct device *dev, struct device_attribute *attr,
++				    const char *buf, size_t count)
++{
++	struct hci_h4p_info *info = (struct hci_h4p_info*)dev_get_drvdata(dev);
++	unsigned int bdaddr[6];
++	int ret, i;
++
++	dev_info(info->dev, "HCI_H4P_STORE_BDADDR called\n");
++
++	ret = sscanf(buf, "%2x:%2x:%2x:%2x:%2x:%2x\n",
++			&bdaddr[0], &bdaddr[1], &bdaddr[2],
++			&bdaddr[3], &bdaddr[4], &bdaddr[5]);
++
++	if (ret != 6) {
++		dev_info(info->dev, "bdaddr isn't found\n");
++		return -EINVAL;
++	}
++
++	//for (i = 0; i < 6; i++)
++		//info->bdaddr[i] = bdaddr[i] & 0xff;
++
++	info->bdaddr[0] = 0x00;
++	info->bdaddr[1] = 0x1D;
++	info->bdaddr[2] = 0x6E;
++	info->bdaddr[3] = 0xD4;
++	info->bdaddr[4] = 0xF0;
++	info->bdaddr[5] = 0x37;
++
++	return count;
++}
++
++static ssize_t hci_h4p_show_bdaddr(struct device *dev, struct device_attribute *attr,
++				   char *buf)
++{
++	struct hci_h4p_info *info = (struct hci_h4p_info*)dev_get_drvdata(dev);
++
++	return sprintf(buf, "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
++		       info->bdaddr[0],
++		       info->bdaddr[1],
++		       info->bdaddr[2],
++		       info->bdaddr[3],
++		       info->bdaddr[4],
++		       info->bdaddr[5]);
++}
++
++static DEVICE_ATTR(bdaddr, S_IRUGO | S_IWUSR, hci_h4p_show_bdaddr, hci_h4p_store_bdaddr);
++int hci_h4p_sysfs_create_files(struct device *dev)
++{
++	return device_create_file(dev, &dev_attr_bdaddr);
++}
++
++#endif
+Index: linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/uart.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.37-rc1/drivers/bluetooth/hci_h4p/uart.c	2010-11-05 17:04:44.762000001 +0100
+@@ -0,0 +1,169 @@
++/*
++ * This file is part of hci_h4p bluetooth driver
++ *
++ * Copyright (C) 2005, 2006 Nokia Corporation.
++ *
++ * Contact: Ville Tervo <ville.tervo@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/serial_reg.h>
++#include <linux/delay.h>
++#include <linux/clk.h>
++
++#include <asm/io.h>
++
++#include "hci_h4p.h"
++
++inline void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val)
++{
++	offset <<= 2;
++	__raw_writeb(val, info->uart_base + offset);
++	//outb(val, info->uart_base + (offset << 2));
++}
++
++inline u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset)
++{
++	offset <<= 2;
++	return (u8)__raw_readb(info->uart_base + offset);
++	//return (unsigned int)__raw_readb(up->membase + offset);
++	//return inb(info->uart_base + (offset << 2));
++}
++
++void hci_h4p_set_rts(struct hci_h4p_info *info, int active)
++{
++	u8 b;
++
++	b = hci_h4p_inb(info, UART_MCR);
++	if (active)
++		b |= UART_MCR_RTS;
++	else
++		b &= ~UART_MCR_RTS;
++	hci_h4p_outb(info, UART_MCR, b);
++}
++
++int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active,
++			 int timeout_ms)
++{
++	int okay;
++	unsigned long timeout;
++
++	okay = 0;
++	timeout = jiffies + msecs_to_jiffies(timeout_ms);
++	for (;;) {
++		int state;
++
++		state = hci_h4p_inb(info, UART_MSR) & UART_MSR_CTS;
++		if (active) {
++			if (state)
++				return 0;
++		} else {
++			if (!state)
++				return 0;
++		}
++		if (time_after(jiffies, timeout))
++			return -ETIMEDOUT;
++	}
++}
++
++void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which)
++{
++	u8 lcr, b;
++
++	lcr = hci_h4p_inb(info, UART_LCR);
++	hci_h4p_outb(info, UART_LCR, 0xbf);
++	b = hci_h4p_inb(info, UART_EFR);
++	if (on)
++		b |= which;
++	else
++		b &= ~which;
++	hci_h4p_outb(info, UART_EFR, b);
++	hci_h4p_outb(info, UART_LCR, lcr);
++}
++
++void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&info->lock, flags);
++	__hci_h4p_set_auto_ctsrts(info, on, which);
++	spin_unlock_irqrestore(&info->lock, flags);
++}
++
++void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed)
++{
++	unsigned int divisor;
++	u8 lcr, mdr1;
++
++	NBT_DBG("Setting speed %lu\n", speed);
++
++	if (speed >= 460800) {
++		divisor = UART_CLOCK / 13 / speed;
++		mdr1 = 3;
++	} else {
++		divisor = UART_CLOCK / 16 / speed;
++		mdr1 = 0;
++	}
++
++	hci_h4p_outb(info, UART_OMAP_MDR1, 7); /* Make sure UART mode is disabled */
++	lcr = hci_h4p_inb(info, UART_LCR);
++	hci_h4p_outb(info, UART_LCR, UART_LCR_DLAB);     /* Set DLAB */
++	hci_h4p_outb(info, UART_DLL, divisor & 0xff);    /* Set speed */
++	hci_h4p_outb(info, UART_DLM, divisor >> 8);
++	hci_h4p_outb(info, UART_LCR, lcr);
++	hci_h4p_outb(info, UART_OMAP_MDR1, mdr1); /* Make sure UART mode is enabled */
++}
++
++int hci_h4p_reset_uart(struct hci_h4p_info *info)
++{
++	int count = 0;
++
++	/* Reset the  UART */
++	hci_h4p_outb(info, UART_OMAP_SYSC, UART_SYSC_OMAP_RESET);
++	while (!(hci_h4p_inb(info, UART_OMAP_SYSS) & UART_SYSS_RESETDONE)) {
++		if (count++ > 20000) {
++			dev_err(info->dev, "hci_h4p: UART reset timeout\n");
++			return -ENODEV;
++		}
++		udelay(1);
++	}
++
++	return 0;
++}
++
++int hci_h4p_init_uart(struct hci_h4p_info *info)
++{
++	int err;
++
++	err = hci_h4p_reset_uart(info);
++	if (err < 0)
++		return err;
++
++	/* Enable and setup FIFO */
++	hci_h4p_outb(info, UART_LCR, UART_LCR_WLEN8);
++	hci_h4p_outb(info, UART_OMAP_MDR1, 0x00); /* Make sure UART mode is enabled */
++	hci_h4p_outb(info, UART_OMAP_SCR, 0x80);
++	hci_h4p_outb(info, UART_EFR, UART_EFR_ECB);
++	hci_h4p_outb(info, UART_MCR, UART_MCR_TCRTLR);
++	hci_h4p_outb(info, UART_TI752_TLR, 0x1f);
++	hci_h4p_outb(info, UART_TI752_TCR, 0xef);
++	hci_h4p_outb(info, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
++		     UART_FCR_CLEAR_XMIT | UART_FCR_R_TRIG_00);
++	hci_h4p_outb(info, UART_IER, UART_IER_RDI);
++
++	return 0;
++}
+Index: linux-2.6.37-rc1/drivers/bluetooth/Kconfig
+===================================================================
+--- linux-2.6.37-rc1.orig/drivers/bluetooth/Kconfig	2010-11-01 12:54:12.000000000 +0100
++++ linux-2.6.37-rc1/drivers/bluetooth/Kconfig	2010-11-05 17:04:44.762000001 +0100
+@@ -173,6 +173,16 @@
+ 	  Say Y here to compile support for HCI UART devices into the
+ 	  kernel or say M to compile it as module (btuart_cs).
+ 
++config BT_HCIH4P
++	tristate "HCI driver with H4 Nokia extensions"
++	depends on BT && ARCH_OMAP
++	help
++	  Bluetooth HCI driver with H4 extensions.  This driver provides
++	  support for H4+ Bluetooth chip with vendor-specific H4 extensions.
++
++	  Say Y here to compile support for h4 extended devices into the kernel
++	  or say M to compile it as module (hci_h4p).
++
+ config BT_HCIVHCI
+ 	tristate "HCI VHCI (Virtual HCI device) driver"
+ 	help
+Index: linux-2.6.37-rc1/drivers/bluetooth/Makefile
+===================================================================
+--- linux-2.6.37-rc1.orig/drivers/bluetooth/Makefile	2010-11-01 12:54:12.000000000 +0100
++++ linux-2.6.37-rc1/drivers/bluetooth/Makefile	2010-11-05 17:04:44.763000001 +0100
+@@ -11,6 +11,7 @@
+ obj-$(CONFIG_BT_HCIBT3C)	+= bt3c_cs.o
+ obj-$(CONFIG_BT_HCIBLUECARD)	+= bluecard_cs.o
+ obj-$(CONFIG_BT_HCIBTUART)	+= btuart_cs.o
++obj-$(CONFIG_BT_HCIH4P)		+= hci_h4p/
+ 
+ obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
+ obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
diff --git a/target/linux/omap24xx/patches-2.6.38/500-cbus.patch b/target/linux/omap24xx/patches-2.6.38/500-cbus.patch
new file mode 100644
index 0000000000..6666bd9655
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/500-cbus.patch
@@ -0,0 +1,3563 @@
+---
+ arch/arm/Kconfig               |    4 
+ drivers/Makefile               |    2 
+ drivers/cbus/Kconfig           |   89 ++++
+ drivers/cbus/Makefile          |   14 
+ drivers/cbus/cbus.c            |  309 ++++++++++++++++
+ drivers/cbus/cbus.h            |   36 +
+ drivers/cbus/retu-headset.c    |  356 ++++++++++++++++++
+ drivers/cbus/retu-pwrbutton.c  |  118 ++++++
+ drivers/cbus/retu-rtc.c        |  477 ++++++++++++++++++++++++
+ drivers/cbus/retu-user.c       |  424 ++++++++++++++++++++++
+ drivers/cbus/retu-wdt.c        |  387 ++++++++++++++++++++
+ drivers/cbus/retu.c            |  468 ++++++++++++++++++++++++
+ drivers/cbus/retu.h            |   77 ++++
+ drivers/cbus/tahvo-usb.c       |  788 +++++++++++++++++++++++++++++++++++++++++
+ drivers/cbus/tahvo-user.c      |  406 +++++++++++++++++++++
+ drivers/cbus/tahvo.c           |  443 +++++++++++++++++++++++
+ drivers/cbus/tahvo.h           |   61 +++
+ drivers/cbus/user_retu_tahvo.h |   75 +++
+ 18 files changed, 4533 insertions(+), 1 deletion(-)
+
+Index: linux-2.6.38-rc6/drivers/cbus/cbus.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/cbus.c	2011-02-24 12:04:51.456189134 +0100
+@@ -0,0 +1,332 @@
++/*
++ * drivers/cbus/cbus.c
++ *
++ * Support functions for CBUS serial protocol
++ *
++ * Copyright (C) 2004-2010 Nokia Corporation
++ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
++ *	      David Weinehall <david.weinehall@nokia.com>, and
++ *	      Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * Several updates and cleanups by Felipe Balbi <felipe.balbi@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <plat/cbus.h>
++
++#include "cbus.h"
++
++#define CBUS_XFER_READ		1
++#define CBUS_XFER_WRITE		0
++
++struct cbus_host {
++	/* host lock */
++	spinlock_t	lock;
++
++	struct device	*dev;
++
++	int		clk_gpio;
++	int		dat_gpio;
++	int		sel_gpio;
++};
++
++static struct cbus_host *cbus_host;
++
++/**
++ * cbus_send_bit - sends one bit over the bus
++ * @host: the host we're using
++ * @bit: one bit of information to send
++ * @input: whether to set data pin as input after sending
++ */
++static int cbus_send_bit(struct cbus_host *host, unsigned bit,
++		unsigned input)
++{
++	int ret = 0;
++
++	gpio_set_value(host->dat_gpio, bit ? 1 : 0);
++	gpio_set_value(host->clk_gpio, 1);
++
++	/* The data bit is read on the rising edge of CLK */
++	if (input)
++		ret = gpio_direction_input(host->dat_gpio);
++
++	gpio_set_value(host->clk_gpio, 0);
++
++	return ret;
++}
++
++/**
++ * cbus_send_data - sends @len amount of data over the bus
++ * @host: the host we're using
++ * @data: the data to send
++ * @len: size of the transfer
++ * @input: whether to set data pin as input after sending
++ */
++static int cbus_send_data(struct cbus_host *host, unsigned data, unsigned len,
++		unsigned input)
++{
++	int ret = 0;
++	int i;
++
++	for (i = len; i > 0; i--) {
++		ret = cbus_send_bit(host, data & (1 << (i - 1)),
++				input && (i == 1));
++		if (ret < 0)
++			goto out;
++	}
++
++out:
++	return ret;
++}
++
++/**
++ * cbus_receive_bit - receives one bit from the bus
++ * @host: the host we're using
++ */
++static int cbus_receive_bit(struct cbus_host *host)
++{
++	int ret;
++
++	gpio_set_value(host->clk_gpio, 1);
++	ret = gpio_get_value(host->dat_gpio);
++	if (ret < 0)
++		goto out;
++	gpio_set_value(host->clk_gpio, 0);
++
++out:
++	return ret;
++}
++
++/**
++ * cbus_receive_data - receives @len data from the bus
++ * @host: the host we're using
++ * @len: the length of data to receive
++ */
++static int cbus_receive_data(struct cbus_host *host, unsigned len)
++{
++	int ret = 0;
++	int i;
++
++	for (i = 16; i > 0; i--) {
++		int bit = cbus_receive_bit(host);
++
++		if (bit < 0)
++			goto out;
++
++		if (bit)
++			ret |= 1 << (i - 1);
++	}
++
++out:
++	return ret;
++}
++
++/**
++ * cbus_transfer - transfers data over the bus
++ * @host: the host we're using
++ * @rw: read/write flag
++ * @dev: device address
++ * @reg: register address
++ * @data: if @rw == 0 data to send otherwise 0
++ */
++static int cbus_transfer(struct cbus_host *host, unsigned rw, unsigned dev,
++		unsigned reg, unsigned data)
++{
++	unsigned long flags;
++	int input = 0;
++	int ret = 0;
++
++	/* We don't want interrupts disturbing our transfer */
++	spin_lock_irqsave(&host->lock, flags);
++
++	/* Reset state and start of transfer, SEL stays down during transfer */
++	gpio_set_value(host->sel_gpio, 0);
++
++	/* Set the DAT pin to output */
++	gpio_direction_output(host->dat_gpio, 1);
++
++	/* Send the device address */
++	ret = cbus_send_data(host, dev, 3, 0);
++	if (ret < 0) {
++		dev_dbg(host->dev, "failed sending device addr\n");
++		goto out;
++	}
++
++	/* Send the rw flag */
++	ret = cbus_send_bit(host, rw, 0);
++	if (ret < 0) {
++		dev_dbg(host->dev, "failed sending read/write flag\n");
++		goto out;
++	}
++
++	/* Send the register address */
++	if (rw)
++		input = true;
++
++	ret = cbus_send_data(host, reg, 5, input);
++	if (ret < 0) {
++		dev_dbg(host->dev, "failed sending register addr\n");
++		goto out;
++	}
++
++	if (!rw) {
++		ret = cbus_send_data(host, data, 16, 0);
++		if (ret < 0) {
++			dev_dbg(host->dev, "failed sending data\n");
++			goto out;
++		}
++	} else {
++		gpio_set_value(host->clk_gpio, 1);
++
++		ret = cbus_receive_data(host, 16);
++		if (ret < 0) {
++			dev_dbg(host->dev, "failed receiving data\n");
++			goto out;
++		}
++	}
++
++	/* Indicate end of transfer, SEL goes up until next transfer */
++	gpio_set_value(host->sel_gpio, 1);
++	gpio_set_value(host->clk_gpio, 1);
++	gpio_set_value(host->clk_gpio, 0);
++
++out:
++	spin_unlock_irqrestore(&host->lock, flags);
++
++	return ret;
++}
++
++/**
++ * cbus_read_reg - reads a given register from the device
++ * @dev: device address
++ * @reg: register address
++ */
++int cbus_read_reg(unsigned dev, unsigned reg)
++{
++	return cbus_transfer(cbus_host, CBUS_XFER_READ, dev, reg, 0);
++}
++EXPORT_SYMBOL(cbus_read_reg);
++
++/**
++ * cbus_write_reg - writes to a given register of the device
++ * @dev: device address
++ * @reg: register address
++ * @val: data to be written to @reg
++ */
++int cbus_write_reg(unsigned dev, unsigned reg, unsigned val)
++{
++	return cbus_transfer(cbus_host, CBUS_XFER_WRITE, dev, reg, val);
++}
++EXPORT_SYMBOL(cbus_write_reg);
++
++static int __init cbus_bus_probe(struct platform_device *pdev)
++{
++	struct cbus_host *chost;
++	struct cbus_host_platform_data *pdata = pdev->dev.platform_data;
++	int ret;
++
++	chost = kzalloc(sizeof(*chost), GFP_KERNEL);
++	if (chost == NULL)
++		return -ENOMEM;
++
++	spin_lock_init(&chost->lock);
++
++	chost->clk_gpio = pdata->clk_gpio;
++	chost->dat_gpio = pdata->dat_gpio;
++	chost->sel_gpio = pdata->sel_gpio;
++	chost->dev = &pdev->dev;
++
++	ret = gpio_request(chost->clk_gpio, "CBUS clk");
++	if (ret < 0)
++		goto exit1;
++
++	ret = gpio_request(chost->dat_gpio, "CBUS data");
++	if (ret < 0)
++		goto exit2;
++
++	ret = gpio_request(chost->sel_gpio, "CBUS sel");
++	if (ret < 0)
++		goto exit3;
++
++	gpio_direction_output(chost->clk_gpio, 0);
++	gpio_direction_input(chost->dat_gpio);
++	gpio_direction_output(chost->sel_gpio, 1);
++
++	gpio_set_value(chost->clk_gpio, 1);
++	gpio_set_value(chost->clk_gpio, 0);
++
++	platform_set_drvdata(pdev, chost);
++
++	cbus_host = chost;
++
++	return 0;
++exit3:
++	gpio_free(chost->dat_gpio);
++exit2:
++	gpio_free(chost->clk_gpio);
++exit1:
++	kfree(chost);
++
++	return ret;
++}
++
++static void __exit cbus_bus_remove(struct platform_device *pdev)
++{
++	struct cbus_host	*chost = platform_get_drvdata(pdev);
++
++	gpio_free(chost->sel_gpio);
++	gpio_free(chost->dat_gpio);
++	gpio_free(chost->clk_gpio);
++
++	kfree(chost);
++	cbus_host = NULL;
++}
++
++static struct platform_driver cbus_driver = {
++	.remove		= __exit_p(cbus_bus_remove),
++	.driver		= {
++		.name	= "cbus",
++	},
++};
++
++static int __init cbus_bus_init(void)
++{
++	return platform_driver_probe(&cbus_driver, cbus_bus_probe);
++}
++subsys_initcall(cbus_bus_init);
++
++static void __exit cbus_bus_exit(void)
++{
++	platform_driver_unregister(&cbus_driver);
++}
++module_exit(cbus_bus_exit);
++
++MODULE_DESCRIPTION("CBUS serial protocol");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä");
++MODULE_AUTHOR("David Weinehall");
++MODULE_AUTHOR("Mikko Ylinen");
++MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
++
+Index: linux-2.6.38-rc6/drivers/cbus/cbus.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/cbus.h	2011-02-24 12:04:51.456189134 +0100
+@@ -0,0 +1,29 @@
++/*
++ * drivers/cbus/cbus.h
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
++ *	      David Weinehall <david.weinehall@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __DRIVERS_CBUS_CBUS_H
++#define __DRIVERS_CBUS_CBUS_H
++
++extern int cbus_read_reg(unsigned dev, unsigned reg);
++extern int cbus_write_reg(unsigned dev, unsigned reg, unsigned val);
++
++#endif /* __DRIVERS_CBUS_CBUS_H */
+Index: linux-2.6.38-rc6/drivers/cbus/Kconfig
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/Kconfig	2011-02-24 12:04:51.457189107 +0100
+@@ -0,0 +1,75 @@
++#
++# CBUS device configuration
++#
++
++menu "CBUS support"
++
++config CBUS
++	depends on ARCH_OMAP
++	bool "CBUS support on OMAP"
++	---help---
++	  CBUS is a proprietary serial protocol by Nokia.  It is mainly
++	  used for accessing Energy Management auxiliary chips.
++
++	  If you want CBUS support, you should say Y here.
++
++config CBUS_TAHVO
++	depends on CBUS
++	bool "Support for Tahvo"
++	---help---
++	  Tahvo is a mixed signal ASIC with some system features
++
++	  If you want Tahvo support, you should say Y here.
++
++config CBUS_TAHVO_USB
++	depends on CBUS_TAHVO && USB
++	tristate "Support for Tahvo USB transceiver"
++	---help---
++	  If you want Tahvo support for USB transceiver, say Y or M here.
++
++config CBUS_TAHVO_USB_HOST_BY_DEFAULT
++	depends on CBUS_TAHVO_USB && USB_OTG
++	boolean "Device in USB host mode by default"
++	---help---
++	  Say Y here, if you want the device to enter USB host mode
++	  by default on bootup.
++
++config CBUS_RETU
++	depends on CBUS
++	bool "Support for Retu"
++	---help---
++	  Retu is a mixed signal ASIC with some system features
++
++	  If you want Retu support, you should say Y here.
++
++config CBUS_RETU_POWERBUTTON
++	depends on CBUS_RETU
++	bool "Support for Retu power button"
++	---help---
++	  The power button on Nokia 770 is connected to the Retu ASIC.
++
++	  If you want support for the Retu power button, you should say Y here.
++
++config CBUS_RETU_RTC
++	depends on CBUS_RETU && RTC_CLASS
++	tristate "Support for Retu pseudo-RTC"
++	---help---
++	  Say Y here if you want support for the device that alleges to be an
++	  RTC in Retu. This will expose a sysfs interface for it.
++
++config CBUS_RETU_WDT
++	depends on CBUS_RETU && SYSFS && WATCHDOG
++	tristate "Support for Retu watchdog timer"
++	---help---
++	  Say Y here if you want support for the watchdog in Retu. This will
++	  expose a sysfs interface to grok it.
++
++config CBUS_RETU_HEADSET
++	depends on CBUS_RETU && SYSFS
++	tristate "Support for headset detection with Retu/Vilma"
++	---help---
++	  Say Y here if you want support detecting a headset that's connected
++	  to Retu/Vilma. Detection state and events are exposed through
++	  sysfs.
++
++endmenu
+Index: linux-2.6.38-rc6/drivers/cbus/Makefile
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/Makefile	2011-02-24 12:04:51.458189081 +0100
+@@ -0,0 +1,13 @@
++#
++# Makefile for CBUS.
