florian [Sun, 29 Jan 2012 15:00:33 +0000 (15:00 +0000)]
[ep93xx] add 3.2 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29941
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 29 Jan 2012 15:00:29 +0000 (15:00 +0000)]
[kernel] add another 3.2 framebuffer symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29940
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 29 Jan 2012 15:00:25 +0000 (15:00 +0000)]
[au1000] add support for 3.2 kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29939
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 28 Jan 2012 13:52:37 +0000 (13:52 +0000)]
switch: fix some memory leaks in switch_parse_vlan()
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29936
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sat, 28 Jan 2012 13:19:49 +0000 (13:19 +0000)]
[ar71xx] add support for the Atheros AP113 reference board
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sat, 28 Jan 2012 13:19:43 +0000 (13:19 +0000)]
[ar71xx] refresh 3.2 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29934
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sat, 28 Jan 2012 04:42:15 +0000 (04:42 +0000)]
[tools] autoconf: another relocatability fix for autom4te, substitute hardcoded prefix with $STAGING_DIR when reading autom4te.cfg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29931
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sat, 28 Jan 2012 03:51:22 +0000 (03:51 +0000)]
[tools] automake: generate relative aclocal symlinks in staging_dir
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29929
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sat, 28 Jan 2012 03:30:30 +0000 (03:30 +0000)]
[sdk] make sure .config gets copied as file
When using scripts/env, .config is most likely a symbolic link
pointing to env/.config. Previously the symbolic link got
copied as-is into the SDK tarball, leading to a dangling .config
symlink on the target system which prevented the SDK from working.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29927
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Fri, 27 Jan 2012 20:10:51 +0000 (20:10 +0000)]
brcm47xx: add fix for cardbus host controller
These devices have two devices on the bus, the host controller itself and the device.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29923
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Fri, 27 Jan 2012 20:08:49 +0000 (20:08 +0000)]
mac80211: fix patch when running on ssb based devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29922
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 27 Jan 2012 15:35:29 +0000 (15:35 +0000)]
ath9k: revert one more linux upstream commit in the initvals to fully fix the ar938x tx power issue
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29920
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 27 Jan 2012 11:06:32 +0000 (11:06 +0000)]
ath9k: fix initvals for high-power ar938x devices, fixes tx power on buffalo wzr-hp-g450h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29918
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 27 Jan 2012 10:42:41 +0000 (10:42 +0000)]
ar71xx: use 64k block size for WZR-HP-AG300H
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29917
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 27 Jan 2012 07:51:09 +0000 (07:51 +0000)]
ar71xx: fix sysupgrade image building of atheros boards after r29899
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29916
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 26 Jan 2012 21:28:34 +0000 (21:28 +0000)]
ar71xx: create the temporary directory before building initramfs images
Thanks to Florian for reporting.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29915
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 26 Jan 2012 17:01:44 +0000 (17:01 +0000)]
ar71xx: create a profile and build images for Compex WPE72
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29914
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 26 Jan 2012 17:01:43 +0000 (17:01 +0000)]
firmware-utils/mkmylofw: add WPE72 support
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29913
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 26 Jan 2012 17:01:41 +0000 (17:01 +0000)]
ar71xx: add support for Compex WPE72/WPE72NX
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.
[juhosg: add support to 3.2 as well]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 26 Jan 2012 17:01:38 +0000 (17:01 +0000)]
generic: add WPE72 ID to myloader.h
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29911
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 26 Jan 2012 10:44:23 +0000 (10:44 +0000)]
ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.
There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.
Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt
[juhosg: reordered some parts in order to keep things sorted
alphabetically]
Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 25 Jan 2012 07:44:46 +0000 (07:44 +0000)]
mac80211: enable support for RaLink Rt53xx USB devices in rt2800usb
Hi!
On Mon, Nov 14, 2011 at 03:01:34PM +0100, Daniel Golle wrote:
> The driver works quite nice and stable for me using a RaLink Rt5370 USB device.
>
> Signed-off-by: Daniel Golle <dgolle@allnet.de>
>
> Index: package/mac80211/Makefile
> ===================================================================
> --- package/mac80211/Makefile (revision 29114)
> +++ package/mac80211/Makefile (working copy)
> @@ -1147,6 +1147,7 @@
> CONFIG_RT2800_LIB=$(if $(CONFIG_PACKAGE_kmod-rt2800-lib),m) \
> CONFIG_RT2800PCI=$(if $(CONFIG_PACKAGE_kmod-rt2800-pci),m) \
> CONFIG_RT2800USB=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),m) \
> + CONFIG_RT2800USB_RT53XX=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),y) \
> CONFIG_RTL8180=$(if $(CONFIG_PACKAGE_kmod-rtl8180),m) \
> CONFIG_RTL8187=$(if $(CONFIG_PACKAGE_kmod-rtl8187),m) \
> CONFIG_RTL8192CE= \
Aparently this was wrong, CONFIG_RT2800USB_RT53XX is supposed to live in
BUILDARGS rather than MAKE_OPTS to actually get support for the Rt5370.
