Rename and update config. Update Makefile for this change.
authorMatthew Wild <mwild1@gmail.com>
Sat, 29 Nov 2008 02:28:00 +0000 (02:28 +0000)
committerMatthew Wild <mwild1@gmail.com>
Sat, 29 Nov 2008 02:28:00 +0000 (02:28 +0000)
Makefile
lxmppd.cfg.lua.dist [deleted file]
prosody.cfg.lua.dist [new file with mode: 0644]

index cca246a6b8b4274b5b26f73ccf338e3a374b2b22..f1c1a286c9353617b6a53ea08cd2cfe3e3d0f0da 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -18,7 +18,7 @@ install: prosody util/encodings.so util/encodings.so
        install -m644 net/* $(SOURCE)/net
        install -m644 util/* $(SOURCE)/util
        install -m644 plugins/* $(MODULES)
-       install -m644 prosody.cfg.lua $(CONFIG)
+       install -m644 prosody.cfg.lua.dist $(CONFIG)/prosody.cfg.lua
        $(MAKE) install -C util-src
 
 clean:
diff --git a/lxmppd.cfg.lua.dist b/lxmppd.cfg.lua.dist
deleted file mode 100644 (file)
index d2c6d3f..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
--- lxmppd Example Configuration File 
--- 
--- If it wasn't already obvious, -- starts a comment, and all 
--- text after it is ignored by lxmppd.
---
--- The config is split into sections, a global section, and one 
--- for each defined host that we serve. You can add as many host 
--- sections as you like.
---
--- Lists are written { "like", "this", "one" } 
--- Lists can also be of { 1, 2, 3 } numbers, etc. 
--- Either commas, or semi-colons; may be used
--- as seperators.
---
--- A table is a list of values, except each value has a name. An 
--- example would be:
---
--- logging = { type = "html", directory = "/var/logs", rotate = "daily" }
---
--- Whitespace (that is tabs, spaces, line breaks) is insignificant, so can 
--- be placed anywhere
--- that        you deem fitting. Youcouldalsoremoveitentirely,butforobviousrea
---sonsIdon'trecommendit.
---
--- Tip: You can check that the syntax of this file is correct when you have finished
--- by running: luac -p lxmppd.cfg.lua
--- If there are any errors, it will let you know what and where they are, otherwise it 
--- will keep quiet.
---
--- The only thing left to do is rename this file to remove the .dist ending, and fill in the 
--- blanks. Good luck, and happy Jabbering!
-
--- Global settings go in this section
-Host "*"
-       
-       -- This is the list of modules lxmppd will load on startup.
-       -- It looks for plugins/mod_modulename.lua, so make sure that exists too.
-       modules_enabled = {
-                               "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
-                               "legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
-                               "roster"; -- Allow users to have a roster. Recommended ;)
-                               "register"; -- Allow users to register on this server using a client
-                               "tls"; -- Add support for secure TLS on c2s/s2s connections
-                               "vcard"; -- Allow users to set vCards
-                               "private"; -- Private XML storage (for room bookmarks, etc.)
-                               "version"; -- Replies to server version requests
-                               "dialback"; -- s2s dialback support
-                         };
-       
-       -- These are the SSL/TLS-related settings. If you don't want
-       -- to use SSL/TLS, you may comment or remove this
-       ssl = { 
-               key = "certs/server.key";
-               certificate = "certs/server.crt";
-               }
-
--- This allows clients to connect to localhost. No harm in it.
-Host "localhost"
-
--- Section for example.com
--- (replace example.com with your domain name)
-Host "example.com"
-       -- Assign this host a certificate for TLS, otherwise it would use the one
-       -- set in the global section (if any).
-       -- Note that old-style SSL on port 5223 only supports one certificate, and will always
-       -- use the global one.
-       ssl = { 
-               key = "certs/example.com.key";
-               certificate = "certs/example.com.crt";
-               }
-
-Host "example.org"
-       enabled = false -- This will disable the host, preserving the config, but denying connections
-       
diff --git a/prosody.cfg.lua.dist b/prosody.cfg.lua.dist
new file mode 100644 (file)
index 0000000..7b9fe4d
--- /dev/null
@@ -0,0 +1,73 @@
+-- Prosody Example Configuration File 
+-- 
+-- If it wasn't already obvious, -- starts a comment, and all 
+-- text after it is ignored by Prosody.
+--
+-- The config is split into sections, a global section, and one 
+-- for each defined host that we serve. You can add as many host 
+-- sections as you like.
+--
+-- Lists are written { "like", "this", "one" } 
+-- Lists can also be of { 1, 2, 3 } numbers, etc. 
+-- Either commas, or semi-colons; may be used
+-- as seperators.
+--
+-- A table is a list of values, except each value has a name. An 
+-- example would be:
+--
+-- logging = { type = "html", directory = "/var/logs", rotate = "daily" }
+--
+-- Whitespace (that is tabs, spaces, line breaks) is insignificant, so can 
+-- be placed anywhere
+-- that        you deem fitting. Youcouldalsoremoveitentirely,butforobviousrea
+--sonsIdon'trecommendit.
+--
+-- Tip: You can check that the syntax of this file is correct when you have finished
+-- by running: luac -p prosody.cfg.lua
+-- If there are any errors, it will let you know what and where they are, otherwise it 
+-- will keep quiet.
+--
+-- The only thing left to do is rename this file to remove the .dist ending, and fill in the 
+-- blanks. Good luck, and happy Jabbering!
+
+-- Global settings go in this section
+Host "*"
+       
+       -- This is the list of modules Prosody will load on startup.
+       -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
+       modules_enabled = {
+                               "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
+                               "legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
+                               "roster"; -- Allow users to have a roster. Recommended ;)
+                               "register"; -- Allow users to register on this server using a client
+                               "tls"; -- Add support for secure TLS on c2s/s2s connections
+                               "vcard"; -- Allow users to set vCards
+                               "private"; -- Private XML storage (for room bookmarks, etc.)
+                               "version"; -- Replies to server version requests
+                               "dialback"; -- s2s dialback support
+                         };
+       
+       -- These are the SSL/TLS-related settings. If you don't want
+       -- to use SSL/TLS, you may comment or remove this
+       ssl = { 
+               key = "certs/server.key";
+               certificate = "certs/server.crt";
+               }
+
+-- This allows clients to connect to localhost. No harm in it.
+Host "localhost"
+
+-- Section for example.com
+-- (replace example.com with your domain name)
+Host "example.com"
+       -- Assign this host a certificate for TLS, otherwise it would use the one
+       -- set in the global section (if any).
+       -- Note that old-style SSL on port 5223 only supports one certificate, and will always
+       -- use the global one.
+       ssl = { 
+               key = "certs/example.com.key";
+               certificate = "certs/example.com.crt";
+               }
+
+       enabled = false -- This will disable the host, preserving the config, but denying connections
+