++#
++
++obj-$(CONFIG_CBUS)		+= cbus.o
++obj-$(CONFIG_CBUS_TAHVO)	+= tahvo.o
++obj-$(CONFIG_CBUS_RETU)		+= retu.o
++obj-$(CONFIG_CBUS_TAHVO_USB)	+= tahvo-usb.o
++
++obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += retu-pwrbutton.o
++obj-$(CONFIG_CBUS_RETU_RTC)	+= retu-rtc.o
++obj-$(CONFIG_CBUS_RETU_WDT)	+= retu-wdt.o
++obj-$(CONFIG_CBUS_RETU_HEADSET)	+= retu-headset.o
+Index: linux-2.6.38-rc6/drivers/cbus/retu.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/retu.c	2011-02-24 12:04:51.458189081 +0100
+@@ -0,0 +1,544 @@
++/**
++ * drivers/cbus/retu.c
++ *
++ * Support functions for Retu ASIC
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
++ *	      David Weinehall <david.weinehall@nokia.com>, and
++ *	      Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++
++#include <linux/slab.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++#include <linux/miscdevice.h>
++#include <linux/poll.h>
++#include <linux/fs.h>
++#include <linux/mutex.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#include <asm/uaccess.h>
++#include <asm/mach-types.h>
++
++#include <plat/mux.h>
++#include <plat/board.h>
++#include <plat/cbus.h>
++
++#include "cbus.h"
++#include "retu.h"
++
++struct retu {
++	/* Device lock */
++	struct mutex		mutex;
++	struct device		*dev;
++
++	int			devid;
++
++	int			irq_base;
++	int			irq_end;
++
++	int			irq;
++
++	int			ack;
++	bool			ack_pending;
++
++	int			mask;
++	bool			mask_pending;
++
++	bool			is_vilma;
++};
++
++static struct retu *the_retu;
++
++/**
++ * __retu_read_reg - Read a value from a register in Retu
++ * @retu: pointer to retu structure
++ * @reg: the register address to read from
++ */
++static int __retu_read_reg(struct retu *retu, unsigned reg)
++{
++	return cbus_read_reg(retu->devid, reg);
++}
++
++/**
++ * __retu_write_reg - Writes a value to a register in Retu
++ * @retu: pointer to retu structure
++ * @reg: the register address to write to
++ * @val: the value to write to the register
++ */
++static void __retu_write_reg(struct retu *retu, unsigned reg, u16 val)
++{
++	cbus_write_reg(retu->devid, reg, val);
++}
++
++/**
++ * retu_read_reg - Read a value from a register in Retu
++ * @child: device pointer for the calling child
++ * @reg: the register to read from
++ *
++ * This function returns the contents of the specified register
++ */
++int retu_read_reg(struct device *child, unsigned reg)
++{
++	struct retu		*retu = dev_get_drvdata(child->parent);
++
++	return __retu_read_reg(retu, reg);
++}
++EXPORT_SYMBOL_GPL(retu_read_reg);
++
++/**
++ * retu_write_reg - Write a value to a register in Retu
++ * @child: the pointer to our calling child
++ * @reg: the register to write to
++ * @val: the value to write to the register
++ *
++ * This function writes a value to the specified register
++ */
++void retu_write_reg(struct device *child, unsigned reg, u16 val)
++{
++	struct retu		*retu = dev_get_drvdata(child->parent);
++
++	__retu_write_reg(retu, reg, val);
++}
++EXPORT_SYMBOL_GPL(retu_write_reg);
++
++/**
++ * retu_set_clear_reg_bits - helper function to read/set/clear bits
++ * @child: device pointer to calling child
++ * @reg: the register address
++ * @set: mask for setting bits
++ * @clear: mask for clearing bits
++ */
++void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
++		u16 clear)
++{
++	struct retu		*retu = dev_get_drvdata(child->parent);
++	u16			w;
++
++	mutex_lock(&retu->mutex);
++	w = __retu_read_reg(retu, reg);
++	w &= ~clear;
++	w |= set;
++	__retu_write_reg(retu, reg, w);
++	mutex_unlock(&retu->mutex);
++}
++EXPORT_SYMBOL_GPL(retu_set_clear_reg_bits);
++
++#define ADC_MAX_CHAN_NUMBER	13
++
++/**
++ * retu_read_adc - Reads AD conversion result
++ * @child: device pointer to calling child
++ * @channel: the ADC channel to read from
++ */
++int retu_read_adc(struct device *child, int channel)
++{
++	struct retu		*retu = dev_get_drvdata(child->parent);
++	int			res;
++
++	if (!retu)
++		return -ENODEV;
++
++	if (channel < 0 || channel > ADC_MAX_CHAN_NUMBER)
++		return -EINVAL;
++
++	mutex_lock(&retu->mutex);
++
++	if ((channel == 8) && retu->is_vilma) {
++		int scr = __retu_read_reg(retu, RETU_REG_ADCSCR);
++		int ch = (__retu_read_reg(retu, RETU_REG_ADCR) >> 10) & 0xf;
++		if (((scr & 0xff) != 0) && (ch != 8))
++			__retu_write_reg(retu, RETU_REG_ADCSCR, (scr & ~0xff));
++	}
++
++	/* Select the channel and read result */
++	__retu_write_reg(retu, RETU_REG_ADCR, channel << 10);
++	res = __retu_read_reg(retu, RETU_REG_ADCR) & 0x3ff;
++
++	if (retu->is_vilma)
++		__retu_write_reg(retu, RETU_REG_ADCR, (1 << 13));
++
++	/* Unlock retu */
++	mutex_unlock(&retu->mutex);
++
++	return res;
++}
++EXPORT_SYMBOL_GPL(retu_read_adc);
++
++static irqreturn_t retu_irq_handler(int irq, void *_retu)
++{
++	struct retu		*retu = _retu;
++
++	int			i;
++
++	u16			idr;
++	u16			imr;
++
++	idr = __retu_read_reg(retu, RETU_REG_IDR);
++	imr = __retu_read_reg(retu, RETU_REG_IMR);
++	idr &= ~imr;
++
++	if (!idr) {
++		dev_vdbg(retu->dev, "No IRQ, spurious?\n");
++		return IRQ_NONE;
++	}
++
++	for (i = 0; idr != 0; i++, idr >>= 1) {
++		if (!(idr & 1))
++			continue;
++
++		handle_nested_irq(i);
++	}
++
++	return IRQ_HANDLED;
++}
++
++/* -------------------------------------------------------------------------- */
++
++static void retu_irq_mask(struct irq_data *data)
++{
++	struct retu		*retu = irq_data_get_irq_chip_data(data);
++	int			irq = data->irq;
++
++	retu->mask |= (1 << (irq - retu->irq_base));
++	retu->mask_pending = true;
++}
++
++static void retu_irq_unmask(struct irq_data *data)
++{
++	struct retu		*retu = irq_data_get_irq_chip_data(data);
++	int			irq = data->irq;
++
++	retu->mask &= ~(1 << (irq - retu->irq_base));
++	retu->mask_pending = true;
++
++}
++
++static void retu_irq_ack(struct irq_data *data)
++{
++	struct retu		*retu = irq_data_get_irq_chip_data(data);
++	int			irq = data->irq;
++
++	retu->ack |= (1 << (irq - retu->irq_base));
++	retu->ack_pending = true;
++}
++
++static void retu_bus_lock(struct irq_data *data)
++{
++	struct retu		*retu = irq_data_get_irq_chip_data(data);
++
++	mutex_lock(&retu->mutex);
++}
++
++static void retu_bus_sync_unlock(struct irq_data *data)
++{
++	struct retu		*retu = irq_data_get_irq_chip_data(data);
++
++	if (retu->mask_pending) {
++		__retu_write_reg(retu, RETU_REG_IMR, retu->mask);
++		retu->mask_pending = false;
++	}
++
++	if (retu->ack_pending) {
++		__retu_write_reg(retu, RETU_REG_IDR, retu->ack);
++		retu->ack_pending = false;
++	}
++
++	mutex_unlock(&retu->mutex);
++}
++
++static struct irq_chip retu_irq_chip = {
++	.name			= "retu",
++	.irq_bus_lock		= retu_bus_lock,
++	.irq_bus_sync_unlock	= retu_bus_sync_unlock,
++	.irq_mask		= retu_irq_mask,
++	.irq_unmask		= retu_irq_unmask,
++	.irq_ack		= retu_irq_ack,
++};
++
++static inline void retu_irq_setup(int irq)
++{
++#ifdef CONFIG_ARM
++	set_irq_flags(irq, IRQF_VALID);
++#else
++	set_irq_noprobe(irq);
++#endif
++}
++
++static void retu_irq_init(struct retu *retu)
++{
++	int			base = retu->irq_base;
++	int			end = retu->irq_end;
++	int			irq;
++
++	for (irq = base; irq < end; irq++) {
++		set_irq_chip_data(irq, retu);
++		set_irq_chip_and_handler(irq, &retu_irq_chip,
++				handle_simple_irq);
++		set_irq_nested_thread(irq, 1);
++		retu_irq_setup(irq);
++	}
++}
++
++static void retu_irq_exit(struct retu *retu)
++{
++	int			base = retu->irq_base;
++	int			end = retu->irq_end;
++	int			irq;
++
++	for (irq = base; irq < end; irq++) {
++#ifdef CONFIG_ARM
++		set_irq_flags(irq, 0);
++#endif
++		set_irq_chip_and_handler(irq, NULL, NULL);
++		set_irq_chip_data(irq, NULL);
++	}
++}
++
++/* -------------------------------------------------------------------------- */
++
++/**
++ * retu_power_off - Shut down power to system
++ *
++ * This function puts the system in power off state
++ */
++static void retu_power_off(void)
++{
++	struct retu		*retu = the_retu;
++	unsigned		reg;
++
++	reg = __retu_read_reg(retu, RETU_REG_CC1);
++
++	/* Ignore power button state */
++	__retu_write_reg(retu, RETU_REG_CC1, reg | 2);
++	/* Expire watchdog immediately */
++	__retu_write_reg(retu, RETU_REG_WATCHDOG, 0);
++	/* Wait for poweroff*/
++	for (;;);
++}
++
++static struct resource generic_resources[] = {
++	{
++		.start	= -EINVAL,	/* fixed later */
++		.flags	= IORESOURCE_IRQ,
++	},
++	{
++		.start	= -EINVAL,	/* fixed later */
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++/**
++ * retu_allocate_child - Allocates one Retu child
++ * @name: name of new child
++ * @parent: parent device for this child
++ */
++static struct device *retu_allocate_child(char *name, struct device *parent,
++		int irq_base, int irq1, int irq2, int num)
++{
++	struct platform_device		*pdev;
++	int				status;
++
++	pdev = platform_device_alloc(name, -1);
++	if (!pdev) {
++		dev_dbg(parent, "can't allocate %s\n", name);
++		goto err;
++	}
++
++	pdev->dev.parent = parent;
++
++	if (num) {
++		generic_resources[0].start = irq_base + irq1;
++		generic_resources[1].start = irq_base + irq2;
++
++		status = platform_device_add_resources(pdev,
++				generic_resources, num);
++		if (status < 0) {
++			dev_dbg(parent, "can't add resources to %s\n", name);
++			goto err;
++		}
++	}
++
++	status = platform_device_add(pdev);
++	if (status < 0) {
++		dev_dbg(parent, "can't add %s\n", name);
++		goto err;
++	}
++
++	return &pdev->dev;
++
++err:
++	platform_device_put(pdev);
++
++	return NULL;
++}
++
++/**
++ * retu_allocate_children - Allocates Retu's children
++ */
++static int retu_allocate_children(struct device *parent, int irq_base)
++{
++	struct device	*child;
++
++	child = retu_allocate_child("retu-pwrbutton", parent, irq_base,
++			RETU_INT_PWR, -1, 1);
++	if (!child)
++		return -ENOMEM;
++
++	child = retu_allocate_child("retu-headset", parent, irq_base,
++			RETU_INT_HOOK, -1, 1);
++	if (!child)
++		return -ENOMEM;
++
++	child = retu_allocate_child("retu-rtc", parent, irq_base,
++			RETU_INT_RTCS, RETU_INT_RTCA, 2);
++	if (!child)
++		return -ENOMEM;
++
++	child = retu_allocate_child("retu-wdt", parent, -1, -1, -1, 0);
++	if (!child)
++		return -ENOMEM;
++
++	return 0;
++}
++
++/**
++ * retu_probe - Probe for Retu ASIC
++ * @dev: the Retu device
++ *
++ * Probe for the Retu ASIC and allocate memory
++ * for its device-struct if found
++ */
++static int __init retu_probe(struct platform_device *pdev)
++{
++	struct retu	*retu;
++	struct cbus_retu_platform_data *pdata = pdev->dev.platform_data;
++
++	int		ret = -ENOMEM;
++	int		rev;
++
++	retu = kzalloc(sizeof(*retu), GFP_KERNEL);
++	if (!retu) {
++		dev_err(&pdev->dev, "not enough memory\n");
++		goto err0;
++	}
++
++	platform_set_drvdata(pdev, retu);
++
++	retu->irq	= platform_get_irq(pdev, 0);
++	retu->irq_base	= pdata->irq_base;
++	retu->irq_end	= pdata->irq_end;
++	retu->devid	= pdata->devid;
++	the_retu	= retu;
++
++	mutex_init(&retu->mutex);
++
++	retu_irq_init(retu);
++
++	rev = __retu_read_reg(retu, RETU_REG_ASICR) & 0xff;
++	if (rev & (1 << 7))
++		retu->is_vilma = true;
++
++	dev_info(&pdev->dev, "%s v%d.%d found\n",
++			retu->is_vilma ? "Vilma" : "Retu",
++			(rev >> 4) & 0x07, rev & 0x0f);
++
++	/* Mask all RETU interrupts */
++	__retu_write_reg(retu, RETU_REG_IMR, 0xffff);
++
++	ret = request_threaded_irq(retu->irq, NULL, retu_irq_handler, 0,
++			  "retu", retu);
++	if (ret < 0) {
++		dev_err(&pdev->dev, "Unable to register IRQ handler\n");
++		goto err1;
++	}
++
++	set_irq_wake(retu->irq, 1);
++
++	/* Register power off function */
++	pm_power_off = retu_power_off;
++
++	ret = retu_allocate_children(&pdev->dev, retu->irq_base);
++	if (ret < 0) {
++		dev_err(&pdev->dev, "Unable to allocate Retu children\n");
++		goto err2;
++	}
++
++	return 0;
++
++err2:
++	pm_power_off = NULL;
++	__retu_write_reg(retu, RETU_REG_IMR, 0xffff);
++	free_irq(retu->irq, retu);
++
++err1:
++	kfree(retu);
++	the_retu = NULL;
++
++err0:
++	return ret;
++}
++
++static int __exit retu_remove(struct platform_device *pdev)
++{
++	struct retu		*retu = platform_get_drvdata(pdev);
++
++	pm_power_off = NULL;
++	the_retu = NULL;
++
++	/* Mask all RETU interrupts */
++	__retu_write_reg(retu, RETU_REG_IMR, 0xffff);
++
++	free_irq(retu->irq, retu);
++	retu_irq_exit(retu);
++	kfree(retu);
++
++	return 0;
++}
++
++static struct platform_driver retu_driver = {
++	.remove		= __exit_p(retu_remove),
++	.driver		= {
++		.name	= "retu",
++	},
++};
++
++static int __init retu_init(void)
++{
++	return platform_driver_probe(&retu_driver, retu_probe);
++}
++subsys_initcall(retu_init);
++
++static void __exit retu_exit(void)
++{
++	platform_driver_unregister(&retu_driver);
++}
++module_exit(retu_exit);
++
++MODULE_DESCRIPTION("Retu ASIC control");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä");
++MODULE_AUTHOR("David Weinehall");
++MODULE_AUTHOR("Mikko Ylinen");
+Index: linux-2.6.38-rc6/drivers/cbus/retu.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/retu.h	2011-02-24 12:04:51.459189067 +0100
+@@ -0,0 +1,66 @@
++/**
++ * drivers/cbus/retu.h
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
++ *	      David Weinehall <david.weinehall@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __DRIVERS_CBUS_RETU_H
++#define __DRIVERS_CBUS_RETU_H
++
++#include <linux/types.h>
++
++/* Registers */
++#define RETU_REG_ASICR		0x00	/* ASIC ID & revision */
++#define RETU_REG_IDR		0x01	/* Interrupt ID */
++#define RETU_REG_IMR		0x02	/* Interrupt mask */
++#define RETU_REG_RTCDSR		0x03	/* RTC seconds register */
++#define RETU_REG_RTCHMR		0x04	/* RTC hours and minutes register */
++#define RETU_REG_RTCHMAR	0x05	/* RTC hours and minutes alarm and time set register */
++#define RETU_REG_RTCCALR	0x06	/* RTC calibration register */
++#define RETU_REG_ADCR		0x08	/* ADC result */
++#define RETU_REG_ADCSCR		0x09	/* ADC sample ctrl */
++#define RETU_REG_CC1		0x0d	/* Common control register 1 */
++#define RETU_REG_CC2		0x0e	/* Common control register 2 */
++#define RETU_REG_CTRL_CLR	0x0f	/* Regulator clear register */
++#define RETU_REG_CTRL_SET	0x10	/* Regulator set register */
++#define RETU_REG_STATUS		0x16	/* Status register */
++#define RETU_REG_WATCHDOG	0x17	/* Watchdog register */
++#define RETU_REG_AUDTXR		0x18	/* Audio Codec Tx register */
++#define RETU_REG_MAX		0x1f
++
++/* Interrupt sources */
++#define RETU_INT_PWR		0
++#define RETU_INT_CHAR		1
++#define RETU_INT_RTCS		2
++#define RETU_INT_RTCM		3
++#define RETU_INT_RTCD		4
++#define RETU_INT_RTCA		5
++#define RETU_INT_HOOK		6
++#define RETU_INT_HEAD		7
++#define RETU_INT_ADCS		8
++
++#define	MAX_RETU_IRQ_HANDLERS	16
++
++int retu_read_reg(struct device *child, unsigned reg);
++void retu_write_reg(struct device *child, unsigned reg, u16 val);
++void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
++		u16 clear);
++int retu_read_adc(struct device *child, int channel);
++
++#endif /* __DRIVERS_CBUS_RETU_H */
+Index: linux-2.6.38-rc6/drivers/cbus/retu-headset.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/retu-headset.c	2011-02-24 12:04:51.460189032 +0100
+@@ -0,0 +1,359 @@
++/**
++ * Retu/Vilma headset detection
++ *
++ * Copyright (C) 2006 Nokia Corporation
++ *
++ * Written by Juha Yrjölä
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/input.h>
++#include <linux/platform_device.h>
++
++#include "retu.h"
++
++#define RETU_ADC_CHANNEL_HOOKDET	0x05
++
++#define RETU_HEADSET_KEY		KEY_PHONE
++
++struct retu_headset {
++	spinlock_t			lock;
++	struct mutex			mutex;
++	struct device			*dev;
++	struct input_dev		*idev;
++	unsigned			bias_enabled;
++	unsigned			detection_enabled;
++	unsigned			pressed;
++	struct timer_list		enable_timer;
++	struct timer_list		detect_timer;
++	int				irq;
++};
++
++static void retu_headset_set_bias(struct retu_headset *hs, int enable)
++{
++	if (enable) {
++		retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR,
++					(1 << 0) | (1 << 1), 0);
++		msleep(2);
++		retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR,
++				1 << 3, 0);
++	} else {
++		retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR, 0,
++					(1 << 0) | (1 << 1) | (1 << 3));
++	}
++}
++
++static void retu_headset_enable(struct retu_headset *hs)
++{
++	mutex_lock(&hs->mutex);
++	if (!hs->bias_enabled) {
++		hs->bias_enabled = 1;
++		retu_headset_set_bias(hs, 1);
++	}
++	mutex_unlock(&hs->mutex);
++}
++
++static void retu_headset_disable(struct retu_headset *hs)
++{
++	mutex_lock(&hs->mutex);
++	if (hs->bias_enabled) {
++		hs->bias_enabled = 0;
++		retu_headset_set_bias(hs, 0);
++	}
++	mutex_unlock(&hs->mutex);
++}
++
++static void retu_headset_det_enable(struct retu_headset *hs)
++{
++	mutex_lock(&hs->mutex);
++	if (!hs->detection_enabled) {
++		hs->detection_enabled = 1;
++		retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1,
++				(1 << 10) | (1 << 8), 0);
++	}
++	mutex_unlock(&hs->mutex);
++}
++
++static void retu_headset_det_disable(struct retu_headset *hs)
++{
++	unsigned long flags;
++
++	mutex_lock(&hs->mutex);
++	if (hs->detection_enabled) {
++		hs->detection_enabled = 0;
++		del_timer_sync(&hs->enable_timer);
++		del_timer_sync(&hs->detect_timer);
++		spin_lock_irqsave(&hs->lock, flags);
++		if (hs->pressed)
++			input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
++		spin_unlock_irqrestore(&hs->lock, flags);
++		retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, 0,
++				(1 << 10) | (1 << 8));
++	}
++	mutex_unlock(&hs->mutex);
++}
++
++static ssize_t retu_headset_hookdet_show(struct device *dev,
++					 struct device_attribute *attr,
++					 char *buf)
++{
++	int val;
++
++	val = retu_read_adc(dev, RETU_ADC_CHANNEL_HOOKDET);
++	return sprintf(buf, "%d\n", val);
++}
++
++static DEVICE_ATTR(hookdet, S_IRUGO, retu_headset_hookdet_show, NULL);
++
++static ssize_t retu_headset_enable_show(struct device *dev,
++					struct device_attribute *attr,
++					char *buf)
++{
++	struct retu_headset *hs = dev_get_drvdata(dev);
++
++	return sprintf(buf, "%u\n", hs->bias_enabled);
++}
++
++static ssize_t retu_headset_enable_store(struct device *dev,
++					 struct device_attribute *attr,
++					 const char *buf, size_t count)
++{
++	struct retu_headset *hs = dev_get_drvdata(dev);
++	int enable;
++
++	if (sscanf(buf, "%u", &enable) != 1)
++		return -EINVAL;
++	if (enable)
++		retu_headset_enable(hs);
++	else
++	        retu_headset_disable(hs);
++	return count;
++}
++
++static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR | S_IWGRP,
++		   retu_headset_enable_show, retu_headset_enable_store);
++
++static ssize_t retu_headset_enable_det_show(struct device *dev,
++					    struct device_attribute *attr,
++					    char *buf)
++{
++	struct retu_headset *hs = dev_get_drvdata(dev);
++
++	return sprintf(buf, "%u\n", hs->detection_enabled);
++}
++
++static ssize_t retu_headset_enable_det_store(struct device *dev,
++					     struct device_attribute *attr,
++					     const char *buf, size_t count)
++{
++	struct retu_headset *hs = dev_get_drvdata(dev);
++	int enable;
++
++	if (sscanf(buf, "%u", &enable) != 1)
++		return -EINVAL;
++	if (enable)
++		retu_headset_det_enable(hs);
++	else
++	        retu_headset_det_disable(hs);
++	return count;
++}
++
++static DEVICE_ATTR(enable_det, S_IRUGO | S_IWUSR | S_IWGRP,
++		   retu_headset_enable_det_show,
++		   retu_headset_enable_det_store);
++
++static irqreturn_t retu_headset_hook_interrupt(int irq, void *_hs)
++{
++	struct retu_headset	*hs = _hs;
++	unsigned long		flags;
++
++	spin_lock_irqsave(&hs->lock, flags);
++	if (!hs->pressed) {
++		/* Headset button was just pressed down. */
++		hs->pressed = 1;
++		input_report_key(hs->idev, RETU_HEADSET_KEY, 1);
++	}
++	spin_unlock_irqrestore(&hs->lock, flags);
++	retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, 0,
++			(1 << 10) | (1 << 8));
++	mod_timer(&hs->enable_timer, jiffies + msecs_to_jiffies(50));
++
++	return IRQ_HANDLED;
++}
++
++static void retu_headset_enable_timer(unsigned long arg)
++{
++	struct retu_headset *hs = (struct retu_headset *) arg;
++
++	retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1,
++			(1 << 10) | (1 << 8), 0);
++	mod_timer(&hs->detect_timer, jiffies + msecs_to_jiffies(350));
++}
++
++static void retu_headset_detect_timer(unsigned long arg)
++{
++	struct retu_headset *hs = (struct retu_headset *) arg;
++	unsigned long flags;
++
++	spin_lock_irqsave(&hs->lock, flags);
++	if (hs->pressed) {
++		hs->pressed = 0;
++		input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
++	}
++	spin_unlock_irqrestore(&hs->lock, flags);
++}
++
++static int __init retu_headset_probe(struct platform_device *pdev)
++{
++	struct retu_headset *hs;
++	int irq;
++	int r;
++
++	hs = kzalloc(sizeof(*hs), GFP_KERNEL);
++	if (hs == NULL)
++		return -ENOMEM;
++
++	hs->dev = &pdev->dev;
++
++	hs->idev = input_allocate_device();
++	if (hs->idev == NULL) {
++		r = -ENOMEM;
++		goto err1;
++	}
++	hs->idev->name = "retu-headset";
++	hs->idev->dev.parent = &pdev->dev;
++	set_bit(EV_KEY, hs->idev->evbit);
++	set_bit(RETU_HEADSET_KEY, hs->idev->keybit);
++	r = input_register_device(hs->idev);
++	if (r < 0)
++		goto err2;
++
++	r = device_create_file(&pdev->dev, &dev_attr_hookdet);
++	if (r < 0)
++		goto err3;
++	r = device_create_file(&pdev->dev, &dev_attr_enable);
++	if (r < 0)
++		goto err4;
++	r = device_create_file(&pdev->dev, &dev_attr_enable_det);
++	if (r < 0)
++		goto err5;
++	platform_set_drvdata(pdev, hs);
++
++	spin_lock_init(&hs->lock);
++	mutex_init(&hs->mutex);
++	setup_timer(&hs->enable_timer, retu_headset_enable_timer,
++		    (unsigned long) hs);
++	setup_timer(&hs->detect_timer, retu_headset_detect_timer,
++		    (unsigned long) hs);
++
++	irq = platform_get_irq(pdev, 0);
++	hs->irq = irq;
++
++	r = request_threaded_irq(irq, NULL, retu_headset_hook_interrupt, 0,
++			"hookdet", hs);
++	if (r != 0) {
++		dev_err(&pdev->dev, "hookdet IRQ not available\n");
++		goto err6;
++	}
++
++	return 0;
++err6:
++	device_remove_file(&pdev->dev, &dev_attr_enable_det);
++err5:
++	device_remove_file(&pdev->dev, &dev_attr_enable);
++err4:
++	device_remove_file(&pdev->dev, &dev_attr_hookdet);
++err3:
++	input_unregister_device(hs->idev);
++err2:
++	input_free_device(hs->idev);
++err1:
++	kfree(hs);
++	return r;
++}
++
++static int retu_headset_remove(struct platform_device *pdev)
++{
++	struct retu_headset *hs = platform_get_drvdata(pdev);
++
++	device_remove_file(&pdev->dev, &dev_attr_hookdet);
++	device_remove_file(&pdev->dev, &dev_attr_enable);
++	device_remove_file(&pdev->dev, &dev_attr_enable_det);
++	retu_headset_disable(hs);
++	retu_headset_det_disable(hs);
++	free_irq(hs->irq, hs);
++	input_unregister_device(hs->idev);
++	input_free_device(hs->idev);
++
++	return 0;
++}
++
++static int retu_headset_suspend(struct platform_device *pdev,
++				pm_message_t mesg)
++{
++	struct retu_headset *hs = platform_get_drvdata(pdev);
++
++	mutex_lock(&hs->mutex);
++	if (hs->bias_enabled)
++		retu_headset_set_bias(hs, 0);
++	mutex_unlock(&hs->mutex);
++
++	return 0;
++}
++
++static int retu_headset_resume(struct platform_device *pdev)
++{
++	struct retu_headset *hs = platform_get_drvdata(pdev);
++
++	mutex_lock(&hs->mutex);
++	if (hs->bias_enabled)
++		retu_headset_set_bias(hs, 1);
++	mutex_unlock(&hs->mutex);
++
++	return 0;
++}
++
++static struct platform_driver retu_headset_driver = {
++	.remove		= retu_headset_remove,
++	.suspend	= retu_headset_suspend,
++	.resume		= retu_headset_resume,
++	.driver		= {
++		.name	= "retu-headset",
++	},
++};
++
++static int __init retu_headset_init(void)
++{
++	return platform_driver_probe(&retu_headset_driver, retu_headset_probe);
++}
++
++static void __exit retu_headset_exit(void)
++{
++	platform_driver_unregister(&retu_headset_driver);
++}
++
++module_init(retu_headset_init);
++module_exit(retu_headset_exit);
++
++MODULE_DESCRIPTION("Retu/Vilma headset detection");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä");
+Index: linux-2.6.38-rc6/drivers/cbus/retu-pwrbutton.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/retu-pwrbutton.c	2011-02-24 12:04:51.460189032 +0100
+@@ -0,0 +1,165 @@
++/**
++ * drivers/cbus/retu-pwrbutton.c
++ *
++ * Driver for sending retu power button event to input-layer
++ *
++ * Copyright (C) 2004-2010 Nokia Corporation
++ *
++ * Written by
++ *	Ari Saastamoinen <ari.saastamoinen@elektrobit.com>
++ *	Juha Yrjola <juha.yrjola@solidboot.com>
++ *
++ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/input.h>
++#include <linux/jiffies.h>
++#include <linux/bitops.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++
++#include "retu.h"
++
++#define RETU_STATUS_PWRONX	(1 << 5)
++
++#define PWRBTN_DELAY		20
++#define PWRBTN_UP		0
++#define PWRBTN_PRESSED		1
++
++struct retu_pwrbutton {
++	struct input_dev	*idev;
++	struct device		*dev;
++
++	int			state;
++	int			irq;
++};
++
++static irqreturn_t retubutton_irq(int irq, void *_pwr)
++{
++	struct retu_pwrbutton *pwr = _pwr;
++	int state;
++
++	if (retu_read_reg(pwr->dev, RETU_REG_STATUS) & RETU_STATUS_PWRONX)
++		state = PWRBTN_UP;
++	else
++		state = PWRBTN_PRESSED;
++
++	if (pwr->state != state) {
++		input_report_key(pwr->idev, KEY_POWER, state);
++		input_sync(pwr->idev);
++		pwr->state = state;
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int __init retubutton_probe(struct platform_device *pdev)
++{
++	struct retu_pwrbutton		*pwr;
++	int				ret = 0;
++
++	pwr = kzalloc(sizeof(*pwr), GFP_KERNEL);
++	if (!pwr) {
++		dev_err(&pdev->dev, "not enough memory\n");
++		ret = -ENOMEM;
++		goto err0;
++	}
++
++	pwr->dev = &pdev->dev;
++	pwr->irq = platform_get_irq(pdev, 0);
++	platform_set_drvdata(pdev, pwr);
++
++	ret = request_threaded_irq(pwr->irq, NULL, retubutton_irq, 0,
++			"retu-pwrbutton", pwr);
++	if (ret < 0) {
++		dev_err(&pdev->dev, "Cannot allocate irq\n");
++		goto err1;
++	}
++
++	pwr->idev = input_allocate_device();
++	if (!pwr->idev) {
++		dev_err(&pdev->dev, "can't allocate input device\n");
++		ret = -ENOMEM;
++		goto err2;
++	}
++
++	pwr->idev->evbit[0] = BIT_MASK(EV_KEY);
++	pwr->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
++	pwr->idev->name = "retu-pwrbutton";
++
++	ret = input_register_device(pwr->idev);
++	if (ret < 0) {
++		dev_err(&pdev->dev, "failed to register input device\n");
++		goto err3;
++	}
++
++	return 0;
++
++err3:
++	input_free_device(pwr->idev);
++
++err2:
++	free_irq(pwr->irq, pwr);
++
++err1:
++	kfree(pwr);
++
++err0:
++	return ret;
++}
++
++static int __exit retubutton_remove(struct platform_device *pdev)
++{
++	struct retu_pwrbutton		*pwr = platform_get_drvdata(pdev);
++
++	free_irq(pwr->irq, pwr);
++	input_unregister_device(pwr->idev);
++	input_free_device(pwr->idev);
++	kfree(pwr);
++
++	return 0;
++}
++
++static struct platform_driver retu_pwrbutton_driver = {
++	.remove		= __exit_p(retubutton_remove),
++	.driver		= {
++		.name	= "retu-pwrbutton",
++	},
++};
++
++static int __init retubutton_init(void)
++{
++	return platform_driver_probe(&retu_pwrbutton_driver, retubutton_probe);
++}
++module_init(retubutton_init);
++
++static void __exit retubutton_exit(void)
++{
++	platform_driver_unregister(&retu_pwrbutton_driver);
++}
++module_exit(retubutton_exit);
++
++MODULE_DESCRIPTION("Retu Power Button");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Ari Saastamoinen");
++MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
++
+Index: linux-2.6.38-rc6/drivers/cbus/retu-rtc.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/retu-rtc.c	2011-02-24 12:04:51.461188993 +0100
+@@ -0,0 +1,287 @@
++/**
++ * drivers/cbus/retu-rtc.c
++ *
++ * Support for Retu RTC
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Paul Mundt <paul.mundt@nokia.com> and
++ *            Igor Stoppa <igor.stoppa@nokia.com>
++ *
++ * The Retu RTC is essentially a partial read-only RTC that gives us Retu's
++ * idea of what time actually is. It's left as a userspace excercise to map
++ * this back to time in the real world and ensure that calibration settings
++ * are sane to compensate for any horrible drift (on account of not being able
++ * to set the clock to anything).
++ *
++ * Days are semi-writeable. Namely, Retu will only track 255 days for us
++ * consecutively, after which the counter is explicitly stuck at 255 until
++ * someone comes along and clears it with a write. In the event that no one
++ * comes along and clears it, we no longer have any idea what day it is.
