--- Prosody Example Configuration File \r
--- \r
--- If it wasn't already obvious, -- starts a comment, and all \r
--- text after it on a line is ignored by Prosody.\r
---\r
--- The config is split into sections, a global section, and one \r
--- for each defined host that we serve. You can add as many host \r
--- sections as you like.\r
---\r
--- Lists are written { "like", "this", "one" } \r
--- Lists can also be of { 1, 2, 3 } numbers, and other things. \r
--- Either commas, or semi-colons; may be used\r
--- as seperators.\r
---\r
--- A table is a list of values, except each value has a name. An \r
--- example table would be:\r
---\r
--- ssl = { key = "keyfile.key", certificate = "certificate.cert" }\r
---\r
--- Whitespace (that is tabs, spaces, line breaks) is mostly insignificant, so \r
--- can \r
--- be placed anywhere that you deem fitting.\r
---\r
--- Tip: You can check that the syntax of this file is correct when you have finished\r
--- by running: luac -p prosody.cfg.lua\r
--- If there are any errors, it will let you know what and where they are, otherwise it \r
--- will keep quiet.\r
---\r
--- The only thing left to do is rename this file to remove the .dist ending, and fill in the \r
--- blanks. Good luck, and happy Jabbering!\r
-\r
--- Server-wide settings go in this section\r
-Host "*"\r
- \r
- -- This is a (by default, empty) list of accounts that are admins \r
- -- for the server. Note that you must create the accounts separately\r
- -- (see http://prosody.im/doc/creating_accounts for info)\r
- -- Example: admins = { "user1@example.com", "user2@example.net" }\r
- admins = { }\r
- \r
- -- This is the list of modules Prosody will load on startup.\r
- -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.\r
- modules_enabled = {\r
- -- Generally required\r
- "roster"; -- Allow users to have a roster. Recommended ;)\r
- "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.\r
- "tls"; -- Add support for secure TLS on c2s/s2s connections\r
- "dialback"; -- s2s dialback support\r
- "disco"; -- Service discovery\r
- \r
- -- Not essential, but recommended\r
- "private"; -- Private XML storage (for room bookmarks, etc.)\r
- "vcard"; -- Allow users to set vCards\r
- \r
- -- Nice to have\r
- "legacyauth"; -- Legacy authentication. Only used by some old clients and bots.\r
- "version"; -- Replies to server version requests\r
- "uptime"; -- Report how long server has been running\r
- "time"; -- Let others know the time here on this server\r
- "ping"; -- Replies to XMPP pings with pongs\r
- "pep"; -- Enables users to publish their mood, activity, playing music and more\r
- "register"; -- Allow users to register on this server using a client and change passwords\r
-\r
- -- Other specific functionality\r
- --"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.\r
- --"console"; -- telnet to port 5582 (needs console_enabled = true)\r
- --"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"\r
- --"httpserver"; -- Serve static files from a directory over HTTP\r
- };\r
- \r
- -- These modules are auto-loaded, should you\r
- -- for (for some mad reason) want to disable\r
- -- them then uncomment them below\r
- modules_disabled = {\r
- -- "presence";\r
- -- "message";\r
- -- "iq";\r
- };\r
-\r
- -- Disable account creation by default, for security\r
- -- For more information see http://prosody.im/doc/creating_accounts\r
- allow_registration = false;\r
- \r
- -- These are the SSL/TLS-related settings. If you don't want\r
- -- to use SSL/TLS, you may comment or remove this\r
- ssl = { \r
- key = "certs/localhost.key";\r
- certificate = "certs/localhost.cert";\r
- }\r
-\r
--- This allows clients to connect to localhost. No harm in it.\r
-Host "localhost"\r
-\r
--- Section for example.com\r
--- (replace example.com with your domain name)\r
-Host "example.com"\r
-\r
- enabled = false -- This will disable the host, preserving the config, but denying connections\r
-\r
- -- Assign this host a certificate for TLS, otherwise it would use the one\r
- -- set in the global section (if any).\r
- -- Note that old-style SSL on port 5223 only supports one certificate, and will always\r
- -- use the global one.\r
- ssl = { \r
- key = "certs/example.com.key";\r
- certificate = "certs/example.com.crt";\r
- }\r
-\r
--- Set up a MUC (multi-user chat) room server on conference.example.com:\r
-Component "conference.example.com" "muc"\r
+-- Prosody Example Configuration File
+--
+-- If it wasn't already obvious, -- starts a comment, and all
+-- text after it on a line is ignored by Prosody.