Thanks to actmnophn for the hint!
This reverts changeset 29116 and adds it to the right section in the Makefile.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29906
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 25 Jan 2012 07:44:45 +0000 (07:44 +0000)]
ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour
This patch fixes the board detection of the TL-MR3020.
The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.
The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.
[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 25 Jan 2012 07:44:43 +0000 (07:44 +0000)]
ar71xx: TL-MR3020: fix GPIO polarity for button and switch
This patch fixes the GPIO polarity for the button and the sliding
switch. The buttons are not active low. "Pressed" and "Released"
events are wrong without the patch.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29904
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 24 Jan 2012 21:44:00 +0000 (21:44 +0000)]
netifd: update to latest, fixes a crash when the interface protocol was not specified
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29903
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 24 Jan 2012 20:54:13 +0000 (20:54 +0000)]
[package] hostapd: introduce a client_cert option which is passed on to wpa_supplicant (#8876)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29901
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 20:12:10 +0000 (20:12 +0000)]
ar71xx: use the lzma loader on the Planex boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 20:12:08 +0000 (20:12 +0000)]
ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 18:40:38 +0000 (18:40 +0000)]
ar71xx: fix the AP/Router LED definitons on MZK-W300NH
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29897
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 18:40:36 +0000 (18:40 +0000)]
ar71xx: preset WLAN LED config on MZK-W300NH
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 18:40:34 +0000 (18:40 +0000)]
ar71xx: remove hardcoded MTD layout from planex files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29895
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 18:40:33 +0000 (18:40 +0000)]
ar71xx: pass mtdlayout to Planex boards via command line
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 18:40:31 +0000 (18:40 +0000)]
ar71xx: remove an unused header file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29893
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 11:48:48 +0000 (11:48 +0000)]
ramips: generate sysupgrade image for the ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29884
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 11:48:47 +0000 (11:48 +0000)]
ramips: add user-space support for ALL0256N
This adds uci-defaults and sysupgrade support for the ALL0256N.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29883
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 11:48:45 +0000 (11:48 +0000)]
ramips: add kernel support for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29882
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Jan 2012 11:31:23 +0000 (11:31 +0000)]
[lantiq] Initial DSL framework
- Removed ifx_cpe_control_init.sh (the old init script)
- Created dsl_control (/etc/init.d)
- tidied up start and stop
- stop calls dsl_notify before killing daemon
- has status and lucistat options to provide detail
- copes with daemon not running situation
- Updated package makefile to use new init script and to build cli support
- Provide a dsl_notify.sh script to cope with line up/down events
Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29881
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 09:47:25 +0000 (09:47 +0000)]
ar71xx: nuke fs_all variable in image/Makefile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 09:47:23 +0000 (09:47 +0000)]
ar71xx: create interim kernel files in a separate dir
This reduces the size of the ImageBuilder tarball a lot.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 09:47:22 +0000 (09:47 +0000)]
ar71xx: prebuild all loaders in Image/Prepare stage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 24 Jan 2012 09:47:20 +0000 (09:47 +0000)]
ImageBuilder: respect the PROFILE parameter
Based on a patch from #10766
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29877
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 24 Jan 2012 01:49:23 +0000 (01:49 +0000)]
hostapd: merge an upstream workaround for broken clients sending the wrong wpa type (should fix #9561)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29876
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 23 Jan 2012 10:23:32 +0000 (10:23 +0000)]
ramips: scripts updates
In this patch:
* rename Argus leds to avoid underscores
* rename Belkin
F5D8235 v1 leds from
f5d8234 to
f5d8235
* remove Belkin
F5D8235 v1 status led defined as storage led (it was
defined as usb led earlier, just in wrong place) - it should have