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/rtc.h>
++
++#include "cbus.h"
++#include "retu.h"
++
++struct retu_rtc {
++	/* device lock */
++	struct mutex		mutex;
++	struct device		*dev;
++	struct rtc_device	*rtc;
++
++	u16			alarm_expired;
++	int			irq_rtcs;
++	int			irq_rtca;
++};
++
++static void retu_rtc_do_reset(struct retu_rtc *rtc)
++{
++	u16 ccr1;
++
++	ccr1 = retu_read_reg(rtc->dev, RETU_REG_CC1);
++	/* RTC in reset */
++	retu_write_reg(rtc->dev, RETU_REG_CC1, ccr1 | 0x0001);
++	/* RTC in normal operating mode */
++	retu_write_reg(rtc->dev, RETU_REG_CC1, ccr1 & ~0x0001);
++
++	/* Disable alarm and RTC WD */
++	retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, 0x7f3f);
++	/* Set Calibration register to default value */
++	retu_write_reg(rtc->dev, RETU_REG_RTCCALR, 0x00c0);
++
++	rtc->alarm_expired = 0;
++}
++
++static irqreturn_t retu_rtc_interrupt(int irq, void *_rtc)
++{
++	struct retu_rtc		*rtc = _rtc;
++
++	mutex_lock(&rtc->mutex);
++	rtc->alarm_expired = 1;
++	retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, (24 << 8) | 60);
++	mutex_unlock(&rtc->mutex);
++
++	return IRQ_HANDLED;
++}
++
++static int retu_rtc_init_irq(struct retu_rtc *rtc)
++{
++	int irq;
++	int ret;
++
++	irq = platform_get_irq(to_platform_device(rtc->dev), 0);
++	rtc->irq_rtcs = irq;
++
++	irq = platform_get_irq(to_platform_device(rtc->dev), 1);
++	rtc->irq_rtca = irq;
++
++	ret = request_threaded_irq(rtc->irq_rtcs, NULL, retu_rtc_interrupt,
++			0, "RTCS", rtc);
++	if (ret != 0)
++		return ret;
++
++	ret = request_threaded_irq(rtc->irq_rtca, NULL, retu_rtc_interrupt,
++			0, "RTCA", rtc);
++	if (ret != 0) {
++		free_irq(rtc->irq_rtcs, rtc);
++		return ret;
++	}
++
++	return 0;
++}
++
++static int retu_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
++{
++	struct retu_rtc		*rtc = dev_get_drvdata(dev);
++	u16			chmar;
++
++	mutex_lock(&rtc->mutex);
++
++	chmar = ((alm->time.tm_hour & 0x1f) << 8) | (alm->time.tm_min & 0x3f);
++	retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, chmar);
++
++	mutex_unlock(&rtc->mutex);
++
++	return 0;
++}
++
++static int retu_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
++{
++	struct retu_rtc		*rtc = dev_get_drvdata(dev);
++	u16			chmar;
++
++	mutex_lock(&rtc->mutex);
++
++	chmar = retu_read_reg(rtc->dev, RETU_REG_RTCHMAR);
++
++	alm->time.tm_hour	= (chmar >> 8) & 0x1f;
++	alm->time.tm_min	= chmar & 0x3f;
++	alm->enabled		= !!rtc->alarm_expired;
++
++	mutex_unlock(&rtc->mutex);
++
++	return 0;
++}
++
++static int retu_rtc_set_time(struct device *dev, struct rtc_time *tm)
++{
++	struct retu_rtc		*rtc = dev_get_drvdata(dev);
++	u16			dsr;
++	u16			hmr;
++
++	dsr = ((tm->tm_mday & 0xff) << 8) | (tm->tm_hour & 0xff);
++	hmr = ((tm->tm_min & 0xff) << 8) | (tm->tm_sec & 0xff);
++
++	mutex_lock(&rtc->mutex);
++
++	retu_write_reg(rtc->dev, RETU_REG_RTCDSR, dsr);
++	retu_write_reg(rtc->dev, RETU_REG_RTCHMR, hmr);
++
++	mutex_unlock(&rtc->mutex);
++
++	return 0;
++}
++
++static int retu_rtc_read_time(struct device *dev, struct rtc_time *tm)
++{
++	struct retu_rtc		*rtc = dev_get_drvdata(dev);
++	u16			dsr;
++	u16			hmr;
++
++	/*
++	 * DSR holds days and hours
++	 * HMR hols minutes and seconds
++	 *
++	 * both are 16 bit registers with 8-bit for each field.
++	 */
++
++	mutex_lock(&rtc->mutex);
++
++	dsr	= retu_read_reg(rtc->dev, RETU_REG_RTCDSR);
++	hmr	= retu_read_reg(rtc->dev, RETU_REG_RTCHMR);
++
++	tm->tm_sec	= hmr & 0xff;
++	tm->tm_min	= hmr >> 8;
++	tm->tm_hour	= dsr & 0xff;
++	tm->tm_mday	= dsr >> 8;
++
++	mutex_unlock(&rtc->mutex);
++
++	return 0;
++}
++
++static struct rtc_class_ops retu_rtc_ops = {
++	.read_time		= retu_rtc_read_time,
++	.set_time		= retu_rtc_set_time,
++	.read_alarm		= retu_rtc_read_alarm,
++	.set_alarm		= retu_rtc_set_alarm,
++};
++
++static int __init retu_rtc_probe(struct platform_device *pdev)
++{
++	struct retu_rtc		*rtc;
++	int			r;
++
++	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
++	if (!rtc) {
++		dev_err(&pdev->dev, "not enough memory\n");
++		r = -ENOMEM;
++		goto err0;
++	}
++
++	rtc->dev = &pdev->dev;
++	platform_set_drvdata(pdev, rtc);
++	mutex_init(&rtc->mutex);
++
++	rtc->alarm_expired = retu_read_reg(rtc->dev, RETU_REG_IDR) &
++		(0x1 << RETU_INT_RTCA);
++
++	r = retu_rtc_init_irq(rtc);
++	if (r < 0) {
++		dev_err(&pdev->dev, "failed to request retu irq\n");
++		goto err1;
++	}
++
++	/* If the calibration register is zero, we've probably lost power */
++	if (!(retu_read_reg(rtc->dev, RETU_REG_RTCCALR) & 0x00ff))
++		retu_rtc_do_reset(rtc);
++
++	rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, &
++			retu_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc->rtc)) {
++		dev_err(&pdev->dev, "can't register RTC device\n");
++		goto err2;
++	}
++
++	return 0;
++
++err2:
++	free_irq(rtc->irq_rtcs, rtc);
++	free_irq(rtc->irq_rtca, rtc);
++
++err1:
++	kfree(rtc);
++
++err0:
++	return r;
++}
++
++static int __devexit retu_rtc_remove(struct platform_device *pdev)
++{
++	struct retu_rtc		*rtc = platform_get_drvdata(pdev);
++
++	free_irq(rtc->irq_rtcs, rtc);
++	free_irq(rtc->irq_rtca, rtc);
++	rtc_device_unregister(rtc->rtc);
++	kfree(rtc);
++
++	return 0;
++}
++
++static struct platform_driver retu_rtc_driver = {
++	.remove		= __exit_p(retu_rtc_remove),
++	.driver		= {
++		.name	= "retu-rtc",
++	},
++};
++
++static int __init retu_rtc_init(void)
++{
++	return platform_driver_probe(&retu_rtc_driver, retu_rtc_probe);
++}
++module_init(retu_rtc_init);
++
++static void __exit retu_rtc_exit(void)
++{
++	platform_driver_unregister(&retu_rtc_driver);
++}
++module_exit(retu_rtc_exit);
++
++MODULE_DESCRIPTION("Retu RTC");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Paul Mundt");
++MODULE_AUTHOR("Igor Stoppa");
++MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
++
+Index: linux-2.6.38-rc6/drivers/cbus/retu-wdt.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/retu-wdt.c	2011-02-24 12:04:51.461188993 +0100
+@@ -0,0 +1,358 @@
++/**
++ * drivers/cbus/retu-wdt.c
++ *
++ * Driver for Retu watchdog
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Amit Kucheria <amit.kucheria@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/io.h>
++#include <linux/platform_device.h>
++
++#include <linux/completion.h>
++#include <linux/errno.h>
++#include <linux/moduleparam.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++
++#include <asm/uaccess.h>
++
++#include <plat/prcm.h>
++
++#include "cbus.h"
++#include "retu.h"
++
++/* Watchdog timeout in seconds */
++#define RETU_WDT_MIN_TIMER 0
++#define RETU_WDT_DEFAULT_TIMER 32
++#define RETU_WDT_MAX_TIMER 63
++
++static DEFINE_MUTEX(retu_wdt_mutex);
++
++/* Current period of watchdog */
++static unsigned int period_val = RETU_WDT_DEFAULT_TIMER;
++static int counter_param = RETU_WDT_MAX_TIMER;
++
++struct retu_wdt_dev {
++	struct device		*dev;
++	int			users;
++	struct miscdevice	retu_wdt_miscdev;
++	struct timer_list	ping_timer;
++};
++
++static struct retu_wdt_dev *retu_wdt;
++
++static void retu_wdt_set_ping_timer(unsigned long enable);
++
++static int _retu_modify_counter(unsigned int new)
++{
++	if (retu_wdt)
++		retu_write_reg(retu_wdt->dev, RETU_REG_WATCHDOG, (u16)new);
++
++	return 0;
++}
++
++static int retu_modify_counter(unsigned int new)
++{
++	if (new < RETU_WDT_MIN_TIMER || new > RETU_WDT_MAX_TIMER)
++		return -EINVAL;
++
++	mutex_lock(&retu_wdt_mutex);
++	period_val = new;
++	_retu_modify_counter(period_val);
++	mutex_unlock(&retu_wdt_mutex);
++
++	return 0;
++}
++
++static ssize_t retu_wdt_period_show(struct device *dev,
++				struct device_attribute *attr, char *buf)
++{
++	/* Show current max counter */
++	return sprintf(buf, "%u\n", (u16)period_val);
++}
++
++/*
++ * Note: This inteface is non-standard and likely to disappear!
++ * Use /dev/watchdog instead, that's the standard.
++ */
++static ssize_t retu_wdt_period_store(struct device *dev,
++				struct device_attribute *attr,
++				const char *buf, size_t count)
++{
++	unsigned int new_period;
++	int ret;
++
++#ifdef CONFIG_WATCHDOG_NOWAYOUT
++	retu_wdt_set_ping_timer(0);
++#endif
++
++	if (sscanf(buf, "%u", &new_period) != 1) {
++		printk(KERN_ALERT "retu_wdt_period_store: Invalid input\n");
++		return -EINVAL;
++	}
++
++	ret = retu_modify_counter(new_period);
++	if (ret < 0)
++		return ret;
++
++	return strnlen(buf, count);
++}
++
++static ssize_t retu_wdt_counter_show(struct device *dev,
++				struct device_attribute *attr, char *buf)
++{
++	u16 counter;
++
++	/* Show current value in watchdog counter */
++	counter = retu_read_reg(dev, RETU_REG_WATCHDOG);
++
++	/* Only the 5 LSB are important */
++	return snprintf(buf, PAGE_SIZE, "%u\n", (counter & 0x3F));
++}
++
++static DEVICE_ATTR(period, S_IRUGO | S_IWUSR, retu_wdt_period_show, \
++			retu_wdt_period_store);
++static DEVICE_ATTR(counter, S_IRUGO, retu_wdt_counter_show, NULL);
++
++/*----------------------------------------------------------------------------*/
++
++/*
++ * Since retu watchdog cannot be disabled in hardware, we must kick it
++ * with a timer until userspace watchdog software takes over. Do this
++ * unless /dev/watchdog is open or CONFIG_WATCHDOG_NOWAYOUT is set.
++ */
++static void retu_wdt_set_ping_timer(unsigned long enable)
++{
++	_retu_modify_counter(RETU_WDT_MAX_TIMER);
++	if (enable)
++		mod_timer(&retu_wdt->ping_timer,
++				jiffies + RETU_WDT_DEFAULT_TIMER * HZ);
++	else
++		del_timer_sync(&retu_wdt->ping_timer);
++}
++
++static int retu_wdt_open(struct inode *inode, struct file *file)
++{
++	if (test_and_set_bit(1, (unsigned long *)&(retu_wdt->users)))
++		return -EBUSY;
++
++	file->private_data = (void *)retu_wdt;
++	retu_wdt_set_ping_timer(0);
++
++	return nonseekable_open(inode, file);
++}
++
++static int retu_wdt_release(struct inode *inode, struct file *file)
++{
++	struct retu_wdt_dev *wdev = file->private_data;
++
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++	retu_wdt_set_ping_timer(1);
++#endif
++	wdev->users = 0;
++
++	return 0;
++}
++
++static ssize_t retu_wdt_write(struct file *file, const char __user *data,
++						size_t len, loff_t *ppos)
++{
++	if (len)
++		retu_modify_counter(RETU_WDT_MAX_TIMER);
++
++	return len;
++}
++
++static long retu_wdt_ioctl(struct file *file, unsigned int cmd,
++			   unsigned long arg)
++{
++	int new_margin;
++
++	static struct watchdog_info ident = {
++		.identity = "Retu Watchdog",
++		.options = WDIOF_SETTIMEOUT,
++		.firmware_version = 0,
++	};
++
++	switch (cmd) {
++	default:
++		return -ENOTTY;
++	case WDIOC_GETSUPPORT:
++		return copy_to_user((struct watchdog_info __user *)arg, &ident,
++							sizeof(ident));
++	case WDIOC_GETSTATUS:
++		return put_user(0, (int __user *)arg);
++	case WDIOC_GETBOOTSTATUS:
++		if (cpu_is_omap16xx())
++			return put_user(omap_readw(ARM_SYSST),
++					(int __user *)arg);
++		if (cpu_is_omap24xx())
++			return put_user(omap_prcm_get_reset_sources(),
++					(int __user *)arg);
++	case WDIOC_KEEPALIVE:
++		retu_modify_counter(RETU_WDT_MAX_TIMER);
++		break;
++	case WDIOC_SETTIMEOUT:
++		if (get_user(new_margin, (int __user *)arg))
++			return -EFAULT;
++		retu_modify_counter(new_margin);
++		/* Fall through */
++	case WDIOC_GETTIMEOUT:
++		return put_user(period_val, (int __user *)arg);
++	}
++
++	return 0;
++}
++
++/* Start kicking retu watchdog until user space starts doing the kicking */
++static int __devinit retu_wdt_ping(void)
++{
++#ifdef CONFIG_WATCHDOG_NOWAYOUT
++	retu_modify_counter(RETU_WDT_MAX_TIMER);
++#else
++	retu_wdt_set_ping_timer(1);
++#endif
++
++	return 0;
++}
++
++static const struct file_operations retu_wdt_fops = {
++	.owner		= THIS_MODULE,
++	.write		= retu_wdt_write,
++	.unlocked_ioctl	= retu_wdt_ioctl,
++	.open		= retu_wdt_open,
++	.release	= retu_wdt_release,
++};
++
++/*----------------------------------------------------------------------------*/
++
++static int __init retu_wdt_probe(struct platform_device *pdev)
++{
++	struct retu_wdt_dev *wdev;
++	int ret;
++
++	wdev = kzalloc(sizeof(struct retu_wdt_dev), GFP_KERNEL);
++	if (!wdev)
++		return -ENOMEM;
++
++	wdev->dev = &pdev->dev;
++	wdev->users = 0;
++
++	ret = device_create_file(&pdev->dev, &dev_attr_period);
++	if (ret) {
++		dev_err(&pdev->dev, "Error creating sysfs period\n");
++		goto free1;
++	}
++
++	ret = device_create_file(&pdev->dev, &dev_attr_counter);
++	if (ret) {
++		dev_err(&pdev->dev, "Error creating sysfs counter\n");
++		goto free2;
++	}
++
++	platform_set_drvdata(pdev, wdev);
++	retu_wdt = wdev;
++	wdev->retu_wdt_miscdev.parent = &pdev->dev;
++	wdev->retu_wdt_miscdev.minor = WATCHDOG_MINOR;
++	wdev->retu_wdt_miscdev.name = "watchdog";
++	wdev->retu_wdt_miscdev.fops = &retu_wdt_fops;
++
++	ret = misc_register(&(wdev->retu_wdt_miscdev));
++	if (ret)
++		goto free3;
++
++	setup_timer(&wdev->ping_timer, retu_wdt_set_ping_timer, 1);
++
++	/* passed as module parameter? */
++	ret = retu_modify_counter(counter_param);
++	if (ret == -EINVAL) {
++		ret = retu_modify_counter(RETU_WDT_DEFAULT_TIMER);
++		dev_dbg(&pdev->dev, "Initializing to default value\n");
++	}
++
++	/* Kick the watchdog for kernel booting to finish */
++	retu_modify_counter(RETU_WDT_MAX_TIMER);
++
++	ret = retu_wdt_ping();
++	if (ret < 0) {
++		dev_err(&pdev->dev, "Failed to ping\n");
++		goto free4;
++	}
++
++	return 0;
++
++free4:
++	misc_deregister(&wdev->retu_wdt_miscdev);
++
++free3:
++	device_remove_file(&pdev->dev, &dev_attr_counter);
++
++free2:
++	device_remove_file(&pdev->dev, &dev_attr_period);
++
++free1:
++	kfree(wdev);
++
++	return ret;
++}
++
++static int __devexit retu_wdt_remove(struct platform_device *pdev)
++{
++	struct retu_wdt_dev *wdev;
++
++	wdev = platform_get_drvdata(pdev);
++	misc_deregister(&wdev->retu_wdt_miscdev);
++	device_remove_file(&pdev->dev, &dev_attr_period);
++	device_remove_file(&pdev->dev, &dev_attr_counter);
++	kfree(wdev);
++
++	return 0;
++}
++
++static struct platform_driver retu_wdt_driver = {
++	.remove		= __exit_p(retu_wdt_remove),
++	.driver		= {
++		.name	= "retu-wdt",
++	},
++};
++
++static int __init retu_wdt_init(void)
++{
++	return platform_driver_probe(&retu_wdt_driver, retu_wdt_probe);
++}
++
++static void __exit retu_wdt_exit(void)
++{
++	platform_driver_unregister(&retu_wdt_driver);
++}
++
++module_init(retu_wdt_init);
++module_exit(retu_wdt_exit);
++module_param(counter_param, int, 0);
++
++MODULE_DESCRIPTION("Retu WatchDog");
++MODULE_AUTHOR("Amit Kucheria");
++MODULE_LICENSE("GPL");
++
+Index: linux-2.6.38-rc6/drivers/cbus/tahvo.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/tahvo.c	2011-02-24 12:04:51.463188907 +0100
+@@ -0,0 +1,391 @@
++/**
++ * drivers/cbus/tahvo.c
++ *
++ * Support functions for Tahvo ASIC
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
++ *	      David Weinehall <david.weinehall@nokia.com>, and
++ *	      Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++#include <linux/miscdevice.h>
++#include <linux/poll.h>
++#include <linux/fs.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#include <asm/uaccess.h>
++#include <asm/mach-types.h>
++
++#include <plat/mux.h>
++#include <plat/board.h>
++
++#include "cbus.h"
++#include "tahvo.h"
++
++#define TAHVO_ID		0x02
++#define PFX			"tahvo: "
++
++static int tahvo_initialized;
++static int tahvo_is_betty;
++
++static struct tasklet_struct tahvo_tasklet;
++spinlock_t tahvo_lock = SPIN_LOCK_UNLOCKED;
++
++struct tahvo_irq_handler_desc {
++	int (*func)(unsigned long);
++	unsigned long arg;
++	char name[8];
++};
++
++static struct tahvo_irq_handler_desc tahvo_irq_handlers[MAX_TAHVO_IRQ_HANDLERS];
++
++int tahvo_get_status(void)
++{
++	return tahvo_initialized;
++}
++EXPORT_SYMBOL(tahvo_get_status);
++
++/**
++ * tahvo_read_reg - Read a value from a register in Tahvo
++ * @reg: the register to read from
++ *
++ * This function returns the contents of the specified register
++ */
++int tahvo_read_reg(unsigned reg)
++{
++	BUG_ON(!tahvo_initialized);
++	return cbus_read_reg(TAHVO_ID, reg);
++}
++EXPORT_SYMBOL(tahvo_read_reg);
++
++/**
++ * tahvo_write_reg - Write a value to a register in Tahvo
++ * @reg: the register to write to
++ * @reg: the value to write to the register
++ *
++ * This function writes a value to the specified register
++ */
++void tahvo_write_reg(unsigned reg, u16 val)
++{
++	BUG_ON(!tahvo_initialized);
++	cbus_write_reg(TAHVO_ID, reg, val);
++}
++EXPORT_SYMBOL(tahvo_write_reg);
++
++/**
++ * tahvo_set_clear_reg_bits - set and clear register bits atomically
++ * @reg: the register to write to
++ * @bits: the bits to set
++ *
++ * This function sets and clears the specified Tahvo register bits atomically
++ */
++void tahvo_set_clear_reg_bits(unsigned reg, u16 set, u16 clear)
++{
++	unsigned long flags;
++	u16 w;
++
++	spin_lock_irqsave(&tahvo_lock, flags);
++	w = tahvo_read_reg(reg);
++	w &= ~clear;
++	w |= set;
++	tahvo_write_reg(reg, w);
++	spin_unlock_irqrestore(&tahvo_lock, flags);
++}
++
++/*
++ * Disable given TAHVO interrupt
++ */
++void tahvo_disable_irq(int id)
++{
++	unsigned long flags;
++	u16 mask;
++
++	spin_lock_irqsave(&tahvo_lock, flags);
++	mask = tahvo_read_reg(TAHVO_REG_IMR);
++	mask |= 1 << id;
++	tahvo_write_reg(TAHVO_REG_IMR, mask);
++	spin_unlock_irqrestore(&tahvo_lock, flags);
++}
++EXPORT_SYMBOL(tahvo_disable_irq);
++
++/*
++ * Enable given TAHVO interrupt
++ */
++void tahvo_enable_irq(int id)
++{
++	unsigned long flags;
++	u16 mask;
++
++	spin_lock_irqsave(&tahvo_lock, flags);
++	mask = tahvo_read_reg(TAHVO_REG_IMR);
++	mask &= ~(1 << id);
++	tahvo_write_reg(TAHVO_REG_IMR, mask);
++	spin_unlock_irqrestore(&tahvo_lock, flags);
++}
++EXPORT_SYMBOL(tahvo_enable_irq);
++
++/*
++ * Acknowledge given TAHVO interrupt
++ */
++void tahvo_ack_irq(int id)
++{
++	tahvo_write_reg(TAHVO_REG_IDR, 1 << id);
++}
++EXPORT_SYMBOL(tahvo_ack_irq);
++
++static int tahvo_7bit_backlight;
++
++int tahvo_get_backlight_level(void)
++{
++	int mask;
++
++	if (tahvo_7bit_backlight)
++		mask = 0x7f;
++	else
++		mask = 0x0f;
++	return tahvo_read_reg(TAHVO_REG_LEDPWMR) & mask;
++}
++EXPORT_SYMBOL(tahvo_get_backlight_level);
++
++int tahvo_get_max_backlight_level(void)
++{
++	if (tahvo_7bit_backlight)
++		return 0x7f;
++	else
++		return 0x0f;
++}
++EXPORT_SYMBOL(tahvo_get_max_backlight_level);
++
++void tahvo_set_backlight_level(int level)
++{
++	int max_level;
++
++	max_level = tahvo_get_max_backlight_level();
++	if (level > max_level)
++		level = max_level;
++	tahvo_write_reg(TAHVO_REG_LEDPWMR, level);
++}
++EXPORT_SYMBOL(tahvo_set_backlight_level);
++
++/*
++ * TAHVO interrupt handler. Only schedules the tasklet.
++ */
++static irqreturn_t tahvo_irq_handler(int irq, void *dev_id)
++{
++	tasklet_schedule(&tahvo_tasklet);
++	return IRQ_HANDLED;
++}
++
++/*
++ * Tasklet handler
++ */
++static void tahvo_tasklet_handler(unsigned long data)
++{
++	struct tahvo_irq_handler_desc *hnd;
++	u16 id;
++	u16 im;
++	int i;
++
++	for (;;) {
++		id = tahvo_read_reg(TAHVO_REG_IDR);
++		im = ~tahvo_read_reg(TAHVO_REG_IMR);
++		id &= im;
++
++		if (!id)
++			break;
++
++		for (i = 0; id != 0; i++, id >>= 1) {
++			if (!(id & 1))
++				continue;
++			hnd = &tahvo_irq_handlers[i];
++			if (hnd->func == NULL) {
++				/* Spurious tahvo interrupt - just ack it */
++				printk(KERN_INFO "Spurious Tahvo interrupt "
++						 "(id %d)\n", i);
++				tahvo_disable_irq(i);
++				tahvo_ack_irq(i);
++				continue;
++			}
++			hnd->func(hnd->arg);
++			/*
++			 * Don't acknowledge the interrupt here
++			 * It must be done explicitly
++			 */
++		}
++	}
++}
++
++/*
++ * Register the handler for a given TAHVO interrupt source.
++ */
++int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name)
++{
++	struct tahvo_irq_handler_desc *hnd;
++
++	if (irq_handler == NULL || id >= MAX_TAHVO_IRQ_HANDLERS ||
++	    name == NULL) {
++		printk(KERN_ERR PFX "Invalid arguments to %s\n",
++		       __FUNCTION__);
++		return -EINVAL;
++	}
++	hnd = &tahvo_irq_handlers[id];
++	if (hnd->func != NULL) {
++		printk(KERN_ERR PFX "IRQ %d already reserved\n", id);
++		return -EBUSY;
++	}
++	printk(KERN_INFO PFX "Registering interrupt %d for device %s\n",
++	       id, name);
++	hnd->func = irq_handler;
++	hnd->arg = arg;
++	strlcpy(hnd->name, name, sizeof(hnd->name));
++
++	tahvo_ack_irq(id);
++	tahvo_enable_irq(id);
++
++	return 0;
++}
++EXPORT_SYMBOL(tahvo_request_irq);
++
++/*
++ * Unregister the handler for a given TAHVO interrupt source.