+--
+-- The config is split into sections, a global section, and one
+-- for each defined host that we serve. You can add as many host
+-- sections as you like.
+--
+-- Lists are written { "like", "this", "one" }
+-- Lists can also be of { 1, 2, 3 } numbers, and other things.
+-- Either commas, or semi-colons; may be used
+-- as seperators.
+--
+-- A table is a list of values, except each value has a name. An
+-- example table would be:
+--
+-- ssl = { key = "keyfile.key", certificate = "certificate.cert" }
+--
+-- Whitespace (that is tabs, spaces, line breaks) is mostly insignificant, so
+-- can
+-- be placed anywhere that you deem fitting.
+--
+-- Tip: You can check that the syntax of this file is correct when you have finished
+-- by running: luac -p prosody.cfg.lua
+-- If there are any errors, it will let you know what and where they are, otherwise it
+-- will keep quiet.
+--
+-- The only thing left to do is rename this file to remove the .dist ending, and fill in the
+-- blanks. Good luck, and happy Jabbering!
+
+-- Server-wide settings go in this section
+Host "*"
+
+ -- This is a (by default, empty) list of accounts that are admins
+ -- for the server. Note that you must create the accounts separately
+ -- (see http://prosody.im/doc/creating_accounts for info)
+ -- Example: admins = { "user1@example.com", "user2@example.net" }
+ admins = { }
+
+ -- This is the list of modules Prosody will load on startup.
+ -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
+ modules_enabled = {
+ -- Generally required
+ "roster"; -- Allow users to have a roster. Recommended ;)
+ "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
+ "tls"; -- Add support for secure TLS on c2s/s2s connections
+ "dialback"; -- s2s dialback support
+ "disco"; -- Service discovery
+
+ -- Not essential, but recommended
+ "private"; -- Private XML storage (for room bookmarks, etc.)
+ "vcard"; -- Allow users to set vCards
+
+ -- Nice to have
+ "legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
+ "version"; -- Replies to server version requests
+ "uptime"; -- Report how long server has been running
+ "time"; -- Let others know the time here on this server
+ "ping"; -- Replies to XMPP pings with pongs
+ "pep"; -- Enables users to publish their mood, activity, playing music and more
+ "register"; -- Allow users to register on this server using a client and change passwords
+
+ -- Other specific functionality
+ --"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
+ --"console"; -- telnet to port 5582 (needs console_enabled = true)
+ --"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
+ --"httpserver"; -- Serve static files from a directory over HTTP
+ };
+
+ -- These modules are auto-loaded, should you
+ -- for (for some mad reason) want to disable
+ -- them then uncomment them below
+ modules_disabled = {
+ -- "presence";
+ -- "message";
+ -- "iq";
+ };
+
+ -- Disable account creation by default, for security
+ -- For more information see http://prosody.im/doc/creating_accounts
+ allow_registration = false;
+
+ -- These are the SSL/TLS-related settings. If you don't want
+ -- to use SSL/TLS, you may comment or remove this
+ ssl = {
+ key = "certs/localhost.key";
+ certificate = "certs/localhost.cert";
+ }
+
+-- This allows clients to connect to localhost. No harm in it.
+Host "localhost"
+
+-- Section for example.com
+-- (replace example.com with your domain name)
+Host "example.com"
+
+ enabled = false -- This will disable the host, preserving the config, but denying connections
+
+ -- Assign this host a certificate for TLS, otherwise it would use the one
+ -- set in the global section (if any).
+ -- Note that old-style SSL on port 5223 only supports one certificate, and will always
+ -- use the global one.
+ ssl = {
+ key = "certs/example.com.key";
+ certificate = "certs/example.com.crt";
+ }
+
+-- Set up a MUC (multi-user chat) room server on conference.example.com:
+Component "conference.example.com" "muc"
projects / prosody.git / commitdiff