mirko [Sat, 4 Dec 2010 17:04:39 +0000 (17:04 +0000)]
[package/iptables] the switch to libtool2 seems to cause the iptables build environment not building static libraries anymore, for whatever reason.. since we don't need them anyway, just do no try to copy them over anymore
mirko [Sat, 4 Dec 2010 13:44:43 +0000 (13:44 +0000)]
[trunk/include/autotools.mk] ensure accidentally installed *.la-files (into $STAGING_DIR) are going to be removed afterwards - this actually should be done within respective package-Makefiles itself, however they need to stay compatible with libtool v1.5.x which is used in backfire, since it (may) require those files
nbd [Sat, 4 Dec 2010 01:32:15 +0000 (01:32 +0000)]
ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues
cshore [Fri, 3 Dec 2010 20:01:23 +0000 (20:01 +0000)]
[package] block-extroot: Added md5sum to extroot and underlying root filesystem. This is used to ensure that the extroot is not mounted as the rootfs after a sysupgrade *until the user deals with the extroot).
mirko [Fri, 3 Dec 2010 11:56:47 +0000 (11:56 +0000)]
update libtool from version 1.5.26 to version 2.4, this includes libltdl (to v7) - WARNING: This switch is going to break something quite likely, however since more software is requiring libtool2/libltdl7 this change needs to be done some day anyway
jow [Thu, 2 Dec 2010 20:19:55 +0000 (20:19 +0000)]
[ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
jow [Tue, 30 Nov 2010 01:52:51 +0000 (01:52 +0000)]
[kernel] backport two changes from kernel.org: 65e9b62d4503849b10bedfc29bff0473760cc597
ipv6: add special mode accept_ra=2 to accept RA while configured as router
cshore [Sun, 28 Nov 2010 22:04:44 +0000 (22:04 +0000)]
bcm63xx: Add support for the T-Com Speedport W 500V.
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
cshore [Sun, 28 Nov 2010 22:04:40 +0000 (22:04 +0000)]
bcm63xx: Add board id override fixup.
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.
Also modify the image generation to generate apropriately tagged images.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
cshore [Sun, 28 Nov 2010 22:04:36 +0000 (22:04 +0000)]
bcm63xx: Finalize support for DSL-274xB, rev C2.
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
cshore [Sun, 28 Nov 2010 22:04:30 +0000 (22:04 +0000)]
bcm63xx: Allow 'colored' power leds.
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
cshore [Sun, 28 Nov 2010 22:04:26 +0000 (22:04 +0000)]
bcm63xx: Don't hardcode the switch ethernet interface in preinit.
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
cshore [Sun, 28 Nov 2010 22:04:19 +0000 (22:04 +0000)]
bcm63xx: Add defconfigs.
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
hauke [Thu, 25 Nov 2010 14:45:18 +0000 (14:45 +0000)]
mac80211: cfg80211 should not depend on rfkill.
If rfkill is build as an module CONFIG_RFKILL_MODULE is set and cfg80211 will also depend on that.
Now all modules build from compat-wireless will not use rfkill.
nbd [Wed, 24 Nov 2010 14:07:12 +0000 (14:07 +0000)]
change the recursive dependency template to use more make evaluation - the shell command got so long that it triggered "Argument list too long" on some systems (#8231)
cshore [Wed, 24 Nov 2010 11:06:13 +0000 (11:06 +0000)]
[brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
juhosg [Wed, 24 Nov 2010 10:01:21 +0000 (10:01 +0000)]
generic: add rtl8366rb switch vlan fid support
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
juhosg [Wed, 24 Nov 2010 10:01:16 +0000 (10:01 +0000)]
ramips: DMA map the correct RX skb size
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73