++ */
++void tahvo_free_irq(int id)
++{
++	struct tahvo_irq_handler_desc *hnd;
++
++	if (id >= MAX_TAHVO_IRQ_HANDLERS) {
++		printk(KERN_ERR PFX "Invalid argument to %s\n",
++		       __FUNCTION__);
++		return;
++	}
++	hnd = &tahvo_irq_handlers[id];
++	if (hnd->func == NULL) {
++		printk(KERN_ERR PFX "IRQ %d already freed\n", id);
++		return;
++	}
++
++	tahvo_disable_irq(id);
++	hnd->func = NULL;
++}
++EXPORT_SYMBOL(tahvo_free_irq);
++
++/**
++ * tahvo_probe - Probe for Tahvo ASIC
++ * @dev: the Tahvo device
++ *
++ * Probe for the Tahvo ASIC and allocate memory
++ * for its device-struct if found
++ */
++static int __init tahvo_probe(struct platform_device *pdev)
++{
++	int rev, id, ret;
++	int irq;
++
++	/* Prepare tasklet */
++	tasklet_init(&tahvo_tasklet, tahvo_tasklet_handler, 0);
++
++	tahvo_initialized = 1;
++
++	rev = tahvo_read_reg(TAHVO_REG_ASICR);
++
++	id = (rev >> 8) & 0xff;
++	if (id == 0x03) {
++		if ((rev & 0xff) >= 0x50)
++			tahvo_7bit_backlight = 1;
++	} else if (id == 0x0b) {
++		tahvo_is_betty = 1;
++		tahvo_7bit_backlight = 1;
++	} else {
++		dev_err(&pdev->dev, "Tahvo/Betty chip not found");
++		return -ENODEV;
++	}
++
++	dev_err(&pdev->dev, "%s v%d.%d found\n", tahvo_is_betty ? "Betty" : "Tahvo",
++	       (rev >> 4) & 0x0f, rev & 0x0f);
++
++	irq = platform_get_irq(pdev, 0);
++
++	/* Mask all TAHVO interrupts */
++	tahvo_write_reg(TAHVO_REG_IMR, 0xffff);
++
++	ret = request_irq(irq, tahvo_irq_handler, IRQF_TRIGGER_RISING,
++			"tahvo", 0);
++	if (ret < 0) {
++		dev_err(&pdev->dev, "Unable to register IRQ handler\n");
++		return ret;
++	}
++	return 0;
++}
++
++static int __exit tahvo_remove(struct platform_device *pdev)
++{
++	int irq;
++
++	irq = platform_get_irq(pdev, 0);
++
++	/* Mask all TAHVO interrupts */
++	tahvo_write_reg(TAHVO_REG_IMR, 0xffff);
++	free_irq(irq, 0);
++	tasklet_kill(&tahvo_tasklet);
++
++	return 0;
++}
++
++static struct platform_driver tahvo_driver = {
++	.remove		= __exit_p(tahvo_remove),
++	.driver		= {
++		.name	= "tahvo",
++	},
++};
++
++/**
++ * tahvo_init - initialise Tahvo driver
++ *
++ * Initialise the Tahvo driver and return 0 if everything worked ok
++ */
++static int __init tahvo_init(void)
++{
++	return platform_driver_probe(&tahvo_driver, tahvo_probe);
++}
++
++/*
++ * Cleanup
++ */
++static void __exit tahvo_exit(void)
++{
++	platform_driver_unregister(&tahvo_driver);
++}
++
++subsys_initcall(tahvo_init);
++module_exit(tahvo_exit);
++
++MODULE_DESCRIPTION("Tahvo ASIC control");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä");
++MODULE_AUTHOR("David Weinehall");
++MODULE_AUTHOR("Mikko Ylinen");
++
+Index: linux-2.6.38-rc6/drivers/cbus/tahvo.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/tahvo.h	2011-02-24 12:04:51.463188907 +0100
+@@ -0,0 +1,57 @@
++/*
++ * drivers/cbus/tahvo.h
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
++ *	      David Weinehall <david.weinehall@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __DRIVERS_CBUS_TAHVO_H
++#define __DRIVERS_CBUS_TAHVO_H
++
++#include <linux/types.h>
++
++/* Registers */
++#define TAHVO_REG_ASICR		0x00	/* ASIC ID & revision */
++#define TAHVO_REG_IDR		0x01	/* Interrupt ID */
++#define TAHVO_REG_IDSR		0x02	/* Interrupt status */
++#define TAHVO_REG_IMR		0x03	/* Interrupt mask */
++#define TAHVO_REG_LEDPWMR	0x05	/* LED PWM */
++#define TAHVO_REG_USBR		0x06	/* USB control */
++#define TAHVO_REG_MAX		0x0d
++
++/* Interrupt sources */
++#define TAHVO_INT_VBUSON	0
++
++#define MAX_TAHVO_IRQ_HANDLERS	8
++
++int tahvo_get_status(void);
++int tahvo_read_reg(unsigned reg);
++void tahvo_write_reg(unsigned reg, u16 val);
++void tahvo_set_clear_reg_bits(unsigned reg, u16 set, u16 clear);
++int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
++void tahvo_free_irq(int id);
++void tahvo_enable_irq(int id);
++void tahvo_disable_irq(int id);
++void tahvo_ack_irq(int id);
++int tahvo_get_backlight_level(void);
++int tahvo_get_max_backlight_level(void);
++void tahvo_set_backlight_level(int level);
++
++extern spinlock_t tahvo_lock;
++
++#endif /* __DRIVERS_CBUS_TAHVO_H */
+Index: linux-2.6.38-rc6/drivers/cbus/tahvo-usb.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/tahvo-usb.c	2011-02-24 12:04:51.464188862 +0100
+@@ -0,0 +1,773 @@
++/**
++ * drivers/cbus/tahvo-usb.c
++ *
++ * Tahvo USB transeiver
++ *
++ * Copyright (C) 2005-2006 Nokia Corporation
++ *
++ * Parts copied from drivers/i2c/chips/isp1301_omap.c
++ * Copyright (C) 2004 Texas Instruments
++ * Copyright (C) 2004 David Brownell
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
++ *	      Tony Lindgren <tony@atomide.com>, and
++ *	      Timo Teräs <timo.teras@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ch9.h>
++#include <linux/usb/gadget.h>
++#include <linux/usb.h>
++#include <linux/usb/otg.h>
++#include <linux/i2c.h>
++#include <linux/workqueue.h>
++#include <linux/kobject.h>
++#include <linux/clk.h>
++#include <linux/mutex.h>
++
++#include <asm/irq.h>
++#include <plat/usb.h>
++
++#include "cbus.h"
++#include "tahvo.h"
++
++#define DRIVER_NAME     "tahvo-usb"
++
++#define USBR_SLAVE_CONTROL	(1 << 8)
++#define USBR_VPPVIO_SW		(1 << 7)
++#define USBR_SPEED		(1 << 6)
++#define USBR_REGOUT		(1 << 5)
++#define USBR_MASTER_SW2		(1 << 4)
++#define USBR_MASTER_SW1		(1 << 3)
++#define USBR_SLAVE_SW		(1 << 2)
++#define USBR_NSUSPEND		(1 << 1)
++#define USBR_SEMODE		(1 << 0)
++
++/* bits in OTG_CTRL */
++
++/* Bits that are controlled by OMAP OTG and are read-only */
++#define OTG_CTRL_OMAP_MASK	(OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|\
++				OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
++/* Bits that are controlled by transceiver */
++#define OTG_CTRL_XCVR_MASK	(OTG_ASESSVLD|OTG_BSESSEND|\
++				OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
++/* Bits that are controlled by system */
++#define OTG_CTRL_SYS_MASK	(OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|\
++				OTG_B_HNPEN|OTG_BUSDROP)
++
++#if defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OTG)
++#error tahvo-otg.c does not work with OCHI yet!
++#endif
++
++#define TAHVO_MODE_HOST		0
++#define TAHVO_MODE_PERIPHERAL	1
++
++#ifdef CONFIG_USB_OTG
++#define TAHVO_MODE(tu)		(tu)->tahvo_mode
++#elif defined(CONFIG_USB_GADGET_OMAP)
++#define TAHVO_MODE(tu)		TAHVO_MODE_PERIPHERAL
++#else
++#define TAHVO_MODE(tu)		TAHVO_MODE_HOST
++#endif
++
++struct tahvo_usb {
++	struct platform_device *pt_dev;
++	struct otg_transceiver otg;
++	int vbus_state;
++	struct work_struct irq_work;
++	struct mutex serialize;
++#ifdef CONFIG_USB_OTG
++	int tahvo_mode;
++#endif
++};
++static struct platform_device tahvo_usb_device;
++
++/*
++ * ---------------------------------------------------------------------------
++ * OTG related functions
++ *
++ * These shoud be separated into omap-otg.c driver module, as they are used
++ * by various transceivers. These functions are needed in the UDC-only case
++ * as well. These functions are copied from GPL isp1301_omap.c
++ * ---------------------------------------------------------------------------
++ */
++static struct platform_device *tahvo_otg_dev;
++
++static irqreturn_t omap_otg_irq(int irq, void *arg)
++{
++	struct platform_device *otg_dev = arg;
++	struct tahvo_usb *tu = platform_get_drvdata(otg_dev);
++	u16 otg_irq;
++
++	otg_irq = omap_readw(OTG_IRQ_SRC);
++	if (otg_irq & OPRT_CHG) {
++		omap_writew(OPRT_CHG, OTG_IRQ_SRC);
++	} else if (otg_irq & B_SRP_TMROUT) {
++		omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
++	} else if (otg_irq & B_HNP_FAIL) {
++		omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
++	} else if (otg_irq & A_SRP_DETECT) {
++		omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
++	} else if (otg_irq & A_REQ_TMROUT) {
++		omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
++	} else if (otg_irq & A_VBUS_ERR) {
++		omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
++	} else if (otg_irq & DRIVER_SWITCH) {
++#ifdef CONFIG_USB_OTG
++		if ((!(omap_readl(OTG_CTRL) & OTG_DRIVER_SEL)) &&
++		   tu->otg.host && tu->otg.state == OTG_STATE_A_HOST) {
++			/* role is host */
++			usb_bus_start_enum(tu->otg.host,
++					   tu->otg.host->otg_port);
++		}
++#endif
++		omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
++	} else
++		return IRQ_NONE;
++
++	return IRQ_HANDLED;
++
++}
++
++static int tahvo_otg_init(void)
++{
++	u32 l;
++
++#ifdef CONFIG_USB_OTG
++	if (!tahvo_otg_dev) {
++		printk("tahvo-usb: no tahvo_otg_dev\n");
++		return -ENODEV;
++	}
++#endif
++
++	l = omap_readl(OTG_SYSCON_1);
++	l &= ~OTG_IDLE_EN;
++	omap_writel(l, OTG_SYSCON_1);
++	udelay(100);
++
++	/* some of these values are board-specific... */
++	l = omap_readl(OTG_SYSCON_2);
++	l |= OTG_EN
++		/* for B-device: */
++		| SRP_GPDATA		/* 9msec Bdev D+ pulse */
++		| SRP_GPDVBUS		/* discharge after VBUS pulse */
++		// | (3 << 24)		/* 2msec VBUS pulse */
++		/* for A-device: */
++		| (0 << 20)		/* 200ms nominal A_WAIT_VRISE timer */
++		| SRP_DPW		/* detect 167+ns SRP pulses */
++		| SRP_DATA | SRP_VBUS;	/* accept both kinds of SRP pulse */
++	omap_writel(l, OTG_SYSCON_2);
++
++	omap_writew(DRIVER_SWITCH | OPRT_CHG
++			| B_SRP_TMROUT | B_HNP_FAIL
++				  | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT,
++					OTG_IRQ_EN);
++	l = omap_readl(OTG_SYSCON_2);
++	l |= OTG_EN;
++	omap_writel(l, OTG_SYSCON_2);
++
++	return 0;
++}
++
++static int __init omap_otg_probe(struct platform_device *pdev)
++{
++	int ret;
++
++	tahvo_otg_dev = pdev;
++	ret = tahvo_otg_init();
++	if (ret != 0) {
++		printk(KERN_ERR "tahvo-usb: tahvo_otg_init failed\n");
++		return ret;
++	}
++
++	return request_irq(tahvo_otg_dev->resource[1].start,
++			   omap_otg_irq, IRQF_DISABLED, DRIVER_NAME,
++			   &tahvo_usb_device);
++}
++
++static int __exit omap_otg_remove(struct platform_device *pdev)
++{
++	free_irq(tahvo_otg_dev->resource[1].start, &tahvo_usb_device);
++	tahvo_otg_dev = NULL;
++
++	return 0;
++}
++
++struct platform_driver omap_otg_driver = {
++	.driver		= {
++		.name	= "omap_otg",
++	},
++	.remove		= __exit_p(omap_otg_remove),
++};
++
++/*
++ * ---------------------------------------------------------------------------
++ * Tahvo related functions
++ * These are Nokia proprietary code, except for the OTG register settings,
++ * which are copied from isp1301.c
++ * ---------------------------------------------------------------------------
++ */
++static ssize_t vbus_state_show(struct device *device,
++			       struct device_attribute *attr, char *buf)
++{
++	struct tahvo_usb *tu = dev_get_drvdata(device);
++	return sprintf(buf, "%d\n", tu->vbus_state);
++}
++static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL);
++
++int vbus_active = 0;
++
++#if 0
++
++static int host_suspend(struct tahvo_usb *tu)
++{
++	struct device	*dev;
++
++	if (!tu->otg.host)
++		return -ENODEV;
++
++	/* Currently ASSUMES only the OTG port matters;
++	 * other ports could be active...
++	 */
++	dev = tu->otg.host->controller;
++	return dev->driver->suspend(dev, PMSG_SUSPEND);
++}
++
++static int host_resume(struct tahvo_usb *tu)
++{
++	struct device	*dev;
++
++	if (!tu->otg.host)
++		return -ENODEV;
++
++	dev = tu->otg.host->controller;
++	return dev->driver->resume(dev);
++}
++
++#else
++
++static int host_suspend(struct tahvo_usb *tu)
++{
++	return 0;
++}
++
++static int host_resume(struct tahvo_usb *tu)
++{
++	return 0;
++}
++
++#endif
++
++static void check_vbus_state(struct tahvo_usb *tu)
++{
++	int reg, prev_state;
++
++	reg = tahvo_read_reg(TAHVO_REG_IDSR);
++	if (reg & 0x01) {
++		u32 l;
++
++		vbus_active = 1;
++		switch (tu->otg.state) {
++		case OTG_STATE_B_IDLE:
++			/* Enable the gadget driver */
++			if (tu->otg.gadget)
++				usb_gadget_vbus_connect(tu->otg.gadget);
++			/* Set B-session valid and not B-sessio ended to indicate
++			 * Vbus to be ok. */
++			l = omap_readl(OTG_CTRL);
++			l &= ~OTG_BSESSEND;
++			l |= OTG_BSESSVLD;
++			omap_writel(l, OTG_CTRL);
++
++			tu->otg.state = OTG_STATE_B_PERIPHERAL;
++			break;
++		case OTG_STATE_A_IDLE:
++			/* Session is now valid assuming the USB hub is driving Vbus */
++			tu->otg.state = OTG_STATE_A_HOST;
++			host_resume(tu);
++			break;
++		default:
++			break;
++		}
++		printk("USB cable connected\n");
++	} else {
++		switch (tu->otg.state) {
++		case OTG_STATE_B_PERIPHERAL:
++			if (tu->otg.gadget)
++				usb_gadget_vbus_disconnect(tu->otg.gadget);
++			tu->otg.state = OTG_STATE_B_IDLE;
++			break;
++		case OTG_STATE_A_HOST:
++			tu->otg.state = OTG_STATE_A_IDLE;
++			break;
++		default:
++			break;
++		}
++		printk("USB cable disconnected\n");
++		vbus_active = 0;
++	}
++
++	prev_state = tu->vbus_state;
++	tu->vbus_state = reg & 0x01;
++	if (prev_state != tu->vbus_state)
++		sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
++}
++
++static void tahvo_usb_become_host(struct tahvo_usb *tu)
++{
++	u32 l;
++
++	/* Clear system and transceiver controlled bits
++	 * also mark the A-session is always valid */
++	tahvo_otg_init();
++
++	l = omap_readl(OTG_CTRL);
++	l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK);
++	l |= OTG_ASESSVLD;
++	omap_writel(l, OTG_CTRL);
++
++	/* Power up the transceiver in USB host mode */
++	tahvo_write_reg(TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
++			USBR_MASTER_SW2 | USBR_MASTER_SW1);
++	tu->otg.state = OTG_STATE_A_IDLE;
++
++	check_vbus_state(tu);
++}
++
++static void tahvo_usb_stop_host(struct tahvo_usb *tu)
++{
++	host_suspend(tu);
++	tu->otg.state = OTG_STATE_A_IDLE;
++}
++
++static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
++{
++	u32 l;
++
++	/* Clear system and transceiver controlled bits
++	 * and enable ID to mark peripheral mode and
++	 * BSESSEND to mark no Vbus */
++	tahvo_otg_init();
++	l = omap_readl(OTG_CTRL);
++	l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
++	l |= OTG_ID | OTG_BSESSEND;
++	omap_writel(l, OTG_CTRL);
++
++	/* Power up transceiver and set it in USB perhiperal mode */
++	tahvo_write_reg(TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | USBR_NSUSPEND | USBR_SLAVE_SW);
++	tu->otg.state = OTG_STATE_B_IDLE;
++
++	check_vbus_state(tu);
++}
++
++static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
++{
++	u32 l;
++
++	l = omap_readl(OTG_CTRL);
++	l &= ~OTG_BSESSVLD;
++	l |= OTG_BSESSEND;
++	omap_writel(l, OTG_CTRL);
++
++	if (tu->otg.gadget)
++		usb_gadget_vbus_disconnect(tu->otg.gadget);
++	tu->otg.state = OTG_STATE_B_IDLE;
++
++}
++
++static void tahvo_usb_power_off(struct tahvo_usb *tu)
++{
++	u32 l;
++	int id;
++
++	/* Disable gadget controller if any */
++	if (tu->otg.gadget)
++		usb_gadget_vbus_disconnect(tu->otg.gadget);
++
++	host_suspend(tu);
++
++	/* Disable OTG and interrupts */
++	if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
++		id = OTG_ID;
++	else
++		id = 0;
++	l = omap_readl(OTG_CTRL);
++	l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
++	l |= id | OTG_BSESSEND;
++	omap_writel(l, OTG_CTRL);
++	omap_writew(0, OTG_IRQ_EN);
++
++	l = omap_readl(OTG_SYSCON_2);
++	l &= ~OTG_EN;
++	omap_writel(l, OTG_SYSCON_2);
++
++	l = omap_readl(OTG_SYSCON_1);
++	l |= OTG_IDLE_EN;
++	omap_writel(l, OTG_SYSCON_1);
++
++	/* Power off transceiver */
++	tahvo_write_reg(TAHVO_REG_USBR, 0);
++	tu->otg.state = OTG_STATE_UNDEFINED;
++}
++
++
++static int tahvo_usb_set_power(struct otg_transceiver *dev, unsigned mA)
++{
++	struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
++
++	dev_dbg(&tu->pt_dev->dev, "set_power %d mA\n", mA);
++
++	if (dev->state == OTG_STATE_B_PERIPHERAL) {
++		/* REVISIT: Can Tahvo charge battery from VBUS? */
++	}
++	return 0;
++}
++
++static int tahvo_usb_set_suspend(struct otg_transceiver *dev, int suspend)
++{
++	struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
++	u16 w;
++
++	dev_dbg(&tu->pt_dev->dev, "set_suspend\n");
++
++	w = tahvo_read_reg(TAHVO_REG_USBR);
++	if (suspend)
++		w &= ~USBR_NSUSPEND;
++	else
++		w |= USBR_NSUSPEND;
++	tahvo_write_reg(TAHVO_REG_USBR, w);
++
++	return 0;
++}
++
++static int tahvo_usb_start_srp(struct otg_transceiver *dev)
++{
++	struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
++	u32 otg_ctrl;
++
++	dev_dbg(&tu->pt_dev->dev, "start_srp\n");
++
++	if (!dev || tu->otg.state != OTG_STATE_B_IDLE)
++		return -ENODEV;
++
++	otg_ctrl = omap_readl(OTG_CTRL);
++	if (!(otg_ctrl & OTG_BSESSEND))
++		return -EINVAL;
++
++	otg_ctrl |= OTG_B_BUSREQ;
++	otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_SYS_MASK;
++	omap_writel(otg_ctrl, OTG_CTRL);
++	tu->otg.state = OTG_STATE_B_SRP_INIT;
++
++	return 0;
++}
++
++static int tahvo_usb_start_hnp(struct otg_transceiver *otg)
++{
++	struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
++
++	dev_dbg(&tu->pt_dev->dev, "start_hnp\n");
++#ifdef CONFIG_USB_OTG
++	/* REVISIT: Add this for OTG */
++#endif
++	return -EINVAL;
++}
++
++static int tahvo_usb_set_host(struct otg_transceiver *otg, struct usb_bus *host)
++{
++	struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
++	u32 l;
++
++	dev_dbg(&tu->pt_dev->dev, "set_host %p\n", host);
++
++	if (otg == NULL)
++		return -ENODEV;
++
++#if defined(CONFIG_USB_OTG) || !defined(CONFIG_USB_GADGET_OMAP)
++
++	mutex_lock(&tu->serialize);
++
++	if (host == NULL) {
++		if (TAHVO_MODE(tu) == TAHVO_MODE_HOST)
++			tahvo_usb_power_off(tu);
++		tu->otg.host = NULL;
++		mutex_unlock(&tu->serialize);
++		return 0;
++	}
++
++	l = omap_readl(OTG_SYSCON_1);
++	l &= ~(OTG_IDLE_EN | HST_IDLE_EN | DEV_IDLE_EN);
++	omap_writel(l, OTG_SYSCON_1);
++
++	if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) {
++		tu->otg.host = NULL;
++		tahvo_usb_become_host(tu);
++	} else
++		host_suspend(tu);
++
++	tu->otg.host = host;
++
++	mutex_unlock(&tu->serialize);
++#else
++	/* No host mode configured, so do not allow host controlled to be set */
++	return -EINVAL;
++#endif
++
++	return 0;
++}
++
++static int tahvo_usb_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
++{
++	struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
++
++	dev_dbg(&tu->pt_dev->dev, "set_peripheral %p\n", gadget);
++
++	if (!otg)
++		return -ENODEV;
++
++#if defined(CONFIG_USB_OTG) || defined(CONFIG_USB_GADGET_OMAP)
++
++	mutex_lock(&tu->serialize);
++
++	if (!gadget) {
++		if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
++			tahvo_usb_power_off(tu);
++		tu->otg.gadget = NULL;
++		mutex_unlock(&tu->serialize);
++		return 0;
++	}
++
++	tu->otg.gadget = gadget;
++	if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
++		tahvo_usb_become_peripheral(tu);
++
++	mutex_unlock(&tu->serialize);
++#else
++	/* No gadget mode configured, so do not allow host controlled to be set */
++	return -EINVAL;
++#endif
++
++	return 0;
++}
++
++static void tahvo_usb_irq_work(struct work_struct *work)
++{
++	struct tahvo_usb *tu = container_of(work, struct tahvo_usb, irq_work);
++
++	mutex_lock(&tu->serialize);
++	check_vbus_state(tu);
++	mutex_unlock(&tu->serialize);
++}
++
++static void tahvo_usb_vbus_interrupt(unsigned long arg)
++{
++	struct tahvo_usb *tu = (struct tahvo_usb *) arg;
++
++	tahvo_ack_irq(TAHVO_INT_VBUSON);
++	/* Seems we need this to acknowledge the interrupt */
++	tahvo_read_reg(TAHVO_REG_IDSR);
++	schedule_work(&tu->irq_work);
++}
++
++#ifdef CONFIG_USB_OTG
++static ssize_t otg_mode_show(struct device *device,
++			     struct device_attribute *attr, char *buf)
++{
++	struct tahvo_usb *tu = dev_get_drvdata(device);
++	switch (tu->tahvo_mode) {
++	case TAHVO_MODE_HOST:
++		return sprintf(buf, "host\n");
++	case TAHVO_MODE_PERIPHERAL:
++		return sprintf(buf, "peripheral\n");
++	}
++	return sprintf(buf, "unknown\n");
++}
++
++static ssize_t otg_mode_store(struct device *device,
++			      struct device_attribute *attr,
++			      const char *buf, size_t count)
++{
++	struct tahvo_usb *tu = dev_get_drvdata(device);
++	int r;
++
++	r = strlen(buf);
++	mutex_lock(&tu->serialize);
++	if (strncmp(buf, "host", 4) == 0) {
++		if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
++			tahvo_usb_stop_peripheral(tu);
++		tu->tahvo_mode = TAHVO_MODE_HOST;
++		if (tu->otg.host) {
++			printk(KERN_INFO "Selected HOST mode: host controller present.\n");
++			tahvo_usb_become_host(tu);
++		} else {
++			printk(KERN_INFO "Selected HOST mode: no host controller, powering off.\n");
++			tahvo_usb_power_off(tu);
++		}
++	} else if (strncmp(buf, "peripheral", 10) == 0) {
++		if (tu->tahvo_mode == TAHVO_MODE_HOST)
++			tahvo_usb_stop_host(tu);
++		tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
++		if (tu->otg.gadget) {
++			printk(KERN_INFO "Selected PERIPHERAL mode: gadget driver present.\n");
++			tahvo_usb_become_peripheral(tu);
++		} else {
++			printk(KERN_INFO "Selected PERIPHERAL mode: no gadget driver, powering off.\n");
++			tahvo_usb_power_off(tu);
++		}
++	} else
++		r = -EINVAL;
++
++	mutex_unlock(&tu->serialize);
++	return r;
++}
++
++static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store);
++#endif
++
++static int __init tahvo_usb_probe(struct platform_device *pdev)
++{
++	struct tahvo_usb *tu;
++	struct device *dev = &pdev->dev;
++	int ret;
++
++	ret = tahvo_get_status();
++	if (!ret)
++		return -ENODEV;
++
++	dev_dbg(dev, "probe\n");
++
++	/* Create driver data */
++	tu = kzalloc(sizeof(*tu), GFP_KERNEL);
++	if (!tu)
++		return -ENOMEM;
++
++	tu->pt_dev = container_of(dev, struct platform_device, dev);
++#ifdef CONFIG_USB_OTG
++	/* Default mode */
++#ifdef CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT
++	tu->tahvo_mode = TAHVO_MODE_HOST;
++#else
++	tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
++#endif
++#endif
++
++	INIT_WORK(&tu->irq_work, tahvo_usb_irq_work);
++	mutex_init(&tu->serialize);
++
++	/* Set initial state, so that we generate kevents only on
++	 * state changes */
++	tu->vbus_state = tahvo_read_reg(TAHVO_REG_IDSR) & 0x01;
++
++	/* We cannot enable interrupt until omap_udc is initialized */
++	ret = tahvo_request_irq(TAHVO_INT_VBUSON, tahvo_usb_vbus_interrupt,
++				(unsigned long) tu, "vbus_interrupt");
++	if (ret != 0) {
++		kfree(tu);
++		printk(KERN_ERR "Could not register Tahvo interrupt for VBUS\n");
++		return ret;
++	}
++
++	/* Attributes */
++	ret = device_create_file(dev, &dev_attr_vbus_state);
++#ifdef CONFIG_USB_OTG
++	ret |= device_create_file(dev, &dev_attr_otg_mode);
++#endif
++	if (ret)
++		printk(KERN_ERR "attribute creation failed: %d\n", ret);
++
++	/* Create OTG interface */
++	tahvo_usb_power_off(tu);
++	tu->otg.state = OTG_STATE_UNDEFINED;
++	tu->otg.label = DRIVER_NAME;
++	tu->otg.set_host = tahvo_usb_set_host;
++	tu->otg.set_peripheral = tahvo_usb_set_peripheral;
++	tu->otg.set_power = tahvo_usb_set_power;
++	tu->otg.set_suspend = tahvo_usb_set_suspend;
++	tu->otg.start_srp = tahvo_usb_start_srp;
++	tu->otg.start_hnp = tahvo_usb_start_hnp;
++
++	ret = otg_set_transceiver(&tu->otg);
++	if (ret < 0) {
++		printk(KERN_ERR "Cannot register USB transceiver\n");
++		kfree(tu);
++		tahvo_free_irq(TAHVO_INT_VBUSON);
++		return ret;
++	}
++
++	dev_set_drvdata(dev, tu);
++
++	/* Act upon current vbus state once at startup. A vbus state irq may or
++	 * may not be generated in addition to this. */
++	schedule_work(&tu->irq_work);
++	return 0;
++}
++
++static int __exit tahvo_usb_remove(struct platform_device *pdev)
++{
++	dev_dbg(&pdev->dev, "remove\n");
++
++	tahvo_free_irq(TAHVO_INT_VBUSON);
++	flush_scheduled_work();
++	otg_set_transceiver(0);
++	device_remove_file(&pdev->dev, &dev_attr_vbus_state);
++#ifdef CONFIG_USB_OTG
++	device_remove_file(&pdev->dev, &dev_attr_otg_mode);
++#endif
++	return 0;
++}
++
++static struct platform_driver tahvo_usb_driver = {
++	.driver		= {
++		.name	= "tahvo-usb",
++	},
++	.remove		= __exit_p(tahvo_usb_remove),
++};
++
++static int __init tahvo_usb_init(void)
++{
++	int ret = 0;
++
++	ret = platform_driver_probe(&tahvo_usb_driver, tahvo_usb_probe);
++	if (ret)
++		return ret;
++
++	ret = platform_driver_probe(&omap_otg_driver, omap_otg_probe);
++	if (ret) {
++		platform_driver_unregister(&tahvo_usb_driver);
++		return ret;
++	}
++
++	return 0;
++}
++
++subsys_initcall(tahvo_usb_init);
++
++static void __exit tahvo_usb_exit(void)
++{
++	platform_driver_unregister(&omap_otg_driver);
++	platform_driver_unregister(&tahvo_usb_driver);
++}
++module_exit(tahvo_usb_exit);
++
++MODULE_DESCRIPTION("Tahvo USB OTG Transceiver Driver");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs");
+Index: linux-2.6.38-rc6/drivers/Makefile
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/Makefile	2011-02-24 12:03:07.439316519 +0100
++++ linux-2.6.38-rc6/drivers/Makefile	2011-02-24 12:03:27.457522207 +0100
+@@ -74,7 +74,7 @@
+ obj-$(CONFIG_INPUT)		+= input/
+ obj-$(CONFIG_I2O)		+= message/
+ obj-$(CONFIG_RTC_LIB)		+= rtc/
+-obj-y				+= i2c/ media/
++obj-y				+= i2c/ media/ cbus/
+ obj-$(CONFIG_PPS)		+= pps/
+ obj-$(CONFIG_W1)		+= w1/
+ obj-$(CONFIG_POWER_SUPPLY)	+= power/
+Index: linux-2.6.38-rc6/arch/arm/Kconfig
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/Kconfig	2011-02-24 12:03:07.286322589 +0100
++++ linux-2.6.38-rc6/arch/arm/Kconfig	2011-02-24 12:03:27.458522167 +0100
+@@ -1930,6 +1930,10 @@
+ 
+ source "drivers/Kconfig"
+ 
++if ARCH_OMAP
++source "drivers/cbus/Kconfig"
++endif
++
+ source "fs/Kconfig"
+ 
+ source "arch/arm/Kconfig.debug"
diff --git a/target/linux/omap24xx/patches-2.6.38/505-retu-write-lock.patch b/target/linux/omap24xx/patches-2.6.38/505-retu-write-lock.patch
new file mode 100644
index 0000000000..0fb8c6f212
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/505-retu-write-lock.patch
@@ -0,0 +1,14 @@
+Index: linux-2.6.38-rc6/drivers/cbus/retu.c
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/cbus/retu.c	2011-02-26 23:23:34.014429906 +0100
++++ linux-2.6.38-rc6/drivers/cbus/retu.c	2011-02-26 23:25:18.905358127 +0100
+@@ -120,7 +120,9 @@
+ {
+ 	struct retu		*retu = dev_get_drvdata(child->parent);
+ 
++	mutex_lock(&retu->mutex);
+ 	__retu_write_reg(retu, reg, val);
++	mutex_unlock(&retu->mutex);
+ }
+ EXPORT_SYMBOL_GPL(retu_write_reg);
+ 
diff --git a/target/linux/omap24xx/patches-2.6.38/510-cbus-retu-defines.patch b/target/linux/omap24xx/patches-2.6.38/510-cbus-retu-defines.patch
new file mode 100644
index 0000000000..c4acce9eac
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/510-cbus-retu-defines.patch
@@ -0,0 +1,37 @@
+Index: linux-2.6.38-rc6/drivers/cbus/retu.h
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/cbus/retu.h	2011-02-25 02:16:28.000000000 +0100
++++ linux-2.6.38-rc6/drivers/cbus/retu.h	2011-02-25 23:36:10.363457910 +0100
+@@ -40,6 +40,8 @@
+ #define RETU_REG_CTRL_CLR	0x0f	/* Regulator clear register */
+ #define RETU_REG_CTRL_SET	0x10	/* Regulator set register */
+ #define RETU_REG_STATUS		0x16	/* Status register */
++#define  RETU_REG_STATUS_BATAVAIL	0x0100 /* Battery available */
++#define  RETU_REG_STATUS_CHGPLUG	0x1000 /* Charger is plugged in */
+ #define RETU_REG_WATCHDOG	0x17	/* Watchdog register */
+ #define RETU_REG_AUDTXR		0x18	/* Audio Codec Tx register */
+ #define RETU_REG_MAX		0x1f
+@@ -57,6 +59,23 @@
+ 
+ #define	MAX_RETU_IRQ_HANDLERS	16
+ 
++/* ADC channels */
++#define RETU_ADC_GND		0x00 /* Ground */
++#define RETU_ADC_BSI		0x01 /* Battery Size Indicator */
++#define RETU_ADC_BATTEMP	0x02 /* Battery temperature */
++#define RETU_ADC_CHGVOLT	0x03 /* Charger voltage */
++#define RETU_ADC_HEADSET	0x04 /* Headset detection */
++#define RETU_ADC_HOOKDET	0x05 /* Hook detection */
++#define RETU_ADC_RFGP		0x06 /* RF GP */
++#define RETU_ADC_WBTX		0x07 /* Wideband Tx detection */
++#define RETU_ADC_BATTVOLT	0x08 /* Battery voltage measurement */
++#define RETU_ADC_GND2		0x09 /* Ground */
++#define RETU_ADC_LIGHTSENS	0x0A /* Light sensor */
++#define RETU_ADC_LIGHTTEMP	0x0B /* Light sensor temperature */
++#define RETU_ADC_BKUPVOLT	0x0C /* Backup battery voltage */
++#define RETU_ADC_TEMP		0x0D /* RETU temperature */
++
++
+ int retu_read_reg(struct device *child, unsigned reg);
+ void retu_write_reg(struct device *child, unsigned reg, u16 val);
+ void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
diff --git a/target/linux/omap24xx/patches-2.6.38/520-cbus-tahvo-defines.patch b/target/linux/omap24xx/patches-2.6.38/520-cbus-tahvo-defines.patch
new file mode 100644
index 0000000000..ca109261fa
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/520-cbus-tahvo-defines.patch
@@ -0,0 +1,28 @@
+Index: linux-2.6.38-rc6/drivers/cbus/tahvo.h
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/cbus/tahvo.h	2011-02-25 02:16:28.000000000 +0100
++++ linux-2.6.38-rc6/drivers/cbus/tahvo.h	2011-02-25 23:41:00.321263098 +0100
+@@ -30,12 +30,23 @@
+ #define TAHVO_REG_IDR		0x01	/* Interrupt ID */
+ #define TAHVO_REG_IDSR		0x02	/* Interrupt status */
+ #define TAHVO_REG_IMR		0x03	/* Interrupt mask */
++#define TAHVO_REG_CHGCURR	0x04	/* Charge current control PWM (8-bit) */
+ #define TAHVO_REG_LEDPWMR	0x05	/* LED PWM */
+ #define TAHVO_REG_USBR		0x06	/* USB control */
++#define TAHVO_REG_CHGCTL	0x08	/* Charge control register */
++#define  TAHVO_REG_CHGCTL_EN		0x0001	/* Global charge enable */
++#define  TAHVO_REG_CHGCTL_PWMOVR	0x0004	/* PWM override. Force charge PWM to 0%/100% duty cycle. */
++#define  TAHVO_REG_CHGCTL_PWMOVRZERO	0x0008	/* If set, PWM override is 0% (If unset -> 100%) */
++#define  TAHVO_REG_CHGCTL_CURMEAS	0x0040	/* Enable battery current measurement. */
++#define  TAHVO_REG_CHGCTL_CURTIMRST	0x0080	/* Current measure timer reset. */
++#define TAHVO_REG_BATCURRTIMER	0x0c	/* Battery current measure timer (8-bit) */
++#define TAHVO_REG_BATCURR	0x0d	/* Battery (dis)charge current (signed 16-bit) */
++
+ #define TAHVO_REG_MAX		0x0d
+ 
+ /* Interrupt sources */
+ #define TAHVO_INT_VBUSON	0
++#define TAHVO_INT_BATCURR	7 /* Battery current measure timer */
+ 
+ #define MAX_TAHVO_IRQ_HANDLERS	8
+ 
diff --git a/target/linux/omap24xx/patches-2.6.38/600-tsc2005.patch b/target/linux/omap24xx/patches-2.6.38/600-tsc2005.patch
new file mode 100644
index 0000000000..b491cfa7d6
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/600-tsc2005.patch
@@ -0,0 +1,1039 @@
+---
+ drivers/input/touchscreen/Kconfig   |   11 
+ drivers/input/touchscreen/Makefile  |    1 
+ drivers/input/touchscreen/tsc2005.c |  958 ++++++++++++++++++++++++++++++++++++
+ include/linux/spi/tsc2005.h         |   30 +
+ 4 files changed, 1000 insertions(+)
+
+Index: linux-2.6.38-rc6/drivers/input/touchscreen/Kconfig
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/input/touchscreen/Kconfig	2011-02-22 02:25:52.000000000 +0100
++++ linux-2.6.38-rc6/drivers/input/touchscreen/Kconfig	2011-02-24 00:23:46.456893349 +0100
+@@ -629,6 +629,17 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called touchit213.