router led as in v2
* add Argus, Sparklan and Belkin
F5D8235 v2 status leds
* add Belkin
F5D8235 v1 and v2 usb leds
* fix Belkin
F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
default and the led is hidden also but if you are going to solder
the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29871
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 23 Jan 2012 08:52:21 +0000 (08:52 +0000)]
ar71xx: 3.2: fix build errors if PCI is not enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29870
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 23 Jan 2012 08:52:18 +0000 (08:52 +0000)]
ar71xx: fix compiler warning if PCI is not enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29869
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 22:38:19 +0000 (22:38 +0000)]
ar71xx: add initial support for 3.2
Tested on the following boards:
ALFA AP96
TL-MR3220 v1
TL-WR1043ND v1
TL-WR2543ND v1
TL-WR703N v1
TL-WR741ND v1
TL-WR741ND v4
WNDR3700 v1
WZR-HP-G300NH
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29868
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 22:38:11 +0000 (22:38 +0000)]
ar71xx: move arch specific files to files-2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 22:33:15 +0000 (22:33 +0000)]
ar71xx: build ALFA AP96 images with default profile as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 22 Jan 2012 22:25:42 +0000 (22:25 +0000)]
[package] base-files: add a uci-defaults script which will migrate the root password to /etc/shadow if needed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29865
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 22 Jan 2012 21:14:30 +0000 (21:14 +0000)]
netifd: update to latest version, add some more status info and rework shell proto handler support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29864
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 22 Jan 2012 21:14:26 +0000 (21:14 +0000)]
netifd: always issue a reload on ifup, not just for -a
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29863
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 22 Jan 2012 21:14:22 +0000 (21:14 +0000)]
base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29862
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 18:43:45 +0000 (18:43 +0000)]
package/kernel: add ATH79 symbols for OHCI/EHCI drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29861
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 18:43:39 +0000 (18:43 +0000)]
generic: 3.2: allow to build myloader mtd parser for ATH79
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29860
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 18:36:49 +0000 (18:36 +0000)]
generic: allow to build myloader mtd parser for 3.2+
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29858
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 18:11:39 +0000 (18:11 +0000)]
ramips fix
f5d8235-v1 diag LED support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29857
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 17:55:38 +0000 (17:55 +0000)]
ar71xx: wrt160nl_part: include module.h and fix compiler warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 17:55:36 +0000 (17:55 +0000)]
ar71xx: tplinkpart: include module.h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 13:51:57 +0000 (13:51 +0000)]
ar71xx: rename vsc7385 spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 13:51:56 +0000 (13:51 +0000)]
ar71xx: rename ap81 spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 13:51:54 +0000 (13:51 +0000)]
ar71xx: rename rb4xx spi drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 13:51:52 +0000 (13:51 +0000)]
ar71xx: rename the nxp_74hc153 driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 13:51:50 +0000 (13:51 +0000)]
ar71xx: change board id of the UniFi board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 13:51:49 +0000 (13:51 +0000)]
ar71xx: include linux/module.h in the micrel phy driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 13:43:23 +0000 (13:43 +0000)]
ramips: add sysled and sysupgrade to wr512-3gn
Patch from #10035.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29847
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 22 Jan 2012 09:57:39 +0000 (09:57 +0000)]
generic: 3.2: don't disable lockdep for OOT modules
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29846
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 21 Jan 2012 22:44:09 +0000 (22:44 +0000)]
generic: rtl8366: add rtl8366_smi_write_reg_noack helper
After issuing a soft reset on the RT8366{S,RB}
switch, waiting for the last acknowlegement fails
in rtl8366_smi_write_reg. Add a _noack version of
the function and use that for issuing a soft reset.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29844
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 21 Jan 2012 22:39:20 +0000 (22:39 +0000)]
brcm47xx: add support for pcie host controller on bcma based SoCs.