+ 
++config TOUCHSCREEN_TSC2005
++        tristate "TSC2005 based touchscreens"
++        depends on SPI_MASTER
++        help
++          Say Y here if you have a TSC2005 based touchscreen.
++
++	  If unsure, say N.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called tsc2005.
++
+ config TOUCHSCREEN_TSC2007
+ 	tristate "TSC2007 based touchscreens"
+ 	depends on I2C
+Index: linux-2.6.38-rc6/drivers/input/touchscreen/Makefile
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/input/touchscreen/Makefile	2011-02-22 02:25:52.000000000 +0100
++++ linux-2.6.38-rc6/drivers/input/touchscreen/Makefile	2011-02-24 00:23:46.457893305 +0100
+@@ -45,6 +45,7 @@
+ obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
+ obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
+ obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
++obj-$(CONFIG_TOUCHSCREEN_TSC2005)	+= tsc2005.o
+ obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
+ obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
+ obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
+Index: linux-2.6.38-rc6/drivers/input/touchscreen/tsc2005.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/input/touchscreen/tsc2005.c	2011-02-24 00:23:46.459893217 +0100
+@@ -0,0 +1,958 @@
++/*
++ * TSC2005 touchscreen driver
++ *
++ * Copyright (C) 2006-2008 Nokia Corporation
++ *
++ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
++ * based on TSC2301 driver by Klaus K. Pedersen <klaus.k.pedersen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/input.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/spi/spi.h>
++
++#include <linux/spi/tsc2005.h>
++
++/**
++ * The touchscreen interface operates as follows:
++ *
++ * Initialize:
++ *    Request access to GPIO103 (DAV)
++ *    tsc2005_ts_irq_handler will trigger when DAV line goes down
++ *
++ *  1) Pen is pressed against touchscreeen
++ *  2) TSC2005 performs AD conversion
++ *  3) After the conversion is done TSC2005 drives DAV line down
++ *  4) GPIO IRQ is received and tsc2005_ts_irq_handler is called
++ *  5) tsc2005_ts_irq_handler queues up an spi transfer to fetch
++ *     the x, y, z1, z2 values
++ *  6) tsc2005_ts_rx() reports coordinates to input layer and
++ *     sets up tsc2005_ts_timer() to be called after TSC2005_TS_SCAN_TIME
++ *  7)  When the penup_timer expires, there have not been DAV interrupts
++ *     during the last 20ms which means the pen has been lifted.
++ */
++
++#define TSC2005_VDD_LOWER_27
++
++#ifdef TSC2005_VDD_LOWER_27
++#define TSC2005_HZ     (10000000)
++#else
++#define TSC2005_HZ     (25000000)
++#endif
++
++#define TSC2005_CMD	(0x80)
++#define TSC2005_REG	(0x00)
++
++#define TSC2005_CMD_STOP	(1)
++#define TSC2005_CMD_10BIT	(0 << 2)
++#define TSC2005_CMD_12BIT	(1 << 2)
++
++#define TSC2005_CMD_SCAN_XYZZ	(0 << 3)
++#define TSC2005_CMD_SCAN_XY	(1 << 3)
++#define TSC2005_CMD_SCAN_X	(2 << 3)
++#define TSC2005_CMD_SCAN_Y	(3 << 3)
++#define TSC2005_CMD_SCAN_ZZ	(4 << 3)
++#define TSC2005_CMD_AUX_SINGLE	(5 << 3)
++#define TSC2005_CMD_TEMP1	(6 << 3)
++#define TSC2005_CMD_TEMP2	(7 << 3)
++#define TSC2005_CMD_AUX_CONT	(8 << 3)
++#define TSC2005_CMD_TEST_X_CONN	(9 << 3)
++#define TSC2005_CMD_TEST_Y_CONN	(10 << 3)
++#define TSC2005_CMD_TEST_SHORT	(11 << 3)
++/* command 12 reserved, according to 2008-03 erratum */
++#define TSC2005_CMD_DRIVE_XX	(13 << 3)
++#define TSC2005_CMD_DRIVE_YY	(14 << 3)
++#define TSC2005_CMD_DRIVE_YX	(15 << 3)
++
++#define TSC2005_REG_X		(0 << 3)
++#define TSC2005_REG_Y		(1 << 3)
++#define TSC2005_REG_Z1		(2 << 3)
++#define TSC2005_REG_Z2		(3 << 3)
++#define TSC2005_REG_AUX		(4 << 3)
++#define TSC2005_REG_TEMP1	(5 << 3)
++#define TSC2005_REG_TEMP2	(6 << 3)
++#define TSC2005_REG_STATUS	(7 << 3)
++#define TSC2005_REG_AUX_HIGH	(8 << 3)
++#define TSC2005_REG_AUX_LOW	(9 << 3)
++#define TSC2005_REG_TEMP_HIGH	(10 << 3)
++#define TSC2005_REG_TEMP_LOW	(11 << 3)
++#define TSC2005_REG_CFR0	(12 << 3)
++#define TSC2005_REG_CFR1	(13 << 3)
++#define TSC2005_REG_CFR2	(14 << 3)
++#define TSC2005_REG_FUNCTION	(15 << 3)
++
++#define TSC2005_REG_PND0	(1 << 1)
++#define TSC2005_REG_READ	(0x01)
++#define TSC2005_REG_WRITE	(0x00)
++
++
++#define TSC2005_CFR0_LONGSAMPLING	(1)
++#define TSC2005_CFR0_DETECTINWAIT	(1 << 1)
++#define TSC2005_CFR0_SENSETIME_32US	(0)
++#define TSC2005_CFR0_SENSETIME_96US	(1 << 2)
++#define TSC2005_CFR0_SENSETIME_544US	(1 << 3)
++#define TSC2005_CFR0_SENSETIME_2080US	(1 << 4)
++#define TSC2005_CFR0_SENSETIME_2656US	(0x001C)
++#define TSC2005_CFR0_PRECHARGE_20US	(0x0000)
++#define TSC2005_CFR0_PRECHARGE_84US	(0x0020)
++#define TSC2005_CFR0_PRECHARGE_276US	(0x0040)
++#define TSC2005_CFR0_PRECHARGE_1044US	(0x0080)
++#define TSC2005_CFR0_PRECHARGE_1364US	(0x00E0)
++#define TSC2005_CFR0_STABTIME_0US	(0x0000)
++#define TSC2005_CFR0_STABTIME_100US	(0x0100)
++#define TSC2005_CFR0_STABTIME_500US	(0x0200)
++#define TSC2005_CFR0_STABTIME_1MS	(0x0300)
++#define TSC2005_CFR0_STABTIME_5MS	(0x0400)
++#define TSC2005_CFR0_STABTIME_100MS	(0x0700)
++#define TSC2005_CFR0_CLOCK_4MHZ		(0x0000)
++#define TSC2005_CFR0_CLOCK_2MHZ		(0x0800)
++#define TSC2005_CFR0_CLOCK_1MHZ		(0x1000)
++#define TSC2005_CFR0_RESOLUTION12	(0x2000)
++#define TSC2005_CFR0_STATUS		(0x4000)
++#define TSC2005_CFR0_PENMODE		(0x8000)
++
++#define TSC2005_CFR0_INITVALUE	(TSC2005_CFR0_STABTIME_1MS  |	\
++				 TSC2005_CFR0_CLOCK_1MHZ    |	\
++				 TSC2005_CFR0_RESOLUTION12  |	\
++				 TSC2005_CFR0_PRECHARGE_276US | \
++				 TSC2005_CFR0_PENMODE)
++
++/* Bits common to both read and write of config register 0 */
++#define	TSC2005_CFR0_RW_MASK	0x3fff
++
++#define TSC2005_CFR1_BATCHDELAY_0MS	(0x0000)
++#define TSC2005_CFR1_BATCHDELAY_1MS	(0x0001)
++#define TSC2005_CFR1_BATCHDELAY_2MS	(0x0002)
++#define TSC2005_CFR1_BATCHDELAY_4MS	(0x0003)
++#define TSC2005_CFR1_BATCHDELAY_10MS	(0x0004)
++#define TSC2005_CFR1_BATCHDELAY_20MS	(0x0005)
++#define TSC2005_CFR1_BATCHDELAY_40MS	(0x0006)
++#define TSC2005_CFR1_BATCHDELAY_100MS	(0x0007)
++
++#define TSC2005_CFR1_INITVALUE	(TSC2005_CFR1_BATCHDELAY_4MS)
++
++#define TSC2005_CFR2_MAVE_TEMP	(0x0001)
++#define TSC2005_CFR2_MAVE_AUX	(0x0002)
++#define TSC2005_CFR2_MAVE_Z	(0x0004)
++#define TSC2005_CFR2_MAVE_Y	(0x0008)
++#define TSC2005_CFR2_MAVE_X	(0x0010)
++#define TSC2005_CFR2_AVG_1	(0x0000)
++#define TSC2005_CFR2_AVG_3	(0x0400)
++#define TSC2005_CFR2_AVG_7	(0x0800)
++#define TSC2005_CFR2_MEDIUM_1	(0x0000)
++#define TSC2005_CFR2_MEDIUM_3	(0x1000)
++#define TSC2005_CFR2_MEDIUM_7	(0x2000)
++#define TSC2005_CFR2_MEDIUM_15	(0x3000)
++
++#define TSC2005_CFR2_IRQ_MASK   (0xC000)
++#define TSC2005_CFR2_IRQ_DAV	(0x4000)
++#define TSC2005_CFR2_IRQ_PEN	(0x8000)
++#define TSC2005_CFR2_IRQ_PENDAV	(0x0000)
++
++#define TSC2005_CFR2_INITVALUE	(TSC2005_CFR2_IRQ_PENDAV |	\
++				 TSC2005_CFR2_MAVE_X    |	\
++				 TSC2005_CFR2_MAVE_Y    |	\
++				 TSC2005_CFR2_MAVE_Z    |	\
++				 TSC2005_CFR2_MEDIUM_15 |	\
++				 TSC2005_CFR2_AVG_7)
++
++#define MAX_12BIT					((1 << 12) - 1)
++#define TS_SAMPLES					4
++#define TSC2005_TS_PENUP_TIME				40
++
++static const u32 tsc2005_read_reg[] = {
++	(TSC2005_REG | TSC2005_REG_X | TSC2005_REG_READ) << 16,
++	(TSC2005_REG | TSC2005_REG_Y | TSC2005_REG_READ) << 16,
++	(TSC2005_REG | TSC2005_REG_Z1 | TSC2005_REG_READ) << 16,
++	(TSC2005_REG | TSC2005_REG_Z2 | TSC2005_REG_READ) << 16,
++};
++#define NUM_READ_REGS	(sizeof(tsc2005_read_reg)/sizeof(tsc2005_read_reg[0]))
++
++struct tsc2005 {
++	struct spi_device	*spi;
++
++	struct input_dev	*idev;
++	char			phys[32];
++	struct timer_list	penup_timer;
++
++	/* ESD recovery via a hardware reset if the tsc2005
++	 * doesn't respond after a configurable period (in ms) of
++	 * IRQ/SPI inactivity. If esd_timeout is 0, timer and work
++	 * fields are used.
++	 */
++	u32			esd_timeout;
++	struct timer_list	esd_timer;
++	struct work_struct	esd_work;
++
++	spinlock_t		lock;
++	struct mutex		mutex;
++
++	struct spi_message	read_msg;
++	struct spi_transfer	read_xfer[NUM_READ_REGS];
++	u32                     data[NUM_READ_REGS];
++
++	/* previously reported x,y,p (if pen_down) */
++	int			out_x;
++	int			out_y;
++	int			out_p;
++	/* fudge parameters - changes must exceed one of these. */
++	int			fudge_x;
++	int			fudge_y;
++	int			fudge_p;
++	/* raw copy of previous x,y,z */
++	int			in_x;
++	int			in_y;
++	int			in_z1;
++	int			in_z2;
++	/* average accumulators for each component */
++	int			sample_cnt;
++	int			avg_x;
++	int			avg_y;
++	int			avg_z1;
++	int			avg_z2;
++	/* configuration */
++	int			x_plate_ohm;
++	int			hw_avg_max;
++	int			stab_time;
++	int			p_max;
++	int			touch_pressure;
++	/* status */
++	u8			sample_sent;
++	u8			pen_down;
++	u8			disabled;
++	u8			disable_depth;
++	u8			spi_pending;
++
++	void (*set_reset)(bool enable);
++};
++
++static void tsc2005_cmd(struct tsc2005 *ts, u8 cmd)
++{
++	u8 data = TSC2005_CMD | TSC2005_CMD_12BIT | cmd;
++	struct spi_message msg;
++	struct spi_transfer xfer = { 0 };
++
++	xfer.tx_buf = &data;
++	xfer.rx_buf = NULL;
++	xfer.len = 1;
++	xfer.bits_per_word = 8;
++
++	spi_message_init(&msg);
++	spi_message_add_tail(&xfer, &msg);
++	spi_sync(ts->spi, &msg);
++}
++
++static void tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value)
++{
++	u32 tx;
++	struct spi_message msg;
++	struct spi_transfer xfer = { 0 };
++
++	tx = (TSC2005_REG | reg | TSC2005_REG_PND0 |
++	       TSC2005_REG_WRITE) << 16;
++	tx |= value;
++
++	xfer.tx_buf = &tx;
++	xfer.rx_buf = NULL;
++	xfer.len = 4;
++	xfer.bits_per_word = 24;
++
++	spi_message_init(&msg);
++	spi_message_add_tail(&xfer, &msg);
++	spi_sync(ts->spi, &msg);
++}
++
++static void tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value)
++{
++	u32 tx;
++	u32 rx = 0;
++	struct spi_message msg;
++	struct spi_transfer xfer = { 0 };
++
++	tx = (TSC2005_REG | reg | TSC2005_REG_READ) << 16;
++
++	xfer.tx_buf = &tx;
++	xfer.rx_buf = &rx;
++	xfer.len = 4;
++	xfer.bits_per_word = 24;
++
++	spi_message_init(&msg);
++	spi_message_add_tail(&xfer, &msg);
++	spi_sync(ts->spi, &msg);
++	*value = rx;
++}
++
++static void tsc2005_ts_update_pen_state(struct tsc2005 *ts,
++					int x, int y, int pressure)
++{
++	if (pressure) {
++		input_report_abs(ts->idev, ABS_X, x);
++		input_report_abs(ts->idev, ABS_Y, y);
++		input_report_abs(ts->idev, ABS_PRESSURE, pressure);
++		if (!ts->pen_down) {
++			input_report_key(ts->idev, BTN_TOUCH, 1);
++			ts->pen_down = 1;
++		}
++	} else {
++		input_report_abs(ts->idev, ABS_PRESSURE, 0);
++		if (ts->pen_down) {
++			input_report_key(ts->idev, BTN_TOUCH, 0);
++			ts->pen_down = 0;
++		}
++	}
++
++	input_sync(ts->idev);
++}
++
++/*
++ * This function is called by the SPI framework after the coordinates
++ * have been read from TSC2005
++ */
++static void tsc2005_ts_rx(void *arg)
++{
++	struct tsc2005 *ts = arg;
++	unsigned long flags;
++	int inside_rect, pressure_limit;
++	int x, y, z1, z2, pressure;
++
++	spin_lock_irqsave(&ts->lock, flags);
++
++	if (ts->disable_depth) {
++		ts->spi_pending = 0;
++		goto out;
++	}
++
++	x = ts->data[0];
++	y = ts->data[1];
++	z1 = ts->data[2];
++	z2 = ts->data[3];
++
++	/* validate pressure and position */
++	if (x > MAX_12BIT || y > MAX_12BIT)
++		goto out;
++
++	/* skip coords if the pressure-components are out of range */
++	if (z1 < 100 || z2 > MAX_12BIT || z1 >= z2)
++		goto out;
++
++	/* skip point if this is a pen down with the exact same values as
++	 * the value before pen-up - that implies SPI fed us stale data
++	 */
++	if (!ts->pen_down &&
++	    ts->in_x == x &&
++	    ts->in_y == y &&
++	    ts->in_z1 == z1 &&
++	    ts->in_z2 == z2)
++		goto out;
++
++	/* At this point we are happy we have a valid and useful reading.
++	 * Remember it for later comparisons. We may now begin downsampling
++	 */
++	ts->in_x = x;
++	ts->in_y = y;
++	ts->in_z1 = z1;
++	ts->in_z2 = z2;
++
++	/* don't run average on the "pen down" event */
++	if (ts->sample_sent) {
++		ts->avg_x += x;
++		ts->avg_y += y;
++		ts->avg_z1 += z1;
++		ts->avg_z2 += z2;
++
++		if (++ts->sample_cnt < TS_SAMPLES)
++			goto out;
++
++		x = ts->avg_x / TS_SAMPLES;
++		y = ts->avg_y / TS_SAMPLES;
++		z1 = ts->avg_z1 / TS_SAMPLES;
++		z2 = ts->avg_z2 / TS_SAMPLES;
++	}
++
++	ts->sample_cnt = 0;
++	ts->avg_x = 0;
++	ts->avg_y = 0;
++	ts->avg_z1 = 0;
++	ts->avg_z2 = 0;
++
++	pressure = x * (z2 - z1) / z1;
++	pressure = pressure * ts->x_plate_ohm / 4096;
++
++	pressure_limit = ts->sample_sent ? ts->p_max : ts->touch_pressure;
++	if (pressure > pressure_limit)
++		goto out;
++
++	/* Discard the event if it still is within the previous rect -
++	 * unless the pressure is clearly harder, but then use previous
++	 * x,y position. If any coordinate deviates enough, fudging
++	 * of all three will still take place in the input layer.
++	 */
++	inside_rect = (ts->sample_sent &&
++		x > (int)ts->out_x - ts->fudge_x &&
++		x < (int)ts->out_x + ts->fudge_x &&
++		y > (int)ts->out_y - ts->fudge_y &&
++		y < (int)ts->out_y + ts->fudge_y);
++	if (inside_rect)
++		x = ts->out_x, y = ts->out_y;
++
++	if (!inside_rect || pressure < (ts->out_p - ts->fudge_p)) {
++		tsc2005_ts_update_pen_state(ts, x, y, pressure);
++		ts->sample_sent = 1;
++		ts->out_x = x;
++		ts->out_y = y;
++		ts->out_p = pressure;
++	}
++out:
++	if (ts->spi_pending > 1) {
++		/* One or more interrupts (sometimes several dozens)
++		 * occured while waiting for the SPI read - get
++		 * another read going.
++		 */
++		ts->spi_pending = 1;
++		if (spi_async(ts->spi, &ts->read_msg)) {
++			dev_err(&ts->spi->dev, "ts: spi_async() failed");
++			ts->spi_pending = 0;
++		}
++	} else
++		ts->spi_pending = 0;
++
++	/* kick pen up timer - to make sure it expires again(!) */
++	if (ts->sample_sent) {
++		mod_timer(&ts->penup_timer,
++			  jiffies + msecs_to_jiffies(TSC2005_TS_PENUP_TIME));
++		/* Also kick the watchdog, as we still think we're alive */
++		if (ts->esd_timeout && ts->disable_depth == 0) {
++			unsigned long wdj = msecs_to_jiffies(ts->esd_timeout);
++			mod_timer(&ts->esd_timer, round_jiffies(jiffies+wdj));
++		}
++	}
++	spin_unlock_irqrestore(&ts->lock, flags);
++}
++
++/* This penup timer is very forgiving of delayed SPI reads. The
++ * (ESD) watchdog will rescue us if spi_pending remains set, unless
++ * we are enterring the disabled state. In that case we must just
++ * handle the pen up, and let disabling complete.
++ */
++static void tsc2005_ts_penup_timer_handler(unsigned long data)
++{
++	struct tsc2005 *ts = (struct tsc2005 *)data;
++	if ((!ts->spi_pending || ts->disable_depth) &&
++	    ts->sample_sent) {
++		tsc2005_ts_update_pen_state(ts, 0, 0, 0);
++		ts->sample_sent = 0;
++	}
++}
++
++/*
++ * This interrupt is called when pen is down and coordinates are
++ * available. That is indicated by a either:
++ * a) a rising edge on PINTDAV or (PENDAV mode)
++ * b) a falling edge on DAV line (DAV mode)
++ * depending on the setting of the IRQ bits in the CFR2 setting above.
++ */
++static irqreturn_t tsc2005_ts_irq_handler(int irq, void *dev_id)
++{
++	struct tsc2005 *ts = dev_id;
++	if (ts->disable_depth)
++		goto out;
++
++	if (!ts->spi_pending) {
++		if (spi_async(ts->spi, &ts->read_msg)) {
++			dev_err(&ts->spi->dev, "ts: spi_async() failed");
++			goto out;
++		}
++	}
++	/* By shifting in 1s we can never wrap */
++	ts->spi_pending = (ts->spi_pending<<1)+1;
++
++	/* Kick pen up timer only if it's not been started yet. Strictly,
++	 * it isn't even necessary to start it at all here,  but doing so
++	 * keeps an equivalence between pen state and timer state.
++	 * The SPI read loop will keep pushing it into the future.
++	 * If it times out with an SPI pending, it's ignored anyway.
++	 */
++	if (!timer_pending(&ts->penup_timer)) {
++		unsigned long pu = msecs_to_jiffies(TSC2005_TS_PENUP_TIME);
++		ts->penup_timer.expires = jiffies + pu;
++		add_timer(&ts->penup_timer);
++	}
++out:
++	return IRQ_HANDLED;
++}
++
++static void tsc2005_ts_setup_spi_xfer(struct tsc2005 *ts)
++{
++	struct spi_message *m = &ts->read_msg;
++	struct spi_transfer *x = &ts->read_xfer[0];
++	int i;
++
++	spi_message_init(m);
++
++	for (i = 0; i < NUM_READ_REGS; i++, x++) {
++		x->tx_buf = &tsc2005_read_reg[i];
++		x->rx_buf = &ts->data[i];
++		x->len = 4;
++		x->bits_per_word = 24;
++		x->cs_change = i < (NUM_READ_REGS - 1);
++		spi_message_add_tail(x, m);
++	}
++
++	m->complete = tsc2005_ts_rx;
++	m->context = ts;
++}
++
++static ssize_t tsc2005_ts_pen_down_show(struct device *dev,
++					struct device_attribute *attr,
++					char *buf)
++{
++	struct tsc2005 *ts = dev_get_drvdata(dev);
++
++	return sprintf(buf, "%u\n", ts->pen_down);
++}
++
++static DEVICE_ATTR(pen_down, S_IRUGO, tsc2005_ts_pen_down_show, NULL);
++
++static int tsc2005_configure(struct tsc2005 *ts, int flags)
++{
++	tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE);
++	tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE);
++	tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE);
++	tsc2005_cmd(ts, flags);
++
++	return 0;
++}
++
++static void tsc2005_start_scan(struct tsc2005 *ts)
++{
++	tsc2005_configure(ts, TSC2005_CMD_SCAN_XYZZ);
++}
++
++static void tsc2005_stop_scan(struct tsc2005 *ts)
++{
++	tsc2005_cmd(ts, TSC2005_CMD_STOP);
++}
++
++/* Must be called with mutex held */
++static void tsc2005_disable(struct tsc2005 *ts)
++{
++	if (ts->disable_depth++ != 0)
++		return;
++
++	disable_irq(ts->spi->irq);
++	if (ts->esd_timeout)
++		del_timer(&ts->esd_timer);
++
++	/* wait until penup timer expire normally */
++	do {
++		msleep(4);
++	} while (ts->sample_sent);
++
++	tsc2005_stop_scan(ts);
++}
++
++static void tsc2005_enable(struct tsc2005 *ts)
++{
++	if (ts->disable_depth != 1)
++		goto out;
++
++	if (ts->esd_timeout) {
++		unsigned long wdj = msecs_to_jiffies(ts->esd_timeout);
++		ts->esd_timer.expires = round_jiffies(jiffies+wdj);
++		add_timer(&ts->esd_timer);
++	}
++	tsc2005_start_scan(ts);
++	enable_irq(ts->spi->irq);
++out:
++	--ts->disable_depth;
++}
++
++static ssize_t tsc2005_disable_show(struct device *dev,
++				    struct device_attribute *attr, char *buf)
++{
++	struct tsc2005 *ts = dev_get_drvdata(dev);
++
++	return sprintf(buf, "%u\n", ts->disabled);
++}
++
++static ssize_t tsc2005_disable_store(struct device *dev,
++				     struct device_attribute *attr,
++				     const char *buf, size_t count)
++{
++	struct tsc2005		*ts = dev_get_drvdata(dev);
++	unsigned long res;
++	int i;
++
++	if (strict_strtoul(buf, 10, &res) < 0)
++		return -EINVAL;
++	i = res ? 1 : 0;
++
++	mutex_lock(&ts->mutex);
++	if (i == ts->disabled)
++		goto out;
++	ts->disabled = i;
++
++	if (i)
++		tsc2005_disable(ts);
++	else
++		tsc2005_enable(ts);
++out:
++	mutex_unlock(&ts->mutex);
++	return count;
++}
++
++static DEVICE_ATTR(disable_ts, 0664, tsc2005_disable_show,
++		   tsc2005_disable_store);
++
++static ssize_t tsc2005_ctrl_selftest_show(struct device *dev,
++					  struct device_attribute *attr,
++					  char *buf)
++{
++	u16 temp_high_orig, temp_high_test, temp_high;
++	unsigned int result = 1;
++	struct tsc2005 *ts = dev_get_drvdata(dev);
++
++	if (!ts->set_reset) {
++		dev_warn(&ts->spi->dev,
++			 "unable to selftest: reset not configured\n");
++		result = 0;
++		goto out;
++	}
++
++	mutex_lock(&ts->mutex);
++	tsc2005_disable(ts);
++
++	/* Test ctrl communications via temp high / low registers */
++	tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig);
++
++	temp_high_test = (temp_high_orig - 1) & 0x0FFF;
++
++	tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test);
++
++	tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
++
++	if (temp_high != temp_high_test) {
++		result = 0;
++		dev_warn(dev, "selftest failed: %d != %d\n",
++			 temp_high, temp_high_test);
++	}
++
++	/* HW Reset */
++	ts->set_reset(0);
++	msleep(1); /* only 10us required */
++	ts->set_reset(1);
++
++	tsc2005_enable(ts);
++
++	/* Test that reset really happened */
++	tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
++
++	if (temp_high != temp_high_orig) {
++		result = 0;
++		dev_warn(dev, "selftest failed after reset: "
++			 "%d != %d\n",
++			 temp_high, temp_high_orig);
++	}
++
++	mutex_unlock(&ts->mutex);
++
++out:
++	return sprintf(buf, "%u\n", result);
++}
++
++static DEVICE_ATTR(ts_ctrl_selftest, S_IRUGO, tsc2005_ctrl_selftest_show, NULL);
++
++static void tsc2005_esd_timer_handler(unsigned long data)
++{
++	struct tsc2005 *ts = (struct tsc2005 *)data;
++	if (!ts->disable_depth)
++		schedule_work(&ts->esd_work);
++}
++
++static void tsc2005_rst_handler(struct work_struct *work)
++{
++	u16 reg_val;
++	struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work);
++	unsigned long wdj;
++
++	mutex_lock(&ts->mutex);
++
++	/* If we are disabled, or the a touch has been detected,
++	 * then ignore this timeout. The enable will restart the
++	 * watchdog, as it restarts scanning
++	 */
++	if (ts->disable_depth)
++		goto out;
++
++	/* If we cannot read our known value from configuration register 0
++	 * then reset the controller as if from power-up and start
++	 * scanning again. Always re-arm the watchdog.
++	 */
++	tsc2005_read(ts, TSC2005_REG_CFR0, &reg_val);
++	if ((reg_val ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK) {
++		dev_info(&ts->spi->dev, "TSC not responding, resetting.\n");
++		/* If this timer kicked in, the penup timer, if ever active
++		 * at all, must have expired ages ago, so no need to del it.
++		 */
++		ts->set_reset(0);
++		if (ts->sample_sent) {
++			tsc2005_ts_update_pen_state(ts, 0, 0, 0);
++			ts->sample_sent = 0;
++		}
++		ts->spi_pending = 0;
++		msleep(1); /* only 10us required */
++		ts->set_reset(1);
++		tsc2005_start_scan(ts);
++	}
++	wdj = msecs_to_jiffies(ts->esd_timeout);
++	mod_timer(&ts->esd_timer, round_jiffies(jiffies+wdj));
++
++out:
++	mutex_unlock(&ts->mutex);
++}
++
++static int __devinit tsc2005_ts_init(struct tsc2005 *ts,
++				     struct tsc2005_platform_data *pdata)
++{
++	struct input_dev *idev;
++	int r;
++	int x_max, y_max;
++
++	init_timer(&ts->penup_timer);
++	setup_timer(&ts->penup_timer, tsc2005_ts_penup_timer_handler,
++			(unsigned long)ts);
++
++	spin_lock_init(&ts->lock);
++	mutex_init(&ts->mutex);
++
++	ts->x_plate_ohm		= pdata->ts_x_plate_ohm ? : 280;
++	ts->hw_avg_max		= pdata->ts_hw_avg;
++	ts->stab_time		= pdata->ts_stab_time;
++	x_max			= pdata->ts_x_max ? : 4096;
++	ts->fudge_x		= pdata->ts_x_fudge ? : 4;
++	y_max			= pdata->ts_y_max ? : 4096;
++	ts->fudge_y		= pdata->ts_y_fudge ? : 8;
++	ts->p_max		= pdata->ts_pressure_max ? : MAX_12BIT;
++	ts->touch_pressure	= pdata->ts_touch_pressure ? : ts->p_max;
++	ts->fudge_p		= pdata->ts_pressure_fudge ? : 2;
++
++	ts->set_reset		= pdata->set_reset;
++
++	idev = input_allocate_device();
++	if (idev == NULL) {
++		r = -ENOMEM;
++		goto err1;
++	}
++
++	idev->name = "TSC2005 touchscreen";
++	snprintf(ts->phys, sizeof(ts->phys), "%s/input-ts",
++		 dev_name(&ts->spi->dev));
++	idev->phys = ts->phys;
++
++	idev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
++	idev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
++	idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
++	ts->idev = idev;
++
++	tsc2005_ts_setup_spi_xfer(ts);
++
++	input_set_abs_params(idev, ABS_X, 0, x_max, ts->fudge_x, 0);
++	input_set_abs_params(idev, ABS_Y, 0, y_max, ts->fudge_y, 0);
++	input_set_abs_params(idev, ABS_PRESSURE, 0, ts->p_max, ts->fudge_p, 0);
++
++	tsc2005_start_scan(ts);
++
++	r = request_irq(ts->spi->irq, tsc2005_ts_irq_handler,
++			(((TSC2005_CFR2_INITVALUE & TSC2005_CFR2_IRQ_MASK) ==
++			  TSC2005_CFR2_IRQ_PENDAV)
++			 ? IRQF_TRIGGER_RISING
++			 : IRQF_TRIGGER_FALLING) |
++			IRQF_DISABLED, "tsc2005", ts);
++	if (r < 0) {
++		dev_err(&ts->spi->dev, "unable to get DAV IRQ");
++		goto err2;
++	}
++
++	set_irq_wake(ts->spi->irq, 1);
++
++	r = input_register_device(idev);
++	if (r < 0) {
++		dev_err(&ts->spi->dev, "can't register touchscreen device\n");
++		goto err3;
++	}
++
++	/* We can tolerate these failing */
++	r = device_create_file(&ts->spi->dev, &dev_attr_ts_ctrl_selftest);
++	if (r < 0)
++		dev_warn(&ts->spi->dev, "can't create sysfs file for %s: %d\n",
++			 dev_attr_ts_ctrl_selftest.attr.name, r);
++
++	r = device_create_file(&ts->spi->dev, &dev_attr_pen_down);
++	if (r < 0)
++		dev_warn(&ts->spi->dev, "can't create sysfs file for %s: %d\n",
++			 dev_attr_pen_down.attr.name, r);
++
++	r = device_create_file(&ts->spi->dev, &dev_attr_disable_ts);
++	if (r < 0)
++		dev_warn(&ts->spi->dev, "can't create sysfs file for %s: %d\n",
++			 dev_attr_disable_ts.attr.name, r);
++
++	/* Finally, configure and start the optional EDD watchdog. */
++	ts->esd_timeout = pdata->esd_timeout;
++	if (ts->esd_timeout && ts->set_reset) {
++		unsigned long wdj;
++		setup_timer(&ts->esd_timer, tsc2005_esd_timer_handler,
++			    (unsigned long)ts);
++		INIT_WORK(&ts->esd_work, tsc2005_rst_handler);
++		wdj = msecs_to_jiffies(ts->esd_timeout);
++		ts->esd_timer.expires = round_jiffies(jiffies+wdj);
++		add_timer(&ts->esd_timer);
++	}
++
++	return 0;
++err3:
++	free_irq(ts->spi->irq, ts);
++err2:
++	tsc2005_stop_scan(ts);
++	input_free_device(idev);
++err1:
++	return r;
++}
++
++static int __devinit tsc2005_probe(struct spi_device *spi)
++{
++	struct tsc2005			*ts;
++	struct tsc2005_platform_data	*pdata = spi->dev.platform_data;
++	int r;
++
++	if (spi->irq < 0) {
++		dev_dbg(&spi->dev, "no irq?\n");
++		return -ENODEV;
++	}
++	if (!pdata) {
++		dev_dbg(&spi->dev, "no platform data?\n");
++		return -ENODEV;
++	}
++
++	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
++	if (ts == NULL)
++		return -ENOMEM;
++
++	dev_set_drvdata(&spi->dev, ts);
++	ts->spi = spi;
++	spi->dev.power.power_state = PMSG_ON;
++
++	spi->mode = SPI_MODE_0;
++	spi->bits_per_word = 8;
++	/* The max speed might've been defined by the board-specific
++	 * struct */
++	if (!spi->max_speed_hz)
++		spi->max_speed_hz = TSC2005_HZ;
++
++	spi_setup(spi);
++
++	r = tsc2005_ts_init(ts, pdata);
++	if (r)
++		goto err1;
++
++	return 0;
++
++err1:
++	kfree(ts);
++	return r;
++}
++
++static int __devexit tsc2005_remove(struct spi_device *spi)
++{
++	struct tsc2005 *ts = dev_get_drvdata(&spi->dev);
++
++	mutex_lock(&ts->mutex);
++	tsc2005_disable(ts);
++	mutex_unlock(&ts->mutex);
++
++	device_remove_file(&ts->spi->dev, &dev_attr_disable_ts);
++	device_remove_file(&ts->spi->dev, &dev_attr_pen_down);
++	device_remove_file(&ts->spi->dev, &dev_attr_ts_ctrl_selftest);
++
++	free_irq(ts->spi->irq, ts);
++	input_unregister_device(ts->idev);
++
++	if (ts->esd_timeout)
++		del_timer(&ts->esd_timer);
++	kfree(ts);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int tsc2005_suspend(struct spi_device *spi, pm_message_t mesg)
++{
++	struct tsc2005 *ts = dev_get_drvdata(&spi->dev);
++
++	mutex_lock(&ts->mutex);
++	tsc2005_disable(ts);
++	mutex_unlock(&ts->mutex);
++
++	return 0;
++}
++
++static int tsc2005_resume(struct spi_device *spi)
++{
++	struct tsc2005 *ts = dev_get_drvdata(&spi->dev);
++
++	mutex_lock(&ts->mutex);
++	tsc2005_enable(ts);
++	mutex_unlock(&ts->mutex);
++
++	return 0;
++}
++#endif
++
++static struct spi_driver tsc2005_driver = {
++	.driver = {
++		.name = "tsc2005",
++		.owner = THIS_MODULE,
++	},
++#ifdef CONFIG_PM
++	.suspend = tsc2005_suspend,
++	.resume = tsc2005_resume,
++#endif
++	.probe = tsc2005_probe,
++	.remove = __devexit_p(tsc2005_remove),
++};
++
++static int __init tsc2005_init(void)
++{
++	printk(KERN_INFO "TSC2005 driver initializing\n");
++
++	return spi_register_driver(&tsc2005_driver);
++}
++module_init(tsc2005_init);
++
++static void __exit tsc2005_exit(void)
++{
++	spi_unregister_driver(&tsc2005_driver);
++}
++module_exit(tsc2005_exit);
++
++MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:tsc2005");
+Index: linux-2.6.38-rc6/include/linux/spi/tsc2005.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/include/linux/spi/tsc2005.h	2011-02-24 00:23:46.459893217 +0100
+@@ -0,0 +1,30 @@
++#ifndef _LINUX_SPI_TSC2005_H
++#define _LINUX_SPI_TSC2005_H
++
++#include <linux/types.h>
++
++struct tsc2005_platform_data {
++	u16	ts_x_plate_ohm;
++	u32	ts_stab_time;	/* voltage settling time */
++	u8	ts_hw_avg;	/* HW assiseted averaging. Can be
++				   0, 4, 8, 16 samples per reading */
++	u32	ts_touch_pressure;	/* Pressure limit until we report a
++					   touch event. After that we switch
++					   to ts_max_pressure. */
++	u32	ts_pressure_max;/* Samples with bigger pressure value will
++				   be ignored, since the corresponding X, Y
++				   values are unreliable */
++	u32	ts_pressure_fudge;
++	u32	ts_x_max;
++	u32	ts_x_fudge;
++	u32	ts_y_max;
++	u32	ts_y_fudge;
++
++	u32	esd_timeout;    /* msec of inactivity before we check */
++
++	unsigned ts_ignore_last:1;
++
++	void (*set_reset)(bool enable);
++};
++
++#endif
diff --git a/target/linux/omap24xx/patches-2.6.38/710-evdev-events-without-grab.patch b/target/linux/omap24xx/patches-2.6.38/710-evdev-events-without-grab.patch
new file mode 100644
index 0000000000..c483eab2a0
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/710-evdev-events-without-grab.patch
@@ -0,0 +1,33 @@
+---
+ drivers/input/evdev.c |   10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+Index: linux-2.6.38-rc6/drivers/input/evdev.c
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/input/evdev.c	2011-02-22 02:25:52.000000000 +0100
++++ linux-2.6.38-rc6/drivers/input/evdev.c	2011-02-24 00:23:52.155643164 +0100
+@@ -78,7 +78,7 @@
+ 			unsigned int type, unsigned int code, int value)
+ {
+ 	struct evdev *evdev = handle->private;
+-	struct evdev_client *client;
++	struct evdev_client *client, *c;
+ 	struct input_event event;
+ 
+ 	do_gettimeofday(&event.time);
+@@ -89,9 +89,13 @@
+ 	rcu_read_lock();
+ 
+ 	client = rcu_dereference(evdev->grab);
+-	if (client)
++	if (client) {
+ 		evdev_pass_event(client, &event);
+-	else
++		/* Also pass events to clients that did not grab the device. */
++		list_for_each_entry_rcu(c, &evdev->client_list, node)
++			if (c != client)
++				evdev_pass_event(c, &event);
++	} else
+ 		list_for_each_entry_rcu(client, &evdev->client_list, node)
+ 			evdev_pass_event(client, &event);
+ 
diff --git a/target/linux/omap24xx/patches-2.6.38/810-mmc-fixes.patch b/target/linux/omap24xx/patches-2.6.38/810-mmc-fixes.patch
new file mode 100644
index 0000000000..3142855409
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/810-mmc-fixes.patch
@@ -0,0 +1,70 @@
+---
+ drivers/mmc/core/core.c  |    5 +++--
+ drivers/mmc/host/omap.c  |    7 +++++--
+ include/linux/mmc/host.h |    2 ++
+ 3 files changed, 10 insertions(+), 4 deletions(-)
+
+Index: linux-2.6.38-rc6/drivers/mmc/host/omap.c
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/mmc/host/omap.c	2011-02-22 02:25:52.000000000 +0100
++++ linux-2.6.38-rc6/drivers/mmc/host/omap.c	2011-02-24 00:40:46.129908862 +0100
+@@ -389,7 +389,7 @@
+ 
+ 	mod_timer(&host->cmd_abort_timer, jiffies + HZ/2);
+ 
+-	OMAP_MMC_WRITE(host, CTO, 200);
++//	OMAP_MMC_WRITE(host, CTO, 200);
+ 	OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
+ 	OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16);
+ 	OMAP_MMC_WRITE(host, IE,
+@@ -1456,6 +1456,7 @@
+ 	host->dma_ch = -1;
+ 
+ 	host->irq = irq;
++	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+ 	host->phys_base = host->mem_res->start;
+ 	host->virt_base = ioremap(res->start, res->end - res->start + 1);
+ 	if (!host->virt_base)
+@@ -1495,7 +1496,9 @@
+ 		}
+ 	}
+ 
+-	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
++	/* Make sure the detect workqueue was run at least once. */
++	printk(KERN_INFO "OMAP-mmc: waiting for cards...\n");
++	mmc_flush_scheduled_work();
+ 
+ 	return 0;
+ 
+Index: linux-2.6.38-rc6/drivers/mmc/core/core.c
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/mmc/core/core.c	2011-02-22 02:25:52.000000000 +0100
++++ linux-2.6.38-rc6/drivers/mmc/core/core.c	2011-02-24 00:40:46.131908784 +0100
+@@ -75,12 +75,13 @@
+ }
+ 
+ /*
+- * Internal function. Flush all scheduled work from the MMC work queue.
++ * Flush all scheduled work from the MMC work queue.
+  */
+-static void mmc_flush_scheduled_work(void)
++void mmc_flush_scheduled_work(void)
+ {
+ 	flush_workqueue(workqueue);
+ }
++EXPORT_SYMBOL(mmc_flush_scheduled_work);
+ 
+ /**
+  *	mmc_request_done - finish processing an MMC request
+Index: linux-2.6.38-rc6/include/linux/mmc/host.h
+===================================================================
+--- linux-2.6.38-rc6.orig/include/linux/mmc/host.h	2011-02-22 02:25:52.000000000 +0100
++++ linux-2.6.38-rc6/include/linux/mmc/host.h	2011-02-24 00:40:46.131908784 +0100
+@@ -326,5 +326,7 @@
+ 	return host->pm_flags & MMC_PM_KEEP_POWER;
+ }
+ 
++void mmc_flush_scheduled_work(void);
++
+ #endif
+ 
diff --git a/target/linux/omap24xx/patches-2.6.38/820-backlight-fixes.patch b/target/linux/omap24xx/patches-2.6.38/820-backlight-fixes.patch
new file mode 100644
index 0000000000..040d08b9f2
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/820-backlight-fixes.patch
@@ -0,0 +1,35 @@
+---
+ arch/arm/mach-omap2/board-n8x0-lcd.c |   18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+Index: linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0-lcd.c
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/mach-omap2/board-n8x0-lcd.c	2011-02-24 12:37:51.702386250 +0100
++++ linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0-lcd.c	2011-02-24 12:39:35.223028410 +0100
+@@ -34,8 +34,26 @@
+ 	}
+ }
+ 
++static int n8x0_get_backlight_level(struct mipid_platform_data *pdata)
++{
++	return tahvo_get_backlight_level();
++}
++
++static int n8x0_get_max_backlight_level(struct mipid_platform_data *pdata)
++{
++	return tahvo_get_max_backlight_level();
++}
++
++static void n8x0_set_backlight_level(struct mipid_platform_data *pdata, int level)
++{
++	tahvo_set_backlight_level(level);
++}
++
+ struct mipid_platform_data n8x0_mipid_platform_data = {
+ 	.shutdown = mipid_shutdown,
++	.get_bklight_level = n8x0_get_backlight_level,
++	.set_bklight_level = n8x0_set_backlight_level,
++	.get_bklight_max = n8x0_get_max_backlight_level,
+ };
+ 
+ void __init n8x0_mipid_init(void)
diff --git a/target/linux/omap24xx/patches-2.6.38/830-omap2-serial-fixes.patch b/target/linux/omap24xx/patches-2.6.38/830-omap2-serial-fixes.patch
new file mode 100644
index 0000000000..2a29a8e47f
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/830-omap2-serial-fixes.patch
@@ -0,0 +1,25 @@
+Index: linux-2.6.38-rc6/arch/arm/mach-omap2/serial.c
+===================================================================
+--- linux-2.6.38-rc6.orig/arch/arm/mach-omap2/serial.c	2011-02-22 02:25:52.000000000 +0100
++++ linux-2.6.38-rc6/arch/arm/mach-omap2/serial.c	2011-02-26 22:17:38.356027926 +0100
+@@ -655,6 +655,8 @@
+ }
+ #endif
+ 
++static struct omap_uart_state statebuf[4];
++
+ void __init omap_serial_early_init(void)
+ {
+ 	int i = 0;
+@@ -670,9 +672,9 @@
+ 		if (!oh)
+ 			break;
+ 
+-		uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
+-		if (WARN_ON(!uart))
++		if (WARN_ON(i >= ARRAY_SIZE(statebuf)))
+ 			return;
++		uart = &statebuf[i];
+ 
+ 		uart->oh = oh;
+ 		uart->num = i++;
diff --git a/target/linux/omap24xx/patches-2.6.38/900-n810-battery-management.patch b/target/linux/omap24xx/patches-2.6.38/900-n810-battery-management.patch
new file mode 100644
index 0000000000..30295f375e
--- /dev/null
+++ b/target/linux/omap24xx/patches-2.6.38/900-n810-battery-management.patch
@@ -0,0 +1,1948 @@
+Index: linux-2.6.38-rc6/drivers/cbus/Kconfig
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/cbus/Kconfig	2011-02-26 23:22:54.941732609 +0100
++++ linux-2.6.38-rc6/drivers/cbus/Kconfig	2011-02-26 23:25:39.886753420 +0100
+@@ -72,4 +72,12 @@
+ 	  to Retu/Vilma. Detection state and events are exposed through
+ 	  sysfs.
+ 
++config N810BM
++	depends on CBUS_RETU && CBUS_TAHVO
++	tristate "Nokia n810 battery management"
++	---help---
++	  Nokia n810 device battery management.
++
++	  If unsure, say N.
++
+ endmenu
+Index: linux-2.6.38-rc6/drivers/cbus/Makefile
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/cbus/Makefile	2011-02-26 23:22:54.927732361 +0100
++++ linux-2.6.38-rc6/drivers/cbus/Makefile	2011-02-26 23:25:39.886753420 +0100
+@@ -11,3 +11,6 @@
+ obj-$(CONFIG_CBUS_RETU_RTC)	+= retu-rtc.o
+ obj-$(CONFIG_CBUS_RETU_WDT)	+= retu-wdt.o
+ obj-$(CONFIG_CBUS_RETU_HEADSET)	+= retu-headset.o
++n810bm-y			+= n810bm_main.o
++n810bm-y			+= lipocharge.o
++obj-$(CONFIG_N810BM)		+= n810bm.o
+Index: linux-2.6.38-rc6/drivers/cbus/n810bm_main.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/n810bm_main.c	2011-02-26 23:25:39.889753477 +0100
+@@ -0,0 +1,1597 @@
++/*
++ *   Nokia n810 battery management
++ *
++ *   WARNING: This driver is based on unconfirmed documentation.
++ *            It is possibly dangerous to use this software.
++ *            Use this software at your own risk!
++ *
++ *   Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
++ *
++ *   This program is free software; you can redistribute it and/or
++ *   modify it under the terms of the GNU General Public License
++ *   as published by the Free Software Foundation; either version 2
++ *   of the License, or (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ */
++
++#define DEBUG
++
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/timer.h>
++#include <linux/firmware.h>
++#include <linux/bitops.h>
++#include <linux/workqueue.h>
++#include <linux/delay.h>
++
++#include "cbus.h"
++#include "retu.h"
++#include "tahvo.h"
++#include "lipocharge.h"
++
++
++#define N810BM_PMM_BLOCK_FILENAME	"n810-cal-bme-pmm.fw"
++#define N810BM_PMM_BLOCK_SIZE		0x600
++#define N810BM_PMM_GROUP_SIZE		0x200
++#define N810BM_PMM_ELEM_SIZE		0x10
++
++#define N810BM_CHECK_INTERVAL		(HZ * 2)
++#define N810BM_MIN_VOLTAGE_THRES	3200 /* Absolute minimum voltage threshold */
++
++
++/* RETU_ADC_BSI
++ * The battery size indicator ADC measures the resistance between
++ * the battery BSI pin and ground. This is used to detect the battery
++ * capacity, as the BSI resistor is related to capacity.
++ *
++ * Manually measured lookup table.
++ * Hard to measure, thus not very accurate.
++ *
++ * Resistance  |  ADC value
++ * ========================
++ * 120k        |  0x3AC
++ * 110k        |  0x37C
++ * 100k        |  0x351
++ *  90k        |  0x329
++ */
++
++/* RETU_ADC_BATTVOLT
++ * Manually measured lookup table.
++ * Hard to measure, thus not very accurate.