This also adds minimal support for the BCMA43224 pcie wireless card.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29843
3c298f89-4303-0410-b956-
a3cf2f4a3e73
mirko [Sat, 21 Jan 2012 19:39:37 +0000 (19:39 +0000)]
[toolchain/eglibc] eglibc 2.14 needs our eglibc patchset as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29842
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sat, 21 Jan 2012 09:49:53 +0000 (09:49 +0000)]
[tools] libtool: fix accidental sed invocation in libtoolize
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29839
3c298f89-4303-0410-b956-
a3cf2f4a3e73
mirko [Sat, 21 Jan 2012 01:15:24 +0000 (01:15 +0000)]
trying to make README file a bit more helpful
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29837
3c298f89-4303-0410-b956-
a3cf2f4a3e73
mirko [Fri, 20 Jan 2012 22:54:30 +0000 (22:54 +0000)]
[toolchain/binutils] adjust md5sum of v2.21.1 since archive got replaced meanwhile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29836
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 21:31:03 +0000 (21:31 +0000)]
[include] autotools.mk: fix autoreconf in subdirectories, thanks field_it for spotting this
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29835
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 17:54:43 +0000 (17:54 +0000)]
[tools] quilt: some more relocatable fixes for quilt-internal scripts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29834
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 17:36:30 +0000 (17:36 +0000)]
[package] openssl: update to v1.0.0g (CVE-2012-0050)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29832
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 17:30:38 +0000 (17:30 +0000)]
[tools] bison: make yacc wrapper relocatable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29831
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 17:17:04 +0000 (17:17 +0000)]
[toolsÂ] autoconf: make bin/autoconf relocatable as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29830
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 17:11:37 +0000 (17:11 +0000)]
[tools] quilt: make relocatable, search resources relative to STAGING_DIR
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29829
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 15:19:22 +0000 (15:19 +0000)]
[tools] automake: further relocation fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29828
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 15:19:06 +0000 (15:19 +0000)]
[tools] autoconf: further relocation fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29827
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 14:51:44 +0000 (14:51 +0000)]
[tools] libtool: make relocatable, search resources relative to STAGING_DIR
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29826
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 12:59:20 +0000 (12:59 +0000)]
[package] remove empty br2684ctl
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29825
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 20 Jan 2012 10:49:26 +0000 (10:49 +0000)]
ramips: sysupgrade for ESR-9753
This patch add sysupgrade for Engenius ESR-9753
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29824
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 02:56:08 +0000 (02:56 +0000)]
[tools] autoconf: make relocatable by searching resources relative to STAGING_DIR
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29821
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 Jan 2012 02:55:55 +0000 (02:55 +0000)]
[tools] automake: make relocatable by searching resources relative to STAGING_DIR
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29820
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Thu, 19 Jan 2012 19:51:54 +0000 (19:51 +0000)]
kernel: fix OCF for linux 3.2
Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29818
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 15:37:47 +0000 (15:37 +0000)]
[package] base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29806
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 12:19:28 +0000 (12:19 +0000)]
[buildroot] abort built in prereq target if there is no site config file for the current target
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29798
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Thu, 19 Jan 2012 08:25:26 +0000 (08:25 +0000)]
package: kernel: fix files for blowfish and pcimcia-rsrc
Based on a patch from Philip Prindeville.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29797
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 03:10:27 +0000 (03:10 +0000)]
[include] site: add configure cache scripts for mips-linux-gnu and mipsel-linux-gnu, used by CodeSourcery toolchain
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29794
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 01:57:22 +0000 (01:57 +0000)]
[adm5120] add missing kernel symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29790
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 01:50:53 +0000 (01:50 +0000)]
[package] busybox: fix previous commit, make CONFIG_BUSYBOX_CONFIG_FEATURE_IPV6 default to CONFIG_IPV6, not depend on it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29789
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 01:33:53 +0000 (01:33 +0000)]
[package] busybox: make CONFIG_BUSYBOX_CONFIG_FEATURE_IPV6 depend on CONFIG_IPV6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29788
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 01:14:45 +0000 (01:14 +0000)]
Make the grub timeout configurable on x86 targets
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29786
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 00:31:39 +0000 (00:31 +0000)]
x86/config-3.2: add linux-3.2 symbols for x86
The following symbols are missing for x86, in sorted order.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29783
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 00:03:52 +0000 (00:03 +0000)]
[scripts] ext-toolchain.sh: CONFIG_NLS -> CONFIG_BUILD_NLS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29782
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 19 Jan 2012 00:01:54 +0000 (00:01 +0000)]
[scripts] ext-toolchain.sh: fix typo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29781
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 18 Jan 2012 23:46:06 +0000 (23:46 +0000)]
[scripts] ext-toolchain.sh: add option to write .config
Add a new --config option to generate a .config from a given toolchain,
this allows for easy integration of external toolchains, e.g.
./scripts/ext-toolchain.sh --toolchain /opt/mips-2011.03 --cflags "-muclibc" --config atheros
to setup a ready-to-compile atheros target using the external CodeSourcery toolchain.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29780
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 18 Jan 2012 19:22:14 +0000 (19:22 +0000)]
[package] mtd: external toolchains usually do not know about MTDREFRESH, so search in $(LINUX_DIR)/include first, fixes compilation with external CodeSourcery toolchain
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29779
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 18 Jan 2012 19:05:48 +0000 (19:05 +0000)]
[package] iptables: pass --disable-ipv6 if CONFIG_IPV6 is off, fixes undefined refs to in6addr_any when compiling with external CodeSourcery toolchain
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29778
3c298f89-4303-0410-b956-
a3cf2f4a3e73