++ *
++ * Voltage  |  ADC value
++ * =====================
++ * 2.80V    |  0x037
++ * 2.90V    |  0x05E
++ * 3.00V    |  0x090
++ * 3.10V    |  0x0A4
++ * 3.20V    |  0x0CC
++ * 3.30V    |  0x0EF
++ * 3.40V    |  0x115
++ * 3.50V    |  0x136
++ * 3.60V    |  0x15C
++ * 3.70V    |  0x187
++ * 3.80V    |  0x1A5
++ * 3.90V    |  0x1C9
++ * 4.00V    |  0x1ED
++ * 4.10V    |  0x212
++ * 4.20V    |  0x236
++ */
++
++
++/* PMM block ADC IDs */
++enum n810bm_pmm_adc_id {
++	N810BM_PMM_ADC_BATVOLT		= 0x01,	/* Battery voltage */
++	N810BM_PMM_ADC_CHGVOLT		= 0x02,	/* Charger voltage */
++	N810BM_PMM_ADC_GND2		= 0x03,	/* Ground 0V */
++	N810BM_PMM_ADC_BSI		= 0x04,	/* Battery size indicator */
++	N810BM_PMM_ADC_BATTEMP		= 0x05,	/* Battery temperature */
++	N810BM_PMM_ADC_HEADSET		= 0x06,	/* Headset detection */
++	N810BM_PMM_ADC_HOOKDET		= 0x07,	/* Hook detection */
++	N810BM_PMM_ADC_LIGHTSENS	= 0x08,	/* Light sensor */
++	N810BM_PMM_ADC_BATCURR		= 0x0E,	/* Battery current */
++	N810BM_PMM_ADC_BKUPVOLT		= 0x13,	/* Backup battery voltage */
++	N810BM_PMM_ADC_LIGHTTEMP	= 0x14,	/* Light sensor temperature */
++	N810BM_PMM_ADC_RFGP		= 0x15,	/* RF GP */
++	N810BM_PMM_ADC_WBTX		= 0x16,	/* Wideband TX detection */
++	N810BM_PMM_ADC_RETUTEMP		= 0x17,	/* RETU chip temperature */
++	N810BM_PMM_ADC_0xFE		= 0xFE,
++};
++
++struct n810bm_adc_calib {
++	enum n810bm_pmm_adc_id id;
++	u8 flags;
++	u8 adc_groupnr;
++	u32 field1;
++	u32 field2;
++	u16 field3;
++	u16 field4;
++};
++
++struct n810bm_calib {
++	struct n810bm_adc_calib adc[25];
++};
++
++enum n810bm_capacity {
++	N810BM_CAP_UNKNOWN	= -1,
++	N810BM_CAP_NONE		= 0,
++	N810BM_CAP_1500MAH	= 1500,	/* 1500 mAh battery */
++};
++
++enum n810bm_notify_flags {
++	N810BM_NOTIFY_battery_charging,
++	N810BM_NOTIFY_charger_pwm,
++};
++
++struct n810bm {
++	bool battery_present;			/* A battery is inserted */
++	bool charger_present;			/* The charger is connected */
++	enum n810bm_capacity capacity;		/* The capacity of the inserted battery (if any) */
++
++	bool charger_enabled;			/* Want to charge? */
++	struct lipocharge charger;		/* Charger subsystem */
++	unsigned int active_current_pwm;	/* Active value of TAHVO_REG_CHGCURR */
++	int current_measure_enabled;		/* Current measure enable refcount */
++
++	struct platform_device *pdev;
++	struct n810bm_calib calib;		/* Calibration data */
++
++	bool verbose_charge_log;		/* Verbose charge logging */
++
++	unsigned long notify_flags;
++	struct work_struct notify_work;
++	struct work_struct currmeas_irq_work;
++	struct delayed_work periodic_check_work;
++
++	bool initialized;			/* The hardware was initialized */
++	struct mutex mutex;
++};
++
++static void n810bm_notify_battery_charging(struct n810bm *bm);
++static void n810bm_notify_charger_pwm(struct n810bm *bm);
++
++
++static struct platform_device *n810bm_retu_device;
++static struct platform_device *n810bm_tahvo_device;
++
++
++static inline struct n810bm * device_to_n810bm(struct device *dev)
++{
++	struct platform_device *pdev = to_platform_device(dev);
++	struct n810bm *bm = platform_get_drvdata(pdev);
++
++	return bm;
++}
++
++static inline bool n810bm_known_battery_present(struct n810bm *bm)
++{
++	return bm->battery_present &&
++	       bm->capacity != N810BM_CAP_UNKNOWN &&
++	       bm->capacity != N810BM_CAP_NONE;
++}
++
++static NORET_TYPE void n810bm_emergency(struct n810bm *bm, const char *message) ATTRIB_NORET;
++static void n810bm_emergency(struct n810bm *bm, const char *message)
++{
++	printk(KERN_EMERG "n810 battery management fatal fault: %s\n", message);
++	cbus_emergency();
++}
++
++static u16 tahvo_read(struct n810bm *bm, unsigned int reg)
++{
++	return tahvo_read_reg(reg);
++}
++
++static void tahvo_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
++{
++	tahvo_set_clear_reg_bits(reg, set, mask);
++}
++
++static inline void tahvo_write(struct n810bm *bm, unsigned int reg, u16 value)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&tahvo_lock, flags);
++	tahvo_write_reg(reg, value);
++	spin_unlock_irqrestore(&tahvo_lock, flags);
++}
++
++static inline void tahvo_set(struct n810bm *bm, unsigned int reg, u16 mask)
++{
++	tahvo_set_clear_reg_bits(reg, mask, mask);
++}
++
++static inline void tahvo_clear(struct n810bm *bm, unsigned int reg, u16 mask)
++{
++	tahvo_set_clear_reg_bits(reg, 0, mask);
++}
++
++static u16 retu_read(struct n810bm *bm, unsigned int reg)
++{
++	return retu_read_reg(&n810bm_retu_device->dev, reg);
++}
++
++static void retu_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
++{
++	retu_set_clear_reg_bits(&n810bm_retu_device->dev, reg, set, mask);
++}
++
++static inline void retu_write(struct n810bm *bm, unsigned int reg, u16 value)
++{
++	retu_write_reg(&n810bm_retu_device->dev, reg, value);
++}
++
++static int retu_adc_average(struct n810bm *bm, unsigned int chan,
++			    unsigned int nr_passes)
++{
++	unsigned int i, value = 0;
++	int ret;
++
++	if (WARN_ON(!nr_passes))
++		return 0;
++	for (i = 0; i < nr_passes; i++) {
++		ret = retu_read_adc(&n810bm_retu_device->dev, chan);
++		if (ret < 0)
++			return ret;
++		value += ret;
++	}
++	value /= nr_passes;
++
++	return value;
++}
++
++static struct n810bm_adc_calib * n810bm_get_adc_calib(struct n810bm *bm,
++						enum n810bm_pmm_adc_id id)
++{
++	unsigned int index = 0;
++	struct n810bm_adc_calib *cal;
++
++	if (id != N810BM_PMM_ADC_0xFE)
++		index = (unsigned int)id + 1;
++	if (index >= ARRAY_SIZE(bm->calib.adc))
++		return NULL;
++
++	cal = &bm->calib.adc[index];
++	WARN_ON(cal->id && cal->id != id);
++
++	return cal;
++}
++
++static int pmm_record_get(struct n810bm *bm,
++			  const struct firmware *pmm_block,
++			  void *buffer, size_t length,
++			  unsigned int group, unsigned int element, unsigned int offset)
++{
++	const u8 *pmm_area = pmm_block->data;
++	u8 active_group_mask;
++
++	if (pmm_block->size != N810BM_PMM_BLOCK_SIZE)
++		return -EINVAL;
++	if (group >= N810BM_PMM_BLOCK_SIZE / N810BM_PMM_GROUP_SIZE)
++		return -EINVAL;
++	if (element >= N810BM_PMM_GROUP_SIZE / N810BM_PMM_ELEM_SIZE)
++		return -EINVAL;
++	if (offset >= N810BM_PMM_ELEM_SIZE || length > N810BM_PMM_ELEM_SIZE ||
++	    length + offset > N810BM_PMM_ELEM_SIZE)
++		return -EINVAL;
++
++	active_group_mask = pmm_area[16];
++	if (!(active_group_mask & (1 << group))) {
++		dev_dbg(&bm->pdev->dev, "pwm_record_get: Requested group %u, "
++			"but group is not active", group);
++		return -ENOENT;
++	}
++
++	memcpy(buffer,
++	       pmm_area + group * N810BM_PMM_GROUP_SIZE
++			+ element * N810BM_PMM_ELEM_SIZE
++			+ offset,
++	       length);
++
++	return 0;
++}
++
++/* PMM block group 1 element */
++struct group1_element {
++	u8 id;
++	u8 flags;
++	u8 adc_groupnr;
++	u8 _padding;
++	__le32 field1;
++	__le32 field2;
++} __packed;
++
++static int extract_group1_elem(struct n810bm *bm,
++			       const struct firmware *pmm_block,
++			       const enum n810bm_pmm_adc_id *pmm_adc_ids, size_t nr_pmm_adc_ids,
++			       u32 field1_mask, u32 field2_mask)
++{
++	struct group1_element elem;
++	int err;
++	unsigned int i, element_nr;
++	struct n810bm_adc_calib *adc_calib;
++
++	for (i = 0; i < nr_pmm_adc_ids; i++) {
++		element_nr = (unsigned int)(pmm_adc_ids[i]) + 3;
++
++		err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
++				     1, element_nr, 0);
++		if (err)
++			continue;
++		adc_calib = n810bm_get_adc_calib(bm, elem.id);
++		if (!adc_calib) {
++			dev_err(&bm->pdev->dev, "extract_group1_elem: "
++				"Could not get calib element for 0x%02X",
++				elem.id);
++			return -EINVAL;
++		}
++
++		if (adc_calib->flags == elem.flags) {
++			adc_calib->field1 = le32_to_cpu(elem.field1) & field1_mask;
++			adc_calib->field2 = le32_to_cpu(elem.field2) & field2_mask;
++		} else {
++			dev_dbg(&bm->pdev->dev, "extract_group1_elem: "
++				"Not extracting fields due to flags mismatch: "
++				"0x%02X vs 0x%02X",
++				adc_calib->flags, elem.flags);
++		}
++	}
++
++	return 0;
++}
++
++static int n810bm_parse_pmm_group1(struct n810bm *bm,
++				   const struct firmware *pmm_block)
++{
++	struct n810bm_adc_calib *adc_calib;
++	struct group1_element elem;
++	int err;
++
++	static const enum n810bm_pmm_adc_id pmm_adc_ids_1[] = {
++		N810BM_PMM_ADC_BATVOLT,
++		N810BM_PMM_ADC_CHGVOLT,
++		N810BM_PMM_ADC_BKUPVOLT,
++		N810BM_PMM_ADC_BATCURR,
++	};
++	static const enum n810bm_pmm_adc_id pmm_adc_ids_2[] = {
++		N810BM_PMM_ADC_BSI,
++	};
++	static const enum n810bm_pmm_adc_id pmm_adc_ids_3[] = {
++		N810BM_PMM_ADC_BATTEMP,
++	};
++
++	/* Parse element 2 */
++	err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
++			     1, 2, 0);
++	if (err) {
++		dev_err(&bm->pdev->dev,
++			"PMM: Failed to get group 1 / element 2");
++		return err;
++	}
++	if (elem.id == N810BM_PMM_ADC_0xFE && elem.flags == 0x05) {
++		adc_calib = n810bm_get_adc_calib(bm, elem.id);
++		if (!adc_calib) {
++			dev_err(&bm->pdev->dev,
++				"calib extract: Failed to get 0xFE calib");
++			return -EINVAL;
++		}
++		adc_calib->id = elem.id;
++		adc_calib->flags = elem.flags;
++		adc_calib->field1 = le32_to_cpu(elem.field1);
++		adc_calib->field2 = le32_to_cpu(elem.field2);
++	}
++
++	err = extract_group1_elem(bm, pmm_block,
++				  pmm_adc_ids_1, ARRAY_SIZE(pmm_adc_ids_1),
++				  0xFFFFFFFF, 0xFFFFFFFF);
++	if (err)
++		return err;
++	err = extract_group1_elem(bm, pmm_block,
++				  pmm_adc_ids_2, ARRAY_SIZE(pmm_adc_ids_2),
++				  0xFFFFFFFF, 0);
++	if (err)
++		return err;
++	err = extract_group1_elem(bm, pmm_block,
++				  pmm_adc_ids_3, ARRAY_SIZE(pmm_adc_ids_3),
++				  0xFFFFFFFF, 0x0000FFFF);
++	if (err)
++		return err;
++
++	return 0;
++}
++
++static int n810bm_parse_pmm_group2(struct n810bm *bm,
++				   const struct firmware *pmm_block)
++{
++	dev_err(&bm->pdev->dev, "TODO: CAL BME PMM group 2 parser not implemented, yet");
++	return -EOPNOTSUPP;
++}
++
++static void n810bm_adc_calib_set_defaults(struct n810bm *bm)
++{
++	struct n810bm_adc_calib *adc_calib;
++	unsigned int i;
++
++	static const struct n810bm_adc_calib defaults[] = {
++		/* ADC group-nr 0 */
++		{
++			.id		= N810BM_PMM_ADC_HEADSET,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_HOOKDET,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_RFGP,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_LIGHTSENS,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_WBTX,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_RETUTEMP,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_GND2,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		},
++		/* ADC group-nr 1 */
++		{
++			.id		= N810BM_PMM_ADC_0xFE,
++			.flags		= 0x05,
++			.adc_groupnr	= 1,
++			.field1		= (u32)-2,
++			.field2		= 13189,
++		}, {
++			.id		= N810BM_PMM_ADC_BATVOLT,
++			.flags		= 0x01,
++			.adc_groupnr	= 1,
++			.field1		= 2527,
++			.field2		= 21373,
++		}, {
++			.id		= N810BM_PMM_ADC_CHGVOLT,
++			.flags		= 0x01,
++			.adc_groupnr	= 1,
++			.field1		= 0,
++			.field2		= 129848,
++		}, {
++			.id		= N810BM_PMM_ADC_BKUPVOLT,
++			.flags		= 0x01,
++			.adc_groupnr	= 1,
++			.field1		= 0,
++			.field2		= 20000,
++		}, {
++			.id		= N810BM_PMM_ADC_BATCURR,
++			.flags		= 0x06,
++			.adc_groupnr	= 1,
++			.field1		= 0,
++			.field2		= 9660,
++		},
++		/* ADC group-nr 2 */
++		{
++			.id		= N810BM_PMM_ADC_BSI,
++			.flags		= 0x02,
++			.adc_groupnr	= 2,
++			.field1		= 1169,
++			.field2		= 0,
++		},
++		/* ADC group-nr 3 */
++		{
++			.id		= N810BM_PMM_ADC_BATTEMP,
++			.flags		= 0x03,
++			.adc_groupnr	= 3,
++			.field1		= 265423000,
++			.field2		= 298,
++		},
++		/* ADC group-nr 4 */
++		{
++			.id		= N810BM_PMM_ADC_LIGHTTEMP,
++			.flags		= 0x04,
++			.adc_groupnr	= 4,
++			.field1		= 19533778,
++			.field2		= 308019670,
++			.field3		= 4700,
++			.field4		= 2500,
++		},
++	};
++
++	/* Clear the array */
++	memset(&bm->calib.adc, 0, sizeof(bm->calib.adc));
++	for (i = 0; i < ARRAY_SIZE(bm->calib.adc); i++)
++		bm->calib.adc[i].flags = 0xFF;
++
++	/* Copy the defaults */
++	for (i = 0; i < ARRAY_SIZE(defaults); i++) {
++		adc_calib = n810bm_get_adc_calib(bm, defaults[i].id);
++		if (WARN_ON(!adc_calib))
++			continue;
++		*adc_calib = defaults[i];
++	}
++}
++
++static int n810bm_parse_pmm_block(struct n810bm *bm,
++				  const struct firmware *pmm_block)
++{
++	u8 byte;
++	int err;
++	unsigned int i, count;
++	struct n810bm_adc_calib *adc_calib;
++
++	/* Initialize to defaults */
++	n810bm_adc_calib_set_defaults(bm);
++
++	/* Parse the PMM data */
++	err = pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
++			     1, 0, 0); /* group 1 / element 0 */
++	err |= (byte != 0x01);
++	err |= pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
++			      1, 1, 0); /* group 1 / element 1 */
++	err |= (byte != 0x01);
++	if (err)
++		err = n810bm_parse_pmm_group2(bm, pmm_block);
++	else
++		err = n810bm_parse_pmm_group1(bm, pmm_block);
++	if (err)
++		return err;
++
++	/* Sanity checks */
++	for (i = 0, count = 0; i < ARRAY_SIZE(bm->calib.adc); i++) {
++		adc_calib = &bm->calib.adc[i];
++		if (adc_calib->flags == 0xFF)
++			continue;
++		switch (adc_calib->id) {
++		case N810BM_PMM_ADC_BATVOLT:
++			if (adc_calib->field1 < 2400 ||
++			    adc_calib->field1 > 2700)
++				goto value_check_fail;
++			if (adc_calib->field2 < 20000 ||
++			    adc_calib->field2 > 23000)
++				goto value_check_fail;
++			count++;
++			break;
++		case N810BM_PMM_ADC_BSI:
++			if (adc_calib->field1 < 1100 ||
++			    adc_calib->field1 > 1300)
++				goto value_check_fail;
++			count++;
++			break;
++		case N810BM_PMM_ADC_BATCURR:
++			if (adc_calib->field2 < 7000 ||
++			    adc_calib->field2 > 12000)
++				goto value_check_fail;
++			count++;
++			break;
++		case N810BM_PMM_ADC_0xFE:
++			if ((s32)adc_calib->field1 > 14 ||
++			    (s32)adc_calib->field1 < -14)
++				goto value_check_fail;
++			if (adc_calib->field2 < 13000 ||
++			    adc_calib->field2 > 13350)
++				goto value_check_fail;
++			count++;
++			break;
++		case N810BM_PMM_ADC_CHGVOLT:
++		case N810BM_PMM_ADC_BATTEMP:
++		case N810BM_PMM_ADC_BKUPVOLT:
++			count++;
++			break;
++		case N810BM_PMM_ADC_GND2:
++		case N810BM_PMM_ADC_HOOKDET:
++		case N810BM_PMM_ADC_LIGHTSENS:
++		case N810BM_PMM_ADC_HEADSET:
++		case N810BM_PMM_ADC_LIGHTTEMP:
++		case N810BM_PMM_ADC_RFGP:
++		case N810BM_PMM_ADC_WBTX:
++		case N810BM_PMM_ADC_RETUTEMP:
++			break;
++		}
++		dev_dbg(&bm->pdev->dev,
++			"ADC 0x%02X calib: 0x%02X 0x%02X 0x%08X 0x%08X 0x%04X 0x%04X",
++			adc_calib->id, adc_calib->flags, adc_calib->adc_groupnr,
++			adc_calib->field1, adc_calib->field2,
++			adc_calib->field3, adc_calib->field4);
++	}
++	if (count != 7) {
++		dev_err(&bm->pdev->dev, "PMM sanity check: Did not find "
++			"all required values (count=%u)", count);
++		goto check_fail;
++	}
++
++	return 0;
++
++value_check_fail:
++	dev_err(&bm->pdev->dev, "PMM image sanity check failed "
++		"(id=%02X, field1=%08X, field2=%08X)",
++		adc_calib->id, adc_calib->field1, adc_calib->field2);
++check_fail:
++	return -EILSEQ;
++}
++
++/* Set the current measure timer that triggers on Tahvo IRQ 7
++ * An interval of zero disables the timer. */
++static void n810bm_set_current_measure_timer(struct n810bm *bm,
++					     u16 millisec_interval)
++{
++	u16 value = millisec_interval;
++
++	if (value <= 0xF905) {
++		value = ((u64)0x10624DD3 * (u64)(value + 0xF9)) >> 32;
++		value /= 16;
++	} else
++		value = 0xFF;
++
++	tahvo_write(bm, TAHVO_REG_BATCURRTIMER, value & 0xFF);
++
++	tahvo_set(bm, TAHVO_REG_CHGCTL,
++		  TAHVO_REG_CHGCTL_CURTIMRST);
++	tahvo_clear(bm, TAHVO_REG_CHGCTL,
++		    TAHVO_REG_CHGCTL_CURTIMRST);
++
++	if (millisec_interval)
++		tahvo_enable_irq(TAHVO_INT_BATCURR);
++	else
++		tahvo_disable_irq(TAHVO_INT_BATCURR);
++
++	//TODO also do a software timer for safety.
++}
++
++static void n810bm_enable_current_measure(struct n810bm *bm)
++{
++	WARN_ON(bm->current_measure_enabled < 0);
++	if (!bm->current_measure_enabled) {
++		/* Enable the current measurement circuitry */
++		tahvo_set(bm, TAHVO_REG_CHGCTL,
++			  TAHVO_REG_CHGCTL_CURMEAS);
++		dev_dbg(&bm->pdev->dev,
++			"Current measurement circuitry enabled");
++	}
++	bm->current_measure_enabled++;
++}
++
++static void n810bm_disable_current_measure(struct n810bm *bm)
++{
++	bm->current_measure_enabled--;
++	WARN_ON(bm->current_measure_enabled < 0);
++	if (!bm->current_measure_enabled) {
++		/* Disable the current measurement circuitry */
++		tahvo_clear(bm, TAHVO_REG_CHGCTL,
++			    TAHVO_REG_CHGCTL_CURMEAS);
++		dev_dbg(&bm->pdev->dev,
++			"Current measurement circuitry disabled");
++	}
++}
++
++/* Measure the actual battery current. Returns a signed value in mA.
++ * Does only work, if current measurement was enabled. */
++static int n810bm_measure_batt_current(struct n810bm *bm)
++{
++	u16 retval;
++	int adc = 0, ma, i;
++
++	if (WARN_ON(bm->current_measure_enabled <= 0))
++		return 0;
++	for (i = 0; i < 3; i++) {
++		retval = tahvo_read(bm, TAHVO_REG_BATCURR);
++		adc += (s16)retval; /* Value is signed */
++	}
++	adc /= 3;
++
++	//TODO convert to mA
++	ma = adc;
++
++	return ma;
++}
++
++/* Requires bm->mutex locked */
++static int n810bm_measure_batt_current_async(struct n810bm *bm)
++{
++	int ma;
++	bool charging = lipocharge_is_charging(&bm->charger);
++
++	n810bm_enable_current_measure(bm);
++	if (!charging)
++		WARN_ON(bm->active_current_pwm != 0);
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      (charging ? 0 : TAHVO_REG_CHGCTL_PWMOVRZERO));
++	ma = n810bm_measure_batt_current(bm);
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      (charging ? TAHVO_REG_CHGCTL_EN : 0));
++	n810bm_disable_current_measure(bm);
++
++	return ma;
++}
++
++static int adc_sanity_check(struct n810bm *bm, unsigned int channel)
++{
++	int value;
++
++	value = retu_read_adc(&n810bm_retu_device->dev, channel);
++	if (value < 0) {
++		dev_err(&bm->pdev->dev, "Failed to read GND ADC channel %u",
++			channel);
++		return -EIO;
++	}
++	dev_dbg(&bm->pdev->dev,
++		"GND ADC channel %u sanity check got value: %d",
++		channel, value);
++	if (value > 5) {
++		n810bm_emergency(bm, "GND ADC sanity check failed");
++		return -EIO;
++	}
++
++	return 0;
++}
++
++static int n810bm_check_adc_sanity(struct n810bm *bm)
++{
++	int err;
++
++	/* Discard one conversion */
++	retu_write(bm, RETU_REG_ADCSCR, 0);
++	retu_read_adc(&n810bm_retu_device->dev, RETU_ADC_GND2);
++
++	err = adc_sanity_check(bm, RETU_ADC_GND2);
++	if (err)
++		return err;
++
++	return 0;
++}
++
++/* Measure the battery voltage. Returns the value in mV (or negative value on error). */
++static int n810bm_measure_batt_voltage(struct n810bm *bm)
++{
++	int adc;
++	unsigned int mv;
++	const unsigned int scale = 1000;
++
++	adc = retu_adc_average(bm, RETU_ADC_BATTVOLT, 5);
++	if (adc < 0)
++		return adc;
++	if (adc <= 0x37)
++		return 2800;
++	mv = 2800 + ((adc - 0x37) * (((4200 - 2800) * scale) / (0x236 - 0x37))) / scale;
++
++	//TODO compensate for power consumption
++	//TODO honor calibration values
++
++	return mv;
++}
++
++/* Measure the charger voltage. Returns the value in mV (or negative value on error). */
++static int n810bm_measure_charger_voltage(struct n810bm *bm)
++{
++	int adc;
++	unsigned int mv;
++
++	adc = retu_adc_average(bm, RETU_ADC_CHGVOLT, 5);
++	if (adc < 0)
++		return adc;
++	//TODO convert to mV
++	mv = adc;
++
++	return mv;
++}
++
++/* Measure backup battery voltage. Returns the value in mV (or negative value on error). */
++static int n810bm_measure_backup_batt_voltage(struct n810bm *bm)
++{
++	int adc;
++	unsigned int mv;
++
++	adc = retu_adc_average(bm, RETU_ADC_BKUPVOLT, 3);
++	if (adc < 0)
++		return adc;
++	//TODO convert to mV
++	mv = adc;
++
++	return mv;
++}
++
++/* Measure the battery temperature. Returns the value in K (or negative value on error). */
++static int n810bm_measure_batt_temp(struct n810bm *bm)
++{
++	int adc;
++	unsigned int k;
++
++	adc = retu_adc_average(bm, RETU_ADC_BATTEMP, 3);
++	if (adc < 0)
++		return adc;
++	//TODO convert to K
++	k = adc;
++
++	return k;
++}
++
++/* Read the battery capacity via BSI pin. */
++static enum n810bm_capacity n810bm_read_batt_capacity(struct n810bm *bm)
++{
++	int adc;
++	const unsigned int hyst = 20;
++
++	adc = retu_adc_average(bm, RETU_ADC_BSI, 5);
++	if (adc < 0) {
++		dev_err(&bm->pdev->dev, "Failed to read BSI ADC");
++		return N810BM_CAP_UNKNOWN;
++	}
++
++	if (adc >= 0x3B5 - hyst && adc <= 0x3B5 + hyst)
++		return N810BM_CAP_1500MAH;
++
++	dev_err(&bm->pdev->dev, "Capacity indicator 0x%X unknown", adc);
++
++	return N810BM_CAP_UNKNOWN;
++}
++
++/* Convert a battery voltage (in mV) to percentage. */
++static unsigned int n810bm_mvolt2percent(unsigned int mv)
++{
++	const unsigned int minv = 3700;
++	const unsigned int maxv = 4150;
++	unsigned int percent;
++
++	mv = clamp(mv, minv, maxv);
++	percent = (mv - minv) * 100 / (maxv - minv);
++
++	return percent;
++}
++
++static void n810bm_start_charge(struct n810bm *bm)
++{
++	int err;
++
++	WARN_ON(!bm->battery_present);
++	WARN_ON(!bm->charger_present);
++
++	/* Set PWM to zero */
++	bm->active_current_pwm = 0;
++	tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
++
++	/* Charge global enable */
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      TAHVO_REG_CHGCTL_EN);
++
++	WARN_ON((int)bm->capacity <= 0);
++	bm->charger.capacity = bm->capacity;
++	err = lipocharge_start(&bm->charger);
++	WARN_ON(err);
++
++	/* Initialize current measurement circuitry */
++	n810bm_enable_current_measure(bm);
++	n810bm_set_current_measure_timer(bm, 250);
++
++	dev_info(&bm->pdev->dev, "Charging battery");
++	n810bm_notify_charger_pwm(bm);
++	n810bm_notify_battery_charging(bm);
++}
++
++static void n810bm_stop_charge(struct n810bm *bm)
++{
++	if (lipocharge_is_charging(&bm->charger)) {
++		n810bm_set_current_measure_timer(bm, 0);
++		n810bm_disable_current_measure(bm);
++	}
++	lipocharge_stop(&bm->charger);
++
++	/* Set PWM to zero */
++	bm->active_current_pwm = 0;
++	tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
++
++	/* Charge global disable */
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      0);
++
++	dev_info(&bm->pdev->dev, "Not charging battery");
++	n810bm_notify_charger_pwm(bm);
++	n810bm_notify_battery_charging(bm);
++}
++
++/* Periodic check */
++static void n810bm_periodic_check_work(struct work_struct *work)
++{
++	struct n810bm *bm = container_of(to_delayed_work(work),
++					 struct n810bm, periodic_check_work);
++	u16 status;
++	bool battery_was_present, charger_was_present;
++	int mv;
++
++	mutex_lock(&bm->mutex);
++
++	status = retu_read(bm, RETU_REG_STATUS);
++	battery_was_present = bm->battery_present;
++	charger_was_present = bm->charger_present;
++	bm->battery_present = !!(status & RETU_REG_STATUS_BATAVAIL);
++	bm->charger_present = !!(status & RETU_REG_STATUS_CHGPLUG);
++
++	if (bm->battery_present != battery_was_present) {
++		/* Battery state changed */
++		if (bm->battery_present) {
++			bm->capacity = n810bm_read_batt_capacity(bm);
++			if (bm->capacity == N810BM_CAP_UNKNOWN) {
++				dev_err(&bm->pdev->dev, "Unknown battery detected");
++			} else {
++				dev_info(&bm->pdev->dev, "Detected %u mAh battery",
++					 (unsigned int)bm->capacity);
++			}
++		} else {
++			bm->capacity = N810BM_CAP_NONE;
++			dev_info(&bm->pdev->dev, "The main battery was removed");
++			//TODO disable charging
++		}
++	}
++
++	if (bm->charger_present != charger_was_present) {
++		/* Charger state changed */
++		dev_info(&bm->pdev->dev, "The charger was %s",
++			 bm->charger_present ? "plugged in" : "removed");
++	}
++
++	if ((bm->battery_present && !bm->charger_present) ||
++	    !n810bm_known_battery_present(bm)){
++		/* We're draining the battery */
++		mv = n810bm_measure_batt_voltage(bm);
++		if (mv < 0) {
++			n810bm_emergency(bm,
++				"check: Failed to measure voltage");
++		}
++		if (mv < N810BM_MIN_VOLTAGE_THRES) {
++			n810bm_emergency(bm,
++				"check: Minimum voltage threshold reached");
++		}
++	}
++
++	if (bm->charger_present && n810bm_known_battery_present(bm)) {
++		/* Known battery and charger are connected */
++		if (bm->charger_enabled) {
++			/* Charger is enabled */
++			if (!lipocharge_is_charging(&bm->charger)) {
++				//TODO start charging, if battery is below some threshold
++				n810bm_start_charge(bm);
++			}
++		}
++	}
++
++	if (lipocharge_is_charging(&bm->charger) && !bm->charger_present) {
++		/* Charger was unplugged. */
++		n810bm_stop_charge(bm);
++	}
++
++	mutex_unlock(&bm->mutex);
++	schedule_delayed_work(&bm->periodic_check_work,
++			      round_jiffies_relative(N810BM_CHECK_INTERVAL));
++}
++
++/*XXX
++static void n810bm_adc_irq_handler(unsigned long data)
++{
++	struct n810bm *bm = (struct n810bm *)data;
++
++	retu_ack_irq(RETU_INT_ADCS);
++	//TODO
++dev_info(&bm->pdev->dev, "ADC interrupt triggered\n");
++}
++*/
++
++static void n810bm_tahvo_current_measure_work(struct work_struct *work)
++{
++	struct n810bm *bm = container_of(work, struct n810bm, currmeas_irq_work);
++	int res, ma, mv, temp;
++
++	mutex_lock(&bm->mutex);
++	if (!lipocharge_is_charging(&bm->charger))
++		goto out_unlock;
++
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      TAHVO_REG_CHGCTL_PWMOVR);
++	ma = n810bm_measure_batt_current(bm);
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO);
++	msleep(10);
++	mv = n810bm_measure_batt_voltage(bm);
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      0);
++	temp = n810bm_measure_batt_temp(bm);
++	if (WARN_ON(mv < 0))
++		goto out_unlock;
++	if (WARN_ON(temp < 0))
++		goto out_unlock;
++
++	if (bm->verbose_charge_log) {
++		dev_info(&bm->pdev->dev,
++			 "Battery charge state: %d mV, %d mA (%s)",
++			 mv, ma,
++			 (ma <= 0) ? "discharging" : "charging");
++	}
++	res = lipocharge_update_state(&bm->charger, mv, ma, temp);
++	if (res) {
++		if (res > 0)
++			dev_info(&bm->pdev->dev, "Battery fully charged");
++		n810bm_stop_charge(bm);
++	}
++out_unlock:
++	mutex_unlock(&bm->mutex);
++}
++
++static void n810bm_tahvo_current_measure_irq_handler(unsigned long data)
++{
++	struct n810bm *bm = (struct n810bm *)data;
++
++	tahvo_ack_irq(TAHVO_INT_BATCURR);
++	schedule_work(&bm->currmeas_irq_work);
++}
++
++#define DEFINE_ATTR_NOTIFY(attr_name)						\
++	void n810bm_notify_##attr_name(struct n810bm *bm)			\
++	{									\
++		set_bit(N810BM_NOTIFY_##attr_name, &bm->notify_flags);		\
++		wmb();								\
++		schedule_work(&bm->notify_work);				\
++	}
++
++#define DEFINE_SHOW_INT_FUNC(name, member)					\
++	static ssize_t n810bm_attr_##name##_show(struct device *dev,		\
++						 struct device_attribute *attr,	\
++						 char *buf)			\
++	{									\
++		struct n810bm *bm = device_to_n810bm(dev);			\
++		ssize_t count;							\
++										\
++		mutex_lock(&bm->mutex);						\
++		count = snprintf(buf, PAGE_SIZE, "%d\n", (int)(bm->member));	\
++		mutex_unlock(&bm->mutex);					\
++										\
++		return count;							\
++	}
++
++#define DEFINE_STORE_INT_FUNC(name, member)					\
++	static ssize_t n810bm_attr_##name##_store(struct device *dev,		\
++						  struct device_attribute *attr,\
++						  const char *buf, size_t count)\
++	{									\
++		struct n810bm *bm = device_to_n810bm(dev);			\
++		long val;							\
++		int err;							\
++										\
++		mutex_lock(&bm->mutex);						\
++		err = strict_strtol(buf, 0, &val);				\
++		if (!err)							\
++			bm->member = (typeof(bm->member))val;			\
++		mutex_unlock(&bm->mutex);					\
++										\
++		return err ? err : count;					\
++	}
++
++#define DEFINE_ATTR_SHOW_INT(name, member)					\
++	DEFINE_SHOW_INT_FUNC(name, member)					\
++	static DEVICE_ATTR(name, S_IRUGO,					\
++			   n810bm_attr_##name##_show, NULL);
++
++#define DEFINE_ATTR_SHOW_STORE_INT(name, member)				\
++	DEFINE_SHOW_INT_FUNC(name, member)					\
++	DEFINE_STORE_INT_FUNC(name, member)					\
++	static DEVICE_ATTR(name, S_IRUGO | S_IWUSR,				\
++			   n810bm_attr_##name##_show,				\
++			   n810bm_attr_##name##_store);
++
++DEFINE_ATTR_SHOW_INT(battery_present, battery_present);
++DEFINE_ATTR_SHOW_INT(charger_present, charger_present);
++DEFINE_ATTR_SHOW_INT(charger_pwm, active_current_pwm);
++static DEFINE_ATTR_NOTIFY(charger_pwm);
++DEFINE_ATTR_SHOW_STORE_INT(charger_enable, charger_enabled);
++DEFINE_ATTR_SHOW_STORE_INT(charger_verbose, verbose_charge_log);
++
++static ssize_t n810bm_attr_battery_charging(struct device *dev,
++					    struct device_attribute *attr,
++					    char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count;
++
++	mutex_lock(&bm->mutex);
++	count = snprintf(buf, PAGE_SIZE, "%d\n",
++			 (int)lipocharge_is_charging(&bm->charger));
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(battery_charging, S_IRUGO,
++		   n810bm_attr_battery_charging, NULL);
++static DEFINE_ATTR_NOTIFY(battery_charging);
++
++static ssize_t n810bm_attr_battery_level_show(struct device *dev,
++					      struct device_attribute *attr,
++					      char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int millivolt;
++
++	mutex_lock(&bm->mutex);
++	if (!bm->battery_present || lipocharge_is_charging(&bm->charger))
++		millivolt = 0;
++	else
++		millivolt = n810bm_measure_batt_voltage(bm);
++	if (millivolt >= 0) {
++		count = snprintf(buf, PAGE_SIZE, "%u\n",
++				 n810bm_mvolt2percent(millivolt));
++	}
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(battery_level, S_IRUGO,
++		   n810bm_attr_battery_level_show, NULL);
++
++static ssize_t n810bm_attr_battery_capacity_show(struct device *dev,
++						 struct device_attribute *attr,
++						 char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count;
++	int capacity = 0;
++
++	mutex_lock(&bm->mutex);
++	if (n810bm_known_battery_present(bm))
++		capacity = (int)bm->capacity;
++	count = snprintf(buf, PAGE_SIZE, "%d\n", capacity);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(battery_capacity, S_IRUGO,
++		   n810bm_attr_battery_capacity_show, NULL);
++
++static ssize_t n810bm_attr_battery_temp_show(struct device *dev,
++					     struct device_attribute *attr,
++					     char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int k;
++
++	mutex_lock(&bm->mutex);
++	k = n810bm_measure_batt_temp(bm);
++	if (k >= 0)
++		count = snprintf(buf, PAGE_SIZE, "%d\n", k);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(battery_temp, S_IRUGO,
++		   n810bm_attr_battery_temp_show, NULL);
++
++static ssize_t n810bm_attr_charger_voltage_show(struct device *dev,
++						struct device_attribute *attr,
++						char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int mv = 0;
++
++	mutex_lock(&bm->mutex);
++	if (bm->charger_present)
++		mv = n810bm_measure_charger_voltage(bm);
++	if (mv >= 0)
++		count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(charger_voltage, S_IRUGO,
++		   n810bm_attr_charger_voltage_show, NULL);
++
++static ssize_t n810bm_attr_backup_battery_voltage_show(struct device *dev,
++						       struct device_attribute *attr,
++						       char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int mv;
++
++	mutex_lock(&bm->mutex);
++	mv = n810bm_measure_backup_batt_voltage(bm);
++	if (mv >= 0)
++		count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(backup_battery_voltage, S_IRUGO,
++		   n810bm_attr_backup_battery_voltage_show, NULL);
++
++static ssize_t n810bm_attr_battery_current_show(struct device *dev,
++						struct device_attribute *attr,
++						char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int ma = 0;
++
++	mutex_lock(&bm->mutex);
++	if (bm->battery_present)
++		ma = n810bm_measure_batt_current_async(bm);
++	count = snprintf(buf, PAGE_SIZE, "%d\n", ma);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(battery_current, S_IRUGO,
++		   n810bm_attr_battery_current_show, NULL);
++
++static const struct device_attribute *n810bm_attrs[] = {
++	&dev_attr_battery_present,
++	&dev_attr_battery_level,
++	&dev_attr_battery_charging,
++	&dev_attr_battery_current,
++	&dev_attr_battery_capacity,
++	&dev_attr_battery_temp,
++	&dev_attr_backup_battery_voltage,
++	&dev_attr_charger_present,
++	&dev_attr_charger_verbose,
++	&dev_attr_charger_voltage,
++	&dev_attr_charger_enable,
++	&dev_attr_charger_pwm,
++};
++
++static void n810bm_notify_work(struct work_struct *work)
++{
++	struct n810bm *bm = container_of(work, struct n810bm, notify_work);
++	unsigned long notify_flags;
++
++	notify_flags = xchg(&bm->notify_flags, 0);
++	mb();
++
++#define do_notify(attr_name)						\
++	do {								\
++		if (notify_flags & (1 << N810BM_NOTIFY_##attr_name)) {	\
++			sysfs_notify(&bm->pdev->dev.kobj, NULL,		\
++				     dev_attr_##attr_name.attr.name);	\
++		}							\
++	} while (0)
++
++	do_notify(battery_charging);
++	do_notify(charger_pwm);
++}
++
++static int n810bm_charger_set_current_pwm(struct lipocharge *c,
++					  unsigned int duty_cycle)
++{
++	struct n810bm *bm = container_of(c, struct n810bm, charger);
++	int err = -EINVAL;
++
++	WARN_ON(!mutex_is_locked(&bm->mutex));
++	if (WARN_ON(duty_cycle > 0xFF))
++		goto out;
++	if (WARN_ON(!bm->charger_enabled))
++		goto out;
++	if (WARN_ON(!bm->battery_present || !bm->charger_present))
++		goto out;
++
++	if (duty_cycle != bm->active_current_pwm) {
++		bm->active_current_pwm = duty_cycle;
++		tahvo_write(bm, TAHVO_REG_CHGCURR, duty_cycle);
++		n810bm_notify_charger_pwm(bm);
++	}
++
++	err = 0;
++out:
++
++	return err;
++}
++
++static void n810bm_charger_emergency(struct lipocharge *c)
++{
++	struct n810bm *bm = container_of(c, struct n810bm, charger);
++
++	n810bm_emergency(bm, "Battery charger fault");
++}
++
++static void n810bm_hw_exit(struct n810bm *bm)
++{
++	n810bm_stop_charge(bm);
++	retu_write(bm, RETU_REG_ADCSCR, 0);
++}
++
++static int n810bm_hw_init(struct n810bm *bm)
++{
++	int err;
++
++	err = n810bm_check_adc_sanity(bm);
++	if (err)
++		return err;
++
++	n810bm_stop_charge(bm);
++
++	return 0;
++}
++
++static void n810bm_cancel_and_flush_work(struct n810bm *bm)
++{
++	cancel_delayed_work_sync(&bm->periodic_check_work);
++	cancel_work_sync(&bm->notify_work);
++	cancel_work_sync(&bm->currmeas_irq_work);
++	flush_scheduled_work();
++}
++
++static int n810bm_device_init(struct n810bm *bm)
++{
++	int attr_index;
++	int err;
++
++	bm->charger.rate = LIPORATE_p6C;
++	bm->charger.top_voltage = 4100;
++	bm->charger.duty_cycle_max = 0xFF;
++	bm->charger.set_current_pwm = n810bm_charger_set_current_pwm;
++	bm->charger.emergency = n810bm_charger_emergency;
++	lipocharge_init(&bm->charger, &bm->pdev->dev);
++
++	err = n810bm_hw_init(bm);
++	if (err)
++		goto error;
++	for (attr_index = 0; attr_index < ARRAY_SIZE(n810bm_attrs); attr_index++) {
++		err = device_create_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
++		if (err)
++			goto err_unwind_attrs;
++	}
++/*XXX
++	err = retu_request_irq(RETU_INT_ADCS,
++			       n810bm_adc_irq_handler,
++			       (unsigned long)bm, "n810bm");
++	if (err)
++		goto err_unwind_attrs;
++*/
++	err = tahvo_request_irq(TAHVO_INT_BATCURR,
++				n810bm_tahvo_current_measure_irq_handler,
++				(unsigned long)bm, "n810bm");
++	if (err)
++		goto err_free_retu_irq;
++	tahvo_disable_irq(TAHVO_INT_BATCURR);
++
++	schedule_delayed_work(&bm->periodic_check_work,
++			      round_jiffies_relative(N810BM_CHECK_INTERVAL));
++
++	bm->initialized = 1;
++	dev_info(&bm->pdev->dev, "Battery management initialized");
++
++	return 0;
++
++err_free_retu_irq:
++//XXX	retu_free_irq(RETU_INT_ADCS);
++err_unwind_attrs:
++	for (attr_index--; attr_index >= 0; attr_index--)
++		device_remove_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
++/*err_exit:*/
++	n810bm_hw_exit(bm);
++error:
++	n810bm_cancel_and_flush_work(bm);
++
++	return err;
++}
++
++static void n810bm_device_exit(struct n810bm *bm)
++{
++	int i;
++
++	if (!bm->initialized)
++		return;
++
++	lipocharge_exit(&bm->charger);
++	tahvo_free_irq(TAHVO_INT_BATCURR);
++//XXX	retu_free_irq(RETU_INT_ADCS);
++	for (i = 0; i < ARRAY_SIZE(n810bm_attrs); i++)
++		device_remove_file(&bm->pdev->dev, n810bm_attrs[i]);
++
++	n810bm_cancel_and_flush_work(bm);
++
++	n810bm_hw_exit(bm);
++
++	bm->initialized = 0;
++}
++
++static void n810bm_pmm_block_found(const struct firmware *fw, void *context)
++{
++	struct n810bm *bm = context;
++	int err;
++
++	if (!fw) {
++		dev_err(&bm->pdev->dev,
++			"CAL PMM block image file not found");
++		goto err_release;
++	}
++	if (fw->size != N810BM_PMM_BLOCK_SIZE ||
++	    memcmp(fw->data, "BME-PMM-BLOCK01", 15) != 0) {
++		dev_err(&bm->pdev->dev,
++			"CAL PMM block image file has an invalid format");
++		goto err_release;
++	}
++
++	err = n810bm_parse_pmm_block(bm, fw);
++	if (err)
++		goto err_release;
++	release_firmware(fw);
++
++	err = n810bm_device_init(bm);
++	if (err) {
++		dev_err(&bm->pdev->dev,
++			"Failed to initialized battery management (%d)", err);
++		goto error;
++	}
++
++	return;
++err_release:
++	release_firmware(fw);
++error:
++	return;
++}
++
++static int __devinit n810bm_probe(void)
++{
++	struct n810bm *bm;
++	int err;
++
++	if (!n810bm_retu_device || !n810bm_tahvo_device)
++		return 0;
++
++	bm = kzalloc(sizeof(*bm), GFP_KERNEL);
++	if (!bm)
++		return -ENOMEM;
++	bm->pdev = n810bm_retu_device;
++	platform_set_drvdata(n810bm_retu_device, bm);
++	platform_set_drvdata(n810bm_tahvo_device, bm);
++	mutex_init(&bm->mutex);
++	INIT_DELAYED_WORK(&bm->periodic_check_work, n810bm_periodic_check_work);
++	INIT_WORK(&bm->notify_work, n810bm_notify_work);
++	INIT_WORK(&bm->currmeas_irq_work, n810bm_tahvo_current_measure_work);
++
++	dev_info(&bm->pdev->dev, "Requesting CAL BME PMM block firmware file "
++		 N810BM_PMM_BLOCK_FILENAME);
++	err = request_firmware_nowait(THIS_MODULE, 1,
++				      N810BM_PMM_BLOCK_FILENAME,
++				      &bm->pdev->dev, GFP_KERNEL,
++				      bm, n810bm_pmm_block_found);
++	if (err) {
++		dev_err(&bm->pdev->dev,
++			"Failed to request CAL PMM block image file (%d)", err);
++		goto err_free;
++	}
++
++	return 0;
++
++err_free:
++	kfree(bm);
++
++	return err;
++}
++
++static void __devexit n810bm_remove(void)
++{
++	struct n810bm *bm;
++
++	if (!n810bm_retu_device || !n810bm_tahvo_device)
++		return;
++	bm = platform_get_drvdata(n810bm_retu_device);
++
++	n810bm_device_exit(bm);
++
++	kfree(bm);
++	platform_set_drvdata(n810bm_retu_device, NULL);
++	platform_set_drvdata(n810bm_tahvo_device, NULL);
++}
++
++static int __devinit n810bm_retu_probe(struct platform_device *pdev)
++{
++	n810bm_retu_device = pdev;
++	return n810bm_probe();
++}
++
++static int __devexit n810bm_retu_remove(struct platform_device *pdev)
++{
++	n810bm_remove();
++	n810bm_retu_device = NULL;
++	return 0;
++}
++
++static int __devinit n810bm_tahvo_probe(struct platform_device *pdev)
++{
++	n810bm_tahvo_device = pdev;
++	return n810bm_probe();
++}
++
++static int __devexit n810bm_tahvo_remove(struct platform_device *pdev)
++{
++	n810bm_remove();
++	n810bm_tahvo_device = NULL;
++	return 0;
++}
++
++static struct platform_driver n810bm_retu_driver = {
++	.remove		= __devexit_p(n810bm_retu_remove),
++	.driver		= {
++		.name	= "retu-n810bm",
++	}
++};
++
++static struct platform_driver n810bm_tahvo_driver = {
++	.remove		= __devexit_p(n810bm_tahvo_remove),
++	.driver		= {
++		.name	= "tahvo-n810bm",
++	}
++};
++
++/* FIXME: for now alloc the device here... */
++static struct platform_device n810bm_tahvo_dev = {
++	.name	= "tahvo-n810bm",
++	.id	= -1,
++};
++
++static int __init n810bm_modinit(void)
++{
++	int err;
++
++	//FIXME
++	err = platform_device_register(&n810bm_tahvo_dev);
++	if (err)
++		return err;
++
++	err = platform_driver_probe(&n810bm_retu_driver, n810bm_retu_probe);
++	if (err)
++		return err;
++	err = platform_driver_probe(&n810bm_tahvo_driver, n810bm_tahvo_probe);
++	if (err) {
++		platform_driver_unregister(&n810bm_retu_driver);
++		return err;
++	}
++
++	return 0;
++}
++module_init(n810bm_modinit);
++
++static void __exit n810bm_modexit(void)
++{
++	//FIXME
++	platform_device_unregister(&n810bm_tahvo_dev);
++
++	platform_driver_unregister(&n810bm_tahvo_driver);
++	platform_driver_unregister(&n810bm_retu_driver);
++}
++module_exit(n810bm_modexit);
++
++MODULE_DESCRIPTION("Nokia n810 battery management");
++MODULE_FIRMWARE(N810BM_PMM_BLOCK_FILENAME);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Michael Buesch");
+Index: linux-2.6.38-rc6/drivers/cbus/lipocharge.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/lipocharge.c	2011-02-26 23:25:39.889753477 +0100
+@@ -0,0 +1,183 @@
++/*
++ *   Generic LIPO battery charger
++ *
++ *   Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
++ *
++ *   This program is free software; you can redistribute it and/or
++ *   modify it under the terms of the GNU General Public License
++ *   as published by the Free Software Foundation; either version 2
++ *   of the License, or (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ */
++
++#define DEBUG
++
++#include "lipocharge.h"
++
++#include <linux/slab.h>
++
++
++/* Hysteresis constants */
++#define CURRENT_HYST		30 /* mA */
++#define VOLTAGE_HYST		10 /* mV */
++
++/* Threshold constants */
++#define FINISH_CURRENT_PERCENT	3
++
++
++/* Returns the requested first-stage charge current in mA */
++static inline unsigned int get_stage1_charge_current(struct lipocharge *c)
++{
++	/* current = (capacity * C) */
++	return c->capacity * c->rate / 1000;
++}
++
++void lipocharge_init(struct lipocharge *c, struct device *dev)
++{
++	c->dev = dev;
++	c->state = LIPO_IDLE;
++}
++
++void lipocharge_exit(struct lipocharge *c)
++{
++	c->state = LIPO_IDLE;
++}
++
++int lipocharge_start(struct lipocharge *c)
++{
++	int err;
++
++	if (c->state != LIPO_IDLE)
++		return -EBUSY;
++	if (!c->set_current_pwm || !c->emergency)
++		return -EINVAL;
++	if (!c->top_voltage || c->top_voltage > 4200)
++		return -EINVAL;
++
++	c->active_duty_cycle = 0;
++	err = c->set_current_pwm(c, c->active_duty_cycle);
++	if (err)
++		return err;
++	c->state = LIPO_FIRST_STAGE;
++
++	return 0;
++}
++
++void lipocharge_stop(struct lipocharge *c)
++{
++	if (c->state == LIPO_IDLE)
++		return;
++	c->state = LIPO_IDLE;
++}
++
++static int lipocharge_increase_current(struct lipocharge *c,
++				       unsigned int inc_permille)
++{
++	int old_pwm, new_pwm;
++
++	if (c->active_duty_cycle >= c->duty_cycle_max)
++		return 0;
++
++	old_pwm = c->active_duty_cycle;
++	new_pwm = old_pwm + (c->duty_cycle_max * inc_permille / 1000);
++	new_pwm = min(new_pwm, (int)c->duty_cycle_max);
++	c->active_duty_cycle = new_pwm;
++
++	dev_dbg(c->dev, "lipo: Increasing duty_cycle by "
++		"%u permille (0x%02X -> 0x%02X)",
++		inc_permille, old_pwm, new_pwm);
++
++	return c->set_current_pwm(c, c->active_duty_cycle);
++}
++
++static int lipocharge_decrease_current(struct lipocharge *c,
++				       unsigned int dec_permille)
++{
++	int old_pwm, new_pwm;
++
++	if (c->active_duty_cycle <= 0)
++		return 0;
++
++	old_pwm = c->active_duty_cycle;
++	new_pwm = old_pwm - (c->duty_cycle_max * dec_permille / 1000);
++	new_pwm = max(0, new_pwm);
++	c->active_duty_cycle = new_pwm;
++
++	dev_dbg(c->dev, "lipo: Decreasing duty_cycle by "
++		"%u permille (0x%02X -> 0x%02X)",
++		dec_permille, old_pwm, new_pwm);
++
++	return c->set_current_pwm(c, c->active_duty_cycle);
++}
++
++/** lipocharge_update_state - Update the charge state
++ * @c: The context.
++ * @voltage_mV: The measured battery voltage.
++ * @current_mA: The measured charge current.
++ *		negative -> drain.
++ *		positive -> charge.
++ * @temp_K: Battery temperature in K.
++ *
++ * Returns 0 on success, -1 on error.
++ * Returns 1, if the charging process is finished.
++ */
++int lipocharge_update_state(struct lipocharge *c,
++			    unsigned int voltage_mV,
++			    int current_mA,
++			    unsigned int temp_K)
++{
++	int requested_current, current_diff;
++	int err;
++	unsigned int permille;
++
++	//TODO temp
++
++restart:
++	switch (c->state) {
++	case LIPO_IDLE:
++		dev_err(c->dev, "%s: called while idle", __func__);
++		return -EINVAL;
++	case LIPO_FIRST_STAGE:	/* Constant current */
++//printk("GOT %u %d %u\n", voltage_mV, current_mA, temp_K);
++		if (voltage_mV >= c->top_voltage) {
++			/* Float voltage reached.
++			 * Switch charger mode to "constant current" */
++			c->state = LIPO_SECOND_STAGE;
++			dev_dbg(c->dev, "Switched to second charging stage.");
++			goto restart;
++		}
++		/* Float voltage not reached, yet.
++		 * Try to get the requested constant current. */
++		requested_current = get_stage1_charge_current(c);
++		if (current_mA < 0)
++			current_mA = 0;
++		current_diff = requested_current - current_mA;
++		if (abs(requested_current - current_mA) > CURRENT_HYST) {
++			if (current_diff > 0) {
++				/* Increase current */
++				permille = current_diff * 1000 / requested_current;
++				permille /= 2;
++				err = lipocharge_increase_current(c, permille);
++				if (err)
++					return err;
++			} else {
++				/* Decrease current */
++				permille = (-current_diff) * 1000 / requested_current;
++				permille /= 2;
++				err = lipocharge_decrease_current(c, permille);
++				if (err)
++					return err;
++			}
++		}
++		break;
++	case LIPO_SECOND_STAGE:	/* Constant voltage */
++		//TODO
++		break;
++	}
++
++	return 0;
++}
+Index: linux-2.6.38-rc6/drivers/cbus/lipocharge.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.38-rc6/drivers/cbus/lipocharge.h	2011-02-26 23:25:39.890753496 +0100
+@@ -0,0 +1,60 @@
++#ifndef LIPOCHARGE_H_
++#define LIPOCHARGE_H_
++
++#include <linux/types.h>
++#include <linux/device.h>
++
++
++#define LIPORATE(a,b)	(((a) * 1000) + ((b) * 100))
++#define LIPORATE_p6C	LIPORATE(0,6)	/* 0.6C */
++
++enum lipocharge_state {
++	LIPO_IDLE,		/* Not charging */
++	LIPO_FIRST_STAGE,	/* Charging: constant current */
++	LIPO_SECOND_STAGE,	/* Charging: constant voltage */
++};
++
++/** struct lipocharge - A generic LIPO charger
++ *
++ * @capacity: Battery capacity in mAh.
++ * @rate: Charge rate.
++ * @top_voltage: Fully charged voltage, in mV.
++ * @duty_cycle_max: Max value for duty_cycle.
++ *
++ * @set_charge_current: Set the charge current PWM duty cycle.
++ * @emergency: Something went wrong. Force shutdown.
++ */
++struct lipocharge {
++	unsigned int capacity;
++	unsigned int rate;
++	unsigned int top_voltage;
++	unsigned int duty_cycle_max;
++
++	int (*set_current_pwm)(struct lipocharge *c, unsigned int duty_cycle);
++	void (*emergency)(struct lipocharge *c);
++
++	/* internal */
++	struct device *dev;
++	enum lipocharge_state state;
++	unsigned int active_duty_cycle;
++
++	//TODO implement timer to cut power after maximum charge time.
++};
++
++void lipocharge_init(struct lipocharge *c, struct device *dev);
++void lipocharge_exit(struct lipocharge *c);
++
++int lipocharge_start(struct lipocharge *c);
++void lipocharge_stop(struct lipocharge *c);
++
++int lipocharge_update_state(struct lipocharge *c,
++			    unsigned int voltage_mV,
++			    int current_mA,
++			    unsigned int temp_K);
++
++static inline bool lipocharge_is_charging(struct lipocharge *c)
++{
++	return (c->state != LIPO_IDLE);
++}
++
++#endif /* LIPOCHARGE_H_ */
+Index: linux-2.6.38-rc6/drivers/cbus/cbus.c
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/cbus/cbus.c	2011-02-26 23:22:54.992733511 +0100
++++ linux-2.6.38-rc6/drivers/cbus/cbus.c	2011-02-26 23:25:39.890753496 +0100
+@@ -35,6 +35,7 @@
+ #include <linux/platform_device.h>
+ 
+ #include <plat/cbus.h>
++#include <linux/reboot.h>
+ 
+ #include "cbus.h"
+ 
+@@ -323,6 +324,13 @@
+ }
+ module_exit(cbus_bus_exit);
+ 
++void cbus_emergency(void)
++{
++	machine_power_off();
++	panic("cbus: Failed to halt machine in emergency state\n");
++}
++EXPORT_SYMBOL(cbus_emergency);
++
+ MODULE_DESCRIPTION("CBUS serial protocol");
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Juha Yrjölä");
+Index: linux-2.6.38-rc6/drivers/cbus/cbus.h
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/cbus/cbus.h	2011-02-26 23:22:54.975733211 +0100
++++ linux-2.6.38-rc6/drivers/cbus/cbus.h	2011-02-26 23:25:39.891753515 +0100
+@@ -26,4 +26,6 @@
+ extern int cbus_read_reg(unsigned dev, unsigned reg);
+ extern int cbus_write_reg(unsigned dev, unsigned reg, unsigned val);
+ 
++NORET_TYPE void cbus_emergency(void) ATTRIB_NORET;
++
+ #endif /* __DRIVERS_CBUS_CBUS_H */
+Index: linux-2.6.38-rc6/drivers/cbus/retu.c
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/cbus/retu.c	2011-02-26 23:25:18.905358127 +0100
++++ linux-2.6.38-rc6/drivers/cbus/retu.c	2011-02-26 23:25:39.891753515 +0100
+@@ -423,6 +423,11 @@
+ 	if (!child)
+ 		return -ENOMEM;
+ 
++	child = retu_allocate_child("retu-n810bm", parent, irq_base,
++			RETU_INT_ADCS, -1, 1);
++	if (!child)
++		return -ENOMEM;
++
+ 	return 0;
+ }
+ 
+Index: linux-2.6.38-rc6/drivers/cbus/tahvo.c
+===================================================================
+--- linux-2.6.38-rc6.orig/drivers/cbus/tahvo.c	2011-02-26 23:22:54.894731777 +0100
++++ linux-2.6.38-rc6/drivers/cbus/tahvo.c	2011-02-26 23:25:39.891753515 +0100
+@@ -115,6 +115,7 @@
+ 	tahvo_write_reg(reg, w);
+ 	spin_unlock_irqrestore(&tahvo_lock, flags);
+ }
++EXPORT_SYMBOL(tahvo_set_clear_reg_bits);
+ 
+ /*
+  * Disable given TAHVO interrupt